* [PATCH 5.15 000/731] 5.15.86-rc1 review
@ 2022-12-28 14:31 Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 001/731] drm/amd/display: Manually adjust strobe for DCN303 Greg Kroah-Hartman
` (741 more replies)
0 siblings, 742 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, linux-kernel, torvalds, akpm, linux,
shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow
This is the start of the stable review cycle for the 5.15.86 release.
There are 731 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri, 30 Dec 2022 14:41:39 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.86-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux 5.15.86-rc1
Yassine Oudjana <y.oudjana@protonmail.com>
extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered
Lin Ma <linma@zju.edu.cn>
media: dvbdev: fix refcnt bug
Lin Ma <linma@zju.edu.cn>
media: dvbdev: fix build warning due to comments
Gaosheng Cui <cuigaosheng1@huawei.com>
net: stmmac: fix errno when create_singlethread_workqueue() fails
Arun Easi <aeasi@marvell.com>
scsi: qla2xxx: Fix crash when I/O abort times out
Filipe Manana <fdmanana@suse.com>
btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range
Chen Zhongjin <chenzhongjin@huawei.com>
ovl: fix use inode directly in rcu-walk mode
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
fbdev: fbcon: release buffer when fbcon_do_set_font() failed
Rickard x Andersson <rickaran@axis.com>
gcov: add support for checksum field
Yuan Can <yuancan@huawei.com>
floppy: Fix memory leak in do_floppy_init()
Johan Hovold <johan+linaro@kernel.org>
regulator: core: fix deadlock on regulator enable
Rasmus Villemoes <linux@rasmusvillemoes.dk>
iio: adc128s052: add proper .data members in adc128_of_match table
Nuno Sá <nuno.sa@analog.com>
iio: adc: ad_sigma_delta: do not use internal iio_dev lock
Zeng Heng <zengheng4@huawei.com>
iio: fix memory leak in iio_device_register_eventset()
Roberto Sassu <roberto.sassu@huawei.com>
reiserfs: Add missing calls to reiserfs_security_free()
Nathan Chancellor <nathan@kernel.org>
security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
Schspa Shi <schspa@gmail.com>
9p: set req refcount to zero to avoid uninitialized usage
Isaac J. Manjarres <isaacmanjarres@google.com>
loop: Fix the max_loop commandline argument treatment when it is set to 0
Enrik Berkhan <Enrik.Berkhan@inka.de>
HID: mcp2221: don't connect hidraw
Jason Gerecke <killertofu@gmail.com>
HID: wacom: Ensure bootloader PID is usable in hidraw mode
Mathias Nyman <mathias.nyman@linux.intel.com>
xhci: Prevent infinite loop in transaction errors recovery for streams
Ferry Toth <ftoth@exalondelft.nl>
usb: dwc3: core: defer probe on ulpi_read_id timeout
Sven Peter <sven@svenpeter.dev>
usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_mode
Johan Hovold <johan+linaro@kernel.org>
arm64: dts: qcom: sm8250: fix USB-DP PHY registers
Chunfeng Yun <chunfeng.yun@mediatek.com>
usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq
Pawel Laszczak <pawell@cadence.com>
usb: cdnsp: fix lack of ZLP for ep0
Jiao Zhou <jiaozhou@google.com>
ALSA: hda/hdmi: Add HP Device 0x8711 to force connect list
Edward Pacman <edward@edward-p.xyz>
ALSA: hda/realtek: Add quirk for Lenovo TianYi510Pro-14IOB
wangdicheng <wangdicheng@kylinos.cn>
ALSA: usb-audio: add the quirk for KT0206 device
GUO Zihua <guozihua@huawei.com>
ima: Simplify ima_lsm_copy_rule
John Stultz <jstultz@google.com>
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
David Howells <dhowells@redhat.com>
afs: Fix lost servers_outstanding count
Yang Jihong <yangjihong1@huawei.com>
perf debug: Set debug_peo_args and redirect_to_stderr variable to correct values in perf_quiet_option()
John Stultz <jstultz@google.com>
pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
Kees Cook <keescook@chromium.org>
LoadPin: Ignore the "contents" argument of the LSM hooks
Khaled Almahallawy <khaled.almahallawy@intel.com>
drm/i915/display: Don't disable DDI/Transcoder when setting phy test pattern
Hans de Goede <hdegoede@redhat.com>
ASoC: rt5670: Remove unbalanced pm_runtime_put()
Wang Jingjin <wangjingjin1@huawei.com>
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
Marek Szyprowski <m.szyprowski@samsung.com>
ASoC: wm8994: Fix potential deadlock
Wang Yufen <wangyufen@huawei.com>
ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe()
Wang Jingjin <wangjingjin1@huawei.com>
ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume()
Wang Yufen <wangyufen@huawei.com>
ASoC: audio-graph-card: fix refcount leak of cpu_ep in __graph_for_each_link()
Wang Yufen <wangyufen@huawei.com>
ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe()
Cezary Rojewski <cezary.rojewski@intel.com>
ASoC: Intel: Skylake: Fix driver hang during shutdown
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
ALSA: hda: add snd_hdac_stop_streams() helper
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
ALSA/ASoC: hda: move/rename snd_hdac_ext_stop_streams to hdac_stream.c
Yang Yingliang <yangyingliang@huawei.com>
hwmon: (jc42) Fix missing unlock on error in jc42_write()
Tyler Hicks <code@tyhicks.com>
KVM: selftests: Fix build regression by using accessor function
Karolina Drobnik <karolinadrobnik@gmail.com>
tools/include: Add _RET_IP_ and math definitions to kernel.h
Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init()
Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()
Nathan Chancellor <nathan@kernel.org>
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
Nathan Chancellor <nathan@kernel.org>
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
Hawkins Jiawei <yin31149@gmail.com>
hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param()
Nathan Chancellor <nathan@kernel.org>
scsi: elx: libefc: Fix second parameter type in state callbacks
Bart Van Assche <bvanassche@acm.org>
scsi: ufs: Reduce the START STOP UNIT timeout
Justin Tee <justin.tee@broadcom.com>
scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs
Zhiqi Song <songzhiqi1@huawei.com>
crypto: hisilicon/hpre - fix resource leak in remove process
Xiu Jianfeng <xiujianfeng@huawei.com>
clk: st: Fix memory leak in st_of_quadfs_setup()
Shigeru Yoshida <syoshida@redhat.com>
media: si470x: Fix use-after-free in si470x_int_in_callback()
Wolfram Sang <wsa+renesas@sang-engineering.com>
mmc: renesas_sdhi: better reset from HS400 mode
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
mmc: f-sdh30: Add quirks for broken timeout clock capability
Lorenzo Bianconi <lorenzo@kernel.org>
wifi: mt76: do not run mt76u_status_worker if the device is not running
Rui Zhang <zr.zhang@vivo.com>
regulator: core: fix use_count leakage when handling boot-on
Andrii Nakryiko <andrii@kernel.org>
libbpf: Avoid enum forward-declarations in public API in C++ mode
Wesley Chalmers <Wesley.Chalmers@amd.com>
drm/amd/display: Use the largest vready_offset in pipe group
Ye Bin <yebin10@huawei.com>
blk-mq: fix possible memleak when register 'hctx' failed
Mazin Al Haddad <mazinalhaddad05@gmail.com>
media: dvb-usb: fix memory leak in dvb_usb_adapter_init()
Lin Ma <linma@zju.edu.cn>
media: dvbdev: adopts refcnt to avoid UAF
Yan Lei <yan_lei@dahuatech.com>
media: dvb-frontends: fix leak of memory fw
Maxim Korotkov <korotkov.maxim.s@gmail.com>
ethtool: avoiding integer overflow in ethtool_phys_id()
Stanislav Fomichev <sdf@google.com>
bpf: Prevent decl_tag from being referenced in func_proto arg
Stanislav Fomichev <sdf@google.com>
ppp: associate skb with a device at tx
Schspa Shi <schspa@gmail.com>
mrp: introduce active flags to prevent UAF when applicant uninit
Eric Dumazet <edumazet@google.com>
ipv6/sit: use DEV_STATS_INC() to avoid data-races
Eric Dumazet <edumazet@google.com>
net: add atomic_long_t to net_device_stats fields
Aurabindo Pillai <aurabindo.pillai@amd.com>
drm/amd/display: fix array index out of bound error in bios parser
Jiang Li <jiang.li@ugreen.com>
md/raid1: stop mdx_raid1 thread when raid1 array run failed
Li Zhong <floridsleeves@gmail.com>
drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
Nathan Chancellor <nathan@kernel.org>
drm/mediatek: Fix return type of mtk_hdmi_bridge_mode_valid()
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/sti: Use drm_mode_copy()
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/rockchip: Use drm_mode_copy()
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/msm: Use drm_mode_copy()
Nathan Chancellor <nathan@kernel.org>
s390/lcs: Fix return type of lcs_start_xmit()
Nathan Chancellor <nathan@kernel.org>
s390/netiucv: Fix return type of netiucv_tx()
Nathan Chancellor <nathan@kernel.org>
s390/ctcm: Fix return type of ctc{mp,}m_tx()
Nathan Chancellor <nathan@kernel.org>
drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback
Nathan Chancellor <nathan@kernel.org>
drm/amdgpu: Fix type of second parameter in trans_msg() callback
Kees Cook <keescook@chromium.org>
igb: Do not free q_vector unless new one was allocated
Minsuk Kang <linuxlovemin@yonsei.ac.kr>
wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
Nathan Chancellor <nathan@kernel.org>
hamradio: baycom_epp: Fix return type of baycom_send_packet()
Nathan Chancellor <nathan@kernel.org>
net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
Stanislav Fomichev <sdf@google.com>
bpf: make sure skb->len != 0 when redirecting to a tunneling device
Jiri Slaby (SUSE) <jirislaby@kernel.org>
qed (gcc13): use u16 for fid to be big enough
Hamza Mahfooz <hamza.mahfooz@amd.com>
Revert "drm/amd/display: Limit max DSC target bpp for specific monitors"
gehao <gehao@kylinos.cn>
drm/amd/display: prevent memory leak
Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
ipmi: fix memleak when unload ipmi driver
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
ASoC: codecs: rt298: Add quirk for KBL-R RVP platform
Shigeru Yoshida <syoshida@redhat.com>
wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out
Fedor Pchelkin <pchelkin@ispras.ru>
wifi: ath9k: verify the expected usb_endpoints are present
Wright Feng <wright.feng@cypress.com>
brcmfmac: return error when getting invalid max_flowrings from dongle
Ming Qian <ming.qian@nxp.com>
media: imx-jpeg: Disable useless interrupt to avoid kernel panic
Doug Brown <doug@schmorgal.com>
drm/etnaviv: add missing quirks for GC300
ZhangPeng <zhangpeng362@huawei.com>
hfs: fix OOB Read in __hfs_brec_find
Zheng Yejian <zhengyejian1@huawei.com>
acct: fix potential integer overflow in encode_comp_t()
Ryusuke Konishi <konishi.ryusuke@gmail.com>
nilfs2: fix shift-out-of-bounds due to too large exponent of block size
Ryusuke Konishi <konishi.ryusuke@gmail.com>
nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA: Fix error code path in acpi_ds_call_control_method()
Hoi Pok Wu <wuhoipok@gmail.com>
fs: jfs: fix shift-out-of-bounds in dbDiscardAG
Dr. David Alan Gilbert <linux@treblig.org>
jfs: Fix fortify moan in symlink
Shigeru Yoshida <syoshida@redhat.com>
udf: Avoid double brelse() in udf_rename()
Dongliang Mu <mudongliangabcd@gmail.com>
fs: jfs: fix shift-out-of-bounds in dbAllocAG
Liu Shixin <liushixin2@huawei.com>
binfmt_misc: fix shift-out-of-bounds in check_special_flags
Gaurav Kohli <gauravkohli@linux.microsoft.com>
x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
Guilherme G. Piccoli <gpiccoli@igalia.com>
video: hyperv_fb: Avoid taking busy spinlock on panic path
Mark Rutland <mark.rutland@arm.com>
arm64: make is_ttbrX_addr() noinstr-safe
Zqiang <qiang1.zhang@intel.com>
rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
Jiasheng Jiang <jiasheng@iscas.ac.cn>
HID: amd_sfh: Add missing check for dma_alloc_coherent
Eric Dumazet <edumazet@google.com>
net: stream: purge sk_error_queue in sk_stream_kill_queues()
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
myri10ge: Fix an error handling path in myri10ge_probe()
David Howells <dhowells@redhat.com>
rxrpc: Fix missing unlock in rxrpc_do_sendmsg()
Cong Wang <cong.wang@bytedance.com>
net_sched: reject TCF_EM_SIMPLE case for complex ematch module
Yang Yingliang <yangyingliang@huawei.com>
mailbox: zynq-ipi: fix error handling while device_register() fails
Yang Yingliang <yangyingliang@huawei.com>
mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
Conor Dooley <conor.dooley@microchip.com>
mailbox: mpfs: read the system controller's status
Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
skbuff: Account for tail adjustment during pull operations
Chen-Yu Tsai <wenst@chromium.org>
arm64: dts: mt8183: Fix Mali GPU clock
Chun-Jie Chen <chun-jie.chen@mediatek.com>
soc: mediatek: pm-domains: Fix the power glitch issue
Eelco Chaudron <echaudro@redhat.com>
openvswitch: Fix flow lookup to use unmasked key
Jakub Kicinski <kuba@kernel.org>
selftests: devlink: fix the fd redirect in dummy_reporter_test
GUO Zihua <guozihua@huawei.com>
rtc: mxc_v2: Add missing clk_disable_unprepare()
Tan Tee Min <tee.min.tan@linux.intel.com>
igc: Set Qbv start_time and end_time to end_time if not being configured in GCL
Kurt Kanzenbach <kurt@linutronix.de>
igc: Lift TAPRIO schedule restriction
Tan Tee Min <tee.min.tan@linux.intel.com>
igc: recalculate Qbv end_time by considering cycle time
Tan Tee Min <tee.min.tan@linux.intel.com>
igc: allow BaseTime 0 enrollment for Qbv
Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
igc: Add checking for basetime less than zero
Vinicius Costa Gomes <vinicius.gomes@intel.com>
igc: Use strict cycles for Qbv scheduling
Vinicius Costa Gomes <vinicius.gomes@intel.com>
igc: Enhance Qbv scheduling by using first flag bit
Christoph Hellwig <hch@lst.de>
blk-iocost: simplify ioc_name
Li Zetao <lizetao1@huawei.com>
r6040: Fix kmemleak in probe and remove
Kirill Tkhai <tkhai@ya.ru>
unix: Fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()
Minsuk Kang <linuxlovemin@yonsei.ac.kr>
nfc: pn533: Clear nfc_target before being used
Vladimir Oltean <vladimir.oltean@nxp.com>
net: enetc: avoid buffer leaks on xdp_do_redirect() failure
Kumar Kartikeya Dwivedi <memxor@gmail.com>
selftests/bpf: Add test for unstable CT lookup API
Yu Kuai <yukuai3@huawei.com>
block, bfq: fix possible uaf for 'bfqq->bic'
Yang Yingliang <yangyingliang@huawei.com>
mISDN: hfcmulti: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
mISDN: hfcpci: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
mISDN: hfcsusb: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
Emeel Hakim <ehakim@nvidia.com>
net: macsec: fix net device access prior to holding a lock
Dan Aloni <dan.aloni@vastdata.com>
nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
Alexandre Belloni <alexandre.belloni@bootlin.com>
rtc: pcf85063: fix pcf85063_clkout_control
Gaosheng Cui <cuigaosheng1@huawei.com>
rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe()
Gaosheng Cui <cuigaosheng1@huawei.com>
rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()
Qingfang DENG <dqfext@gmail.com>
netfilter: flowtable: really fix NAT IPv6 offload
Yang Yingliang <yangyingliang@huawei.com>
mfd: pm8008: Fix return value check in pm8008_probe()
Lee Jones <lee.jones@linaro.org>
mfd: pm8008: Remove driver data structure pm8008_data
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
Nathan Lynch <nathanl@linux.ibm.com>
powerpc/pseries/eeh: use correct API for error log size
Haowen Bai <baihaowen@meizu.com>
powerpc/eeh: Drop redundant spinlock initialization
Shang XiaoJing <shangxiaojing@huawei.com>
remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
Yuan Can <yuancan@huawei.com>
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
Luca Weiss <luca.weiss@fairphone.com>
remoteproc: qcom_q6v5_pas: detach power domains on remove
Luca Weiss <luca.weiss@fairphone.com>
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
Shang XiaoJing <shangxiaojing@huawei.com>
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
Gaosheng Cui <cuigaosheng1@huawei.com>
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
Daniel Golle <daniel@makrotopia.org>
pwm: mediatek: always use bus clock for PWM on MT7622
xinlei lee <xinlei.lee@mediatek.com>
pwm: mtk-disp: Fix the parameters calculated by the enabled flag of disp_pwm
Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
pwm: sifive: Call pwm_sifive_update_clock() while mutex is held
Jason Gunthorpe <jgg@ziepe.ca>
iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
Miaoqian Lin <linmq006@gmail.com>
selftests/powerpc: Fix resource leaks
Kajol Jain <kjain@linux.ibm.com>
powerpc/hv-gpci: Fix hv_gpci event list
Yang Yingliang <yangyingliang@huawei.com>
powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe()
Nicholas Piggin <npiggin@gmail.com>
powerpc/perf: callchain validate kernel stack pointer bounds
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
phy: qcom-qmp: create copies of QMP PHY driver
Yang Yingliang <yangyingliang@huawei.com>
powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()
Gustavo A. R. Silva <gustavoars@kernel.org>
powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds
Miaoqian Lin <linmq006@gmail.com>
cxl: Fix refcount leak in cxl_calc_capp_routing
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
powerpc/52xx: Fix a resource leak in an error handling path
Xie Shaowen <studentxswpy@163.com>
macintosh/macio-adb: check the return value of ioremap()
Yang Yingliang <yangyingliang@huawei.com>
macintosh: fix possible memory leak in macio_add_one_device()
Yuan Can <yuancan@huawei.com>
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
Yang Yingliang <yangyingliang@huawei.com>
iommu/amd: Fix pci device refcount leak in ppr_notifier()
Alexander Stein <alexander.stein@ew.tq-group.com>
rtc: pcf85063: Fix reading alarm
Stefan Eichenberger <stefan.eichenberger@toradex.com>
rtc: snvs: Allow a time difference on clock register read
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
rtc: cmos: Disable ACPI RTC event on removal
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
rtc: cmos: Rename ACPI-related functions
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
rtc: cmos: Eliminate forward declarations of some functions
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
rtc: cmos: Call rtc_wake_setup() from cmos_do_probe()
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
rtc: cmos: Call cmos_wake_setup() from cmos_do_probe()
Alexandre Belloni <alexandre.belloni@bootlin.com>
rtc: cmos: fix build on non-ACPI platforms
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
rtc: cmos: Fix wake alarm breakage
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
rtc: cmos: Fix event handler registration ordering issue
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
Fenghua Yu <fenghua.yu@intel.com>
dmaengine: idxd: Fix crc_val field for completion record
Abdun Nihaal <abdun.nihaal@gmail.com>
fs/ntfs3: Fix slab-out-of-bounds read in ntfs_trim_fs
Jon Hunter <jonathanh@nvidia.com>
pwm: tegra: Improve required rate calculation
Matt Redfearn <matt.redfearn@mips.com>
include/uapi/linux/swab: Fix potentially missing __always_inline
Al Cooper <alcooperx@gmail.com>
phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices
Michael Riesch <michael.riesch@wolfvision.net>
iommu/rockchip: fix permission bits in page table entries v2
Jernej Skrabec <jernej.skrabec@gmail.com>
iommu/sun50i: Fix flush size
Jernej Skrabec <jernej.skrabec@gmail.com>
iommu/sun50i: Fix R/W permission check
Jernej Skrabec <jernej.skrabec@gmail.com>
iommu/sun50i: Consider all fault sources for reset
Jernej Skrabec <jernej.skrabec@gmail.com>
iommu/sun50i: Fix reset release
Dan Carpenter <dan.carpenter@oracle.com>
fs/ntfs3: Harden against integer overflows
Kees Cook <keescook@chromium.org>
overflow: Implement size_t saturating arithmetic helpers
Shigeru Yoshida <syoshida@redhat.com>
fs/ntfs3: Avoid UBSAN error on true_sectors_per_clst()
Arnd Bergmann <arnd@arndb.de>
RDMA/siw: Fix pointer cast warning
Namhyung Kim <namhyung@kernel.org>
perf stat: Do not delay the workload with --delay
Adrián Herrera Arcila <adrian.herrera@arm.com>
perf stat: Refactor __run_perf_stat() common code
ruanjinjie <ruanjinjie@huawei.com>
power: supply: fix null pointer dereferencing in power_supply_get_battery_info
Yuan Can <yuancan@huawei.com>
power: supply: ab8500: Fix error handling in ab8500_charger_init()
Yuan Can <yuancan@huawei.com>
HSI: omap_ssi_core: Fix error handling in ssi_init()
Zhang Qilong <zhangqilong3@huawei.com>
power: supply: z2_battery: Fix possible memleak in z2_batt_probe()
Ajay Kaher <akaher@vmware.com>
perf symbol: correction while adjusting symbol
Leo Yan <leo.yan@linaro.org>
perf trace: Handle failure when trace point folder is missed
Leo Yan <leo.yan@linaro.org>
perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number
Leo Yan <leo.yan@linaro.org>
perf trace: Return error if a system call doesn't exist
Zeng Heng <zengheng4@huawei.com>
power: supply: fix residue sysfs file in error handle route of __power_supply_register()
Yang Yingliang <yangyingliang@huawei.com>
HSI: omap_ssi_core: fix possible memory leak in ssi_probe()
Yang Yingliang <yangyingliang@huawei.com>
HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
Randy Dunlap <rdunlap@infradead.org>
fbdev: uvesafb: don't build on UML
Randy Dunlap <rdunlap@infradead.org>
fbdev: geode: don't build on UML
Gaosheng Cui <cuigaosheng1@huawei.com>
fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe()
Xiongfeng Wang <wangxiongfeng2@huawei.com>
fbdev: vermilion: decrease reference count in error path
Shang XiaoJing <shangxiaojing@huawei.com>
fbdev: via: Fix error in via_core_init()
Yang Yingliang <yangyingliang@huawei.com>
fbdev: pm2fb: fix missing pci_disable_device()
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
fbdev: ssd1307fb: Drop optional dependency
Bjorn Andersson <bjorn.andersson@linaro.org>
thermal/drivers/qcom/lmh: Fix irq handler return value
Luca Weiss <luca.weiss@fairphone.com>
thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2
Marcus Folkesson <marcus.folkesson@gmail.com>
thermal/drivers/imx8mm_thermal: Validate temperature range
Shang XiaoJing <shangxiaojing@huawei.com>
samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
Xiu Jianfeng <xiujianfeng@huawei.com>
ksmbd: Fix resource leak in ksmbd_session_rpc_open()
Zheng Yejian <zhengyejian1@huawei.com>
tracing/hist: Fix issue of losting command info in error_log
Jiasheng Jiang <jiasheng@iscas.ac.cn>
usb: storage: Add check for kcalloc
Zheyu Ma <zheyuma97@gmail.com>
i2c: ismt: Fix an out-of-bounds bug in ismt_access()
Yang Yingliang <yangyingliang@huawei.com>
i2c: mux: reg: check return value after calling platform_get_resource()
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpiolib: protect the GPIO device against being dropped while in use by user-space
Bartosz Golaszewski <brgl@bgdev.pl>
gpiolib: make struct comments into real kernel docs
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpiolib: cdev: fix NULL-pointer dereferences
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
gpiolib: Get rid of redundant 'else'
Chen Zhongjin <chenzhongjin@huawei.com>
vme: Fix error not catched in fake_init()
YueHaibing <yuehaibing@huawei.com>
staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor()
Dan Carpenter <error27@gmail.com>
staging: rtl8192u: Fix use after free in ieee80211_rx()
Hui Tang <tanghui20@huawei.com>
i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
Yang Yingliang <yangyingliang@huawei.com>
chardev: fix error handling in cdev_device_add()
Yang Yingliang <yangyingliang@huawei.com>
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
Zhengchao Shao <shaozhengchao@huawei.com>
drivers: mcb: fix resource leak in mcb_probe()
John Keeping <john@metanate.com>
usb: gadget: f_hid: fix refcount leak on error path
John Keeping <john@metanate.com>
usb: gadget: f_hid: fix f_hidg lifetime vs cdev
Yang Yingliang <yangyingliang@huawei.com>
usb: roles: fix of node refcount leak in usb_role_switch_is_parent()
Yang Shen <shenyang39@huawei.com>
coresight: trbe: remove cpuhp instance node before remove cpuhp state
Fabrice Gasnier <fabrice.gasnier@foss.st.com>
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
Ramona Bolboaca <ramona.bolboaca@analog.com>
iio: adis: add '__adis_enable_irq()' implementation
Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio:imu:adis: Move exports into IIO_ADISLIB namespace
Nuno Sá <nuno.sa@analog.com>
iio: adis: stylistic changes
Nuno Sá <nuno.sa@analog.com>
iio: adis: handle devices that cannot unmask the drdy pin
Cosmin Tanislav <cosmin.tanislav@analog.com>
iio: temperature: ltc2983: make bulk write buffer DMA-safe
Yang Yingliang <yangyingliang@huawei.com>
cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
Yang Yingliang <yangyingliang@huawei.com>
cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()
Yang Yingliang <yangyingliang@huawei.com>
firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()
Zheng Wang <zyytlz.wz@163.com>
misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os
ruanjinjie <ruanjinjie@huawei.com>
misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()
Yang Yingliang <yangyingliang@huawei.com>
ocxl: fix pci device refcount leak when calling get_function_0()
Yang Yingliang <yangyingliang@huawei.com>
misc: ocxl: fix possible name leak in ocxl_file_register_afu()
Zhengchao Shao <shaozhengchao@huawei.com>
test_firmware: fix memory leak in test_firmware_init()
Yuan Can <yuancan@huawei.com>
serial: sunsab: Fix error handling in sunsab_init()
Gabriel Somlo <gsomlo@gmail.com>
serial: altera_uart: fix locking in polling mode
Jiri Slaby <jirislaby@kernel.org>
tty: serial: altera_uart_{r,t}x_chars() need only uart_port
Jiri Slaby <jirislaby@kernel.org>
tty: serial: clean up stop-tx part in altera_uart_tx_chars()
Xiongfeng Wang <wangxiongfeng2@huawei.com>
serial: pch: Fix PCI device refcount leak in pch_request_dma()
Valentin Caron <valentin.caron@foss.st.com>
serial: stm32: move dma_request_chan() before clk_prepare_enable()
delisun <delisun@pateo.com.cn>
serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
Jiamei Xie <jiamei.xie@arm.com>
serial: amba-pl011: avoid SBSA UART accessing DMACR register
Marek Vasut <marex@denx.de>
extcon: usbc-tusb320: Update state on probe even if no IRQ pending
Marek Vasut <marex@denx.de>
extcon: usbc-tusb320: Add USB TYPE-C support
Marek Vasut <marex@denx.de>
extcon: usbc-tusb320: Factor out extcon into dedicated functions
Samuel Holland <samuel@sholland.org>
usb: typec: Factor out non-PD fwnode properties
Yassine Oudjana <y.oudjana@protonmail.com>
extcon: usbc-tusb320: Add support for TUSB320L
Yassine Oudjana <y.oudjana@protonmail.com>
extcon: usbc-tusb320: Add support for mode setting and reset
Sven Peter <sven@svenpeter.dev>
usb: typec: tipd: Fix spurious fwnode_handle_put in error path
Sven Peter <sven@svenpeter.dev>
usb: typec: tipd: Cleanup resources if devm_tps6598_psy_register fails
Yang Yingliang <yangyingliang@huawei.com>
usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()
Sven Peter <sven@svenpeter.dev>
usb: typec: Check for ops->exit instead of ops->enter in altmode_exit
Gaosheng Cui <cuigaosheng1@huawei.com>
staging: vme_user: Fix possible UAF in tsi148_dma_list_add
Linus Walleij <linus.walleij@linaro.org>
usb: fotg210-udc: Fix ages old endianness issues
Rafael Mendonca <rafaelmendsr@gmail.com>
uio: uio_dmem_genirq: Fix deadlock between irq config and handling
Rafael Mendonca <rafaelmendsr@gmail.com>
uio: uio_dmem_genirq: Fix missing unlock in irq configuration
Rafael Mendonca <rafaelmendsr@gmail.com>
vfio: platform: Do not pass return buffer to ACPI _RST method
Yang Yingliang <yangyingliang@huawei.com>
class: fix possible memory leak in __class_register()
Yuan Can <yuancan@huawei.com>
serial: 8250_bcm7271: Fix error handling in brcmuart_init()
Kartik <kkartik@nvidia.com>
serial: tegra: Read DMA status before terminating
Yang Yingliang <yangyingliang@huawei.com>
drivers: dio: fix possible memory leak in dio_init()
Palmer Dabbelt <palmer@rivosinc.com>
RISC-V: Align the shadow stack
Dragos Tatulea <dtatulea@nvidia.com>
IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
Xiongfeng Wang <wangxiongfeng2@huawei.com>
hwrng: geode - Fix PCI device refcount leak
Xiongfeng Wang <wangxiongfeng2@huawei.com>
hwrng: amd - Fix PCI device refcount leak
Gaosheng Cui <cuigaosheng1@huawei.com>
crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
Chengchang Tang <tangchengchang@huawei.com>
RDMA/hns: Fix error code of CMD
Chengchang Tang <tangchengchang@huawei.com>
RDMA/hns: Fix page size cap from firmware
Chengchang Tang <tangchengchang@huawei.com>
RDMA/hns: Fix PBL page MTR find
Chengchang Tang <tangchengchang@huawei.com>
RDMA/hns: Fix AH attr queried by query_qp
Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
orangefs: Fix sysfs not cleanup when dev init failed
John Thomson <git@johnthomson.fastmail.com.au>
PCI: mt7621: Add sentinel to quirks table
Bjorn Helgaas <bhelgaas@google.com>
PCI: mt7621: Rename mt7621_pci_ to mt7621_pcie_
Wang Yufen <wangyufen@huawei.com>
RDMA/srp: Fix error return code in srp_parse_options()
Wang Yufen <wangyufen@huawei.com>
RDMA/hfi1: Fix error return code in parse_platform_config()
Tong Tiangen <tongtiangen@huawei.com>
riscv/mm: add arch hook arch_clear_hugepage_flags
Shang XiaoJing <shangxiaojing@huawei.com>
crypto: omap-sham - Use pm_runtime_resume_and_get() in omap_sham_probe()
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
crypto: amlogic - Remove kcalloc without check
Mark Zhang <markzhang@nvidia.com>
RDMA/nldev: Fix failure to send large messages
Yonggil Song <yonggil.song@samsung.com>
f2fs: avoid victim selection from previous victim section
Yuan Can <yuancan@huawei.com>
RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps()
Gaosheng Cui <cuigaosheng1@huawei.com>
scsi: snic: Fix possible UAF in snic_tgt_create()
Chen Zhongjin <chenzhongjin@huawei.com>
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
Shang XiaoJing <shangxiaojing@huawei.com>
scsi: ipr: Fix WARNING in ipr_init()
Yang Yingliang <yangyingliang@huawei.com>
scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper()
Yang Yingliang <yangyingliang@huawei.com>
scsi: fcoe: Fix possible name leak when device_register() fails
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
scsi: scsi_debug: Fix a warning in resp_report_zones()
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
scsi: scsi_debug: Fix a warning in resp_verify()
Chen Zhongjin <chenzhongjin@huawei.com>
scsi: efct: Fix possible memleak in efct_device_init()
Yang Yingliang <yangyingliang@huawei.com>
scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()
Yang Yingliang <yangyingliang@huawei.com>
scsi: hpsa: Fix error handling in hpsa_add_sas_host()
Yang Yingliang <yangyingliang@huawei.com>
scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()
Daniel Jordan <daniel.m.jordan@oracle.com>
padata: Fix list iterator in padata_do_serial()
Daniel Jordan <daniel.m.jordan@oracle.com>
padata: Always leave BHs disabled when running ->parallel()
Zhang Yiqun <zhangyiqun@phytium.com.cn>
crypto: tcrypt - Fix multibuffer skcipher speed test mem leak
Yuan Can <yuancan@huawei.com>
scsi: hpsa: Fix possible memory leak in hpsa_init_one()
Serge Semin <Sergey.Semin@baikalelectronics.ru>
dt-bindings: visconti-pcie: Fix interrupts array max constraints
Serge Semin <Sergey.Semin@baikalelectronics.ru>
dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq
Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed
Zhengchao Shao <shaozhengchao@huawei.com>
RDMA/hns: fix memory leak in hns_roce_alloc_mr()
Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
crypto: ccree - Make cc_debugfs_global_fini() available for module init function
Xiongfeng Wang <wangxiongfeng2@huawei.com>
RDMA/hfi: Decrease PCI device reference count in error path
Zeng Heng <zengheng4@huawei.com>
PCI: Check for alloc failure in pci_request_irq()
Luoyouming <luoyouming@huawei.com>
RDMA/hns: Fix ext_sge num error when post send
Luoyouming <luoyouming@huawei.com>
RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data()
Xiongfeng Wang <wangxiongfeng2@huawei.com>
crypto: hisilicon/qm - add missing pci_dev_put() in q_num_set()
Herbert Xu <herbert@gondor.apana.org.au>
crypto: cryptd - Use request context instead of stack for sub-request
Gaosheng Cui <cuigaosheng1@huawei.com>
crypto: ccree - Remove debugfs when platform_driver_register failed
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
scsi: scsi_debug: Fix a warning in resp_write_scat()
Bernard Metzler <bmt@zurich.ibm.com>
RDMA/siw: Set defined status for work completion with undefined status
Mark Zhang <markzhang@nvidia.com>
RDMA/nldev: Return "-EAGAIN" if the cm_id isn't from expected port
Mark Zhang <markzhang@nvidia.com>
RDMA/core: Make sure "ib_port" is valid when access sysfs node
Mark Zhang <markzhang@nvidia.com>
RDMA/restrack: Release MR restrack when delete
Nirmal Patel <nirmal.patel@linux.intel.com>
PCI: vmd: Disable MSI remapping after suspend
Leonid Ravich <lravich@gmail.com>
IB/mad: Don't call to function that might sleep while in atomic context
Bernard Metzler <bmt@zurich.ibm.com>
RDMA/siw: Fix immediate work request flush to completion queue
Bart Van Assche <bvanassche@acm.org>
scsi: qla2xxx: Fix set-but-not-used variable warnings
Shiraz Saleem <shiraz.saleem@intel.com>
RDMA/irdma: Report the correct link speed
Chao Yu <chao@kernel.org>
f2fs: fix to destroy sbi->post_read_wq in error path of f2fs_fill_super()
Dongdong Zhang <zhangdongdong1@oppo.com>
f2fs: fix normal discard process
Chao Yu <chao@kernel.org>
f2fs: fix to invalidate dcc->f2fs_issue_discard in error path
Xiu Jianfeng <xiujianfeng@huawei.com>
apparmor: Fix memleak in alloc_ns()
Corentin Labbe <clabbe@baylibre.com>
crypto: rockchip - rework by using crypto_engine
Corentin Labbe <clabbe@baylibre.com>
crypto: rockchip - remove non-aligned handling
Corentin Labbe <clabbe@baylibre.com>
crypto: rockchip - better handle cipher key
Corentin Labbe <clabbe@baylibre.com>
crypto: rockchip - add fallback for ahash
Corentin Labbe <clabbe@baylibre.com>
crypto: rockchip - add fallback for cipher
Corentin Labbe <clabbe@baylibre.com>
crypto: rockchip - do not store mode globally
Corentin Labbe <clabbe@baylibre.com>
crypto: rockchip - do not do custom power management
Zhang Qilong <zhangqilong3@huawei.com>
f2fs: Fix the race condition of resize flag between resizefs
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
PCI: pci-epf-test: Register notifier if only core_init_notifier is enabled
Leon Romanovsky <leon@kernel.org>
RDMA/core: Fix order of nldev_exit call
Vidya Sagar <vidyas@nvidia.com>
PCI: dwc: Fix n_fts[] array overrun
Xiu Jianfeng <xiujianfeng@huawei.com>
apparmor: Use pointer to struct aa_label for lbs_cred
Bart Van Assche <bvanassche@acm.org>
scsi: core: Fix a race between scsi_done() and scsi_timeout()
Natalia Petrova <n.petrova@fintech.ru>
crypto: nitrox - avoid double free on error path in nitrox_sriov_init()
Corentin Labbe <clabbe@baylibre.com>
crypto: sun8i-ss - use dma_addr instead u32
Weili Qian <qianweili@huawei.com>
crypto: hisilicon/qm - fix missing destroy qp_idr
John Johansen <john.johansen@canonical.com>
apparmor: Fix abi check to include v8 abi
John Johansen <john.johansen@canonical.com>
apparmor: fix lockdep warning when removing a namespace
Gaosheng Cui <cuigaosheng1@huawei.com>
apparmor: fix a memleak in multi_transaction_new()
Vladimir Oltean <vladimir.oltean@nxp.com>
net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path
Bartosz Staszewski <bartoszx.staszewski@intel.com>
i40e: Fix the inability to attach XDP program on downed interface
Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
stmmac: fix potential division by 0
Yang Yingliang <yangyingliang@huawei.com>
Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()
Wang ShaoBo <bobo.shaobowang@huawei.com>
Bluetooth: btintel: Fix missing free skb in btintel_setup_combined()
Inga Stotland <inga.stotland@intel.com>
Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMS
Firo Yang <firo.yang@suse.com>
sctp: sysctl: make extra pointers netns aware
Eric Pilmore <epilmore@gigaio.com>
ntb_netdev: Use dev_kfree_skb_any() in interrupt context
Jerry Ray <jerry.ray@microchip.com>
net: lan9303: Fix read error execution path
Markus Schneider-Pargmann <msp@baylibre.com>
can: tcan4x5x: Fix use of register error status mask
Vivek Yadav <vivek.2311@samsung.com>
can: m_can: Call the RAM init directly from m_can_chip_config
Markus Schneider-Pargmann <msp@baylibre.com>
can: tcan4x5x: Remove invalid write in clear_interrupts
Tom Lendacky <thomas.lendacky@amd.com>
net: amd-xgbe: Check only the minimum speed for active/passive cables
Tom Lendacky <thomas.lendacky@amd.com>
net: amd-xgbe: Fix logic around active and passive cables
Yang Yingliang <yangyingliang@huawei.com>
af_unix: call proto_unregister() in the error path in af_unix_init()
Yang Yingliang <yangyingliang@huawei.com>
net: amd: lance: don't call dev_kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
hamradio: don't call dev_kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
net: ethernet: dnet: don't call dev_kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
net: emaclite: don't call dev_kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
net: apple: bmac: don't call dev_kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
net: apple: mace: don't call dev_kfree_skb() under spin_lock_irqsave()
Hangbin Liu <liuhangbin@gmail.com>
net/tunnel: wait until all sk_user_data reader finish before releasing the sock
Li Zetao <lizetao1@huawei.com>
net: farsync: Fix kmemleak when rmmods farsync
Yang Yingliang <yangyingliang@huawei.com>
ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()
ruanjinjie <ruanjinjie@huawei.com>
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
Yuan Can <yuancan@huawei.com>
drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()
Gaosheng Cui <cuigaosheng1@huawei.com>
net: stmmac: fix possible memory leak in stmmac_dvr_probe()
Zhang Changzhong <zhangchangzhong@huawei.com>
net: stmmac: selftests: fix potential memleak in stmmac_test_arpoffload()
Yongqiang Liu <liuyongqiang13@huawei.com>
net: defxx: Fix missing err handling in dfx_init()
Artem Chernyshev <artem.chernyshev@red-soft.ru>
net: vmw_vsock: vmci: Check memcpy_from_msg()
Xiu Jianfeng <xiujianfeng@huawei.com>
clk: socfpga: Fix memory leak in socfpga_gate_init()
Björn Töpel <bjorn@rivosinc.com>
bpf: Do not zero-extend kfunc return values
Yang Jihong <yangjihong1@huawei.com>
blktrace: Fix output non-blktrace event when blk_classic option enabled
Wang Yufen <wangyufen@huawei.com>
wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()
Bitterblue Smith <rtl8821cerfe2@gmail.com>
wifi: rtl8xxxu: Fix the channel width reporting
Bitterblue Smith <rtl8821cerfe2@gmail.com>
wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h
Kris Bahnsen <kris@embeddedTS.com>
spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode
Xiu Jianfeng <xiujianfeng@huawei.com>
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
Jiasheng Jiang <jiasheng@iscas.ac.cn>
media: coda: Add check for kmalloc
Jiasheng Jiang <jiasheng@iscas.ac.cn>
media: coda: Add check for dcoda_iram_alloc
Liang He <windhl@126.com>
media: c8sectpfe: Add of_node_put() when breaking out of loop
Yuan Can <yuancan@huawei.com>
regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe()
Zhen Lei <thunder.leizhen@huawei.com>
mmc: core: Normalize the error handling branch in sd_read_ext_regs()
Jiasheng Jiang <jiasheng@iscas.ac.cn>
memstick/ms_block: Add check for alloc_ordered_workqueue
Luis Chamberlain <mcgrof@kernel.org>
memstick: ms_block: Add error handling support for add_disk()
Wolfram Sang <wsa+renesas@sang-engineering.com>
mmc: renesas_sdhi: alway populate SCC pointer
Yang Yingliang <yangyingliang@huawei.com>
mmc: mmci: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: wbsd: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: via-sdmmc: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: meson-gx: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: omap_hsmmc: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: atmel-mci: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: wmt-sdmmc: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: vub300: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: toshsd: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: rtsx_pci: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: pxamci: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: mxcmmc: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: moxart: fix return value check of mmc_add_host()
Yang Yingliang <yangyingliang@huawei.com>
mmc: alcor: fix return value check of mmc_add_host()
Pu Lehui <pulehui@huawei.com>
riscv, bpf: Emit fixed-length instructions for BPF_PSEUDO_FUNC
Trond Myklebust <trond.myklebust@hammerspace.com>
NFSv4.x: Fail client initialisation if state manager thread can't run
Wang ShaoBo <bobo.shaobowang@huawei.com>
SUNRPC: Fix missing release socket in rpc_sockname()
Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
xprtrdma: Fix regbuf data not freed in rpcrdma_req_create()
Gaosheng Cui <cuigaosheng1@huawei.com>
ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
Liu Shixin <liushixin2@huawei.com>
media: saa7164: fix missing pci_disable_device()
Takashi Iwai <tiwai@suse.de>
ALSA: pcm: Set missing stop_operating flag at undoing trigger start
Eric Dumazet <edumazet@google.com>
bpf, sockmap: fix race in sock_map_free()
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
hwmon: (jc42) Restore the min/max/critical temperatures on resume
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
hwmon: (jc42) Convert register access and caching to regmap/regcache
Yang Yingliang <yangyingliang@huawei.com>
regulator: core: fix resource leak in regulator_register()
Chen Zhongjin <chenzhongjin@huawei.com>
configfs: fix possible memory leak in configfs_create_dir()
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
hsr: Synchronize sequence number updates.
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
hsr: Synchronize sending frames to have always incremented outgoing seq nr.
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
hsr: Disable netpoll.
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
hsr: Avoid double remove of a node.
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
hsr: Add a rcu-read lock to hsr_forward_skb().
Christian Marangi <ansuelsmth@gmail.com>
clk: qcom: clk-krait: fix wrong div2 functions
Douglas Anderson <dianders@chromium.org>
clk: qcom: lpass-sc7180: Fix pm_runtime usage
Yang Yingliang <yangyingliang@huawei.com>
regulator: core: fix module refcount leak in set_supply()
Deren Wu <deren.wu@mediatek.com>
wifi: mt76: fix coverity overrun-call in mt76_get_txpower()
Lorenzo Bianconi <lorenzo@kernel.org>
wifi: mt76: mt7921: fix reporting of TX AGGR histogram
Xing Song <xing.song@mediatek.com>
mt76: stop the radar detector after leaving dfs channel
Chen Zhongjin <chenzhongjin@huawei.com>
wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() fails
Zhengchao Shao <shaozhengchao@huawei.com>
wifi: mac80211: fix memory leak in ieee80211_if_add()
Alexander Sverdlin <alexander.sverdlin@siemens.com>
spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE
Dan Carpenter <error27@gmail.com>
bonding: uninitialized variable in bond_miimon_inspect()
Pengcheng Yang <yangpc@wangsu.com>
bpf, sockmap: Fix data loss caused by using apply_bytes on ingress redirect
Pengcheng Yang <yangpc@wangsu.com>
bpf, sockmap: Fix missing BPF_F_INGRESS flag when using apply_bytes
Pengcheng Yang <yangpc@wangsu.com>
bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data
Randy Dunlap <rdunlap@infradead.org>
Input: wistron_btns - disable on UML
Florian Westphal <fw@strlen.de>
netfilter: conntrack: set icmpv6 redirects as RELATED
Zhang Qilong <zhangqilong3@huawei.com>
ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe
Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
drm/amdkfd: Fix memory leakage
Xiongfeng Wang <wangxiongfeng2@huawei.com>
drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()
Xiongfeng Wang <wangxiongfeng2@huawei.com>
drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()
Guchun Chen <guchun.chen@amd.com>
drm/amd/pm/smu11: BACO is supported when it's in BACO state
Ricardo Ribalda <ribalda@chromium.org>
ASoC: mediatek: mt8173: Enable IRQ when pdata is ready
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
ASoC: mediatek: mt8173: Fix debugfs registration for components
Ben Greear <greearb@candelatech.com>
wifi: iwlwifi: mvm: fix double free on tx path.
Liu Shixin <liushixin2@huawei.com>
ALSA: asihpi: fix missing pci_disable_device()
Trond Myklebust <trond.myklebust@hammerspace.com>
NFS: Fix an Oops in nfs_d_automount()
Trond Myklebust <trond.myklebust@hammerspace.com>
NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
Trond Myklebust <trond.myklebust@hammerspace.com>
NFSv4: Fix a credential leak in _nfs4_discover_trunking()
Trond Myklebust <trond.myklebust@hammerspace.com>
NFSv4.2: Fix initialisation of struct nfs4_label
Trond Myklebust <trond.myklebust@hammerspace.com>
NFSv4.2: Fix a memory stomp in decode_attr_security_label
Trond Myklebust <trond.myklebust@hammerspace.com>
NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding
Jiasheng Jiang <jiasheng@iscas.ac.cn>
ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_snd
Dmitry Torokhov <dmitry.torokhov@gmail.com>
ASoC: dt-bindings: wcd9335: fix reset line polarity in example
Zhang Zekun <zhangzekun11@huawei.com>
drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe()
Aakarsh Jain <aakarsh.jain@samsung.com>
media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC
Baisong Zhong <zhongbaisong@huawei.com>
media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()
Chen Zhongjin <chenzhongjin@huawei.com>
media: dvb-core: Fix ignored return value in dvb_register_frontend()
ZhangPeng <zhangpeng362@huawei.com>
pinctrl: pinconf-generic: add missing of_node_put()
Dario Binacchi <dario.binacchi@amarulasolutions.com>
clk: imx8mn: fix imx8mn_enet_phy_sels clocks list
Dario Binacchi <dario.binacchi@amarulasolutions.com>
clk: imx8mn: fix imx8mn_sai2_sels clocks list
Dario Binacchi <dario.binacchi@amarulasolutions.com>
clk: imx: replace osc_hdmi with dummy
Dario Binacchi <dario.binacchi@amarulasolutions.com>
clk: imx8mn: rename vpu_pll to m7_alt_pll
Gautam Menghani <gautammenghani201@gmail.com>
media: imon: fix a race condition in send_packet()
Chen Zhongjin <chenzhongjin@huawei.com>
media: vimc: Fix wrong function called when vimc_init() fails
Yuan Can <yuancan@huawei.com>
ASoC: qcom: Add checks for devm_kcalloc
Wang ShaoBo <bobo.shaobowang@huawei.com>
drbd: destroy workqueue when drbd device was freed
Wang ShaoBo <bobo.shaobowang@huawei.com>
drbd: remove call to memset before free device/resource/connection
Zheng Yongjun <zhengyongjun3@huawei.com>
mtd: maps: pxa2xx-flash: fix memory leak in probe
Jonathan Toppins <jtoppins@redhat.com>
bonding: fix link recovery in mode 2 when updelay is nonzero
Yang Yingliang <yangyingliang@huawei.com>
drm/amdgpu: fix pci device refcount leak
Xiu Jianfeng <xiujianfeng@huawei.com>
clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
Wang ShaoBo <bobo.shaobowang@huawei.com>
regulator: core: use kfree_const() to free space conditionally
Baisong Zhong <zhongbaisong@huawei.com>
ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT
Baisong Zhong <zhongbaisong@huawei.com>
ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT
ZhangPeng <zhangpeng362@huawei.com>
pinctrl: k210: call of_node_put()
Marcus Folkesson <marcus.folkesson@gmail.com>
HID: hid-sensor-custom: set fixed size for custom attributes
Stanislav Fomichev <sdf@google.com>
bpf: Move skb->len == 0 checks into __bpf_redirect
Allen-KH Cheng <allen-kh.cheng@mediatek.com>
mtd: spi-nor: Fix the number of bytes for the dummy cycles
Michael Walle <michael@walle.cc>
mtd: spi-nor: hide jedec_id sysfs attribute if not present
Eric Dumazet <edumazet@google.com>
inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict()
Christoph Hellwig <hch@lst.de>
media: videobuf-dma-contig: use dma_mmap_coherent
Yuan Can <yuancan@huawei.com>
media: platform: exynos4-is: Fix error handling in fimc_md_init()
Yang Yingliang <yangyingliang@huawei.com>
media: solo6x10: fix possible memory leak in solo_sysfs_init()
Chen Zhongjin <chenzhongjin@huawei.com>
media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init()
Douglas Anderson <dianders@chromium.org>
Input: elants_i2c - properly handle the reset GPIO when power is off
Hui Tang <tanghui20@huawei.com>
mtd: lpddr2_nvm: Fix possible null-ptr-deref
Rob Clark <robdclark@chromium.org>
drm/msm/a6xx: Fix speed-bin detection vs probe-defer
Xiu Jianfeng <xiujianfeng@huawei.com>
wifi: ath10k: Fix return value in ath10k_pci_init()
Christoph Hellwig <hch@lst.de>
block: clear ->slave_dir when dropping the main slave_dir reference
Xiu Jianfeng <xiujianfeng@huawei.com>
ima: Fix misuse of dereference of pointer in template_desc_init_fields()
GUO Zihua <guozihua@huawei.com>
integrity: Fix memory leakage in keyring allocation error path
Brian Starkey <brian.starkey@arm.com>
drm/fourcc: Fix vsub/hsub for Q410 and Q401
Dave Stevenson <dave.stevenson@raspberrypi.com>
drm/fourcc: Add packed 10bit YUV 4:2:0 format
Konrad Dybcio <konrad.dybcio@linaro.org>
regulator: qcom-rpmh: Fix PMR735a S3 regulator spec
Joel Granados <j.granados@samsung.com>
nvme: return err on nvme_init_non_mdts_limits fail
Dan Carpenter <error27@gmail.com>
amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table()
Yang Yingliang <yangyingliang@huawei.com>
regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()
Christoph Hellwig <hch@lst.de>
nvmet: only allocate a single slab for bvecs
David Michael <fedora.dm0@gmail.com>
libbpf: Fix uninitialized warning in btf_dump_dump_type_data
Zeng Heng <zengheng4@huawei.com>
ASoC: pxa: fix null-pointer dereference in filter()
Xinlei Lee <xinlei.lee@mediatek.com>
drm/mediatek: Modify dpi power on/off sequence.
Hanjun Guo <guohanjun@huawei.com>
drm/radeon: Add the missed acpi_put_table() to fix memory leak
Khazhismel Kumykov <khazhy@chromium.org>
bfq: fix waker_bfqq inconsistency crash
David Howells <dhowells@redhat.com>
rxrpc: Fix ack.bufferSize to be 0 when generating an ack
David Howells <dhowells@redhat.com>
net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write()
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
media: camss: Clean up received buffers on failed start of streaming
Marek Vasut <marex@denx.de>
wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port
Randy Dunlap <rdunlap@infradead.org>
Input: joystick - fix Kconfig warning for JOYSTICK_ADC
Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
mtd: Fix device name leak when register device failed in add_mtd_device()
Manivannan Sadhasivam <mani@kernel.org>
clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs
Andrii Nakryiko <andrii@kernel.org>
bpf: propagate precision across all frames, not just the last one
Martin KaFai Lau <kafai@fb.com>
bpf: Check the other end of slot_type for STACK_SPILL
Andrii Nakryiko <andrii@kernel.org>
bpf: propagate precision in ALU/ALU64 operations
Yang Yingliang <yangyingliang@huawei.com>
media: platform: exynos4-is: fix return value check in fimc_md_probe()
Liu Shixin <liushixin2@huawei.com>
media: vivid: fix compose size exceed boundary
Kumar Kartikeya Dwivedi <memxor@gmail.com>
bpf: Fix slot type check in check_stack_write_var_off
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/msm/hdmi: use devres helper for runtime PM management
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/msm/hdmi: drop unused GPIO support
GUO Zihua <guozihua@huawei.com>
ima: Handle -ESTALE returned by ima_filter_rule_match()
Marek Vasut <marex@denx.de>
drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure
Jonathan Neuschäfer <j.neuschaefer@gmx.net>
spi: Update reference to struct spi_controller
Marek Vasut <marex@denx.de>
clk: renesas: r9a06g032: Repair grave increment error
Zhang Qilong <zhangqilong3@huawei.com>
drm/rockchip: lvds: fix PM usage counter unbalance in poweron
Jimmy Assarsson <extja@kvaser.com>
can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
Jimmy Assarsson <extja@kvaser.com>
can: kvaser_usb: Add struct kvaser_usb_busparams
Anssi Hannula <anssi.hannula@bitwise.fi>
can: kvaser_usb_leaf: Fix bogus restart events
Anssi Hannula <anssi.hannula@bitwise.fi>
can: kvaser_usb_leaf: Fix wrong CAN state after stopping
Anssi Hannula <anssi.hannula@bitwise.fi>
can: kvaser_usb_leaf: Fix improved state not being reported
Jimmy Assarsson <extja@kvaser.com>
can: kvaser_usb: make use of units.h in assignment of frequency
Anssi Hannula <anssi.hannula@bitwise.fi>
can: kvaser_usb_leaf: Set Warning state even without bus errors
Jimmy Assarsson <extja@kvaser.com>
can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
Jimmy Assarsson <extja@kvaser.com>
can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event
Jimmy Assarsson <extja@kvaser.com>
can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
Vincent Mailhol <mailhol.vincent@wanadoo.fr>
can: kvaser_usb: do not increase tx statistics when sending error message frames
Alan Maguire <alan.maguire@oracle.com>
libbpf: Btf dedup identical struct test needs check for nested structs/arrays
Marek Szyprowski <m.szyprowski@samsung.com>
media: exynos4-is: don't rely on the v4l2_async_subdev internals
Kuniyuki Iwashima <kuniyu@amazon.com>
soreuseport: Fix socket selection for SO_INCOMING_CPU.
Tang Bin <tangbin@cmss.chinamobile.com>
venus: pm_helpers: Fix error check in vcodec_domains_get()
Ricardo Ribalda <ribalda@chromium.org>
media: i2c: ad5820: Fix error path
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
media: adv748x: afe: Select input port when initializing AFE
Jiasheng Jiang <jiasheng@iscas.ac.cn>
media: coda: jpeg: Add check for kmalloc
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
media: v4l2-ctrls: Fix off-by-one error in integer menu control check
Sean Anderson <sean.anderson@seco.com>
powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G
Rafael Mendonca <rafaelmendsr@gmail.com>
drm/amdgpu/powerplay/psm: Fix memory leak in power state init
Andrew Jeffery <andrew@aj.id.au>
ipmi: kcs: Poll OBF briefly to reduce OBE latency
Niklas Cassel <niklas.cassel@wdc.com>
ata: libata: fix NCQ autosense logic
Sergey Shtylyov <s.shtylyov@omp.ru>
ata: add/use ata_taskfile::{error|status} fields
Hannes Reinecke <hare@suse.de>
ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros
Shung-Hsi Yu <shung-hsi.yu@suse.com>
libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
Xu Kuohai <xukuohai@huawei.com>
libbpf: Fix use-after-free in btf_dump_name_dups
Abhinav Kumar <quic_abhinavk@quicinc.com>
drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge
Bitterblue Smith <rtl8821cerfe2@gmail.com>
wifi: rtl8xxxu: Fix reading the vendor of combo chips
Fedor Pchelkin <pchelkin@ispras.ru>
wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()
Fedor Pchelkin <pchelkin@ispras.ru>
wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()
James Hurley <jahurley@nvidia.com>
platform/mellanox: mlxbf-pmc: Fix event typo
Cai Xinchen <caixinchen1@huawei.com>
rapidio: devices: fix missing put_device in mport_cdev_open
ZhangPeng <zhangpeng362@huawei.com>
hfs: Fix OOB Write in hfs_asc2mac
Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
relay: fix type mismatch when allocating memory in relay_create_buf()
Zhang Qilong <zhangqilong3@huawei.com>
eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
Wang Weiyang <wangweiyang2@huawei.com>
rapidio: fix possible UAF when kfifo_alloc() fails
Chen Zhongjin <chenzhongjin@huawei.com>
fs: sysv: Fix sysv_nblocks() returns wrong value
Trond Myklebust <trond.myklebust@hammerspace.com>
lockd: set other missing fields when unlocking files
Ladislav Michl <ladis@linux-mips.org>
MIPS: OCTEON: warn only once if deprecated link status is being used
Anastasia Belova <abelova@astralinux.ru>
MIPS: BCM63xx: Add check for NULL for clk in clk_enable
Yang Yingliang <yangyingliang@huawei.com>
platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
Yu Liao <liaoyu15@huawei.com>
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
Victor Ding <victording@chromium.org>
platform/chrome: cros_ec_typec: zero out stale pointers
Prashant Malani <pmalani@chromium.org>
platform/chrome: cros_ec_typec: Cleanup switch handle return paths
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PM: runtime: Do not call __rpm_callback() from rpm_idle()
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()
Xiu Jianfeng <xiujianfeng@huawei.com>
x86/xen: Fix memory leak in xen_init_lock_cpu()
Xiu Jianfeng <xiujianfeng@huawei.com>
x86/xen: Fix memory leak in xen_smp_intr_init{_pv}()
Oleg Nesterov <oleg@redhat.com>
uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix
Li Zetao <lizetao1@huawei.com>
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
Yang Yingliang <yangyingliang@huawei.com>
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
Vincent Donnefort <vdonnefort@google.com>
cpu/hotplug: Do not bail-out in DYING/STARTING sections
Phil Auld <pauld@redhat.com>
cpu/hotplug: Make target_store() a nop when target == state
Alexey Izbyshev <izbyshev@ispras.ru>
futex: Resend potentially swallowed owner death notification
Peter Zijlstra <peterz@infradead.org>
futex: Move to kernel/futex/
John Thomson <git@johnthomson.fastmail.com.au>
mips: ralink: mt7621: do not use kzalloc too early
John Thomson <git@johnthomson.fastmail.com.au>
mips: ralink: mt7621: soc queries and tests as functions
John Thomson <git@johnthomson.fastmail.com.au>
mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem
Wolfram Sang <wsa+renesas@sang-engineering.com>
clocksource/drivers/sh_cmt: Access registers according to spec
Yang Yingliang <yangyingliang@huawei.com>
rapidio: rio: fix possible name leak in rio_register_mport()
Yang Yingliang <yangyingliang@huawei.com>
rapidio: fix possible name leaks when rio_add_device() fails
Akinobu Mita <akinobu.mita@gmail.com>
debugfs: fix error when writing negative value to atomic_t debugfs file
Akinobu Mita <akinobu.mita@gmail.com>
lib/notifier-error-inject: fix error when writing -errno to debugfs file
Akinobu Mita <akinobu.mita@gmail.com>
libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value
Xiongfeng Wang <wangxiongfeng2@huawei.com>
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
Yang Yingliang <yangyingliang@huawei.com>
genirq/irqdesc: Don't try to remove non-existing sysfs files
Jeff Layton <jlayton@kernel.org>
nfsd: don't call nfsd_file_put from client states seqfile display
Chuck Lever <chuck.lever@oracle.com>
NFSD: Finish converting the NFSv2 GETACL result encoder
Haowen Bai <baihaowen@meizu.com>
SUNRPC: Return true/false (not 1/0) from bool functions
Yang Yingliang <yangyingliang@huawei.com>
EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
Wei Yongjun <weiyongjun1@huawei.com>
irqchip/wpcm450: Fix memory leak in wpcm450_aic_of_init()
Shang XiaoJing <shangxiaojing@huawei.com>
irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()
Yang Yingliang <yangyingliang@huawei.com>
thermal: core: fix some possible name leaks in error paths
Yuan Can <yuancan@huawei.com>
platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init()
Xiongfeng Wang <wangxiongfeng2@huawei.com>
perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box()
Xiongfeng Wang <wangxiongfeng2@huawei.com>
perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map()
Xiongfeng Wang <wangxiongfeng2@huawei.com>
perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()
Xiongfeng Wang <wangxiongfeng2@huawei.com>
perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology()
Yang Yingliang <yangyingliang@huawei.com>
PNP: fix name memory leak in pnp_alloc_dev()
Zhao Gongyi <zhaogongyi@huawei.com>
selftests/efivarfs: Add checking of the test return value
Yang Yingliang <yangyingliang@huawei.com>
MIPS: vpe-cmp: fix possible memory leak while module exiting
Yang Yingliang <yangyingliang@huawei.com>
MIPS: vpe-mt: fix possible memory leak while module exiting
Shang XiaoJing <shangxiaojing@huawei.com>
ocfs2: fix memory leak in ocfs2_stack_glue_init()
Gaosheng Cui <cuigaosheng1@huawei.com>
lib/fonts: fix undefined behavior in bit shift for get_default_font
Alexey Dobriyan <adobriyan@gmail.com>
proc: fixup uptime selftest
Barnabás Pőcze <pobrn@protonmail.com>
timerqueue: Use rb_entry_safe() in timerqueue_getnext()
Barnabás Pőcze <pobrn@protonmail.com>
platform/x86: huawei-wmi: fix return value calculation
wuchi <wuchi.zero@gmail.com>
lib/debugobjects: fix stat count and optimize debug_objects_mem_init
Chen Zhongjin <chenzhongjin@huawei.com>
perf: Fix possible memleak in pmu_dev_alloc()
Yipeng Zou <zouyipeng@huawei.com>
selftests/ftrace: event_triggers: wait longer for test_event_enable
Chen Hui <judy.chenhui@huawei.com>
cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
Ondrej Mosnacek <omosnace@redhat.com>
fs: don't audit the capability check in simple_xattr_list()
xiongxin <xiongxin@kylinos.cn>
PM: hibernate: Fix mistake in kerneldoc comment
Reinette Chatre <reinette.chatre@intel.com>
x86/sgx: Reduce delay and interference of enclave release
Al Viro <viro@zeniv.linux.org.uk>
alpha: fix syscall entry in !AUDUT_SYSCALL case
Al Viro <viro@zeniv.linux.org.uk>
alpha: fix TIF_NOTIFY_SIGNAL handling
Ulf Hansson <ulf.hansson@linaro.org>
cpuidle: dt: Return the correct numbers of parsed idle states
Qais Yousef <qais.yousef@arm.com>
sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()
Dietmar Eggemann <dietmar.eggemann@arm.com>
sched/core: Introduce sched_asym_cpucap_active()
Vincent Guittot <vincent.guittot@linaro.org>
sched/fair: Removed useless update of p->recent_used_cpu
Qais Yousef <qais.yousef@arm.com>
sched/uclamp: Make select_idle_capacity() use util_fits_cpu()
Qais Yousef <qais.yousef@arm.com>
sched/uclamp: Make task_fits_capacity() use util_fits_cpu()
Qais Yousef <qais.yousef@arm.com>
sched/uclamp: Fix relationship between uclamp and migration margin
Vincent Donnefort <vincent.donnefort@arm.com>
sched/fair: Cleanup task_util and capacity type
Amir Goldstein <amir73il@gmail.com>
ovl: remove privs in ovl_fallocate()
Amir Goldstein <amir73il@gmail.com>
ovl: remove privs in ovl_copyfile()
Christian Brauner <brauner@kernel.org>
ovl: use ovl_copy_{real,upper}attr() wrappers
Amir Goldstein <amir73il@gmail.com>
ovl: store lower path in ovl_inode
Michael Kelley <mikelley@microsoft.com>
tpm/tpm_crb: Fix error message in __crb_relinquish_locality()
Yuan Can <yuancan@huawei.com>
tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init()
Stephen Boyd <swboyd@chromium.org>
pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
Doug Brown <doug@schmorgal.com>
ARM: mmp: fix timer_read delay
Wang Yufen <wangyufen@huawei.com>
pstore/ram: Fix error return code in ramoops_probe()
Kuniyuki Iwashima <kuniyu@amazon.com>
seccomp: Move copy_seccomp() to no failure path.
Pali Rohár <pali@kernel.org>
arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC
Pali Rohár <pali@kernel.org>
ARM: dts: armada-39x: Fix compatible string for gpios
Pali Rohár <pali@kernel.org>
ARM: dts: armada-38x: Fix compatible string for gpios
Pali Rohár <pali@kernel.org>
ARM: dts: turris-omnia: Add switch port 6 node
Pali Rohár <pali@kernel.org>
ARM: dts: turris-omnia: Add ethernet aliases
Pali Rohár <pali@kernel.org>
ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port
Pali Rohár <pali@kernel.org>
ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port
Pali Rohár <pali@kernel.org>
ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port
Pali Rohár <pali@kernel.org>
ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port
Pali Rohár <pali@kernel.org>
ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port
Pali Rohár <pali@kernel.org>
ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mt2712-evb: Fix usb vbus regulators unit names
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mt2712e: Fix unit address for pinctrl node
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mt6779: Fix devicetree build warnings
Jonathan Neuschäfer <j.neuschaefer@gmx.net>
ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes
Jayesh Choudhary <j-choudhary@ti.com>
arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node
Jayesh Choudhary <j-choudhary@ti.com>
arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node
Shang XiaoJing <shangxiaojing@huawei.com>
perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init()
Shang XiaoJing <shangxiaojing@huawei.com>
perf/arm_dmc620: Fix hotplug callback leak in dmc620_pmu_init()
Yuan Can <yuancan@huawei.com>
perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init()
Mark Rutland <mark.rutland@arm.com>
arm64: mm: kfence: only handle translation faults
Alexandru Elisei <alexandru.elisei@arm.com>
arm64: Treat ESR_ELx as a 64-bit register
Zhang Qilong <zhangqilong3@huawei.com>
soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe
Zhang Qilong <zhangqilong3@huawei.com>
soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe
Minghao Chi <chi.minghao@zte.com.cn>
soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
Kory Maincent <kory.maincent@bootlin.com>
arm: dts: spear600: Fix clcd interrupt
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: sm6125: fix SDHCI CQE reg names
Jiasheng Jiang <jiasheng@iscas.ac.cn>
soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
soc: qcom: apr: make code more reuseable
Johan Hovold <johan+linaro@kernel.org>
arm64: dts: qcom: sm8250: drop bogus DP PHY clock
Johan Hovold <johan+linaro@kernel.org>
arm64: dts: qcom: sm8350: fix UFS PHY registers
Johan Hovold <johan+linaro@kernel.org>
arm64: dts: qcom: sm8250: fix UFS PHY registers
Johan Hovold <johan+linaro@kernel.org>
arm64: dts: qcom: sm8150: fix UFS PHY registers
Shawn Guo <shawn.guo@linaro.org>
arm64: dts: qcom: Correct QMP PHY child node name
Luca Weiss <luca.weiss@fairphone.com>
soc: qcom: llcc: make irq truly optional
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: sm8250: correct LPASS pin pull down
Marijn Suijten <marijn.suijten@somainline.org>
arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name
Chen Jiahao <chenjiahao16@huawei.com>
drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static
Marek Vasut <marex@denx.de>
ARM: dts: stm32: Fix AV96 WLAN regulator gpio property
Marek Vasut <marex@denx.de>
ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96
Marco Elver <elver@google.com>
objtool, kcsan: Add volatile read/write instrumentation to whitelist
Stephan Gerhold <stephan.gerhold@kernkonzept.com>
arm64: dts: qcom: msm8916: Drop MSS fallback compatible
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: sdm845-cheza: fix AP suspend pin bias
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: sdm630: fix UART1 pin bias
Luca Weiss <luca@z3ntu.xyz>
ARM: dts: qcom: apq8064: fix coresight compatible
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
arm64: dts: qcom: msm8996: fix GPU OPP table
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
arm64: dts: qcom: msm8996: fix supported-hw in cpufreq OPP tables
Yassine Oudjana <y.oudjana@protonmail.com>
arm64: dts: qcom: msm8996: Add MSM8996 Pro support
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
usb: musb: remove extra check in musb_gadget_vbus_draw
Martin Leung <Martin.Leung@amd.com>
drm/amd/display: Manually adjust strobe for DCN303
-------------
Diffstat:
.../ABI/testing/sysfs-bus-spi-devices-spi-nor | 3 +
.../devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 46 +-
.../bindings/pci/toshiba,visconti-pcie.yaml | 7 +-
.../devicetree/bindings/sound/qcom,wcd9335.txt | 2 +-
Documentation/driver-api/spi.rst | 4 +-
Documentation/fault-injection/fault-injection.rst | 10 +-
Documentation/process/deprecated.rst | 20 +-
MAINTAINERS | 2 +-
Makefile | 4 +-
arch/alpha/include/asm/thread_info.h | 2 +-
arch/alpha/kernel/entry.S | 4 +-
arch/arm/boot/dts/armada-370.dtsi | 2 +-
arch/arm/boot/dts/armada-375.dtsi | 2 +-
arch/arm/boot/dts/armada-380.dtsi | 4 +-
arch/arm/boot/dts/armada-385-turris-omnia.dts | 18 +-
arch/arm/boot/dts/armada-385.dtsi | 6 +-
arch/arm/boot/dts/armada-38x.dtsi | 4 +-
arch/arm/boot/dts/armada-39x.dtsi | 10 +-
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 8 +-
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 16 +-
arch/arm/boot/dts/dove.dtsi | 2 +-
arch/arm/boot/dts/nuvoton-npcm730-gbs.dts | 2 +-
arch/arm/boot/dts/nuvoton-npcm730-gsj.dts | 2 +-
arch/arm/boot/dts/nuvoton-npcm730-kudo.dts | 6 +-
arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 4 +-
.../boot/dts/nuvoton-npcm750-runbmc-olympus.dts | 6 +-
arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +-
arch/arm/boot/dts/spear600.dtsi | 2 +-
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts | 1 -
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 2 +-
arch/arm/mach-mmp/time.c | 11 +-
.../boot/dts/marvell/armada-3720-turris-mox.dts | 3 +
arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 12 +-
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 22 +-
arch/arm64/boot/dts/mediatek/mt6779.dtsi | 8 +-
arch/arm64/boot/dts/mediatek/mt6797.dtsi | 2 +-
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 2 +-
arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 6 +-
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 2 +
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 +-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 122 +-
arch/arm64/boot/dts/qcom/msm8996pro.dtsi | 266 +
arch/arm64/boot/dts/qcom/msm8998.dtsi | 6 +-
arch/arm64/boot/dts/qcom/pm660.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 4 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 +-
arch/arm64/boot/dts/qcom/sm6125.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8150.dtsi | 16 +-
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 30 +-
arch/arm64/boot/dts/qcom/sm8350.dtsi | 12 +-
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 1 -
arch/arm64/include/asm/debug-monitors.h | 4 +-
arch/arm64/include/asm/esr.h | 6 +-
arch/arm64/include/asm/exception.h | 28 +-
arch/arm64/include/asm/processor.h | 4 +-
arch/arm64/include/asm/system_misc.h | 4 +-
arch/arm64/include/asm/traps.h | 12 +-
arch/arm64/kernel/debug-monitors.c | 12 +-
arch/arm64/kernel/entry-common.c | 6 +-
arch/arm64/kernel/fpsimd.c | 6 +-
arch/arm64/kernel/hw_breakpoint.c | 4 +-
arch/arm64/kernel/kgdb.c | 6 +-
arch/arm64/kernel/probes/kprobes.c | 4 +-
arch/arm64/kernel/probes/uprobes.c | 4 +-
arch/arm64/kernel/traps.c | 66 +-
arch/arm64/mm/fault.c | 78 +-
arch/mips/bcm63xx/clk.c | 2 +
.../cavium-octeon/executive/cvmx-helper-board.c | 2 +-
arch/mips/cavium-octeon/executive/cvmx-helper.c | 2 +-
arch/mips/include/asm/mach-ralink/mt7621.h | 4 +-
arch/mips/kernel/vpe-cmp.c | 4 +-
arch/mips/kernel/vpe-mt.c | 4 +-
arch/mips/ralink/mt7621.c | 97 +-
arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi | 44 +
arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi | 44 +
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 4 +-
arch/powerpc/perf/callchain.c | 1 +
arch/powerpc/perf/hv-gpci-requests.h | 4 +
arch/powerpc/perf/hv-gpci.c | 33 +-
arch/powerpc/perf/hv-gpci.h | 1 +
arch/powerpc/perf/req-gen/perf.h | 20 +
arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c | 1 +
arch/powerpc/platforms/83xx/mpc832x_rdb.c | 2 +-
arch/powerpc/platforms/pseries/eeh_pseries.c | 14 +-
arch/powerpc/sysdev/xive/spapr.c | 1 +
arch/powerpc/xmon/xmon.c | 7 +-
arch/riscv/include/asm/hugetlb.h | 6 +
arch/riscv/kernel/traps.c | 2 +-
arch/riscv/net/bpf_jit_comp64.c | 29 +-
arch/x86/events/intel/uncore_snb.c | 3 +
arch/x86/events/intel/uncore_snbep.c | 5 +
arch/x86/hyperv/hv_init.c | 2 -
arch/x86/kernel/cpu/sgx/encl.c | 23 +-
arch/x86/kernel/uprobes.c | 4 +-
arch/x86/xen/smp.c | 24 +-
arch/x86/xen/smp_pv.c | 12 +-
arch/x86/xen/spinlock.c | 6 +-
block/bfq-iosched.c | 16 +-
block/blk-iocost.c | 14 +-
block/blk-mq-sysfs.c | 11 +-
block/genhd.c | 2 +
crypto/cryptd.c | 36 +-
crypto/tcrypt.c | 9 -
drivers/acpi/acpica/dsmethod.c | 10 +-
drivers/acpi/acpica/utcopy.c | 7 -
drivers/ata/acard-ahci.c | 2 +-
drivers/ata/ahci.c | 4 +-
drivers/ata/ahci_qoriq.c | 2 +-
drivers/ata/ahci_xgene.c | 2 +-
drivers/ata/libahci.c | 4 +-
drivers/ata/libata-acpi.c | 52 +-
drivers/ata/libata-core.c | 73 +-
drivers/ata/libata-eh.c | 42 +-
drivers/ata/libata-sata.c | 19 +-
drivers/ata/libata-scsi.c | 22 +-
drivers/ata/libata-sff.c | 6 +-
drivers/ata/pata_ep93xx.c | 4 +-
drivers/ata/pata_ixp4xx_cf.c | 6 +-
drivers/ata/pata_ns87415.c | 4 +-
drivers/ata/pata_octeon_cf.c | 4 +-
drivers/ata/pata_samsung_cf.c | 2 +-
drivers/ata/sata_highbank.c | 2 +-
drivers/ata/sata_inic162x.c | 10 +-
drivers/ata/sata_rcar.c | 4 +-
drivers/ata/sata_svw.c | 10 +-
drivers/ata/sata_vsc.c | 10 +-
drivers/base/class.c | 5 +
drivers/base/power/runtime.c | 12 +-
drivers/block/drbd/drbd_main.c | 9 +-
drivers/block/floppy.c | 4 +-
drivers/block/loop.c | 28 +-
drivers/bluetooth/btintel.c | 5 +-
drivers/bluetooth/btusb.c | 6 +-
drivers/bluetooth/hci_bcsp.c | 2 +-
drivers/bluetooth/hci_h5.c | 2 +-
drivers/bluetooth/hci_ll.c | 2 +-
drivers/bluetooth/hci_qca.c | 2 +-
drivers/char/hw_random/amd-rng.c | 18 +-
drivers/char/hw_random/geode-rng.c | 36 +-
drivers/char/ipmi/ipmi_msghandler.c | 8 +-
drivers/char/ipmi/kcs_bmc_aspeed.c | 24 +-
drivers/char/tpm/tpm_crb.c | 2 +-
drivers/char/tpm/tpm_ftpm_tee.c | 8 +-
drivers/clk/imx/clk-imx8mn.c | 34 +-
drivers/clk/qcom/clk-krait.c | 2 +
drivers/clk/qcom/gcc-sm8250.c | 4 +-
drivers/clk/qcom/lpasscorecc-sc7180.c | 24 +-
drivers/clk/renesas/r9a06g032-clocks.c | 3 +-
drivers/clk/rockchip/clk-pll.c | 1 +
drivers/clk/samsung/clk-pll.c | 1 +
drivers/clk/socfpga/clk-gate.c | 5 +-
drivers/clk/st/clkgen-fsyn.c | 5 +-
drivers/clocksource/sh_cmt.c | 88 +-
drivers/clocksource/timer-ti-dm-systimer.c | 4 +-
drivers/counter/stm32-lptimer-cnt.c | 2 +-
drivers/cpufreq/amd_freq_sensitivity.c | 2 +
drivers/cpufreq/qcom-cpufreq-hw.c | 1 +
drivers/cpuidle/dt_idle_states.c | 2 +-
drivers/crypto/Kconfig | 5 +
.../crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c | 2 +-
drivers/crypto/amlogic/amlogic-gxl-core.c | 1 -
drivers/crypto/amlogic/amlogic-gxl.h | 2 +-
drivers/crypto/cavium/nitrox/nitrox_mbx.c | 1 +
drivers/crypto/ccree/cc_debugfs.c | 2 +-
drivers/crypto/ccree/cc_driver.c | 10 +-
drivers/crypto/hisilicon/hpre/hpre_main.c | 10 +-
drivers/crypto/hisilicon/qm.c | 7 +-
drivers/crypto/hisilicon/qm.h | 6 +-
drivers/crypto/img-hash.c | 8 +-
drivers/crypto/omap-sham.c | 2 +-
drivers/crypto/rockchip/rk3288_crypto.c | 193 +-
drivers/crypto/rockchip/rk3288_crypto.h | 53 +-
drivers/crypto/rockchip/rk3288_crypto_ahash.c | 197 +-
drivers/crypto/rockchip/rk3288_crypto_skcipher.c | 413 +-
drivers/dio/dio.c | 8 +
drivers/edac/i10nm_base.c | 3 +-
drivers/extcon/Kconfig | 2 +-
drivers/extcon/extcon-usbc-tusb320.c | 402 +-
drivers/firmware/raspberrypi.c | 1 +
drivers/gpio/gpiolib-cdev.c | 268 +-
drivers/gpio/gpiolib.c | 16 +-
drivers/gpio/gpiolib.h | 39 +
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c | 1 +
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 +
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h | 5 +-
.../drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 35 -
drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 16 +-
.../gpu/drm/amd/display/dc/dce60/dce60_resource.c | 3 +
.../gpu/drm/amd/display/dc/dce80/dce80_resource.c | 2 +
.../drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 30 +-
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 29 +-
.../drm/amd/display/dc/dcn303/dcn303_resource.c | 14 +
drivers/gpu/drm/amd/include/kgd_pp_interface.h | 3 +-
drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c | 3 +-
drivers/gpu/drm/amd/pm/powerplay/hwmgr/pp_psm.c | 2 +
.../gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c | 3 +-
drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c | 4 +
drivers/gpu/drm/bridge/adv7511/adv7511.h | 3 +-
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 18 +-
drivers/gpu/drm/bridge/adv7511/adv7533.c | 25 +-
drivers/gpu/drm/drm_fourcc.c | 11 +-
drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 11 +-
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 5 +-
drivers/gpu/drm/i915/display/intel_dp.c | 59 -
drivers/gpu/drm/mediatek/mtk_dpi.c | 12 +-
drivers/gpu/drm/mediatek/mtk_hdmi.c | 7 +-
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 +-
drivers/gpu/drm/msm/dp/dp_display.c | 2 +-
drivers/gpu/drm/msm/hdmi/hdmi.c | 68 +-
drivers/gpu/drm/msm/hdmi/hdmi.h | 13 +-
drivers/gpu/drm/msm/hdmi/hdmi_hpd.c | 62 +-
drivers/gpu/drm/panel/panel-sitronix-st7701.c | 10 +-
drivers/gpu/drm/radeon/radeon_bios.c | 19 +-
drivers/gpu/drm/rockchip/cdn-dp-core.c | 2 +-
drivers/gpu/drm/rockchip/inno_hdmi.c | 2 +-
drivers/gpu/drm/rockchip/rk3066_hdmi.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_lvds.c | 10 +-
drivers/gpu/drm/sti/sti_dvo.c | 7 +-
drivers/gpu/drm/sti/sti_hda.c | 7 +-
drivers/gpu/drm/sti/sti_hdmi.c | 7 +-
drivers/gpu/drm/tegra/dc.c | 4 +-
drivers/hid/amd-sfh-hid/amd_sfh_client.c | 4 +
drivers/hid/hid-mcp2221.c | 12 +-
drivers/hid/hid-sensor-custom.c | 2 +-
drivers/hid/wacom_sys.c | 8 +
drivers/hid/wacom_wac.c | 4 +
drivers/hid/wacom_wac.h | 1 +
drivers/hsi/controllers/omap_ssi_core.c | 14 +-
drivers/hv/ring_buffer.c | 13 +
drivers/hwmon/Kconfig | 1 +
drivers/hwmon/jc42.c | 243 +-
drivers/hwtracing/coresight/coresight-trbe.c | 1 +
drivers/i2c/busses/i2c-ismt.c | 3 +
drivers/i2c/busses/i2c-pxa-pci.c | 10 +-
drivers/i2c/muxes/i2c-mux-reg.c | 5 +-
drivers/iio/accel/adis16201.c | 1 +
drivers/iio/accel/adis16209.c | 1 +
drivers/iio/adc/ad_sigma_delta.c | 8 +-
drivers/iio/adc/ti-adc128s052.c | 14 +-
drivers/iio/gyro/adis16136.c | 1 +
drivers/iio/gyro/adis16260.c | 1 +
drivers/iio/imu/adis.c | 98 +-
drivers/iio/imu/adis16400.c | 1 +
drivers/iio/imu/adis16460.c | 1 +
drivers/iio/imu/adis16475.c | 1 +
drivers/iio/imu/adis16480.c | 1 +
drivers/iio/imu/adis_buffer.c | 10 +-
drivers/iio/imu/adis_trigger.c | 9 +-
drivers/iio/industrialio-event.c | 4 +-
drivers/iio/temperature/ltc2983.c | 10 +-
drivers/infiniband/core/device.c | 2 +-
drivers/infiniband/core/mad.c | 5 -
drivers/infiniband/core/nldev.c | 6 +-
drivers/infiniband/core/restrack.c | 2 -
drivers/infiniband/core/sysfs.c | 17 +-
drivers/infiniband/hw/hfi1/affinity.c | 2 +
drivers/infiniband/hw/hfi1/firmware.c | 6 +
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 52 +-
drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 5 +
drivers/infiniband/hw/hns/hns_roce_mr.c | 4 +-
drivers/infiniband/hw/irdma/verbs.c | 35 +-
drivers/infiniband/sw/rxe/rxe_qp.c | 6 +-
drivers/infiniband/sw/siw/siw_cq.c | 24 +-
drivers/infiniband/sw/siw/siw_qp_tx.c | 2 +-
drivers/infiniband/sw/siw/siw_verbs.c | 40 +-
drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 7 +
drivers/infiniband/ulp/srp/ib_srp.c | 96 +-
drivers/input/joystick/Kconfig | 1 +
drivers/input/misc/Kconfig | 2 +-
drivers/input/touchscreen/elants_i2c.c | 9 +-
drivers/iommu/amd/iommu_v2.c | 1 +
drivers/iommu/fsl_pamu.c | 2 +-
drivers/iommu/rockchip-iommu.c | 10 +-
drivers/iommu/sun50i-iommu.c | 16 +-
drivers/irqchip/irq-gic-pm.c | 2 +-
drivers/irqchip/irq-wpcm450-aic.c | 1 +
drivers/isdn/hardware/mISDN/hfcmulti.c | 19 +-
drivers/isdn/hardware/mISDN/hfcpci.c | 13 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 12 +-
drivers/macintosh/macio-adb.c | 4 +
drivers/macintosh/macio_asic.c | 2 +-
drivers/mailbox/arm_mhuv2.c | 4 +-
drivers/mailbox/mailbox-mpfs.c | 31 +-
drivers/mailbox/zynqmp-ipi-mailbox.c | 4 +-
drivers/mcb/mcb-core.c | 4 +-
drivers/mcb/mcb-parse.c | 2 +-
drivers/md/md-bitmap.c | 27 +-
drivers/md/raid1.c | 1 +
drivers/media/dvb-core/dvb_ca_en50221.c | 2 +-
drivers/media/dvb-core/dvb_frontend.c | 10 +-
drivers/media/dvb-core/dvbdev.c | 32 +-
drivers/media/dvb-frontends/bcm3510.c | 1 +
drivers/media/i2c/ad5820.c | 10 +-
drivers/media/i2c/adv748x/adv748x-afe.c | 4 +
drivers/media/pci/saa7164/saa7164-core.c | 4 +-
drivers/media/pci/solo6x10/solo6x10-core.c | 1 +
drivers/media/platform/coda/coda-bit.c | 14 +-
drivers/media/platform/coda/coda-jpeg.c | 10 +-
drivers/media/platform/exynos4-is/fimc-core.c | 2 +-
drivers/media/platform/exynos4-is/media-dev.c | 12 +-
drivers/media/platform/imx-jpeg/mxc-jpeg-hw.c | 4 +-
drivers/media/platform/qcom/camss/camss-video.c | 3 +-
drivers/media/platform/qcom/venus/pm_helpers.c | 4 +-
drivers/media/platform/s5p-mfc/s5p_mfc.c | 17 +-
.../media/platform/sti/c8sectpfe/c8sectpfe-core.c | 1 +
drivers/media/radio/si470x/radio-si470x-usb.c | 4 +-
drivers/media/rc/imon.c | 6 +-
drivers/media/test-drivers/vidtv/vidtv_bridge.c | 22 +-
drivers/media/test-drivers/vimc/vimc-core.c | 2 +-
drivers/media/test-drivers/vivid/vivid-vid-cap.c | 1 +
drivers/media/usb/dvb-usb/az6027.c | 4 +
drivers/media/usb/dvb-usb/dvb-usb-init.c | 4 +-
drivers/media/v4l2-core/v4l2-ctrls-core.c | 2 +-
drivers/media/v4l2-core/videobuf-dma-contig.c | 22 +-
drivers/memstick/core/ms_block.c | 13 +-
drivers/mfd/Kconfig | 1 +
drivers/mfd/qcom-pm8008.c | 55 +-
drivers/mfd/qcom_rpm.c | 4 +-
drivers/misc/cxl/guest.c | 24 +-
drivers/misc/cxl/pci.c | 21 +-
drivers/misc/ocxl/config.c | 20 +-
drivers/misc/ocxl/file.c | 7 +-
drivers/misc/sgi-gru/grufault.c | 13 +-
drivers/misc/sgi-gru/grumain.c | 22 +-
drivers/misc/sgi-gru/grutables.h | 2 +-
drivers/misc/tifm_7xx1.c | 2 +-
drivers/mmc/core/sd.c | 11 +-
drivers/mmc/host/alcor.c | 5 +-
drivers/mmc/host/atmel-mci.c | 9 +-
drivers/mmc/host/meson-gx-mmc.c | 4 +-
drivers/mmc/host/mmci.c | 4 +-
drivers/mmc/host/moxart-mmc.c | 4 +-
drivers/mmc/host/mxcmmc.c | 4 +-
drivers/mmc/host/omap_hsmmc.c | 4 +-
drivers/mmc/host/pxamci.c | 7 +-
drivers/mmc/host/renesas_sdhi_core.c | 14 +-
drivers/mmc/host/rtsx_pci_sdmmc.c | 9 +-
drivers/mmc/host/rtsx_usb_sdmmc.c | 11 +-
drivers/mmc/host/sdhci_f_sdh30.c | 3 +
drivers/mmc/host/toshsd.c | 6 +-
drivers/mmc/host/via-sdmmc.c | 4 +-
drivers/mmc/host/vub300.c | 11 +-
drivers/mmc/host/wbsd.c | 12 +-
drivers/mmc/host/wmt-sdmmc.c | 6 +-
drivers/mtd/lpddr/lpddr2_nvm.c | 2 +
drivers/mtd/maps/pxa2xx-flash.c | 2 +
drivers/mtd/mtdcore.c | 4 +-
drivers/mtd/spi-nor/core.c | 3 +-
drivers/mtd/spi-nor/sysfs.c | 14 +
drivers/net/bonding/bond_main.c | 13 +-
drivers/net/can/m_can/m_can.c | 32 +-
drivers/net/can/m_can/m_can_platform.c | 4 -
drivers/net/can/m_can/tcan4x5x-core.c | 18 +-
drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 30 +-
drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 115 +-
drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 174 +-
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 446 +-
drivers/net/dsa/lan9303-core.c | 4 +-
drivers/net/ethernet/amd/atarilance.c | 2 +-
drivers/net/ethernet/amd/lance.c | 2 +-
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 23 +-
drivers/net/ethernet/apple/bmac.c | 2 +-
drivers/net/ethernet/apple/mace.c | 2 +-
drivers/net/ethernet/dnet.c | 4 +-
drivers/net/ethernet/freescale/enetc/enetc.c | 35 +-
drivers/net/ethernet/intel/i40e/i40e_main.c | 36 +-
drivers/net/ethernet/intel/igb/igb_main.c | 8 +-
drivers/net/ethernet/intel/igc/igc.h | 3 +
drivers/net/ethernet/intel/igc/igc_defines.h | 2 +
drivers/net/ethernet/intel/igc/igc_main.c | 233 +-
drivers/net/ethernet/intel/igc/igc_tsn.c | 13 +-
drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 1 +
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_debug.c | 3 +-
.../ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 2 +
drivers/net/ethernet/rdc/r6040.c | 5 +-
.../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 3 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h | 2 +-
.../net/ethernet/stmicro/stmmac/stmmac_selftests.c | 8 +-
drivers/net/ethernet/ti/netcp_core.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 2 +-
drivers/net/fddi/defxx.c | 22 +-
drivers/net/hamradio/baycom_epp.c | 2 +-
drivers/net/hamradio/scc.c | 6 +-
drivers/net/macsec.c | 34 +-
drivers/net/ntb_netdev.c | 4 +-
drivers/net/ppp/ppp_generic.c | 2 +
drivers/net/wan/farsync.c | 2 +
drivers/net/wireless/ath/ar5523/ar5523.c | 6 +
drivers/net/wireless/ath/ath10k/pci.c | 20 +-
drivers/net/wireless/ath/ath9k/hif_usb.c | 46 +-
.../broadcom/brcm80211/brcmfmac/firmware.c | 5 +
.../wireless/broadcom/brcm80211/brcmfmac/pcie.c | 6 +-
.../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 +
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 12 +-
drivers/net/wireless/mediatek/mt76/mt76.h | 3 +-
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 3 +-
drivers/net/wireless/mediatek/mt76/mt7915/main.c | 3 +-
drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 2 +-
drivers/net/wireless/mediatek/mt76/usb.c | 11 +-
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 2 +-
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 26 +-
drivers/net/wireless/rsi/rsi_91x_core.c | 4 +-
drivers/net/wireless/rsi/rsi_91x_hal.c | 6 +-
drivers/nfc/pn533/pn533.c | 4 +
drivers/nvme/host/core.c | 2 +-
drivers/nvme/target/core.c | 22 +-
drivers/nvme/target/io-cmd-file.c | 16 +-
drivers/nvme/target/nvmet.h | 3 +-
drivers/of/overlay.c | 4 +-
drivers/pci/controller/dwc/pcie-designware.c | 2 +-
drivers/pci/controller/vmd.c | 5 +
drivers/pci/endpoint/functions/pci-epf-test.c | 2 +-
drivers/pci/irq.c | 2 +
drivers/perf/arm_dmc620_pmu.c | 8 +-
drivers/perf/arm_dsu_pmu.c | 6 +-
drivers/perf/arm_smmuv3_pmu.c | 8 +-
drivers/phy/broadcom/phy-brcm-usb.c | 6 +-
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 6350 ++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 6350 ++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 6350 ++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 6350 ++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 6350 ++++++++++++++++++++
drivers/pinctrl/pinconf-generic.c | 4 +-
drivers/pinctrl/pinctrl-k210.c | 4 +-
drivers/platform/chrome/cros_ec_typec.c | 8 +-
drivers/platform/chrome/cros_usbpd_notify.c | 6 +-
drivers/platform/mellanox/mlxbf-pmc.c | 2 +-
drivers/platform/x86/huawei-wmi.c | 20 +-
drivers/platform/x86/intel_scu_ipc.c | 2 +-
drivers/platform/x86/mxm-wmi.c | 8 +-
drivers/pnp/core.c | 4 +-
drivers/power/supply/ab8500_charger.c | 9 +-
drivers/power/supply/power_supply_core.c | 7 +-
drivers/power/supply/z2_battery.c | 6 +-
drivers/pwm/pwm-mediatek.c | 2 +-
drivers/pwm/pwm-mtk-disp.c | 5 +-
drivers/pwm/pwm-sifive.c | 5 +-
drivers/pwm/pwm-tegra.c | 4 +-
drivers/rapidio/devices/rio_mport_cdev.c | 15 +-
drivers/rapidio/rio-scan.c | 8 +-
drivers/rapidio/rio.c | 9 +-
drivers/regulator/core.c | 15 +-
drivers/regulator/qcom-labibb-regulator.c | 1 +
drivers/regulator/qcom-rpmh-regulator.c | 2 +-
drivers/remoteproc/qcom_q6v5_pas.c | 4 +
drivers/remoteproc/qcom_q6v5_wcss.c | 6 +-
drivers/remoteproc/qcom_sysmon.c | 5 +-
drivers/rtc/rtc-cmos.c | 366 +-
drivers/rtc/rtc-mxc_v2.c | 4 +-
drivers/rtc/rtc-pcf85063.c | 10 +-
drivers/rtc/rtc-pic32.c | 8 +-
drivers/rtc/rtc-snvs.c | 16 +-
drivers/rtc/rtc-st-lpc.c | 1 +
drivers/s390/net/ctcm_main.c | 11 +-
drivers/s390/net/lcs.c | 8 +-
drivers/s390/net/netiucv.c | 9 +-
drivers/scsi/elx/efct/efct_driver.c | 1 +
drivers/scsi/elx/libefc/efclib.h | 6 +-
drivers/scsi/fcoe/fcoe.c | 1 +
drivers/scsi/fcoe/fcoe_sysfs.c | 19 +-
drivers/scsi/hpsa.c | 9 +-
drivers/scsi/ipr.c | 10 +-
drivers/scsi/lpfc/lpfc_sli.c | 6 +-
drivers/scsi/mpt3sas/mpt3sas_transport.c | 2 +
drivers/scsi/qla2xxx/qla_def.h | 22 +-
drivers/scsi/qla2xxx/qla_init.c | 20 +-
drivers/scsi/qla2xxx/qla_inline.h | 4 +-
drivers/scsi/qla2xxx/qla_os.c | 4 +-
drivers/scsi/scsi_debug.c | 11 +-
drivers/scsi/scsi_error.c | 14 +-
drivers/scsi/snic/snic_disc.c | 3 +
drivers/scsi/ufs/ufshcd.c | 9 +-
drivers/soc/mediatek/mtk-pm-domains.c | 2 +-
drivers/soc/qcom/apr.c | 142 +-
drivers/soc/qcom/llcc-qcom.c | 2 +-
drivers/soc/ti/knav_qmss_queue.c | 6 +-
drivers/soc/ti/smartreflex.c | 1 +
drivers/spi/spi-gpio.c | 16 +-
drivers/spi/spidev.c | 21 +-
drivers/staging/iio/accel/adis16203.c | 1 +
drivers/staging/iio/accel/adis16240.c | 1 +
drivers/staging/mt7621-pci/pci-mt7621.c | 39 +-
drivers/staging/rtl8192e/rtllib_rx.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 4 +-
drivers/thermal/imx8mm_thermal.c | 8 +-
drivers/thermal/qcom/lmh.c | 2 +-
drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 3 +-
drivers/thermal/thermal_core.c | 18 +-
drivers/tty/serial/8250/8250_bcm7271.c | 10 +-
drivers/tty/serial/altera_uart.c | 21 +-
drivers/tty/serial/amba-pl011.c | 14 +-
drivers/tty/serial/pch_uart.c | 4 +
drivers/tty/serial/serial-tegra.c | 6 +-
drivers/tty/serial/stm32-usart.c | 47 +-
drivers/tty/serial/sunsab.c | 8 +-
drivers/uio/uio_dmem_genirq.c | 13 +-
drivers/usb/cdns3/cdnsp-ring.c | 42 +-
drivers/usb/dwc3/core.c | 23 +-
drivers/usb/gadget/function/f_hid.c | 53 +-
drivers/usb/gadget/udc/fotg210-udc.c | 12 +-
drivers/usb/host/xhci-mtk.c | 1 -
drivers/usb/host/xhci-ring.c | 14 +-
drivers/usb/host/xhci.h | 2 +-
drivers/usb/musb/musb_gadget.c | 2 -
drivers/usb/roles/class.c | 5 +-
drivers/usb/storage/alauda.c | 2 +
drivers/usb/typec/bus.c | 2 +-
drivers/usb/typec/class.c | 43 +
drivers/usb/typec/tcpm/tcpci.c | 5 +-
drivers/usb/typec/tcpm/tcpm.c | 24 +-
drivers/usb/typec/tipd/core.c | 4 +-
drivers/vfio/platform/vfio_platform_common.c | 3 +-
drivers/video/fbdev/Kconfig | 2 +-
drivers/video/fbdev/core/fbcon.c | 3 +-
drivers/video/fbdev/ep93xx-fb.c | 4 +-
drivers/video/fbdev/geode/Kconfig | 1 +
drivers/video/fbdev/hyperv_fb.c | 8 +-
drivers/video/fbdev/pm2fb.c | 9 +-
drivers/video/fbdev/uvesafb.c | 1 +
drivers/video/fbdev/vermilion/vermilion.c | 4 +-
drivers/video/fbdev/via/via-core.c | 9 +-
drivers/vme/bridges/vme_fake.c | 2 +
drivers/vme/bridges/vme_tsi148.c | 1 +
drivers/xen/privcmd.c | 2 +-
fs/afs/fs_probe.c | 5 +-
fs/binfmt_misc.c | 8 +-
fs/btrfs/file.c | 10 +-
fs/char_dev.c | 2 +-
fs/configfs/dir.c | 2 +
fs/debugfs/file.c | 28 +-
fs/f2fs/gc.c | 10 +-
fs/f2fs/segment.c | 6 +-
fs/f2fs/super.c | 2 +-
fs/hfs/inode.c | 2 +
fs/hfs/trans.c | 2 +-
fs/hugetlbfs/inode.c | 6 +-
fs/jfs/jfs_dmap.c | 27 +-
fs/jfs/namei.c | 2 +-
fs/ksmbd/mgmt/user_session.c | 8 +-
fs/libfs.c | 22 +-
fs/lockd/svcsubs.c | 17 +-
fs/nfs/namespace.c | 2 +-
fs/nfs/nfs4proc.c | 38 +-
fs/nfs/nfs4state.c | 2 +
fs/nfs/nfs4xdr.c | 12 +-
fs/nfsd/nfs2acl.c | 32 +-
fs/nfsd/nfs4callback.c | 4 +-
fs/nfsd/nfs4state.c | 51 +-
fs/nilfs2/the_nilfs.c | 73 +-
fs/ntfs3/bitmap.c | 2 +-
fs/ntfs3/super.c | 2 +-
fs/ntfs3/xattr.c | 2 +-
fs/ocfs2/stackglue.c | 8 +-
fs/orangefs/orangefs-debugfs.c | 29 +-
fs/orangefs/orangefs-mod.c | 8 +-
fs/overlayfs/dir.c | 10 +-
fs/overlayfs/file.c | 43 +-
fs/overlayfs/inode.c | 19 +-
fs/overlayfs/overlayfs.h | 13 +-
fs/overlayfs/ovl_entry.h | 2 +-
fs/overlayfs/super.c | 12 +-
fs/overlayfs/util.c | 47 +-
fs/pstore/Kconfig | 1 +
fs/pstore/pmsg.c | 7 +-
fs/pstore/ram.c | 2 +
fs/pstore/ram_core.c | 6 +-
fs/reiserfs/namei.c | 4 +
fs/reiserfs/xattr_security.c | 2 +-
fs/sysv/itree.c | 2 +-
fs/udf/namei.c | 8 +-
fs/xattr.c | 2 +-
include/dt-bindings/clock/imx8mn-clock.h | 12 +-
include/linux/debugfs.h | 19 +-
include/linux/eventfd.h | 2 +-
include/linux/fs.h | 12 +-
include/linux/gpio/consumer.h | 35 +-
include/linux/hyperv.h | 2 +
include/linux/iio/imu/adis.h | 63 +-
include/linux/libata.h | 79 +-
include/linux/netdevice.h | 58 +-
include/linux/overflow.h | 110 +-
include/linux/proc_fs.h | 2 +
include/linux/skmsg.h | 1 +
include/linux/soc/qcom/apr.h | 12 +-
include/linux/timerqueue.h | 2 +-
include/linux/usb/typec.h | 3 +
include/media/dvbdev.h | 32 +-
include/net/dst.h | 5 +-
include/net/mrp.h | 1 +
include/net/sock_reuseport.h | 2 +
include/net/tcp.h | 4 +-
include/sound/hdaudio.h | 2 +
include/sound/hdaudio_ext.h | 1 -
include/sound/pcm.h | 36 +-
include/trace/events/ib_mad.h | 13 +-
include/uapi/drm/drm_fourcc.h | 11 +
include/uapi/linux/idxd.h | 2 +-
include/uapi/linux/swab.h | 2 +-
include/uapi/sound/asequencer.h | 8 +-
kernel/Makefile | 2 +-
kernel/acct.c | 2 +
kernel/bpf/btf.c | 5 +
kernel/bpf/verifier.c | 127 +-
kernel/cpu.c | 60 +-
kernel/events/core.c | 8 +-
kernel/fork.c | 17 +-
kernel/futex/Makefile | 3 +
kernel/{futex.c => futex/core.c} | 28 +-
kernel/gcov/gcc_4_7.c | 5 +
kernel/irq/internals.h | 2 +
kernel/irq/irqdesc.c | 15 +-
kernel/padata.c | 15 +-
kernel/power/snapshot.c | 4 +-
kernel/rcu/tree.c | 2 +-
kernel/relay.c | 4 +-
kernel/sched/cpudeadline.c | 2 +-
kernel/sched/deadline.c | 4 +-
kernel/sched/fair.c | 190 +-
kernel/sched/rt.c | 4 +-
kernel/sched/sched.h | 14 +
kernel/trace/blktrace.c | 3 +-
kernel/trace/trace_events_hist.c | 2 +-
lib/debugobjects.c | 10 +
lib/fonts/fonts.c | 4 +-
lib/notifier-error-inject.c | 2 +-
lib/test_firmware.c | 1 +
lib/test_overflow.c | 98 +
net/802/mrp.c | 18 +-
net/9p/client.c | 5 +
net/bluetooth/hci_core.c | 2 +-
net/bluetooth/mgmt.c | 2 +-
net/bluetooth/rfcomm/core.c | 2 +-
net/bpf/test_run.c | 3 -
net/core/dev.c | 14 +-
net/core/filter.c | 11 +-
net/core/skbuff.c | 3 +
net/core/skmsg.c | 9 +-
net/core/sock.c | 2 +-
net/core/sock_map.c | 2 +
net/core/sock_reuseport.c | 94 +-
net/core/stream.c | 6 +
net/dsa/tag_8021q.c | 11 +-
net/ethtool/ioctl.c | 3 +-
net/hsr/hsr_device.c | 22 +-
net/hsr/hsr_forward.c | 7 +-
net/hsr/hsr_framereg.c | 25 +-
net/hsr/hsr_framereg.h | 3 +
net/ipv4/inet_connection_sock.c | 12 +-
net/ipv4/tcp_bpf.c | 19 +-
net/ipv4/udp_tunnel_core.c | 1 +
net/ipv6/sit.c | 22 +-
net/mac80211/iface.c | 1 +
net/netfilter/nf_conntrack_proto_icmpv6.c | 53 +
net/netfilter/nf_flow_table_offload.c | 6 +-
net/openvswitch/datapath.c | 25 +-
net/rxrpc/output.c | 2 +-
net/rxrpc/sendmsg.c | 2 +-
net/sched/ematch.c | 2 +
net/sctp/sysctl.c | 73 +-
net/sunrpc/clnt.c | 2 +-
net/sunrpc/xprtrdma/verbs.c | 2 +-
net/tls/tls_sw.c | 6 +-
net/unix/af_unix.c | 12 +-
net/vmw_vsock/vmci_transport.c | 6 +-
net/wireless/reg.c | 4 +-
samples/vfio-mdev/mdpy-fb.c | 8 +-
security/Kconfig.hardening | 3 +
security/apparmor/apparmorfs.c | 4 +-
security/apparmor/lsm.c | 4 +-
security/apparmor/policy.c | 2 +-
security/apparmor/policy_ns.c | 2 +-
security/apparmor/policy_unpack.c | 2 +-
security/integrity/digsig.c | 6 +-
security/integrity/ima/ima_policy.c | 51 +-
security/integrity/ima/ima_template.c | 4 +-
security/loadpin/loadpin.c | 30 +-
sound/core/pcm_native.c | 4 +-
sound/drivers/mts64.c | 3 +
sound/hda/ext/hdac_ext_stream.c | 17 -
sound/hda/hdac_stream.c | 27 +
sound/pci/asihpi/hpioctl.c | 2 +-
sound/pci/hda/hda_controller.c | 4 +-
sound/pci/hda/patch_hdmi.c | 1 +
sound/pci/hda/patch_realtek.c | 27 +
sound/soc/codecs/pcm512x.c | 8 +-
sound/soc/codecs/rt298.c | 7 +
sound/soc/codecs/rt5670.c | 2 -
sound/soc/codecs/wm8994.c | 5 +
sound/soc/generic/audio-graph-card.c | 4 +-
sound/soc/intel/skylake/skl.c | 7 +-
sound/soc/mediatek/common/mtk-btcvsd.c | 6 +-
sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 71 +-
sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c | 7 +-
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 14 +-
sound/soc/pxa/mmp-pcm.c | 2 +-
sound/soc/qcom/lpass-sc7180.c | 3 +
sound/soc/rockchip/rockchip_pdm.c | 1 +
sound/soc/rockchip/rockchip_spdif.c | 1 +
sound/usb/quirks-table.h | 2 +
tools/include/linux/kernel.h | 6 +
tools/lib/bpf/bpf.h | 7 +
tools/lib/bpf/btf.c | 8 +-
tools/lib/bpf/btf_dump.c | 31 +-
tools/lib/bpf/libbpf.c | 3 +
tools/objtool/check.c | 10 +
tools/perf/builtin-stat.c | 46 +-
tools/perf/builtin-trace.c | 32 +-
tools/perf/util/debug.c | 4 +
tools/perf/util/symbol-elf.c | 2 +-
tools/testing/selftests/bpf/config | 4 +
tools/testing/selftests/bpf/prog_tests/bpf_nf.c | 48 +
tools/testing/selftests/bpf/progs/test_bpf_nf.c | 109 +
.../selftests/drivers/net/netdevsim/devlink.sh | 4 +-
tools/testing/selftests/efivarfs/efivarfs.sh | 5 +
.../ftrace/test.d/ftrace/func_event_triggers.tc | 15 +-
.../kvm/memslot_modification_stress_test.c | 2 +-
.../selftests/netfilter/conntrack_icmp_related.sh | 36 +-
.../selftests/powerpc/dscr/dscr_sysfs_test.c | 5 +-
tools/testing/selftests/proc/proc-uptime-002.c | 3 +-
727 files changed, 39668 insertions(+), 3853 deletions(-)
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 001/731] drm/amd/display: Manually adjust strobe for DCN303
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
@ 2022-12-28 14:31 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 002/731] usb: musb: remove extra check in musb_gadget_vbus_draw Greg Kroah-Hartman
` (740 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jun Lei, Agustin Gutierrez,
Daniel Wheeler, Martin Leung, Alex Deucher, Mario Limonciello
From: Martin Leung <Martin.Leung@amd.com>
commit a9a1ac44074ff8cab7d519277f93341e14557f83 upstream.
why:
DCN303's 4 channel SOC BB causes problems at strobe
how:
workaround to manually adjust strobe calculation using FCLK
restrict.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c
@@ -1344,6 +1344,20 @@ void dcn303_update_bw_bounding_box(struc
dcn3_03_soc.clock_limits[i].phyclk_d18_mhz = dcn3_03_soc.clock_limits[0].phyclk_d18_mhz;
dcn3_03_soc.clock_limits[i].dscclk_mhz = dcn3_03_soc.clock_limits[0].dscclk_mhz;
}
+
+ // WA: patch strobe modes to compensate for DCN303 BW issue
+ if (dcn3_03_soc.num_chans <= 4) {
+ for (i = 0; i < dcn3_03_soc.num_states; i++) {
+ if (dcn3_03_soc.clock_limits[i].dram_speed_mts > 1700)
+ break;
+
+ if (dcn3_03_soc.clock_limits[i].dram_speed_mts >= 1500) {
+ dcn3_03_soc.clock_limits[i].dcfclk_mhz = 100;
+ dcn3_03_soc.clock_limits[i].fabricclk_mhz = 100;
+ }
+ }
+ }
+
/* re-init DML with updated bb */
dml_init_instance(&dc->dml, &dcn3_03_soc, &dcn3_03_ip, DML_PROJECT_DCN30);
if (dc->current_state)
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 002/731] usb: musb: remove extra check in musb_gadget_vbus_draw
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 001/731] drm/amd/display: Manually adjust strobe for DCN303 Greg Kroah-Hartman
@ 2022-12-28 14:31 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 003/731] arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins Greg Kroah-Hartman
` (739 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, stable, Ivaylo Dimitrov, Sasha Levin
From: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
[ Upstream commit ecec4b20d29c3d6922dafe7d2555254a454272d2 ]
The checks for musb->xceiv and musb->xceiv->set_power duplicate those in
usb_phy_set_power(), so there is no need of them. Moreover, not calling
usb_phy_set_power() results in usb_phy_set_charger_current() not being
called, so current USB config max current is not propagated through USB
charger framework and charger drivers may try to draw more current than
allowed or possible.
Fix that by removing those extra checks and calling usb_phy_set_power()
directly.
Tested on Motorola Droid4 and Nokia N900
Fixes: a9081a008f84 ("usb: phy: Add USB charger support")
Cc: stable <stable@kernel.org>
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Link: https://lore.kernel.org/r/1669400475-4762-1-git-send-email-ivo.g.dimitrov.75@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/musb/musb_gadget.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index dc67fff8e941..22c3df49ba8a 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1628,8 +1628,6 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
{
struct musb *musb = gadget_to_musb(gadget);
- if (!musb->xceiv->set_power)
- return -EOPNOTSUPP;
return usb_phy_set_power(musb->xceiv, mA);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 003/731] arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 001/731] drm/amd/display: Manually adjust strobe for DCN303 Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 002/731] usb: musb: remove extra check in musb_gadget_vbus_draw Greg Kroah-Hartman
@ 2022-12-28 14:31 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 004/731] arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable Greg Kroah-Hartman
` (738 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski,
Bjorn Andersson, Konrad Dybcio, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 4871d3c38893c8a585e3e96364b7fb91cda8322e ]
When BLSPI1 (originally SPI0, later renamed in commit f82c48d46852
("arm64: dts: qcom: ipq6018: correct QUP peripheral labels")) was added,
the device node lacked respective pin configuration assignment.
Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221006124659.217540-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index 5aec18308712..5310259d03dc 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -37,6 +37,8 @@ &i2c_1 {
&spi_0 {
cs-select = <0>;
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
status = "okay";
m25p80@0 {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 004/731] arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2022-12-28 14:31 ` [PATCH 5.15 003/731] arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins Greg Kroah-Hartman
@ 2022-12-28 14:31 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 005/731] arm64: dts: qcom: msm8996: Add MSM8996 Pro support Greg Kroah-Hartman
` (737 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Konrad Dybcio, Krzysztof Kozlowski,
Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 7ff4a646fae3697b039c6b684786a1e309e8445c ]
The property to disable bias is "bias-disable".
Fixes: e76c7e1f15fe ("arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen")
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index b15d085db05a..effbd6a9c989 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -591,7 +591,7 @@ ts_int_default: ts-int-default {
pins = "gpio39";
function = "gpio";
drive-strength = <2>;
- bias-disabled;
+ bias-disable;
input-enable;
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 005/731] arm64: dts: qcom: msm8996: Add MSM8996 Pro support
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2022-12-28 14:31 ` [PATCH 5.15 004/731] arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable Greg Kroah-Hartman
@ 2022-12-28 14:31 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 006/731] arm64: dts: qcom: msm8996: fix supported-hw in cpufreq OPP tables Greg Kroah-Hartman
` (736 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yassine Oudjana, Dmitry Baryshkov,
Krzysztof Kozlowski, Bjorn Andersson, Sasha Levin
From: Yassine Oudjana <y.oudjana@protonmail.com>
[ Upstream commit 8898c9748a872866f8c2973e719b26bf7c6ab64e ]
Qualcomm MSM8996 Pro is a variant of MSM8996 with higher frequencies
supported both on CPU and GPU. There are other minor hardware
differencies in the CPU and GPU regulators and bus fabrics.
However this results in significant differences between 8996 and 8996
Pro CPU OPP tables. Judging from msm-3.18 there are only few common
frequencies supported by both msm8996 and msm8996pro. Rather than
hacking the tables for msm8996, split msm8996pro support into a separate
file. Later this would allow having additional customizations for the
CBF, CPR, retulators, etc.
[DB: dropped all non-CPU-OPP changes]
Fixes: 90173a954a22 ("arm64: dts: qcom: msm8996: Add CPU opps")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
[DB: Realigned supported-hw to keep compat with current cpufreq driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-3-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 82 +++----
arch/arm64/boot/dts/qcom/msm8996pro.dtsi | 266 +++++++++++++++++++++++
2 files changed, 307 insertions(+), 41 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/msm8996pro.dtsi
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 6077c3601951..4f472306f10f 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -142,82 +142,82 @@ cluster0_opp: opp_table0 {
/* Nominal fmax for now */
opp-307200000 {
opp-hz = /bits/ 64 <307200000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-422400000 {
opp-hz = /bits/ 64 <422400000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-556800000 {
opp-hz = /bits/ 64 <556800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-729600000 {
opp-hz = /bits/ 64 <729600000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-844800000 {
opp-hz = /bits/ 64 <844800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-960000000 {
opp-hz = /bits/ 64 <960000000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1036800000 {
opp-hz = /bits/ 64 <1036800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1190400000 {
opp-hz = /bits/ 64 <1190400000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1228800000 {
opp-hz = /bits/ 64 <1228800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1593600000 {
opp-hz = /bits/ 64 <1593600000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
};
@@ -230,127 +230,127 @@ cluster1_opp: opp_table1 {
/* Nominal fmax for now */
opp-307200000 {
opp-hz = /bits/ 64 <307200000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-403200000 {
opp-hz = /bits/ 64 <403200000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-556800000 {
opp-hz = /bits/ 64 <556800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-729600000 {
opp-hz = /bits/ 64 <729600000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-806400000 {
opp-hz = /bits/ 64 <806400000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-883200000 {
opp-hz = /bits/ 64 <883200000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-940800000 {
opp-hz = /bits/ 64 <940800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1036800000 {
opp-hz = /bits/ 64 <1036800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1190400000 {
opp-hz = /bits/ 64 <1190400000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1248000000 {
opp-hz = /bits/ 64 <1248000000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1555200000 {
opp-hz = /bits/ 64 <1555200000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1632000000 {
opp-hz = /bits/ 64 <1632000000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1708800000 {
opp-hz = /bits/ 64 <1708800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1785600000 {
opp-hz = /bits/ 64 <1785600000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1824000000 {
opp-hz = /bits/ 64 <1824000000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1920000000 {
opp-hz = /bits/ 64 <1920000000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1996800000 {
opp-hz = /bits/ 64 <1996800000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-2073600000 {
opp-hz = /bits/ 64 <2073600000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-2150400000 {
opp-hz = /bits/ 64 <2150400000>;
- opp-supported-hw = <0x77>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
new file mode 100644
index 000000000000..63e1b4ec7a36
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+ /delete-node/ opp-table-cluster0;
+ /delete-node/ opp-table-cluster1;
+
+ /*
+ * On MSM8996 Pro the cpufreq driver shifts speed bins into the high
+ * nibble of supported hw, so speed bin 0 becomes 0x10, speed bin 1
+ * becomes 0x20, speed 2 becomes 0x40.
+ */
+
+ cluster0_opp: opp-table-cluster0 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+ opp-shared;
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-460800000 {
+ opp-hz = /bits/ 64 <460800000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-537600000 {
+ opp-hz = /bits/ 64 <537600000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-614400000 {
+ opp-hz = /bits/ 64 <614400000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-768000000 {
+ opp-hz = /bits/ 64 <768000000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-844800000 {
+ opp-hz = /bits/ 64 <844800000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-979200000 {
+ opp-hz = /bits/ 64 <979200000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1132800000 {
+ opp-hz = /bits/ 64 <1132800000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1209600000 {
+ opp-hz = /bits/ 64 <1209600000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1286400000 {
+ opp-hz = /bits/ 64 <1286400000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1363200000 {
+ opp-hz = /bits/ 64 <1363200000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 <1440000000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 <1593600000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1996800000 {
+ opp-hz = /bits/ 64 <1996800000>;
+ opp-supported-hw = <0x20>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2188800000 {
+ opp-hz = /bits/ 64 <2188800000>;
+ opp-supported-hw = <0x10>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
+ cluster1_opp: opp-table-cluster1 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+ opp-shared;
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-460800000 {
+ opp-hz = /bits/ 64 <460800000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-537600000 {
+ opp-hz = /bits/ 64 <537600000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-614400000 {
+ opp-hz = /bits/ 64 <614400000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-748800000 {
+ opp-hz = /bits/ 64 <748800000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-825600000 {
+ opp-hz = /bits/ 64 <825600000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-979200000 {
+ opp-hz = /bits/ 64 <979200000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1132800000 {
+ opp-hz = /bits/ 64 <1132800000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1209600000 {
+ opp-hz = /bits/ 64 <1209600000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1286400000 {
+ opp-hz = /bits/ 64 <1286400000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1363200000 {
+ opp-hz = /bits/ 64 <1363200000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 <1440000000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 <1593600000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1670400000 {
+ opp-hz = /bits/ 64 <1670400000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1747200000 {
+ opp-hz = /bits/ 64 <1747200000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1824000000 {
+ opp-hz = /bits/ 64 <1824000000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1900800000 {
+ opp-hz = /bits/ 64 <1900800000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1977600000 {
+ opp-hz = /bits/ 64 <1977600000>;
+ opp-supported-hw = <0x30>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2054400000 {
+ opp-hz = /bits/ 64 <2054400000>;
+ opp-supported-hw = <0x30>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2150400000 {
+ opp-hz = /bits/ 64 <2150400000>;
+ opp-supported-hw = <0x30>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2246400000 {
+ opp-hz = /bits/ 64 <2246400000>;
+ opp-supported-hw = <0x10>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2342400000 {
+ opp-hz = /bits/ 64 <2342400000>;
+ opp-supported-hw = <0x10>;
+ clock-latency-ns = <200000>;
+ };
+ };
+};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 006/731] arm64: dts: qcom: msm8996: fix supported-hw in cpufreq OPP tables
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2022-12-28 14:31 ` [PATCH 5.15 005/731] arm64: dts: qcom: msm8996: Add MSM8996 Pro support Greg Kroah-Hartman
@ 2022-12-28 14:31 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 007/731] arm64: dts: qcom: msm8996: fix GPU OPP table Greg Kroah-Hartman
` (735 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Baryshkov,
Krzysztof Kozlowski, Bjorn Andersson, Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 0154caaa2b748e7414a4ec3c6ee60e8f483b2d4f ]
Adjust MSM8996 cpufreq tables according to tables in msm-3.18. Some of
the frequencies are not supported on speed bins other than 0. Also other
speed bins support intermediate topmost frequencies, not supported on
speed bin 0. Implement all these differencies.
Fixes: 90173a954a22 ("arm64: dts: qcom: msm8996: Add CPU opps")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-5-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 38 ++++++++++++++++++++-------
1 file changed, 29 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 4f472306f10f..032c6cd635e2 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -202,22 +202,32 @@ opp-1228800000 {
};
opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
- opp-supported-hw = <0x7>;
+ opp-supported-hw = <0x5>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1363200000 {
+ opp-hz = /bits/ 64 <1363200000>;
+ opp-supported-hw = <0x2>;
clock-latency-ns = <200000>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
- opp-supported-hw = <0x7>;
+ opp-supported-hw = <0x5>;
clock-latency-ns = <200000>;
};
opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
- opp-supported-hw = <0x7>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ opp-supported-hw = <0x04>;
clock-latency-ns = <200000>;
};
opp-1593600000 {
opp-hz = /bits/ 64 <1593600000>;
- opp-supported-hw = <0x7>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
};
@@ -328,29 +338,39 @@ opp-1785600000 {
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
+ opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-supported-hw = <0x6>;
+ clock-latency-ns = <200000>;
+ };
opp-1824000000 {
opp-hz = /bits/ 64 <1824000000>;
- opp-supported-hw = <0x7>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1900800000 {
+ opp-hz = /bits/ 64 <1900800000>;
+ opp-supported-hw = <0x4>;
clock-latency-ns = <200000>;
};
opp-1920000000 {
opp-hz = /bits/ 64 <1920000000>;
- opp-supported-hw = <0x7>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
opp-1996800000 {
opp-hz = /bits/ 64 <1996800000>;
- opp-supported-hw = <0x7>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
opp-2073600000 {
opp-hz = /bits/ 64 <2073600000>;
- opp-supported-hw = <0x7>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
opp-2150400000 {
opp-hz = /bits/ 64 <2150400000>;
- opp-supported-hw = <0x7>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 007/731] arm64: dts: qcom: msm8996: fix GPU OPP table
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2022-12-28 14:31 ` [PATCH 5.15 006/731] arm64: dts: qcom: msm8996: fix supported-hw in cpufreq OPP tables Greg Kroah-Hartman
@ 2022-12-28 14:31 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 008/731] ARM: dts: qcom: apq8064: fix coresight compatible Greg Kroah-Hartman
` (734 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Baryshkov,
Krzysztof Kozlowski, Bjorn Andersson, Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 0d440d811e6e2f37093e54db55bc27fe66678170 ]
Fix Adreno OPP table according to the msm-3.18. Enable 624 MHz for the
speed bin 3 and 560 MHz for bins 2 and 3.
Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-7-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 032c6cd635e2..70187fd03a26 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -995,17 +995,17 @@ gpu_opp_table: opp-table {
compatible ="operating-points-v2";
/*
- * 624Mhz and 560Mhz are only available on speed
- * bin (1 << 0). All the rest are available on
- * all bins of the hardware
+ * 624Mhz is only available on speed bins 0 and 3.
+ * 560Mhz is only available on speed bins 0, 2 and 3.
+ * All the rest are available on all bins of the hardware.
*/
opp-624000000 {
opp-hz = /bits/ 64 <624000000>;
- opp-supported-hw = <0x01>;
+ opp-supported-hw = <0x09>;
};
opp-560000000 {
opp-hz = /bits/ 64 <560000000>;
- opp-supported-hw = <0x01>;
+ opp-supported-hw = <0x0d>;
};
opp-510000000 {
opp-hz = /bits/ 64 <510000000>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 008/731] ARM: dts: qcom: apq8064: fix coresight compatible
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2022-12-28 14:31 ` [PATCH 5.15 007/731] arm64: dts: qcom: msm8996: fix GPU OPP table Greg Kroah-Hartman
@ 2022-12-28 14:31 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 009/731] arm64: dts: qcom: sdm630: fix UART1 pin bias Greg Kroah-Hartman
` (733 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Luca Weiss, Krzysztof Kozlowski,
Konrad Dybcio, Bjorn Andersson, Sasha Levin
From: Luca Weiss <luca@z3ntu.xyz>
[ Upstream commit a42b1ee868361f1cb0492f1bdaefb43e0751e468 ]
There's a typo missing the arm, prefix of arm,coresight-etb10. Fix it to
make devicetree validation happier.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Fixes: 7a5c275fd821 ("ARM: dts: qcom: Add apq8064 CoreSight components")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221013190657.48499-3-luca@z3ntu.xyz
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index d1c1c6aab2b8..0e830476fefd 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1571,7 +1571,7 @@ wifi {
};
etb@1a01000 {
- compatible = "coresight-etb10", "arm,primecell";
+ compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0x1a01000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 009/731] arm64: dts: qcom: sdm630: fix UART1 pin bias
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2022-12-28 14:31 ` [PATCH 5.15 008/731] ARM: dts: qcom: apq8064: fix coresight compatible Greg Kroah-Hartman
@ 2022-12-28 14:31 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 010/731] arm64: dts: qcom: sdm845-cheza: fix AP suspend " Greg Kroah-Hartman
` (732 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski,
Douglas Anderson, Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 780f836fe071a9e8703fe6a05ae00129acf83391 ]
There is no "bias-no-pull" property. Assume intentions were disabling
bias.
Fixes: b190fb010664 ("arm64: dts: qcom: sdm630: Add sdm630 dts file")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 952bb133914f..c2e1a0d9a272 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -768,7 +768,7 @@ rx-cts-rts {
pins = "gpio17", "gpio18", "gpio19";
function = "gpio";
drive-strength = <2>;
- bias-no-pull;
+ bias-disable;
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 010/731] arm64: dts: qcom: sdm845-cheza: fix AP suspend pin bias
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2022-12-28 14:31 ` [PATCH 5.15 009/731] arm64: dts: qcom: sdm630: fix UART1 pin bias Greg Kroah-Hartman
@ 2022-12-28 14:31 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 011/731] arm64: dts: qcom: msm8916: Drop MSS fallback compatible Greg Kroah-Hartman
` (731 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski,
Douglas Anderson, Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 9bce41fab14da8f21027dc9847535ef5e22cbe8b ]
There is no "bias-no-pull" property. Assume intentions were disabling
bias.
Fixes: 79e7739f7b87 ("arm64: dts: qcom: sdm845-cheza: add initial cheza dt")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index dfd1b42c07fd..3566db1d7357 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -1299,7 +1299,7 @@ ap_suspend_l_assert: ap_suspend_l_assert {
config {
pins = "gpio126";
function = "gpio";
- bias-no-pull;
+ bias-disable;
drive-strength = <2>;
output-low;
};
@@ -1309,7 +1309,7 @@ ap_suspend_l_deassert: ap_suspend_l_deassert {
config {
pins = "gpio126";
function = "gpio";
- bias-no-pull;
+ bias-disable;
drive-strength = <2>;
output-high;
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 011/731] arm64: dts: qcom: msm8916: Drop MSS fallback compatible
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2022-12-28 14:31 ` [PATCH 5.15 010/731] arm64: dts: qcom: sdm845-cheza: fix AP suspend " Greg Kroah-Hartman
@ 2022-12-28 14:31 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 012/731] objtool, kcsan: Add volatile read/write instrumentation to whitelist Greg Kroah-Hartman
` (730 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stephan Gerhold,
Krzysztof Kozlowski, Bjorn Andersson, Sasha Levin
From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
[ Upstream commit ff02ac621634e82c0c34d02a79d402ae700cdfd0 ]
MSM8916 was originally using the "qcom,q6v5-pil" compatible for the
MSS remoteproc. Later it was decided to use SoC-specific compatibles
instead, so "qcom,msm8916-mss-pil" is now the preferred compatible.
Commit 60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific
compatibles to SCM/MSS") updated the MSM8916 device tree to make use of
the new compatible but still kept the old "qcom,q6v5-pil" as fallback.
This is inconsistent with other SoCs and conflicts with the description
in the binding documentation (which says that only one compatible should
be present). Also, it has no functional advantage since older kernels
could not handle this DT anyway (e.g. "power-domains" in the MSS node is
only supported by kernels that also support "qcom,msm8916-mss-pil").
Make this consistent with other SoCs by using only the
"qcom,msm8916-mss-pil" compatible.
Fixes: 60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220718140344.1831731-2-stephan.gerhold@kernkonzept.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 19e201f52b16..b967dbfba3b8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1307,7 +1307,7 @@ spmi_bus: spmi@200f000 {
};
mpss: remoteproc@4080000 {
- compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
+ compatible = "qcom,msm8916-mss-pil";
reg = <0x04080000 0x100>,
<0x04020000 0x040>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 012/731] objtool, kcsan: Add volatile read/write instrumentation to whitelist
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2022-12-28 14:31 ` [PATCH 5.15 011/731] arm64: dts: qcom: msm8916: Drop MSS fallback compatible Greg Kroah-Hartman
@ 2022-12-28 14:31 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 013/731] ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96 Greg Kroah-Hartman
` (729 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:31 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marco Elver, Dmitry Vyukov,
Paul E. McKenney, Sasha Levin
From: Marco Elver <elver@google.com>
[ Upstream commit 63646fcba5bb4b59a19031c21913f94e46a3d0d4 ]
Adds KCSAN's volatile instrumentation to objtool's uaccess whitelist.
Recent kernel change have shown that this was missing from the uaccess
whitelist (since the first upstreamed version of KCSAN):
mm/gup.o: warning: objtool: fault_in_readable+0x101: call to __tsan_volatile_write1() with UACCESS enabled
Fixes: 75d75b7a4d54 ("kcsan: Support distinguishing volatile accesses")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/objtool/check.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 72e5d23f1ad8..edac5aaa2802 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -846,6 +846,16 @@ static const char *uaccess_safe_builtin[] = {
"__tsan_read_write4",
"__tsan_read_write8",
"__tsan_read_write16",
+ "__tsan_volatile_read1",
+ "__tsan_volatile_read2",
+ "__tsan_volatile_read4",
+ "__tsan_volatile_read8",
+ "__tsan_volatile_read16",
+ "__tsan_volatile_write1",
+ "__tsan_volatile_write2",
+ "__tsan_volatile_write4",
+ "__tsan_volatile_write8",
+ "__tsan_volatile_write16",
"__tsan_atomic8_load",
"__tsan_atomic16_load",
"__tsan_atomic32_load",
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 013/731] ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2022-12-28 14:31 ` [PATCH 5.15 012/731] objtool, kcsan: Add volatile read/write instrumentation to whitelist Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 014/731] ARM: dts: stm32: Fix AV96 WLAN regulator gpio property Greg Kroah-Hartman
` (728 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marek Vasut, Patrice Chotard,
Manivannan Sadhasivam, Alexandre Torgue, Sasha Levin
From: Marek Vasut <marex@denx.de>
[ Upstream commit 3b835f1b8acef53c8882b25f40f48d7f5982c938 ]
The Avenger96 is populated with STM32MP157A DHCOR SoM, drop the
stm32mp15xc.dtsi which should only be included in DTs of devices
which are populated with STM32MP15xC/F SoC as the stm32mp15xc.dtsi
enables CRYP block not present in the STM32MP15xA/D SoC .
Fixes: 7e76f82acd9e1 ("ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
index 2e3c9fbb4eb3..275167f26fd9 100644
--- a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
@@ -13,7 +13,6 @@
/dts-v1/;
#include "stm32mp157.dtsi"
-#include "stm32mp15xc.dtsi"
#include "stm32mp15xx-dhcor-som.dtsi"
#include "stm32mp15xx-dhcor-avenger96.dtsi"
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 014/731] ARM: dts: stm32: Fix AV96 WLAN regulator gpio property
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 013/731] ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96 Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 015/731] drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static Greg Kroah-Hartman
` (727 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marek Vasut, Alexandre Torgue, Sasha Levin
From: Marek Vasut <marex@denx.de>
[ Upstream commit d5d577e3d50713ad11d98dbdaa48bb494346c26d ]
The WLAN regulator uses 'gpios' property instead of 'gpio' to specify
regulator enable GPIO. While the former is also currently handled by
the Linux kernel regulator-fixed driver, the later is the correct one
per DT bindings. Update the DT to use the later.
Fixes: 7dd5cbba42c93 ("ARM: dts: stm32: Enable WiFi on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 8eb51d84b698..d3375ad8c91f 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -100,7 +100,7 @@ wlan_pwr: regulator-wlan {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 015/731] drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 014/731] ARM: dts: stm32: Fix AV96 WLAN regulator gpio property Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 016/731] arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name Greg Kroah-Hartman
` (726 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen Jiahao, Nishanth Menon, Sasha Levin
From: Chen Jiahao <chenjiahao16@huawei.com>
[ Upstream commit adf85adc2a7199b41e7a4da083bd17274a3d6969 ]
There is a sparse warning shown below:
drivers/soc/ti/knav_qmss_queue.c:70:12: warning: symbol
'knav_acc_firmwares' was not declared. Should it be static?
Since 'knav_acc_firmwares' is only called within knav_qmss_queue.c,
mark it as static to fix the warning.
Fixes: 96ee19becc3b ("soc: ti: add firmware file name as part of the driver")
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221019153212.72350-1-chenjiahao16@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/ti/knav_qmss_queue.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index 2ac3856b8d42..920eca809084 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -67,7 +67,7 @@ static DEFINE_MUTEX(knav_dev_lock);
* Newest followed by older ones. Search is done from start of the array
* until a firmware file is found.
*/
-const char *knav_acc_firmwares[] = {"ks2_qmss_pdsp_acc48.bin"};
+static const char * const knav_acc_firmwares[] = {"ks2_qmss_pdsp_acc48.bin"};
static bool device_ready;
bool knav_qmss_device_ready(void)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 016/731] arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 015/731] drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 017/731] arm64: dts: qcom: sm8250: correct LPASS pin pull down Greg Kroah-Hartman
` (725 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marijn Suijten,
AngeloGioacchino Del Regno, Bjorn Andersson, Sasha Levin
From: Marijn Suijten <marijn.suijten@somainline.org>
[ Upstream commit 02549ba5de0a09a27616496c3512db5af4ad7862 ]
The register address in the node name is shadowing vph_pwr@83, whereas
the ADC5_VCOIN register resolves to 0x85. Fix this copy-paste
discrepancy.
Fixes: 4bf097540506 ("arm64: dts: qcom: pm660: Add VADC and temp alarm nodes")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926190148.283805-3-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/pm660.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
index e847d7209afc..affc736d154a 100644
--- a/arch/arm64/boot/dts/qcom/pm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -152,7 +152,7 @@ vadc_vph_pwr: vph_pwr@83 {
qcom,pre-scaling = <1 3>;
};
- vcoin: vcoin@83 {
+ vcoin: vcoin@85 {
reg = <ADC5_VCOIN>;
qcom,decimation = <1024>;
qcom,pre-scaling = <1 3>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 017/731] arm64: dts: qcom: sm8250: correct LPASS pin pull down
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 016/731] arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 018/731] soc: qcom: llcc: make irq truly optional Greg Kroah-Hartman
` (724 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski, Neil Armstrong,
Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 195a0a11d66d6c696cbcf398d6bc3f3a3a462f7c ]
The pull-down property is actually bias-pull-down.
Fixes: 3160c1b894d9 ("arm64: dts: qcom: sm8250: add lpass lpi pin controller node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927153429.55365-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index b710bca45648..9a95c15c7e8b 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1933,7 +1933,7 @@ data {
pins = "gpio7";
function = "dmic1_data";
drive-strength = <2>;
- pull-down;
+ bias-pull-down;
input-enable;
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 018/731] soc: qcom: llcc: make irq truly optional
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 017/731] arm64: dts: qcom: sm8250: correct LPASS pin pull down Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 019/731] arm64: dts: qcom: Correct QMP PHY child node name Greg Kroah-Hartman
` (723 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Luca Weiss, Bjorn Andersson, Sasha Levin
From: Luca Weiss <luca.weiss@fairphone.com>
[ Upstream commit c882c899ead3545102a4d71b5fbe73b9e4bc2657 ]
The function platform_get_irq prints an error message into the kernel
log when the irq isn't found.
Since the interrupt is actually optional and not provided by some SoCs,
use platform_get_irq_optional which does not print an error message.
Fixes: c081f3060fab ("soc: qcom: Add support to register LLCC EDAC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104153041.412020-1-luca.weiss@fairphone.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/qcom/llcc-qcom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index cabd8870316d..47d41804fdf6 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -607,7 +607,7 @@ static int qcom_llcc_probe(struct platform_device *pdev)
if (ret)
goto err;
- drv_data->ecc_irq = platform_get_irq(pdev, 0);
+ drv_data->ecc_irq = platform_get_irq_optional(pdev, 0);
if (drv_data->ecc_irq >= 0) {
llcc_edac = platform_device_register_data(&pdev->dev,
"qcom_llcc_edac", -1, drv_data,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 019/731] arm64: dts: qcom: Correct QMP PHY child node name
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 018/731] soc: qcom: llcc: make irq truly optional Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 020/731] arm64: dts: qcom: sm8150: fix UFS PHY registers Greg Kroah-Hartman
` (722 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shawn Guo, Bjorn Andersson, Sasha Levin
From: Shawn Guo <shawn.guo@linaro.org>
[ Upstream commit 1351512f29b4348e6b497f6343896c1033d409b4 ]
Many child nodes of QMP PHY are named without following bindings schema
and causing dtbs_check warnings like below.
phy@1c06000: 'lane@1c06800' does not match any of the regexes: '^phy@[0-9a-f]+$'
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml
Correct them to fix the warnings.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-5-shawn.guo@linaro.org
Stable-dep-of: 36a31b3a8d9b ("arm64: dts: qcom: sm8150: fix UFS PHY registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 +++++-----
arch/arm64/boot/dts/qcom/msm8998.dtsi | 6 +++---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 +++++-----
arch/arm64/boot/dts/qcom/sm8150.dtsi | 6 +++---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 +++++-----
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
8 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index ce4c2b4a5fc0..30ac0b2e8c89 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -401,7 +401,7 @@ pcie_phy: phy@84000 {
reset-names = "phy",
"common";
- pcie_phy0: lane@84200 {
+ pcie_phy0: phy@84200 {
reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */
<0x0 0x84400 0x0 0x200>, /* Serdes Rx */
<0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 6b9ac0550490..9d4019e0949a 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -106,7 +106,7 @@ ssphy_1: phy@58000 {
reset-names = "phy","common";
status = "disabled";
- usb1_ssphy: lane@58200 {
+ usb1_ssphy: phy@58200 {
reg = <0x00058200 0x130>, /* Tx */
<0x00058400 0x200>, /* Rx */
<0x00058800 0x1f8>, /* PCS */
@@ -149,7 +149,7 @@ ssphy_0: phy@78000 {
reset-names = "phy","common";
status = "disabled";
- usb0_ssphy: lane@78200 {
+ usb0_ssphy: phy@78200 {
reg = <0x00078200 0x130>, /* Tx */
<0x00078400 0x200>, /* Rx */
<0x00078800 0x1f8>, /* PCS */
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 70187fd03a26..40174220e8e2 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -618,7 +618,7 @@ pcie_phy: phy@34000 {
reset-names = "phy", "common", "cfg";
status = "disabled";
- pciephy_0: lane@35000 {
+ pciephy_0: phy@35000 {
reg = <0x00035000 0x130>,
<0x00035200 0x200>,
<0x00035400 0x1dc>;
@@ -631,7 +631,7 @@ pciephy_0: lane@35000 {
reset-names = "lane0";
};
- pciephy_1: lane@36000 {
+ pciephy_1: phy@36000 {
reg = <0x00036000 0x130>,
<0x00036200 0x200>,
<0x00036400 0x1dc>;
@@ -644,7 +644,7 @@ pciephy_1: lane@36000 {
reset-names = "lane1";
};
- pciephy_2: lane@37000 {
+ pciephy_2: phy@37000 {
reg = <0x00037000 0x130>,
<0x00037200 0x200>,
<0x00037400 0x1dc>;
@@ -1763,7 +1763,7 @@ ufsphy: phy@627000 {
reset-names = "ufsphy";
status = "disabled";
- ufsphy_lane: lanes@627400 {
+ ufsphy_lane: phy@627400 {
reg = <0x627400 0x12c>,
<0x627600 0x200>,
<0x627c00 0x1b4>;
@@ -2618,7 +2618,7 @@ usb3phy: phy@7410000 {
reset-names = "phy", "common";
status = "disabled";
- ssusb_phy_0: lane@7410200 {
+ ssusb_phy_0: phy@7410200 {
reg = <0x07410200 0x200>,
<0x07410400 0x130>,
<0x07410600 0x1a8>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 228339f81c32..5350b911f4f6 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -994,7 +994,7 @@ pcie_phy: phy@1c06000 {
vdda-phy-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l2a_1p2>;
- pciephy: lane@1c06800 {
+ pciephy: phy@1c06800 {
reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
#phy-cells = <0>;
@@ -1066,7 +1066,7 @@ ufsphy: phy@1da7000 {
reset-names = "ufsphy";
resets = <&ufshc 0>;
- ufsphy_lanes: lanes@1da7400 {
+ ufsphy_lanes: phy@1da7400 {
reg = <0x01da7400 0x128>,
<0x01da7600 0x1fc>,
<0x01da7c00 0x1dc>,
@@ -1999,7 +1999,7 @@ usb3phy: phy@c010000 {
<&gcc GCC_USB3PHY_PHY_BCR>;
reset-names = "phy", "common";
- usb1_ssphy: lane@c010200 {
+ usb1_ssphy: phy@c010200 {
reg = <0xc010200 0x128>,
<0xc010400 0x200>,
<0xc010c00 0x20c>,
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index ea7a272d267a..ed293f635f14 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2064,7 +2064,7 @@ pcie0_phy: phy@1c06000 {
status = "disabled";
- pcie0_lane: lanes@1c06200 {
+ pcie0_lane: phy@1c06200 {
reg = <0 0x01c06200 0 0x128>,
<0 0x01c06400 0 0x1fc>,
<0 0x01c06800 0 0x218>,
@@ -2174,7 +2174,7 @@ pcie1_phy: phy@1c0a000 {
status = "disabled";
- pcie1_lane: lanes@1c06200 {
+ pcie1_lane: phy@1c06200 {
reg = <0 0x01c0a800 0 0x800>,
<0 0x01c0a800 0 0x800>,
<0 0x01c0b800 0 0x400>;
@@ -2302,7 +2302,7 @@ ufs_mem_phy: phy@1d87000 {
reset-names = "ufsphy";
status = "disabled";
- ufs_mem_phy_lanes: lanes@1d87400 {
+ ufs_mem_phy_lanes: phy@1d87400 {
reg = <0 0x01d87400 0 0x108>,
<0 0x01d87600 0 0x1e0>,
<0 0x01d87c00 0 0x1dc>,
@@ -3699,7 +3699,7 @@ usb_1_qmpphy: phy@88e9000 {
<&gcc GCC_USB3_PHY_PRIM_BCR>;
reset-names = "phy", "common";
- usb_1_ssphy: lanes@88e9200 {
+ usb_1_ssphy: phy@88e9200 {
reg = <0 0x088e9200 0 0x128>,
<0 0x088e9400 0 0x200>,
<0 0x088e9c00 0 0x218>,
@@ -3732,7 +3732,7 @@ usb_2_qmpphy: phy@88eb000 {
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";
- usb_2_ssphy: lane@88eb200 {
+ usb_2_ssphy: phy@88eb200 {
reg = <0 0x088eb200 0 0x128>,
<0 0x088eb400 0 0x1fc>,
<0 0x088eb800 0 0x218>,
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index f347f752d536..74c4acb8598b 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1692,7 +1692,7 @@ ufs_mem_phy: phy@1d87000 {
reset-names = "ufsphy";
status = "disabled";
- ufs_mem_phy_lanes: lanes@1d87400 {
+ ufs_mem_phy_lanes: phy@1d87400 {
reg = <0 0x01d87400 0 0x108>,
<0 0x01d87600 0 0x1e0>,
<0 0x01d87c00 0 0x1dc>,
@@ -3010,7 +3010,7 @@ usb_1_qmpphy: phy@88e9000 {
<&gcc GCC_USB3_PHY_PRIM_BCR>;
reset-names = "phy", "common";
- usb_1_ssphy: lanes@88e9200 {
+ usb_1_ssphy: phy@88e9200 {
reg = <0 0x088e9200 0 0x200>,
<0 0x088e9400 0 0x200>,
<0 0x088e9c00 0 0x218>,
@@ -3043,7 +3043,7 @@ usb_2_qmpphy: phy@88eb000 {
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";
- usb_2_ssphy: lane@88eb200 {
+ usb_2_ssphy: phy@88eb200 {
reg = <0 0x088eb200 0 0x200>,
<0 0x088eb400 0 0x200>,
<0 0x088eb800 0 0x800>,
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 9a95c15c7e8b..bcc948f6f326 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1463,7 +1463,7 @@ pcie0_phy: phy@1c06000 {
status = "disabled";
- pcie0_lane: lanes@1c06200 {
+ pcie0_lane: phy@1c06200 {
reg = <0 0x1c06200 0 0x170>, /* tx */
<0 0x1c06400 0 0x200>, /* rx */
<0 0x1c06800 0 0x1f0>, /* pcs */
@@ -1569,7 +1569,7 @@ pcie1_phy: phy@1c0e000 {
status = "disabled";
- pcie1_lane: lanes@1c0e200 {
+ pcie1_lane: phy@1c0e200 {
reg = <0 0x1c0e200 0 0x170>, /* tx0 */
<0 0x1c0e400 0 0x200>, /* rx0 */
<0 0x1c0ea00 0 0x1f0>, /* pcs */
@@ -1677,7 +1677,7 @@ pcie2_phy: phy@1c16000 {
status = "disabled";
- pcie2_lane: lanes@1c16200 {
+ pcie2_lane: phy@1c16200 {
reg = <0 0x1c16200 0 0x170>, /* tx0 */
<0 0x1c16400 0 0x200>, /* rx0 */
<0 0x1c16a00 0 0x1f0>, /* pcs */
@@ -1756,7 +1756,7 @@ ufs_mem_phy: phy@1d87000 {
reset-names = "ufsphy";
status = "disabled";
- ufs_mem_phy_lanes: lanes@1d87400 {
+ ufs_mem_phy_lanes: phy@1d87400 {
reg = <0 0x01d87400 0 0x108>,
<0 0x01d87600 0 0x1e0>,
<0 0x01d87c00 0 0x1dc>,
@@ -2336,7 +2336,7 @@ usb_2_qmpphy: phy@88eb000 {
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";
- usb_2_ssphy: lanes@88eb200 {
+ usb_2_ssphy: phy@88eb200 {
reg = <0 0x088eb200 0 0x200>,
<0 0x088eb400 0 0x200>,
<0 0x088eb800 0 0x800>;
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index c0a3ea47302f..d6dc55687c2a 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1123,7 +1123,7 @@ ufs_mem_phy: phy@1d87000 {
reset-names = "ufsphy";
status = "disabled";
- ufs_mem_phy_lanes: lanes@1d87400 {
+ ufs_mem_phy_lanes: phy@1d87400 {
reg = <0 0x01d87400 0 0x108>,
<0 0x01d87600 0 0x1e0>,
<0 0x01d87c00 0 0x1dc>,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 020/731] arm64: dts: qcom: sm8150: fix UFS PHY registers
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 019/731] arm64: dts: qcom: Correct QMP PHY child node name Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 021/731] arm64: dts: qcom: sm8250: " Greg Kroah-Hartman
` (721 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Johan Hovold, Bjorn Andersson, Sasha Levin
From: Johan Hovold <johan+linaro@kernel.org>
[ Upstream commit 36a31b3a8d9ba1707a23de8d8dc1ceaef4eda695 ]
The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.
As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.
Fixes: 3834a2e92229 ("arm64: dts: qcom: sm8150: Add ufs nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-2-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 74c4acb8598b..292e40d6162d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1693,11 +1693,11 @@ ufs_mem_phy: phy@1d87000 {
status = "disabled";
ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x108>,
- <0 0x01d87600 0 0x1e0>,
- <0 0x01d87c00 0 0x1dc>,
- <0 0x01d87800 0 0x108>,
- <0 0x01d87a00 0 0x1e0>;
+ reg = <0 0x01d87400 0 0x16c>,
+ <0 0x01d87600 0 0x200>,
+ <0 0x01d87c00 0 0x200>,
+ <0 0x01d87800 0 0x16c>,
+ <0 0x01d87a00 0 0x200>;
#phy-cells = <0>;
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 021/731] arm64: dts: qcom: sm8250: fix UFS PHY registers
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 020/731] arm64: dts: qcom: sm8150: fix UFS PHY registers Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 022/731] arm64: dts: qcom: sm8350: " Greg Kroah-Hartman
` (720 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Johan Hovold, Bjorn Andersson, Sasha Levin
From: Johan Hovold <johan+linaro@kernel.org>
[ Upstream commit 7f8b37dd4e7bf50160529530d9789b846153df71 ]
The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.
As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.
Fixes: b7e2fba06622 ("arm64: dts: qcom: sm8250: Add UFS controller and PHY")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-3-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index bcc948f6f326..e4ba998d0c6e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1757,11 +1757,11 @@ ufs_mem_phy: phy@1d87000 {
status = "disabled";
ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x108>,
- <0 0x01d87600 0 0x1e0>,
- <0 0x01d87c00 0 0x1dc>,
- <0 0x01d87800 0 0x108>,
- <0 0x01d87a00 0 0x1e0>;
+ reg = <0 0x01d87400 0 0x16c>,
+ <0 0x01d87600 0 0x200>,
+ <0 0x01d87c00 0 0x200>,
+ <0 0x01d87800 0 0x16c>,
+ <0 0x01d87a00 0 0x200>;
#phy-cells = <0>;
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 022/731] arm64: dts: qcom: sm8350: fix UFS PHY registers
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 021/731] arm64: dts: qcom: sm8250: " Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 023/731] arm64: dts: qcom: sm8250: drop bogus DP PHY clock Greg Kroah-Hartman
` (719 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Johan Hovold, Bjorn Andersson, Sasha Levin
From: Johan Hovold <johan+linaro@kernel.org>
[ Upstream commit b3c7839b698cc617e97dd2e4f1eeb4adc280fe58 ]
The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.
As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.
Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-4-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index d6dc55687c2a..1ef16975d13a 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1124,11 +1124,11 @@ ufs_mem_phy: phy@1d87000 {
status = "disabled";
ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x108>,
- <0 0x01d87600 0 0x1e0>,
- <0 0x01d87c00 0 0x1dc>,
- <0 0x01d87800 0 0x108>,
- <0 0x01d87a00 0 0x1e0>;
+ reg = <0 0x01d87400 0 0x188>,
+ <0 0x01d87600 0 0x200>,
+ <0 0x01d87c00 0 0x200>,
+ <0 0x01d87800 0 0x188>,
+ <0 0x01d87a00 0 0x200>;
#phy-cells = <0>;
#clock-cells = <0>;
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 023/731] arm64: dts: qcom: sm8250: drop bogus DP PHY clock
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 022/731] arm64: dts: qcom: sm8350: " Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 024/731] soc: qcom: apr: make code more reuseable Greg Kroah-Hartman
` (718 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Johan Hovold, Bjorn Andersson, Sasha Levin
From: Johan Hovold <johan+linaro@kernel.org>
[ Upstream commit bb9f23e46ddcebe1bc68a43a0f7acfc1865a6472 ]
The QMP pipe clock is used by the USB part of the PHY so drop the
corresponding properties from the DP child node.
Fixes: 5aa0d1becd5b ("arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026152511.9661-2-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e4ba998d0c6e..2051eb8ff18e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2312,9 +2312,6 @@ dp_phy: dp-phy@88ea200 {
<0 0x088eaa00 0 0x100>;
#phy-cells = <0>;
#clock-cells = <1>;
- clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_phy_pipe_clk_src";
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 024/731] soc: qcom: apr: make code more reuseable
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 023/731] arm64: dts: qcom: sm8250: drop bogus DP PHY clock Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 025/731] soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index Greg Kroah-Hartman
` (717 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Srinivas Kandagatla,
Pierre-Louis Bossart, Bjorn Andersson, Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit 99139b80c1b3d73026ed8be2de42c52e2976ab64 ]
APR and other packet routers like GPR are pretty much same and
interact with other drivers in similar way.
Ex: GPR ports can be considered as APR services, only difference
is they are allocated dynamically.
Other difference is packet layout, which should not matter
with the apis abstracted. Apart from this the rest of the
functionality is pretty much identical across APR and GPR.
Make the apr code more reusable by abstracting it service level,
rather than device level so that we do not need to write
new drivers for other new packet routers like GPR.
This patch is in preparation to add GPR support to this driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-4-srinivas.kandagatla@linaro.org
Stable-dep-of: 6d7860f5750d ("soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/qcom/apr.c | 129 +++++++++++++++++++++--------------
include/linux/soc/qcom/apr.h | 12 +++-
2 files changed, 90 insertions(+), 51 deletions(-)
diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
index 2e455d9e3d94..5687653fabd5 100644
--- a/drivers/soc/qcom/apr.c
+++ b/drivers/soc/qcom/apr.c
@@ -15,13 +15,18 @@
#include <linux/rpmsg.h>
#include <linux/of.h>
-struct apr {
+enum {
+ PR_TYPE_APR = 0,
+};
+
+struct packet_router {
struct rpmsg_endpoint *ch;
struct device *dev;
spinlock_t svcs_lock;
spinlock_t rx_lock;
struct idr svcs_idr;
int dest_domain_id;
+ int type;
struct pdr_handle *pdr;
struct workqueue_struct *rxwq;
struct work_struct rx_work;
@@ -44,21 +49,21 @@ struct apr_rx_buf {
*/
int apr_send_pkt(struct apr_device *adev, struct apr_pkt *pkt)
{
- struct apr *apr = dev_get_drvdata(adev->dev.parent);
+ struct packet_router *apr = dev_get_drvdata(adev->dev.parent);
struct apr_hdr *hdr;
unsigned long flags;
int ret;
- spin_lock_irqsave(&adev->lock, flags);
+ spin_lock_irqsave(&adev->svc.lock, flags);
hdr = &pkt->hdr;
hdr->src_domain = APR_DOMAIN_APPS;
- hdr->src_svc = adev->svc_id;
+ hdr->src_svc = adev->svc.id;
hdr->dest_domain = adev->domain_id;
- hdr->dest_svc = adev->svc_id;
+ hdr->dest_svc = adev->svc.id;
ret = rpmsg_trysend(apr->ch, pkt, hdr->pkt_size);
- spin_unlock_irqrestore(&adev->lock, flags);
+ spin_unlock_irqrestore(&adev->svc.lock, flags);
return ret ? ret : hdr->pkt_size;
}
@@ -74,7 +79,7 @@ static void apr_dev_release(struct device *dev)
static int apr_callback(struct rpmsg_device *rpdev, void *buf,
int len, void *priv, u32 addr)
{
- struct apr *apr = dev_get_drvdata(&rpdev->dev);
+ struct packet_router *apr = dev_get_drvdata(&rpdev->dev);
struct apr_rx_buf *abuf;
unsigned long flags;
@@ -100,11 +105,11 @@ static int apr_callback(struct rpmsg_device *rpdev, void *buf,
return 0;
}
-
-static int apr_do_rx_callback(struct apr *apr, struct apr_rx_buf *abuf)
+static int apr_do_rx_callback(struct packet_router *apr, struct apr_rx_buf *abuf)
{
uint16_t hdr_size, msg_type, ver, svc_id;
- struct apr_device *svc = NULL;
+ struct pkt_router_svc *svc;
+ struct apr_device *adev;
struct apr_driver *adrv = NULL;
struct apr_resp_pkt resp;
struct apr_hdr *hdr;
@@ -145,12 +150,15 @@ static int apr_do_rx_callback(struct apr *apr, struct apr_rx_buf *abuf)
svc_id = hdr->dest_svc;
spin_lock_irqsave(&apr->svcs_lock, flags);
svc = idr_find(&apr->svcs_idr, svc_id);
- if (svc && svc->dev.driver)
- adrv = to_apr_driver(svc->dev.driver);
+ if (svc && svc->dev->driver) {
+ adev = svc_to_apr_device(svc);
+ adrv = to_apr_driver(adev->dev.driver);
+ }
spin_unlock_irqrestore(&apr->svcs_lock, flags);
- if (!adrv) {
- dev_err(apr->dev, "APR: service is not registered\n");
+ if (!adrv || !adev) {
+ dev_err(apr->dev, "APR: service is not registered (%d)\n",
+ svc_id);
return -EINVAL;
}
@@ -164,20 +172,26 @@ static int apr_do_rx_callback(struct apr *apr, struct apr_rx_buf *abuf)
if (resp.payload_size > 0)
resp.payload = buf + hdr_size;
- adrv->callback(svc, &resp);
+ adrv->callback(adev, &resp);
return 0;
}
static void apr_rxwq(struct work_struct *work)
{
- struct apr *apr = container_of(work, struct apr, rx_work);
+ struct packet_router *apr = container_of(work, struct packet_router, rx_work);
struct apr_rx_buf *abuf, *b;
unsigned long flags;
if (!list_empty(&apr->rx_list)) {
list_for_each_entry_safe(abuf, b, &apr->rx_list, node) {
- apr_do_rx_callback(apr, abuf);
+ switch (apr->type) {
+ case PR_TYPE_APR:
+ apr_do_rx_callback(apr, abuf);
+ break;
+ default:
+ break;
+ }
spin_lock_irqsave(&apr->rx_lock, flags);
list_del(&abuf->node);
spin_unlock_irqrestore(&apr->rx_lock, flags);
@@ -201,7 +215,7 @@ static int apr_device_match(struct device *dev, struct device_driver *drv)
while (id->domain_id != 0 || id->svc_id != 0) {
if (id->domain_id == adev->domain_id &&
- id->svc_id == adev->svc_id)
+ id->svc_id == adev->svc.id)
return 1;
id++;
}
@@ -221,14 +235,14 @@ static void apr_device_remove(struct device *dev)
{
struct apr_device *adev = to_apr_device(dev);
struct apr_driver *adrv;
- struct apr *apr = dev_get_drvdata(adev->dev.parent);
+ struct packet_router *apr = dev_get_drvdata(adev->dev.parent);
if (dev->driver) {
adrv = to_apr_driver(dev->driver);
if (adrv->remove)
adrv->remove(adev);
spin_lock(&apr->svcs_lock);
- idr_remove(&apr->svcs_idr, adev->svc_id);
+ idr_remove(&apr->svcs_idr, adev->svc.id);
spin_unlock(&apr->svcs_lock);
}
}
@@ -255,28 +269,39 @@ struct bus_type aprbus = {
EXPORT_SYMBOL_GPL(aprbus);
static int apr_add_device(struct device *dev, struct device_node *np,
- const struct apr_device_id *id)
+ u32 svc_id, u32 domain_id)
{
- struct apr *apr = dev_get_drvdata(dev);
+ struct packet_router *apr = dev_get_drvdata(dev);
struct apr_device *adev = NULL;
+ struct pkt_router_svc *svc;
int ret;
adev = kzalloc(sizeof(*adev), GFP_KERNEL);
if (!adev)
return -ENOMEM;
- spin_lock_init(&adev->lock);
+ adev->svc_id = svc_id;
+ svc = &adev->svc;
+
+ svc->id = svc_id;
+ svc->pr = apr;
+ svc->priv = adev;
+ svc->dev = dev;
+ spin_lock_init(&svc->lock);
+
+ adev->domain_id = domain_id;
- adev->svc_id = id->svc_id;
- adev->domain_id = id->domain_id;
- adev->version = id->svc_version;
if (np)
snprintf(adev->name, APR_NAME_SIZE, "%pOFn", np);
- else
- strscpy(adev->name, id->name, APR_NAME_SIZE);
- dev_set_name(&adev->dev, "aprsvc:%s:%x:%x", adev->name,
- id->domain_id, id->svc_id);
+ switch (apr->type) {
+ case PR_TYPE_APR:
+ dev_set_name(&adev->dev, "aprsvc:%s:%x:%x", adev->name,
+ domain_id, svc_id);
+ break;
+ default:
+ break;
+ }
adev->dev.bus = &aprbus;
adev->dev.parent = dev;
@@ -285,8 +310,7 @@ static int apr_add_device(struct device *dev, struct device_node *np,
adev->dev.driver = NULL;
spin_lock(&apr->svcs_lock);
- idr_alloc(&apr->svcs_idr, adev, id->svc_id,
- id->svc_id + 1, GFP_ATOMIC);
+ idr_alloc(&apr->svcs_idr, svc, svc_id, svc_id + 1, GFP_ATOMIC);
spin_unlock(&apr->svcs_lock);
of_property_read_string_index(np, "qcom,protection-domain",
@@ -306,7 +330,7 @@ static int apr_add_device(struct device *dev, struct device_node *np,
static int of_apr_add_pd_lookups(struct device *dev)
{
const char *service_name, *service_path;
- struct apr *apr = dev_get_drvdata(dev);
+ struct packet_router *apr = dev_get_drvdata(dev);
struct device_node *node;
struct pdr_service *pds;
int ret;
@@ -338,13 +362,14 @@ static int of_apr_add_pd_lookups(struct device *dev)
static void of_register_apr_devices(struct device *dev, const char *svc_path)
{
- struct apr *apr = dev_get_drvdata(dev);
+ struct packet_router *apr = dev_get_drvdata(dev);
struct device_node *node;
const char *service_path;
int ret;
for_each_child_of_node(dev->of_node, node) {
- struct apr_device_id id = { {0} };
+ u32 svc_id;
+ u32 domain_id;
/*
* This function is called with svc_path NULL during
@@ -374,13 +399,13 @@ static void of_register_apr_devices(struct device *dev, const char *svc_path)
continue;
}
- if (of_property_read_u32(node, "reg", &id.svc_id))
+ if (of_property_read_u32(node, "reg", &svc_id))
continue;
- id.domain_id = apr->dest_domain_id;
+ domain_id = apr->dest_domain_id;
- if (apr_add_device(dev, node, &id))
- dev_err(dev, "Failed to add apr %d svc\n", id.svc_id);
+ if (apr_add_device(dev, node, svc_id, domain_id))
+ dev_err(dev, "Failed to add apr %d svc\n", svc_id);
}
}
@@ -400,7 +425,7 @@ static int apr_remove_device(struct device *dev, void *svc_path)
static void apr_pd_status(int state, char *svc_path, void *priv)
{
- struct apr *apr = (struct apr *)priv;
+ struct packet_router *apr = (struct packet_router *)priv;
switch (state) {
case SERVREG_SERVICE_STATE_UP:
@@ -415,16 +440,20 @@ static void apr_pd_status(int state, char *svc_path, void *priv)
static int apr_probe(struct rpmsg_device *rpdev)
{
struct device *dev = &rpdev->dev;
- struct apr *apr;
+ struct packet_router *apr;
int ret;
apr = devm_kzalloc(dev, sizeof(*apr), GFP_KERNEL);
if (!apr)
return -ENOMEM;
- ret = of_property_read_u32(dev->of_node, "qcom,apr-domain", &apr->dest_domain_id);
+ ret = of_property_read_u32(dev->of_node, "qcom,domain", &apr->dest_domain_id);
+ if (ret) /* try deprecated apr-domain property */
+ ret = of_property_read_u32(dev->of_node, "qcom,apr-domain",
+ &apr->dest_domain_id);
+ apr->type = PR_TYPE_APR;
if (ret) {
- dev_err(dev, "APR Domain ID not specified in DT\n");
+ dev_err(dev, "Domain ID not specified in DT\n");
return ret;
}
@@ -467,7 +496,7 @@ static int apr_probe(struct rpmsg_device *rpdev)
static void apr_remove(struct rpmsg_device *rpdev)
{
- struct apr *apr = dev_get_drvdata(&rpdev->dev);
+ struct packet_router *apr = dev_get_drvdata(&rpdev->dev);
pdr_handle_release(apr->pdr);
device_for_each_child(&rpdev->dev, NULL, apr_remove_device);
@@ -504,20 +533,20 @@ void apr_driver_unregister(struct apr_driver *drv)
}
EXPORT_SYMBOL_GPL(apr_driver_unregister);
-static const struct of_device_id apr_of_match[] = {
+static const struct of_device_id pkt_router_of_match[] = {
{ .compatible = "qcom,apr"},
{ .compatible = "qcom,apr-v2"},
{}
};
-MODULE_DEVICE_TABLE(of, apr_of_match);
+MODULE_DEVICE_TABLE(of, pkt_router_of_match);
-static struct rpmsg_driver apr_driver = {
+static struct rpmsg_driver packet_router_driver = {
.probe = apr_probe,
.remove = apr_remove,
.callback = apr_callback,
.drv = {
.name = "qcom,apr",
- .of_match_table = apr_of_match,
+ .of_match_table = pkt_router_of_match,
},
};
@@ -527,7 +556,7 @@ static int __init apr_init(void)
ret = bus_register(&aprbus);
if (!ret)
- ret = register_rpmsg_driver(&apr_driver);
+ ret = register_rpmsg_driver(&packet_router_driver);
else
bus_unregister(&aprbus);
@@ -537,7 +566,7 @@ static int __init apr_init(void)
static void __exit apr_exit(void)
{
bus_unregister(&aprbus);
- unregister_rpmsg_driver(&apr_driver);
+ unregister_rpmsg_driver(&packet_router_driver);
}
subsys_initcall(apr_init);
diff --git a/include/linux/soc/qcom/apr.h b/include/linux/soc/qcom/apr.h
index 137f9f2ac4c3..7bca213a3f83 100644
--- a/include/linux/soc/qcom/apr.h
+++ b/include/linux/soc/qcom/apr.h
@@ -79,6 +79,15 @@ struct apr_resp_pkt {
#define APR_SVC_MAJOR_VERSION(v) ((v >> 16) & 0xFF)
#define APR_SVC_MINOR_VERSION(v) (v & 0xFF)
+struct packet_router;
+struct pkt_router_svc {
+ struct device *dev;
+ struct packet_router *pr;
+ spinlock_t lock;
+ int id;
+ void *priv;
+};
+
struct apr_device {
struct device dev;
uint16_t svc_id;
@@ -86,11 +95,12 @@ struct apr_device {
uint32_t version;
char name[APR_NAME_SIZE];
const char *service_path;
- spinlock_t lock;
+ struct pkt_router_svc svc;
struct list_head node;
};
#define to_apr_device(d) container_of(d, struct apr_device, dev)
+#define svc_to_apr_device(d) container_of(d, struct apr_device, svc)
struct apr_driver {
int (*probe)(struct apr_device *sl);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 025/731] soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 024/731] soc: qcom: apr: make code more reuseable Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 026/731] arm64: dts: qcom: sm6125: fix SDHCI CQE reg names Greg Kroah-Hartman
` (716 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Bjorn Andersson,
Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit 6d7860f5750d73da2fa1a1f6c9405058a593fa32 ]
As idr_alloc() and of_property_read_string_index() can return negative
numbers, it should be better to check the return value and deal with
the exception.
Therefore, it should be better to use goto statement to stop and return
error.
Fixes: 6adba21eb434 ("soc: qcom: Add APR bus driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107014403.3606-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/qcom/apr.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
index 5687653fabd5..173427bbf916 100644
--- a/drivers/soc/qcom/apr.c
+++ b/drivers/soc/qcom/apr.c
@@ -310,11 +310,19 @@ static int apr_add_device(struct device *dev, struct device_node *np,
adev->dev.driver = NULL;
spin_lock(&apr->svcs_lock);
- idr_alloc(&apr->svcs_idr, svc, svc_id, svc_id + 1, GFP_ATOMIC);
+ ret = idr_alloc(&apr->svcs_idr, svc, svc_id, svc_id + 1, GFP_ATOMIC);
spin_unlock(&apr->svcs_lock);
+ if (ret < 0) {
+ dev_err(dev, "idr_alloc failed: %d\n", ret);
+ goto out;
+ }
- of_property_read_string_index(np, "qcom,protection-domain",
- 1, &adev->service_path);
+ ret = of_property_read_string_index(np, "qcom,protection-domain",
+ 1, &adev->service_path);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read second value of qcom,protection-domain\n");
+ goto out;
+ }
dev_info(dev, "Adding APR dev: %s\n", dev_name(&adev->dev));
@@ -324,6 +332,7 @@ static int apr_add_device(struct device *dev, struct device_node *np,
put_device(&adev->dev);
}
+out:
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 026/731] arm64: dts: qcom: sm6125: fix SDHCI CQE reg names
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 025/731] soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 027/731] arm: dts: spear600: Fix clcd interrupt Greg Kroah-Hartman
` (715 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski, Marijn Suijten,
Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 3de1172624b3c4ca65730bc34333ab493510b3e1 ]
SM6125 comes with SDCC (SDHCI controller) v5, so the second range of
registers is cqhci, not core.
Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # Sony Xperia 10 II
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026163646.37433-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm6125.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index f89af5e35112..dc3bddc54eb6 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -408,7 +408,7 @@ rpm_msg_ram: sram@45f0000 {
sdhc_1: sdhci@4744000 {
compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
- reg-names = "hc", "core";
+ reg-names = "hc", "cqhci";
interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 027/731] arm: dts: spear600: Fix clcd interrupt
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 026/731] arm64: dts: qcom: sm6125: fix SDHCI CQE reg names Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 028/731] soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync Greg Kroah-Hartman
` (714 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kory Maincent, Viresh Kumar,
Arnd Bergmann, Sasha Levin
From: Kory Maincent <kory.maincent@bootlin.com>
[ Upstream commit 0336e2ce34e7a89832b6c214f924eb7bc58940be ]
Interrupt 12 of the Interrupt controller belongs to the SMI controller,
the right one for the display controller is the interrupt 13.
Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/spear600.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index fd41243a0b2c..9d5a04a46b14 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -47,7 +47,7 @@ clcd: clcd@fc200000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0xfc200000 0x1000>;
interrupt-parent = <&vic1>;
- interrupts = <12>;
+ interrupts = <13>;
status = "disabled";
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 028/731] soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 027/731] arm: dts: spear600: Fix clcd interrupt Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 029/731] soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe Greg Kroah-Hartman
` (713 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zeal Robot, Minghao Chi,
Nishanth Menon, Sasha Levin
From: Minghao Chi <chi.minghao@zte.com.cn>
[ Upstream commit 12eeb74925da70eb39d90abead9de9793be3d4c8 ]
Using pm_runtime_resume_and_get is more appropriate for simplifying
code.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220418062955.2557949-1-chi.minghao@zte.com.cn
Stable-dep-of: e961c0f19450 ("soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/ti/knav_qmss_queue.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index 920eca809084..de11f2b8db0f 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -1785,9 +1785,8 @@ static int knav_queue_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&kdev->pdsps);
pm_runtime_enable(&pdev->dev);
- ret = pm_runtime_get_sync(&pdev->dev);
+ ret = pm_runtime_resume_and_get(&pdev->dev);
if (ret < 0) {
- pm_runtime_put_noidle(&pdev->dev);
dev_err(dev, "Failed to enable QMSS\n");
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 029/731] soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 028/731] soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 030/731] soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe Greg Kroah-Hartman
` (712 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Qilong, Nishanth Menon, Sasha Levin
From: Zhang Qilong <zhangqilong3@huawei.com>
[ Upstream commit e961c0f19450fd4a26bd043dd2979990bf12caf6 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
Fixes: 41f93af900a2 ("soc: ti: add Keystone Navigator QMSS driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221108080322.52268-2-zhangqilong3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/ti/knav_qmss_queue.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index de11f2b8db0f..52389859395c 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -1787,6 +1787,7 @@ static int knav_queue_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
ret = pm_runtime_resume_and_get(&pdev->dev);
if (ret < 0) {
+ pm_runtime_disable(&pdev->dev);
dev_err(dev, "Failed to enable QMSS\n");
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 030/731] soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 029/731] soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 031/731] arm64: Treat ESR_ELx as a 64-bit register Greg Kroah-Hartman
` (711 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Qilong, Nishanth Menon, Sasha Levin
From: Zhang Qilong <zhangqilong3@huawei.com>
[ Upstream commit 69460e68eb662064ab4188d4e129ff31c1f23ed9 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
Fixes: 984aa6dbf4ca ("OMAP3: PM: Adding smartreflex driver support.")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221108080322.52268-3-zhangqilong3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/ti/smartreflex.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/soc/ti/smartreflex.c b/drivers/soc/ti/smartreflex.c
index b5b2fa538d5c..4d15587324d4 100644
--- a/drivers/soc/ti/smartreflex.c
+++ b/drivers/soc/ti/smartreflex.c
@@ -931,6 +931,7 @@ static int omap_sr_probe(struct platform_device *pdev)
err_debugfs:
debugfs_remove_recursive(sr_info->dbg_dir);
err_list_del:
+ pm_runtime_disable(&pdev->dev);
list_del(&sr_info->node);
clk_unprepare(sr_info->fck);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 031/731] arm64: Treat ESR_ELx as a 64-bit register
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 030/731] soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 032/731] arm64: mm: kfence: only handle translation faults Greg Kroah-Hartman
` (710 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexandru Elisei, Marc Zyngier,
Catalin Marinas, Sasha Levin
From: Alexandru Elisei <alexandru.elisei@arm.com>
[ Upstream commit 8d56e5c5a99ce1d17d39ce5a8260e42c2a2d7682 ]
In the initial release of the ARM Architecture Reference Manual for
ARMv8-A, the ESR_ELx registers were defined as 32-bit registers. This
changed in 2018 with version D.a (ARM DDI 0487D.a) of the architecture,
when they became 64-bit registers, with bits [63:32] defined as RES0. In
version G.a, a new field was added to ESR_ELx, ISS2, which covers bits
[36:32]. This field is used when the Armv8.7 extension FEAT_LS64 is
implemented.
As a result of the evolution of the register width, Linux stores it as
both a 64-bit value and a 32-bit value, which hasn't affected correctness
so far as Linux only uses the lower 32 bits of the register.
Make the register type consistent and always treat it as 64-bit wide. The
register is redefined as an "unsigned long", which is an unsigned
double-word (64-bit quantity) for the LP64 machine (aapcs64 [1], Table 1,
page 14). The type was chosen because "unsigned int" is the most frequent
type for ESR_ELx and because FAR_ELx, which is used together with ESR_ELx
in exception handling, is also declared as "unsigned long". The 64-bit type
also makes adding support for architectural features that use fields above
bit 31 easier in the future.
The KVM hypervisor will receive a similar update in a subsequent patch.
[1] https://github.com/ARM-software/abi-aa/releases/download/2021Q3/aapcs64.pdf
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425114444.368693-4-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 0bb1fbffc631 ("arm64: mm: kfence: only handle translation faults")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/include/asm/debug-monitors.h | 4 +-
arch/arm64/include/asm/esr.h | 6 +--
arch/arm64/include/asm/exception.h | 28 +++++-----
arch/arm64/include/asm/system_misc.h | 4 +-
arch/arm64/include/asm/traps.h | 12 ++---
arch/arm64/kernel/debug-monitors.c | 12 ++---
arch/arm64/kernel/entry-common.c | 6 +--
arch/arm64/kernel/fpsimd.c | 6 +--
arch/arm64/kernel/hw_breakpoint.c | 4 +-
arch/arm64/kernel/kgdb.c | 6 +--
arch/arm64/kernel/probes/kprobes.c | 4 +-
arch/arm64/kernel/probes/uprobes.c | 4 +-
arch/arm64/kernel/traps.c | 66 +++++++++++------------
arch/arm64/mm/fault.c | 70 ++++++++++++-------------
14 files changed, 116 insertions(+), 116 deletions(-)
diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
index 657c921fd784..e1e10a24519b 100644
--- a/arch/arm64/include/asm/debug-monitors.h
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -76,7 +76,7 @@ struct task_struct;
struct step_hook {
struct list_head node;
- int (*fn)(struct pt_regs *regs, unsigned int esr);
+ int (*fn)(struct pt_regs *regs, unsigned long esr);
};
void register_user_step_hook(struct step_hook *hook);
@@ -87,7 +87,7 @@ void unregister_kernel_step_hook(struct step_hook *hook);
struct break_hook {
struct list_head node;
- int (*fn)(struct pt_regs *regs, unsigned int esr);
+ int (*fn)(struct pt_regs *regs, unsigned long esr);
u16 imm;
u16 mask; /* These bits are ignored when comparing with imm */
};
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index 8f59bbeba7a7..9f91c8906edd 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -324,14 +324,14 @@
#ifndef __ASSEMBLY__
#include <asm/types.h>
-static inline bool esr_is_data_abort(u32 esr)
+static inline bool esr_is_data_abort(unsigned long esr)
{
- const u32 ec = ESR_ELx_EC(esr);
+ const unsigned long ec = ESR_ELx_EC(esr);
return ec == ESR_ELx_EC_DABT_LOW || ec == ESR_ELx_EC_DABT_CUR;
}
-const char *esr_get_class_string(u32 esr);
+const char *esr_get_class_string(unsigned long esr);
#endif /* __ASSEMBLY */
#endif /* __ASM_ESR_H */
diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h
index 339477dca551..0e6535aa78c2 100644
--- a/arch/arm64/include/asm/exception.h
+++ b/arch/arm64/include/asm/exception.h
@@ -19,9 +19,9 @@
#define __exception_irq_entry __kprobes
#endif
-static inline u32 disr_to_esr(u64 disr)
+static inline unsigned long disr_to_esr(u64 disr)
{
- unsigned int esr = ESR_ELx_EC_SERROR << ESR_ELx_EC_SHIFT;
+ unsigned long esr = ESR_ELx_EC_SERROR << ESR_ELx_EC_SHIFT;
if ((disr & DISR_EL1_IDS) == 0)
esr |= (disr & DISR_EL1_ESR_MASK);
@@ -57,23 +57,23 @@ asmlinkage void call_on_irq_stack(struct pt_regs *regs,
void (*func)(struct pt_regs *));
asmlinkage void asm_exit_to_user_mode(struct pt_regs *regs);
-void do_mem_abort(unsigned long far, unsigned int esr, struct pt_regs *regs);
+void do_mem_abort(unsigned long far, unsigned long esr, struct pt_regs *regs);
void do_undefinstr(struct pt_regs *regs);
void do_bti(struct pt_regs *regs);
-void do_debug_exception(unsigned long addr_if_watchpoint, unsigned int esr,
+void do_debug_exception(unsigned long addr_if_watchpoint, unsigned long esr,
struct pt_regs *regs);
-void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs);
-void do_sve_acc(unsigned int esr, struct pt_regs *regs);
-void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs);
-void do_sysinstr(unsigned int esr, struct pt_regs *regs);
-void do_sp_pc_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs);
-void bad_el0_sync(struct pt_regs *regs, int reason, unsigned int esr);
-void do_cp15instr(unsigned int esr, struct pt_regs *regs);
+void do_fpsimd_acc(unsigned long esr, struct pt_regs *regs);
+void do_sve_acc(unsigned long esr, struct pt_regs *regs);
+void do_fpsimd_exc(unsigned long esr, struct pt_regs *regs);
+void do_sysinstr(unsigned long esr, struct pt_regs *regs);
+void do_sp_pc_abort(unsigned long addr, unsigned long esr, struct pt_regs *regs);
+void bad_el0_sync(struct pt_regs *regs, int reason, unsigned long esr);
+void do_cp15instr(unsigned long esr, struct pt_regs *regs);
void do_el0_svc(struct pt_regs *regs);
void do_el0_svc_compat(struct pt_regs *regs);
-void do_ptrauth_fault(struct pt_regs *regs, unsigned int esr);
-void do_serror(struct pt_regs *regs, unsigned int esr);
+void do_ptrauth_fault(struct pt_regs *regs, unsigned long esr);
+void do_serror(struct pt_regs *regs, unsigned long esr);
void do_notify_resume(struct pt_regs *regs, unsigned long thread_flags);
-void panic_bad_stack(struct pt_regs *regs, unsigned int esr, unsigned long far);
+void panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigned long far);
#endif /* __ASM_EXCEPTION_H */
diff --git a/arch/arm64/include/asm/system_misc.h b/arch/arm64/include/asm/system_misc.h
index 305a7157c6a6..0eb7709422e2 100644
--- a/arch/arm64/include/asm/system_misc.h
+++ b/arch/arm64/include/asm/system_misc.h
@@ -23,9 +23,9 @@ void die(const char *msg, struct pt_regs *regs, int err);
struct siginfo;
void arm64_notify_die(const char *str, struct pt_regs *regs,
int signo, int sicode, unsigned long far,
- int err);
+ unsigned long err);
-void hook_debug_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
+void hook_debug_fault_code(int nr, int (*fn)(unsigned long, unsigned long,
struct pt_regs *),
int sig, int code, const char *name);
diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
index 54f32a0675df..6e5826470bea 100644
--- a/arch/arm64/include/asm/traps.h
+++ b/arch/arm64/include/asm/traps.h
@@ -24,7 +24,7 @@ struct undef_hook {
void register_undef_hook(struct undef_hook *hook);
void unregister_undef_hook(struct undef_hook *hook);
-void force_signal_inject(int signal, int code, unsigned long address, unsigned int err);
+void force_signal_inject(int signal, int code, unsigned long address, unsigned long err);
void arm64_notify_segfault(unsigned long addr);
void arm64_force_sig_fault(int signo, int code, unsigned long far, const char *str);
void arm64_force_sig_mceerr(int code, unsigned long far, short lsb, const char *str);
@@ -57,7 +57,7 @@ static inline int in_entry_text(unsigned long ptr)
* errors share the same encoding as an all-zeros encoding from a CPU that
* doesn't support RAS.
*/
-static inline bool arm64_is_ras_serror(u32 esr)
+static inline bool arm64_is_ras_serror(unsigned long esr)
{
WARN_ON(preemptible());
@@ -77,9 +77,9 @@ static inline bool arm64_is_ras_serror(u32 esr)
* We treat them as Uncontainable.
* Non-RAS SError's are reported as Uncontained/Uncategorized.
*/
-static inline u32 arm64_ras_serror_get_severity(u32 esr)
+static inline unsigned long arm64_ras_serror_get_severity(unsigned long esr)
{
- u32 aet = esr & ESR_ELx_AET;
+ unsigned long aet = esr & ESR_ELx_AET;
if (!arm64_is_ras_serror(esr)) {
/* Not a RAS error, we can't interpret the ESR. */
@@ -98,6 +98,6 @@ static inline u32 arm64_ras_serror_get_severity(u32 esr)
return aet;
}
-bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned int esr);
-void __noreturn arm64_serror_panic(struct pt_regs *regs, u32 esr);
+bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned long esr);
+void __noreturn arm64_serror_panic(struct pt_regs *regs, unsigned long esr);
#endif
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index 4f3661eeb7ec..bf9fe71589bc 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -202,7 +202,7 @@ void unregister_kernel_step_hook(struct step_hook *hook)
* So we call all the registered handlers, until the right handler is
* found which returns zero.
*/
-static int call_step_hook(struct pt_regs *regs, unsigned int esr)
+static int call_step_hook(struct pt_regs *regs, unsigned long esr)
{
struct step_hook *hook;
struct list_head *list;
@@ -238,7 +238,7 @@ static void send_user_sigtrap(int si_code)
"User debug trap");
}
-static int single_step_handler(unsigned long unused, unsigned int esr,
+static int single_step_handler(unsigned long unused, unsigned long esr,
struct pt_regs *regs)
{
bool handler_found = false;
@@ -299,11 +299,11 @@ void unregister_kernel_break_hook(struct break_hook *hook)
unregister_debug_hook(&hook->node);
}
-static int call_break_hook(struct pt_regs *regs, unsigned int esr)
+static int call_break_hook(struct pt_regs *regs, unsigned long esr)
{
struct break_hook *hook;
struct list_head *list;
- int (*fn)(struct pt_regs *regs, unsigned int esr) = NULL;
+ int (*fn)(struct pt_regs *regs, unsigned long esr) = NULL;
list = user_mode(regs) ? &user_break_hook : &kernel_break_hook;
@@ -312,7 +312,7 @@ static int call_break_hook(struct pt_regs *regs, unsigned int esr)
* entirely not preemptible, and we can use rcu list safely here.
*/
list_for_each_entry_rcu(hook, list, node) {
- unsigned int comment = esr & ESR_ELx_BRK64_ISS_COMMENT_MASK;
+ unsigned long comment = esr & ESR_ELx_BRK64_ISS_COMMENT_MASK;
if ((comment & ~hook->mask) == hook->imm)
fn = hook->fn;
@@ -322,7 +322,7 @@ static int call_break_hook(struct pt_regs *regs, unsigned int esr)
}
NOKPROBE_SYMBOL(call_break_hook);
-static int brk_handler(unsigned long unused, unsigned int esr,
+static int brk_handler(unsigned long unused, unsigned long esr,
struct pt_regs *regs)
{
if (call_break_hook(regs, esr) == DBG_HOOK_HANDLED)
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index 8ecca795aca0..fc91dad1579a 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -273,13 +273,13 @@ extern void (*handle_arch_irq)(struct pt_regs *);
extern void (*handle_arch_fiq)(struct pt_regs *);
static void noinstr __panic_unhandled(struct pt_regs *regs, const char *vector,
- unsigned int esr)
+ unsigned long esr)
{
arm64_enter_nmi(regs);
console_verbose();
- pr_crit("Unhandled %s exception on CPU%d, ESR 0x%08x -- %s\n",
+ pr_crit("Unhandled %s exception on CPU%d, ESR 0x%016lx -- %s\n",
vector, smp_processor_id(), esr,
esr_get_class_string(esr));
@@ -796,7 +796,7 @@ UNHANDLED(el0t, 32, error)
#ifdef CONFIG_VMAP_STACK
asmlinkage void noinstr handle_bad_stack(struct pt_regs *regs)
{
- unsigned int esr = read_sysreg(esr_el1);
+ unsigned long esr = read_sysreg(esr_el1);
unsigned long far = read_sysreg(far_el1);
arm64_enter_nmi(regs);
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index ff4962750b3d..7a3fcf21b18a 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -930,7 +930,7 @@ void fpsimd_release_task(struct task_struct *dead_task)
* would have disabled the SVE access trap for userspace during
* ret_to_user, making an SVE access trap impossible in that case.
*/
-void do_sve_acc(unsigned int esr, struct pt_regs *regs)
+void do_sve_acc(unsigned long esr, struct pt_regs *regs)
{
/* Even if we chose not to use SVE, the hardware could still trap: */
if (unlikely(!system_supports_sve()) || WARN_ON(is_compat_task())) {
@@ -972,7 +972,7 @@ void do_sve_acc(unsigned int esr, struct pt_regs *regs)
/*
* Trapped FP/ASIMD access.
*/
-void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
+void do_fpsimd_acc(unsigned long esr, struct pt_regs *regs)
{
/* TODO: implement lazy context saving/restoring */
WARN_ON(1);
@@ -981,7 +981,7 @@ void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
/*
* Raise a SIGFPE for the current process.
*/
-void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs)
+void do_fpsimd_exc(unsigned long esr, struct pt_regs *regs)
{
unsigned int si_code = FPE_FLTUNK;
diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
index 712e97c03e54..2a7f21314cde 100644
--- a/arch/arm64/kernel/hw_breakpoint.c
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -617,7 +617,7 @@ NOKPROBE_SYMBOL(toggle_bp_registers);
/*
* Debug exception handlers.
*/
-static int breakpoint_handler(unsigned long unused, unsigned int esr,
+static int breakpoint_handler(unsigned long unused, unsigned long esr,
struct pt_regs *regs)
{
int i, step = 0, *kernel_step;
@@ -751,7 +751,7 @@ static int watchpoint_report(struct perf_event *wp, unsigned long addr,
return step;
}
-static int watchpoint_handler(unsigned long addr, unsigned int esr,
+static int watchpoint_handler(unsigned long addr, unsigned long esr,
struct pt_regs *regs)
{
int i, step = 0, *kernel_step, access, closest_match = 0;
diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c
index 2aede780fb80..cda9c1e9864f 100644
--- a/arch/arm64/kernel/kgdb.c
+++ b/arch/arm64/kernel/kgdb.c
@@ -232,14 +232,14 @@ int kgdb_arch_handle_exception(int exception_vector, int signo,
return err;
}
-static int kgdb_brk_fn(struct pt_regs *regs, unsigned int esr)
+static int kgdb_brk_fn(struct pt_regs *regs, unsigned long esr)
{
kgdb_handle_exception(1, SIGTRAP, 0, regs);
return DBG_HOOK_HANDLED;
}
NOKPROBE_SYMBOL(kgdb_brk_fn)
-static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int esr)
+static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned long esr)
{
compiled_break = 1;
kgdb_handle_exception(1, SIGTRAP, 0, regs);
@@ -248,7 +248,7 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int esr)
}
NOKPROBE_SYMBOL(kgdb_compiled_brk_fn);
-static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned int esr)
+static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned long esr)
{
if (!kgdb_single_step)
return DBG_HOOK_ERROR;
diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index 6dbcc89f6662..b7404dba0d62 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -332,7 +332,7 @@ static void __kprobes kprobe_handler(struct pt_regs *regs)
}
static int __kprobes
-kprobe_breakpoint_ss_handler(struct pt_regs *regs, unsigned int esr)
+kprobe_breakpoint_ss_handler(struct pt_regs *regs, unsigned long esr)
{
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
unsigned long addr = instruction_pointer(regs);
@@ -356,7 +356,7 @@ static struct break_hook kprobes_break_ss_hook = {
};
static int __kprobes
-kprobe_breakpoint_handler(struct pt_regs *regs, unsigned int esr)
+kprobe_breakpoint_handler(struct pt_regs *regs, unsigned long esr)
{
kprobe_handler(regs);
return DBG_HOOK_HANDLED;
diff --git a/arch/arm64/kernel/probes/uprobes.c b/arch/arm64/kernel/probes/uprobes.c
index 9be668f3f034..d49aef2657cd 100644
--- a/arch/arm64/kernel/probes/uprobes.c
+++ b/arch/arm64/kernel/probes/uprobes.c
@@ -166,7 +166,7 @@ int arch_uprobe_exception_notify(struct notifier_block *self,
}
static int uprobe_breakpoint_handler(struct pt_regs *regs,
- unsigned int esr)
+ unsigned long esr)
{
if (uprobe_pre_sstep_notifier(regs))
return DBG_HOOK_HANDLED;
@@ -175,7 +175,7 @@ static int uprobe_breakpoint_handler(struct pt_regs *regs,
}
static int uprobe_single_step_handler(struct pt_regs *regs,
- unsigned int esr)
+ unsigned long esr)
{
struct uprobe_task *utask = current->utask;
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index fe0cd0568813..f859cc870d5b 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -243,7 +243,7 @@ static void arm64_show_signal(int signo, const char *str)
static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
DEFAULT_RATELIMIT_BURST);
struct task_struct *tsk = current;
- unsigned int esr = tsk->thread.fault_code;
+ unsigned long esr = tsk->thread.fault_code;
struct pt_regs *regs = task_pt_regs(tsk);
/* Leave if the signal won't be shown */
@@ -254,7 +254,7 @@ static void arm64_show_signal(int signo, const char *str)
pr_info("%s[%d]: unhandled exception: ", tsk->comm, task_pid_nr(tsk));
if (esr)
- pr_cont("%s, ESR 0x%08x, ", esr_get_class_string(esr), esr);
+ pr_cont("%s, ESR 0x%016lx, ", esr_get_class_string(esr), esr);
pr_cont("%s", str);
print_vma_addr(KERN_CONT " in ", regs->pc);
@@ -288,7 +288,7 @@ void arm64_force_sig_ptrace_errno_trap(int errno, unsigned long far,
void arm64_notify_die(const char *str, struct pt_regs *regs,
int signo, int sicode, unsigned long far,
- int err)
+ unsigned long err)
{
if (user_mode(regs)) {
WARN_ON(regs != current_pt_regs());
@@ -440,7 +440,7 @@ static int call_undef_hook(struct pt_regs *regs)
return fn ? fn(regs, instr) : 1;
}
-void force_signal_inject(int signal, int code, unsigned long address, unsigned int err)
+void force_signal_inject(int signal, int code, unsigned long address, unsigned long err)
{
const char *desc;
struct pt_regs *regs = current_pt_regs();
@@ -507,7 +507,7 @@ void do_bti(struct pt_regs *regs)
}
NOKPROBE_SYMBOL(do_bti);
-void do_ptrauth_fault(struct pt_regs *regs, unsigned int esr)
+void do_ptrauth_fault(struct pt_regs *regs, unsigned long esr)
{
/*
* Unexpected FPAC exception or pointer authentication failure in
@@ -538,7 +538,7 @@ NOKPROBE_SYMBOL(do_ptrauth_fault);
uaccess_ttbr0_disable(); \
}
-static void user_cache_maint_handler(unsigned int esr, struct pt_regs *regs)
+static void user_cache_maint_handler(unsigned long esr, struct pt_regs *regs)
{
unsigned long tagged_address, address;
int rt = ESR_ELx_SYS64_ISS_RT(esr);
@@ -578,7 +578,7 @@ static void user_cache_maint_handler(unsigned int esr, struct pt_regs *regs)
arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
}
-static void ctr_read_handler(unsigned int esr, struct pt_regs *regs)
+static void ctr_read_handler(unsigned long esr, struct pt_regs *regs)
{
int rt = ESR_ELx_SYS64_ISS_RT(esr);
unsigned long val = arm64_ftr_reg_user_value(&arm64_ftr_reg_ctrel0);
@@ -597,7 +597,7 @@ static void ctr_read_handler(unsigned int esr, struct pt_regs *regs)
arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
}
-static void cntvct_read_handler(unsigned int esr, struct pt_regs *regs)
+static void cntvct_read_handler(unsigned long esr, struct pt_regs *regs)
{
int rt = ESR_ELx_SYS64_ISS_RT(esr);
@@ -605,7 +605,7 @@ static void cntvct_read_handler(unsigned int esr, struct pt_regs *regs)
arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
}
-static void cntfrq_read_handler(unsigned int esr, struct pt_regs *regs)
+static void cntfrq_read_handler(unsigned long esr, struct pt_regs *regs)
{
int rt = ESR_ELx_SYS64_ISS_RT(esr);
@@ -613,7 +613,7 @@ static void cntfrq_read_handler(unsigned int esr, struct pt_regs *regs)
arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
}
-static void mrs_handler(unsigned int esr, struct pt_regs *regs)
+static void mrs_handler(unsigned long esr, struct pt_regs *regs)
{
u32 sysreg, rt;
@@ -624,15 +624,15 @@ static void mrs_handler(unsigned int esr, struct pt_regs *regs)
force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
}
-static void wfi_handler(unsigned int esr, struct pt_regs *regs)
+static void wfi_handler(unsigned long esr, struct pt_regs *regs)
{
arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
}
struct sys64_hook {
- unsigned int esr_mask;
- unsigned int esr_val;
- void (*handler)(unsigned int esr, struct pt_regs *regs);
+ unsigned long esr_mask;
+ unsigned long esr_val;
+ void (*handler)(unsigned long esr, struct pt_regs *regs);
};
static const struct sys64_hook sys64_hooks[] = {
@@ -675,7 +675,7 @@ static const struct sys64_hook sys64_hooks[] = {
};
#ifdef CONFIG_COMPAT
-static bool cp15_cond_valid(unsigned int esr, struct pt_regs *regs)
+static bool cp15_cond_valid(unsigned long esr, struct pt_regs *regs)
{
int cond;
@@ -695,7 +695,7 @@ static bool cp15_cond_valid(unsigned int esr, struct pt_regs *regs)
return aarch32_opcode_cond_checks[cond](regs->pstate);
}
-static void compat_cntfrq_read_handler(unsigned int esr, struct pt_regs *regs)
+static void compat_cntfrq_read_handler(unsigned long esr, struct pt_regs *regs)
{
int reg = (esr & ESR_ELx_CP15_32_ISS_RT_MASK) >> ESR_ELx_CP15_32_ISS_RT_SHIFT;
@@ -712,7 +712,7 @@ static const struct sys64_hook cp15_32_hooks[] = {
{},
};
-static void compat_cntvct_read_handler(unsigned int esr, struct pt_regs *regs)
+static void compat_cntvct_read_handler(unsigned long esr, struct pt_regs *regs)
{
int rt = (esr & ESR_ELx_CP15_64_ISS_RT_MASK) >> ESR_ELx_CP15_64_ISS_RT_SHIFT;
int rt2 = (esr & ESR_ELx_CP15_64_ISS_RT2_MASK) >> ESR_ELx_CP15_64_ISS_RT2_SHIFT;
@@ -732,7 +732,7 @@ static const struct sys64_hook cp15_64_hooks[] = {
{},
};
-void do_cp15instr(unsigned int esr, struct pt_regs *regs)
+void do_cp15instr(unsigned long esr, struct pt_regs *regs)
{
const struct sys64_hook *hook, *hook_base;
@@ -773,7 +773,7 @@ void do_cp15instr(unsigned int esr, struct pt_regs *regs)
NOKPROBE_SYMBOL(do_cp15instr);
#endif
-void do_sysinstr(unsigned int esr, struct pt_regs *regs)
+void do_sysinstr(unsigned long esr, struct pt_regs *regs)
{
const struct sys64_hook *hook;
@@ -837,7 +837,7 @@ static const char *esr_class_str[] = {
[ESR_ELx_EC_BRK64] = "BRK (AArch64)",
};
-const char *esr_get_class_string(u32 esr)
+const char *esr_get_class_string(unsigned long esr)
{
return esr_class_str[ESR_ELx_EC(esr)];
}
@@ -846,7 +846,7 @@ const char *esr_get_class_string(u32 esr)
* bad_el0_sync handles unexpected, but potentially recoverable synchronous
* exceptions taken from EL0.
*/
-void bad_el0_sync(struct pt_regs *regs, int reason, unsigned int esr)
+void bad_el0_sync(struct pt_regs *regs, int reason, unsigned long esr)
{
unsigned long pc = instruction_pointer(regs);
@@ -862,7 +862,7 @@ void bad_el0_sync(struct pt_regs *regs, int reason, unsigned int esr)
DEFINE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack)
__aligned(16);
-void panic_bad_stack(struct pt_regs *regs, unsigned int esr, unsigned long far)
+void panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigned long far)
{
unsigned long tsk_stk = (unsigned long)current->stack;
unsigned long irq_stk = (unsigned long)this_cpu_read(irq_stack_ptr);
@@ -871,7 +871,7 @@ void panic_bad_stack(struct pt_regs *regs, unsigned int esr, unsigned long far)
console_verbose();
pr_emerg("Insufficient stack space to handle exception!");
- pr_emerg("ESR: 0x%08x -- %s\n", esr, esr_get_class_string(esr));
+ pr_emerg("ESR: 0x%016lx -- %s\n", esr, esr_get_class_string(esr));
pr_emerg("FAR: 0x%016lx\n", far);
pr_emerg("Task stack: [0x%016lx..0x%016lx]\n",
@@ -892,11 +892,11 @@ void panic_bad_stack(struct pt_regs *regs, unsigned int esr, unsigned long far)
}
#endif
-void __noreturn arm64_serror_panic(struct pt_regs *regs, u32 esr)
+void __noreturn arm64_serror_panic(struct pt_regs *regs, unsigned long esr)
{
console_verbose();
- pr_crit("SError Interrupt on CPU%d, code 0x%08x -- %s\n",
+ pr_crit("SError Interrupt on CPU%d, code 0x%016lx -- %s\n",
smp_processor_id(), esr, esr_get_class_string(esr));
if (regs)
__show_regs(regs);
@@ -907,9 +907,9 @@ void __noreturn arm64_serror_panic(struct pt_regs *regs, u32 esr)
unreachable();
}
-bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned int esr)
+bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned long esr)
{
- u32 aet = arm64_ras_serror_get_severity(esr);
+ unsigned long aet = arm64_ras_serror_get_severity(esr);
switch (aet) {
case ESR_ELx_AET_CE: /* corrected error */
@@ -939,7 +939,7 @@ bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned int esr)
}
}
-void do_serror(struct pt_regs *regs, unsigned int esr)
+void do_serror(struct pt_regs *regs, unsigned long esr)
{
/* non-RAS errors are not containable */
if (!arm64_is_ras_serror(esr) || arm64_is_fatal_ras_serror(regs, esr))
@@ -960,7 +960,7 @@ int is_valid_bugaddr(unsigned long addr)
return 1;
}
-static int bug_handler(struct pt_regs *regs, unsigned int esr)
+static int bug_handler(struct pt_regs *regs, unsigned long esr)
{
switch (report_bug(regs->pc, regs)) {
case BUG_TRAP_TYPE_BUG:
@@ -985,7 +985,7 @@ static struct break_hook bug_break_hook = {
.imm = BUG_BRK_IMM,
};
-static int reserved_fault_handler(struct pt_regs *regs, unsigned int esr)
+static int reserved_fault_handler(struct pt_regs *regs, unsigned long esr)
{
pr_err("%s generated an invalid instruction at %pS!\n",
"Kernel text patching",
@@ -1007,7 +1007,7 @@ static struct break_hook fault_break_hook = {
#define KASAN_ESR_SIZE_MASK 0x0f
#define KASAN_ESR_SIZE(esr) (1 << ((esr) & KASAN_ESR_SIZE_MASK))
-static int kasan_handler(struct pt_regs *regs, unsigned int esr)
+static int kasan_handler(struct pt_regs *regs, unsigned long esr)
{
bool recover = esr & KASAN_ESR_RECOVER;
bool write = esr & KASAN_ESR_WRITE;
@@ -1050,11 +1050,11 @@ static struct break_hook kasan_break_hook = {
* Initial handler for AArch64 BRK exceptions
* This handler only used until debug_traps_init().
*/
-int __init early_brk64(unsigned long addr, unsigned int esr,
+int __init early_brk64(unsigned long addr, unsigned long esr,
struct pt_regs *regs)
{
#ifdef CONFIG_KASAN_SW_TAGS
- unsigned int comment = esr & ESR_ELx_BRK64_ISS_COMMENT_MASK;
+ unsigned long comment = esr & ESR_ELx_BRK64_ISS_COMMENT_MASK;
if ((comment & ~KASAN_BRK_MASK) == KASAN_BRK_IMM)
return kasan_handler(regs, esr) != DBG_HOOK_HANDLED;
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 9ae24e3b72be..e38e7dc0f8f5 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -43,7 +43,7 @@
#include <asm/traps.h>
struct fault_info {
- int (*fn)(unsigned long far, unsigned int esr,
+ int (*fn)(unsigned long far, unsigned long esr,
struct pt_regs *regs);
int sig;
int code;
@@ -53,17 +53,17 @@ struct fault_info {
static const struct fault_info fault_info[];
static struct fault_info debug_fault_info[];
-static inline const struct fault_info *esr_to_fault_info(unsigned int esr)
+static inline const struct fault_info *esr_to_fault_info(unsigned long esr)
{
return fault_info + (esr & ESR_ELx_FSC);
}
-static inline const struct fault_info *esr_to_debug_fault_info(unsigned int esr)
+static inline const struct fault_info *esr_to_debug_fault_info(unsigned long esr)
{
return debug_fault_info + DBG_ESR_EVT(esr);
}
-static void data_abort_decode(unsigned int esr)
+static void data_abort_decode(unsigned long esr)
{
pr_alert("Data abort info:\n");
@@ -85,11 +85,11 @@ static void data_abort_decode(unsigned int esr)
(esr & ESR_ELx_WNR) >> ESR_ELx_WNR_SHIFT);
}
-static void mem_abort_decode(unsigned int esr)
+static void mem_abort_decode(unsigned long esr)
{
pr_alert("Mem abort info:\n");
- pr_alert(" ESR = 0x%08x\n", esr);
+ pr_alert(" ESR = 0x%016lx\n", esr);
pr_alert(" EC = 0x%02lx: %s, IL = %u bits\n",
ESR_ELx_EC(esr), esr_get_class_string(esr),
(esr & ESR_ELx_IL) ? 32 : 16);
@@ -99,7 +99,7 @@ static void mem_abort_decode(unsigned int esr)
pr_alert(" EA = %lu, S1PTW = %lu\n",
(esr & ESR_ELx_EA) >> ESR_ELx_EA_SHIFT,
(esr & ESR_ELx_S1PTW) >> ESR_ELx_S1PTW_SHIFT);
- pr_alert(" FSC = 0x%02x: %s\n", (esr & ESR_ELx_FSC),
+ pr_alert(" FSC = 0x%02lx: %s\n", (esr & ESR_ELx_FSC),
esr_to_fault_info(esr)->name);
if (esr_is_data_abort(esr))
@@ -229,20 +229,20 @@ int ptep_set_access_flags(struct vm_area_struct *vma,
return 1;
}
-static bool is_el1_instruction_abort(unsigned int esr)
+static bool is_el1_instruction_abort(unsigned long esr)
{
return ESR_ELx_EC(esr) == ESR_ELx_EC_IABT_CUR;
}
-static bool is_el1_data_abort(unsigned int esr)
+static bool is_el1_data_abort(unsigned long esr)
{
return ESR_ELx_EC(esr) == ESR_ELx_EC_DABT_CUR;
}
-static inline bool is_el1_permission_fault(unsigned long addr, unsigned int esr,
+static inline bool is_el1_permission_fault(unsigned long addr, unsigned long esr,
struct pt_regs *regs)
{
- unsigned int fsc_type = esr & ESR_ELx_FSC_TYPE;
+ unsigned long fsc_type = esr & ESR_ELx_FSC_TYPE;
if (!is_el1_data_abort(esr) && !is_el1_instruction_abort(esr))
return false;
@@ -258,7 +258,7 @@ static inline bool is_el1_permission_fault(unsigned long addr, unsigned int esr,
}
static bool __kprobes is_spurious_el1_translation_fault(unsigned long addr,
- unsigned int esr,
+ unsigned long esr,
struct pt_regs *regs)
{
unsigned long flags;
@@ -290,7 +290,7 @@ static bool __kprobes is_spurious_el1_translation_fault(unsigned long addr,
}
static void die_kernel_fault(const char *msg, unsigned long addr,
- unsigned int esr, struct pt_regs *regs)
+ unsigned long esr, struct pt_regs *regs)
{
bust_spinlocks(1);
@@ -306,7 +306,7 @@ static void die_kernel_fault(const char *msg, unsigned long addr,
}
#ifdef CONFIG_KASAN_HW_TAGS
-static void report_tag_fault(unsigned long addr, unsigned int esr,
+static void report_tag_fault(unsigned long addr, unsigned long esr,
struct pt_regs *regs)
{
/*
@@ -318,11 +318,11 @@ static void report_tag_fault(unsigned long addr, unsigned int esr,
}
#else
/* Tag faults aren't enabled without CONFIG_KASAN_HW_TAGS. */
-static inline void report_tag_fault(unsigned long addr, unsigned int esr,
+static inline void report_tag_fault(unsigned long addr, unsigned long esr,
struct pt_regs *regs) { }
#endif
-static void do_tag_recovery(unsigned long addr, unsigned int esr,
+static void do_tag_recovery(unsigned long addr, unsigned long esr,
struct pt_regs *regs)
{
@@ -337,9 +337,9 @@ static void do_tag_recovery(unsigned long addr, unsigned int esr,
isb();
}
-static bool is_el1_mte_sync_tag_check_fault(unsigned int esr)
+static bool is_el1_mte_sync_tag_check_fault(unsigned long esr)
{
- unsigned int fsc = esr & ESR_ELx_FSC;
+ unsigned long fsc = esr & ESR_ELx_FSC;
if (!is_el1_data_abort(esr))
return false;
@@ -350,7 +350,7 @@ static bool is_el1_mte_sync_tag_check_fault(unsigned int esr)
return false;
}
-static void __do_kernel_fault(unsigned long addr, unsigned int esr,
+static void __do_kernel_fault(unsigned long addr, unsigned long esr,
struct pt_regs *regs)
{
const char *msg;
@@ -391,7 +391,7 @@ static void __do_kernel_fault(unsigned long addr, unsigned int esr,
die_kernel_fault(msg, addr, esr, regs);
}
-static void set_thread_esr(unsigned long address, unsigned int esr)
+static void set_thread_esr(unsigned long address, unsigned long esr)
{
current->thread.fault_address = address;
@@ -439,7 +439,7 @@ static void set_thread_esr(unsigned long address, unsigned int esr)
* exception level). Fail safe by not providing an ESR
* context record at all.
*/
- WARN(1, "ESR 0x%x is not DABT or IABT from EL0\n", esr);
+ WARN(1, "ESR 0x%lx is not DABT or IABT from EL0\n", esr);
esr = 0;
break;
}
@@ -448,7 +448,7 @@ static void set_thread_esr(unsigned long address, unsigned int esr)
current->thread.fault_code = esr;
}
-static void do_bad_area(unsigned long far, unsigned int esr,
+static void do_bad_area(unsigned long far, unsigned long esr,
struct pt_regs *regs)
{
unsigned long addr = untagged_addr(far);
@@ -499,7 +499,7 @@ static vm_fault_t __do_page_fault(struct mm_struct *mm, unsigned long addr,
return handle_mm_fault(vma, addr, mm_flags, regs);
}
-static bool is_el0_instruction_abort(unsigned int esr)
+static bool is_el0_instruction_abort(unsigned long esr)
{
return ESR_ELx_EC(esr) == ESR_ELx_EC_IABT_LOW;
}
@@ -508,12 +508,12 @@ static bool is_el0_instruction_abort(unsigned int esr)
* Note: not valid for EL1 DC IVAC, but we never use that such that it
* should fault. EL0 cannot issue DC IVAC (undef).
*/
-static bool is_write_abort(unsigned int esr)
+static bool is_write_abort(unsigned long esr)
{
return (esr & ESR_ELx_WNR) && !(esr & ESR_ELx_CM);
}
-static int __kprobes do_page_fault(unsigned long far, unsigned int esr,
+static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
struct pt_regs *regs)
{
const struct fault_info *inf;
@@ -671,7 +671,7 @@ static int __kprobes do_page_fault(unsigned long far, unsigned int esr,
}
static int __kprobes do_translation_fault(unsigned long far,
- unsigned int esr,
+ unsigned long esr,
struct pt_regs *regs)
{
unsigned long addr = untagged_addr(far);
@@ -683,19 +683,19 @@ static int __kprobes do_translation_fault(unsigned long far,
return 0;
}
-static int do_alignment_fault(unsigned long far, unsigned int esr,
+static int do_alignment_fault(unsigned long far, unsigned long esr,
struct pt_regs *regs)
{
do_bad_area(far, esr, regs);
return 0;
}
-static int do_bad(unsigned long far, unsigned int esr, struct pt_regs *regs)
+static int do_bad(unsigned long far, unsigned long esr, struct pt_regs *regs)
{
return 1; /* "fault" */
}
-static int do_sea(unsigned long far, unsigned int esr, struct pt_regs *regs)
+static int do_sea(unsigned long far, unsigned long esr, struct pt_regs *regs)
{
const struct fault_info *inf;
unsigned long siaddr;
@@ -725,7 +725,7 @@ static int do_sea(unsigned long far, unsigned int esr, struct pt_regs *regs)
return 0;
}
-static int do_tag_check_fault(unsigned long far, unsigned int esr,
+static int do_tag_check_fault(unsigned long far, unsigned long esr,
struct pt_regs *regs)
{
/*
@@ -805,7 +805,7 @@ static const struct fault_info fault_info[] = {
{ do_bad, SIGKILL, SI_KERNEL, "unknown 63" },
};
-void do_mem_abort(unsigned long far, unsigned int esr, struct pt_regs *regs)
+void do_mem_abort(unsigned long far, unsigned long esr, struct pt_regs *regs)
{
const struct fault_info *inf = esr_to_fault_info(esr);
unsigned long addr = untagged_addr(far);
@@ -828,14 +828,14 @@ void do_mem_abort(unsigned long far, unsigned int esr, struct pt_regs *regs)
}
NOKPROBE_SYMBOL(do_mem_abort);
-void do_sp_pc_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs)
+void do_sp_pc_abort(unsigned long addr, unsigned long esr, struct pt_regs *regs)
{
arm64_notify_die("SP/PC alignment exception", regs, SIGBUS, BUS_ADRALN,
addr, esr);
}
NOKPROBE_SYMBOL(do_sp_pc_abort);
-int __init early_brk64(unsigned long addr, unsigned int esr,
+int __init early_brk64(unsigned long addr, unsigned long esr,
struct pt_regs *regs);
/*
@@ -855,7 +855,7 @@ static struct fault_info __refdata debug_fault_info[] = {
};
void __init hook_debug_fault_code(int nr,
- int (*fn)(unsigned long, unsigned int, struct pt_regs *),
+ int (*fn)(unsigned long, unsigned long, struct pt_regs *),
int sig, int code, const char *name)
{
BUG_ON(nr < 0 || nr >= ARRAY_SIZE(debug_fault_info));
@@ -888,7 +888,7 @@ static void debug_exception_exit(struct pt_regs *regs)
}
NOKPROBE_SYMBOL(debug_exception_exit);
-void do_debug_exception(unsigned long addr_if_watchpoint, unsigned int esr,
+void do_debug_exception(unsigned long addr_if_watchpoint, unsigned long esr,
struct pt_regs *regs)
{
const struct fault_info *inf = esr_to_debug_fault_info(esr);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 032/731] arm64: mm: kfence: only handle translation faults
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 031/731] arm64: Treat ESR_ELx as a 64-bit register Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 033/731] perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init() Greg Kroah-Hartman
` (709 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mark Rutland, Alexander Potapenko,
Catalin Marinas, Marco Elver, Will Deacon, Sasha Levin
From: Mark Rutland <mark.rutland@arm.com>
[ Upstream commit 0bb1fbffc631064db567ccaeb9ed6b6df6342b66 ]
Alexander noted that KFENCE only expects to handle faults from invalid page
table entries (i.e. translation faults), but arm64's fault handling logic will
call kfence_handle_page_fault() for other types of faults, including alignment
faults caused by unaligned atomics. This has the unfortunate property of
causing those other faults to be reported as "KFENCE: use-after-free",
which is misleading and hinders debugging.
Fix this by only forwarding unhandled translation faults to the KFENCE
code, similar to what x86 does already.
Alexander has verified that this passes all the tests in the KFENCE test
suite and avoids bogus reports on misaligned atomics.
Link: https://lore.kernel.org/all/20221102081620.1465154-1-zhongbaisong@huawei.com/
Fixes: 840b23986344 ("arm64, kfence: enable KFENCE for ARM64")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221114104411.2853040-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/mm/fault.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index e38e7dc0f8f5..d09b21faa0b2 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -350,6 +350,11 @@ static bool is_el1_mte_sync_tag_check_fault(unsigned long esr)
return false;
}
+static bool is_translation_fault(unsigned long esr)
+{
+ return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_FAULT;
+}
+
static void __do_kernel_fault(unsigned long addr, unsigned long esr,
struct pt_regs *regs)
{
@@ -382,7 +387,8 @@ static void __do_kernel_fault(unsigned long addr, unsigned long esr,
} else if (addr < PAGE_SIZE) {
msg = "NULL pointer dereference";
} else {
- if (kfence_handle_page_fault(addr, esr & ESR_ELx_WNR, regs))
+ if (is_translation_fault(esr) &&
+ kfence_handle_page_fault(addr, esr & ESR_ELx_WNR, regs))
return;
msg = "paging request";
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 033/731] perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 032/731] arm64: mm: kfence: only handle translation faults Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 034/731] perf/arm_dmc620: Fix hotplug callback leak in dmc620_pmu_init() Greg Kroah-Hartman
` (708 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Suzuki K Poulose,
Will Deacon, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit facafab7611f7b872c6b9eeaff53461ef11f482e ]
dsu_pmu_init() won't remove the callback added by cpuhp_setup_state_multi()
when platform_driver_register() failed. Remove the callback by
cpuhp_remove_multi_state() in fail path.
Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus:
arm-ccn: Prevent hotplug callback leak")
Fixes: 7520fa99246d ("perf: ARM DynamIQ Shared Unit PMU support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221115070207.32634-2-yuancan@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/perf/arm_dsu_pmu.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/perf/arm_dsu_pmu.c b/drivers/perf/arm_dsu_pmu.c
index a36698a90d2f..54b8ba032c78 100644
--- a/drivers/perf/arm_dsu_pmu.c
+++ b/drivers/perf/arm_dsu_pmu.c
@@ -858,7 +858,11 @@ static int __init dsu_pmu_init(void)
if (ret < 0)
return ret;
dsu_pmu_cpuhp_state = ret;
- return platform_driver_register(&dsu_pmu_driver);
+ ret = platform_driver_register(&dsu_pmu_driver);
+ if (ret)
+ cpuhp_remove_multi_state(dsu_pmu_cpuhp_state);
+
+ return ret;
}
static void __exit dsu_pmu_exit(void)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 034/731] perf/arm_dmc620: Fix hotplug callback leak in dmc620_pmu_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 033/731] perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init() Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 035/731] perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init() Greg Kroah-Hartman
` (707 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Punit Agrawal,
Will Deacon, Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit d9f564c966e63925aac4ba273a9319d7fb6f4b4e ]
dmc620_pmu_init() won't remove the callback added by
cpuhp_setup_state_multi() when platform_driver_register() failed. Remove
the callback by cpuhp_remove_multi_state() in fail path.
Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus:
arm-ccn: Prevent hotplug callback leak")
Fixes: 53c218da220c ("driver/perf: Add PMU driver for the ARM DMC-620 memory controller")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
Link: https://lore.kernel.org/r/20221115115540.6245-2-shangxiaojing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/perf/arm_dmc620_pmu.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/perf/arm_dmc620_pmu.c b/drivers/perf/arm_dmc620_pmu.c
index 280a6ae3e27c..54aa4658fb36 100644
--- a/drivers/perf/arm_dmc620_pmu.c
+++ b/drivers/perf/arm_dmc620_pmu.c
@@ -725,6 +725,8 @@ static struct platform_driver dmc620_pmu_driver = {
static int __init dmc620_pmu_init(void)
{
+ int ret;
+
cpuhp_state_num = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
DMC620_DRVNAME,
NULL,
@@ -732,7 +734,11 @@ static int __init dmc620_pmu_init(void)
if (cpuhp_state_num < 0)
return cpuhp_state_num;
- return platform_driver_register(&dmc620_pmu_driver);
+ ret = platform_driver_register(&dmc620_pmu_driver);
+ if (ret)
+ cpuhp_remove_multi_state(cpuhp_state_num);
+
+ return ret;
}
static void __exit dmc620_pmu_exit(void)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 035/731] perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 034/731] perf/arm_dmc620: Fix hotplug callback leak in dmc620_pmu_init() Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 036/731] arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node Greg Kroah-Hartman
` (706 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Punit Agrawal,
Will Deacon, Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit 6f2d566b46436a50a80d6445e82879686b89588c ]
arm_smmu_pmu_init() won't remove the callback added by
cpuhp_setup_state_multi() when platform_driver_register() failed. Remove
the callback by cpuhp_remove_multi_state() in fail path.
Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus:
arm-ccn: Prevent hotplug callback leak")
Fixes: 7d839b4b9e00 ("perf/smmuv3: Add arm64 smmuv3 pmu driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
Link: https://lore.kernel.org/r/20221115115540.6245-3-shangxiaojing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/perf/arm_smmuv3_pmu.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c
index 226348822ab3..5933ad151f86 100644
--- a/drivers/perf/arm_smmuv3_pmu.c
+++ b/drivers/perf/arm_smmuv3_pmu.c
@@ -896,6 +896,8 @@ static struct platform_driver smmu_pmu_driver = {
static int __init arm_smmu_pmu_init(void)
{
+ int ret;
+
cpuhp_state_num = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
"perf/arm/pmcg:online",
NULL,
@@ -903,7 +905,11 @@ static int __init arm_smmu_pmu_init(void)
if (cpuhp_state_num < 0)
return cpuhp_state_num;
- return platform_driver_register(&smmu_pmu_driver);
+ ret = platform_driver_register(&smmu_pmu_driver);
+ if (ret)
+ cpuhp_remove_multi_state(cpuhp_state_num);
+
+ return ret;
}
module_init(arm_smmu_pmu_init);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 036/731] arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 035/731] perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init() Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 037/731] arm64: dts: ti: k3-j721e-main: " Greg Kroah-Hartman
` (705 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jayesh Choudhary, Nishanth Menon,
Manorit Chawdhry, Sasha Levin
From: Jayesh Choudhary <j-choudhary@ti.com>
[ Upstream commit b86833ab3653dbb0dc453eec4eef8615e63de4e2 ]
crypto driver itself is not dma-coherent. So drop it.
Fixes: b366b2409c97 ("arm64: dts: ti: k3-am6: Add crypto accelarator node")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20221031152520.355653-2-j-choudhary@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 82be00069bcd..4f232f575ab2 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -120,7 +120,6 @@ crypto: crypto@4e00000 {
dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
<&main_udmap 0x4001>;
dma-names = "tx", "rx1", "rx2";
- dma-coherent;
rng: rng@4e10000 {
compatible = "inside-secure,safexcel-eip76";
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 037/731] arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 036/731] arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 038/731] ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes Greg Kroah-Hartman
` (704 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jayesh Choudhary, Nishanth Menon,
Manorit Chawdhry, Sasha Levin
From: Jayesh Choudhary <j-choudhary@ti.com>
[ Upstream commit 26c5012403f3f1fd3bf8f7d3389ee539ae5cc162 ]
crypto driver itself is not dma-coherent. So drop it.
Fixes: 8ebcaaae8017 ("arm64: dts: ti: k3-j721e-main: Add crypto accelerator node")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20221031152520.355653-3-j-choudhary@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 6c81997ee28a..ad21bb1417aa 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -336,7 +336,6 @@ main_crypto: crypto@4e00000 {
dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
<&main_udmap 0x4001>;
dma-names = "tx", "rx1", "rx2";
- dma-coherent;
rng: rng@4e10000 {
compatible = "inside-secure,safexcel-eip76";
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 038/731] ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 037/731] arm64: dts: ti: k3-j721e-main: " Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 039/731] arm64: dts: mt6779: Fix devicetree build warnings Greg Kroah-Hartman
` (703 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jonathan Neuschäfer,
Joel Stanley, Sasha Levin
From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
[ Upstream commit ea3ce4cf076ba11bb591c8013c5315136cae52c8 ]
The unit addresses do not correspond to the nodes' reg properties,
because they don't have any.
Fixes: e42b650f828d ("ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB")
Fixes: ee33e2fb3d70 ("ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree")
Fixes: 59f5abe09f0a ("ARM: dts: nuvoton: Add Quanta GSJ BMC")
Fixes: 14579c76f5ca ("ARM: dts: nuvoton: Add Fii Kudo system")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20221031221553.163273-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/nuvoton-npcm730-gbs.dts | 2 +-
arch/arm/boot/dts/nuvoton-npcm730-gsj.dts | 2 +-
arch/arm/boot/dts/nuvoton-npcm730-kudo.dts | 6 +++---
arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 4 ++--
arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts | 6 +++---
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
index eb6eb21cb2a4..33c8d5b3d679 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
@@ -366,7 +366,7 @@ spi-nor@0 {
spi-max-frequency = <20000000>;
spi-rx-bus-width = <2>;
label = "bmc";
- partitions@80000000 {
+ partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
index d4ff49939a3d..bbe18618f5c5 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
@@ -142,7 +142,7 @@ spi-nor@0 {
reg = <0>;
spi-rx-bus-width = <2>;
- partitions@80000000 {
+ partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
index 82a104b2a65f..8e3425cb8e8b 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
@@ -388,7 +388,7 @@ spi-nor@0 {
spi-max-frequency = <5000000>;
spi-rx-bus-width = <2>;
label = "bmc";
- partitions@80000000 {
+ partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
@@ -422,7 +422,7 @@ spi-nor@1 {
reg = <1>;
spi-max-frequency = <5000000>;
spi-rx-bus-width = <2>;
- partitions@88000000 {
+ partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
@@ -447,7 +447,7 @@ spi-nor@0 {
reg = <0>;
spi-max-frequency = <5000000>;
spi-rx-bus-width = <2>;
- partitions@A0000000 {
+ partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
index 0334641f8829..cf274c926711 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -74,7 +74,7 @@ spi-nor@0 {
spi-rx-bus-width = <2>;
reg = <0>;
spi-max-frequency = <5000000>;
- partitions@80000000 {
+ partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
@@ -135,7 +135,7 @@ spi-nor@0 {
spi-rx-bus-width = <2>;
reg = <0>;
spi-max-frequency = <5000000>;
- partitions@A0000000 {
+ partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
index 767e0ac0df7c..7fe7efee28ac 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
@@ -107,7 +107,7 @@ spi-nor@0 {
reg = <0>;
spi-rx-bus-width = <2>;
- partitions@80000000 {
+ partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
@@ -146,7 +146,7 @@ spi-nor@1 {
reg = <1>;
npcm,fiu-rx-bus-width = <2>;
- partitions@88000000 {
+ partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
@@ -173,7 +173,7 @@ spi-nor@0 {
reg = <0>;
spi-rx-bus-width = <2>;
- partitions@A0000000 {
+ partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 039/731] arm64: dts: mt6779: Fix devicetree build warnings
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 038/731] ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 040/731] arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators Greg Kroah-Hartman
` (702 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit 4d759c524c15dc4151e40b9e3f368147fda7b789 ]
Rename fixed-clock oscillators to oscillator-26m and oscillator-32k
and remove the unit address to fix the unit_address_vs_reg warning;
fix the unit address for interrupt and intpol controllers by
removing a leading zero in their unit address.
This commit fixes the following warnings:
(unit_address_vs_reg): /oscillator@0: node has a unit name, but
no reg or ranges property
(unit_address_vs_reg): /oscillator@1: node has a unit name, but
no reg or ranges property
(simple_bus_reg): /soc/interrupt-controller@0c000000: simple-bus
unit address format error, expected "c000000"
(simple_bus_reg): /soc/intpol-controller@0c53a650: simple-bus
unit address format error, expected "c53a650"
Fixes: 4c7a6260775d ("arm64: dts: add dts nodes for MT6779")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt6779.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
index 9bdf5145966c..dde9ce137b4f 100644
--- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -88,14 +88,14 @@ pmu {
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
};
- clk26m: oscillator@0 {
+ clk26m: oscillator-26m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
clock-output-names = "clk26m";
};
- clk32k: oscillator@1 {
+ clk32k: oscillator-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
@@ -117,7 +117,7 @@ soc {
compatible = "simple-bus";
ranges;
- gic: interrupt-controller@0c000000 {
+ gic: interrupt-controller@c000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <4>;
interrupt-parent = <&gic>;
@@ -138,7 +138,7 @@ ppi_cluster1: interrupt-partition-1 {
};
- sysirq: intpol-controller@0c53a650 {
+ sysirq: intpol-controller@c53a650 {
compatible = "mediatek,mt6779-sysirq",
"mediatek,mt6577-sysirq";
interrupt-controller;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 040/731] arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 039/731] arm64: dts: mt6779: Fix devicetree build warnings Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 041/731] arm64: dts: mt2712e: Fix unit address for pinctrl node Greg Kroah-Hartman
` (701 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit e4495a0a8b3d84816c9a46edf3ce060bbf267475 ]
Rename the fixed-clock oscillators to remove the unit address.
This solves unit_address_vs_reg warnings.
Fixes: 5d4839709c8e ("arm64: dts: mt2712: Add clock controller device nodes")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index a9cca9c146fd..1c55689383b8 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -160,70 +160,70 @@ sys_clk: dummyclk {
#clock-cells = <0>;
};
- clk26m: oscillator@0 {
+ clk26m: oscillator-26m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
clock-output-names = "clk26m";
};
- clk32k: oscillator@1 {
+ clk32k: oscillator-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "clk32k";
};
- clkfpc: oscillator@2 {
+ clkfpc: oscillator-50m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
clock-output-names = "clkfpc";
};
- clkaud_ext_i_0: oscillator@3 {
+ clkaud_ext_i_0: oscillator-aud0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <6500000>;
clock-output-names = "clkaud_ext_i_0";
};
- clkaud_ext_i_1: oscillator@4 {
+ clkaud_ext_i_1: oscillator-aud1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <196608000>;
clock-output-names = "clkaud_ext_i_1";
};
- clkaud_ext_i_2: oscillator@5 {
+ clkaud_ext_i_2: oscillator-aud2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <180633600>;
clock-output-names = "clkaud_ext_i_2";
};
- clki2si0_mck_i: oscillator@6 {
+ clki2si0_mck_i: oscillator-i2s0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <30000000>;
clock-output-names = "clki2si0_mck_i";
};
- clki2si1_mck_i: oscillator@7 {
+ clki2si1_mck_i: oscillator-i2s1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <30000000>;
clock-output-names = "clki2si1_mck_i";
};
- clki2si2_mck_i: oscillator@8 {
+ clki2si2_mck_i: oscillator-i2s2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <30000000>;
clock-output-names = "clki2si2_mck_i";
};
- clktdmin_mclk_i: oscillator@9 {
+ clktdmin_mclk_i: oscillator-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <30000000>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 041/731] arm64: dts: mt2712e: Fix unit address for pinctrl node
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 040/731] arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 042/731] arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names Greg Kroah-Hartman
` (700 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit 1d4516f53a611b362db7ba7a8889923d469f57e1 ]
The unit address for the pinctrl node is (0x)1000b000 and not
(0x)10005000, which is the syscfg_pctl_a address instead.
This fixes the following warning:
arch/arm64/boot/dts/mediatek/mt2712e.dtsi:264.40-267.4: Warning
(unique_unit_address): /syscfg_pctl_a@10005000: duplicate
unit-address (also used in node /pinctrl@10005000)
Fixes: f0c64340b748 ("arm64: dts: mt2712: add pintcrl device node.")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 1c55689383b8..993a03d7fff1 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -266,7 +266,7 @@ syscfg_pctl_a: syscfg_pctl_a@10005000 {
reg = <0 0x10005000 0 0x1000>;
};
- pio: pinctrl@10005000 {
+ pio: pinctrl@1000b000 {
compatible = "mediatek,mt2712-pinctrl";
reg = <0 0x1000b000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 042/731] arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 041/731] arm64: dts: mt2712e: Fix unit address for pinctrl node Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 043/731] arm64: dts: mt2712-evb: Fix usb vbus " Greg Kroah-Hartman
` (699 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit 377063156893bf6c088309ac799fe5c6dce2822d ]
Update the names to regulator-vproc-buck{0,1} to fix unit_addres_vs_reg
warnings for those.
Fixes: f75dd8bdd344 ("arm64: dts: mediatek: add mt2712 cpufreq related device nodes")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index 7d369fdd3117..b78d441616b1 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -26,14 +26,14 @@ chosen {
stdout-path = "serial0:921600n8";
};
- cpus_fixed_vproc0: fixedregulator@0 {
+ cpus_fixed_vproc0: regulator-vproc-buck0 {
compatible = "regulator-fixed";
regulator-name = "vproc_buck0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
- cpus_fixed_vproc1: fixedregulator@1 {
+ cpus_fixed_vproc1: regulator-vproc-buck1 {
compatible = "regulator-fixed";
regulator-name = "vproc_buck1";
regulator-min-microvolt = <1000000>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 043/731] arm64: dts: mt2712-evb: Fix usb vbus regulators unit names
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 042/731] arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 044/731] arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings Greg Kroah-Hartman
` (698 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit ec1ae39a8d25cfb067b5459fac7c5b7b9bce6f6a ]
Update the names to regulator-usb-p{0-3}-vbus to fix unit_address_vs_reg
warnings for those.
Fixes: 1724f4cc5133 ("arm64: dts: Add USB3 related nodes for MT2712")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index b78d441616b1..9d20cabf4f69 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -50,7 +50,7 @@ extcon_usb1: extcon_iddig1 {
id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
};
- usb_p0_vbus: regulator@2 {
+ usb_p0_vbus: regulator-usb-p0-vbus {
compatible = "regulator-fixed";
regulator-name = "p0_vbus";
regulator-min-microvolt = <5000000>;
@@ -59,7 +59,7 @@ usb_p0_vbus: regulator@2 {
enable-active-high;
};
- usb_p1_vbus: regulator@3 {
+ usb_p1_vbus: regulator-usb-p1-vbus {
compatible = "regulator-fixed";
regulator-name = "p1_vbus";
regulator-min-microvolt = <5000000>;
@@ -68,7 +68,7 @@ usb_p1_vbus: regulator@3 {
enable-active-high;
};
- usb_p2_vbus: regulator@4 {
+ usb_p2_vbus: regulator-usb-p2-vbus {
compatible = "regulator-fixed";
regulator-name = "p2_vbus";
regulator-min-microvolt = <5000000>;
@@ -77,7 +77,7 @@ usb_p2_vbus: regulator@4 {
enable-active-high;
};
- usb_p3_vbus: regulator@5 {
+ usb_p3_vbus: regulator-usb-p3-vbus {
compatible = "regulator-fixed";
regulator-name = "p3_vbus";
regulator-min-microvolt = <5000000>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 044/731] arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 043/731] arm64: dts: mt2712-evb: Fix usb vbus " Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 045/731] arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name Greg Kroah-Hartman
` (697 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit 509438336ce75c8b4e6ce8e8d507dc77d0783bdd ]
Fix the pinctrl submodes and optee node to remove unneeded unit address,
fixing all unit_address_vs_reg warnings.
Fixes: 9983822c8cf9 ("arm64: dts: mediatek: add pumpkin board dts")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index fcddec14738d..54514d62398f 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -17,7 +17,7 @@ chosen {
};
firmware {
- optee: optee@4fd00000 {
+ optee: optee {
compatible = "linaro,optee-tz";
method = "smc";
};
@@ -210,7 +210,7 @@ pins_cmd_dat {
};
};
- i2c0_pins_a: i2c0@0 {
+ i2c0_pins_a: i2c0 {
pins1 {
pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
<MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
@@ -218,7 +218,7 @@ pins1 {
};
};
- i2c2_pins_a: i2c2@0 {
+ i2c2_pins_a: i2c2 {
pins1 {
pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
<MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 045/731] arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 044/731] arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 046/731] ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port Greg Kroah-Hartman
` (696 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit 5f535cc583759c9c60d4cc9b8d221762e2d75387 ]
Update its unit name to oscillator-26m and remove the unneeded unit
address to fix a unit_address_vs_reg warning.
Fixes: 464c510f60c6 ("arm64: dts: mediatek: add mt6797 support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt6797.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 15616231022a..c3677d77e0a4 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -95,7 +95,7 @@ cpu9: cpu@201 {
};
};
- clk26m: oscillator@0 {
+ clk26m: oscillator-26m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 046/731] ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 045/731] arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 047/731] ARM: dts: armada-370: " Greg Kroah-Hartman
` (695 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pali Rohár, Gregory CLEMENT,
Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit dcc7d8c72b64a479b8017e4332d99179deb8802d ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 74ecaa403a74 ("ARM: dove: add PCIe controllers to SoC DT")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/dove.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 89e0bdaf3a85..726d353eda68 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -129,7 +129,7 @@ pcie0: pcie@1 {
pcie1: pcie@2 {
device_type = "pci";
status = "disabled";
- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+ assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
clocks = <&gate_clk 5>;
marvell,pcie-port = <1>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 047/731] ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 046/731] ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 048/731] ARM: dts: armada-xp: " Greg Kroah-Hartman
` (694 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pali Rohár, Gregory CLEMENT,
Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit d9208b0fa2e803d16b28d91bf1d46b7ee9ea13c6 ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: a09a0b7c6ff1 ("arm: mvebu: add PCIe Device Tree informations for Armada 370")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/armada-370.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 46e6d3ed8f35..c042c416a94a 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -74,7 +74,7 @@ pcie0: pcie@1,0 {
pcie2: pcie@2,0 {
device_type = "pci";
- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+ assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 048/731] ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 047/731] ARM: dts: armada-370: " Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 049/731] ARM: dts: armada-375: " Greg Kroah-Hartman
` (693 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pali Rohár, Gregory CLEMENT,
Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit eab276787f456cbea89fabea110fe0728673d308 ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 9d8f44f02d4a ("arm: mvebu: add PCIe Device Tree informations for Armada XP")
Fixes: 12b69a599745 ("ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable")
Fixes: 2163e61c92d9 ("ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 8 ++++----
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 16 ++++++++--------
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 8558bf6bb54c..d55fe162fc7f 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -97,7 +97,7 @@ pcie1: pcie@1,0 {
pcie2: pcie@2,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -115,7 +115,7 @@ pcie2: pcie@2,0 {
pcie3: pcie@3,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+ assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -133,7 +133,7 @@ pcie3: pcie@3,0 {
pcie4: pcie@4,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+ assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -151,7 +151,7 @@ pcie4: pcie@4,0 {
pcie5: pcie@5,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 2d85fe8ac327..fdcc81819940 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -112,7 +112,7 @@ pcie1: pcie@1,0 {
pcie2: pcie@2,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -130,7 +130,7 @@ pcie2: pcie@2,0 {
pcie3: pcie@3,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+ assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -148,7 +148,7 @@ pcie3: pcie@3,0 {
pcie4: pcie@4,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+ assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -166,7 +166,7 @@ pcie4: pcie@4,0 {
pcie5: pcie@5,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -184,7 +184,7 @@ pcie5: pcie@5,0 {
pcie6: pcie@6,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+ assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -202,7 +202,7 @@ pcie6: pcie@6,0 {
pcie7: pcie@7,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+ assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -220,7 +220,7 @@ pcie7: pcie@7,0 {
pcie8: pcie@8,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+ assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -238,7 +238,7 @@ pcie8: pcie@8,0 {
pcie9: pcie@9,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+ assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 049/731] ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 048/731] ARM: dts: armada-xp: " Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 050/731] ARM: dts: armada-38x: " Greg Kroah-Hartman
` (692 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pali Rohár, Gregory CLEMENT,
Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit 823956d2436f70ced74c0fe8ab99facd8abfc060 ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 4de59085091f ("ARM: mvebu: add Device Tree description of the Armada 375 SoC")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/armada-375.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 7f2f24a29e6c..352a2f7ba311 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -582,7 +582,7 @@ pcie0: pcie@1,0 {
pcie1: pcie@2,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 050/731] ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 049/731] ARM: dts: armada-375: " Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 051/731] ARM: dts: armada-39x: " Greg Kroah-Hartman
` (691 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pali Rohár, Gregory CLEMENT,
Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit 44f47b7a8fa4678ce4c38ea74837e4996b9df6d6 ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/armada-380.dtsi | 4 ++--
arch/arm/boot/dts/armada-385.dtsi | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index cff1269f3fbf..7146cc8f082a 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -79,7 +79,7 @@ pcie@1,0 {
/* x1 port */
pcie@2,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -98,7 +98,7 @@ pcie@2,0 {
/* x1 port */
pcie@3,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index f0022d10c715..f081f7cb66e5 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -84,7 +84,7 @@ pcie1: pcie@1,0 {
/* x1 port */
pcie2: pcie@2,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -103,7 +103,7 @@ pcie2: pcie@2,0 {
/* x1 port */
pcie3: pcie@3,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -125,7 +125,7 @@ pcie3: pcie@3,0 {
*/
pcie4: pcie@4,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+ assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 051/731] ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 050/731] ARM: dts: armada-38x: " Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 052/731] ARM: dts: turris-omnia: Add ethernet aliases Greg Kroah-Hartman
` (690 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pali Rohár, Gregory CLEMENT,
Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit 69236d2391b4d7324b11c3252921571577892e7b ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 538da83ddbea ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/armada-39x.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index e0b7c2099831..9525e7b7f436 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -453,7 +453,7 @@ pcie@1,0 {
/* x1 port */
pcie@2,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -472,7 +472,7 @@ pcie@2,0 {
/* x1 port */
pcie@3,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -494,7 +494,7 @@ pcie@3,0 {
*/
pcie@4,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+ assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 052/731] ARM: dts: turris-omnia: Add ethernet aliases
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 051/731] ARM: dts: armada-39x: " Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 053/731] ARM: dts: turris-omnia: Add switch port 6 node Greg Kroah-Hartman
` (689 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pali Rohár, Gregory CLEMENT,
Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit f1f3e530c59a7e8c5f06172f4c28b945a6b4bfb8 ]
This allows bootloader to correctly pass MAC addresses used by bootloader
to individual interfaces into kernel device tree.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/armada-385-turris-omnia.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 01b0dfd55d70..86e8a4680273 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -23,6 +23,12 @@ chosen {
stdout-path = &uart0;
};
+ aliases {
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ ethernet2 = ð2;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>; /* 1024 MB */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 053/731] ARM: dts: turris-omnia: Add switch port 6 node
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 052/731] ARM: dts: turris-omnia: Add ethernet aliases Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 054/731] ARM: dts: armada-38x: Fix compatible string for gpios Greg Kroah-Hartman
` (688 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pali Rohár, Andrew Lunn,
Gregory CLEMENT, Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit f87db2005f73876602211af0ee156817019b6bda ]
Switch port 6 is connected to eth0, so add appropriate device tree node for it.
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/armada-385-turris-omnia.dts | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 86e8a4680273..e7649c795699 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -456,7 +456,17 @@ fixed-link {
};
};
- /* port 6 is connected to eth0 */
+ ports@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <ð0>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
};
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 054/731] ARM: dts: armada-38x: Fix compatible string for gpios
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 053/731] ARM: dts: turris-omnia: Add switch port 6 node Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 055/731] ARM: dts: armada-39x: " Greg Kroah-Hartman
` (687 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pali Rohár,
Uwe Kleine-König, Gregory CLEMENT, Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit c4de4667f15d04ef5920bacf41e514ec7d1ef03d ]
Armada 38x supports per CPU interrupts for gpios, like Armada XP. Pre-XP
variants like Armada 370 do not support per CPU interrupts for gpios.
So change compatible string for Armada 38x from "marvell,armada-370-gpio"
which indicates pre-XP variant to "marvell,armadaxp-gpio" which indicates
XP variant or new.
Driver gpio-mvebu.c which handles both pre-XP and XP variants already
provides support for per CPU interrupts on XP and newer variants.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 7cb2acb3fbae ("ARM: dts: mvebu: Add PWM properties for armada-38x")
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/armada-38x.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index df3c8d1d8f64..9343de6947b3 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -292,7 +292,7 @@ sata3_pins: sata-pins-3 {
};
gpio0: gpio@18100 {
- compatible = "marvell,armada-370-gpio",
+ compatible = "marvell,armadaxp-gpio",
"marvell,orion-gpio";
reg = <0x18100 0x40>, <0x181c0 0x08>;
reg-names = "gpio", "pwm";
@@ -310,7 +310,7 @@ gpio0: gpio@18100 {
};
gpio1: gpio@18140 {
- compatible = "marvell,armada-370-gpio",
+ compatible = "marvell,armadaxp-gpio",
"marvell,orion-gpio";
reg = <0x18140 0x40>, <0x181c8 0x08>;
reg-names = "gpio", "pwm";
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 055/731] ARM: dts: armada-39x: Fix compatible string for gpios
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 054/731] ARM: dts: armada-38x: Fix compatible string for gpios Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 056/731] arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC Greg Kroah-Hartman
` (686 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pali Rohár, Gregory CLEMENT,
Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit d10886a4e6f85ee18d47a1066a52168461370ded ]
Armada 39x supports per CPU interrupts for gpios, like Armada XP.
So add compatible string "marvell,armadaxp-gpio" for Armada 39x GPIO nodes.
Driver gpio-mvebu.c which handles both pre-XP and XP variants already
provides support for per CPU interrupts on XP and newer variants.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: d81a914fc630 ("ARM: dts: mvebu: armada-39x: add missing nodes describing GPIO's")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/armada-39x.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index 9525e7b7f436..9aad10fd3823 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -213,7 +213,7 @@ nand_pins: nand-pins {
};
gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
+ compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
reg = <0x18100 0x40>;
ngpios = <32>;
gpio-controller;
@@ -227,7 +227,7 @@ gpio0: gpio@18100 {
};
gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
+ compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
reg = <0x18140 0x40>;
ngpios = <28>;
gpio-controller;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 056/731] arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 055/731] ARM: dts: armada-39x: " Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 057/731] seccomp: Move copy_seccomp() to no failure path Greg Kroah-Hartman
` (685 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pali Rohár, Andrew Lunn,
Gregory CLEMENT, Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit 21aad8ba615e9c39cee6c5d0b76726f63791926c ]
MCP7940MT-I/MNY RTC has connected interrupt line to GPIO2_5.
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 1cee26479bfe..b276dd77df83 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -125,9 +125,12 @@ &i2c0 {
/delete-property/ mrvl,i2c-fast-mode;
status = "okay";
+ /* MCP7940MT-I/MNY RTC */
rtc@6f {
compatible = "microchip,mcp7940x";
reg = <0x6f>;
+ interrupt-parent = <&gpiosb>;
+ interrupts = <5 0>; /* GPIO2_5 */
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 057/731] seccomp: Move copy_seccomp() to no failure path.
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 056/731] arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 058/731] pstore/ram: Fix error return code in ramoops_probe() Greg Kroah-Hartman
` (684 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+ab17848fe269b573eb71,
Ayushman Dutta, Kees Cook, Kuniyuki Iwashima,
Christian Brauner (Microsoft),
Sasha Levin
From: Kuniyuki Iwashima <kuniyu@amazon.com>
[ Upstream commit a1140cb215fa13dcec06d12ba0c3ee105633b7c4 ]
Our syzbot instance reported memory leaks in do_seccomp() [0], similar
to the report [1]. It shows that we miss freeing struct seccomp_filter
and some objects included in it.
We can reproduce the issue with the program below [2] which calls one
seccomp() and two clone() syscalls.
The first clone()d child exits earlier than its parent and sends a
signal to kill it during the second clone(), more precisely before the
fatal_signal_pending() test in copy_process(). When the parent receives
the signal, it has to destroy the embryonic process and return -EINTR to
user space. In the failure path, we have to call seccomp_filter_release()
to decrement the filter's refcount.
Initially, we called it in free_task() called from the failure path, but
the commit 3a15fb6ed92c ("seccomp: release filter after task is fully
dead") moved it to release_task() to notify user space as early as possible
that the filter is no longer used.
To keep the change and current seccomp refcount semantics, let's move
copy_seccomp() just after the signal check and add a WARN_ON_ONCE() in
free_task() for future debugging.
[0]:
unreferenced object 0xffff8880063add00 (size 256):
comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.914s)
hex dump (first 32 bytes):
01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
backtrace:
do_seccomp (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/seccomp.c:666 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffffc90000035000 (size 4096):
comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
__vmalloc_node_range (mm/vmalloc.c:3226)
__vmalloc_node (mm/vmalloc.c:3261 (discriminator 4))
bpf_prog_alloc_no_stats (kernel/bpf/core.c:91)
bpf_prog_alloc (kernel/bpf/core.c:129)
bpf_prog_create_from_user (net/core/filter.c:1414)
do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff888003fa1000 (size 1024):
comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
bpf_prog_alloc_no_stats (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/bpf/core.c:95)
bpf_prog_alloc (kernel/bpf/core.c:129)
bpf_prog_create_from_user (net/core/filter.c:1414)
do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff888006360240 (size 16):
comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
hex dump (first 16 bytes):
01 00 37 00 76 65 72 6c e0 83 01 06 80 88 ff ff ..7.verl........
backtrace:
bpf_prog_store_orig_filter (net/core/filter.c:1137)
bpf_prog_create_from_user (net/core/filter.c:1428)
do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff8880060183e0 (size 8):
comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
hex dump (first 8 bytes):
06 00 00 00 00 00 ff 7f ........
backtrace:
kmemdup (mm/util.c:129)
bpf_prog_store_orig_filter (net/core/filter.c:1144)
bpf_prog_create_from_user (net/core/filter.c:1428)
do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[1]: https://syzkaller.appspot.com/bug?id=2809bb0ac77ad9aa3f4afe42d6a610aba594a987
[2]:
void main(void)
{
struct sock_filter filter[] = {
BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_ALLOW),
};
struct sock_fprog fprog = {
.len = sizeof(filter) / sizeof(filter[0]),
.filter = filter,
};
long i, pid;
syscall(__NR_seccomp, SECCOMP_SET_MODE_FILTER, 0, &fprog);
for (i = 0; i < 2; i++) {
pid = syscall(__NR_clone, CLONE_NEWNET | SIGKILL, NULL, NULL, 0);
if (pid == 0)
return;
}
}
Fixes: 3a15fb6ed92c ("seccomp: release filter after task is fully dead")
Reported-by: syzbot+ab17848fe269b573eb71@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220823154532.82913-1-kuniyu@amazon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/fork.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/kernel/fork.c b/kernel/fork.c
index 908ba3c93893..3fb7e9e6a7b9 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -446,6 +446,9 @@ void put_task_stack(struct task_struct *tsk)
void free_task(struct task_struct *tsk)
{
+#ifdef CONFIG_SECCOMP
+ WARN_ON_ONCE(tsk->seccomp.filter);
+#endif
release_user_cpus_ptr(tsk);
scs_release(tsk);
@@ -2345,12 +2348,6 @@ static __latent_entropy struct task_struct *copy_process(
spin_lock(¤t->sighand->siglock);
- /*
- * Copy seccomp details explicitly here, in case they were changed
- * before holding sighand lock.
- */
- copy_seccomp(p);
-
rseq_fork(p, clone_flags);
/* Don't start children in a dying pid namespace */
@@ -2365,6 +2362,14 @@ static __latent_entropy struct task_struct *copy_process(
goto bad_fork_cancel_cgroup;
}
+ /* No more failure paths after this point. */
+
+ /*
+ * Copy seccomp details explicitly here, in case they were changed
+ * before holding sighand lock.
+ */
+ copy_seccomp(p);
+
init_task_pid_links(p);
if (likely(p->pid)) {
ptrace_init_task(p, (clone_flags & CLONE_PTRACE) || trace);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 058/731] pstore/ram: Fix error return code in ramoops_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 057/731] seccomp: Move copy_seccomp() to no failure path Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 059/731] ARM: mmp: fix timer_read delay Greg Kroah-Hartman
` (683 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Wang Yufen, Kees Cook, Sasha Levin
From: Wang Yufen <wangyufen@huawei.com>
[ Upstream commit e1fce564900f8734edf15b87f028c57e14f6e28d ]
In the if (dev_of_node(dev) && !pdata) path, the "err" may be assigned a
value of 0, so the error return code -EINVAL may be incorrectly set
to 0. To fix set valid return code before calling to goto.
Fixes: 35da60941e44 ("pstore/ram: add Device Tree bindings")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/1669969374-46582-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/pstore/ram.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c
index fefe3d391d3a..74e4d93f3e08 100644
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -735,6 +735,7 @@ static int ramoops_probe(struct platform_device *pdev)
/* Make sure we didn't get bogus platform data pointer. */
if (!pdata) {
pr_err("NULL platform data\n");
+ err = -EINVAL;
goto fail_out;
}
@@ -742,6 +743,7 @@ static int ramoops_probe(struct platform_device *pdev)
!pdata->ftrace_size && !pdata->pmsg_size)) {
pr_err("The memory size and the record/console size must be "
"non-zero\n");
+ err = -EINVAL;
goto fail_out;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 059/731] ARM: mmp: fix timer_read delay
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 058/731] pstore/ram: Fix error return code in ramoops_probe() Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 060/731] pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP Greg Kroah-Hartman
` (682 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Doug Brown, Arnd Bergmann, Sasha Levin
From: Doug Brown <doug@schmorgal.com>
[ Upstream commit e348b4014c31041e13ff370669ba3348c4d385e3 ]
timer_read() was using an empty 100-iteration loop to wait for the
TMR_CVWR register to capture the latest timer counter value. The delay
wasn't long enough. This resulted in CPU idle time being extremely
underreported on PXA168 with CONFIG_NO_HZ_IDLE=y.
Switch to the approach used in the vendor kernel, which implements the
capture delay by reading TMR_CVWR a few times instead.
Fixes: 49cbe78637eb ("[ARM] pxa: add base support for Marvell's PXA168 processor line")
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20221204005117.53452-3-doug@schmorgal.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-mmp/time.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 41b2e8abc9e6..708816caf859 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -43,18 +43,21 @@
static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
/*
- * FIXME: the timer needs some delay to stablize the counter capture
+ * Read the timer through the CVWR register. Delay is required after requesting
+ * a read. The CR register cannot be directly read due to metastability issues
+ * documented in the PXA168 software manual.
*/
static inline uint32_t timer_read(void)
{
- int delay = 100;
+ uint32_t val;
+ int delay = 3;
__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
while (delay--)
- cpu_relax();
+ val = __raw_readl(mmp_timer_base + TMR_CVWR(1));
- return __raw_readl(mmp_timer_base + TMR_CVWR(1));
+ return val;
}
static u64 notrace mmp_read_sched_clock(void)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 060/731] pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 059/731] ARM: mmp: fix timer_read delay Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 061/731] tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init() Greg Kroah-Hartman
` (681 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Brian Geffon, Mike Rapoport,
Andrew Morton, Stephen Boyd, Kees Cook, Sasha Levin
From: Stephen Boyd <swboyd@chromium.org>
[ Upstream commit e6b842741b4f39007215fd7e545cb55aa3d358a2 ]
An oops can be induced by running 'cat /proc/kcore > /dev/null' on
devices using pstore with the ram backend because kmap_atomic() assumes
lowmem pages are accessible with __va().
Unable to handle kernel paging request at virtual address ffffff807ff2b000
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081d87000
[ffffff807ff2b000] pgd=180000017fe18003, p4d=180000017fe18003, pud=180000017fe18003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] PREEMPT SMP
Modules linked in: dm_integrity
CPU: 7 PID: 21179 Comm: perf Not tainted 5.15.67-10882-ge4eb2eb988cd #1 baa443fb8e8477896a370b31a821eb2009f9bfba
Hardware name: Google Lazor (rev3 - 8) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __memcpy+0x110/0x260
lr : vread+0x194/0x294
sp : ffffffc013ee39d0
x29: ffffffc013ee39f0 x28: 0000000000001000 x27: ffffff807ff2b000
x26: 0000000000001000 x25: ffffffc0085a2000 x24: ffffff802d4b3000
x23: ffffff80f8a60000 x22: ffffff802d4b3000 x21: ffffffc0085a2000
x20: ffffff8080b7bc68 x19: 0000000000001000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffffffd3073f2e60
x14: ffffffffad588000 x13: 0000000000000000 x12: 0000000000000001
x11: 00000000000001a2 x10: 00680000fff2bf0b x9 : 03fffffff807ff2b
x8 : 0000000000000001 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffffff802d4b4000 x4 : ffffff807ff2c000 x3 : ffffffc013ee3a78
x2 : 0000000000001000 x1 : ffffff807ff2b000 x0 : ffffff802d4b3000
Call trace:
__memcpy+0x110/0x260
read_kcore+0x584/0x778
proc_reg_read+0xb4/0xe4
During early boot, memblock reserves the pages for the ramoops reserved
memory node in DT that would otherwise be part of the direct lowmem
mapping. Pstore's ram backend reuses those reserved pages to change the
memory type (writeback or non-cached) by passing the pages to vmap()
(see pfn_to_page() usage in persistent_ram_vmap() for more details) with
specific flags. When read_kcore() starts iterating over the vmalloc
region, it runs over the virtual address that vmap() returned for
ramoops. In aligned_vread() the virtual address is passed to
vmalloc_to_page() which returns the page struct for the reserved lowmem
area. That lowmem page is passed to kmap_atomic(), which effectively
calls page_to_virt() that assumes a lowmem page struct must be directly
accessible with __va() and friends. These pages are mapped via vmap()
though, and the lowmem mapping was never made, so accessing them via the
lowmem virtual address oopses like above.
Let's side-step this problem by passing VM_IOREMAP to vmap(). This will
tell vread() to not include the ramoops region in the kcore. Instead the
area will look like a bunch of zeros. The alternative is to teach kmap()
about vmalloc areas that intersect with lowmem. Presumably such a change
isn't a one-liner, and there isn't much interest in inspecting the
ramoops region in kcore files anyway, so the most expedient route is
taken for now.
Cc: Brian Geffon <bgeffon@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 404a6043385d ("staging: android: persistent_ram: handle reserving and mapping memory")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221205233136.3420802-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/pstore/ram_core.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/pstore/ram_core.c b/fs/pstore/ram_core.c
index fe5305028c6e..155c7010b1f8 100644
--- a/fs/pstore/ram_core.c
+++ b/fs/pstore/ram_core.c
@@ -439,7 +439,11 @@ static void *persistent_ram_vmap(phys_addr_t start, size_t size,
phys_addr_t addr = page_start + i * PAGE_SIZE;
pages[i] = pfn_to_page(addr >> PAGE_SHIFT);
}
- vaddr = vmap(pages, page_count, VM_MAP, prot);
+ /*
+ * VM_IOREMAP used here to bypass this region during vread()
+ * and kmap_atomic() (i.e. kcore) to avoid __va() failures.
+ */
+ vaddr = vmap(pages, page_count, VM_MAP | VM_IOREMAP, prot);
kfree(pages);
/*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 061/731] tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 060/731] pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 062/731] tpm/tpm_crb: Fix error message in __crb_relinquish_locality() Greg Kroah-Hartman
` (680 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Maxim Uvarov,
Jarkko Sakkinen, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 2b7d07f7acaac2c7750e420dcf4414588ede6d03 ]
The ftpm_mod_init() returns the driver_register() directly without checking
its return value, if driver_register() failed, the ftpm_tee_plat_driver is
not unregistered.
Fix by unregister ftpm_tee_plat_driver when driver_register() failed.
Fixes: 9f1944c23c8c ("tpm_ftpm_tee: register driver on TEE bus")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/tpm/tpm_ftpm_tee.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/char/tpm/tpm_ftpm_tee.c b/drivers/char/tpm/tpm_ftpm_tee.c
index 6e3235565a4d..d9daaafdd295 100644
--- a/drivers/char/tpm/tpm_ftpm_tee.c
+++ b/drivers/char/tpm/tpm_ftpm_tee.c
@@ -397,7 +397,13 @@ static int __init ftpm_mod_init(void)
if (rc)
return rc;
- return driver_register(&ftpm_tee_driver.driver);
+ rc = driver_register(&ftpm_tee_driver.driver);
+ if (rc) {
+ platform_driver_unregister(&ftpm_tee_plat_driver);
+ return rc;
+ }
+
+ return 0;
}
static void __exit ftpm_mod_exit(void)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 062/731] tpm/tpm_crb: Fix error message in __crb_relinquish_locality()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 061/731] tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init() Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 063/731] ovl: store lower path in ovl_inode Greg Kroah-Hartman
` (679 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michael Kelley, Tomas Winkler,
Jarkko Sakkinen, Sasha Levin
From: Michael Kelley <mikelley@microsoft.com>
[ Upstream commit f5264068071964b56dc02c9dab3d11574aaca6ff ]
The error message in __crb_relinquish_locality() mentions requestAccess
instead of Relinquish. Fix it.
Fixes: 888d867df441 ("tpm: cmd_ready command can be issued only after granting locality")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/tpm/tpm_crb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
index 18606651d1aa..65f8f179a27f 100644
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -252,7 +252,7 @@ static int __crb_relinquish_locality(struct device *dev,
iowrite32(CRB_LOC_CTRL_RELINQUISH, &priv->regs_h->loc_ctrl);
if (!crb_wait_for_reg_32(&priv->regs_h->loc_state, mask, value,
TPM2_TIMEOUT_C)) {
- dev_warn(dev, "TPM_LOC_STATE_x.requestAccess timed out\n");
+ dev_warn(dev, "TPM_LOC_STATE_x.Relinquish timed out\n");
return -ETIME;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 063/731] ovl: store lower path in ovl_inode
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 062/731] tpm/tpm_crb: Fix error message in __crb_relinquish_locality() Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 064/731] ovl: use ovl_copy_{real,upper}attr() wrappers Greg Kroah-Hartman
` (678 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, linux-unionfs, Giuseppe Scrivano,
Christian Brauner (Microsoft),
Amir Goldstein, Miklos Szeredi, Sasha Levin
From: Amir Goldstein <amir73il@gmail.com>
[ Upstream commit ffa5723c6d259b3191f851a50a98d0352b345b39 ]
Create some ovl_i_* helpers to get real path from ovl inode. Instead of
just stashing struct inode for the lower layer we stash struct path for
the lower layer. The helpers allow to retrieve a struct path for the
relevant upper or lower layer. This will be used when retrieving
information based on struct inode when copying up inode attributes from
upper or lower inodes to ovl inodes and when checking permissions in
ovl_permission() in following patches. This is needed to support
idmapped base layers with overlay.
Cc: <linux-unionfs@vger.kernel.org>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stable-dep-of: b306e90ffabd ("ovl: remove privs in ovl_copyfile()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/overlayfs/inode.c | 11 +++++++----
fs/overlayfs/overlayfs.h | 2 ++
fs/overlayfs/ovl_entry.h | 2 +-
fs/overlayfs/super.c | 5 +++--
fs/overlayfs/util.c | 15 ++++++++++++++-
5 files changed, 27 insertions(+), 8 deletions(-)
diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
index 1f36158c7dbe..06479bc88b7e 100644
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -777,13 +777,16 @@ void ovl_inode_init(struct inode *inode, struct ovl_inode_params *oip,
unsigned long ino, int fsid)
{
struct inode *realinode;
+ struct ovl_inode *oi = OVL_I(inode);
if (oip->upperdentry)
- OVL_I(inode)->__upperdentry = oip->upperdentry;
- if (oip->lowerpath && oip->lowerpath->dentry)
- OVL_I(inode)->lower = igrab(d_inode(oip->lowerpath->dentry));
+ oi->__upperdentry = oip->upperdentry;
+ if (oip->lowerpath && oip->lowerpath->dentry) {
+ oi->lowerpath.dentry = dget(oip->lowerpath->dentry);
+ oi->lowerpath.layer = oip->lowerpath->layer;
+ }
if (oip->lowerdata)
- OVL_I(inode)->lowerdata = igrab(d_inode(oip->lowerdata));
+ oi->lowerdata = igrab(d_inode(oip->lowerdata));
realinode = ovl_inode_real(inode);
ovl_copyattr(realinode, inode);
diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h
index 2cd5741c873b..27f221962665 100644
--- a/fs/overlayfs/overlayfs.h
+++ b/fs/overlayfs/overlayfs.h
@@ -293,10 +293,12 @@ enum ovl_path_type ovl_path_type(struct dentry *dentry);
void ovl_path_upper(struct dentry *dentry, struct path *path);
void ovl_path_lower(struct dentry *dentry, struct path *path);
void ovl_path_lowerdata(struct dentry *dentry, struct path *path);
+void ovl_i_path_real(struct inode *inode, struct path *path);
enum ovl_path_type ovl_path_real(struct dentry *dentry, struct path *path);
struct dentry *ovl_dentry_upper(struct dentry *dentry);
struct dentry *ovl_dentry_lower(struct dentry *dentry);
struct dentry *ovl_dentry_lowerdata(struct dentry *dentry);
+const struct ovl_layer *ovl_i_layer_lower(struct inode *inode);
const struct ovl_layer *ovl_layer_lower(struct dentry *dentry);
struct dentry *ovl_dentry_real(struct dentry *dentry);
struct dentry *ovl_i_dentry_upper(struct inode *inode);
diff --git a/fs/overlayfs/ovl_entry.h b/fs/overlayfs/ovl_entry.h
index 63efee554f69..b2d64f3c974b 100644
--- a/fs/overlayfs/ovl_entry.h
+++ b/fs/overlayfs/ovl_entry.h
@@ -129,7 +129,7 @@ struct ovl_inode {
unsigned long flags;
struct inode vfs_inode;
struct dentry *__upperdentry;
- struct inode *lower;
+ struct ovl_path lowerpath;
/* synchronize copy up and more */
struct mutex lock;
diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c
index 9837aaf9caf1..e2ed38c5f721 100644
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -184,7 +184,8 @@ static struct inode *ovl_alloc_inode(struct super_block *sb)
oi->version = 0;
oi->flags = 0;
oi->__upperdentry = NULL;
- oi->lower = NULL;
+ oi->lowerpath.dentry = NULL;
+ oi->lowerpath.layer = NULL;
oi->lowerdata = NULL;
mutex_init(&oi->lock);
@@ -205,7 +206,7 @@ static void ovl_destroy_inode(struct inode *inode)
struct ovl_inode *oi = OVL_I(inode);
dput(oi->__upperdentry);
- iput(oi->lower);
+ dput(oi->lowerpath.dentry);
if (S_ISDIR(inode->i_mode))
ovl_dir_cache_free(inode);
else
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c
index f48284a2a896..2567918dc684 100644
--- a/fs/overlayfs/util.c
+++ b/fs/overlayfs/util.c
@@ -236,6 +236,17 @@ struct dentry *ovl_i_dentry_upper(struct inode *inode)
return ovl_upperdentry_dereference(OVL_I(inode));
}
+void ovl_i_path_real(struct inode *inode, struct path *path)
+{
+ path->dentry = ovl_i_dentry_upper(inode);
+ if (!path->dentry) {
+ path->dentry = OVL_I(inode)->lowerpath.dentry;
+ path->mnt = OVL_I(inode)->lowerpath.layer->mnt;
+ } else {
+ path->mnt = ovl_upper_mnt(OVL_FS(inode->i_sb));
+ }
+}
+
struct inode *ovl_inode_upper(struct inode *inode)
{
struct dentry *upperdentry = ovl_i_dentry_upper(inode);
@@ -245,7 +256,9 @@ struct inode *ovl_inode_upper(struct inode *inode)
struct inode *ovl_inode_lower(struct inode *inode)
{
- return OVL_I(inode)->lower;
+ struct dentry *lowerdentry = OVL_I(inode)->lowerpath.dentry;
+
+ return lowerdentry ? d_inode(lowerdentry) : NULL;
}
struct inode *ovl_inode_real(struct inode *inode)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 064/731] ovl: use ovl_copy_{real,upper}attr() wrappers
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 063/731] ovl: store lower path in ovl_inode Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 065/731] ovl: remove privs in ovl_copyfile() Greg Kroah-Hartman
` (677 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, linux-unionfs, Giuseppe Scrivano,
Amir Goldstein, Christian Brauner (Microsoft),
Miklos Szeredi, Sasha Levin
From: Christian Brauner <brauner@kernel.org>
[ Upstream commit 2878dffc7db0b5a51e308ccb6b571296b57c82e7 ]
When copying inode attributes from the upper or lower layer to ovl inodes
we need to take the upper or lower layer's mount's idmapping into
account. In a lot of places we call ovl_copyattr() only on upper inodes and
in some we call it on either upper or lower inodes. Split this into two
separate helpers.
The first one should only be called on upper
inodes and is thus called ovl_copy_upperattr(). The second one can be
called on upper or lower inodes. We add ovl_copy_realattr() for this
task. The new helper makes use of the previously added ovl_i_path_real()
helper. This is needed to support idmapped base layers with overlay.
When overlay copies the inode information from an upper or lower layer
to the relevant overlay inode it will apply the idmapping of the upper
or lower layer when doing so. The ovl inode ownership will thus always
correctly reflect the ownership of the idmapped upper or lower layer.
All idmapping helpers are nops when no idmapped base layers are used.
Cc: <linux-unionfs@vger.kernel.org>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stable-dep-of: b306e90ffabd ("ovl: remove privs in ovl_copyfile()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/overlayfs/dir.c | 10 ++++------
fs/overlayfs/file.c | 15 +++++++--------
fs/overlayfs/inode.c | 8 ++++----
fs/overlayfs/overlayfs.h | 11 +----------
fs/overlayfs/util.c | 32 +++++++++++++++++++++++++++++++-
5 files changed, 47 insertions(+), 29 deletions(-)
diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c
index f18490813170..3fc86c51e260 100644
--- a/fs/overlayfs/dir.c
+++ b/fs/overlayfs/dir.c
@@ -880,7 +880,6 @@ static int ovl_do_remove(struct dentry *dentry, bool is_dir)
{
int err;
const struct cred *old_cred;
- struct dentry *upperdentry;
bool lower_positive = ovl_lower_positive(dentry);
LIST_HEAD(list);
@@ -923,9 +922,8 @@ static int ovl_do_remove(struct dentry *dentry, bool is_dir)
* Note: we fail to update ctime if there was no copy-up, only a
* whiteout
*/
- upperdentry = ovl_dentry_upper(dentry);
- if (upperdentry)
- ovl_copyattr(d_inode(upperdentry), d_inode(dentry));
+ if (ovl_dentry_upper(dentry))
+ ovl_copyattr(d_inode(dentry));
out_drop_write:
ovl_drop_write(dentry);
@@ -1272,9 +1270,9 @@ static int ovl_rename(struct user_namespace *mnt_userns, struct inode *olddir,
(d_inode(new) && ovl_type_origin(new)));
/* copy ctime: */
- ovl_copyattr(d_inode(olddentry), d_inode(old));
+ ovl_copyattr(d_inode(old));
if (d_inode(new) && ovl_dentry_upper(new))
- ovl_copyattr(d_inode(newdentry), d_inode(new));
+ ovl_copyattr(d_inode(new));
out_dput:
dput(newdentry);
diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c
index 44fea16751f1..535da9eb4d8b 100644
--- a/fs/overlayfs/file.c
+++ b/fs/overlayfs/file.c
@@ -273,7 +273,7 @@ static void ovl_aio_cleanup_handler(struct ovl_aio_req *aio_req)
__sb_writers_acquired(file_inode(iocb->ki_filp)->i_sb,
SB_FREEZE_WRITE);
file_end_write(iocb->ki_filp);
- ovl_copyattr(ovl_inode_real(inode), inode);
+ ovl_copyattr(inode);
}
orig_iocb->ki_pos = iocb->ki_pos;
@@ -356,7 +356,7 @@ static ssize_t ovl_write_iter(struct kiocb *iocb, struct iov_iter *iter)
inode_lock(inode);
/* Update mode */
- ovl_copyattr(ovl_inode_real(inode), inode);
+ ovl_copyattr(inode);
ret = file_remove_privs(file);
if (ret)
goto out_unlock;
@@ -381,7 +381,7 @@ static ssize_t ovl_write_iter(struct kiocb *iocb, struct iov_iter *iter)
ovl_iocb_to_rwf(ifl));
file_end_write(real.file);
/* Update size */
- ovl_copyattr(ovl_inode_real(inode), inode);
+ ovl_copyattr(inode);
} else {
struct ovl_aio_req *aio_req;
@@ -431,12 +431,11 @@ static ssize_t ovl_splice_write(struct pipe_inode_info *pipe, struct file *out,
struct fd real;
const struct cred *old_cred;
struct inode *inode = file_inode(out);
- struct inode *realinode = ovl_inode_real(inode);
ssize_t ret;
inode_lock(inode);
/* Update mode */
- ovl_copyattr(realinode, inode);
+ ovl_copyattr(inode);
ret = file_remove_privs(out);
if (ret)
goto out_unlock;
@@ -452,7 +451,7 @@ static ssize_t ovl_splice_write(struct pipe_inode_info *pipe, struct file *out,
file_end_write(real.file);
/* Update size */
- ovl_copyattr(realinode, inode);
+ ovl_copyattr(inode);
revert_creds(old_cred);
fdput(real);
@@ -526,7 +525,7 @@ static long ovl_fallocate(struct file *file, int mode, loff_t offset, loff_t len
revert_creds(old_cred);
/* Update size */
- ovl_copyattr(ovl_inode_real(inode), inode);
+ ovl_copyattr(inode);
fdput(real);
@@ -598,7 +597,7 @@ static loff_t ovl_copyfile(struct file *file_in, loff_t pos_in,
revert_creds(old_cred);
/* Update size */
- ovl_copyattr(ovl_inode_real(inode_out), inode_out);
+ ovl_copyattr(inode_out);
fdput(real_in);
fdput(real_out);
diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
index 06479bc88b7e..d41f0c8e0e2a 100644
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -80,7 +80,7 @@ int ovl_setattr(struct user_namespace *mnt_userns, struct dentry *dentry,
err = notify_change(&init_user_ns, upperdentry, attr, NULL);
revert_creds(old_cred);
if (!err)
- ovl_copyattr(upperdentry->d_inode, dentry->d_inode);
+ ovl_copyattr(dentry->d_inode);
inode_unlock(upperdentry->d_inode);
if (winode)
@@ -377,7 +377,7 @@ int ovl_xattr_set(struct dentry *dentry, struct inode *inode, const char *name,
revert_creds(old_cred);
/* copy c/mtime */
- ovl_copyattr(d_inode(realdentry), inode);
+ ovl_copyattr(inode);
out_drop_write:
ovl_drop_write(dentry);
@@ -579,7 +579,7 @@ int ovl_fileattr_set(struct user_namespace *mnt_userns,
inode_set_flags(inode, flags, OVL_COPY_I_FLAGS_MASK);
/* Update ctime */
- ovl_copyattr(ovl_inode_real(inode), inode);
+ ovl_copyattr(inode);
}
ovl_drop_write(dentry);
out:
@@ -789,7 +789,7 @@ void ovl_inode_init(struct inode *inode, struct ovl_inode_params *oip,
oi->lowerdata = igrab(d_inode(oip->lowerdata));
realinode = ovl_inode_real(inode);
- ovl_copyattr(realinode, inode);
+ ovl_copyattr(inode);
ovl_copyflags(realinode, inode);
ovl_map_ino(inode, ino, fsid);
}
diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h
index 27f221962665..2df3e74cdf0f 100644
--- a/fs/overlayfs/overlayfs.h
+++ b/fs/overlayfs/overlayfs.h
@@ -522,16 +522,7 @@ bool ovl_lookup_trap_inode(struct super_block *sb, struct dentry *dir);
struct inode *ovl_get_trap_inode(struct super_block *sb, struct dentry *dir);
struct inode *ovl_get_inode(struct super_block *sb,
struct ovl_inode_params *oip);
-static inline void ovl_copyattr(struct inode *from, struct inode *to)
-{
- to->i_uid = from->i_uid;
- to->i_gid = from->i_gid;
- to->i_mode = from->i_mode;
- to->i_atime = from->i_atime;
- to->i_mtime = from->i_mtime;
- to->i_ctime = from->i_ctime;
- i_size_write(to, i_size_read(from));
-}
+void ovl_copyattr(struct inode *to);
/* vfs inode flags copied from real to ovl inode */
#define OVL_COPY_I_FLAGS_MASK (S_SYNC | S_NOATIME | S_APPEND | S_IMMUTABLE)
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c
index 2567918dc684..9d33ce385bef 100644
--- a/fs/overlayfs/util.c
+++ b/fs/overlayfs/util.c
@@ -456,7 +456,7 @@ static void ovl_dir_version_inc(struct dentry *dentry, bool impurity)
void ovl_dir_modified(struct dentry *dentry, bool impurity)
{
/* Copy mtime/ctime */
- ovl_copyattr(d_inode(ovl_dentry_upper(dentry)), d_inode(dentry));
+ ovl_copyattr(d_inode(dentry));
ovl_dir_version_inc(dentry, impurity);
}
@@ -1073,3 +1073,33 @@ int ovl_sync_status(struct ovl_fs *ofs)
return errseq_check(&mnt->mnt_sb->s_wb_err, ofs->errseq);
}
+
+/*
+ * ovl_copyattr() - copy inode attributes from layer to ovl inode
+ *
+ * When overlay copies inode information from an upper or lower layer to the
+ * relevant overlay inode it will apply the idmapping of the upper or lower
+ * layer when doing so ensuring that the ovl inode ownership will correctly
+ * reflect the ownership of the idmapped upper or lower layer. For example, an
+ * idmapped upper or lower layer mapping id 1001 to id 1000 will take care to
+ * map any lower or upper inode owned by id 1001 to id 1000. These mapping
+ * helpers are nops when the relevant layer isn't idmapped.
+ */
+void ovl_copyattr(struct inode *inode)
+{
+ struct path realpath;
+ struct inode *realinode;
+ struct user_namespace *real_mnt_userns;
+
+ ovl_i_path_real(inode, &realpath);
+ realinode = d_inode(realpath.dentry);
+ real_mnt_userns = mnt_user_ns(realpath.mnt);
+
+ inode->i_uid = i_uid_into_mnt(real_mnt_userns, realinode);
+ inode->i_gid = i_gid_into_mnt(real_mnt_userns, realinode);
+ inode->i_mode = realinode->i_mode;
+ inode->i_atime = realinode->i_atime;
+ inode->i_mtime = realinode->i_mtime;
+ inode->i_ctime = realinode->i_ctime;
+ i_size_write(inode, i_size_read(realinode));
+}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 065/731] ovl: remove privs in ovl_copyfile()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 064/731] ovl: use ovl_copy_{real,upper}attr() wrappers Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 066/731] ovl: remove privs in ovl_fallocate() Greg Kroah-Hartman
` (676 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miklos Szeredi, Amir Goldstein,
Christian Brauner (Microsoft),
Sasha Levin
From: Amir Goldstein <amir73il@gmail.com>
[ Upstream commit b306e90ffabdaa7e3b3350dbcd19b7663e71ab17 ]
Underlying fs doesn't remove privs because copy_range/remap_range are
called with privileged mounter credentials.
This fixes some failures in fstest generic/673.
Fixes: 8ede205541ff ("ovl: add reflink/copyfile/dedup support")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/overlayfs/file.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c
index 535da9eb4d8b..b56e1f7a8c62 100644
--- a/fs/overlayfs/file.c
+++ b/fs/overlayfs/file.c
@@ -566,14 +566,23 @@ static loff_t ovl_copyfile(struct file *file_in, loff_t pos_in,
const struct cred *old_cred;
loff_t ret;
+ inode_lock(inode_out);
+ if (op != OVL_DEDUPE) {
+ /* Update mode */
+ ovl_copyattr(inode_out);
+ ret = file_remove_privs(file_out);
+ if (ret)
+ goto out_unlock;
+ }
+
ret = ovl_real_fdget(file_out, &real_out);
if (ret)
- return ret;
+ goto out_unlock;
ret = ovl_real_fdget(file_in, &real_in);
if (ret) {
fdput(real_out);
- return ret;
+ goto out_unlock;
}
old_cred = ovl_override_creds(file_inode(file_out)->i_sb);
@@ -602,6 +611,9 @@ static loff_t ovl_copyfile(struct file *file_in, loff_t pos_in,
fdput(real_in);
fdput(real_out);
+out_unlock:
+ inode_unlock(inode_out);
+
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 066/731] ovl: remove privs in ovl_fallocate()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 065/731] ovl: remove privs in ovl_copyfile() Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 067/731] sched/fair: Cleanup task_util and capacity type Greg Kroah-Hartman
` (675 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miklos Szeredi, Amir Goldstein,
Christian Brauner (Microsoft),
Sasha Levin
From: Amir Goldstein <amir73il@gmail.com>
[ Upstream commit 23a8ce16419a3066829ad4a8b7032a75817af65b ]
Underlying fs doesn't remove privs because fallocate is called with
privileged mounter credentials.
This fixes some failure in fstests generic/683..687.
Fixes: aab8848cee5e ("ovl: add ovl_fallocate()")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/overlayfs/file.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c
index b56e1f7a8c62..28cb05ef018c 100644
--- a/fs/overlayfs/file.c
+++ b/fs/overlayfs/file.c
@@ -516,9 +516,16 @@ static long ovl_fallocate(struct file *file, int mode, loff_t offset, loff_t len
const struct cred *old_cred;
int ret;
+ inode_lock(inode);
+ /* Update mode */
+ ovl_copyattr(inode);
+ ret = file_remove_privs(file);
+ if (ret)
+ goto out_unlock;
+
ret = ovl_real_fdget(file, &real);
if (ret)
- return ret;
+ goto out_unlock;
old_cred = ovl_override_creds(file_inode(file)->i_sb);
ret = vfs_fallocate(real.file, mode, offset, len);
@@ -529,6 +536,9 @@ static long ovl_fallocate(struct file *file, int mode, loff_t offset, loff_t len
fdput(real);
+out_unlock:
+ inode_unlock(inode);
+
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 067/731] sched/fair: Cleanup task_util and capacity type
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 066/731] ovl: remove privs in ovl_fallocate() Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 068/731] sched/uclamp: Fix relationship between uclamp and migration margin Greg Kroah-Hartman
` (674 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vincent Donnefort,
Peter Zijlstra (Intel),
Sasha Levin
From: Vincent Donnefort <vincent.donnefort@arm.com>
[ Upstream commit ef8df9798d469b7c45c66664550e93469749f1e8 ]
task_util and capacity are comparable unsigned long values. There is no
need for an intermidiate implicit signed cast.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211207095755.859972-1-vincent.donnefort@arm.com
Stable-dep-of: 48d5e9daa8b7 ("sched/uclamp: Fix relationship between uclamp and migration margin")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sched/fair.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index a853e4e9e3c3..999fcb460dfd 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -4120,7 +4120,8 @@ static inline void util_est_update(struct cfs_rq *cfs_rq,
trace_sched_util_est_se_tp(&p->se);
}
-static inline int task_fits_capacity(struct task_struct *p, long capacity)
+static inline int task_fits_capacity(struct task_struct *p,
+ unsigned long capacity)
{
return fits_capacity(uclamp_task_util(p), capacity);
}
@@ -6398,7 +6399,7 @@ select_idle_capacity(struct task_struct *p, struct sched_domain *sd, int target)
return best_cpu;
}
-static inline bool asym_fits_capacity(int task_util, int cpu)
+static inline bool asym_fits_capacity(unsigned long task_util, int cpu)
{
if (static_branch_unlikely(&sched_asym_cpucapacity))
return fits_capacity(task_util, capacity_of(cpu));
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 068/731] sched/uclamp: Fix relationship between uclamp and migration margin
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 067/731] sched/fair: Cleanup task_util and capacity type Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 069/731] sched/uclamp: Make task_fits_capacity() use util_fits_cpu() Greg Kroah-Hartman
` (673 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Qais Yousef, Peter Zijlstra (Intel),
Sasha Levin
From: Qais Yousef <qais.yousef@arm.com>
[ Upstream commit 48d5e9daa8b767e75ed9421665b037a49ce4bc04 ]
fits_capacity() verifies that a util is within 20% margin of the
capacity of a CPU, which is an attempt to speed up upmigration.
But when uclamp is used, this 20% margin is problematic because for
example if a task is boosted to 1024, then it will not fit on any CPU
according to fits_capacity() logic.
Or if a task is boosted to capacity_orig_of(medium_cpu). The task will
end up on big instead on the desired medium CPU.
Similar corner cases exist for uclamp and usage of capacity_of().
Slightest irq pressure on biggest CPU for example will make a 1024
boosted task look like it can't fit.
What we really want is for uclamp comparisons to ignore the migration
margin and capacity pressure, yet retain them for when checking the
_actual_ util signal.
For example, task p:
p->util_avg = 300
p->uclamp[UCLAMP_MIN] = 1024
Will fit a big CPU. But
p->util_avg = 900
p->uclamp[UCLAMP_MIN] = 1024
will not, this should trigger overutilized state because the big CPU is
now *actually* being saturated.
Similar reasoning applies to capping tasks with UCLAMP_MAX. For example:
p->util_avg = 1024
p->uclamp[UCLAMP_MAX] = capacity_orig_of(medium_cpu)
Should fit the task on medium cpus without triggering overutilized
state.
Inlined comments expand more on desired behavior in more scenarios.
Introduce new util_fits_cpu() function which encapsulates the new logic.
The new function is not used anywhere yet, but will be used to update
various users of fits_capacity() in later patches.
Fixes: af24bde8df202 ("sched/uclamp: Add uclamp support to energy_compute()")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-2-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sched/fair.c | 123 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 123 insertions(+)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 999fcb460dfd..951138dbf564 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -4120,6 +4120,129 @@ static inline void util_est_update(struct cfs_rq *cfs_rq,
trace_sched_util_est_se_tp(&p->se);
}
+static inline int util_fits_cpu(unsigned long util,
+ unsigned long uclamp_min,
+ unsigned long uclamp_max,
+ int cpu)
+{
+ unsigned long capacity_orig, capacity_orig_thermal;
+ unsigned long capacity = capacity_of(cpu);
+ bool fits, uclamp_max_fits;
+
+ /*
+ * Check if the real util fits without any uclamp boost/cap applied.
+ */
+ fits = fits_capacity(util, capacity);
+
+ if (!uclamp_is_used())
+ return fits;
+
+ /*
+ * We must use capacity_orig_of() for comparing against uclamp_min and
+ * uclamp_max. We only care about capacity pressure (by using
+ * capacity_of()) for comparing against the real util.
+ *
+ * If a task is boosted to 1024 for example, we don't want a tiny
+ * pressure to skew the check whether it fits a CPU or not.
+ *
+ * Similarly if a task is capped to capacity_orig_of(little_cpu), it
+ * should fit a little cpu even if there's some pressure.
+ *
+ * Only exception is for thermal pressure since it has a direct impact
+ * on available OPP of the system.
+ *
+ * We honour it for uclamp_min only as a drop in performance level
+ * could result in not getting the requested minimum performance level.
+ *
+ * For uclamp_max, we can tolerate a drop in performance level as the
+ * goal is to cap the task. So it's okay if it's getting less.
+ *
+ * In case of capacity inversion, which is not handled yet, we should
+ * honour the inverted capacity for both uclamp_min and uclamp_max all
+ * the time.
+ */
+ capacity_orig = capacity_orig_of(cpu);
+ capacity_orig_thermal = capacity_orig - arch_scale_thermal_pressure(cpu);
+
+ /*
+ * We want to force a task to fit a cpu as implied by uclamp_max.
+ * But we do have some corner cases to cater for..
+ *
+ *
+ * C=z
+ * | ___
+ * | C=y | |
+ * |_ _ _ _ _ _ _ _ _ ___ _ _ _ | _ | _ _ _ _ _ uclamp_max
+ * | C=x | | | |
+ * | ___ | | | |
+ * | | | | | | | (util somewhere in this region)
+ * | | | | | | |
+ * | | | | | | |
+ * +----------------------------------------
+ * cpu0 cpu1 cpu2
+ *
+ * In the above example if a task is capped to a specific performance
+ * point, y, then when:
+ *
+ * * util = 80% of x then it does not fit on cpu0 and should migrate
+ * to cpu1
+ * * util = 80% of y then it is forced to fit on cpu1 to honour
+ * uclamp_max request.
+ *
+ * which is what we're enforcing here. A task always fits if
+ * uclamp_max <= capacity_orig. But when uclamp_max > capacity_orig,
+ * the normal upmigration rules should withhold still.
+ *
+ * Only exception is when we are on max capacity, then we need to be
+ * careful not to block overutilized state. This is so because:
+ *
+ * 1. There's no concept of capping at max_capacity! We can't go
+ * beyond this performance level anyway.
+ * 2. The system is being saturated when we're operating near
+ * max capacity, it doesn't make sense to block overutilized.
+ */
+ uclamp_max_fits = (capacity_orig == SCHED_CAPACITY_SCALE) && (uclamp_max == SCHED_CAPACITY_SCALE);
+ uclamp_max_fits = !uclamp_max_fits && (uclamp_max <= capacity_orig);
+ fits = fits || uclamp_max_fits;
+
+ /*
+ *
+ * C=z
+ * | ___ (region a, capped, util >= uclamp_max)
+ * | C=y | |
+ * |_ _ _ _ _ _ _ _ _ ___ _ _ _ | _ | _ _ _ _ _ uclamp_max
+ * | C=x | | | |
+ * | ___ | | | | (region b, uclamp_min <= util <= uclamp_max)
+ * |_ _ _|_ _|_ _ _ _| _ | _ _ _| _ | _ _ _ _ _ uclamp_min
+ * | | | | | | |
+ * | | | | | | | (region c, boosted, util < uclamp_min)
+ * +----------------------------------------
+ * cpu0 cpu1 cpu2
+ *
+ * a) If util > uclamp_max, then we're capped, we don't care about
+ * actual fitness value here. We only care if uclamp_max fits
+ * capacity without taking margin/pressure into account.
+ * See comment above.
+ *
+ * b) If uclamp_min <= util <= uclamp_max, then the normal
+ * fits_capacity() rules apply. Except we need to ensure that we
+ * enforce we remain within uclamp_max, see comment above.
+ *
+ * c) If util < uclamp_min, then we are boosted. Same as (b) but we
+ * need to take into account the boosted value fits the CPU without
+ * taking margin/pressure into account.
+ *
+ * Cases (a) and (b) are handled in the 'fits' variable already. We
+ * just need to consider an extra check for case (c) after ensuring we
+ * handle the case uclamp_min > uclamp_max.
+ */
+ uclamp_min = min(uclamp_min, uclamp_max);
+ if (util < uclamp_min && capacity_orig != SCHED_CAPACITY_SCALE)
+ fits = fits && (uclamp_min <= capacity_orig_thermal);
+
+ return fits;
+}
+
static inline int task_fits_capacity(struct task_struct *p,
unsigned long capacity)
{
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 069/731] sched/uclamp: Make task_fits_capacity() use util_fits_cpu()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 068/731] sched/uclamp: Fix relationship between uclamp and migration margin Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 070/731] sched/uclamp: Make select_idle_capacity() " Greg Kroah-Hartman
` (672 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Qais Yousef, Peter Zijlstra (Intel),
Sasha Levin, Vincent Guittot
From: Qais Yousef <qais.yousef@arm.com>
[ Upstream commit b48e16a69792b5dc4a09d6807369d11b2970cc36 ]
So that the new uclamp rules in regard to migration margin and capacity
pressure are taken into account correctly.
Fixes: a7008c07a568 ("sched/fair: Make task_fits_capacity() consider uclamp restrictions")
Co-developed-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-3-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sched/fair.c | 26 ++++++++++++++++----------
kernel/sched/sched.h | 9 +++++++++
2 files changed, 25 insertions(+), 10 deletions(-)
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -4243,10 +4243,12 @@ static inline int util_fits_cpu(unsigned
return fits;
}
-static inline int task_fits_capacity(struct task_struct *p,
- unsigned long capacity)
+static inline int task_fits_cpu(struct task_struct *p, int cpu)
{
- return fits_capacity(uclamp_task_util(p), capacity);
+ unsigned long uclamp_min = uclamp_eff_value(p, UCLAMP_MIN);
+ unsigned long uclamp_max = uclamp_eff_value(p, UCLAMP_MAX);
+ unsigned long util = task_util_est(p);
+ return util_fits_cpu(util, uclamp_min, uclamp_max, cpu);
}
static inline void update_misfit_status(struct task_struct *p, struct rq *rq)
@@ -4259,7 +4261,7 @@ static inline void update_misfit_status(
return;
}
- if (task_fits_capacity(p, capacity_of(cpu_of(rq)))) {
+ if (task_fits_cpu(p, cpu_of(rq))) {
rq->misfit_task_load = 0;
return;
}
@@ -8157,7 +8159,7 @@ static int detach_tasks(struct lb_env *e
case migrate_misfit:
/* This is not a misfit task */
- if (task_fits_capacity(p, capacity_of(env->src_cpu)))
+ if (task_fits_cpu(p, env->src_cpu))
goto next;
env->imbalance = 0;
@@ -9042,6 +9044,10 @@ static inline void update_sg_wakeup_stat
memset(sgs, 0, sizeof(*sgs));
+ /* Assume that task can't fit any CPU of the group */
+ if (sd->flags & SD_ASYM_CPUCAPACITY)
+ sgs->group_misfit_task_load = 1;
+
for_each_cpu(i, sched_group_span(group)) {
struct rq *rq = cpu_rq(i);
unsigned int local;
@@ -9061,12 +9067,12 @@ static inline void update_sg_wakeup_stat
if (!nr_running && idle_cpu_without(i, p))
sgs->idle_cpus++;
- }
+ /* Check if task fits in the CPU */
+ if (sd->flags & SD_ASYM_CPUCAPACITY &&
+ sgs->group_misfit_task_load &&
+ task_fits_cpu(p, i))
+ sgs->group_misfit_task_load = 0;
- /* Check if task fits in the group */
- if (sd->flags & SD_ASYM_CPUCAPACITY &&
- !task_fits_capacity(p, group->sgc->max_capacity)) {
- sgs->group_misfit_task_load = 1;
}
sgs->group_capacity = group->sgc->capacity;
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -2916,6 +2916,15 @@ static inline bool uclamp_is_used(void)
return static_branch_likely(&sched_uclamp_used);
}
#else /* CONFIG_UCLAMP_TASK */
+static inline unsigned long uclamp_eff_value(struct task_struct *p,
+ enum uclamp_id clamp_id)
+{
+ if (clamp_id == UCLAMP_MIN)
+ return 0;
+
+ return SCHED_CAPACITY_SCALE;
+}
+
static inline
unsigned long uclamp_rq_util_with(struct rq *rq, unsigned long util,
struct task_struct *p)
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 070/731] sched/uclamp: Make select_idle_capacity() use util_fits_cpu()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 069/731] sched/uclamp: Make task_fits_capacity() use util_fits_cpu() Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 071/731] sched/fair: Removed useless update of p->recent_used_cpu Greg Kroah-Hartman
` (671 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Qais Yousef, Peter Zijlstra (Intel),
Sasha Levin
From: Qais Yousef <qais.yousef@arm.com>
[ Upstream commit b759caa1d9f667b94727b2ad12589cbc4ce13a82 ]
Use the new util_fits_cpu() to ensure migration margin and capacity
pressure are taken into account correctly when uclamp is being used
otherwise we will fail to consider CPUs as fitting in scenarios where
they should.
Fixes: b4c9c9f15649 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-5-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sched/fair.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index a4c71dfae95e..9e2c6e38342c 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -6498,21 +6498,23 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
static int
select_idle_capacity(struct task_struct *p, struct sched_domain *sd, int target)
{
- unsigned long task_util, best_cap = 0;
+ unsigned long task_util, util_min, util_max, best_cap = 0;
int cpu, best_cpu = -1;
struct cpumask *cpus;
cpus = this_cpu_cpumask_var_ptr(select_idle_mask);
cpumask_and(cpus, sched_domain_span(sd), p->cpus_ptr);
- task_util = uclamp_task_util(p);
+ task_util = task_util_est(p);
+ util_min = uclamp_eff_value(p, UCLAMP_MIN);
+ util_max = uclamp_eff_value(p, UCLAMP_MAX);
for_each_cpu_wrap(cpu, cpus, target) {
unsigned long cpu_cap = capacity_of(cpu);
if (!available_idle_cpu(cpu) && !sched_idle_cpu(cpu))
continue;
- if (fits_capacity(task_util, cpu_cap))
+ if (util_fits_cpu(task_util, util_min, util_max, cpu))
return cpu;
if (cpu_cap > best_cap) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 071/731] sched/fair: Removed useless update of p->recent_used_cpu
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 070/731] sched/uclamp: Make select_idle_capacity() " Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 072/731] sched/core: Introduce sched_asym_cpucap_active() Greg Kroah-Hartman
` (670 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vincent Guittot,
Peter Zijlstra (Intel),
Mel Gorman, Sasha Levin
From: Vincent Guittot <vincent.guittot@linaro.org>
[ Upstream commit a7ba894821b6ade7bb420455f87020b2838d6180 ]
Since commit 89aafd67f28c ("sched/fair: Use prev instead of new target as recent_used_cpu"),
p->recent_used_cpu is unconditionnaly set with prev.
Fixes: 89aafd67f28c ("sched/fair: Use prev instead of new target as recent_used_cpu")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210928103544.27489-1-vincent.guittot@linaro.org
Stable-dep-of: a2e7f03ed28f ("sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sched/fair.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 9e2c6e38342c..d706c1a8453a 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -6595,11 +6595,6 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
(available_idle_cpu(recent_used_cpu) || sched_idle_cpu(recent_used_cpu)) &&
cpumask_test_cpu(p->recent_used_cpu, p->cpus_ptr) &&
asym_fits_capacity(task_util, recent_used_cpu)) {
- /*
- * Replace recent_used_cpu with prev as it is a potential
- * candidate for the next wake:
- */
- p->recent_used_cpu = prev;
return recent_used_cpu;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 072/731] sched/core: Introduce sched_asym_cpucap_active()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 071/731] sched/fair: Removed useless update of p->recent_used_cpu Greg Kroah-Hartman
@ 2022-12-28 14:32 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 073/731] sched/uclamp: Make asym_fits_capacity() use util_fits_cpu() Greg Kroah-Hartman
` (669 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:32 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dietmar Eggemann, Ingo Molnar, Sasha Levin
From: Dietmar Eggemann <dietmar.eggemann@arm.com>
[ Upstream commit 740cf8a760b73e8375bfb4bedcbe9746183350f9 ]
Create an inline helper for conditional code to be only executed on
asymmetric CPU capacity systems. This makes these (currently ~10 and
future) conditions a lot more readable.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20220729111305.1275158-2-dietmar.eggemann@arm.com
Stable-dep-of: a2e7f03ed28f ("sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sched/cpudeadline.c | 2 +-
kernel/sched/deadline.c | 4 ++--
kernel/sched/fair.c | 8 ++++----
kernel/sched/rt.c | 4 ++--
kernel/sched/sched.h | 5 +++++
5 files changed, 14 insertions(+), 9 deletions(-)
diff --git a/kernel/sched/cpudeadline.c b/kernel/sched/cpudeadline.c
index ceb03d76c0cc..221ca1050573 100644
--- a/kernel/sched/cpudeadline.c
+++ b/kernel/sched/cpudeadline.c
@@ -124,7 +124,7 @@ int cpudl_find(struct cpudl *cp, struct task_struct *p,
unsigned long cap, max_cap = 0;
int cpu, max_cpu = -1;
- if (!static_branch_unlikely(&sched_asym_cpucapacity))
+ if (!sched_asym_cpucap_active())
return 1;
/* Ensure the capacity of the CPUs fits the task. */
diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
index 147b757d162b..2a2f32eaffcc 100644
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -112,7 +112,7 @@ static inline unsigned long __dl_bw_capacity(int i)
*/
static inline unsigned long dl_bw_capacity(int i)
{
- if (!static_branch_unlikely(&sched_asym_cpucapacity) &&
+ if (!sched_asym_cpucap_active() &&
capacity_orig_of(i) == SCHED_CAPACITY_SCALE) {
return dl_bw_cpus(i) << SCHED_CAPACITY_SHIFT;
} else {
@@ -1703,7 +1703,7 @@ select_task_rq_dl(struct task_struct *p, int cpu, int flags)
* Take the capacity of the CPU into account to
* ensure it fits the requirement of the task.
*/
- if (static_branch_unlikely(&sched_asym_cpucapacity))
+ if (sched_asym_cpucap_active())
select_rq |= !dl_task_fits_capacity(p, cpu);
if (select_rq) {
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index d706c1a8453a..619fc7bd65e2 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -4253,7 +4253,7 @@ static inline int task_fits_cpu(struct task_struct *p, int cpu)
static inline void update_misfit_status(struct task_struct *p, struct rq *rq)
{
- if (!static_branch_unlikely(&sched_asym_cpucapacity))
+ if (!sched_asym_cpucap_active())
return;
if (!p || p->nr_cpus_allowed == 1) {
@@ -6528,7 +6528,7 @@ select_idle_capacity(struct task_struct *p, struct sched_domain *sd, int target)
static inline bool asym_fits_capacity(unsigned long task_util, int cpu)
{
- if (static_branch_unlikely(&sched_asym_cpucapacity))
+ if (sched_asym_cpucap_active())
return fits_capacity(task_util, capacity_of(cpu));
return true;
@@ -6548,7 +6548,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
* On asymmetric system, update task utilization because we will check
* that the task fits with cpu's capacity.
*/
- if (static_branch_unlikely(&sched_asym_cpucapacity)) {
+ if (sched_asym_cpucap_active()) {
sync_entity_load_avg(&p->se);
task_util = uclamp_task_util(p);
}
@@ -6602,7 +6602,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
* For asymmetric CPU capacity systems, our domain of interest is
* sd_asym_cpucapacity rather than sd_llc.
*/
- if (static_branch_unlikely(&sched_asym_cpucapacity)) {
+ if (sched_asym_cpucap_active()) {
sd = rcu_dereference(per_cpu(sd_asym_cpucapacity, target));
/*
* On an asymmetric CPU capacity system where an exclusive
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index f75dcd3537b8..add67f811e00 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -473,7 +473,7 @@ static inline bool rt_task_fits_capacity(struct task_struct *p, int cpu)
unsigned int cpu_cap;
/* Only heterogeneous systems can benefit from this check */
- if (!static_branch_unlikely(&sched_asym_cpucapacity))
+ if (!sched_asym_cpucap_active())
return true;
min_cap = uclamp_eff_value(p, UCLAMP_MIN);
@@ -1736,7 +1736,7 @@ static int find_lowest_rq(struct task_struct *task)
* If we're on asym system ensure we consider the different capacities
* of the CPUs when searching for the lowest_mask.
*/
- if (static_branch_unlikely(&sched_asym_cpucapacity)) {
+ if (sched_asym_cpucap_active()) {
ret = cpupri_find_fitness(&task_rq(task)->rd->cpupri,
task, lowest_mask,
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 4a98bb9fd881..fffb45bdddcc 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1788,6 +1788,11 @@ DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
extern struct static_key_false sched_asym_cpucapacity;
+static __always_inline bool sched_asym_cpucap_active(void)
+{
+ return static_branch_unlikely(&sched_asym_cpucapacity);
+}
+
struct sched_group_capacity {
atomic_t ref;
/*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 073/731] sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2022-12-28 14:32 ` [PATCH 5.15 072/731] sched/core: Introduce sched_asym_cpucap_active() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 074/731] cpuidle: dt: Return the correct numbers of parsed idle states Greg Kroah-Hartman
` (668 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Qais Yousef, Peter Zijlstra (Intel),
Sasha Levin
From: Qais Yousef <qais.yousef@arm.com>
[ Upstream commit a2e7f03ed28fce26c78b985f87913b6ce3accf9d ]
Use the new util_fits_cpu() to ensure migration margin and capacity
pressure are taken into account correctly when uclamp is being used
otherwise we will fail to consider CPUs as fitting in scenarios where
they should.
s/asym_fits_capacity/asym_fits_cpu/ to better reflect what it does now.
Fixes: b4c9c9f15649 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-6-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sched/fair.c | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 619fc7bd65e2..6648683cd964 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -6526,10 +6526,13 @@ select_idle_capacity(struct task_struct *p, struct sched_domain *sd, int target)
return best_cpu;
}
-static inline bool asym_fits_capacity(unsigned long task_util, int cpu)
+static inline bool asym_fits_cpu(unsigned long util,
+ unsigned long util_min,
+ unsigned long util_max,
+ int cpu)
{
if (sched_asym_cpucap_active())
- return fits_capacity(task_util, capacity_of(cpu));
+ return util_fits_cpu(util, util_min, util_max, cpu);
return true;
}
@@ -6541,7 +6544,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
{
bool has_idle_core = false;
struct sched_domain *sd;
- unsigned long task_util;
+ unsigned long task_util, util_min, util_max;
int i, recent_used_cpu;
/*
@@ -6550,7 +6553,9 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
*/
if (sched_asym_cpucap_active()) {
sync_entity_load_avg(&p->se);
- task_util = uclamp_task_util(p);
+ task_util = task_util_est(p);
+ util_min = uclamp_eff_value(p, UCLAMP_MIN);
+ util_max = uclamp_eff_value(p, UCLAMP_MAX);
}
/*
@@ -6559,7 +6564,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
lockdep_assert_irqs_disabled();
if ((available_idle_cpu(target) || sched_idle_cpu(target)) &&
- asym_fits_capacity(task_util, target))
+ asym_fits_cpu(task_util, util_min, util_max, target))
return target;
/*
@@ -6567,7 +6572,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
*/
if (prev != target && cpus_share_cache(prev, target) &&
(available_idle_cpu(prev) || sched_idle_cpu(prev)) &&
- asym_fits_capacity(task_util, prev))
+ asym_fits_cpu(task_util, util_min, util_max, prev))
return prev;
/*
@@ -6582,7 +6587,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
in_task() &&
prev == smp_processor_id() &&
this_rq()->nr_running <= 1 &&
- asym_fits_capacity(task_util, prev)) {
+ asym_fits_cpu(task_util, util_min, util_max, prev)) {
return prev;
}
@@ -6594,7 +6599,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
cpus_share_cache(recent_used_cpu, target) &&
(available_idle_cpu(recent_used_cpu) || sched_idle_cpu(recent_used_cpu)) &&
cpumask_test_cpu(p->recent_used_cpu, p->cpus_ptr) &&
- asym_fits_capacity(task_util, recent_used_cpu)) {
+ asym_fits_cpu(task_util, util_min, util_max, recent_used_cpu)) {
return recent_used_cpu;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 074/731] cpuidle: dt: Return the correct numbers of parsed idle states
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 073/731] sched/uclamp: Make asym_fits_capacity() use util_fits_cpu() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 075/731] alpha: fix TIF_NOTIFY_SIGNAL handling Greg Kroah-Hartman
` (667 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ulf Hansson, Sudeep Holla,
Rafael J. Wysocki, Sasha Levin
From: Ulf Hansson <ulf.hansson@linaro.org>
[ Upstream commit ee3c2c8ad6ba6785f14a60e4081d7c82e88162a2 ]
While we correctly skips to initialize an idle state from a disabled idle
state node in DT, the returned value from dt_init_idle_driver() don't get
adjusted accordingly. Instead the number of found idle state nodes are
returned, while the callers are expecting the number of successfully
initialized idle states from DT.
This leads to cpuidle drivers unnecessarily continues to initialize their
idle state specific data. Moreover, in the case when all idle states have
been disabled in DT, we would end up registering a cpuidle driver, rather
than relying on the default arch specific idle call.
Fixes: 9f14da345599 ("drivers: cpuidle: implement DT based idle states infrastructure")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpuidle/dt_idle_states.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/cpuidle/dt_idle_states.c b/drivers/cpuidle/dt_idle_states.c
index 252f2a9686a6..448bc796b0b4 100644
--- a/drivers/cpuidle/dt_idle_states.c
+++ b/drivers/cpuidle/dt_idle_states.c
@@ -223,6 +223,6 @@ int dt_init_idle_driver(struct cpuidle_driver *drv,
* also be 0 on platforms with missing DT idle states or legacy DT
* configuration predating the DT idle states bindings.
*/
- return i;
+ return state_idx - start_idx;
}
EXPORT_SYMBOL_GPL(dt_init_idle_driver);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 075/731] alpha: fix TIF_NOTIFY_SIGNAL handling
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 074/731] cpuidle: dt: Return the correct numbers of parsed idle states Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 076/731] alpha: fix syscall entry in !AUDUT_SYSCALL case Greg Kroah-Hartman
` (666 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Al Viro, Sasha Levin
From: Al Viro <viro@zeniv.linux.org.uk>
[ Upstream commit e2c7554cc6d85f95e3c6635f270ec839ab9fe05e ]
it needs to be added to _TIF_WORK_MASK, or we might not reach
do_work_pending() in the first place...
Fixes: 5a9a8897c253a "alpha: add support for TIF_NOTIFY_SIGNAL"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/alpha/include/asm/thread_info.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 2592356e3215..0ce1eee0924b 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -77,7 +77,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
/* Work to do on interrupt/exception return. */
#define _TIF_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
- _TIF_NOTIFY_RESUME)
+ _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
/* Work to do on any return to userspace. */
#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK \
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 076/731] alpha: fix syscall entry in !AUDUT_SYSCALL case
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 075/731] alpha: fix TIF_NOTIFY_SIGNAL handling Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 077/731] x86/sgx: Reduce delay and interference of enclave release Greg Kroah-Hartman
` (665 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Al Viro, Sasha Levin
From: Al Viro <viro@zeniv.linux.org.uk>
[ Upstream commit f7b2431a6d22f7a91c567708e071dfcd6d66db14 ]
We only want to take the slow path if SYSCALL_TRACE or SYSCALL_AUDIT is
set; on !AUDIT_SYSCALL configs the current tree hits it whenever _any_
thread flag (including NEED_RESCHED, NOTIFY_SIGNAL, etc.) happens to
be set.
Fixes: a9302e843944 "alpha: Enable system-call auditing support"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/alpha/kernel/entry.S | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index e227f3a29a43..c41a5a9c3b9f 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -469,8 +469,10 @@ entSys:
#ifdef CONFIG_AUDITSYSCALL
lda $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
and $3, $6, $3
-#endif
bne $3, strace
+#else
+ blbs $3, strace /* check for SYSCALL_TRACE in disguise */
+#endif
beq $4, 1f
ldq $27, 0($5)
1: jsr $26, ($27), sys_ni_syscall
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 077/731] x86/sgx: Reduce delay and interference of enclave release
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 076/731] alpha: fix syscall entry in !AUDUT_SYSCALL case Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 078/731] PM: hibernate: Fix mistake in kerneldoc comment Greg Kroah-Hartman
` (664 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Md Iqbal Hossain, Reinette Chatre,
Dave Hansen, Sasha Levin
From: Reinette Chatre <reinette.chatre@intel.com>
[ Upstream commit 7b72c823ddf8aaaec4e9fb28e6fbe4d511e7dad1 ]
commit 8795359e35bc ("x86/sgx: Silence softlockup detection when
releasing large enclaves") introduced a cond_resched() during enclave
release where the EREMOVE instruction is applied to every 4k enclave
page. Giving other tasks an opportunity to run while tearing down a
large enclave placates the soft lockup detector but Iqbal found
that the fix causes a 25% performance degradation of a workload
run using Gramine.
Gramine maintains a 1:1 mapping between processes and SGX enclaves.
That means if a workload in an enclave creates a subprocess then
Gramine creates a duplicate enclave for that subprocess to run in.
The consequence is that the release of the enclave used to run
the subprocess can impact the performance of the workload that is
run in the original enclave, especially in large enclaves when
SGX2 is not in use.
The workload run by Iqbal behaves as follows:
Create enclave (enclave "A")
/* Initialize workload in enclave "A" */
Create enclave (enclave "B")
/* Run subprocess in enclave "B" and send result to enclave "A" */
Release enclave (enclave "B")
/* Run workload in enclave "A" */
Release enclave (enclave "A")
The performance impact of releasing enclave "B" in the above scenario
is amplified when there is a lot of SGX memory and the enclave size
matches the SGX memory. When there is 128GB SGX memory and an enclave
size of 128GB, from the time enclave "B" starts the 128GB SGX memory
is oversubscribed with a combined demand for 256GB from the two
enclaves.
Before commit 8795359e35bc ("x86/sgx: Silence softlockup detection when
releasing large enclaves") enclave release was done in a tight loop
without giving other tasks a chance to run. Even though the system
experienced soft lockups the workload (run in enclave "A") obtained
good performance numbers because when the workload started running
there was no interference.
Commit 8795359e35bc ("x86/sgx: Silence softlockup detection when
releasing large enclaves") gave other tasks opportunity to run while an
enclave is released. The impact of this in this scenario is that while
enclave "B" is released and needing to access each page that belongs
to it in order to run the SGX EREMOVE instruction on it, enclave "A"
is attempting to run the workload needing to access the enclave
pages that belong to it. This causes a lot of swapping due to the
demand for the oversubscribed SGX memory. Longer latencies are
experienced by the workload in enclave "A" while enclave "B" is
released.
Improve the performance of enclave release while still avoiding the
soft lockup detector with two enhancements:
- Only call cond_resched() after XA_CHECK_SCHED iterations.
- Use the xarray advanced API to keep the xarray locked for
XA_CHECK_SCHED iterations instead of locking and unlocking
at every iteration.
This batching solution is copied from sgx_encl_may_map() that
also iterates through all enclave pages using this technique.
With this enhancement the workload experiences a 5%
performance degradation when compared to a kernel without
commit 8795359e35bc ("x86/sgx: Silence softlockup detection when
releasing large enclaves"), an improvement to the reported 25%
degradation, while still placating the soft lockup detector.
Scenarios with poor performance are still possible even with these
enhancements. For example, short workloads creating sub processes
while running in large enclaves. Further performance improvements
are pursued in user space through avoiding to create duplicate enclaves
for certain sub processes, and using SGX2 that will do lazy allocation
of pages as needed so enclaves created for sub processes start quickly
and release quickly.
Fixes: 8795359e35bc ("x86/sgx: Silence softlockup detection when releasing large enclaves")
Reported-by: Md Iqbal Hossain <md.iqbal.hossain@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Md Iqbal Hossain <md.iqbal.hossain@intel.com>
Link: https://lore.kernel.org/all/00efa80dd9e35dc85753e1c5edb0344ac07bb1f0.1667236485.git.reinette.chatre%40intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/cpu/sgx/encl.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kernel/cpu/sgx/encl.c b/arch/x86/kernel/cpu/sgx/encl.c
index 19876ebfb504..fa5777af8da1 100644
--- a/arch/x86/kernel/cpu/sgx/encl.c
+++ b/arch/x86/kernel/cpu/sgx/encl.c
@@ -533,11 +533,15 @@ const struct vm_operations_struct sgx_vm_ops = {
void sgx_encl_release(struct kref *ref)
{
struct sgx_encl *encl = container_of(ref, struct sgx_encl, refcount);
+ unsigned long max_page_index = PFN_DOWN(encl->base + encl->size - 1);
struct sgx_va_page *va_page;
struct sgx_encl_page *entry;
- unsigned long index;
+ unsigned long count = 0;
+
+ XA_STATE(xas, &encl->page_array, PFN_DOWN(encl->base));
- xa_for_each(&encl->page_array, index, entry) {
+ xas_lock(&xas);
+ xas_for_each(&xas, entry, max_page_index) {
if (entry->epc_page) {
/*
* The page and its radix tree entry cannot be freed
@@ -552,9 +556,20 @@ void sgx_encl_release(struct kref *ref)
}
kfree(entry);
- /* Invoke scheduler to prevent soft lockups. */
- cond_resched();
+ /*
+ * Invoke scheduler on every XA_CHECK_SCHED iteration
+ * to prevent soft lockups.
+ */
+ if (!(++count % XA_CHECK_SCHED)) {
+ xas_pause(&xas);
+ xas_unlock(&xas);
+
+ cond_resched();
+
+ xas_lock(&xas);
+ }
}
+ xas_unlock(&xas);
xa_destroy(&encl->page_array);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 078/731] PM: hibernate: Fix mistake in kerneldoc comment
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 077/731] x86/sgx: Reduce delay and interference of enclave release Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 079/731] fs: dont audit the capability check in simple_xattr_list() Greg Kroah-Hartman
` (663 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, xiongxin, Rafael J. Wysocki, Sasha Levin
From: xiongxin <xiongxin@kylinos.cn>
[ Upstream commit 6e5d7300cbe7c3541bc31f16db3e9266e6027b4b ]
The actual maximum image size formula in hibernate_preallocate_memory()
is as follows:
max_size = (count - (size + PAGES_FOR_IO)) / 2
- 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE);
but the one in the kerneldoc comment of the function is different and
incorrect.
Fixes: ddeb64870810 ("PM / Hibernate: Add sysfs knob to control size of memory for drivers")
Signed-off-by: xiongxin <xiongxin@kylinos.cn>
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/power/snapshot.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 330d49937692..475d630e650f 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -1719,8 +1719,8 @@ static unsigned long minimum_image_size(unsigned long saveable)
* /sys/power/reserved_size, respectively). To make this happen, we compute the
* total number of available page frames and allocate at least
*
- * ([page frames total] + PAGES_FOR_IO + [metadata pages]) / 2
- * + 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE)
+ * ([page frames total] - PAGES_FOR_IO - [metadata pages]) / 2
+ * - 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE)
*
* of them, which corresponds to the maximum size of a hibernation image.
*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 079/731] fs: dont audit the capability check in simple_xattr_list()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 078/731] PM: hibernate: Fix mistake in kerneldoc comment Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 080/731] cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut() Greg Kroah-Hartman
` (662 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Martin Pitt,
Christian Brauner (Microsoft),
Ondrej Mosnacek, Paul Moore, Sasha Levin
From: Ondrej Mosnacek <omosnace@redhat.com>
[ Upstream commit e7eda157c4071cd1e69f4b1687b0fbe1ae5e6f46 ]
The check being unconditional may lead to unwanted denials reported by
LSMs when a process has the capability granted by DAC, but denied by an
LSM. In the case of SELinux such denials are a problem, since they can't
be effectively filtered out via the policy and when not silenced, they
produce noise that may hide a true problem or an attack.
Checking for the capability only if any trusted xattr is actually
present wouldn't really address the issue, since calling listxattr(2) on
such node on its own doesn't indicate an explicit attempt to see the
trusted xattrs. Additionally, it could potentially leak the presence of
trusted xattrs to an unprivileged user if they can check for the denials
(e.g. through dmesg).
Therefore, it's best (and simplest) to keep the check unconditional and
instead use ns_capable_noaudit() that will silence any associated LSM
denials.
Fixes: 38f38657444d ("xattr: extract simple_xattr code from tmpfs")
Reported-by: Martin Pitt <mpitt@redhat.com>
Suggested-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/xattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/xattr.c b/fs/xattr.c
index 7117cb253864..4c82f271f4aa 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -1119,7 +1119,7 @@ static int xattr_list_one(char **buffer, ssize_t *remaining_size,
ssize_t simple_xattr_list(struct inode *inode, struct simple_xattrs *xattrs,
char *buffer, size_t size)
{
- bool trusted = capable(CAP_SYS_ADMIN);
+ bool trusted = ns_capable_noaudit(&init_user_ns, CAP_SYS_ADMIN);
struct simple_xattr *xattr;
ssize_t remaining_size = size;
int err = 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 080/731] cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 079/731] fs: dont audit the capability check in simple_xattr_list() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 081/731] selftests/ftrace: event_triggers: wait longer for test_event_enable Greg Kroah-Hartman
` (661 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen Hui, Sibi Sankar, Viresh Kumar,
Sasha Levin
From: Chen Hui <judy.chenhui@huawei.com>
[ Upstream commit 9901c21bcaf2f01fe5078f750d624f4ddfa8f81b ]
If "cpu_dev" fails to get opp table in qcom_cpufreq_hw_read_lut(),
the program will return, resulting in "table" resource is not released.
Fixes: 51c843cf77bb ("cpufreq: qcom: Update the bandwidth levels on frequency change")
Signed-off-by: Chen Hui <judy.chenhui@huawei.com>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpufreq/qcom-cpufreq-hw.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index bb2f59fd0de4..bbcba2c38e85 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -177,6 +177,7 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
}
} else if (ret != -ENODEV) {
dev_err(cpu_dev, "Invalid opp table in device tree\n");
+ kfree(table);
return ret;
} else {
policy->fast_switch_possible = true;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 081/731] selftests/ftrace: event_triggers: wait longer for test_event_enable
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 080/731] cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 082/731] perf: Fix possible memleak in pmu_dev_alloc() Greg Kroah-Hartman
` (660 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yipeng Zou,
Masami Hiramatsu (Google), Steven Rostedt (Google),
Shuah Khan, Sasha Levin
From: Yipeng Zou <zouyipeng@huawei.com>
[ Upstream commit a1d6cd88c8973cfb08ee85722488b1d6d5d16327 ]
In some platform, the schedule event may came slowly, delay 100ms can't
cover it.
I was notice that on my board which running in low cpu_freq,and this
selftests allways gose fail.
So maybe we can check more times here to wait longer.
Fixes: 43bb45da82f9 ("selftests: ftrace: Add a selftest to test event enable/disable func trigger")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../ftrace/test.d/ftrace/func_event_triggers.tc | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc
index 3145b0f1835c..27a68bbe778b 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc
@@ -38,11 +38,18 @@ cnt_trace() {
test_event_enabled() {
val=$1
+ check_times=10 # wait for 10 * SLEEP_TIME at most
- e=`cat $EVENT_ENABLE`
- if [ "$e" != $val ]; then
- fail "Expected $val but found $e"
- fi
+ while [ $check_times -ne 0 ]; do
+ e=`cat $EVENT_ENABLE`
+ if [ "$e" == $val ]; then
+ return 0
+ fi
+ sleep $SLEEP_TIME
+ check_times=$((check_times - 1))
+ done
+
+ fail "Expected $val but found $e"
}
run_enable_disable() {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 082/731] perf: Fix possible memleak in pmu_dev_alloc()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 081/731] selftests/ftrace: event_triggers: wait longer for test_event_enable Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 083/731] lib/debugobjects: fix stat count and optimize debug_objects_mem_init Greg Kroah-Hartman
` (659 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen Zhongjin,
Peter Zijlstra (Intel),
Sasha Levin
From: Chen Zhongjin <chenzhongjin@huawei.com>
[ Upstream commit e8d7a90c08ce963c592fb49845f2ccc606a2ac21 ]
In pmu_dev_alloc(), when dev_set_name() failed, it will goto free_dev
and call put_device(pmu->dev) to release it.
However pmu->dev->release is assigned after this, which makes warning
and memleak.
Call dev_set_name() after pmu->dev->release = pmu_dev_release to fix it.
Device '(null)' does not have a release() function...
WARNING: CPU: 2 PID: 441 at drivers/base/core.c:2332 device_release+0x1b9/0x240
...
Call Trace:
<TASK>
kobject_put+0x17f/0x460
put_device+0x20/0x30
pmu_dev_alloc+0x152/0x400
perf_pmu_register+0x96b/0xee0
...
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
unreferenced object 0xffff888014759000 (size 2048):
comm "modprobe", pid 441, jiffies 4294931444 (age 38.332s)
backtrace:
[<0000000005aed3b4>] kmalloc_trace+0x27/0x110
[<000000006b38f9b8>] pmu_dev_alloc+0x50/0x400
[<00000000735f17be>] perf_pmu_register+0x96b/0xee0
[<00000000e38477f1>] 0xffffffffc0ad8603
[<000000004e162216>] do_one_initcall+0xd0/0x4e0
...
Fixes: abe43400579d ("perf: Sysfs enumeration")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221111103653.91058-1-chenzhongjin@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/events/core.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 5422bd77c7d4..e95088144471 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -11175,13 +11175,15 @@ static int pmu_dev_alloc(struct pmu *pmu)
pmu->dev->groups = pmu->attr_groups;
device_initialize(pmu->dev);
- ret = dev_set_name(pmu->dev, "%s", pmu->name);
- if (ret)
- goto free_dev;
dev_set_drvdata(pmu->dev, pmu);
pmu->dev->bus = &pmu_bus;
pmu->dev->release = pmu_dev_release;
+
+ ret = dev_set_name(pmu->dev, "%s", pmu->name);
+ if (ret)
+ goto free_dev;
+
ret = device_add(pmu->dev);
if (ret)
goto free_dev;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 083/731] lib/debugobjects: fix stat count and optimize debug_objects_mem_init
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 082/731] perf: Fix possible memleak in pmu_dev_alloc() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 084/731] platform/x86: huawei-wmi: fix return value calculation Greg Kroah-Hartman
` (658 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, wuchi, Waiman Long, Thomas Gleixner,
Christoph Hellwig, Kees Cook, Andrew Morton, Sasha Levin
From: wuchi <wuchi.zero@gmail.com>
[ Upstream commit eabb7f1ace53e127309407b2b5e74e8199e85270 ]
1. Var debug_objects_allocated tracks valid kmem_cache_alloc calls, so
track it in debug_objects_replace_static_objects. Do similar things in
object_cpu_offline.
2. In debug_objects_mem_init, there is no need to call function
cpuhp_setup_state_nocalls when debug_objects_enabled = 0 (out of
memory).
Link: https://lkml.kernel.org/r/20220611130634.99741-1-wuchi.zero@gmail.com
Fixes: 634d61f45d6f ("debugobjects: Percpu pool lookahead freeing/allocation")
Fixes: c4b73aabd098 ("debugobjects: Track number of kmem_cache_alloc/kmem_cache_free done")
Signed-off-by: wuchi <wuchi.zero@gmail.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/debugobjects.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index 6946f8e204e3..793c31b7e417 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -440,6 +440,7 @@ static int object_cpu_offline(unsigned int cpu)
struct debug_percpu_free *percpu_pool;
struct hlist_node *tmp;
struct debug_obj *obj;
+ unsigned long flags;
/* Remote access is safe as the CPU is dead already */
percpu_pool = per_cpu_ptr(&percpu_obj_pool, cpu);
@@ -447,6 +448,12 @@ static int object_cpu_offline(unsigned int cpu)
hlist_del(&obj->node);
kmem_cache_free(obj_cache, obj);
}
+
+ raw_spin_lock_irqsave(&pool_lock, flags);
+ obj_pool_used -= percpu_pool->obj_free;
+ debug_objects_freed += percpu_pool->obj_free;
+ raw_spin_unlock_irqrestore(&pool_lock, flags);
+
percpu_pool->obj_free = 0;
return 0;
@@ -1321,6 +1328,8 @@ static int __init debug_objects_replace_static_objects(void)
hlist_add_head(&obj->node, &objects);
}
+ debug_objects_allocated += i;
+
/*
* debug_objects_mem_init() is now called early that only one CPU is up
* and interrupts have been disabled, so it is safe to replace the
@@ -1389,6 +1398,7 @@ void __init debug_objects_mem_init(void)
debug_objects_enabled = 0;
kmem_cache_destroy(obj_cache);
pr_warn("out of memory.\n");
+ return;
} else
debug_objects_selftest();
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 084/731] platform/x86: huawei-wmi: fix return value calculation
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 083/731] lib/debugobjects: fix stat count and optimize debug_objects_mem_init Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 085/731] timerqueue: Use rb_entry_safe() in timerqueue_getnext() Greg Kroah-Hartman
` (657 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Barnabás Pőcze,
Hans de Goede, Sasha Levin
From: Barnabás Pőcze <pobrn@protonmail.com>
[ Upstream commit 0b9a1dcdb6a2c841899389bf2dd7a3e0e2aa0e99 ]
Previously, `huawei_wmi_input_setup()` returned the result of
logical or-ing the return values of two functions that return negative
errno-style error codes and one that returns `acpi_status`. If this
returned value was non-zero, then it was propagated from the platform
driver's probe function. That function should return a negative
errno-style error code, so the result of the logical or that
`huawei_wmi_input_setup()` returned was not appropriate.
Fix that by checking each function separately and returning the
error code unmodified.
Fixes: 1ac9abeb2e5b ("platform/x86: huawei-wmi: Move to platform driver")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20221005150032.173198-2-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/x86/huawei-wmi.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/huawei-wmi.c b/drivers/platform/x86/huawei-wmi.c
index eac3e6b4ea11..935562c870c3 100644
--- a/drivers/platform/x86/huawei-wmi.c
+++ b/drivers/platform/x86/huawei-wmi.c
@@ -760,6 +760,9 @@ static int huawei_wmi_input_setup(struct device *dev,
const char *guid,
struct input_dev **idev)
{
+ acpi_status status;
+ int err;
+
*idev = devm_input_allocate_device(dev);
if (!*idev)
return -ENOMEM;
@@ -769,10 +772,19 @@ static int huawei_wmi_input_setup(struct device *dev,
(*idev)->id.bustype = BUS_HOST;
(*idev)->dev.parent = dev;
- return sparse_keymap_setup(*idev, huawei_wmi_keymap, NULL) ||
- input_register_device(*idev) ||
- wmi_install_notify_handler(guid, huawei_wmi_input_notify,
- *idev);
+ err = sparse_keymap_setup(*idev, huawei_wmi_keymap, NULL);
+ if (err)
+ return err;
+
+ err = input_register_device(*idev);
+ if (err)
+ return err;
+
+ status = wmi_install_notify_handler(guid, huawei_wmi_input_notify, *idev);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ return 0;
}
static void huawei_wmi_input_exit(struct device *dev, const char *guid)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 085/731] timerqueue: Use rb_entry_safe() in timerqueue_getnext()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 084/731] platform/x86: huawei-wmi: fix return value calculation Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 086/731] proc: fixup uptime selftest Greg Kroah-Hartman
` (656 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Barnabás Pőcze,
Thomas Gleixner, Sasha Levin
From: Barnabás Pőcze <pobrn@protonmail.com>
[ Upstream commit 2f117484329b233455ee278f2d9b0a4356835060 ]
When `timerqueue_getnext()` is called on an empty timer queue, it will
use `rb_entry()` on a NULL pointer, which is invalid. Fix that by using
`rb_entry_safe()` which handles NULL pointers.
This has not caused any issues so far because the offset of the `rb_node`
member in `timerqueue_node` is 0, so `rb_entry()` is essentially a no-op.
Fixes: 511885d7061e ("lib/timerqueue: Rely on rbtree semantics for next timer")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221114195421.342929-1-pobrn@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/timerqueue.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/timerqueue.h b/include/linux/timerqueue.h
index 93884086f392..adc80e29168e 100644
--- a/include/linux/timerqueue.h
+++ b/include/linux/timerqueue.h
@@ -35,7 +35,7 @@ struct timerqueue_node *timerqueue_getnext(struct timerqueue_head *head)
{
struct rb_node *leftmost = rb_first_cached(&head->rb_root);
- return rb_entry(leftmost, struct timerqueue_node, node);
+ return rb_entry_safe(leftmost, struct timerqueue_node, node);
}
static inline void timerqueue_init(struct timerqueue_node *node)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 086/731] proc: fixup uptime selftest
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 085/731] timerqueue: Use rb_entry_safe() in timerqueue_getnext() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 087/731] lib/fonts: fix undefined behavior in bit shift for get_default_font Greg Kroah-Hartman
` (655 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexey Dobriyan, Andrew Morton, Sasha Levin
From: Alexey Dobriyan <adobriyan@gmail.com>
[ Upstream commit 5cc81d5c81af0dee54da9a67a3ebe4be076a13db ]
syscall(3) returns -1 and sets errno on error, unlike "syscall"
instruction.
Systems which have <= 32/64 CPUs are unaffected. Test won't bounce
to all CPUs before completing if there are more of them.
Link: https://lkml.kernel.org/r/Y1bUiT7VRXlXPQa1@p183
Fixes: 1f5bd0547654 ("proc: selftests: test /proc/uptime")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/proc/proc-uptime-002.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/proc/proc-uptime-002.c b/tools/testing/selftests/proc/proc-uptime-002.c
index e7ceabed7f51..7d0aa22bdc12 100644
--- a/tools/testing/selftests/proc/proc-uptime-002.c
+++ b/tools/testing/selftests/proc/proc-uptime-002.c
@@ -17,6 +17,7 @@
// while shifting across CPUs.
#undef NDEBUG
#include <assert.h>
+#include <errno.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <stdlib.h>
@@ -54,7 +55,7 @@ int main(void)
len += sizeof(unsigned long);
free(m);
m = malloc(len);
- } while (sys_sched_getaffinity(0, len, m) == -EINVAL);
+ } while (sys_sched_getaffinity(0, len, m) == -1 && errno == EINVAL);
fd = open("/proc/uptime", O_RDONLY);
assert(fd >= 0);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 087/731] lib/fonts: fix undefined behavior in bit shift for get_default_font
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 086/731] proc: fixup uptime selftest Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 088/731] ocfs2: fix memory leak in ocfs2_stack_glue_init() Greg Kroah-Hartman
` (654 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Andrew Morton, Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit 6fe888c4d2fb174408e4540bb2d5602b9f507f90 ]
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in lib/fonts/fonts.c:139:20
left shift of 1 by 31 places cannot be represented in type 'int'
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
get_default_font+0x1c7/0x1f0
fbcon_startup+0x347/0x3a0
do_take_over_console+0xce/0x270
do_fbcon_takeover+0xa1/0x170
do_fb_registered+0x2a8/0x340
fbcon_fb_registered+0x47/0xe0
register_framebuffer+0x294/0x4a0
__drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper]
drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper]
drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper]
drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper]
bochs_pci_probe+0x6ca/0x772 [bochs]
local_pci_probe+0x4d/0xb0
pci_device_probe+0x119/0x320
really_probe+0x181/0x550
__driver_probe_device+0xc6/0x220
driver_probe_device+0x32/0x100
__driver_attach+0x195/0x200
bus_for_each_dev+0xbb/0x120
driver_attach+0x27/0x30
bus_add_driver+0x22e/0x2f0
driver_register+0xa9/0x190
__pci_register_driver+0x90/0xa0
bochs_pci_driver_init+0x52/0x1000 [bochs]
do_one_initcall+0x76/0x430
do_init_module+0x61/0x28a
load_module+0x1f82/0x2e50
__do_sys_finit_module+0xf8/0x190
__x64_sys_finit_module+0x23/0x30
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Link: https://lkml.kernel.org/r/20221031113829.4183153-1-cuigaosheng1@huawei.com
Fixes: c81f717cb9e0 ("fbcon: Fix typo and bogus logic in get_default_font")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/fonts/fonts.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lib/fonts/fonts.c b/lib/fonts/fonts.c
index 5f4b07b56cd9..973866438608 100644
--- a/lib/fonts/fonts.c
+++ b/lib/fonts/fonts.c
@@ -135,8 +135,8 @@ const struct font_desc *get_default_font(int xres, int yres, u32 font_w,
if (res > 20)
c += 20 - res;
- if ((font_w & (1 << (f->width - 1))) &&
- (font_h & (1 << (f->height - 1))))
+ if ((font_w & (1U << (f->width - 1))) &&
+ (font_h & (1U << (f->height - 1))))
c += 1000;
if (c > cc) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 088/731] ocfs2: fix memory leak in ocfs2_stack_glue_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 087/731] lib/fonts: fix undefined behavior in bit shift for get_default_font Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 089/731] MIPS: vpe-mt: fix possible memory leak while module exiting Greg Kroah-Hartman
` (653 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Joseph Qi,
Mark Fasheh, Joel Becker, Junxiao Bi, Changwei Ge, Gang He,
Jun Piao, Andrew Morton, Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit 13b6269dd022aaa69ca8d1df374ab327504121cf ]
ocfs2_table_header should be free in ocfs2_stack_glue_init() if
ocfs2_sysfs_init() failed, otherwise kmemleak will report memleak.
BUG: memory leak
unreferenced object 0xffff88810eeb5800 (size 128):
comm "modprobe", pid 4507, jiffies 4296182506 (age 55.888s)
hex dump (first 32 bytes):
c0 40 14 a0 ff ff ff ff 00 00 00 00 01 00 00 00 .@..............
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000001e59e1cd>] __register_sysctl_table+0xca/0xef0
[<00000000c04f70f7>] 0xffffffffa0050037
[<000000001bd12912>] do_one_initcall+0xdb/0x480
[<0000000064f766c9>] do_init_module+0x1cf/0x680
[<000000002ba52db0>] load_module+0x6441/0x6f20
[<000000009772580d>] __do_sys_finit_module+0x12f/0x1c0
[<00000000380c1f22>] do_syscall_64+0x3f/0x90
[<000000004cf473bc>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Link: https://lkml.kernel.org/r/41651ca1-432a-db34-eb97-d35744559de1@linux.alibaba.com
Fixes: 3878f110f71a ("ocfs2: Move the hb_ctl_path sysctl into the stack glue.")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ocfs2/stackglue.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c
index 16f1bfc407f2..955f475f9aca 100644
--- a/fs/ocfs2/stackglue.c
+++ b/fs/ocfs2/stackglue.c
@@ -703,6 +703,8 @@ static struct ctl_table_header *ocfs2_table_header;
static int __init ocfs2_stack_glue_init(void)
{
+ int ret;
+
strcpy(cluster_stack_name, OCFS2_STACK_PLUGIN_O2CB);
ocfs2_table_header = register_sysctl_table(ocfs2_root_table);
@@ -712,7 +714,11 @@ static int __init ocfs2_stack_glue_init(void)
return -ENOMEM; /* or something. */
}
- return ocfs2_sysfs_init();
+ ret = ocfs2_sysfs_init();
+ if (ret)
+ unregister_sysctl_table(ocfs2_table_header);
+
+ return ret;
}
static void __exit ocfs2_stack_glue_exit(void)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 089/731] MIPS: vpe-mt: fix possible memory leak while module exiting
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (87 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 088/731] ocfs2: fix memory leak in ocfs2_stack_glue_init() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 090/731] MIPS: vpe-cmp: " Greg Kroah-Hartman
` (652 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Thomas Bogendoerfer,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 5822e8cc84ee37338ab0bdc3124f6eec04dc232d ]
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
it need be freed when module exiting, call put_device() to give up
reference, so that it can be freed in kobject_cleanup() when the
refcount hit to 0. The vpe_device is static, so remove kfree() from
vpe_device_release().
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/kernel/vpe-mt.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/kernel/vpe-mt.c b/arch/mips/kernel/vpe-mt.c
index bad6b0891b2b..84a82b551ec3 100644
--- a/arch/mips/kernel/vpe-mt.c
+++ b/arch/mips/kernel/vpe-mt.c
@@ -313,7 +313,6 @@ ATTRIBUTE_GROUPS(vpe);
static void vpe_device_release(struct device *cd)
{
- kfree(cd);
}
static struct class vpe_class = {
@@ -497,6 +496,7 @@ int __init vpe_module_init(void)
device_del(&vpe_device);
out_class:
+ put_device(&vpe_device);
class_unregister(&vpe_class);
out_chrdev:
@@ -509,7 +509,7 @@ void __exit vpe_module_exit(void)
{
struct vpe *v, *n;
- device_del(&vpe_device);
+ device_unregister(&vpe_device);
class_unregister(&vpe_class);
unregister_chrdev(major, VPE_MODULE_NAME);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 090/731] MIPS: vpe-cmp: fix possible memory leak while module exiting
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (88 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 089/731] MIPS: vpe-mt: fix possible memory leak while module exiting Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 091/731] selftests/efivarfs: Add checking of the test return value Greg Kroah-Hartman
` (651 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Thomas Bogendoerfer,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit c5ed1fe0801f0c66b0fbce2785239a5664629057 ]
dev_set_name() allocates memory for name, it need be freed
when module exiting, call put_device() to give up reference,
so that it can be freed in kobject_cleanup() when the refcount
hit to 0. The vpe_device is static, so remove kfree() from
vpe_device_release().
Fixes: 17a1d523aa58 ("MIPS: APRP: Add VPE loader support for CMP platforms.")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/kernel/vpe-cmp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/kernel/vpe-cmp.c b/arch/mips/kernel/vpe-cmp.c
index e673603e11e5..92140edb3ce3 100644
--- a/arch/mips/kernel/vpe-cmp.c
+++ b/arch/mips/kernel/vpe-cmp.c
@@ -75,7 +75,6 @@ ATTRIBUTE_GROUPS(vpe);
static void vpe_device_release(struct device *cd)
{
- kfree(cd);
}
static struct class vpe_class = {
@@ -157,6 +156,7 @@ int __init vpe_module_init(void)
device_del(&vpe_device);
out_class:
+ put_device(&vpe_device);
class_unregister(&vpe_class);
out_chrdev:
@@ -169,7 +169,7 @@ void __exit vpe_module_exit(void)
{
struct vpe *v, *n;
- device_del(&vpe_device);
+ device_unregister(&vpe_device);
class_unregister(&vpe_class);
unregister_chrdev(major, VPE_MODULE_NAME);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 091/731] selftests/efivarfs: Add checking of the test return value
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (89 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 090/731] MIPS: vpe-cmp: " Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 092/731] PNP: fix name memory leak in pnp_alloc_dev() Greg Kroah-Hartman
` (650 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zhao Gongyi, Shuah Khan, Sasha Levin
From: Zhao Gongyi <zhaogongyi@huawei.com>
[ Upstream commit c93924267fe6f2b44af1849f714ae9cd8117a9cd ]
Add checking of the test return value, otherwise it will report success
forever for test_create_read().
Fixes: dff6d2ae56d0 ("selftests/efivarfs: clean up test files from test_create*()")
Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/efivarfs/efivarfs.sh | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/tools/testing/selftests/efivarfs/efivarfs.sh b/tools/testing/selftests/efivarfs/efivarfs.sh
index a90f394f9aa9..d374878cc0ba 100755
--- a/tools/testing/selftests/efivarfs/efivarfs.sh
+++ b/tools/testing/selftests/efivarfs/efivarfs.sh
@@ -87,6 +87,11 @@ test_create_read()
{
local file=$efivarfs_mount/$FUNCNAME-$test_guid
./create-read $file
+ if [ $? -ne 0 ]; then
+ echo "create and read $file failed"
+ file_cleanup $file
+ exit 1
+ fi
file_cleanup $file
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 092/731] PNP: fix name memory leak in pnp_alloc_dev()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (90 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 091/731] selftests/efivarfs: Add checking of the test return value Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 093/731] perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology() Greg Kroah-Hartman
` (649 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Hanjun Guo,
Rafael J. Wysocki, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 110d7b0325c55ff3620073ba4201845f59e22ebf ]
After commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
move dev_set_name() after pnp_add_id() to avoid memory leak.
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pnp/core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pnp/core.c b/drivers/pnp/core.c
index 4df5aa6a309c..6a60c5d83383 100644
--- a/drivers/pnp/core.c
+++ b/drivers/pnp/core.c
@@ -148,14 +148,14 @@ struct pnp_dev *pnp_alloc_dev(struct pnp_protocol *protocol, int id,
dev->dev.coherent_dma_mask = dev->dma_mask;
dev->dev.release = &pnp_release_device;
- dev_set_name(&dev->dev, "%02x:%02x", dev->protocol->number, dev->number);
-
dev_id = pnp_add_id(dev, pnpid);
if (!dev_id) {
kfree(dev);
return NULL;
}
+ dev_set_name(&dev->dev, "%02x:%02x", dev->protocol->number, dev->number);
+
return dev;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 093/731] perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (91 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 092/731] PNP: fix name memory leak in pnp_alloc_dev() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 094/731] perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox() Greg Kroah-Hartman
` (648 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang,
Peter Zijlstra (Intel),
Kan Liang, Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit c508eb042d9739bf9473526f53303721b70e9100 ]
pci_get_device() will increase the reference count for the returned
pci_dev, and also decrease the reference count for the input parameter
*from* if it is not NULL.
If we break the loop in sad_cfg_iio_topology() with 'dev' not NULL. We
need to call pci_dev_put() to decrease the reference count. Since
pci_dev_put() can handle the NULL input parameter, we can just add one
pci_dev_put() right before 'return ret'.
Fixes: c1777be3646b ("perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on SNR")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-2-wangxiongfeng2@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/intel/uncore_snbep.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index ed869443efb2..76fedc8e12dd 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -4492,6 +4492,8 @@ static int sad_cfg_iio_topology(struct intel_uncore_type *type, u8 *sad_pmon_map
type->topology = NULL;
}
+ pci_dev_put(dev);
+
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 094/731] perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (92 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 093/731] perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 095/731] perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map() Greg Kroah-Hartman
` (647 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang,
Peter Zijlstra (Intel),
Kan Liang, Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit 1ff9dd6e7071a561f803135c1d684b13c7a7d01d ]
pci_get_device() will increase the reference count for the returned
'dev'. We need to call pci_dev_put() to decrease the reference count.
Since 'dev' is only used in pci_read_config_dword(), let's add
pci_dev_put() right after it.
Fixes: 9d480158ee86 ("perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-3-wangxiongfeng2@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/intel/uncore_snbep.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 76fedc8e12dd..f5d89d06c66a 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -2891,6 +2891,7 @@ static bool hswep_has_limit_sbox(unsigned int device)
return false;
pci_read_config_dword(dev, HSWEP_PCU_CAPID4_OFFET, &capid4);
+ pci_dev_put(dev);
if (!hswep_get_chop(capid4))
return true;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 095/731] perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (93 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 094/731] perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 096/731] perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box() Greg Kroah-Hartman
` (646 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang,
Peter Zijlstra (Intel),
Kan Liang, Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit 8ebd16c11c346751b3944d708e6c181ed4746c39 ]
pci_get_device() will increase the reference count for the returned
pci_dev, so snr_uncore_get_mc_dev() will return a pci_dev with its
reference count increased. We need to call pci_dev_put() to decrease the
reference count. Let's add the missing pci_dev_put().
Fixes: ee49532b38dd ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-4-wangxiongfeng2@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/intel/uncore_snbep.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index f5d89d06c66a..fcd95e93f479 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -4860,6 +4860,8 @@ static int snr_uncore_mmio_map(struct intel_uncore_box *box,
addr += box_ctl;
+ pci_dev_put(pdev);
+
box->io_addr = ioremap(addr, type->mmio_map_size);
if (!box->io_addr) {
pr_warn("perf uncore: Failed to ioremap for %s.\n", type->name);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 096/731] perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (94 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 095/731] perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 097/731] platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init() Greg Kroah-Hartman
` (645 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang,
Peter Zijlstra (Intel),
Kan Liang, Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit 17b8d847b92d815d1638f0de154654081d66b281 ]
pci_get_device() will increase the reference count for the returned
pci_dev, so tgl_uncore_get_mc_dev() will return a pci_dev with its
reference count increased. We need to call pci_dev_put() to decrease the
reference count before exiting from __uncore_imc_init_box(). Add
pci_dev_put() for both normal and error path.
Fixes: fdb64822443e ("perf/x86: Add Intel Tiger Lake uncore support")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-5-wangxiongfeng2@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/intel/uncore_snb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/x86/events/intel/uncore_snb.c b/arch/x86/events/intel/uncore_snb.c
index dc3ae55f79e0..912fb3821a6b 100644
--- a/arch/x86/events/intel/uncore_snb.c
+++ b/arch/x86/events/intel/uncore_snb.c
@@ -1423,6 +1423,7 @@ static void tgl_uncore_imc_freerunning_init_box(struct intel_uncore_box *box)
/* MCHBAR is disabled */
if (!(mch_bar & BIT(0))) {
pr_warn("perf uncore: MCHBAR is disabled. Failed to map IMC free-running counters.\n");
+ pci_dev_put(pdev);
return;
}
mch_bar &= ~BIT(0);
@@ -1436,6 +1437,8 @@ static void tgl_uncore_imc_freerunning_init_box(struct intel_uncore_box *box)
box->io_addr = ioremap(addr, type->mmio_map_size);
if (!box->io_addr)
pr_warn("perf uncore: Failed to ioremap for %s.\n", type->name);
+
+ pci_dev_put(pdev);
}
static struct intel_uncore_ops tgl_uncore_imc_freerunning_ops = {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 097/731] platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (95 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 096/731] perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 098/731] thermal: core: fix some possible name leaks in error paths Greg Kroah-Hartman
` (644 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Brian Norris,
Prashant Malani, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 5a2d96623670155d94aca72c320c0ac27bdc6bd2 ]
The following WARNING message was given when rmmod cros_usbpd_notify:
Unexpected driver unregister!
WARNING: CPU: 0 PID: 253 at drivers/base/driver.c:270 driver_unregister+0x8a/0xb0
Modules linked in: cros_usbpd_notify(-)
CPU: 0 PID: 253 Comm: rmmod Not tainted 6.1.0-rc3 #24
...
Call Trace:
<TASK>
cros_usbpd_notify_exit+0x11/0x1e [cros_usbpd_notify]
__x64_sys_delete_module+0x3c7/0x570
? __ia32_sys_delete_module+0x570/0x570
? lock_is_held_type+0xe3/0x140
? syscall_enter_from_user_mode+0x17/0x50
? rcu_read_lock_sched_held+0xa0/0xd0
? syscall_enter_from_user_mode+0x1c/0x50
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f333fe9b1b7
The reason is that the cros_usbpd_notify_init() does not check the return
value of platform_driver_register(), and the cros_usbpd_notify can
install successfully even if platform_driver_register() failed.
Fix by checking the return value of platform_driver_register() and
unregister cros_usbpd_notify_plat_driver when it failed.
Fixes: ec2daf6e33f9 ("platform: chrome: Add cros-usbpd-notify driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20221117080823.77549-1-yuancan@huawei.com
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/chrome/cros_usbpd_notify.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/chrome/cros_usbpd_notify.c b/drivers/platform/chrome/cros_usbpd_notify.c
index 48a6617aa12f..de76de6f5090 100644
--- a/drivers/platform/chrome/cros_usbpd_notify.c
+++ b/drivers/platform/chrome/cros_usbpd_notify.c
@@ -285,7 +285,11 @@ static int __init cros_usbpd_notify_init(void)
return ret;
#ifdef CONFIG_ACPI
- platform_driver_register(&cros_usbpd_notify_acpi_driver);
+ ret = platform_driver_register(&cros_usbpd_notify_acpi_driver);
+ if (ret) {
+ platform_driver_unregister(&cros_usbpd_notify_plat_driver);
+ return ret;
+ }
#endif
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 098/731] thermal: core: fix some possible name leaks in error paths
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (96 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 097/731] platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 099/731] irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe() Greg Kroah-Hartman
` (643 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Rafael J. Wysocki,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 4748f9687caaeefab8578285b97b2f30789fc4b4 ]
In some error paths before device_register(), the names allocated
by dev_set_name() are not freed. Move dev_set_name() front to
device_register(), so the name can be freed while calling
put_device().
Fixes: 1dd7128b839f ("thermal/core: Fix null pointer dereference in thermal_release()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/thermal_core.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 867c8aa92b3a..38082fdc4fde 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -905,10 +905,6 @@ __thermal_cooling_device_register(struct device_node *np,
cdev->id = ret;
id = ret;
- ret = dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
- if (ret)
- goto out_ida_remove;
-
cdev->type = kstrdup(type ? type : "", GFP_KERNEL);
if (!cdev->type) {
ret = -ENOMEM;
@@ -923,6 +919,11 @@ __thermal_cooling_device_register(struct device_node *np,
cdev->device.class = &thermal_class;
cdev->devdata = devdata;
thermal_cooling_device_setup_sysfs(cdev);
+ ret = dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
+ if (ret) {
+ thermal_cooling_device_destroy_sysfs(cdev);
+ goto out_kfree_type;
+ }
ret = device_register(&cdev->device);
if (ret)
goto out_kfree_type;
@@ -1235,10 +1236,6 @@ thermal_zone_device_register(const char *type, int trips, int mask,
tz->id = id;
strlcpy(tz->type, type, sizeof(tz->type));
- result = dev_set_name(&tz->device, "thermal_zone%d", tz->id);
- if (result)
- goto remove_id;
-
if (!ops->critical)
ops->critical = thermal_zone_device_critical;
@@ -1260,6 +1257,11 @@ thermal_zone_device_register(const char *type, int trips, int mask,
/* A new thermal zone needs to be updated anyway. */
atomic_set(&tz->need_update, 1);
+ result = dev_set_name(&tz->device, "thermal_zone%d", tz->id);
+ if (result) {
+ thermal_zone_destroy_device_groups(tz);
+ goto remove_id;
+ }
result = device_register(&tz->device);
if (result)
goto release_device;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 099/731] irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (97 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 098/731] thermal: core: fix some possible name leaks in error paths Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 100/731] irqchip/wpcm450: Fix memory leak in wpcm450_aic_of_init() Greg Kroah-Hartman
` (642 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Marc Zyngier, Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit f9ee20c85b3a3ba0afd3672630ec4f93d339f015 ]
gic_probe() calls pm_runtime_get_sync() and added fail path as
rpm_put to put usage_counter. However, pm_runtime_get_sync()
will increment usage_counter even it failed. Fix it by replacing it with
pm_runtime_resume_and_get() to keep usage counter balanced.
Fixes: 9c8edddfc992 ("irqchip/gic: Add platform driver for non-root GICs that require RPM")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124065150.22809-1-shangxiaojing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/irqchip/irq-gic-pm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-gic-pm.c b/drivers/irqchip/irq-gic-pm.c
index b60e1853593f..3989d16f997b 100644
--- a/drivers/irqchip/irq-gic-pm.c
+++ b/drivers/irqchip/irq-gic-pm.c
@@ -102,7 +102,7 @@ static int gic_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
- ret = pm_runtime_get_sync(dev);
+ ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
goto rpm_disable;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 100/731] irqchip/wpcm450: Fix memory leak in wpcm450_aic_of_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (98 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 099/731] irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 101/731] EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper() Greg Kroah-Hartman
` (641 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wei Yongjun,
Jonathan Neuschäfer, Marc Zyngier, Sasha Levin
From: Wei Yongjun <weiyongjun1@huawei.com>
[ Upstream commit 4208d4faf36573a507b5e5de17abe342e9276759 ]
If of_iomap() failed, 'aic' should be freed before return. Otherwise
there is a memory leak.
Fixes: fead4dd49663 ("irqchip: Add driver for WPCM450 interrupt controller")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115092532.1704032-1-weiyongjun@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/irqchip/irq-wpcm450-aic.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/irqchip/irq-wpcm450-aic.c b/drivers/irqchip/irq-wpcm450-aic.c
index f3ac392d5bc8..36d0d0cf3fa2 100644
--- a/drivers/irqchip/irq-wpcm450-aic.c
+++ b/drivers/irqchip/irq-wpcm450-aic.c
@@ -146,6 +146,7 @@ static int __init wpcm450_aic_of_init(struct device_node *node,
aic->regs = of_iomap(node, 0);
if (!aic->regs) {
pr_err("Failed to map WPCM450 AIC registers\n");
+ kfree(aic);
return -ENOMEM;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 101/731] EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (99 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 100/731] irqchip/wpcm450: Fix memory leak in wpcm450_aic_of_init() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 102/731] SUNRPC: Return true/false (not 1/0) from bool functions Greg Kroah-Hartman
` (640 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Qiuxu Zhuo,
Tony Luck, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 9c8921555907f4d723f01ed2d859b66f2d14f08e ]
As the comment of pci_get_domain_bus_and_slot() says, it returns
a PCI device with refcount incremented, so it doesn't need to
call an extra pci_dev_get() in pci_get_dev_wrapper(), and the PCI
device needs to be put in the error path.
Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20221128065512.3572550-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/edac/i10nm_base.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/edac/i10nm_base.c b/drivers/edac/i10nm_base.c
index 6cf50ee0b77c..e0af60833d28 100644
--- a/drivers/edac/i10nm_base.c
+++ b/drivers/edac/i10nm_base.c
@@ -198,11 +198,10 @@ static struct pci_dev *pci_get_dev_wrapper(int dom, unsigned int bus,
if (unlikely(pci_enable_device(pdev) < 0)) {
edac_dbg(2, "Failed to enable device %02x:%02x.%x\n",
bus, dev, fun);
+ pci_dev_put(pdev);
return NULL;
}
- pci_dev_get(pdev);
-
return pdev;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 102/731] SUNRPC: Return true/false (not 1/0) from bool functions
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (100 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 101/731] EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 103/731] NFSD: Finish converting the NFSv2 GETACL result encoder Greg Kroah-Hartman
` (639 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Haowen Bai, Chuck Lever, Sasha Levin
From: Haowen Bai <baihaowen@meizu.com>
[ Upstream commit 5f7b839d47dbc74cf4a07beeab5191f93678673e ]
Return boolean values ("true" or "false") instead of 1 or 0 from bool
functions. This fixes the following warnings from coccicheck:
./fs/nfsd/nfs2acl.c:289:9-10: WARNING: return of 0/1 in function
'nfsaclsvc_encode_accessres' with return type bool
./fs/nfsd/nfs2acl.c:252:9-10: WARNING: return of 0/1 in function
'nfsaclsvc_encode_getaclres' with return type bool
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: ea5021e911d3 ("NFSD: Finish converting the NFSv2 GETACL result encoder")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs2acl.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/fs/nfsd/nfs2acl.c b/fs/nfsd/nfs2acl.c
index 4b43929c1f25..ec7776b0e868 100644
--- a/fs/nfsd/nfs2acl.c
+++ b/fs/nfsd/nfs2acl.c
@@ -249,34 +249,34 @@ static int nfsaclsvc_encode_getaclres(struct svc_rqst *rqstp, __be32 *p)
int w;
if (!svcxdr_encode_stat(xdr, resp->status))
- return 0;
+ return false;
if (dentry == NULL || d_really_is_negative(dentry))
- return 1;
+ return true;
inode = d_inode(dentry);
if (!svcxdr_encode_fattr(rqstp, xdr, &resp->fh, &resp->stat))
- return 0;
+ return false;
if (xdr_stream_encode_u32(xdr, resp->mask) < 0)
- return 0;
+ return false;
rqstp->rq_res.page_len = w = nfsacl_size(
(resp->mask & NFS_ACL) ? resp->acl_access : NULL,
(resp->mask & NFS_DFACL) ? resp->acl_default : NULL);
while (w > 0) {
if (!*(rqstp->rq_next_page++))
- return 1;
+ return true;
w -= PAGE_SIZE;
}
if (!nfs_stream_encode_acl(xdr, inode, resp->acl_access,
resp->mask & NFS_ACL, 0))
- return 0;
+ return false;
if (!nfs_stream_encode_acl(xdr, inode, resp->acl_default,
resp->mask & NFS_DFACL, NFS_ACL_DEFAULT))
- return 0;
+ return false;
- return 1;
+ return true;
}
/* ACCESS */
@@ -286,17 +286,17 @@ static int nfsaclsvc_encode_accessres(struct svc_rqst *rqstp, __be32 *p)
struct nfsd3_accessres *resp = rqstp->rq_resp;
if (!svcxdr_encode_stat(xdr, resp->status))
- return 0;
+ return false;
switch (resp->status) {
case nfs_ok:
if (!svcxdr_encode_fattr(rqstp, xdr, &resp->fh, &resp->stat))
- return 0;
+ return false;
if (xdr_stream_encode_u32(xdr, resp->access) < 0)
- return 0;
+ return false;
break;
}
- return 1;
+ return true;
}
/*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 103/731] NFSD: Finish converting the NFSv2 GETACL result encoder
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (101 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 102/731] SUNRPC: Return true/false (not 1/0) from bool functions Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 104/731] nfsd: dont call nfsd_file_put from client states seqfile display Greg Kroah-Hartman
` (638 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jeff Layton, Chuck Lever, Sasha Levin
From: Chuck Lever <chuck.lever@oracle.com>
[ Upstream commit ea5021e911d3479346a75ac9b7d9dcd751b0fb99 ]
The xdr_stream conversion inadvertently left some code that set the
page_len of the send buffer. The XDR stream encoders should handle
this automatically now.
This oversight adds garbage past the end of the Reply message.
Clients typically ignore the garbage, but NFSD does not need to send
it, as it leaks stale memory contents onto the wire.
Fixes: f8cba47344f7 ("NFSD: Update the NFSv2 GETACL result encoder to use struct xdr_stream")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs2acl.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/fs/nfsd/nfs2acl.c b/fs/nfsd/nfs2acl.c
index ec7776b0e868..30a1782a03f0 100644
--- a/fs/nfsd/nfs2acl.c
+++ b/fs/nfsd/nfs2acl.c
@@ -246,7 +246,6 @@ static int nfsaclsvc_encode_getaclres(struct svc_rqst *rqstp, __be32 *p)
struct nfsd3_getaclres *resp = rqstp->rq_resp;
struct dentry *dentry = resp->fh.fh_dentry;
struct inode *inode;
- int w;
if (!svcxdr_encode_stat(xdr, resp->status))
return false;
@@ -260,15 +259,6 @@ static int nfsaclsvc_encode_getaclres(struct svc_rqst *rqstp, __be32 *p)
if (xdr_stream_encode_u32(xdr, resp->mask) < 0)
return false;
- rqstp->rq_res.page_len = w = nfsacl_size(
- (resp->mask & NFS_ACL) ? resp->acl_access : NULL,
- (resp->mask & NFS_DFACL) ? resp->acl_default : NULL);
- while (w > 0) {
- if (!*(rqstp->rq_next_page++))
- return true;
- w -= PAGE_SIZE;
- }
-
if (!nfs_stream_encode_acl(xdr, inode, resp->acl_access,
resp->mask & NFS_ACL, 0))
return false;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 104/731] nfsd: dont call nfsd_file_put from client states seqfile display
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (102 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 103/731] NFSD: Finish converting the NFSv2 GETACL result encoder Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 105/731] genirq/irqdesc: Dont try to remove non-existing sysfs files Greg Kroah-Hartman
` (637 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhi Li, Jeff Layton, Chuck Lever,
Sasha Levin
From: Jeff Layton <jlayton@kernel.org>
[ Upstream commit e0aa651068bfd520afcd357af8ecd2de005fc83d ]
We had a report of this:
BUG: sleeping function called from invalid context at fs/nfsd/filecache.c:440
...with a stack trace showing nfsd_file_put being called from
nfs4_show_open. This code has always tried to call fput while holding a
spinlock, but we recently changed this to use the filecache, and that
started triggering the might_sleep() in nfsd_file_put.
states_start takes and holds the cl_lock while iterating over the
client's states, and we can't sleep with that held.
Have the various nfs4_show_* functions instead hold the fi_lock instead
of taking a nfsd_file reference.
Fixes: 78599c42ae3c ("nfsd4: add file to display list of client's opens")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2138357
Reported-by: Zhi Li <yieli@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs4state.c | 51 +++++++++++++++++++++++++++++----------------
1 file changed, 33 insertions(+), 18 deletions(-)
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 7b763f146b62..c062728034ad 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -627,15 +627,26 @@ find_any_file(struct nfs4_file *f)
return ret;
}
-static struct nfsd_file *find_deleg_file(struct nfs4_file *f)
+static struct nfsd_file *find_any_file_locked(struct nfs4_file *f)
{
- struct nfsd_file *ret = NULL;
+ lockdep_assert_held(&f->fi_lock);
+
+ if (f->fi_fds[O_RDWR])
+ return f->fi_fds[O_RDWR];
+ if (f->fi_fds[O_WRONLY])
+ return f->fi_fds[O_WRONLY];
+ if (f->fi_fds[O_RDONLY])
+ return f->fi_fds[O_RDONLY];
+ return NULL;
+}
+
+static struct nfsd_file *find_deleg_file_locked(struct nfs4_file *f)
+{
+ lockdep_assert_held(&f->fi_lock);
- spin_lock(&f->fi_lock);
if (f->fi_deleg_file)
- ret = nfsd_file_get(f->fi_deleg_file);
- spin_unlock(&f->fi_lock);
- return ret;
+ return f->fi_deleg_file;
+ return NULL;
}
static atomic_long_t num_delegations;
@@ -2501,9 +2512,11 @@ static int nfs4_show_open(struct seq_file *s, struct nfs4_stid *st)
ols = openlockstateid(st);
oo = ols->st_stateowner;
nf = st->sc_file;
- file = find_any_file(nf);
+
+ spin_lock(&nf->fi_lock);
+ file = find_any_file_locked(nf);
if (!file)
- return 0;
+ goto out;
seq_printf(s, "- ");
nfs4_show_stateid(s, &st->sc_stateid);
@@ -2525,8 +2538,8 @@ static int nfs4_show_open(struct seq_file *s, struct nfs4_stid *st)
seq_printf(s, ", ");
nfs4_show_owner(s, oo);
seq_printf(s, " }\n");
- nfsd_file_put(file);
-
+out:
+ spin_unlock(&nf->fi_lock);
return 0;
}
@@ -2540,9 +2553,10 @@ static int nfs4_show_lock(struct seq_file *s, struct nfs4_stid *st)
ols = openlockstateid(st);
oo = ols->st_stateowner;
nf = st->sc_file;
- file = find_any_file(nf);
+ spin_lock(&nf->fi_lock);
+ file = find_any_file_locked(nf);
if (!file)
- return 0;
+ goto out;
seq_printf(s, "- ");
nfs4_show_stateid(s, &st->sc_stateid);
@@ -2562,8 +2576,8 @@ static int nfs4_show_lock(struct seq_file *s, struct nfs4_stid *st)
seq_printf(s, ", ");
nfs4_show_owner(s, oo);
seq_printf(s, " }\n");
- nfsd_file_put(file);
-
+out:
+ spin_unlock(&nf->fi_lock);
return 0;
}
@@ -2575,9 +2589,10 @@ static int nfs4_show_deleg(struct seq_file *s, struct nfs4_stid *st)
ds = delegstateid(st);
nf = st->sc_file;
- file = find_deleg_file(nf);
+ spin_lock(&nf->fi_lock);
+ file = find_deleg_file_locked(nf);
if (!file)
- return 0;
+ goto out;
seq_printf(s, "- ");
nfs4_show_stateid(s, &st->sc_stateid);
@@ -2593,8 +2608,8 @@ static int nfs4_show_deleg(struct seq_file *s, struct nfs4_stid *st)
seq_printf(s, ", ");
nfs4_show_fname(s, file);
seq_printf(s, " }\n");
- nfsd_file_put(file);
-
+out:
+ spin_unlock(&nf->fi_lock);
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 105/731] genirq/irqdesc: Dont try to remove non-existing sysfs files
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (103 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 104/731] nfsd: dont call nfsd_file_put from client states seqfile display Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 106/731] cpufreq: amd_freq_sensitivity: Add missing pci_dev_put() Greg Kroah-Hartman
` (636 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Thomas Gleixner,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 9049e1ca41983ab773d7ea244bee86d7835ec9f5 ]
Fault injection tests trigger warnings like this:
kernfs: can not remove 'chip_name', no directory
WARNING: CPU: 0 PID: 253 at fs/kernfs/dir.c:1616 kernfs_remove_by_name_ns+0xce/0xe0
RIP: 0010:kernfs_remove_by_name_ns+0xce/0xe0
Call Trace:
<TASK>
remove_files.isra.1+0x3f/0xb0
sysfs_remove_group+0x68/0xe0
sysfs_remove_groups+0x41/0x70
__kobject_del+0x45/0xc0
kobject_del+0x29/0x40
free_desc+0x42/0x70
irq_free_descs+0x5e/0x90
The reason is that the interrupt descriptor sysfs handling does not roll
back on a failing kobject_add() during allocation. If the descriptor is
freed later on, kobject_del() is invoked with a not added kobject resulting
in the above warnings.
A proper rollback in case of a kobject_add() failure would be the straight
forward solution. But this is not possible due to the way how interrupt
descriptor sysfs handling works.
Interrupt descriptors are allocated before sysfs becomes available. So the
sysfs files for the early allocated descriptors are added later in the boot
process. At this point there can be nothing useful done about a failing
kobject_add(). For consistency the interrupt descriptor allocation always
treats kobject_add() failures as non-critical and just emits a warning.
To solve this problem, keep track in the interrupt descriptor whether
kobject_add() was successful or not and make the invocation of
kobject_del() conditional on that.
[ tglx: Massage changelog, comments and use a state bit. ]
Fixes: ecb3f394c5db ("genirq: Expose interrupt information through sysfs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221128151612.1786122-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/irq/internals.h | 2 ++
kernel/irq/irqdesc.c | 15 +++++++++------
2 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index e58342ace11f..f1d83a8b4417 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -52,6 +52,7 @@ enum {
* IRQS_PENDING - irq is pending and replayed later
* IRQS_SUSPENDED - irq is suspended
* IRQS_NMI - irq line is used to deliver NMIs
+ * IRQS_SYSFS - descriptor has been added to sysfs
*/
enum {
IRQS_AUTODETECT = 0x00000001,
@@ -64,6 +65,7 @@ enum {
IRQS_SUSPENDED = 0x00000800,
IRQS_TIMINGS = 0x00001000,
IRQS_NMI = 0x00002000,
+ IRQS_SYSFS = 0x00004000,
};
#include "debug.h"
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 21b3ac2a29d2..7a45fd593245 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -288,22 +288,25 @@ static void irq_sysfs_add(int irq, struct irq_desc *desc)
if (irq_kobj_base) {
/*
* Continue even in case of failure as this is nothing
- * crucial.
+ * crucial and failures in the late irq_sysfs_init()
+ * cannot be rolled back.
*/
if (kobject_add(&desc->kobj, irq_kobj_base, "%d", irq))
pr_warn("Failed to add kobject for irq %d\n", irq);
+ else
+ desc->istate |= IRQS_SYSFS;
}
}
static void irq_sysfs_del(struct irq_desc *desc)
{
/*
- * If irq_sysfs_init() has not yet been invoked (early boot), then
- * irq_kobj_base is NULL and the descriptor was never added.
- * kobject_del() complains about a object with no parent, so make
- * it conditional.
+ * Only invoke kobject_del() when kobject_add() was successfully
+ * invoked for the descriptor. This covers both early boot, where
+ * sysfs is not initialized yet, and the case of a failed
+ * kobject_add() invocation.
*/
- if (irq_kobj_base)
+ if (desc->istate & IRQS_SYSFS)
kobject_del(&desc->kobj);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 106/731] cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (104 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 105/731] genirq/irqdesc: Dont try to remove non-existing sysfs files Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 107/731] libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value Greg Kroah-Hartman
` (635 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang, Rafael J. Wysocki,
Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit 91fda1f88c0968f1491ab150bb01690525af150a ]
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
after using pci_get_device(). Let's add it.
Fixes: 59a3b3a8db16 ("cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpufreq/amd_freq_sensitivity.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/cpufreq/amd_freq_sensitivity.c b/drivers/cpufreq/amd_freq_sensitivity.c
index d0b10baf039a..151771129c7b 100644
--- a/drivers/cpufreq/amd_freq_sensitivity.c
+++ b/drivers/cpufreq/amd_freq_sensitivity.c
@@ -124,6 +124,8 @@ static int __init amd_freq_sensitivity_init(void)
if (!pcidev) {
if (!boot_cpu_has(X86_FEATURE_PROC_FEEDBACK))
return -ENODEV;
+ } else {
+ pci_dev_put(pcidev);
}
if (rdmsrl_safe(MSR_AMD64_FREQ_SENSITIVITY_ACTUAL, &val))
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 107/731] libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (105 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 106/731] cpufreq: amd_freq_sensitivity: Add missing pci_dev_put() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 108/731] lib/notifier-error-inject: fix error when writing -errno to debugfs file Greg Kroah-Hartman
` (634 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Akinobu Mita, Zhao Gongyi,
David Hildenbrand, Alexander Viro, Jonathan Corbet,
Oscar Salvador, Rafael J. Wysocki, Shuah Khan, Wei Yongjun,
Yicong Yang, Andrew Morton, Sasha Levin
From: Akinobu Mita <akinobu.mita@gmail.com>
[ Upstream commit 2e41f274f9aa71cdcc69dc1f26a3f9304a651804 ]
Patch series "fix error when writing negative value to simple attribute
files".
The simple attribute files do not accept a negative value since the commit
488dac0c9237 ("libfs: fix error cast of negative value in
simple_attr_write()"), but some attribute files want to accept a negative
value.
This patch (of 3):
The simple attribute files do not accept a negative value since the commit
488dac0c9237 ("libfs: fix error cast of negative value in
simple_attr_write()"), so we have to use a 64-bit value to write a
negative value.
This adds DEFINE_SIMPLE_ATTRIBUTE_SIGNED for a signed value.
Link: https://lkml.kernel.org/r/20220919172418.45257-1-akinobu.mita@gmail.com
Link: https://lkml.kernel.org/r/20220919172418.45257-2-akinobu.mita@gmail.com
Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/libfs.c | 22 +++++++++++++++++++---
include/linux/fs.h | 12 ++++++++++--
2 files changed, 29 insertions(+), 5 deletions(-)
diff --git a/fs/libfs.c b/fs/libfs.c
index 51b4de3b3447..7bb5d90319cc 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -967,8 +967,8 @@ ssize_t simple_attr_read(struct file *file, char __user *buf,
EXPORT_SYMBOL_GPL(simple_attr_read);
/* interpret the buffer as a number to call the set function with */
-ssize_t simple_attr_write(struct file *file, const char __user *buf,
- size_t len, loff_t *ppos)
+static ssize_t simple_attr_write_xsigned(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos, bool is_signed)
{
struct simple_attr *attr;
unsigned long long val;
@@ -989,7 +989,10 @@ ssize_t simple_attr_write(struct file *file, const char __user *buf,
goto out;
attr->set_buf[size] = '\0';
- ret = kstrtoull(attr->set_buf, 0, &val);
+ if (is_signed)
+ ret = kstrtoll(attr->set_buf, 0, &val);
+ else
+ ret = kstrtoull(attr->set_buf, 0, &val);
if (ret)
goto out;
ret = attr->set(attr->data, val);
@@ -999,8 +1002,21 @@ ssize_t simple_attr_write(struct file *file, const char __user *buf,
mutex_unlock(&attr->mutex);
return ret;
}
+
+ssize_t simple_attr_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ return simple_attr_write_xsigned(file, buf, len, ppos, false);
+}
EXPORT_SYMBOL_GPL(simple_attr_write);
+ssize_t simple_attr_write_signed(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ return simple_attr_write_xsigned(file, buf, len, ppos, true);
+}
+EXPORT_SYMBOL_GPL(simple_attr_write_signed);
+
/**
* generic_fh_to_dentry - generic helper for the fh_to_dentry export operation
* @sb: filesystem to do the file handle conversion on
diff --git a/include/linux/fs.h b/include/linux/fs.h
index d55fdc02f82d..68fcf3ec9cf6 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3507,7 +3507,7 @@ void simple_transaction_set(struct file *file, size_t n);
* All attributes contain a text representation of a numeric value
* that are accessed with the get() and set() functions.
*/
-#define DEFINE_SIMPLE_ATTRIBUTE(__fops, __get, __set, __fmt) \
+#define DEFINE_SIMPLE_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, __is_signed) \
static int __fops ## _open(struct inode *inode, struct file *file) \
{ \
__simple_attr_check_format(__fmt, 0ull); \
@@ -3518,10 +3518,16 @@ static const struct file_operations __fops = { \
.open = __fops ## _open, \
.release = simple_attr_release, \
.read = simple_attr_read, \
- .write = simple_attr_write, \
+ .write = (__is_signed) ? simple_attr_write_signed : simple_attr_write, \
.llseek = generic_file_llseek, \
}
+#define DEFINE_SIMPLE_ATTRIBUTE(__fops, __get, __set, __fmt) \
+ DEFINE_SIMPLE_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, false)
+
+#define DEFINE_SIMPLE_ATTRIBUTE_SIGNED(__fops, __get, __set, __fmt) \
+ DEFINE_SIMPLE_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, true)
+
static inline __printf(1, 2)
void __simple_attr_check_format(const char *fmt, ...)
{
@@ -3536,6 +3542,8 @@ ssize_t simple_attr_read(struct file *file, char __user *buf,
size_t len, loff_t *ppos);
ssize_t simple_attr_write(struct file *file, const char __user *buf,
size_t len, loff_t *ppos);
+ssize_t simple_attr_write_signed(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos);
struct ctl_table;
int proc_nr_files(struct ctl_table *table, int write,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 108/731] lib/notifier-error-inject: fix error when writing -errno to debugfs file
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (106 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 107/731] libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 109/731] debugfs: fix error when writing negative value to atomic_t " Greg Kroah-Hartman
` (633 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Akinobu Mita, Zhao Gongyi,
David Hildenbrand, Alexander Viro, Jonathan Corbet,
Oscar Salvador, Rafael J. Wysocki, Shuah Khan, Wei Yongjun,
Yicong Yang, Andrew Morton, Sasha Levin
From: Akinobu Mita <akinobu.mita@gmail.com>
[ Upstream commit f883c3edd2c432a2931ec8773c70a570115a50fe ]
The simple attribute files do not accept a negative value since the commit
488dac0c9237 ("libfs: fix error cast of negative value in
simple_attr_write()").
This restores the previous behaviour by using newly introduced
DEFINE_SIMPLE_ATTRIBUTE_SIGNED instead of DEFINE_SIMPLE_ATTRIBUTE.
Link: https://lkml.kernel.org/r/20220919172418.45257-3-akinobu.mita@gmail.com
Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/notifier-error-inject.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/notifier-error-inject.c b/lib/notifier-error-inject.c
index 21016b32d313..2b24ea6c9497 100644
--- a/lib/notifier-error-inject.c
+++ b/lib/notifier-error-inject.c
@@ -15,7 +15,7 @@ static int debugfs_errno_get(void *data, u64 *val)
return 0;
}
-DEFINE_SIMPLE_ATTRIBUTE(fops_errno, debugfs_errno_get, debugfs_errno_set,
+DEFINE_SIMPLE_ATTRIBUTE_SIGNED(fops_errno, debugfs_errno_get, debugfs_errno_set,
"%lld\n");
static struct dentry *debugfs_create_errno(const char *name, umode_t mode,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 109/731] debugfs: fix error when writing negative value to atomic_t debugfs file
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (107 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 108/731] lib/notifier-error-inject: fix error when writing -errno to debugfs file Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 110/731] rapidio: fix possible name leaks when rio_add_device() fails Greg Kroah-Hartman
` (632 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Akinobu Mita, Zhao Gongyi,
David Hildenbrand, Alexander Viro, Jonathan Corbet,
Oscar Salvador, Rafael J. Wysocki, Shuah Khan, Wei Yongjun,
Yicong Yang, Andrew Morton, Sasha Levin
From: Akinobu Mita <akinobu.mita@gmail.com>
[ Upstream commit d472cf797c4e268613dbce5ec9b95d0bcae19ecb ]
The simple attribute files do not accept a negative value since the commit
488dac0c9237 ("libfs: fix error cast of negative value in
simple_attr_write()"), so we have to use a 64-bit value to write a
negative value for a debugfs file created by debugfs_create_atomic_t().
This restores the previous behaviour by introducing
DEFINE_DEBUGFS_ATTRIBUTE_SIGNED for a signed value.
Link: https://lkml.kernel.org/r/20220919172418.45257-4-akinobu.mita@gmail.com
Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../fault-injection/fault-injection.rst | 10 +++----
fs/debugfs/file.c | 28 +++++++++++++++----
include/linux/debugfs.h | 19 +++++++++++--
3 files changed, 43 insertions(+), 14 deletions(-)
diff --git a/Documentation/fault-injection/fault-injection.rst b/Documentation/fault-injection/fault-injection.rst
index 4a25c5eb6f07..8c47847755a6 100644
--- a/Documentation/fault-injection/fault-injection.rst
+++ b/Documentation/fault-injection/fault-injection.rst
@@ -83,9 +83,7 @@ configuration of fault-injection capabilities.
- /sys/kernel/debug/fail*/times:
specifies how many times failures may happen at most. A value of -1
- means "no limit". Note, though, that this file only accepts unsigned
- values. So, if you want to specify -1, you better use 'printf' instead
- of 'echo', e.g.: $ printf %#x -1 > times
+ means "no limit".
- /sys/kernel/debug/fail*/space:
@@ -277,7 +275,7 @@ Application Examples
echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
echo 10 > /sys/kernel/debug/$FAILTYPE/probability
echo 100 > /sys/kernel/debug/$FAILTYPE/interval
- printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+ echo -1 > /sys/kernel/debug/$FAILTYPE/times
echo 0 > /sys/kernel/debug/$FAILTYPE/space
echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
@@ -331,7 +329,7 @@ Application Examples
echo N > /sys/kernel/debug/$FAILTYPE/task-filter
echo 10 > /sys/kernel/debug/$FAILTYPE/probability
echo 100 > /sys/kernel/debug/$FAILTYPE/interval
- printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+ echo -1 > /sys/kernel/debug/$FAILTYPE/times
echo 0 > /sys/kernel/debug/$FAILTYPE/space
echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
@@ -362,7 +360,7 @@ Application Examples
echo N > /sys/kernel/debug/$FAILTYPE/task-filter
echo 100 > /sys/kernel/debug/$FAILTYPE/probability
echo 0 > /sys/kernel/debug/$FAILTYPE/interval
- printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+ echo -1 > /sys/kernel/debug/$FAILTYPE/times
echo 0 > /sys/kernel/debug/$FAILTYPE/space
echo 1 > /sys/kernel/debug/$FAILTYPE/verbose
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index 950c63fa4d0b..38930d9b0bb7 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -378,8 +378,8 @@ ssize_t debugfs_attr_read(struct file *file, char __user *buf,
}
EXPORT_SYMBOL_GPL(debugfs_attr_read);
-ssize_t debugfs_attr_write(struct file *file, const char __user *buf,
- size_t len, loff_t *ppos)
+static ssize_t debugfs_attr_write_xsigned(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos, bool is_signed)
{
struct dentry *dentry = F_DENTRY(file);
ssize_t ret;
@@ -387,12 +387,28 @@ ssize_t debugfs_attr_write(struct file *file, const char __user *buf,
ret = debugfs_file_get(dentry);
if (unlikely(ret))
return ret;
- ret = simple_attr_write(file, buf, len, ppos);
+ if (is_signed)
+ ret = simple_attr_write_signed(file, buf, len, ppos);
+ else
+ ret = simple_attr_write(file, buf, len, ppos);
debugfs_file_put(dentry);
return ret;
}
+
+ssize_t debugfs_attr_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ return debugfs_attr_write_xsigned(file, buf, len, ppos, false);
+}
EXPORT_SYMBOL_GPL(debugfs_attr_write);
+ssize_t debugfs_attr_write_signed(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ return debugfs_attr_write_xsigned(file, buf, len, ppos, true);
+}
+EXPORT_SYMBOL_GPL(debugfs_attr_write_signed);
+
static struct dentry *debugfs_create_mode_unsafe(const char *name, umode_t mode,
struct dentry *parent, void *value,
const struct file_operations *fops,
@@ -738,11 +754,11 @@ static int debugfs_atomic_t_get(void *data, u64 *val)
*val = atomic_read((atomic_t *)data);
return 0;
}
-DEFINE_DEBUGFS_ATTRIBUTE(fops_atomic_t, debugfs_atomic_t_get,
+DEFINE_DEBUGFS_ATTRIBUTE_SIGNED(fops_atomic_t, debugfs_atomic_t_get,
debugfs_atomic_t_set, "%lld\n");
-DEFINE_DEBUGFS_ATTRIBUTE(fops_atomic_t_ro, debugfs_atomic_t_get, NULL,
+DEFINE_DEBUGFS_ATTRIBUTE_SIGNED(fops_atomic_t_ro, debugfs_atomic_t_get, NULL,
"%lld\n");
-DEFINE_DEBUGFS_ATTRIBUTE(fops_atomic_t_wo, NULL, debugfs_atomic_t_set,
+DEFINE_DEBUGFS_ATTRIBUTE_SIGNED(fops_atomic_t_wo, NULL, debugfs_atomic_t_set,
"%lld\n");
/**
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index f60674692d36..ea2d919fd9c7 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -45,7 +45,7 @@ struct debugfs_u32_array {
extern struct dentry *arch_debugfs_dir;
-#define DEFINE_DEBUGFS_ATTRIBUTE(__fops, __get, __set, __fmt) \
+#define DEFINE_DEBUGFS_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, __is_signed) \
static int __fops ## _open(struct inode *inode, struct file *file) \
{ \
__simple_attr_check_format(__fmt, 0ull); \
@@ -56,10 +56,16 @@ static const struct file_operations __fops = { \
.open = __fops ## _open, \
.release = simple_attr_release, \
.read = debugfs_attr_read, \
- .write = debugfs_attr_write, \
+ .write = (__is_signed) ? debugfs_attr_write_signed : debugfs_attr_write, \
.llseek = no_llseek, \
}
+#define DEFINE_DEBUGFS_ATTRIBUTE(__fops, __get, __set, __fmt) \
+ DEFINE_DEBUGFS_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, false)
+
+#define DEFINE_DEBUGFS_ATTRIBUTE_SIGNED(__fops, __get, __set, __fmt) \
+ DEFINE_DEBUGFS_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, true)
+
typedef struct vfsmount *(*debugfs_automount_t)(struct dentry *, void *);
#if defined(CONFIG_DEBUG_FS)
@@ -102,6 +108,8 @@ ssize_t debugfs_attr_read(struct file *file, char __user *buf,
size_t len, loff_t *ppos);
ssize_t debugfs_attr_write(struct file *file, const char __user *buf,
size_t len, loff_t *ppos);
+ssize_t debugfs_attr_write_signed(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos);
struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
struct dentry *new_dir, const char *new_name);
@@ -254,6 +262,13 @@ static inline ssize_t debugfs_attr_write(struct file *file,
return -ENODEV;
}
+static inline ssize_t debugfs_attr_write_signed(struct file *file,
+ const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ return -ENODEV;
+}
+
static inline struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
struct dentry *new_dir, char *new_name)
{
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 110/731] rapidio: fix possible name leaks when rio_add_device() fails
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (108 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 109/731] debugfs: fix error when writing negative value to atomic_t " Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 111/731] rapidio: rio: fix possible name leak in rio_register_mport() Greg Kroah-Hartman
` (631 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Alexandre Bounine,
Matt Porter, Andrew Morton, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit f9574cd48679926e2a569e1957a5a1bcc8a719ac ]
Patch series "rapidio: fix three possible memory leaks".
This patchset fixes three name leaks in error handling.
- patch #1 fixes two name leaks while rio_add_device() fails.
- patch #2 fixes a name leak while rio_register_mport() fails.
This patch (of 2):
If rio_add_device() returns error, the name allocated by dev_set_name()
need be freed. It should use put_device() to give up the reference in the
error path, so that the name can be freed in kobject_cleanup(), and the
'rdev' can be freed in rio_release_dev().
Link: https://lkml.kernel.org/r/20221114152636.2939035-1-yangyingliang@huawei.com
Link: https://lkml.kernel.org/r/20221114152636.2939035-2-yangyingliang@huawei.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rapidio/devices/rio_mport_cdev.c | 7 +++++--
drivers/rapidio/rio-scan.c | 8 ++++++--
2 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c
index 94331d999d27..48cd9b7f3b89 100644
--- a/drivers/rapidio/devices/rio_mport_cdev.c
+++ b/drivers/rapidio/devices/rio_mport_cdev.c
@@ -1803,8 +1803,11 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
0, 0xffff);
err = rio_add_device(rdev);
- if (err)
- goto cleanup;
+ if (err) {
+ put_device(&rdev->dev);
+ return err;
+ }
+
rio_dev_get(rdev);
return 0;
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 19b0c33f4a62..fdcf742b2adb 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -454,8 +454,12 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
0, 0xffff);
ret = rio_add_device(rdev);
- if (ret)
- goto cleanup;
+ if (ret) {
+ if (rswitch)
+ kfree(rswitch->route_table);
+ put_device(&rdev->dev);
+ return NULL;
+ }
rio_dev_get(rdev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 111/731] rapidio: rio: fix possible name leak in rio_register_mport()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (109 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 110/731] rapidio: fix possible name leaks when rio_add_device() fails Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 112/731] clocksource/drivers/sh_cmt: Access registers according to spec Greg Kroah-Hartman
` (630 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Alexandre Bounine,
Matt Porter, Andrew Morton, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit e92a216d16bde65d21a3227e0fb2aa0794576525 ]
If device_register() returns error, the name allocated by dev_set_name()
need be freed. It should use put_device() to give up the reference in the
error path, so that the name can be freed in kobject_cleanup(), and
list_del() is called to delete the port from rio_mports.
Link: https://lkml.kernel.org/r/20221114152636.2939035-3-yangyingliang@huawei.com
Fixes: 2aaf308b95b2 ("rapidio: rework device hierarchy and introduce mport class of devices")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rapidio/rio.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index e74cf09eeff0..9544b8ee0c96 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -2186,11 +2186,16 @@ int rio_register_mport(struct rio_mport *port)
atomic_set(&port->state, RIO_DEVICE_RUNNING);
res = device_register(&port->dev);
- if (res)
+ if (res) {
dev_err(&port->dev, "RIO: mport%d registration failed ERR=%d\n",
port->id, res);
- else
+ mutex_lock(&rio_mport_list_lock);
+ list_del(&port->node);
+ mutex_unlock(&rio_mport_list_lock);
+ put_device(&port->dev);
+ } else {
dev_dbg(&port->dev, "RIO: registered mport%d\n", port->id);
+ }
return res;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 112/731] clocksource/drivers/sh_cmt: Access registers according to spec
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (110 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 111/731] rapidio: rio: fix possible name leak in rio_register_mport() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 113/731] mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem Greg Kroah-Hartman
` (629 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wolfram Sang, Thomas Gleixner, Sasha Levin
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
[ Upstream commit 3f44f7156f59cae06e9160eafb5d8b2dfd09e639 ]
Documentation for most CMTs say that it takes two input clocks before
changes propagate to the timer. This is especially relevant when the timer
is stopped to change further settings.
Implement the delays according to the spec. To avoid unnecessary delays in
atomic mode, also check if the to-be-written value actually differs.
CMCNT is a bit special because testing showed that it requires 3 cycles to
propagate, which affects all CMTs. Also, the WRFLAG needs to be checked
before writing. This fixes "cannot clear CMCNT" messages which occur often
on R-Car Gen4 SoCs, but only very rarely on older SoCs for some reason.
Fixes: 81b3b2711072 ("clocksource: sh_cmt: Add support for multiple channels per device")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130210609.7718-1-wsa+renesas@sang-engineering.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clocksource/sh_cmt.c | 88 ++++++++++++++++++++++--------------
1 file changed, 55 insertions(+), 33 deletions(-)
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index dd0956ad969c..d35548aa026f 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/module.h>
@@ -116,6 +117,7 @@ struct sh_cmt_device {
void __iomem *mapbase;
struct clk *clk;
unsigned long rate;
+ unsigned int reg_delay;
raw_spinlock_t lock; /* Protect the shared start/stop register */
@@ -247,10 +249,17 @@ static inline u32 sh_cmt_read_cmstr(struct sh_cmt_channel *ch)
static inline void sh_cmt_write_cmstr(struct sh_cmt_channel *ch, u32 value)
{
- if (ch->iostart)
- ch->cmt->info->write_control(ch->iostart, 0, value);
- else
- ch->cmt->info->write_control(ch->cmt->mapbase, 0, value);
+ u32 old_value = sh_cmt_read_cmstr(ch);
+
+ if (value != old_value) {
+ if (ch->iostart) {
+ ch->cmt->info->write_control(ch->iostart, 0, value);
+ udelay(ch->cmt->reg_delay);
+ } else {
+ ch->cmt->info->write_control(ch->cmt->mapbase, 0, value);
+ udelay(ch->cmt->reg_delay);
+ }
+ }
}
static inline u32 sh_cmt_read_cmcsr(struct sh_cmt_channel *ch)
@@ -260,7 +269,12 @@ static inline u32 sh_cmt_read_cmcsr(struct sh_cmt_channel *ch)
static inline void sh_cmt_write_cmcsr(struct sh_cmt_channel *ch, u32 value)
{
- ch->cmt->info->write_control(ch->ioctrl, CMCSR, value);
+ u32 old_value = sh_cmt_read_cmcsr(ch);
+
+ if (value != old_value) {
+ ch->cmt->info->write_control(ch->ioctrl, CMCSR, value);
+ udelay(ch->cmt->reg_delay);
+ }
}
static inline u32 sh_cmt_read_cmcnt(struct sh_cmt_channel *ch)
@@ -268,14 +282,33 @@ static inline u32 sh_cmt_read_cmcnt(struct sh_cmt_channel *ch)
return ch->cmt->info->read_count(ch->ioctrl, CMCNT);
}
-static inline void sh_cmt_write_cmcnt(struct sh_cmt_channel *ch, u32 value)
+static inline int sh_cmt_write_cmcnt(struct sh_cmt_channel *ch, u32 value)
{
+ /* Tests showed that we need to wait 3 clocks here */
+ unsigned int cmcnt_delay = DIV_ROUND_UP(3 * ch->cmt->reg_delay, 2);
+ u32 reg;
+
+ if (ch->cmt->info->model > SH_CMT_16BIT) {
+ int ret = read_poll_timeout_atomic(sh_cmt_read_cmcsr, reg,
+ !(reg & SH_CMT32_CMCSR_WRFLG),
+ 1, cmcnt_delay, false, ch);
+ if (ret < 0)
+ return ret;
+ }
+
ch->cmt->info->write_count(ch->ioctrl, CMCNT, value);
+ udelay(cmcnt_delay);
+ return 0;
}
static inline void sh_cmt_write_cmcor(struct sh_cmt_channel *ch, u32 value)
{
- ch->cmt->info->write_count(ch->ioctrl, CMCOR, value);
+ u32 old_value = ch->cmt->info->read_count(ch->ioctrl, CMCOR);
+
+ if (value != old_value) {
+ ch->cmt->info->write_count(ch->ioctrl, CMCOR, value);
+ udelay(ch->cmt->reg_delay);
+ }
}
static u32 sh_cmt_get_counter(struct sh_cmt_channel *ch, u32 *has_wrapped)
@@ -319,7 +352,7 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_channel *ch, int start)
static int sh_cmt_enable(struct sh_cmt_channel *ch)
{
- int k, ret;
+ int ret;
dev_pm_syscore_device(&ch->cmt->pdev->dev, true);
@@ -347,26 +380,9 @@ static int sh_cmt_enable(struct sh_cmt_channel *ch)
}
sh_cmt_write_cmcor(ch, 0xffffffff);
- sh_cmt_write_cmcnt(ch, 0);
-
- /*
- * According to the sh73a0 user's manual, as CMCNT can be operated
- * only by the RCLK (Pseudo 32 kHz), there's one restriction on
- * modifying CMCNT register; two RCLK cycles are necessary before
- * this register is either read or any modification of the value
- * it holds is reflected in the LSI's actual operation.
- *
- * While at it, we're supposed to clear out the CMCNT as of this
- * moment, so make sure it's processed properly here. This will
- * take RCLKx2 at maximum.
- */
- for (k = 0; k < 100; k++) {
- if (!sh_cmt_read_cmcnt(ch))
- break;
- udelay(1);
- }
+ ret = sh_cmt_write_cmcnt(ch, 0);
- if (sh_cmt_read_cmcnt(ch)) {
+ if (ret || sh_cmt_read_cmcnt(ch)) {
dev_err(&ch->cmt->pdev->dev, "ch%u: cannot clear CMCNT\n",
ch->index);
ret = -ETIMEDOUT;
@@ -987,8 +1003,8 @@ MODULE_DEVICE_TABLE(of, sh_cmt_of_table);
static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
{
- unsigned int mask;
- unsigned int i;
+ unsigned int mask, i;
+ unsigned long rate;
int ret;
cmt->pdev = pdev;
@@ -1024,10 +1040,16 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
if (ret < 0)
goto err_clk_unprepare;
- if (cmt->info->width == 16)
- cmt->rate = clk_get_rate(cmt->clk) / 512;
- else
- cmt->rate = clk_get_rate(cmt->clk) / 8;
+ rate = clk_get_rate(cmt->clk);
+ if (!rate) {
+ ret = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ /* We shall wait 2 input clks after register writes */
+ if (cmt->info->model >= SH_CMT_48BIT)
+ cmt->reg_delay = DIV_ROUND_UP(2UL * USEC_PER_SEC, rate);
+ cmt->rate = rate / (cmt->info->width == 16 ? 512 : 8);
/* Map the memory resource(s). */
ret = sh_cmt_map_memory(cmt);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 113/731] mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (111 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 112/731] clocksource/drivers/sh_cmt: Access registers according to spec Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 114/731] mips: ralink: mt7621: soc queries and tests as functions Greg Kroah-Hartman
` (628 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Thomson, Thomas Bogendoerfer,
Sasha Levin
From: John Thomson <git@johnthomson.fastmail.com.au>
[ Upstream commit a2cab953b4c077cc02878d424466d3a6eac32aaf ]
So that MT7621_SYSC_BASE can be used later in multiple functions without
needing to repeat this __iomem declaration each time
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/include/asm/mach-ralink/mt7621.h | 4 +++-
arch/mips/ralink/mt7621.c | 7 +++----
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/mips/include/asm/mach-ralink/mt7621.h b/arch/mips/include/asm/mach-ralink/mt7621.h
index 6bbf082dd149..79d5bb0e06d6 100644
--- a/arch/mips/include/asm/mach-ralink/mt7621.h
+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
@@ -7,10 +7,12 @@
#ifndef _MT7621_REGS_H_
#define _MT7621_REGS_H_
+#define IOMEM(x) ((void __iomem *)(KSEG1ADDR(x)))
+
#define MT7621_PALMBUS_BASE 0x1C000000
#define MT7621_PALMBUS_SIZE 0x03FFFFFF
-#define MT7621_SYSC_BASE 0x1E000000
+#define MT7621_SYSC_BASE IOMEM(0x1E000000)
#define SYSC_REG_CHIP_NAME0 0x00
#define SYSC_REG_CHIP_NAME1 0x04
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
index 4c8378661219..af66886f1366 100644
--- a/arch/mips/ralink/mt7621.c
+++ b/arch/mips/ralink/mt7621.c
@@ -95,7 +95,6 @@ static void soc_dev_init(struct ralink_soc_info *soc_info, u32 rev)
void __init prom_soc_init(struct ralink_soc_info *soc_info)
{
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
unsigned char *name = NULL;
u32 n0;
u32 n1;
@@ -123,8 +122,8 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
__sync();
}
- n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
- n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+ n0 = __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME1);
if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
name = "MT7621";
@@ -133,7 +132,7 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
}
ralink_soc = MT762X_SOC_MT7621AT;
- rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+ rev = __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_REV);
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"MediaTek %s ver:%u eco:%u",
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 114/731] mips: ralink: mt7621: soc queries and tests as functions
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (112 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 113/731] mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 115/731] mips: ralink: mt7621: do not use kzalloc too early Greg Kroah-Hartman
` (627 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Thomson, Thomas Bogendoerfer,
Sasha Levin
From: John Thomson <git@johnthomson.fastmail.com.au>
[ Upstream commit b4767d4c072583dec987225b6fe3f5524a735f42 ]
Move the SoC register value queries and tests to specific functions,
to remove repetition of logic
No functional changes intended
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/ralink/mt7621.c | 86 +++++++++++++++++++++++++++------------
1 file changed, 61 insertions(+), 25 deletions(-)
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
index af66886f1366..6b4c291d6d1b 100644
--- a/arch/mips/ralink/mt7621.c
+++ b/arch/mips/ralink/mt7621.c
@@ -66,7 +66,57 @@ void __init ralink_of_remap(void)
panic("Failed to remap core resources");
}
-static void soc_dev_init(struct ralink_soc_info *soc_info, u32 rev)
+static unsigned int __init mt7621_get_soc_name0(void)
+{
+ return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
+
+static unsigned int __init mt7621_get_soc_name1(void)
+{
+ return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
+
+static bool __init mt7621_soc_valid(void)
+{
+ if (mt7621_get_soc_name0() == MT7621_CHIP_NAME0 &&
+ mt7621_get_soc_name1() == MT7621_CHIP_NAME1)
+ return true;
+ else
+ return false;
+}
+
+static const char __init *mt7621_get_soc_id(void)
+{
+ if (mt7621_soc_valid())
+ return "MT7621";
+ else
+ return "invalid";
+}
+
+static unsigned int __init mt7621_get_soc_rev(void)
+{
+ return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_REV);
+}
+
+static unsigned int __init mt7621_get_soc_ver(void)
+{
+ return (mt7621_get_soc_rev() >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK;
+}
+
+static unsigned int __init mt7621_get_soc_eco(void)
+{
+ return (mt7621_get_soc_rev() & CHIP_REV_ECO_MASK);
+}
+
+static const char __init *mt7621_get_soc_revision(void)
+{
+ if (mt7621_get_soc_rev() == 1 && mt7621_get_soc_eco() == 1)
+ return "E2";
+ else
+ return "E1";
+}
+
+static void soc_dev_init(struct ralink_soc_info *soc_info)
{
struct soc_device *soc_dev;
struct soc_device_attribute *soc_dev_attr;
@@ -77,12 +127,7 @@ static void soc_dev_init(struct ralink_soc_info *soc_info, u32 rev)
soc_dev_attr->soc_id = "mt7621";
soc_dev_attr->family = "Ralink";
-
- if (((rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK) == 1 &&
- (rev & CHIP_REV_ECO_MASK) == 1)
- soc_dev_attr->revision = "E2";
- else
- soc_dev_attr->revision = "E1";
+ soc_dev_attr->revision = mt7621_get_soc_revision();
soc_dev_attr->data = soc_info;
@@ -95,11 +140,6 @@ static void soc_dev_init(struct ralink_soc_info *soc_info, u32 rev)
void __init prom_soc_init(struct ralink_soc_info *soc_info)
{
- unsigned char *name = NULL;
- u32 n0;
- u32 n1;
- u32 rev;
-
/* Early detection of CMP support */
mips_cm_probe();
mips_cpc_probe();
@@ -122,27 +162,23 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
__sync();
}
- n0 = __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME0);
- n1 = __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME1);
-
- if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
- name = "MT7621";
+ if (mt7621_soc_valid())
soc_info->compatible = "mediatek,mt7621-soc";
- } else {
- panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
- }
+ else
+ panic("mt7621: unknown SoC, n0:%08x n1:%08x\n",
+ mt7621_get_soc_name0(),
+ mt7621_get_soc_name1());
ralink_soc = MT762X_SOC_MT7621AT;
- rev = __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_REV);
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"MediaTek %s ver:%u eco:%u",
- name,
- (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
- (rev & CHIP_REV_ECO_MASK));
+ mt7621_get_soc_id(),
+ mt7621_get_soc_ver(),
+ mt7621_get_soc_eco());
soc_info->mem_detect = mt7621_memory_detect;
- soc_dev_init(soc_info, rev);
+ soc_dev_init(soc_info);
if (!register_cps_smp_ops())
return;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 115/731] mips: ralink: mt7621: do not use kzalloc too early
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (113 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 114/731] mips: ralink: mt7621: soc queries and tests as functions Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 116/731] futex: Move to kernel/futex/ Greg Kroah-Hartman
` (626 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Thomson, Thomas Bogendoerfer,
Sasha Levin
From: John Thomson <git@johnthomson.fastmail.com.au>
[ Upstream commit 7c18b64bba3bcad1be94b404f47b94a04b91ce79 ]
With CONFIG_SLUB=y, following commit 6edf2576a6cc ("mm/slub: enable
debugging memory wasting of kmalloc") mt7621 failed to boot very early,
without showing any console messages.
This exposed the pre-existing bug of mt7621.c using kzalloc before normal
memory management was available.
Prior to this slub change, there existed the unintended protection against
"kmem_cache *s" being NULL as slab_pre_alloc_hook() happened to
return NULL and bailed out of slab_alloc_node().
This allowed mt7621 prom_soc_init to fail in the soc_dev_init kzalloc,
but continue booting without the SOC_BUS driver device registered.
Console output from a DEBUG_ZBOOT vmlinuz kernel loading,
with mm/slub modified to warn on kmem_cache zero or null:
zimage at: 80B842A0 810B4BC0
Uncompressing Linux at load address 80001000
Copy device tree to address 80B80EE0
Now, booting the kernel...
[ 0.000000] Linux version 6.1.0-rc3+ (john@john)
(mipsel-buildroot-linux-gnu-gcc.br_real (Buildroot
2021.11-4428-g6b6741b) 12.2.0, GNU ld (GNU Binutils) 2.39) #73 SMP Wed
Nov 2 05:10:01 AEST 2022
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at mm/slub.c:3416
kmem_cache_alloc+0x5a4/0x5e8
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.1.0-rc3+ #73
[ 0.000000] Stack : 810fff78 80084d98 00000000 00000004 00000000
00000000 80889d04 80c90000
[ 0.000000] 80920000 807bd328 8089d368 80923bd3 00000000
00000001 80889cb0 00000000
[ 0.000000] 00000000 00000000 807bd328 8084bcb1 00000002
00000002 00000001 6d6f4320
[ 0.000000] 00000000 80c97d3d 80c97d68 fffffffc 807bd328
00000000 00000000 00000000
[ 0.000000] 00000000 a0000000 80910000 8110a0b4 00000000
00000020 80010000 80010000
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000] [<80008260>] show_stack+0x28/0xf0
[ 0.000000] [<8070c958>] dump_stack_lvl+0x60/0x80
[ 0.000000] [<8002e184>] __warn+0xc4/0xf8
[ 0.000000] [<8002e210>] warn_slowpath_fmt+0x58/0xa4
[ 0.000000] [<801c0fac>] kmem_cache_alloc+0x5a4/0x5e8
[ 0.000000] [<8092856c>] prom_soc_init+0x1fc/0x2b4
[ 0.000000] [<80928060>] prom_init+0x44/0xf0
[ 0.000000] [<80929214>] setup_arch+0x4c/0x6a8
[ 0.000000] [<809257e0>] start_kernel+0x88/0x7c0
[ 0.000000]
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] printk: bootconsole [early0] enabled
Allowing soc_device_register to work exposed oops in the mt7621 phy pci,
and pci controller drivers from soc_device_match_attr, due to missing
sentinels in the quirks tables. These were fixed with:
commit 819b885cd886 ("phy: ralink: mt7621-pci: add sentinel to quirks
table")
not yet applied ("PCI: mt7621: add sentinel to quirks table")
Link: https://lore.kernel.org/linux-mm/becf2ac3-2a90-4f3a-96d9-a70f67c66e4a@app.fastmail.com/
Fixes: 71b9b5e0130d ("MIPS: ralink: mt7621: introduce 'soc_device' initialization")
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/ralink/mt7621.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
index 6b4c291d6d1b..0db23bcf2a97 100644
--- a/arch/mips/ralink/mt7621.c
+++ b/arch/mips/ralink/mt7621.c
@@ -23,6 +23,7 @@
#define MT7621_MEM_TEST_PATTERN 0xaa5555aa
static u32 detect_magic __initdata;
+static struct ralink_soc_info *soc_info_ptr;
phys_addr_t mips_cpc_default_phys_base(void)
{
@@ -116,27 +117,30 @@ static const char __init *mt7621_get_soc_revision(void)
return "E1";
}
-static void soc_dev_init(struct ralink_soc_info *soc_info)
+static int __init mt7621_soc_dev_init(void)
{
struct soc_device *soc_dev;
struct soc_device_attribute *soc_dev_attr;
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
- return;
+ return -ENOMEM;
soc_dev_attr->soc_id = "mt7621";
soc_dev_attr->family = "Ralink";
soc_dev_attr->revision = mt7621_get_soc_revision();
- soc_dev_attr->data = soc_info;
+ soc_dev_attr->data = soc_info_ptr;
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev)) {
kfree(soc_dev_attr);
- return;
+ return PTR_ERR(soc_dev);
}
+
+ return 0;
}
+device_initcall(mt7621_soc_dev_init);
void __init prom_soc_init(struct ralink_soc_info *soc_info)
{
@@ -178,7 +182,7 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
soc_info->mem_detect = mt7621_memory_detect;
- soc_dev_init(soc_info);
+ soc_info_ptr = soc_info;
if (!register_cps_smp_ops())
return;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 116/731] futex: Move to kernel/futex/
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (114 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 115/731] mips: ralink: mt7621: do not use kzalloc too early Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 117/731] futex: Resend potentially swallowed owner death notification Greg Kroah-Hartman
` (625 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peter Zijlstra (Intel),
Thomas Gleixner, André Almeida, Sasha Levin
From: Peter Zijlstra <peterz@infradead.org>
[ Upstream commit 77e52ae35463521041906c510fe580d15663bb93 ]
In preparation for splitup..
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-2-andrealmeid@collabora.com
Stable-dep-of: 90d758896787 ("futex: Resend potentially swallowed owner death notification")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
MAINTAINERS | 2 +-
kernel/Makefile | 2 +-
kernel/futex/Makefile | 3 +++
kernel/{futex.c => futex/core.c} | 2 +-
4 files changed, 6 insertions(+), 3 deletions(-)
create mode 100644 kernel/futex/Makefile
rename kernel/{futex.c => futex/core.c} (99%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 1cf05aee91af..4f50a453e18a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7746,7 +7746,7 @@ F: Documentation/locking/*futex*
F: include/asm-generic/futex.h
F: include/linux/futex.h
F: include/uapi/linux/futex.h
-F: kernel/futex.c
+F: kernel/futex/*
F: tools/perf/bench/futex*
F: tools/testing/selftests/futex/
diff --git a/kernel/Makefile b/kernel/Makefile
index 0e119c52a2cd..599cb926449a 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -59,7 +59,7 @@ obj-$(CONFIG_FREEZER) += freezer.o
obj-$(CONFIG_PROFILING) += profile.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += time/
-obj-$(CONFIG_FUTEX) += futex.o
+obj-$(CONFIG_FUTEX) += futex/
obj-$(CONFIG_GENERIC_ISA_DMA) += dma.o
obj-$(CONFIG_SMP) += smp.o
ifneq ($(CONFIG_SMP),y)
diff --git a/kernel/futex/Makefile b/kernel/futex/Makefile
new file mode 100644
index 000000000000..b89ba3fba343
--- /dev/null
+++ b/kernel/futex/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-y += core.o
diff --git a/kernel/futex.c b/kernel/futex/core.c
similarity index 99%
rename from kernel/futex.c
rename to kernel/futex/core.c
index c15ad276fd15..f9bc9aa0ce1e 100644
--- a/kernel/futex.c
+++ b/kernel/futex/core.c
@@ -42,7 +42,7 @@
#include <asm/futex.h>
-#include "locking/rtmutex_common.h"
+#include "../locking/rtmutex_common.h"
/*
* READ this before attempting to hack on futexes!
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 117/731] futex: Resend potentially swallowed owner death notification
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (115 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 116/731] futex: Move to kernel/futex/ Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 118/731] cpu/hotplug: Make target_store() a nop when target == state Greg Kroah-Hartman
` (624 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexey Izbyshev, Thomas Gleixner,
Peter Zijlstra (Intel),
Sasha Levin
From: Alexey Izbyshev <izbyshev@ispras.ru>
[ Upstream commit 90d758896787048fa3d4209309d4800f3920e66f ]
Commit ca16d5bee598 ("futex: Prevent robust futex exit race") addressed
two cases when tasks waiting on a robust non-PI futex remained blocked
despite the futex not being owned anymore:
* if the owner died after writing zero to the futex word, but before
waking up a waiter
* if a task waiting on the futex was woken up, but died before updating
the futex word (effectively swallowing the notification without acting
on it)
In the second case, the task could be woken up either by the previous
owner (after the futex word was reset to zero) or by the kernel (after
the OWNER_DIED bit was set and the TID part of the futex word was reset
to zero) if the previous owner died without the resetting the futex.
Because the referenced commit wakes up a potential waiter only if the
whole futex word is zero, the latter subcase remains unaddressed.
Fix this by looking only at the TID part of the futex when deciding
whether a wake up is needed.
Fixes: ca16d5bee598 ("futex: Prevent robust futex exit race")
Signed-off-by: Alexey Izbyshev <izbyshev@ispras.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221111215439.248185-1-izbyshev@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/futex/core.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/kernel/futex/core.c b/kernel/futex/core.c
index f9bc9aa0ce1e..764e73622b38 100644
--- a/kernel/futex/core.c
+++ b/kernel/futex/core.c
@@ -3632,6 +3632,7 @@ static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr,
bool pi, bool pending_op)
{
u32 uval, nval, mval;
+ pid_t owner;
int err;
/* Futex address must be 32bit aligned */
@@ -3653,6 +3654,10 @@ static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr,
* 2. A woken up waiter is killed before it can acquire the
* futex in user space.
*
+ * In the second case, the wake up notification could be generated
+ * by the unlock path in user space after setting the futex value
+ * to zero or by the kernel after setting the OWNER_DIED bit below.
+ *
* In both cases the TID validation below prevents a wakeup of
* potential waiters which can cause these waiters to block
* forever.
@@ -3661,24 +3666,27 @@ static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr,
*
* 1) task->robust_list->list_op_pending != NULL
* @pending_op == true
- * 2) User space futex value == 0
+ * 2) The owner part of user space futex value == 0
* 3) Regular futex: @pi == false
*
* If these conditions are met, it is safe to attempt waking up a
* potential waiter without touching the user space futex value and
- * trying to set the OWNER_DIED bit. The user space futex value is
- * uncontended and the rest of the user space mutex state is
- * consistent, so a woken waiter will just take over the
- * uncontended futex. Setting the OWNER_DIED bit would create
- * inconsistent state and malfunction of the user space owner died
- * handling.
+ * trying to set the OWNER_DIED bit. If the futex value is zero,
+ * the rest of the user space mutex state is consistent, so a woken
+ * waiter will just take over the uncontended futex. Setting the
+ * OWNER_DIED bit would create inconsistent state and malfunction
+ * of the user space owner died handling. Otherwise, the OWNER_DIED
+ * bit is already set, and the woken waiter is expected to deal with
+ * this.
*/
- if (pending_op && !pi && !uval) {
+ owner = uval & FUTEX_TID_MASK;
+
+ if (pending_op && !pi && !owner) {
futex_wake(uaddr, 1, 1, FUTEX_BITSET_MATCH_ANY);
return 0;
}
- if ((uval & FUTEX_TID_MASK) != task_pid_vnr(curr))
+ if (owner != task_pid_vnr(curr))
return 0;
/*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 118/731] cpu/hotplug: Make target_store() a nop when target == state
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (116 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 117/731] futex: Resend potentially swallowed owner death notification Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 119/731] cpu/hotplug: Do not bail-out in DYING/STARTING sections Greg Kroah-Hartman
` (623 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Phil Auld, Thomas Gleixner,
Valentin Schneider, Sasha Levin
From: Phil Auld <pauld@redhat.com>
[ Upstream commit 64ea6e44f85b9b75925ebe1ba0e6e8430cc4e06f ]
Writing the current state back in hotplug/target calls cpu_down()
which will set cpu dying even when it isn't and then nothing will
ever clear it. A stress test that reads values and writes them back
for all cpu device files in sysfs will trigger the BUG() in
select_fallback_rq once all cpus are marked as dying.
kernel/cpu.c::target_store()
...
if (st->state < target)
ret = cpu_up(dev->id, target);
else
ret = cpu_down(dev->id, target);
cpu_down() -> cpu_set_state()
bool bringup = st->state < target;
...
if (cpu_dying(cpu) != !bringup)
set_cpu_dying(cpu, !bringup);
Fix this by letting state==target fall through in the target_store()
conditional. Also make sure st->target == target in that case.
Fixes: 757c989b9994 ("cpu/hotplug: Make target state writeable")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20221117162329.3164999-2-pauld@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/cpu.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/kernel/cpu.c b/kernel/cpu.c
index da871eb07566..e08d207011dd 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -2315,8 +2315,10 @@ static ssize_t target_store(struct device *dev, struct device_attribute *attr,
if (st->state < target)
ret = cpu_up(dev->id, target);
- else
+ else if (st->state > target)
ret = cpu_down(dev->id, target);
+ else if (WARN_ON(st->target != target))
+ st->target = target;
out:
unlock_device_hotplug();
return ret ? ret : count;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 119/731] cpu/hotplug: Do not bail-out in DYING/STARTING sections
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (117 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 118/731] cpu/hotplug: Make target_store() a nop when target == state Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 120/731] clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock() Greg Kroah-Hartman
` (622 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Derek Dolney, Vincent Donnefort,
Thomas Gleixner, Valentin Schneider, Sasha Levin
From: Vincent Donnefort <vdonnefort@google.com>
[ Upstream commit 6f855b39e4602b6b42a8e5cbcfefb8a1b8b5f0be ]
The DYING/STARTING callbacks are not expected to fail. However, as reported
by Derek, buggy drivers such as tboot are still free to return errors
within those sections, which halts the hot(un)plug and leaves the CPU in an
unrecoverable state.
As there is no rollback possible, only log the failures and proceed with
the following steps.
This restores the hotplug behaviour prior to commit 453e41085183
("cpu/hotplug: Add cpuhp_invoke_callback_range()")
Fixes: 453e41085183 ("cpu/hotplug: Add cpuhp_invoke_callback_range()")
Reported-by: Derek Dolney <z23@posteo.net>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Derek Dolney <z23@posteo.net>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215867
Link: https://lore.kernel.org/r/20220927101259.1149636-1-vdonnefort@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/cpu.c | 56 +++++++++++++++++++++++++++++++++++++---------------
1 file changed, 40 insertions(+), 16 deletions(-)
diff --git a/kernel/cpu.c b/kernel/cpu.c
index e08d207011dd..393114c10c28 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -662,21 +662,51 @@ static bool cpuhp_next_state(bool bringup,
return true;
}
-static int cpuhp_invoke_callback_range(bool bringup,
- unsigned int cpu,
- struct cpuhp_cpu_state *st,
- enum cpuhp_state target)
+static int __cpuhp_invoke_callback_range(bool bringup,
+ unsigned int cpu,
+ struct cpuhp_cpu_state *st,
+ enum cpuhp_state target,
+ bool nofail)
{
enum cpuhp_state state;
- int err = 0;
+ int ret = 0;
while (cpuhp_next_state(bringup, &state, st, target)) {
+ int err;
+
err = cpuhp_invoke_callback(cpu, state, bringup, NULL, NULL);
- if (err)
+ if (!err)
+ continue;
+
+ if (nofail) {
+ pr_warn("CPU %u %s state %s (%d) failed (%d)\n",
+ cpu, bringup ? "UP" : "DOWN",
+ cpuhp_get_step(st->state)->name,
+ st->state, err);
+ ret = -1;
+ } else {
+ ret = err;
break;
+ }
}
- return err;
+ return ret;
+}
+
+static inline int cpuhp_invoke_callback_range(bool bringup,
+ unsigned int cpu,
+ struct cpuhp_cpu_state *st,
+ enum cpuhp_state target)
+{
+ return __cpuhp_invoke_callback_range(bringup, cpu, st, target, false);
+}
+
+static inline void cpuhp_invoke_callback_range_nofail(bool bringup,
+ unsigned int cpu,
+ struct cpuhp_cpu_state *st,
+ enum cpuhp_state target)
+{
+ __cpuhp_invoke_callback_range(bringup, cpu, st, target, true);
}
static inline bool can_rollback_cpu(struct cpuhp_cpu_state *st)
@@ -994,7 +1024,6 @@ static int take_cpu_down(void *_param)
struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
enum cpuhp_state target = max((int)st->target, CPUHP_AP_OFFLINE);
int err, cpu = smp_processor_id();
- int ret;
/* Ensure this CPU doesn't handle any more interrupts. */
err = __cpu_disable();
@@ -1007,13 +1036,10 @@ static int take_cpu_down(void *_param)
*/
WARN_ON(st->state != (CPUHP_TEARDOWN_CPU - 1));
- /* Invoke the former CPU_DYING callbacks */
- ret = cpuhp_invoke_callback_range(false, cpu, st, target);
-
/*
- * DYING must not fail!
+ * Invoke the former CPU_DYING callbacks. DYING must not fail!
*/
- WARN_ON_ONCE(ret);
+ cpuhp_invoke_callback_range_nofail(false, cpu, st, target);
/* Give up timekeeping duties */
tick_handover_do_timer();
@@ -1285,16 +1311,14 @@ void notify_cpu_starting(unsigned int cpu)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
enum cpuhp_state target = min((int)st->target, CPUHP_AP_ONLINE);
- int ret;
rcu_cpu_starting(cpu); /* Enables RCU usage on this CPU. */
cpumask_set_cpu(cpu, &cpus_booted_once_mask);
- ret = cpuhp_invoke_callback_range(true, cpu, st, target);
/*
* STARTING must not fail!
*/
- WARN_ON_ONCE(ret);
+ cpuhp_invoke_callback_range_nofail(true, cpu, st, target);
}
/*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 120/731] clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (118 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 119/731] cpu/hotplug: Do not bail-out in DYING/STARTING sections Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 121/731] ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() Greg Kroah-Hartman
` (621 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Tony Lindgren,
Daniel Lezcano, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 180d35a7c05d520314a590c99ad8643d0213f28b ]
If clk_get_rate() fails which is called after clk_prepare_enable(),
clk_disable_unprepare() need be called in error path to disable the
clock in dmtimer_systimer_init_clock().
Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221029114427.946520-1-yangyingliang@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clocksource/timer-ti-dm-systimer.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index 2737407ff069..632523c1232f 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -345,8 +345,10 @@ static int __init dmtimer_systimer_init_clock(struct dmtimer_systimer *t,
return error;
r = clk_get_rate(clock);
- if (!r)
+ if (!r) {
+ clk_disable_unprepare(clock);
return -ENODEV;
+ }
if (is_ick)
t->ick = clock;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 121/731] ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (119 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 120/731] clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 122/731] uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix Greg Kroah-Hartman
` (620 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Li Zetao, Rafael J. Wysocki, Sasha Levin
From: Li Zetao <lizetao1@huawei.com>
[ Upstream commit 470188b09e92d83c5a997f25f0e8fb8cd2bc3469 ]
There is an use-after-free reported by KASAN:
BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82
Read of size 1 at addr ffff888112afc460 by task modprobe/2111
CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
Call Trace:
<TASK>
kasan_report+0xae/0xe0
acpi_ut_remove_reference+0x3b/0x82
acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5
acpi_ds_store_object_to_local+0x15d/0x3a0
acpi_ex_store+0x78d/0x7fd
acpi_ex_opcode_1A_1T_1R+0xbe4/0xf9b
acpi_ps_parse_aml+0x217/0x8d5
...
</TASK>
The root cause of the problem is that the acpi_operand_object
is freed when acpi_ut_walk_package_tree() fails in
acpi_ut_copy_ipackage_to_ipackage(), lead to repeated release in
acpi_ut_copy_iobject_to_iobject(). The problem was introduced
by "8aa5e56eeb61" commit, this commit is to fix memory leak in
acpi_ut_copy_iobject_to_iobject(), repeatedly adding remove
operation, lead to "acpi_operand_object" used after free.
Fix it by removing acpi_ut_remove_reference() in
acpi_ut_copy_ipackage_to_ipackage(). acpi_ut_copy_ipackage_to_ipackage()
is called to copy an internal package object into another internal
package object, when it fails, the memory of acpi_operand_object
should be freed by the caller.
Fixes: 8aa5e56eeb61 ("ACPICA: Utilities: Fix memory leak in acpi_ut_copy_iobject_to_iobject")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/acpica/utcopy.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/drivers/acpi/acpica/utcopy.c b/drivers/acpi/acpica/utcopy.c
index d9877153f400..fdd503bb69c4 100644
--- a/drivers/acpi/acpica/utcopy.c
+++ b/drivers/acpi/acpica/utcopy.c
@@ -916,13 +916,6 @@ acpi_ut_copy_ipackage_to_ipackage(union acpi_operand_object *source_obj,
status = acpi_ut_walk_package_tree(source_obj, dest_obj,
acpi_ut_copy_ielement_to_ielement,
walk_state);
- if (ACPI_FAILURE(status)) {
-
- /* On failure, delete the destination package object */
-
- acpi_ut_remove_reference(dest_obj);
- }
-
return_ACPI_STATUS(status);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 122/731] uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (120 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 121/731] ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 123/731] x86/xen: Fix memory leak in xen_smp_intr_init{_pv}() Greg Kroah-Hartman
` (619 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Seiji Nishikawa, Denys Vlasenko,
Oleg Nesterov, Thomas Gleixner, Masami Hiramatsu (Google),
Sasha Levin
From: Oleg Nesterov <oleg@redhat.com>
[ Upstream commit cefa72129e45313655d53a065b8055aaeb01a0c9 ]
Intel ICC -hotpatch inserts 2-byte "0x66 0x90" NOP at the start of each
function to reserve extra space for hot-patching, and currently it is not
possible to probe these functions because branch_setup_xol_ops() wrongly
rejects NOP with REP prefix as it treats them like word-sized branch
instructions.
Fixes: 250bbd12c2fe ("uprobes/x86: Refuse to attach uprobe to "word-sized" branch insns")
Reported-by: Seiji Nishikawa <snishika@redhat.com>
Suggested-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20221204173933.GA31544@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/uprobes.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index b63cf8f7745e..6c07f6daaa22 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -722,8 +722,9 @@ static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
switch (opc1) {
case 0xeb: /* jmp 8 */
case 0xe9: /* jmp 32 */
- case 0x90: /* prefix* + nop; same as jmp with .offs = 0 */
break;
+ case 0x90: /* prefix* + nop; same as jmp with .offs = 0 */
+ goto setup;
case 0xe8: /* call relative */
branch_clear_offset(auprobe, insn);
@@ -753,6 +754,7 @@ static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
return -ENOTSUPP;
}
+setup:
auprobe->branch.opc1 = opc1;
auprobe->branch.ilen = insn->length;
auprobe->branch.offs = insn->immediate.value;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 123/731] x86/xen: Fix memory leak in xen_smp_intr_init{_pv}()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (121 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 122/731] uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 124/731] x86/xen: Fix memory leak in xen_init_lock_cpu() Greg Kroah-Hartman
` (618 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiu Jianfeng, Juergen Gross, Sasha Levin
From: Xiu Jianfeng <xiujianfeng@huawei.com>
[ Upstream commit 69143f60868b3939ddc89289b29db593b647295e ]
These local variables @{resched|pmu|callfunc...}_name saves the new
string allocated by kasprintf(), and when bind_{v}ipi_to_irqhandler()
fails, it goes to the @fail tag, and calls xen_smp_intr_free{_pv}() to
free resource, however the new string is not saved, which cause a memory
leak issue. fix it.
Fixes: 9702785a747a ("i386: move xen")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221123155858.11382-2-xiujianfeng@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/xen/smp.c | 24 ++++++++++++------------
arch/x86/xen/smp_pv.c | 12 ++++++------
2 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index c1b2f764b29a..cdec892b28e2 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -32,30 +32,30 @@ static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id)
void xen_smp_intr_free(unsigned int cpu)
{
+ kfree(per_cpu(xen_resched_irq, cpu).name);
+ per_cpu(xen_resched_irq, cpu).name = NULL;
if (per_cpu(xen_resched_irq, cpu).irq >= 0) {
unbind_from_irqhandler(per_cpu(xen_resched_irq, cpu).irq, NULL);
per_cpu(xen_resched_irq, cpu).irq = -1;
- kfree(per_cpu(xen_resched_irq, cpu).name);
- per_cpu(xen_resched_irq, cpu).name = NULL;
}
+ kfree(per_cpu(xen_callfunc_irq, cpu).name);
+ per_cpu(xen_callfunc_irq, cpu).name = NULL;
if (per_cpu(xen_callfunc_irq, cpu).irq >= 0) {
unbind_from_irqhandler(per_cpu(xen_callfunc_irq, cpu).irq, NULL);
per_cpu(xen_callfunc_irq, cpu).irq = -1;
- kfree(per_cpu(xen_callfunc_irq, cpu).name);
- per_cpu(xen_callfunc_irq, cpu).name = NULL;
}
+ kfree(per_cpu(xen_debug_irq, cpu).name);
+ per_cpu(xen_debug_irq, cpu).name = NULL;
if (per_cpu(xen_debug_irq, cpu).irq >= 0) {
unbind_from_irqhandler(per_cpu(xen_debug_irq, cpu).irq, NULL);
per_cpu(xen_debug_irq, cpu).irq = -1;
- kfree(per_cpu(xen_debug_irq, cpu).name);
- per_cpu(xen_debug_irq, cpu).name = NULL;
}
+ kfree(per_cpu(xen_callfuncsingle_irq, cpu).name);
+ per_cpu(xen_callfuncsingle_irq, cpu).name = NULL;
if (per_cpu(xen_callfuncsingle_irq, cpu).irq >= 0) {
unbind_from_irqhandler(per_cpu(xen_callfuncsingle_irq, cpu).irq,
NULL);
per_cpu(xen_callfuncsingle_irq, cpu).irq = -1;
- kfree(per_cpu(xen_callfuncsingle_irq, cpu).name);
- per_cpu(xen_callfuncsingle_irq, cpu).name = NULL;
}
}
@@ -65,6 +65,7 @@ int xen_smp_intr_init(unsigned int cpu)
char *resched_name, *callfunc_name, *debug_name;
resched_name = kasprintf(GFP_KERNEL, "resched%d", cpu);
+ per_cpu(xen_resched_irq, cpu).name = resched_name;
rc = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR,
cpu,
xen_reschedule_interrupt,
@@ -74,9 +75,9 @@ int xen_smp_intr_init(unsigned int cpu)
if (rc < 0)
goto fail;
per_cpu(xen_resched_irq, cpu).irq = rc;
- per_cpu(xen_resched_irq, cpu).name = resched_name;
callfunc_name = kasprintf(GFP_KERNEL, "callfunc%d", cpu);
+ per_cpu(xen_callfunc_irq, cpu).name = callfunc_name;
rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_VECTOR,
cpu,
xen_call_function_interrupt,
@@ -86,10 +87,10 @@ int xen_smp_intr_init(unsigned int cpu)
if (rc < 0)
goto fail;
per_cpu(xen_callfunc_irq, cpu).irq = rc;
- per_cpu(xen_callfunc_irq, cpu).name = callfunc_name;
if (!xen_fifo_events) {
debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu);
+ per_cpu(xen_debug_irq, cpu).name = debug_name;
rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu,
xen_debug_interrupt,
IRQF_PERCPU | IRQF_NOBALANCING,
@@ -97,10 +98,10 @@ int xen_smp_intr_init(unsigned int cpu)
if (rc < 0)
goto fail;
per_cpu(xen_debug_irq, cpu).irq = rc;
- per_cpu(xen_debug_irq, cpu).name = debug_name;
}
callfunc_name = kasprintf(GFP_KERNEL, "callfuncsingle%d", cpu);
+ per_cpu(xen_callfuncsingle_irq, cpu).name = callfunc_name;
rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_SINGLE_VECTOR,
cpu,
xen_call_function_single_interrupt,
@@ -110,7 +111,6 @@ int xen_smp_intr_init(unsigned int cpu)
if (rc < 0)
goto fail;
per_cpu(xen_callfuncsingle_irq, cpu).irq = rc;
- per_cpu(xen_callfuncsingle_irq, cpu).name = callfunc_name;
return 0;
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index cd5539fc5eb4..b47b5111397a 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -97,18 +97,18 @@ asmlinkage __visible void cpu_bringup_and_idle(void)
void xen_smp_intr_free_pv(unsigned int cpu)
{
+ kfree(per_cpu(xen_irq_work, cpu).name);
+ per_cpu(xen_irq_work, cpu).name = NULL;
if (per_cpu(xen_irq_work, cpu).irq >= 0) {
unbind_from_irqhandler(per_cpu(xen_irq_work, cpu).irq, NULL);
per_cpu(xen_irq_work, cpu).irq = -1;
- kfree(per_cpu(xen_irq_work, cpu).name);
- per_cpu(xen_irq_work, cpu).name = NULL;
}
+ kfree(per_cpu(xen_pmu_irq, cpu).name);
+ per_cpu(xen_pmu_irq, cpu).name = NULL;
if (per_cpu(xen_pmu_irq, cpu).irq >= 0) {
unbind_from_irqhandler(per_cpu(xen_pmu_irq, cpu).irq, NULL);
per_cpu(xen_pmu_irq, cpu).irq = -1;
- kfree(per_cpu(xen_pmu_irq, cpu).name);
- per_cpu(xen_pmu_irq, cpu).name = NULL;
}
}
@@ -118,6 +118,7 @@ int xen_smp_intr_init_pv(unsigned int cpu)
char *callfunc_name, *pmu_name;
callfunc_name = kasprintf(GFP_KERNEL, "irqwork%d", cpu);
+ per_cpu(xen_irq_work, cpu).name = callfunc_name;
rc = bind_ipi_to_irqhandler(XEN_IRQ_WORK_VECTOR,
cpu,
xen_irq_work_interrupt,
@@ -127,10 +128,10 @@ int xen_smp_intr_init_pv(unsigned int cpu)
if (rc < 0)
goto fail;
per_cpu(xen_irq_work, cpu).irq = rc;
- per_cpu(xen_irq_work, cpu).name = callfunc_name;
if (is_xen_pmu) {
pmu_name = kasprintf(GFP_KERNEL, "pmu%d", cpu);
+ per_cpu(xen_pmu_irq, cpu).name = pmu_name;
rc = bind_virq_to_irqhandler(VIRQ_XENPMU, cpu,
xen_pmu_irq_handler,
IRQF_PERCPU|IRQF_NOBALANCING,
@@ -138,7 +139,6 @@ int xen_smp_intr_init_pv(unsigned int cpu)
if (rc < 0)
goto fail;
per_cpu(xen_pmu_irq, cpu).irq = rc;
- per_cpu(xen_pmu_irq, cpu).name = pmu_name;
}
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 124/731] x86/xen: Fix memory leak in xen_init_lock_cpu()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (122 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 123/731] x86/xen: Fix memory leak in xen_smp_intr_init{_pv}() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 125/731] xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource() Greg Kroah-Hartman
` (617 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiu Jianfeng, Juergen Gross, Sasha Levin
From: Xiu Jianfeng <xiujianfeng@huawei.com>
[ Upstream commit ca84ce153d887b1dc8b118029976cc9faf2a9b40 ]
In xen_init_lock_cpu(), the @name has allocated new string by kasprintf(),
if bind_ipi_to_irqhandler() fails, it should be freed, otherwise may lead
to a memory leak issue, fix it.
Fixes: 2d9e1e2f58b5 ("xen: implement Xen-specific spinlocks")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221123155858.11382-3-xiujianfeng@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/xen/spinlock.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 043c73dfd2c9..5c6fc16e4b92 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -75,6 +75,7 @@ void xen_init_lock_cpu(int cpu)
cpu, per_cpu(lock_kicker_irq, cpu));
name = kasprintf(GFP_KERNEL, "spinlock%d", cpu);
+ per_cpu(irq_name, cpu) = name;
irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR,
cpu,
dummy_handler,
@@ -85,7 +86,6 @@ void xen_init_lock_cpu(int cpu)
if (irq >= 0) {
disable_irq(irq); /* make sure it's never delivered */
per_cpu(lock_kicker_irq, cpu) = irq;
- per_cpu(irq_name, cpu) = name;
}
printk("cpu %d spinlock event irq %d\n", cpu, irq);
@@ -98,6 +98,8 @@ void xen_uninit_lock_cpu(int cpu)
if (!xen_pvspin)
return;
+ kfree(per_cpu(irq_name, cpu));
+ per_cpu(irq_name, cpu) = NULL;
/*
* When booting the kernel with 'mitigations=auto,nosmt', the secondary
* CPUs are not activated, and lock_kicker_irq is not initialized.
@@ -108,8 +110,6 @@ void xen_uninit_lock_cpu(int cpu)
unbind_from_irqhandler(irq, NULL);
per_cpu(lock_kicker_irq, cpu) = -1;
- kfree(per_cpu(irq_name, cpu));
- per_cpu(irq_name, cpu) = NULL;
}
PV_CALLEE_SAVE_REGS_THUNK(xen_vcpu_stolen);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 125/731] xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (123 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 124/731] x86/xen: Fix memory leak in xen_init_lock_cpu() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 126/731] PM: runtime: Do not call __rpm_callback() from rpm_idle() Greg Kroah-Hartman
` (616 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Harshit Mogalapalli, Juergen Gross,
Sasha Levin
From: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ Upstream commit 8b997b2bb2c53b76a6db6c195930e9ab8e4b0c79 ]
As 'kdata.num' is user-controlled data, if user tries to allocate
memory larger than(>=) MAX_ORDER, then kcalloc() will fail, it
creates a stack trace and messes up dmesg with a warning.
Call trace:
-> privcmd_ioctl
--> privcmd_ioctl_mmap_resource
Add __GFP_NOWARN in order to avoid too large allocation warning.
This is detected by static analysis using smatch.
Fixes: 3ad0876554ca ("xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221126050745.778967-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/xen/privcmd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c
index e88e8f6f0a33..719c5d1dda27 100644
--- a/drivers/xen/privcmd.c
+++ b/drivers/xen/privcmd.c
@@ -760,7 +760,7 @@ static long privcmd_ioctl_mmap_resource(struct file *file,
goto out;
}
- pfns = kcalloc(kdata.num, sizeof(*pfns), GFP_KERNEL);
+ pfns = kcalloc(kdata.num, sizeof(*pfns), GFP_KERNEL | __GFP_NOWARN);
if (!pfns) {
rc = -ENOMEM;
goto out;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 126/731] PM: runtime: Do not call __rpm_callback() from rpm_idle()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (124 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 125/731] xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 127/731] platform/chrome: cros_ec_typec: Cleanup switch handle return paths Greg Kroah-Hartman
` (615 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rafael J. Wysocki, Adrian Hunter,
Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit bc80c2e438dcbfcf748452ec0f7ad5b79ff3ad88 ]
Calling __rpm_callback() from rpm_idle() after adding device links
support to the former is a clear mistake.
Not only it causes rpm_idle() to carry out unnecessary actions, but it
is also against the assumption regarding the stability of PM-runtime
status across __rpm_callback() invocations, because rpm_suspend() and
rpm_resume() may run in parallel with __rpm_callback() when it is called
by rpm_idle() and the device's PM-runtime status can be updated by any
of them.
Fixes: 21d5c57b3726 ("PM / runtime: Use device links")
Link: https://lore.kernel.org/linux-pm/36aed941-a73e-d937-2721-4f0decd61ce0@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/power/runtime.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 3179c9265471..c1142a7a4fe6 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -484,7 +484,17 @@ static int rpm_idle(struct device *dev, int rpmflags)
dev->power.idle_notification = true;
- retval = __rpm_callback(callback, dev);
+ if (dev->power.irq_safe)
+ spin_unlock(&dev->power.lock);
+ else
+ spin_unlock_irq(&dev->power.lock);
+
+ retval = callback(dev);
+
+ if (dev->power.irq_safe)
+ spin_lock(&dev->power.lock);
+ else
+ spin_lock_irq(&dev->power.lock);
dev->power.idle_notification = false;
wake_up_all(&dev->power.wait_queue);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 127/731] platform/chrome: cros_ec_typec: Cleanup switch handle return paths
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (125 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 126/731] PM: runtime: Do not call __rpm_callback() from rpm_idle() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 128/731] platform/chrome: cros_ec_typec: zero out stale pointers Greg Kroah-Hartman
` (614 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Prashant Malani, Sasha Levin
From: Prashant Malani <pmalani@chromium.org>
[ Upstream commit 66fe238a9bcc158f75ddecf976d1ce7efe20f713 ]
Some of the return paths for the cros_typec_get_switch_handles()
aren't necessary. Clean up the return paths to only undo the handle
get's which succeeded.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20220711072333.2064341-9-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 9a8aadcf0b45 ("platform/chrome: cros_ec_typec: zero out stale pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/chrome/cros_ec_typec.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
index aadb8d237aef..d63be2b3d10e 100644
--- a/drivers/platform/chrome/cros_ec_typec.c
+++ b/drivers/platform/chrome/cros_ec_typec.c
@@ -156,12 +156,10 @@ static int cros_typec_get_switch_handles(struct cros_typec_port *port,
return 0;
role_sw_err:
- usb_role_switch_put(port->role_sw);
-ori_sw_err:
typec_switch_put(port->ori_sw);
-mux_err:
+ori_sw_err:
typec_mux_put(port->mux);
-
+mux_err:
return -ENODEV;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 128/731] platform/chrome: cros_ec_typec: zero out stale pointers
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (126 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 127/731] platform/chrome: cros_ec_typec: Cleanup switch handle return paths Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 129/731] platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]() Greg Kroah-Hartman
` (613 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Victor Ding, Prashant Malani,
Tzung-Bi Shih, Sasha Levin
From: Victor Ding <victording@chromium.org>
[ Upstream commit 9a8aadcf0b459c1257b9477fd6402e1d5952ae07 ]
`cros_typec_get_switch_handles` allocates four pointers when obtaining
type-c switch handles. These pointers are all freed if failing to obtain
any of them; therefore, pointers in `port` become stale. The stale
pointers eventually cause use-after-free or double free in later code
paths. Zeroing out all pointer fields after freeing to eliminate these
stale pointers.
Fixes: f28adb41dab4 ("platform/chrome: cros_ec_typec: Register Type C switches")
Fixes: 1a8912caba02 ("platform/chrome: cros_ec_typec: Get retimer handle")
Signed-off-by: Victor Ding <victording@chromium.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221207093924.v2.1.I1864b6a7ee98824118b93677868d22d3750f439b@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/chrome/cros_ec_typec.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
index d63be2b3d10e..b94abb8f7706 100644
--- a/drivers/platform/chrome/cros_ec_typec.c
+++ b/drivers/platform/chrome/cros_ec_typec.c
@@ -157,8 +157,10 @@ static int cros_typec_get_switch_handles(struct cros_typec_port *port,
role_sw_err:
typec_switch_put(port->ori_sw);
+ port->ori_sw = NULL;
ori_sw_err:
typec_mux_put(port->mux);
+ port->mux = NULL;
mux_err:
return -ENODEV;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 129/731] platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (127 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 128/731] platform/chrome: cros_ec_typec: zero out stale pointers Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 130/731] platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register() Greg Kroah-Hartman
` (612 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yu Liao, Hans de Goede, Sasha Levin
From: Yu Liao <liaoyu15@huawei.com>
[ Upstream commit 727cc0147f5066e359aca65cc6cc5e6d64cc15d8 ]
The ACPI buffer memory (out.pointer) returned by wmi_evaluate_method()
is not freed after the call, so it leads to memory leak.
The method results in ACPI buffer is not used, so just pass NULL to
wmi_evaluate_method() which fixes the memory leak.
Fixes: 99b38b4acc0d ("platform/x86: add MXM WMI driver.")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20221129011101.2042315-1-liaoyu15@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/x86/mxm-wmi.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/platform/x86/mxm-wmi.c b/drivers/platform/x86/mxm-wmi.c
index 9a19fbd2f734..9a457956025a 100644
--- a/drivers/platform/x86/mxm-wmi.c
+++ b/drivers/platform/x86/mxm-wmi.c
@@ -35,13 +35,11 @@ int mxm_wmi_call_mxds(int adapter)
.xarg = 1,
};
struct acpi_buffer input = { (acpi_size)sizeof(args), &args };
- struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
acpi_status status;
printk("calling mux switch %d\n", adapter);
- status = wmi_evaluate_method(MXM_WMMX_GUID, 0x0, adapter, &input,
- &output);
+ status = wmi_evaluate_method(MXM_WMMX_GUID, 0x0, adapter, &input, NULL);
if (ACPI_FAILURE(status))
return status;
@@ -60,13 +58,11 @@ int mxm_wmi_call_mxmx(int adapter)
.xarg = 1,
};
struct acpi_buffer input = { (acpi_size)sizeof(args), &args };
- struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
acpi_status status;
printk("calling mux switch %d\n", adapter);
- status = wmi_evaluate_method(MXM_WMMX_GUID, 0x0, adapter, &input,
- &output);
+ status = wmi_evaluate_method(MXM_WMMX_GUID, 0x0, adapter, &input, NULL);
if (ACPI_FAILURE(status))
return status;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 130/731] platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (128 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 129/731] platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 131/731] MIPS: BCM63xx: Add check for NULL for clk in clk_enable Greg Kroah-Hartman
` (611 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Hans de Goede, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 0b3d0cb7c0bed2fd6454f77ed75e7a662c6efd12 ]
In some error paths before device_register(), the names allocated
by dev_set_name() are not freed. Move dev_set_name() front to
device_register(), so the name can be freed while calling
put_device().
Fixes: 54b34aa0a729 ("platform/x86: intel_scu_ipc: Split out SCU IPC functionality from the SCU driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221208151916.2404977-1-yangyingliang@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/x86/intel_scu_ipc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 7cc9089d1e14..e7a3e3402817 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -583,7 +583,6 @@ __intel_scu_ipc_register(struct device *parent,
scu->dev.parent = parent;
scu->dev.class = &intel_scu_ipc_class;
scu->dev.release = intel_scu_ipc_release;
- dev_set_name(&scu->dev, "intel_scu_ipc");
if (!request_mem_region(scu_data->mem.start, resource_size(&scu_data->mem),
"intel_scu_ipc")) {
@@ -612,6 +611,7 @@ __intel_scu_ipc_register(struct device *parent,
* After this point intel_scu_ipc_release() takes care of
* releasing the SCU IPC resources once refcount drops to zero.
*/
+ dev_set_name(&scu->dev, "intel_scu_ipc");
err = device_register(&scu->dev);
if (err) {
put_device(&scu->dev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 131/731] MIPS: BCM63xx: Add check for NULL for clk in clk_enable
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (129 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 130/731] platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register() Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 132/731] MIPS: OCTEON: warn only once if deprecated link status is being used Greg Kroah-Hartman
` (610 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Anastasia Belova,
Philippe Mathieu-Daudé,
Florian Fainelli, Thomas Bogendoerfer, Sasha Levin
From: Anastasia Belova <abelova@astralinux.ru>
[ Upstream commit ee9ef11bd2a59c2fefaa0959e5efcdf040d7c654 ]
Check clk for NULL before calling clk_enable_unlocked where clk
is dereferenced. There is such check in other implementations
of clk_enable.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/bcm63xx/clk.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 6e6756e8fa0a..86a6e2590866 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -361,6 +361,8 @@ static struct clk clk_periph = {
*/
int clk_enable(struct clk *clk)
{
+ if (!clk)
+ return 0;
mutex_lock(&clocks_mutex);
clk_enable_unlocked(clk);
mutex_unlock(&clocks_mutex);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 132/731] MIPS: OCTEON: warn only once if deprecated link status is being used
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (130 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 131/731] MIPS: BCM63xx: Add check for NULL for clk in clk_enable Greg Kroah-Hartman
@ 2022-12-28 14:33 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 133/731] lockd: set other missing fields when unlocking files Greg Kroah-Hartman
` (609 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:33 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ladislav Michl,
Philippe Mathieu-Daudé,
Thomas Bogendoerfer, Sasha Levin
From: Ladislav Michl <ladis@linux-mips.org>
[ Upstream commit 4c587a982603d7e7e751b4925809a1512099a690 ]
Avoid flooding kernel log with warnings.
Fixes: 2c0756d306c2 ("MIPS: OCTEON: warn if deprecated link status is being used")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/cavium-octeon/executive/cvmx-helper-board.c | 2 +-
arch/mips/cavium-octeon/executive/cvmx-helper.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index 1daa0c6b6f4e..572a053e30ed 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -211,7 +211,7 @@ union cvmx_helper_link_info __cvmx_helper_board_link_get(int ipd_port)
{
union cvmx_helper_link_info result;
- WARN(!octeon_is_simulation(),
+ WARN_ONCE(!octeon_is_simulation(),
"Using deprecated link status - please update your DT");
/* Unless we fix it later, all links are defaulted to down */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index 6044ff471002..a18ad2daf005 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -1100,7 +1100,7 @@ union cvmx_helper_link_info cvmx_helper_link_get(int ipd_port)
if (index == 0)
result = __cvmx_helper_rgmii_link_get(ipd_port);
else {
- WARN(1, "Using deprecated link status - please update your DT");
+ WARN_ONCE(1, "Using deprecated link status - please update your DT");
result.s.full_duplex = 1;
result.s.link_up = 1;
result.s.speed = 1000;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 133/731] lockd: set other missing fields when unlocking files
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (131 preceding siblings ...)
2022-12-28 14:33 ` [PATCH 5.15 132/731] MIPS: OCTEON: warn only once if deprecated link status is being used Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 134/731] fs: sysv: Fix sysv_nblocks() returns wrong value Greg Kroah-Hartman
` (608 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Trond Myklebust, Jeff Layton,
Chuck Lever, Sasha Levin
From: Trond Myklebust <trond.myklebust@hammerspace.com>
[ Upstream commit 18ebd35b61b4693a0ddc270b6d4f18def232e770 ]
vfs_lock_file() expects the struct file_lock to be fully initialised by
the caller. Re-exported NFSv3 has been seen to Oops if the fl_file field
is NULL.
Fixes: aec158242b87 ("lockd: set fl_owner when unlocking files")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216582
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/lockd/svcsubs.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/fs/lockd/svcsubs.c b/fs/lockd/svcsubs.c
index e1c4617de771..3515f17eaf3f 100644
--- a/fs/lockd/svcsubs.c
+++ b/fs/lockd/svcsubs.c
@@ -176,7 +176,7 @@ nlm_delete_file(struct nlm_file *file)
}
}
-static int nlm_unlock_files(struct nlm_file *file, fl_owner_t owner)
+static int nlm_unlock_files(struct nlm_file *file, const struct file_lock *fl)
{
struct file_lock lock;
@@ -184,12 +184,15 @@ static int nlm_unlock_files(struct nlm_file *file, fl_owner_t owner)
lock.fl_type = F_UNLCK;
lock.fl_start = 0;
lock.fl_end = OFFSET_MAX;
- lock.fl_owner = owner;
- if (file->f_file[O_RDONLY] &&
- vfs_lock_file(file->f_file[O_RDONLY], F_SETLK, &lock, NULL))
+ lock.fl_owner = fl->fl_owner;
+ lock.fl_pid = fl->fl_pid;
+ lock.fl_flags = FL_POSIX;
+
+ lock.fl_file = file->f_file[O_RDONLY];
+ if (lock.fl_file && vfs_lock_file(lock.fl_file, F_SETLK, &lock, NULL))
goto out_err;
- if (file->f_file[O_WRONLY] &&
- vfs_lock_file(file->f_file[O_WRONLY], F_SETLK, &lock, NULL))
+ lock.fl_file = file->f_file[O_WRONLY];
+ if (lock.fl_file && vfs_lock_file(lock.fl_file, F_SETLK, &lock, NULL))
goto out_err;
return 0;
out_err:
@@ -226,7 +229,7 @@ nlm_traverse_locks(struct nlm_host *host, struct nlm_file *file,
if (match(lockhost, host)) {
spin_unlock(&flctx->flc_lock);
- if (nlm_unlock_files(file, fl->fl_owner))
+ if (nlm_unlock_files(file, fl))
return 1;
goto again;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 134/731] fs: sysv: Fix sysv_nblocks() returns wrong value
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (132 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 133/731] lockd: set other missing fields when unlocking files Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 135/731] rapidio: fix possible UAF when kfifo_alloc() fails Greg Kroah-Hartman
` (607 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Chen Zhongjin, Al Viro, Sasha Levin
From: Chen Zhongjin <chenzhongjin@huawei.com>
[ Upstream commit e0c49bd2b4d3cd1751491eb2d940bce968ac65e9 ]
sysv_nblocks() returns 'blocks' rather than 'res', which only counting
the number of triple-indirect blocks and causing sysv_getattr() gets a
wrong result.
[AV: this is actually a sysv counterpart of minixfs fix -
0fcd426de9d0 "[PATCH] minix block usage counting fix" in
historical tree; mea culpa, should've thought to check
fs/sysv back then...]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/sysv/itree.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/sysv/itree.c b/fs/sysv/itree.c
index 749385015a8d..5a59d56a2038 100644
--- a/fs/sysv/itree.c
+++ b/fs/sysv/itree.c
@@ -438,7 +438,7 @@ static unsigned sysv_nblocks(struct super_block *s, loff_t size)
res += blocks;
direct = 1;
}
- return blocks;
+ return res;
}
int sysv_getattr(struct user_namespace *mnt_userns, const struct path *path,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 135/731] rapidio: fix possible UAF when kfifo_alloc() fails
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (133 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 134/731] fs: sysv: Fix sysv_nblocks() returns wrong value Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 136/731] eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD Greg Kroah-Hartman
` (606 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wang Weiyang, Alexandre Bounine,
Dan Carpenter, Jakob Koschel, John Hubbard, Matt Porter,
Yang Yingliang, Andrew Morton, Sasha Levin
From: Wang Weiyang <wangweiyang2@huawei.com>
[ Upstream commit 02d7d89f816951e0862147d751b1150d67aaebdd ]
If kfifo_alloc() fails in mport_cdev_open(), goto err_fifo and just free
priv. But priv is still in the chdev->file_list, then list traversal
may cause UAF. This fixes the following smatch warning:
drivers/rapidio/devices/rio_mport_cdev.c:1930 mport_cdev_open() warn: '&priv->list' not removed from list
Link: https://lkml.kernel.org/r/20221123095147.52408-1-wangweiyang2@huawei.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Wang Weiyang <wangweiyang2@huawei.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rapidio/devices/rio_mport_cdev.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c
index 48cd9b7f3b89..b8c09eaa23b5 100644
--- a/drivers/rapidio/devices/rio_mport_cdev.c
+++ b/drivers/rapidio/devices/rio_mport_cdev.c
@@ -1903,10 +1903,6 @@ static int mport_cdev_open(struct inode *inode, struct file *filp)
priv->md = chdev;
- mutex_lock(&chdev->file_mutex);
- list_add_tail(&priv->list, &chdev->file_list);
- mutex_unlock(&chdev->file_mutex);
-
INIT_LIST_HEAD(&priv->db_filters);
INIT_LIST_HEAD(&priv->pw_filters);
spin_lock_init(&priv->fifo_lock);
@@ -1925,6 +1921,9 @@ static int mport_cdev_open(struct inode *inode, struct file *filp)
spin_lock_init(&priv->req_lock);
mutex_init(&priv->dma_lock);
#endif
+ mutex_lock(&chdev->file_mutex);
+ list_add_tail(&priv->list, &chdev->file_list);
+ mutex_unlock(&chdev->file_mutex);
filp->private_data = priv;
goto out;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 136/731] eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (134 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 135/731] rapidio: fix possible UAF when kfifo_alloc() fails Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 137/731] relay: fix type mismatch when allocating memory in relay_create_buf() Greg Kroah-Hartman
` (605 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Qilong, Dylan Yudaken,
Jens Axboe, Sha Zhengju, Andrew Morton, Sasha Levin
From: Zhang Qilong <zhangqilong3@huawei.com>
[ Upstream commit fd4e60bf0ef8eb9edcfa12dda39e8b6ee9060492 ]
Commit ee62c6b2dc93 ("eventfd: change int to __u64 in eventfd_signal()")
forgot to change int to __u64 in the CONFIG_EVENTFD=n stub function.
Link: https://lkml.kernel.org/r/20221124140154.104680-1-zhangqilong3@huawei.com
Fixes: ee62c6b2dc93 ("eventfd: change int to __u64 in eventfd_signal()")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sha Zhengju <handai.szj@taobao.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/eventfd.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h
index 30eb30d6909b..3cd202d3eefb 100644
--- a/include/linux/eventfd.h
+++ b/include/linux/eventfd.h
@@ -61,7 +61,7 @@ static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd)
return ERR_PTR(-ENOSYS);
}
-static inline int eventfd_signal(struct eventfd_ctx *ctx, int n)
+static inline int eventfd_signal(struct eventfd_ctx *ctx, __u64 n)
{
return -ENOSYS;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 137/731] relay: fix type mismatch when allocating memory in relay_create_buf()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (135 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 136/731] eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 138/731] hfs: Fix OOB Write in hfs_asc2mac Greg Kroah-Hartman
` (604 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ilia.Gavrilov, Colin Ian King,
Jens Axboe, wuchi, Andrew Morton, Sasha Levin
From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
[ Upstream commit 4d8586e04602fe42f0a782d2005956f8b6302678 ]
The 'padding' field of the 'rchan_buf' structure is an array of 'size_t'
elements, but the memory is allocated for an array of 'size_t *' elements.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lkml.kernel.org/r/20221129092002.3538384-1-Ilia.Gavrilov@infotecs.ru
Fixes: b86ff981a825 ("[PATCH] relay: migrate from relayfs to a generic relay API")
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: wuchi <wuchi.zero@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/relay.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/relay.c b/kernel/relay.c
index d1a67fbb819d..6825b8403877 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -151,13 +151,13 @@ static struct rchan_buf *relay_create_buf(struct rchan *chan)
{
struct rchan_buf *buf;
- if (chan->n_subbufs > KMALLOC_MAX_SIZE / sizeof(size_t *))
+ if (chan->n_subbufs > KMALLOC_MAX_SIZE / sizeof(size_t))
return NULL;
buf = kzalloc(sizeof(struct rchan_buf), GFP_KERNEL);
if (!buf)
return NULL;
- buf->padding = kmalloc_array(chan->n_subbufs, sizeof(size_t *),
+ buf->padding = kmalloc_array(chan->n_subbufs, sizeof(size_t),
GFP_KERNEL);
if (!buf->padding)
goto free_buf;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 138/731] hfs: Fix OOB Write in hfs_asc2mac
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (136 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 137/731] relay: fix type mismatch when allocating memory in relay_create_buf() Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 139/731] rapidio: devices: fix missing put_device in mport_cdev_open Greg Kroah-Hartman
` (603 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, ZhangPeng, Viacheslav Dubeyko,
syzbot+dc3b1cf9111ab5fe98e7, Andrew Morton, Sasha Levin
From: ZhangPeng <zhangpeng362@huawei.com>
[ Upstream commit c53ed55cb275344086e32a7080a6b19cb183650b ]
Syzbot reported a OOB Write bug:
loop0: detected capacity change from 0 to 64
==================================================================
BUG: KASAN: slab-out-of-bounds in hfs_asc2mac+0x467/0x9a0
fs/hfs/trans.c:133
Write of size 1 at addr ffff88801848314e by task syz-executor391/3632
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:284
print_report+0x107/0x1f0 mm/kasan/report.c:395
kasan_report+0xcd/0x100 mm/kasan/report.c:495
hfs_asc2mac+0x467/0x9a0 fs/hfs/trans.c:133
hfs_cat_build_key+0x92/0x170 fs/hfs/catalog.c:28
hfs_lookup+0x1ab/0x2c0 fs/hfs/dir.c:31
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3710
do_filp_open+0x264/0x4f0 fs/namei.c:3740
If in->len is much larger than HFS_NAMELEN(31) which is the maximum
length of an HFS filename, a OOB write could occur in hfs_asc2mac(). In
that case, when the dst reaches the boundary, the srclen is still
greater than 0, which causes a OOB write.
Fix this by adding a check on dstlen in while() before writing to dst
address.
Link: https://lkml.kernel.org/r/20221202030038.1391945-1-zhangpeng362@huawei.com
Fixes: 328b92278650 ("[PATCH] hfs: NLS support")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Reported-by: <syzbot+dc3b1cf9111ab5fe98e7@syzkaller.appspotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/hfs/trans.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/hfs/trans.c b/fs/hfs/trans.c
index 39f5e343bf4d..fdb0edb8a607 100644
--- a/fs/hfs/trans.c
+++ b/fs/hfs/trans.c
@@ -109,7 +109,7 @@ void hfs_asc2mac(struct super_block *sb, struct hfs_name *out, const struct qstr
if (nls_io) {
wchar_t ch;
- while (srclen > 0) {
+ while (srclen > 0 && dstlen > 0) {
size = nls_io->char2uni(src, srclen, &ch);
if (size < 0) {
ch = '?';
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 139/731] rapidio: devices: fix missing put_device in mport_cdev_open
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (137 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 138/731] hfs: Fix OOB Write in hfs_asc2mac Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 140/731] platform/mellanox: mlxbf-pmc: Fix event typo Greg Kroah-Hartman
` (602 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Cai Xinchen, Alexandre Bounine,
Dan Carpenter, Jakob Koschel, John Hubbard, Matt Porter,
Wang Weiyang, Yang Yingliang, Andrew Morton, Sasha Levin
From: Cai Xinchen <caixinchen1@huawei.com>
[ Upstream commit d5b6e6eba3af11cb2a2791fa36a2524990fcde1a ]
When kfifo_alloc fails, the refcount of chdev->dev is left incremental.
We should use put_device(&chdev->dev) to decrease the ref count of
chdev->dev to avoid refcount leak.
Link: https://lkml.kernel.org/r/20221203085721.13146-1-caixinchen1@huawei.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Wang Weiyang <wangweiyang2@huawei.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rapidio/devices/rio_mport_cdev.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c
index b8c09eaa23b5..5ac2dc1e2abd 100644
--- a/drivers/rapidio/devices/rio_mport_cdev.c
+++ b/drivers/rapidio/devices/rio_mport_cdev.c
@@ -1911,6 +1911,7 @@ static int mport_cdev_open(struct inode *inode, struct file *filp)
sizeof(struct rio_event) * MPORT_EVENT_DEPTH,
GFP_KERNEL);
if (ret < 0) {
+ put_device(&chdev->dev);
dev_err(&chdev->dev, DRV_NAME ": kfifo_alloc failed\n");
ret = -ENOMEM;
goto err_fifo;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 140/731] platform/mellanox: mlxbf-pmc: Fix event typo
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (138 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 139/731] rapidio: devices: fix missing put_device in mport_cdev_open Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 141/731] wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs() Greg Kroah-Hartman
` (601 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, James Hurley, David Thompson,
Shravan Kumar Ramani, Hans de Goede, Sasha Levin
From: James Hurley <jahurley@nvidia.com>
[ Upstream commit b0b698b80c56b0712f0d4346d51bf0363ba03068 ]
Had a duplicate event typo, so just fixed the 1 character typo.
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: James Hurley <jahurley@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Link: https://lore.kernel.org/r/aadacdbbd3186c55e74ea9456fe011b77938eb6c.1670535330.git.jahurley@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/mellanox/mlxbf-pmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/platform/mellanox/mlxbf-pmc.c b/drivers/platform/mellanox/mlxbf-pmc.c
index 65b4a819f1bd..c2c9b0d3244c 100644
--- a/drivers/platform/mellanox/mlxbf-pmc.c
+++ b/drivers/platform/mellanox/mlxbf-pmc.c
@@ -358,7 +358,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_hnfnet_events[] = {
{ 0x32, "DDN_DIAG_W_INGRESS" },
{ 0x33, "DDN_DIAG_C_INGRESS" },
{ 0x34, "DDN_DIAG_CORE_SENT" },
- { 0x35, "NDN_DIAG_S_OUT_OF_CRED" },
+ { 0x35, "NDN_DIAG_N_OUT_OF_CRED" },
{ 0x36, "NDN_DIAG_S_OUT_OF_CRED" },
{ 0x37, "NDN_DIAG_E_OUT_OF_CRED" },
{ 0x38, "NDN_DIAG_W_OUT_OF_CRED" },
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 141/731] wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (139 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 140/731] platform/mellanox: mlxbf-pmc: Fix event typo Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 142/731] wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb() Greg Kroah-Hartman
` (600 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Fedor Pchelkin, Alexey Khoroshilov,
Toke Høiland-Jørgensen, Kalle Valo, Sasha Levin
From: Fedor Pchelkin <pchelkin@ispras.ru>
[ Upstream commit c2a94de38c74e86f49124ac14f093d6a5c377a90 ]
Syzkaller reports a long-known leak of urbs in
ath9k_hif_usb_dealloc_tx_urbs().
The cause of the leak is that usb_get_urb() is called but usb_free_urb()
(or usb_put_urb()) is not called inside usb_kill_urb() as urb->dev or
urb->ep fields have not been initialized and usb_kill_urb() returns
immediately.
The patch removes trying to kill urbs located in hif_dev->tx.tx_buf
because hif_dev->tx.tx_buf is not supposed to contain urbs which are in
pending state (the pending urbs are stored in hif_dev->tx.tx_pending).
The tx.tx_lock is acquired so there should not be any changes in the list.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 03fb92a432ea ("ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220725151359.283704-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index f06eec99de68..e66518d86882 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -781,14 +781,10 @@ static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev)
spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
list_for_each_entry_safe(tx_buf, tx_buf_tmp,
&hif_dev->tx.tx_buf, list) {
- usb_get_urb(tx_buf->urb);
- spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
- usb_kill_urb(tx_buf->urb);
list_del(&tx_buf->list);
usb_free_urb(tx_buf->urb);
kfree(tx_buf->buf);
kfree(tx_buf);
- spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
}
spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 142/731] wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (140 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 141/731] wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs() Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 143/731] wifi: rtl8xxxu: Fix reading the vendor of combo chips Greg Kroah-Hartman
` (599 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Fedor Pchelkin, Alexey Khoroshilov,
Toke Høiland-Jørgensen, Kalle Valo, Sasha Levin
From: Fedor Pchelkin <pchelkin@ispras.ru>
[ Upstream commit dd95f2239fc846795fc926787c3ae0ca701c9840 ]
It is possible that skb is freed in ath9k_htc_rx_msg(), then
usb_submit_urb() fails and we try to free skb again. It causes
use-after-free bug. Moreover, if alloc_skb() fails, urb->context becomes
NULL but rx_buf is not freed and there can be a memory leak.
The patch removes unnecessary nskb and makes skb processing more clear: it
is supposed that ath9k_htc_rx_msg() either frees old skb or passes its
managing to another callback function.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 3deff76095c4 ("ath9k_htc: Increase URB count for REG_IN pipe")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221008114917.21404-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 28 +++++++++++++-----------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index e66518d86882..e5d5b0761881 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -709,14 +709,13 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
struct hif_device_usb *hif_dev = rx_buf->hif_dev;
struct sk_buff *skb = rx_buf->skb;
- struct sk_buff *nskb;
int ret;
if (!skb)
return;
if (!hif_dev)
- goto free;
+ goto free_skb;
switch (urb->status) {
case 0:
@@ -725,7 +724,7 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
case -ECONNRESET:
case -ENODEV:
case -ESHUTDOWN:
- goto free;
+ goto free_skb;
default:
skb_reset_tail_pointer(skb);
skb_trim(skb, 0);
@@ -736,25 +735,27 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
if (likely(urb->actual_length != 0)) {
skb_put(skb, urb->actual_length);
- /* Process the command first */
+ /*
+ * Process the command first.
+ * skb is either freed here or passed to be
+ * managed to another callback function.
+ */
ath9k_htc_rx_msg(hif_dev->htc_handle, skb,
skb->len, USB_REG_IN_PIPE);
-
- nskb = alloc_skb(MAX_REG_IN_BUF_SIZE, GFP_ATOMIC);
- if (!nskb) {
+ skb = alloc_skb(MAX_REG_IN_BUF_SIZE, GFP_ATOMIC);
+ if (!skb) {
dev_err(&hif_dev->udev->dev,
"ath9k_htc: REG_IN memory allocation failure\n");
- urb->context = NULL;
- return;
+ goto free_rx_buf;
}
- rx_buf->skb = nskb;
+ rx_buf->skb = skb;
usb_fill_int_urb(urb, hif_dev->udev,
usb_rcvintpipe(hif_dev->udev,
USB_REG_IN_PIPE),
- nskb->data, MAX_REG_IN_BUF_SIZE,
+ skb->data, MAX_REG_IN_BUF_SIZE,
ath9k_hif_usb_reg_in_cb, rx_buf, 1);
}
@@ -763,12 +764,13 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret) {
usb_unanchor_urb(urb);
- goto free;
+ goto free_skb;
}
return;
-free:
+free_skb:
kfree_skb(skb);
+free_rx_buf:
kfree(rx_buf);
urb->context = NULL;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 143/731] wifi: rtl8xxxu: Fix reading the vendor of combo chips
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (141 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 142/731] wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb() Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 144/731] drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge Greg Kroah-Hartman
` (598 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bitterblue Smith, Kalle Valo, Sasha Levin
From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
[ Upstream commit 6f103aeb5e985ac08f3a4a049a2c17294f40cff9 ]
The wifi + bluetooth combo chips (RTL8723AU and RTL8723BU) read the
chip vendor from the wrong register because the val32 variable gets
overwritten. Add one more variable to avoid this.
This had no real effect on RTL8723BU. It may have had an effect on
RTL8723AU.
Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/24af8024-2f07-552b-93d8-38823d8e3cb0@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index e74c885a04e5..2a4ecbb0fce6 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -1607,18 +1607,18 @@ static void rtl8xxxu_print_chipinfo(struct rtl8xxxu_priv *priv)
static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
{
struct device *dev = &priv->udev->dev;
- u32 val32, bonding;
+ u32 val32, bonding, sys_cfg;
u16 val16;
- val32 = rtl8xxxu_read32(priv, REG_SYS_CFG);
- priv->chip_cut = (val32 & SYS_CFG_CHIP_VERSION_MASK) >>
+ sys_cfg = rtl8xxxu_read32(priv, REG_SYS_CFG);
+ priv->chip_cut = (sys_cfg & SYS_CFG_CHIP_VERSION_MASK) >>
SYS_CFG_CHIP_VERSION_SHIFT;
- if (val32 & SYS_CFG_TRP_VAUX_EN) {
+ if (sys_cfg & SYS_CFG_TRP_VAUX_EN) {
dev_info(dev, "Unsupported test chip\n");
return -ENOTSUPP;
}
- if (val32 & SYS_CFG_BT_FUNC) {
+ if (sys_cfg & SYS_CFG_BT_FUNC) {
if (priv->chip_cut >= 3) {
sprintf(priv->chip_name, "8723BU");
priv->rtl_chip = RTL8723B;
@@ -1640,7 +1640,7 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
if (val32 & MULTI_GPS_FUNC_EN)
priv->has_gps = 1;
priv->is_multi_func = 1;
- } else if (val32 & SYS_CFG_TYPE_ID) {
+ } else if (sys_cfg & SYS_CFG_TYPE_ID) {
bonding = rtl8xxxu_read32(priv, REG_HPON_FSM);
bonding &= HPON_FSM_BONDING_MASK;
if (priv->fops->tx_desc_size ==
@@ -1688,7 +1688,7 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
case RTL8188E:
case RTL8192E:
case RTL8723B:
- switch (val32 & SYS_CFG_VENDOR_EXT_MASK) {
+ switch (sys_cfg & SYS_CFG_VENDOR_EXT_MASK) {
case SYS_CFG_VENDOR_ID_TSMC:
sprintf(priv->chip_vendor, "TSMC");
break;
@@ -1705,7 +1705,7 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
}
break;
default:
- if (val32 & SYS_CFG_VENDOR_ID) {
+ if (sys_cfg & SYS_CFG_VENDOR_ID) {
sprintf(priv->chip_vendor, "UMC");
priv->vendor_umc = 1;
} else {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 144/731] drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (142 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 143/731] wifi: rtl8xxxu: Fix reading the vendor of combo chips Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 145/731] libbpf: Fix use-after-free in btf_dump_name_dups Greg Kroah-Hartman
` (597 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Baryshkov, Abhinav Kumar,
Robert Foss, Sasha Levin
From: Abhinav Kumar <quic_abhinavk@quicinc.com>
[ Upstream commit 9a0cdcd6649b76f0b7ceec0e55b0a718321e34d3 ]
adv7533 bridge tries to dynamically switch lanes based on the
mode by detaching and attaching the mipi dsi device.
This approach is incorrect because this method of dynamic switch of
detaching and attaching the mipi dsi device also results in removing
and adding the component which is not necessary.
This approach is also prone to deadlocks. So for example, on the
db410c whenever this path is executed with lockdep enabled,
this results in a deadlock due to below ordering of locks.
-> #1 (crtc_ww_class_acquire){+.+.}-{0:0}:
lock_acquire+0x6c/0x90
drm_modeset_acquire_init+0xf4/0x150
drmm_mode_config_init+0x220/0x770
msm_drm_bind+0x13c/0x654
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa8/0x174
component_add+0x18/0x2c
dsi_dev_attach+0x24/0x30
dsi_host_attach+0x98/0x14c
devm_mipi_dsi_attach+0x38/0xb0
adv7533_attach_dsi+0x8c/0x110
adv7511_probe+0x5a0/0x930
i2c_device_probe+0x30c/0x350
really_probe.part.0+0x9c/0x2b0
__driver_probe_device+0x98/0x144
driver_probe_device+0xac/0x14c
__device_attach_driver+0xbc/0x124
bus_for_each_drv+0x78/0xd0
__device_attach+0xa8/0x1c0
device_initial_probe+0x18/0x24
bus_probe_device+0xa0/0xac
deferred_probe_work_func+0x90/0xd0
process_one_work+0x28c/0x6b0
worker_thread+0x240/0x444
kthread+0x110/0x114
ret_from_fork+0x10/0x20
-> #0 (component_mutex){+.+.}-{3:3}:
__lock_acquire+0x1280/0x20ac
lock_acquire.part.0+0xe0/0x230
lock_acquire+0x6c/0x90
__mutex_lock+0x84/0x400
mutex_lock_nested+0x3c/0x70
component_del+0x34/0x170
dsi_dev_detach+0x24/0x30
dsi_host_detach+0x20/0x64
mipi_dsi_detach+0x2c/0x40
adv7533_mode_set+0x64/0x90
adv7511_bridge_mode_set+0x210/0x214
drm_bridge_chain_mode_set+0x5c/0x84
crtc_set_mode+0x18c/0x1dc
drm_atomic_helper_commit_modeset_disables+0x40/0x50
msm_atomic_commit_tail+0x1d0/0x6e0
commit_tail+0xa4/0x180
drm_atomic_helper_commit+0x178/0x3b0
drm_atomic_commit+0xa4/0xe0
drm_client_modeset_commit_atomic+0x228/0x284
drm_client_modeset_commit_locked+0x64/0x1d0
drm_client_modeset_commit+0x34/0x60
drm_fb_helper_lastclose+0x74/0xcc
drm_lastclose+0x3c/0x80
drm_release+0xfc/0x114
__fput+0x70/0x224
____fput+0x14/0x20
task_work_run+0x88/0x1a0
do_exit+0x350/0xa50
do_group_exit+0x38/0xa4
__wake_up_parent+0x0/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x60/0x11c
do_el0_svc+0x30/0xc0
el0_svc+0x58/0x100
el0t_64_sync_handler+0x1b0/0x1bc
el0t_64_sync+0x18c/0x190
Due to above reasons, remove the dynamic lane switching
code from adv7533 bridge chip and filter out the modes
which would need different number of lanes as compared
to the initialization time using the mode_valid callback.
This can be potentially re-introduced by using the pre_enable()
callback but this needs to be evaluated first whether such an
approach will work so this will be done with a separate change.
changes since RFC:
- Fix commit text and add TODO comment
changes in v2:
- Fix checkpatch formatting errors
Fixes: 62b2f026cd8e ("drm/bridge: adv7533: Change number of DSI lanes dynamically")
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/16
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/1661797363-7564-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1665522649-3423-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/bridge/adv7511/adv7511.h | 3 ++-
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 18 ++++++++++----
drivers/gpu/drm/bridge/adv7511/adv7533.c | 25 ++++++++++----------
3 files changed, 29 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index aeeb09a27202..fdd8e3d3232e 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -395,7 +395,8 @@ static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
void adv7533_dsi_power_on(struct adv7511 *adv);
void adv7533_dsi_power_off(struct adv7511 *adv);
-void adv7533_mode_set(struct adv7511 *adv, const struct drm_display_mode *mode);
+enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv,
+ const struct drm_display_mode *mode);
int adv7533_patch_registers(struct adv7511 *adv);
int adv7533_patch_cec_registers(struct adv7511 *adv);
int adv7533_attach_dsi(struct adv7511 *adv);
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 3dc551d223d6..44762116aac9 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -697,7 +697,7 @@ adv7511_detect(struct adv7511 *adv7511, struct drm_connector *connector)
}
static enum drm_mode_status adv7511_mode_valid(struct adv7511 *adv7511,
- struct drm_display_mode *mode)
+ const struct drm_display_mode *mode)
{
if (mode->clock > 165000)
return MODE_CLOCK_HIGH;
@@ -791,9 +791,6 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
regmap_update_bits(adv7511->regmap, 0x17,
0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
- if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
- adv7533_mode_set(adv7511, adj_mode);
-
drm_mode_copy(&adv7511->curr_mode, adj_mode);
/*
@@ -913,6 +910,18 @@ static void adv7511_bridge_mode_set(struct drm_bridge *bridge,
adv7511_mode_set(adv, mode, adj_mode);
}
+static enum drm_mode_status adv7511_bridge_mode_valid(struct drm_bridge *bridge,
+ const struct drm_display_info *info,
+ const struct drm_display_mode *mode)
+{
+ struct adv7511 *adv = bridge_to_adv7511(bridge);
+
+ if (adv->type == ADV7533 || adv->type == ADV7535)
+ return adv7533_mode_valid(adv, mode);
+ else
+ return adv7511_mode_valid(adv, mode);
+}
+
static int adv7511_bridge_attach(struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags)
{
@@ -963,6 +972,7 @@ static const struct drm_bridge_funcs adv7511_bridge_funcs = {
.enable = adv7511_bridge_enable,
.disable = adv7511_bridge_disable,
.mode_set = adv7511_bridge_mode_set,
+ .mode_valid = adv7511_bridge_mode_valid,
.attach = adv7511_bridge_attach,
.detect = adv7511_bridge_detect,
.get_edid = adv7511_bridge_get_edid,
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c
index 59d718bde8c4..7eda12f338a1 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7533.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
@@ -100,26 +100,27 @@ void adv7533_dsi_power_off(struct adv7511 *adv)
regmap_write(adv->regmap_cec, 0x27, 0x0b);
}
-void adv7533_mode_set(struct adv7511 *adv, const struct drm_display_mode *mode)
+enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv,
+ const struct drm_display_mode *mode)
{
+ int lanes;
struct mipi_dsi_device *dsi = adv->dsi;
- int lanes, ret;
-
- if (adv->num_dsi_lanes != 4)
- return;
if (mode->clock > 80000)
lanes = 4;
else
lanes = 3;
- if (lanes != dsi->lanes) {
- mipi_dsi_detach(dsi);
- dsi->lanes = lanes;
- ret = mipi_dsi_attach(dsi);
- if (ret)
- dev_err(&dsi->dev, "failed to change host lanes\n");
- }
+ /*
+ * TODO: add support for dynamic switching of lanes
+ * by using the bridge pre_enable() op . Till then filter
+ * out the modes which shall need different number of lanes
+ * than what was configured in the device tree.
+ */
+ if (lanes != dsi->lanes)
+ return MODE_BAD;
+
+ return MODE_OK;
}
int adv7533_patch_registers(struct adv7511 *adv)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 145/731] libbpf: Fix use-after-free in btf_dump_name_dups
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (143 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 144/731] drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 146/731] libbpf: Fix null-pointer dereference in find_prog_by_sec_insn() Greg Kroah-Hartman
` (596 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xu Kuohai, Andrii Nakryiko,
Martin KaFai Lau, Sasha Levin
From: Xu Kuohai <xukuohai@huawei.com>
[ Upstream commit 93c660ca40b5d2f7c1b1626e955a8e9fa30e0749 ]
ASAN reports an use-after-free in btf_dump_name_dups:
ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928
READ of size 2 at 0xffff927006db thread T0
#0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614)
#1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127
#2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143
#3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212
#4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525
#5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552
#6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567
#7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912
#8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798
#9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282
#10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236
#11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#15 0xaaaab5d65990 (test_progs+0x185990)
0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0)
freed by thread T0 here:
#0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4)
#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191
#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163
#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106
#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157
#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519
#6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032
#7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232
#8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#12 0xaaaab5d65990 (test_progs+0x185990)
previously allocated by thread T0 here:
#0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4)
#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191
#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163
#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106
#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157
#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519
#6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070
#7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102
#8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162
#9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#13 0xaaaab5d65990 (test_progs+0x185990)
The reason is that the key stored in hash table name_map is a string
address, and the string memory is allocated by realloc() function, when
the memory is resized by realloc() later, the old memory may be freed,
so the address stored in name_map references to a freed memory, causing
use-after-free.
Fix it by storing duplicated string address in name_map.
Fixes: 919d2b1dbb07 ("libbpf: Allow modification of BTF and add btf__add_str API")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20221011120108.782373-2-xukuohai@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/btf_dump.c | 29 ++++++++++++++++++++++++++---
1 file changed, 26 insertions(+), 3 deletions(-)
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index 841cc68e3f42..9bcd75dc12cc 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -215,6 +215,17 @@ static int btf_dump_resize(struct btf_dump *d)
return 0;
}
+static void btf_dump_free_names(struct hashmap *map)
+{
+ size_t bkt;
+ struct hashmap_entry *cur;
+
+ hashmap__for_each_entry(map, cur, bkt)
+ free((void *)cur->key);
+
+ hashmap__free(map);
+}
+
void btf_dump__free(struct btf_dump *d)
{
int i;
@@ -233,8 +244,8 @@ void btf_dump__free(struct btf_dump *d)
free(d->cached_names);
free(d->emit_queue);
free(d->decl_stack);
- hashmap__free(d->type_names);
- hashmap__free(d->ident_names);
+ btf_dump_free_names(d->type_names);
+ btf_dump_free_names(d->ident_names);
free(d);
}
@@ -1457,11 +1468,23 @@ static void btf_dump_emit_type_cast(struct btf_dump *d, __u32 id,
static size_t btf_dump_name_dups(struct btf_dump *d, struct hashmap *name_map,
const char *orig_name)
{
+ char *old_name, *new_name;
size_t dup_cnt = 0;
+ int err;
+
+ new_name = strdup(orig_name);
+ if (!new_name)
+ return 1;
hashmap__find(name_map, orig_name, (void **)&dup_cnt);
dup_cnt++;
- hashmap__set(name_map, orig_name, (void *)dup_cnt, NULL, NULL);
+
+ err = hashmap__set(name_map, new_name, (void *)dup_cnt,
+ (const void **)&old_name, NULL);
+ if (err)
+ free(new_name);
+
+ free(old_name);
return dup_cnt;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 146/731] libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (144 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 145/731] libbpf: Fix use-after-free in btf_dump_name_dups Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 147/731] ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros Greg Kroah-Hartman
` (595 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shung-Hsi Yu, Andrii Nakryiko, Sasha Levin
From: Shung-Hsi Yu <shung-hsi.yu@suse.com>
[ Upstream commit d0d382f95a9270dcf803539d6781d6bd67e3f5b2 ]
When there are no program sections, obj->programs is left unallocated,
and find_prog_by_sec_insn()'s search lands on &obj->programs[0] == NULL,
and will cause null-pointer dereference in the following access to
prog->sec_idx.
Guard the search with obj->nr_programs similar to what's being done in
__bpf_program__iter() to prevent null-pointer access from happening.
Fixes: db2b8b06423c ("libbpf: Support CO-RE relocations for multi-prog sections")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221012022353.7350-4-shung-hsi.yu@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/libbpf.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 050622649797..f87a15bbf53b 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -3763,6 +3763,9 @@ static struct bpf_program *find_prog_by_sec_insn(const struct bpf_object *obj,
int l = 0, r = obj->nr_programs - 1, m;
struct bpf_program *prog;
+ if (!obj->nr_programs)
+ return NULL;
+
while (l < r) {
m = l + (r - l + 1) / 2;
prog = &obj->programs[m];
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 147/731] ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (145 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 146/731] libbpf: Fix null-pointer dereference in find_prog_by_sec_insn() Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 148/731] ata: add/use ata_taskfile::{error|status} fields Greg Kroah-Hartman
` (594 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hannes Reinecke, Damien Le Moal,
Sasha Levin
From: Hannes Reinecke <hare@suse.de>
[ Upstream commit 742bef476ca5352b16063161fb73a56629a6d995 ]
Use standard pr_{debug,info,notice,warn,err} macros instead of the
hand-crafted printk helpers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Stable-dep-of: 7390896b3484 ("ata: libata: fix NCQ autosense logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/libata-acpi.c | 48 +++++++++++++------------
drivers/ata/libata-core.c | 61 -------------------------------
drivers/ata/pata_ixp4xx_cf.c | 6 ++--
include/linux/libata.h | 69 ++++++++++++++++++++----------------
4 files changed, 67 insertions(+), 117 deletions(-)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 7a7d6642edcc..7007377880ce 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -650,9 +650,7 @@ static int ata_acpi_run_tf(struct ata_device *dev,
struct ata_taskfile *pptf = NULL;
struct ata_taskfile tf, ptf, rtf;
unsigned int err_mask;
- const char *level;
const char *descr;
- char msg[60];
int rc;
if ((gtf->tf[0] == 0) && (gtf->tf[1] == 0) && (gtf->tf[2] == 0)
@@ -666,6 +664,10 @@ static int ata_acpi_run_tf(struct ata_device *dev,
pptf = &ptf;
}
+ descr = ata_get_cmd_descript(tf.command);
+ if (!descr)
+ descr = "unknown";
+
if (!ata_acpi_filter_tf(dev, &tf, pptf)) {
rtf = tf;
err_mask = ata_exec_internal(dev, &rtf, NULL,
@@ -673,40 +675,42 @@ static int ata_acpi_run_tf(struct ata_device *dev,
switch (err_mask) {
case 0:
- level = KERN_DEBUG;
- snprintf(msg, sizeof(msg), "succeeded");
+ ata_dev_dbg(dev,
+ "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x"
+ "(%s) succeeded\n",
+ tf.command, tf.feature, tf.nsect, tf.lbal,
+ tf.lbam, tf.lbah, tf.device, descr);
rc = 1;
break;
case AC_ERR_DEV:
- level = KERN_INFO;
- snprintf(msg, sizeof(msg),
- "rejected by device (Stat=0x%02x Err=0x%02x)",
- rtf.command, rtf.feature);
+ ata_dev_info(dev,
+ "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x"
+ "(%s) rejected by device (Stat=0x%02x Err=0x%02x)",
+ tf.command, tf.feature, tf.nsect, tf.lbal,
+ tf.lbam, tf.lbah, tf.device, descr,
+ rtf.command, rtf.feature);
rc = 0;
break;
default:
- level = KERN_ERR;
- snprintf(msg, sizeof(msg),
- "failed (Emask=0x%x Stat=0x%02x Err=0x%02x)",
- err_mask, rtf.command, rtf.feature);
+ ata_dev_err(dev,
+ "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x"
+ "(%s) failed (Emask=0x%x Stat=0x%02x Err=0x%02x)",
+ tf.command, tf.feature, tf.nsect, tf.lbal,
+ tf.lbam, tf.lbah, tf.device, descr,
+ err_mask, rtf.command, rtf.feature);
rc = -EIO;
break;
}
} else {
- level = KERN_INFO;
- snprintf(msg, sizeof(msg), "filtered out");
+ ata_dev_info(dev,
+ "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x"
+ "(%s) filtered out\n",
+ tf.command, tf.feature, tf.nsect, tf.lbal,
+ tf.lbam, tf.lbah, tf.device, descr);
rc = 0;
}
- descr = ata_get_cmd_descript(tf.command);
-
- ata_dev_printk(dev, level,
- "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x (%s) %s\n",
- tf.command, tf.feature, tf.nsect, tf.lbal,
- tf.lbam, tf.lbah, tf.device,
- (descr ? descr : "unknown"), msg);
-
return rc;
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4d308e3163c3..1c9ad3045606 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6497,67 +6497,6 @@ const struct ata_port_info ata_dummy_port_info = {
};
EXPORT_SYMBOL_GPL(ata_dummy_port_info);
-/*
- * Utility print functions
- */
-void ata_port_printk(const struct ata_port *ap, const char *level,
- const char *fmt, ...)
-{
- struct va_format vaf;
- va_list args;
-
- va_start(args, fmt);
-
- vaf.fmt = fmt;
- vaf.va = &args;
-
- printk("%sata%u: %pV", level, ap->print_id, &vaf);
-
- va_end(args);
-}
-EXPORT_SYMBOL(ata_port_printk);
-
-void ata_link_printk(const struct ata_link *link, const char *level,
- const char *fmt, ...)
-{
- struct va_format vaf;
- va_list args;
-
- va_start(args, fmt);
-
- vaf.fmt = fmt;
- vaf.va = &args;
-
- if (sata_pmp_attached(link->ap) || link->ap->slave_link)
- printk("%sata%u.%02u: %pV",
- level, link->ap->print_id, link->pmp, &vaf);
- else
- printk("%sata%u: %pV",
- level, link->ap->print_id, &vaf);
-
- va_end(args);
-}
-EXPORT_SYMBOL(ata_link_printk);
-
-void ata_dev_printk(const struct ata_device *dev, const char *level,
- const char *fmt, ...)
-{
- struct va_format vaf;
- va_list args;
-
- va_start(args, fmt);
-
- vaf.fmt = fmt;
- vaf.va = &args;
-
- printk("%sata%u.%02u: %pV",
- level, dev->link->ap->print_id, dev->link->pmp + dev->devno,
- &vaf);
-
- va_end(args);
-}
-EXPORT_SYMBOL(ata_dev_printk);
-
void ata_print_version(const struct device *dev, const char *version)
{
dev_printk(KERN_DEBUG, dev, "version %s\n", version);
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 99c63087c8ae..17b557c91e1c 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -114,7 +114,7 @@ static void ixp4xx_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct ixp4xx_pata *ixpp = ap->host->private_data;
- ata_dev_printk(adev, KERN_INFO, "configured for PIO%d 8bit\n",
+ ata_dev_info(adev, "configured for PIO%d 8bit\n",
adev->pio_mode - XFER_PIO_0);
ixp4xx_set_8bit_timing(ixpp, adev->pio_mode);
}
@@ -132,8 +132,8 @@ static unsigned int ixp4xx_mmio_data_xfer(struct ata_queued_cmd *qc,
struct ixp4xx_pata *ixpp = ap->host->private_data;
unsigned long flags;
- ata_dev_printk(adev, KERN_DEBUG, "%s %d bytes\n", (rw == READ) ? "READ" : "WRITE",
- buflen);
+ ata_dev_dbg(adev, "%s %d bytes\n", (rw == READ) ? "READ" : "WRITE",
+ buflen);
spin_lock_irqsave(ap->lock, flags);
/* set the expansion bus in 16bit mode and restore
diff --git a/include/linux/libata.h b/include/linux/libata.h
index a64e12605d31..e9c79a72f5e6 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1471,51 +1471,61 @@ static inline int sata_srst_pmp(struct ata_link *link)
return link->pmp;
}
-/*
- * printk helpers
- */
-__printf(3, 4)
-void ata_port_printk(const struct ata_port *ap, const char *level,
- const char *fmt, ...);
-__printf(3, 4)
-void ata_link_printk(const struct ata_link *link, const char *level,
- const char *fmt, ...);
-__printf(3, 4)
-void ata_dev_printk(const struct ata_device *dev, const char *level,
- const char *fmt, ...);
+#define ata_port_printk(level, ap, fmt, ...) \
+ pr_ ## level ("ata%u: " fmt, (ap)->print_id, ##__VA_ARGS__)
#define ata_port_err(ap, fmt, ...) \
- ata_port_printk(ap, KERN_ERR, fmt, ##__VA_ARGS__)
+ ata_port_printk(err, ap, fmt, ##__VA_ARGS__)
#define ata_port_warn(ap, fmt, ...) \
- ata_port_printk(ap, KERN_WARNING, fmt, ##__VA_ARGS__)
+ ata_port_printk(warn, ap, fmt, ##__VA_ARGS__)
#define ata_port_notice(ap, fmt, ...) \
- ata_port_printk(ap, KERN_NOTICE, fmt, ##__VA_ARGS__)
+ ata_port_printk(notice, ap, fmt, ##__VA_ARGS__)
#define ata_port_info(ap, fmt, ...) \
- ata_port_printk(ap, KERN_INFO, fmt, ##__VA_ARGS__)
+ ata_port_printk(info, ap, fmt, ##__VA_ARGS__)
#define ata_port_dbg(ap, fmt, ...) \
- ata_port_printk(ap, KERN_DEBUG, fmt, ##__VA_ARGS__)
+ ata_port_printk(debug, ap, fmt, ##__VA_ARGS__)
+
+#define ata_link_printk(level, link, fmt, ...) \
+do { \
+ if (sata_pmp_attached((link)->ap) || \
+ (link)->ap->slave_link) \
+ pr_ ## level ("ata%u.%02u: " fmt, \
+ (link)->ap->print_id, \
+ (link)->pmp, \
+ ##__VA_ARGS__); \
+ else \
+ pr_ ## level ("ata%u: " fmt, \
+ (link)->ap->print_id, \
+ ##__VA_ARGS__); \
+} while (0)
#define ata_link_err(link, fmt, ...) \
- ata_link_printk(link, KERN_ERR, fmt, ##__VA_ARGS__)
+ ata_link_printk(err, link, fmt, ##__VA_ARGS__)
#define ata_link_warn(link, fmt, ...) \
- ata_link_printk(link, KERN_WARNING, fmt, ##__VA_ARGS__)
+ ata_link_printk(warn, link, fmt, ##__VA_ARGS__)
#define ata_link_notice(link, fmt, ...) \
- ata_link_printk(link, KERN_NOTICE, fmt, ##__VA_ARGS__)
+ ata_link_printk(notice, link, fmt, ##__VA_ARGS__)
#define ata_link_info(link, fmt, ...) \
- ata_link_printk(link, KERN_INFO, fmt, ##__VA_ARGS__)
+ ata_link_printk(info, link, fmt, ##__VA_ARGS__)
#define ata_link_dbg(link, fmt, ...) \
- ata_link_printk(link, KERN_DEBUG, fmt, ##__VA_ARGS__)
+ ata_link_printk(debug, link, fmt, ##__VA_ARGS__)
+
+#define ata_dev_printk(level, dev, fmt, ...) \
+ pr_ ## level("ata%u.%02u: " fmt, \
+ (dev)->link->ap->print_id, \
+ (dev)->link->pmp + (dev)->devno, \
+ ##__VA_ARGS__)
#define ata_dev_err(dev, fmt, ...) \
- ata_dev_printk(dev, KERN_ERR, fmt, ##__VA_ARGS__)
+ ata_dev_printk(err, dev, fmt, ##__VA_ARGS__)
#define ata_dev_warn(dev, fmt, ...) \
- ata_dev_printk(dev, KERN_WARNING, fmt, ##__VA_ARGS__)
+ ata_dev_printk(warn, dev, fmt, ##__VA_ARGS__)
#define ata_dev_notice(dev, fmt, ...) \
- ata_dev_printk(dev, KERN_NOTICE, fmt, ##__VA_ARGS__)
+ ata_dev_printk(notice, dev, fmt, ##__VA_ARGS__)
#define ata_dev_info(dev, fmt, ...) \
- ata_dev_printk(dev, KERN_INFO, fmt, ##__VA_ARGS__)
+ ata_dev_printk(info, dev, fmt, ##__VA_ARGS__)
#define ata_dev_dbg(dev, fmt, ...) \
- ata_dev_printk(dev, KERN_DEBUG, fmt, ##__VA_ARGS__)
+ ata_dev_printk(debug, dev, fmt, ##__VA_ARGS__)
void ata_print_version(const struct device *dev, const char *version);
@@ -2049,11 +2059,8 @@ static inline u8 ata_wait_idle(struct ata_port *ap)
{
u8 status = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
-#ifdef ATA_DEBUG
if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ)))
- ata_port_printk(ap, KERN_DEBUG, "abnormal Status 0x%X\n",
- status);
-#endif
+ ata_port_dbg(ap, "abnormal Status 0x%X\n", status);
return status;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 148/731] ata: add/use ata_taskfile::{error|status} fields
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (146 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 147/731] ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 149/731] ata: libata: fix NCQ autosense logic Greg Kroah-Hartman
` (593 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sergey Shtylyov, Damien Le Moal,
Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omp.ru>
[ Upstream commit efcef265fd83d9a68a68926abecb3e1dd3e260a8 ]
Add the explicit error and status register fields to 'struct ata_taskfile'
using the anonymous *union*s ('struct ide_taskfile' had that for ages!) and
update the libata taskfile code accordingly. There should be no object code
changes resulting from that...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Stable-dep-of: 7390896b3484 ("ata: libata: fix NCQ autosense logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/acard-ahci.c | 2 +-
drivers/ata/ahci.c | 4 ++--
drivers/ata/ahci_qoriq.c | 2 +-
drivers/ata/ahci_xgene.c | 2 +-
drivers/ata/libahci.c | 4 ++--
drivers/ata/libata-acpi.c | 8 +++----
drivers/ata/libata-core.c | 12 +++++-----
drivers/ata/libata-eh.c | 42 +++++++++++++++++------------------
drivers/ata/libata-sata.c | 10 ++++-----
drivers/ata/libata-scsi.c | 22 +++++++++---------
drivers/ata/libata-sff.c | 6 ++---
drivers/ata/pata_ep93xx.c | 4 ++--
drivers/ata/pata_ns87415.c | 4 ++--
drivers/ata/pata_octeon_cf.c | 4 ++--
drivers/ata/pata_samsung_cf.c | 2 +-
drivers/ata/sata_highbank.c | 2 +-
drivers/ata/sata_inic162x.c | 10 ++++-----
drivers/ata/sata_rcar.c | 4 ++--
drivers/ata/sata_svw.c | 10 ++++-----
drivers/ata/sata_vsc.c | 10 ++++-----
include/linux/libata.h | 10 +++++++--
21 files changed, 90 insertions(+), 84 deletions(-)
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index 2a04e8abd397..26e0eb537b4f 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -267,7 +267,7 @@ static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE &&
!(qc->flags & ATA_QCFLAG_FAILED)) {
ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf);
- qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15];
+ qc->result_tf.status = (rx_fis + RX_FIS_PIO_SETUP)[15];
} else
ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf);
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 812731e80f8e..c1bf7117a9ff 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -735,7 +735,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(link->device, &tf);
- tf.command = ATA_BUSY;
+ tf.status = ATA_BUSY;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
@@ -806,7 +806,7 @@ static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class,
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(link->device, &tf);
- tf.command = ATA_BUSY;
+ tf.status = ATA_BUSY;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
rc = sata_link_hardreset(link, timing, deadline, &online,
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index 5b46fc9aeb4a..e5ac3d1c214c 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -125,7 +125,7 @@ static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class,
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(link->device, &tf);
- tf.command = ATA_BUSY;
+ tf.status = ATA_BUSY;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
rc = sata_link_hardreset(link, timing, deadline, &online,
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index dffc432b9d54..292099410cf6 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -365,7 +365,7 @@ static int xgene_ahci_do_hardreset(struct ata_link *link,
do {
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(link->device, &tf);
- tf.command = ATA_BUSY;
+ tf.status = ATA_BUSY;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
rc = sata_link_hardreset(link, timing, deadline, online,
ahci_check_ready);
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 395772fa3943..192115a45dd7 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1552,7 +1552,7 @@ int ahci_do_hardreset(struct ata_link *link, unsigned int *class,
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(link->device, &tf);
- tf.command = ATA_BUSY;
+ tf.status = ATA_BUSY;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
rc = sata_link_hardreset(link, timing, deadline, online,
@@ -2038,7 +2038,7 @@ static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE &&
!(qc->flags & ATA_QCFLAG_FAILED)) {
ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf);
- qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15];
+ qc->result_tf.status = (rx_fis + RX_FIS_PIO_SETUP)[15];
} else
ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf);
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 7007377880ce..d15f3e908ea4 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -554,13 +554,13 @@ static void ata_acpi_gtf_to_tf(struct ata_device *dev,
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- tf->feature = gtf->tf[0]; /* 0x1f1 */
+ tf->error = gtf->tf[0]; /* 0x1f1 */
tf->nsect = gtf->tf[1]; /* 0x1f2 */
tf->lbal = gtf->tf[2]; /* 0x1f3 */
tf->lbam = gtf->tf[3]; /* 0x1f4 */
tf->lbah = gtf->tf[4]; /* 0x1f5 */
tf->device = gtf->tf[5]; /* 0x1f6 */
- tf->command = gtf->tf[6]; /* 0x1f7 */
+ tf->status = gtf->tf[6]; /* 0x1f7 */
}
static int ata_acpi_filter_tf(struct ata_device *dev,
@@ -689,7 +689,7 @@ static int ata_acpi_run_tf(struct ata_device *dev,
"(%s) rejected by device (Stat=0x%02x Err=0x%02x)",
tf.command, tf.feature, tf.nsect, tf.lbal,
tf.lbam, tf.lbah, tf.device, descr,
- rtf.command, rtf.feature);
+ rtf.status, rtf.error);
rc = 0;
break;
@@ -699,7 +699,7 @@ static int ata_acpi_run_tf(struct ata_device *dev,
"(%s) failed (Emask=0x%x Stat=0x%02x Err=0x%02x)",
tf.command, tf.feature, tf.nsect, tf.lbal,
tf.lbam, tf.lbah, tf.device, descr,
- err_mask, rtf.command, rtf.feature);
+ err_mask, rtf.status, rtf.error);
rc = -EIO;
break;
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 1c9ad3045606..c430cd3cfa17 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1185,7 +1185,7 @@ static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors)
ata_dev_warn(dev,
"failed to read native max address (err_mask=0x%x)\n",
err_mask);
- if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
+ if (err_mask == AC_ERR_DEV && (tf.error & ATA_ABORTED))
return -EACCES;
return -EIO;
}
@@ -1249,7 +1249,7 @@ static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors)
"failed to set max address (err_mask=0x%x)\n",
err_mask);
if (err_mask == AC_ERR_DEV &&
- (tf.feature & (ATA_ABORTED | ATA_IDNF)))
+ (tf.error & (ATA_ABORTED | ATA_IDNF)))
return -EACCES;
return -EIO;
}
@@ -1616,7 +1616,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
/* perform minimal error analysis */
if (qc->flags & ATA_QCFLAG_FAILED) {
- if (qc->result_tf.command & (ATA_ERR | ATA_DF))
+ if (qc->result_tf.status & (ATA_ERR | ATA_DF))
qc->err_mask |= AC_ERR_DEV;
if (!qc->err_mask)
@@ -1625,7 +1625,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
if (qc->err_mask & ~AC_ERR_OTHER)
qc->err_mask &= ~AC_ERR_OTHER;
} else if (qc->tf.command == ATA_CMD_REQ_SENSE_DATA) {
- qc->result_tf.command |= ATA_SENSE;
+ qc->result_tf.status |= ATA_SENSE;
}
/* finish up */
@@ -1848,7 +1848,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
return 0;
}
- if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
+ if ((err_mask == AC_ERR_DEV) && (tf.error & ATA_ABORTED)) {
/* Device or controller might have reported
* the wrong device class. Give a shot at the
* other IDENTIFY if the current one is
@@ -4371,7 +4371,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
/* A clean abort indicates an original or just out of spec drive
and we should continue as we issue the setup based on the
drive reported working geometry */
- if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
+ if (err_mask == AC_ERR_DEV && (tf.error & ATA_ABORTED))
err_mask = 0;
DPRINTK("EXIT, err_mask=%x\n", err_mask);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 7aea631edb27..8350abc17290 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1386,7 +1386,7 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
err_mask = ata_exec_internal(dev, &tf, cdb, DMA_NONE, NULL, 0, 0);
if (err_mask == AC_ERR_DEV)
- *r_sense_key = tf.feature >> 4;
+ *r_sense_key = tf.error >> 4;
return err_mask;
}
@@ -1431,12 +1431,12 @@ static void ata_eh_request_sense(struct ata_queued_cmd *qc,
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
/* Ignore err_mask; ATA_ERR might be set */
- if (tf.command & ATA_SENSE) {
+ if (tf.status & ATA_SENSE) {
ata_scsi_set_sense(dev, cmd, tf.lbah, tf.lbam, tf.lbal);
qc->flags |= ATA_QCFLAG_SENSE_VALID;
} else {
ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
- tf.command, err_mask);
+ tf.status, err_mask);
}
}
@@ -1561,7 +1561,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
const struct ata_taskfile *tf)
{
unsigned int tmp, action = 0;
- u8 stat = tf->command, err = tf->feature;
+ u8 stat = tf->status, err = tf->error;
if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) {
qc->err_mask |= AC_ERR_HSM;
@@ -1598,7 +1598,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
tmp = atapi_eh_request_sense(qc->dev,
qc->scsicmd->sense_buffer,
- qc->result_tf.feature >> 4);
+ qc->result_tf.error >> 4);
if (!tmp)
qc->flags |= ATA_QCFLAG_SENSE_VALID;
else
@@ -2372,7 +2372,7 @@ static void ata_eh_link_report(struct ata_link *link)
cmd->hob_feature, cmd->hob_nsect,
cmd->hob_lbal, cmd->hob_lbam, cmd->hob_lbah,
cmd->device, qc->tag, data_buf, cdb_buf,
- res->command, res->feature, res->nsect,
+ res->status, res->error, res->nsect,
res->lbal, res->lbam, res->lbah,
res->hob_feature, res->hob_nsect,
res->hob_lbal, res->hob_lbam, res->hob_lbah,
@@ -2380,28 +2380,28 @@ static void ata_eh_link_report(struct ata_link *link)
qc->err_mask & AC_ERR_NCQ ? " <F>" : "");
#ifdef CONFIG_ATA_VERBOSE_ERROR
- if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
- ATA_SENSE | ATA_ERR)) {
- if (res->command & ATA_BUSY)
+ if (res->status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
+ ATA_SENSE | ATA_ERR)) {
+ if (res->status & ATA_BUSY)
ata_dev_err(qc->dev, "status: { Busy }\n");
else
ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
- res->command & ATA_DRDY ? "DRDY " : "",
- res->command & ATA_DF ? "DF " : "",
- res->command & ATA_DRQ ? "DRQ " : "",
- res->command & ATA_SENSE ? "SENSE " : "",
- res->command & ATA_ERR ? "ERR " : "");
+ res->status & ATA_DRDY ? "DRDY " : "",
+ res->status & ATA_DF ? "DF " : "",
+ res->status & ATA_DRQ ? "DRQ " : "",
+ res->status & ATA_SENSE ? "SENSE " : "",
+ res->status & ATA_ERR ? "ERR " : "");
}
if (cmd->command != ATA_CMD_PACKET &&
- (res->feature & (ATA_ICRC | ATA_UNC | ATA_AMNF |
- ATA_IDNF | ATA_ABORTED)))
+ (res->error & (ATA_ICRC | ATA_UNC | ATA_AMNF | ATA_IDNF |
+ ATA_ABORTED)))
ata_dev_err(qc->dev, "error: { %s%s%s%s%s}\n",
- res->feature & ATA_ICRC ? "ICRC " : "",
- res->feature & ATA_UNC ? "UNC " : "",
- res->feature & ATA_AMNF ? "AMNF " : "",
- res->feature & ATA_IDNF ? "IDNF " : "",
- res->feature & ATA_ABORTED ? "ABRT " : "");
+ res->error & ATA_ICRC ? "ICRC " : "",
+ res->error & ATA_UNC ? "UNC " : "",
+ res->error & ATA_AMNF ? "AMNF " : "",
+ res->error & ATA_IDNF ? "IDNF " : "",
+ res->error & ATA_ABORTED ? "ABRT " : "");
#endif
}
}
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 8f3ff830ab0c..1e59e5b6b047 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -191,8 +191,8 @@ EXPORT_SYMBOL_GPL(ata_tf_to_fis);
void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
{
- tf->command = fis[2]; /* status */
- tf->feature = fis[3]; /* error */
+ tf->status = fis[2];
+ tf->error = fis[3];
tf->lbal = fis[4];
tf->lbam = fis[5];
@@ -1402,8 +1402,8 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
*tag = buf[0] & 0x1f;
- tf->command = buf[2];
- tf->feature = buf[3];
+ tf->status = buf[2];
+ tf->error = buf[3];
tf->lbal = buf[4];
tf->lbam = buf[5];
tf->lbah = buf[6];
@@ -1478,7 +1478,7 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
if (dev->class == ATA_DEV_ZAC &&
- ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary)) {
+ ((qc->result_tf.status & ATA_SENSE) || qc->result_tf.auxiliary)) {
char sense_key, asc, ascq;
sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 061d2f8feeb5..4d8129640d60 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -671,7 +671,7 @@ static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
*/
static void ata_dump_status(unsigned id, struct ata_taskfile *tf)
{
- u8 stat = tf->command, err = tf->feature;
+ u8 stat = tf->status, err = tf->error;
pr_warn("ata%u: status=0x%02x { ", id, stat);
if (stat & ATA_BUSY) {
@@ -867,8 +867,8 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
* onto sense key, asc & ascq.
*/
if (qc->err_mask ||
- tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
- ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
+ tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+ ata_to_sense_error(qc->ap->print_id, tf->status, tf->error,
&sense_key, &asc, &ascq, verbose);
ata_scsi_set_sense(qc->dev, cmd, sense_key, asc, ascq);
} else {
@@ -897,13 +897,13 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
* Copy registers into sense buffer.
*/
desc[2] = 0x00;
- desc[3] = tf->feature; /* == error reg */
+ desc[3] = tf->error;
desc[5] = tf->nsect;
desc[7] = tf->lbal;
desc[9] = tf->lbam;
desc[11] = tf->lbah;
desc[12] = tf->device;
- desc[13] = tf->command; /* == status reg */
+ desc[13] = tf->status;
/*
* Fill in Extend bit, and the high order bytes
@@ -918,8 +918,8 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
}
} else {
/* Fixed sense format */
- desc[0] = tf->feature;
- desc[1] = tf->command; /* status */
+ desc[0] = tf->error;
+ desc[1] = tf->status;
desc[2] = tf->device;
desc[3] = tf->nsect;
desc[7] = 0;
@@ -968,14 +968,14 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
* onto sense key, asc & ascq.
*/
if (qc->err_mask ||
- tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
- ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
+ tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+ ata_to_sense_error(qc->ap->print_id, tf->status, tf->error,
&sense_key, &asc, &ascq, verbose);
ata_scsi_set_sense(dev, cmd, sense_key, asc, ascq);
} else {
/* Could not decode error */
ata_dev_warn(dev, "could not decode error status 0x%x err_mask 0x%x\n",
- tf->command, qc->err_mask);
+ tf->status, qc->err_mask);
ata_scsi_set_sense(dev, cmd, ABORTED_COMMAND, 0, 0);
return;
}
@@ -2490,7 +2490,7 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
/* fill these in, for the case where they are -not- overwritten */
cmd->sense_buffer[0] = 0x70;
- cmd->sense_buffer[2] = qc->tf.feature >> 4;
+ cmd->sense_buffer[2] = qc->tf.error >> 4;
ata_qc_reinit(qc);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index b71ea4a680b0..8409e53b7b7a 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -457,8 +457,8 @@ void ata_sff_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- tf->command = ata_sff_check_status(ap);
- tf->feature = ioread8(ioaddr->error_addr);
+ tf->status = ata_sff_check_status(ap);
+ tf->error = ioread8(ioaddr->error_addr);
tf->nsect = ioread8(ioaddr->nsect_addr);
tf->lbal = ioread8(ioaddr->lbal_addr);
tf->lbam = ioread8(ioaddr->lbam_addr);
@@ -1837,7 +1837,7 @@ unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
memset(&tf, 0, sizeof(tf));
ap->ops->sff_tf_read(ap, &tf);
- err = tf.feature;
+ err = tf.error;
if (r_err)
*r_err = err;
diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
index 46208ececbb6..3fc26026014e 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -416,8 +416,8 @@ static void ep93xx_pata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ep93xx_pata_data *drv_data = ap->host->private_data;
- tf->command = ep93xx_pata_check_status(ap);
- tf->feature = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_FEATURE);
+ tf->status = ep93xx_pata_check_status(ap);
+ tf->error = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_FEATURE);
tf->nsect = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_NSECT);
tf->lbal = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAL);
tf->lbam = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAM);
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index f4949e704356..9dd6bffefb48 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -264,8 +264,8 @@ void ns87560_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- tf->command = ns87560_check_status(ap);
- tf->feature = ioread8(ioaddr->error_addr);
+ tf->status = ns87560_check_status(ap);
+ tf->error = ioread8(ioaddr->error_addr);
tf->nsect = ioread8(ioaddr->nsect_addr);
tf->lbal = ioread8(ioaddr->lbal_addr);
tf->lbam = ioread8(ioaddr->lbam_addr);
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 4cc8a1027888..6c9f2efcedc1 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -386,7 +386,7 @@ static void octeon_cf_tf_read16(struct ata_port *ap, struct ata_taskfile *tf)
void __iomem *base = ap->ioaddr.data_addr;
blob = __raw_readw(base + 0xc);
- tf->feature = blob >> 8;
+ tf->error = blob >> 8;
blob = __raw_readw(base + 2);
tf->nsect = blob & 0xff;
@@ -398,7 +398,7 @@ static void octeon_cf_tf_read16(struct ata_port *ap, struct ata_taskfile *tf)
blob = __raw_readw(base + 6);
tf->device = blob & 0xff;
- tf->command = blob >> 8;
+ tf->status = blob >> 8;
if (tf->flags & ATA_TFLAG_LBA48) {
if (likely(ap->ioaddr.ctl_addr)) {
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
index 3da0e8e30286..149d771c61d6 100644
--- a/drivers/ata/pata_samsung_cf.c
+++ b/drivers/ata/pata_samsung_cf.c
@@ -213,7 +213,7 @@ static void pata_s3c_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- tf->feature = ata_inb(ap->host, ioaddr->error_addr);
+ tf->error = ata_inb(ap->host, ioaddr->error_addr);
tf->nsect = ata_inb(ap->host, ioaddr->nsect_addr);
tf->lbal = ata_inb(ap->host, ioaddr->lbal_addr);
tf->lbam = ata_inb(ap->host, ioaddr->lbam_addr);
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 8440203e835e..f9bb3be4b939 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -400,7 +400,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(link->device, &tf);
- tf.command = ATA_BUSY;
+ tf.status = ATA_BUSY;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
do {
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index e517bd8822a5..659f1a903298 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -559,13 +559,13 @@ static void inic_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
void __iomem *port_base = inic_port_base(ap);
- tf->feature = readb(port_base + PORT_TF_FEATURE);
+ tf->error = readb(port_base + PORT_TF_FEATURE);
tf->nsect = readb(port_base + PORT_TF_NSECT);
tf->lbal = readb(port_base + PORT_TF_LBAL);
tf->lbam = readb(port_base + PORT_TF_LBAM);
tf->lbah = readb(port_base + PORT_TF_LBAH);
tf->device = readb(port_base + PORT_TF_DEVICE);
- tf->command = readb(port_base + PORT_TF_COMMAND);
+ tf->status = readb(port_base + PORT_TF_COMMAND);
}
static bool inic_qc_fill_rtf(struct ata_queued_cmd *qc)
@@ -582,11 +582,11 @@ static bool inic_qc_fill_rtf(struct ata_queued_cmd *qc)
*/
inic_tf_read(qc->ap, &tf);
- if (!(tf.command & ATA_ERR))
+ if (!(tf.status & ATA_ERR))
return false;
- rtf->command = tf.command;
- rtf->feature = tf.feature;
+ rtf->status = tf.status;
+ rtf->error = tf.error;
return true;
}
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 44b0ed8f6bb8..9759e24f718f 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -417,8 +417,8 @@ static void sata_rcar_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- tf->command = sata_rcar_check_status(ap);
- tf->feature = ioread32(ioaddr->error_addr);
+ tf->status = sata_rcar_check_status(ap);
+ tf->error = ioread32(ioaddr->error_addr);
tf->nsect = ioread32(ioaddr->nsect_addr);
tf->lbal = ioread32(ioaddr->lbal_addr);
tf->lbam = ioread32(ioaddr->lbam_addr);
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index f8552559db7f..2e3418a82b44 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -194,24 +194,24 @@ static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- u16 nsect, lbal, lbam, lbah, feature;
+ u16 nsect, lbal, lbam, lbah, error;
- tf->command = k2_stat_check_status(ap);
+ tf->status = k2_stat_check_status(ap);
tf->device = readw(ioaddr->device_addr);
- feature = readw(ioaddr->error_addr);
+ error = readw(ioaddr->error_addr);
nsect = readw(ioaddr->nsect_addr);
lbal = readw(ioaddr->lbal_addr);
lbam = readw(ioaddr->lbam_addr);
lbah = readw(ioaddr->lbah_addr);
- tf->feature = feature;
+ tf->error = error;
tf->nsect = nsect;
tf->lbal = lbal;
tf->lbam = lbam;
tf->lbah = lbah;
if (tf->flags & ATA_TFLAG_LBA48) {
- tf->hob_feature = feature >> 8;
+ tf->hob_feature = error >> 8;
tf->hob_nsect = nsect >> 8;
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 8fa952cb9f7f..87e4ed66b306 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -183,24 +183,24 @@ static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- u16 nsect, lbal, lbam, lbah, feature;
+ u16 nsect, lbal, lbam, lbah, error;
- tf->command = ata_sff_check_status(ap);
+ tf->status = ata_sff_check_status(ap);
tf->device = readw(ioaddr->device_addr);
- feature = readw(ioaddr->error_addr);
+ error = readw(ioaddr->error_addr);
nsect = readw(ioaddr->nsect_addr);
lbal = readw(ioaddr->lbal_addr);
lbam = readw(ioaddr->lbam_addr);
lbah = readw(ioaddr->lbah_addr);
- tf->feature = feature;
+ tf->error = error;
tf->nsect = nsect;
tf->lbal = lbal;
tf->lbam = lbam;
tf->lbah = lbah;
if (tf->flags & ATA_TFLAG_LBA48) {
- tf->hob_feature = feature >> 8;
+ tf->hob_feature = error >> 8;
tf->hob_nsect = nsect >> 8;
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index e9c79a72f5e6..d890c43cff14 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -565,7 +565,10 @@ struct ata_taskfile {
u8 hob_lbam;
u8 hob_lbah;
- u8 feature;
+ union {
+ u8 error;
+ u8 feature;
+ };
u8 nsect;
u8 lbal;
u8 lbam;
@@ -573,7 +576,10 @@ struct ata_taskfile {
u8 device;
- u8 command; /* IO operation */
+ union {
+ u8 status;
+ u8 command;
+ };
u32 auxiliary; /* auxiliary field */
/* from SATA 3.1 and */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 149/731] ata: libata: fix NCQ autosense logic
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (147 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 148/731] ata: add/use ata_taskfile::{error|status} fields Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 150/731] ipmi: kcs: Poll OBF briefly to reduce OBE latency Greg Kroah-Hartman
` (592 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Niklas Cassel, Damien Le Moal, Sasha Levin
From: Niklas Cassel <niklas.cassel@wdc.com>
[ Upstream commit 7390896b3484d44cbdb8bc4859964314ac66d3c9 ]
Currently, the logic if we should call ata_scsi_set_sense()
(and set flag ATA_QCFLAG_SENSE_VALID to indicate that we have
successfully added sense data to the struct ata_queued_cmd)
looks like this:
if (dev->class == ATA_DEV_ZAC &&
((qc->result_tf.status & ATA_SENSE) || qc->result_tf.auxiliary))
The problem with this is that a drive can support the NCQ command
error log without supporting NCQ autosense.
On such a drive, if the failing command has sense data, the status
field in the NCQ command error log will have the ATA_SENSE bit set.
It is just that this sense data is not included in the NCQ command
error log when NCQ autosense is not supported. Instead the sense
data has to be fetched using the REQUEST SENSE DATA EXT command.
Therefore, we should only add the sense data if the drive supports
NCQ autosense AND the ATA_SENSE bit is set in the status field.
Fix this, and at the same time, remove the duplicated ATA_DEV_ZAC
check. The struct ata_taskfile supplied to ata_eh_read_log_10h()
is memset:ed before calling the function, so simply checking if
qc->result_tf.auxiliary is set is sufficient to tell us that the
log actually contained sense data.
Fixes: d238ffd59d3c ("libata: do not attempt to retrieve sense code twice")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/libata-sata.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 1e59e5b6b047..b5aa525d8760 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -1413,7 +1413,8 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
tf->hob_lbah = buf[10];
tf->nsect = buf[12];
tf->hob_nsect = buf[13];
- if (dev->class == ATA_DEV_ZAC && ata_id_has_ncq_autosense(dev->id))
+ if (dev->class == ATA_DEV_ZAC && ata_id_has_ncq_autosense(dev->id) &&
+ (tf->status & ATA_SENSE))
tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
return 0;
@@ -1477,8 +1478,12 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
memcpy(&qc->result_tf, &tf, sizeof(tf));
qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
- if (dev->class == ATA_DEV_ZAC &&
- ((qc->result_tf.status & ATA_SENSE) || qc->result_tf.auxiliary)) {
+
+ /*
+ * If the device supports NCQ autosense, ata_eh_read_log_10h() will have
+ * stored the sense data in qc->result_tf.auxiliary.
+ */
+ if (qc->result_tf.auxiliary) {
char sense_key, asc, ascq;
sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 150/731] ipmi: kcs: Poll OBF briefly to reduce OBE latency
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (148 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 149/731] ata: libata: fix NCQ autosense logic Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 151/731] drm/amdgpu/powerplay/psm: Fix memory leak in power state init Greg Kroah-Hartman
` (591 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrew Jeffery, Joel Stanley,
Corey Minyard, Sasha Levin
From: Andrew Jeffery <andrew@aj.id.au>
[ Upstream commit f90bc0f97f2b65af233a37b2e32fc81871a1e3cf ]
The ASPEED KCS devices don't provide a BMC-side interrupt for the host
reading the output data register (ODR). The act of the host reading ODR
clears the output buffer full (OBF) flag in the status register (STR),
informing the BMC it can transmit a subsequent byte.
On the BMC side the KCS client must enable the OBE event *and* perform a
subsequent read of STR anyway to avoid races - the polling provides a
window for the host to read ODR if data was freshly written while
minimising BMC-side latency.
Fixes: 28651e6c4237 ("ipmi: kcs_bmc: Allow clients to control KCS IRQ state")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20220812144741.240315-1-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/ipmi/kcs_bmc_aspeed.c | 24 +++++++++++++++++++++---
1 file changed, 21 insertions(+), 3 deletions(-)
diff --git a/drivers/char/ipmi/kcs_bmc_aspeed.c b/drivers/char/ipmi/kcs_bmc_aspeed.c
index 92a37b33494c..f23c146bb740 100644
--- a/drivers/char/ipmi/kcs_bmc_aspeed.c
+++ b/drivers/char/ipmi/kcs_bmc_aspeed.c
@@ -404,13 +404,31 @@ static void aspeed_kcs_check_obe(struct timer_list *timer)
static void aspeed_kcs_irq_mask_update(struct kcs_bmc_device *kcs_bmc, u8 mask, u8 state)
{
struct aspeed_kcs_bmc *priv = to_aspeed_kcs_bmc(kcs_bmc);
+ int rc;
+ u8 str;
/* We don't have an OBE IRQ, emulate it */
if (mask & KCS_BMC_EVENT_TYPE_OBE) {
- if (KCS_BMC_EVENT_TYPE_OBE & state)
- mod_timer(&priv->obe.timer, jiffies + OBE_POLL_PERIOD);
- else
+ if (KCS_BMC_EVENT_TYPE_OBE & state) {
+ /*
+ * Given we don't have an OBE IRQ, delay by polling briefly to see if we can
+ * observe such an event before returning to the caller. This is not
+ * incorrect because OBF may have already become clear before enabling the
+ * IRQ if we had one, under which circumstance no event will be propagated
+ * anyway.
+ *
+ * The onus is on the client to perform a race-free check that it hasn't
+ * missed the event.
+ */
+ rc = read_poll_timeout_atomic(aspeed_kcs_inb, str,
+ !(str & KCS_BMC_STR_OBF), 1, 100, false,
+ &priv->kcs_bmc, priv->kcs_bmc.ioreg.str);
+ /* Time for the slow path? */
+ if (rc == -ETIMEDOUT)
+ mod_timer(&priv->obe.timer, jiffies + OBE_POLL_PERIOD);
+ } else {
del_timer(&priv->obe.timer);
+ }
}
if (mask & KCS_BMC_EVENT_TYPE_IBF) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 151/731] drm/amdgpu/powerplay/psm: Fix memory leak in power state init
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (149 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 150/731] ipmi: kcs: Poll OBF briefly to reduce OBE latency Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 152/731] powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G Greg Kroah-Hartman
` (590 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Evan Quan, Rafael Mendonca,
Alex Deucher, Sasha Levin
From: Rafael Mendonca <rafaelmendsr@gmail.com>
[ Upstream commit 8f8033d5663b18e6efb33feb61f2287a04605ab5 ]
Commit 902bc65de0b3 ("drm/amdgpu/powerplay/psm: return an error in power
state init") made the power state init function return early in case of
failure to get an entry from the powerplay table, but it missed to clean up
the allocated memory for the current power state before returning.
Fixes: 902bc65de0b3 ("drm/amdgpu/powerplay/psm: return an error in power state init")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/pm/powerplay/hwmgr/pp_psm.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/pp_psm.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/pp_psm.c
index 67d7da0b6fed..1d829402cd2e 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/pp_psm.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/pp_psm.c
@@ -75,8 +75,10 @@ int psm_init_power_state_table(struct pp_hwmgr *hwmgr)
for (i = 0; i < table_entries; i++) {
result = hwmgr->hwmgr_func->get_pp_table_entry(hwmgr, i, state);
if (result) {
+ kfree(hwmgr->current_ps);
kfree(hwmgr->request_ps);
kfree(hwmgr->ps);
+ hwmgr->current_ps = NULL;
hwmgr->request_ps = NULL;
hwmgr->ps = NULL;
return -EINVAL;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 152/731] powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (150 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 151/731] drm/amdgpu/powerplay/psm: Fix memory leak in power state init Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-29 16:00 ` Sean Anderson
2022-12-28 14:34 ` [PATCH 5.15 153/731] media: v4l2-ctrls: Fix off-by-one error in integer menu control check Greg Kroah-Hartman
` (589 subsequent siblings)
741 siblings, 1 reply; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sean Anderson, David S. Miller, Sasha Levin
From: Sean Anderson <sean.anderson@seco.com>
[ Upstream commit 36926a7d70c2d462fca1ed85bfee000d17fd8662 ]
On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC dtsi
fragments, and mark the QMAN ports as 10G.
Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi | 44 +++++++++++++++++++
.../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi | 44 +++++++++++++++++++
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 4 +-
3 files changed, 90 insertions(+), 2 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
new file mode 100644
index 000000000000..437dab3fc017
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ */
+
+fman@400000 {
+ fman0_rx_0x08: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x88000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa8000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@e0000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy0>;
+ };
+
+ mdio@e1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe1000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */
+
+ pcsphy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
new file mode 100644
index 000000000000..ad116b17850a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ */
+
+fman@400000 {
+ fman0_rx_0x09: port@89000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x89000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x29: port@a9000 {
+ cell-index = <0x29>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa9000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@e2000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy1>;
+ };
+
+ mdio@e3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe3000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */
+
+ pcsphy1: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index ecbb447920bc..74e17e134387 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -609,8 +609,8 @@ usb1: usb@211000 {
/include/ "qoriq-bman1.dtsi"
/include/ "qoriq-fman3-0.dtsi"
-/include/ "qoriq-fman3-0-1g-0.dtsi"
-/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-10g-2.dtsi"
+/include/ "qoriq-fman3-0-10g-3.dtsi"
/include/ "qoriq-fman3-0-1g-2.dtsi"
/include/ "qoriq-fman3-0-1g-3.dtsi"
/include/ "qoriq-fman3-0-1g-4.dtsi"
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 153/731] media: v4l2-ctrls: Fix off-by-one error in integer menu control check
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (151 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 152/731] powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 154/731] media: coda: jpeg: Add check for kmalloc Greg Kroah-Hartman
` (588 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Laurent Pinchart, Sakari Ailus,
Hans Verkuil, Sasha Levin
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[ Upstream commit b6bcdf763db1f5ea602bf876cfe91debfb3c7773 ]
The V4L2 API defines the maximum value for an integer menu control as
the number of elements minus one. The v4l2_ctrl_new_std_menu() validates
this constraint with an off-by-one error. Fix it.
Fixes: d1e9b7c12b74 ("[media] V4L: Add support for integer menu controls with standard menu items")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/v4l2-core/v4l2-ctrls-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/v4l2-core/v4l2-ctrls-core.c b/drivers/media/v4l2-core/v4l2-ctrls-core.c
index 45a76f40deeb..3798a57bbbd4 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls-core.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls-core.c
@@ -1456,7 +1456,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
else if (type == V4L2_CTRL_TYPE_INTEGER_MENU)
qmenu_int = v4l2_ctrl_get_int_menu(id, &qmenu_int_len);
- if ((!qmenu && !qmenu_int) || (qmenu_int && max > qmenu_int_len)) {
+ if ((!qmenu && !qmenu_int) || (qmenu_int && max >= qmenu_int_len)) {
handler_set_err(hdl, -EINVAL);
return NULL;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 154/731] media: coda: jpeg: Add check for kmalloc
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (152 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 153/731] media: v4l2-ctrls: Fix off-by-one error in integer menu control check Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 155/731] media: adv748x: afe: Select input port when initializing AFE Greg Kroah-Hartman
` (587 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Hans Verkuil, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit f30ce3d3760b22ee33c8d9c2e223764ad30bdc5f ]
As kmalloc can return NULL pointer, it should be better to
check the return value and return error, same as
coda_jpeg_decode_header.
Fixes: 96f6f62c4656 ("media: coda: jpeg: add CODA960 JPEG encoder support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/coda/coda-jpeg.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/coda/coda-jpeg.c b/drivers/media/platform/coda/coda-jpeg.c
index a72f4655e5ad..b7bf529f18f7 100644
--- a/drivers/media/platform/coda/coda-jpeg.c
+++ b/drivers/media/platform/coda/coda-jpeg.c
@@ -1052,10 +1052,16 @@ static int coda9_jpeg_start_encoding(struct coda_ctx *ctx)
v4l2_err(&dev->v4l2_dev, "error loading Huffman tables\n");
return ret;
}
- if (!ctx->params.jpeg_qmat_tab[0])
+ if (!ctx->params.jpeg_qmat_tab[0]) {
ctx->params.jpeg_qmat_tab[0] = kmalloc(64, GFP_KERNEL);
- if (!ctx->params.jpeg_qmat_tab[1])
+ if (!ctx->params.jpeg_qmat_tab[0])
+ return -ENOMEM;
+ }
+ if (!ctx->params.jpeg_qmat_tab[1]) {
ctx->params.jpeg_qmat_tab[1] = kmalloc(64, GFP_KERNEL);
+ if (!ctx->params.jpeg_qmat_tab[1])
+ return -ENOMEM;
+ }
coda_set_jpeg_compression_quality(ctx, ctx->params.jpeg_quality);
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 155/731] media: adv748x: afe: Select input port when initializing AFE
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (153 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 154/731] media: coda: jpeg: Add check for kmalloc Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 156/731] media: i2c: ad5820: Fix error path Greg Kroah-Hartman
` (586 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Niklas Söderlund,
Kieran Bingham, Hans Verkuil, Sasha Levin
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[ Upstream commit 23ddb85dafefdace1ad79d1a30b0a4e7c4b5cd8d ]
When moving the input selection to adv748x_reset() it was missed that
during probe the device is reset _before_ the initialization and parsing
of DT by the AFE subdevice. This can lead to the wrong input port (in
case it's not port 0) being selected until the device is reset for the
first time.
Fix this by restoring the call to adv748x_afe_s_input() in the AFE
initialization while also keeping it in the adv748x_reset().
Fixes: c30ed81afe89 ("media: adv748x: afe: Select input port when device is reset")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/adv748x/adv748x-afe.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c
index 02eabe10ab97..00095c7762c2 100644
--- a/drivers/media/i2c/adv748x/adv748x-afe.c
+++ b/drivers/media/i2c/adv748x/adv748x-afe.c
@@ -521,6 +521,10 @@ int adv748x_afe_init(struct adv748x_afe *afe)
}
}
+ adv748x_afe_s_input(afe, afe->input);
+
+ adv_dbg(state, "AFE Default input set to %d\n", afe->input);
+
/* Entity pads and sinks are 0-indexed to match the pads */
for (i = ADV748X_AFE_SINK_AIN0; i <= ADV748X_AFE_SINK_AIN7; i++)
afe->pads[i].flags = MEDIA_PAD_FL_SINK;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 156/731] media: i2c: ad5820: Fix error path
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (154 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 155/731] media: adv748x: afe: Select input port when initializing AFE Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 157/731] venus: pm_helpers: Fix error check in vcodec_domains_get() Greg Kroah-Hartman
` (585 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ricardo Ribalda, Sakari Ailus, Sasha Levin
From: Ricardo Ribalda <ribalda@chromium.org>
[ Upstream commit 9fce241660f37d9e95e93c0ae6fba8cfefa5797b ]
Error path seems to be swaped. Fix the order and provide some meaningful
names.
Fixes: bee3d5115611 ("[media] ad5820: Add driver for auto-focus coil")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/ad5820.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/media/i2c/ad5820.c b/drivers/media/i2c/ad5820.c
index 2958a4694461..07639ecc85aa 100644
--- a/drivers/media/i2c/ad5820.c
+++ b/drivers/media/i2c/ad5820.c
@@ -327,18 +327,18 @@ static int ad5820_probe(struct i2c_client *client,
ret = media_entity_pads_init(&coil->subdev.entity, 0, NULL);
if (ret < 0)
- goto cleanup2;
+ goto clean_mutex;
ret = v4l2_async_register_subdev(&coil->subdev);
if (ret < 0)
- goto cleanup;
+ goto clean_entity;
return ret;
-cleanup2:
- mutex_destroy(&coil->power_lock);
-cleanup:
+clean_entity:
media_entity_cleanup(&coil->subdev.entity);
+clean_mutex:
+ mutex_destroy(&coil->power_lock);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 157/731] venus: pm_helpers: Fix error check in vcodec_domains_get()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (155 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 156/731] media: i2c: ad5820: Fix error path Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 158/731] soreuseport: Fix socket selection for SO_INCOMING_CPU Greg Kroah-Hartman
` (584 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Tang Bin, Sasha Levin
From: Tang Bin <tangbin@cmss.chinamobile.com>
[ Upstream commit 0f6e8d8c94a82e85e1b9b62a7671990740dc6f70 ]
In the function vcodec_domains_get(), dev_pm_domain_attach_by_name()
may return NULL in some cases, so IS_ERR() doesn't meet the
requirements. Thus fix it.
Fixes: 7482a983dea3 ("media: venus: redesign clocks and pm domains control")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/qcom/venus/pm_helpers.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index 03fc82cb3fea..055513a7301f 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -869,8 +869,8 @@ static int vcodec_domains_get(struct venus_core *core)
for (i = 0; i < res->vcodec_pmdomains_num; i++) {
pd = dev_pm_domain_attach_by_name(dev,
res->vcodec_pmdomains[i]);
- if (IS_ERR(pd))
- return PTR_ERR(pd);
+ if (IS_ERR_OR_NULL(pd))
+ return PTR_ERR(pd) ? : -ENODATA;
core->pmdomains[i] = pd;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 158/731] soreuseport: Fix socket selection for SO_INCOMING_CPU.
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (156 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 157/731] venus: pm_helpers: Fix error check in vcodec_domains_get() Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 159/731] media: exynos4-is: dont rely on the v4l2_async_subdev internals Greg Kroah-Hartman
` (583 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kazuho Oku, Kuniyuki Iwashima,
Paolo Abeni, Sasha Levin
From: Kuniyuki Iwashima <kuniyu@amazon.com>
[ Upstream commit b261eda84ec136240a9ca753389853a3a1bccca2 ]
Kazuho Oku reported that setsockopt(SO_INCOMING_CPU) does not work
with setsockopt(SO_REUSEPORT) since v4.6.
With the combination of SO_REUSEPORT and SO_INCOMING_CPU, we could
build a highly efficient server application.
setsockopt(SO_INCOMING_CPU) associates a CPU with a TCP listener
or UDP socket, and then incoming packets processed on the CPU will
likely be distributed to the socket. Technically, a socket could
even receive packets handled on another CPU if no sockets in the
reuseport group have the same CPU receiving the flow.
The logic exists in compute_score() so that a socket will get a higher
score if it has the same CPU with the flow. However, the score gets
ignored after the blamed two commits, which introduced a faster socket
selection algorithm for SO_REUSEPORT.
This patch introduces a counter of sockets with SO_INCOMING_CPU in
a reuseport group to check if we should iterate all sockets to find
a proper one. We increment the counter when
* calling listen() if the socket has SO_INCOMING_CPU and SO_REUSEPORT
* enabling SO_INCOMING_CPU if the socket is in a reuseport group
Also, we decrement it when
* detaching a socket out of the group to apply SO_INCOMING_CPU to
migrated TCP requests
* disabling SO_INCOMING_CPU if the socket is in a reuseport group
When the counter reaches 0, we can get back to the O(1) selection
algorithm.
The overall changes are negligible for the non-SO_INCOMING_CPU case,
and the only notable thing is that we have to update sk_incomnig_cpu
under reuseport_lock. Otherwise, the race prevents transitioning to
the O(n) algorithm and results in the wrong socket selection.
cpu1 (setsockopt) cpu2 (listen)
+-----------------+ +-------------+
lock_sock(sk1) lock_sock(sk2)
reuseport_update_incoming_cpu(sk1, val)
.
| /* set CPU as 0 */
|- WRITE_ONCE(sk1->incoming_cpu, val)
|
| spin_lock_bh(&reuseport_lock)
| reuseport_grow(sk2, reuse)
| .
| |- more_socks_size = reuse->max_socks * 2U;
| |- if (more_socks_size > U16_MAX &&
| | reuse->num_closed_socks)
| | .
| | |- RCU_INIT_POINTER(sk1->sk_reuseport_cb, NULL);
| | `- __reuseport_detach_closed_sock(sk1, reuse)
| | .
| | `- reuseport_put_incoming_cpu(sk1, reuse)
| | .
| | | /* Read shutdown()ed sk1's sk_incoming_cpu
| | | * without lock_sock().
| | | */
| | `- if (sk1->sk_incoming_cpu >= 0)
| | .
| | | /* decrement not-yet-incremented
| | | * count, which is never incremented.
| | | */
| | `- __reuseport_put_incoming_cpu(reuse);
| |
| `- spin_lock_bh(&reuseport_lock)
|
|- spin_lock_bh(&reuseport_lock)
|
|- reuse = rcu_dereference_protected(sk1->sk_reuseport_cb, ...)
|- if (!reuse)
| .
| | /* Cannot increment reuse->incoming_cpu. */
| `- goto out;
|
`- spin_unlock_bh(&reuseport_lock)
Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
Fixes: c125e80b8868 ("soreuseport: fast reuseport TCP socket selection")
Reported-by: Kazuho Oku <kazuhooku@gmail.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/sock_reuseport.h | 2 +
net/core/sock.c | 2 +-
net/core/sock_reuseport.c | 94 ++++++++++++++++++++++++++++++++++--
3 files changed, 92 insertions(+), 6 deletions(-)
diff --git a/include/net/sock_reuseport.h b/include/net/sock_reuseport.h
index efc9085c6892..6ec140b0a61b 100644
--- a/include/net/sock_reuseport.h
+++ b/include/net/sock_reuseport.h
@@ -16,6 +16,7 @@ struct sock_reuseport {
u16 max_socks; /* length of socks */
u16 num_socks; /* elements in socks */
u16 num_closed_socks; /* closed elements in socks */
+ u16 incoming_cpu;
/* The last synq overflow event timestamp of this
* reuse->socks[] group.
*/
@@ -58,5 +59,6 @@ static inline bool reuseport_has_conns(struct sock *sk)
}
void reuseport_has_conns_set(struct sock *sk);
+void reuseport_update_incoming_cpu(struct sock *sk, int val);
#endif /* _SOCK_REUSEPORT_H */
diff --git a/net/core/sock.c b/net/core/sock.c
index 9bcffe1d5332..b7ac53e72d1a 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1302,7 +1302,7 @@ int sock_setsockopt(struct socket *sock, int level, int optname,
break;
}
case SO_INCOMING_CPU:
- WRITE_ONCE(sk->sk_incoming_cpu, val);
+ reuseport_update_incoming_cpu(sk, val);
break;
case SO_CNX_ADVICE:
diff --git a/net/core/sock_reuseport.c b/net/core/sock_reuseport.c
index fb90e1e00773..5a165286e4d8 100644
--- a/net/core/sock_reuseport.c
+++ b/net/core/sock_reuseport.c
@@ -37,6 +37,70 @@ void reuseport_has_conns_set(struct sock *sk)
}
EXPORT_SYMBOL(reuseport_has_conns_set);
+static void __reuseport_get_incoming_cpu(struct sock_reuseport *reuse)
+{
+ /* Paired with READ_ONCE() in reuseport_select_sock_by_hash(). */
+ WRITE_ONCE(reuse->incoming_cpu, reuse->incoming_cpu + 1);
+}
+
+static void __reuseport_put_incoming_cpu(struct sock_reuseport *reuse)
+{
+ /* Paired with READ_ONCE() in reuseport_select_sock_by_hash(). */
+ WRITE_ONCE(reuse->incoming_cpu, reuse->incoming_cpu - 1);
+}
+
+static void reuseport_get_incoming_cpu(struct sock *sk, struct sock_reuseport *reuse)
+{
+ if (sk->sk_incoming_cpu >= 0)
+ __reuseport_get_incoming_cpu(reuse);
+}
+
+static void reuseport_put_incoming_cpu(struct sock *sk, struct sock_reuseport *reuse)
+{
+ if (sk->sk_incoming_cpu >= 0)
+ __reuseport_put_incoming_cpu(reuse);
+}
+
+void reuseport_update_incoming_cpu(struct sock *sk, int val)
+{
+ struct sock_reuseport *reuse;
+ int old_sk_incoming_cpu;
+
+ if (unlikely(!rcu_access_pointer(sk->sk_reuseport_cb))) {
+ /* Paired with REAE_ONCE() in sk_incoming_cpu_update()
+ * and compute_score().
+ */
+ WRITE_ONCE(sk->sk_incoming_cpu, val);
+ return;
+ }
+
+ spin_lock_bh(&reuseport_lock);
+
+ /* This must be done under reuseport_lock to avoid a race with
+ * reuseport_grow(), which accesses sk->sk_incoming_cpu without
+ * lock_sock() when detaching a shutdown()ed sk.
+ *
+ * Paired with READ_ONCE() in reuseport_select_sock_by_hash().
+ */
+ old_sk_incoming_cpu = sk->sk_incoming_cpu;
+ WRITE_ONCE(sk->sk_incoming_cpu, val);
+
+ reuse = rcu_dereference_protected(sk->sk_reuseport_cb,
+ lockdep_is_held(&reuseport_lock));
+
+ /* reuseport_grow() has detached a closed sk. */
+ if (!reuse)
+ goto out;
+
+ if (old_sk_incoming_cpu < 0 && val >= 0)
+ __reuseport_get_incoming_cpu(reuse);
+ else if (old_sk_incoming_cpu >= 0 && val < 0)
+ __reuseport_put_incoming_cpu(reuse);
+
+out:
+ spin_unlock_bh(&reuseport_lock);
+}
+
static int reuseport_sock_index(struct sock *sk,
const struct sock_reuseport *reuse,
bool closed)
@@ -64,6 +128,7 @@ static void __reuseport_add_sock(struct sock *sk,
/* paired with smp_rmb() in reuseport_(select|migrate)_sock() */
smp_wmb();
reuse->num_socks++;
+ reuseport_get_incoming_cpu(sk, reuse);
}
static bool __reuseport_detach_sock(struct sock *sk,
@@ -76,6 +141,7 @@ static bool __reuseport_detach_sock(struct sock *sk,
reuse->socks[i] = reuse->socks[reuse->num_socks - 1];
reuse->num_socks--;
+ reuseport_put_incoming_cpu(sk, reuse);
return true;
}
@@ -86,6 +152,7 @@ static void __reuseport_add_closed_sock(struct sock *sk,
reuse->socks[reuse->max_socks - reuse->num_closed_socks - 1] = sk;
/* paired with READ_ONCE() in inet_csk_bind_conflict() */
WRITE_ONCE(reuse->num_closed_socks, reuse->num_closed_socks + 1);
+ reuseport_get_incoming_cpu(sk, reuse);
}
static bool __reuseport_detach_closed_sock(struct sock *sk,
@@ -99,6 +166,7 @@ static bool __reuseport_detach_closed_sock(struct sock *sk,
reuse->socks[i] = reuse->socks[reuse->max_socks - reuse->num_closed_socks];
/* paired with READ_ONCE() in inet_csk_bind_conflict() */
WRITE_ONCE(reuse->num_closed_socks, reuse->num_closed_socks - 1);
+ reuseport_put_incoming_cpu(sk, reuse);
return true;
}
@@ -166,6 +234,7 @@ int reuseport_alloc(struct sock *sk, bool bind_inany)
reuse->bind_inany = bind_inany;
reuse->socks[0] = sk;
reuse->num_socks = 1;
+ reuseport_get_incoming_cpu(sk, reuse);
rcu_assign_pointer(sk->sk_reuseport_cb, reuse);
out:
@@ -209,6 +278,7 @@ static struct sock_reuseport *reuseport_grow(struct sock_reuseport *reuse)
more_reuse->reuseport_id = reuse->reuseport_id;
more_reuse->bind_inany = reuse->bind_inany;
more_reuse->has_conns = reuse->has_conns;
+ more_reuse->incoming_cpu = reuse->incoming_cpu;
memcpy(more_reuse->socks, reuse->socks,
reuse->num_socks * sizeof(struct sock *));
@@ -458,18 +528,32 @@ static struct sock *run_bpf_filter(struct sock_reuseport *reuse, u16 socks,
static struct sock *reuseport_select_sock_by_hash(struct sock_reuseport *reuse,
u32 hash, u16 num_socks)
{
+ struct sock *first_valid_sk = NULL;
int i, j;
i = j = reciprocal_scale(hash, num_socks);
- while (reuse->socks[i]->sk_state == TCP_ESTABLISHED) {
+ do {
+ struct sock *sk = reuse->socks[i];
+
+ if (sk->sk_state != TCP_ESTABLISHED) {
+ /* Paired with WRITE_ONCE() in __reuseport_(get|put)_incoming_cpu(). */
+ if (!READ_ONCE(reuse->incoming_cpu))
+ return sk;
+
+ /* Paired with WRITE_ONCE() in reuseport_update_incoming_cpu(). */
+ if (READ_ONCE(sk->sk_incoming_cpu) == raw_smp_processor_id())
+ return sk;
+
+ if (!first_valid_sk)
+ first_valid_sk = sk;
+ }
+
i++;
if (i >= num_socks)
i = 0;
- if (i == j)
- return NULL;
- }
+ } while (i != j);
- return reuse->socks[i];
+ return first_valid_sk;
}
/**
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 159/731] media: exynos4-is: dont rely on the v4l2_async_subdev internals
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (157 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 158/731] soreuseport: Fix socket selection for SO_INCOMING_CPU Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 160/731] libbpf: Btf dedup identical struct test needs check for nested structs/arrays Greg Kroah-Hartman
` (582 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Daniel Scally, Marek Szyprowski,
Sakari Ailus, Sasha Levin
From: Marek Szyprowski <m.szyprowski@samsung.com>
[ Upstream commit f98a5c2e1c4396488c27274ba82afc11725a4bcc ]
Commit 1f391df44607 ("media: v4l2-async: Use endpoints in
__v4l2_async_nf_add_fwnode_remote()") changed the data that is stored in
the v4l2_async_subdev internals from the fwnode pointer to the parent
device to the fwnode pointer to the matched endpoint. This broke the
sensor matching code, which relied on the particular fwnode data in the
v4l2_async_subdev internals. Fix this by simply matching the
v4l2_async_subdev pointer, which is already available there.
Reported-by: Daniel Scally <djrscally@gmail.com>
Fixes: fa91f1056f17 ("[media] exynos4-is: Add support for asynchronous subdevices registration")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/exynos4-is/media-dev.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index fa648721eaab..aa5982e32b2b 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -1380,9 +1380,7 @@ static int subdev_notifier_bound(struct v4l2_async_notifier *notifier,
/* Find platform data for this sensor subdev */
for (i = 0; i < ARRAY_SIZE(fmd->sensor); i++)
- if (fmd->sensor[i].asd &&
- fmd->sensor[i].asd->match.fwnode ==
- of_fwnode_handle(subdev->dev->of_node))
+ if (fmd->sensor[i].asd == asd)
si = &fmd->sensor[i];
if (si == NULL)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 160/731] libbpf: Btf dedup identical struct test needs check for nested structs/arrays
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (158 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 159/731] media: exynos4-is: dont rely on the v4l2_async_subdev internals Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 161/731] can: kvaser_usb: do not increase tx statistics when sending error message frames Greg Kroah-Hartman
` (581 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alan Maguire, Andrii Nakryiko, Sasha Levin
From: Alan Maguire <alan.maguire@oracle.com>
[ Upstream commit f3c51fe02c55bd944662714e5b91b96dc271ad9f ]
When examining module BTF, it is common to see core kernel structures
such as sk_buff, net_device duplicated in the module. After adding
debug messaging to BTF it turned out that much of the problem
was down to the identical struct test failing during deduplication;
sometimes the compiler adds identical structs. However
it turns out sometimes that type ids of identical struct members
can also differ, even when the containing structs are still identical.
To take an example, for struct sk_buff, debug messaging revealed
that the identical struct matching was failing for the anon
struct "headers"; specifically for the first field:
__u8 __pkt_type_offset[0]; /* 128 0 */
Looking at the code in BTF deduplication, we have code that guards
against the possibility of identical struct definitions, down to
type ids, and identical array definitions. However in this case
we have a struct which is being defined twice but does not have
identical type ids since each duplicate struct has separate type
ids for the above array member. A similar problem (though not
observed) could occur for struct-in-struct.
The solution is to make the "identical struct" test check members
not just for matching ids, but to also check if they in turn are
identical structs or arrays.
The results of doing this are quite dramatic (for some modules
at least); I see the number of type ids drop from around 10000
to just over 1000 in one module for example.
For testing use latest pahole or apply [1], otherwise dedups
can fail for the reasons described there.
Also fix return type of btf_dedup_identical_arrays() as
suggested by Andrii to match boolean return type used
elsewhere.
Fixes: efdd3eb8015e ("libbpf: Accommodate DWARF/compiler bug with duplicated structs")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1666622309-22289-1-git-send-email-alan.maguire@oracle.com
[1] https://lore.kernel.org/bpf/1666364523-9648-1-git-send-email-alan.maguire
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/btf.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c
index 5f3d20ae66d5..3ed759f53e7c 100644
--- a/tools/lib/bpf/btf.c
+++ b/tools/lib/bpf/btf.c
@@ -3718,14 +3718,14 @@ static inline __u16 btf_fwd_kind(struct btf_type *t)
}
/* Check if given two types are identical ARRAY definitions */
-static int btf_dedup_identical_arrays(struct btf_dedup *d, __u32 id1, __u32 id2)
+static bool btf_dedup_identical_arrays(struct btf_dedup *d, __u32 id1, __u32 id2)
{
struct btf_type *t1, *t2;
t1 = btf_type_by_id(d->btf, id1);
t2 = btf_type_by_id(d->btf, id2);
if (!btf_is_array(t1) || !btf_is_array(t2))
- return 0;
+ return false;
return btf_equal_array(t1, t2);
}
@@ -3749,7 +3749,9 @@ static bool btf_dedup_identical_structs(struct btf_dedup *d, __u32 id1, __u32 id
m1 = btf_members(t1);
m2 = btf_members(t2);
for (i = 0, n = btf_vlen(t1); i < n; i++, m1++, m2++) {
- if (m1->type != m2->type)
+ if (m1->type != m2->type &&
+ !btf_dedup_identical_arrays(d, m1->type, m2->type) &&
+ !btf_dedup_identical_structs(d, m1->type, m2->type))
return false;
}
return true;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 161/731] can: kvaser_usb: do not increase tx statistics when sending error message frames
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (159 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 160/731] libbpf: Btf dedup identical struct test needs check for nested structs/arrays Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 162/731] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device Greg Kroah-Hartman
` (580 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jimmy Assarsson, Vincent Mailhol,
Marc Kleine-Budde, Sasha Levin
From: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
[ Upstream commit 0b0ce2c67795672115ac6ca28351a78799cd114b ]
The CAN error message frames (i.e. error skb) are an interface
specific to socket CAN. The payload of the CAN error message frames
does not correspond to any actual data sent on the wire. Only an error
flag and a delimiter are transmitted when an error occurs (c.f. ISO
11898-1 section 10.4.4.2 "Error flag").
For this reason, it makes no sense to increment the tx_packets and
tx_bytes fields of struct net_device_stats when sending an error
message frame because no actual payload will be transmitted on the
wire.
N.B. Sending error message frames is a very specific feature which, at
the moment, is only supported by the Kvaser Hydra hardware. Please
refer to [1] for more details on the topic.
[1] https://lore.kernel.org/linux-can/CAMZ6RqK0rTNg3u3mBpZOoY51jLZ-et-J01tY6-+mWsM4meVw-A@mail.gmail.com/t/#u
Link: https://lore.kernel.org/all/20211207121531.42941-3-mailhol.vincent@wanadoo.fr
Co-developed-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of: 35364f5b41a4 ("can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
index 3ff2cd9828d2..215f2b48db24 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
@@ -295,6 +295,7 @@ struct kvaser_cmd {
#define KVASER_USB_HYDRA_CF_FLAG_OVERRUN BIT(1)
#define KVASER_USB_HYDRA_CF_FLAG_REMOTE_FRAME BIT(4)
#define KVASER_USB_HYDRA_CF_FLAG_EXTENDED_ID BIT(5)
+#define KVASER_USB_HYDRA_CF_FLAG_TX_ACK BIT(6)
/* CAN frame flags. Used in ext_rx_can and ext_tx_can */
#define KVASER_USB_HYDRA_CF_FLAG_OSM_NACK BIT(12)
#define KVASER_USB_HYDRA_CF_FLAG_ABL BIT(13)
@@ -1125,6 +1126,7 @@ static void kvaser_usb_hydra_tx_acknowledge(const struct kvaser_usb *dev,
struct kvaser_usb_net_priv *priv;
unsigned long irq_flags;
bool one_shot_fail = false;
+ bool is_err_frame = false;
u16 transid = kvaser_usb_hydra_get_cmd_transid(cmd);
priv = kvaser_usb_hydra_net_priv_from_cmd(dev, cmd);
@@ -1143,10 +1145,13 @@ static void kvaser_usb_hydra_tx_acknowledge(const struct kvaser_usb *dev,
kvaser_usb_hydra_one_shot_fail(priv, cmd_ext);
one_shot_fail = true;
}
+
+ is_err_frame = flags & KVASER_USB_HYDRA_CF_FLAG_TX_ACK &&
+ flags & KVASER_USB_HYDRA_CF_FLAG_ERROR_FRAME;
}
context = &priv->tx_contexts[transid % dev->max_tx_urbs];
- if (!one_shot_fail) {
+ if (!one_shot_fail && !is_err_frame) {
struct net_device_stats *stats = &priv->netdev->stats;
stats->tx_packets++;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 162/731] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (160 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 161/731] can: kvaser_usb: do not increase tx statistics when sending error message frames Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 163/731] can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event Greg Kroah-Hartman
` (579 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Anssi Hannula, Jimmy Assarsson,
Marc Kleine-Budde, Sasha Levin
From: Jimmy Assarsson <extja@kvaser.com>
[ Upstream commit 35364f5b41a4917fe94a3f393d149b63ec583297 ]
Use the CMD_GET_CAPABILITIES_REQ command to query the device for certain
capabilities. We are only interested in LISTENONLY mode and wither the
device reports CAN error counters.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Reported-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 144 +++++++++++++++++-
1 file changed, 143 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 7a71097281c2..6c7ee1f0a9d9 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -73,6 +73,8 @@
#define CMD_TX_ACKNOWLEDGE 50
#define CMD_CAN_ERROR_EVENT 51
#define CMD_FLUSH_QUEUE_REPLY 68
+#define CMD_GET_CAPABILITIES_REQ 95
+#define CMD_GET_CAPABILITIES_RESP 96
#define CMD_LEAF_LOG_MESSAGE 106
@@ -82,6 +84,8 @@
#define KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK BIT(5)
#define KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK BIT(6)
+#define KVASER_USB_LEAF_SWOPTION_EXT_CAP BIT(12)
+
/* error factors */
#define M16C_EF_ACKE BIT(0)
#define M16C_EF_CRCE BIT(1)
@@ -277,6 +281,28 @@ struct leaf_cmd_log_message {
u8 data[8];
} __packed;
+/* Sub commands for cap_req and cap_res */
+#define KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE 0x02
+#define KVASER_USB_LEAF_CAP_CMD_ERR_REPORT 0x05
+struct kvaser_cmd_cap_req {
+ __le16 padding0;
+ __le16 cap_cmd;
+ __le16 padding1;
+ __le16 channel;
+} __packed;
+
+/* Status codes for cap_res */
+#define KVASER_USB_LEAF_CAP_STAT_OK 0x00
+#define KVASER_USB_LEAF_CAP_STAT_NOT_IMPL 0x01
+#define KVASER_USB_LEAF_CAP_STAT_UNAVAIL 0x02
+struct kvaser_cmd_cap_res {
+ __le16 padding;
+ __le16 cap_cmd;
+ __le16 status;
+ __le32 mask;
+ __le32 value;
+} __packed;
+
struct kvaser_cmd {
u8 len;
u8 id;
@@ -294,6 +320,8 @@ struct kvaser_cmd {
struct leaf_cmd_chip_state_event chip_state_event;
struct leaf_cmd_error_event error_event;
struct leaf_cmd_log_message log_message;
+ struct kvaser_cmd_cap_req cap_req;
+ struct kvaser_cmd_cap_res cap_res;
} __packed leaf;
union {
@@ -323,6 +351,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_leaf[] = {
[CMD_LEAF_LOG_MESSAGE] = kvaser_fsize(u.leaf.log_message),
[CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.leaf.chip_state_event),
[CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.leaf.error_event),
+ [CMD_GET_CAPABILITIES_RESP] = kvaser_fsize(u.leaf.cap_res),
/* ignored events: */
[CMD_FLUSH_QUEUE_REPLY] = CMD_SIZE_ANY,
};
@@ -607,6 +636,9 @@ static void kvaser_usb_leaf_get_software_info_leaf(struct kvaser_usb *dev,
dev->fw_version = le32_to_cpu(softinfo->fw_version);
dev->max_tx_urbs = le16_to_cpu(softinfo->max_outstanding_tx);
+ if (sw_options & KVASER_USB_LEAF_SWOPTION_EXT_CAP)
+ dev->card_data.capabilities |= KVASER_USB_CAP_EXT_CAP;
+
if (dev->driver_info->quirks & KVASER_USB_QUIRK_IGNORE_CLK_FREQ) {
/* Firmware expects bittiming parameters calculated for 16MHz
* clock, regardless of the actual clock
@@ -694,6 +726,116 @@ static int kvaser_usb_leaf_get_card_info(struct kvaser_usb *dev)
return 0;
}
+static int kvaser_usb_leaf_get_single_capability(struct kvaser_usb *dev,
+ u16 cap_cmd_req, u16 *status)
+{
+ struct kvaser_usb_dev_card_data *card_data = &dev->card_data;
+ struct kvaser_cmd *cmd;
+ u32 value = 0;
+ u32 mask = 0;
+ u16 cap_cmd_res;
+ int err;
+ int i;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd)
+ return -ENOMEM;
+
+ cmd->id = CMD_GET_CAPABILITIES_REQ;
+ cmd->u.leaf.cap_req.cap_cmd = cpu_to_le16(cap_cmd_req);
+ cmd->len = CMD_HEADER_LEN + sizeof(struct kvaser_cmd_cap_req);
+
+ err = kvaser_usb_send_cmd(dev, cmd, cmd->len);
+ if (err)
+ goto end;
+
+ err = kvaser_usb_leaf_wait_cmd(dev, CMD_GET_CAPABILITIES_RESP, cmd);
+ if (err)
+ goto end;
+
+ *status = le16_to_cpu(cmd->u.leaf.cap_res.status);
+
+ if (*status != KVASER_USB_LEAF_CAP_STAT_OK)
+ goto end;
+
+ cap_cmd_res = le16_to_cpu(cmd->u.leaf.cap_res.cap_cmd);
+ switch (cap_cmd_res) {
+ case KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE:
+ case KVASER_USB_LEAF_CAP_CMD_ERR_REPORT:
+ value = le32_to_cpu(cmd->u.leaf.cap_res.value);
+ mask = le32_to_cpu(cmd->u.leaf.cap_res.mask);
+ break;
+ default:
+ dev_warn(&dev->intf->dev, "Unknown capability command %u\n",
+ cap_cmd_res);
+ break;
+ }
+
+ for (i = 0; i < dev->nchannels; i++) {
+ if (BIT(i) & (value & mask)) {
+ switch (cap_cmd_res) {
+ case KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE:
+ card_data->ctrlmode_supported |=
+ CAN_CTRLMODE_LISTENONLY;
+ break;
+ case KVASER_USB_LEAF_CAP_CMD_ERR_REPORT:
+ card_data->capabilities |=
+ KVASER_USB_CAP_BERR_CAP;
+ break;
+ }
+ }
+ }
+
+end:
+ kfree(cmd);
+
+ return err;
+}
+
+static int kvaser_usb_leaf_get_capabilities_leaf(struct kvaser_usb *dev)
+{
+ int err;
+ u16 status;
+
+ if (!(dev->card_data.capabilities & KVASER_USB_CAP_EXT_CAP)) {
+ dev_info(&dev->intf->dev,
+ "No extended capability support. Upgrade device firmware.\n");
+ return 0;
+ }
+
+ err = kvaser_usb_leaf_get_single_capability(dev,
+ KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE,
+ &status);
+ if (err)
+ return err;
+ if (status)
+ dev_info(&dev->intf->dev,
+ "KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE failed %u\n",
+ status);
+
+ err = kvaser_usb_leaf_get_single_capability(dev,
+ KVASER_USB_LEAF_CAP_CMD_ERR_REPORT,
+ &status);
+ if (err)
+ return err;
+ if (status)
+ dev_info(&dev->intf->dev,
+ "KVASER_USB_LEAF_CAP_CMD_ERR_REPORT failed %u\n",
+ status);
+
+ return 0;
+}
+
+static int kvaser_usb_leaf_get_capabilities(struct kvaser_usb *dev)
+{
+ int err = 0;
+
+ if (dev->driver_info->family == KVASER_LEAF)
+ err = kvaser_usb_leaf_get_capabilities_leaf(dev);
+
+ return err;
+}
+
static void kvaser_usb_leaf_tx_acknowledge(const struct kvaser_usb *dev,
const struct kvaser_cmd *cmd)
{
@@ -1490,7 +1632,7 @@ const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops = {
.dev_get_software_info = kvaser_usb_leaf_get_software_info,
.dev_get_software_details = NULL,
.dev_get_card_info = kvaser_usb_leaf_get_card_info,
- .dev_get_capabilities = NULL,
+ .dev_get_capabilities = kvaser_usb_leaf_get_capabilities,
.dev_set_opt_mode = kvaser_usb_leaf_set_opt_mode,
.dev_start_chip = kvaser_usb_leaf_start_chip,
.dev_stop_chip = kvaser_usb_leaf_stop_chip,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 163/731] can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (161 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 162/731] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 164/731] can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT Greg Kroah-Hartman
` (578 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Anssi Hannula, Jimmy Assarsson,
Marc Kleine-Budde, Sasha Levin
From: Jimmy Assarsson <extja@kvaser.com>
[ Upstream commit 7ea56128dbf904a3359bcf9289cccdfa3c85c7e8 ]
Prepare for handling CMD_ERROR_EVENT. Rename struct
{leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Reported-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 38 +++++++++----------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 6c7ee1f0a9d9..d6553d9ee958 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -233,7 +233,7 @@ struct kvaser_cmd_tx_acknowledge_header {
u8 tid;
} __packed;
-struct leaf_cmd_error_event {
+struct leaf_cmd_can_error_event {
u8 tid;
u8 flags;
__le16 time[3];
@@ -245,7 +245,7 @@ struct leaf_cmd_error_event {
u8 error_factor;
} __packed;
-struct usbcan_cmd_error_event {
+struct usbcan_cmd_can_error_event {
u8 tid;
u8 padding;
u8 tx_errors_count_ch0;
@@ -318,7 +318,7 @@ struct kvaser_cmd {
struct leaf_cmd_softinfo softinfo;
struct leaf_cmd_rx_can rx_can;
struct leaf_cmd_chip_state_event chip_state_event;
- struct leaf_cmd_error_event error_event;
+ struct leaf_cmd_can_error_event can_error_event;
struct leaf_cmd_log_message log_message;
struct kvaser_cmd_cap_req cap_req;
struct kvaser_cmd_cap_res cap_res;
@@ -328,7 +328,7 @@ struct kvaser_cmd {
struct usbcan_cmd_softinfo softinfo;
struct usbcan_cmd_rx_can rx_can;
struct usbcan_cmd_chip_state_event chip_state_event;
- struct usbcan_cmd_error_event error_event;
+ struct usbcan_cmd_can_error_event can_error_event;
} __packed usbcan;
struct kvaser_cmd_tx_can tx_can;
@@ -350,7 +350,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_leaf[] = {
[CMD_RX_EXT_MESSAGE] = kvaser_fsize(u.leaf.rx_can),
[CMD_LEAF_LOG_MESSAGE] = kvaser_fsize(u.leaf.log_message),
[CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.leaf.chip_state_event),
- [CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.leaf.error_event),
+ [CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.leaf.can_error_event),
[CMD_GET_CAPABILITIES_RESP] = kvaser_fsize(u.leaf.cap_res),
/* ignored events: */
[CMD_FLUSH_QUEUE_REPLY] = CMD_SIZE_ANY,
@@ -365,7 +365,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_usbcan[] = {
[CMD_RX_STD_MESSAGE] = kvaser_fsize(u.usbcan.rx_can),
[CMD_RX_EXT_MESSAGE] = kvaser_fsize(u.usbcan.rx_can),
[CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.usbcan.chip_state_event),
- [CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.usbcan.error_event),
+ [CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.usbcan.can_error_event),
/* ignored events: */
[CMD_USBCAN_CLOCK_OVERFLOW_EVENT] = CMD_SIZE_ANY,
};
@@ -1137,11 +1137,11 @@ static void kvaser_usb_leaf_usbcan_rx_error(const struct kvaser_usb *dev,
case CMD_CAN_ERROR_EVENT:
es.channel = 0;
- es.status = cmd->u.usbcan.error_event.status_ch0;
- es.txerr = cmd->u.usbcan.error_event.tx_errors_count_ch0;
- es.rxerr = cmd->u.usbcan.error_event.rx_errors_count_ch0;
+ es.status = cmd->u.usbcan.can_error_event.status_ch0;
+ es.txerr = cmd->u.usbcan.can_error_event.tx_errors_count_ch0;
+ es.rxerr = cmd->u.usbcan.can_error_event.rx_errors_count_ch0;
es.usbcan.other_ch_status =
- cmd->u.usbcan.error_event.status_ch1;
+ cmd->u.usbcan.can_error_event.status_ch1;
kvaser_usb_leaf_usbcan_conditionally_rx_error(dev, &es);
/* The USBCAN firmware supports up to 2 channels.
@@ -1149,13 +1149,13 @@ static void kvaser_usb_leaf_usbcan_rx_error(const struct kvaser_usb *dev,
*/
if (dev->nchannels == MAX_USBCAN_NET_DEVICES) {
es.channel = 1;
- es.status = cmd->u.usbcan.error_event.status_ch1;
+ es.status = cmd->u.usbcan.can_error_event.status_ch1;
es.txerr =
- cmd->u.usbcan.error_event.tx_errors_count_ch1;
+ cmd->u.usbcan.can_error_event.tx_errors_count_ch1;
es.rxerr =
- cmd->u.usbcan.error_event.rx_errors_count_ch1;
+ cmd->u.usbcan.can_error_event.rx_errors_count_ch1;
es.usbcan.other_ch_status =
- cmd->u.usbcan.error_event.status_ch0;
+ cmd->u.usbcan.can_error_event.status_ch0;
kvaser_usb_leaf_usbcan_conditionally_rx_error(dev, &es);
}
break;
@@ -1172,11 +1172,11 @@ static void kvaser_usb_leaf_leaf_rx_error(const struct kvaser_usb *dev,
switch (cmd->id) {
case CMD_CAN_ERROR_EVENT:
- es.channel = cmd->u.leaf.error_event.channel;
- es.status = cmd->u.leaf.error_event.status;
- es.txerr = cmd->u.leaf.error_event.tx_errors_count;
- es.rxerr = cmd->u.leaf.error_event.rx_errors_count;
- es.leaf.error_factor = cmd->u.leaf.error_event.error_factor;
+ es.channel = cmd->u.leaf.can_error_event.channel;
+ es.status = cmd->u.leaf.can_error_event.status;
+ es.txerr = cmd->u.leaf.can_error_event.tx_errors_count;
+ es.rxerr = cmd->u.leaf.can_error_event.rx_errors_count;
+ es.leaf.error_factor = cmd->u.leaf.can_error_event.error_factor;
break;
case CMD_LEAF_LOG_MESSAGE:
es.channel = cmd->u.leaf.log_message.channel;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 164/731] can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (162 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 163/731] can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 165/731] can: kvaser_usb_leaf: Set Warning state even without bus errors Greg Kroah-Hartman
` (577 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Anssi Hannula, Jimmy Assarsson,
Marc Kleine-Budde, Sasha Levin
From: Jimmy Assarsson <extja@kvaser.com>
[ Upstream commit b24cb2d169e0c9dce664a959e1f2aa9781285dc9 ]
The device will send an error event command, to indicate certain errors.
This indicates a misbehaving driver, and should never occur.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Co-developed-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 99 +++++++++++++++++++
1 file changed, 99 insertions(+)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index d6553d9ee958..a59cb4ea5456 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -69,6 +69,7 @@
#define CMD_GET_CARD_INFO_REPLY 35
#define CMD_GET_SOFTWARE_INFO 38
#define CMD_GET_SOFTWARE_INFO_REPLY 39
+#define CMD_ERROR_EVENT 45
#define CMD_FLUSH_QUEUE 48
#define CMD_TX_ACKNOWLEDGE 50
#define CMD_CAN_ERROR_EVENT 51
@@ -257,6 +258,28 @@ struct usbcan_cmd_can_error_event {
__le16 time;
} __packed;
+/* CMD_ERROR_EVENT error codes */
+#define KVASER_USB_LEAF_ERROR_EVENT_TX_QUEUE_FULL 0x8
+#define KVASER_USB_LEAF_ERROR_EVENT_PARAM 0x9
+
+struct leaf_cmd_error_event {
+ u8 tid;
+ u8 error_code;
+ __le16 timestamp[3];
+ __le16 padding;
+ __le16 info1;
+ __le16 info2;
+} __packed;
+
+struct usbcan_cmd_error_event {
+ u8 tid;
+ u8 error_code;
+ __le16 info1;
+ __le16 info2;
+ __le16 timestamp;
+ __le16 padding;
+} __packed;
+
struct kvaser_cmd_ctrl_mode {
u8 tid;
u8 channel;
@@ -320,6 +343,7 @@ struct kvaser_cmd {
struct leaf_cmd_chip_state_event chip_state_event;
struct leaf_cmd_can_error_event can_error_event;
struct leaf_cmd_log_message log_message;
+ struct leaf_cmd_error_event error_event;
struct kvaser_cmd_cap_req cap_req;
struct kvaser_cmd_cap_res cap_res;
} __packed leaf;
@@ -329,6 +353,7 @@ struct kvaser_cmd {
struct usbcan_cmd_rx_can rx_can;
struct usbcan_cmd_chip_state_event chip_state_event;
struct usbcan_cmd_can_error_event can_error_event;
+ struct usbcan_cmd_error_event error_event;
} __packed usbcan;
struct kvaser_cmd_tx_can tx_can;
@@ -352,6 +377,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_leaf[] = {
[CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.leaf.chip_state_event),
[CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.leaf.can_error_event),
[CMD_GET_CAPABILITIES_RESP] = kvaser_fsize(u.leaf.cap_res),
+ [CMD_ERROR_EVENT] = kvaser_fsize(u.leaf.error_event),
/* ignored events: */
[CMD_FLUSH_QUEUE_REPLY] = CMD_SIZE_ANY,
};
@@ -366,6 +392,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_usbcan[] = {
[CMD_RX_EXT_MESSAGE] = kvaser_fsize(u.usbcan.rx_can),
[CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.usbcan.chip_state_event),
[CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.usbcan.can_error_event),
+ [CMD_ERROR_EVENT] = kvaser_fsize(u.usbcan.error_event),
/* ignored events: */
[CMD_USBCAN_CLOCK_OVERFLOW_EVENT] = CMD_SIZE_ANY,
};
@@ -1308,6 +1335,74 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev,
netif_rx(skb);
}
+static void kvaser_usb_leaf_error_event_parameter(const struct kvaser_usb *dev,
+ const struct kvaser_cmd *cmd)
+{
+ u16 info1 = 0;
+
+ switch (dev->driver_info->family) {
+ case KVASER_LEAF:
+ info1 = le16_to_cpu(cmd->u.leaf.error_event.info1);
+ break;
+ case KVASER_USBCAN:
+ info1 = le16_to_cpu(cmd->u.usbcan.error_event.info1);
+ break;
+ }
+
+ /* info1 will contain the offending cmd_no */
+ switch (info1) {
+ case CMD_SET_CTRL_MODE:
+ dev_warn(&dev->intf->dev,
+ "CMD_SET_CTRL_MODE error in parameter\n");
+ break;
+
+ case CMD_SET_BUS_PARAMS:
+ dev_warn(&dev->intf->dev,
+ "CMD_SET_BUS_PARAMS error in parameter\n");
+ break;
+
+ default:
+ dev_warn(&dev->intf->dev,
+ "Unhandled parameter error event cmd_no (%u)\n",
+ info1);
+ break;
+ }
+}
+
+static void kvaser_usb_leaf_error_event(const struct kvaser_usb *dev,
+ const struct kvaser_cmd *cmd)
+{
+ u8 error_code = 0;
+
+ switch (dev->driver_info->family) {
+ case KVASER_LEAF:
+ error_code = cmd->u.leaf.error_event.error_code;
+ break;
+ case KVASER_USBCAN:
+ error_code = cmd->u.usbcan.error_event.error_code;
+ break;
+ }
+
+ switch (error_code) {
+ case KVASER_USB_LEAF_ERROR_EVENT_TX_QUEUE_FULL:
+ /* Received additional CAN message, when firmware TX queue is
+ * already full. Something is wrong with the driver.
+ * This should never happen!
+ */
+ dev_err(&dev->intf->dev,
+ "Received error event TX_QUEUE_FULL\n");
+ break;
+ case KVASER_USB_LEAF_ERROR_EVENT_PARAM:
+ kvaser_usb_leaf_error_event_parameter(dev, cmd);
+ break;
+
+ default:
+ dev_warn(&dev->intf->dev,
+ "Unhandled error event (%d)\n", error_code);
+ break;
+ }
+}
+
static void kvaser_usb_leaf_start_chip_reply(const struct kvaser_usb *dev,
const struct kvaser_cmd *cmd)
{
@@ -1386,6 +1481,10 @@ static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev,
kvaser_usb_leaf_tx_acknowledge(dev, cmd);
break;
+ case CMD_ERROR_EVENT:
+ kvaser_usb_leaf_error_event(dev, cmd);
+ break;
+
/* Ignored commands */
case CMD_USBCAN_CLOCK_OVERFLOW_EVENT:
if (dev->driver_info->family != KVASER_USBCAN)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 165/731] can: kvaser_usb_leaf: Set Warning state even without bus errors
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (163 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 164/731] can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 166/731] can: kvaser_usb: make use of units.h in assignment of frequency Greg Kroah-Hartman
` (576 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jimmy Assarsson, Anssi Hannula,
Marc Kleine-Budde, Sasha Levin
From: Anssi Hannula <anssi.hannula@bitwise.fi>
[ Upstream commit df1b7af2761b935f63b4a53e789d41ed859edf61 ]
kvaser_usb_leaf_rx_error_update_can_state() sets error state according
to error counters when the hardware does not indicate a specific state
directly.
However, this is currently gated behind a check for
M16C_STATE_BUS_ERROR which does not always seem to be set when error
counters are increasing, and may not be set when error counters are
decreasing.
This causes the CAN_STATE_ERROR_WARNING state to not be set in some
cases even when appropriate.
Change the code to set error state from counters even without
M16C_STATE_BUS_ERROR.
The Error-Passive case seems superfluous as it is already set via
M16C_STATE_BUS_PASSIVE flag above, but it is kept for now.
Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-6-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 20 ++++++++-----------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index a59cb4ea5456..a653318f583a 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -965,20 +965,16 @@ kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
new_state = CAN_STATE_BUS_OFF;
} else if (es->status & M16C_STATE_BUS_PASSIVE) {
new_state = CAN_STATE_ERROR_PASSIVE;
- } else if (es->status & M16C_STATE_BUS_ERROR) {
+ } else if ((es->status & M16C_STATE_BUS_ERROR) &&
+ cur_state >= CAN_STATE_BUS_OFF) {
/* Guard against spurious error events after a busoff */
- if (cur_state < CAN_STATE_BUS_OFF) {
- if (es->txerr >= 128 || es->rxerr >= 128)
- new_state = CAN_STATE_ERROR_PASSIVE;
- else if (es->txerr >= 96 || es->rxerr >= 96)
- new_state = CAN_STATE_ERROR_WARNING;
- else if (cur_state > CAN_STATE_ERROR_ACTIVE)
- new_state = CAN_STATE_ERROR_ACTIVE;
- }
- }
-
- if (!es->status)
+ } else if (es->txerr >= 128 || es->rxerr >= 128) {
+ new_state = CAN_STATE_ERROR_PASSIVE;
+ } else if (es->txerr >= 96 || es->rxerr >= 96) {
+ new_state = CAN_STATE_ERROR_WARNING;
+ } else {
new_state = CAN_STATE_ERROR_ACTIVE;
+ }
if (new_state != cur_state) {
tx_state = (es->txerr >= es->rxerr) ? new_state : 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 166/731] can: kvaser_usb: make use of units.h in assignment of frequency
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (164 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 165/731] can: kvaser_usb_leaf: Set Warning state even without bus errors Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 167/731] can: kvaser_usb_leaf: Fix improved state not being reported Greg Kroah-Hartman
` (575 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jimmy Assarsson, Marc Kleine-Budde,
Sasha Levin
From: Jimmy Assarsson <extja@kvaser.com>
[ Upstream commit b8f91799687eeb6ffe73b66420db46d8c0292295 ]
Use the MEGA define plus the comment /* Hz */ when assigning
frequencies.
Link: https://lore.kernel.org/all/20211210075803.343841-1-mkl@pengutronix.de
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of: 8d21f5927ae6 ("can: kvaser_usb_leaf: Fix improved state not being reported")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 7 ++++---
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 9 +++++----
2 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
index 215f2b48db24..b485f0bc2e6b 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
@@ -22,6 +22,7 @@
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/types.h>
+#include <linux/units.h>
#include <linux/usb.h>
#include <linux/can.h>
@@ -2049,7 +2050,7 @@ const struct kvaser_usb_dev_ops kvaser_usb_hydra_dev_ops = {
static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_kcan = {
.clock = {
- .freq = 80000000,
+ .freq = 80 * MEGA /* Hz */,
},
.timestamp_freq = 80,
.bittiming_const = &kvaser_usb_hydra_kcan_bittiming_c,
@@ -2058,7 +2059,7 @@ static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_kcan = {
static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_flexc = {
.clock = {
- .freq = 24000000,
+ .freq = 24 * MEGA /* Hz */,
},
.timestamp_freq = 1,
.bittiming_const = &kvaser_usb_flexc_bittiming_const,
@@ -2066,7 +2067,7 @@ static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_flexc = {
static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_rt = {
.clock = {
- .freq = 80000000,
+ .freq = 80 * MEGA /* Hz */,
},
.timestamp_freq = 24,
.bittiming_const = &kvaser_usb_hydra_rt_bittiming_c,
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index a653318f583a..6d64d566873d 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -19,6 +19,7 @@
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/types.h>
+#include <linux/units.h>
#include <linux/usb.h>
#include <linux/can.h>
@@ -446,7 +447,7 @@ static const struct can_bittiming_const kvaser_usb_leaf_m32c_bittiming_const = {
static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_usbcan_dev_cfg = {
.clock = {
- .freq = 8000000,
+ .freq = 8 * MEGA /* Hz */,
},
.timestamp_freq = 1,
.bittiming_const = &kvaser_usb_leaf_m16c_bittiming_const,
@@ -454,7 +455,7 @@ static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_usbcan_dev_cfg = {
static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_m32c_dev_cfg = {
.clock = {
- .freq = 16000000,
+ .freq = 16 * MEGA /* Hz */,
},
.timestamp_freq = 1,
.bittiming_const = &kvaser_usb_leaf_m32c_bittiming_const,
@@ -470,7 +471,7 @@ static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_imx_dev_cfg_16mhz = {
static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_imx_dev_cfg_24mhz = {
.clock = {
- .freq = 24000000,
+ .freq = 24 * MEGA /* Hz */,
},
.timestamp_freq = 1,
.bittiming_const = &kvaser_usb_flexc_bittiming_const,
@@ -478,7 +479,7 @@ static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_imx_dev_cfg_24mhz = {
static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_imx_dev_cfg_32mhz = {
.clock = {
- .freq = 32000000,
+ .freq = 32 * MEGA /* Hz */,
},
.timestamp_freq = 1,
.bittiming_const = &kvaser_usb_flexc_bittiming_const,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 167/731] can: kvaser_usb_leaf: Fix improved state not being reported
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (165 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 166/731] can: kvaser_usb: make use of units.h in assignment of frequency Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 168/731] can: kvaser_usb_leaf: Fix wrong CAN state after stopping Greg Kroah-Hartman
` (574 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jimmy Assarsson, Anssi Hannula,
Marc Kleine-Budde, Sasha Levin
From: Anssi Hannula <anssi.hannula@bitwise.fi>
[ Upstream commit 8d21f5927ae604881f98587fabf6753f88730968 ]
The tested 0bfd:0017 Kvaser Memorator Professional HS/HS FW 2.0.50 and
0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 do not seem to send
any unsolicited events when error counters decrease or when the device
transitions from ERROR_PASSIVE to ERROR_ACTIVE (or WARNING).
This causes the interface to e.g. indefinitely stay in the ERROR_PASSIVE
state.
Fix that by asking for chip state (inc. counters) event every 0.5 secs
when error counters are non-zero.
Since there are non-error-counter devices, also always poll in
ERROR_PASSIVE even if the counters show zero.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-7-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 7 +++
.../net/can/usb/kvaser_usb/kvaser_usb_core.c | 19 +++++-
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 58 +++++++++++++++++++
3 files changed, 81 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
index 62958f04a2f2..1f4583f1dae2 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
@@ -104,6 +104,9 @@ struct kvaser_usb_net_priv {
struct can_priv can;
struct can_berr_counter bec;
+ /* subdriver-specific data */
+ void *sub_priv;
+
struct kvaser_usb *dev;
struct net_device *netdev;
int channel;
@@ -125,6 +128,8 @@ struct kvaser_usb_net_priv {
*
* @dev_setup_endpoints: setup USB in and out endpoints
* @dev_init_card: initialize card
+ * @dev_init_channel: initialize channel
+ * @dev_remove_channel: uninitialize channel
* @dev_get_software_info: get software info
* @dev_get_software_details: get software details
* @dev_get_card_info: get card info
@@ -146,6 +151,8 @@ struct kvaser_usb_dev_ops {
struct can_berr_counter *bec);
int (*dev_setup_endpoints)(struct kvaser_usb *dev);
int (*dev_init_card)(struct kvaser_usb *dev);
+ int (*dev_init_channel)(struct kvaser_usb_net_priv *priv);
+ void (*dev_remove_channel)(struct kvaser_usb_net_priv *priv);
int (*dev_get_software_info)(struct kvaser_usb *dev);
int (*dev_get_software_details)(struct kvaser_usb *dev);
int (*dev_get_card_info)(struct kvaser_usb *dev);
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
index bdcaccf8e2b2..4915d5f180da 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
@@ -672,6 +672,7 @@ static const struct net_device_ops kvaser_usb_netdev_ops = {
static void kvaser_usb_remove_interfaces(struct kvaser_usb *dev)
{
+ const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops;
int i;
for (i = 0; i < dev->nchannels; i++) {
@@ -687,6 +688,9 @@ static void kvaser_usb_remove_interfaces(struct kvaser_usb *dev)
if (!dev->nets[i])
continue;
+ if (ops->dev_remove_channel)
+ ops->dev_remove_channel(dev->nets[i]);
+
free_candev(dev->nets[i]->netdev);
}
}
@@ -754,17 +758,26 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel)
dev->nets[channel] = priv;
+ if (ops->dev_init_channel) {
+ err = ops->dev_init_channel(priv);
+ if (err)
+ goto err;
+ }
+
err = register_candev(netdev);
if (err) {
dev_err(&dev->intf->dev, "Failed to register CAN device\n");
- free_candev(netdev);
- dev->nets[channel] = NULL;
- return err;
+ goto err;
}
netdev_dbg(netdev, "device registered\n");
return 0;
+
+err:
+ free_candev(netdev);
+ dev->nets[channel] = NULL;
+ return err;
}
static int kvaser_usb_probe(struct usb_interface *intf,
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 6d64d566873d..b5d06c6b79ae 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -21,6 +21,7 @@
#include <linux/types.h>
#include <linux/units.h>
#include <linux/usb.h>
+#include <linux/workqueue.h>
#include <linux/can.h>
#include <linux/can/dev.h>
@@ -56,6 +57,7 @@
#define CMD_RX_EXT_MESSAGE 14
#define CMD_TX_EXT_MESSAGE 15
#define CMD_SET_BUS_PARAMS 16
+#define CMD_GET_CHIP_STATE 19
#define CMD_CHIP_STATE_EVENT 20
#define CMD_SET_CTRL_MODE 21
#define CMD_RESET_CHIP 24
@@ -421,6 +423,12 @@ struct kvaser_usb_err_summary {
};
};
+struct kvaser_usb_net_leaf_priv {
+ struct kvaser_usb_net_priv *net;
+
+ struct delayed_work chip_state_req_work;
+};
+
static const struct can_bittiming_const kvaser_usb_leaf_m16c_bittiming_const = {
.name = "kvaser_usb_ucii",
.tseg1_min = 4,
@@ -948,6 +956,16 @@ static int kvaser_usb_leaf_simple_cmd_async(struct kvaser_usb_net_priv *priv,
return err;
}
+static void kvaser_usb_leaf_chip_state_req_work(struct work_struct *work)
+{
+ struct kvaser_usb_net_leaf_priv *leaf =
+ container_of(work, struct kvaser_usb_net_leaf_priv,
+ chip_state_req_work.work);
+ struct kvaser_usb_net_priv *priv = leaf->net;
+
+ kvaser_usb_leaf_simple_cmd_async(priv, CMD_GET_CHIP_STATE);
+}
+
static void
kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
const struct kvaser_usb_err_summary *es,
@@ -1019,6 +1037,7 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev,
struct sk_buff *skb;
struct net_device_stats *stats;
struct kvaser_usb_net_priv *priv;
+ struct kvaser_usb_net_leaf_priv *leaf;
enum can_state old_state, new_state;
if (es->channel >= dev->nchannels) {
@@ -1028,6 +1047,7 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev,
}
priv = dev->nets[es->channel];
+ leaf = priv->sub_priv;
stats = &priv->netdev->stats;
/* Update all of the CAN interface's state and error counters before
@@ -1044,6 +1064,14 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev,
kvaser_usb_leaf_rx_error_update_can_state(priv, es, &tmp_cf);
new_state = priv->can.state;
+ /* If there are errors, request status updates periodically as we do
+ * not get automatic notifications of improved state.
+ */
+ if (new_state < CAN_STATE_BUS_OFF &&
+ (es->rxerr || es->txerr || new_state == CAN_STATE_ERROR_PASSIVE))
+ schedule_delayed_work(&leaf->chip_state_req_work,
+ msecs_to_jiffies(500));
+
skb = alloc_can_err_skb(priv->netdev, &cf);
if (!skb) {
stats->rx_dropped++;
@@ -1578,10 +1606,13 @@ static int kvaser_usb_leaf_start_chip(struct kvaser_usb_net_priv *priv)
static int kvaser_usb_leaf_stop_chip(struct kvaser_usb_net_priv *priv)
{
+ struct kvaser_usb_net_leaf_priv *leaf = priv->sub_priv;
int err;
reinit_completion(&priv->stop_comp);
+ cancel_delayed_work(&leaf->chip_state_req_work);
+
err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_STOP_CHIP,
priv->channel);
if (err)
@@ -1628,6 +1659,31 @@ static int kvaser_usb_leaf_init_card(struct kvaser_usb *dev)
return 0;
}
+static int kvaser_usb_leaf_init_channel(struct kvaser_usb_net_priv *priv)
+{
+ struct kvaser_usb_net_leaf_priv *leaf;
+
+ leaf = devm_kzalloc(&priv->dev->intf->dev, sizeof(*leaf), GFP_KERNEL);
+ if (!leaf)
+ return -ENOMEM;
+
+ leaf->net = priv;
+ INIT_DELAYED_WORK(&leaf->chip_state_req_work,
+ kvaser_usb_leaf_chip_state_req_work);
+
+ priv->sub_priv = leaf;
+
+ return 0;
+}
+
+static void kvaser_usb_leaf_remove_channel(struct kvaser_usb_net_priv *priv)
+{
+ struct kvaser_usb_net_leaf_priv *leaf = priv->sub_priv;
+
+ if (leaf)
+ cancel_delayed_work_sync(&leaf->chip_state_req_work);
+}
+
static int kvaser_usb_leaf_set_bittiming(struct net_device *netdev)
{
struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
@@ -1725,6 +1781,8 @@ const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops = {
.dev_get_berr_counter = kvaser_usb_leaf_get_berr_counter,
.dev_setup_endpoints = kvaser_usb_leaf_setup_endpoints,
.dev_init_card = kvaser_usb_leaf_init_card,
+ .dev_init_channel = kvaser_usb_leaf_init_channel,
+ .dev_remove_channel = kvaser_usb_leaf_remove_channel,
.dev_get_software_info = kvaser_usb_leaf_get_software_info,
.dev_get_software_details = NULL,
.dev_get_card_info = kvaser_usb_leaf_get_card_info,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 168/731] can: kvaser_usb_leaf: Fix wrong CAN state after stopping
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (166 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 167/731] can: kvaser_usb_leaf: Fix improved state not being reported Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 169/731] can: kvaser_usb_leaf: Fix bogus restart events Greg Kroah-Hartman
` (573 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jimmy Assarsson, Anssi Hannula,
Marc Kleine-Budde, Sasha Levin
From: Anssi Hannula <anssi.hannula@bitwise.fi>
[ Upstream commit a11249acf802341294557895d8e5f6aef080253f ]
0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 sends a
CMD_CHIP_STATE_EVENT indicating bus-off after stopping the device,
causing a stopped device to appear as CAN_STATE_BUS_OFF instead of
CAN_STATE_STOPPED.
Fix that by not handling error events on stopped devices.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-8-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index b5d06c6b79ae..5888b2fb5eb3 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -1050,6 +1050,10 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev,
leaf = priv->sub_priv;
stats = &priv->netdev->stats;
+ /* Ignore e.g. state change to bus-off reported just after stopping */
+ if (!netif_running(priv->netdev))
+ return;
+
/* Update all of the CAN interface's state and error counters before
* trying any memory allocation that can actually fail with -ENOMEM.
*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 169/731] can: kvaser_usb_leaf: Fix bogus restart events
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (167 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 168/731] can: kvaser_usb_leaf: Fix wrong CAN state after stopping Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 170/731] can: kvaser_usb: Add struct kvaser_usb_busparams Greg Kroah-Hartman
` (572 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jimmy Assarsson, Anssi Hannula,
Marc Kleine-Budde, Sasha Levin
From: Anssi Hannula <anssi.hannula@bitwise.fi>
[ Upstream commit 90904d326269a38fe5dd895fb2db7c03199654c4 ]
When auto-restart is enabled, the kvaser_usb_leaf driver considers
transition from any state >= CAN_STATE_BUS_OFF as a bus-off recovery
event (restart).
However, these events may occur at interface startup time before
kvaser_usb_open() has set the state to CAN_STATE_ERROR_ACTIVE, causing
restarts counter to increase and CAN_ERR_RESTARTED to be sent despite no
actual restart having occurred.
Fix that by making the auto-restart condition checks more strict so that
they only trigger when the interface was actually in the BUS_OFF state.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-10-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 5888b2fb5eb3..b44a9ca22136 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -900,7 +900,7 @@ static void kvaser_usb_leaf_tx_acknowledge(const struct kvaser_usb *dev,
context = &priv->tx_contexts[tid % dev->max_tx_urbs];
/* Sometimes the state change doesn't come after a bus-off event */
- if (priv->can.restart_ms && priv->can.state >= CAN_STATE_BUS_OFF) {
+ if (priv->can.restart_ms && priv->can.state == CAN_STATE_BUS_OFF) {
struct sk_buff *skb;
struct can_frame *cf;
@@ -1003,7 +1003,7 @@ kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
}
if (priv->can.restart_ms &&
- cur_state >= CAN_STATE_BUS_OFF &&
+ cur_state == CAN_STATE_BUS_OFF &&
new_state < CAN_STATE_BUS_OFF)
priv->can.can_stats.restarts++;
@@ -1093,7 +1093,7 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev,
}
if (priv->can.restart_ms &&
- old_state >= CAN_STATE_BUS_OFF &&
+ old_state == CAN_STATE_BUS_OFF &&
new_state < CAN_STATE_BUS_OFF) {
cf->can_id |= CAN_ERR_RESTARTED;
netif_carrier_on(priv->netdev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 170/731] can: kvaser_usb: Add struct kvaser_usb_busparams
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (168 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 169/731] can: kvaser_usb_leaf: Fix bogus restart events Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 171/731] can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming Greg Kroah-Hartman
` (571 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Anssi Hannula, Jimmy Assarsson,
Marc Kleine-Budde, Sasha Levin
From: Jimmy Assarsson <extja@kvaser.com>
[ Upstream commit 00e5786177649c1e3110f9454fdd34e336597265 ]
Add struct kvaser_usb_busparams containing the busparameters used in
CMD_{SET,GET}_BUSPARAMS* commands.
Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-11-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of: 39d3df6b0ea8 ("can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 8 +++++
.../net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 32 +++++++------------
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 18 ++++-------
3 files changed, 27 insertions(+), 31 deletions(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
index 1f4583f1dae2..cb8018723748 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
@@ -76,6 +76,14 @@ struct kvaser_usb_tx_urb_context {
int dlc;
};
+struct kvaser_usb_busparams {
+ __le32 bitrate;
+ u8 tseg1;
+ u8 tseg2;
+ u8 sjw;
+ u8 nsamples;
+} __packed;
+
struct kvaser_usb {
struct usb_device *udev;
struct usb_interface *intf;
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
index b485f0bc2e6b..64b84c8d5dfd 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
@@ -196,17 +196,9 @@ struct kvaser_cmd_chip_state_event {
#define KVASER_USB_HYDRA_BUS_MODE_CANFD_ISO 0x01
#define KVASER_USB_HYDRA_BUS_MODE_NONISO 0x02
struct kvaser_cmd_set_busparams {
- __le32 bitrate;
- u8 tseg1;
- u8 tseg2;
- u8 sjw;
- u8 nsamples;
+ struct kvaser_usb_busparams busparams_arb;
u8 reserved0[4];
- __le32 bitrate_d;
- u8 tseg1_d;
- u8 tseg2_d;
- u8 sjw_d;
- u8 nsamples_d;
+ struct kvaser_usb_busparams busparams_data;
u8 canfd_mode;
u8 reserved1[7];
} __packed;
@@ -1542,11 +1534,11 @@ static int kvaser_usb_hydra_set_bittiming(struct net_device *netdev)
return -ENOMEM;
cmd->header.cmd_no = CMD_SET_BUSPARAMS_REQ;
- cmd->set_busparams_req.bitrate = cpu_to_le32(bt->bitrate);
- cmd->set_busparams_req.sjw = (u8)sjw;
- cmd->set_busparams_req.tseg1 = (u8)tseg1;
- cmd->set_busparams_req.tseg2 = (u8)tseg2;
- cmd->set_busparams_req.nsamples = 1;
+ cmd->set_busparams_req.busparams_arb.bitrate = cpu_to_le32(bt->bitrate);
+ cmd->set_busparams_req.busparams_arb.sjw = (u8)sjw;
+ cmd->set_busparams_req.busparams_arb.tseg1 = (u8)tseg1;
+ cmd->set_busparams_req.busparams_arb.tseg2 = (u8)tseg2;
+ cmd->set_busparams_req.busparams_arb.nsamples = 1;
kvaser_usb_hydra_set_cmd_dest_he
(cmd, dev->card_data.hydra.channel_to_he[priv->channel]);
@@ -1576,11 +1568,11 @@ static int kvaser_usb_hydra_set_data_bittiming(struct net_device *netdev)
return -ENOMEM;
cmd->header.cmd_no = CMD_SET_BUSPARAMS_FD_REQ;
- cmd->set_busparams_req.bitrate_d = cpu_to_le32(dbt->bitrate);
- cmd->set_busparams_req.sjw_d = (u8)sjw;
- cmd->set_busparams_req.tseg1_d = (u8)tseg1;
- cmd->set_busparams_req.tseg2_d = (u8)tseg2;
- cmd->set_busparams_req.nsamples_d = 1;
+ cmd->set_busparams_req.busparams_data.bitrate = cpu_to_le32(dbt->bitrate);
+ cmd->set_busparams_req.busparams_data.sjw = (u8)sjw;
+ cmd->set_busparams_req.busparams_data.tseg1 = (u8)tseg1;
+ cmd->set_busparams_req.busparams_data.tseg2 = (u8)tseg2;
+ cmd->set_busparams_req.busparams_data.nsamples = 1;
if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
if (priv->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index b44a9ca22136..9818bc6dc8e9 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -164,11 +164,7 @@ struct usbcan_cmd_softinfo {
struct kvaser_cmd_busparams {
u8 tid;
u8 channel;
- __le32 bitrate;
- u8 tseg1;
- u8 tseg2;
- u8 sjw;
- u8 no_samp;
+ struct kvaser_usb_busparams busparams;
} __packed;
struct kvaser_cmd_tx_can {
@@ -1704,15 +1700,15 @@ static int kvaser_usb_leaf_set_bittiming(struct net_device *netdev)
cmd->len = CMD_HEADER_LEN + sizeof(struct kvaser_cmd_busparams);
cmd->u.busparams.channel = priv->channel;
cmd->u.busparams.tid = 0xff;
- cmd->u.busparams.bitrate = cpu_to_le32(bt->bitrate);
- cmd->u.busparams.sjw = bt->sjw;
- cmd->u.busparams.tseg1 = bt->prop_seg + bt->phase_seg1;
- cmd->u.busparams.tseg2 = bt->phase_seg2;
+ cmd->u.busparams.busparams.bitrate = cpu_to_le32(bt->bitrate);
+ cmd->u.busparams.busparams.sjw = bt->sjw;
+ cmd->u.busparams.busparams.tseg1 = bt->prop_seg + bt->phase_seg1;
+ cmd->u.busparams.busparams.tseg2 = bt->phase_seg2;
if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
- cmd->u.busparams.no_samp = 3;
+ cmd->u.busparams.busparams.nsamples = 3;
else
- cmd->u.busparams.no_samp = 1;
+ cmd->u.busparams.busparams.nsamples = 1;
rc = kvaser_usb_send_cmd(dev, cmd, cmd->len);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 171/731] can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (169 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 170/731] can: kvaser_usb: Add struct kvaser_usb_busparams Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 172/731] drm/rockchip: lvds: fix PM usage counter unbalance in poweron Greg Kroah-Hartman
` (570 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Anssi Hannula, Jimmy Assarsson,
Marc Kleine-Budde, Sasha Levin
From: Jimmy Assarsson <extja@kvaser.com>
[ Upstream commit 39d3df6b0ea80f9b515c632ca07b39b1c156edee ]
The device will respond with a CMD_ERROR_EVENT command, with error_code
KVASER_USB_{LEAF,HYDRA}_ERROR_EVENT_PARAM, if the CMD_SET_BUSPARAMS_REQ
contains invalid bittiming parameters.
However, this command does not contain any channel reference.
To check if the CMD_SET_BUSPARAMS_REQ was successful, redback and compare
the requested bittiming parameters with the device reported parameters.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Co-developed-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-12-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 15 +-
.../net/can/usb/kvaser_usb/kvaser_usb_core.c | 96 ++++++++++-
.../net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 150 +++++++++++++++---
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 64 ++++++--
4 files changed, 284 insertions(+), 41 deletions(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
index cb8018723748..5699531f8787 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
@@ -119,9 +119,12 @@ struct kvaser_usb_net_priv {
struct net_device *netdev;
int channel;
- struct completion start_comp, stop_comp, flush_comp;
+ struct completion start_comp, stop_comp, flush_comp,
+ get_busparams_comp;
struct usb_anchor tx_submitted;
+ struct kvaser_usb_busparams busparams_nominal, busparams_data;
+
spinlock_t tx_contexts_lock; /* lock for active_tx_contexts */
int active_tx_contexts;
struct kvaser_usb_tx_urb_context tx_contexts[];
@@ -131,7 +134,9 @@ struct kvaser_usb_net_priv {
* struct kvaser_usb_dev_ops - Device specific functions
* @dev_set_mode: used for can.do_set_mode
* @dev_set_bittiming: used for can.do_set_bittiming
+ * @dev_get_busparams: readback arbitration busparams
* @dev_set_data_bittiming: used for can.do_set_data_bittiming
+ * @dev_get_data_busparams: readback data busparams
* @dev_get_berr_counter: used for can.do_get_berr_counter
*
* @dev_setup_endpoints: setup USB in and out endpoints
@@ -153,8 +158,12 @@ struct kvaser_usb_net_priv {
*/
struct kvaser_usb_dev_ops {
int (*dev_set_mode)(struct net_device *netdev, enum can_mode mode);
- int (*dev_set_bittiming)(struct net_device *netdev);
- int (*dev_set_data_bittiming)(struct net_device *netdev);
+ int (*dev_set_bittiming)(const struct net_device *netdev,
+ const struct kvaser_usb_busparams *busparams);
+ int (*dev_get_busparams)(struct kvaser_usb_net_priv *priv);
+ int (*dev_set_data_bittiming)(const struct net_device *netdev,
+ const struct kvaser_usb_busparams *busparams);
+ int (*dev_get_data_busparams)(struct kvaser_usb_net_priv *priv);
int (*dev_get_berr_counter)(const struct net_device *netdev,
struct can_berr_counter *bec);
int (*dev_setup_endpoints)(struct kvaser_usb *dev);
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
index 4915d5f180da..09dbc51347d7 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
@@ -443,10 +443,6 @@ static int kvaser_usb_open(struct net_device *netdev)
if (err)
return err;
- err = kvaser_usb_setup_rx_urbs(dev);
- if (err)
- goto error;
-
err = ops->dev_set_opt_mode(priv);
if (err)
goto error;
@@ -537,6 +533,93 @@ static int kvaser_usb_close(struct net_device *netdev)
return 0;
}
+static int kvaser_usb_set_bittiming(struct net_device *netdev)
+{
+ struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
+ struct kvaser_usb *dev = priv->dev;
+ const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops;
+ struct can_bittiming *bt = &priv->can.bittiming;
+
+ struct kvaser_usb_busparams busparams;
+ int tseg1 = bt->prop_seg + bt->phase_seg1;
+ int tseg2 = bt->phase_seg2;
+ int sjw = bt->sjw;
+ int err = -EOPNOTSUPP;
+
+ busparams.bitrate = cpu_to_le32(bt->bitrate);
+ busparams.sjw = (u8)sjw;
+ busparams.tseg1 = (u8)tseg1;
+ busparams.tseg2 = (u8)tseg2;
+ if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+ busparams.nsamples = 3;
+ else
+ busparams.nsamples = 1;
+
+ err = ops->dev_set_bittiming(netdev, &busparams);
+ if (err)
+ return err;
+
+ err = kvaser_usb_setup_rx_urbs(priv->dev);
+ if (err)
+ return err;
+
+ err = ops->dev_get_busparams(priv);
+ if (err) {
+ /* Treat EOPNOTSUPP as success */
+ if (err == -EOPNOTSUPP)
+ err = 0;
+ return err;
+ }
+
+ if (memcmp(&busparams, &priv->busparams_nominal,
+ sizeof(priv->busparams_nominal)) != 0)
+ err = -EINVAL;
+
+ return err;
+}
+
+static int kvaser_usb_set_data_bittiming(struct net_device *netdev)
+{
+ struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
+ struct kvaser_usb *dev = priv->dev;
+ const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops;
+ struct can_bittiming *dbt = &priv->can.data_bittiming;
+
+ struct kvaser_usb_busparams busparams;
+ int tseg1 = dbt->prop_seg + dbt->phase_seg1;
+ int tseg2 = dbt->phase_seg2;
+ int sjw = dbt->sjw;
+ int err;
+
+ if (!ops->dev_set_data_bittiming ||
+ !ops->dev_get_data_busparams)
+ return -EOPNOTSUPP;
+
+ busparams.bitrate = cpu_to_le32(dbt->bitrate);
+ busparams.sjw = (u8)sjw;
+ busparams.tseg1 = (u8)tseg1;
+ busparams.tseg2 = (u8)tseg2;
+ busparams.nsamples = 1;
+
+ err = ops->dev_set_data_bittiming(netdev, &busparams);
+ if (err)
+ return err;
+
+ err = kvaser_usb_setup_rx_urbs(priv->dev);
+ if (err)
+ return err;
+
+ err = ops->dev_get_data_busparams(priv);
+ if (err)
+ return err;
+
+ if (memcmp(&busparams, &priv->busparams_data,
+ sizeof(priv->busparams_data)) != 0)
+ err = -EINVAL;
+
+ return err;
+}
+
static void kvaser_usb_write_bulk_callback(struct urb *urb)
{
struct kvaser_usb_tx_urb_context *context = urb->context;
@@ -722,6 +805,7 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel)
init_completion(&priv->start_comp);
init_completion(&priv->stop_comp);
init_completion(&priv->flush_comp);
+ init_completion(&priv->get_busparams_comp);
priv->can.ctrlmode_supported = 0;
priv->dev = dev;
@@ -734,7 +818,7 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel)
priv->can.state = CAN_STATE_STOPPED;
priv->can.clock.freq = dev->cfg->clock.freq;
priv->can.bittiming_const = dev->cfg->bittiming_const;
- priv->can.do_set_bittiming = ops->dev_set_bittiming;
+ priv->can.do_set_bittiming = kvaser_usb_set_bittiming;
priv->can.do_set_mode = ops->dev_set_mode;
if ((driver_info->quirks & KVASER_USB_QUIRK_HAS_TXRX_ERRORS) ||
(priv->dev->card_data.capabilities & KVASER_USB_CAP_BERR_CAP))
@@ -746,7 +830,7 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel)
if (priv->can.ctrlmode_supported & CAN_CTRLMODE_FD) {
priv->can.data_bittiming_const = dev->cfg->data_bittiming_const;
- priv->can.do_set_data_bittiming = ops->dev_set_data_bittiming;
+ priv->can.do_set_data_bittiming = kvaser_usb_set_data_bittiming;
}
netdev->flags |= IFF_ECHO;
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
index 64b84c8d5dfd..6cc65bf28d03 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
@@ -45,6 +45,8 @@ static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_rt;
/* Minihydra command IDs */
#define CMD_SET_BUSPARAMS_REQ 16
+#define CMD_GET_BUSPARAMS_REQ 17
+#define CMD_GET_BUSPARAMS_RESP 18
#define CMD_GET_CHIP_STATE_REQ 19
#define CMD_CHIP_STATE_EVENT 20
#define CMD_SET_DRIVERMODE_REQ 21
@@ -196,13 +198,26 @@ struct kvaser_cmd_chip_state_event {
#define KVASER_USB_HYDRA_BUS_MODE_CANFD_ISO 0x01
#define KVASER_USB_HYDRA_BUS_MODE_NONISO 0x02
struct kvaser_cmd_set_busparams {
- struct kvaser_usb_busparams busparams_arb;
+ struct kvaser_usb_busparams busparams_nominal;
u8 reserved0[4];
struct kvaser_usb_busparams busparams_data;
u8 canfd_mode;
u8 reserved1[7];
} __packed;
+/* Busparam type */
+#define KVASER_USB_HYDRA_BUSPARAM_TYPE_CAN 0x00
+#define KVASER_USB_HYDRA_BUSPARAM_TYPE_CANFD 0x01
+struct kvaser_cmd_get_busparams_req {
+ u8 type;
+ u8 reserved[27];
+} __packed;
+
+struct kvaser_cmd_get_busparams_res {
+ struct kvaser_usb_busparams busparams;
+ u8 reserved[20];
+} __packed;
+
/* Ctrl modes */
#define KVASER_USB_HYDRA_CTRLMODE_NORMAL 0x01
#define KVASER_USB_HYDRA_CTRLMODE_LISTEN 0x02
@@ -273,6 +288,8 @@ struct kvaser_cmd {
struct kvaser_cmd_error_event error_event;
struct kvaser_cmd_set_busparams set_busparams_req;
+ struct kvaser_cmd_get_busparams_req get_busparams_req;
+ struct kvaser_cmd_get_busparams_res get_busparams_res;
struct kvaser_cmd_chip_state_event chip_state_event;
@@ -355,6 +372,10 @@ struct kvaser_cmd_ext {
} __packed;
} __packed;
+struct kvaser_usb_net_hydra_priv {
+ int pending_get_busparams_type;
+};
+
static const struct can_bittiming_const kvaser_usb_hydra_kcan_bittiming_c = {
.name = "kvaser_usb_kcan",
.tseg1_min = 1,
@@ -832,6 +853,39 @@ static void kvaser_usb_hydra_flush_queue_reply(const struct kvaser_usb *dev,
complete(&priv->flush_comp);
}
+static void kvaser_usb_hydra_get_busparams_reply(const struct kvaser_usb *dev,
+ const struct kvaser_cmd *cmd)
+{
+ struct kvaser_usb_net_priv *priv;
+ struct kvaser_usb_net_hydra_priv *hydra;
+
+ priv = kvaser_usb_hydra_net_priv_from_cmd(dev, cmd);
+ if (!priv)
+ return;
+
+ hydra = priv->sub_priv;
+ if (!hydra)
+ return;
+
+ switch (hydra->pending_get_busparams_type) {
+ case KVASER_USB_HYDRA_BUSPARAM_TYPE_CAN:
+ memcpy(&priv->busparams_nominal, &cmd->get_busparams_res.busparams,
+ sizeof(priv->busparams_nominal));
+ break;
+ case KVASER_USB_HYDRA_BUSPARAM_TYPE_CANFD:
+ memcpy(&priv->busparams_data, &cmd->get_busparams_res.busparams,
+ sizeof(priv->busparams_nominal));
+ break;
+ default:
+ dev_warn(&dev->intf->dev, "Unknown get_busparams_type %d\n",
+ hydra->pending_get_busparams_type);
+ break;
+ }
+ hydra->pending_get_busparams_type = -1;
+
+ complete(&priv->get_busparams_comp);
+}
+
static void
kvaser_usb_hydra_bus_status_to_can_state(const struct kvaser_usb_net_priv *priv,
u8 bus_status,
@@ -1318,6 +1372,10 @@ static void kvaser_usb_hydra_handle_cmd_std(const struct kvaser_usb *dev,
kvaser_usb_hydra_state_event(dev, cmd);
break;
+ case CMD_GET_BUSPARAMS_RESP:
+ kvaser_usb_hydra_get_busparams_reply(dev, cmd);
+ break;
+
case CMD_ERROR_EVENT:
kvaser_usb_hydra_error_event(dev, cmd);
break;
@@ -1518,15 +1576,58 @@ static int kvaser_usb_hydra_set_mode(struct net_device *netdev,
return err;
}
-static int kvaser_usb_hydra_set_bittiming(struct net_device *netdev)
+static int kvaser_usb_hydra_get_busparams(struct kvaser_usb_net_priv *priv,
+ int busparams_type)
+{
+ struct kvaser_usb *dev = priv->dev;
+ struct kvaser_usb_net_hydra_priv *hydra = priv->sub_priv;
+ struct kvaser_cmd *cmd;
+ int err;
+
+ if (!hydra)
+ return -EINVAL;
+
+ cmd = kcalloc(1, sizeof(struct kvaser_cmd), GFP_KERNEL);
+ if (!cmd)
+ return -ENOMEM;
+
+ cmd->header.cmd_no = CMD_GET_BUSPARAMS_REQ;
+ kvaser_usb_hydra_set_cmd_dest_he
+ (cmd, dev->card_data.hydra.channel_to_he[priv->channel]);
+ kvaser_usb_hydra_set_cmd_transid
+ (cmd, kvaser_usb_hydra_get_next_transid(dev));
+ cmd->get_busparams_req.type = busparams_type;
+ hydra->pending_get_busparams_type = busparams_type;
+
+ reinit_completion(&priv->get_busparams_comp);
+
+ err = kvaser_usb_send_cmd(dev, cmd, kvaser_usb_hydra_cmd_size(cmd));
+ if (err)
+ return err;
+
+ if (!wait_for_completion_timeout(&priv->get_busparams_comp,
+ msecs_to_jiffies(KVASER_USB_TIMEOUT)))
+ return -ETIMEDOUT;
+
+ return err;
+}
+
+static int kvaser_usb_hydra_get_nominal_busparams(struct kvaser_usb_net_priv *priv)
+{
+ return kvaser_usb_hydra_get_busparams(priv, KVASER_USB_HYDRA_BUSPARAM_TYPE_CAN);
+}
+
+static int kvaser_usb_hydra_get_data_busparams(struct kvaser_usb_net_priv *priv)
+{
+ return kvaser_usb_hydra_get_busparams(priv, KVASER_USB_HYDRA_BUSPARAM_TYPE_CANFD);
+}
+
+static int kvaser_usb_hydra_set_bittiming(const struct net_device *netdev,
+ const struct kvaser_usb_busparams *busparams)
{
struct kvaser_cmd *cmd;
struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
- struct can_bittiming *bt = &priv->can.bittiming;
struct kvaser_usb *dev = priv->dev;
- int tseg1 = bt->prop_seg + bt->phase_seg1;
- int tseg2 = bt->phase_seg2;
- int sjw = bt->sjw;
int err;
cmd = kcalloc(1, sizeof(struct kvaser_cmd), GFP_KERNEL);
@@ -1534,11 +1635,8 @@ static int kvaser_usb_hydra_set_bittiming(struct net_device *netdev)
return -ENOMEM;
cmd->header.cmd_no = CMD_SET_BUSPARAMS_REQ;
- cmd->set_busparams_req.busparams_arb.bitrate = cpu_to_le32(bt->bitrate);
- cmd->set_busparams_req.busparams_arb.sjw = (u8)sjw;
- cmd->set_busparams_req.busparams_arb.tseg1 = (u8)tseg1;
- cmd->set_busparams_req.busparams_arb.tseg2 = (u8)tseg2;
- cmd->set_busparams_req.busparams_arb.nsamples = 1;
+ memcpy(&cmd->set_busparams_req.busparams_nominal, busparams,
+ sizeof(cmd->set_busparams_req.busparams_nominal));
kvaser_usb_hydra_set_cmd_dest_he
(cmd, dev->card_data.hydra.channel_to_he[priv->channel]);
@@ -1552,15 +1650,12 @@ static int kvaser_usb_hydra_set_bittiming(struct net_device *netdev)
return err;
}
-static int kvaser_usb_hydra_set_data_bittiming(struct net_device *netdev)
+static int kvaser_usb_hydra_set_data_bittiming(const struct net_device *netdev,
+ const struct kvaser_usb_busparams *busparams)
{
struct kvaser_cmd *cmd;
struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
- struct can_bittiming *dbt = &priv->can.data_bittiming;
struct kvaser_usb *dev = priv->dev;
- int tseg1 = dbt->prop_seg + dbt->phase_seg1;
- int tseg2 = dbt->phase_seg2;
- int sjw = dbt->sjw;
int err;
cmd = kcalloc(1, sizeof(struct kvaser_cmd), GFP_KERNEL);
@@ -1568,11 +1663,8 @@ static int kvaser_usb_hydra_set_data_bittiming(struct net_device *netdev)
return -ENOMEM;
cmd->header.cmd_no = CMD_SET_BUSPARAMS_FD_REQ;
- cmd->set_busparams_req.busparams_data.bitrate = cpu_to_le32(dbt->bitrate);
- cmd->set_busparams_req.busparams_data.sjw = (u8)sjw;
- cmd->set_busparams_req.busparams_data.tseg1 = (u8)tseg1;
- cmd->set_busparams_req.busparams_data.tseg2 = (u8)tseg2;
- cmd->set_busparams_req.busparams_data.nsamples = 1;
+ memcpy(&cmd->set_busparams_req.busparams_data, busparams,
+ sizeof(cmd->set_busparams_req.busparams_data));
if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
if (priv->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO)
@@ -1679,6 +1771,19 @@ static int kvaser_usb_hydra_init_card(struct kvaser_usb *dev)
return 0;
}
+static int kvaser_usb_hydra_init_channel(struct kvaser_usb_net_priv *priv)
+{
+ struct kvaser_usb_net_hydra_priv *hydra;
+
+ hydra = devm_kzalloc(&priv->dev->intf->dev, sizeof(*hydra), GFP_KERNEL);
+ if (!hydra)
+ return -ENOMEM;
+
+ priv->sub_priv = hydra;
+
+ return 0;
+}
+
static int kvaser_usb_hydra_get_software_info(struct kvaser_usb *dev)
{
struct kvaser_cmd cmd;
@@ -2023,10 +2128,13 @@ kvaser_usb_hydra_frame_to_cmd(const struct kvaser_usb_net_priv *priv,
const struct kvaser_usb_dev_ops kvaser_usb_hydra_dev_ops = {
.dev_set_mode = kvaser_usb_hydra_set_mode,
.dev_set_bittiming = kvaser_usb_hydra_set_bittiming,
+ .dev_get_busparams = kvaser_usb_hydra_get_nominal_busparams,
.dev_set_data_bittiming = kvaser_usb_hydra_set_data_bittiming,
+ .dev_get_data_busparams = kvaser_usb_hydra_get_data_busparams,
.dev_get_berr_counter = kvaser_usb_hydra_get_berr_counter,
.dev_setup_endpoints = kvaser_usb_hydra_setup_endpoints,
.dev_init_card = kvaser_usb_hydra_init_card,
+ .dev_init_channel = kvaser_usb_hydra_init_channel,
.dev_get_software_info = kvaser_usb_hydra_get_software_info,
.dev_get_software_details = kvaser_usb_hydra_get_software_details,
.dev_get_card_info = kvaser_usb_hydra_get_card_info,
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 9818bc6dc8e9..ad3103391c79 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -57,6 +57,8 @@
#define CMD_RX_EXT_MESSAGE 14
#define CMD_TX_EXT_MESSAGE 15
#define CMD_SET_BUS_PARAMS 16
+#define CMD_GET_BUS_PARAMS 17
+#define CMD_GET_BUS_PARAMS_REPLY 18
#define CMD_GET_CHIP_STATE 19
#define CMD_CHIP_STATE_EVENT 20
#define CMD_SET_CTRL_MODE 21
@@ -376,6 +378,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_leaf[] = {
[CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.leaf.chip_state_event),
[CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.leaf.can_error_event),
[CMD_GET_CAPABILITIES_RESP] = kvaser_fsize(u.leaf.cap_res),
+ [CMD_GET_BUS_PARAMS_REPLY] = kvaser_fsize(u.busparams),
[CMD_ERROR_EVENT] = kvaser_fsize(u.leaf.error_event),
/* ignored events: */
[CMD_FLUSH_QUEUE_REPLY] = CMD_SIZE_ANY,
@@ -1468,6 +1471,25 @@ static void kvaser_usb_leaf_stop_chip_reply(const struct kvaser_usb *dev,
complete(&priv->stop_comp);
}
+static void kvaser_usb_leaf_get_busparams_reply(const struct kvaser_usb *dev,
+ const struct kvaser_cmd *cmd)
+{
+ struct kvaser_usb_net_priv *priv;
+ u8 channel = cmd->u.busparams.channel;
+
+ if (channel >= dev->nchannels) {
+ dev_err(&dev->intf->dev,
+ "Invalid channel number (%d)\n", channel);
+ return;
+ }
+
+ priv = dev->nets[channel];
+ memcpy(&priv->busparams_nominal, &cmd->u.busparams.busparams,
+ sizeof(priv->busparams_nominal));
+
+ complete(&priv->get_busparams_comp);
+}
+
static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev,
const struct kvaser_cmd *cmd)
{
@@ -1510,6 +1532,10 @@ static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev,
kvaser_usb_leaf_error_event(dev, cmd);
break;
+ case CMD_GET_BUS_PARAMS_REPLY:
+ kvaser_usb_leaf_get_busparams_reply(dev, cmd);
+ break;
+
/* Ignored commands */
case CMD_USBCAN_CLOCK_OVERFLOW_EVENT:
if (dev->driver_info->family != KVASER_USBCAN)
@@ -1684,10 +1710,10 @@ static void kvaser_usb_leaf_remove_channel(struct kvaser_usb_net_priv *priv)
cancel_delayed_work_sync(&leaf->chip_state_req_work);
}
-static int kvaser_usb_leaf_set_bittiming(struct net_device *netdev)
+static int kvaser_usb_leaf_set_bittiming(const struct net_device *netdev,
+ const struct kvaser_usb_busparams *busparams)
{
struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
- struct can_bittiming *bt = &priv->can.bittiming;
struct kvaser_usb *dev = priv->dev;
struct kvaser_cmd *cmd;
int rc;
@@ -1700,15 +1726,8 @@ static int kvaser_usb_leaf_set_bittiming(struct net_device *netdev)
cmd->len = CMD_HEADER_LEN + sizeof(struct kvaser_cmd_busparams);
cmd->u.busparams.channel = priv->channel;
cmd->u.busparams.tid = 0xff;
- cmd->u.busparams.busparams.bitrate = cpu_to_le32(bt->bitrate);
- cmd->u.busparams.busparams.sjw = bt->sjw;
- cmd->u.busparams.busparams.tseg1 = bt->prop_seg + bt->phase_seg1;
- cmd->u.busparams.busparams.tseg2 = bt->phase_seg2;
-
- if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
- cmd->u.busparams.busparams.nsamples = 3;
- else
- cmd->u.busparams.busparams.nsamples = 1;
+ memcpy(&cmd->u.busparams.busparams, busparams,
+ sizeof(cmd->u.busparams.busparams));
rc = kvaser_usb_send_cmd(dev, cmd, cmd->len);
@@ -1716,6 +1735,27 @@ static int kvaser_usb_leaf_set_bittiming(struct net_device *netdev)
return rc;
}
+static int kvaser_usb_leaf_get_busparams(struct kvaser_usb_net_priv *priv)
+{
+ int err;
+
+ if (priv->dev->driver_info->family == KVASER_USBCAN)
+ return -EOPNOTSUPP;
+
+ reinit_completion(&priv->get_busparams_comp);
+
+ err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_GET_BUS_PARAMS,
+ priv->channel);
+ if (err)
+ return err;
+
+ if (!wait_for_completion_timeout(&priv->get_busparams_comp,
+ msecs_to_jiffies(KVASER_USB_TIMEOUT)))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
static int kvaser_usb_leaf_set_mode(struct net_device *netdev,
enum can_mode mode)
{
@@ -1777,7 +1817,9 @@ static int kvaser_usb_leaf_setup_endpoints(struct kvaser_usb *dev)
const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops = {
.dev_set_mode = kvaser_usb_leaf_set_mode,
.dev_set_bittiming = kvaser_usb_leaf_set_bittiming,
+ .dev_get_busparams = kvaser_usb_leaf_get_busparams,
.dev_set_data_bittiming = NULL,
+ .dev_get_data_busparams = NULL,
.dev_get_berr_counter = kvaser_usb_leaf_get_berr_counter,
.dev_setup_endpoints = kvaser_usb_leaf_setup_endpoints,
.dev_init_card = kvaser_usb_leaf_init_card,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 172/731] drm/rockchip: lvds: fix PM usage counter unbalance in poweron
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (170 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 171/731] can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 173/731] clk: renesas: r9a06g032: Repair grave increment error Greg Kroah-Hartman
` (569 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Qilong, Heiko Stuebner, Sasha Levin
From: Zhang Qilong <zhangqilong3@huawei.com>
[ Upstream commit 4dba27f1a14592ac4cf71c3bc1cc1fd05dea8015 ]
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
We fix it by replacing it with the newest pm_runtime_resume_and_get
to keep usage counter balanced.
Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Fixes: cca1705c3d89 ("drm/rockchip: lvds: Add PX30 support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922132107.105419-3-zhangqilong3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/rockchip/rockchip_lvds.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c b/drivers/gpu/drm/rockchip/rockchip_lvds.c
index 551653940e39..2550429df49f 100644
--- a/drivers/gpu/drm/rockchip/rockchip_lvds.c
+++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
@@ -145,7 +145,7 @@ static int rk3288_lvds_poweron(struct rockchip_lvds *lvds)
DRM_DEV_ERROR(lvds->dev, "failed to enable lvds pclk %d\n", ret);
return ret;
}
- ret = pm_runtime_get_sync(lvds->dev);
+ ret = pm_runtime_resume_and_get(lvds->dev);
if (ret < 0) {
DRM_DEV_ERROR(lvds->dev, "failed to get pm runtime: %d\n", ret);
clk_disable(lvds->pclk);
@@ -329,16 +329,20 @@ static int px30_lvds_poweron(struct rockchip_lvds *lvds)
{
int ret;
- ret = pm_runtime_get_sync(lvds->dev);
+ ret = pm_runtime_resume_and_get(lvds->dev);
if (ret < 0) {
DRM_DEV_ERROR(lvds->dev, "failed to get pm runtime: %d\n", ret);
return ret;
}
/* Enable LVDS mode */
- return regmap_update_bits(lvds->grf, PX30_LVDS_GRF_PD_VO_CON1,
+ ret = regmap_update_bits(lvds->grf, PX30_LVDS_GRF_PD_VO_CON1,
PX30_LVDS_MODE_EN(1) | PX30_LVDS_P2S_EN(1),
PX30_LVDS_MODE_EN(1) | PX30_LVDS_P2S_EN(1));
+ if (ret)
+ pm_runtime_put(lvds->dev);
+
+ return ret;
}
static void px30_lvds_poweroff(struct rockchip_lvds *lvds)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 173/731] clk: renesas: r9a06g032: Repair grave increment error
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (171 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 172/731] drm/rockchip: lvds: fix PM usage counter unbalance in poweron Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 174/731] spi: Update reference to struct spi_controller Greg Kroah-Hartman
` (568 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ralph Siemsen, Marek Vasut,
Gareth Williams, Geert Uytterhoeven, Sasha Levin
From: Marek Vasut <marex@denx.de>
[ Upstream commit 02693e11611e082e3c4d8653e8af028e43d31164 ]
If condition (clkspec.np != pd->dev.of_node) is true, then the driver
ends up in an endless loop, forever, locking up the machine.
Fixes: aad03a66f902 ("clk: renesas: r9a06g032: Add clock domain support")
Reviewed-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Gareth Williams <gareth.williams.jx@renesas.com>
Link: https://lore.kernel.org/r/20221028113834.7496-1-marex@denx.de
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/renesas/r9a06g032-clocks.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index abc0891fd96d..3e43ae8480dd 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -386,7 +386,7 @@ static int r9a06g032_attach_dev(struct generic_pm_domain *pd,
int error;
int index;
- while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i,
+ while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i++,
&clkspec)) {
if (clkspec.np != pd->dev.of_node)
continue;
@@ -399,7 +399,6 @@ static int r9a06g032_attach_dev(struct generic_pm_domain *pd,
if (error)
return error;
}
- i++;
}
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 174/731] spi: Update reference to struct spi_controller
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (172 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 173/731] clk: renesas: r9a06g032: Repair grave increment error Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 175/731] drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure Greg Kroah-Hartman
` (567 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jonathan Neuschäfer,
Mark Brown, Sasha Levin
From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
[ Upstream commit bf585ccee22faf469d82727cf375868105b362f7 ]
struct spi_master has been renamed to struct spi_controller. Update the
reference in spi.rst to make it clickable again.
Fixes: 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221101173252.1069294-1-j.neuschaefer@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/driver-api/spi.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/driver-api/spi.rst b/Documentation/driver-api/spi.rst
index f64cb666498a..f28887045049 100644
--- a/Documentation/driver-api/spi.rst
+++ b/Documentation/driver-api/spi.rst
@@ -25,8 +25,8 @@ hardware, which may be as simple as a set of GPIO pins or as complex as
a pair of FIFOs connected to dual DMA engines on the other side of the
SPI shift register (maximizing throughput). Such drivers bridge between
whatever bus they sit on (often the platform bus) and SPI, and expose
-the SPI side of their device as a :c:type:`struct spi_master
-<spi_master>`. SPI devices are children of that master,
+the SPI side of their device as a :c:type:`struct spi_controller
+<spi_controller>`. SPI devices are children of that master,
represented as a :c:type:`struct spi_device <spi_device>` and
manufactured from :c:type:`struct spi_board_info
<spi_board_info>` descriptors which are usually provided by
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 175/731] drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (173 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 174/731] spi: Update reference to struct spi_controller Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 176/731] ima: Handle -ESTALE returned by ima_filter_rule_match() Greg Kroah-Hartman
` (566 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marek Vasut, Linus Walleij, Sasha Levin
From: Marek Vasut <marex@denx.de>
[ Upstream commit c62102165dd79284d42383d2f7ed17301bd8e629 ]
In case mipi_dsi_attach() fails, call drm_panel_remove() to
avoid memory leak.
Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014231106.468063-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/panel/panel-sitronix-st7701.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7701.c b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
index 320a2a8fd459..098955526b68 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7701.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
@@ -384,7 +384,15 @@ static int st7701_dsi_probe(struct mipi_dsi_device *dsi)
st7701->dsi = dsi;
st7701->desc = desc;
- return mipi_dsi_attach(dsi);
+ ret = mipi_dsi_attach(dsi);
+ if (ret)
+ goto err_attach;
+
+ return 0;
+
+err_attach:
+ drm_panel_remove(&st7701->panel);
+ return ret;
}
static int st7701_dsi_remove(struct mipi_dsi_device *dsi)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 176/731] ima: Handle -ESTALE returned by ima_filter_rule_match()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (174 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 175/731] drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 177/731] drm/msm/hdmi: drop unused GPIO support Greg Kroah-Hartman
` (565 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, GUO Zihua, Roberto Sassu,
Mimi Zohar, Sasha Levin
From: GUO Zihua <guozihua@huawei.com>
[ Upstream commit c7423dbdbc9ecef7fff5239d144cad4b9887f4de ]
IMA relies on the blocking LSM policy notifier callback to update the
LSM based IMA policy rules.
When SELinux update its policies, IMA would be notified and starts
updating all its lsm rules one-by-one. During this time, -ESTALE would
be returned by ima_filter_rule_match() if it is called with a LSM rule
that has not yet been updated. In ima_match_rules(), -ESTALE is not
handled, and the LSM rule is considered a match, causing extra files
to be measured by IMA.
Fix it by re-initializing a temporary rule if -ESTALE is returned by
ima_filter_rule_match(). The origin rule in the rule list would be
updated by the LSM policy notifier callback.
Fixes: b16942455193 ("ima: use the lsm policy update notifier")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/integrity/ima/ima_policy.c | 41 ++++++++++++++++++++++-------
1 file changed, 32 insertions(+), 9 deletions(-)
diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c
index 748b97a2582a..844d69f6ac00 100644
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -542,6 +542,9 @@ static bool ima_match_rules(struct ima_rule_entry *rule,
const char *func_data)
{
int i;
+ bool result = false;
+ struct ima_rule_entry *lsm_rule = rule;
+ bool rule_reinitialized = false;
if ((rule->flags & IMA_FUNC) &&
(rule->func != func && func != POST_SETATTR))
@@ -590,35 +593,55 @@ static bool ima_match_rules(struct ima_rule_entry *rule,
int rc = 0;
u32 osid;
- if (!rule->lsm[i].rule) {
- if (!rule->lsm[i].args_p)
+ if (!lsm_rule->lsm[i].rule) {
+ if (!lsm_rule->lsm[i].args_p)
continue;
else
return false;
}
+
+retry:
switch (i) {
case LSM_OBJ_USER:
case LSM_OBJ_ROLE:
case LSM_OBJ_TYPE:
security_inode_getsecid(inode, &osid);
- rc = ima_filter_rule_match(osid, rule->lsm[i].type,
+ rc = ima_filter_rule_match(osid, lsm_rule->lsm[i].type,
Audit_equal,
- rule->lsm[i].rule);
+ lsm_rule->lsm[i].rule);
break;
case LSM_SUBJ_USER:
case LSM_SUBJ_ROLE:
case LSM_SUBJ_TYPE:
- rc = ima_filter_rule_match(secid, rule->lsm[i].type,
+ rc = ima_filter_rule_match(secid, lsm_rule->lsm[i].type,
Audit_equal,
- rule->lsm[i].rule);
+ lsm_rule->lsm[i].rule);
break;
default:
break;
}
- if (!rc)
- return false;
+
+ if (rc == -ESTALE && !rule_reinitialized) {
+ lsm_rule = ima_lsm_copy_rule(rule);
+ if (lsm_rule) {
+ rule_reinitialized = true;
+ goto retry;
+ }
+ }
+ if (!rc) {
+ result = false;
+ goto out;
+ }
}
- return true;
+ result = true;
+
+out:
+ if (rule_reinitialized) {
+ for (i = 0; i < MAX_LSM_RULES; i++)
+ ima_filter_rule_free(lsm_rule->lsm[i].rule);
+ kfree(lsm_rule);
+ }
+ return result;
}
/*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 177/731] drm/msm/hdmi: drop unused GPIO support
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (175 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 176/731] ima: Handle -ESTALE returned by ima_filter_rule_match() Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 178/731] drm/msm/hdmi: use devres helper for runtime PM management Greg Kroah-Hartman
` (564 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernel test robot, Dmitry Baryshkov,
Stephen Boyd, Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 68e674b13b17ed41aac2763d12ece6deaae8df58 ]
The HDMI driver has code to configure extra GPIOs, which predates
pinctrl support. Nowadays all platforms should use pinctrl instead.
Neither of upstreamed Qualcomm platforms uses these properties, so it's
safe to drop them.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488858/
Link: https://lore.kernel.org/r/20220609122350.3157529-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Stable-dep-of: b964444b2b64 ("drm/msm/hdmi: use devres helper for runtime PM management")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 66 +++++++----------------------
drivers/gpu/drm/msm/hdmi/hdmi.h | 13 +-----
drivers/gpu/drm/msm/hdmi/hdmi_hpd.c | 62 ++-------------------------
3 files changed, 21 insertions(+), 120 deletions(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index f6b09e8eca67..efb14043a6ec 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -247,6 +247,20 @@ static struct hdmi *msm_hdmi_init(struct platform_device *pdev)
hdmi->pwr_clks[i] = clk;
}
+ hdmi->hpd_gpiod = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
+ /* This will catch e.g. -EPROBE_DEFER */
+ if (IS_ERR(hdmi->hpd_gpiod)) {
+ ret = PTR_ERR(hdmi->hpd_gpiod);
+ DRM_DEV_ERROR(&pdev->dev, "failed to get hpd gpio: (%d)\n", ret);
+ goto fail;
+ }
+
+ if (!hdmi->hpd_gpiod)
+ DBG("failed to get HPD gpio");
+
+ if (hdmi->hpd_gpiod)
+ gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
+
pm_runtime_enable(&pdev->dev);
hdmi->workq = alloc_ordered_workqueue("msm_hdmi", 0);
@@ -429,20 +443,6 @@ static struct hdmi_platform_config hdmi_tx_8996_config = {
.hpd_freq = hpd_clk_freq_8x74,
};
-static const struct {
- const char *name;
- const bool output;
- const int value;
- const char *label;
-} msm_hdmi_gpio_pdata[] = {
- { "qcom,hdmi-tx-ddc-clk", true, 1, "HDMI_DDC_CLK" },
- { "qcom,hdmi-tx-ddc-data", true, 1, "HDMI_DDC_DATA" },
- { "qcom,hdmi-tx-hpd", false, 1, "HDMI_HPD" },
- { "qcom,hdmi-tx-mux-en", true, 1, "HDMI_MUX_EN" },
- { "qcom,hdmi-tx-mux-sel", true, 0, "HDMI_MUX_SEL" },
- { "qcom,hdmi-tx-mux-lpm", true, 1, "HDMI_MUX_LPM" },
-};
-
/*
* HDMI audio codec callbacks
*/
@@ -555,7 +555,7 @@ static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
struct hdmi_platform_config *hdmi_cfg;
struct hdmi *hdmi;
struct device_node *of_node = dev->of_node;
- int i, err;
+ int err;
hdmi_cfg = (struct hdmi_platform_config *)
of_device_get_match_data(dev);
@@ -567,42 +567,6 @@ static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
hdmi_cfg->mmio_name = "core_physical";
hdmi_cfg->qfprom_mmio_name = "qfprom_physical";
- for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
- const char *name = msm_hdmi_gpio_pdata[i].name;
- struct gpio_desc *gpiod;
-
- /*
- * We are fetching the GPIO lines "as is" since the connector
- * code is enabling and disabling the lines. Until that point
- * the power-on default value will be kept.
- */
- gpiod = devm_gpiod_get_optional(dev, name, GPIOD_ASIS);
- /* This will catch e.g. -PROBE_DEFER */
- if (IS_ERR(gpiod))
- return PTR_ERR(gpiod);
- if (!gpiod) {
- /* Try a second time, stripping down the name */
- char name3[32];
-
- /*
- * Try again after stripping out the "qcom,hdmi-tx"
- * prefix. This is mainly to match "hpd-gpios" used
- * in the upstream bindings.
- */
- if (sscanf(name, "qcom,hdmi-tx-%s", name3))
- gpiod = devm_gpiod_get_optional(dev, name3, GPIOD_ASIS);
- if (IS_ERR(gpiod))
- return PTR_ERR(gpiod);
- if (!gpiod)
- DBG("failed to get gpio: %s", name);
- }
- hdmi_cfg->gpios[i].gpiod = gpiod;
- if (gpiod)
- gpiod_set_consumer_name(gpiod, msm_hdmi_gpio_pdata[i].label);
- hdmi_cfg->gpios[i].output = msm_hdmi_gpio_pdata[i].output;
- hdmi_cfg->gpios[i].value = msm_hdmi_gpio_pdata[i].value;
- }
-
dev->platform_data = hdmi_cfg;
hdmi = msm_hdmi_init(to_platform_device(dev));
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 8d2706bec3b9..20f554312b17 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -19,17 +19,9 @@
#include "msm_drv.h"
#include "hdmi.xml.h"
-#define HDMI_MAX_NUM_GPIO 6
-
struct hdmi_phy;
struct hdmi_platform_config;
-struct hdmi_gpio_data {
- struct gpio_desc *gpiod;
- bool output;
- int value;
-};
-
struct hdmi_audio {
bool enabled;
struct hdmi_audio_infoframe infoframe;
@@ -61,6 +53,8 @@ struct hdmi {
struct clk **hpd_clks;
struct clk **pwr_clks;
+ struct gpio_desc *hpd_gpiod;
+
struct hdmi_phy *phy;
struct device *phy_dev;
@@ -109,9 +103,6 @@ struct hdmi_platform_config {
/* clks that need to be on for screen pwr (ie pixel clk): */
const char **pwr_clk_names;
int pwr_clk_cnt;
-
- /* gpio's: */
- struct hdmi_gpio_data gpios[HDMI_MAX_NUM_GPIO];
};
struct hdmi_bridge {
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
index c3a236bb952c..52ebe562ca9b 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
@@ -60,48 +60,6 @@ static void msm_hdmi_phy_reset(struct hdmi *hdmi)
}
}
-static int gpio_config(struct hdmi *hdmi, bool on)
-{
- const struct hdmi_platform_config *config = hdmi->config;
- int i;
-
- if (on) {
- for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
- struct hdmi_gpio_data gpio = config->gpios[i];
-
- if (gpio.gpiod) {
- if (gpio.output) {
- gpiod_direction_output(gpio.gpiod,
- gpio.value);
- } else {
- gpiod_direction_input(gpio.gpiod);
- gpiod_set_value_cansleep(gpio.gpiod,
- gpio.value);
- }
- }
- }
-
- DBG("gpio on");
- } else {
- for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
- struct hdmi_gpio_data gpio = config->gpios[i];
-
- if (!gpio.gpiod)
- continue;
-
- if (gpio.output) {
- int value = gpio.value ? 0 : 1;
-
- gpiod_set_value_cansleep(gpio.gpiod, value);
- }
- }
-
- DBG("gpio off");
- }
-
- return 0;
-}
-
static void enable_hpd_clocks(struct hdmi *hdmi, bool enable)
{
const struct hdmi_platform_config *config = hdmi->config;
@@ -157,11 +115,8 @@ int msm_hdmi_hpd_enable(struct drm_bridge *bridge)
goto fail;
}
- ret = gpio_config(hdmi, true);
- if (ret) {
- DRM_DEV_ERROR(dev, "failed to configure GPIOs: %d\n", ret);
- goto fail;
- }
+ if (hdmi->hpd_gpiod)
+ gpiod_set_value_cansleep(hdmi->hpd_gpiod, 1);
pm_runtime_get_sync(dev);
enable_hpd_clocks(hdmi, true);
@@ -210,10 +165,6 @@ void msm_hdmi_hpd_disable(struct hdmi_bridge *hdmi_bridge)
enable_hpd_clocks(hdmi, false);
pm_runtime_put_autosuspend(dev);
- ret = gpio_config(hdmi, false);
- if (ret)
- dev_warn(dev, "failed to unconfigure GPIOs: %d\n", ret);
-
ret = pinctrl_pm_select_sleep_state(dev);
if (ret)
dev_warn(dev, "pinctrl state chg failed: %d\n", ret);
@@ -275,10 +226,7 @@ static enum drm_connector_status detect_reg(struct hdmi *hdmi)
#define HPD_GPIO_INDEX 2
static enum drm_connector_status detect_gpio(struct hdmi *hdmi)
{
- const struct hdmi_platform_config *config = hdmi->config;
- struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX];
-
- return gpiod_get_value(hpd_gpio.gpiod) ?
+ return gpiod_get_value(hdmi->hpd_gpiod) ?
connector_status_connected :
connector_status_disconnected;
}
@@ -288,8 +236,6 @@ enum drm_connector_status msm_hdmi_bridge_detect(
{
struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
struct hdmi *hdmi = hdmi_bridge->hdmi;
- const struct hdmi_platform_config *config = hdmi->config;
- struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX];
enum drm_connector_status stat_gpio, stat_reg;
int retry = 20;
@@ -297,7 +243,7 @@ enum drm_connector_status msm_hdmi_bridge_detect(
* some platforms may not have hpd gpio. Rely only on the status
* provided by REG_HDMI_HPD_INT_STATUS in this case.
*/
- if (!hpd_gpio.gpiod)
+ if (!hdmi->hpd_gpiod)
return detect_reg(hdmi);
do {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 178/731] drm/msm/hdmi: use devres helper for runtime PM management
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (176 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 177/731] drm/msm/hdmi: drop unused GPIO support Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 179/731] bpf: Fix slot type check in check_stack_write_var_off Greg Kroah-Hartman
` (563 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Baryshkov, Abhinav Kumar,
Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit b964444b2b64ce182495731d830499d1c588ccf6 ]
Use devm_pm_runtime_enable() to enable runtime PM. This way its effect
will be reverted on device unbind/destruction.
Fixes: 6ed9ed484d04 ("drm/msm/hdmi: Set up runtime PM for HDMI")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499647/
Link: https://lore.kernel.org/r/20220826093927.851597-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index efb14043a6ec..e1a9b52d0a29 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -261,7 +261,7 @@ static struct hdmi *msm_hdmi_init(struct platform_device *pdev)
if (hdmi->hpd_gpiod)
gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
- pm_runtime_enable(&pdev->dev);
+ devm_pm_runtime_enable(&pdev->dev);
hdmi->workq = alloc_ordered_workqueue("msm_hdmi", 0);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 179/731] bpf: Fix slot type check in check_stack_write_var_off
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (177 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 178/731] drm/msm/hdmi: use devres helper for runtime PM management Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 180/731] media: vivid: fix compose size exceed boundary Greg Kroah-Hartman
` (562 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kumar Kartikeya Dwivedi,
Alexei Starovoitov, Sasha Levin
From: Kumar Kartikeya Dwivedi <memxor@gmail.com>
[ Upstream commit f5e477a861e4a20d8a1c5f7a245f3a3c3c376b03 ]
For the case where allow_ptr_leaks is false, code is checking whether
slot type is STACK_INVALID and STACK_SPILL and rejecting other cases.
This is a consequence of incorrectly checking for register type instead
of the slot type (NOT_INIT and SCALAR_VALUE respectively). Fix the
check.
Fixes: 01f810ace9ed ("bpf: Allow variable-offset stack access")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/bpf/verifier.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index cceb29b0585f..027ead3d0680 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2772,14 +2772,17 @@ static int check_stack_write_var_off(struct bpf_verifier_env *env,
spi = slot / BPF_REG_SIZE;
stype = &state->stack[spi].slot_type[slot % BPF_REG_SIZE];
- if (!env->allow_ptr_leaks
- && *stype != NOT_INIT
- && *stype != SCALAR_VALUE) {
- /* Reject the write if there's are spilled pointers in
- * range. If we didn't reject here, the ptr status
- * would be erased below (even though not all slots are
- * actually overwritten), possibly opening the door to
- * leaks.
+ if (!env->allow_ptr_leaks && *stype != STACK_MISC && *stype != STACK_ZERO) {
+ /* Reject the write if range we may write to has not
+ * been initialized beforehand. If we didn't reject
+ * here, the ptr status would be erased below (even
+ * though not all slots are actually overwritten),
+ * possibly opening the door to leaks.
+ *
+ * We do however catch STACK_INVALID case below, and
+ * only allow reading possibly uninitialized memory
+ * later for CAP_PERFMON, as the write may not happen to
+ * that slot.
*/
verbose(env, "spilled ptr in range of var-offset stack write; insn %d, ptr off: %d",
insn_idx, i);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 180/731] media: vivid: fix compose size exceed boundary
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (178 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 179/731] bpf: Fix slot type check in check_stack_write_var_off Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 181/731] media: platform: exynos4-is: fix return value check in fimc_md_probe() Greg Kroah-Hartman
` (561 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Liu Shixin, Hans Verkuil, Sasha Levin
From: Liu Shixin <liushixin2@huawei.com>
[ Upstream commit 94a7ad9283464b75b12516c5512541d467cefcf8 ]
syzkaller found a bug:
BUG: unable to handle page fault for address: ffffc9000a3b1000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10015f067 PMD 1121ca067 PTE 0
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 23489 Comm: vivid-000-vid-c Not tainted 6.1.0-rc1+ #512
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:memcpy_erms+0x6/0x10
[...]
Call Trace:
<TASK>
? tpg_fill_plane_buffer+0x856/0x15b0
vivid_fillbuff+0x8ac/0x1110
vivid_thread_vid_cap_tick+0x361/0xc90
vivid_thread_vid_cap+0x21a/0x3a0
kthread+0x143/0x180
ret_from_fork+0x1f/0x30
</TASK>
This is because we forget to check boundary after adjust compose->height
int V4L2_SEL_TGT_CROP case. Add v4l2_rect_map_inside() to fix this problem
for this case.
Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/test-drivers/vivid/vivid-vid-cap.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/test-drivers/vivid/vivid-vid-cap.c b/drivers/media/test-drivers/vivid/vivid-vid-cap.c
index 99139a8cd4c4..331a3f4286d2 100644
--- a/drivers/media/test-drivers/vivid/vivid-vid-cap.c
+++ b/drivers/media/test-drivers/vivid/vivid-vid-cap.c
@@ -961,6 +961,7 @@ int vivid_vid_cap_s_selection(struct file *file, void *fh, struct v4l2_selection
if (dev->has_compose_cap) {
v4l2_rect_set_min_size(compose, &min_rect);
v4l2_rect_set_max_size(compose, &max_rect);
+ v4l2_rect_map_inside(compose, &fmt);
}
dev->fmt_cap_rect = fmt;
tpg_s_buf_height(&dev->tpg, fmt.height);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 181/731] media: platform: exynos4-is: fix return value check in fimc_md_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (179 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 180/731] media: vivid: fix compose size exceed boundary Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 182/731] bpf: propagate precision in ALU/ALU64 operations Greg Kroah-Hartman
` (560 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Hans Verkuil, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit e38e42c078da4af962d322b97e726dcb2f184e3f ]
devm_pinctrl_get() may return ERR_PTR(-EPROBE_DEFER), add a minus sign
to fix it.
Fixes: 4163851f7b99 ("[media] s5p-fimc: Use pinctrl API for camera ports configuration")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/exynos4-is/media-dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index aa5982e32b2b..00225e16dd49 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -1472,7 +1472,7 @@ static int fimc_md_probe(struct platform_device *pdev)
pinctrl = devm_pinctrl_get(dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
- if (ret != EPROBE_DEFER)
+ if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get pinctrl: %d\n", ret);
goto err_clk;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 182/731] bpf: propagate precision in ALU/ALU64 operations
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (180 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 181/731] media: platform: exynos4-is: fix return value check in fimc_md_probe() Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 183/731] bpf: Check the other end of slot_type for STACK_SPILL Greg Kroah-Hartman
` (559 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrii Nakryiko, Alexei Starovoitov,
Sasha Levin
From: Andrii Nakryiko <andrii@kernel.org>
[ Upstream commit a3b666bfa9c9edc05bca62a87abafe0936bd7f97 ]
When processing ALU/ALU64 operations (apart from BPF_MOV, which is
handled correctly already; and BPF_NEG and BPF_END are special and don't
have source register), if destination register is already marked
precise, this causes problem with potentially missing precision tracking
for the source register. E.g., when we have r1 >>= r5 and r1 is marked
precise, but r5 isn't, this will lead to r5 staying as imprecise. This
is due to the precision backtracking logic stopping early when it sees
r1 is already marked precise. If r1 wasn't precise, we'd keep
backtracking and would add r5 to the set of registers that need to be
marked precise. So there is a discrepancy here which can lead to invalid
and incompatible states matched due to lack of precision marking on r5.
If r1 wasn't precise, precision backtracking would correctly mark both
r1 and r5 as precise.
This is simple to fix, though. During the forward instruction simulation
pass, for arithmetic operations of `scalar <op>= scalar` form (where
<op> is ALU or ALU64 operations), if destination register is already
precise, mark source register as precise. This applies only when both
involved registers are SCALARs. `ptr += scalar` and `scalar += ptr`
cases are already handled correctly.
This does have (negative) effect on some selftest programs and few
Cilium programs. ~/baseline-tmp-results.csv are veristat results with
this patch, while ~/baseline-results.csv is without it. See post
scriptum for instructions on how to make Cilium programs testable with
veristat. Correctness has a price.
$ ./veristat -C -e file,prog,insns,states ~/baseline-results.csv ~/baseline-tmp-results.csv | grep -v '+0'
File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF)
----------------------- -------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
bpf_cubic.bpf.linked1.o bpf_cubic_cong_avoid 997 1700 +703 (+70.51%) 62 90 +28 (+45.16%)
test_l4lb.bpf.linked1.o balancer_ingress 4559 5469 +910 (+19.96%) 118 126 +8 (+6.78%)
----------------------- -------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
$ ./veristat -C -e file,prog,verdict,insns,states ~/baseline-results-cilium.csv ~/baseline-tmp-results-cilium.csv | grep -v '+0'
File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF)
------------- ------------------------------ --------------- --------------- ------------------ ---------------- ---------------- -------------------
bpf_host.o tail_nodeport_nat_ingress_ipv6 4448 5261 +813 (+18.28%) 234 247 +13 (+5.56%)
bpf_host.o tail_nodeport_nat_ipv6_egress 3396 3446 +50 (+1.47%) 201 203 +2 (+1.00%)
bpf_lxc.o tail_nodeport_nat_ingress_ipv6 4448 5261 +813 (+18.28%) 234 247 +13 (+5.56%)
bpf_overlay.o tail_nodeport_nat_ingress_ipv6 4448 5261 +813 (+18.28%) 234 247 +13 (+5.56%)
bpf_xdp.o tail_lb_ipv4 71736 73442 +1706 (+2.38%) 4295 4370 +75 (+1.75%)
------------- ------------------------------ --------------- --------------- ------------------ ---------------- ---------------- -------------------
P.S. To make Cilium ([0]) programs libbpf-compatible and thus
veristat-loadable, apply changes from topmost commit in [1], which does
minimal changes to Cilium source code, mostly around SEC() annotations
and BPF map definitions.
[0] https://github.com/cilium/cilium/
[1] https://github.com/anakryiko/cilium/commits/libbpf-friendliness
Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/bpf/verifier.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 027ead3d0680..98d182dc848a 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -7998,6 +7998,11 @@ static int adjust_reg_min_max_vals(struct bpf_verifier_env *env,
return err;
return adjust_ptr_min_max_vals(env, insn,
dst_reg, src_reg);
+ } else if (dst_reg->precise) {
+ /* if dst_reg is precise, src_reg should be precise as well */
+ err = mark_chain_precision(env, insn->src_reg);
+ if (err)
+ return err;
}
} else {
/* Pretend the src is a reg with a known value, since we only
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 183/731] bpf: Check the other end of slot_type for STACK_SPILL
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (181 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 182/731] bpf: propagate precision in ALU/ALU64 operations Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 184/731] bpf: propagate precision across all frames, not just the last one Greg Kroah-Hartman
` (558 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Martin KaFai Lau,
Alexei Starovoitov, Sasha Levin
From: Martin KaFai Lau <kafai@fb.com>
[ Upstream commit 27113c59b6d0a587b29ae72d4ff3f832f58b0651 ]
Every 8 bytes of the stack is tracked by a bpf_stack_state.
Within each bpf_stack_state, there is a 'u8 slot_type[8]' to track
the type of each byte. Verifier tests slot_type[0] == STACK_SPILL
to decide if the spilled reg state is saved. Verifier currently only
saves the reg state if the whole 8 bytes are spilled to the stack,
so checking the slot_type[7] is the same as checking slot_type[0].
The later patch will allow verifier to save the bounded scalar
reg also for <8 bytes spill. There is a llvm patch [1] to ensure
the <8 bytes spill will be 8-byte aligned, so checking
slot_type[7] instead of slot_type[0] is required.
While at it, this patch refactors the slot_type[0] == STACK_SPILL
test into a new function is_spilled_reg() and change the
slot_type[0] check to slot_type[7] check in there also.
[1] https://reviews.llvm.org/D109073
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210922004934.624194-1-kafai@fb.com
Stable-dep-of: 529409ea92d5 ("bpf: propagate precision across all frames, not just the last one")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/bpf/verifier.c | 30 +++++++++++++++++++-----------
1 file changed, 19 insertions(+), 11 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 98d182dc848a..a0a1061eabb1 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -606,6 +606,14 @@ static const char *kernel_type_name(const struct btf* btf, u32 id)
return btf_name_by_offset(btf, btf_type_by_id(btf, id)->name_off);
}
+/* The reg state of a pointer or a bounded scalar was saved when
+ * it was spilled to the stack.
+ */
+static bool is_spilled_reg(const struct bpf_stack_state *stack)
+{
+ return stack->slot_type[BPF_REG_SIZE - 1] == STACK_SPILL;
+}
+
static void print_verifier_state(struct bpf_verifier_env *env,
const struct bpf_func_state *state)
{
@@ -709,7 +717,7 @@ static void print_verifier_state(struct bpf_verifier_env *env,
continue;
verbose(env, " fp%d", (-i - 1) * BPF_REG_SIZE);
print_liveness(env, state->stack[i].spilled_ptr.live);
- if (state->stack[i].slot_type[0] == STACK_SPILL) {
+ if (is_spilled_reg(&state->stack[i])) {
reg = &state->stack[i].spilled_ptr;
t = reg->type;
verbose(env, "=%s", reg_type_str(env, t));
@@ -2351,7 +2359,7 @@ static void mark_all_scalars_precise(struct bpf_verifier_env *env,
reg->precise = true;
}
for (j = 0; j < func->allocated_stack / BPF_REG_SIZE; j++) {
- if (func->stack[j].slot_type[0] != STACK_SPILL)
+ if (!is_spilled_reg(&func->stack[j]))
continue;
reg = &func->stack[j].spilled_ptr;
if (reg->type != SCALAR_VALUE)
@@ -2393,7 +2401,7 @@ static int __mark_chain_precision(struct bpf_verifier_env *env, int regno,
}
while (spi >= 0) {
- if (func->stack[spi].slot_type[0] != STACK_SPILL) {
+ if (!is_spilled_reg(&func->stack[spi])) {
stack_mask = 0;
break;
}
@@ -2492,7 +2500,7 @@ static int __mark_chain_precision(struct bpf_verifier_env *env, int regno,
return 0;
}
- if (func->stack[i].slot_type[0] != STACK_SPILL) {
+ if (!is_spilled_reg(&func->stack[i])) {
stack_mask &= ~(1ull << i);
continue;
}
@@ -2682,7 +2690,7 @@ static int check_stack_write_fixed_off(struct bpf_verifier_env *env,
/* regular write of data into stack destroys any spilled ptr */
state->stack[spi].spilled_ptr.type = NOT_INIT;
/* Mark slots as STACK_MISC if they belonged to spilled ptr. */
- if (state->stack[spi].slot_type[0] == STACK_SPILL)
+ if (is_spilled_reg(&state->stack[spi]))
for (i = 0; i < BPF_REG_SIZE; i++)
state->stack[spi].slot_type[i] = STACK_MISC;
@@ -2895,7 +2903,7 @@ static int check_stack_read_fixed_off(struct bpf_verifier_env *env,
stype = reg_state->stack[spi].slot_type;
reg = ®_state->stack[spi].spilled_ptr;
- if (stype[0] == STACK_SPILL) {
+ if (is_spilled_reg(®_state->stack[spi])) {
if (size != BPF_REG_SIZE) {
if (reg->type != SCALAR_VALUE) {
verbose_linfo(env, env->insn_idx, "; ");
@@ -4534,11 +4542,11 @@ static int check_stack_range_initialized(
goto mark;
}
- if (state->stack[spi].slot_type[0] == STACK_SPILL &&
+ if (is_spilled_reg(&state->stack[spi]) &&
state->stack[spi].spilled_ptr.type == PTR_TO_BTF_ID)
goto mark;
- if (state->stack[spi].slot_type[0] == STACK_SPILL &&
+ if (is_spilled_reg(&state->stack[spi]) &&
(state->stack[spi].spilled_ptr.type == SCALAR_VALUE ||
env->allow_ptr_leaks)) {
if (clobber) {
@@ -10342,9 +10350,9 @@ static bool stacksafe(struct bpf_verifier_env *env, struct bpf_func_state *old,
* return false to continue verification of this path
*/
return false;
- if (i % BPF_REG_SIZE)
+ if (i % BPF_REG_SIZE != BPF_REG_SIZE - 1)
continue;
- if (old->stack[spi].slot_type[0] != STACK_SPILL)
+ if (!is_spilled_reg(&old->stack[spi]))
continue;
if (!regsafe(env, &old->stack[spi].spilled_ptr,
&cur->stack[spi].spilled_ptr, idmap))
@@ -10551,7 +10559,7 @@ static int propagate_precision(struct bpf_verifier_env *env,
}
for (i = 0; i < state->allocated_stack / BPF_REG_SIZE; i++) {
- if (state->stack[i].slot_type[0] != STACK_SPILL)
+ if (!is_spilled_reg(&state->stack[i]))
continue;
state_reg = &state->stack[i].spilled_ptr;
if (state_reg->type != SCALAR_VALUE ||
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 184/731] bpf: propagate precision across all frames, not just the last one
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (182 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 183/731] bpf: Check the other end of slot_type for STACK_SPILL Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 185/731] clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs Greg Kroah-Hartman
` (557 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrii Nakryiko, Alexei Starovoitov,
Sasha Levin
From: Andrii Nakryiko <andrii@kernel.org>
[ Upstream commit 529409ea92d590659be487ba0839710329bd8074 ]
When equivalent completed state is found and it has additional precision
restrictions, BPF verifier propagates precision to
currently-being-verified state chain (i.e., including parent states) so
that if some of the states in the chain are not yet completed, necessary
precision restrictions are enforced.
Unfortunately, right now this happens only for the last frame (deepest
active subprogram's frame), not all the frames. This can lead to
incorrect matching of states due to missing precision marker. Currently
this doesn't seem possible as BPF verifier forces everything to precise
when validated BPF program has any subprograms. But with the next patch
lifting this restriction, this becomes problematic.
In fact, without this fix, we'll start getting failure in one of the
existing test_verifier test cases:
#906/p precise: cross frame pruning FAIL
Unexpected success to load!
verification time 48 usec
stack depth 0+0
processed 26 insns (limit 1000000) max_states_per_insn 3 total_states 17 peak_states 17 mark_read 8
This patch adds precision propagation across all frames.
Fixes: a3ce685dd01a ("bpf: fix precision tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/bpf/verifier.c | 71 ++++++++++++++++++++++++-------------------
1 file changed, 39 insertions(+), 32 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index a0a1061eabb1..b1ca4dbdeecf 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2369,7 +2369,7 @@ static void mark_all_scalars_precise(struct bpf_verifier_env *env,
}
}
-static int __mark_chain_precision(struct bpf_verifier_env *env, int regno,
+static int __mark_chain_precision(struct bpf_verifier_env *env, int frame, int regno,
int spi)
{
struct bpf_verifier_state *st = env->cur_state;
@@ -2386,7 +2386,7 @@ static int __mark_chain_precision(struct bpf_verifier_env *env, int regno,
if (!env->bpf_capable)
return 0;
- func = st->frame[st->curframe];
+ func = st->frame[frame];
if (regno >= 0) {
reg = &func->regs[regno];
if (reg->type != SCALAR_VALUE) {
@@ -2467,7 +2467,7 @@ static int __mark_chain_precision(struct bpf_verifier_env *env, int regno,
break;
new_marks = false;
- func = st->frame[st->curframe];
+ func = st->frame[frame];
bitmap_from_u64(mask, reg_mask);
for_each_set_bit(i, mask, 32) {
reg = &func->regs[i];
@@ -2533,12 +2533,17 @@ static int __mark_chain_precision(struct bpf_verifier_env *env, int regno,
static int mark_chain_precision(struct bpf_verifier_env *env, int regno)
{
- return __mark_chain_precision(env, regno, -1);
+ return __mark_chain_precision(env, env->cur_state->curframe, regno, -1);
}
-static int mark_chain_precision_stack(struct bpf_verifier_env *env, int spi)
+static int mark_chain_precision_frame(struct bpf_verifier_env *env, int frame, int regno)
{
- return __mark_chain_precision(env, -1, spi);
+ return __mark_chain_precision(env, frame, regno, -1);
+}
+
+static int mark_chain_precision_stack_frame(struct bpf_verifier_env *env, int frame, int spi)
+{
+ return __mark_chain_precision(env, frame, -1, spi);
}
static bool is_spillable_regtype(enum bpf_reg_type type)
@@ -10543,34 +10548,36 @@ static int propagate_precision(struct bpf_verifier_env *env,
{
struct bpf_reg_state *state_reg;
struct bpf_func_state *state;
- int i, err = 0;
+ int i, err = 0, fr;
- state = old->frame[old->curframe];
- state_reg = state->regs;
- for (i = 0; i < BPF_REG_FP; i++, state_reg++) {
- if (state_reg->type != SCALAR_VALUE ||
- !state_reg->precise)
- continue;
- if (env->log.level & BPF_LOG_LEVEL2)
- verbose(env, "propagating r%d\n", i);
- err = mark_chain_precision(env, i);
- if (err < 0)
- return err;
- }
+ for (fr = old->curframe; fr >= 0; fr--) {
+ state = old->frame[fr];
+ state_reg = state->regs;
+ for (i = 0; i < BPF_REG_FP; i++, state_reg++) {
+ if (state_reg->type != SCALAR_VALUE ||
+ !state_reg->precise)
+ continue;
+ if (env->log.level & BPF_LOG_LEVEL2)
+ verbose(env, "frame %d: propagating r%d\n", i, fr);
+ err = mark_chain_precision_frame(env, fr, i);
+ if (err < 0)
+ return err;
+ }
- for (i = 0; i < state->allocated_stack / BPF_REG_SIZE; i++) {
- if (!is_spilled_reg(&state->stack[i]))
- continue;
- state_reg = &state->stack[i].spilled_ptr;
- if (state_reg->type != SCALAR_VALUE ||
- !state_reg->precise)
- continue;
- if (env->log.level & BPF_LOG_LEVEL2)
- verbose(env, "propagating fp%d\n",
- (-i - 1) * BPF_REG_SIZE);
- err = mark_chain_precision_stack(env, i);
- if (err < 0)
- return err;
+ for (i = 0; i < state->allocated_stack / BPF_REG_SIZE; i++) {
+ if (!is_spilled_reg(&state->stack[i]))
+ continue;
+ state_reg = &state->stack[i].spilled_ptr;
+ if (state_reg->type != SCALAR_VALUE ||
+ !state_reg->precise)
+ continue;
+ if (env->log.level & BPF_LOG_LEVEL2)
+ verbose(env, "frame %d: propagating fp%d\n",
+ (-i - 1) * BPF_REG_SIZE, fr);
+ err = mark_chain_precision_stack_frame(env, fr, i);
+ if (err < 0)
+ return err;
+ }
}
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 185/731] clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (183 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 184/731] bpf: propagate precision across all frames, not just the last one Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 186/731] mtd: Fix device name leak when register device failed in add_mtd_device() Greg Kroah-Hartman
` (556 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Manivannan Sadhasivam,
Bjorn Andersson, Sasha Levin
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Upstream commit ac1c5a03d3772b1db25e8092f771aa33f6ae2f7e ]
USB controllers on SM8250 doesn't work after coming back from suspend.
This can be fixed by keeping the USB GDSCs in retention mode so that
hardware can keep them ON and put into rentention mode once the parent
domain goes to a low power state.
Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102091320.66007-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/qcom/gcc-sm8250.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/gcc-sm8250.c b/drivers/clk/qcom/gcc-sm8250.c
index 9755ef4888c1..a0ba37656b07 100644
--- a/drivers/clk/qcom/gcc-sm8250.c
+++ b/drivers/clk/qcom/gcc-sm8250.c
@@ -3267,7 +3267,7 @@ static struct gdsc usb30_prim_gdsc = {
.pd = {
.name = "usb30_prim_gdsc",
},
- .pwrsts = PWRSTS_OFF_ON,
+ .pwrsts = PWRSTS_RET_ON,
};
static struct gdsc usb30_sec_gdsc = {
@@ -3275,7 +3275,7 @@ static struct gdsc usb30_sec_gdsc = {
.pd = {
.name = "usb30_sec_gdsc",
},
- .pwrsts = PWRSTS_OFF_ON,
+ .pwrsts = PWRSTS_RET_ON,
};
static struct gdsc hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc = {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 186/731] mtd: Fix device name leak when register device failed in add_mtd_device()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (184 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 185/731] clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 187/731] Input: joystick - fix Kconfig warning for JOYSTICK_ADC Greg Kroah-Hartman
` (555 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Xiaoxu, Miquel Raynal, Sasha Levin
From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[ Upstream commit 895d68a39481a75c680aa421546931fb11942fa6 ]
There is a kmemleak when register device failed:
unreferenced object 0xffff888101aab550 (size 8):
comm "insmod", pid 3922, jiffies 4295277753 (age 925.408s)
hex dump (first 8 bytes):
6d 74 64 30 00 88 ff ff mtd0....
backtrace:
[<00000000bde26724>] __kmalloc_node_track_caller+0x4e/0x150
[<000000003c32b416>] kvasprintf+0xb0/0x130
[<000000001f7a8f15>] kobject_set_name_vargs+0x2f/0xb0
[<000000006e781163>] dev_set_name+0xab/0xe0
[<00000000e30d0c78>] add_mtd_device+0x4bb/0x700
[<00000000f3d34de7>] mtd_device_parse_register+0x2ac/0x3f0
[<00000000c0d88488>] 0xffffffffa0238457
[<00000000b40d0922>] 0xffffffffa02a008f
[<0000000023d17b9d>] do_one_initcall+0x87/0x2a0
[<00000000770f6ca6>] do_init_module+0xdf/0x320
[<000000007b6768fe>] load_module+0x2f98/0x3330
[<00000000346bed5a>] __do_sys_finit_module+0x113/0x1b0
[<00000000674c2290>] do_syscall_64+0x35/0x80
[<000000004c6a8d97>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
If register device failed, should call put_device() to give up the
reference.
Fixes: 1f24b5a8ecbb ("[MTD] driver model updates")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221022121352.2534682-1-zhangxiaoxu5@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/mtdcore.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 61f236e0378a..3abaac109e75 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -671,8 +671,10 @@ int add_mtd_device(struct mtd_info *mtd)
dev_set_drvdata(&mtd->dev, mtd);
of_node_get(mtd_get_of_node(mtd));
error = device_register(&mtd->dev);
- if (error)
+ if (error) {
+ put_device(&mtd->dev);
goto fail_added;
+ }
/* Add the nvmem provider */
error = mtd_nvmem_add(mtd);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 187/731] Input: joystick - fix Kconfig warning for JOYSTICK_ADC
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (185 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 186/731] mtd: Fix device name leak when register device failed in add_mtd_device() Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 188/731] wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port Greg Kroah-Hartman
` (554 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernel test robot, Randy Dunlap,
Dmitry Torokhov, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 6100a19c4fcfe154dd32f8a8ef4e8c0b1f607c75 ]
Fix a Kconfig warning for JOYSTICK_ADC by also selecting
IIO_BUFFER.
WARNING: unmet direct dependencies detected for IIO_BUFFER_CB
Depends on [n]: IIO [=y] && IIO_BUFFER [=n]
Selected by [y]:
- JOYSTICK_ADC [=y] && INPUT [=y] && INPUT_JOYSTICK [=y] && IIO [=y]
Fixes: 2c2b364fddd5 ("Input: joystick - add ADC attached joystick driver.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221104201238.31628-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/input/joystick/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 3b23078bc7b5..db4135bbd279 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -46,6 +46,7 @@ config JOYSTICK_A3D
config JOYSTICK_ADC
tristate "Simple joystick connected over ADC"
depends on IIO
+ select IIO_BUFFER
select IIO_BUFFER_CB
help
Say Y here if you have a simple joystick connected over ADC.
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 188/731] wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (186 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 187/731] Input: joystick - fix Kconfig warning for JOYSTICK_ADC Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 189/731] media: camss: Clean up received buffers on failed start of streaming Greg Kroah-Hartman
` (553 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Marek Vasut, Kalle Valo, Sasha Levin
From: Marek Vasut <marex@denx.de>
[ Upstream commit b8f6efccbb9dc0ff5dee7e20d69a4747298ee603 ]
When using wpa_supplicant v2.10, this driver is no longer able to
associate with any AP and fails in the EAPOL 4-way handshake while
sending the 2/4 message to the AP. The problem is not present in
wpa_supplicant v2.9 or older. The problem stems from HostAP commit
144314eaa ("wpa_supplicant: Send EAPOL frames over nl80211 where available")
which changes the way EAPOL frames are sent, from them being send
at L2 frames to them being sent via nl80211 control port.
An EAPOL frame sent as L2 frame is passed to the WiFi driver with
skb->protocol ETH_P_PAE, while EAPOL frame sent via nl80211 control
port has skb->protocol set to ETH_P_802_3 . The later happens in
ieee80211_tx_control_port(), where the EAPOL frame is encapsulated
into 802.3 frame.
The rsi_91x driver handles ETH_P_PAE EAPOL frames as high-priority
frames and sends them via highest-priority transmit queue, while
the ETH_P_802_3 frames are sent as regular frames. The EAPOL 4-way
handshake frames must be sent as highest-priority, otherwise the
4-way handshake times out.
Therefore, to fix this problem, inspect the skb control flags and
if flag IEEE80211_TX_CTRL_PORT_CTRL_PROTO is set, assume this is
an EAPOL frame and transmit the frame via high-priority queue just
like other ETH_P_PAE frames.
Fixes: 0eb42586cf87 ("rsi: data packet descriptor enhancements")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221104163339.227432-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/rsi/rsi_91x_core.c | 4 +++-
drivers/net/wireless/rsi/rsi_91x_hal.c | 6 +++++-
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_core.c b/drivers/net/wireless/rsi/rsi_91x_core.c
index 6bfaab48b507..6b64a103f39f 100644
--- a/drivers/net/wireless/rsi/rsi_91x_core.c
+++ b/drivers/net/wireless/rsi/rsi_91x_core.c
@@ -465,7 +465,9 @@ void rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb)
tid, 0);
}
}
- if (skb->protocol == cpu_to_be16(ETH_P_PAE)) {
+
+ if (IEEE80211_SKB_CB(skb)->control.flags &
+ IEEE80211_TX_CTRL_PORT_CTRL_PROTO) {
q_num = MGMT_SOFT_Q;
skb->priority = q_num;
}
diff --git a/drivers/net/wireless/rsi/rsi_91x_hal.c b/drivers/net/wireless/rsi/rsi_91x_hal.c
index dca81a4bbdd7..30d2eccbcadd 100644
--- a/drivers/net/wireless/rsi/rsi_91x_hal.c
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -162,12 +162,16 @@ int rsi_prepare_data_desc(struct rsi_common *common, struct sk_buff *skb)
u8 header_size;
u8 vap_id = 0;
u8 dword_align_bytes;
+ bool tx_eapol;
u16 seq_num;
info = IEEE80211_SKB_CB(skb);
vif = info->control.vif;
tx_params = (struct skb_info *)info->driver_data;
+ tx_eapol = IEEE80211_SKB_CB(skb)->control.flags &
+ IEEE80211_TX_CTRL_PORT_CTRL_PROTO;
+
header_size = FRAME_DESC_SZ + sizeof(struct rsi_xtended_desc);
if (header_size > skb_headroom(skb)) {
rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
@@ -231,7 +235,7 @@ int rsi_prepare_data_desc(struct rsi_common *common, struct sk_buff *skb)
}
}
- if (skb->protocol == cpu_to_be16(ETH_P_PAE)) {
+ if (tx_eapol) {
rsi_dbg(INFO_ZONE, "*** Tx EAPOL ***\n");
data_desc->frame_info = cpu_to_le16(RATE_INFO_ENABLE);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 189/731] media: camss: Clean up received buffers on failed start of streaming
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (187 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 188/731] wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 190/731] net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write() Greg Kroah-Hartman
` (552 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vladimir Zapolskiy, Robert Foss,
Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin
From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
[ Upstream commit c8f3582345e6a69da65ab588f7c4c2d1685b0e80 ]
It is required to return the received buffers, if streaming can not be
started. For instance media_pipeline_start() may fail with EPIPE, if
a link validation between entities is not passed, and in such a case
a user gets a kernel warning:
WARNING: CPU: 1 PID: 520 at drivers/media/common/videobuf2/videobuf2-core.c:1592 vb2_start_streaming+0xec/0x160
<snip>
Call trace:
vb2_start_streaming+0xec/0x160
vb2_core_streamon+0x9c/0x1a0
vb2_ioctl_streamon+0x68/0xbc
v4l_streamon+0x30/0x3c
__video_do_ioctl+0x184/0x3e0
video_usercopy+0x37c/0x7b0
video_ioctl2+0x24/0x40
v4l2_ioctl+0x4c/0x70
The fix is to correct the error path in video_start_streaming() of camss.
Fixes: 0ac2586c410f ("media: camss: Add files which handle the video device nodes")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/qcom/camss/camss-video.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
index f282275af626..5173b79995ee 100644
--- a/drivers/media/platform/qcom/camss/camss-video.c
+++ b/drivers/media/platform/qcom/camss/camss-video.c
@@ -493,7 +493,7 @@ static int video_start_streaming(struct vb2_queue *q, unsigned int count)
ret = media_pipeline_start(&vdev->entity, &video->pipe);
if (ret < 0)
- return ret;
+ goto flush_buffers;
ret = video_check_format(video);
if (ret < 0)
@@ -522,6 +522,7 @@ static int video_start_streaming(struct vb2_queue *q, unsigned int count)
error:
media_pipeline_stop(&vdev->entity);
+flush_buffers:
video->ops->flush_buffers(video, VB2_BUF_STATE_QUEUED);
return ret;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 190/731] net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (188 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 189/731] media: camss: Clean up received buffers on failed start of streaming Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 19:44 ` patchwork-bot+netdevbpf
2022-12-28 14:34 ` [PATCH 5.15 191/731] rxrpc: Fix ack.bufferSize to be 0 when generating an ack Greg Kroah-Hartman
` (551 subsequent siblings)
741 siblings, 1 reply; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernel test robot, David Howells,
Marc Dionne, linux-afs, netdev, Sasha Levin
From: David Howells <dhowells@redhat.com>
[ Upstream commit c3d96f690a790074b508fe183a41e36a00cd7ddd ]
Provide a CONFIG_PROC_FS=n fallback for proc_create_net_single_write().
Also provide a fallback for proc_create_net_data_write().
Fixes: 564def71765c ("proc: Add a way to make network proc files writable")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/proc_fs.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 069c7fd95396..a2f25b26ae1e 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -191,8 +191,10 @@ static inline void proc_remove(struct proc_dir_entry *de) {}
static inline int remove_proc_subtree(const char *name, struct proc_dir_entry *parent) { return 0; }
#define proc_create_net_data(name, mode, parent, ops, state_size, data) ({NULL;})
+#define proc_create_net_data_write(name, mode, parent, ops, write, state_size, data) ({NULL;})
#define proc_create_net(name, mode, parent, state_size, ops) ({NULL;})
#define proc_create_net_single(name, mode, parent, show, data) ({NULL;})
+#define proc_create_net_single_write(name, mode, parent, show, write, data) ({NULL;})
static inline struct pid *tgid_pidfd_to_pid(const struct file *file)
{
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 191/731] rxrpc: Fix ack.bufferSize to be 0 when generating an ack
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (189 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 190/731] net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write() Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 192/731] bfq: fix waker_bfqq inconsistency crash Greg Kroah-Hartman
` (550 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jeffrey Altman, David Howells,
Marc Dionne, linux-afs, Sasha Levin
From: David Howells <dhowells@redhat.com>
[ Upstream commit 8889a711f9b4dcf4dd1330fa493081beebd118c9 ]
ack.bufferSize should be set to 0 when generating an ack.
Fixes: 8d94aa381dab ("rxrpc: Calls shouldn't hold socket refs")
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/rxrpc/output.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/rxrpc/output.c b/net/rxrpc/output.c
index 9683617db704..08c117bc083e 100644
--- a/net/rxrpc/output.c
+++ b/net/rxrpc/output.c
@@ -93,7 +93,7 @@ static size_t rxrpc_fill_out_ack(struct rxrpc_connection *conn,
*_hard_ack = hard_ack;
*_top = top;
- pkt->ack.bufferSpace = htons(8);
+ pkt->ack.bufferSpace = htons(0);
pkt->ack.maxSkew = htons(0);
pkt->ack.firstPacket = htonl(hard_ack + 1);
pkt->ack.previousPacket = htonl(call->ackr_highest_seq);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 192/731] bfq: fix waker_bfqq inconsistency crash
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (190 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 191/731] rxrpc: Fix ack.bufferSize to be 0 when generating an ack Greg Kroah-Hartman
@ 2022-12-28 14:34 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 193/731] drm/radeon: Add the missed acpi_put_table() to fix memory leak Greg Kroah-Hartman
` (549 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:34 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Khazhismel Kumykov, Jan Kara,
Jens Axboe, Sasha Levin
From: Khazhismel Kumykov <khazhy@chromium.org>
[ Upstream commit a1795c2ccb1e4c49220d2a0d381540024d71647c ]
This fixes crashes in bfq_add_bfqq_busy due to waker_bfqq being NULL,
but woken_list_node still being hashed. This would happen when
bfq_init_rq() expects a brand new allocated queue to be returned from
bfq_get_bfqq_handle_split() and unconditionally updates waker_bfqq
without resetting woken_list_node. Since we can always return oom_bfqq
when attempting to allocate, we cannot assume waker_bfqq starts as NULL.
Avoid setting woken_bfqq for oom_bfqq entirely, as it's not useful.
Crashes would have a stacktrace like:
[160595.656560] bfq_add_bfqq_busy+0x110/0x1ec
[160595.661142] bfq_add_request+0x6bc/0x980
[160595.666602] bfq_insert_request+0x8ec/0x1240
[160595.671762] bfq_insert_requests+0x58/0x9c
[160595.676420] blk_mq_sched_insert_request+0x11c/0x198
[160595.682107] blk_mq_submit_bio+0x270/0x62c
[160595.686759] __submit_bio_noacct_mq+0xec/0x178
[160595.691926] submit_bio+0x120/0x184
[160595.695990] ext4_mpage_readpages+0x77c/0x7c8
[160595.701026] ext4_readpage+0x60/0xb0
[160595.705158] filemap_read_page+0x54/0x114
[160595.711961] filemap_fault+0x228/0x5f4
[160595.716272] do_read_fault+0xe0/0x1f0
[160595.720487] do_fault+0x40/0x1c8
Tested by injecting random failures into bfq_get_queue, crashes go away
completely.
Fixes: 8ef3fc3a043c ("block, bfq: make shared queues inherit wakers")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221108181030.1611703-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/bfq-iosched.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 7d8fe13573f6..f21b861a0d66 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -6630,6 +6630,12 @@ static struct bfq_queue *bfq_init_rq(struct request *rq)
bfqq = bfq_get_bfqq_handle_split(bfqd, bic, bio,
true, is_sync,
NULL);
+ if (unlikely(bfqq == &bfqd->oom_bfqq))
+ bfqq_already_existing = true;
+ } else
+ bfqq_already_existing = true;
+
+ if (!bfqq_already_existing) {
bfqq->waker_bfqq = old_bfqq->waker_bfqq;
bfqq->tentative_waker_bfqq = NULL;
@@ -6643,8 +6649,7 @@ static struct bfq_queue *bfq_init_rq(struct request *rq)
if (bfqq->waker_bfqq)
hlist_add_head(&bfqq->woken_list_node,
&bfqq->waker_bfqq->woken_list);
- } else
- bfqq_already_existing = true;
+ }
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 193/731] drm/radeon: Add the missed acpi_put_table() to fix memory leak
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (191 preceding siblings ...)
2022-12-28 14:34 ` [PATCH 5.15 192/731] bfq: fix waker_bfqq inconsistency crash Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 194/731] drm/mediatek: Modify dpi power on/off sequence Greg Kroah-Hartman
` (548 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Hanjun Guo, Alex Deucher, Sasha Levin
From: Hanjun Guo <guohanjun@huawei.com>
[ Upstream commit 10276a20be1115e1f76c189330da2992df980eee ]
When the radeon driver reads the bios information from ACPI
table in radeon_acpi_vfct_bios(), it misses to call acpi_put_table()
to release the ACPI memory after the init, so add acpi_put_table()
properly to fix the memory leak.
v2: fix text formatting (Alex)
Fixes: 268ba0a99f89 ("drm/radeon: implement ACPI VFCT vbios fetch (v3)")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/radeon/radeon_bios.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index 33121655d50b..1d99c9a2b56e 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -612,13 +612,14 @@ static bool radeon_acpi_vfct_bios(struct radeon_device *rdev)
acpi_size tbl_size;
UEFI_ACPI_VFCT *vfct;
unsigned offset;
+ bool r = false;
if (!ACPI_SUCCESS(acpi_get_table("VFCT", 1, &hdr)))
return false;
tbl_size = hdr->length;
if (tbl_size < sizeof(UEFI_ACPI_VFCT)) {
DRM_ERROR("ACPI VFCT table present but broken (too short #1)\n");
- return false;
+ goto out;
}
vfct = (UEFI_ACPI_VFCT *)hdr;
@@ -631,13 +632,13 @@ static bool radeon_acpi_vfct_bios(struct radeon_device *rdev)
offset += sizeof(VFCT_IMAGE_HEADER);
if (offset > tbl_size) {
DRM_ERROR("ACPI VFCT image header truncated\n");
- return false;
+ goto out;
}
offset += vhdr->ImageLength;
if (offset > tbl_size) {
DRM_ERROR("ACPI VFCT image truncated\n");
- return false;
+ goto out;
}
if (vhdr->ImageLength &&
@@ -649,15 +650,18 @@ static bool radeon_acpi_vfct_bios(struct radeon_device *rdev)
rdev->bios = kmemdup(&vbios->VbiosContent,
vhdr->ImageLength,
GFP_KERNEL);
+ if (rdev->bios)
+ r = true;
- if (!rdev->bios)
- return false;
- return true;
+ goto out;
}
}
DRM_ERROR("ACPI VFCT table present but broken (too short #2)\n");
- return false;
+
+out:
+ acpi_put_table(hdr);
+ return r;
}
#else
static inline bool radeon_acpi_vfct_bios(struct radeon_device *rdev)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 194/731] drm/mediatek: Modify dpi power on/off sequence.
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (192 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 193/731] drm/radeon: Add the missed acpi_put_table() to fix memory leak Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 195/731] ASoC: pxa: fix null-pointer dereference in filter() Greg Kroah-Hartman
` (547 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xinlei Lee, Chun-Kuang Hu, Sasha Levin
From: Xinlei Lee <xinlei.lee@mediatek.com>
[ Upstream commit ff446c0f6290185cefafe3b376bb86063a3a9f6a ]
Modify dpi power on/off sequence so that the first gpio operation will
take effect.
Fixes: 6bd4763fd532 ("drm/mediatek: set dpi pin mode to gpio low to avoid leakage current")
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/mediatek/mtk_dpi.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 41c783349321..94c6bd3b0082 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -387,9 +387,6 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
if (--dpi->refcount != 0)
return;
- if (dpi->pinctrl && dpi->pins_gpio)
- pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
-
mtk_dpi_disable(dpi);
clk_disable_unprepare(dpi->pixel_clk);
clk_disable_unprepare(dpi->engine_clk);
@@ -414,9 +411,6 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
goto err_pixel;
}
- if (dpi->pinctrl && dpi->pins_dpi)
- pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
-
return 0;
err_pixel:
@@ -630,12 +624,18 @@ static void mtk_dpi_bridge_disable(struct drm_bridge *bridge)
struct mtk_dpi *dpi = bridge_to_dpi(bridge);
mtk_dpi_power_off(dpi);
+
+ if (dpi->pinctrl && dpi->pins_gpio)
+ pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
}
static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
{
struct mtk_dpi *dpi = bridge_to_dpi(bridge);
+ if (dpi->pinctrl && dpi->pins_dpi)
+ pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
+
mtk_dpi_power_on(dpi);
mtk_dpi_set_display_mode(dpi, &dpi->mode);
mtk_dpi_enable(dpi);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 195/731] ASoC: pxa: fix null-pointer dereference in filter()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (193 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 194/731] drm/mediatek: Modify dpi power on/off sequence Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 196/731] libbpf: Fix uninitialized warning in btf_dump_dump_type_data Greg Kroah-Hartman
` (546 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zeng Heng, Mark Brown, Sasha Levin
From: Zeng Heng <zengheng4@huawei.com>
[ Upstream commit ec7bf231aaa1bdbcb69d23bc50c753c80fb22429 ]
kasprintf() would return NULL pointer when kmalloc() fail to allocate.
Need to check the return pointer before calling strcmp().
Fixes: 7a824e214e25 ("ASoC: mmp: add audio dma support")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20221114085629.1910435-1-zengheng4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/pxa/mmp-pcm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/pxa/mmp-pcm.c b/sound/soc/pxa/mmp-pcm.c
index 5d520e18e512..99b245e3079a 100644
--- a/sound/soc/pxa/mmp-pcm.c
+++ b/sound/soc/pxa/mmp-pcm.c
@@ -98,7 +98,7 @@ static bool filter(struct dma_chan *chan, void *param)
devname = kasprintf(GFP_KERNEL, "%s.%d", dma_data->dma_res->name,
dma_data->ssp_id);
- if ((strcmp(dev_name(chan->device->dev), devname) == 0) &&
+ if (devname && (strcmp(dev_name(chan->device->dev), devname) == 0) &&
(chan->chan_id == dma_data->dma_res->start)) {
found = true;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 196/731] libbpf: Fix uninitialized warning in btf_dump_dump_type_data
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (194 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 195/731] ASoC: pxa: fix null-pointer dereference in filter() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 197/731] nvmet: only allocate a single slab for bvecs Greg Kroah-Hartman
` (545 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, David Michael, Daniel Borkmann,
Stanislav Fomichev, Alan Maguire, Sasha Levin
From: David Michael <fedora.dm0@gmail.com>
[ Upstream commit dfd0afbf151d85411b371e841f62b81ee5d1ca54 ]
GCC 11.3.0 fails to compile btf_dump.c due to the following error,
which seems to originate in btf_dump_struct_data where the returned
value would be uninitialized if btf_vlen returns zero.
btf_dump.c: In function ‘btf_dump_dump_type_data’:
btf_dump.c:2363:12: error: ‘err’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2363 | if (err < 0)
| ^
Fixes: 920d16af9b42 ("libbpf: BTF dumper support for typed data")
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/87zgcu60hq.fsf@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/btf_dump.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index 9bcd75dc12cc..f620911ad3bb 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -1915,7 +1915,7 @@ static int btf_dump_struct_data(struct btf_dump *d,
{
const struct btf_member *m = btf_members(t);
__u16 n = btf_vlen(t);
- int i, err;
+ int i, err = 0;
/* note that we increment depth before calling btf_dump_print() below;
* this is intentional. btf_dump_data_newline() will not print a
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 197/731] nvmet: only allocate a single slab for bvecs
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (195 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 196/731] libbpf: Fix uninitialized warning in btf_dump_dump_type_data Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 198/731] regulator: core: fix unbalanced of node refcount in regulator_dev_lookup() Greg Kroah-Hartman
` (544 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christoph Hellwig, Keith Busch,
Sagi Grimberg, Chaitanya Kulkarni, Martin K. Petersen,
Sasha Levin
From: Christoph Hellwig <hch@lst.de>
[ Upstream commit fa8f9ac42350edd3ce82d0d148a60f0fa088f995 ]
There is no need to have a separate slab cache for each namespace,
and having separate ones creates duplicate debugs file names as well.
Fixes: d5eff33ee6f8 ("nvmet: add simple file backed ns support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/target/core.c | 22 ++++++++++++++--------
drivers/nvme/target/io-cmd-file.c | 16 +++-------------
drivers/nvme/target/nvmet.h | 3 ++-
3 files changed, 19 insertions(+), 22 deletions(-)
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 87a347248c38..cfd038551156 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -15,6 +15,7 @@
#include "nvmet.h"
+struct kmem_cache *nvmet_bvec_cache;
struct workqueue_struct *buffered_io_wq;
struct workqueue_struct *zbd_wq;
static const struct nvmet_fabrics_ops *nvmet_transports[NVMF_TRTYPE_MAX];
@@ -1607,26 +1608,28 @@ void nvmet_subsys_put(struct nvmet_subsys *subsys)
static int __init nvmet_init(void)
{
- int error;
+ int error = -ENOMEM;
nvmet_ana_group_enabled[NVMET_DEFAULT_ANA_GRPID] = 1;
+ nvmet_bvec_cache = kmem_cache_create("nvmet-bvec",
+ NVMET_MAX_MPOOL_BVEC * sizeof(struct bio_vec), 0,
+ SLAB_HWCACHE_ALIGN, NULL);
+ if (!nvmet_bvec_cache)
+ return -ENOMEM;
+
zbd_wq = alloc_workqueue("nvmet-zbd-wq", WQ_MEM_RECLAIM, 0);
if (!zbd_wq)
- return -ENOMEM;
+ goto out_destroy_bvec_cache;
buffered_io_wq = alloc_workqueue("nvmet-buffered-io-wq",
WQ_MEM_RECLAIM, 0);
- if (!buffered_io_wq) {
- error = -ENOMEM;
+ if (!buffered_io_wq)
goto out_free_zbd_work_queue;
- }
nvmet_wq = alloc_workqueue("nvmet-wq", WQ_MEM_RECLAIM, 0);
- if (!nvmet_wq) {
- error = -ENOMEM;
+ if (!nvmet_wq)
goto out_free_buffered_work_queue;
- }
error = nvmet_init_discovery();
if (error)
@@ -1645,6 +1648,8 @@ static int __init nvmet_init(void)
destroy_workqueue(buffered_io_wq);
out_free_zbd_work_queue:
destroy_workqueue(zbd_wq);
+out_destroy_bvec_cache:
+ kmem_cache_destroy(nvmet_bvec_cache);
return error;
}
@@ -1656,6 +1661,7 @@ static void __exit nvmet_exit(void)
destroy_workqueue(nvmet_wq);
destroy_workqueue(buffered_io_wq);
destroy_workqueue(zbd_wq);
+ kmem_cache_destroy(nvmet_bvec_cache);
BUILD_BUG_ON(sizeof(struct nvmf_disc_rsp_page_entry) != 1024);
BUILD_BUG_ON(sizeof(struct nvmf_disc_rsp_page_hdr) != 1024);
diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
index 228871d48106..eadba13b276d 100644
--- a/drivers/nvme/target/io-cmd-file.c
+++ b/drivers/nvme/target/io-cmd-file.c
@@ -11,7 +11,6 @@
#include <linux/fs.h>
#include "nvmet.h"
-#define NVMET_MAX_MPOOL_BVEC 16
#define NVMET_MIN_MPOOL_OBJ 16
int nvmet_file_ns_revalidate(struct nvmet_ns *ns)
@@ -33,8 +32,6 @@ void nvmet_file_ns_disable(struct nvmet_ns *ns)
flush_workqueue(buffered_io_wq);
mempool_destroy(ns->bvec_pool);
ns->bvec_pool = NULL;
- kmem_cache_destroy(ns->bvec_cache);
- ns->bvec_cache = NULL;
fput(ns->file);
ns->file = NULL;
}
@@ -68,16 +65,8 @@ int nvmet_file_ns_enable(struct nvmet_ns *ns)
ns->blksize_shift = min_t(u8,
file_inode(ns->file)->i_blkbits, 12);
- ns->bvec_cache = kmem_cache_create("nvmet-bvec",
- NVMET_MAX_MPOOL_BVEC * sizeof(struct bio_vec),
- 0, SLAB_HWCACHE_ALIGN, NULL);
- if (!ns->bvec_cache) {
- ret = -ENOMEM;
- goto err;
- }
-
ns->bvec_pool = mempool_create(NVMET_MIN_MPOOL_OBJ, mempool_alloc_slab,
- mempool_free_slab, ns->bvec_cache);
+ mempool_free_slab, nvmet_bvec_cache);
if (!ns->bvec_pool) {
ret = -ENOMEM;
@@ -86,9 +75,10 @@ int nvmet_file_ns_enable(struct nvmet_ns *ns)
return ret;
err:
+ fput(ns->file);
+ ns->file = NULL;
ns->size = 0;
ns->blksize_shift = 0;
- nvmet_file_ns_disable(ns);
return ret;
}
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index dbeb0b8c1194..fdb06a9d430d 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -77,7 +77,6 @@ struct nvmet_ns {
struct completion disable_done;
mempool_t *bvec_pool;
- struct kmem_cache *bvec_cache;
int use_p2pmem;
struct pci_dev *p2p_dev;
@@ -363,6 +362,8 @@ struct nvmet_req {
u64 error_slba;
};
+#define NVMET_MAX_MPOOL_BVEC 16
+extern struct kmem_cache *nvmet_bvec_cache;
extern struct workqueue_struct *buffered_io_wq;
extern struct workqueue_struct *zbd_wq;
extern struct workqueue_struct *nvmet_wq;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 198/731] regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (196 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 197/731] nvmet: only allocate a single slab for bvecs Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 199/731] amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table() Greg Kroah-Hartman
` (543 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Mark Brown, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit f2b41b748c19962b82709d9f23c6b2b0ce9d2f91 ]
I got the the following report:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /i2c/pmic@62/regulators/exten
In of_get_regulator(), the node is returned from of_parse_phandle()
with refcount incremented, after using it, of_node_put() need be called.
Fixes: 69511a452e6d ("regulator: map consumer regulator based on device tree")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221115091508.900752-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 221ae807b379..7bf85e0cce47 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1880,6 +1880,7 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
node = of_get_regulator(dev, supply);
if (node) {
r = of_find_regulator_by_node(node);
+ of_node_put(node);
if (r)
return r;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 199/731] amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (197 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 198/731] regulator: core: fix unbalanced of node refcount in regulator_dev_lookup() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 200/731] nvme: return err on nvme_init_non_mdts_limits fail Greg Kroah-Hartman
` (542 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dan Carpenter, Alex Deucher, Sasha Levin
From: Dan Carpenter <error27@gmail.com>
[ Upstream commit d27252b5706e51188aed7647126e44dcf9e940c1 ]
In the PP_OD_EDIT_VDDC_CURVE case the "input_index" variable is capped at
2 but not checked for negative values so it results in an out of bounds
read. This value comes from the user via sysfs.
Fixes: d5bf26539494 ("drm/amd/powerplay: added vega20 overdrive support V3")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c
index 85d55ab4e369..299b5c838bf7 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c
@@ -2961,7 +2961,8 @@ static int vega20_odn_edit_dpm_table(struct pp_hwmgr *hwmgr,
data->od8_settings.od8_settings_array;
OverDriveTable_t *od_table =
&(data->smc_state_table.overdrive_table);
- int32_t input_index, input_clk, input_vol, i;
+ int32_t input_clk, input_vol, i;
+ uint32_t input_index;
int od8_id;
int ret;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 200/731] nvme: return err on nvme_init_non_mdts_limits fail
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (198 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 199/731] amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 201/731] regulator: qcom-rpmh: Fix PMR735a S3 regulator spec Greg Kroah-Hartman
` (541 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Joel Granados, Chaitanya Kulkarni,
Christoph Hellwig, Sasha Levin
From: Joel Granados <j.granados@samsung.com>
[ Upstream commit bcaf434b8f04e1ee82a8b1e1bce0de99fbff67fa ]
In nvme_init_non_mdts_limits function we were returning 0 when kzalloc
failed; it now returns -ENOMEM.
Fixes: 5befc7c26e5a ("nvme: implement non-mdts command limits")
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/host/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 692ee0f4a1ec..2d5b5e0fb66a 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2874,7 +2874,7 @@ static int nvme_init_non_mdts_limits(struct nvme_ctrl *ctrl)
id = kzalloc(sizeof(*id), GFP_KERNEL);
if (!id)
- return 0;
+ return -ENOMEM;
c.identify.opcode = nvme_admin_identify;
c.identify.cns = NVME_ID_CNS_CS_CTRL;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 201/731] regulator: qcom-rpmh: Fix PMR735a S3 regulator spec
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (199 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 200/731] nvme: return err on nvme_init_non_mdts_limits fail Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 202/731] drm/fourcc: Add packed 10bit YUV 4:2:0 format Greg Kroah-Hartman
` (540 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Konrad Dybcio, Mark Brown, Sasha Levin
From: Konrad Dybcio <konrad.dybcio@linaro.org>
[ Upstream commit dd801b2265c81bf0c8b0b4b8f7c1e7bfed078403 ]
PMR735a has a wider range than previously defined. Fix it.
Fixes: c4e5aa3dbee5 ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221110210706.80301-1-konrad.dybcio@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/qcom-rpmh-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 7f458d510483..27efdbbd90d9 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1108,7 +1108,7 @@ static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps520, "vdd-s1"),
RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps520, "vdd-s2"),
- RPMH_VREG("smps3", "smp%s3", &pmic5_hfsmps510, "vdd-s3"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_hfsmps515, "vdd-s3"),
RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l2"),
RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l1-l2"),
RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 202/731] drm/fourcc: Add packed 10bit YUV 4:2:0 format
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (200 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 201/731] regulator: qcom-rpmh: Fix PMR735a S3 regulator spec Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 203/731] drm/fourcc: Fix vsub/hsub for Q410 and Q401 Greg Kroah-Hartman
` (539 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dave Stevenson, Maxime Ripard,
Thomas Zimmermann, Sasha Levin
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
[ Upstream commit 006ea1b5822f9019bd722ffc6242bc0880879e3d ]
Adds a format that is 3 10bit YUV 4:2:0 samples packed into
a 32bit word (with 2 spare bits).
Supported on Broadcom BCM2711 chips.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20211215091739.135042-2-maxime@cerno.tech
Stable-dep-of: b230555f3257 ("drm/fourcc: Fix vsub/hsub for Q410 and Q401")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_fourcc.c | 3 +++
include/uapi/drm/drm_fourcc.h | 11 +++++++++++
2 files changed, 14 insertions(+)
diff --git a/drivers/gpu/drm/drm_fourcc.c b/drivers/gpu/drm/drm_fourcc.c
index eda832f9200d..aa747111476f 100644
--- a/drivers/gpu/drm/drm_fourcc.c
+++ b/drivers/gpu/drm/drm_fourcc.c
@@ -266,6 +266,9 @@ const struct drm_format_info *__drm_format_info(u32 format)
.num_planes = 3, .char_per_block = { 2, 2, 2 },
.block_w = { 1, 1, 1 }, .block_h = { 1, 1, 1 }, .hsub = 0,
.vsub = 0, .is_yuv = true },
+ { .format = DRM_FORMAT_P030, .depth = 0, .num_planes = 2,
+ .char_per_block = { 4, 8, 0 }, .block_w = { 3, 3, 0 }, .block_h = { 1, 1, 0 },
+ .hsub = 2, .vsub = 2, .is_yuv = true},
};
unsigned int i;
diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
index 808c73c52820..a50e4646bd6d 100644
--- a/include/uapi/drm/drm_fourcc.h
+++ b/include/uapi/drm/drm_fourcc.h
@@ -308,6 +308,13 @@ extern "C" {
*/
#define DRM_FORMAT_P016 fourcc_code('P', '0', '1', '6') /* 2x2 subsampled Cr:Cb plane 16 bits per channel */
+/* 2 plane YCbCr420.
+ * 3 10 bit components and 2 padding bits packed into 4 bytes.
+ * index 0 = Y plane, [31:0] x:Y2:Y1:Y0 2:10:10:10 little endian
+ * index 1 = Cr:Cb plane, [63:0] x:Cr2:Cb2:Cr1:x:Cb1:Cr0:Cb0 [2:10:10:10:2:10:10:10] little endian
+ */
+#define DRM_FORMAT_P030 fourcc_code('P', '0', '3', '0') /* 2x2 subsampled Cr:Cb plane 10 bits per channel packed */
+
/* 3 plane non-subsampled (444) YCbCr
* 16 bits per component, but only 10 bits are used and 6 bits are padded
* index 0: Y plane, [15:0] Y:x [10:6] little endian
@@ -842,6 +849,10 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier)
* and UV. Some SAND-using hardware stores UV in a separate tiled
* image from Y to reduce the column height, which is not supported
* with these modifiers.
+ *
+ * The DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT modifier is also
+ * supported for DRM_FORMAT_P030 where the columns remain as 128 bytes
+ * wide, but as this is a 10 bpp format that translates to 96 pixels.
*/
#define DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(v) \
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 203/731] drm/fourcc: Fix vsub/hsub for Q410 and Q401
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (201 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 202/731] drm/fourcc: Add packed 10bit YUV 4:2:0 format Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 204/731] integrity: Fix memory leakage in keyring allocation error path Greg Kroah-Hartman
` (538 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, George Kennedy, butt3rflyh4ck,
Brian Starkey, Liviu Dudau, Sasha Levin
From: Brian Starkey <brian.starkey@arm.com>
[ Upstream commit b230555f3257f197dd98641ef6ebaf778b52dd51 ]
These formats are not subsampled, but that means hsub and vsub should be
1, not 0.
Fixes: 94b292b27734 ("drm: drm_fourcc: add NV15, Q410, Q401 YUV formats")
Reported-by: George Kennedy <george.kennedy@oracle.com>
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913144306.17279-1-brian.starkey@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_fourcc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/drm_fourcc.c b/drivers/gpu/drm/drm_fourcc.c
index aa747111476f..32ee023aed26 100644
--- a/drivers/gpu/drm/drm_fourcc.c
+++ b/drivers/gpu/drm/drm_fourcc.c
@@ -260,12 +260,12 @@ const struct drm_format_info *__drm_format_info(u32 format)
.vsub = 2, .is_yuv = true },
{ .format = DRM_FORMAT_Q410, .depth = 0,
.num_planes = 3, .char_per_block = { 2, 2, 2 },
- .block_w = { 1, 1, 1 }, .block_h = { 1, 1, 1 }, .hsub = 0,
- .vsub = 0, .is_yuv = true },
+ .block_w = { 1, 1, 1 }, .block_h = { 1, 1, 1 }, .hsub = 1,
+ .vsub = 1, .is_yuv = true },
{ .format = DRM_FORMAT_Q401, .depth = 0,
.num_planes = 3, .char_per_block = { 2, 2, 2 },
- .block_w = { 1, 1, 1 }, .block_h = { 1, 1, 1 }, .hsub = 0,
- .vsub = 0, .is_yuv = true },
+ .block_w = { 1, 1, 1 }, .block_h = { 1, 1, 1 }, .hsub = 1,
+ .vsub = 1, .is_yuv = true },
{ .format = DRM_FORMAT_P030, .depth = 0, .num_planes = 2,
.char_per_block = { 4, 8, 0 }, .block_w = { 3, 3, 0 }, .block_h = { 1, 1, 0 },
.hsub = 2, .vsub = 2, .is_yuv = true},
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 204/731] integrity: Fix memory leakage in keyring allocation error path
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (202 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 203/731] drm/fourcc: Fix vsub/hsub for Q410 and Q401 Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 205/731] ima: Fix misuse of dereference of pointer in template_desc_init_fields() Greg Kroah-Hartman
` (537 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, GUO Zihua, Mimi Zohar, Sasha Levin
From: GUO Zihua <guozihua@huawei.com>
[ Upstream commit 39419ef7af0916cc3620ecf1ed42d29659109bf3 ]
Key restriction is allocated in integrity_init_keyring(). However, if
keyring allocation failed, it is not freed, causing memory leaks.
Fixes: 2b6aa412ff23 ("KEYS: Use structure to capture key restriction function and data")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/integrity/digsig.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/security/integrity/digsig.c b/security/integrity/digsig.c
index 3b06a01bd0fd..aa93b750a9f3 100644
--- a/security/integrity/digsig.c
+++ b/security/integrity/digsig.c
@@ -122,6 +122,7 @@ int __init integrity_init_keyring(const unsigned int id)
{
struct key_restriction *restriction;
key_perm_t perm;
+ int ret;
perm = (KEY_POS_ALL & ~KEY_POS_SETATTR) | KEY_USR_VIEW
| KEY_USR_READ | KEY_USR_SEARCH;
@@ -142,7 +143,10 @@ int __init integrity_init_keyring(const unsigned int id)
perm |= KEY_USR_WRITE;
out:
- return __integrity_init_keyring(id, perm, restriction);
+ ret = __integrity_init_keyring(id, perm, restriction);
+ if (ret)
+ kfree(restriction);
+ return ret;
}
static int __init integrity_add_key(const unsigned int id, const void *data,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 205/731] ima: Fix misuse of dereference of pointer in template_desc_init_fields()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (203 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 204/731] integrity: Fix memory leakage in keyring allocation error path Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 206/731] block: clear ->slave_dir when dropping the main slave_dir reference Greg Kroah-Hartman
` (536 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiu Jianfeng, Roberto Sassu,
Mimi Zohar, Sasha Levin
From: Xiu Jianfeng <xiujianfeng@huawei.com>
[ Upstream commit 25369175ce84813dd99d6604e710dc2491f68523 ]
The input parameter @fields is type of struct ima_template_field ***, so
when allocates array memory for @fields, the size of element should be
sizeof(**field) instead of sizeof(*field).
Actually the original code would not cause any runtime error, but it's
better to make it logically right.
Fixes: adf53a778a0a ("ima: new templates management mechanism")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/integrity/ima/ima_template.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/security/integrity/ima/ima_template.c b/security/integrity/ima/ima_template.c
index db1ad6d7a57f..f84a0598e4f6 100644
--- a/security/integrity/ima/ima_template.c
+++ b/security/integrity/ima/ima_template.c
@@ -241,11 +241,11 @@ int template_desc_init_fields(const char *template_fmt,
}
if (fields && num_fields) {
- *fields = kmalloc_array(i, sizeof(*fields), GFP_KERNEL);
+ *fields = kmalloc_array(i, sizeof(**fields), GFP_KERNEL);
if (*fields == NULL)
return -ENOMEM;
- memcpy(*fields, found_fields, i * sizeof(*fields));
+ memcpy(*fields, found_fields, i * sizeof(**fields));
*num_fields = i;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 206/731] block: clear ->slave_dir when dropping the main slave_dir reference
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (204 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 205/731] ima: Fix misuse of dereference of pointer in template_desc_init_fields() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 207/731] wifi: ath10k: Fix return value in ath10k_pci_init() Greg Kroah-Hartman
` (535 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yu Kuai, Christoph Hellwig,
Mike Snitzer, Jens Axboe, Sasha Levin
From: Christoph Hellwig <hch@lst.de>
[ Upstream commit d90db3b1c8676bc88b4309c5a571333de2263b8e ]
Zero out the pointer to ->slave_dir so that the holder code doesn't
incorrectly treat the object as alive when add_disk failed or after
del_gendisk was called.
Fixes: 89f871af1b26 ("dm: delay registering the gendisk")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/genhd.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/block/genhd.c b/block/genhd.c
index 68065189ca17..a1d9e785dcf7 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -530,6 +530,7 @@ int device_add_disk(struct device *parent, struct gendisk *disk,
rq_qos_exit(disk->queue);
out_put_slave_dir:
kobject_put(disk->slave_dir);
+ disk->slave_dir = NULL;
out_put_holder_dir:
kobject_put(disk->part0->bd_holder_dir);
out_del_integrity:
@@ -624,6 +625,7 @@ void del_gendisk(struct gendisk *disk)
kobject_put(disk->part0->bd_holder_dir);
kobject_put(disk->slave_dir);
+ disk->slave_dir = NULL;
part_stat_set_all(disk->part0, 0);
disk->part0->bd_stamp = 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 207/731] wifi: ath10k: Fix return value in ath10k_pci_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (205 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 206/731] block: clear ->slave_dir when dropping the main slave_dir reference Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 208/731] drm/msm/a6xx: Fix speed-bin detection vs probe-defer Greg Kroah-Hartman
` (534 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiu Jianfeng, Jeff Johnson,
Kalle Valo, Sasha Levin
From: Xiu Jianfeng <xiujianfeng@huawei.com>
[ Upstream commit 2af7749047d8d6ad43feff69f555a13a6a6c2831 ]
This driver is attempting to register to support two different buses.
if either of these is successful then ath10k_pci_init() should return 0
so that hardware attached to the successful bus can be probed and
supported. only if both of these are unsuccessful should ath10k_pci_init()
return an errno.
Fixes: 0b523ced9a3c ("ath10k: add basic skeleton to support ahb")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221110061926.18163-1-xiujianfeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/pci.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 4d4e2f91e15c..85a30c301dad 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3793,18 +3793,22 @@ static struct pci_driver ath10k_pci_driver = {
static int __init ath10k_pci_init(void)
{
- int ret;
+ int ret1, ret2;
- ret = pci_register_driver(&ath10k_pci_driver);
- if (ret)
+ ret1 = pci_register_driver(&ath10k_pci_driver);
+ if (ret1)
printk(KERN_ERR "failed to register ath10k pci driver: %d\n",
- ret);
+ ret1);
- ret = ath10k_ahb_init();
- if (ret)
- printk(KERN_ERR "ahb init failed: %d\n", ret);
+ ret2 = ath10k_ahb_init();
+ if (ret2)
+ printk(KERN_ERR "ahb init failed: %d\n", ret2);
- return ret;
+ if (ret1 && ret2)
+ return ret1;
+
+ /* registered to at least one bus */
+ return 0;
}
module_init(ath10k_pci_init);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 208/731] drm/msm/a6xx: Fix speed-bin detection vs probe-defer
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (206 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 207/731] wifi: ath10k: Fix return value in ath10k_pci_init() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 209/731] mtd: lpddr2_nvm: Fix possible null-ptr-deref Greg Kroah-Hartman
` (533 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rob Clark, Douglas Anderson,
Akhil P Oommen, Sasha Levin
From: Rob Clark <robdclark@chromium.org>
[ Upstream commit f6d1918794ef92b4e26b80c3d40365347b76b1fd ]
If we get an error (other than -ENOENT) we need to propagate that up the
stack. Otherwise if the nvmem driver hasn't probed yet, we'll end up
end up claiming that we support all the OPPs which is not likely to be
true (and on some generations impossible to be true, ie. if there are
conflicting OPPs).
v2: Update commit msg, gc unused label, etc
v3: Add previously missing \n's
Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511690/
Link: https://lore.kernel.org/r/20221115154637.1613968-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index c0dec5b919d4..2d07c02c59f1 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -1746,7 +1746,7 @@ static u32 fuse_to_supp_hw(struct device *dev, struct adreno_rev rev, u32 fuse)
if (val == UINT_MAX) {
DRM_DEV_ERROR(dev,
- "missing support for speed-bin: %u. Some OPPs may not be supported by hardware",
+ "missing support for speed-bin: %u. Some OPPs may not be supported by hardware\n",
fuse);
return UINT_MAX;
}
@@ -1756,7 +1756,7 @@ static u32 fuse_to_supp_hw(struct device *dev, struct adreno_rev rev, u32 fuse)
static int a6xx_set_supported_hw(struct device *dev, struct adreno_rev rev)
{
- u32 supp_hw = UINT_MAX;
+ u32 supp_hw;
u32 speedbin;
int ret;
@@ -1768,15 +1768,13 @@ static int a6xx_set_supported_hw(struct device *dev, struct adreno_rev rev)
if (ret == -ENOENT) {
return 0;
} else if (ret) {
- DRM_DEV_ERROR(dev,
- "failed to read speed-bin (%d). Some OPPs may not be supported by hardware",
- ret);
- goto done;
+ dev_err_probe(dev, ret,
+ "failed to read speed-bin. Some OPPs may not be supported by hardware\n");
+ return ret;
}
supp_hw = fuse_to_supp_hw(dev, rev, speedbin);
-done:
ret = devm_pm_opp_set_supported_hw(dev, &supp_hw, 1);
if (ret)
return ret;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 209/731] mtd: lpddr2_nvm: Fix possible null-ptr-deref
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (207 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 208/731] drm/msm/a6xx: Fix speed-bin detection vs probe-defer Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 210/731] Input: elants_i2c - properly handle the reset GPIO when power is off Greg Kroah-Hartman
` (532 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hui Tang, Uwe Kleine-König,
Miquel Raynal, Sasha Levin
From: Hui Tang <tanghui20@huawei.com>
[ Upstream commit 6bdd45d795adf9e73b38ced5e7f750cd199499ff ]
It will cause null-ptr-deref when resource_size(add_range) invoked,
if platform_get_resource() returns NULL.
Fixes: 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221114090240.244172-1-tanghui20@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/lpddr/lpddr2_nvm.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mtd/lpddr/lpddr2_nvm.c b/drivers/mtd/lpddr/lpddr2_nvm.c
index 72f5c7b30079..add4386f99f0 100644
--- a/drivers/mtd/lpddr/lpddr2_nvm.c
+++ b/drivers/mtd/lpddr/lpddr2_nvm.c
@@ -433,6 +433,8 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
/* lpddr2_nvm address range */
add_range = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!add_range)
+ return -ENODEV;
/* Populate map_info data structure */
*map = (struct map_info) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 210/731] Input: elants_i2c - properly handle the reset GPIO when power is off
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (208 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 209/731] mtd: lpddr2_nvm: Fix possible null-ptr-deref Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 211/731] media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init() Greg Kroah-Hartman
` (531 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Douglas Anderson, Dmitry Torokhov,
Sasha Levin
From: Douglas Anderson <dianders@chromium.org>
[ Upstream commit a85fbd6498441694475716a4d5c65f9d3e073faf ]
As can be seen in elants_i2c_power_off(), we want the reset GPIO
asserted when power is off. The reset GPIO is active low so we need
the reset line logic low when power is off to avoid leakage.
We have a problem, though, at probe time. At probe time we haven't
powered the regulators on yet but we have:
devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
While that _looks_ right, it turns out that it's not. The
GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the
GPIO to "not asserted". Since this is an active low GPIO that inits it
to be high.
Let's fix this to properly init the GPIO. Now after both probe and
power off the state of the GPIO is consistent (it's "asserted" or
level low).
Once we fix this, we can see that at power on time we no longer to
assert the reset GPIO as the first thing. The reset GPIO is _always_
asserted before powering on. Let's fix powering on to account for
this.
Fixes: afe10358e47a ("Input: elants_i2c - wire up regulator support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/input/touchscreen/elants_i2c.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index b9e2219efbb8..6858a3e20a0c 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -1329,14 +1329,12 @@ static int elants_i2c_power_on(struct elants_data *ts)
if (IS_ERR_OR_NULL(ts->reset_gpio))
return 0;
- gpiod_set_value_cansleep(ts->reset_gpio, 1);
-
error = regulator_enable(ts->vcc33);
if (error) {
dev_err(&ts->client->dev,
"failed to enable vcc33 regulator: %d\n",
error);
- goto release_reset_gpio;
+ return error;
}
error = regulator_enable(ts->vccio);
@@ -1345,7 +1343,7 @@ static int elants_i2c_power_on(struct elants_data *ts)
"failed to enable vccio regulator: %d\n",
error);
regulator_disable(ts->vcc33);
- goto release_reset_gpio;
+ return error;
}
/*
@@ -1354,7 +1352,6 @@ static int elants_i2c_power_on(struct elants_data *ts)
*/
udelay(ELAN_POWERON_DELAY_USEC);
-release_reset_gpio:
gpiod_set_value_cansleep(ts->reset_gpio, 0);
if (error)
return error;
@@ -1462,7 +1459,7 @@ static int elants_i2c_probe(struct i2c_client *client)
return error;
}
- ts->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
+ ts->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ts->reset_gpio)) {
error = PTR_ERR(ts->reset_gpio);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 211/731] media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (209 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 210/731] Input: elants_i2c - properly handle the reset GPIO when power is off Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 212/731] media: solo6x10: fix possible memory leak in solo_sysfs_init() Greg Kroah-Hartman
` (530 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen Zhongjin, Hans Verkuil, Sasha Levin
From: Chen Zhongjin <chenzhongjin@huawei.com>
[ Upstream commit ba8d9405935097e296bcf7a942c3a01df0edb865 ]
KASAN reports a use-after-free:
BUG: KASAN: use-after-free in dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core]
Call Trace:
...
dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core]
vidtv_bridge_probe+0x7bf/0xa40 [dvb_vidtv_bridge]
platform_probe+0xb6/0x170
...
Allocated by task 1238:
...
dvb_register_device+0x1a7/0xa70 [dvb_core]
dvb_dmxdev_init+0x2af/0x4a0 [dvb_core]
vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge]
...
Freed by task 1238:
dvb_register_device+0x6d2/0xa70 [dvb_core]
dvb_dmxdev_init+0x2af/0x4a0 [dvb_core]
vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge]
...
It is because the error handling in vidtv_bridge_dvb_init() is wrong.
First, vidtv_bridge_dmx(dev)_init() will clean themselves when fail, but
goto fail_dmx(_dev): calls release functions again, which causes
use-after-free.
Also, in fail_fe, fail_tuner_probe and fail_demod_probe, j = i will cause
out-of-bound when i finished its loop (i == NUM_FE). And the loop
releasing is wrong, although now NUM_FE is 1 so it won't cause problem.
Fix this by correctly releasing everything.
Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../media/test-drivers/vidtv/vidtv_bridge.c | 22 +++++++------------
1 file changed, 8 insertions(+), 14 deletions(-)
diff --git a/drivers/media/test-drivers/vidtv/vidtv_bridge.c b/drivers/media/test-drivers/vidtv/vidtv_bridge.c
index 82620613d56b..dff7265a42ca 100644
--- a/drivers/media/test-drivers/vidtv/vidtv_bridge.c
+++ b/drivers/media/test-drivers/vidtv/vidtv_bridge.c
@@ -459,26 +459,20 @@ static int vidtv_bridge_dvb_init(struct vidtv_dvb *dvb)
for (j = j - 1; j >= 0; --j)
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx,
&dvb->dmx_fe[j]);
-fail_dmx_dev:
dvb_dmxdev_release(&dvb->dmx_dev);
-fail_dmx:
+fail_dmx_dev:
dvb_dmx_release(&dvb->demux);
+fail_dmx:
+fail_demod_probe:
+ for (i = i - 1; i >= 0; --i) {
+ dvb_unregister_frontend(dvb->fe[i]);
fail_fe:
- for (j = i; j >= 0; --j)
- dvb_unregister_frontend(dvb->fe[j]);
+ dvb_module_release(dvb->i2c_client_tuner[i]);
fail_tuner_probe:
- for (j = i; j >= 0; --j)
- if (dvb->i2c_client_tuner[j])
- dvb_module_release(dvb->i2c_client_tuner[j]);
-
-fail_demod_probe:
- for (j = i; j >= 0; --j)
- if (dvb->i2c_client_demod[j])
- dvb_module_release(dvb->i2c_client_demod[j]);
-
+ dvb_module_release(dvb->i2c_client_demod[i]);
+ }
fail_adapter:
dvb_unregister_adapter(&dvb->adapter);
-
fail_i2c:
i2c_del_adapter(&dvb->i2c_adapter);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 212/731] media: solo6x10: fix possible memory leak in solo_sysfs_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (210 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 211/731] media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 213/731] media: platform: exynos4-is: Fix error handling in fimc_md_init() Greg Kroah-Hartman
` (529 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Hans Verkuil, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 7f5866dd96d95b74e439f6ee17b8abd8195179fb ]
If device_register() returns error in solo_sysfs_init(), the
name allocated by dev_set_name() need be freed. As comment of
device_register() says, it should use put_device() to give up
the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup().
Fixes: dcae5dacbce5 ("[media] solo6x10: sync to latest code from Bluecherry's git repo")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/pci/solo6x10/solo6x10-core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/pci/solo6x10/solo6x10-core.c b/drivers/media/pci/solo6x10/solo6x10-core.c
index 4a546eeefe38..6d87fbb0ee04 100644
--- a/drivers/media/pci/solo6x10/solo6x10-core.c
+++ b/drivers/media/pci/solo6x10/solo6x10-core.c
@@ -420,6 +420,7 @@ static int solo_sysfs_init(struct solo_dev *solo_dev)
solo_dev->nr_chans);
if (device_register(dev)) {
+ put_device(dev);
dev->parent = NULL;
return -ENOMEM;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 213/731] media: platform: exynos4-is: Fix error handling in fimc_md_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (211 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 212/731] media: solo6x10: fix possible memory leak in solo_sysfs_init() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 214/731] media: videobuf-dma-contig: use dma_mmap_coherent Greg Kroah-Hartman
` (528 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yuan Can, Hans Verkuil, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit b434422c45282a0573d8123239abc41fa72665d4 ]
A problem about modprobe s5p_fimc failed is triggered with the
following log given:
[ 272.075275] Error: Driver 'exynos4-fimc' is already registered, aborting...
modprobe: ERROR: could not insert 's5p_fimc': Device or resource busy
The reason is that fimc_md_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without unregister fimc_driver, resulting the
s5p_fimc can never be installed later.
A simple call graph is shown as below:
fimc_md_init()
fimc_register_driver() # register fimc_driver
platform_driver_register()
platform_driver_register()
driver_register()
bus_add_driver()
dev = kzalloc(...) # OOM happened
# return without unregister fimc_driver
Fix by unregister fimc_driver when platform_driver_register() returns
error.
Fixes: d3953223b090 ("[media] s5p-fimc: Add the media device driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/exynos4-is/fimc-core.c | 2 +-
drivers/media/platform/exynos4-is/media-dev.c | 6 +++++-
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/exynos4-is/fimc-core.c b/drivers/media/platform/exynos4-is/fimc-core.c
index bfdee771cef9..4afe0b9b1773 100644
--- a/drivers/media/platform/exynos4-is/fimc-core.c
+++ b/drivers/media/platform/exynos4-is/fimc-core.c
@@ -1174,7 +1174,7 @@ int __init fimc_register_driver(void)
return platform_driver_register(&fimc_driver);
}
-void __exit fimc_unregister_driver(void)
+void fimc_unregister_driver(void)
{
platform_driver_unregister(&fimc_driver);
}
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 00225e16dd49..b19d7c8ddc06 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -1584,7 +1584,11 @@ static int __init fimc_md_init(void)
if (ret)
return ret;
- return platform_driver_register(&fimc_md_driver);
+ ret = platform_driver_register(&fimc_md_driver);
+ if (ret)
+ fimc_unregister_driver();
+
+ return ret;
}
static void __exit fimc_md_exit(void)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 214/731] media: videobuf-dma-contig: use dma_mmap_coherent
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (212 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 213/731] media: platform: exynos4-is: Fix error handling in fimc_md_init() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 215/731] inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict() Greg Kroah-Hartman
` (527 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Christoph Hellwig, Sasha Levin
From: Christoph Hellwig <hch@lst.de>
[ Upstream commit b3dc3f8e49577840dc8ac8a365c5b3da4edb10b8 ]
dma_alloc_coherent does not return a physical address, but a DMA address,
which might be remapped or have an offset. Passing the DMA address to
vm_iomap_memory is thus broken.
Use the proper dma_mmap_coherent helper instead, and stop passing
__GFP_COMP to dma_alloc_coherent, as the memory management inside the
DMA allocator is hidden from the callers and does not require it.
With this the gfp_t argument to __videobuf_dc_alloc can be removed and
hard coded to GFP_KERNEL.
Fixes: a8f3c203e19b ("[media] videobuf-dma-contig: add cache support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/v4l2-core/videobuf-dma-contig.c | 22 +++++++------------
1 file changed, 8 insertions(+), 14 deletions(-)
diff --git a/drivers/media/v4l2-core/videobuf-dma-contig.c b/drivers/media/v4l2-core/videobuf-dma-contig.c
index 52312ce2ba05..f2c439359557 100644
--- a/drivers/media/v4l2-core/videobuf-dma-contig.c
+++ b/drivers/media/v4l2-core/videobuf-dma-contig.c
@@ -36,12 +36,11 @@ struct videobuf_dma_contig_memory {
static int __videobuf_dc_alloc(struct device *dev,
struct videobuf_dma_contig_memory *mem,
- unsigned long size, gfp_t flags)
+ unsigned long size)
{
mem->size = size;
- mem->vaddr = dma_alloc_coherent(dev, mem->size,
- &mem->dma_handle, flags);
-
+ mem->vaddr = dma_alloc_coherent(dev, mem->size, &mem->dma_handle,
+ GFP_KERNEL);
if (!mem->vaddr) {
dev_err(dev, "memory alloc size %ld failed\n", mem->size);
return -ENOMEM;
@@ -258,8 +257,7 @@ static int __videobuf_iolock(struct videobuf_queue *q,
return videobuf_dma_contig_user_get(mem, vb);
/* allocate memory for the read() method */
- if (__videobuf_dc_alloc(q->dev, mem, PAGE_ALIGN(vb->size),
- GFP_KERNEL))
+ if (__videobuf_dc_alloc(q->dev, mem, PAGE_ALIGN(vb->size)))
return -ENOMEM;
break;
case V4L2_MEMORY_OVERLAY:
@@ -295,22 +293,18 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q,
BUG_ON(!mem);
MAGIC_CHECK(mem->magic, MAGIC_DC_MEM);
- if (__videobuf_dc_alloc(q->dev, mem, PAGE_ALIGN(buf->bsize),
- GFP_KERNEL | __GFP_COMP))
+ if (__videobuf_dc_alloc(q->dev, mem, PAGE_ALIGN(buf->bsize)))
goto error;
- /* Try to remap memory */
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
/* the "vm_pgoff" is just used in v4l2 to find the
* corresponding buffer data structure which is allocated
* earlier and it does not mean the offset from the physical
* buffer start address as usual. So set it to 0 to pass
- * the sanity check in vm_iomap_memory().
+ * the sanity check in dma_mmap_coherent().
*/
vma->vm_pgoff = 0;
-
- retval = vm_iomap_memory(vma, mem->dma_handle, mem->size);
+ retval = dma_mmap_coherent(q->dev, vma, mem->vaddr, mem->dma_handle,
+ mem->size);
if (retval) {
dev_err(q->dev, "mmap: remap failed with error %d. ",
retval);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 215/731] inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (213 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 214/731] media: videobuf-dma-contig: use dma_mmap_coherent Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 216/731] mtd: spi-nor: hide jedec_id sysfs attribute if not present Greg Kroah-Hartman
` (526 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eric Dumazet, David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit d2c135619cb89d1d5693df81ab408c5e8e97e898 ]
inet_csk_bind_conflict() can access sk->sk_bound_dev_if for
unlocked sockets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/inet_connection_sock.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index a53f9bf7886f..8039097546de 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -155,10 +155,14 @@ static int inet_csk_bind_conflict(const struct sock *sk,
*/
sk_for_each_bound(sk2, &tb->owners) {
- if (sk != sk2 &&
- (!sk->sk_bound_dev_if ||
- !sk2->sk_bound_dev_if ||
- sk->sk_bound_dev_if == sk2->sk_bound_dev_if)) {
+ int bound_dev_if2;
+
+ if (sk == sk2)
+ continue;
+ bound_dev_if2 = READ_ONCE(sk2->sk_bound_dev_if);
+ if ((!sk->sk_bound_dev_if ||
+ !bound_dev_if2 ||
+ sk->sk_bound_dev_if == bound_dev_if2)) {
if (reuse && sk2->sk_reuse &&
sk2->sk_state != TCP_LISTEN) {
if ((!relax ||
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 216/731] mtd: spi-nor: hide jedec_id sysfs attribute if not present
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (214 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 215/731] inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 217/731] mtd: spi-nor: Fix the number of bytes for the dummy cycles Greg Kroah-Hartman
` (525 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michael Walle, Tudor Ambarus,
Takahiro Kuwano, Sasha Levin
From: Michael Walle <michael@walle.cc>
[ Upstream commit 7d388551b6888f3725e6c957f472526b35161a5b ]
Some non-jedec compliant flashes (like the Everspin flashes) don't have
an ID at all. Hide the attribute in this case.
Fixes: 36ac02286265 ("mtd: spi-nor: add initial sysfs support")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/20220810220654.1297699-2-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../ABI/testing/sysfs-bus-spi-devices-spi-nor | 3 +++
drivers/mtd/spi-nor/sysfs.c | 14 ++++++++++++++
2 files changed, 17 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor b/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
index d76cd3946434..e9ef69aef20b 100644
--- a/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
+++ b/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
@@ -5,6 +5,9 @@ Contact: linux-mtd@lists.infradead.org
Description: (RO) The JEDEC ID of the SPI NOR flash as reported by the
flash device.
+ The attribute is not present if the flash doesn't support
+ the "Read JEDEC ID" command (9Fh). This is the case for
+ non-JEDEC compliant flashes.
What: /sys/bus/spi/devices/.../spi-nor/manufacturer
Date: April 2021
diff --git a/drivers/mtd/spi-nor/sysfs.c b/drivers/mtd/spi-nor/sysfs.c
index 9aec9d8a98ad..4c3b351aef24 100644
--- a/drivers/mtd/spi-nor/sysfs.c
+++ b/drivers/mtd/spi-nor/sysfs.c
@@ -67,6 +67,19 @@ static struct bin_attribute *spi_nor_sysfs_bin_entries[] = {
NULL
};
+static umode_t spi_nor_sysfs_is_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct spi_device *spi = to_spi_device(kobj_to_dev(kobj));
+ struct spi_mem *spimem = spi_get_drvdata(spi);
+ struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+
+ if (attr == &dev_attr_jedec_id.attr && !nor->info->id_len)
+ return 0;
+
+ return 0444;
+}
+
static umode_t spi_nor_sysfs_is_bin_visible(struct kobject *kobj,
struct bin_attribute *attr, int n)
{
@@ -82,6 +95,7 @@ static umode_t spi_nor_sysfs_is_bin_visible(struct kobject *kobj,
static const struct attribute_group spi_nor_sysfs_group = {
.name = "spi-nor",
+ .is_visible = spi_nor_sysfs_is_visible,
.is_bin_visible = spi_nor_sysfs_is_bin_visible,
.attrs = spi_nor_sysfs_entries,
.bin_attrs = spi_nor_sysfs_bin_entries,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 217/731] mtd: spi-nor: Fix the number of bytes for the dummy cycles
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (215 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 216/731] mtd: spi-nor: hide jedec_id sysfs attribute if not present Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 218/731] bpf: Move skb->len == 0 checks into __bpf_redirect Greg Kroah-Hartman
` (524 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bayi Cheng, Allen-KH Cheng,
Tudor Ambarus, Dhruva Gole, AngeloGioacchino Del Regno,
Pratyush Yadav, Sasha Levin
From: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
[ Upstream commit fdc20370d93e8c6d2f448a539d08c2c064af7694 ]
The number of bytes used by spi_nor_spimem_check_readop() may be
incorrect for the dummy cycles. Since nor->read_dummy is not initialized
before spi_nor_spimem_adjust_hwcaps().
We use both mode and wait state clock cycles instead of nor->read_dummy.
Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol")
Co-developed-by: Bayi Cheng <bayi.cheng@mediatek.com>
Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20221031124633.13189-1-allen-kh.cheng@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/spi-nor/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index eb5d7b3d1860..aad7076ae020 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2155,7 +2155,8 @@ static int spi_nor_spimem_check_readop(struct spi_nor *nor,
spi_nor_spimem_setup_op(nor, &op, read->proto);
/* convert the dummy cycles to the number of bytes */
- op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
+ op.dummy.nbytes = (read->num_mode_clocks + read->num_wait_states) *
+ op.dummy.buswidth / 8;
if (spi_nor_protocol_is_dtr(nor->read_proto))
op.dummy.nbytes *= 2;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 218/731] bpf: Move skb->len == 0 checks into __bpf_redirect
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (216 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 217/731] mtd: spi-nor: Fix the number of bytes for the dummy cycles Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 219/731] HID: hid-sensor-custom: set fixed size for custom attributes Greg Kroah-Hartman
` (523 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stanislav Fomichev,
Martin KaFai Lau, Sasha Levin
From: Stanislav Fomichev <sdf@google.com>
[ Upstream commit 114039b342014680911c35bd6b72624180fd669a ]
To avoid potentially breaking existing users.
Both mac/no-mac cases have to be amended; mac_header >= network_header
is not enough (verified with a new test, see next patch).
Fixes: fd1894224407 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221121180340.1983627-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bpf/test_run.c | 3 ---
net/core/filter.c | 7 ++++++-
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c
index 7583ee98c35b..11d254ce3581 100644
--- a/net/bpf/test_run.c
+++ b/net/bpf/test_run.c
@@ -470,9 +470,6 @@ static int convert___skb_to_skb(struct sk_buff *skb, struct __sk_buff *__skb)
{
struct qdisc_skb_cb *cb = (struct qdisc_skb_cb *)skb->cb;
- if (!skb->len)
- return -EINVAL;
-
if (!__skb)
return 0;
diff --git a/net/core/filter.c b/net/core/filter.c
index fb5b9dbf3bc0..68b1509e6188 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2123,6 +2123,11 @@ static int __bpf_redirect_no_mac(struct sk_buff *skb, struct net_device *dev,
{
unsigned int mlen = skb_network_offset(skb);
+ if (unlikely(skb->len <= mlen)) {
+ kfree_skb(skb);
+ return -ERANGE;
+ }
+
if (mlen) {
__skb_pull(skb, mlen);
@@ -2144,7 +2149,7 @@ static int __bpf_redirect_common(struct sk_buff *skb, struct net_device *dev,
u32 flags)
{
/* Verify that a link layer header is carried */
- if (unlikely(skb->mac_header >= skb->network_header)) {
+ if (unlikely(skb->mac_header >= skb->network_header || skb->len == 0)) {
kfree_skb(skb);
return -ERANGE;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 219/731] HID: hid-sensor-custom: set fixed size for custom attributes
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (217 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 218/731] bpf: Move skb->len == 0 checks into __bpf_redirect Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 220/731] pinctrl: k210: call of_node_put() Greg Kroah-Hartman
` (522 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marcus Folkesson, Jonathan Cameron,
Jiri Kosina, Sasha Levin
From: Marcus Folkesson <marcus.folkesson@gmail.com>
[ Upstream commit 9d013910df22de91333a0acc81d1dbb115bd76f6 ]
This is no bugfix (so no Fixes: tag is necessary) as it is
taken care of in hid_sensor_custom_add_attributes().
The motivation for this patch is that:
hid_sensor_custom_field.attr_name and
hid_sensor_custom_field.attrs
has the size of HID_CUSTOM_TOTAL_ATTRS and used in same context.
We compare against HID_CUSTOM_TOTAL_ATTRS when
looping through hid_custom_attrs.
We will silent the smatch error:
hid_sensor_custom_add_attributes() error: buffer overflow
'hid_custom_attrs' 8 <= 10
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-sensor-custom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hid/hid-sensor-custom.c b/drivers/hid/hid-sensor-custom.c
index 32c2306e240d..602465ad2745 100644
--- a/drivers/hid/hid-sensor-custom.c
+++ b/drivers/hid/hid-sensor-custom.c
@@ -62,7 +62,7 @@ struct hid_sensor_sample {
u32 raw_len;
} __packed;
-static struct attribute hid_custom_attrs[] = {
+static struct attribute hid_custom_attrs[HID_CUSTOM_TOTAL_ATTRS] = {
{.name = "name", .mode = S_IRUGO},
{.name = "units", .mode = S_IRUGO},
{.name = "unit-expo", .mode = S_IRUGO},
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 220/731] pinctrl: k210: call of_node_put()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (218 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 219/731] HID: hid-sensor-custom: set fixed size for custom attributes Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 221/731] ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT Greg Kroah-Hartman
` (521 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, ZhangPeng, Damien Le Moal,
Linus Walleij, Sasha Levin
From: ZhangPeng <zhangpeng362@huawei.com>
[ Upstream commit a8acc11643082a706de86a19f1f824712d971984 ]
Since for_each_available_child_of_node() will increase the refcount of
node, we need to call of_node_put() manually when breaking out of the
iteration.
Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221122075853.2496680-1-zhangpeng362@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/pinctrl-k210.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-k210.c b/drivers/pinctrl/pinctrl-k210.c
index ecab6bf63dc6..ad4db99094a7 100644
--- a/drivers/pinctrl/pinctrl-k210.c
+++ b/drivers/pinctrl/pinctrl-k210.c
@@ -862,8 +862,10 @@ static int k210_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
for_each_available_child_of_node(np_config, np) {
ret = k210_pinctrl_dt_subnode_to_map(pctldev, np, map,
&reserved_maps, num_maps);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(np);
goto err;
+ }
}
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 221/731] ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (219 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 220/731] pinctrl: k210: call of_node_put() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 222/731] ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT Greg Kroah-Hartman
` (520 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Baisong Zhong, Takashi Iwai, Sasha Levin
From: Baisong Zhong <zhongbaisong@huawei.com>
[ Upstream commit b5172e62458f8e6ff359e5f096044a488db90ac5 ]
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in sound/core/pcm_native.c:2676:21
left shift of 1 by 31 places cannot be represented in type 'int'
...
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xcf
ubsan_epilogue+0xa/0x44
__ubsan_handle_shift_out_of_bounds+0x1e7/0x208
snd_pcm_open_substream+0x9f0/0xa90
snd_pcm_oss_open.part.26+0x313/0x670
snd_pcm_oss_open+0x30/0x40
soundcore_open+0x18b/0x2e0
chrdev_open+0xe2/0x270
do_dentry_open+0x2f7/0x620
path_openat+0xd66/0xe70
do_filp_open+0xe3/0x170
do_sys_openat2+0x357/0x4a0
do_sys_open+0x87/0xd0
do_syscall_64+0x34/0x80
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Link: https://lore.kernel.org/r/20221121110044.3115686-1-zhongbaisong@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/sound/pcm.h | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index e08bf475d02d..181df0452ae2 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -106,24 +106,24 @@ struct snd_pcm_ops {
#define SNDRV_PCM_POS_XRUN ((snd_pcm_uframes_t)-1)
/* If you change this don't forget to change rates[] table in pcm_native.c */
-#define SNDRV_PCM_RATE_5512 (1<<0) /* 5512Hz */
-#define SNDRV_PCM_RATE_8000 (1<<1) /* 8000Hz */
-#define SNDRV_PCM_RATE_11025 (1<<2) /* 11025Hz */
-#define SNDRV_PCM_RATE_16000 (1<<3) /* 16000Hz */
-#define SNDRV_PCM_RATE_22050 (1<<4) /* 22050Hz */
-#define SNDRV_PCM_RATE_32000 (1<<5) /* 32000Hz */
-#define SNDRV_PCM_RATE_44100 (1<<6) /* 44100Hz */
-#define SNDRV_PCM_RATE_48000 (1<<7) /* 48000Hz */
-#define SNDRV_PCM_RATE_64000 (1<<8) /* 64000Hz */
-#define SNDRV_PCM_RATE_88200 (1<<9) /* 88200Hz */
-#define SNDRV_PCM_RATE_96000 (1<<10) /* 96000Hz */
-#define SNDRV_PCM_RATE_176400 (1<<11) /* 176400Hz */
-#define SNDRV_PCM_RATE_192000 (1<<12) /* 192000Hz */
-#define SNDRV_PCM_RATE_352800 (1<<13) /* 352800Hz */
-#define SNDRV_PCM_RATE_384000 (1<<14) /* 384000Hz */
-
-#define SNDRV_PCM_RATE_CONTINUOUS (1<<30) /* continuous range */
-#define SNDRV_PCM_RATE_KNOT (1<<31) /* supports more non-continuos rates */
+#define SNDRV_PCM_RATE_5512 (1U<<0) /* 5512Hz */
+#define SNDRV_PCM_RATE_8000 (1U<<1) /* 8000Hz */
+#define SNDRV_PCM_RATE_11025 (1U<<2) /* 11025Hz */
+#define SNDRV_PCM_RATE_16000 (1U<<3) /* 16000Hz */
+#define SNDRV_PCM_RATE_22050 (1U<<4) /* 22050Hz */
+#define SNDRV_PCM_RATE_32000 (1U<<5) /* 32000Hz */
+#define SNDRV_PCM_RATE_44100 (1U<<6) /* 44100Hz */
+#define SNDRV_PCM_RATE_48000 (1U<<7) /* 48000Hz */
+#define SNDRV_PCM_RATE_64000 (1U<<8) /* 64000Hz */
+#define SNDRV_PCM_RATE_88200 (1U<<9) /* 88200Hz */
+#define SNDRV_PCM_RATE_96000 (1U<<10) /* 96000Hz */
+#define SNDRV_PCM_RATE_176400 (1U<<11) /* 176400Hz */
+#define SNDRV_PCM_RATE_192000 (1U<<12) /* 192000Hz */
+#define SNDRV_PCM_RATE_352800 (1U<<13) /* 352800Hz */
+#define SNDRV_PCM_RATE_384000 (1U<<14) /* 384000Hz */
+
+#define SNDRV_PCM_RATE_CONTINUOUS (1U<<30) /* continuous range */
+#define SNDRV_PCM_RATE_KNOT (1U<<31) /* supports more non-continuos rates */
#define SNDRV_PCM_RATE_8000_44100 (SNDRV_PCM_RATE_8000|SNDRV_PCM_RATE_11025|\
SNDRV_PCM_RATE_16000|SNDRV_PCM_RATE_22050|\
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 222/731] ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (220 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 221/731] ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 223/731] regulator: core: use kfree_const() to free space conditionally Greg Kroah-Hartman
` (519 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Baisong Zhong, Takashi Iwai, Sasha Levin
From: Baisong Zhong <zhongbaisong@huawei.com>
[ Upstream commit cf59e1e4c79bf741905484cdb13c130b53576a16 ]
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in sound/core/seq/seq_clientmgr.c:509:22
left shift of 1 by 31 places cannot be represented in type 'int'
...
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xcf
ubsan_epilogue+0xa/0x44
__ubsan_handle_shift_out_of_bounds+0x1e7/0x208
snd_seq_deliver_single_event.constprop.21+0x191/0x2f0
snd_seq_deliver_event+0x1a2/0x350
snd_seq_kernel_client_dispatch+0x8b/0xb0
snd_seq_client_notify_subscription+0x72/0xa0
snd_seq_ioctl_subscribe_port+0x128/0x160
snd_seq_kernel_client_ctl+0xce/0xf0
snd_seq_oss_create_client+0x109/0x15b
alsa_seq_oss_init+0x11c/0x1aa
do_one_initcall+0x80/0x440
kernel_init_freeable+0x370/0x3c3
kernel_init+0x1b/0x190
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Link: https://lore.kernel.org/r/20221121111630.3119259-1-zhongbaisong@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/uapi/sound/asequencer.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/uapi/sound/asequencer.h b/include/uapi/sound/asequencer.h
index a75e14edc957..dbd60f48b4b0 100644
--- a/include/uapi/sound/asequencer.h
+++ b/include/uapi/sound/asequencer.h
@@ -344,10 +344,10 @@ typedef int __bitwise snd_seq_client_type_t;
#define KERNEL_CLIENT ((__force snd_seq_client_type_t) 2)
/* event filter flags */
-#define SNDRV_SEQ_FILTER_BROADCAST (1<<0) /* accept broadcast messages */
-#define SNDRV_SEQ_FILTER_MULTICAST (1<<1) /* accept multicast messages */
-#define SNDRV_SEQ_FILTER_BOUNCE (1<<2) /* accept bounce event in error */
-#define SNDRV_SEQ_FILTER_USE_EVENT (1<<31) /* use event filter */
+#define SNDRV_SEQ_FILTER_BROADCAST (1U<<0) /* accept broadcast messages */
+#define SNDRV_SEQ_FILTER_MULTICAST (1U<<1) /* accept multicast messages */
+#define SNDRV_SEQ_FILTER_BOUNCE (1U<<2) /* accept bounce event in error */
+#define SNDRV_SEQ_FILTER_USE_EVENT (1U<<31) /* use event filter */
struct snd_seq_client_info {
int client; /* client number to inquire */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 223/731] regulator: core: use kfree_const() to free space conditionally
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (221 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 222/731] ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 224/731] clk: rockchip: Fix memory leak in rockchip_clk_register_pll() Greg Kroah-Hartman
` (518 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Wang ShaoBo, Mark Brown, Sasha Levin
From: Wang ShaoBo <bobo.shaobowang@huawei.com>
[ Upstream commit dc8d006d15b623c1d80b90b45d6dcb6e890dad09 ]
Use kfree_const() to free supply_name conditionally in create_regulator()
as supply_name may be allocated from kmalloc() or directly from .rodata
section.
Fixes: 87fe29b61f95 ("regulator: push allocations in create_regulator() outside of lock")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221123034616.3609537-1-bobo.shaobowang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 7bf85e0cce47..65900895a0b2 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1750,7 +1750,7 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
regulator = kzalloc(sizeof(*regulator), GFP_KERNEL);
if (regulator == NULL) {
- kfree(supply_name);
+ kfree_const(supply_name);
return NULL;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 224/731] clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (222 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 223/731] regulator: core: use kfree_const() to free space conditionally Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 225/731] drm/amdgpu: fix pci device refcount leak Greg Kroah-Hartman
` (517 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiu Jianfeng, Heiko Stuebner, Sasha Levin
From: Xiu Jianfeng <xiujianfeng@huawei.com>
[ Upstream commit 739a6a6bbdb793bd57938cb24aa5a6df89983546 ]
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.
Fixes: 90c590254051 ("clk: rockchip: add clock type for pll clocks and pll used on rk3066")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123091201.199819-1-xiujianfeng@huawei.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/rockchip/clk-pll.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c
index f7827b3b7fc1..6e5e502be44a 100644
--- a/drivers/clk/rockchip/clk-pll.c
+++ b/drivers/clk/rockchip/clk-pll.c
@@ -981,6 +981,7 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
return mux_clk;
err_pll:
+ kfree(pll->rate_table);
clk_unregister(mux_clk);
mux_clk = pll_clk;
err_mux:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 225/731] drm/amdgpu: fix pci device refcount leak
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (223 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 224/731] clk: rockchip: Fix memory leak in rockchip_clk_register_pll() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 226/731] bonding: fix link recovery in mode 2 when updelay is nonzero Greg Kroah-Hartman
` (516 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Evan Quan, Yang Yingliang,
Alex Deucher, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit b85e285e3d6352b02947fc1b72303673dfacb0aa ]
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().
So before returning from amdgpu_device_resume|suspend_display_audio(),
pci_dev_put() is called to avoid refcount leak.
Fixes: 3f12acc8d6d4 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index 36cc89f56cea..0d998bc830c2 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -4902,6 +4902,8 @@ static void amdgpu_device_resume_display_audio(struct amdgpu_device *adev)
pm_runtime_enable(&(p->dev));
pm_runtime_resume(&(p->dev));
}
+
+ pci_dev_put(p);
}
static int amdgpu_device_suspend_display_audio(struct amdgpu_device *adev)
@@ -4940,6 +4942,7 @@ static int amdgpu_device_suspend_display_audio(struct amdgpu_device *adev)
if (expires < ktime_get_mono_fast_ns()) {
dev_warn(adev->dev, "failed to suspend display audio\n");
+ pci_dev_put(p);
/* TODO: abort the succeeding gpu reset? */
return -ETIMEDOUT;
}
@@ -4947,6 +4950,7 @@ static int amdgpu_device_suspend_display_audio(struct amdgpu_device *adev)
pm_runtime_disable(&(p->dev));
+ pci_dev_put(p);
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 226/731] bonding: fix link recovery in mode 2 when updelay is nonzero
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (224 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 225/731] drm/amdgpu: fix pci device refcount leak Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 227/731] mtd: maps: pxa2xx-flash: fix memory leak in probe Greg Kroah-Hartman
` (515 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jonathan Toppins, Jay Vosburgh,
Jakub Kicinski, Sasha Levin
From: Jonathan Toppins <jtoppins@redhat.com>
[ Upstream commit f8a65ab2f3ff7410921ebbf0dc55453102c33c56 ]
Before this change when a bond in mode 2 lost link, all of its slaves
lost link, the bonding device would never recover even after the
expiration of updelay. This change removes the updelay when the bond
currently has no usable links. Conforming to bonding.txt section 13.1
paragraph 4.
Fixes: 41f891004063 ("bonding: ignore updelay param when there is no active slave")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/bonding/bond_main.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 402dffc508ef..6dca5bfe8247 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2504,7 +2504,16 @@ static int bond_miimon_inspect(struct bonding *bond)
struct slave *slave;
bool ignore_updelay;
- ignore_updelay = !rcu_dereference(bond->curr_active_slave);
+ if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) {
+ ignore_updelay = !rcu_dereference(bond->curr_active_slave);
+ } else {
+ struct bond_up_slave *usable_slaves;
+
+ usable_slaves = rcu_dereference(bond->usable_slaves);
+
+ if (usable_slaves && usable_slaves->count == 0)
+ ignore_updelay = true;
+ }
bond_for_each_slave_rcu(bond, slave, iter) {
bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 227/731] mtd: maps: pxa2xx-flash: fix memory leak in probe
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (225 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 226/731] bonding: fix link recovery in mode 2 when updelay is nonzero Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 228/731] drbd: remove call to memset before free device/resource/connection Greg Kroah-Hartman
` (514 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zheng Yongjun, Miquel Raynal, Sasha Levin
From: Zheng Yongjun <zhengyongjun3@huawei.com>
[ Upstream commit 2399401feee27c639addc5b7e6ba519d3ca341bf ]
Free 'info' upon remapping error to avoid a memory leak.
Fixes: e644f7d62894 ("[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
[<miquel.raynal@bootlin.com>: Reword the commit log]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221119073307.22929-1-zhengyongjun3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/maps/pxa2xx-flash.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 7d96758a8f04..6e5e55755970 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -66,6 +66,7 @@ static int pxa2xx_flash_probe(struct platform_device *pdev)
if (!info->map.virt) {
printk(KERN_WARNING "Failed to ioremap %s\n",
info->map.name);
+ kfree(info);
return -ENOMEM;
}
info->map.cached = ioremap_cache(info->map.phys, info->map.size);
@@ -87,6 +88,7 @@ static int pxa2xx_flash_probe(struct platform_device *pdev)
iounmap((void *)info->map.virt);
if (info->map.cached)
iounmap(info->map.cached);
+ kfree(info);
return -EIO;
}
info->mtd->dev.parent = &pdev->dev;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 228/731] drbd: remove call to memset before free device/resource/connection
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (226 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 227/731] mtd: maps: pxa2xx-flash: fix memory leak in probe Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 229/731] drbd: destroy workqueue when drbd device was freed Greg Kroah-Hartman
` (513 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Wang ShaoBo, Jens Axboe, Sasha Levin
From: Wang ShaoBo <bobo.shaobowang@huawei.com>
[ Upstream commit 6e7b854e4c1b02dba00760dfa79d8dbf6cce561e ]
This revert c2258ffc56f2 ("drbd: poison free'd device, resource and
connection structs"), add memset is odd here for debugging, there are
some methods to accurately show what happened, such as kdump.
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-2-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 8692814b77ca ("drbd: destroy workqueue when drbd device was freed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/drbd/drbd_main.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index f4e38c208b9f..be819f80884f 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2244,7 +2244,6 @@ void drbd_destroy_device(struct kref *kref)
kref_put(&peer_device->connection->kref, drbd_destroy_connection);
kfree(peer_device);
}
- memset(device, 0xfd, sizeof(*device));
kfree(device);
kref_put(&resource->kref, drbd_destroy_resource);
}
@@ -2336,7 +2335,6 @@ void drbd_destroy_resource(struct kref *kref)
idr_destroy(&resource->devices);
free_cpumask_var(resource->cpu_mask);
kfree(resource->name);
- memset(resource, 0xf2, sizeof(*resource));
kfree(resource);
}
@@ -2677,7 +2675,6 @@ void drbd_destroy_connection(struct kref *kref)
drbd_free_socket(&connection->data);
kfree(connection->int_dig_in);
kfree(connection->int_dig_vv);
- memset(connection, 0xfc, sizeof(*connection));
kfree(connection);
kref_put(&resource->kref, drbd_destroy_resource);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 229/731] drbd: destroy workqueue when drbd device was freed
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (227 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 228/731] drbd: remove call to memset before free device/resource/connection Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 230/731] ASoC: qcom: Add checks for devm_kcalloc Greg Kroah-Hartman
` (512 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Wang ShaoBo, Jens Axboe, Sasha Levin
From: Wang ShaoBo <bobo.shaobowang@huawei.com>
[ Upstream commit 8692814b77ca4228a99da8a005de0acf40af6132 ]
A submitter workqueue is dynamically allocated by init_submitter()
called by drbd_create_device(), we should destroy it when this
device is not needed or destroyed.
Fixes: 113fef9e20e0 ("drbd: prepare to queue write requests on a submit worker")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-3-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/drbd/drbd_main.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index be819f80884f..eaf20a332401 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2244,6 +2244,8 @@ void drbd_destroy_device(struct kref *kref)
kref_put(&peer_device->connection->kref, drbd_destroy_connection);
kfree(peer_device);
}
+ if (device->submit.wq)
+ destroy_workqueue(device->submit.wq);
kfree(device);
kref_put(&resource->kref, drbd_destroy_resource);
}
@@ -2797,7 +2799,7 @@ enum drbd_ret_code drbd_create_device(struct drbd_config_context *adm_ctx, unsig
err = add_disk(disk);
if (err)
- goto out_idr_remove_from_resource;
+ goto out_destroy_workqueue;
/* inherit the connection state */
device->state.conn = first_connection(resource)->cstate;
@@ -2811,6 +2813,8 @@ enum drbd_ret_code drbd_create_device(struct drbd_config_context *adm_ctx, unsig
drbd_debugfs_device_add(device);
return NO_ERROR;
+out_destroy_workqueue:
+ destroy_workqueue(device->submit.wq);
out_idr_remove_from_resource:
for_each_connection_safe(connection, n, resource) {
peer_device = idr_remove(&connection->peer_devices, vnr);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 230/731] ASoC: qcom: Add checks for devm_kcalloc
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (228 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 229/731] drbd: destroy workqueue when drbd device was freed Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 231/731] media: vimc: Fix wrong function called when vimc_init() fails Greg Kroah-Hartman
` (511 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yuan Can, Mark Brown, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 1bf5ee979076ceb121ee51c95197d890b1cee7f4 ]
As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.
Fixes: 24caf8d9eb10 ("ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221124140510.63468-1-yuancan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/qcom/lpass-sc7180.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/qcom/lpass-sc7180.c b/sound/soc/qcom/lpass-sc7180.c
index 77a556b27cf0..24a1c121cb2e 100644
--- a/sound/soc/qcom/lpass-sc7180.c
+++ b/sound/soc/qcom/lpass-sc7180.c
@@ -131,6 +131,9 @@ static int sc7180_lpass_init(struct platform_device *pdev)
drvdata->clks = devm_kcalloc(dev, variant->num_clks,
sizeof(*drvdata->clks), GFP_KERNEL);
+ if (!drvdata->clks)
+ return -ENOMEM;
+
drvdata->num_clks = variant->num_clks;
for (i = 0; i < drvdata->num_clks; i++)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 231/731] media: vimc: Fix wrong function called when vimc_init() fails
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (229 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 230/731] ASoC: qcom: Add checks for devm_kcalloc Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 232/731] media: imon: fix a race condition in send_packet() Greg Kroah-Hartman
` (510 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen Zhongjin, Shuah Khan,
Mauro Carvalho Chehab, Sasha Levin
From: Chen Zhongjin <chenzhongjin@huawei.com>
[ Upstream commit f74d3f326d1d5b8951ce263c59a121ecfa65e7c0 ]
In vimc_init(), when platform_driver_register(&vimc_pdrv) fails,
platform_driver_unregister(&vimc_pdrv) is wrongly called rather than
platform_device_unregister(&vimc_pdev), which causes kernel warning:
Unexpected driver unregister!
WARNING: CPU: 1 PID: 14517 at drivers/base/driver.c:270 driver_unregister+0x8f/0xb0
RIP: 0010:driver_unregister+0x8f/0xb0
Call Trace:
<TASK>
vimc_init+0x7d/0x1000 [vimc]
do_one_initcall+0xd0/0x4e0
do_init_module+0x1cf/0x6b0
load_module+0x65c2/0x7820
Fixes: 4a29b7090749 ("[media] vimc: Subdevices as modules")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/test-drivers/vimc/vimc-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/test-drivers/vimc/vimc-core.c b/drivers/media/test-drivers/vimc/vimc-core.c
index 4b0ae6f51d76..857529ce3638 100644
--- a/drivers/media/test-drivers/vimc/vimc-core.c
+++ b/drivers/media/test-drivers/vimc/vimc-core.c
@@ -357,7 +357,7 @@ static int __init vimc_init(void)
if (ret) {
dev_err(&vimc_pdev.dev,
"platform driver registration failed (err=%d)\n", ret);
- platform_driver_unregister(&vimc_pdrv);
+ platform_device_unregister(&vimc_pdev);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 232/731] media: imon: fix a race condition in send_packet()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (230 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 231/731] media: vimc: Fix wrong function called when vimc_init() fails Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 233/731] clk: imx8mn: rename vpu_pll to m7_alt_pll Greg Kroah-Hartman
` (509 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+0c3cb6dc05fbbdc3ad66,
Gautam Menghani, Sean Young, Mauro Carvalho Chehab, Sasha Levin
From: Gautam Menghani <gautammenghani201@gmail.com>
[ Upstream commit 813ceef062b53d68f296aa3cb944b21a091fabdb ]
The function send_packet() has a race condition as follows:
func send_packet()
{
// do work
call usb_submit_urb()
mutex_unlock()
wait_for_event_interruptible() <-- lock gone
mutex_lock()
}
func vfd_write()
{
mutex_lock()
call send_packet() <- prev call is not completed
mutex_unlock()
}
When the mutex is unlocked and the function send_packet() waits for the
call to complete, vfd_write() can start another call, which leads to the
"URB submitted while active" warning in usb_submit_urb().
Fix this by removing the mutex_unlock() call in send_packet() and using
mutex_lock_interruptible().
Link: https://syzkaller.appspot.com/bug?id=e378e6a51fbe6c5cc43e34f131cc9a315ef0337e
Fixes: 21677cfc562a ("V4L/DVB: ir-core: add imon driver")
Reported-by: syzbot+0c3cb6dc05fbbdc3ad66@syzkaller.appspotmail.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/rc/imon.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 97355e3ebdfd..72e4bb0fb71e 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -646,15 +646,14 @@ static int send_packet(struct imon_context *ictx)
pr_err_ratelimited("error submitting urb(%d)\n", retval);
} else {
/* Wait for transmission to complete (or abort) */
- mutex_unlock(&ictx->lock);
retval = wait_for_completion_interruptible(
&ictx->tx.finished);
if (retval) {
usb_kill_urb(ictx->tx_urb);
pr_err_ratelimited("task interrupted\n");
}
- mutex_lock(&ictx->lock);
+ ictx->tx.busy = false;
retval = ictx->tx.status;
if (retval)
pr_err_ratelimited("packet tx failed (%d)\n", retval);
@@ -955,7 +954,8 @@ static ssize_t vfd_write(struct file *file, const char __user *buf,
if (ictx->disconnected)
return -ENODEV;
- mutex_lock(&ictx->lock);
+ if (mutex_lock_interruptible(&ictx->lock))
+ return -ERESTARTSYS;
if (!ictx->dev_present_intf0) {
pr_err_ratelimited("no iMON device present\n");
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 233/731] clk: imx8mn: rename vpu_pll to m7_alt_pll
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (231 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 232/731] media: imon: fix a race condition in send_packet() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 234/731] clk: imx: replace osc_hdmi with dummy Greg Kroah-Hartman
` (508 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dario Binacchi, Marco Felsch,
Abel Vesa, Sasha Levin
From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[ Upstream commit a429c60baefd95ab43a2ce7f25d5b2d7a2e431df ]
The IMX8MN platform does not have any video processing unit (VPU), and
indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there
is no occurrence of its pll. From an analysis of the code and the RM
itself, I think vpu pll is used instead of m7 alternate pll, probably
for copy and paste of code taken from modules of similar architectures.
As an example for all, if we consider the second row of the "Clock Root"
table of chapter 5 (Clocks and Power Management) of the RM:
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
ARM_M7_CLK_ROOT 0x8080 000 - 24M_REF_CLK
001 - SYSTEM_PLL2_DIV5
010 - SYSTEM_PLL2_DIV4
011 - M7_ALT_PLL_CLK
100 - SYSTEM_PLL1_CLK
101 - AUDIO_PLL1_CLK
110 - VIDEO_PLL_CLK
111 - SYSTEM_PLL3_CLK
... ... ...
but in the source code, the imx8mn_m7_sels clocks list contains vpu_pll
for the source select bits 011b.
So, let's rename "vpu_pll" to "m7_alt_pll" to be consistent with the RM.
The IMX8MN_VPU_* constants have not been removed to ensure backward
compatibility of the patch.
No functional changes intended.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/imx/clk-imx8mn.c | 16 ++++++++--------
include/dt-bindings/clock/imx8mn-clock.h | 12 ++++++++----
2 files changed, 16 insertions(+), 12 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 021355a24708..4f5f368ef25b 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -30,7 +30,7 @@ static const char * const audio_pll2_bypass_sels[] = {"audio_pll2", "audio_pll2_
static const char * const video_pll1_bypass_sels[] = {"video_pll1", "video_pll1_ref_sel", };
static const char * const dram_pll_bypass_sels[] = {"dram_pll", "dram_pll_ref_sel", };
static const char * const gpu_pll_bypass_sels[] = {"gpu_pll", "gpu_pll_ref_sel", };
-static const char * const vpu_pll_bypass_sels[] = {"vpu_pll", "vpu_pll_ref_sel", };
+static const char * const m7_alt_pll_bypass_sels[] = {"m7_alt_pll", "m7_alt_pll_ref_sel", };
static const char * const arm_pll_bypass_sels[] = {"arm_pll", "arm_pll_ref_sel", };
static const char * const sys_pll3_bypass_sels[] = {"sys_pll3", "sys_pll3_ref_sel", };
@@ -40,7 +40,7 @@ static const char * const imx8mn_a53_sels[] = {"osc_24m", "arm_pll_out", "sys_pl
static const char * const imx8mn_a53_core_sels[] = {"arm_a53_div", "arm_pll_out", };
-static const char * const imx8mn_m7_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll2_250m", "vpu_pll_out",
+static const char * const imx8mn_m7_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll2_250m", "m7_alt_pll_out",
"sys_pll1_800m", "audio_pll1_out", "video_pll1_out", "sys_pll3_out", };
static const char * const imx8mn_gpu_core_sels[] = {"osc_24m", "gpu_pll_out", "sys_pll1_800m",
@@ -228,10 +228,10 @@ static const char * const imx8mn_pwm4_sels[] = {"osc_24m", "sys_pll2_100m", "sys
"sys_pll1_80m", "video_pll1_out", };
static const char * const imx8mn_wdog_sels[] = {"osc_24m", "sys_pll1_133m", "sys_pll1_160m",
- "vpu_pll_out", "sys_pll2_125m", "sys_pll3_out",
+ "m7_alt_pll_out", "sys_pll2_125m", "sys_pll3_out",
"sys_pll1_80m", "sys_pll2_166m", };
-static const char * const imx8mn_wrclk_sels[] = {"osc_24m", "sys_pll1_40m", "vpu_pll_out",
+static const char * const imx8mn_wrclk_sels[] = {"osc_24m", "sys_pll1_40m", "m7_alt_pll_out",
"sys_pll3_out", "sys_pll2_200m", "sys_pll1_266m",
"sys_pll2_500m", "sys_pll1_100m", };
@@ -328,7 +328,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
hws[IMX8MN_VIDEO_PLL1_REF_SEL] = imx_clk_hw_mux("video_pll1_ref_sel", base + 0x28, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
hws[IMX8MN_DRAM_PLL_REF_SEL] = imx_clk_hw_mux("dram_pll_ref_sel", base + 0x50, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
hws[IMX8MN_GPU_PLL_REF_SEL] = imx_clk_hw_mux("gpu_pll_ref_sel", base + 0x64, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
- hws[IMX8MN_VPU_PLL_REF_SEL] = imx_clk_hw_mux("vpu_pll_ref_sel", base + 0x74, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+ hws[IMX8MN_M7_ALT_PLL_REF_SEL] = imx_clk_hw_mux("m7_alt_pll_ref_sel", base + 0x74, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
hws[IMX8MN_ARM_PLL_REF_SEL] = imx_clk_hw_mux("arm_pll_ref_sel", base + 0x84, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
hws[IMX8MN_SYS_PLL3_REF_SEL] = imx_clk_hw_mux("sys_pll3_ref_sel", base + 0x114, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
@@ -337,7 +337,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
hws[IMX8MN_VIDEO_PLL1] = imx_clk_hw_pll14xx("video_pll1", "video_pll1_ref_sel", base + 0x28, &imx_1443x_pll);
hws[IMX8MN_DRAM_PLL] = imx_clk_hw_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_dram_pll);
hws[IMX8MN_GPU_PLL] = imx_clk_hw_pll14xx("gpu_pll", "gpu_pll_ref_sel", base + 0x64, &imx_1416x_pll);
- hws[IMX8MN_VPU_PLL] = imx_clk_hw_pll14xx("vpu_pll", "vpu_pll_ref_sel", base + 0x74, &imx_1416x_pll);
+ hws[IMX8MN_M7_ALT_PLL] = imx_clk_hw_pll14xx("m7_alt_pll", "m7_alt_pll_ref_sel", base + 0x74, &imx_1416x_pll);
hws[IMX8MN_ARM_PLL] = imx_clk_hw_pll14xx("arm_pll", "arm_pll_ref_sel", base + 0x84, &imx_1416x_pll);
hws[IMX8MN_SYS_PLL1] = imx_clk_hw_fixed("sys_pll1", 800000000);
hws[IMX8MN_SYS_PLL2] = imx_clk_hw_fixed("sys_pll2", 1000000000);
@@ -349,7 +349,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
hws[IMX8MN_VIDEO_PLL1_BYPASS] = imx_clk_hw_mux_flags("video_pll1_bypass", base + 0x28, 16, 1, video_pll1_bypass_sels, ARRAY_SIZE(video_pll1_bypass_sels), CLK_SET_RATE_PARENT);
hws[IMX8MN_DRAM_PLL_BYPASS] = imx_clk_hw_mux_flags("dram_pll_bypass", base + 0x50, 16, 1, dram_pll_bypass_sels, ARRAY_SIZE(dram_pll_bypass_sels), CLK_SET_RATE_PARENT);
hws[IMX8MN_GPU_PLL_BYPASS] = imx_clk_hw_mux_flags("gpu_pll_bypass", base + 0x64, 28, 1, gpu_pll_bypass_sels, ARRAY_SIZE(gpu_pll_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MN_VPU_PLL_BYPASS] = imx_clk_hw_mux_flags("vpu_pll_bypass", base + 0x74, 28, 1, vpu_pll_bypass_sels, ARRAY_SIZE(vpu_pll_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MN_M7_ALT_PLL_BYPASS] = imx_clk_hw_mux_flags("m7_alt_pll_bypass", base + 0x74, 28, 1, m7_alt_pll_bypass_sels, ARRAY_SIZE(m7_alt_pll_bypass_sels), CLK_SET_RATE_PARENT);
hws[IMX8MN_ARM_PLL_BYPASS] = imx_clk_hw_mux_flags("arm_pll_bypass", base + 0x84, 28, 1, arm_pll_bypass_sels, ARRAY_SIZE(arm_pll_bypass_sels), CLK_SET_RATE_PARENT);
hws[IMX8MN_SYS_PLL3_BYPASS] = imx_clk_hw_mux_flags("sys_pll3_bypass", base + 0x114, 28, 1, sys_pll3_bypass_sels, ARRAY_SIZE(sys_pll3_bypass_sels), CLK_SET_RATE_PARENT);
@@ -359,7 +359,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
hws[IMX8MN_VIDEO_PLL1_OUT] = imx_clk_hw_gate("video_pll1_out", "video_pll1_bypass", base + 0x28, 13);
hws[IMX8MN_DRAM_PLL_OUT] = imx_clk_hw_gate("dram_pll_out", "dram_pll_bypass", base + 0x50, 13);
hws[IMX8MN_GPU_PLL_OUT] = imx_clk_hw_gate("gpu_pll_out", "gpu_pll_bypass", base + 0x64, 11);
- hws[IMX8MN_VPU_PLL_OUT] = imx_clk_hw_gate("vpu_pll_out", "vpu_pll_bypass", base + 0x74, 11);
+ hws[IMX8MN_M7_ALT_PLL_OUT] = imx_clk_hw_gate("m7_alt_pll_out", "m7_alt_pll_bypass", base + 0x74, 11);
hws[IMX8MN_ARM_PLL_OUT] = imx_clk_hw_gate("arm_pll_out", "arm_pll_bypass", base + 0x84, 11);
hws[IMX8MN_SYS_PLL3_OUT] = imx_clk_hw_gate("sys_pll3_out", "sys_pll3_bypass", base + 0x114, 11);
diff --git a/include/dt-bindings/clock/imx8mn-clock.h b/include/dt-bindings/clock/imx8mn-clock.h
index 01e8bab1d767..1aa462e5cafd 100644
--- a/include/dt-bindings/clock/imx8mn-clock.h
+++ b/include/dt-bindings/clock/imx8mn-clock.h
@@ -19,7 +19,8 @@
#define IMX8MN_VIDEO_PLL1_REF_SEL 10
#define IMX8MN_DRAM_PLL_REF_SEL 11
#define IMX8MN_GPU_PLL_REF_SEL 12
-#define IMX8MN_VPU_PLL_REF_SEL 13
+#define IMX8MN_M7_ALT_PLL_REF_SEL 13
+#define IMX8MN_VPU_PLL_REF_SEL IMX8MN_M7_ALT_PLL_REF_SEL
#define IMX8MN_ARM_PLL_REF_SEL 14
#define IMX8MN_SYS_PLL1_REF_SEL 15
#define IMX8MN_SYS_PLL2_REF_SEL 16
@@ -29,7 +30,8 @@
#define IMX8MN_VIDEO_PLL1 20
#define IMX8MN_DRAM_PLL 21
#define IMX8MN_GPU_PLL 22
-#define IMX8MN_VPU_PLL 23
+#define IMX8MN_M7_ALT_PLL 23
+#define IMX8MN_VPU_PLL IMX8MN_M7_ALT_PLL
#define IMX8MN_ARM_PLL 24
#define IMX8MN_SYS_PLL1 25
#define IMX8MN_SYS_PLL2 26
@@ -39,7 +41,8 @@
#define IMX8MN_VIDEO_PLL1_BYPASS 30
#define IMX8MN_DRAM_PLL_BYPASS 31
#define IMX8MN_GPU_PLL_BYPASS 32
-#define IMX8MN_VPU_PLL_BYPASS 33
+#define IMX8MN_M7_ALT_PLL_BYPASS 33
+#define IMX8MN_VPU_PLL_BYPASS IMX8MN_M7_ALT_PLL_BYPASS
#define IMX8MN_ARM_PLL_BYPASS 34
#define IMX8MN_SYS_PLL1_BYPASS 35
#define IMX8MN_SYS_PLL2_BYPASS 36
@@ -49,7 +52,8 @@
#define IMX8MN_VIDEO_PLL1_OUT 40
#define IMX8MN_DRAM_PLL_OUT 41
#define IMX8MN_GPU_PLL_OUT 42
-#define IMX8MN_VPU_PLL_OUT 43
+#define IMX8MN_M7_ALT_PLL_OUT 43
+#define IMX8MN_VPU_PLL_OUT IMX8MN_M7_ALT_PLL_OUT
#define IMX8MN_ARM_PLL_OUT 44
#define IMX8MN_SYS_PLL1_OUT 45
#define IMX8MN_SYS_PLL2_OUT 46
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 234/731] clk: imx: replace osc_hdmi with dummy
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (232 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 233/731] clk: imx8mn: rename vpu_pll to m7_alt_pll Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 235/731] clk: imx8mn: fix imx8mn_sai2_sels clocks list Greg Kroah-Hartman
` (507 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dario Binacchi, Marco Felsch,
Abel Vesa, Sasha Levin
From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[ Upstream commit e7fa365ff66f16772dc06b480cd78f858d10856b ]
There is no occurrence of the hdmi oscillator in the reference manual
(document IMX8MNRM Rev 2, 07/2022). Further, if we consider the indexes
76-81 and 134 of the "Clock Root" table of chapter 5 of the RM, there is
no entry for the source select bits 101b, which is the setting referenced
by "osc_hdmi".
Fix by renaming "osc_hdmi" with "dummy", a clock which has already been
used for missing source select bits.
Tested on the BSH SystemMaster (SMM) S2 board.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/imx/clk-imx8mn.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 4f5f368ef25b..dfba853335fd 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -108,27 +108,27 @@ static const char * const imx8mn_disp_pixel_sels[] = {"osc_24m", "video_pll1_out
"sys_pll3_out", "clk_ext4", };
static const char * const imx8mn_sai2_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
- "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+ "video_pll1_out", "sys_pll1_133m", "dummy",
"clk_ext3", "clk_ext4", };
static const char * const imx8mn_sai3_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
- "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+ "video_pll1_out", "sys_pll1_133m", "dummy",
"clk_ext3", "clk_ext4", };
static const char * const imx8mn_sai5_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
- "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+ "video_pll1_out", "sys_pll1_133m", "dummy",
"clk_ext2", "clk_ext3", };
static const char * const imx8mn_sai6_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
- "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+ "video_pll1_out", "sys_pll1_133m", "dummy",
"clk_ext3", "clk_ext4", };
static const char * const imx8mn_sai7_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
- "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+ "video_pll1_out", "sys_pll1_133m", "dummy",
"clk_ext3", "clk_ext4", };
static const char * const imx8mn_spdif1_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
- "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+ "video_pll1_out", "sys_pll1_133m", "dummy",
"clk_ext2", "clk_ext3", };
static const char * const imx8mn_enet_ref_sels[] = {"osc_24m", "sys_pll2_125m", "sys_pll2_50m",
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 235/731] clk: imx8mn: fix imx8mn_sai2_sels clocks list
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (233 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 234/731] clk: imx: replace osc_hdmi with dummy Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 236/731] clk: imx8mn: fix imx8mn_enet_phy_sels " Greg Kroah-Hartman
` (506 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dario Binacchi, Marco Felsch,
Abel Vesa, Sasha Levin
From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[ Upstream commit 34d996747a74e3a86990f9f9c48de09159d78edb ]
According to the "Clock Root" table of the reference manual (document
IMX8MNRM Rev 2, 07/2022):
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
SAI2_CLK_ROOT 0xA600 000 - 24M_REF_CLK
001 - AUDIO_PLL1_CLK
010 - AUDIO_PLL2_CLK
011 - VIDEO_PLL_CLK
100 - SYSTEM_PLL1_DIV6
110 - EXT_CLK_2
111 - EXT_CLK_3
... ... ...
while the imx8mn_sai2_sels list contained clk_ext3 and clk_ext4 for
source select bits 110b and 111b.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/imx/clk-imx8mn.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index dfba853335fd..4016fb124932 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -109,7 +109,7 @@ static const char * const imx8mn_disp_pixel_sels[] = {"osc_24m", "video_pll1_out
static const char * const imx8mn_sai2_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
"video_pll1_out", "sys_pll1_133m", "dummy",
- "clk_ext3", "clk_ext4", };
+ "clk_ext2", "clk_ext3", };
static const char * const imx8mn_sai3_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
"video_pll1_out", "sys_pll1_133m", "dummy",
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 236/731] clk: imx8mn: fix imx8mn_enet_phy_sels clocks list
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (234 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 235/731] clk: imx8mn: fix imx8mn_sai2_sels clocks list Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 237/731] pinctrl: pinconf-generic: add missing of_node_put() Greg Kroah-Hartman
` (505 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dario Binacchi, Marco Felsch,
Abel Vesa, Sasha Levin
From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[ Upstream commit 2626cf67f20b28446dfc3a5b9493dd535cdb747b ]
According to the "Clock Root" table of the reference manual (document
IMX8MNRM Rev 2, 07/2022):
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
ENET_PHY_REF_CLK_ROOT 0xAA80 000 - 24M_REF_CLK
001 - SYSTEM_PLL2_DIV20
010 - SYSTEM_PLL2_DIV8
011 - SYSTEM_PLL2_DIV5
100 - SYSTEM_PLL2_DIV2
101 - AUDIO_PLL1_CLK
110 - VIDEO_PLL_CLK
111 - AUDIO_PLL2_CLK
... ... ...
while the imx8mn_enet_phy_sels list didn't contained audio_pll1_out for
source select bits 101b.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/imx/clk-imx8mn.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 4016fb124932..52903146fdba 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -140,8 +140,8 @@ static const char * const imx8mn_enet_timer_sels[] = {"osc_24m", "sys_pll2_100m"
"clk_ext4", "video_pll1_out", };
static const char * const imx8mn_enet_phy_sels[] = {"osc_24m", "sys_pll2_50m", "sys_pll2_125m",
- "sys_pll2_200m", "sys_pll2_500m", "video_pll1_out",
- "audio_pll2_out", };
+ "sys_pll2_200m", "sys_pll2_500m", "audio_pll1_out",
+ "video_pll_out", "audio_pll2_out", };
static const char * const imx8mn_nand_sels[] = {"osc_24m", "sys_pll2_500m", "audio_pll1_out",
"sys_pll1_400m", "audio_pll2_out", "sys_pll3_out",
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 237/731] pinctrl: pinconf-generic: add missing of_node_put()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (235 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 236/731] clk: imx8mn: fix imx8mn_enet_phy_sels " Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 238/731] media: dvb-core: Fix ignored return value in dvb_register_frontend() Greg Kroah-Hartman
` (504 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, ZhangPeng, Linus Walleij, Sasha Levin
From: ZhangPeng <zhangpeng362@huawei.com>
[ Upstream commit 5ead93289815a075d43c415e35c8beafafb801c9 ]
of_node_put() needs to be called when jumping out of the loop, since
for_each_available_child_of_node() will increase the refcount of node.
Fixes: c7289500e29d ("pinctrl: pinconf-generic: scan also referenced phandle node")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Link: https://lore.kernel.org/r/20221125070156.3535855-1-zhangpeng362@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/pinconf-generic.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index b1db28007986..e6fe1330eab9 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -393,8 +393,10 @@ int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev,
for_each_available_child_of_node(np_config, np) {
ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map,
&reserved_maps, num_maps, type);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(np);
goto exit;
+ }
}
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 238/731] media: dvb-core: Fix ignored return value in dvb_register_frontend()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (236 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 237/731] pinctrl: pinconf-generic: add missing of_node_put() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 239/731] media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer() Greg Kroah-Hartman
` (503 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen Zhongjin,
Mauro Carvalho Chehab, Sasha Levin
From: Chen Zhongjin <chenzhongjin@huawei.com>
[ Upstream commit a574359e2e71ce16be212df3a082ed60a4bd2c5f ]
In dvb_register_frontend(), dvb_register_device() is possible to fail
but its return value is ignored.
It will cause use-after-free when module is removed, because in
dvb_unregister_frontend() it tries to unregister a not registered
device.
BUG: KASAN: use-after-free in dvb_remove_device+0x18b/0x1f0 [dvb_core]
Read of size 4 at addr ffff88800dff4824 by task rmmod/428
CPU: 3 PID: 428 Comm: rmmod
Call Trace:
<TASK>
...
dvb_remove_device+0x18b/0x1f0 [dvb_core]
dvb_unregister_frontend+0x7b/0x130 [dvb_core]
vidtv_bridge_remove+0x6e/0x160 [dvb_vidtv_bridge]
...
Fix this by catching return value of dvb_register_device().
However the fe->refcount can't be put to zero immediately, because
there are still modules calling dvb_frontend_detach() when
dvb_register_frontend() fails.
Link: https://lore.kernel.org/linux-media/20221108033005.169095-1-chenzhongjin@huawei.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/dvb-core/dvb_frontend.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c
index 258637d762d6..70d07cdcb2a6 100644
--- a/drivers/media/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb-core/dvb_frontend.c
@@ -2985,6 +2985,7 @@ int dvb_register_frontend(struct dvb_adapter *dvb,
.name = fe->ops.info.name,
#endif
};
+ int ret;
dev_dbg(dvb->device, "%s:\n", __func__);
@@ -3018,8 +3019,13 @@ int dvb_register_frontend(struct dvb_adapter *dvb,
"DVB: registering adapter %i frontend %i (%s)...\n",
fe->dvb->num, fe->id, fe->ops.info.name);
- dvb_register_device(fe->dvb, &fepriv->dvbdev, &dvbdev_template,
+ ret = dvb_register_device(fe->dvb, &fepriv->dvbdev, &dvbdev_template,
fe, DVB_DEVICE_FRONTEND, 0);
+ if (ret) {
+ dvb_frontend_put(fe);
+ mutex_unlock(&frontend_mutex);
+ return ret;
+ }
/*
* Initialize the cache to the proper values according with the
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 239/731] media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (237 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 238/731] media: dvb-core: Fix ignored return value in dvb_register_frontend() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 240/731] media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC Greg Kroah-Hartman
` (502 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wei Chen, Baisong Zhong,
Mauro Carvalho Chehab, Sasha Levin
From: Baisong Zhong <zhongbaisong@huawei.com>
[ Upstream commit 0ed554fd769a19ea8464bb83e9ac201002ef74ad ]
Wei Chen reports a kernel bug as blew:
general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
...
Call Trace:
<TASK>
__i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109
i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170
i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297
i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd834a8bded
In az6027_i2c_xfer(), if msg[i].addr is 0x99,
a null-ptr-deref will caused when accessing msg[i].buf.
For msg[i].len is 0 and msg[i].buf is null.
Fix this by checking msg[i].len in az6027_i2c_xfer().
Link: https://lore.kernel.org/lkml/CAO4mrfcPHB5aQJO=mpqV+p8mPLNg-Fok0gw8gZ=zemAfMGTzMg@mail.gmail.com/
Link: https://lore.kernel.org/linux-media/20221120065918.2160782-1-zhongbaisong@huawei.com
Fixes: 76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/dvb-usb/az6027.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/media/usb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c
index 86788771175b..32b4ee65c280 100644
--- a/drivers/media/usb/dvb-usb/az6027.c
+++ b/drivers/media/usb/dvb-usb/az6027.c
@@ -975,6 +975,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
if (msg[i].addr == 0x99) {
req = 0xBE;
index = 0;
+ if (msg[i].len < 1) {
+ i = -EOPNOTSUPP;
+ break;
+ }
value = msg[i].buf[0] & 0x00ff;
length = 1;
az6027_usb_out_op(d, req, value, index, data, length);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 240/731] media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (238 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 239/731] media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 241/731] drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe() Greg Kroah-Hartman
` (501 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alim Akhtar, Aakarsh Jain,
Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin
From: Aakarsh Jain <aakarsh.jain@samsung.com>
[ Upstream commit f50ebe10f5d8092c37e2bd430c78e03bf38b1e20 ]
Commit 5441e9dafdfc6dc40 ("[media] s5p-mfc: Core support for MFC v7")
which adds mfc v7 support for Exynos3250 and use the same compatible
string as used by Exynos5240 but both the IPs are a bit different in
terms of IP clock.
Add variant driver data based on the new compatible string
"samsung,exynos3250-mfc" for Exynos3250 SoC.
Suggested-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: 5441e9dafdfc ("[media] s5p-mfc: Core support for MFC v7")
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/s5p-mfc/s5p_mfc.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 4fc135d9f38b..4c511b026bd7 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1583,8 +1583,18 @@ static struct s5p_mfc_variant mfc_drvdata_v7 = {
.port_num = MFC_NUM_PORTS_V7,
.buf_size = &buf_size_v7,
.fw_name[0] = "s5p-mfc-v7.fw",
- .clk_names = {"mfc", "sclk_mfc"},
- .num_clocks = 2,
+ .clk_names = {"mfc"},
+ .num_clocks = 1,
+};
+
+static struct s5p_mfc_variant mfc_drvdata_v7_3250 = {
+ .version = MFC_VERSION_V7,
+ .version_bit = MFC_V7_BIT,
+ .port_num = MFC_NUM_PORTS_V7,
+ .buf_size = &buf_size_v7,
+ .fw_name[0] = "s5p-mfc-v7.fw",
+ .clk_names = {"mfc", "sclk_mfc"},
+ .num_clocks = 2,
};
static struct s5p_mfc_buf_size_v6 mfc_buf_size_v8 = {
@@ -1654,6 +1664,9 @@ static const struct of_device_id exynos_mfc_match[] = {
}, {
.compatible = "samsung,mfc-v7",
.data = &mfc_drvdata_v7,
+ }, {
+ .compatible = "samsung,exynos3250-mfc",
+ .data = &mfc_drvdata_v7_3250,
}, {
.compatible = "samsung,mfc-v8",
.data = &mfc_drvdata_v8,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 241/731] drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (239 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 240/731] media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 242/731] ASoC: dt-bindings: wcd9335: fix reset line polarity in example Greg Kroah-Hartman
` (500 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Zekun, Thierry Reding, Sasha Levin
From: Zhang Zekun <zhangzekun11@huawei.com>
[ Upstream commit 7ad4384d53c67672a8720cdc2ef638d7d1710ab8 ]
Add the missing clk_disable_unprepare() before return from
tegra_dc_probe() in the error handling path.
Fixes: f68ba6912bd2 ("drm/tegra: dc: Link DC1 to DC0 on Tegra20")
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/tegra/dc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index a29d64f87563..abb409b08bc6 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -3022,8 +3022,10 @@ static int tegra_dc_probe(struct platform_device *pdev)
usleep_range(2000, 4000);
err = reset_control_assert(dc->rst);
- if (err < 0)
+ if (err < 0) {
+ clk_disable_unprepare(dc->clk);
return err;
+ }
usleep_range(2000, 4000);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 242/731] ASoC: dt-bindings: wcd9335: fix reset line polarity in example
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (240 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 241/731] drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 243/731] ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_snd Greg Kroah-Hartman
` (499 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Torokhov,
Krzysztof Kozlowski, Mark Brown, Sasha Levin
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ Upstream commit 34cb111f8a7b98b5fec809dd194003bca20ef1b2 ]
When resetting the block, the reset line is being driven low and then
high, which means that the line in DTS should be annotated as "active
low".
Fixes: 1877c9fda1b7 ("ASoC: dt-bindings: add dt bindings for wcd9335 audio codec")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-2-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/devicetree/bindings/sound/qcom,wcd9335.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
index 5d6ea66a863f..1f75feec3dec 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
@@ -109,7 +109,7 @@ audio-codec@1{
reg = <1 0>;
interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "intr2"
- reset-gpios = <&msmgpio 64 0>;
+ reset-gpios = <&msmgpio 64 GPIO_ACTIVE_LOW>;
slim-ifc-dev = <&wc9335_ifd>;
clock-names = "mclk", "native";
clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 243/731] ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_snd
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (241 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 242/731] ASoC: dt-bindings: wcd9335: fix reset line polarity in example Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 244/731] NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding Greg Kroah-Hartman
` (498 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Mark Brown, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit d067b3378a78c9c3048ac535e31c171b6f5b5846 ]
As the mtk_btcvsd_snd_write and mtk_btcvsd_snd_read may return error,
it should be better to catch the exception.
Fixes: 4bd8597dc36c ("ASoC: mediatek: add btcvsd driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221116030750.40500-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/mediatek/common/mtk-btcvsd.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/sound/soc/mediatek/common/mtk-btcvsd.c b/sound/soc/mediatek/common/mtk-btcvsd.c
index d884bb7c0fc7..1c28b41e4311 100644
--- a/sound/soc/mediatek/common/mtk-btcvsd.c
+++ b/sound/soc/mediatek/common/mtk-btcvsd.c
@@ -1038,11 +1038,9 @@ static int mtk_pcm_btcvsd_copy(struct snd_soc_component *component,
struct mtk_btcvsd_snd *bt = snd_soc_component_get_drvdata(component);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- mtk_btcvsd_snd_write(bt, buf, count);
+ return mtk_btcvsd_snd_write(bt, buf, count);
else
- mtk_btcvsd_snd_read(bt, buf, count);
-
- return 0;
+ return mtk_btcvsd_snd_read(bt, buf, count);
}
/* kcontrol */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 244/731] NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (242 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 243/731] ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_snd Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 245/731] NFSv4.2: Fix a memory stomp in decode_attr_security_label Greg Kroah-Hartman
` (497 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Trond Myklebust, Sasha Levin
From: Trond Myklebust <trond.myklebust@hammerspace.com>
[ Upstream commit eef7314caf2d73a94b68ba293cd105154d3a664e ]
We need to clear the FATTR4_WORD2_SECURITY_LABEL bitmap flag
irrespective of whether or not the label is too long.
Fixes: aa9c2669626c ("NFS: Client implementation of Labeled-NFS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/nfs4xdr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 046788afb6d9..9d19b801cb39 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -4179,6 +4179,7 @@ static int decode_attr_security_label(struct xdr_stream *xdr, uint32_t *bitmap,
p = xdr_inline_decode(xdr, len);
if (unlikely(!p))
return -EIO;
+ bitmap[2] &= ~FATTR4_WORD2_SECURITY_LABEL;
if (len < NFS4_MAXLABELLEN) {
if (label) {
if (label->len) {
@@ -4191,7 +4192,6 @@ static int decode_attr_security_label(struct xdr_stream *xdr, uint32_t *bitmap,
label->lfs = lfs;
status = NFS_ATTR_FATTR_V4_SECURITY_LABEL;
}
- bitmap[2] &= ~FATTR4_WORD2_SECURITY_LABEL;
} else
printk(KERN_WARNING "%s: label too long (%u)!\n",
__func__, len);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 245/731] NFSv4.2: Fix a memory stomp in decode_attr_security_label
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (243 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 244/731] NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 246/731] NFSv4.2: Fix initialisation of struct nfs4_label Greg Kroah-Hartman
` (496 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Trond Myklebust, Sasha Levin
From: Trond Myklebust <trond.myklebust@hammerspace.com>
[ Upstream commit 43c1031f7110967c240cb6e922adcfc4b8899183 ]
We must not change the value of label->len if it is zero, since that
indicates we stored a label.
Fixes: b4487b935452 ("nfs: Fix getxattr kernel panic and memory overflow")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/nfs4xdr.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 9d19b801cb39..0ae9e06a0bba 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -4181,12 +4181,10 @@ static int decode_attr_security_label(struct xdr_stream *xdr, uint32_t *bitmap,
return -EIO;
bitmap[2] &= ~FATTR4_WORD2_SECURITY_LABEL;
if (len < NFS4_MAXLABELLEN) {
- if (label) {
- if (label->len) {
- if (label->len < len)
- return -ERANGE;
- memcpy(label->label, p, len);
- }
+ if (label && label->len) {
+ if (label->len < len)
+ return -ERANGE;
+ memcpy(label->label, p, len);
label->len = len;
label->pi = pi;
label->lfs = lfs;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 246/731] NFSv4.2: Fix initialisation of struct nfs4_label
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (244 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 245/731] NFSv4.2: Fix a memory stomp in decode_attr_security_label Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 247/731] NFSv4: Fix a credential leak in _nfs4_discover_trunking() Greg Kroah-Hartman
` (495 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Trond Myklebust, Sasha Levin
From: Trond Myklebust <trond.myklebust@hammerspace.com>
[ Upstream commit c528f70f504434eaff993a5ddd52203a2010d51f ]
The call to nfs4_label_init_security() should return a fully initialised
label.
Fixes: aa9c2669626c ("NFS: Client implementation of Labeled-NFS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/nfs4proc.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index dc03924b6b71..dcc0677d1546 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -126,6 +126,11 @@ nfs4_label_init_security(struct inode *dir, struct dentry *dentry,
if (nfs_server_capable(dir, NFS_CAP_SECURITY_LABEL) == 0)
return NULL;
+ label->lfs = 0;
+ label->pi = 0;
+ label->len = 0;
+ label->label = NULL;
+
err = security_dentry_init_security(dentry, sattr->ia_mode,
&dentry->d_name, (void **)&label->label, &label->len);
if (err == 0)
@@ -3823,7 +3828,7 @@ nfs4_atomic_open(struct inode *dir, struct nfs_open_context *ctx,
int open_flags, struct iattr *attr, int *opened)
{
struct nfs4_state *state;
- struct nfs4_label l = {0, 0, 0, NULL}, *label = NULL;
+ struct nfs4_label l, *label;
label = nfs4_label_init_security(dir, ctx->dentry, attr, &l);
@@ -4657,7 +4662,7 @@ nfs4_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
int flags)
{
struct nfs_server *server = NFS_SERVER(dir);
- struct nfs4_label l, *ilabel = NULL;
+ struct nfs4_label l, *ilabel;
struct nfs_open_context *ctx;
struct nfs4_state *state;
int status = 0;
@@ -5017,7 +5022,7 @@ static int nfs4_proc_symlink(struct inode *dir, struct dentry *dentry,
struct nfs4_exception exception = {
.interruptible = true,
};
- struct nfs4_label l, *label = NULL;
+ struct nfs4_label l, *label;
int err;
label = nfs4_label_init_security(dir, dentry, sattr, &l);
@@ -5058,7 +5063,7 @@ static int nfs4_proc_mkdir(struct inode *dir, struct dentry *dentry,
struct nfs4_exception exception = {
.interruptible = true,
};
- struct nfs4_label l, *label = NULL;
+ struct nfs4_label l, *label;
int err;
label = nfs4_label_init_security(dir, dentry, sattr, &l);
@@ -5177,7 +5182,7 @@ static int nfs4_proc_mknod(struct inode *dir, struct dentry *dentry,
struct nfs4_exception exception = {
.interruptible = true,
};
- struct nfs4_label l, *label = NULL;
+ struct nfs4_label l, *label;
int err;
label = nfs4_label_init_security(dir, dentry, sattr, &l);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 247/731] NFSv4: Fix a credential leak in _nfs4_discover_trunking()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (245 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 246/731] NFSv4.2: Fix initialisation of struct nfs4_label Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 248/731] NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn Greg Kroah-Hartman
` (494 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Trond Myklebust, Sasha Levin
From: Trond Myklebust <trond.myklebust@hammerspace.com>
[ Upstream commit e83458fce080dc23c25353a1af90bfecf79c7369 ]
Fixes: 4f40a5b55446 ("NFSv4: Add an fattr allocation to _nfs4_discover_trunking()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/nfs4proc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index dcc0677d1546..3c9ed63710a9 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3987,7 +3987,7 @@ static int _nfs4_discover_trunking(struct nfs_server *server,
page = alloc_page(GFP_KERNEL);
if (!page)
- return -ENOMEM;
+ goto out_put_cred;
locations = kmalloc(sizeof(struct nfs4_fs_locations), GFP_KERNEL);
if (!locations)
goto out_free;
@@ -4003,6 +4003,8 @@ static int _nfs4_discover_trunking(struct nfs_server *server,
kfree(locations);
out_free:
__free_page(page);
+out_put_cred:
+ put_cred(cred);
return status;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 248/731] NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (246 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 247/731] NFSv4: Fix a credential leak in _nfs4_discover_trunking() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 249/731] NFS: Fix an Oops in nfs_d_automount() Greg Kroah-Hartman
` (493 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Trond Myklebust, Sasha Levin
From: Trond Myklebust <trond.myklebust@hammerspace.com>
[ Upstream commit 51069e4aef6257b0454057359faed0ab0c9af083 ]
If we're asked to recover open state while a delegation return is
outstanding, then the state manager thread cannot use a cached open, so
if the server returns a delegation, we can end up deadlocked behind the
pending delegreturn.
To avoid this problem, let's just ask the server not to give us a
delegation unless we're explicitly reclaiming one.
Fixes: be36e185bd26 ("NFSv4: nfs4_open_recover_helper() must set share access")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/nfs4proc.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 3c9ed63710a9..b6b1fad031c7 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2144,18 +2144,18 @@ static struct nfs4_opendata *nfs4_open_recoverdata_alloc(struct nfs_open_context
}
static int nfs4_open_recover_helper(struct nfs4_opendata *opendata,
- fmode_t fmode)
+ fmode_t fmode)
{
struct nfs4_state *newstate;
+ struct nfs_server *server = NFS_SB(opendata->dentry->d_sb);
+ int openflags = opendata->o_arg.open_flags;
int ret;
if (!nfs4_mode_match_open_stateid(opendata->state, fmode))
return 0;
- opendata->o_arg.open_flags = 0;
opendata->o_arg.fmode = fmode;
- opendata->o_arg.share_access = nfs4_map_atomic_open_share(
- NFS_SB(opendata->dentry->d_sb),
- fmode, 0);
+ opendata->o_arg.share_access =
+ nfs4_map_atomic_open_share(server, fmode, openflags);
memset(&opendata->o_res, 0, sizeof(opendata->o_res));
memset(&opendata->c_res, 0, sizeof(opendata->c_res));
nfs4_init_opendata_res(opendata);
@@ -2735,10 +2735,15 @@ static int _nfs4_open_expired(struct nfs_open_context *ctx, struct nfs4_state *s
struct nfs4_opendata *opendata;
int ret;
- opendata = nfs4_open_recoverdata_alloc(ctx, state,
- NFS4_OPEN_CLAIM_FH);
+ opendata = nfs4_open_recoverdata_alloc(ctx, state, NFS4_OPEN_CLAIM_FH);
if (IS_ERR(opendata))
return PTR_ERR(opendata);
+ /*
+ * We're not recovering a delegation, so ask for no delegation.
+ * Otherwise the recovery thread could deadlock with an outstanding
+ * delegation return.
+ */
+ opendata->o_arg.open_flags = O_DIRECT;
ret = nfs4_open_recover(opendata, state);
if (ret == -ESTALE)
d_drop(ctx->dentry);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 249/731] NFS: Fix an Oops in nfs_d_automount()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (247 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 248/731] NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 250/731] ALSA: asihpi: fix missing pci_disable_device() Greg Kroah-Hartman
` (492 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Trond Myklebust, Sasha Levin
From: Trond Myklebust <trond.myklebust@hammerspace.com>
[ Upstream commit 35e3b6ae84935d0d7ff76cbdaa83411b0ad5e471 ]
When mounting from a NFSv4 referral, path->dentry can end up being a
negative dentry, so derive the struct nfs_server from the dentry
itself instead.
Fixes: 2b0143b5c986 ("VFS: normal filesystems (and lustre): d_inode() annotations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/namespace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index bc0c698f3350..565421c6682e 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -147,7 +147,7 @@ struct vfsmount *nfs_d_automount(struct path *path)
struct nfs_fs_context *ctx;
struct fs_context *fc;
struct vfsmount *mnt = ERR_PTR(-ENOMEM);
- struct nfs_server *server = NFS_SERVER(d_inode(path->dentry));
+ struct nfs_server *server = NFS_SB(path->dentry->d_sb);
struct nfs_client *client = server->nfs_client;
int timeout = READ_ONCE(nfs_mountpoint_expiry_timeout);
int ret;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 250/731] ALSA: asihpi: fix missing pci_disable_device()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (248 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 249/731] NFS: Fix an Oops in nfs_d_automount() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 251/731] wifi: iwlwifi: mvm: fix double free on tx path Greg Kroah-Hartman
` (491 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Liu Shixin, Takashi Iwai, Sasha Levin
From: Liu Shixin <liushixin2@huawei.com>
[ Upstream commit 9d86515c3d4c0564a0c31a2df87d735353a1971e ]
pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release().
Fixes: 3285ea10e9b0 ("ALSA: asihpi - Interrelated HPI tidy up.")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221126021429.3029562-1-liushixin2@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/pci/asihpi/hpioctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/pci/asihpi/hpioctl.c b/sound/pci/asihpi/hpioctl.c
index bb31b7fe867d..477a5b4b50bc 100644
--- a/sound/pci/asihpi/hpioctl.c
+++ b/sound/pci/asihpi/hpioctl.c
@@ -361,7 +361,7 @@ int asihpi_adapter_probe(struct pci_dev *pci_dev,
pci_dev->device, pci_dev->subsystem_vendor,
pci_dev->subsystem_device, pci_dev->devfn);
- if (pci_enable_device(pci_dev) < 0) {
+ if (pcim_enable_device(pci_dev) < 0) {
dev_err(&pci_dev->dev,
"pci_enable_device failed, disabling device\n");
return -EIO;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 251/731] wifi: iwlwifi: mvm: fix double free on tx path.
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (249 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 250/731] ALSA: asihpi: fix missing pci_disable_device() Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 252/731] ASoC: mediatek: mt8173: Fix debugfs registration for components Greg Kroah-Hartman
` (490 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Amol Jawale, Ben Greear,
Gregory Greenman, Sasha Levin
From: Ben Greear <greearb@candelatech.com>
[ Upstream commit 0473cbae2137b963bd0eaa74336131cb1d3bc6c3 ]
We see kernel crashes and lockups and KASAN errors related to ax210
firmware crashes. One of the KASAN dumps pointed at the tx path,
and it appears there is indeed a way to double-free an skb.
If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the
method will be freed. But, in case where we build TSO skb buffer,
the skb may also be freed in error case. So, return 0 in that particular
error case and do cleanup manually.
BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90
iwlwifi 0000:06:00.0: 0x00000000 | tsf hi
Read of size 8 at addr ffff88813cfa4ba0 by task btserver/9650
CPU: 4 PID: 9650 Comm: btserver Tainted: G W 5.19.8+ #5
iwlwifi 0000:06:00.0: 0x00000000 | time gp1
Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x6d
print_report.cold.12+0xf2/0x684
iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2
? __list_del_entry_valid+0x12/0x90
kasan_report+0x8b/0x180
iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type
? __list_del_entry_valid+0x12/0x90
__list_del_entry_valid+0x12/0x90
iwlwifi 0000:06:00.0: 0x00000048 | uCode version major
tcp_update_skb_after_send+0x5d/0x170
__tcp_transmit_skb+0xb61/0x15c0
iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor
? __tcp_select_window+0x490/0x490
iwlwifi 0000:06:00.0: 0x00000420 | hw version
? trace_kmalloc_node+0x29/0xd0
? __kmalloc_node_track_caller+0x12a/0x260
? memset+0x1f/0x40
? __build_skb_around+0x125/0x150
? __alloc_skb+0x1d4/0x220
? skb_zerocopy_clone+0x55/0x230
iwlwifi 0000:06:00.0: 0x00489002 | board version
? kmalloc_reserve+0x80/0x80
? rcu_read_lock_bh_held+0x60/0xb0
tcp_write_xmit+0x3f1/0x24d0
iwlwifi 0000:06:00.0: 0x034E001C | hcmd
? __check_object_size+0x180/0x350
iwlwifi 0000:06:00.0: 0x24020000 | isr0
tcp_sendmsg_locked+0x8a9/0x1520
iwlwifi 0000:06:00.0: 0x01400000 | isr1
? tcp_sendpage+0x50/0x50
iwlwifi 0000:06:00.0: 0x48F0000A | isr2
? lock_release+0xb9/0x400
? tcp_sendmsg+0x14/0x40
iwlwifi 0000:06:00.0: 0x00C3080C | isr3
? lock_downgrade+0x390/0x390
? do_raw_spin_lock+0x114/0x1d0
iwlwifi 0000:06:00.0: 0x00200000 | isr4
? rwlock_bug.part.2+0x50/0x50
iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id
? rwlock_bug.part.2+0x50/0x50
? lockdep_hardirqs_on_prepare+0xe/0x200
iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event
? __local_bh_enable_ip+0x87/0xe0
? inet_send_prepare+0x220/0x220
iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration
__sys_sendto+0x19d/0x250
iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid
? __ia32_sys_getpeername+0x40/0x40
iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_sched_held+0x5a/0xd0
? lock_release+0xb9/0x400
? lock_downgrade+0x390/0x390
? ktime_get+0x64/0x130
? ktime_get+0x8d/0x130
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? rcu_read_lock_bh_held+0xb0/0xb0
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f1d126e4531
Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89
RSP: 002b:00007ffe21a679d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000000000000ffdc RCX: 00007f1d126e4531
RDX: 0000000000010000 RSI: 000000000374acf0 RDI: 0000000000000014
RBP: 00007ffe21a67ac0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000010
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
</TASK>
Allocated by task 9650:
kasan_save_stack+0x1c/0x40
__kasan_slab_alloc+0x6d/0x90
kmem_cache_alloc_node+0xf3/0x2b0
__alloc_skb+0x191/0x220
tcp_stream_alloc_skb+0x3f/0x330
tcp_sendmsg_locked+0x67c/0x1520
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
__sys_sendto+0x19d/0x250
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 9650:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x102/0x170
kmem_cache_free+0xc8/0x3e0
iwl_mvm_mac_itxq_xmit+0x124/0x270 [iwlmvm]
ieee80211_queue_skb+0x874/0xd10 [mac80211]
ieee80211_xmit_fast+0xf80/0x1180 [mac80211]
__ieee80211_subif_start_xmit+0x287/0x680 [mac80211]
ieee80211_subif_start_xmit+0xcd/0x730 [mac80211]
dev_hard_start_xmit+0xf6/0x420
__dev_queue_xmit+0x165b/0x1b50
ip_finish_output2+0x66e/0xfb0
__ip_finish_output+0x487/0x6d0
ip_output+0x11c/0x350
__ip_queue_xmit+0x36b/0x9d0
__tcp_transmit_skb+0xb35/0x15c0
tcp_write_xmit+0x3f1/0x24d0
tcp_sendmsg_locked+0x8a9/0x1520
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
__sys_sendto+0x19d/0x250
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The buggy address belongs to the object at ffff88813cfa4b40
which belongs to the cache skbuff_fclone_cache of size 472
The buggy address is located 96 bytes inside of
472-byte region [ffff88813cfa4b40, ffff88813cfa4d18)
The buggy address belongs to the physical page:
page:ffffea0004f3e900 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813cfa6c40 pfn:0x13cfa4
head:ffffea0004f3e900 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x5fff8000010200(slab|head|node=0|zone=2|lastcpupid=0x3fff)
raw: 005fff8000010200 ffffea0004656b08 ffffea0008e8cf08 ffff8881081a5240
raw: ffff88813cfa6c40 0000000000170015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88813cfa4a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88813cfa4b00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff88813cfa4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88813cfa4c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88813cfa4c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 08f7d8b69aaf ("iwlwifi: mvm: bring back mvm GSO code")
Link: https://lore.kernel.org/linux-wireless/20220928193057.16132-1-greearb@candelatech.com/
Tested-by: Amol Jawale <amol.jawale@candelatech.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20221123225313.21b1ee31d666.I3b3ba184433dd2a544d91eeeda29b467021824ae@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index b5368cb57ca8..e354918c2480 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -1150,6 +1150,7 @@ int iwl_mvm_tx_skb_sta(struct iwl_mvm *mvm, struct sk_buff *skb,
struct sk_buff_head mpdus_skbs;
unsigned int payload_len;
int ret;
+ struct sk_buff *orig_skb = skb;
if (WARN_ON_ONCE(!mvmsta))
return -1;
@@ -1182,8 +1183,17 @@ int iwl_mvm_tx_skb_sta(struct iwl_mvm *mvm, struct sk_buff *skb,
ret = iwl_mvm_tx_mpdu(mvm, skb, &info, sta);
if (ret) {
+ /* Free skbs created as part of TSO logic that have not yet been dequeued */
__skb_queue_purge(&mpdus_skbs);
- return ret;
+ /* skb here is not necessarily same as skb that entered this method,
+ * so free it explicitly.
+ */
+ if (skb == orig_skb)
+ ieee80211_free_txskb(mvm->hw, skb);
+ else
+ kfree_skb(skb);
+ /* there was error, but we consumed skb one way or another, so return 0 */
+ return 0;
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 252/731] ASoC: mediatek: mt8173: Fix debugfs registration for components
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (250 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 251/731] wifi: iwlwifi: mvm: fix double free on tx path Greg Kroah-Hartman
@ 2022-12-28 14:35 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 253/731] ASoC: mediatek: mt8173: Enable IRQ when pdata is ready Greg Kroah-Hartman
` (489 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:35 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Mark Brown, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit 8c32984bc7da29828260ac514d5d4967f7e8f62d ]
When registering the mt8173-afe-pcm driver, we are also adding two
components: one is for the PCM DAIs and one is for the HDMI DAIs, but
when debugfs is enabled, we're getting the following issue:
[ 17.279176] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!
[ 17.288345] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!
To overcome to that without any potentially big rewrite of this driver,
similarly to what was done in mt8195-afe-pcm, add a debugfs_prefix to
the components before actually adding them.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211111161108.502344-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 4cbb264d4e91 ("ASoC: mediatek: mt8173: Enable IRQ when pdata is ready")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 51 ++++++++++++++++++----
1 file changed, 43 insertions(+), 8 deletions(-)
diff --git a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
index 6350390414d4..31494930433f 100644
--- a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
+++ b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
@@ -1054,6 +1054,7 @@ static int mt8173_afe_pcm_dev_probe(struct platform_device *pdev)
int irq_id;
struct mtk_base_afe *afe;
struct mt8173_afe_private *afe_priv;
+ struct snd_soc_component *comp_pcm, *comp_hdmi;
ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(33));
if (ret)
@@ -1142,23 +1143,55 @@ static int mt8173_afe_pcm_dev_probe(struct platform_device *pdev)
if (ret)
goto err_pm_disable;
- ret = devm_snd_soc_register_component(&pdev->dev,
- &mt8173_afe_pcm_dai_component,
- mt8173_afe_pcm_dais,
- ARRAY_SIZE(mt8173_afe_pcm_dais));
+ comp_pcm = devm_kzalloc(&pdev->dev, sizeof(*comp_pcm), GFP_KERNEL);
+ if (!comp_pcm) {
+ ret = -ENOMEM;
+ goto err_pm_disable;
+ }
+
+ ret = snd_soc_component_initialize(comp_pcm,
+ &mt8173_afe_pcm_dai_component,
+ &pdev->dev);
if (ret)
goto err_pm_disable;
- ret = devm_snd_soc_register_component(&pdev->dev,
- &mt8173_afe_hdmi_dai_component,
- mt8173_afe_hdmi_dais,
- ARRAY_SIZE(mt8173_afe_hdmi_dais));
+#ifdef CONFIG_DEBUG_FS
+ comp_pcm->debugfs_prefix = "pcm";
+#endif
+
+ ret = snd_soc_add_component(comp_pcm,
+ mt8173_afe_pcm_dais,
+ ARRAY_SIZE(mt8173_afe_pcm_dais));
+ if (ret)
+ goto err_pm_disable;
+
+ comp_hdmi = devm_kzalloc(&pdev->dev, sizeof(*comp_hdmi), GFP_KERNEL);
+ if (!comp_hdmi) {
+ ret = -ENOMEM;
+ goto err_pm_disable;
+ }
+
+ ret = snd_soc_component_initialize(comp_hdmi,
+ &mt8173_afe_hdmi_dai_component,
+ &pdev->dev);
if (ret)
goto err_pm_disable;
+#ifdef CONFIG_DEBUG_FS
+ comp_hdmi->debugfs_prefix = "hdmi";
+#endif
+
+ ret = snd_soc_add_component(comp_hdmi,
+ mt8173_afe_hdmi_dais,
+ ARRAY_SIZE(mt8173_afe_hdmi_dais));
+ if (ret)
+ goto err_cleanup_components;
+
dev_info(&pdev->dev, "MT8173 AFE driver initialized.\n");
return 0;
+err_cleanup_components:
+ snd_soc_unregister_component(&pdev->dev);
err_pm_disable:
pm_runtime_disable(&pdev->dev);
return ret;
@@ -1166,6 +1199,8 @@ static int mt8173_afe_pcm_dev_probe(struct platform_device *pdev)
static int mt8173_afe_pcm_dev_remove(struct platform_device *pdev)
{
+ snd_soc_unregister_component(&pdev->dev);
+
pm_runtime_disable(&pdev->dev);
if (!pm_runtime_status_suspended(&pdev->dev))
mt8173_afe_runtime_suspend(&pdev->dev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 253/731] ASoC: mediatek: mt8173: Enable IRQ when pdata is ready
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (251 preceding siblings ...)
2022-12-28 14:35 ` [PATCH 5.15 252/731] ASoC: mediatek: mt8173: Fix debugfs registration for components Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 254/731] drm/amd/pm/smu11: BACO is supported when its in BACO state Greg Kroah-Hartman
` (488 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ricardo Ribalda, Mark Brown, Sasha Levin
From: Ricardo Ribalda <ribalda@chromium.org>
[ Upstream commit 4cbb264d4e9136acab2c8fd39e39ab1b1402b84b ]
If the device does not come straight from reset, we might receive an IRQ
before we are ready to handle it.
Fixes:
[ 2.334737] Unable to handle kernel read from unreadable memory at virtual address 00000000000001e4
[ 2.522601] Call trace:
[ 2.525040] regmap_read+0x1c/0x80
[ 2.528434] mt8173_afe_irq_handler+0x40/0xf0
...
[ 2.598921] start_kernel+0x338/0x42c
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Fixes: ee0bcaff109f ("ASoC: mediatek: Add AFE platform driver")
Link: https://lore.kernel.org/r/20221128-mt8173-afe-v1-0-70728221628f@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
index 31494930433f..8092506facbd 100644
--- a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
+++ b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
@@ -1072,16 +1072,6 @@ static int mt8173_afe_pcm_dev_probe(struct platform_device *pdev)
afe->dev = &pdev->dev;
- irq_id = platform_get_irq(pdev, 0);
- if (irq_id <= 0)
- return irq_id < 0 ? irq_id : -ENXIO;
- ret = devm_request_irq(afe->dev, irq_id, mt8173_afe_irq_handler,
- 0, "Afe_ISR_Handle", (void *)afe);
- if (ret) {
- dev_err(afe->dev, "could not request_irq\n");
- return ret;
- }
-
afe->base_addr = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(afe->base_addr))
return PTR_ERR(afe->base_addr);
@@ -1187,6 +1177,16 @@ static int mt8173_afe_pcm_dev_probe(struct platform_device *pdev)
if (ret)
goto err_cleanup_components;
+ irq_id = platform_get_irq(pdev, 0);
+ if (irq_id <= 0)
+ return irq_id < 0 ? irq_id : -ENXIO;
+ ret = devm_request_irq(afe->dev, irq_id, mt8173_afe_irq_handler,
+ 0, "Afe_ISR_Handle", (void *)afe);
+ if (ret) {
+ dev_err(afe->dev, "could not request_irq\n");
+ goto err_pm_disable;
+ }
+
dev_info(&pdev->dev, "MT8173 AFE driver initialized.\n");
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 254/731] drm/amd/pm/smu11: BACO is supported when its in BACO state
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (252 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 253/731] ASoC: mediatek: mt8173: Enable IRQ when pdata is ready Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 255/731] drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios() Greg Kroah-Hartman
` (487 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lijo Lazar, Guchun Chen, Evan Quan,
Alex Deucher, Sasha Levin
From: Guchun Chen <guchun.chen@amd.com>
[ Upstream commit 6dca7efe6e522bf213c7dab691fa580d82f48f74 ]
Return true early if ASIC is in BACO state already, no need
to talk to SMU. It can fix the issue that driver was not
calling BACO exit at all in runtime pm resume, and a timing
issue leading to a PCI AER error happened eventually.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
index 614c3d049514..83fa3d20a1d5 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
@@ -1595,6 +1595,10 @@ bool smu_v11_0_baco_is_support(struct smu_context *smu)
if (amdgpu_sriov_vf(smu->adev) || !smu_baco->platform_support)
return false;
+ /* return true if ASIC is in BACO state already */
+ if (smu_v11_0_baco_get_state(smu) == SMU_BACO_STATE_ENTER)
+ return true;
+
/* Arcturus does not support this bit mask */
if (smu_cmn_feature_is_supported(smu, SMU_FEATURE_BACO_BIT) &&
!smu_cmn_feature_is_enabled(smu, SMU_FEATURE_BACO_BIT))
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 255/731] drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (253 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 254/731] drm/amd/pm/smu11: BACO is supported when its in BACO state Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 256/731] drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios() Greg Kroah-Hartman
` (486 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang, Alex Deucher, Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit 725a521a18734f65de05b8d353b5bd0d3ca4c37a ]
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in radeon_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.
Fixes: d8ade3526b2a ("drm/radeon: handle non-VGA class pci devices with ATRM")
Fixes: c61e2775873f ("drm/radeon: split ATRM support out from the ATPX handler (v3)")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/radeon/radeon_bios.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index 1d99c9a2b56e..63bdc9f6fc24 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -227,6 +227,7 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev)
if (!found)
return false;
+ pci_dev_put(pdev);
rdev->bios = kmalloc(size, GFP_KERNEL);
if (!rdev->bios) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 256/731] drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (254 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 255/731] drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 257/731] drm/amdkfd: Fix memory leakage Greg Kroah-Hartman
` (485 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang, Alex Deucher, Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit ca54639c7752edf1304d92ff4d0c049d4efc9ba0 ]
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c
index 27b19503773b..71354f505b84 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c
@@ -317,6 +317,7 @@ static bool amdgpu_atrm_get_bios(struct amdgpu_device *adev)
if (!found)
return false;
+ pci_dev_put(pdev);
adev->bios = kmalloc(size, GFP_KERNEL);
if (!adev->bios) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 257/731] drm/amdkfd: Fix memory leakage
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (255 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 256/731] drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 258/731] ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe Greg Kroah-Hartman
` (484 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Konstantin Meskhidze,
Felix Kuehling, Alex Deucher, Sasha Levin
From: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
[ Upstream commit 75818afff631e1ea785a82c3e8bb82eb0dee539c ]
This patch fixes potential memory leakage and seg fault
in _gpuvm_import_dmabuf() function
Fixes: d4ec4bdc0bd5 ("drm/amdkfd: Allow access for mmapping KFD BOs")
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
index 477ab3551177..34303dd3ada9 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
@@ -1910,7 +1910,7 @@ int amdgpu_amdkfd_gpuvm_import_dmabuf(struct kgd_dev *kgd,
ret = drm_vma_node_allow(&obj->vma_node, drm_priv);
if (ret) {
- kfree(mem);
+ kfree(*mem);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 258/731] ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (256 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 257/731] drm/amdkfd: Fix memory leakage Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 259/731] netfilter: conntrack: set icmpv6 redirects as RELATED Greg Kroah-Hartman
` (483 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zhang Qilong, Mark Brown, Sasha Levin
From: Zhang Qilong <zhangqilong3@huawei.com>
[ Upstream commit 97b801be6f8e53676b9f2b105f54e35c745c1b22 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by going to
err_pm instead of err_clk.
Fixes:f086ba9d5389c ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160402.126140-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/pcm512x.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c
index 60dee41816dc..1c26577f08ee 100644
--- a/sound/soc/codecs/pcm512x.c
+++ b/sound/soc/codecs/pcm512x.c
@@ -1635,7 +1635,7 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap)
if (val > 6) {
dev_err(dev, "Invalid pll-in\n");
ret = -EINVAL;
- goto err_clk;
+ goto err_pm;
}
pcm512x->pll_in = val;
}
@@ -1644,7 +1644,7 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap)
if (val > 6) {
dev_err(dev, "Invalid pll-out\n");
ret = -EINVAL;
- goto err_clk;
+ goto err_pm;
}
pcm512x->pll_out = val;
}
@@ -1653,12 +1653,12 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap)
dev_err(dev,
"Error: both pll-in and pll-out, or none\n");
ret = -EINVAL;
- goto err_clk;
+ goto err_pm;
}
if (pcm512x->pll_in && pcm512x->pll_in == pcm512x->pll_out) {
dev_err(dev, "Error: pll-in == pll-out\n");
ret = -EINVAL;
- goto err_clk;
+ goto err_pm;
}
}
#endif
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 259/731] netfilter: conntrack: set icmpv6 redirects as RELATED
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (257 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 258/731] ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 260/731] Input: wistron_btns - disable on UML Greg Kroah-Hartman
` (482 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eric Garver, Florian Westphal,
Pablo Neira Ayuso, Sasha Levin
From: Florian Westphal <fw@strlen.de>
[ Upstream commit 7d7cfb48d81353e826493d24c7cec7360950968f ]
icmp conntrack will set icmp redirects as RELATED, but icmpv6 will not
do this.
For icmpv6, only icmp errors (code <= 128) are examined for RELATED state.
ICMPV6 Redirects are part of neighbour discovery mechanism, those are
handled by marking a selected subset (e.g. neighbour solicitations) as
UNTRACKED, but not REDIRECT -- they will thus be flagged as INVALID.
Add minimal support for REDIRECTs. No parsing of neighbour options is
added for simplicity, so this will only check that we have the embeeded
original header (ND_OPT_REDIRECT_HDR), and then attempt to do a flow
lookup for this tuple.
Also extend the existing test case to cover redirects.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Eric Garver <eric@garver.life>
Link: https://github.com/firewalld/firewalld/issues/1046
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_conntrack_proto_icmpv6.c | 53 +++++++++++++++++++
.../netfilter/conntrack_icmp_related.sh | 36 ++++++++++++-
2 files changed, 87 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nf_conntrack_proto_icmpv6.c b/net/netfilter/nf_conntrack_proto_icmpv6.c
index 61e3b05cf02c..1020d67600a9 100644
--- a/net/netfilter/nf_conntrack_proto_icmpv6.c
+++ b/net/netfilter/nf_conntrack_proto_icmpv6.c
@@ -129,6 +129,56 @@ static void icmpv6_error_log(const struct sk_buff *skb,
nf_l4proto_log_invalid(skb, state, IPPROTO_ICMPV6, "%s", msg);
}
+static noinline_for_stack int
+nf_conntrack_icmpv6_redirect(struct nf_conn *tmpl, struct sk_buff *skb,
+ unsigned int dataoff,
+ const struct nf_hook_state *state)
+{
+ u8 hl = ipv6_hdr(skb)->hop_limit;
+ union nf_inet_addr outer_daddr;
+ union {
+ struct nd_opt_hdr nd_opt;
+ struct rd_msg rd_msg;
+ } tmp;
+ const struct nd_opt_hdr *nd_opt;
+ const struct rd_msg *rd_msg;
+
+ rd_msg = skb_header_pointer(skb, dataoff, sizeof(*rd_msg), &tmp.rd_msg);
+ if (!rd_msg) {
+ icmpv6_error_log(skb, state, "short redirect");
+ return -NF_ACCEPT;
+ }
+
+ if (rd_msg->icmph.icmp6_code != 0)
+ return NF_ACCEPT;
+
+ if (hl != 255 || !(ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL)) {
+ icmpv6_error_log(skb, state, "invalid saddr or hoplimit for redirect");
+ return -NF_ACCEPT;
+ }
+
+ dataoff += sizeof(*rd_msg);
+
+ /* warning: rd_msg no longer usable after this call */
+ nd_opt = skb_header_pointer(skb, dataoff, sizeof(*nd_opt), &tmp.nd_opt);
+ if (!nd_opt || nd_opt->nd_opt_len == 0) {
+ icmpv6_error_log(skb, state, "redirect without options");
+ return -NF_ACCEPT;
+ }
+
+ /* We could call ndisc_parse_options(), but it would need
+ * skb_linearize() and a bit more work.
+ */
+ if (nd_opt->nd_opt_type != ND_OPT_REDIRECT_HDR)
+ return NF_ACCEPT;
+
+ memcpy(&outer_daddr.ip6, &ipv6_hdr(skb)->daddr,
+ sizeof(outer_daddr.ip6));
+ dataoff += 8;
+ return nf_conntrack_inet_error(tmpl, skb, dataoff, state,
+ IPPROTO_ICMPV6, &outer_daddr);
+}
+
int nf_conntrack_icmpv6_error(struct nf_conn *tmpl,
struct sk_buff *skb,
unsigned int dataoff,
@@ -159,6 +209,9 @@ int nf_conntrack_icmpv6_error(struct nf_conn *tmpl,
return NF_ACCEPT;
}
+ if (icmp6h->icmp6_type == NDISC_REDIRECT)
+ return nf_conntrack_icmpv6_redirect(tmpl, skb, dataoff, state);
+
/* is not error message ? */
if (icmp6h->icmp6_type >= 128)
return NF_ACCEPT;
diff --git a/tools/testing/selftests/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh
index b48e1833bc89..76645aaf2b58 100755
--- a/tools/testing/selftests/netfilter/conntrack_icmp_related.sh
+++ b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh
@@ -35,6 +35,8 @@ cleanup() {
for i in 1 2;do ip netns del nsrouter$i;done
}
+trap cleanup EXIT
+
ipv4() {
echo -n 192.168.$1.2
}
@@ -146,11 +148,17 @@ ip netns exec nsclient1 nft -f - <<EOF
table inet filter {
counter unknown { }
counter related { }
+ counter redir4 { }
+ counter redir6 { }
chain input {
type filter hook input priority 0; policy accept;
- meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+ icmp type "redirect" ct state "related" counter name "redir4" accept
+ icmpv6 type "nd-redirect" ct state "related" counter name "redir6" accept
+
+ meta l4proto { icmp, icmpv6 } ct state established,untracked accept
meta l4proto { icmp, icmpv6 } ct state "related" counter name "related" accept
+
counter name "unknown" drop
}
}
@@ -279,5 +287,29 @@ else
echo "ERROR: icmp error RELATED state test has failed"
fi
-cleanup
+# add 'bad' route, expect icmp REDIRECT to be generated
+ip netns exec nsclient1 ip route add 192.168.1.42 via 192.168.1.1
+ip netns exec nsclient1 ip route add dead:1::42 via dead:1::1
+
+ip netns exec "nsclient1" ping -q -c 2 192.168.1.42 > /dev/null
+
+expect="packets 1 bytes 112"
+check_counter nsclient1 "redir4" "$expect"
+if [ $? -ne 0 ];then
+ ret=1
+fi
+
+ip netns exec "nsclient1" ping -c 1 dead:1::42 > /dev/null
+expect="packets 1 bytes 192"
+check_counter nsclient1 "redir6" "$expect"
+if [ $? -ne 0 ];then
+ ret=1
+fi
+
+if [ $ret -eq 0 ];then
+ echo "PASS: icmp redirects had RELATED state"
+else
+ echo "ERROR: icmp redirect RELATED state test has failed"
+fi
+
exit $ret
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 260/731] Input: wistron_btns - disable on UML
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (258 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 259/731] netfilter: conntrack: set icmpv6 redirects as RELATED Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 261/731] bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data Greg Kroah-Hartman
` (481 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Randy Dunlap, Dmitry Torokhov, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit b2b80d9dd14cb5b70dc254bddbc4eea932694791 ]
The wistron_btns driver calls rtc_cmos_read(), which isn't
available with UML builds, so disable this driver on UML.
Prevents this build error:
ld: drivers/input/misc/wistron_btns.o: in function `poll_bios':
wistron_btns.c:(.text+0x4be): undefined reference to `rtc_cmos_read'
Fixes: 0bbadafdc49d ("um: allow disabling NO_IOMEM") # v5.14+
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221130161604.1879-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/input/misc/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index dd5227cf8696..b5b8ddb536be 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -330,7 +330,7 @@ config INPUT_CPCAP_PWRBUTTON
config INPUT_WISTRON_BTNS
tristate "x86 Wistron laptop button interface"
- depends on X86_32
+ depends on X86_32 && !UML
select INPUT_SPARSEKMAP
select NEW_LEDS
select LEDS_CLASS
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 261/731] bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (259 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 260/731] Input: wistron_btns - disable on UML Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 262/731] bpf, sockmap: Fix missing BPF_F_INGRESS flag when using apply_bytes Greg Kroah-Hartman
` (480 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pengcheng Yang, Daniel Borkmann,
Jakub Sitnicki, Sasha Levin
From: Pengcheng Yang <yangpc@wangsu.com>
[ Upstream commit 7a9841ca025275b5b0edfb0b618934abb6ceec15 ]
In tcp_bpf_send_verdict() redirection, the eval variable is assigned to
__SK_REDIRECT after the apply_bytes data is sent, if msg has more_data,
sock_put() will be called multiple times.
We should reset the eval variable to __SK_NONE every time more_data
starts.
This causes:
IPv4: Attempt to release TCP socket in state 1 00000000b4c925d7
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 4482 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0x110
Modules linked in:
CPU: 5 PID: 4482 Comm: sockhash_bypass Kdump: loaded Not tainted 6.0.0 #1
Hardware name: Red Hat KVM, BIOS 1.11.0-2.el7 04/01/2014
Call Trace:
<TASK>
__tcp_transmit_skb+0xa1b/0xb90
? __alloc_skb+0x8c/0x1a0
? __kmalloc_node_track_caller+0x184/0x320
tcp_write_xmit+0x22a/0x1110
__tcp_push_pending_frames+0x32/0xf0
do_tcp_sendpages+0x62d/0x640
tcp_bpf_push+0xae/0x2c0
tcp_bpf_sendmsg_redir+0x260/0x410
? preempt_count_add+0x70/0xa0
tcp_bpf_send_verdict+0x386/0x4b0
tcp_bpf_sendmsg+0x21b/0x3b0
sock_sendmsg+0x58/0x70
__sys_sendto+0xfa/0x170
? xfd_validate_state+0x1d/0x80
? switch_fpu_return+0x59/0xe0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: cd9733f5d75c ("tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict function")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-2-git-send-email-yangpc@wangsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/tcp_bpf.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index 5194c6870273..a38db402994d 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -280,7 +280,7 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
bool cork = false, enospc = sk_msg_full(msg);
struct sock *sk_redir;
u32 tosend, origsize, sent, delta = 0;
- u32 eval = __SK_NONE;
+ u32 eval;
int ret;
more_data:
@@ -311,6 +311,7 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
tosend = msg->sg.size;
if (psock->apply_bytes && psock->apply_bytes < tosend)
tosend = psock->apply_bytes;
+ eval = __SK_NONE;
switch (psock->eval) {
case __SK_PASS:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 262/731] bpf, sockmap: Fix missing BPF_F_INGRESS flag when using apply_bytes
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (260 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 261/731] bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 263/731] bpf, sockmap: Fix data loss caused by using apply_bytes on ingress redirect Greg Kroah-Hartman
` (479 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pengcheng Yang, Daniel Borkmann,
Jakub Sitnicki, Sasha Levin
From: Pengcheng Yang <yangpc@wangsu.com>
[ Upstream commit a351d6087bf7d3d8440d58d3bf244ec64b89394a ]
When redirecting, we use sk_msg_to_ingress() to get the BPF_F_INGRESS
flag from the msg->flags. If apply_bytes is used and it is larger than
the current data being processed, sk_psock_msg_verdict() will not be
called when sendmsg() is called again. At this time, the msg->flags is 0,
and we lost the BPF_F_INGRESS flag.
So we need to save the BPF_F_INGRESS flag in sk_psock and use it when
redirection.
Fixes: 8934ce2fd081 ("bpf: sockmap redirect ingress support")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-3-git-send-email-yangpc@wangsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/skmsg.h | 1 +
include/net/tcp.h | 4 ++--
net/core/skmsg.c | 9 ++++++---
net/ipv4/tcp_bpf.c | 11 ++++++-----
net/tls/tls_sw.c | 6 ++++--
5 files changed, 19 insertions(+), 12 deletions(-)
diff --git a/include/linux/skmsg.h b/include/linux/skmsg.h
index ba015a77238a..6e18ca234f81 100644
--- a/include/linux/skmsg.h
+++ b/include/linux/skmsg.h
@@ -83,6 +83,7 @@ struct sk_psock {
u32 apply_bytes;
u32 cork_bytes;
u32 eval;
+ bool redir_ingress; /* undefined if sk_redir is null */
struct sk_msg *cork;
struct sk_psock_progs progs;
#if IS_ENABLED(CONFIG_BPF_STREAM_PARSER)
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 81ef95dc27ba..fdac6913b6c8 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -2243,8 +2243,8 @@ int tcp_bpf_update_proto(struct sock *sk, struct sk_psock *psock, bool restore);
void tcp_bpf_clone(const struct sock *sk, struct sock *newsk);
#endif /* CONFIG_BPF_SYSCALL */
-int tcp_bpf_sendmsg_redir(struct sock *sk, struct sk_msg *msg, u32 bytes,
- int flags);
+int tcp_bpf_sendmsg_redir(struct sock *sk, bool ingress,
+ struct sk_msg *msg, u32 bytes, int flags);
#endif /* CONFIG_NET_SOCK_MSG */
#if !defined(CONFIG_BPF_SYSCALL) || !defined(CONFIG_NET_SOCK_MSG)
diff --git a/net/core/skmsg.c b/net/core/skmsg.c
index f562f7e2bdc7..dc9b93d8f0d3 100644
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -880,13 +880,16 @@ int sk_psock_msg_verdict(struct sock *sk, struct sk_psock *psock,
ret = sk_psock_map_verd(ret, msg->sk_redir);
psock->apply_bytes = msg->apply_bytes;
if (ret == __SK_REDIRECT) {
- if (psock->sk_redir)
+ if (psock->sk_redir) {
sock_put(psock->sk_redir);
- psock->sk_redir = msg->sk_redir;
- if (!psock->sk_redir) {
+ psock->sk_redir = NULL;
+ }
+ if (!msg->sk_redir) {
ret = __SK_DROP;
goto out;
}
+ psock->redir_ingress = sk_msg_to_ingress(msg);
+ psock->sk_redir = msg->sk_redir;
sock_hold(psock->sk_redir);
}
out:
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index a38db402994d..2db868ca32af 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -131,10 +131,9 @@ static int tcp_bpf_push_locked(struct sock *sk, struct sk_msg *msg,
return ret;
}
-int tcp_bpf_sendmsg_redir(struct sock *sk, struct sk_msg *msg,
- u32 bytes, int flags)
+int tcp_bpf_sendmsg_redir(struct sock *sk, bool ingress,
+ struct sk_msg *msg, u32 bytes, int flags)
{
- bool ingress = sk_msg_to_ingress(msg);
struct sk_psock *psock = sk_psock_get(sk);
int ret;
@@ -277,7 +276,7 @@ static int tcp_bpf_recvmsg(struct sock *sk, struct msghdr *msg, size_t len,
static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
struct sk_msg *msg, int *copied, int flags)
{
- bool cork = false, enospc = sk_msg_full(msg);
+ bool cork = false, enospc = sk_msg_full(msg), redir_ingress;
struct sock *sk_redir;
u32 tosend, origsize, sent, delta = 0;
u32 eval;
@@ -323,6 +322,7 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
sk_msg_apply_bytes(psock, tosend);
break;
case __SK_REDIRECT:
+ redir_ingress = psock->redir_ingress;
sk_redir = psock->sk_redir;
sk_msg_apply_bytes(psock, tosend);
if (!psock->apply_bytes) {
@@ -339,7 +339,8 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
release_sock(sk);
origsize = msg->sg.size;
- ret = tcp_bpf_sendmsg_redir(sk_redir, msg, tosend, flags);
+ ret = tcp_bpf_sendmsg_redir(sk_redir, redir_ingress,
+ msg, tosend, flags);
sent = origsize - msg->sg.size;
if (eval == __SK_REDIRECT)
diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c
index 794ef3b3d7d4..c0fea678abb1 100644
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -801,7 +801,7 @@ static int bpf_exec_tx_verdict(struct sk_msg *msg, struct sock *sk,
struct sk_psock *psock;
struct sock *sk_redir;
struct tls_rec *rec;
- bool enospc, policy;
+ bool enospc, policy, redir_ingress;
int err = 0, send;
u32 delta = 0;
@@ -846,6 +846,7 @@ static int bpf_exec_tx_verdict(struct sk_msg *msg, struct sock *sk,
}
break;
case __SK_REDIRECT:
+ redir_ingress = psock->redir_ingress;
sk_redir = psock->sk_redir;
memcpy(&msg_redir, msg, sizeof(*msg));
if (msg->apply_bytes < send)
@@ -855,7 +856,8 @@ static int bpf_exec_tx_verdict(struct sk_msg *msg, struct sock *sk,
sk_msg_return_zero(sk, msg, send);
msg->sg.size -= send;
release_sock(sk);
- err = tcp_bpf_sendmsg_redir(sk_redir, &msg_redir, send, flags);
+ err = tcp_bpf_sendmsg_redir(sk_redir, redir_ingress,
+ &msg_redir, send, flags);
lock_sock(sk);
if (err < 0) {
*copied -= sk_msg_free_nocharge(sk, &msg_redir);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 263/731] bpf, sockmap: Fix data loss caused by using apply_bytes on ingress redirect
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (261 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 262/731] bpf, sockmap: Fix missing BPF_F_INGRESS flag when using apply_bytes Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 264/731] bonding: uninitialized variable in bond_miimon_inspect() Greg Kroah-Hartman
` (478 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pengcheng Yang, Daniel Borkmann,
Jakub Sitnicki, Sasha Levin
From: Pengcheng Yang <yangpc@wangsu.com>
[ Upstream commit 9072931f020bfd907d6d89ee21ff1481cd78b407 ]
Use apply_bytes on ingress redirect, when apply_bytes is less than
the length of msg data, some data may be skipped and lost in
bpf_tcp_ingress().
If there is still data in the scatterlist that has not been consumed,
we cannot move the msg iter.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-4-git-send-email-yangpc@wangsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/tcp_bpf.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index 2db868ca32af..b4b642e3de78 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -45,8 +45,11 @@ static int bpf_tcp_ingress(struct sock *sk, struct sk_psock *psock,
tmp->sg.end = i;
if (apply) {
apply_bytes -= size;
- if (!apply_bytes)
+ if (!apply_bytes) {
+ if (sge->length)
+ sk_msg_iter_var_prev(i);
break;
+ }
}
} while (i != msg->sg.end);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 264/731] bonding: uninitialized variable in bond_miimon_inspect()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (262 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 263/731] bpf, sockmap: Fix data loss caused by using apply_bytes on ingress redirect Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 265/731] spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE Greg Kroah-Hartman
` (477 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dan Carpenter, Pavan Chebbi,
Jay Vosburgh, Paolo Abeni, Sasha Levin
From: Dan Carpenter <error27@gmail.com>
[ Upstream commit e5214f363dabca240446272dac54d404501ad5e5 ]
The "ignore_updelay" variable needs to be initialized to false.
Fixes: f8a65ab2f3ff ("bonding: fix link recovery in mode 2 when updelay is nonzero")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/Y4SWJlh3ohJ6EPTL@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/bonding/bond_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6dca5bfe8247..456298919d54 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2499,10 +2499,10 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in
/* called with rcu_read_lock() */
static int bond_miimon_inspect(struct bonding *bond)
{
+ bool ignore_updelay = false;
int link_state, commit = 0;
struct list_head *iter;
struct slave *slave;
- bool ignore_updelay;
if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) {
ignore_updelay = !rcu_dereference(bond->curr_active_slave);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 265/731] spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (263 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 264/731] bonding: uninitialized variable in bond_miimon_inspect() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 266/731] wifi: mac80211: fix memory leak in ieee80211_if_add() Greg Kroah-Hartman
` (476 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexander Sverdlin, Mark Brown, Sasha Levin
From: Alexander Sverdlin <alexander.sverdlin@siemens.com>
[ Upstream commit 7dbfa445ff7393d1c4c066c1727c9e0af1251958 ]
Commit f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs")
has changed the user-space interface so that bogus SPI_CS_HIGH started
to appear in the mask returned by SPI_IOC_RD_MODE even for active-low CS
pins. Commit 138c9c32f090
("spi: spidev: Fix CS polarity if GPIO descriptors are used") fixed only
SPI_IOC_WR_MODE part of the problem. Let's fix SPI_IOC_RD_MODE
symmetrically.
Test case:
#include <sys/ioctl.h>
#include <fcntl.h>
#include <linux/spi/spidev.h>
int main(int argc, char **argv)
{
char modew = SPI_CPHA;
char moder;
int f = open("/dev/spidev0.0", O_RDWR);
if (f < 0)
return 1;
ioctl(f, SPI_IOC_WR_MODE, &modew);
ioctl(f, SPI_IOC_RD_MODE, &moder);
return moder == modew ? 0 : 2;
}
Fixes: f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20221130162927.539512-1-alexander.sverdlin@siemens.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spidev.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 1bd73e322b7b..d233e2424ad1 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -376,12 +376,23 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
switch (cmd) {
/* read requests */
case SPI_IOC_RD_MODE:
- retval = put_user(spi->mode & SPI_MODE_MASK,
- (__u8 __user *)arg);
- break;
case SPI_IOC_RD_MODE32:
- retval = put_user(spi->mode & SPI_MODE_MASK,
- (__u32 __user *)arg);
+ tmp = spi->mode;
+
+ {
+ struct spi_controller *ctlr = spi->controller;
+
+ if (ctlr->use_gpio_descriptors && ctlr->cs_gpiods &&
+ ctlr->cs_gpiods[spi->chip_select])
+ tmp &= ~SPI_CS_HIGH;
+ }
+
+ if (cmd == SPI_IOC_RD_MODE)
+ retval = put_user(tmp & SPI_MODE_MASK,
+ (__u8 __user *)arg);
+ else
+ retval = put_user(tmp & SPI_MODE_MASK,
+ (__u32 __user *)arg);
break;
case SPI_IOC_RD_LSB_FIRST:
retval = put_user((spi->mode & SPI_LSB_FIRST) ? 1 : 0,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 266/731] wifi: mac80211: fix memory leak in ieee80211_if_add()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (264 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 265/731] spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 267/731] wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() fails Greg Kroah-Hartman
` (475 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhengchao Shao, Johannes Berg, Sasha Levin
From: Zhengchao Shao <shaozhengchao@huawei.com>
[ Upstream commit 13e5afd3d773c6fc6ca2b89027befaaaa1ea7293 ]
When register_netdevice() failed in ieee80211_if_add(), ndev->tstats
isn't released. Fix it.
Fixes: 5a490510ba5f ("mac80211: use per-CPU TX/RX statistics")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221117064500.319983-1-shaozhengchao@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mac80211/iface.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 041859b5b71d..a3347f245782 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -2059,6 +2059,7 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
ret = cfg80211_register_netdevice(ndev);
if (ret) {
+ ieee80211_if_free(ndev);
free_netdev(ndev);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 267/731] wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() fails
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (265 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 266/731] wifi: mac80211: fix memory leak in ieee80211_if_add() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 268/731] mt76: stop the radar detector after leaving dfs channel Greg Kroah-Hartman
` (474 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen Zhongjin, Johannes Berg, Sasha Levin
From: Chen Zhongjin <chenzhongjin@huawei.com>
[ Upstream commit 833a9fd28c9b7ccb39a334721379e992dc1c0c89 ]
In regulatory_init_db(), when it's going to return a error, reg_pdev
should be unregistered. When load_builtin_regdb_keys() fails it doesn't
do it and makes cfg80211 can't be reload with report:
sysfs: cannot create duplicate filename '/devices/platform/regulatory.0'
...
<TASK>
dump_stack_lvl+0x79/0x9b
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x22d/0x290
kobject_add_internal+0x247/0x800
kobject_add+0x135/0x1b0
device_add+0x389/0x1be0
platform_device_add+0x28f/0x790
platform_device_register_full+0x376/0x4b0
regulatory_init+0x9a/0x4b2 [cfg80211]
cfg80211_init+0x84/0x113 [cfg80211]
...
Fixes: 90a53e4432b1 ("cfg80211: implement regdb signature checking")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221109090237.214127-1-chenzhongjin@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/wireless/reg.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 7b19a2087db9..d0fbe822e793 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -4247,8 +4247,10 @@ static int __init regulatory_init_db(void)
return -EINVAL;
err = load_builtin_regdb_keys();
- if (err)
+ if (err) {
+ platform_device_unregister(reg_pdev);
return err;
+ }
/* We always try to get an update for the static regdomain */
err = regulatory_hint_core(cfg80211_world_regdom->alpha2);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 268/731] mt76: stop the radar detector after leaving dfs channel
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (266 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 267/731] wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() fails Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 269/731] wifi: mt76: mt7921: fix reporting of TX AGGR histogram Greg Kroah-Hartman
` (473 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Xing Song, Felix Fietkau, Sasha Levin
From: Xing Song <xing.song@mediatek.com>
[ Upstream commit 4e58ef4b6d727abdb071f7799aef763f8d6f2ad8 ]
The radar detctor is used for dfs channel. So it will start after switching
to dfs channel and will stop after leaving. The TX will be blocked if radar
detctor isn't stopped in non-dfs channel.
This patch resets the dfs state to indicate the radar detector needs to be
stopped.
Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 3 ++-
drivers/net/wireless/mediatek/mt76/mt7915/main.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index 8f1338dae211..96667b7d722d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -290,7 +290,8 @@ static void mt7615_init_dfs_state(struct mt7615_phy *phy)
if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
return;
- if (!(chandef->chan->flags & IEEE80211_CHAN_RADAR))
+ if (!(chandef->chan->flags & IEEE80211_CHAN_RADAR) &&
+ !(mphy->chandef.chan->flags & IEEE80211_CHAN_RADAR))
return;
if (mphy->chandef.chan->center_freq == chandef->chan->center_freq &&
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index 6aca470e2401..7a4f277a1622 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -302,7 +302,8 @@ static void mt7915_init_dfs_state(struct mt7915_phy *phy)
if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
return;
- if (!(chandef->chan->flags & IEEE80211_CHAN_RADAR))
+ if (!(chandef->chan->flags & IEEE80211_CHAN_RADAR) &&
+ !(mphy->chandef.chan->flags & IEEE80211_CHAN_RADAR))
return;
if (mphy->chandef.chan->center_freq == chandef->chan->center_freq &&
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 269/731] wifi: mt76: mt7921: fix reporting of TX AGGR histogram
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (267 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 268/731] mt76: stop the radar detector after leaving dfs channel Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 270/731] wifi: mt76: fix coverity overrun-call in mt76_get_txpower() Greg Kroah-Hartman
` (472 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lorenzo Bianconi, Felix Fietkau,
Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 028b4f22b37b88821fd87b56ce47b180583c774e ]
Similar to mt7915, fix stats clash between bins [4-7] in 802.11 tx
aggregation histogram.
Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index 426e7a32bdc8..6cf0c9b1b8b9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -1476,7 +1476,7 @@ mt7921_mac_update_mib_stats(struct mt7921_phy *phy)
mib->rts_retries_cnt += mt76_get_field(dev, MT_MIB_MB_BSDR1(0),
MT_MIB_RTS_FAIL_COUNT_MASK);
- for (i = 0, aggr1 = aggr0 + 4; i < 4; i++) {
+ for (i = 0, aggr1 = aggr0 + 8; i < 4; i++) {
u32 val, val2;
val = mt76_rr(dev, MT_TX_AGG_CNT(0, i));
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 270/731] wifi: mt76: fix coverity overrun-call in mt76_get_txpower()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (268 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 269/731] wifi: mt76: mt7921: fix reporting of TX AGGR histogram Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 271/731] regulator: core: fix module refcount leak in set_supply() Greg Kroah-Hartman
` (471 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Deren Wu, Felix Fietkau, Sasha Levin
From: Deren Wu <deren.wu@mediatek.com>
[ Upstream commit 03dd0d49de7db680a856fa566963bb8421f46368 ]
Make sure the nss is valid for nss_delta array. Return zero
if the index is invalid.
Coverity message:
Event overrun-call: Overrunning callee's array of size 4 by passing
argument "n_chains" (which evaluates to 15) in call to
"mt76_tx_power_nss_delta".
int delta = mt76_tx_power_nss_delta(n_chains);
Fixes: 07cda406308b ("mt76: fix rounding issues on converting per-chain and combined txpower")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt76.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index d1f00706d41e..4e4af6e17b50 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -1021,8 +1021,9 @@ static inline bool mt76_is_skb_pktid(u8 pktid)
static inline u8 mt76_tx_power_nss_delta(u8 nss)
{
static const u8 nss_delta[4] = { 0, 6, 9, 12 };
+ u8 idx = nss - 1;
- return nss_delta[nss - 1];
+ return (idx < ARRAY_SIZE(nss_delta)) ? nss_delta[idx] : 0;
}
static inline bool mt76_testmode_enabled(struct mt76_phy *phy)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 271/731] regulator: core: fix module refcount leak in set_supply()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (269 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 270/731] wifi: mt76: fix coverity overrun-call in mt76_get_txpower() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 272/731] clk: qcom: lpass-sc7180: Fix pm_runtime usage Greg Kroah-Hartman
` (470 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Mark Brown, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit da46ee19cbd8344d6860816b4827a7ce95764867 ]
If create_regulator() fails in set_supply(), the module refcount
needs be put to keep refcount balanced.
Fixes: e2c09ae7a74d ("regulator: core: Increase refcount for regulator supply's module")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221201122706.4055992-2-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 65900895a0b2..ab93debb817c 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1577,6 +1577,7 @@ static int set_supply(struct regulator_dev *rdev,
rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY");
if (rdev->supply == NULL) {
+ module_put(supply_rdev->owner);
err = -ENOMEM;
return err;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 272/731] clk: qcom: lpass-sc7180: Fix pm_runtime usage
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (270 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 271/731] regulator: core: fix module refcount leak in set_supply() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 273/731] clk: qcom: clk-krait: fix wrong div2 functions Greg Kroah-Hartman
` (469 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Douglas Anderson, Stephen Boyd,
Bjorn Andersson, Sasha Levin
From: Douglas Anderson <dianders@chromium.org>
[ Upstream commit ff1ccf59eaffd192efe21f7de9fb0c130faf1b1b ]
The sc7180 lpass clock controller's pm_runtime usage wasn't broken
quite as spectacularly as the sc7280's pm_runtime usage, but it was
still broken. Putting some printouts in at boot showed me this (with
serial console enabled, which makes the prints slow and thus changes
timing):
[ 3.109951] DOUG: my_pm_clk_resume, usage=1
[ 3.114767] DOUG: my_pm_clk_resume, usage=1
[ 3.664443] DOUG: my_pm_clk_suspend, usage=0
[ 3.897566] DOUG: my_pm_clk_suspend, usage=0
[ 3.910137] DOUG: my_pm_clk_resume, usage=1
[ 3.923217] DOUG: my_pm_clk_resume, usage=0
[ 4.440116] DOUG: my_pm_clk_suspend, usage=-1
[ 4.444982] DOUG: my_pm_clk_suspend, usage=0
[ 14.170501] DOUG: my_pm_clk_resume, usage=1
[ 14.176245] DOUG: my_pm_clk_resume, usage=0
...or this w/out serial console:
[ 0.556139] DOUG: my_pm_clk_resume, usage=1
[ 0.556279] DOUG: my_pm_clk_resume, usage=1
[ 1.058422] DOUG: my_pm_clk_suspend, usage=-1
[ 1.058464] DOUG: my_pm_clk_suspend, usage=0
[ 1.186250] DOUG: my_pm_clk_resume, usage=1
[ 1.186292] DOUG: my_pm_clk_resume, usage=0
[ 1.731536] DOUG: my_pm_clk_suspend, usage=-1
[ 1.731557] DOUG: my_pm_clk_suspend, usage=0
[ 10.288910] DOUG: my_pm_clk_resume, usage=1
[ 10.289496] DOUG: my_pm_clk_resume, usage=0
It seems to be doing roughly the right sequence of calls, but just
like with sc7280 this is more by luck than anything. Having a usage of
-1 is just not OK.
Let's fix this like we did with sc7280.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Fixes: ce8c195e652f ("clk: qcom: lpasscc: Introduce pm autosuspend for SC7180")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104064055.2.I49b25b9bda9430fc7ea21e5a708ca5a0aced2798@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/qcom/lpasscorecc-sc7180.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/qcom/lpasscorecc-sc7180.c b/drivers/clk/qcom/lpasscorecc-sc7180.c
index ac09b7b840ab..a5731994cbed 100644
--- a/drivers/clk/qcom/lpasscorecc-sc7180.c
+++ b/drivers/clk/qcom/lpasscorecc-sc7180.c
@@ -356,7 +356,7 @@ static const struct qcom_cc_desc lpass_audio_hm_sc7180_desc = {
.num_gdscs = ARRAY_SIZE(lpass_audio_hm_sc7180_gdscs),
};
-static int lpass_create_pm_clks(struct platform_device *pdev)
+static int lpass_setup_runtime_pm(struct platform_device *pdev)
{
int ret;
@@ -375,7 +375,7 @@ static int lpass_create_pm_clks(struct platform_device *pdev)
if (ret < 0)
dev_err(&pdev->dev, "failed to acquire iface clock\n");
- return ret;
+ return pm_runtime_resume_and_get(&pdev->dev);
}
static int lpass_core_cc_sc7180_probe(struct platform_device *pdev)
@@ -384,7 +384,7 @@ static int lpass_core_cc_sc7180_probe(struct platform_device *pdev)
struct regmap *regmap;
int ret;
- ret = lpass_create_pm_clks(pdev);
+ ret = lpass_setup_runtime_pm(pdev);
if (ret)
return ret;
@@ -392,12 +392,14 @@ static int lpass_core_cc_sc7180_probe(struct platform_device *pdev)
desc = &lpass_audio_hm_sc7180_desc;
ret = qcom_cc_probe_by_index(pdev, 1, desc);
if (ret)
- return ret;
+ goto exit;
lpass_core_cc_sc7180_regmap_config.name = "lpass_core_cc";
regmap = qcom_cc_map(pdev, &lpass_core_cc_sc7180_desc);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ goto exit;
+ }
/*
* Keep the CLK always-ON
@@ -415,6 +417,7 @@ static int lpass_core_cc_sc7180_probe(struct platform_device *pdev)
ret = qcom_cc_really_probe(pdev, &lpass_core_cc_sc7180_desc, regmap);
pm_runtime_mark_last_busy(&pdev->dev);
+exit:
pm_runtime_put_autosuspend(&pdev->dev);
return ret;
@@ -425,14 +428,19 @@ static int lpass_hm_core_probe(struct platform_device *pdev)
const struct qcom_cc_desc *desc;
int ret;
- ret = lpass_create_pm_clks(pdev);
+ ret = lpass_setup_runtime_pm(pdev);
if (ret)
return ret;
lpass_core_cc_sc7180_regmap_config.name = "lpass_hm_core";
desc = &lpass_core_hm_sc7180_desc;
- return qcom_cc_probe_by_index(pdev, 0, desc);
+ ret = qcom_cc_probe_by_index(pdev, 0, desc);
+
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
+ return ret;
}
static const struct of_device_id lpass_hm_sc7180_match_table[] = {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 273/731] clk: qcom: clk-krait: fix wrong div2 functions
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (271 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 272/731] clk: qcom: lpass-sc7180: Fix pm_runtime usage Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 274/731] hsr: Add a rcu-read lock to hsr_forward_skb() Greg Kroah-Hartman
` (468 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christian Marangi, Bjorn Andersson,
Sasha Levin
From: Christian Marangi <ansuelsmth@gmail.com>
[ Upstream commit d676d3a3717cf726d3affedbe5ba98fc4ccad7b3 ]
Currently div2 value is applied to the wrong bits. This is caused by a
bug in the code where the shift is done only for lpl, for anything
else the mask is not shifted to the correct bits.
Fix this by correctly shift if lpl is not supported.
Fixes: 4d7dc77babfe ("clk: qcom: Add support for Krait clocks")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108215625.30186-1-ansuelsmth@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/qcom/clk-krait.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/qcom/clk-krait.c b/drivers/clk/qcom/clk-krait.c
index 90046428693c..e74fc81a14d0 100644
--- a/drivers/clk/qcom/clk-krait.c
+++ b/drivers/clk/qcom/clk-krait.c
@@ -98,6 +98,8 @@ static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate,
if (d->lpl)
mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift;
+ else
+ mask <<= d->shift;
spin_lock_irqsave(&krait_clock_reg_lock, flags);
val = krait_get_l2_indirect_reg(d->offset);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 274/731] hsr: Add a rcu-read lock to hsr_forward_skb().
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (272 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 273/731] clk: qcom: clk-krait: fix wrong div2 functions Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 275/731] hsr: Avoid double remove of a node Greg Kroah-Hartman
` (467 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sebastian Andrzej Siewior,
Jakub Kicinski, Sasha Levin
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ Upstream commit 5aa2820177af650293b2f9f1873c1f6f8e4ad7a4 ]
hsr_forward_skb() a skb and keeps information in an on-stack
hsr_frame_info. hsr_get_node() assigns hsr_frame_info::node_src which is
from a RCU list. This pointer is used later in hsr_forward_do().
I don't see a reason why this pointer can't vanish midway since there is
no guarantee that hsr_forward_skb() is invoked from an RCU read section.
Use rcu_read_lock() to protect hsr_frame_info::node_src from its
assignment until it is no longer used.
Fixes: f266a683a4804 ("net/hsr: Better frame dispatch")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/hsr/hsr_forward.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/hsr/hsr_forward.c b/net/hsr/hsr_forward.c
index 07892c4b6d0c..daf6abbadeb9 100644
--- a/net/hsr/hsr_forward.c
+++ b/net/hsr/hsr_forward.c
@@ -572,11 +572,13 @@ void hsr_forward_skb(struct sk_buff *skb, struct hsr_port *port)
{
struct hsr_frame_info frame;
+ rcu_read_lock();
if (fill_frame_info(&frame, skb, port) < 0)
goto out_drop;
hsr_register_frame_in(frame.node_src, port, frame.sequence_nr);
hsr_forward_do(&frame);
+ rcu_read_unlock();
/* Gets called for ingress frames as well as egress from master port.
* So check and increment stats for master port only here.
*/
@@ -591,6 +593,7 @@ void hsr_forward_skb(struct sk_buff *skb, struct hsr_port *port)
return;
out_drop:
+ rcu_read_unlock();
port->dev->stats.tx_dropped++;
kfree_skb(skb);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 275/731] hsr: Avoid double remove of a node.
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (273 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 274/731] hsr: Add a rcu-read lock to hsr_forward_skb() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 276/731] hsr: Disable netpoll Greg Kroah-Hartman
` (466 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sebastian Andrzej Siewior,
Jakub Kicinski, Sasha Levin
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ Upstream commit 0c74d9f79ec4299365bbe803baa736ae0068179e ]
Due to the hashed-MAC optimisation one problem become visible:
hsr_handle_sup_frame() walks over the list of available nodes and merges
two node entries into one if based on the information in the supervision
both MAC addresses belong to one node. The list-walk happens on a RCU
protected list and delete operation happens under a lock.
If the supervision arrives on both slave interfaces at the same time
then this delete operation can occur simultaneously on two CPUs. The
result is the first-CPU deletes the from the list and the second CPUs
BUGs while attempting to dereference a poisoned list-entry. This happens
more likely with the optimisation because a new node for the mac_B entry
is created once a packet has been received and removed (merged) once the
supervision frame has been received.
Avoid removing/ cleaning up a hsr_node twice by adding a `removed' field
which is set to true after the removal and checked before the removal.
Fixes: f266a683a4804 ("net/hsr: Better frame dispatch")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/hsr/hsr_framereg.c | 16 +++++++++++-----
net/hsr/hsr_framereg.h | 1 +
2 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/net/hsr/hsr_framereg.c b/net/hsr/hsr_framereg.c
index e31949479305..440788e5b3e2 100644
--- a/net/hsr/hsr_framereg.c
+++ b/net/hsr/hsr_framereg.c
@@ -326,9 +326,12 @@ void hsr_handle_sup_frame(struct hsr_frame_info *frame)
node_real->addr_B_port = port_rcv->type;
spin_lock_bh(&hsr->list_lock);
- list_del_rcu(&node_curr->mac_list);
+ if (!node_curr->removed) {
+ list_del_rcu(&node_curr->mac_list);
+ node_curr->removed = true;
+ kfree_rcu(node_curr, rcu_head);
+ }
spin_unlock_bh(&hsr->list_lock);
- kfree_rcu(node_curr, rcu_head);
done:
/* PRP uses v0 header */
@@ -502,9 +505,12 @@ void hsr_prune_nodes(struct timer_list *t)
if (time_is_before_jiffies(timestamp +
msecs_to_jiffies(HSR_NODE_FORGET_TIME))) {
hsr_nl_nodedown(hsr, node->macaddress_A);
- list_del_rcu(&node->mac_list);
- /* Note that we need to free this entry later: */
- kfree_rcu(node, rcu_head);
+ if (!node->removed) {
+ list_del_rcu(&node->mac_list);
+ node->removed = true;
+ /* Note that we need to free this entry later: */
+ kfree_rcu(node, rcu_head);
+ }
}
}
spin_unlock_bh(&hsr->list_lock);
diff --git a/net/hsr/hsr_framereg.h b/net/hsr/hsr_framereg.h
index d9628e7a5f05..f9c83dc02ca5 100644
--- a/net/hsr/hsr_framereg.h
+++ b/net/hsr/hsr_framereg.h
@@ -80,6 +80,7 @@ struct hsr_node {
bool san_a;
bool san_b;
u16 seq_out[HSR_PT_PORTS];
+ bool removed;
struct rcu_head rcu_head;
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 276/731] hsr: Disable netpoll.
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (274 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 275/731] hsr: Avoid double remove of a node Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 277/731] hsr: Synchronize sending frames to have always incremented outgoing seq nr Greg Kroah-Hartman
` (465 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sebastian Andrzej Siewior,
Jakub Kicinski, Sasha Levin
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ Upstream commit d5c7652eb16fa203d82546e0285136d7b321ffa9 ]
The hsr device is a software device. Its
net_device_ops::ndo_start_xmit() routine will process the packet and
then pass the resulting skb to dev_queue_xmit().
During processing, hsr acquires a lock with spin_lock_bh()
(hsr_add_node()) which needs to be promoted to the _irq() suffix in
order to avoid a potential deadlock.
Then there are the warnings in dev_queue_xmit() (due to
local_bh_disable() with disabled interrupts) left.
Instead trying to address those (there is qdisc and…) for netpoll sake,
just disable netpoll on hsr.
Disable netpoll on hsr and replace the _irqsave() locking with _bh().
Fixes: f421436a591d3 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/hsr/hsr_device.c | 14 ++++++--------
net/hsr/hsr_forward.c | 5 ++---
2 files changed, 8 insertions(+), 11 deletions(-)
diff --git a/net/hsr/hsr_device.c b/net/hsr/hsr_device.c
index a1045c3d71b4..c44c6747a0bf 100644
--- a/net/hsr/hsr_device.c
+++ b/net/hsr/hsr_device.c
@@ -278,7 +278,6 @@ static void send_hsr_supervision_frame(struct hsr_port *master,
__u8 type = HSR_TLV_LIFE_CHECK;
struct hsr_sup_payload *hsr_sp;
struct hsr_sup_tag *hsr_stag;
- unsigned long irqflags;
struct sk_buff *skb;
*interval = msecs_to_jiffies(HSR_LIFE_CHECK_INTERVAL);
@@ -299,7 +298,7 @@ static void send_hsr_supervision_frame(struct hsr_port *master,
set_hsr_stag_HSR_ver(hsr_stag, hsr->prot_version);
/* From HSRv1 on we have separate supervision sequence numbers. */
- spin_lock_irqsave(&master->hsr->seqnr_lock, irqflags);
+ spin_lock_bh(&hsr->seqnr_lock);
if (hsr->prot_version > 0) {
hsr_stag->sequence_nr = htons(hsr->sup_sequence_nr);
hsr->sup_sequence_nr++;
@@ -307,7 +306,7 @@ static void send_hsr_supervision_frame(struct hsr_port *master,
hsr_stag->sequence_nr = htons(hsr->sequence_nr);
hsr->sequence_nr++;
}
- spin_unlock_irqrestore(&master->hsr->seqnr_lock, irqflags);
+ spin_unlock_bh(&hsr->seqnr_lock);
hsr_stag->HSR_TLV_type = type;
/* TODO: Why 12 in HSRv0? */
@@ -332,7 +331,6 @@ static void send_prp_supervision_frame(struct hsr_port *master,
struct hsr_priv *hsr = master->hsr;
struct hsr_sup_payload *hsr_sp;
struct hsr_sup_tag *hsr_stag;
- unsigned long irqflags;
struct sk_buff *skb;
skb = hsr_init_skb(master);
@@ -347,7 +345,7 @@ static void send_prp_supervision_frame(struct hsr_port *master,
set_hsr_stag_HSR_ver(hsr_stag, (hsr->prot_version ? 1 : 0));
/* From HSRv1 on we have separate supervision sequence numbers. */
- spin_lock_irqsave(&master->hsr->seqnr_lock, irqflags);
+ spin_lock_bh(&hsr->seqnr_lock);
hsr_stag->sequence_nr = htons(hsr->sup_sequence_nr);
hsr->sup_sequence_nr++;
hsr_stag->HSR_TLV_type = PRP_TLV_LIFE_CHECK_DD;
@@ -358,11 +356,11 @@ static void send_prp_supervision_frame(struct hsr_port *master,
ether_addr_copy(hsr_sp->macaddress_A, master->dev->dev_addr);
if (skb_put_padto(skb, ETH_ZLEN)) {
- spin_unlock_irqrestore(&master->hsr->seqnr_lock, irqflags);
+ spin_unlock_bh(&hsr->seqnr_lock);
return;
}
- spin_unlock_irqrestore(&master->hsr->seqnr_lock, irqflags);
+ spin_unlock_bh(&hsr->seqnr_lock);
hsr_forward_skb(skb, master);
}
@@ -444,7 +442,7 @@ void hsr_dev_setup(struct net_device *dev)
dev->header_ops = &hsr_header_ops;
dev->netdev_ops = &hsr_device_ops;
SET_NETDEV_DEVTYPE(dev, &hsr_type);
- dev->priv_flags |= IFF_NO_QUEUE;
+ dev->priv_flags |= IFF_NO_QUEUE | IFF_DISABLE_NETPOLL;
dev->needs_free_netdev = true;
diff --git a/net/hsr/hsr_forward.c b/net/hsr/hsr_forward.c
index daf6abbadeb9..c8bcbd990f59 100644
--- a/net/hsr/hsr_forward.c
+++ b/net/hsr/hsr_forward.c
@@ -458,7 +458,6 @@ static void handle_std_frame(struct sk_buff *skb,
{
struct hsr_port *port = frame->port_rcv;
struct hsr_priv *hsr = port->hsr;
- unsigned long irqflags;
frame->skb_hsr = NULL;
frame->skb_prp = NULL;
@@ -468,10 +467,10 @@ static void handle_std_frame(struct sk_buff *skb,
frame->is_from_san = true;
} else {
/* Sequence nr for the master node */
- spin_lock_irqsave(&hsr->seqnr_lock, irqflags);
+ spin_lock_bh(&hsr->seqnr_lock);
frame->sequence_nr = hsr->sequence_nr;
hsr->sequence_nr++;
- spin_unlock_irqrestore(&hsr->seqnr_lock, irqflags);
+ spin_unlock_bh(&hsr->seqnr_lock);
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 277/731] hsr: Synchronize sending frames to have always incremented outgoing seq nr.
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (275 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 276/731] hsr: Disable netpoll Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 278/731] hsr: Synchronize sequence number updates Greg Kroah-Hartman
` (464 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sebastian Andrzej Siewior,
Jakub Kicinski, Sasha Levin
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ Upstream commit 06afd2c31d338fa762548580c1bf088703dd1e03 ]
Sending frames via the hsr (master) device requires a sequence number
which is tracked in hsr_priv::sequence_nr and protected by
hsr_priv::seqnr_lock. Each time a new frame is sent, it will obtain a
new id and then send it via the slave devices.
Each time a packet is sent (via hsr_forward_do()) the sequence number is
checked via hsr_register_frame_out() to ensure that a frame is not
handled twice. This make sense for the receiving side to ensure that the
frame is not injected into the stack twice after it has been received
from both slave ports.
There is no locking to cover the sending path which means the following
scenario is possible:
CPU0 CPU1
hsr_dev_xmit(skb1) hsr_dev_xmit(skb2)
fill_frame_info() fill_frame_info()
hsr_fill_frame_info() hsr_fill_frame_info()
handle_std_frame() handle_std_frame()
skb1's sequence_nr = 1
skb2's sequence_nr = 2
hsr_forward_do() hsr_forward_do()
hsr_register_frame_out(, 2) // okay, send)
hsr_register_frame_out(, 1) // stop, lower seq duplicate
Both skbs (or their struct hsr_frame_info) received an unique id.
However since skb2 was sent before skb1, the higher sequence number was
recorded in hsr_register_frame_out() and the late arriving skb1 was
dropped and never sent.
This scenario has been observed in a three node HSR setup, with node1 +
node2 having ping and iperf running in parallel. From time to time ping
reported a missing packet. Based on tracing that missing ping packet did
not leave the system.
It might be possible (didn't check) to drop the sequence number check on
the sending side. But if the higher sequence number leaves on wire
before the lower does and the destination receives them in that order
and it will drop the packet with the lower sequence number and never
inject into the stack.
Therefore it seems the only way is to lock the whole path from obtaining
the sequence number and sending via dev_queue_xmit() and assuming the
packets leave on wire in the same order (and don't get reordered by the
NIC).
Cover the whole path for the master interface from obtaining the ID
until after it has been forwarded via hsr_forward_skb() to ensure the
skbs are sent to the NIC in the order of the assigned sequence numbers.
Fixes: f421436a591d3 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/hsr/hsr_device.c | 12 +++++++-----
net/hsr/hsr_forward.c | 3 +--
2 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/net/hsr/hsr_device.c b/net/hsr/hsr_device.c
index c44c6747a0bf..7ce40b49c956 100644
--- a/net/hsr/hsr_device.c
+++ b/net/hsr/hsr_device.c
@@ -219,7 +219,9 @@ static netdev_tx_t hsr_dev_xmit(struct sk_buff *skb, struct net_device *dev)
skb->dev = master->dev;
skb_reset_mac_header(skb);
skb_reset_mac_len(skb);
+ spin_lock_bh(&hsr->seqnr_lock);
hsr_forward_skb(skb, master);
+ spin_unlock_bh(&hsr->seqnr_lock);
} else {
atomic_long_inc(&dev->tx_dropped);
dev_kfree_skb_any(skb);
@@ -306,7 +308,6 @@ static void send_hsr_supervision_frame(struct hsr_port *master,
hsr_stag->sequence_nr = htons(hsr->sequence_nr);
hsr->sequence_nr++;
}
- spin_unlock_bh(&hsr->seqnr_lock);
hsr_stag->HSR_TLV_type = type;
/* TODO: Why 12 in HSRv0? */
@@ -317,11 +318,13 @@ static void send_hsr_supervision_frame(struct hsr_port *master,
hsr_sp = skb_put(skb, sizeof(struct hsr_sup_payload));
ether_addr_copy(hsr_sp->macaddress_A, master->dev->dev_addr);
- if (skb_put_padto(skb, ETH_ZLEN))
+ if (skb_put_padto(skb, ETH_ZLEN)) {
+ spin_unlock_bh(&hsr->seqnr_lock);
return;
+ }
hsr_forward_skb(skb, master);
-
+ spin_unlock_bh(&hsr->seqnr_lock);
return;
}
@@ -360,9 +363,8 @@ static void send_prp_supervision_frame(struct hsr_port *master,
return;
}
- spin_unlock_bh(&hsr->seqnr_lock);
-
hsr_forward_skb(skb, master);
+ spin_unlock_bh(&hsr->seqnr_lock);
}
/* Announce (supervision frame) timer function
diff --git a/net/hsr/hsr_forward.c b/net/hsr/hsr_forward.c
index c8bcbd990f59..35382ed686d1 100644
--- a/net/hsr/hsr_forward.c
+++ b/net/hsr/hsr_forward.c
@@ -467,10 +467,9 @@ static void handle_std_frame(struct sk_buff *skb,
frame->is_from_san = true;
} else {
/* Sequence nr for the master node */
- spin_lock_bh(&hsr->seqnr_lock);
+ lockdep_assert_held(&hsr->seqnr_lock);
frame->sequence_nr = hsr->sequence_nr;
hsr->sequence_nr++;
- spin_unlock_bh(&hsr->seqnr_lock);
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 278/731] hsr: Synchronize sequence number updates.
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (276 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 277/731] hsr: Synchronize sending frames to have always incremented outgoing seq nr Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 279/731] configfs: fix possible memory leak in configfs_create_dir() Greg Kroah-Hartman
` (463 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sebastian Andrzej Siewior,
Jakub Kicinski, Sasha Levin
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ Upstream commit 5c7aa13210c3abdd34fd421f62347665ec6eb551 ]
hsr_register_frame_out() compares new sequence_nr vs the old one
recorded in hsr_node::seq_out and if the new sequence_nr is higher then
it will be written to hsr_node::seq_out as the new value.
This operation isn't locked so it is possible that two frames with the
same sequence number arrive (via the two slave devices) and are fed to
hsr_register_frame_out() at the same time. Both will pass the check and
update the sequence counter later to the same value. As a result the
content of the same packet is fed into the stack twice.
This was noticed by running ping and observing DUP being reported from
time to time.
Instead of using the hsr_priv::seqnr_lock for the whole receive path (as
it is for sending in the master node) add an additional lock that is only
used for sequence number checks and updates.
Add a per-node lock that is used during sequence number reads and
updates.
Fixes: f421436a591d3 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/hsr/hsr_framereg.c | 9 ++++++++-
net/hsr/hsr_framereg.h | 2 ++
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/net/hsr/hsr_framereg.c b/net/hsr/hsr_framereg.c
index 440788e5b3e2..414bf4d3d3c9 100644
--- a/net/hsr/hsr_framereg.c
+++ b/net/hsr/hsr_framereg.c
@@ -159,6 +159,7 @@ static struct hsr_node *hsr_add_node(struct hsr_priv *hsr,
return NULL;
ether_addr_copy(new_node->macaddress_A, addr);
+ spin_lock_init(&new_node->seq_out_lock);
/* We are only interested in time diffs here, so use current jiffies
* as initialization. (0 could trigger an spurious ring error warning).
@@ -313,6 +314,7 @@ void hsr_handle_sup_frame(struct hsr_frame_info *frame)
goto done;
ether_addr_copy(node_real->macaddress_B, ethhdr->h_source);
+ spin_lock_bh(&node_real->seq_out_lock);
for (i = 0; i < HSR_PT_PORTS; i++) {
if (!node_curr->time_in_stale[i] &&
time_after(node_curr->time_in[i], node_real->time_in[i])) {
@@ -323,6 +325,7 @@ void hsr_handle_sup_frame(struct hsr_frame_info *frame)
if (seq_nr_after(node_curr->seq_out[i], node_real->seq_out[i]))
node_real->seq_out[i] = node_curr->seq_out[i];
}
+ spin_unlock_bh(&node_real->seq_out_lock);
node_real->addr_B_port = port_rcv->type;
spin_lock_bh(&hsr->list_lock);
@@ -419,13 +422,17 @@ void hsr_register_frame_in(struct hsr_node *node, struct hsr_port *port,
int hsr_register_frame_out(struct hsr_port *port, struct hsr_node *node,
u16 sequence_nr)
{
+ spin_lock_bh(&node->seq_out_lock);
if (seq_nr_before_or_eq(sequence_nr, node->seq_out[port->type]) &&
time_is_after_jiffies(node->time_out[port->type] +
- msecs_to_jiffies(HSR_ENTRY_FORGET_TIME)))
+ msecs_to_jiffies(HSR_ENTRY_FORGET_TIME))) {
+ spin_unlock_bh(&node->seq_out_lock);
return 1;
+ }
node->time_out[port->type] = jiffies;
node->seq_out[port->type] = sequence_nr;
+ spin_unlock_bh(&node->seq_out_lock);
return 0;
}
diff --git a/net/hsr/hsr_framereg.h b/net/hsr/hsr_framereg.h
index f9c83dc02ca5..48990166e4c4 100644
--- a/net/hsr/hsr_framereg.h
+++ b/net/hsr/hsr_framereg.h
@@ -69,6 +69,8 @@ void prp_update_san_info(struct hsr_node *node, bool is_sup);
struct hsr_node {
struct list_head mac_list;
+ /* Protect R/W access to seq_out */
+ spinlock_t seq_out_lock;
unsigned char macaddress_A[ETH_ALEN];
unsigned char macaddress_B[ETH_ALEN];
/* Local slave through which AddrB frames are received from this node */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 279/731] configfs: fix possible memory leak in configfs_create_dir()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (277 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 278/731] hsr: Synchronize sequence number updates Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 280/731] regulator: core: fix resource leak in regulator_register() Greg Kroah-Hartman
` (462 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen Zhongjin, Christoph Hellwig,
Sasha Levin
From: Chen Zhongjin <chenzhongjin@huawei.com>
[ Upstream commit c65234b283a65cfbfc94619655e820a5e55199eb ]
kmemleak reported memory leaks in configfs_create_dir():
unreferenced object 0xffff888009f6af00 (size 192):
comm "modprobe", pid 3777, jiffies 4295537735 (age 233.784s)
backtrace:
kmem_cache_alloc (mm/slub.c:3250 mm/slub.c:3256 mm/slub.c:3263 mm/slub.c:3273)
new_fragment (./include/linux/slab.h:600 fs/configfs/dir.c:163)
configfs_register_subsystem (fs/configfs/dir.c:1857)
basic_write (drivers/hwtracing/stm/p_basic.c:14) stm_p_basic
do_one_initcall (init/main.c:1296)
do_init_module (kernel/module/main.c:2455)
...
unreferenced object 0xffff888003ba7180 (size 96):
comm "modprobe", pid 3777, jiffies 4295537735 (age 233.784s)
backtrace:
kmem_cache_alloc (mm/slub.c:3250 mm/slub.c:3256 mm/slub.c:3263 mm/slub.c:3273)
configfs_new_dirent (./include/linux/slab.h:723 fs/configfs/dir.c:194)
configfs_make_dirent (fs/configfs/dir.c:248)
configfs_create_dir (fs/configfs/dir.c:296)
configfs_attach_group.isra.28 (fs/configfs/dir.c:816 fs/configfs/dir.c:852)
configfs_register_subsystem (fs/configfs/dir.c:1881)
basic_write (drivers/hwtracing/stm/p_basic.c:14) stm_p_basic
do_one_initcall (init/main.c:1296)
do_init_module (kernel/module/main.c:2455)
...
This is because the refcount is not correct in configfs_make_dirent().
For normal stage, the refcount is changing as:
configfs_register_subsystem()
configfs_create_dir()
configfs_make_dirent()
configfs_new_dirent() # set s_count = 1
dentry->d_fsdata = configfs_get(sd); # s_count = 2
...
configfs_unregister_subsystem()
configfs_remove_dir()
remove_dir()
configfs_remove_dirent() # s_count = 1
dput() ...
*dentry_unlink_inode()*
configfs_d_iput() # s_count = 0, release
However, if we failed in configfs_create():
configfs_register_subsystem()
configfs_create_dir()
configfs_make_dirent() # s_count = 2
...
configfs_create() # fail
->out_remove:
configfs_remove_dirent(dentry)
configfs_put(sd) # s_count = 1
return PTR_ERR(inode);
There is no inode in the error path, so the configfs_d_iput() is lost
and makes sd and fragment memory leaked.
To fix this, when we failed in configfs_create(), manually call
configfs_put(sd) to keep the refcount correct.
Fixes: 7063fbf22611 ("[PATCH] configfs: User-driven configuration filesystem")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/configfs/dir.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index d1f9d2632202..ec6519e1ca3b 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -316,6 +316,7 @@ static int configfs_create_dir(struct config_item *item, struct dentry *dentry,
return 0;
out_remove:
+ configfs_put(dentry->d_fsdata);
configfs_remove_dirent(dentry);
return PTR_ERR(inode);
}
@@ -382,6 +383,7 @@ int configfs_create_link(struct configfs_dirent *target, struct dentry *parent,
return 0;
out_remove:
+ configfs_put(dentry->d_fsdata);
configfs_remove_dirent(dentry);
return PTR_ERR(inode);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 280/731] regulator: core: fix resource leak in regulator_register()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (278 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 279/731] configfs: fix possible memory leak in configfs_create_dir() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 281/731] hwmon: (jc42) Convert register access and caching to regmap/regcache Greg Kroah-Hartman
` (461 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Mark Brown, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit ba62319a42c50e6254e98b3f316464fac8e77968 ]
I got some resource leak reports while doing fault injection test:
OF: ERROR: memory leak, expected refcount 1 instead of 100,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /i2c/pmic@64/regulators/buck1
unreferenced object 0xffff88810deea000 (size 512):
comm "490-i2c-rt5190a", pid 253, jiffies 4294859840 (age 5061.046s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff a0 1e 00 a1 ff ff ff ff ................
backtrace:
[<00000000d78541e2>] kmalloc_trace+0x21/0x110
[<00000000b343d153>] device_private_init+0x32/0xd0
[<00000000be1f0c70>] device_add+0xb2d/0x1030
[<00000000e3e6344d>] regulator_register+0xaf2/0x12a0
[<00000000e2f5e754>] devm_regulator_register+0x57/0xb0
[<000000008b898197>] rt5190a_probe+0x52a/0x861 [rt5190a_regulator]
unreferenced object 0xffff88810b617b80 (size 32):
comm "490-i2c-rt5190a", pid 253, jiffies 4294859904 (age 5060.983s)
hex dump (first 32 bytes):
72 65 67 75 6c 61 74 6f 72 2e 32 38 36 38 2d 53 regulator.2868-S
55 50 50 4c 59 00 ff ff 29 00 00 00 2b 00 00 00 UPPLY...)...+...
backtrace:
[<000000009da9280d>] __kmalloc_node_track_caller+0x44/0x1b0
[<0000000025c6a4e5>] kstrdup+0x3a/0x70
[<00000000790efb69>] create_regulator+0xc0/0x4e0
[<0000000005ed203a>] regulator_resolve_supply+0x2d4/0x440
[<0000000045796214>] regulator_register+0x10b3/0x12a0
[<00000000e2f5e754>] devm_regulator_register+0x57/0xb0
[<000000008b898197>] rt5190a_probe+0x52a/0x861 [rt5190a_regulator]
After calling regulator_resolve_supply(), the 'rdev->supply' is set
by set_supply(), after this set, in the error path, the resources
need be released, so call regulator_put() to avoid the leaks.
Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Fixes: 8a866d527ac0 ("regulator: core: Resolve supply name earlier to prevent double-init")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221202025111.496402-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index ab93debb817c..1a5aeb4868aa 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -5548,6 +5548,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
regulator_remove_coupling(rdev);
mutex_unlock(®ulator_list_mutex);
wash:
+ regulator_put(rdev->supply);
kfree(rdev->coupling_desc.coupled_rdevs);
mutex_lock(®ulator_list_mutex);
regulator_ena_gpio_free(rdev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 281/731] hwmon: (jc42) Convert register access and caching to regmap/regcache
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (279 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 280/731] regulator: core: fix resource leak in regulator_register() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 282/731] hwmon: (jc42) Restore the min/max/critical temperatures on resume Greg Kroah-Hartman
` (460 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Martin Blumenstingl, Guenter Roeck,
Sasha Levin
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit 8f2fa4726faf01094d7a5be7bd0c120c565f54d9 ]
Switch the jc42 driver to use an I2C regmap to access the registers.
Also move over to regmap's built-in caching instead of adding a
custom caching implementation. This works for JC42_REG_TEMP_UPPER,
JC42_REG_TEMP_LOWER and JC42_REG_TEMP_CRITICAL as these values never
change except when explicitly written. The cache For JC42_REG_TEMP is
dropped (regmap can't cache it because it's volatile, meaning it can
change at any time) as well for simplicity and consistency with other
drivers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221023213157.11078-2-martin.blumenstingl@googlemail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 084ed144c448 ("hwmon: (jc42) Restore the min/max/critical temperatures on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/Kconfig | 1 +
drivers/hwmon/jc42.c | 233 ++++++++++++++++++++++++------------------
2 files changed, 132 insertions(+), 102 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 51f1caa10d11..17ba1d9ff075 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -776,6 +776,7 @@ config SENSORS_IT87
config SENSORS_JC42
tristate "JEDEC JC42.4 compliant memory module temperature sensors"
depends on I2C
+ select REGMAP_I2C
help
If you say yes here, you get support for JEDEC JC42.4 compliant
temperature sensors, which are used on many DDR3 memory modules for
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 4a03d010ec5a..9a2a062eb7b8 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -19,6 +19,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/of.h>
+#include <linux/regmap.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = {
@@ -189,31 +190,14 @@ static struct jc42_chips jc42_chips[] = {
{ STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK },
};
-enum temp_index {
- t_input = 0,
- t_crit,
- t_min,
- t_max,
- t_num_temp
-};
-
-static const u8 temp_regs[t_num_temp] = {
- [t_input] = JC42_REG_TEMP,
- [t_crit] = JC42_REG_TEMP_CRITICAL,
- [t_min] = JC42_REG_TEMP_LOWER,
- [t_max] = JC42_REG_TEMP_UPPER,
-};
-
/* Each client has this additional data */
struct jc42_data {
- struct i2c_client *client;
struct mutex update_lock; /* protect register access */
+ struct regmap *regmap;
bool extended; /* true if extended range supported */
bool valid;
- unsigned long last_updated; /* In jiffies */
u16 orig_config; /* original configuration */
u16 config; /* current configuration */
- u16 temp[t_num_temp];/* Temperatures */
};
#define JC42_TEMP_MIN_EXTENDED (-40000)
@@ -238,85 +222,102 @@ static int jc42_temp_from_reg(s16 reg)
return reg * 125 / 2;
}
-static struct jc42_data *jc42_update_device(struct device *dev)
-{
- struct jc42_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
- struct jc42_data *ret = data;
- int i, val;
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
- for (i = 0; i < t_num_temp; i++) {
- val = i2c_smbus_read_word_swapped(client, temp_regs[i]);
- if (val < 0) {
- ret = ERR_PTR(val);
- goto abort;
- }
- data->temp[i] = val;
- }
- data->last_updated = jiffies;
- data->valid = true;
- }
-abort:
- mutex_unlock(&data->update_lock);
- return ret;
-}
-
static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
- struct jc42_data *data = jc42_update_device(dev);
- int temp, hyst;
+ struct jc42_data *data = dev_get_drvdata(dev);
+ unsigned int regval;
+ int ret, temp, hyst;
- if (IS_ERR(data))
- return PTR_ERR(data);
+ mutex_lock(&data->update_lock);
switch (attr) {
case hwmon_temp_input:
- *val = jc42_temp_from_reg(data->temp[t_input]);
- return 0;
+ ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val);
+ if (ret)
+ break;
+
+ *val = jc42_temp_from_reg(regval);
+ break;
case hwmon_temp_min:
- *val = jc42_temp_from_reg(data->temp[t_min]);
- return 0;
+ ret = regmap_read(data->regmap, JC42_REG_TEMP_LOWER, ®val);
+ if (ret)
+ break;
+
+ *val = jc42_temp_from_reg(regval);
+ break;
case hwmon_temp_max:
- *val = jc42_temp_from_reg(data->temp[t_max]);
- return 0;
+ ret = regmap_read(data->regmap, JC42_REG_TEMP_UPPER, ®val);
+ if (ret)
+ break;
+
+ *val = jc42_temp_from_reg(regval);
+ break;
case hwmon_temp_crit:
- *val = jc42_temp_from_reg(data->temp[t_crit]);
- return 0;
+ ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL,
+ ®val);
+ if (ret)
+ break;
+
+ *val = jc42_temp_from_reg(regval);
+ break;
case hwmon_temp_max_hyst:
- temp = jc42_temp_from_reg(data->temp[t_max]);
+ ret = regmap_read(data->regmap, JC42_REG_TEMP_UPPER, ®val);
+ if (ret)
+ break;
+
+ temp = jc42_temp_from_reg(regval);
hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
>> JC42_CFG_HYST_SHIFT];
*val = temp - hyst;
- return 0;
+ break;
case hwmon_temp_crit_hyst:
- temp = jc42_temp_from_reg(data->temp[t_crit]);
+ ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL,
+ ®val);
+ if (ret)
+ break;
+
+ temp = jc42_temp_from_reg(regval);
hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
>> JC42_CFG_HYST_SHIFT];
*val = temp - hyst;
- return 0;
+ break;
case hwmon_temp_min_alarm:
- *val = (data->temp[t_input] >> JC42_ALARM_MIN_BIT) & 1;
- return 0;
+ ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val);
+ if (ret)
+ break;
+
+ *val = (regval >> JC42_ALARM_MIN_BIT) & 1;
+ break;
case hwmon_temp_max_alarm:
- *val = (data->temp[t_input] >> JC42_ALARM_MAX_BIT) & 1;
- return 0;
+ ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val);
+ if (ret)
+ break;
+
+ *val = (regval >> JC42_ALARM_MAX_BIT) & 1;
+ break;
case hwmon_temp_crit_alarm:
- *val = (data->temp[t_input] >> JC42_ALARM_CRIT_BIT) & 1;
- return 0;
+ ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val);
+ if (ret)
+ break;
+
+ *val = (regval >> JC42_ALARM_CRIT_BIT) & 1;
+ break;
default:
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ break;
}
+
+ mutex_unlock(&data->update_lock);
+
+ return ret;
}
static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long val)
{
struct jc42_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
+ unsigned int regval;
int diff, hyst;
int ret;
@@ -324,21 +325,23 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
switch (attr) {
case hwmon_temp_min:
- data->temp[t_min] = jc42_temp_to_reg(val, data->extended);
- ret = i2c_smbus_write_word_swapped(client, temp_regs[t_min],
- data->temp[t_min]);
+ ret = regmap_write(data->regmap, JC42_REG_TEMP_LOWER,
+ jc42_temp_to_reg(val, data->extended));
break;
case hwmon_temp_max:
- data->temp[t_max] = jc42_temp_to_reg(val, data->extended);
- ret = i2c_smbus_write_word_swapped(client, temp_regs[t_max],
- data->temp[t_max]);
+ ret = regmap_write(data->regmap, JC42_REG_TEMP_UPPER,
+ jc42_temp_to_reg(val, data->extended));
break;
case hwmon_temp_crit:
- data->temp[t_crit] = jc42_temp_to_reg(val, data->extended);
- ret = i2c_smbus_write_word_swapped(client, temp_regs[t_crit],
- data->temp[t_crit]);
+ ret = regmap_write(data->regmap, JC42_REG_TEMP_CRITICAL,
+ jc42_temp_to_reg(val, data->extended));
break;
case hwmon_temp_crit_hyst:
+ ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL,
+ ®val);
+ if (ret)
+ return ret;
+
/*
* JC42.4 compliant chips only support four hysteresis values.
* Pick best choice and go from there.
@@ -346,7 +349,7 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
val = clamp_val(val, (data->extended ? JC42_TEMP_MIN_EXTENDED
: JC42_TEMP_MIN) - 6000,
JC42_TEMP_MAX);
- diff = jc42_temp_from_reg(data->temp[t_crit]) - val;
+ diff = jc42_temp_from_reg(regval) - val;
hyst = 0;
if (diff > 0) {
if (diff < 2250)
@@ -358,9 +361,8 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
}
data->config = (data->config & ~JC42_CFG_HYST_MASK) |
(hyst << JC42_CFG_HYST_SHIFT);
- ret = i2c_smbus_write_word_swapped(data->client,
- JC42_REG_CONFIG,
- data->config);
+ ret = regmap_write(data->regmap, JC42_REG_CONFIG,
+ data->config);
break;
default:
ret = -EOPNOTSUPP;
@@ -458,51 +460,80 @@ static const struct hwmon_chip_info jc42_chip_info = {
.info = jc42_info,
};
+static bool jc42_readable_reg(struct device *dev, unsigned int reg)
+{
+ return (reg >= JC42_REG_CAP && reg <= JC42_REG_DEVICEID) ||
+ reg == JC42_REG_SMBUS;
+}
+
+static bool jc42_writable_reg(struct device *dev, unsigned int reg)
+{
+ return (reg >= JC42_REG_CONFIG && reg <= JC42_REG_TEMP_CRITICAL) ||
+ reg == JC42_REG_SMBUS;
+}
+
+static bool jc42_volatile_reg(struct device *dev, unsigned int reg)
+{
+ return reg == JC42_REG_CONFIG || reg == JC42_REG_TEMP;
+}
+
+static const struct regmap_config jc42_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .val_format_endian = REGMAP_ENDIAN_BIG,
+ .max_register = JC42_REG_SMBUS,
+ .writeable_reg = jc42_writable_reg,
+ .readable_reg = jc42_readable_reg,
+ .volatile_reg = jc42_volatile_reg,
+ .cache_type = REGCACHE_RBTREE,
+};
+
static int jc42_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct device *hwmon_dev;
+ unsigned int config, cap;
struct jc42_data *data;
- int config, cap;
+ int ret;
data = devm_kzalloc(dev, sizeof(struct jc42_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- data->client = client;
+ data->regmap = devm_regmap_init_i2c(client, &jc42_regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
- if (cap < 0)
- return cap;
+ ret = regmap_read(data->regmap, JC42_REG_CAP, &cap);
+ if (ret)
+ return ret;
data->extended = !!(cap & JC42_CAP_RANGE);
if (device_property_read_bool(dev, "smbus-timeout-disable")) {
- int smbus;
-
/*
* Not all chips support this register, but from a
* quick read of various datasheets no chip appears
* incompatible with the below attempt to disable
* the timeout. And the whole thing is opt-in...
*/
- smbus = i2c_smbus_read_word_swapped(client, JC42_REG_SMBUS);
- if (smbus < 0)
- return smbus;
- i2c_smbus_write_word_swapped(client, JC42_REG_SMBUS,
- smbus | SMBUS_STMOUT);
+ ret = regmap_set_bits(data->regmap, JC42_REG_SMBUS,
+ SMBUS_STMOUT);
+ if (ret)
+ return ret;
}
- config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
- if (config < 0)
- return config;
+ ret = regmap_read(data->regmap, JC42_REG_CONFIG, &config);
+ if (ret)
+ return ret;
data->orig_config = config;
if (config & JC42_CFG_SHUTDOWN) {
config &= ~JC42_CFG_SHUTDOWN;
- i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
+ regmap_write(data->regmap, JC42_REG_CONFIG, config);
}
data->config = config;
@@ -523,7 +554,7 @@ static int jc42_remove(struct i2c_client *client)
config = (data->orig_config & ~JC42_CFG_HYST_MASK)
| (data->config & JC42_CFG_HYST_MASK);
- i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
+ regmap_write(data->regmap, JC42_REG_CONFIG, config);
}
return 0;
}
@@ -535,8 +566,7 @@ static int jc42_suspend(struct device *dev)
struct jc42_data *data = dev_get_drvdata(dev);
data->config |= JC42_CFG_SHUTDOWN;
- i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
- data->config);
+ regmap_write(data->regmap, JC42_REG_CONFIG, data->config);
return 0;
}
@@ -545,8 +575,7 @@ static int jc42_resume(struct device *dev)
struct jc42_data *data = dev_get_drvdata(dev);
data->config &= ~JC42_CFG_SHUTDOWN;
- i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
- data->config);
+ regmap_write(data->regmap, JC42_REG_CONFIG, data->config);
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 282/731] hwmon: (jc42) Restore the min/max/critical temperatures on resume
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (280 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 281/731] hwmon: (jc42) Convert register access and caching to regmap/regcache Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 283/731] bpf, sockmap: fix race in sock_map_free() Greg Kroah-Hartman
` (459 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Guenter Roeck, Martin Blumenstingl,
Sasha Levin
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit 084ed144c448fd5bc8ed5a58247153fbbfd115c3 ]
The JC42 compatible thermal sensor on Kingston KSM32ES8/16ME DIMMs
(using Micron E-Die) is an ST Microelectronics STTS2004 (manufacturer
0x104a, device 0x2201). It does not keep the previously programmed
minimum, maximum and critical temperatures after system suspend and
resume (which is a shutdown / startup cycle for the JC42 temperature
sensor). This results in an alarm on system resume because the hardware
default for these values is 0°C (so any environment temperature greater
than 0°C will trigger the alarm).
Example before system suspend:
jc42-i2c-0-1a
Adapter: SMBus PIIX4 adapter port 0 at 0b00
temp1: +34.8°C (low = +0.0°C)
(high = +85.0°C, hyst = +85.0°C)
(crit = +95.0°C, hyst = +95.0°C)
Example after system resume (without this change):
jc42-i2c-0-1a
Adapter: SMBus PIIX4 adapter port 0 at 0b00
temp1: +34.8°C (low = +0.0°C) ALARM (HIGH, CRIT)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C, hyst = +0.0°C)
Apply the cached values from the JC42_REG_TEMP_UPPER,
JC42_REG_TEMP_LOWER, JC42_REG_TEMP_CRITICAL and JC42_REG_SMBUS (where
the SMBUS register is not related to this issue but a side-effect of
using regcache_sync() during system resume with the previously
cached/programmed values. This fixes the alarm due to the hardware
defaults of 0°C because the previously applied limits (set by userspace)
are re-applied on system resume.
Fixes: 175c490c9e7f ("hwmon: (jc42) Add support for STTS2004 and AT30TSE004")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221023213157.11078-3-martin.blumenstingl@googlemail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/jc42.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 9a2a062eb7b8..5240bfdfcf2e 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -567,6 +567,10 @@ static int jc42_suspend(struct device *dev)
data->config |= JC42_CFG_SHUTDOWN;
regmap_write(data->regmap, JC42_REG_CONFIG, data->config);
+
+ regcache_cache_only(data->regmap, true);
+ regcache_mark_dirty(data->regmap);
+
return 0;
}
@@ -574,9 +578,13 @@ static int jc42_resume(struct device *dev)
{
struct jc42_data *data = dev_get_drvdata(dev);
+ regcache_cache_only(data->regmap, false);
+
data->config &= ~JC42_CFG_SHUTDOWN;
regmap_write(data->regmap, JC42_REG_CONFIG, data->config);
- return 0;
+
+ /* Restore cached register values to hardware */
+ return regcache_sync(data->regmap);
}
static const struct dev_pm_ops jc42_dev_pm_ops = {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 283/731] bpf, sockmap: fix race in sock_map_free()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (281 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 282/731] hwmon: (jc42) Restore the min/max/critical temperatures on resume Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 284/731] ALSA: pcm: Set missing stop_operating flag at undoing trigger start Greg Kroah-Hartman
` (458 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eric Dumazet, syzbot,
Jakub Sitnicki, John Fastabend, Alexei Starovoitov,
Daniel Borkmann, Song Liu, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 0a182f8d607464911756b4dbef5d6cad8de22469 ]
sock_map_free() calls release_sock(sk) without owning a reference
on the socket. This can cause use-after-free as syzbot found [1]
Jakub Sitnicki already took care of a similar issue
in sock_hash_free() in commit 75e68e5bf2c7 ("bpf, sockhash:
Synchronize delete from bucket list on map free")
[1]
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 3785 at lib/refcount.c:31 refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 3785 Comm: kworker/u4:6 Not tainted 6.1.0-rc7-syzkaller-00103-gef4d3ea40565 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: events_unbound bpf_map_free_deferred
RIP: 0010:refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31
Code: 68 8b 31 c0 e8 75 71 15 fd 0f 0b e9 64 ff ff ff e8 d9 6e 4e fd c6 05 62 9c 3d 0a 01 48 c7 c7 80 bb 68 8b 31 c0 e8 54 71 15 fd <0f> 0b e9 43 ff ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a2 fe ff
RSP: 0018:ffffc9000456fb60 EFLAGS: 00010246
RAX: eae59bab72dcd700 RBX: 0000000000000004 RCX: ffff8880207057c0
RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000
RBP: 0000000000000004 R08: ffffffff816fdabd R09: fffff520008adee5
R10: fffff520008adee5 R11: 1ffff920008adee4 R12: 0000000000000004
R13: dffffc0000000000 R14: ffff88807b1c6c00 R15: 1ffff1100f638dcf
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b30c30000 CR3: 000000000d08e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
__sock_put include/net/sock.h:779 [inline]
tcp_release_cb+0x2d0/0x360 net/ipv4/tcp_output.c:1092
release_sock+0xaf/0x1c0 net/core/sock.c:3468
sock_map_free+0x219/0x2c0 net/core/sock_map.c:356
process_one_work+0x81c/0xd10 kernel/workqueue.c:2289
worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
kthread+0x266/0x300 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20221202111640.2745533-1-edumazet@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/sock_map.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/core/sock_map.c b/net/core/sock_map.c
index 4f4bc163a223..ae6013a8bce5 100644
--- a/net/core/sock_map.c
+++ b/net/core/sock_map.c
@@ -349,11 +349,13 @@ static void sock_map_free(struct bpf_map *map)
sk = xchg(psk, NULL);
if (sk) {
+ sock_hold(sk);
lock_sock(sk);
rcu_read_lock();
sock_map_unref(sk, psk);
rcu_read_unlock();
release_sock(sk);
+ sock_put(sk);
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 284/731] ALSA: pcm: Set missing stop_operating flag at undoing trigger start
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (282 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 283/731] bpf, sockmap: fix race in sock_map_free() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 285/731] media: saa7164: fix missing pci_disable_device() Greg Kroah-Hartman
` (457 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Takashi Iwai, Sasha Levin
From: Takashi Iwai <tiwai@suse.de>
[ Upstream commit 5c8cc93b06d1ff860327a273abf3ac006290d242 ]
When a PCM trigger-start fails at snd_pcm_do_start(), PCM core tries
to undo the action at snd_pcm_undo_start() by issuing the trigger STOP
manually. At that point, we forgot to set the stop_operating flag,
hence the sync-stop won't be issued at the next prepare or other
calls.
This patch adds the missing stop_operating flag at
snd_pcm_undo_start().
Fixes: 1e850beea278 ("ALSA: pcm: Add the support for sync-stop operation")
Link: https://lore.kernel.org/r/b4e71631-4a94-613-27b2-fb595792630@carlh.net
Link: https://lore.kernel.org/r/20221205132124.11585-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/core/pcm_native.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index f38c2e5e9a29..44e06ef4ff0b 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1419,8 +1419,10 @@ static int snd_pcm_do_start(struct snd_pcm_substream *substream,
static void snd_pcm_undo_start(struct snd_pcm_substream *substream,
snd_pcm_state_t state)
{
- if (substream->runtime->trigger_master == substream)
+ if (substream->runtime->trigger_master == substream) {
substream->ops->trigger(substream, SNDRV_PCM_TRIGGER_STOP);
+ substream->runtime->stop_operating = true;
+ }
}
static void snd_pcm_post_start(struct snd_pcm_substream *substream,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 285/731] media: saa7164: fix missing pci_disable_device()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (283 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 284/731] ALSA: pcm: Set missing stop_operating flag at undoing trigger start Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 286/731] ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt Greg Kroah-Hartman
` (456 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Liu Shixin, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Liu Shixin <liushixin2@huawei.com>
[ Upstream commit 57fb35d7542384cac8f198cd1c927540ad38b61a ]
Add missing pci_disable_device() in the error path in saa7164_initdev().
Fixes: 443c1228d505 ("V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/pci/saa7164/saa7164-core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 7973ae42873a..c10997e2271d 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -1259,7 +1259,7 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
if (saa7164_dev_setup(dev) < 0) {
err = -EINVAL;
- goto fail_free;
+ goto fail_dev;
}
/* print pci info */
@@ -1427,6 +1427,8 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
fail_irq:
saa7164_dev_unregister(dev);
+fail_dev:
+ pci_disable_device(pci_dev);
fail_free:
v4l2_device_unregister(&dev->v4l2_dev);
kfree(dev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 286/731] ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (284 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 285/731] media: saa7164: fix missing pci_disable_device() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 287/731] xprtrdma: Fix regbuf data not freed in rpcrdma_req_create() Greg Kroah-Hartman
` (455 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Takashi Iwai, Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit cf2ea3c86ad90d63d1c572b43e1ca9276b0357ad ]
I got a null-ptr-defer error report when I do the following tests
on the qemu platform:
make defconfig and CONFIG_PARPORT=m, CONFIG_PARPORT_PC=m,
CONFIG_SND_MTS64=m
Then making test scripts:
cat>test_mod1.sh<<EOF
modprobe snd-mts64
modprobe snd-mts64
EOF
Executing the script, perhaps several times, we will get a null-ptr-defer
report, as follow:
syzkaller:~# ./test_mod.sh
snd_mts64: probe of snd_mts64.0 failed with error -5
modprobe: ERROR: could not insert 'snd_mts64': No such device
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 0 PID: 205 Comm: modprobe Not tainted 6.1.0-rc8-00588-g76dcd734eca2 #6
Call Trace:
<IRQ>
snd_mts64_interrupt+0x24/0xa0 [snd_mts64]
parport_irq_handler+0x37/0x50 [parport]
__handle_irq_event_percpu+0x39/0x190
handle_irq_event_percpu+0xa/0x30
handle_irq_event+0x2f/0x50
handle_edge_irq+0x99/0x1b0
__common_interrupt+0x5d/0x100
common_interrupt+0xa0/0xc0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:_raw_write_unlock_irqrestore+0x11/0x30
parport_claim+0xbd/0x230 [parport]
snd_mts64_probe+0x14a/0x465 [snd_mts64]
platform_probe+0x3f/0xa0
really_probe+0x129/0x2c0
__driver_probe_device+0x6d/0xc0
driver_probe_device+0x1a/0xa0
__device_attach_driver+0x7a/0xb0
bus_for_each_drv+0x62/0xb0
__device_attach+0xe4/0x180
bus_probe_device+0x82/0xa0
device_add+0x550/0x920
platform_device_add+0x106/0x220
snd_mts64_attach+0x2e/0x80 [snd_mts64]
port_check+0x14/0x20 [parport]
bus_for_each_dev+0x6e/0xc0
__parport_register_driver+0x7c/0xb0 [parport]
snd_mts64_module_init+0x31/0x1000 [snd_mts64]
do_one_initcall+0x3c/0x1f0
do_init_module+0x46/0x1c6
load_module+0x1d8d/0x1e10
__do_sys_finit_module+0xa2/0xf0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 1 seconds..
The mts wa not initialized during interrupt, we add check for
mts to fix this bug.
Fixes: 68ab801e32bb ("[ALSA] Add snd-mts64 driver for ESI Miditerminal 4140")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221206061004.1222966-1-cuigaosheng1@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/drivers/mts64.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/drivers/mts64.c b/sound/drivers/mts64.c
index d3bc9e8c407d..f0d34cf70c3e 100644
--- a/sound/drivers/mts64.c
+++ b/sound/drivers/mts64.c
@@ -815,6 +815,9 @@ static void snd_mts64_interrupt(void *private)
u8 status, data;
struct snd_rawmidi_substream *substream;
+ if (!mts)
+ return;
+
spin_lock(&mts->lock);
ret = mts64_read(mts->pardev->port);
data = ret & 0x00ff;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 287/731] xprtrdma: Fix regbuf data not freed in rpcrdma_req_create()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (285 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 286/731] ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 288/731] SUNRPC: Fix missing release socket in rpc_sockname() Greg Kroah-Hartman
` (454 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Xiaoxu, Trond Myklebust, Sasha Levin
From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[ Upstream commit 9181f40fb2952fd59ecb75e7158620c9c669eee3 ]
If rdma receive buffer allocate failed, should call rpcrdma_regbuf_free()
to free the send buffer, otherwise, the buffer data will be leaked.
Fixes: bb93a1ae2bf4 ("xprtrdma: Allocate req's regbufs at xprt create time")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/sunrpc/xprtrdma/verbs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 1295f9ab839f..507ba8b79992 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -858,7 +858,7 @@ struct rpcrdma_req *rpcrdma_req_create(struct rpcrdma_xprt *r_xprt, size_t size,
return req;
out3:
- kfree(req->rl_sendbuf);
+ rpcrdma_regbuf_free(req->rl_sendbuf);
out2:
kfree(req);
out1:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 288/731] SUNRPC: Fix missing release socket in rpc_sockname()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (286 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 287/731] xprtrdma: Fix regbuf data not freed in rpcrdma_req_create() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 289/731] NFSv4.x: Fail client initialisation if state manager thread cant run Greg Kroah-Hartman
` (453 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wang ShaoBo, Trond Myklebust, Sasha Levin
From: Wang ShaoBo <bobo.shaobowang@huawei.com>
[ Upstream commit 50fa355bc0d75911fe9d5072a5ba52cdb803aff7 ]
socket dynamically created is not released when getting an unintended
address family type in rpc_sockname(), direct to out_release for calling
sock_release().
Fixes: 2e738fdce22f ("SUNRPC: Add API to acquire source address")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/sunrpc/clnt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index ca2a494d727b..bbeb80e1133d 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1375,7 +1375,7 @@ static int rpc_sockname(struct net *net, struct sockaddr *sap, size_t salen,
break;
default:
err = -EAFNOSUPPORT;
- goto out;
+ goto out_release;
}
if (err < 0) {
dprintk("RPC: can't bind UDP socket (%d)\n", err);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 289/731] NFSv4.x: Fail client initialisation if state manager thread cant run
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (287 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 288/731] SUNRPC: Fix missing release socket in rpc_sockname() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 290/731] riscv, bpf: Emit fixed-length instructions for BPF_PSEUDO_FUNC Greg Kroah-Hartman
` (452 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, ChenXiaoSong, Trond Myklebust, Sasha Levin
From: Trond Myklebust <trond.myklebust@hammerspace.com>
[ Upstream commit b4e4f66901658fae0614dea5bf91062a5387eda7 ]
If the state manager thread fails to start, then we should just mark the
client initialisation as failed so that other processes or threads don't
get stuck in nfs_wait_client_init_complete().
Reported-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Fixes: 4697bd5e9419 ("NFSv4: Fix a race in the net namespace mount notification")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/nfs4state.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index ecac56be6cb7..0cd803b4d90c 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -1227,6 +1227,8 @@ void nfs4_schedule_state_manager(struct nfs_client *clp)
if (IS_ERR(task)) {
printk(KERN_ERR "%s: kthread_run: %ld\n",
__func__, PTR_ERR(task));
+ if (!nfs_client_init_is_complete(clp))
+ nfs_mark_client_ready(clp, PTR_ERR(task));
nfs4_clear_state_manager_bit(clp);
nfs_put_client(clp);
module_put(THIS_MODULE);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 290/731] riscv, bpf: Emit fixed-length instructions for BPF_PSEUDO_FUNC
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (288 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 289/731] NFSv4.x: Fail client initialisation if state manager thread cant run Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 291/731] mmc: alcor: fix return value check of mmc_add_host() Greg Kroah-Hartman
` (451 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Björn Töpel, Pu Lehui,
Daniel Borkmann, Björn Töpel, Sasha Levin
From: Pu Lehui <pulehui@huawei.com>
[ Upstream commit b54b6003612a376e7be32cbc5c1af3754bbbbb3d ]
For BPF_PSEUDO_FUNC instruction, verifier will refill imm with
correct addresses of bpf_calls and then run last pass of JIT.
Since the emit_imm of RV64 is variable-length, which will emit
appropriate length instructions accorroding to the imm, it may
broke ctx->offset, and lead to unpredictable problem, such as
inaccurate jump. So let's fix it with fixed-length instructions.
Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Suggested-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20221206091410.1584784-1-pulehui@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/riscv/net/bpf_jit_comp64.c | 29 ++++++++++++++++++++++++++++-
1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/net/bpf_jit_comp64.c b/arch/riscv/net/bpf_jit_comp64.c
index 3af4131c22c7..2e3f1a626a3a 100644
--- a/arch/riscv/net/bpf_jit_comp64.c
+++ b/arch/riscv/net/bpf_jit_comp64.c
@@ -120,6 +120,25 @@ static bool in_auipc_jalr_range(s64 val)
val < ((1L << 31) - (1L << 11));
}
+/* Emit fixed-length instructions for address */
+static int emit_addr(u8 rd, u64 addr, bool extra_pass, struct rv_jit_context *ctx)
+{
+ u64 ip = (u64)(ctx->insns + ctx->ninsns);
+ s64 off = addr - ip;
+ s64 upper = (off + (1 << 11)) >> 12;
+ s64 lower = off & 0xfff;
+
+ if (extra_pass && !in_auipc_jalr_range(off)) {
+ pr_err("bpf-jit: target offset 0x%llx is out of range\n", off);
+ return -ERANGE;
+ }
+
+ emit(rv_auipc(rd, upper), ctx);
+ emit(rv_addi(rd, rd, lower), ctx);
+ return 0;
+}
+
+/* Emit variable-length instructions for 32-bit and 64-bit imm */
static void emit_imm(u8 rd, s64 val, struct rv_jit_context *ctx)
{
/* Note that the immediate from the add is sign-extended,
@@ -887,7 +906,15 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
u64 imm64;
imm64 = (u64)insn1.imm << 32 | (u32)imm;
- emit_imm(rd, imm64, ctx);
+ if (bpf_pseudo_func(insn)) {
+ /* fixed-length insns for extra jit pass */
+ ret = emit_addr(rd, imm64, extra_pass, ctx);
+ if (ret)
+ return ret;
+ } else {
+ emit_imm(rd, imm64, ctx);
+ }
+
return 1;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 291/731] mmc: alcor: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (289 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 290/731] riscv, bpf: Emit fixed-length instructions for BPF_PSEUDO_FUNC Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 292/731] mmc: moxart: " Greg Kroah-Hartman
` (450 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit e93d1468f429475a753d6baa79b853b7ee5ef8c0 ]
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and calling mmc_free_host() in the
error path.
Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-2-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/alcor.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/alcor.c b/drivers/mmc/host/alcor.c
index bfb8efeb7eb8..d01df01d4b4d 100644
--- a/drivers/mmc/host/alcor.c
+++ b/drivers/mmc/host/alcor.c
@@ -1114,7 +1114,10 @@ static int alcor_pci_sdmmc_drv_probe(struct platform_device *pdev)
alcor_hw_init(host);
dev_set_drvdata(&pdev->dev, host);
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto free_host;
+
return 0;
free_host:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 292/731] mmc: moxart: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (290 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 291/731] mmc: alcor: fix return value check of mmc_add_host() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 293/731] mmc: mxcmmc: " Greg Kroah-Hartman
` (449 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 0ca18d09c744fb030ae9bc5836c3e357e0237dea ]
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and goto error path which will call
mmc_free_host().
Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-3-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/moxart-mmc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c
index dfc3ffd5b1f8..52ed30f2d9f4 100644
--- a/drivers/mmc/host/moxart-mmc.c
+++ b/drivers/mmc/host/moxart-mmc.c
@@ -665,7 +665,9 @@ static int moxart_probe(struct platform_device *pdev)
goto out;
dev_set_drvdata(dev, mmc);
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto out;
dev_dbg(dev, "IRQ=%d, FIFO is %d bytes\n", irq, host->fifo_width);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 293/731] mmc: mxcmmc: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (291 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 292/731] mmc: moxart: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 294/731] mmc: pxamci: " Greg Kroah-Hartman
` (448 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit cde600af7b413c9fe03e85c58c4279df90e91d13 ]
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and goto error path which will call
mmc_free_host().
Fixes: d96be879ff46 ("mmc: Add a MX2/MX3 specific SDHC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-4-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/mxcmmc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 9bf95ba217fa..97227ad71715 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -1143,7 +1143,9 @@ static int mxcmci_probe(struct platform_device *pdev)
timer_setup(&host->watchdog, mxcmci_watchdog, 0);
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto out_free_dma;
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 294/731] mmc: pxamci: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (292 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 293/731] mmc: mxcmmc: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 295/731] mmc: rtsx_pci: " Greg Kroah-Hartman
` (447 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 80e1ef3afb8bfbe768380b70ffe1b6cab87d1a3b ]
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, ->exit() need be called to uninit the pdata.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-5-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/pxamci.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 55868b6b8658..e25e9bb34eb3 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -763,7 +763,12 @@ static int pxamci_probe(struct platform_device *pdev)
dev_warn(dev, "gpio_ro and get_ro() both defined\n");
}
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ if (host->pdata && host->pdata->exit)
+ host->pdata->exit(dev, mmc);
+ goto out;
+ }
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 295/731] mmc: rtsx_pci: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (293 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 294/731] mmc: pxamci: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 296/731] mmc: rtsx_usb_sdmmc: " Greg Kroah-Hartman
` (446 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 0c87db77423a282b3b38b8a6daf057b822680516 ]
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and calling mmc_free_host() in the
error path, beside, runtime PM also needs be disabled.
Fixes: ff984e57d36e ("mmc: Add realtek pcie sdmmc host driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-6-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/rtsx_pci_sdmmc.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index e1580f78c6b2..8098726dcc0b 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -1474,6 +1474,7 @@ static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev)
struct realtek_pci_sdmmc *host;
struct rtsx_pcr *pcr;
struct pcr_handle *handle = pdev->dev.platform_data;
+ int ret;
if (!handle)
return -ENXIO;
@@ -1511,7 +1512,13 @@ static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev)
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_use_autosuspend(&pdev->dev);
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ mmc_free_host(mmc);
+ return ret;
+ }
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 296/731] mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (294 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 295/731] mmc: rtsx_pci: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 297/731] mmc: toshsd: " Greg Kroah-Hartman
` (445 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit fc38a5a10e9e5a75eb9189854abeb8405b214cc9 ]
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and calling mmc_free_host() in the
error path, besides, led_classdev_unregister() and pm_runtime_disable() also
need be called.
Fixes: c7f6558d84af ("mmc: Add realtek USB sdmmc host driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-7-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/rtsx_usb_sdmmc.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c
index 5fe4528e296e..1be3a355f10d 100644
--- a/drivers/mmc/host/rtsx_usb_sdmmc.c
+++ b/drivers/mmc/host/rtsx_usb_sdmmc.c
@@ -1332,6 +1332,7 @@ static int rtsx_usb_sdmmc_drv_probe(struct platform_device *pdev)
#ifdef RTSX_USB_USE_LEDS_CLASS
int err;
#endif
+ int ret;
ucr = usb_get_intfdata(to_usb_interface(pdev->dev.parent));
if (!ucr)
@@ -1368,7 +1369,15 @@ static int rtsx_usb_sdmmc_drv_probe(struct platform_device *pdev)
INIT_WORK(&host->led_work, rtsx_usb_update_led);
#endif
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret) {
+#ifdef RTSX_USB_USE_LEDS_CLASS
+ led_classdev_unregister(&host->led);
+#endif
+ mmc_free_host(mmc);
+ pm_runtime_disable(&pdev->dev);
+ return ret;
+ }
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 297/731] mmc: toshsd: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (295 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 296/731] mmc: rtsx_usb_sdmmc: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 298/731] mmc: vub300: " Greg Kroah-Hartman
` (444 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit f670744a316ea983113a65313dcd387b5a992444 ]
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, free_irq() also needs be called.
Fixes: a5eb8bbd66cc ("mmc: add Toshiba PCI SD controller driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-8-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/toshsd.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/toshsd.c b/drivers/mmc/host/toshsd.c
index 8d037c2071ab..497791ffada6 100644
--- a/drivers/mmc/host/toshsd.c
+++ b/drivers/mmc/host/toshsd.c
@@ -651,7 +651,9 @@ static int toshsd_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (ret)
goto unmap;
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto free_irq;
base = pci_resource_start(pdev, 0);
dev_dbg(&pdev->dev, "MMIO %pa, IRQ %d\n", &base, pdev->irq);
@@ -660,6 +662,8 @@ static int toshsd_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
+free_irq:
+ free_irq(pdev->irq, host);
unmap:
pci_iounmap(pdev, host->ioaddr);
release:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 298/731] mmc: vub300: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (296 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 297/731] mmc: toshsd: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 299/731] mmc: wmt-sdmmc: " Greg Kroah-Hartman
` (443 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 0613ad2401f88bdeae5594c30afe318e93b14676 ]
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, the timer added before mmc_add_host() needs be del.
And this patch fixes another missing call mmc_free_host() if usb_control_msg()
fails.
Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-9-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/vub300.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index 97beece62fec..ab36ec479747 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -2299,14 +2299,14 @@ static int vub300_probe(struct usb_interface *interface,
0x0000, 0x0000, &vub300->system_port_status,
sizeof(vub300->system_port_status), 1000);
if (retval < 0) {
- goto error4;
+ goto error5;
} else if (sizeof(vub300->system_port_status) == retval) {
vub300->card_present =
(0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
vub300->read_only =
(0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
} else {
- goto error4;
+ goto error5;
}
usb_set_intfdata(interface, vub300);
INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
@@ -2329,8 +2329,13 @@ static int vub300_probe(struct usb_interface *interface,
"USB vub300 remote SDIO host controller[%d]"
"connected with no SD/SDIO card inserted\n",
interface_to_InterfaceNumber(interface));
- mmc_add_host(mmc);
+ retval = mmc_add_host(mmc);
+ if (retval)
+ goto error6;
+
return 0;
+error6:
+ del_timer_sync(&vub300->inactivity_timer);
error5:
mmc_free_host(mmc);
/*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 299/731] mmc: wmt-sdmmc: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (297 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 298/731] mmc: vub300: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 300/731] mmc: atmel-mci: " Greg Kroah-Hartman
` (442 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 29276d56f6ed138db0f38cd31aedc0b725c8c76c ]
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, clk_disable_unprepare() also needs be called.
Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-10-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/wmt-sdmmc.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c
index 8df722ec57ed..393319548857 100644
--- a/drivers/mmc/host/wmt-sdmmc.c
+++ b/drivers/mmc/host/wmt-sdmmc.c
@@ -859,11 +859,15 @@ static int wmt_mci_probe(struct platform_device *pdev)
/* configure the controller to a known 'ready' state */
wmt_reset_hardware(mmc);
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto fail7;
dev_info(&pdev->dev, "WMT SDHC Controller initialized\n");
return 0;
+fail7:
+ clk_disable_unprepare(priv->clk_sdmmc);
fail6:
clk_put(priv->clk_sdmmc);
fail5_and_a_half:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 300/731] mmc: atmel-mci: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (298 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 299/731] mmc: wmt-sdmmc: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 301/731] mmc: omap_hsmmc: " Greg Kroah-Hartman
` (441 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 9e6e8c43726673ca2abcaac87640b9215fd72f4c ]
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
So fix this by checking the return value and calling mmc_free_host()
in the error path.
Fixes: 7d2be0749a59 ("atmel-mci: Driver for Atmel on-chip MMC controllers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221108122819.429975-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/atmel-mci.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 807177c953f3..6f971a3e7e49 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -2223,6 +2223,7 @@ static int atmci_init_slot(struct atmel_mci *host,
{
struct mmc_host *mmc;
struct atmel_mci_slot *slot;
+ int ret;
mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev);
if (!mmc)
@@ -2306,11 +2307,13 @@ static int atmci_init_slot(struct atmel_mci *host,
host->slot[id] = slot;
mmc_regulator_get_supply(mmc);
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ mmc_free_host(mmc);
+ return ret;
+ }
if (gpio_is_valid(slot->detect_pin)) {
- int ret;
-
timer_setup(&slot->detect_timer, atmci_detect_change, 0);
ret = request_irq(gpio_to_irq(slot->detect_pin),
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 301/731] mmc: omap_hsmmc: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (299 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 300/731] mmc: atmel-mci: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 302/731] mmc: meson-gx: " Greg Kroah-Hartman
` (440 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit a525cad241c339ca00bf7ebf03c5180f2a9b767c ]
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
Fix this by checking the return value and goto error path wihch
will call mmc_free_host().
Fixes: a45c6cb81647 ("[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221108121316.340354-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/omap_hsmmc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 2f8038d69f67..eb0bd46b7e81 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1987,7 +1987,9 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
if (!ret)
mmc->caps |= MMC_CAP_SDIO_IRQ;
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto err_irq;
if (mmc_pdata(host)->name != NULL) {
ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 302/731] mmc: meson-gx: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (300 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 301/731] mmc: omap_hsmmc: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 303/731] mmc: via-sdmmc: " Greg Kroah-Hartman
` (439 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Neil Armstrong,
Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 90935f16f2650ab7416fa2ffbe5c28cb39cf3f1e ]
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
Fix this by checking the return value and goto error path which
will call mmc_free_host().
Fixes: 51c5d8447bd7 ("MMC: meson: initial support for GX platforms")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20221108123417.479045-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/meson-gx-mmc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 9b2e2548bd18..753f9ea254d4 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -1291,7 +1291,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
}
mmc->ops = &meson_mmc_ops;
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto err_free_irq;
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 303/731] mmc: via-sdmmc: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (301 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 302/731] mmc: meson-gx: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 304/731] mmc: wbsd: " Greg Kroah-Hartman
` (438 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit e4e46fb61e3bb4628170810d3f2b996b709b90d9 ]
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
Fix this by checking the return value and goto error path which
will call mmc_free_host().
Fixes: f0bf7f61b840 ("mmc: Add new via-sdmmc host controller driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221108130949.1067699-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/via-sdmmc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index 88662a90ed96..a2b0d9461665 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -1151,7 +1151,9 @@ static int via_sd_probe(struct pci_dev *pcidev,
pcidev->subsystem_device == 0x3891)
sdhost->quirks = VIA_CRDR_QUIRK_300MS_PWRDELAY;
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto unmap;
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 304/731] mmc: wbsd: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (302 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 303/731] mmc: via-sdmmc: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 305/731] mmc: mmci: " Greg Kroah-Hartman
` (437 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit dc5b9b50fc9d1334407e316e6e29a5097ef833bd ]
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
So fix this by checking the return value and goto error path which
will call mmc_free_host(), besides, other resources also need be
released.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109133237.3273558-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/wbsd.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 67ecd342fe5f..7c7ec8d10232 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -1698,7 +1698,17 @@ static int wbsd_init(struct device *dev, int base, int irq, int dma,
*/
wbsd_init_device(host);
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ if (!pnp)
+ wbsd_chip_poweroff(host);
+
+ wbsd_release_resources(host);
+ wbsd_free_mmc(dev);
+
+ mmc_free_host(mmc);
+ return ret;
+ }
pr_info("%s: W83L51xD", mmc_hostname(mmc));
if (host->chip_id != 0)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 305/731] mmc: mmci: fix return value check of mmc_add_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (303 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 304/731] mmc: wbsd: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 306/731] mmc: renesas_sdhi: alway populate SCC pointer Greg Kroah-Hartman
` (436 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ulf Hansson, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit b38a20f29a49ae04d23750d104b25400b792b98c ]
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
So fix this by checking the return value and goto error path which
will call mmc_free_host().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109133539.3275664-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/mmci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 3765e2f4ad98..2c4eda83ca18 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -2254,7 +2254,9 @@ static int mmci_probe(struct amba_device *dev,
pm_runtime_set_autosuspend_delay(&dev->dev, 50);
pm_runtime_use_autosuspend(&dev->dev);
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto clk_disable;
pm_runtime_put(&dev->dev);
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 306/731] mmc: renesas_sdhi: alway populate SCC pointer
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (304 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 305/731] mmc: mmci: " Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 307/731] memstick: ms_block: Add error handling support for add_disk() Greg Kroah-Hartman
` (435 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Takeshi Saito, Takeshi Kihara,
Wolfram Sang, Yoshihiro Shimoda, Ulf Hansson, Sasha Levin
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
[ Upstream commit 3d4f9898c1c74323dd61d6a8a0efca9401232ad4 ]
We need the SCC pointer to reset the device, so populate it even when we
don't need it for tuning.
Fixes: 45bffc371fef ("mmc: renesas_sdhi: only reset SCC when its pointer is populated")
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/renesas_sdhi_core.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 387f2a4f693a..f443debbcb98 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -1037,11 +1037,14 @@ int renesas_sdhi_probe(struct platform_device *pdev,
if (ver >= SDHI_VER_GEN3_SD)
host->get_timeout_cycles = renesas_sdhi_gen3_get_cycles;
+ /* Check for SCC so we can reset it if needed */
+ if (of_data && of_data->scc_offset && ver >= SDHI_VER_GEN2_SDR104)
+ priv->scc_ctl = host->ctl + of_data->scc_offset;
+
/* Enable tuning iff we have an SCC and a supported mode */
- if (of_data && of_data->scc_offset &&
- (host->mmc->caps & MMC_CAP_UHS_SDR104 ||
- host->mmc->caps2 & (MMC_CAP2_HS200_1_8V_SDR |
- MMC_CAP2_HS400_1_8V))) {
+ if (priv->scc_ctl && (host->mmc->caps & MMC_CAP_UHS_SDR104 ||
+ host->mmc->caps2 & (MMC_CAP2_HS200_1_8V_SDR |
+ MMC_CAP2_HS400_1_8V))) {
const struct renesas_sdhi_scc *taps = of_data->taps;
bool use_4tap = priv->quirks && priv->quirks->hs400_4taps;
bool hit = false;
@@ -1061,7 +1064,6 @@ int renesas_sdhi_probe(struct platform_device *pdev,
if (!hit)
dev_warn(&host->pdev->dev, "Unknown clock rate for tuning\n");
- priv->scc_ctl = host->ctl + of_data->scc_offset;
host->check_retune = renesas_sdhi_check_scc_error;
host->ops.execute_tuning = renesas_sdhi_execute_tuning;
host->ops.prepare_hs400_tuning = renesas_sdhi_prepare_hs400_tuning;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 307/731] memstick: ms_block: Add error handling support for add_disk()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (305 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 306/731] mmc: renesas_sdhi: alway populate SCC pointer Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 308/731] memstick/ms_block: Add check for alloc_ordered_workqueue Greg Kroah-Hartman
` (434 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Luis Chamberlain, Ulf Hansson, Sasha Levin
From: Luis Chamberlain <mcgrof@kernel.org>
[ Upstream commit 2304c55fd506fcd5e1a59ae21a306ee82507340b ]
We never checked for errors on add_disk() as this function returned void.
Now that this is fixed, use the shiny new error handling.
Contrary to the typical removal which delays the put_disk() until later,
since we are failing on a probe we immediately put the disk on failure from
add_disk by using blk_cleanup_disk().
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210902174105.2418771-3-mcgrof@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 4f431a047a5c ("memstick/ms_block: Add check for alloc_ordered_workqueue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/memstick/core/ms_block.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/memstick/core/ms_block.c b/drivers/memstick/core/ms_block.c
index f854822f84d6..29a69243cbd0 100644
--- a/drivers/memstick/core/ms_block.c
+++ b/drivers/memstick/core/ms_block.c
@@ -2157,10 +2157,14 @@ static int msb_init_disk(struct memstick_dev *card)
set_disk_ro(msb->disk, 1);
msb_start(card);
- device_add_disk(&card->dev, msb->disk, NULL);
+ rc = device_add_disk(&card->dev, msb->disk, NULL);
+ if (rc)
+ goto out_cleanup_disk;
dbg("Disk added");
return 0;
+out_cleanup_disk:
+ blk_cleanup_disk(msb->disk);
out_free_tag_set:
blk_mq_free_tag_set(&msb->tag_set);
out_release_id:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 308/731] memstick/ms_block: Add check for alloc_ordered_workqueue
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (306 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 307/731] memstick: ms_block: Add error handling support for add_disk() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 309/731] mmc: core: Normalize the error handling branch in sd_read_ext_regs() Greg Kroah-Hartman
` (433 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Ulf Hansson, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit 4f431a047a5c8698ed4b67e2760cfbeb5fffb69d ]
As the alloc_ordered_workqueue may return NULL pointer, it should be better
to add check for the return value. Moreover, the msb->io_queue should be
freed if error occurs later.
Fixes: 0ab30494bc4f ("memstick: add support for legacy memorysticks")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221126012558.34374-1-jiasheng@iscas.ac.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/memstick/core/ms_block.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/memstick/core/ms_block.c b/drivers/memstick/core/ms_block.c
index 29a69243cbd0..7619c30b4ee1 100644
--- a/drivers/memstick/core/ms_block.c
+++ b/drivers/memstick/core/ms_block.c
@@ -2150,6 +2150,11 @@ static int msb_init_disk(struct memstick_dev *card)
msb->usage_count = 1;
msb->io_queue = alloc_ordered_workqueue("ms_block", WQ_MEM_RECLAIM);
+ if (!msb->io_queue) {
+ rc = -ENOMEM;
+ goto out_cleanup_disk;
+ }
+
INIT_WORK(&msb->io_work, msb_io_work);
sg_init_table(msb->prealloc_sg, MS_BLOCK_MAX_SEGS+1);
@@ -2159,10 +2164,12 @@ static int msb_init_disk(struct memstick_dev *card)
msb_start(card);
rc = device_add_disk(&card->dev, msb->disk, NULL);
if (rc)
- goto out_cleanup_disk;
+ goto out_destroy_workqueue;
dbg("Disk added");
return 0;
+out_destroy_workqueue:
+ destroy_workqueue(msb->io_queue);
out_cleanup_disk:
blk_cleanup_disk(msb->disk);
out_free_tag_set:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 309/731] mmc: core: Normalize the error handling branch in sd_read_ext_regs()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (307 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 308/731] memstick/ms_block: Add check for alloc_ordered_workqueue Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 310/731] regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe() Greg Kroah-Hartman
` (432 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zhen Lei, Ulf Hansson, Sasha Levin
From: Zhen Lei <thunder.leizhen@huawei.com>
[ Upstream commit fc02e2b52389c8fde02852b2f959c0b45f042bbd ]
Let's use pr_err() to output the error messages and let's extend a comment
to clarify why returning 0 (success) in one case make sense.
Fixes: c784f92769ae ("mmc: core: Read the SD function extension registers for power management")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[Ulf: Clarified the comment and the commit-msg]
Link: https://lore.kernel.org/r/20221130134920.2109-1-thunder.leizhen@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/core/sd.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 86a8a1f56583..592166e53dce 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -1252,7 +1252,7 @@ static int sd_read_ext_regs(struct mmc_card *card)
*/
err = sd_read_ext_reg(card, 0, 0, 0, 512, gen_info_buf);
if (err) {
- pr_warn("%s: error %d reading general info of SD ext reg\n",
+ pr_err("%s: error %d reading general info of SD ext reg\n",
mmc_hostname(card->host), err);
goto out;
}
@@ -1266,7 +1266,12 @@ static int sd_read_ext_regs(struct mmc_card *card)
/* Number of extensions to be find. */
num_ext = gen_info_buf[4];
- /* We support revision 0, but limit it to 512 bytes for simplicity. */
+ /*
+ * We only support revision 0 and limit it to 512 bytes for simplicity.
+ * No matter what, let's return zero to allow us to continue using the
+ * card, even if we can't support the features from the SD function
+ * extensions registers.
+ */
if (rev != 0 || len > 512) {
pr_warn("%s: non-supported SD ext reg layout\n",
mmc_hostname(card->host));
@@ -1281,7 +1286,7 @@ static int sd_read_ext_regs(struct mmc_card *card)
for (i = 0; i < num_ext; i++) {
err = sd_parse_ext_reg(card, gen_info_buf, &next_ext_addr);
if (err) {
- pr_warn("%s: error %d parsing SD ext reg\n",
+ pr_err("%s: error %d parsing SD ext reg\n",
mmc_hostname(card->host), err);
goto out;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 310/731] regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (308 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 309/731] mmc: core: Normalize the error handling branch in sd_read_ext_regs() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 311/731] media: c8sectpfe: Add of_node_put() when breaking out of loop Greg Kroah-Hartman
` (431 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yuan Can, Mark Brown, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit cf34ac6aa2b12fb0c3aacfdcae8acd7904b949ec ]
The reg_node needs to be released through of_node_put() in the error
handling path when of_irq_get_byname() failed.
Fixes: 390af53e0411 ("regulator: qcom-labibb: Implement short-circuit and over-current IRQs")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221203062109.115043-1-yuancan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/qcom-labibb-regulator.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c
index 639b71eb41ff..bcf7140f3bc9 100644
--- a/drivers/regulator/qcom-labibb-regulator.c
+++ b/drivers/regulator/qcom-labibb-regulator.c
@@ -822,6 +822,7 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev)
if (irq == 0)
irq = -EINVAL;
+ of_node_put(reg_node);
return dev_err_probe(vreg->dev, irq,
"Short-circuit irq not found.\n");
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 311/731] media: c8sectpfe: Add of_node_put() when breaking out of loop
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (309 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 310/731] regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe() Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 312/731] media: coda: Add check for dcoda_iram_alloc Greg Kroah-Hartman
` (430 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Liang He, Hans Verkuil, Sasha Levin
From: Liang He <windhl@126.com>
[ Upstream commit 63ff05a1ad242a5a0f897921c87b70d601bda59c ]
In configure_channels(), we should call of_node_put() when breaking
out of for_each_child_of_node() which will automatically increase
and decrease the refcount.
Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
index 338b205ae3a7..88d0188397e7 100644
--- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
@@ -940,6 +940,7 @@ static int configure_channels(struct c8sectpfei *fei)
if (ret) {
dev_err(fei->dev,
"configure_memdma_and_inputblock failed\n");
+ of_node_put(child);
goto err_unmap;
}
index++;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 312/731] media: coda: Add check for dcoda_iram_alloc
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (310 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 311/731] media: c8sectpfe: Add of_node_put() when breaking out of loop Greg Kroah-Hartman
@ 2022-12-28 14:36 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 313/731] media: coda: Add check for kmalloc Greg Kroah-Hartman
` (429 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:36 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Hans Verkuil, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit 6b8082238fb8bb20f67e46388123e67a5bbc558d ]
As the coda_iram_alloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.
Fixes: b313bcc9a467 ("[media] coda: simplify IRAM setup")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/coda/coda-bit.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/coda/coda-bit.c b/drivers/media/platform/coda/coda-bit.c
index c484c008ab02..284608845b85 100644
--- a/drivers/media/platform/coda/coda-bit.c
+++ b/drivers/media/platform/coda/coda-bit.c
@@ -852,7 +852,7 @@ static void coda_setup_iram(struct coda_ctx *ctx)
/* Only H.264BP and H.263P3 are considered */
iram_info->buf_dbk_y_use = coda_iram_alloc(iram_info, w64);
iram_info->buf_dbk_c_use = coda_iram_alloc(iram_info, w64);
- if (!iram_info->buf_dbk_c_use)
+ if (!iram_info->buf_dbk_y_use || !iram_info->buf_dbk_c_use)
goto out;
iram_info->axi_sram_use |= dbk_bits;
@@ -876,7 +876,7 @@ static void coda_setup_iram(struct coda_ctx *ctx)
iram_info->buf_dbk_y_use = coda_iram_alloc(iram_info, w128);
iram_info->buf_dbk_c_use = coda_iram_alloc(iram_info, w128);
- if (!iram_info->buf_dbk_c_use)
+ if (!iram_info->buf_dbk_y_use || !iram_info->buf_dbk_c_use)
goto out;
iram_info->axi_sram_use |= dbk_bits;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 313/731] media: coda: Add check for kmalloc
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (311 preceding siblings ...)
2022-12-28 14:36 ` [PATCH 5.15 312/731] media: coda: Add check for dcoda_iram_alloc Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 314/731] clk: samsung: Fix memory leak in _samsung_clk_register_pll() Greg Kroah-Hartman
` (428 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Hans Verkuil, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit 6e5e5defdb8b0186312c2f855ace175aee6daf9b ]
As the kmalloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.
Fixes: cb1d3a336371 ("[media] coda: add CODA7541 JPEG support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/coda/coda-bit.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/coda/coda-bit.c b/drivers/media/platform/coda/coda-bit.c
index 284608845b85..582a6c581f3c 100644
--- a/drivers/media/platform/coda/coda-bit.c
+++ b/drivers/media/platform/coda/coda-bit.c
@@ -1082,10 +1082,16 @@ static int coda_start_encoding(struct coda_ctx *ctx)
}
if (dst_fourcc == V4L2_PIX_FMT_JPEG) {
- if (!ctx->params.jpeg_qmat_tab[0])
+ if (!ctx->params.jpeg_qmat_tab[0]) {
ctx->params.jpeg_qmat_tab[0] = kmalloc(64, GFP_KERNEL);
- if (!ctx->params.jpeg_qmat_tab[1])
+ if (!ctx->params.jpeg_qmat_tab[0])
+ return -ENOMEM;
+ }
+ if (!ctx->params.jpeg_qmat_tab[1]) {
ctx->params.jpeg_qmat_tab[1] = kmalloc(64, GFP_KERNEL);
+ if (!ctx->params.jpeg_qmat_tab[1])
+ return -ENOMEM;
+ }
coda_set_jpeg_compression_quality(ctx, ctx->params.jpeg_quality);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 314/731] clk: samsung: Fix memory leak in _samsung_clk_register_pll()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (312 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 313/731] media: coda: Add check for kmalloc Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 315/731] spi: spi-gpio: Dont set MOSI as an input if not 3WIRE mode Greg Kroah-Hartman
` (427 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiu Jianfeng, Alim Akhtar,
Stephen Boyd, Sasha Levin
From: Xiu Jianfeng <xiujianfeng@huawei.com>
[ Upstream commit 5174e5b0d1b669a489524192b6adcbb3c54ebc72 ]
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.
Fixes: 3ff6e0d8d64d ("clk: samsung: Add support to register rate_table for samsung plls")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123032015.63980-1-xiujianfeng@huawei.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/samsung/clk-pll.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index 5873a9354b50..4909e940f0ab 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -1385,6 +1385,7 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
if (ret) {
pr_err("%s: failed to register pll clock %s : %d\n",
__func__, pll_clk->name, ret);
+ kfree(pll->rate_table);
kfree(pll);
return;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 315/731] spi: spi-gpio: Dont set MOSI as an input if not 3WIRE mode
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (313 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 314/731] clk: samsung: Fix memory leak in _samsung_clk_register_pll() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 316/731] wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h Greg Kroah-Hartman
` (426 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Kris Bahnsen, Mark Brown, Sasha Levin
From: Kris Bahnsen <kris@embeddedTS.com>
[ Upstream commit 3a6f994f848a69deb2bf3cd9d130dd0c09730e55 ]
The addition of 3WIRE support would affect MOSI direction even
when still in standard (4 wire) mode. This can lead to MOSI being
at an invalid logic level when a device driver sets an SPI
message with a NULL tx_buf.
spi.h states that if tx_buf is NULL then "zeros will be shifted
out ... " If MOSI is tristated then the data shifted out is subject
to pull resistors, keepers, or in the absence of those, noise.
This issue came to light when using spi-gpio connected to an
ADS7843 touchscreen controller. MOSI pulled high when clocking
MISO data in caused the SPI device to interpret this as a command
which would put the device in an unexpected and non-functional
state.
Fixes: 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support")
Fixes: 5132b3d28371 ("spi: gpio: Support 3WIRE high-impedance turn-around")
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Link: https://lore.kernel.org/r/20221207230853.6174-1-kris@embeddedTS.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-gpio.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 0584f4d2fde2..3ffdab6caac2 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -244,9 +244,19 @@ static int spi_gpio_set_direction(struct spi_device *spi, bool output)
if (output)
return gpiod_direction_output(spi_gpio->mosi, 1);
- ret = gpiod_direction_input(spi_gpio->mosi);
- if (ret)
- return ret;
+ /*
+ * Only change MOSI to an input if using 3WIRE mode.
+ * Otherwise, MOSI could be left floating if there is
+ * no pull resistor connected to the I/O pin, or could
+ * be left logic high if there is a pull-up. Transmitting
+ * logic high when only clocking MISO data in can put some
+ * SPI devices in to a bad state.
+ */
+ if (spi->mode & SPI_3WIRE) {
+ ret = gpiod_direction_input(spi_gpio->mosi);
+ if (ret)
+ return ret;
+ }
/*
* Send a turnaround high impedance cycle when switching
* from output to input. Theoretically there should be
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 316/731] wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (314 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 315/731] spi: spi-gpio: Dont set MOSI as an input if not 3WIRE mode Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 317/731] wifi: rtl8xxxu: Fix the channel width reporting Greg Kroah-Hartman
` (425 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bitterblue Smith, Ping-Ke Shih,
Kalle Valo, Sasha Levin
From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
[ Upstream commit dd469a754afdb782ba3033cee102147493dc39f4 ]
This struct is used to access a sequence of bytes received from the
wifi chip. It must not have any padding bytes between the members.
This doesn't change anything on my system, possibly because currently
none of the members need more than byte alignment.
Fixes: b2b43b7837ba ("rtl8xxxu: Initial functionality to handle C2H events for 8723bu")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1a270918-da22-ff5f-29fc-7855f740c5ba@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index 7ddce3c3f0c4..cd3ff9847ced 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1190,7 +1190,7 @@ struct rtl8723bu_c2h {
u8 bw;
} __packed ra_report;
};
-};
+} __packed;
struct rtl8xxxu_fileops;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 317/731] wifi: rtl8xxxu: Fix the channel width reporting
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (315 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 316/731] wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 318/731] wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware() Greg Kroah-Hartman
` (424 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bitterblue Smith, Ping-Ke Shih,
Kalle Valo, Sasha Levin
From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
[ Upstream commit 76c16af2cb10282274596e21add2c9f0b95c941b ]
The gen 2 chips RTL8192EU and RTL8188FU periodically send the driver
reports about the TX rate, and the driver passes these reports to
sta_statistics. The reports from RTL8192EU may or may not include the
channel width. The reports from RTL8188FU do not include it.
Only access the c2h->ra_report.bw field if the report (skb) is big
enough.
The other problem fixed here is that the code was actually never
changing the channel width initially reported by
rtl8xxxu_bss_info_changed because the value of RATE_INFO_BW_20 is 0.
Fixes: 0985d3a410ac ("rtl8xxxu: Feed current txrate information for mac80211")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/5b41f1ae-72e7-6b7a-2459-b736399a1c40@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 2a4ecbb0fce6..7370d92a3bda 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5517,7 +5517,6 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
rarpt->txrate.flags = 0;
rate = c2h->ra_report.rate;
sgi = c2h->ra_report.sgi;
- bw = c2h->ra_report.bw;
if (rate < DESC_RATE_MCS0) {
rarpt->txrate.legacy =
@@ -5534,8 +5533,13 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
RATE_INFO_FLAGS_SHORT_GI;
}
- if (bw == RATE_INFO_BW_20)
- rarpt->txrate.bw |= RATE_INFO_BW_20;
+ if (skb->len >= offsetofend(typeof(*c2h), ra_report.bw)) {
+ if (c2h->ra_report.bw == RTL8XXXU_CHANNEL_WIDTH_40)
+ bw = RATE_INFO_BW_40;
+ else
+ bw = RATE_INFO_BW_20;
+ rarpt->txrate.bw = bw;
+ }
}
bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
rarpt->bit_rate = bit_rate;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 318/731] wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (316 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 317/731] wifi: rtl8xxxu: Fix the channel width reporting Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 319/731] blktrace: Fix output non-blktrace event when blk_classic option enabled Greg Kroah-Hartman
` (423 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wang Yufen, Arend van Spriel,
Kalle Valo, Sasha Levin
From: Wang Yufen <wangyufen@huawei.com>
[ Upstream commit c2f2924bc7f9ea75ef8d95863e710168f8196256 ]
Fix to return a negative error code instead of 0 when
brcmf_chip_set_active() fails. In addition, change the return
value for brcmf_pcie_exit_download_state() to keep consistent.
Fixes: d380ebc9b6fb ("brcmfmac: rename chip download functions")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1669959342-27144-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 2 +-
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 3ff4997e1c97..358021a33b8a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -626,7 +626,7 @@ static int brcmf_pcie_exit_download_state(struct brcmf_pciedev_info *devinfo,
}
if (!brcmf_chip_set_active(devinfo->ci, resetintr))
- return -EINVAL;
+ return -EIO;
return 0;
}
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index f7961b22e051..5006aa831751 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3411,6 +3411,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
/* Take arm out of reset */
if (!brcmf_chip_set_active(bus->ci, rstvec)) {
brcmf_err("error getting out of ARM core reset\n");
+ bcmerror = -EIO;
goto err;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 319/731] blktrace: Fix output non-blktrace event when blk_classic option enabled
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (317 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 318/731] wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 320/731] bpf: Do not zero-extend kfunc return values Greg Kroah-Hartman
` (422 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yang Jihong, Jens Axboe, Sasha Levin
From: Yang Jihong <yangjihong1@huawei.com>
[ Upstream commit f596da3efaf4130ff61cd029558845808df9bf99 ]
When the blk_classic option is enabled, non-blktrace events must be
filtered out. Otherwise, events of other types are output in the blktrace
classic format, which is unexpected.
The problem can be triggered in the following ways:
# echo 1 > /sys/kernel/debug/tracing/options/blk_classic
# echo 1 > /sys/kernel/debug/tracing/events/enable
# echo blk > /sys/kernel/debug/tracing/current_tracer
# cat /sys/kernel/debug/tracing/trace_pipe
Fixes: c71a89615411 ("blktrace: add ftrace plugin")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20221122040410.85113-1-yangjihong1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/trace/blktrace.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index eaa98e2b468f..16b0d3fa56e0 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -1547,7 +1547,8 @@ blk_trace_event_print_binary(struct trace_iterator *iter, int flags,
static enum print_line_t blk_tracer_print_line(struct trace_iterator *iter)
{
- if (!(blk_tracer_flags.val & TRACE_BLK_OPT_CLASSIC))
+ if ((iter->ent->type != TRACE_BLK) ||
+ !(blk_tracer_flags.val & TRACE_BLK_OPT_CLASSIC))
return TRACE_TYPE_UNHANDLED;
return print_one_line(iter, true);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 320/731] bpf: Do not zero-extend kfunc return values
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (318 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 319/731] blktrace: Fix output non-blktrace event when blk_classic option enabled Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 321/731] clk: socfpga: Fix memory leak in socfpga_gate_init() Greg Kroah-Hartman
` (421 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yonghong Song,
Björn Töpel, Yonghong Song, Alexei Starovoitov,
Sasha Levin
From: Björn Töpel <bjorn@rivosinc.com>
[ Upstream commit d35af0a7feb077c43ff0233bba5a8c6e75b73e35 ]
In BPF all global functions, and BPF helpers return a 64-bit
value. For kfunc calls, this is not the case, and they can return
e.g. 32-bit values.
The return register R0 for kfuncs calls can therefore be marked as
subreg_def != DEF_NOT_SUBREG. In general, if a register is marked with
subreg_def != DEF_NOT_SUBREG, some archs (where bpf_jit_needs_zext()
returns true) require the verifier to insert explicit zero-extension
instructions.
For kfuncs calls, however, the caller should do sign/zero extension
for return values. In other words, the compiler is responsible to
insert proper instructions, not the verifier.
An example, provided by Yonghong Song:
$ cat t.c
extern unsigned foo(void);
unsigned bar1(void) {
return foo();
}
unsigned bar2(void) {
if (foo()) return 10; else return 20;
}
$ clang -target bpf -mcpu=v3 -O2 -c t.c && llvm-objdump -d t.o
t.o: file format elf64-bpf
Disassembly of section .text:
0000000000000000 <bar1>:
0: 85 10 00 00 ff ff ff ff call -0x1
1: 95 00 00 00 00 00 00 00 exit
0000000000000010 <bar2>:
2: 85 10 00 00 ff ff ff ff call -0x1
3: bc 01 00 00 00 00 00 00 w1 = w0
4: b4 00 00 00 14 00 00 00 w0 = 0x14
5: 16 01 01 00 00 00 00 00 if w1 == 0x0 goto +0x1 <LBB1_2>
6: b4 00 00 00 0a 00 00 00 w0 = 0xa
0000000000000038 <LBB1_2>:
7: 95 00 00 00 00 00 00 00 exit
If the return value of 'foo()' is used in the BPF program, the proper
zero-extension will be done.
Currently, the verifier correctly marks, say, a 32-bit return value as
subreg_def != DEF_NOT_SUBREG, but will fail performing the actual
zero-extension, due to a verifier bug in
opt_subreg_zext_lo32_rnd_hi32(). load_reg is not properly set to R0,
and the following path will be taken:
if (WARN_ON(load_reg == -1)) {
verbose(env, "verifier bug. zext_dst is set, but no reg is defined\n");
return -EFAULT;
}
A longer discussion from v1 can be found in the link below.
Correct the verifier by avoiding doing explicit zero-extension of R0
for kfunc calls. Note that R0 will still be marked as a sub-register
for return values smaller than 64-bit.
Fixes: 83a2881903f3 ("bpf: Account for BPF_FETCH in insn_has_def32()")
Link: https://lore.kernel.org/bpf/20221202103620.1915679-1-bjorn@kernel.org/
Suggested-by: Yonghong Song <yhs@meta.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221207103540.396496-1-bjorn@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/bpf/verifier.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index b1ca4dbdeecf..488225bb42f6 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -12132,6 +12132,10 @@ static int opt_subreg_zext_lo32_rnd_hi32(struct bpf_verifier_env *env,
if (!bpf_jit_needs_zext() && !is_cmpxchg_insn(&insn))
continue;
+ /* Zero-extension is done by the caller. */
+ if (bpf_pseudo_kfunc_call(&insn))
+ continue;
+
if (WARN_ON(load_reg == -1)) {
verbose(env, "verifier bug. zext_dst is set, but no reg is defined\n");
return -EFAULT;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 321/731] clk: socfpga: Fix memory leak in socfpga_gate_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (319 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 320/731] bpf: Do not zero-extend kfunc return values Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 322/731] net: vmw_vsock: vmci: Check memcpy_from_msg() Greg Kroah-Hartman
` (420 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiu Jianfeng, Dinh Nguyen,
Stephen Boyd, Sasha Levin
From: Xiu Jianfeng <xiujianfeng@huawei.com>
[ Upstream commit 0b8ba891ad4d1ef6bfa4c72efc83f9f9f855f68b ]
Free @socfpga_clk and @ops on the error path to avoid memory leak issue.
Fixes: a30a67be7b6e ("clk: socfpga: Don't have get_parent for single parent ops")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123031622.63171-1-xiujianfeng@huawei.com
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/socfpga/clk-gate.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/socfpga/clk-gate.c b/drivers/clk/socfpga/clk-gate.c
index 1ec9678d8cd3..ee2a2d284113 100644
--- a/drivers/clk/socfpga/clk-gate.c
+++ b/drivers/clk/socfpga/clk-gate.c
@@ -188,8 +188,10 @@ void __init socfpga_gate_init(struct device_node *node)
return;
ops = kmemdup(&gateclk_ops, sizeof(gateclk_ops), GFP_KERNEL);
- if (WARN_ON(!ops))
+ if (WARN_ON(!ops)) {
+ kfree(socfpga_clk);
return;
+ }
rc = of_property_read_u32_array(node, "clk-gate", clk_gate, 2);
if (rc)
@@ -243,6 +245,7 @@ void __init socfpga_gate_init(struct device_node *node)
err = clk_hw_register(NULL, hw_clk);
if (err) {
+ kfree(ops);
kfree(socfpga_clk);
return;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 322/731] net: vmw_vsock: vmci: Check memcpy_from_msg()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (320 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 321/731] clk: socfpga: Fix memory leak in socfpga_gate_init() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 323/731] net: defxx: Fix missing err handling in dfx_init() Greg Kroah-Hartman
` (419 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Artem Chernyshev,
Stefano Garzarella, Vishnu Dasa, David S. Miller, Sasha Levin
From: Artem Chernyshev <artem.chernyshev@red-soft.ru>
[ Upstream commit 44aa5a6dba8283bfda28b1517af4de711c5652a4 ]
vmci_transport_dgram_enqueue() does not check the return value
of memcpy_from_msg(). If memcpy_from_msg() fails, it is possible that
uninitialized memory contents are sent unintentionally instead of user's
message in the datagram to the destination. Return with an error if
memcpy_from_msg() fails.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0f7db23a07af ("vmci_transport: switch ->enqeue_dgram, ->enqueue_stream and ->dequeue_stream to msghdr")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/vmw_vsock/vmci_transport.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/net/vmw_vsock/vmci_transport.c b/net/vmw_vsock/vmci_transport.c
index b17dc9745188..94c1112f1c8c 100644
--- a/net/vmw_vsock/vmci_transport.c
+++ b/net/vmw_vsock/vmci_transport.c
@@ -1711,7 +1711,11 @@ static int vmci_transport_dgram_enqueue(
if (!dg)
return -ENOMEM;
- memcpy_from_msg(VMCI_DG_PAYLOAD(dg), msg, len);
+ err = memcpy_from_msg(VMCI_DG_PAYLOAD(dg), msg, len);
+ if (err) {
+ kfree(dg);
+ return err;
+ }
dg->dst = vmci_make_handle(remote_addr->svm_cid,
remote_addr->svm_port);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 323/731] net: defxx: Fix missing err handling in dfx_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (321 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 322/731] net: vmw_vsock: vmci: Check memcpy_from_msg() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 324/731] net: stmmac: selftests: fix potential memleak in stmmac_test_arpoffload() Greg Kroah-Hartman
` (418 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yongqiang Liu, Jiri Pirko,
David S. Miller, Sasha Levin
From: Yongqiang Liu <liuyongqiang13@huawei.com>
[ Upstream commit ae18dcdff0f8d7e84cd3fd9f496518b5e72d185d ]
When eisa_driver_register() or tc_register_driver() failed,
the modprobe defxx would fail with some err log as follows:
Error: Driver 'defxx' is already registered, aborting...
Fix this issue by adding err hanling in dfx_init().
Fixes: e89a2cfb7d7b5 ("[TC] defxx: TURBOchannel support")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/fddi/defxx.c | 22 ++++++++++++++++++----
1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
index 6d1e3f49a3d3..ebf502290e5f 100644
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -3831,10 +3831,24 @@ static int dfx_init(void)
int status;
status = pci_register_driver(&dfx_pci_driver);
- if (!status)
- status = eisa_driver_register(&dfx_eisa_driver);
- if (!status)
- status = tc_register_driver(&dfx_tc_driver);
+ if (status)
+ goto err_pci_register;
+
+ status = eisa_driver_register(&dfx_eisa_driver);
+ if (status)
+ goto err_eisa_register;
+
+ status = tc_register_driver(&dfx_tc_driver);
+ if (status)
+ goto err_tc_register;
+
+ return 0;
+
+err_tc_register:
+ eisa_driver_unregister(&dfx_eisa_driver);
+err_eisa_register:
+ pci_unregister_driver(&dfx_pci_driver);
+err_pci_register:
return status;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 324/731] net: stmmac: selftests: fix potential memleak in stmmac_test_arpoffload()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (322 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 323/731] net: defxx: Fix missing err handling in dfx_init() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 325/731] net: stmmac: fix possible memory leak in stmmac_dvr_probe() Greg Kroah-Hartman
` (417 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Changzhong, David S. Miller,
Sasha Levin
From: Zhang Changzhong <zhangchangzhong@huawei.com>
[ Upstream commit f150b63f3fa5fdd81e0dd6151e8850268e29438c ]
The skb allocated by stmmac_test_get_arp_skb() hasn't been released in
some error handling case, which will lead to a memory leak. Fix this up
by adding kfree_skb() to release skb.
Compile tested only.
Fixes: 5e3fb0a6e2b3 ("net: stmmac: selftests: Implement the ARP Offload test")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
index dd5c4ef92ef3..ea7200b7b647 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
@@ -1654,12 +1654,16 @@ static int stmmac_test_arpoffload(struct stmmac_priv *priv)
}
ret = stmmac_set_arp_offload(priv, priv->hw, true, ip_addr);
- if (ret)
+ if (ret) {
+ kfree_skb(skb);
goto cleanup;
+ }
ret = dev_set_promiscuity(priv->dev, 1);
- if (ret)
+ if (ret) {
+ kfree_skb(skb);
goto cleanup;
+ }
ret = dev_direct_xmit(skb, 0);
if (ret)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 325/731] net: stmmac: fix possible memory leak in stmmac_dvr_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (323 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 324/731] net: stmmac: selftests: fix potential memleak in stmmac_test_arpoffload() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 326/731] drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init() Greg Kroah-Hartman
` (416 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Leon Romanovsky,
David S. Miller, Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit a137f3f27f9290933fe7e40e6dc8a445781c31a2 ]
The bitmap_free() should be called to free priv->af_xdp_zc_qps
when create_singlethread_workqueue() fails, otherwise there will
be a memory leak, so we add the err path error_wq_init to fix it.
Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index eba97adaf1fb..d987ca727a21 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7046,7 +7046,7 @@ int stmmac_dvr_probe(struct device *device,
priv->wq = create_singlethread_workqueue("stmmac_wq");
if (!priv->wq) {
dev_err(priv->device, "failed to create workqueue\n");
- return -ENOMEM;
+ goto error_wq_init;
}
INIT_WORK(&priv->service_task, stmmac_service_task);
@@ -7273,6 +7273,7 @@ int stmmac_dvr_probe(struct device *device,
stmmac_napi_del(ndev);
error_hw_init:
destroy_workqueue(priv->wq);
+error_wq_init:
bitmap_free(priv->af_xdp_zc_qps);
return ret;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 326/731] drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (324 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 325/731] net: stmmac: fix possible memory leak in stmmac_dvr_probe() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 327/731] of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop() Greg Kroah-Hartman
` (415 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Leon Romanovsky,
David S. Miller, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 01de1123322e4fe1bbd0fcdf0982511b55519c03 ]
If vp alloc failed in qlcnic_sriov_init(), all previously allocated vp
needs to be freed.
Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
index 42a44c97572a..df9b84f6600f 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
@@ -221,6 +221,8 @@ int qlcnic_sriov_init(struct qlcnic_adapter *adapter, int num_vfs)
return 0;
qlcnic_destroy_async_wq:
+ while (i--)
+ kfree(sriov->vf_info[i].vp);
destroy_workqueue(bc->bc_async_wq);
qlcnic_destroy_trans_wq:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 327/731] of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (325 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 326/731] drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 328/731] ethernet: s2io: dont call dev_kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
` (414 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, ruanjinjie, Rob Herring, Sasha Levin
From: ruanjinjie <ruanjinjie@huawei.com>
[ Upstream commit ee9d7a0e754568180a2f8ebc4aad226278a9116f ]
When kmalloc() fail to allocate memory in kasprintf(), fn_1 or fn_2 will
be NULL, and strcmp() will cause null pointer dereference.
Fixes: 2fe0e8769df9 ("of: overlay: check prevents multiple fragments touching same property")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20221211023337.592266-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/of/overlay.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index d1187123c4fc..424682372417 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -547,7 +547,7 @@ static int find_dup_cset_node_entry(struct overlay_changeset *ovcs,
fn_1 = kasprintf(GFP_KERNEL, "%pOF", ce_1->np);
fn_2 = kasprintf(GFP_KERNEL, "%pOF", ce_2->np);
- node_path_match = !strcmp(fn_1, fn_2);
+ node_path_match = !fn_1 || !fn_2 || !strcmp(fn_1, fn_2);
kfree(fn_1);
kfree(fn_2);
if (node_path_match) {
@@ -582,7 +582,7 @@ static int find_dup_cset_prop(struct overlay_changeset *ovcs,
fn_1 = kasprintf(GFP_KERNEL, "%pOF", ce_1->np);
fn_2 = kasprintf(GFP_KERNEL, "%pOF", ce_2->np);
- node_path_match = !strcmp(fn_1, fn_2);
+ node_path_match = !fn_1 || !fn_2 || !strcmp(fn_1, fn_2);
kfree(fn_1);
kfree(fn_2);
if (node_path_match &&
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 328/731] ethernet: s2io: dont call dev_kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (326 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 327/731] of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 329/731] net: farsync: Fix kmemleak when rmmods farsync Greg Kroah-Hartman
` (413 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, David S. Miller,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 6cee96e09df54ae17784c0f38a49e0ed8229b825 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in free_tx_buffers() to drop
the SKBs in tx buffers, when the card is down, so replace it with
dev_kfree_skb_irq() here.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/neterion/s2io.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index f4703f53bcdc..65ccdbe665e5 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2386,7 +2386,7 @@ static void free_tx_buffers(struct s2io_nic *nic)
skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
if (skb) {
swstats->mem_freed += skb->truesize;
- dev_kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
cnt++;
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 329/731] net: farsync: Fix kmemleak when rmmods farsync
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (327 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 328/731] ethernet: s2io: dont call dev_kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 330/731] net/tunnel: wait until all sk_user_data reader finish before releasing the sock Greg Kroah-Hartman
` (412 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Li Zetao, Jiri Pirko,
David S. Miller, Sasha Levin
From: Li Zetao <lizetao1@huawei.com>
[ Upstream commit 2f623aaf9f31de968dea6169849706a2f9be444c ]
There are two memory leaks reported by kmemleak:
unreferenced object 0xffff888114b20200 (size 128):
comm "modprobe", pid 4846, jiffies 4295146524 (age 401.345s)
hex dump (first 32 bytes):
e0 62 57 09 81 88 ff ff e0 62 57 09 81 88 ff ff .bW......bW.....
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffff83d35c78>] __hw_addr_add_ex+0x198/0x6c0
[<ffffffff83d3989d>] dev_addr_init+0x13d/0x230
[<ffffffff83d1063d>] alloc_netdev_mqs+0x10d/0xe50
[<ffffffff82b4a06e>] alloc_hdlcdev+0x2e/0x80
[<ffffffffa016a741>] fst_add_one+0x601/0x10e0 [farsync]
...
unreferenced object 0xffff88810b85b000 (size 1024):
comm "modprobe", pid 4846, jiffies 4295146523 (age 401.346s)
hex dump (first 32 bytes):
00 00 b0 02 00 c9 ff ff 00 70 0a 00 00 c9 ff ff .........p......
00 00 00 f2 00 00 00 f3 0a 00 00 00 02 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffffa016a294>] fst_add_one+0x154/0x10e0 [farsync]
[<ffffffff82060e83>] local_pci_probe+0xd3/0x170
...
The root cause is traced to the netdev and fst_card_info are not freed
when removes one fst in fst_remove_one(), which may trigger oom if
repeated insmod and rmmod module.
Fix it by adding free_netdev() and kfree() in fst_remove_one(), just as
the operations on the error handling path in fst_add_one().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wan/farsync.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 6a212c085435..5b01642ca44e 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -2545,6 +2545,7 @@ fst_remove_one(struct pci_dev *pdev)
struct net_device *dev = port_to_dev(&card->ports[i]);
unregister_hdlc_device(dev);
+ free_netdev(dev);
}
fst_disable_intr(card);
@@ -2564,6 +2565,7 @@ fst_remove_one(struct pci_dev *pdev)
card->tx_dma_handle_card);
}
fst_card_array[card->card_no] = NULL;
+ kfree(card);
}
static struct pci_driver fst_driver = {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 330/731] net/tunnel: wait until all sk_user_data reader finish before releasing the sock
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (328 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 329/731] net: farsync: Fix kmemleak when rmmods farsync Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 331/731] net: apple: mace: dont call dev_kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
` (411 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jianlin Shi, Jakub Sitnicki,
Hangbin Liu, Jiri Pirko, David S. Miller, Sasha Levin
From: Hangbin Liu <liuhangbin@gmail.com>
[ Upstream commit 3cf7203ca620682165706f70a1b12b5194607dce ]
There is a race condition in vxlan that when deleting a vxlan device
during receiving packets, there is a possibility that the sock is
released after getting vxlan_sock vs from sk_user_data. Then in
later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got
NULL pointer dereference. e.g.
#0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757
#1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d
#2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48
#3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b
#4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb
#5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542
#6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62
[exception RIP: vxlan_ecn_decapsulate+0x3b]
RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246
RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000
RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700
RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae
R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700
R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan]
#8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507
#9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45
#10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807
#11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951
#12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde
#13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b
#14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139
#15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a
#16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3
#17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca
#18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3
Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh
Fix this by waiting for all sk_user_data reader to finish before
releasing the sock.
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Fixes: 6a93cc905274 ("udp-tunnel: Add a few more UDP tunnel APIs")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/udp_tunnel_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/ipv4/udp_tunnel_core.c b/net/ipv4/udp_tunnel_core.c
index 46101fd67a47..1ff5b8e30bb9 100644
--- a/net/ipv4/udp_tunnel_core.c
+++ b/net/ipv4/udp_tunnel_core.c
@@ -179,6 +179,7 @@ EXPORT_SYMBOL_GPL(udp_tunnel_xmit_skb);
void udp_tunnel_sock_release(struct socket *sock)
{
rcu_assign_sk_user_data(sock->sk, NULL);
+ synchronize_rcu();
kernel_sock_shutdown(sock, SHUT_RDWR);
sock_release(sock);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 331/731] net: apple: mace: dont call dev_kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (329 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 330/731] net/tunnel: wait until all sk_user_data reader finish before releasing the sock Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 332/731] net: apple: bmac: " Greg Kroah-Hartman
` (410 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, David S. Miller,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 3dfe3486c1cd4f82b466b7d307f23777137b8acc ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in mace_tx_timeout() to drop
the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/apple/mace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/apple/mace.c b/drivers/net/ethernet/apple/mace.c
index 4b80e3a52a19..44037e9e197f 100644
--- a/drivers/net/ethernet/apple/mace.c
+++ b/drivers/net/ethernet/apple/mace.c
@@ -841,7 +841,7 @@ static void mace_tx_timeout(struct timer_list *t)
if (mp->tx_bad_runt) {
mp->tx_bad_runt = 0;
} else if (i != mp->tx_fill) {
- dev_kfree_skb(mp->tx_bufs[i]);
+ dev_kfree_skb_irq(mp->tx_bufs[i]);
if (++i >= N_TX_RING)
i = 0;
mp->tx_empty = i;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 332/731] net: apple: bmac: dont call dev_kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (330 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 331/731] net: apple: mace: dont call dev_kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 333/731] net: emaclite: " Greg Kroah-Hartman
` (409 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, David S. Miller,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 5fe02e046e6422c4adfdbc50206ec7186077da24 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in bmac_tx_timeout() to drop
the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/apple/bmac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c
index a989d2df59ad..7a966361d83f 100644
--- a/drivers/net/ethernet/apple/bmac.c
+++ b/drivers/net/ethernet/apple/bmac.c
@@ -1511,7 +1511,7 @@ static void bmac_tx_timeout(struct timer_list *t)
i = bp->tx_empty;
++dev->stats.tx_errors;
if (i != bp->tx_fill) {
- dev_kfree_skb(bp->tx_bufs[i]);
+ dev_kfree_skb_irq(bp->tx_bufs[i]);
bp->tx_bufs[i] = NULL;
if (++i >= N_TX_RING) i = 0;
bp->tx_empty = i;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 333/731] net: emaclite: dont call dev_kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (331 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 332/731] net: apple: bmac: " Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 334/731] net: ethernet: dnet: " Greg Kroah-Hartman
` (408 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, David S. Miller,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit d1678bf45f21fa5ae4a456f821858679556ea5f8 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in xemaclite_tx_timeout() to
drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 97c1d1ecba34..b1971c4d5313 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -543,7 +543,7 @@ static void xemaclite_tx_timeout(struct net_device *dev, unsigned int txqueue)
xemaclite_enable_interrupts(lp);
if (lp->deferred_skb) {
- dev_kfree_skb(lp->deferred_skb);
+ dev_kfree_skb_irq(lp->deferred_skb);
lp->deferred_skb = NULL;
dev->stats.tx_errors++;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 334/731] net: ethernet: dnet: dont call dev_kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (332 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 333/731] net: emaclite: " Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 335/731] hamradio: " Greg Kroah-Hartman
` (407 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, David S. Miller,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit f07fadcbee2a5e84caa67c7c445424200bffb60b ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
In this case, the lock is used to protected 'bp', so we can move
dev_kfree_skb() after the spin_unlock_irqrestore().
Fixes: 4796417417a6 ("dnet: Dave DNET ethernet controller driver (updated)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/dnet.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/dnet.c b/drivers/net/ethernet/dnet.c
index 6c51cf991dad..14dc2e13bf03 100644
--- a/drivers/net/ethernet/dnet.c
+++ b/drivers/net/ethernet/dnet.c
@@ -550,11 +550,11 @@ static netdev_tx_t dnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
skb_tx_timestamp(skb);
+ spin_unlock_irqrestore(&bp->lock, flags);
+
/* free the buffer */
dev_kfree_skb(skb);
- spin_unlock_irqrestore(&bp->lock, flags);
-
return NETDEV_TX_OK;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 335/731] hamradio: dont call dev_kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (333 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 334/731] net: ethernet: dnet: " Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 336/731] net: amd: lance: " Greg Kroah-Hartman
` (406 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, David S. Miller,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 3727f742915f04f6fc550b80cf406999bd4e90d0 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In scc_discard_buffers(), dev_kfree_skb() is called to discard the SKBs,
so replace it with dev_kfree_skb_irq().
In scc_net_tx(), dev_kfree_skb() is called to drop the SKB that exceed
queue length, so replace it with dev_kfree_skb_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/hamradio/scc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c
index e0bb131a33d7..39db3cae4dd1 100644
--- a/drivers/net/hamradio/scc.c
+++ b/drivers/net/hamradio/scc.c
@@ -301,12 +301,12 @@ static inline void scc_discard_buffers(struct scc_channel *scc)
spin_lock_irqsave(&scc->lock, flags);
if (scc->tx_buff != NULL)
{
- dev_kfree_skb(scc->tx_buff);
+ dev_kfree_skb_irq(scc->tx_buff);
scc->tx_buff = NULL;
}
while (!skb_queue_empty(&scc->tx_queue))
- dev_kfree_skb(skb_dequeue(&scc->tx_queue));
+ dev_kfree_skb_irq(skb_dequeue(&scc->tx_queue));
spin_unlock_irqrestore(&scc->lock, flags);
}
@@ -1668,7 +1668,7 @@ static netdev_tx_t scc_net_tx(struct sk_buff *skb, struct net_device *dev)
if (skb_queue_len(&scc->tx_queue) > scc->dev->tx_queue_len) {
struct sk_buff *skb_del;
skb_del = skb_dequeue(&scc->tx_queue);
- dev_kfree_skb(skb_del);
+ dev_kfree_skb_irq(skb_del);
}
skb_queue_tail(&scc->tx_queue, skb);
netif_trans_update(dev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 336/731] net: amd: lance: dont call dev_kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (334 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 335/731] hamradio: " Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 337/731] af_unix: call proto_unregister() in the error path in af_unix_init() Greg Kroah-Hartman
` (405 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, David S. Miller,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 6151d105dfce8c23edf30eed35e97f3d9b96a35c ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In these two cases, dev_kfree_skb() is called consume the xmited SKB,
so replace it with dev_consume_skb_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/amd/atarilance.c | 2 +-
drivers/net/ethernet/amd/lance.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/amd/atarilance.c b/drivers/net/ethernet/amd/atarilance.c
index 9d2f49fd945e..a0971ed00453 100644
--- a/drivers/net/ethernet/amd/atarilance.c
+++ b/drivers/net/ethernet/amd/atarilance.c
@@ -821,7 +821,7 @@ lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
lp->memcpy_f( PKTBUF_ADDR(head), (void *)skb->data, skb->len );
head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
dev->stats.tx_bytes += skb->len;
- dev_kfree_skb( skb );
+ dev_consume_skb_irq(skb);
lp->cur_tx++;
while( lp->cur_tx >= TX_RING_SIZE && lp->dirty_tx >= TX_RING_SIZE ) {
lp->cur_tx -= TX_RING_SIZE;
diff --git a/drivers/net/ethernet/amd/lance.c b/drivers/net/ethernet/amd/lance.c
index 945bf1d87507..6c2d72024e21 100644
--- a/drivers/net/ethernet/amd/lance.c
+++ b/drivers/net/ethernet/amd/lance.c
@@ -999,7 +999,7 @@ static netdev_tx_t lance_start_xmit(struct sk_buff *skb,
skb_copy_from_linear_data(skb, &lp->tx_bounce_buffs[entry], skb->len);
lp->tx_ring[entry].base =
((u32)isa_virt_to_bus((lp->tx_bounce_buffs + entry)) & 0xffffff) | 0x83000000;
- dev_kfree_skb(skb);
+ dev_consume_skb_irq(skb);
} else {
lp->tx_skbuff[entry] = skb;
lp->tx_ring[entry].base = ((u32)isa_virt_to_bus(skb->data) & 0xffffff) | 0x83000000;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 337/731] af_unix: call proto_unregister() in the error path in af_unix_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (335 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 336/731] net: amd: lance: " Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 338/731] net: amd-xgbe: Fix logic around active and passive cables Greg Kroah-Hartman
` (404 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Simon Horman,
Kuniyuki Iwashima, David S. Miller, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 73e341e0281a35274629e9be27eae2f9b1b492bf ]
If register unix_stream_proto returns error, unix_dgram_proto needs
be unregistered.
Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/unix/af_unix.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index a579e28bd213..545823c1d5ed 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -3401,6 +3401,7 @@ static int __init af_unix_init(void)
rc = proto_register(&unix_stream_proto, 1);
if (rc != 0) {
pr_crit("%s: Cannot create unix_sock SLAB cache!\n", __func__);
+ proto_unregister(&unix_dgram_proto);
goto out;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 338/731] net: amd-xgbe: Fix logic around active and passive cables
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (336 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 337/731] af_unix: call proto_unregister() in the error path in af_unix_init() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 339/731] net: amd-xgbe: Check only the minimum speed for active/passive cables Greg Kroah-Hartman
` (403 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tom Lendacky, David S. Miller, Sasha Levin
From: Tom Lendacky <thomas.lendacky@amd.com>
[ Upstream commit 4998006c73afe44e2f639d55bd331c6c26eb039f ]
SFP+ active and passive cables are copper cables with fixed SFP+ end
connectors. Due to a misinterpretation of this, SFP+ active cables could
end up not being recognized, causing the driver to fail to establish a
connection.
Introduce a new enum in SFP+ cable types, XGBE_SFP_CABLE_FIBER, that is
the default cable type, and handle active and passive cables when they are
specifically detected.
Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index a7166cd1179f..a9a734454973 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -189,6 +189,7 @@ enum xgbe_sfp_cable {
XGBE_SFP_CABLE_UNKNOWN = 0,
XGBE_SFP_CABLE_ACTIVE,
XGBE_SFP_CABLE_PASSIVE,
+ XGBE_SFP_CABLE_FIBER,
};
enum xgbe_sfp_base {
@@ -1149,16 +1150,18 @@ static void xgbe_phy_sfp_parse_eeprom(struct xgbe_prv_data *pdata)
phy_data->sfp_tx_fault = xgbe_phy_check_sfp_tx_fault(phy_data);
phy_data->sfp_rx_los = xgbe_phy_check_sfp_rx_los(phy_data);
- /* Assume ACTIVE cable unless told it is PASSIVE */
+ /* Assume FIBER cable unless told otherwise */
if (sfp_base[XGBE_SFP_BASE_CABLE] & XGBE_SFP_BASE_CABLE_PASSIVE) {
phy_data->sfp_cable = XGBE_SFP_CABLE_PASSIVE;
phy_data->sfp_cable_len = sfp_base[XGBE_SFP_BASE_CU_CABLE_LEN];
- } else {
+ } else if (sfp_base[XGBE_SFP_BASE_CABLE] & XGBE_SFP_BASE_CABLE_ACTIVE) {
phy_data->sfp_cable = XGBE_SFP_CABLE_ACTIVE;
+ } else {
+ phy_data->sfp_cable = XGBE_SFP_CABLE_FIBER;
}
/* Determine the type of SFP */
- if (phy_data->sfp_cable == XGBE_SFP_CABLE_PASSIVE &&
+ if (phy_data->sfp_cable != XGBE_SFP_CABLE_FIBER &&
xgbe_phy_sfp_bit_rate(sfp_eeprom, XGBE_SFP_SPEED_10000))
phy_data->sfp_base = XGBE_SFP_BASE_10000_CR;
else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_SR)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 339/731] net: amd-xgbe: Check only the minimum speed for active/passive cables
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (337 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 338/731] net: amd-xgbe: Fix logic around active and passive cables Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 340/731] can: tcan4x5x: Remove invalid write in clear_interrupts Greg Kroah-Hartman
` (402 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tom Lendacky, David S. Miller, Sasha Levin
From: Tom Lendacky <thomas.lendacky@amd.com>
[ Upstream commit f8ab263d4d48e6dab752029bf562f20a2ee630ed ]
There are cables that exist that can support speeds in excess of 10GbE.
The driver, however, restricts the EEPROM advertised nominal bitrate to
a specific range, which can prevent usage of cables that can support,
for example, up to 25GbE.
Rather than checking that an active or passive cable supports a specific
range, only check for a minimum supported speed.
Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index a9a734454973..97e32c0490f8 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -237,10 +237,7 @@ enum xgbe_sfp_speed {
#define XGBE_SFP_BASE_BR 12
#define XGBE_SFP_BASE_BR_1GBE_MIN 0x0a
-#define XGBE_SFP_BASE_BR_1GBE_MAX 0x0d
#define XGBE_SFP_BASE_BR_10GBE_MIN 0x64
-#define XGBE_SFP_BASE_BR_10GBE_MAX 0x68
-#define XGBE_MOLEX_SFP_BASE_BR_10GBE_MAX 0x78
#define XGBE_SFP_BASE_CU_CABLE_LEN 18
@@ -827,29 +824,22 @@ static void xgbe_phy_sfp_phy_settings(struct xgbe_prv_data *pdata)
static bool xgbe_phy_sfp_bit_rate(struct xgbe_sfp_eeprom *sfp_eeprom,
enum xgbe_sfp_speed sfp_speed)
{
- u8 *sfp_base, min, max;
+ u8 *sfp_base, min;
sfp_base = sfp_eeprom->base;
switch (sfp_speed) {
case XGBE_SFP_SPEED_1000:
min = XGBE_SFP_BASE_BR_1GBE_MIN;
- max = XGBE_SFP_BASE_BR_1GBE_MAX;
break;
case XGBE_SFP_SPEED_10000:
min = XGBE_SFP_BASE_BR_10GBE_MIN;
- if (memcmp(&sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_NAME],
- XGBE_MOLEX_VENDOR, XGBE_SFP_BASE_VENDOR_NAME_LEN) == 0)
- max = XGBE_MOLEX_SFP_BASE_BR_10GBE_MAX;
- else
- max = XGBE_SFP_BASE_BR_10GBE_MAX;
break;
default:
return false;
}
- return ((sfp_base[XGBE_SFP_BASE_BR] >= min) &&
- (sfp_base[XGBE_SFP_BASE_BR] <= max));
+ return sfp_base[XGBE_SFP_BASE_BR] >= min;
}
static void xgbe_phy_free_phy_device(struct xgbe_prv_data *pdata)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 340/731] can: tcan4x5x: Remove invalid write in clear_interrupts
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (338 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 339/731] net: amd-xgbe: Check only the minimum speed for active/passive cables Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 341/731] can: m_can: Call the RAM init directly from m_can_chip_config Greg Kroah-Hartman
` (401 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Markus Schneider-Pargmann,
Marc Kleine-Budde, Sasha Levin
From: Markus Schneider-Pargmann <msp@baylibre.com>
[ Upstream commit 40c9e4f676abbe194541d88e796341c92d5a13c0 ]
Register 0x824 TCAN4X5X_MCAN_INT_REG is a read-only register. Any writes
to this register do not have any effect.
Remove this write. The m_can driver aldready clears the interrupts in
m_can_isr() by writing to M_CAN_IR which is translated to register
0x1050 which is a writable version of this register.
Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-9-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/m_can/tcan4x5x-core.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
index 04687b15b250..9b735eccec8a 100644
--- a/drivers/net/can/m_can/tcan4x5x-core.c
+++ b/drivers/net/can/m_can/tcan4x5x-core.c
@@ -204,11 +204,6 @@ static int tcan4x5x_clear_interrupts(struct m_can_classdev *cdev)
if (ret)
return ret;
- ret = tcan4x5x_write_tcan_reg(cdev, TCAN4X5X_MCAN_INT_REG,
- TCAN4X5X_ENABLE_MCAN_INT);
- if (ret)
- return ret;
-
ret = tcan4x5x_write_tcan_reg(cdev, TCAN4X5X_INT_FLAGS,
TCAN4X5X_CLEAR_ALL_INT);
if (ret)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 341/731] can: m_can: Call the RAM init directly from m_can_chip_config
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (339 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 340/731] can: tcan4x5x: Remove invalid write in clear_interrupts Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 342/731] can: tcan4x5x: Fix use of register error status mask Greg Kroah-Hartman
` (400 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marc Kleine-Budde, Vivek Yadav, Sasha Levin
From: Vivek Yadav <vivek.2311@samsung.com>
[ Upstream commit eaacfeaca7ad0804b9a6eff7afeba93a87db7638 ]
When we try to access the mcan message ram addresses during the probe,
hclk is gated by any other drivers or disabled, because of that probe
gets failed.
Move the mram init functionality to mcan chip config called by
m_can_start from mcan open function, by that time clocks are
enabled.
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Vivek Yadav <vivek.2311@samsung.com>
Link: https://lore.kernel.org/all/20221207100632.96200-2-vivek.2311@samsung.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of: 67727a17a6b3 ("can: tcan4x5x: Fix use of register error status mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/m_can/m_can.c | 32 +++++++++++++++++++++-----
drivers/net/can/m_can/m_can_platform.c | 4 ----
drivers/net/can/m_can/tcan4x5x-core.c | 5 ----
3 files changed, 26 insertions(+), 15 deletions(-)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 46ab6155795c..e027229c1955 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1248,10 +1248,17 @@ static int m_can_set_bittiming(struct net_device *dev)
* - setup bittiming
* - configure timestamp generation
*/
-static void m_can_chip_config(struct net_device *dev)
+static int m_can_chip_config(struct net_device *dev)
{
struct m_can_classdev *cdev = netdev_priv(dev);
u32 cccr, test;
+ int err;
+
+ err = m_can_init_ram(cdev);
+ if (err) {
+ dev_err(cdev->dev, "Message RAM configuration failed\n");
+ return err;
+ }
m_can_config_endisable(cdev, true);
@@ -1375,18 +1382,25 @@ static void m_can_chip_config(struct net_device *dev)
if (cdev->ops->init)
cdev->ops->init(cdev);
+
+ return 0;
}
-static void m_can_start(struct net_device *dev)
+static int m_can_start(struct net_device *dev)
{
struct m_can_classdev *cdev = netdev_priv(dev);
+ int ret;
/* basic m_can configuration */
- m_can_chip_config(dev);
+ ret = m_can_chip_config(dev);
+ if (ret)
+ return ret;
cdev->can.state = CAN_STATE_ERROR_ACTIVE;
m_can_enable_all_interrupts(cdev);
+
+ return 0;
}
static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
@@ -1824,7 +1838,9 @@ static int m_can_open(struct net_device *dev)
}
/* start the m_can controller */
- m_can_start(dev);
+ err = m_can_start(dev);
+ if (err)
+ goto exit_irq_fail;
can_led_event(dev, CAN_LED_EVENT_OPEN);
@@ -2082,9 +2098,13 @@ int m_can_class_resume(struct device *dev)
ret = m_can_clk_start(cdev);
if (ret)
return ret;
+ ret = m_can_start(ndev);
+ if (ret) {
+ m_can_clk_stop(cdev);
+
+ return ret;
+ }
- m_can_init_ram(cdev);
- m_can_start(ndev);
netif_device_attach(ndev);
netif_start_queue(ndev);
}
diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
index eee47bad0592..de6d8e01bf2e 100644
--- a/drivers/net/can/m_can/m_can_platform.c
+++ b/drivers/net/can/m_can/m_can_platform.c
@@ -140,10 +140,6 @@ static int m_can_plat_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mcan_class);
- ret = m_can_init_ram(mcan_class);
- if (ret)
- goto probe_fail;
-
pm_runtime_enable(mcan_class->dev);
ret = m_can_class_register(mcan_class);
if (ret)
diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
index 9b735eccec8a..a0eee69e52ea 100644
--- a/drivers/net/can/m_can/tcan4x5x-core.c
+++ b/drivers/net/can/m_can/tcan4x5x-core.c
@@ -229,11 +229,6 @@ static int tcan4x5x_init(struct m_can_classdev *cdev)
if (ret)
return ret;
- /* Zero out the MCAN buffers */
- ret = m_can_init_ram(cdev);
- if (ret)
- return ret;
-
ret = regmap_update_bits(tcan4x5x->regmap, TCAN4X5X_CONFIG,
TCAN4X5X_MODE_SEL_MASK, TCAN4X5X_MODE_NORMAL);
if (ret)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 342/731] can: tcan4x5x: Fix use of register error status mask
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (340 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 341/731] can: m_can: Call the RAM init directly from m_can_chip_config Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 343/731] net: lan9303: Fix read error execution path Greg Kroah-Hartman
` (399 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Markus Schneider-Pargmann,
Marc Kleine-Budde, Sasha Levin
From: Markus Schneider-Pargmann <msp@baylibre.com>
[ Upstream commit 67727a17a6b375d68fe569b77e6516b034b834c0 ]
TCAN4X5X_ERROR_STATUS is not a status register that needs clearing
during interrupt handling. Instead this is a masking register that masks
error interrupts. Writing TCAN4X5X_CLEAR_ALL_INT to this register
effectively masks everything.
Rename the register and mask all error interrupts only once by writing
to the register in tcan4x5x_init.
Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-10-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/m_can/tcan4x5x-core.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
index a0eee69e52ea..c83b347be1cf 100644
--- a/drivers/net/can/m_can/tcan4x5x-core.c
+++ b/drivers/net/can/m_can/tcan4x5x-core.c
@@ -10,7 +10,7 @@
#define TCAN4X5X_DEV_ID1 0x04
#define TCAN4X5X_REV 0x08
#define TCAN4X5X_STATUS 0x0C
-#define TCAN4X5X_ERROR_STATUS 0x10
+#define TCAN4X5X_ERROR_STATUS_MASK 0x10
#define TCAN4X5X_CONTROL 0x14
#define TCAN4X5X_CONFIG 0x800
@@ -204,12 +204,7 @@ static int tcan4x5x_clear_interrupts(struct m_can_classdev *cdev)
if (ret)
return ret;
- ret = tcan4x5x_write_tcan_reg(cdev, TCAN4X5X_INT_FLAGS,
- TCAN4X5X_CLEAR_ALL_INT);
- if (ret)
- return ret;
-
- return tcan4x5x_write_tcan_reg(cdev, TCAN4X5X_ERROR_STATUS,
+ return tcan4x5x_write_tcan_reg(cdev, TCAN4X5X_INT_FLAGS,
TCAN4X5X_CLEAR_ALL_INT);
}
@@ -229,6 +224,11 @@ static int tcan4x5x_init(struct m_can_classdev *cdev)
if (ret)
return ret;
+ ret = tcan4x5x_write_tcan_reg(cdev, TCAN4X5X_ERROR_STATUS_MASK,
+ TCAN4X5X_CLEAR_ALL_INT);
+ if (ret)
+ return ret;
+
ret = regmap_update_bits(tcan4x5x->regmap, TCAN4X5X_CONFIG,
TCAN4X5X_MODE_SEL_MASK, TCAN4X5X_MODE_NORMAL);
if (ret)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 343/731] net: lan9303: Fix read error execution path
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (341 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 342/731] can: tcan4x5x: Fix use of register error status mask Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 344/731] ntb_netdev: Use dev_kfree_skb_any() in interrupt context Greg Kroah-Hartman
` (398 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jerry Ray, Vladimir Oltean,
Florian Fainelli, Jakub Kicinski, Sasha Levin
From: Jerry Ray <jerry.ray@microchip.com>
[ Upstream commit 8964916d206071b058c6351f88b1966bd58cbde0 ]
This patch fixes an issue where a read failure of a port statistic counter
will return unknown results. While it is highly unlikely the read will
ever fail, it is much cleaner to return a zero for the stat count.
Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221209153502.7429-1-jerry.ray@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/lan9303-core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 59a803e3c8d0..22547b10dfe5 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -1003,9 +1003,11 @@ static void lan9303_get_ethtool_stats(struct dsa_switch *ds, int port,
ret = lan9303_read_switch_port(
chip, port, lan9303_mib[u].offset, ®);
- if (ret)
+ if (ret) {
dev_warn(chip->dev, "Reading status port %d reg %u failed\n",
port, lan9303_mib[u].offset);
+ reg = 0;
+ }
data[u] = reg;
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 344/731] ntb_netdev: Use dev_kfree_skb_any() in interrupt context
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (342 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 343/731] net: lan9303: Fix read error execution path Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 345/731] sctp: sysctl: make extra pointers netns aware Greg Kroah-Hartman
` (397 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eric Pilmore, Dave Jiang,
Jakub Kicinski, Sasha Levin
From: Eric Pilmore <epilmore@gigaio.com>
[ Upstream commit 5f7d78b2b12a9d561f48fa00bab29b40f4616dad ]
TX/RX callback handlers (ntb_netdev_tx_handler(),
ntb_netdev_rx_handler()) can be called in interrupt
context via the DMA framework when the respective
DMA operations have completed. As such, any calls
by these routines to free skb's, should use the
interrupt context safe dev_kfree_skb_any() function.
Previously, these callback handlers would call the
interrupt unsafe version of dev_kfree_skb(). This has
not presented an issue on Intel IOAT DMA engines as
that driver utilizes tasklets rather than a hard
interrupt handler, like the AMD PTDMA DMA driver.
On AMD systems, a kernel WARNING message is
encountered, which is being issued from
skb_release_head_state() due to in_hardirq()
being true.
Besides the user visible WARNING from the kernel,
the other symptom of this bug was that TCP/IP performance
across the ntb_netdev interface was very poor, i.e.
approximately an order of magnitude below what was
expected. With the repair to use dev_kfree_skb_any(),
kernel WARNINGs from skb_release_head_state() ceased
and TCP/IP performance, as measured by iperf, was on
par with expected results, approximately 20 Gb/s on
AMD Milan based server. Note that this performance
is comparable with Intel based servers.
Fixes: 765ccc7bc3d91 ("ntb_netdev: correct skb leak")
Fixes: 548c237c0a997 ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Eric Pilmore <epilmore@gigaio.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221209000659.8318-1-epilmore@gigaio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ntb_netdev.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ntb_netdev.c b/drivers/net/ntb_netdev.c
index 1b7d588ff3c5..b701ee83e64a 100644
--- a/drivers/net/ntb_netdev.c
+++ b/drivers/net/ntb_netdev.c
@@ -137,7 +137,7 @@ static void ntb_netdev_rx_handler(struct ntb_transport_qp *qp, void *qp_data,
enqueue_again:
rc = ntb_transport_rx_enqueue(qp, skb, skb->data, ndev->mtu + ETH_HLEN);
if (rc) {
- dev_kfree_skb(skb);
+ dev_kfree_skb_any(skb);
ndev->stats.rx_errors++;
ndev->stats.rx_fifo_errors++;
}
@@ -192,7 +192,7 @@ static void ntb_netdev_tx_handler(struct ntb_transport_qp *qp, void *qp_data,
ndev->stats.tx_aborted_errors++;
}
- dev_kfree_skb(skb);
+ dev_kfree_skb_any(skb);
if (ntb_transport_tx_free_entry(dev->qp) >= tx_start) {
/* Make sure anybody stopping the queue after this sees the new
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 345/731] sctp: sysctl: make extra pointers netns aware
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (343 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 344/731] ntb_netdev: Use dev_kfree_skb_any() in interrupt context Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 346/731] Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMS Greg Kroah-Hartman
` (396 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marcelo Ricardo Leitner,
Jakub Kicinski, Firo Yang, Sasha Levin
From: Firo Yang <firo.yang@suse.com>
[ Upstream commit da05cecc4939c0410d56c29e252998b192756318 ]
Recently, a customer reported that from their container whose
net namespace is different to the host's init_net, they can't set
the container's net.sctp.rto_max to any value smaller than
init_net.sctp.rto_min.
For instance,
Host:
sudo sysctl net.sctp.rto_min
net.sctp.rto_min = 1000
Container:
echo 100 > /mnt/proc-net/sctp/rto_min
echo 400 > /mnt/proc-net/sctp/rto_max
echo: write error: Invalid argument
This is caused by the check made from this'commit 4f3fdf3bc59c
("sctp: add check rto_min and rto_max in sysctl")'
When validating the input value, it's always referring the boundary
value set for the init_net namespace.
Having container's rto_max smaller than host's init_net.sctp.rto_min
does make sense. Consider that the rto between two containers on the
same host is very likely smaller than it for two hosts.
So to fix this problem, as suggested by Marcelo, this patch makes the
extra pointers of rto_min, rto_max, pf_retrans, and ps_retrans point
to the corresponding variables from the newly created net namespace while
the new net namespace is being registered in sctp_sysctl_net_register.
Fixes: 4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl")
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Firo Yang <firo.yang@suse.com>
Link: https://lore.kernel.org/r/20221209054854.23889-1-firo.yang@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/sctp/sysctl.c | 73 ++++++++++++++++++++++++++++-------------------
1 file changed, 44 insertions(+), 29 deletions(-)
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index b46a416787ec..43ebf090029d 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -84,17 +84,18 @@ static struct ctl_table sctp_table[] = {
{ /* sentinel */ }
};
+/* The following index defines are used in sctp_sysctl_net_register().
+ * If you add new items to the sctp_net_table, please ensure that
+ * the index values of these defines hold the same meaning indicated by
+ * their macro names when they appear in sctp_net_table.
+ */
+#define SCTP_RTO_MIN_IDX 0
+#define SCTP_RTO_MAX_IDX 1
+#define SCTP_PF_RETRANS_IDX 2
+#define SCTP_PS_RETRANS_IDX 3
+
static struct ctl_table sctp_net_table[] = {
- {
- .procname = "rto_initial",
- .data = &init_net.sctp.rto_initial,
- .maxlen = sizeof(unsigned int),
- .mode = 0644,
- .proc_handler = proc_dointvec_minmax,
- .extra1 = SYSCTL_ONE,
- .extra2 = &timer_max
- },
- {
+ [SCTP_RTO_MIN_IDX] = {
.procname = "rto_min",
.data = &init_net.sctp.rto_min,
.maxlen = sizeof(unsigned int),
@@ -103,7 +104,7 @@ static struct ctl_table sctp_net_table[] = {
.extra1 = SYSCTL_ONE,
.extra2 = &init_net.sctp.rto_max
},
- {
+ [SCTP_RTO_MAX_IDX] = {
.procname = "rto_max",
.data = &init_net.sctp.rto_max,
.maxlen = sizeof(unsigned int),
@@ -112,6 +113,33 @@ static struct ctl_table sctp_net_table[] = {
.extra1 = &init_net.sctp.rto_min,
.extra2 = &timer_max
},
+ [SCTP_PF_RETRANS_IDX] = {
+ .procname = "pf_retrans",
+ .data = &init_net.sctp.pf_retrans,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = SYSCTL_ZERO,
+ .extra2 = &init_net.sctp.ps_retrans,
+ },
+ [SCTP_PS_RETRANS_IDX] = {
+ .procname = "ps_retrans",
+ .data = &init_net.sctp.ps_retrans,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &init_net.sctp.pf_retrans,
+ .extra2 = &ps_retrans_max,
+ },
+ {
+ .procname = "rto_initial",
+ .data = &init_net.sctp.rto_initial,
+ .maxlen = sizeof(unsigned int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = SYSCTL_ONE,
+ .extra2 = &timer_max
+ },
{
.procname = "rto_alpha_exp_divisor",
.data = &init_net.sctp.rto_alpha,
@@ -207,24 +235,6 @@ static struct ctl_table sctp_net_table[] = {
.extra1 = SYSCTL_ONE,
.extra2 = SYSCTL_INT_MAX,
},
- {
- .procname = "pf_retrans",
- .data = &init_net.sctp.pf_retrans,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dointvec_minmax,
- .extra1 = SYSCTL_ZERO,
- .extra2 = &init_net.sctp.ps_retrans,
- },
- {
- .procname = "ps_retrans",
- .data = &init_net.sctp.ps_retrans,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dointvec_minmax,
- .extra1 = &init_net.sctp.pf_retrans,
- .extra2 = &ps_retrans_max,
- },
{
.procname = "sndbuf_policy",
.data = &init_net.sctp.sndbuf_policy,
@@ -586,6 +596,11 @@ int sctp_sysctl_net_register(struct net *net)
for (i = 0; table[i].data; i++)
table[i].data += (char *)(&net->sctp) - (char *)&init_net.sctp;
+ table[SCTP_RTO_MIN_IDX].extra2 = &net->sctp.rto_max;
+ table[SCTP_RTO_MAX_IDX].extra1 = &net->sctp.rto_min;
+ table[SCTP_PF_RETRANS_IDX].extra2 = &net->sctp.ps_retrans;
+ table[SCTP_PS_RETRANS_IDX].extra1 = &net->sctp.pf_retrans;
+
net->sctp.sysctl_header = register_net_sysctl(net, "net/sctp", table);
if (net->sctp.sysctl_header == NULL) {
kfree(table);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 346/731] Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMS
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (344 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 345/731] sctp: sysctl: make extra pointers netns aware Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 347/731] Bluetooth: btintel: Fix missing free skb in btintel_setup_combined() Greg Kroah-Hartman
` (395 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Inga Stotland,
Luiz Augusto von Dentz, Sasha Levin
From: Inga Stotland <inga.stotland@intel.com>
[ Upstream commit 3b1c7c00b8c22b3cb79532252c59eb0b287bb86d ]
When validating the parameter length for MGMT_OP_ADD_EXT_ADV_PARAMS
command, use the correct op code in error status report:
was MGMT_OP_ADD_ADVERTISING, changed to MGMT_OP_ADD_EXT_ADV_PARAMS.
Fixes: 12410572833a2 ("Bluetooth: Break add adv into two mgmt commands")
Signed-off-by: Inga Stotland <inga.stotland@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/mgmt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index f09f0a78eb7b..04000499f4a2 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -7971,7 +7971,7 @@ static int add_ext_adv_params(struct sock *sk, struct hci_dev *hdev,
* extra parameters we don't know about will be ignored in this request.
*/
if (data_len < MGMT_ADD_EXT_ADV_PARAMS_MIN_SIZE)
- return mgmt_cmd_status(sk, hdev->id, MGMT_OP_ADD_ADVERTISING,
+ return mgmt_cmd_status(sk, hdev->id, MGMT_OP_ADD_EXT_ADV_PARAMS,
MGMT_STATUS_INVALID_PARAMS);
flags = __le32_to_cpu(cp->flags);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 347/731] Bluetooth: btintel: Fix missing free skb in btintel_setup_combined()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (345 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 346/731] Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMS Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 348/731] Bluetooth: btusb: dont call kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
` (394 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wang ShaoBo, Tedd Ho-Jeong An,
Luiz Augusto von Dentz, Sasha Levin
From: Wang ShaoBo <bobo.shaobowang@huawei.com>
[ Upstream commit cee50ce899de415baf4da3ed38b7d4f13c3170d1 ]
skb allocated by __hci_cmd_sync would not be used whether in checking
for supported iBT hardware variants or after, we should free it in all
error branches, this patch makes the case read version failed or default
error case free skb before return.
Fixes: c86c7285bb08 ("Bluetooth: btintel: Fix the legacy bootloader returns tlv based version")
Fixes: 019a1caa7fd2 ("Bluetooth: btintel: Refactoring setup routine for bootloader devices")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btintel.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index de3d851d85e7..d707aa63e944 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -2353,7 +2353,7 @@ static int btintel_setup_combined(struct hci_dev *hdev)
*/
err = btintel_read_version(hdev, &ver);
if (err)
- return err;
+ break;
/* Apply the device specific HCI quirks
*
@@ -2394,7 +2394,8 @@ static int btintel_setup_combined(struct hci_dev *hdev)
default:
bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
INTEL_HW_VARIANT(ver_tlv.cnvi_bt));
- return -EINVAL;
+ err = -EINVAL;
+ break;
}
exit_error:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 348/731] Bluetooth: btusb: dont call kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (346 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 347/731] Bluetooth: btintel: Fix missing free skb in btintel_setup_combined() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 349/731] Bluetooth: hci_qca: " Greg Kroah-Hartman
` (393 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang,
Luiz Augusto von Dentz, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit b15a6bd3c80c77faec8317319b97f976b1a08332 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 803b58367ffb ("Bluetooth: btusb: Implement driver internal packet reassembly")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btusb.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 69380cb03dd3..9c32263f872b 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -735,13 +735,13 @@ static inline void btusb_free_frags(struct btusb_data *data)
spin_lock_irqsave(&data->rxlock, flags);
- kfree_skb(data->evt_skb);
+ dev_kfree_skb_irq(data->evt_skb);
data->evt_skb = NULL;
- kfree_skb(data->acl_skb);
+ dev_kfree_skb_irq(data->acl_skb);
data->acl_skb = NULL;
- kfree_skb(data->sco_skb);
+ dev_kfree_skb_irq(data->sco_skb);
data->sco_skb = NULL;
spin_unlock_irqrestore(&data->rxlock, flags);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 349/731] Bluetooth: hci_qca: dont call kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (347 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 348/731] Bluetooth: btusb: dont call kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 350/731] Bluetooth: hci_ll: " Greg Kroah-Hartman
` (392 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang,
Luiz Augusto von Dentz, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit df4cfc91208e0a98f078223793f5871b1a82cc54 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 0ff252c1976d ("Bluetooth: hciuart: Add support QCA chipset for UART")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/hci_qca.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index ed91af4319b5..5d0428fc854f 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -912,7 +912,7 @@ static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
default:
BT_ERR("Illegal tx state: %d (losing packet)",
qca->tx_ibs_state);
- kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
break;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 350/731] Bluetooth: hci_ll: dont call kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (348 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 349/731] Bluetooth: hci_qca: " Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 351/731] Bluetooth: hci_h5: " Greg Kroah-Hartman
` (391 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang,
Luiz Augusto von Dentz, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 8f458f783dfbb19c1f1cb58ed06eeb701f52091b ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 166d2f6a4332 ("[Bluetooth] Add UART driver for Texas Instruments' BRF63xx chips")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/hci_ll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
index eb1e736efeeb..e4e5b26e2c33 100644
--- a/drivers/bluetooth/hci_ll.c
+++ b/drivers/bluetooth/hci_ll.c
@@ -345,7 +345,7 @@ static int ll_enqueue(struct hci_uart *hu, struct sk_buff *skb)
default:
BT_ERR("illegal hcill state: %ld (losing packet)",
ll->hcill_state);
- kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
break;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 351/731] Bluetooth: hci_h5: dont call kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (349 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 350/731] Bluetooth: hci_ll: " Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 352/731] Bluetooth: hci_bcsp: " Greg Kroah-Hartman
` (390 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang,
Luiz Augusto von Dentz, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 383630cc6758d619874c2e8bb2f68a61f3f9ef6e ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 43eb12d78960 ("Bluetooth: Fix/implement Three-wire reliable packet sending")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/hci_h5.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index e0ea9d25bb39..1363b21c81b7 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -313,7 +313,7 @@ static void h5_pkt_cull(struct h5 *h5)
break;
__skb_unlink(skb, &h5->unack);
- kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
}
if (skb_queue_empty(&h5->unack))
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 352/731] Bluetooth: hci_bcsp: dont call kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (350 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 351/731] Bluetooth: hci_h5: " Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 353/731] Bluetooth: hci_core: " Greg Kroah-Hartman
` (389 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang,
Luiz Augusto von Dentz, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 7b503e339c1a80bf0051ec2d19c3bc777014ac61 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/hci_bcsp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index cf4a56095817..8055f63603f4 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -378,7 +378,7 @@ static void bcsp_pkt_cull(struct bcsp_struct *bcsp)
i++;
__skb_unlink(skb, &bcsp->unack);
- kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
}
if (skb_queue_empty(&bcsp->unack))
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 353/731] Bluetooth: hci_core: dont call kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (351 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 352/731] Bluetooth: hci_bcsp: " Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 354/731] Bluetooth: RFCOMM: " Greg Kroah-Hartman
` (388 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang,
Luiz Augusto von Dentz, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 39c1eb6fcbae8ce9bb71b2ac5cb609355a2b181b ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 9238f36a5a50 ("Bluetooth: Add request cmd_complete and cmd_status functions")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/hci_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index bb84ff5fb98a..a41b4dcf1a7a 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -5101,7 +5101,7 @@ void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status,
*req_complete_skb = bt_cb(skb)->hci.req_complete_skb;
else
*req_complete = bt_cb(skb)->hci.req_complete;
- kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
}
spin_unlock_irqrestore(&hdev->cmd_q.lock, flags);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 354/731] Bluetooth: RFCOMM: dont call kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (352 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 353/731] Bluetooth: hci_core: " Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 355/731] stmmac: fix potential division by 0 Greg Kroah-Hartman
` (387 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang,
Luiz Augusto von Dentz, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 0ba18967d4544955b2eff2fbc4f2a8750c4df90a ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 81be03e026dc ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/rfcomm/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 7324764384b6..8d6fce9005bd 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -590,7 +590,7 @@ int rfcomm_dlc_send(struct rfcomm_dlc *d, struct sk_buff *skb)
ret = rfcomm_dlc_send_frag(d, frag);
if (ret < 0) {
- kfree_skb(frag);
+ dev_kfree_skb_irq(frag);
goto unlock;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 355/731] stmmac: fix potential division by 0
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (353 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 354/731] Bluetooth: RFCOMM: " Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 356/731] i40e: Fix the inability to attach XDP program on downed interface Greg Kroah-Hartman
` (386 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Piergiorgio Beruto, Andrew Lunn,
Jakub Kicinski, Sasha Levin
From: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
[ Upstream commit ede5a389852d3640a28e7187fb32b7f204380901 ]
When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived
from the MAC reference clock (default), the clk_ptp_rate becomes too
small and the calculated sub second increment becomes 0 when computed by
the stmmac_config_sub_second_increment() function within
stmmac_init_tstamp_counter().
Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter()
operation triggers a divide by 0 exception as shown below.
[ 95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49)
[ 95.095964] dwmac1000: Master AXI performs any burst length
[ 95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found
[ 95.109428] Division by zero in kernel.
[ 95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77
[ 95.123686] Hardware name: Altera SOCFPGA
[ 95.127695] unwind_backtrace from show_stack+0x10/0x14
[ 95.132938] show_stack from dump_stack_lvl+0x40/0x4c
[ 95.137992] dump_stack_lvl from Ldiv0+0x8/0x10
[ 95.142527] Ldiv0 from __aeabi_uidivmod+0x8/0x18
[ 95.147232] __aeabi_uidivmod from div_u64_rem+0x1c/0x40
[ 95.152552] div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164
[ 95.158826] stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00
[ 95.165533] stmmac_hw_setup from __stmmac_open+0x214/0x2d4
[ 95.171117] __stmmac_open from stmmac_open+0x30/0x44
[ 95.176182] stmmac_open from __dev_open+0x11c/0x134
[ 95.181172] __dev_open from __dev_change_flags+0x168/0x17c
[ 95.186750] __dev_change_flags from dev_change_flags+0x14/0x50
[ 95.192662] dev_change_flags from devinet_ioctl+0x2b4/0x604
[ 95.198321] devinet_ioctl from inet_ioctl+0x1ec/0x214
[ 95.203462] inet_ioctl from sock_ioctl+0x14c/0x3c4
[ 95.208354] sock_ioctl from vfs_ioctl+0x20/0x38
[ 95.212984] vfs_ioctl from sys_ioctl+0x250/0x844
[ 95.217691] sys_ioctl from ret_fast_syscall+0x0/0x4c
[ 95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0)
[ 95.227790] 1fa0: 00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50
[ 95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000
[ 95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Fixes: 91a2559c1dc5 ("net: stmmac: Fix sub-second increment")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 3 ++-
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
index d68ef72dcdde..4538e4fd8189 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -47,7 +47,8 @@ static void config_sub_second_increment(void __iomem *ioaddr,
if (!(value & PTP_TCR_TSCTRLSSR))
data = (data * 1000) / 465;
- data &= PTP_SSIR_SSINC_MASK;
+ if (data > PTP_SSIR_SSINC_MAX)
+ data = PTP_SSIR_SSINC_MAX;
reg_value = data;
if (gmac4)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h
index 53172a439810..bf619295d079 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h
@@ -64,7 +64,7 @@
#define PTP_TCR_TSENMACADDR BIT(18)
/* SSIR defines */
-#define PTP_SSIR_SSINC_MASK 0xff
+#define PTP_SSIR_SSINC_MAX 0xff
#define GMAC4_PTP_SSIR_SSINC_SHIFT 16
/* Auxiliary Control defines */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 356/731] i40e: Fix the inability to attach XDP program on downed interface
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (354 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 355/731] stmmac: fix potential division by 0 Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 357/731] net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path Greg Kroah-Hartman
` (385 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bartosz Staszewski,
Mateusz Palczewski, Shwetha Nagaraju, Maciej Fijalkowski,
Tony Nguyen, Saeed Mahameed, Jakub Kicinski, Sasha Levin
From: Bartosz Staszewski <bartoszx.staszewski@intel.com>
[ Upstream commit 0c87b545a2ed5cd8a6318011f1c92b188c2d74bc ]
Whenever trying to load XDP prog on downed interface, function i40e_xdp
was passing vsi->rx_buf_len field to i40e_xdp_setup() which was equal 0.
i40e_open() calls i40e_vsi_configure_rx() which configures that field,
but that only happens when interface is up. When it is down, i40e_open()
is not being called, thus vsi->rx_buf_len is not set.
Solution for this is calculate buffer length in newly created
function - i40e_calculate_vsi_rx_buf_len() that return actual buffer
length. Buffer length is being calculated based on the same rules
applied previously in i40e_vsi_configure_rx() function.
Fixes: 613142b0bb88 ("i40e: Log error for oversized MTU on device")
Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions")
Signed-off-by: Bartosz Staszewski <bartoszx.staszewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.com>
Link: https://lore.kernel.org/r/20221209185411.2519898-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 36 ++++++++++++++-------
1 file changed, 24 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index ed2c961902b6..c013d86559af 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3548,6 +3548,24 @@ static int i40e_vsi_configure_tx(struct i40e_vsi *vsi)
return err;
}
+/**
+ * i40e_calculate_vsi_rx_buf_len - Calculates buffer length
+ *
+ * @vsi: VSI to calculate rx_buf_len from
+ */
+static u16 i40e_calculate_vsi_rx_buf_len(struct i40e_vsi *vsi)
+{
+ if (!vsi->netdev || (vsi->back->flags & I40E_FLAG_LEGACY_RX))
+ return I40E_RXBUFFER_2048;
+
+#if (PAGE_SIZE < 8192)
+ if (!I40E_2K_TOO_SMALL_WITH_PADDING && vsi->netdev->mtu <= ETH_DATA_LEN)
+ return I40E_RXBUFFER_1536 - NET_IP_ALIGN;
+#endif
+
+ return PAGE_SIZE < 8192 ? I40E_RXBUFFER_3072 : I40E_RXBUFFER_2048;
+}
+
/**
* i40e_vsi_configure_rx - Configure the VSI for Rx
* @vsi: the VSI being configured
@@ -3559,20 +3577,14 @@ static int i40e_vsi_configure_rx(struct i40e_vsi *vsi)
int err = 0;
u16 i;
- if (!vsi->netdev || (vsi->back->flags & I40E_FLAG_LEGACY_RX)) {
- vsi->max_frame = I40E_MAX_RXBUFFER;
- vsi->rx_buf_len = I40E_RXBUFFER_2048;
+ vsi->max_frame = I40E_MAX_RXBUFFER;
+ vsi->rx_buf_len = i40e_calculate_vsi_rx_buf_len(vsi);
+
#if (PAGE_SIZE < 8192)
- } else if (!I40E_2K_TOO_SMALL_WITH_PADDING &&
- (vsi->netdev->mtu <= ETH_DATA_LEN)) {
+ if (vsi->netdev && !I40E_2K_TOO_SMALL_WITH_PADDING &&
+ vsi->netdev->mtu <= ETH_DATA_LEN)
vsi->max_frame = I40E_RXBUFFER_1536 - NET_IP_ALIGN;
- vsi->rx_buf_len = I40E_RXBUFFER_1536 - NET_IP_ALIGN;
#endif
- } else {
- vsi->max_frame = I40E_MAX_RXBUFFER;
- vsi->rx_buf_len = (PAGE_SIZE < 8192) ? I40E_RXBUFFER_3072 :
- I40E_RXBUFFER_2048;
- }
/* set up individual rings */
for (i = 0; i < vsi->num_queue_pairs && !err; i++)
@@ -13147,7 +13159,7 @@ static int i40e_xdp_setup(struct i40e_vsi *vsi, struct bpf_prog *prog,
int i;
/* Don't allow frames that span over multiple buffers */
- if (frame_size > vsi->rx_buf_len) {
+ if (frame_size > i40e_calculate_vsi_rx_buf_len(vsi)) {
NL_SET_ERR_MSG_MOD(extack, "MTU too large to enable XDP");
return -EINVAL;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 357/731] net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (355 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 356/731] i40e: Fix the inability to attach XDP program on downed interface Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 358/731] apparmor: fix a memleak in multi_transaction_new() Greg Kroah-Hartman
` (384 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vladimir Oltean, Jakub Kicinski,
Sasha Levin
From: Vladimir Oltean <vladimir.oltean@nxp.com>
[ Upstream commit e095493091e850d5292ad01d8fbf5cde1d89ac53 ]
If dsa_tag_8021q_setup() fails, for example due to the inability of the
device to install a VLAN, the tag_8021q context of the switch will leak.
Make sure it is freed on the error path.
Fixes: 328621f6131f ("net: dsa: tag_8021q: absorb dsa_8021q_setup into dsa_tag_8021q_{,un}register")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221209235242.480344-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/dsa/tag_8021q.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c
index f8f7b7c34e7d..e443088ab0f6 100644
--- a/net/dsa/tag_8021q.c
+++ b/net/dsa/tag_8021q.c
@@ -529,6 +529,7 @@ static void dsa_tag_8021q_teardown(struct dsa_switch *ds)
int dsa_tag_8021q_register(struct dsa_switch *ds, __be16 proto)
{
struct dsa_8021q_context *ctx;
+ int err;
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx)
@@ -541,7 +542,15 @@ int dsa_tag_8021q_register(struct dsa_switch *ds, __be16 proto)
ds->tag_8021q_ctx = ctx;
- return dsa_tag_8021q_setup(ds);
+ err = dsa_tag_8021q_setup(ds);
+ if (err)
+ goto err_free;
+
+ return 0;
+
+err_free:
+ kfree(ctx);
+ return err;
}
EXPORT_SYMBOL_GPL(dsa_tag_8021q_register);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 358/731] apparmor: fix a memleak in multi_transaction_new()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (356 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 357/731] net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 359/731] apparmor: fix lockdep warning when removing a namespace Greg Kroah-Hartman
` (383 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, John Johansen, Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit c73275cf6834787ca090317f1d20dbfa3b7f05aa ]
In multi_transaction_new(), the variable t is not freed or passed out
on the failure of copy_from_user(t->data, buf, size), which could lead
to a memleak.
Fix this bug by adding a put_multi_transaction(t) in the error path.
Fixes: 1dea3b41e84c5 ("apparmor: speed up transactional queries")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/apparmor/apparmorfs.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/security/apparmor/apparmorfs.c b/security/apparmor/apparmorfs.c
index a891705b1d57..8c7719108d7f 100644
--- a/security/apparmor/apparmorfs.c
+++ b/security/apparmor/apparmorfs.c
@@ -867,8 +867,10 @@ static struct multi_transaction *multi_transaction_new(struct file *file,
if (!t)
return ERR_PTR(-ENOMEM);
kref_init(&t->count);
- if (copy_from_user(t->data, buf, size))
+ if (copy_from_user(t->data, buf, size)) {
+ put_multi_transaction(t);
return ERR_PTR(-EFAULT);
+ }
return t;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 359/731] apparmor: fix lockdep warning when removing a namespace
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (357 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 358/731] apparmor: fix a memleak in multi_transaction_new() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 360/731] apparmor: Fix abi check to include v8 abi Greg Kroah-Hartman
` (382 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, John Johansen, Sasha Levin
From: John Johansen <john.johansen@canonical.com>
[ Upstream commit 9c4557efc558a68e4cd973490fd936d6e3414db8 ]
Fix the following lockdep warning
[ 1119.158984] ============================================
[ 1119.158988] WARNING: possible recursive locking detected
[ 1119.158996] 6.0.0-rc1+ #257 Tainted: G E N
[ 1119.158999] --------------------------------------------
[ 1119.159001] bash/80100 is trying to acquire lock:
[ 1119.159007] ffff88803e79b4a0 (&ns->lock/1){+.+.}-{4:4}, at: destroy_ns.part.0+0x43/0x140
[ 1119.159028]
but task is already holding lock:
[ 1119.159030] ffff8881009764a0 (&ns->lock/1){+.+.}-{4:4}, at: aa_remove_profiles+0x3f0/0x640
[ 1119.159040]
other info that might help us debug this:
[ 1119.159042] Possible unsafe locking scenario:
[ 1119.159043] CPU0
[ 1119.159045] ----
[ 1119.159047] lock(&ns->lock/1);
[ 1119.159051] lock(&ns->lock/1);
[ 1119.159055]
*** DEADLOCK ***
Which is caused by an incorrect lockdep nesting notation
Fixes: feb3c766a3ab ("apparmor: fix possible recursive lock warning in __aa_create_ns")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/apparmor/policy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/security/apparmor/policy.c b/security/apparmor/policy.c
index 4c010c9a6af1..fcf22577f606 100644
--- a/security/apparmor/policy.c
+++ b/security/apparmor/policy.c
@@ -1125,7 +1125,7 @@ ssize_t aa_remove_profiles(struct aa_ns *policy_ns, struct aa_label *subj,
if (!name) {
/* remove namespace - can only happen if fqname[0] == ':' */
- mutex_lock_nested(&ns->parent->lock, ns->level);
+ mutex_lock_nested(&ns->parent->lock, ns->parent->level);
__aa_bump_ns_revision(ns);
__aa_remove_ns(ns);
mutex_unlock(&ns->parent->lock);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 360/731] apparmor: Fix abi check to include v8 abi
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (358 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 359/731] apparmor: fix lockdep warning when removing a namespace Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 361/731] crypto: hisilicon/qm - fix missing destroy qp_idr Greg Kroah-Hartman
` (381 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, John Johansen, Sasha Levin
From: John Johansen <john.johansen@canonical.com>
[ Upstream commit 1b5a6198f5a9d0aa5497da0dc4bcd4fc166ee516 ]
The v8 abi is supported by the kernel but the userspace supported
version check does not allow for it. This was missed when v8 was added
due to a bug in the userspace compiler which was setting an older abi
version for v8 encoding (which is forward compatible except on the
network encoding). However it is possible to detect the network
encoding by checking the policydb network support which the code
does. The end result was that missing the abi flag worked until
userspace was fixed and began correctly checking for the v8 abi
version.
Fixes: 56974a6fcfef ("apparmor: add base infastructure for socket mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/apparmor/policy_unpack.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/security/apparmor/policy_unpack.c b/security/apparmor/policy_unpack.c
index 03c9609ca407..d5b3a062d1d1 100644
--- a/security/apparmor/policy_unpack.c
+++ b/security/apparmor/policy_unpack.c
@@ -964,7 +964,7 @@ static int verify_header(struct aa_ext *e, int required, const char **ns)
* if not specified use previous version
* Mask off everything that is not kernel abi version
*/
- if (VERSION_LT(e->version, v5) || VERSION_GT(e->version, v7)) {
+ if (VERSION_LT(e->version, v5) || VERSION_GT(e->version, v8)) {
audit_iface(NULL, NULL, NULL, "unsupported interface version",
e, error);
return error;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 361/731] crypto: hisilicon/qm - fix missing destroy qp_idr
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (359 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 360/731] apparmor: Fix abi check to include v8 abi Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 362/731] crypto: sun8i-ss - use dma_addr instead u32 Greg Kroah-Hartman
` (380 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Weili Qian, Yang Shen, Herbert Xu,
Sasha Levin
From: Weili Qian <qianweili@huawei.com>
[ Upstream commit 116be08f6e4e385733d42360a33c3d883d2dd702 ]
In the function hisi_qm_memory_init(), if resource alloc fails after
idr_init, the initialized qp_idr needs to be destroyed.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/hisilicon/qm.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index b8900a5dbf6e..fd89918abd19 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -5727,8 +5727,8 @@ static int hisi_qm_memory_init(struct hisi_qm *qm)
GFP_ATOMIC);
dev_dbg(dev, "allocate qm dma buf size=%zx)\n", qm->qdma.size);
if (!qm->qdma.va) {
- ret = -ENOMEM;
- goto err_alloc_qdma;
+ ret = -ENOMEM;
+ goto err_destroy_idr;
}
QM_INIT_BUF(qm, eqe, QM_EQ_DEPTH);
@@ -5744,7 +5744,8 @@ static int hisi_qm_memory_init(struct hisi_qm *qm)
err_alloc_qp_array:
dma_free_coherent(dev, qm->qdma.size, qm->qdma.va, qm->qdma.dma);
-err_alloc_qdma:
+err_destroy_idr:
+ idr_destroy(&qm->qp_idr);
kfree(qm->factor);
return ret;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 362/731] crypto: sun8i-ss - use dma_addr instead u32
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (360 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 361/731] crypto: hisilicon/qm - fix missing destroy qp_idr Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 363/731] crypto: nitrox - avoid double free on error path in nitrox_sriov_init() Greg Kroah-Hartman
` (379 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dan Carpenter, Corentin Labbe,
Herbert Xu, Sasha Levin
From: Corentin Labbe <clabbe@baylibre.com>
[ Upstream commit 839b8ae2fc10f205317bcc32c9de18456756e1f5 ]
The DMA address need to be stored in a dma_addr_t
Fixes: 359e893e8af4 ("crypto: sun8i-ss - rework handling of IV")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c
index 3c46ad8c3a1c..005eefecfdf5 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c
@@ -105,7 +105,7 @@ static int sun8i_ss_setup_ivs(struct skcipher_request *areq)
unsigned int ivsize = crypto_skcipher_ivsize(tfm);
struct sun8i_ss_flow *sf = &ss->flows[rctx->flow];
int i = 0;
- u32 a;
+ dma_addr_t a;
int err;
rctx->ivlen = ivsize;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 363/731] crypto: nitrox - avoid double free on error path in nitrox_sriov_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (361 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 362/731] crypto: sun8i-ss - use dma_addr instead u32 Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 364/731] scsi: core: Fix a race between scsi_done() and scsi_timeout() Greg Kroah-Hartman
` (378 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Natalia Petrova, Alexey Khoroshilov,
Herbert Xu, Sasha Levin
From: Natalia Petrova <n.petrova@fintech.ru>
[ Upstream commit 094528b6a5a755b1195a01e10b13597d67d1a0e6 ]
If alloc_workqueue() fails in nitrox_mbox_init() it deallocates
ndev->iov.vfdev and returns error code, but then nitrox_sriov_init()
calls nitrox_sriov_cleanup() where ndev->iov.vfdev is deallocated
again.
Fix this by nulling ndev->iov.vfdev after the first deallocation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9e5de3e06e54 ("crypto: cavium/nitrox - Add mailbox...")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/cavium/nitrox/nitrox_mbx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/crypto/cavium/nitrox/nitrox_mbx.c b/drivers/crypto/cavium/nitrox/nitrox_mbx.c
index 2e9c0d214363..199fcec9b8d0 100644
--- a/drivers/crypto/cavium/nitrox/nitrox_mbx.c
+++ b/drivers/crypto/cavium/nitrox/nitrox_mbx.c
@@ -191,6 +191,7 @@ int nitrox_mbox_init(struct nitrox_device *ndev)
ndev->iov.pf2vf_wq = alloc_workqueue("nitrox_pf2vf", 0, 0);
if (!ndev->iov.pf2vf_wq) {
kfree(ndev->iov.vfdev);
+ ndev->iov.vfdev = NULL;
return -ENOMEM;
}
/* enable pf2vf mailbox interrupts */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 364/731] scsi: core: Fix a race between scsi_done() and scsi_timeout()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (362 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 363/731] crypto: nitrox - avoid double free on error path in nitrox_sriov_init() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 365/731] apparmor: Use pointer to struct aa_label for lbs_cred Greg Kroah-Hartman
` (377 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mike Christie, Keith Busch,
Christoph Hellwig, Ming Lei, John Garry, Hannes Reinecke,
Adrian Hunter, Bart Van Assche, Martin K. Petersen, Sasha Levin
From: Bart Van Assche <bvanassche@acm.org>
[ Upstream commit 978b7922d3dca672b41bb4b8ce6c06ab77112741 ]
If there is a race between scsi_done() and scsi_timeout() and if
scsi_timeout() loses the race, scsi_timeout() should not reset the request
timer. Hence change the return value for this case from BLK_EH_RESET_TIMER
into BLK_EH_DONE.
Although the block layer holds a reference on a request (req->ref) while
calling a timeout handler, restarting the timer (blk_add_timer()) while a
request is being completed is racy.
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_error.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index bb5a6e0fa49a..dd9f5778f687 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -343,19 +343,11 @@ enum blk_eh_timer_return scsi_times_out(struct request *req)
if (rtn == BLK_EH_DONE) {
/*
- * Set the command to complete first in order to prevent a real
- * completion from releasing the command while error handling
- * is using it. If the command was already completed, then the
- * lower level driver beat the timeout handler, and it is safe
- * to return without escalating error recovery.
- *
- * If timeout handling lost the race to a real completion, the
- * block layer may ignore that due to a fake timeout injection,
- * so return RESET_TIMER to allow error handling another shot
- * at this command.
+ * If scsi_done() has already set SCMD_STATE_COMPLETE, do not
+ * modify *scmd.
*/
if (test_and_set_bit(SCMD_STATE_COMPLETE, &scmd->state))
- return BLK_EH_RESET_TIMER;
+ return BLK_EH_DONE;
if (scsi_abort_command(scmd) != SUCCESS) {
set_host_byte(scmd, DID_TIME_OUT);
scsi_eh_scmd_add(scmd);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 365/731] apparmor: Use pointer to struct aa_label for lbs_cred
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (363 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 364/731] scsi: core: Fix a race between scsi_done() and scsi_timeout() Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 366/731] PCI: dwc: Fix n_fts[] array overrun Greg Kroah-Hartman
` (376 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiu Jianfeng, John Johansen, Sasha Levin
From: Xiu Jianfeng <xiujianfeng@huawei.com>
[ Upstream commit 37923d4321b1e38170086da2c117f78f2b0f49c6 ]
According to the implementations of cred_label() and set_cred_label(),
we should use pointer to struct aa_label for lbs_cred instead of struct
aa_task_ctx, this patch fixes it.
Fixes: bbd3662a8348 ("Infrastructure management of the cred security blob")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/apparmor/lsm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
index f72406fe1bf2..10274eb90fa3 100644
--- a/security/apparmor/lsm.c
+++ b/security/apparmor/lsm.c
@@ -1170,10 +1170,10 @@ static int apparmor_inet_conn_request(const struct sock *sk, struct sk_buff *skb
#endif
/*
- * The cred blob is a pointer to, not an instance of, an aa_task_ctx.
+ * The cred blob is a pointer to, not an instance of, an aa_label.
*/
struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
- .lbs_cred = sizeof(struct aa_task_ctx *),
+ .lbs_cred = sizeof(struct aa_label *),
.lbs_file = sizeof(struct aa_file_ctx),
.lbs_task = sizeof(struct aa_task_ctx),
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 366/731] PCI: dwc: Fix n_fts[] array overrun
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (364 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 365/731] apparmor: Use pointer to struct aa_label for lbs_cred Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 367/731] RDMA/core: Fix order of nldev_exit call Greg Kroah-Hartman
` (375 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vidya Sagar, Lorenzo Pieralisi,
Rob Herring, Jingoo Han, Sasha Levin
From: Vidya Sagar <vidyas@nvidia.com>
[ Upstream commit 66110361281b2f7da0c8bd51eaf1f152f4236035 ]
commit aeaa0bfe89654 ("PCI: dwc: Move N_FTS setup to common setup")
incorrectly uses pci->link_gen in deriving the index to the
n_fts[] array also introducing the issue of accessing beyond the
boundaries of array for greater than Gen-2 speeds. This change fixes
that issue.
Link: https://lore.kernel.org/r/20220926111923.22487-1-vidyas@nvidia.com
Fixes: aeaa0bfe8965 ("PCI: dwc: Move N_FTS setup to common setup")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/controller/dwc/pcie-designware.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index e408ebf5bd73..00972a7bc976 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -730,7 +730,7 @@ void dw_pcie_setup(struct dw_pcie *pci)
if (pci->n_fts[1]) {
val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
val &= ~PORT_LOGIC_N_FTS_MASK;
- val |= pci->n_fts[pci->link_gen - 1];
+ val |= pci->n_fts[1];
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 367/731] RDMA/core: Fix order of nldev_exit call
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (365 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 366/731] PCI: dwc: Fix n_fts[] array overrun Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 368/731] PCI: pci-epf-test: Register notifier if only core_init_notifier is enabled Greg Kroah-Hartman
` (374 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Leon Romanovsky, Leon Romanovsky,
Sasha Levin
From: Leon Romanovsky <leonro@nvidia.com>
[ Upstream commit 4508d32ccced24c972bc4592104513e1ff8439b5 ]
Create symmetrical exit flow by calling to nldev_exit() after
call to rdma_nl_unregister(RDMA_NL_LS).
Fixes: 6c80b41abe22 ("RDMA/netlink: Add nldev initialization flows")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/64e676774a53a406f4cde265d5a4cfd6b8e97df9.1666683334.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/core/device.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index 1519379b116e..ab2106a09f9c 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -2848,8 +2848,8 @@ static int __init ib_core_init(void)
static void __exit ib_core_cleanup(void)
{
roce_gid_mgmt_cleanup();
- nldev_exit();
rdma_nl_unregister(RDMA_NL_LS);
+ nldev_exit();
unregister_pernet_device(&rdma_dev_net_ops);
unregister_blocking_lsm_notifier(&ibdev_lsm_nb);
ib_sa_cleanup();
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 368/731] PCI: pci-epf-test: Register notifier if only core_init_notifier is enabled
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (366 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 367/731] RDMA/core: Fix order of nldev_exit call Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 369/731] f2fs: Fix the race condition of resize flag between resizefs Greg Kroah-Hartman
` (373 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kunihiko Hayashi, Lorenzo Pieralisi,
Om Prakash Singh, Kishon Vijay Abraham I, Sasha Levin
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
[ Upstream commit 6acd25cc98ce0c9ee4fefdaf44fc8bca534b26e5 ]
The pci_epf_test_notifier function should be installed also if only
core_init_notifier is enabled. Fix the current logic.
Link: https://lore.kernel.org/r/20220825090101.20474-1-hayashi.kunihiko@socionext.com
Fixes: 5e50ee27d4a5 ("PCI: pci-epf-test: Add support to defer core initialization")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Om Prakash Singh <omp@nvidia.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/endpoint/functions/pci-epf-test.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index a5ed779b0a51..45535d4ae644 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -883,7 +883,7 @@ static int pci_epf_test_bind(struct pci_epf *epf)
if (ret)
epf_test->dma_supported = false;
- if (linkup_notifier) {
+ if (linkup_notifier || core_init_notifier) {
epf->nb.notifier_call = pci_epf_test_notifier;
pci_epc_register_notifier(epc, &epf->nb);
} else {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 369/731] f2fs: Fix the race condition of resize flag between resizefs
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (367 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 368/731] PCI: pci-epf-test: Register notifier if only core_init_notifier is enabled Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 370/731] crypto: rockchip - do not do custom power management Greg Kroah-Hartman
` (372 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Xiaoxu, Zhang Qilong, Chao Yu,
Jaegeuk Kim, Sasha Levin
From: Zhang Qilong <zhangqilong3@huawei.com>
[ Upstream commit 28fc4e9077ce59ab28c89c20dc6be5154473218f ]
Because the set/clear SBI_IS_RESIZEFS flag not between any locks,
In the following case:
thread1 thread2
->ioctl(resizefs)
->set RESIZEFS flag ->ioctl(resizefs)
... ->set RESIZEFS flag
->clear RESIZEFS flag
->resizefs stream
# No RESIZEFS flag in the stream
Also before freeze_super, the resizefs not started, we should not set
the SBI_IS_RESIZEFS flag.
So move the set/clear SBI_IS_RESIZEFS flag between the cp_mutex and
gc_lock.
Fixes: b4b10061ef98 ("f2fs: refactor resize_fs to avoid meta updates in progress")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/f2fs/gc.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index e75a276f5b9c..4cbaa6ab083f 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -2051,8 +2051,6 @@ int f2fs_resize_fs(struct f2fs_sb_info *sbi, __u64 block_count)
if (err)
return err;
- set_sbi_flag(sbi, SBI_IS_RESIZEFS);
-
freeze_super(sbi->sb);
down_write(&sbi->gc_lock);
down_write(&sbi->cp_global_sem);
@@ -2068,6 +2066,7 @@ int f2fs_resize_fs(struct f2fs_sb_info *sbi, __u64 block_count)
if (err)
goto out_err;
+ set_sbi_flag(sbi, SBI_IS_RESIZEFS);
err = free_segment_range(sbi, secs, false);
if (err)
goto recover_out;
@@ -2091,6 +2090,7 @@ int f2fs_resize_fs(struct f2fs_sb_info *sbi, __u64 block_count)
f2fs_commit_super(sbi, false);
}
recover_out:
+ clear_sbi_flag(sbi, SBI_IS_RESIZEFS);
if (err) {
set_sbi_flag(sbi, SBI_NEED_FSCK);
f2fs_err(sbi, "resize_fs failed, should run fsck to repair!");
@@ -2103,6 +2103,5 @@ int f2fs_resize_fs(struct f2fs_sb_info *sbi, __u64 block_count)
up_write(&sbi->cp_global_sem);
up_write(&sbi->gc_lock);
thaw_super(sbi->sb);
- clear_sbi_flag(sbi, SBI_IS_RESIZEFS);
return err;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 370/731] crypto: rockchip - do not do custom power management
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (368 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 369/731] f2fs: Fix the race condition of resize flag between resizefs Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 371/731] crypto: rockchip - do not store mode globally Greg Kroah-Hartman
` (371 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Keeping, Corentin Labbe,
Herbert Xu, Sasha Levin
From: Corentin Labbe <clabbe@baylibre.com>
[ Upstream commit c50ef1411c8cbad0c7db100c477126076b6e3348 ]
The clock enable/disable at tfm init/exit is fragile,
if 2 tfm are init in the same time and one is removed just after,
it will leave the hardware uncloked even if a user remains.
Instead simply enable clocks at probe time.
We will do PM later.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/rockchip/rk3288_crypto.c | 4 ++--
drivers/crypto/rockchip/rk3288_crypto.h | 2 --
drivers/crypto/rockchip/rk3288_crypto_ahash.c | 3 +--
drivers/crypto/rockchip/rk3288_crypto_skcipher.c | 5 +++--
4 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/crypto/rockchip/rk3288_crypto.c b/drivers/crypto/rockchip/rk3288_crypto.c
index 35d73061d156..5f8444b9633a 100644
--- a/drivers/crypto/rockchip/rk3288_crypto.c
+++ b/drivers/crypto/rockchip/rk3288_crypto.c
@@ -395,8 +395,7 @@ static int rk_crypto_probe(struct platform_device *pdev)
rk_crypto_done_task_cb, (unsigned long)crypto_info);
crypto_init_queue(&crypto_info->queue, 50);
- crypto_info->enable_clk = rk_crypto_enable_clk;
- crypto_info->disable_clk = rk_crypto_disable_clk;
+ rk_crypto_enable_clk(crypto_info);
crypto_info->load_data = rk_load_data;
crypto_info->unload_data = rk_unload_data;
crypto_info->enqueue = rk_crypto_enqueue;
@@ -423,6 +422,7 @@ static int rk_crypto_remove(struct platform_device *pdev)
struct rk_crypto_info *crypto_tmp = platform_get_drvdata(pdev);
rk_crypto_unregister();
+ rk_crypto_disable_clk(crypto_tmp);
tasklet_kill(&crypto_tmp->done_task);
tasklet_kill(&crypto_tmp->queue_task);
return 0;
diff --git a/drivers/crypto/rockchip/rk3288_crypto.h b/drivers/crypto/rockchip/rk3288_crypto.h
index 97278c2574ff..2fa7131e4060 100644
--- a/drivers/crypto/rockchip/rk3288_crypto.h
+++ b/drivers/crypto/rockchip/rk3288_crypto.h
@@ -220,8 +220,6 @@ struct rk_crypto_info {
int (*start)(struct rk_crypto_info *dev);
int (*update)(struct rk_crypto_info *dev);
void (*complete)(struct crypto_async_request *base, int err);
- int (*enable_clk)(struct rk_crypto_info *dev);
- void (*disable_clk)(struct rk_crypto_info *dev);
int (*load_data)(struct rk_crypto_info *dev,
struct scatterlist *sg_src,
struct scatterlist *sg_dst);
diff --git a/drivers/crypto/rockchip/rk3288_crypto_ahash.c b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
index ed03058497bc..49017d1fb510 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_ahash.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
@@ -301,7 +301,7 @@ static int rk_cra_hash_init(struct crypto_tfm *tfm)
sizeof(struct rk_ahash_rctx) +
crypto_ahash_reqsize(tctx->fallback_tfm));
- return tctx->dev->enable_clk(tctx->dev);
+ return 0;
}
static void rk_cra_hash_exit(struct crypto_tfm *tfm)
@@ -309,7 +309,6 @@ static void rk_cra_hash_exit(struct crypto_tfm *tfm)
struct rk_ahash_ctx *tctx = crypto_tfm_ctx(tfm);
free_page((unsigned long)tctx->dev->addr_vir);
- return tctx->dev->disable_clk(tctx->dev);
}
struct rk_crypto_tmp rk_ahash_sha1 = {
diff --git a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
index 5bbf0d2722e1..8c44a19eab75 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
@@ -388,8 +388,10 @@ static int rk_ablk_init_tfm(struct crypto_skcipher *tfm)
ctx->dev->update = rk_ablk_rx;
ctx->dev->complete = rk_crypto_complete;
ctx->dev->addr_vir = (char *)__get_free_page(GFP_KERNEL);
+ if (!ctx->dev->addr_vir)
+ return -ENOMEM;
- return ctx->dev->addr_vir ? ctx->dev->enable_clk(ctx->dev) : -ENOMEM;
+ return 0;
}
static void rk_ablk_exit_tfm(struct crypto_skcipher *tfm)
@@ -397,7 +399,6 @@ static void rk_ablk_exit_tfm(struct crypto_skcipher *tfm)
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
free_page((unsigned long)ctx->dev->addr_vir);
- ctx->dev->disable_clk(ctx->dev);
}
struct rk_crypto_tmp rk_ecb_aes_alg = {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 371/731] crypto: rockchip - do not store mode globally
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (369 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 370/731] crypto: rockchip - do not do custom power management Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 372/731] crypto: rockchip - add fallback for cipher Greg Kroah-Hartman
` (370 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Keeping, Corentin Labbe,
Herbert Xu, Sasha Levin
From: Corentin Labbe <clabbe@baylibre.com>
[ Upstream commit 87e356c4966444866186f68f05832fdcc0f351a3 ]
Storing the mode globally does not work if 2 requests are handled in the
same time.
We should store it in a request context.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/rockchip/rk3288_crypto.h | 5 +-
.../crypto/rockchip/rk3288_crypto_skcipher.c | 58 ++++++++++++-------
2 files changed, 41 insertions(+), 22 deletions(-)
diff --git a/drivers/crypto/rockchip/rk3288_crypto.h b/drivers/crypto/rockchip/rk3288_crypto.h
index 2fa7131e4060..3e60e3dca1b5 100644
--- a/drivers/crypto/rockchip/rk3288_crypto.h
+++ b/drivers/crypto/rockchip/rk3288_crypto.h
@@ -245,10 +245,13 @@ struct rk_ahash_rctx {
struct rk_cipher_ctx {
struct rk_crypto_info *dev;
unsigned int keylen;
- u32 mode;
u8 iv[AES_BLOCK_SIZE];
};
+struct rk_cipher_rctx {
+ u32 mode;
+};
+
enum alg_type {
ALG_TYPE_HASH,
ALG_TYPE_CIPHER,
diff --git a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
index 8c44a19eab75..bbd0bf52bf07 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
@@ -76,9 +76,10 @@ static int rk_aes_ecb_encrypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_crypto_info *dev = ctx->dev;
- ctx->mode = RK_CRYPTO_AES_ECB_MODE;
+ rctx->mode = RK_CRYPTO_AES_ECB_MODE;
return rk_handle_req(dev, req);
}
@@ -86,9 +87,10 @@ static int rk_aes_ecb_decrypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_crypto_info *dev = ctx->dev;
- ctx->mode = RK_CRYPTO_AES_ECB_MODE | RK_CRYPTO_DEC;
+ rctx->mode = RK_CRYPTO_AES_ECB_MODE | RK_CRYPTO_DEC;
return rk_handle_req(dev, req);
}
@@ -96,9 +98,10 @@ static int rk_aes_cbc_encrypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_crypto_info *dev = ctx->dev;
- ctx->mode = RK_CRYPTO_AES_CBC_MODE;
+ rctx->mode = RK_CRYPTO_AES_CBC_MODE;
return rk_handle_req(dev, req);
}
@@ -106,9 +109,10 @@ static int rk_aes_cbc_decrypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_crypto_info *dev = ctx->dev;
- ctx->mode = RK_CRYPTO_AES_CBC_MODE | RK_CRYPTO_DEC;
+ rctx->mode = RK_CRYPTO_AES_CBC_MODE | RK_CRYPTO_DEC;
return rk_handle_req(dev, req);
}
@@ -116,9 +120,10 @@ static int rk_des_ecb_encrypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_crypto_info *dev = ctx->dev;
- ctx->mode = 0;
+ rctx->mode = 0;
return rk_handle_req(dev, req);
}
@@ -126,9 +131,10 @@ static int rk_des_ecb_decrypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_crypto_info *dev = ctx->dev;
- ctx->mode = RK_CRYPTO_DEC;
+ rctx->mode = RK_CRYPTO_DEC;
return rk_handle_req(dev, req);
}
@@ -136,9 +142,10 @@ static int rk_des_cbc_encrypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_crypto_info *dev = ctx->dev;
- ctx->mode = RK_CRYPTO_TDES_CHAINMODE_CBC;
+ rctx->mode = RK_CRYPTO_TDES_CHAINMODE_CBC;
return rk_handle_req(dev, req);
}
@@ -146,9 +153,10 @@ static int rk_des_cbc_decrypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_crypto_info *dev = ctx->dev;
- ctx->mode = RK_CRYPTO_TDES_CHAINMODE_CBC | RK_CRYPTO_DEC;
+ rctx->mode = RK_CRYPTO_TDES_CHAINMODE_CBC | RK_CRYPTO_DEC;
return rk_handle_req(dev, req);
}
@@ -156,9 +164,10 @@ static int rk_des3_ede_ecb_encrypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_crypto_info *dev = ctx->dev;
- ctx->mode = RK_CRYPTO_TDES_SELECT;
+ rctx->mode = RK_CRYPTO_TDES_SELECT;
return rk_handle_req(dev, req);
}
@@ -166,9 +175,10 @@ static int rk_des3_ede_ecb_decrypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_crypto_info *dev = ctx->dev;
- ctx->mode = RK_CRYPTO_TDES_SELECT | RK_CRYPTO_DEC;
+ rctx->mode = RK_CRYPTO_TDES_SELECT | RK_CRYPTO_DEC;
return rk_handle_req(dev, req);
}
@@ -176,9 +186,10 @@ static int rk_des3_ede_cbc_encrypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_crypto_info *dev = ctx->dev;
- ctx->mode = RK_CRYPTO_TDES_SELECT | RK_CRYPTO_TDES_CHAINMODE_CBC;
+ rctx->mode = RK_CRYPTO_TDES_SELECT | RK_CRYPTO_TDES_CHAINMODE_CBC;
return rk_handle_req(dev, req);
}
@@ -186,9 +197,10 @@ static int rk_des3_ede_cbc_decrypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_crypto_info *dev = ctx->dev;
- ctx->mode = RK_CRYPTO_TDES_SELECT | RK_CRYPTO_TDES_CHAINMODE_CBC |
+ rctx->mode = RK_CRYPTO_TDES_SELECT | RK_CRYPTO_TDES_CHAINMODE_CBC |
RK_CRYPTO_DEC;
return rk_handle_req(dev, req);
}
@@ -199,6 +211,7 @@ static void rk_ablk_hw_init(struct rk_crypto_info *dev)
skcipher_request_cast(dev->async_req);
struct crypto_skcipher *cipher = crypto_skcipher_reqtfm(req);
struct crypto_tfm *tfm = crypto_skcipher_tfm(cipher);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(cipher);
u32 ivsize, block, conf_reg = 0;
@@ -206,22 +219,22 @@ static void rk_ablk_hw_init(struct rk_crypto_info *dev)
ivsize = crypto_skcipher_ivsize(cipher);
if (block == DES_BLOCK_SIZE) {
- ctx->mode |= RK_CRYPTO_TDES_FIFO_MODE |
+ rctx->mode |= RK_CRYPTO_TDES_FIFO_MODE |
RK_CRYPTO_TDES_BYTESWAP_KEY |
RK_CRYPTO_TDES_BYTESWAP_IV;
- CRYPTO_WRITE(dev, RK_CRYPTO_TDES_CTRL, ctx->mode);
+ CRYPTO_WRITE(dev, RK_CRYPTO_TDES_CTRL, rctx->mode);
memcpy_toio(dev->reg + RK_CRYPTO_TDES_IV_0, req->iv, ivsize);
conf_reg = RK_CRYPTO_DESSEL;
} else {
- ctx->mode |= RK_CRYPTO_AES_FIFO_MODE |
+ rctx->mode |= RK_CRYPTO_AES_FIFO_MODE |
RK_CRYPTO_AES_KEY_CHANGE |
RK_CRYPTO_AES_BYTESWAP_KEY |
RK_CRYPTO_AES_BYTESWAP_IV;
if (ctx->keylen == AES_KEYSIZE_192)
- ctx->mode |= RK_CRYPTO_AES_192BIT_key;
+ rctx->mode |= RK_CRYPTO_AES_192BIT_key;
else if (ctx->keylen == AES_KEYSIZE_256)
- ctx->mode |= RK_CRYPTO_AES_256BIT_key;
- CRYPTO_WRITE(dev, RK_CRYPTO_AES_CTRL, ctx->mode);
+ rctx->mode |= RK_CRYPTO_AES_256BIT_key;
+ CRYPTO_WRITE(dev, RK_CRYPTO_AES_CTRL, rctx->mode);
memcpy_toio(dev->reg + RK_CRYPTO_AES_IV_0, req->iv, ivsize);
}
conf_reg |= RK_CRYPTO_BYTESWAP_BTFIFO |
@@ -246,6 +259,7 @@ static int rk_set_data_start(struct rk_crypto_info *dev)
struct skcipher_request *req =
skcipher_request_cast(dev->async_req);
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
u32 ivsize = crypto_skcipher_ivsize(tfm);
u8 *src_last_blk = page_address(sg_page(dev->sg_src)) +
@@ -254,7 +268,7 @@ static int rk_set_data_start(struct rk_crypto_info *dev)
/* Store the iv that need to be updated in chain mode.
* And update the IV buffer to contain the next IV for decryption mode.
*/
- if (ctx->mode & RK_CRYPTO_DEC) {
+ if (rctx->mode & RK_CRYPTO_DEC) {
memcpy(ctx->iv, src_last_blk, ivsize);
sg_pcopy_to_buffer(dev->first, dev->src_nents, req->iv,
ivsize, dev->total - ivsize);
@@ -294,11 +308,12 @@ static void rk_iv_copyback(struct rk_crypto_info *dev)
struct skcipher_request *req =
skcipher_request_cast(dev->async_req);
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
u32 ivsize = crypto_skcipher_ivsize(tfm);
/* Update the IV buffer to contain the next IV for encryption mode. */
- if (!(ctx->mode & RK_CRYPTO_DEC)) {
+ if (!(rctx->mode & RK_CRYPTO_DEC)) {
if (dev->aligned) {
memcpy(req->iv, sg_virt(dev->sg_dst) +
dev->sg_dst->length - ivsize, ivsize);
@@ -314,11 +329,12 @@ static void rk_update_iv(struct rk_crypto_info *dev)
struct skcipher_request *req =
skcipher_request_cast(dev->async_req);
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
u32 ivsize = crypto_skcipher_ivsize(tfm);
u8 *new_iv = NULL;
- if (ctx->mode & RK_CRYPTO_DEC) {
+ if (rctx->mode & RK_CRYPTO_DEC) {
new_iv = ctx->iv;
} else {
new_iv = page_address(sg_page(dev->sg_dst)) +
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 372/731] crypto: rockchip - add fallback for cipher
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (370 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 371/731] crypto: rockchip - do not store mode globally Greg Kroah-Hartman
@ 2022-12-28 14:37 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 373/731] crypto: rockchip - add fallback for ahash Greg Kroah-Hartman
` (369 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Keeping, Corentin Labbe,
Herbert Xu, Sasha Levin
From: Corentin Labbe <clabbe@baylibre.com>
[ Upstream commit 68ef8af09a1a912a5ed2cfaa4cca7606f52cef90 ]
The hardware does not handle 0 size length request, let's add a
fallback.
Furthermore fallback will be used for all unaligned case the hardware
cannot handle.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/Kconfig | 4 +
drivers/crypto/rockchip/rk3288_crypto.h | 2 +
.../crypto/rockchip/rk3288_crypto_skcipher.c | 97 ++++++++++++++++---
3 files changed, 90 insertions(+), 13 deletions(-)
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 51690e73153a..9432375988fe 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -772,6 +772,10 @@ config CRYPTO_DEV_IMGTEC_HASH
config CRYPTO_DEV_ROCKCHIP
tristate "Rockchip's Cryptographic Engine driver"
depends on OF && ARCH_ROCKCHIP
+ depends on PM
+ select CRYPTO_ECB
+ select CRYPTO_CBC
+ select CRYPTO_DES
select CRYPTO_AES
select CRYPTO_LIB_DES
select CRYPTO_MD5
diff --git a/drivers/crypto/rockchip/rk3288_crypto.h b/drivers/crypto/rockchip/rk3288_crypto.h
index 3e60e3dca1b5..dfff0e2a83e4 100644
--- a/drivers/crypto/rockchip/rk3288_crypto.h
+++ b/drivers/crypto/rockchip/rk3288_crypto.h
@@ -246,10 +246,12 @@ struct rk_cipher_ctx {
struct rk_crypto_info *dev;
unsigned int keylen;
u8 iv[AES_BLOCK_SIZE];
+ struct crypto_skcipher *fallback_tfm;
};
struct rk_cipher_rctx {
u32 mode;
+ struct skcipher_request fallback_req; // keep at the end
};
enum alg_type {
diff --git a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
index bbd0bf52bf07..eac5bba66e25 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
@@ -13,6 +13,63 @@
#define RK_CRYPTO_DEC BIT(0)
+static int rk_cipher_need_fallback(struct skcipher_request *req)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ unsigned int bs = crypto_skcipher_blocksize(tfm);
+ struct scatterlist *sgs, *sgd;
+ unsigned int stodo, dtodo, len;
+
+ if (!req->cryptlen)
+ return true;
+
+ len = req->cryptlen;
+ sgs = req->src;
+ sgd = req->dst;
+ while (sgs && sgd) {
+ if (!IS_ALIGNED(sgs->offset, sizeof(u32))) {
+ return true;
+ }
+ if (!IS_ALIGNED(sgd->offset, sizeof(u32))) {
+ return true;
+ }
+ stodo = min(len, sgs->length);
+ if (stodo % bs) {
+ return true;
+ }
+ dtodo = min(len, sgd->length);
+ if (dtodo % bs) {
+ return true;
+ }
+ if (stodo != dtodo) {
+ return true;
+ }
+ len -= stodo;
+ sgs = sg_next(sgs);
+ sgd = sg_next(sgd);
+ }
+ return false;
+}
+
+static int rk_cipher_fallback(struct skcipher_request *areq)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(areq);
+ struct rk_cipher_ctx *op = crypto_skcipher_ctx(tfm);
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(areq);
+ int err;
+
+ skcipher_request_set_tfm(&rctx->fallback_req, op->fallback_tfm);
+ skcipher_request_set_callback(&rctx->fallback_req, areq->base.flags,
+ areq->base.complete, areq->base.data);
+ skcipher_request_set_crypt(&rctx->fallback_req, areq->src, areq->dst,
+ areq->cryptlen, areq->iv);
+ if (rctx->mode & RK_CRYPTO_DEC)
+ err = crypto_skcipher_decrypt(&rctx->fallback_req);
+ else
+ err = crypto_skcipher_encrypt(&rctx->fallback_req);
+ return err;
+}
+
static void rk_crypto_complete(struct crypto_async_request *base, int err)
{
if (base->complete)
@@ -22,10 +79,10 @@ static void rk_crypto_complete(struct crypto_async_request *base, int err)
static int rk_handle_req(struct rk_crypto_info *dev,
struct skcipher_request *req)
{
- if (!IS_ALIGNED(req->cryptlen, dev->align_size))
- return -EINVAL;
- else
- return dev->enqueue(dev, &req->base);
+ if (rk_cipher_need_fallback(req))
+ return rk_cipher_fallback(req);
+
+ return dev->enqueue(dev, &req->base);
}
static int rk_aes_setkey(struct crypto_skcipher *cipher,
@@ -39,7 +96,8 @@ static int rk_aes_setkey(struct crypto_skcipher *cipher,
return -EINVAL;
ctx->keylen = keylen;
memcpy_toio(ctx->dev->reg + RK_CRYPTO_AES_KEY_0, key, keylen);
- return 0;
+
+ return crypto_skcipher_setkey(ctx->fallback_tfm, key, keylen);
}
static int rk_des_setkey(struct crypto_skcipher *cipher,
@@ -54,7 +112,8 @@ static int rk_des_setkey(struct crypto_skcipher *cipher,
ctx->keylen = keylen;
memcpy_toio(ctx->dev->reg + RK_CRYPTO_TDES_KEY1_0, key, keylen);
- return 0;
+
+ return crypto_skcipher_setkey(ctx->fallback_tfm, key, keylen);
}
static int rk_tdes_setkey(struct crypto_skcipher *cipher,
@@ -69,7 +128,7 @@ static int rk_tdes_setkey(struct crypto_skcipher *cipher,
ctx->keylen = keylen;
memcpy_toio(ctx->dev->reg + RK_CRYPTO_TDES_KEY1_0, key, keylen);
- return 0;
+ return crypto_skcipher_setkey(ctx->fallback_tfm, key, keylen);
}
static int rk_aes_ecb_encrypt(struct skcipher_request *req)
@@ -394,6 +453,7 @@ static int rk_ablk_init_tfm(struct crypto_skcipher *tfm)
{
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
struct skcipher_alg *alg = crypto_skcipher_alg(tfm);
+ const char *name = crypto_tfm_alg_name(&tfm->base);
struct rk_crypto_tmp *algt;
algt = container_of(alg, struct rk_crypto_tmp, alg.skcipher);
@@ -407,6 +467,16 @@ static int rk_ablk_init_tfm(struct crypto_skcipher *tfm)
if (!ctx->dev->addr_vir)
return -ENOMEM;
+ ctx->fallback_tfm = crypto_alloc_skcipher(name, 0, CRYPTO_ALG_NEED_FALLBACK);
+ if (IS_ERR(ctx->fallback_tfm)) {
+ dev_err(ctx->dev->dev, "ERROR: Cannot allocate fallback for %s %ld\n",
+ name, PTR_ERR(ctx->fallback_tfm));
+ return PTR_ERR(ctx->fallback_tfm);
+ }
+
+ tfm->reqsize = sizeof(struct rk_cipher_rctx) +
+ crypto_skcipher_reqsize(ctx->fallback_tfm);
+
return 0;
}
@@ -415,6 +485,7 @@ static void rk_ablk_exit_tfm(struct crypto_skcipher *tfm)
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
free_page((unsigned long)ctx->dev->addr_vir);
+ crypto_free_skcipher(ctx->fallback_tfm);
}
struct rk_crypto_tmp rk_ecb_aes_alg = {
@@ -423,7 +494,7 @@ struct rk_crypto_tmp rk_ecb_aes_alg = {
.base.cra_name = "ecb(aes)",
.base.cra_driver_name = "ecb-aes-rk",
.base.cra_priority = 300,
- .base.cra_flags = CRYPTO_ALG_ASYNC,
+ .base.cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK,
.base.cra_blocksize = AES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct rk_cipher_ctx),
.base.cra_alignmask = 0x0f,
@@ -445,7 +516,7 @@ struct rk_crypto_tmp rk_cbc_aes_alg = {
.base.cra_name = "cbc(aes)",
.base.cra_driver_name = "cbc-aes-rk",
.base.cra_priority = 300,
- .base.cra_flags = CRYPTO_ALG_ASYNC,
+ .base.cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK,
.base.cra_blocksize = AES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct rk_cipher_ctx),
.base.cra_alignmask = 0x0f,
@@ -468,7 +539,7 @@ struct rk_crypto_tmp rk_ecb_des_alg = {
.base.cra_name = "ecb(des)",
.base.cra_driver_name = "ecb-des-rk",
.base.cra_priority = 300,
- .base.cra_flags = CRYPTO_ALG_ASYNC,
+ .base.cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK,
.base.cra_blocksize = DES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct rk_cipher_ctx),
.base.cra_alignmask = 0x07,
@@ -490,7 +561,7 @@ struct rk_crypto_tmp rk_cbc_des_alg = {
.base.cra_name = "cbc(des)",
.base.cra_driver_name = "cbc-des-rk",
.base.cra_priority = 300,
- .base.cra_flags = CRYPTO_ALG_ASYNC,
+ .base.cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK,
.base.cra_blocksize = DES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct rk_cipher_ctx),
.base.cra_alignmask = 0x07,
@@ -513,7 +584,7 @@ struct rk_crypto_tmp rk_ecb_des3_ede_alg = {
.base.cra_name = "ecb(des3_ede)",
.base.cra_driver_name = "ecb-des3-ede-rk",
.base.cra_priority = 300,
- .base.cra_flags = CRYPTO_ALG_ASYNC,
+ .base.cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK,
.base.cra_blocksize = DES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct rk_cipher_ctx),
.base.cra_alignmask = 0x07,
@@ -535,7 +606,7 @@ struct rk_crypto_tmp rk_cbc_des3_ede_alg = {
.base.cra_name = "cbc(des3_ede)",
.base.cra_driver_name = "cbc-des3-ede-rk",
.base.cra_priority = 300,
- .base.cra_flags = CRYPTO_ALG_ASYNC,
+ .base.cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK,
.base.cra_blocksize = DES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct rk_cipher_ctx),
.base.cra_alignmask = 0x07,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 373/731] crypto: rockchip - add fallback for ahash
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (371 preceding siblings ...)
2022-12-28 14:37 ` [PATCH 5.15 372/731] crypto: rockchip - add fallback for cipher Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 374/731] crypto: rockchip - better handle cipher key Greg Kroah-Hartman
` (368 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Keeping, Corentin Labbe,
Herbert Xu, Sasha Levin
From: Corentin Labbe <clabbe@baylibre.com>
[ Upstream commit 816600485cb597b3ff7d6806a95a78512839f775 ]
Adds a fallback for all case hardware cannot handle.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/rockchip/rk3288_crypto_ahash.c | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/drivers/crypto/rockchip/rk3288_crypto_ahash.c b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
index 49017d1fb510..16009bb0bf16 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_ahash.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
@@ -16,6 +16,40 @@
* so we put the fixed hash out when met zero message.
*/
+static bool rk_ahash_need_fallback(struct ahash_request *req)
+{
+ struct scatterlist *sg;
+
+ sg = req->src;
+ while (sg) {
+ if (!IS_ALIGNED(sg->offset, sizeof(u32))) {
+ return true;
+ }
+ if (sg->length % 4) {
+ return true;
+ }
+ sg = sg_next(sg);
+ }
+ return false;
+}
+
+static int rk_ahash_digest_fb(struct ahash_request *areq)
+{
+ struct rk_ahash_rctx *rctx = ahash_request_ctx(areq);
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
+ struct rk_ahash_ctx *tfmctx = crypto_ahash_ctx(tfm);
+
+ ahash_request_set_tfm(&rctx->fallback_req, tfmctx->fallback_tfm);
+ rctx->fallback_req.base.flags = areq->base.flags &
+ CRYPTO_TFM_REQ_MAY_SLEEP;
+
+ rctx->fallback_req.nbytes = areq->nbytes;
+ rctx->fallback_req.src = areq->src;
+ rctx->fallback_req.result = areq->result;
+
+ return crypto_ahash_digest(&rctx->fallback_req);
+}
+
static int zero_message_process(struct ahash_request *req)
{
struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
@@ -167,6 +201,9 @@ static int rk_ahash_digest(struct ahash_request *req)
struct rk_ahash_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
struct rk_crypto_info *dev = tctx->dev;
+ if (rk_ahash_need_fallback(req))
+ return rk_ahash_digest_fb(req);
+
if (!req->nbytes)
return zero_message_process(req);
else
@@ -309,6 +346,7 @@ static void rk_cra_hash_exit(struct crypto_tfm *tfm)
struct rk_ahash_ctx *tctx = crypto_tfm_ctx(tfm);
free_page((unsigned long)tctx->dev->addr_vir);
+ crypto_free_ahash(tctx->fallback_tfm);
}
struct rk_crypto_tmp rk_ahash_sha1 = {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 374/731] crypto: rockchip - better handle cipher key
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (372 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 373/731] crypto: rockchip - add fallback for ahash Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 375/731] crypto: rockchip - remove non-aligned handling Greg Kroah-Hartman
` (367 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Keeping, Corentin Labbe,
Herbert Xu, Sasha Levin
From: Corentin Labbe <clabbe@baylibre.com>
[ Upstream commit d6b23ccef82816050c2fd458c9dabfa0e0af09b9 ]
The key should not be set in hardware too much in advance, this will
fail it 2 TFM with different keys generate alternative requests.
The key should be stored and used just before doing cipher operations.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/rockchip/rk3288_crypto.h | 1 +
drivers/crypto/rockchip/rk3288_crypto_skcipher.c | 10 +++++++---
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/rockchip/rk3288_crypto.h b/drivers/crypto/rockchip/rk3288_crypto.h
index dfff0e2a83e4..665cc0bb2264 100644
--- a/drivers/crypto/rockchip/rk3288_crypto.h
+++ b/drivers/crypto/rockchip/rk3288_crypto.h
@@ -245,6 +245,7 @@ struct rk_ahash_rctx {
struct rk_cipher_ctx {
struct rk_crypto_info *dev;
unsigned int keylen;
+ u8 key[AES_MAX_KEY_SIZE];
u8 iv[AES_BLOCK_SIZE];
struct crypto_skcipher *fallback_tfm;
};
diff --git a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
index eac5bba66e25..1ef94f8db2c5 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
@@ -95,7 +95,7 @@ static int rk_aes_setkey(struct crypto_skcipher *cipher,
keylen != AES_KEYSIZE_256)
return -EINVAL;
ctx->keylen = keylen;
- memcpy_toio(ctx->dev->reg + RK_CRYPTO_AES_KEY_0, key, keylen);
+ memcpy(ctx->key, key, keylen);
return crypto_skcipher_setkey(ctx->fallback_tfm, key, keylen);
}
@@ -111,7 +111,7 @@ static int rk_des_setkey(struct crypto_skcipher *cipher,
return err;
ctx->keylen = keylen;
- memcpy_toio(ctx->dev->reg + RK_CRYPTO_TDES_KEY1_0, key, keylen);
+ memcpy(ctx->key, key, keylen);
return crypto_skcipher_setkey(ctx->fallback_tfm, key, keylen);
}
@@ -127,7 +127,8 @@ static int rk_tdes_setkey(struct crypto_skcipher *cipher,
return err;
ctx->keylen = keylen;
- memcpy_toio(ctx->dev->reg + RK_CRYPTO_TDES_KEY1_0, key, keylen);
+ memcpy(ctx->key, key, keylen);
+
return crypto_skcipher_setkey(ctx->fallback_tfm, key, keylen);
}
@@ -283,6 +284,7 @@ static void rk_ablk_hw_init(struct rk_crypto_info *dev)
RK_CRYPTO_TDES_BYTESWAP_IV;
CRYPTO_WRITE(dev, RK_CRYPTO_TDES_CTRL, rctx->mode);
memcpy_toio(dev->reg + RK_CRYPTO_TDES_IV_0, req->iv, ivsize);
+ memcpy_toio(ctx->dev->reg + RK_CRYPTO_TDES_KEY1_0, ctx->key, ctx->keylen);
conf_reg = RK_CRYPTO_DESSEL;
} else {
rctx->mode |= RK_CRYPTO_AES_FIFO_MODE |
@@ -295,6 +297,7 @@ static void rk_ablk_hw_init(struct rk_crypto_info *dev)
rctx->mode |= RK_CRYPTO_AES_256BIT_key;
CRYPTO_WRITE(dev, RK_CRYPTO_AES_CTRL, rctx->mode);
memcpy_toio(dev->reg + RK_CRYPTO_AES_IV_0, req->iv, ivsize);
+ memcpy_toio(ctx->dev->reg + RK_CRYPTO_AES_KEY_0, ctx->key, ctx->keylen);
}
conf_reg |= RK_CRYPTO_BYTESWAP_BTFIFO |
RK_CRYPTO_BYTESWAP_BRFIFO;
@@ -484,6 +487,7 @@ static void rk_ablk_exit_tfm(struct crypto_skcipher *tfm)
{
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ memzero_explicit(ctx->key, ctx->keylen);
free_page((unsigned long)ctx->dev->addr_vir);
crypto_free_skcipher(ctx->fallback_tfm);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 375/731] crypto: rockchip - remove non-aligned handling
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (373 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 374/731] crypto: rockchip - better handle cipher key Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 376/731] crypto: rockchip - rework by using crypto_engine Greg Kroah-Hartman
` (366 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Keeping, Corentin Labbe,
Herbert Xu, Sasha Levin
From: Corentin Labbe <clabbe@baylibre.com>
[ Upstream commit bb3c7b73363c9a149b12b74c44ae94b73a8fddf8 ]
Now driver have fallback for un-aligned cases, remove all code handling
those cases.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/rockchip/rk3288_crypto.c | 69 +++++--------------
drivers/crypto/rockchip/rk3288_crypto.h | 4 --
drivers/crypto/rockchip/rk3288_crypto_ahash.c | 22 ++----
.../crypto/rockchip/rk3288_crypto_skcipher.c | 39 +++--------
4 files changed, 31 insertions(+), 103 deletions(-)
diff --git a/drivers/crypto/rockchip/rk3288_crypto.c b/drivers/crypto/rockchip/rk3288_crypto.c
index 5f8444b9633a..31453257ab11 100644
--- a/drivers/crypto/rockchip/rk3288_crypto.c
+++ b/drivers/crypto/rockchip/rk3288_crypto.c
@@ -88,63 +88,26 @@ static int rk_load_data(struct rk_crypto_info *dev,
{
unsigned int count;
- dev->aligned = dev->aligned ?
- check_alignment(sg_src, sg_dst, dev->align_size) :
- dev->aligned;
- if (dev->aligned) {
- count = min(dev->left_bytes, sg_src->length);
- dev->left_bytes -= count;
-
- if (!dma_map_sg(dev->dev, sg_src, 1, DMA_TO_DEVICE)) {
- dev_err(dev->dev, "[%s:%d] dma_map_sg(src) error\n",
+ count = min(dev->left_bytes, sg_src->length);
+ dev->left_bytes -= count;
+
+ if (!dma_map_sg(dev->dev, sg_src, 1, DMA_TO_DEVICE)) {
+ dev_err(dev->dev, "[%s:%d] dma_map_sg(src) error\n",
__func__, __LINE__);
- return -EINVAL;
- }
- dev->addr_in = sg_dma_address(sg_src);
+ return -EINVAL;
+ }
+ dev->addr_in = sg_dma_address(sg_src);
- if (sg_dst) {
- if (!dma_map_sg(dev->dev, sg_dst, 1, DMA_FROM_DEVICE)) {
- dev_err(dev->dev,
+ if (sg_dst) {
+ if (!dma_map_sg(dev->dev, sg_dst, 1, DMA_FROM_DEVICE)) {
+ dev_err(dev->dev,
"[%s:%d] dma_map_sg(dst) error\n",
__func__, __LINE__);
- dma_unmap_sg(dev->dev, sg_src, 1,
- DMA_TO_DEVICE);
- return -EINVAL;
- }
- dev->addr_out = sg_dma_address(sg_dst);
- }
- } else {
- count = (dev->left_bytes > PAGE_SIZE) ?
- PAGE_SIZE : dev->left_bytes;
-
- if (!sg_pcopy_to_buffer(dev->first, dev->src_nents,
- dev->addr_vir, count,
- dev->total - dev->left_bytes)) {
- dev_err(dev->dev, "[%s:%d] pcopy err\n",
- __func__, __LINE__);
+ dma_unmap_sg(dev->dev, sg_src, 1,
+ DMA_TO_DEVICE);
return -EINVAL;
}
- dev->left_bytes -= count;
- sg_init_one(&dev->sg_tmp, dev->addr_vir, count);
- if (!dma_map_sg(dev->dev, &dev->sg_tmp, 1, DMA_TO_DEVICE)) {
- dev_err(dev->dev, "[%s:%d] dma_map_sg(sg_tmp) error\n",
- __func__, __LINE__);
- return -ENOMEM;
- }
- dev->addr_in = sg_dma_address(&dev->sg_tmp);
-
- if (sg_dst) {
- if (!dma_map_sg(dev->dev, &dev->sg_tmp, 1,
- DMA_FROM_DEVICE)) {
- dev_err(dev->dev,
- "[%s:%d] dma_map_sg(sg_tmp) error\n",
- __func__, __LINE__);
- dma_unmap_sg(dev->dev, &dev->sg_tmp, 1,
- DMA_TO_DEVICE);
- return -ENOMEM;
- }
- dev->addr_out = sg_dma_address(&dev->sg_tmp);
- }
+ dev->addr_out = sg_dma_address(sg_dst);
}
dev->count = count;
return 0;
@@ -154,11 +117,11 @@ static void rk_unload_data(struct rk_crypto_info *dev)
{
struct scatterlist *sg_in, *sg_out;
- sg_in = dev->aligned ? dev->sg_src : &dev->sg_tmp;
+ sg_in = dev->sg_src;
dma_unmap_sg(dev->dev, sg_in, 1, DMA_TO_DEVICE);
if (dev->sg_dst) {
- sg_out = dev->aligned ? dev->sg_dst : &dev->sg_tmp;
+ sg_out = dev->sg_dst;
dma_unmap_sg(dev->dev, sg_out, 1, DMA_FROM_DEVICE);
}
}
diff --git a/drivers/crypto/rockchip/rk3288_crypto.h b/drivers/crypto/rockchip/rk3288_crypto.h
index 665cc0bb2264..df4db59fa13e 100644
--- a/drivers/crypto/rockchip/rk3288_crypto.h
+++ b/drivers/crypto/rockchip/rk3288_crypto.h
@@ -204,12 +204,8 @@ struct rk_crypto_info {
/* the public variable */
struct scatterlist *sg_src;
struct scatterlist *sg_dst;
- struct scatterlist sg_tmp;
struct scatterlist *first;
unsigned int left_bytes;
- void *addr_vir;
- int aligned;
- int align_size;
size_t src_nents;
size_t dst_nents;
unsigned int total;
diff --git a/drivers/crypto/rockchip/rk3288_crypto_ahash.c b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
index 16009bb0bf16..c762e462eb57 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_ahash.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
@@ -236,8 +236,6 @@ static int rk_ahash_start(struct rk_crypto_info *dev)
dev->total = req->nbytes;
dev->left_bytes = req->nbytes;
- dev->aligned = 0;
- dev->align_size = 4;
dev->sg_dst = NULL;
dev->sg_src = req->src;
dev->first = req->src;
@@ -272,15 +270,13 @@ static int rk_ahash_crypto_rx(struct rk_crypto_info *dev)
dev->unload_data(dev);
if (dev->left_bytes) {
- if (dev->aligned) {
- if (sg_is_last(dev->sg_src)) {
- dev_warn(dev->dev, "[%s:%d], Lack of data\n",
- __func__, __LINE__);
- err = -ENOMEM;
- goto out_rx;
- }
- dev->sg_src = sg_next(dev->sg_src);
+ if (sg_is_last(dev->sg_src)) {
+ dev_warn(dev->dev, "[%s:%d], Lack of data\n",
+ __func__, __LINE__);
+ err = -ENOMEM;
+ goto out_rx;
}
+ dev->sg_src = sg_next(dev->sg_src);
err = rk_ahash_set_data_start(dev);
} else {
/*
@@ -318,11 +314,6 @@ static int rk_cra_hash_init(struct crypto_tfm *tfm)
algt = container_of(alg, struct rk_crypto_tmp, alg.hash);
tctx->dev = algt->dev;
- tctx->dev->addr_vir = (void *)__get_free_page(GFP_KERNEL);
- if (!tctx->dev->addr_vir) {
- dev_err(tctx->dev->dev, "failed to kmalloc for addr_vir\n");
- return -ENOMEM;
- }
tctx->dev->start = rk_ahash_start;
tctx->dev->update = rk_ahash_crypto_rx;
tctx->dev->complete = rk_ahash_crypto_complete;
@@ -345,7 +336,6 @@ static void rk_cra_hash_exit(struct crypto_tfm *tfm)
{
struct rk_ahash_ctx *tctx = crypto_tfm_ctx(tfm);
- free_page((unsigned long)tctx->dev->addr_vir);
crypto_free_ahash(tctx->fallback_tfm);
}
diff --git a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
index 1ef94f8db2c5..d067b7f09165 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
@@ -356,7 +356,6 @@ static int rk_ablk_start(struct rk_crypto_info *dev)
dev->src_nents = sg_nents(req->src);
dev->sg_dst = req->dst;
dev->dst_nents = sg_nents(req->dst);
- dev->aligned = 1;
spin_lock_irqsave(&dev->lock, flags);
rk_ablk_hw_init(dev);
@@ -376,13 +375,9 @@ static void rk_iv_copyback(struct rk_crypto_info *dev)
/* Update the IV buffer to contain the next IV for encryption mode. */
if (!(rctx->mode & RK_CRYPTO_DEC)) {
- if (dev->aligned) {
- memcpy(req->iv, sg_virt(dev->sg_dst) +
- dev->sg_dst->length - ivsize, ivsize);
- } else {
- memcpy(req->iv, dev->addr_vir +
- dev->count - ivsize, ivsize);
- }
+ memcpy(req->iv,
+ sg_virt(dev->sg_dst) + dev->sg_dst->length - ivsize,
+ ivsize);
}
}
@@ -420,27 +415,16 @@ static int rk_ablk_rx(struct rk_crypto_info *dev)
skcipher_request_cast(dev->async_req);
dev->unload_data(dev);
- if (!dev->aligned) {
- if (!sg_pcopy_from_buffer(req->dst, dev->dst_nents,
- dev->addr_vir, dev->count,
- dev->total - dev->left_bytes -
- dev->count)) {
- err = -EINVAL;
- goto out_rx;
- }
- }
if (dev->left_bytes) {
rk_update_iv(dev);
- if (dev->aligned) {
- if (sg_is_last(dev->sg_src)) {
- dev_err(dev->dev, "[%s:%d] Lack of data\n",
+ if (sg_is_last(dev->sg_src)) {
+ dev_err(dev->dev, "[%s:%d] Lack of data\n",
__func__, __LINE__);
- err = -ENOMEM;
- goto out_rx;
- }
- dev->sg_src = sg_next(dev->sg_src);
- dev->sg_dst = sg_next(dev->sg_dst);
+ err = -ENOMEM;
+ goto out_rx;
}
+ dev->sg_src = sg_next(dev->sg_src);
+ dev->sg_dst = sg_next(dev->sg_dst);
err = rk_set_data_start(dev);
} else {
rk_iv_copyback(dev);
@@ -462,13 +446,9 @@ static int rk_ablk_init_tfm(struct crypto_skcipher *tfm)
algt = container_of(alg, struct rk_crypto_tmp, alg.skcipher);
ctx->dev = algt->dev;
- ctx->dev->align_size = crypto_tfm_alg_alignmask(crypto_skcipher_tfm(tfm)) + 1;
ctx->dev->start = rk_ablk_start;
ctx->dev->update = rk_ablk_rx;
ctx->dev->complete = rk_crypto_complete;
- ctx->dev->addr_vir = (char *)__get_free_page(GFP_KERNEL);
- if (!ctx->dev->addr_vir)
- return -ENOMEM;
ctx->fallback_tfm = crypto_alloc_skcipher(name, 0, CRYPTO_ALG_NEED_FALLBACK);
if (IS_ERR(ctx->fallback_tfm)) {
@@ -488,7 +468,6 @@ static void rk_ablk_exit_tfm(struct crypto_skcipher *tfm)
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
memzero_explicit(ctx->key, ctx->keylen);
- free_page((unsigned long)ctx->dev->addr_vir);
crypto_free_skcipher(ctx->fallback_tfm);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 376/731] crypto: rockchip - rework by using crypto_engine
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (374 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 375/731] crypto: rockchip - remove non-aligned handling Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 377/731] apparmor: Fix memleak in alloc_ns() Greg Kroah-Hartman
` (365 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Keeping, Corentin Labbe,
Herbert Xu, Sasha Levin
From: Corentin Labbe <clabbe@baylibre.com>
[ Upstream commit 57d67c6e8219b2a034c16d6149e30fb40fd39935 ]
Instead of doing manual queue management, let's use the crypto/engine
for that.
In the same time, rework the requests handling to be easier to
understand (and fix all bugs related to them).
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/Kconfig | 1 +
drivers/crypto/rockchip/rk3288_crypto.c | 152 +----------
drivers/crypto/rockchip/rk3288_crypto.h | 39 +--
drivers/crypto/rockchip/rk3288_crypto_ahash.c | 144 +++++-----
.../crypto/rockchip/rk3288_crypto_skcipher.c | 250 +++++++++---------
5 files changed, 221 insertions(+), 365 deletions(-)
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 9432375988fe..b46343b5c26b 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -777,6 +777,7 @@ config CRYPTO_DEV_ROCKCHIP
select CRYPTO_CBC
select CRYPTO_DES
select CRYPTO_AES
+ select CRYPTO_ENGINE
select CRYPTO_LIB_DES
select CRYPTO_MD5
select CRYPTO_SHA1
diff --git a/drivers/crypto/rockchip/rk3288_crypto.c b/drivers/crypto/rockchip/rk3288_crypto.c
index 31453257ab11..14a0aef18ab1 100644
--- a/drivers/crypto/rockchip/rk3288_crypto.c
+++ b/drivers/crypto/rockchip/rk3288_crypto.c
@@ -65,149 +65,24 @@ static void rk_crypto_disable_clk(struct rk_crypto_info *dev)
clk_disable_unprepare(dev->sclk);
}
-static int check_alignment(struct scatterlist *sg_src,
- struct scatterlist *sg_dst,
- int align_mask)
-{
- int in, out, align;
-
- in = IS_ALIGNED((uint32_t)sg_src->offset, 4) &&
- IS_ALIGNED((uint32_t)sg_src->length, align_mask);
- if (!sg_dst)
- return in;
- out = IS_ALIGNED((uint32_t)sg_dst->offset, 4) &&
- IS_ALIGNED((uint32_t)sg_dst->length, align_mask);
- align = in && out;
-
- return (align && (sg_src->length == sg_dst->length));
-}
-
-static int rk_load_data(struct rk_crypto_info *dev,
- struct scatterlist *sg_src,
- struct scatterlist *sg_dst)
-{
- unsigned int count;
-
- count = min(dev->left_bytes, sg_src->length);
- dev->left_bytes -= count;
-
- if (!dma_map_sg(dev->dev, sg_src, 1, DMA_TO_DEVICE)) {
- dev_err(dev->dev, "[%s:%d] dma_map_sg(src) error\n",
- __func__, __LINE__);
- return -EINVAL;
- }
- dev->addr_in = sg_dma_address(sg_src);
-
- if (sg_dst) {
- if (!dma_map_sg(dev->dev, sg_dst, 1, DMA_FROM_DEVICE)) {
- dev_err(dev->dev,
- "[%s:%d] dma_map_sg(dst) error\n",
- __func__, __LINE__);
- dma_unmap_sg(dev->dev, sg_src, 1,
- DMA_TO_DEVICE);
- return -EINVAL;
- }
- dev->addr_out = sg_dma_address(sg_dst);
- }
- dev->count = count;
- return 0;
-}
-
-static void rk_unload_data(struct rk_crypto_info *dev)
-{
- struct scatterlist *sg_in, *sg_out;
-
- sg_in = dev->sg_src;
- dma_unmap_sg(dev->dev, sg_in, 1, DMA_TO_DEVICE);
-
- if (dev->sg_dst) {
- sg_out = dev->sg_dst;
- dma_unmap_sg(dev->dev, sg_out, 1, DMA_FROM_DEVICE);
- }
-}
-
static irqreturn_t rk_crypto_irq_handle(int irq, void *dev_id)
{
struct rk_crypto_info *dev = platform_get_drvdata(dev_id);
u32 interrupt_status;
- spin_lock(&dev->lock);
interrupt_status = CRYPTO_READ(dev, RK_CRYPTO_INTSTS);
CRYPTO_WRITE(dev, RK_CRYPTO_INTSTS, interrupt_status);
+ dev->status = 1;
if (interrupt_status & 0x0a) {
dev_warn(dev->dev, "DMA Error\n");
- dev->err = -EFAULT;
+ dev->status = 0;
}
- tasklet_schedule(&dev->done_task);
+ complete(&dev->complete);
- spin_unlock(&dev->lock);
return IRQ_HANDLED;
}
-static int rk_crypto_enqueue(struct rk_crypto_info *dev,
- struct crypto_async_request *async_req)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&dev->lock, flags);
- ret = crypto_enqueue_request(&dev->queue, async_req);
- if (dev->busy) {
- spin_unlock_irqrestore(&dev->lock, flags);
- return ret;
- }
- dev->busy = true;
- spin_unlock_irqrestore(&dev->lock, flags);
- tasklet_schedule(&dev->queue_task);
-
- return ret;
-}
-
-static void rk_crypto_queue_task_cb(unsigned long data)
-{
- struct rk_crypto_info *dev = (struct rk_crypto_info *)data;
- struct crypto_async_request *async_req, *backlog;
- unsigned long flags;
- int err = 0;
-
- dev->err = 0;
- spin_lock_irqsave(&dev->lock, flags);
- backlog = crypto_get_backlog(&dev->queue);
- async_req = crypto_dequeue_request(&dev->queue);
-
- if (!async_req) {
- dev->busy = false;
- spin_unlock_irqrestore(&dev->lock, flags);
- return;
- }
- spin_unlock_irqrestore(&dev->lock, flags);
-
- if (backlog) {
- backlog->complete(backlog, -EINPROGRESS);
- backlog = NULL;
- }
-
- dev->async_req = async_req;
- err = dev->start(dev);
- if (err)
- dev->complete(dev->async_req, err);
-}
-
-static void rk_crypto_done_task_cb(unsigned long data)
-{
- struct rk_crypto_info *dev = (struct rk_crypto_info *)data;
-
- if (dev->err) {
- dev->complete(dev->async_req, dev->err);
- return;
- }
-
- dev->err = dev->update(dev);
- if (dev->err)
- dev->complete(dev->async_req, dev->err);
-}
-
static struct rk_crypto_tmp *rk_cipher_algs[] = {
&rk_ecb_aes_alg,
&rk_cbc_aes_alg,
@@ -300,8 +175,6 @@ static int rk_crypto_probe(struct platform_device *pdev)
if (err)
goto err_crypto;
- spin_lock_init(&crypto_info->lock);
-
crypto_info->reg = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(crypto_info->reg)) {
err = PTR_ERR(crypto_info->reg);
@@ -352,17 +225,11 @@ static int rk_crypto_probe(struct platform_device *pdev)
crypto_info->dev = &pdev->dev;
platform_set_drvdata(pdev, crypto_info);
- tasklet_init(&crypto_info->queue_task,
- rk_crypto_queue_task_cb, (unsigned long)crypto_info);
- tasklet_init(&crypto_info->done_task,
- rk_crypto_done_task_cb, (unsigned long)crypto_info);
- crypto_init_queue(&crypto_info->queue, 50);
+ crypto_info->engine = crypto_engine_alloc_init(&pdev->dev, true);
+ crypto_engine_start(crypto_info->engine);
+ init_completion(&crypto_info->complete);
rk_crypto_enable_clk(crypto_info);
- crypto_info->load_data = rk_load_data;
- crypto_info->unload_data = rk_unload_data;
- crypto_info->enqueue = rk_crypto_enqueue;
- crypto_info->busy = false;
err = rk_crypto_register(crypto_info);
if (err) {
@@ -374,9 +241,9 @@ static int rk_crypto_probe(struct platform_device *pdev)
return 0;
err_register_alg:
- tasklet_kill(&crypto_info->queue_task);
- tasklet_kill(&crypto_info->done_task);
+ crypto_engine_exit(crypto_info->engine);
err_crypto:
+ dev_err(dev, "Crypto Accelerator not successfully registered\n");
return err;
}
@@ -386,8 +253,7 @@ static int rk_crypto_remove(struct platform_device *pdev)
rk_crypto_unregister();
rk_crypto_disable_clk(crypto_tmp);
- tasklet_kill(&crypto_tmp->done_task);
- tasklet_kill(&crypto_tmp->queue_task);
+ crypto_engine_exit(crypto_tmp->engine);
return 0;
}
diff --git a/drivers/crypto/rockchip/rk3288_crypto.h b/drivers/crypto/rockchip/rk3288_crypto.h
index df4db59fa13e..045e811b4af8 100644
--- a/drivers/crypto/rockchip/rk3288_crypto.h
+++ b/drivers/crypto/rockchip/rk3288_crypto.h
@@ -5,9 +5,11 @@
#include <crypto/aes.h>
#include <crypto/internal/des.h>
#include <crypto/algapi.h>
+#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/scatterlist.h>
+#include <crypto/engine.h>
#include <crypto/internal/hash.h>
#include <crypto/internal/skcipher.h>
@@ -193,39 +195,15 @@ struct rk_crypto_info {
struct reset_control *rst;
void __iomem *reg;
int irq;
- struct crypto_queue queue;
- struct tasklet_struct queue_task;
- struct tasklet_struct done_task;
- struct crypto_async_request *async_req;
- int err;
- /* device lock */
- spinlock_t lock;
-
- /* the public variable */
- struct scatterlist *sg_src;
- struct scatterlist *sg_dst;
- struct scatterlist *first;
- unsigned int left_bytes;
- size_t src_nents;
- size_t dst_nents;
- unsigned int total;
- unsigned int count;
- dma_addr_t addr_in;
- dma_addr_t addr_out;
- bool busy;
- int (*start)(struct rk_crypto_info *dev);
- int (*update)(struct rk_crypto_info *dev);
- void (*complete)(struct crypto_async_request *base, int err);
- int (*load_data)(struct rk_crypto_info *dev,
- struct scatterlist *sg_src,
- struct scatterlist *sg_dst);
- void (*unload_data)(struct rk_crypto_info *dev);
- int (*enqueue)(struct rk_crypto_info *dev,
- struct crypto_async_request *async_req);
+
+ struct crypto_engine *engine;
+ struct completion complete;
+ int status;
};
/* the private variable of hash */
struct rk_ahash_ctx {
+ struct crypto_engine_ctx enginectx;
struct rk_crypto_info *dev;
/* for fallback */
struct crypto_ahash *fallback_tfm;
@@ -235,10 +213,12 @@ struct rk_ahash_ctx {
struct rk_ahash_rctx {
struct ahash_request fallback_req;
u32 mode;
+ int nrsg;
};
/* the private variable of cipher */
struct rk_cipher_ctx {
+ struct crypto_engine_ctx enginectx;
struct rk_crypto_info *dev;
unsigned int keylen;
u8 key[AES_MAX_KEY_SIZE];
@@ -247,6 +227,7 @@ struct rk_cipher_ctx {
};
struct rk_cipher_rctx {
+ u8 backup_iv[AES_BLOCK_SIZE];
u32 mode;
struct skcipher_request fallback_req; // keep at the end
};
diff --git a/drivers/crypto/rockchip/rk3288_crypto_ahash.c b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
index c762e462eb57..edd40e16a3f0 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_ahash.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
@@ -9,6 +9,7 @@
* Some ideas are from marvell/cesa.c and s5p-sss.c driver.
*/
#include <linux/device.h>
+#include <asm/unaligned.h>
#include "rk3288_crypto.h"
/*
@@ -72,16 +73,12 @@ static int zero_message_process(struct ahash_request *req)
return 0;
}
-static void rk_ahash_crypto_complete(struct crypto_async_request *base, int err)
+static void rk_ahash_reg_init(struct ahash_request *req)
{
- if (base->complete)
- base->complete(base, err);
-}
-
-static void rk_ahash_reg_init(struct rk_crypto_info *dev)
-{
- struct ahash_request *req = ahash_request_cast(dev->async_req);
struct rk_ahash_rctx *rctx = ahash_request_ctx(req);
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+ struct rk_ahash_ctx *tctx = crypto_ahash_ctx(tfm);
+ struct rk_crypto_info *dev = tctx->dev;
int reg_status;
reg_status = CRYPTO_READ(dev, RK_CRYPTO_CTRL) |
@@ -108,7 +105,7 @@ static void rk_ahash_reg_init(struct rk_crypto_info *dev)
RK_CRYPTO_BYTESWAP_BRFIFO |
RK_CRYPTO_BYTESWAP_BTFIFO);
- CRYPTO_WRITE(dev, RK_CRYPTO_HASH_MSG_LEN, dev->total);
+ CRYPTO_WRITE(dev, RK_CRYPTO_HASH_MSG_LEN, req->nbytes);
}
static int rk_ahash_init(struct ahash_request *req)
@@ -206,44 +203,59 @@ static int rk_ahash_digest(struct ahash_request *req)
if (!req->nbytes)
return zero_message_process(req);
- else
- return dev->enqueue(dev, &req->base);
+
+ return crypto_transfer_hash_request_to_engine(dev->engine, req);
}
-static void crypto_ahash_dma_start(struct rk_crypto_info *dev)
+static void crypto_ahash_dma_start(struct rk_crypto_info *dev, struct scatterlist *sg)
{
- CRYPTO_WRITE(dev, RK_CRYPTO_HRDMAS, dev->addr_in);
- CRYPTO_WRITE(dev, RK_CRYPTO_HRDMAL, (dev->count + 3) / 4);
+ CRYPTO_WRITE(dev, RK_CRYPTO_HRDMAS, sg_dma_address(sg));
+ CRYPTO_WRITE(dev, RK_CRYPTO_HRDMAL, sg_dma_len(sg) / 4);
CRYPTO_WRITE(dev, RK_CRYPTO_CTRL, RK_CRYPTO_HASH_START |
(RK_CRYPTO_HASH_START << 16));
}
-static int rk_ahash_set_data_start(struct rk_crypto_info *dev)
+static int rk_hash_prepare(struct crypto_engine *engine, void *breq)
+{
+ struct ahash_request *areq = container_of(breq, struct ahash_request, base);
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
+ struct rk_ahash_rctx *rctx = ahash_request_ctx(areq);
+ struct rk_ahash_ctx *tctx = crypto_ahash_ctx(tfm);
+ int ret;
+
+ ret = dma_map_sg(tctx->dev->dev, areq->src, sg_nents(areq->src), DMA_TO_DEVICE);
+ if (ret <= 0)
+ return -EINVAL;
+
+ rctx->nrsg = ret;
+
+ return 0;
+}
+
+static int rk_hash_unprepare(struct crypto_engine *engine, void *breq)
{
- int err;
+ struct ahash_request *areq = container_of(breq, struct ahash_request, base);
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
+ struct rk_ahash_rctx *rctx = ahash_request_ctx(areq);
+ struct rk_ahash_ctx *tctx = crypto_ahash_ctx(tfm);
- err = dev->load_data(dev, dev->sg_src, NULL);
- if (!err)
- crypto_ahash_dma_start(dev);
- return err;
+ dma_unmap_sg(tctx->dev->dev, areq->src, rctx->nrsg, DMA_TO_DEVICE);
+ return 0;
}
-static int rk_ahash_start(struct rk_crypto_info *dev)
+static int rk_hash_run(struct crypto_engine *engine, void *breq)
{
- struct ahash_request *req = ahash_request_cast(dev->async_req);
- struct crypto_ahash *tfm;
- struct rk_ahash_rctx *rctx;
-
- dev->total = req->nbytes;
- dev->left_bytes = req->nbytes;
- dev->sg_dst = NULL;
- dev->sg_src = req->src;
- dev->first = req->src;
- dev->src_nents = sg_nents(req->src);
- rctx = ahash_request_ctx(req);
+ struct ahash_request *areq = container_of(breq, struct ahash_request, base);
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
+ struct rk_ahash_rctx *rctx = ahash_request_ctx(areq);
+ struct rk_ahash_ctx *tctx = crypto_ahash_ctx(tfm);
+ struct scatterlist *sg = areq->src;
+ int err = 0;
+ int i;
+ u32 v;
+
rctx->mode = 0;
- tfm = crypto_ahash_reqtfm(req);
switch (crypto_ahash_digestsize(tfm)) {
case SHA1_DIGEST_SIZE:
rctx->mode = RK_CRYPTO_HASH_SHA1;
@@ -255,30 +267,26 @@ static int rk_ahash_start(struct rk_crypto_info *dev)
rctx->mode = RK_CRYPTO_HASH_MD5;
break;
default:
- return -EINVAL;
+ err = -EINVAL;
+ goto theend;
}
- rk_ahash_reg_init(dev);
- return rk_ahash_set_data_start(dev);
-}
+ rk_ahash_reg_init(areq);
-static int rk_ahash_crypto_rx(struct rk_crypto_info *dev)
-{
- int err = 0;
- struct ahash_request *req = ahash_request_cast(dev->async_req);
- struct crypto_ahash *tfm;
-
- dev->unload_data(dev);
- if (dev->left_bytes) {
- if (sg_is_last(dev->sg_src)) {
- dev_warn(dev->dev, "[%s:%d], Lack of data\n",
- __func__, __LINE__);
- err = -ENOMEM;
- goto out_rx;
+ while (sg) {
+ reinit_completion(&tctx->dev->complete);
+ tctx->dev->status = 0;
+ crypto_ahash_dma_start(tctx->dev, sg);
+ wait_for_completion_interruptible_timeout(&tctx->dev->complete,
+ msecs_to_jiffies(2000));
+ if (!tctx->dev->status) {
+ dev_err(tctx->dev->dev, "DMA timeout\n");
+ err = -EFAULT;
+ goto theend;
}
- dev->sg_src = sg_next(dev->sg_src);
- err = rk_ahash_set_data_start(dev);
- } else {
+ sg = sg_next(sg);
+ }
+
/*
* it will take some time to process date after last dma
* transmission.
@@ -289,18 +297,20 @@ static int rk_ahash_crypto_rx(struct rk_crypto_info *dev)
* efficiency, and make it response quickly when dma
* complete.
*/
- while (!CRYPTO_READ(dev, RK_CRYPTO_HASH_STS))
- udelay(10);
-
- tfm = crypto_ahash_reqtfm(req);
- memcpy_fromio(req->result, dev->reg + RK_CRYPTO_HASH_DOUT_0,
- crypto_ahash_digestsize(tfm));
- dev->complete(dev->async_req, 0);
- tasklet_schedule(&dev->queue_task);
+ while (!CRYPTO_READ(tctx->dev, RK_CRYPTO_HASH_STS))
+ udelay(10);
+
+ for (i = 0; i < crypto_ahash_digestsize(tfm) / 4; i++) {
+ v = readl(tctx->dev->reg + RK_CRYPTO_HASH_DOUT_0 + i * 4);
+ put_unaligned_le32(v, areq->result + i * 4);
}
-out_rx:
- return err;
+theend:
+ local_bh_disable();
+ crypto_finalize_hash_request(engine, breq, err);
+ local_bh_enable();
+
+ return 0;
}
static int rk_cra_hash_init(struct crypto_tfm *tfm)
@@ -314,9 +324,6 @@ static int rk_cra_hash_init(struct crypto_tfm *tfm)
algt = container_of(alg, struct rk_crypto_tmp, alg.hash);
tctx->dev = algt->dev;
- tctx->dev->start = rk_ahash_start;
- tctx->dev->update = rk_ahash_crypto_rx;
- tctx->dev->complete = rk_ahash_crypto_complete;
/* for fallback */
tctx->fallback_tfm = crypto_alloc_ahash(alg_name, 0,
@@ -325,10 +332,15 @@ static int rk_cra_hash_init(struct crypto_tfm *tfm)
dev_err(tctx->dev->dev, "Could not load fallback driver.\n");
return PTR_ERR(tctx->fallback_tfm);
}
+
crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
sizeof(struct rk_ahash_rctx) +
crypto_ahash_reqsize(tctx->fallback_tfm));
+ tctx->enginectx.op.do_one_request = rk_hash_run;
+ tctx->enginectx.op.prepare_request = rk_hash_prepare;
+ tctx->enginectx.op.unprepare_request = rk_hash_unprepare;
+
return 0;
}
diff --git a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
index d067b7f09165..67a7e05d5ae3 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
@@ -9,6 +9,7 @@
* Some ideas are from marvell-cesa.c and s5p-sss.c driver.
*/
#include <linux/device.h>
+#include <crypto/scatterwalk.h>
#include "rk3288_crypto.h"
#define RK_CRYPTO_DEC BIT(0)
@@ -70,19 +71,15 @@ static int rk_cipher_fallback(struct skcipher_request *areq)
return err;
}
-static void rk_crypto_complete(struct crypto_async_request *base, int err)
-{
- if (base->complete)
- base->complete(base, err);
-}
-
static int rk_handle_req(struct rk_crypto_info *dev,
struct skcipher_request *req)
{
+ struct crypto_engine *engine = dev->engine;
+
if (rk_cipher_need_fallback(req))
return rk_cipher_fallback(req);
- return dev->enqueue(dev, &req->base);
+ return crypto_transfer_skcipher_request_to_engine(engine, req);
}
static int rk_aes_setkey(struct crypto_skcipher *cipher,
@@ -265,25 +262,21 @@ static int rk_des3_ede_cbc_decrypt(struct skcipher_request *req)
return rk_handle_req(dev, req);
}
-static void rk_ablk_hw_init(struct rk_crypto_info *dev)
+static void rk_ablk_hw_init(struct rk_crypto_info *dev, struct skcipher_request *req)
{
- struct skcipher_request *req =
- skcipher_request_cast(dev->async_req);
struct crypto_skcipher *cipher = crypto_skcipher_reqtfm(req);
struct crypto_tfm *tfm = crypto_skcipher_tfm(cipher);
struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(cipher);
- u32 ivsize, block, conf_reg = 0;
+ u32 block, conf_reg = 0;
block = crypto_tfm_alg_blocksize(tfm);
- ivsize = crypto_skcipher_ivsize(cipher);
if (block == DES_BLOCK_SIZE) {
rctx->mode |= RK_CRYPTO_TDES_FIFO_MODE |
RK_CRYPTO_TDES_BYTESWAP_KEY |
RK_CRYPTO_TDES_BYTESWAP_IV;
CRYPTO_WRITE(dev, RK_CRYPTO_TDES_CTRL, rctx->mode);
- memcpy_toio(dev->reg + RK_CRYPTO_TDES_IV_0, req->iv, ivsize);
memcpy_toio(ctx->dev->reg + RK_CRYPTO_TDES_KEY1_0, ctx->key, ctx->keylen);
conf_reg = RK_CRYPTO_DESSEL;
} else {
@@ -296,7 +289,6 @@ static void rk_ablk_hw_init(struct rk_crypto_info *dev)
else if (ctx->keylen == AES_KEYSIZE_256)
rctx->mode |= RK_CRYPTO_AES_256BIT_key;
CRYPTO_WRITE(dev, RK_CRYPTO_AES_CTRL, rctx->mode);
- memcpy_toio(dev->reg + RK_CRYPTO_AES_IV_0, req->iv, ivsize);
memcpy_toio(ctx->dev->reg + RK_CRYPTO_AES_KEY_0, ctx->key, ctx->keylen);
}
conf_reg |= RK_CRYPTO_BYTESWAP_BTFIFO |
@@ -306,133 +298,138 @@ static void rk_ablk_hw_init(struct rk_crypto_info *dev)
RK_CRYPTO_BCDMA_ERR_ENA | RK_CRYPTO_BCDMA_DONE_ENA);
}
-static void crypto_dma_start(struct rk_crypto_info *dev)
+static void crypto_dma_start(struct rk_crypto_info *dev,
+ struct scatterlist *sgs,
+ struct scatterlist *sgd, unsigned int todo)
{
- CRYPTO_WRITE(dev, RK_CRYPTO_BRDMAS, dev->addr_in);
- CRYPTO_WRITE(dev, RK_CRYPTO_BRDMAL, dev->count / 4);
- CRYPTO_WRITE(dev, RK_CRYPTO_BTDMAS, dev->addr_out);
+ CRYPTO_WRITE(dev, RK_CRYPTO_BRDMAS, sg_dma_address(sgs));
+ CRYPTO_WRITE(dev, RK_CRYPTO_BRDMAL, todo);
+ CRYPTO_WRITE(dev, RK_CRYPTO_BTDMAS, sg_dma_address(sgd));
CRYPTO_WRITE(dev, RK_CRYPTO_CTRL, RK_CRYPTO_BLOCK_START |
_SBF(RK_CRYPTO_BLOCK_START, 16));
}
-static int rk_set_data_start(struct rk_crypto_info *dev)
+static int rk_cipher_run(struct crypto_engine *engine, void *async_req)
{
- int err;
- struct skcipher_request *req =
- skcipher_request_cast(dev->async_req);
- struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
- struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
+ struct skcipher_request *areq = container_of(async_req, struct skcipher_request, base);
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(areq);
struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
- u32 ivsize = crypto_skcipher_ivsize(tfm);
- u8 *src_last_blk = page_address(sg_page(dev->sg_src)) +
- dev->sg_src->offset + dev->sg_src->length - ivsize;
-
- /* Store the iv that need to be updated in chain mode.
- * And update the IV buffer to contain the next IV for decryption mode.
- */
- if (rctx->mode & RK_CRYPTO_DEC) {
- memcpy(ctx->iv, src_last_blk, ivsize);
- sg_pcopy_to_buffer(dev->first, dev->src_nents, req->iv,
- ivsize, dev->total - ivsize);
- }
-
- err = dev->load_data(dev, dev->sg_src, dev->sg_dst);
- if (!err)
- crypto_dma_start(dev);
- return err;
-}
-
-static int rk_ablk_start(struct rk_crypto_info *dev)
-{
- struct skcipher_request *req =
- skcipher_request_cast(dev->async_req);
- unsigned long flags;
+ struct rk_cipher_rctx *rctx = skcipher_request_ctx(areq);
+ struct scatterlist *sgs, *sgd;
int err = 0;
+ int ivsize = crypto_skcipher_ivsize(tfm);
+ int offset;
+ u8 iv[AES_BLOCK_SIZE];
+ u8 biv[AES_BLOCK_SIZE];
+ u8 *ivtouse = areq->iv;
+ unsigned int len = areq->cryptlen;
+ unsigned int todo;
+
+ ivsize = crypto_skcipher_ivsize(tfm);
+ if (areq->iv && crypto_skcipher_ivsize(tfm) > 0) {
+ if (rctx->mode & RK_CRYPTO_DEC) {
+ offset = areq->cryptlen - ivsize;
+ scatterwalk_map_and_copy(rctx->backup_iv, areq->src,
+ offset, ivsize, 0);
+ }
+ }
- dev->left_bytes = req->cryptlen;
- dev->total = req->cryptlen;
- dev->sg_src = req->src;
- dev->first = req->src;
- dev->src_nents = sg_nents(req->src);
- dev->sg_dst = req->dst;
- dev->dst_nents = sg_nents(req->dst);
-
- spin_lock_irqsave(&dev->lock, flags);
- rk_ablk_hw_init(dev);
- err = rk_set_data_start(dev);
- spin_unlock_irqrestore(&dev->lock, flags);
- return err;
-}
-
-static void rk_iv_copyback(struct rk_crypto_info *dev)
-{
- struct skcipher_request *req =
- skcipher_request_cast(dev->async_req);
- struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
- struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
- struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
- u32 ivsize = crypto_skcipher_ivsize(tfm);
+ sgs = areq->src;
+ sgd = areq->dst;
- /* Update the IV buffer to contain the next IV for encryption mode. */
- if (!(rctx->mode & RK_CRYPTO_DEC)) {
- memcpy(req->iv,
- sg_virt(dev->sg_dst) + dev->sg_dst->length - ivsize,
- ivsize);
+ while (sgs && sgd && len) {
+ if (!sgs->length) {
+ sgs = sg_next(sgs);
+ sgd = sg_next(sgd);
+ continue;
+ }
+ if (rctx->mode & RK_CRYPTO_DEC) {
+ /* we backup last block of source to be used as IV at next step */
+ offset = sgs->length - ivsize;
+ scatterwalk_map_and_copy(biv, sgs, offset, ivsize, 0);
+ }
+ if (sgs == sgd) {
+ err = dma_map_sg(ctx->dev->dev, sgs, 1, DMA_BIDIRECTIONAL);
+ if (err <= 0) {
+ err = -EINVAL;
+ goto theend_iv;
+ }
+ } else {
+ err = dma_map_sg(ctx->dev->dev, sgs, 1, DMA_TO_DEVICE);
+ if (err <= 0) {
+ err = -EINVAL;
+ goto theend_iv;
+ }
+ err = dma_map_sg(ctx->dev->dev, sgd, 1, DMA_FROM_DEVICE);
+ if (err <= 0) {
+ err = -EINVAL;
+ goto theend_sgs;
+ }
+ }
+ err = 0;
+ rk_ablk_hw_init(ctx->dev, areq);
+ if (ivsize) {
+ if (ivsize == DES_BLOCK_SIZE)
+ memcpy_toio(ctx->dev->reg + RK_CRYPTO_TDES_IV_0, ivtouse, ivsize);
+ else
+ memcpy_toio(ctx->dev->reg + RK_CRYPTO_AES_IV_0, ivtouse, ivsize);
+ }
+ reinit_completion(&ctx->dev->complete);
+ ctx->dev->status = 0;
+
+ todo = min(sg_dma_len(sgs), len);
+ len -= todo;
+ crypto_dma_start(ctx->dev, sgs, sgd, todo / 4);
+ wait_for_completion_interruptible_timeout(&ctx->dev->complete,
+ msecs_to_jiffies(2000));
+ if (!ctx->dev->status) {
+ dev_err(ctx->dev->dev, "DMA timeout\n");
+ err = -EFAULT;
+ goto theend;
+ }
+ if (sgs == sgd) {
+ dma_unmap_sg(ctx->dev->dev, sgs, 1, DMA_BIDIRECTIONAL);
+ } else {
+ dma_unmap_sg(ctx->dev->dev, sgs, 1, DMA_TO_DEVICE);
+ dma_unmap_sg(ctx->dev->dev, sgd, 1, DMA_FROM_DEVICE);
+ }
+ if (rctx->mode & RK_CRYPTO_DEC) {
+ memcpy(iv, biv, ivsize);
+ ivtouse = iv;
+ } else {
+ offset = sgd->length - ivsize;
+ scatterwalk_map_and_copy(iv, sgd, offset, ivsize, 0);
+ ivtouse = iv;
+ }
+ sgs = sg_next(sgs);
+ sgd = sg_next(sgd);
}
-}
-
-static void rk_update_iv(struct rk_crypto_info *dev)
-{
- struct skcipher_request *req =
- skcipher_request_cast(dev->async_req);
- struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
- struct rk_cipher_rctx *rctx = skcipher_request_ctx(req);
- struct rk_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
- u32 ivsize = crypto_skcipher_ivsize(tfm);
- u8 *new_iv = NULL;
- if (rctx->mode & RK_CRYPTO_DEC) {
- new_iv = ctx->iv;
- } else {
- new_iv = page_address(sg_page(dev->sg_dst)) +
- dev->sg_dst->offset + dev->sg_dst->length - ivsize;
+ if (areq->iv && ivsize > 0) {
+ offset = areq->cryptlen - ivsize;
+ if (rctx->mode & RK_CRYPTO_DEC) {
+ memcpy(areq->iv, rctx->backup_iv, ivsize);
+ memzero_explicit(rctx->backup_iv, ivsize);
+ } else {
+ scatterwalk_map_and_copy(areq->iv, areq->dst, offset,
+ ivsize, 0);
+ }
}
- if (ivsize == DES_BLOCK_SIZE)
- memcpy_toio(dev->reg + RK_CRYPTO_TDES_IV_0, new_iv, ivsize);
- else if (ivsize == AES_BLOCK_SIZE)
- memcpy_toio(dev->reg + RK_CRYPTO_AES_IV_0, new_iv, ivsize);
-}
+theend:
+ local_bh_disable();
+ crypto_finalize_skcipher_request(engine, areq, err);
+ local_bh_enable();
+ return 0;
-/* return:
- * true some err was occurred
- * fault no err, continue
- */
-static int rk_ablk_rx(struct rk_crypto_info *dev)
-{
- int err = 0;
- struct skcipher_request *req =
- skcipher_request_cast(dev->async_req);
-
- dev->unload_data(dev);
- if (dev->left_bytes) {
- rk_update_iv(dev);
- if (sg_is_last(dev->sg_src)) {
- dev_err(dev->dev, "[%s:%d] Lack of data\n",
- __func__, __LINE__);
- err = -ENOMEM;
- goto out_rx;
- }
- dev->sg_src = sg_next(dev->sg_src);
- dev->sg_dst = sg_next(dev->sg_dst);
- err = rk_set_data_start(dev);
+theend_sgs:
+ if (sgs == sgd) {
+ dma_unmap_sg(ctx->dev->dev, sgs, 1, DMA_BIDIRECTIONAL);
} else {
- rk_iv_copyback(dev);
- /* here show the calculation is over without any err */
- dev->complete(dev->async_req, 0);
- tasklet_schedule(&dev->queue_task);
+ dma_unmap_sg(ctx->dev->dev, sgs, 1, DMA_TO_DEVICE);
+ dma_unmap_sg(ctx->dev->dev, sgd, 1, DMA_FROM_DEVICE);
}
-out_rx:
+theend_iv:
return err;
}
@@ -446,9 +443,6 @@ static int rk_ablk_init_tfm(struct crypto_skcipher *tfm)
algt = container_of(alg, struct rk_crypto_tmp, alg.skcipher);
ctx->dev = algt->dev;
- ctx->dev->start = rk_ablk_start;
- ctx->dev->update = rk_ablk_rx;
- ctx->dev->complete = rk_crypto_complete;
ctx->fallback_tfm = crypto_alloc_skcipher(name, 0, CRYPTO_ALG_NEED_FALLBACK);
if (IS_ERR(ctx->fallback_tfm)) {
@@ -460,6 +454,8 @@ static int rk_ablk_init_tfm(struct crypto_skcipher *tfm)
tfm->reqsize = sizeof(struct rk_cipher_rctx) +
crypto_skcipher_reqsize(ctx->fallback_tfm);
+ ctx->enginectx.op.do_one_request = rk_cipher_run;
+
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 377/731] apparmor: Fix memleak in alloc_ns()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (375 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 376/731] crypto: rockchip - rework by using crypto_engine Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 378/731] f2fs: fix to invalidate dcc->f2fs_issue_discard in error path Greg Kroah-Hartman
` (364 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiu Jianfeng, John Johansen, Sasha Levin
From: Xiu Jianfeng <xiujianfeng@huawei.com>
[ Upstream commit e9e6fa49dbab6d84c676666f3fe7d360497fd65b ]
After changes in commit a1bd627b46d1 ("apparmor: share profile name on
replacement"), the hname member of struct aa_policy is not valid slab
object, but a subset of that, it can not be freed by kfree_sensitive(),
use aa_policy_destroy() to fix it.
Fixes: a1bd627b46d1 ("apparmor: share profile name on replacement")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/apparmor/policy_ns.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/security/apparmor/policy_ns.c b/security/apparmor/policy_ns.c
index 70921d95fb40..53d24cf63893 100644
--- a/security/apparmor/policy_ns.c
+++ b/security/apparmor/policy_ns.c
@@ -121,7 +121,7 @@ static struct aa_ns *alloc_ns(const char *prefix, const char *name)
return ns;
fail_unconfined:
- kfree_sensitive(ns->base.hname);
+ aa_policy_destroy(&ns->base);
fail_ns:
kfree_sensitive(ns);
return NULL;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 378/731] f2fs: fix to invalidate dcc->f2fs_issue_discard in error path
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (376 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 377/731] apparmor: Fix memleak in alloc_ns() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 379/731] f2fs: fix normal discard process Greg Kroah-Hartman
` (363 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+035a381ea1afb63f098d,
syzbot+729c925c2d9fc495ddee, Chao Yu, Jaegeuk Kim, Sasha Levin
From: Chao Yu <chao@kernel.org>
[ Upstream commit 91586ce0d39a05f88795aa8814fb99b1387236b3 ]
Syzbot reports a NULL pointer dereference issue as below:
__refcount_add include/linux/refcount.h:193 [inline]
__refcount_inc include/linux/refcount.h:250 [inline]
refcount_inc include/linux/refcount.h:267 [inline]
get_task_struct include/linux/sched/task.h:110 [inline]
kthread_stop+0x34/0x1c0 kernel/kthread.c:703
f2fs_stop_discard_thread+0x3c/0x5c fs/f2fs/segment.c:1638
kill_f2fs_super+0x5c/0x194 fs/f2fs/super.c:4522
deactivate_locked_super+0x70/0xe8 fs/super.c:332
deactivate_super+0xd0/0xd4 fs/super.c:363
cleanup_mnt+0x1f8/0x234 fs/namespace.c:1186
__cleanup_mnt+0x20/0x30 fs/namespace.c:1193
task_work_run+0xc4/0x14c kernel/task_work.c:177
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0x26c/0xbe0 kernel/exit.c:795
do_group_exit+0x60/0xe8 kernel/exit.c:925
__do_sys_exit_group kernel/exit.c:936 [inline]
__se_sys_exit_group kernel/exit.c:934 [inline]
__wake_up_parent+0x0/0x40 kernel/exit.c:934
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:52 [inline]
el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206
el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654
el0t_64_sync+0x18c/0x190 arch/arm64/kernel/entry.S:581
The root cause of this issue is in error path of f2fs_start_discard_thread(),
it missed to invalidate dcc->f2fs_issue_discard, later kthread_stop() may
access invalid pointer.
Fixes: 4d67490498ac ("f2fs: Don't create discard thread when device doesn't support realtime discard")
Reported-by: syzbot+035a381ea1afb63f098d@syzkaller.appspotmail.com
Reported-by: syzbot+729c925c2d9fc495ddee@syzkaller.appspotmail.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/f2fs/segment.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index af810b2d5d90..28939e3573ea 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -2129,8 +2129,10 @@ int f2fs_start_discard_thread(struct f2fs_sb_info *sbi)
dcc->f2fs_issue_discard = kthread_run(issue_discard_thread, sbi,
"f2fs_discard-%u:%u", MAJOR(dev), MINOR(dev));
- if (IS_ERR(dcc->f2fs_issue_discard))
+ if (IS_ERR(dcc->f2fs_issue_discard)) {
err = PTR_ERR(dcc->f2fs_issue_discard);
+ dcc->f2fs_issue_discard = NULL;
+ }
return err;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 379/731] f2fs: fix normal discard process
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (377 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 378/731] f2fs: fix to invalidate dcc->f2fs_issue_discard in error path Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 380/731] f2fs: fix to destroy sbi->post_read_wq in error path of f2fs_fill_super() Greg Kroah-Hartman
` (362 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dongdong Zhang, Chao Yu,
Jaegeuk Kim, Sasha Levin
From: Dongdong Zhang <zhangdongdong1@oppo.com>
[ Upstream commit b5f1a218ae5e4339130d6e733f0e63d623e09a2c ]
In the DPOLICY_BG mode, there is a conflict between
the two conditions "i + 1 < dpolicy->granularity" and
"i < DEFAULT_DISCARD_GRANULARITY". If i = 15, the first
condition is false, it will enter the second condition
and dispatch all small granularity discards in function
__issue_discard_cmd_orderly. The restrictive effect
of the first condition to small discards will be
invalidated. These two conditions should align.
Fixes: 20ee4382322c ("f2fs: issue small discard by LBA order")
Signed-off-by: Dongdong Zhang <zhangdongdong1@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/f2fs/segment.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 28939e3573ea..194c0811fbdf 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -1551,7 +1551,7 @@ static int __issue_discard_cmd(struct f2fs_sb_info *sbi,
if (i + 1 < dpolicy->granularity)
break;
- if (i < DEFAULT_DISCARD_GRANULARITY && dpolicy->ordered)
+ if (i + 1 < DEFAULT_DISCARD_GRANULARITY && dpolicy->ordered)
return __issue_discard_cmd_orderly(sbi, dpolicy);
pend_list = &dcc->pend_list[i];
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 380/731] f2fs: fix to destroy sbi->post_read_wq in error path of f2fs_fill_super()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (378 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 379/731] f2fs: fix normal discard process Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 381/731] RDMA/irdma: Report the correct link speed Greg Kroah-Hartman
` (361 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Chao Yu, Jaegeuk Kim, Sasha Levin
From: Chao Yu <chao@kernel.org>
[ Upstream commit 7b02b2201893a71b881026cf574902019ab00db5 ]
In error path of f2fs_fill_super(), this patch fixes to call
f2fs_destroy_post_read_wq() once if we fail in f2fs_start_ckpt_thread().
Fixes: 261eeb9c1585 ("f2fs: introduce checkpoint_merge mount option")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/f2fs/super.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index a0d1ef73b83e..f4e8de1f4789 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -4428,9 +4428,9 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent)
f2fs_destroy_node_manager(sbi);
free_sm:
f2fs_destroy_segment_manager(sbi);
- f2fs_destroy_post_read_wq(sbi);
stop_ckpt_thread:
f2fs_stop_ckpt_thread(sbi);
+ f2fs_destroy_post_read_wq(sbi);
free_devices:
destroy_device_list(sbi);
kvfree(sbi->ckpt);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 381/731] RDMA/irdma: Report the correct link speed
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (379 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 380/731] f2fs: fix to destroy sbi->post_read_wq in error path of f2fs_fill_super() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 382/731] scsi: qla2xxx: Fix set-but-not-used variable warnings Greg Kroah-Hartman
` (360 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kamal Heib, Shiraz Saleem,
Leon Romanovsky, Sasha Levin
From: Shiraz Saleem <shiraz.saleem@intel.com>
[ Upstream commit 4eace75e0853273755b878ffa9cce6de84df975a ]
The active link speed is currently hard-coded in irdma_query_port due
to which the port rate in ibstatus does reflect the active link speed.
Call ib_get_eth_speed in irdma_query_port to get the active link speed.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Reported-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20221104234957.1135-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/irdma/verbs.c | 35 +++--------------------------
1 file changed, 3 insertions(+), 32 deletions(-)
diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c
index 911902d2b93e..c5971a840b87 100644
--- a/drivers/infiniband/hw/irdma/verbs.c
+++ b/drivers/infiniband/hw/irdma/verbs.c
@@ -60,36 +60,6 @@ static int irdma_query_device(struct ib_device *ibdev,
return 0;
}
-/**
- * irdma_get_eth_speed_and_width - Get IB port speed and width from netdev speed
- * @link_speed: netdev phy link speed
- * @active_speed: IB port speed
- * @active_width: IB port width
- */
-static void irdma_get_eth_speed_and_width(u32 link_speed, u16 *active_speed,
- u8 *active_width)
-{
- if (link_speed <= SPEED_1000) {
- *active_width = IB_WIDTH_1X;
- *active_speed = IB_SPEED_SDR;
- } else if (link_speed <= SPEED_10000) {
- *active_width = IB_WIDTH_1X;
- *active_speed = IB_SPEED_FDR10;
- } else if (link_speed <= SPEED_20000) {
- *active_width = IB_WIDTH_4X;
- *active_speed = IB_SPEED_DDR;
- } else if (link_speed <= SPEED_25000) {
- *active_width = IB_WIDTH_1X;
- *active_speed = IB_SPEED_EDR;
- } else if (link_speed <= SPEED_40000) {
- *active_width = IB_WIDTH_4X;
- *active_speed = IB_SPEED_FDR10;
- } else {
- *active_width = IB_WIDTH_4X;
- *active_speed = IB_SPEED_EDR;
- }
-}
-
/**
* irdma_query_port - get port attributes
* @ibdev: device pointer from stack
@@ -117,8 +87,9 @@ static int irdma_query_port(struct ib_device *ibdev, u32 port,
props->state = IB_PORT_DOWN;
props->phys_state = IB_PORT_PHYS_STATE_DISABLED;
}
- irdma_get_eth_speed_and_width(SPEED_100000, &props->active_speed,
- &props->active_width);
+
+ ib_get_eth_speed(ibdev, port, &props->active_speed,
+ &props->active_width);
if (rdma_protocol_roce(ibdev, 1)) {
props->gid_tbl_len = 32;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 382/731] scsi: qla2xxx: Fix set-but-not-used variable warnings
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (380 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 381/731] RDMA/irdma: Report the correct link speed Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 383/731] RDMA/siw: Fix immediate work request flush to completion queue Greg Kroah-Hartman
` (359 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arun Easi, Giridhar Malavali,
Bart Van Assche, Martin K. Petersen, Sasha Levin
From: Bart Van Assche <bvanassche@acm.org>
[ Upstream commit 4fb2169d66b837a2986f569f5d5b81f79e6e4a4c ]
Fix the following two compiler warnings:
drivers/scsi/qla2xxx/qla_init.c: In function ‘qla24xx_async_abort_cmd’:
drivers/scsi/qla2xxx/qla_init.c:171:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
171 | uint8_t bail;
| ^~~~
drivers/scsi/qla2xxx/qla_init.c: In function ‘qla2x00_async_tm_cmd’:
drivers/scsi/qla2xxx/qla_init.c:2023:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
2023 | uint8_t bail;
| ^~~~
Cc: Arun Easi <arun.easi@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Fixes: feafb7b1714c ("[SCSI] qla2xxx: Fix vport delete issues")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224818.2607882-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/qla2xxx/qla_def.h | 22 +++++++++++-----------
drivers/scsi/qla2xxx/qla_init.c | 6 ++----
drivers/scsi/qla2xxx/qla_inline.h | 4 +---
drivers/scsi/qla2xxx/qla_os.c | 4 +---
4 files changed, 15 insertions(+), 21 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 51c7ce5f9792..307ffdfe048b 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -5117,17 +5117,17 @@ struct secure_flash_update_block_pk {
(test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \
test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
-#define QLA_VHA_MARK_BUSY(__vha, __bail) do { \
- atomic_inc(&__vha->vref_count); \
- mb(); \
- if (__vha->flags.delete_progress) { \
- atomic_dec(&__vha->vref_count); \
- wake_up(&__vha->vref_waitq); \
- __bail = 1; \
- } else { \
- __bail = 0; \
- } \
-} while (0)
+static inline bool qla_vha_mark_busy(scsi_qla_host_t *vha)
+{
+ atomic_inc(&vha->vref_count);
+ mb();
+ if (vha->flags.delete_progress) {
+ atomic_dec(&vha->vref_count);
+ wake_up(&vha->vref_waitq);
+ return true;
+ }
+ return false;
+}
#define QLA_VHA_MARK_NOT_BUSY(__vha) do { \
atomic_dec(&__vha->vref_count); \
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index b81797a3ab61..46b3b31a41bd 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -168,7 +168,6 @@ int qla24xx_async_abort_cmd(srb_t *cmd_sp, bool wait)
struct srb_iocb *abt_iocb;
srb_t *sp;
int rval = QLA_FUNCTION_FAILED;
- uint8_t bail;
/* ref: INIT for ABTS command */
sp = qla2xxx_get_qpair_sp(cmd_sp->vha, cmd_sp->qpair, cmd_sp->fcport,
@@ -176,7 +175,7 @@ int qla24xx_async_abort_cmd(srb_t *cmd_sp, bool wait)
if (!sp)
return QLA_MEMORY_ALLOC_FAILED;
- QLA_VHA_MARK_BUSY(vha, bail);
+ qla_vha_mark_busy(vha);
abt_iocb = &sp->u.iocb_cmd;
sp->type = SRB_ABT_CMD;
sp->name = "abort";
@@ -2022,14 +2021,13 @@ qla2x00_async_tm_cmd(fc_port_t *fcport, uint32_t flags, uint32_t lun,
struct srb_iocb *tm_iocb;
srb_t *sp;
int rval = QLA_FUNCTION_FAILED;
- uint8_t bail;
/* ref: INIT */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
- QLA_VHA_MARK_BUSY(vha, bail);
+ qla_vha_mark_busy(vha);
sp->type = SRB_TM_CMD;
sp->name = "tmf";
qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha),
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index db17f7f410cd..5185dc5daf80 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -225,11 +225,9 @@ static inline srb_t *
qla2x00_get_sp(scsi_qla_host_t *vha, fc_port_t *fcport, gfp_t flag)
{
srb_t *sp = NULL;
- uint8_t bail;
struct qla_qpair *qpair;
- QLA_VHA_MARK_BUSY(vha, bail);
- if (unlikely(bail))
+ if (unlikely(qla_vha_mark_busy(vha)))
return NULL;
qpair = vha->hw->base_qpair;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 00e97f0a07eb..05d827227d0b 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -5043,13 +5043,11 @@ struct qla_work_evt *
qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type)
{
struct qla_work_evt *e;
- uint8_t bail;
if (test_bit(UNLOADING, &vha->dpc_flags))
return NULL;
- QLA_VHA_MARK_BUSY(vha, bail);
- if (bail)
+ if (qla_vha_mark_busy(vha))
return NULL;
e = kzalloc(sizeof(struct qla_work_evt), GFP_ATOMIC);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 383/731] RDMA/siw: Fix immediate work request flush to completion queue
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (381 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 382/731] scsi: qla2xxx: Fix set-but-not-used variable warnings Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 384/731] IB/mad: Dont call to function that might sleep while in atomic context Greg Kroah-Hartman
` (358 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Olga Kornievskaia, Tom Talpey,
Bernard Metzler, Leon Romanovsky, Sasha Levin
From: Bernard Metzler <bmt@zurich.ibm.com>
[ Upstream commit bdf1da5df9da680589a7f74448dd0a94dd3e1446 ]
Correctly set send queue element opcode during immediate work request
flushing in post sendqueue operation, if the QP is in ERROR state.
An undefined ocode value results in out-of-bounds access to an array
for mapping the opcode between siw internal and RDMA core representation
in work completion generation. It resulted in a KASAN BUG report
of type 'global-out-of-bounds' during NFSoRDMA testing.
This patch further fixes a potential case of a malicious user which may
write undefined values for completion queue elements status or opcode,
if the CQ is memory mapped to user land. It avoids the same out-of-bounds
access to arrays for status and opcode mapping as described above.
Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Fixes: b0fff7317bb4 ("rdma/siw: completion queue methods")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20221107145057.895747-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/sw/siw/siw_cq.c | 24 ++++++++++++++--
drivers/infiniband/sw/siw/siw_verbs.c | 40 ++++++++++++++++++++++++---
2 files changed, 58 insertions(+), 6 deletions(-)
diff --git a/drivers/infiniband/sw/siw/siw_cq.c b/drivers/infiniband/sw/siw/siw_cq.c
index d68e37859e73..acc7bcd538b5 100644
--- a/drivers/infiniband/sw/siw/siw_cq.c
+++ b/drivers/infiniband/sw/siw/siw_cq.c
@@ -56,8 +56,6 @@ int siw_reap_cqe(struct siw_cq *cq, struct ib_wc *wc)
if (READ_ONCE(cqe->flags) & SIW_WQE_VALID) {
memset(wc, 0, sizeof(*wc));
wc->wr_id = cqe->id;
- wc->status = map_cqe_status[cqe->status].ib;
- wc->opcode = map_wc_opcode[cqe->opcode];
wc->byte_len = cqe->bytes;
/*
@@ -71,10 +69,32 @@ int siw_reap_cqe(struct siw_cq *cq, struct ib_wc *wc)
wc->wc_flags = IB_WC_WITH_INVALIDATE;
}
wc->qp = cqe->base_qp;
+ wc->opcode = map_wc_opcode[cqe->opcode];
+ wc->status = map_cqe_status[cqe->status].ib;
siw_dbg_cq(cq,
"idx %u, type %d, flags %2x, id 0x%pK\n",
cq->cq_get % cq->num_cqe, cqe->opcode,
cqe->flags, (void *)(uintptr_t)cqe->id);
+ } else {
+ /*
+ * A malicious user may set invalid opcode or
+ * status in the user mmapped CQE array.
+ * Sanity check and correct values in that case
+ * to avoid out-of-bounds access to global arrays
+ * for opcode and status mapping.
+ */
+ u8 opcode = cqe->opcode;
+ u16 status = cqe->status;
+
+ if (opcode >= SIW_NUM_OPCODES) {
+ opcode = 0;
+ status = IB_WC_GENERAL_ERR;
+ } else if (status >= SIW_NUM_WC_STATUS) {
+ status = IB_WC_GENERAL_ERR;
+ }
+ wc->opcode = map_wc_opcode[opcode];
+ wc->status = map_cqe_status[status].ib;
+
}
WRITE_ONCE(cqe->flags, 0);
cq->cq_get++;
diff --git a/drivers/infiniband/sw/siw/siw_verbs.c b/drivers/infiniband/sw/siw/siw_verbs.c
index ff33659acffa..9c7fbda9e068 100644
--- a/drivers/infiniband/sw/siw/siw_verbs.c
+++ b/drivers/infiniband/sw/siw/siw_verbs.c
@@ -674,13 +674,45 @@ static int siw_copy_inline_sgl(const struct ib_send_wr *core_wr,
static int siw_sq_flush_wr(struct siw_qp *qp, const struct ib_send_wr *wr,
const struct ib_send_wr **bad_wr)
{
- struct siw_sqe sqe = {};
int rv = 0;
while (wr) {
- sqe.id = wr->wr_id;
- sqe.opcode = wr->opcode;
- rv = siw_sqe_complete(qp, &sqe, 0, SIW_WC_WR_FLUSH_ERR);
+ struct siw_sqe sqe = {};
+
+ switch (wr->opcode) {
+ case IB_WR_RDMA_WRITE:
+ sqe.opcode = SIW_OP_WRITE;
+ break;
+ case IB_WR_RDMA_READ:
+ sqe.opcode = SIW_OP_READ;
+ break;
+ case IB_WR_RDMA_READ_WITH_INV:
+ sqe.opcode = SIW_OP_READ_LOCAL_INV;
+ break;
+ case IB_WR_SEND:
+ sqe.opcode = SIW_OP_SEND;
+ break;
+ case IB_WR_SEND_WITH_IMM:
+ sqe.opcode = SIW_OP_SEND_WITH_IMM;
+ break;
+ case IB_WR_SEND_WITH_INV:
+ sqe.opcode = SIW_OP_SEND_REMOTE_INV;
+ break;
+ case IB_WR_LOCAL_INV:
+ sqe.opcode = SIW_OP_INVAL_STAG;
+ break;
+ case IB_WR_REG_MR:
+ sqe.opcode = SIW_OP_REG_MR;
+ break;
+ default:
+ rv = -EINVAL;
+ break;
+ }
+ if (!rv) {
+ sqe.id = wr->wr_id;
+ rv = siw_sqe_complete(qp, &sqe, 0,
+ SIW_WC_WR_FLUSH_ERR);
+ }
if (rv) {
if (bad_wr)
*bad_wr = wr;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 384/731] IB/mad: Dont call to function that might sleep while in atomic context
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (382 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 383/731] RDMA/siw: Fix immediate work request flush to completion queue Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 385/731] PCI: vmd: Disable MSI remapping after suspend Greg Kroah-Hartman
` (357 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Leonid Ravich, Leon Romanovsky, Sasha Levin
From: Leonid Ravich <lravich@gmail.com>
[ Upstream commit 5c20311d76cbaeb7ed2ecf9c8b8322f8fc4a7ae3 ]
Tracepoints are not allowed to sleep, as such the following splat is
generated due to call to ib_query_pkey() in atomic context.
WARNING: CPU: 0 PID: 1888000 at kernel/trace/ring_buffer.c:2492 rb_commit+0xc1/0x220
CPU: 0 PID: 1888000 Comm: kworker/u9:0 Kdump: loaded Tainted: G OE --------- - - 4.18.0-305.3.1.el8.x86_64 #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module_el8.3.0+555+a55c8938 04/01/2014
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
RIP: 0010:rb_commit+0xc1/0x220
RSP: 0000:ffffa8ac80f9bca0 EFLAGS: 00010202
RAX: ffff8951c7c01300 RBX: ffff8951c7c14a00 RCX: 0000000000000246
RDX: ffff8951c707c000 RSI: ffff8951c707c57c RDI: ffff8951c7c14a00
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8951c7c01300 R11: 0000000000000001 R12: 0000000000000246
R13: 0000000000000000 R14: ffffffff964c70c0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8951fbc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f20e8f39010 CR3: 000000002ca10005 CR4: 0000000000170ef0
Call Trace:
ring_buffer_unlock_commit+0x1d/0xa0
trace_buffer_unlock_commit_regs+0x3b/0x1b0
trace_event_buffer_commit+0x67/0x1d0
trace_event_raw_event_ib_mad_recv_done_handler+0x11c/0x160 [ib_core]
ib_mad_recv_done+0x48b/0xc10 [ib_core]
? trace_event_raw_event_cq_poll+0x6f/0xb0 [ib_core]
__ib_process_cq+0x91/0x1c0 [ib_core]
ib_cq_poll_work+0x26/0x80 [ib_core]
process_one_work+0x1a7/0x360
? create_worker+0x1a0/0x1a0
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x35/0x40
---[ end trace 78ba8509d3830a16 ]---
Fixes: 821bf1de45a1 ("IB/MAD: Add recv path trace point")
Signed-off-by: Leonid Ravich <lravich@gmail.com>
Link: https://lore.kernel.org/r/Y2t5feomyznrVj7V@leonid-Inspiron-3421
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/core/mad.c | 5 -----
include/trace/events/ib_mad.h | 13 ++++---------
2 files changed, 4 insertions(+), 14 deletions(-)
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 1893aa613ad7..674344eb8e2f 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -59,9 +59,6 @@ static void create_mad_addr_info(struct ib_mad_send_wr_private *mad_send_wr,
struct ib_mad_qp_info *qp_info,
struct trace_event_raw_ib_mad_send_template *entry)
{
- u16 pkey;
- struct ib_device *dev = qp_info->port_priv->device;
- u32 pnum = qp_info->port_priv->port_num;
struct ib_ud_wr *wr = &mad_send_wr->send_wr;
struct rdma_ah_attr attr = {};
@@ -69,8 +66,6 @@ static void create_mad_addr_info(struct ib_mad_send_wr_private *mad_send_wr,
/* These are common */
entry->sl = attr.sl;
- ib_query_pkey(dev, pnum, wr->pkey_index, &pkey);
- entry->pkey = pkey;
entry->rqpn = wr->remote_qpn;
entry->rqkey = wr->remote_qkey;
entry->dlid = rdma_ah_get_dlid(&attr);
diff --git a/include/trace/events/ib_mad.h b/include/trace/events/ib_mad.h
index 59363a083ecb..d92691c78cff 100644
--- a/include/trace/events/ib_mad.h
+++ b/include/trace/events/ib_mad.h
@@ -49,7 +49,6 @@ DECLARE_EVENT_CLASS(ib_mad_send_template,
__field(int, retries_left)
__field(int, max_retries)
__field(int, retry)
- __field(u16, pkey)
),
TP_fast_assign(
@@ -89,7 +88,7 @@ DECLARE_EVENT_CLASS(ib_mad_send_template,
"hdr : base_ver 0x%x class 0x%x class_ver 0x%x " \
"method 0x%x status 0x%x class_specific 0x%x tid 0x%llx " \
"attr_id 0x%x attr_mod 0x%x => dlid 0x%08x sl %d "\
- "pkey 0x%x rpqn 0x%x rqpkey 0x%x",
+ "rpqn 0x%x rqpkey 0x%x",
__entry->dev_index, __entry->port_num, __entry->qp_num,
__entry->agent_priv, be64_to_cpu(__entry->wrtid),
__entry->retries_left, __entry->max_retries,
@@ -100,7 +99,7 @@ DECLARE_EVENT_CLASS(ib_mad_send_template,
be16_to_cpu(__entry->class_specific),
be64_to_cpu(__entry->tid), be16_to_cpu(__entry->attr_id),
be32_to_cpu(__entry->attr_mod),
- be32_to_cpu(__entry->dlid), __entry->sl, __entry->pkey,
+ be32_to_cpu(__entry->dlid), __entry->sl,
__entry->rqpn, __entry->rqkey
)
);
@@ -204,7 +203,6 @@ TRACE_EVENT(ib_mad_recv_done_handler,
__field(u16, wc_status)
__field(u32, slid)
__field(u32, dev_index)
- __field(u16, pkey)
),
TP_fast_assign(
@@ -224,9 +222,6 @@ TRACE_EVENT(ib_mad_recv_done_handler,
__entry->slid = wc->slid;
__entry->src_qp = wc->src_qp;
__entry->sl = wc->sl;
- ib_query_pkey(qp_info->port_priv->device,
- qp_info->port_priv->port_num,
- wc->pkey_index, &__entry->pkey);
__entry->wc_status = wc->status;
),
@@ -234,7 +229,7 @@ TRACE_EVENT(ib_mad_recv_done_handler,
"base_ver 0x%02x class 0x%02x class_ver 0x%02x " \
"method 0x%02x status 0x%04x class_specific 0x%04x " \
"tid 0x%016llx attr_id 0x%04x attr_mod 0x%08x " \
- "slid 0x%08x src QP%d, sl %d pkey 0x%04x",
+ "slid 0x%08x src QP%d, sl %d",
__entry->dev_index, __entry->port_num, __entry->qp_num,
__entry->wc_status,
__entry->length,
@@ -244,7 +239,7 @@ TRACE_EVENT(ib_mad_recv_done_handler,
be16_to_cpu(__entry->class_specific),
be64_to_cpu(__entry->tid), be16_to_cpu(__entry->attr_id),
be32_to_cpu(__entry->attr_mod),
- __entry->slid, __entry->src_qp, __entry->sl, __entry->pkey
+ __entry->slid, __entry->src_qp, __entry->sl
)
);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 385/731] PCI: vmd: Disable MSI remapping after suspend
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (383 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 384/731] IB/mad: Dont call to function that might sleep while in atomic context Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 386/731] RDMA/restrack: Release MR restrack when delete Greg Kroah-Hartman
` (356 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nirmal Patel, Lorenzo Pieralisi,
Francisco Munoz, Sasha Levin
From: Nirmal Patel <nirmal.patel@linux.intel.com>
[ Upstream commit d899aa668498c07ff217b666ae9712990306e682 ]
MSI remapping is disabled by VMD driver for Intel's Icelake and
newer systems in order to improve performance by setting
VMCONFIG_MSI_REMAP. By design VMCONFIG_MSI_REMAP register is cleared
by firmware during boot. The same register gets cleared when system
is put in S3 power state. VMD driver needs to set this register again
in order to avoid interrupt issues with devices behind VMD if MSI
remapping was disabled before.
Link: https://lore.kernel.org/r/20221109142652.450998-1-nirmal.patel@linux.intel.com
Fixes: ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible")
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/controller/vmd.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index a5987e52700e..8dce71142e10 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -900,6 +900,11 @@ static int vmd_resume(struct device *dev)
struct vmd_dev *vmd = pci_get_drvdata(pdev);
int err, i;
+ if (vmd->irq_domain)
+ vmd_set_msi_remapping(vmd, true);
+ else
+ vmd_set_msi_remapping(vmd, false);
+
for (i = 0; i < vmd->msix_count; i++) {
err = devm_request_irq(dev, pci_irq_vector(pdev, i),
vmd_irq, IRQF_NO_THREAD,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 386/731] RDMA/restrack: Release MR restrack when delete
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (384 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 385/731] PCI: vmd: Disable MSI remapping after suspend Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 387/731] RDMA/core: Make sure "ib_port" is valid when access sysfs node Greg Kroah-Hartman
` (355 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mark Zhang, Michael Guralnik,
Leon Romanovsky, Sasha Levin
From: Mark Zhang <markzhang@nvidia.com>
[ Upstream commit dac153f2802db1ad46207283cb9b2aae3d707a45 ]
The MR restrack also needs to be released when delete it, otherwise it
cause memory leak as the task struct won't be released.
Fixes: 13ef5539def7 ("RDMA/restrack: Count references to the verbs objects")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/703db18e8d4ef628691fb93980a709be673e62e3.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/core/restrack.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/infiniband/core/restrack.c b/drivers/infiniband/core/restrack.c
index 1f935d9f6178..01a499a8b88d 100644
--- a/drivers/infiniband/core/restrack.c
+++ b/drivers/infiniband/core/restrack.c
@@ -343,8 +343,6 @@ void rdma_restrack_del(struct rdma_restrack_entry *res)
rt = &dev->res[res->type];
old = xa_erase(&rt->xa, res->id);
- if (res->type == RDMA_RESTRACK_MR)
- return;
WARN_ON(old != res);
out:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 387/731] RDMA/core: Make sure "ib_port" is valid when access sysfs node
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (385 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 386/731] RDMA/restrack: Release MR restrack when delete Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 388/731] RDMA/nldev: Return "-EAGAIN" if the cm_id isnt from expected port Greg Kroah-Hartman
` (354 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mark Zhang, Michael Guralnik,
Leon Romanovsky, Sasha Levin
From: Mark Zhang <markzhang@nvidia.com>
[ Upstream commit 5e15ff29b156bbbdeadae230c8ecd5ecd8ca2477 ]
The "ib_port" structure must be set before adding the sysfs kobject,
and reset after removing it, otherwise it may crash when accessing
the sysfs node:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
Mem abort info:
ESR = 0x96000006
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000e85f5ba5
[0000000000000050] pgd=0000000848fd9003, pud=000000085b387003, pmd=0000000000000000
Internal error: Oops: 96000006 [#2] PREEMPT SMP
Modules linked in: ib_umad(O) mlx5_ib(O) nfnetlink_cttimeout(E) nfnetlink(E) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_nat_ipv6(E) nf_nat_ipv4(E) nf_conncount(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) mst_pciconf(O) ipmi_devintf(E) ipmi_msghandler(E) ipmb_dev_int(OE) mlx5_core(O) mlxfw(O) mlxdevm(O) auxiliary(O) ib_uverbs(O) ib_core(O) mlx_compat(O) psample(E) sbsa_gwdt(E) uio_pdrv_genirq(E) uio(E) mlxbf_pmc(OE) mlxbf_gige(OE) mlxbf_tmfifo(OE) gpio_mlxbf2(OE) pwr_mlxbf(OE) mlx_trio(OE) i2c_mlxbf(OE) mlx_bootctl(OE) bluefield_edac(OE) knem(O) ip_tables(E) ipv6(E) crc_ccitt(E) [last unloaded: mst_pci]
Process grep (pid: 3372, stack limit = 0x0000000022055c92)
CPU: 5 PID: 3372 Comm: grep Tainted: G D OE 4.19.161-mlnx.47.gadcd9e3 #1
Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.9.2-15-ga2403ab Sep 8 2022
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : hw_stat_port_show+0x4c/0x80 [ib_core]
lr : port_attr_show+0x40/0x58 [ib_core]
sp : ffff000029f43b50
x29: ffff000029f43b50 x28: 0000000019375000
x27: ffff8007b821a540 x26: ffff000029f43e30
x25: 0000000000008000 x24: ffff000000eaa958
x23: 0000000000001000 x22: ffff8007a4ce3000
x21: ffff8007baff8000 x20: ffff8007b9066ac0
x19: ffff8007bae97578 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000
x9 : 0000000000000000 x8 : ffff8007a4ce4000
x7 : 0000000000000000 x6 : 000000000000003f
x5 : ffff000000e6a280 x4 : ffff8007a4ce3000
x3 : 0000000000000000 x2 : aaaaaaaaaaaaaaab
x1 : ffff8007b9066a10 x0 : ffff8007baff8000
Call trace:
hw_stat_port_show+0x4c/0x80 [ib_core]
port_attr_show+0x40/0x58 [ib_core]
sysfs_kf_seq_show+0x8c/0x150
kernfs_seq_show+0x44/0x50
seq_read+0x1b4/0x45c
kernfs_fop_read+0x148/0x1d8
__vfs_read+0x58/0x180
vfs_read+0x94/0x154
ksys_read+0x68/0xd8
__arm64_sys_read+0x28/0x34
el0_svc_common+0x88/0x18c
el0_svc_handler+0x78/0x94
el0_svc+0x8/0xe8
Code: f2955562 aa1603e4 aa1503e0 f9405683 (f9402861)
Fixes: d8a5883814b9 ("RDMA/core: Replace the ib_port_data hw_stats pointers with a ib_port pointer")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/88867e705c42c1cd2011e45201c25eecdb9fef94.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/core/sysfs.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 8d709986b88c..253ccaf343f6 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -1198,6 +1198,9 @@ static struct ib_port *setup_port(struct ib_core_device *coredev, int port_num,
p->port_num = port_num;
kobject_init(&p->kobj, &port_type);
+ if (device->port_data && is_full_dev)
+ device->port_data[port_num].sysfs = p;
+
cur_group = p->groups_list;
ret = alloc_port_table_group("gids", &p->groups[0], p->attrs_list,
attr->gid_tbl_len, show_port_gid);
@@ -1243,9 +1246,6 @@ static struct ib_port *setup_port(struct ib_core_device *coredev, int port_num,
}
list_add_tail(&p->kobj.entry, &coredev->port_list);
- if (device->port_data && is_full_dev)
- device->port_data[port_num].sysfs = p;
-
return p;
err_groups:
@@ -1253,6 +1253,8 @@ static struct ib_port *setup_port(struct ib_core_device *coredev, int port_num,
err_del:
kobject_del(&p->kobj);
err_put:
+ if (device->port_data && is_full_dev)
+ device->port_data[port_num].sysfs = NULL;
kobject_put(&p->kobj);
return ERR_PTR(ret);
}
@@ -1261,14 +1263,17 @@ static void destroy_port(struct ib_core_device *coredev, struct ib_port *port)
{
bool is_full_dev = &port->ibdev->coredev == coredev;
- if (port->ibdev->port_data &&
- port->ibdev->port_data[port->port_num].sysfs == port)
- port->ibdev->port_data[port->port_num].sysfs = NULL;
list_del(&port->kobj.entry);
if (is_full_dev)
sysfs_remove_groups(&port->kobj, port->ibdev->ops.port_groups);
+
sysfs_remove_groups(&port->kobj, port->groups_list);
kobject_del(&port->kobj);
+
+ if (port->ibdev->port_data &&
+ port->ibdev->port_data[port->port_num].sysfs == port)
+ port->ibdev->port_data[port->port_num].sysfs = NULL;
+
kobject_put(&port->kobj);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 388/731] RDMA/nldev: Return "-EAGAIN" if the cm_id isnt from expected port
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (386 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 387/731] RDMA/core: Make sure "ib_port" is valid when access sysfs node Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 389/731] RDMA/siw: Set defined status for work completion with undefined status Greg Kroah-Hartman
` (353 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mark Zhang, Leon Romanovsky, Sasha Levin
From: Mark Zhang <markzhang@nvidia.com>
[ Upstream commit ecacb3751f254572af0009b9501e2cdc83a30b6a ]
When filling a cm_id entry, return "-EAGAIN" instead of 0 if the cm_id
doesn'the have the same port as requested, otherwise an incomplete entry
may be returned, which causes "rdam res show cm_id" to return an error.
For example on a machine with two rdma devices with "rping -C 1 -v -s"
running background, the "rdma" command fails:
$ rdma -V
rdma utility, iproute2-5.19.0
$ rdma res show cm_id
link mlx5_0/- cm-idn 0 state LISTEN ps TCP pid 28056 comm rping src-addr 0.0.0.0:7174
error: Protocol not available
While with this fix it succeeds:
$ rdma res show cm_id
link mlx5_0/- cm-idn 0 state LISTEN ps TCP pid 26395 comm rping src-addr 0.0.0.0:7174
link mlx5_1/- cm-idn 0 state LISTEN ps TCP pid 26395 comm rping src-addr 0.0.0.0:7174
Fixes: 00313983cda6 ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/a08e898cdac5e28428eb749a99d9d981571b8ea7.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/core/nldev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/nldev.c b/drivers/infiniband/core/nldev.c
index cd89e59cbe33..6f3799698634 100644
--- a/drivers/infiniband/core/nldev.c
+++ b/drivers/infiniband/core/nldev.c
@@ -550,7 +550,7 @@ static int fill_res_cm_id_entry(struct sk_buff *msg, bool has_cap_net_admin,
struct rdma_cm_id *cm_id = &id_priv->id;
if (port && port != cm_id->port_num)
- return 0;
+ return -EAGAIN;
if (cm_id->port_num &&
nla_put_u32(msg, RDMA_NLDEV_ATTR_PORT_INDEX, cm_id->port_num))
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 389/731] RDMA/siw: Set defined status for work completion with undefined status
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (387 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 388/731] RDMA/nldev: Return "-EAGAIN" if the cm_id isnt from expected port Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 390/731] scsi: scsi_debug: Fix a warning in resp_write_scat() Greg Kroah-Hartman
` (352 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dan Carpenter, Bernard Metzler,
Jason Gunthorpe, Sasha Levin
From: Bernard Metzler <bmt@zurich.ibm.com>
[ Upstream commit 60da2d11fcbc043304910e4d2ca82f9bab953e63 ]
A malicious user may write undefined values into memory mapped completion
queue elements status or opcode. Undefined status or opcode values will
result in out-of-bounds access to an array mapping siw internal
representation of opcode and status to RDMA core representation when
reaping CQ elements. While siw detects those undefined values, it did not
correctly set completion status to a defined value, thus defeating the
whole purpose of the check.
This bug leads to the following Smatch static checker warning:
drivers/infiniband/sw/siw/siw_cq.c:96 siw_reap_cqe()
error: buffer overflow 'map_cqe_status' 10 <= 21
Fixes: bdf1da5df9da ("RDMA/siw: Fix immediate work request flush to completion queue")
Link: https://lore.kernel.org/r/20221115170747.1263298-1-bmt@zurich.ibm.com
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/sw/siw/siw_cq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/sw/siw/siw_cq.c b/drivers/infiniband/sw/siw/siw_cq.c
index acc7bcd538b5..403029de6b92 100644
--- a/drivers/infiniband/sw/siw/siw_cq.c
+++ b/drivers/infiniband/sw/siw/siw_cq.c
@@ -88,9 +88,9 @@ int siw_reap_cqe(struct siw_cq *cq, struct ib_wc *wc)
if (opcode >= SIW_NUM_OPCODES) {
opcode = 0;
- status = IB_WC_GENERAL_ERR;
+ status = SIW_WC_GENERAL_ERR;
} else if (status >= SIW_NUM_WC_STATUS) {
- status = IB_WC_GENERAL_ERR;
+ status = SIW_WC_GENERAL_ERR;
}
wc->opcode = map_wc_opcode[opcode];
wc->status = map_cqe_status[status].ib;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 390/731] scsi: scsi_debug: Fix a warning in resp_write_scat()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (388 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 389/731] RDMA/siw: Set defined status for work completion with undefined status Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 391/731] crypto: ccree - Remove debugfs when platform_driver_register failed Greg Kroah-Hartman
` (351 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Harshit Mogalapalli,
Douglas Gilbert, Martin K. Petersen, Sasha Levin
From: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ Upstream commit 216e179724c1d9f57a8ababf8bd7aaabef67f01b ]
As 'lbdof_blen' is coming from user, if the size in kzalloc() is >=
MAX_ORDER then we hit a warning.
Call trace:
sg_ioctl
sg_ioctl_common
scsi_ioctl
sg_scsi_ioctl
blk_execute_rq
blk_mq_sched_insert_request
blk_mq_run_hw_queue
__blk_mq_delay_run_hw_queue
__blk_mq_run_hw_queue
blk_mq_sched_dispatch_requests
__blk_mq_sched_dispatch_requests
blk_mq_dispatch_rq_list
scsi_queue_rq
scsi_dispatch_cmd
scsi_debug_queuecommand
schedule_resp
resp_write_scat
If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc()
will definitely fail. It creates a stack trace and messes up dmesg. The
user controls the size here so if they specify a too large size it will
fail.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 481b5e5c7949 ("scsi: scsi_debug: add resp_write_scat function")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_debug.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 0b16061d8da8..b44fd9b80934 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -3640,7 +3640,7 @@ static int resp_write_scat(struct scsi_cmnd *scp,
mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0);
return illegal_condition_result;
}
- lrdp = kzalloc(lbdof_blen, GFP_ATOMIC);
+ lrdp = kzalloc(lbdof_blen, GFP_ATOMIC | __GFP_NOWARN);
if (lrdp == NULL)
return SCSI_MLQUEUE_HOST_BUSY;
if (sdebug_verbose)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 391/731] crypto: ccree - Remove debugfs when platform_driver_register failed
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (389 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 390/731] scsi: scsi_debug: Fix a warning in resp_write_scat() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 392/731] crypto: cryptd - Use request context instead of stack for sub-request Greg Kroah-Hartman
` (350 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Herbert Xu, Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit 4f1c596df706c9aca662b6c214fad84047ae2a97 ]
When platform_driver_register failed, we need to remove debugfs,
which will caused a resource leak, fix it.
Failed logs as follows:
[ 32.606488] debugfs: Directory 'ccree' with parent '/' already present!
Fixes: 4c3f97276e15 ("crypto: ccree - introduce CryptoCell driver")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/ccree/cc_driver.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/ccree/cc_driver.c b/drivers/crypto/ccree/cc_driver.c
index 790fa9058a36..41f0a404bdf9 100644
--- a/drivers/crypto/ccree/cc_driver.c
+++ b/drivers/crypto/ccree/cc_driver.c
@@ -656,9 +656,17 @@ static struct platform_driver ccree_driver = {
static int __init ccree_init(void)
{
+ int rc;
+
cc_debugfs_global_init();
- return platform_driver_register(&ccree_driver);
+ rc = platform_driver_register(&ccree_driver);
+ if (rc) {
+ cc_debugfs_global_fini();
+ return rc;
+ }
+
+ return 0;
}
module_init(ccree_init);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 392/731] crypto: cryptd - Use request context instead of stack for sub-request
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (390 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 391/731] crypto: ccree - Remove debugfs when platform_driver_register failed Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 393/731] crypto: hisilicon/qm - add missing pci_dev_put() in q_num_set() Greg Kroah-Hartman
` (349 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Herbert Xu, Sasha Levin
From: Herbert Xu <herbert@gondor.apana.org.au>
[ Upstream commit 3a58c231172537f7b0e19d93ed33decd04f80eab ]
cryptd is buggy as it tries to use sync_skcipher without going
through the proper sync_skcipher interface. In fact it doesn't
even need sync_skcipher since it's already a proper skcipher and
can easily access the request context instead of using something
off the stack.
Fixes: 36b3875a97b8 ("crypto: cryptd - Remove VLA usage of skcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
crypto/cryptd.c | 36 +++++++++++++++++++-----------------
1 file changed, 19 insertions(+), 17 deletions(-)
diff --git a/crypto/cryptd.c b/crypto/cryptd.c
index 668095eca0fa..ca3a40fc7da9 100644
--- a/crypto/cryptd.c
+++ b/crypto/cryptd.c
@@ -68,11 +68,12 @@ struct aead_instance_ctx {
struct cryptd_skcipher_ctx {
refcount_t refcnt;
- struct crypto_sync_skcipher *child;
+ struct crypto_skcipher *child;
};
struct cryptd_skcipher_request_ctx {
crypto_completion_t complete;
+ struct skcipher_request req;
};
struct cryptd_hash_ctx {
@@ -227,13 +228,13 @@ static int cryptd_skcipher_setkey(struct crypto_skcipher *parent,
const u8 *key, unsigned int keylen)
{
struct cryptd_skcipher_ctx *ctx = crypto_skcipher_ctx(parent);
- struct crypto_sync_skcipher *child = ctx->child;
+ struct crypto_skcipher *child = ctx->child;
- crypto_sync_skcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK);
- crypto_sync_skcipher_set_flags(child,
- crypto_skcipher_get_flags(parent) &
- CRYPTO_TFM_REQ_MASK);
- return crypto_sync_skcipher_setkey(child, key, keylen);
+ crypto_skcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+ crypto_skcipher_set_flags(child,
+ crypto_skcipher_get_flags(parent) &
+ CRYPTO_TFM_REQ_MASK);
+ return crypto_skcipher_setkey(child, key, keylen);
}
static void cryptd_skcipher_complete(struct skcipher_request *req, int err)
@@ -258,13 +259,13 @@ static void cryptd_skcipher_encrypt(struct crypto_async_request *base,
struct cryptd_skcipher_request_ctx *rctx = skcipher_request_ctx(req);
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct cryptd_skcipher_ctx *ctx = crypto_skcipher_ctx(tfm);
- struct crypto_sync_skcipher *child = ctx->child;
- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, child);
+ struct skcipher_request *subreq = &rctx->req;
+ struct crypto_skcipher *child = ctx->child;
if (unlikely(err == -EINPROGRESS))
goto out;
- skcipher_request_set_sync_tfm(subreq, child);
+ skcipher_request_set_tfm(subreq, child);
skcipher_request_set_callback(subreq, CRYPTO_TFM_REQ_MAY_SLEEP,
NULL, NULL);
skcipher_request_set_crypt(subreq, req->src, req->dst, req->cryptlen,
@@ -286,13 +287,13 @@ static void cryptd_skcipher_decrypt(struct crypto_async_request *base,
struct cryptd_skcipher_request_ctx *rctx = skcipher_request_ctx(req);
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct cryptd_skcipher_ctx *ctx = crypto_skcipher_ctx(tfm);
- struct crypto_sync_skcipher *child = ctx->child;
- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, child);
+ struct skcipher_request *subreq = &rctx->req;
+ struct crypto_skcipher *child = ctx->child;
if (unlikely(err == -EINPROGRESS))
goto out;
- skcipher_request_set_sync_tfm(subreq, child);
+ skcipher_request_set_tfm(subreq, child);
skcipher_request_set_callback(subreq, CRYPTO_TFM_REQ_MAY_SLEEP,
NULL, NULL);
skcipher_request_set_crypt(subreq, req->src, req->dst, req->cryptlen,
@@ -343,9 +344,10 @@ static int cryptd_skcipher_init_tfm(struct crypto_skcipher *tfm)
if (IS_ERR(cipher))
return PTR_ERR(cipher);
- ctx->child = (struct crypto_sync_skcipher *)cipher;
+ ctx->child = cipher;
crypto_skcipher_set_reqsize(
- tfm, sizeof(struct cryptd_skcipher_request_ctx));
+ tfm, sizeof(struct cryptd_skcipher_request_ctx) +
+ crypto_skcipher_reqsize(cipher));
return 0;
}
@@ -353,7 +355,7 @@ static void cryptd_skcipher_exit_tfm(struct crypto_skcipher *tfm)
{
struct cryptd_skcipher_ctx *ctx = crypto_skcipher_ctx(tfm);
- crypto_free_sync_skcipher(ctx->child);
+ crypto_free_skcipher(ctx->child);
}
static void cryptd_skcipher_free(struct skcipher_instance *inst)
@@ -931,7 +933,7 @@ struct crypto_skcipher *cryptd_skcipher_child(struct cryptd_skcipher *tfm)
{
struct cryptd_skcipher_ctx *ctx = crypto_skcipher_ctx(&tfm->base);
- return &ctx->child->base;
+ return ctx->child;
}
EXPORT_SYMBOL_GPL(cryptd_skcipher_child);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 393/731] crypto: hisilicon/qm - add missing pci_dev_put() in q_num_set()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (391 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 392/731] crypto: cryptd - Use request context instead of stack for sub-request Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 394/731] RDMA/hns: Repacing dseg_len by macros in fill_ext_sge_inl_data() Greg Kroah-Hartman
` (348 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang, Weili Qian,
Herbert Xu, Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit cc7710d0d4ebc6998f04035cde4f32c5ddbe9d7f ]
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before q_num_set() returns.
Fixes: c8b4b477079d ("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/hisilicon/qm.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/hisilicon/qm.h b/drivers/crypto/hisilicon/qm.h
index 3068093229a5..bbb35de994eb 100644
--- a/drivers/crypto/hisilicon/qm.h
+++ b/drivers/crypto/hisilicon/qm.h
@@ -318,14 +318,14 @@ struct hisi_qp {
static inline int q_num_set(const char *val, const struct kernel_param *kp,
unsigned int device)
{
- struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_HUAWEI,
- device, NULL);
+ struct pci_dev *pdev;
u32 n, q_num;
int ret;
if (!val)
return -EINVAL;
+ pdev = pci_get_device(PCI_VENDOR_ID_HUAWEI, device, NULL);
if (!pdev) {
q_num = min_t(u32, QM_QNUM_V1, QM_QNUM_V2);
pr_info("No device found currently, suppose queue number is %u\n",
@@ -335,6 +335,8 @@ static inline int q_num_set(const char *val, const struct kernel_param *kp,
q_num = QM_QNUM_V1;
else
q_num = QM_QNUM_V2;
+
+ pci_dev_put(pdev);
}
ret = kstrtou32(val, 10, &n);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 394/731] RDMA/hns: Repacing dseg_len by macros in fill_ext_sge_inl_data()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (392 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 393/731] crypto: hisilicon/qm - add missing pci_dev_put() in q_num_set() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 395/731] RDMA/hns: Fix ext_sge num error when post send Greg Kroah-Hartman
` (347 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Luoyouming, Haoyue Xu,
Jason Gunthorpe, Sasha Levin
From: Luoyouming <luoyouming@huawei.com>
[ Upstream commit 3b1f864c904915b3baebffb31ea05ee704b0df3c ]
The sge size is known to be constant, so it's unnecessary to use sizeof to
calculate.
Link: https://lore.kernel.org/r/20220922123315.3732205-11-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 8eaa6f7d569b ("RDMA/hns: Fix ext_sge num error when post send")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 1421896abaf0..5875ccf86f66 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -156,8 +156,7 @@ static int fill_ext_sge_inl_data(struct hns_roce_qp *qp,
unsigned int *sge_idx, u32 msg_len)
{
struct ib_device *ibdev = &(to_hr_dev(qp->ibqp.device))->ib_dev;
- unsigned int dseg_len = sizeof(struct hns_roce_v2_wqe_data_seg);
- unsigned int ext_sge_sz = qp->sq.max_gs * dseg_len;
+ unsigned int ext_sge_sz = qp->sq.max_gs * HNS_ROCE_SGE_SIZE;
unsigned int left_len_in_pg;
unsigned int idx = *sge_idx;
unsigned int i = 0;
@@ -185,7 +184,7 @@ static int fill_ext_sge_inl_data(struct hns_roce_qp *qp,
if (len <= left_len_in_pg) {
memcpy(dseg, addr, len);
- idx += len / dseg_len;
+ idx += len / HNS_ROCE_SGE_SIZE;
i++;
if (i >= wr->num_sge)
@@ -200,7 +199,7 @@ static int fill_ext_sge_inl_data(struct hns_roce_qp *qp,
len -= left_len_in_pg;
addr += left_len_in_pg;
- idx += left_len_in_pg / dseg_len;
+ idx += left_len_in_pg / HNS_ROCE_SGE_SIZE;
dseg = hns_roce_get_extend_sge(qp,
idx & (qp->sge.sge_cnt - 1));
left_len_in_pg = 1 << HNS_HW_PAGE_SHIFT;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 395/731] RDMA/hns: Fix ext_sge num error when post send
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (393 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 394/731] RDMA/hns: Repacing dseg_len by macros in fill_ext_sge_inl_data() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 396/731] PCI: Check for alloc failure in pci_request_irq() Greg Kroah-Hartman
` (346 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Luoyouming, Haoyue Xu,
Jason Gunthorpe, Sasha Levin
From: Luoyouming <luoyouming@huawei.com>
[ Upstream commit 8eaa6f7d569b4a22bfc1b0a3fdfeeb401feb65a4 ]
In the HNS ROCE driver, The sge is divided into standard sge and extended
sge. There are 2 standard sge in RC/XRC, and the UD standard sge is 0.
In the scenario of RC SQ inline, if the data does not exceed 32bytes, the
standard sge will be used. If it exceeds, only the extended sge will be
used to fill the data.
Currently, when filling the extended sge, max_gs is directly used as the
number of the extended sge, which did not subtract the number of standard
sge. There is a logical error. The new algorithm subtracts the number of
standard sge from max_gs to get the actual number of extended sge.
Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC")
Link: https://lore.kernel.org/r/20221108133847.2304539-2-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 5875ccf86f66..94f3a0a87dfd 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -151,20 +151,29 @@ static void set_atomic_seg(const struct ib_send_wr *wr,
hr_reg_write(rc_sq_wqe, RC_SEND_WQE_SGE_NUM, valid_num_sge);
}
+static unsigned int get_std_sge_num(struct hns_roce_qp *qp)
+{
+ if (qp->ibqp.qp_type == IB_QPT_GSI || qp->ibqp.qp_type == IB_QPT_UD)
+ return 0;
+
+ return HNS_ROCE_SGE_IN_WQE;
+}
+
static int fill_ext_sge_inl_data(struct hns_roce_qp *qp,
const struct ib_send_wr *wr,
unsigned int *sge_idx, u32 msg_len)
{
struct ib_device *ibdev = &(to_hr_dev(qp->ibqp.device))->ib_dev;
- unsigned int ext_sge_sz = qp->sq.max_gs * HNS_ROCE_SGE_SIZE;
unsigned int left_len_in_pg;
unsigned int idx = *sge_idx;
+ unsigned int std_sge_num;
unsigned int i = 0;
unsigned int len;
void *addr;
void *dseg;
- if (msg_len > ext_sge_sz) {
+ std_sge_num = get_std_sge_num(qp);
+ if (msg_len > (qp->sq.max_gs - std_sge_num) * HNS_ROCE_SGE_SIZE) {
ibdev_err(ibdev,
"no enough extended sge space for inline data.\n");
return -EINVAL;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 396/731] PCI: Check for alloc failure in pci_request_irq()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (394 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 395/731] RDMA/hns: Fix ext_sge num error when post send Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 397/731] RDMA/hfi: Decrease PCI device reference count in error path Greg Kroah-Hartman
` (345 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zeng Heng, Bjorn Helgaas,
Christoph Hellwig, Sasha Levin
From: Zeng Heng <zengheng4@huawei.com>
[ Upstream commit 2d9cd957d40c3ac491b358e7cff0515bb07a3a9c ]
When kvasprintf() fails to allocate memory, it returns a NULL pointer.
Return error from pci_request_irq() so we don't dereference it.
[bhelgaas: commit log]
Fixes: 704e8953d3e9 ("PCI/irq: Add pci_request_irq() and pci_free_irq() helpers")
Link: https://lore.kernel.org/r/20221121020029.3759444-1-zengheng4@huawei.com
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/irq.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/irq.c b/drivers/pci/irq.c
index 12ecd0aaa28d..0050e8f6814e 100644
--- a/drivers/pci/irq.c
+++ b/drivers/pci/irq.c
@@ -44,6 +44,8 @@ int pci_request_irq(struct pci_dev *dev, unsigned int nr, irq_handler_t handler,
va_start(ap, fmt);
devname = kvasprintf(GFP_KERNEL, fmt, ap);
va_end(ap);
+ if (!devname)
+ return -ENOMEM;
ret = request_threaded_irq(pci_irq_vector(dev, nr), handler, thread_fn,
irqflags, devname, dev_id);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 397/731] RDMA/hfi: Decrease PCI device reference count in error path
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (395 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 396/731] PCI: Check for alloc failure in pci_request_irq() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 398/731] crypto: ccree - Make cc_debugfs_global_fini() available for module init function Greg Kroah-Hartman
` (344 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang, Leon Romanovsky,
Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit 9b51d072da1d27e1193e84708201c48e385ad912 ]
pci_get_device() will increase the reference count for the returned
pci_dev, and also decrease the reference count for the input parameter
*from* if it is not NULL.
If we break out the loop in node_affinity_init() with 'dev' not NULL, we
need to call pci_dev_put() to decrease the reference count. Add missing
pci_dev_put() in error path.
Fixes: c513de490f80 ("IB/hfi1: Invalid NUMA node information can cause a divide by zero")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221117131546.113280-1-wangxiongfeng2@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hfi1/affinity.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/hw/hfi1/affinity.c b/drivers/infiniband/hw/hfi1/affinity.c
index 98c813ba4304..4c403d9e90cb 100644
--- a/drivers/infiniband/hw/hfi1/affinity.c
+++ b/drivers/infiniband/hw/hfi1/affinity.c
@@ -178,6 +178,8 @@ int node_affinity_init(void)
for (node = 0; node < node_affinity.num_possible_nodes; node++)
hfi1_per_node_cntr[node] = 1;
+ pci_dev_put(dev);
+
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 398/731] crypto: ccree - Make cc_debugfs_global_fini() available for module init function
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (396 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 397/731] RDMA/hfi: Decrease PCI device reference count in error path Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 399/731] RDMA/hns: fix memory leak in hns_roce_alloc_mr() Greg Kroah-Hartman
` (343 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Uwe Kleine-König, Herbert Xu,
Sasha Levin
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[ Upstream commit 8e96729fc26c8967db45a3fb7a60387619f77a22 ]
ccree_init() calls cc_debugfs_global_fini(), the former is an init
function and the latter an exit function though.
A modular build emits:
WARNING: modpost: drivers/crypto/ccree/ccree.o: section mismatch in reference: init_module (section: .init.text) -> cc_debugfs_global_fini (section: .exit.text)
(with CONFIG_DEBUG_SECTION_MISMATCH=y).
Fixes: 4f1c596df706 ("crypto: ccree - Remove debugfs when platform_driver_register failed")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/ccree/cc_debugfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/ccree/cc_debugfs.c b/drivers/crypto/ccree/cc_debugfs.c
index 7083767602fc..8f008f024f8f 100644
--- a/drivers/crypto/ccree/cc_debugfs.c
+++ b/drivers/crypto/ccree/cc_debugfs.c
@@ -55,7 +55,7 @@ void __init cc_debugfs_global_init(void)
cc_debugfs_dir = debugfs_create_dir("ccree", NULL);
}
-void __exit cc_debugfs_global_fini(void)
+void cc_debugfs_global_fini(void)
{
debugfs_remove(cc_debugfs_dir);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 399/731] RDMA/hns: fix memory leak in hns_roce_alloc_mr()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (397 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 398/731] crypto: ccree - Make cc_debugfs_global_fini() available for module init function Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 400/731] RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed Greg Kroah-Hartman
` (342 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhengchao Shao, Leon Romanovsky,
Sasha Levin
From: Zhengchao Shao <shaozhengchao@huawei.com>
[ Upstream commit a115aa00b18f7b8982b8f458149632caf64a862a ]
When hns_roce_mr_enable() failed in hns_roce_alloc_mr(), mr_key is not
released. Compiled test only.
Fixes: 9b2cf76c9f05 ("RDMA/hns: Optimize PBL buffer allocation process")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221119070834.48502-1-shaozhengchao@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hns/hns_roce_mr.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_mr.c b/drivers/infiniband/hw/hns/hns_roce_mr.c
index 20360df25771..a593c142cd6b 100644
--- a/drivers/infiniband/hw/hns/hns_roce_mr.c
+++ b/drivers/infiniband/hw/hns/hns_roce_mr.c
@@ -415,10 +415,10 @@ struct ib_mr *hns_roce_alloc_mr(struct ib_pd *pd, enum ib_mr_type mr_type,
return &mr->ibmr;
-err_key:
- free_mr_key(hr_dev, mr);
err_pbl:
free_mr_pbl(hr_dev, mr);
+err_key:
+ free_mr_key(hr_dev, mr);
err_free:
kfree(mr);
return ERR_PTR(ret);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 400/731] RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (398 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 399/731] RDMA/hns: fix memory leak in hns_roce_alloc_mr() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 401/731] dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq Greg Kroah-Hartman
` (341 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Xiaoxu, Jason Gunthorpe, Sasha Levin
From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[ Upstream commit f67376d801499f4fa0838c18c1efcad8840e550d ]
There is a null-ptr-deref when mount.cifs over rdma:
BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
Read of size 8 at addr 0000000000000018 by task mount.cifs/3046
CPU: 2 PID: 3046 Comm: mount.cifs Not tainted 6.1.0-rc5+ #62
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc3
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
kasan_report+0xad/0x130
rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
execute_in_process_context+0x25/0x90
__rxe_cleanup+0x101/0x1d0 [rdma_rxe]
rxe_create_qp+0x16a/0x180 [rdma_rxe]
create_qp.part.0+0x27d/0x340
ib_create_qp_kernel+0x73/0x160
rdma_create_qp+0x100/0x230
_smbd_get_connection+0x752/0x20f0
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The root cause of the issue is the socket create failed in
rxe_qp_init_req().
So move the reset rxe_qp_do_cleanup() after the NULL ptr check.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20221122151437.1057671-1-zhangxiaoxu5@huawei.com
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/sw/rxe/rxe_qp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c
index 57ebf4871608..d7a968356a9b 100644
--- a/drivers/infiniband/sw/rxe/rxe_qp.c
+++ b/drivers/infiniband/sw/rxe/rxe_qp.c
@@ -830,12 +830,12 @@ static void rxe_qp_do_cleanup(struct work_struct *work)
qp->resp.mr = NULL;
}
- if (qp_type(qp) == IB_QPT_RC)
- sk_dst_reset(qp->sk->sk);
-
free_rd_atomic_resources(qp);
if (qp->sk) {
+ if (qp_type(qp) == IB_QPT_RC)
+ sk_dst_reset(qp->sk->sk);
+
kernel_sock_shutdown(qp->sk, SHUT_RDWR);
sock_release(qp->sk);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 401/731] dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (399 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 400/731] RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 402/731] dt-bindings: visconti-pcie: Fix interrupts array max constraints Greg Kroah-Hartman
` (340 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Serge Semin, Lorenzo Pieralisi,
Rob Herring, Alexander Stein, Sasha Levin
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
[ Upstream commit b8a83e600bdde93e7da41ea3204b2b3832a3c99b ]
Originally as it was defined the legacy bindings the pcie_inbound_axi and
pcie_aux clock names were supposed to be used in the fsl,imx6sx-pcie and
fsl,imx8mq-pcie devices respectively. But the bindings conversion has been
incorrectly so now the fourth clock name is defined as "pcie_inbound_axi
for imx6sx-pcie, pcie_aux for imx8mq-pcie", which is completely wrong.
Let's fix that by conditionally apply the clock-names constraints based on
the compatible string content.
Link: https://lore.kernel.org/r/20221113191301.5526-2-Sergey.Semin@baikalelectronics.ru
Fixes: 751ca492f131 ("dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../bindings/pci/fsl,imx6q-pcie.yaml | 46 +++++++++++++++++--
1 file changed, 42 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index acea1cd444fd..9b0548264a39 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -14,9 +14,6 @@ description: |+
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
and thus inherits all the common properties defined in snps,dw-pcie.yaml.
-allOf:
- - $ref: /schemas/pci/snps,dw-pcie.yaml#
-
properties:
compatible:
enum:
@@ -59,7 +56,7 @@ properties:
- const: pcie
- const: pcie_bus
- const: pcie_phy
- - const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
+ - enum: [ pcie_inbound_axi, pcie_aux ]
num-lanes:
const: 1
@@ -166,6 +163,47 @@ required:
- clocks
- clock-names
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx6sx-pcie
+ then:
+ properties:
+ clock-names:
+ items:
+ - {}
+ - {}
+ - {}
+ - const: pcie_inbound_axi
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8mq-pcie
+ then:
+ properties:
+ clock-names:
+ items:
+ - {}
+ - {}
+ - {}
+ - const: pcie_aux
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ enum:
+ - fsl,imx6sx-pcie
+ - fsl,imx8mq-pcie
+ then:
+ properties:
+ clock-names:
+ maxItems: 3
+
unevaluatedProperties: false
examples:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 402/731] dt-bindings: visconti-pcie: Fix interrupts array max constraints
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (400 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 401/731] dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 403/731] scsi: hpsa: Fix possible memory leak in hpsa_init_one() Greg Kroah-Hartman
` (339 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Serge Semin, Lorenzo Pieralisi,
Rob Herring, Nobuhiro Iwamatsu, Sasha Levin
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
[ Upstream commit 4cf4b9b70ab2785461190c08a3542d2d74c28b46 ]
In accordance with the way the device DT-node is actually defined in
arch/arm64/boot/dts/toshiba/tmpv7708.dtsi and the way the device is probed
by the DW PCIe driver there are two IRQs it actually has. It's MSI IRQ the
DT-bindings lack. Let's extend the interrupts property constraints then
and fix the schema example so one would be acceptable by the actual device
DT-bindings.
Link: https://lore.kernel.org/r/20221113191301.5526-3-Sergey.Semin@baikalelectronics.ru
Fixes: 17c1b16340f0 ("dt-bindings: pci: Add DT binding for Toshiba Visconti PCIe controller")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../devicetree/bindings/pci/toshiba,visconti-pcie.yaml | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 30b6396d83c8..aea0e2bcdd77 100644
--- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -36,7 +36,7 @@ properties:
- const: mpu
interrupts:
- maxItems: 1
+ maxItems: 2
clocks:
items:
@@ -94,8 +94,9 @@ examples:
#interrupt-cells = <1>;
ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
<0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "intr";
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi", "intr";
interrupt-map-mask = <0 0 0 7>;
interrupt-map =
<0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 403/731] scsi: hpsa: Fix possible memory leak in hpsa_init_one()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (401 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 402/731] dt-bindings: visconti-pcie: Fix interrupts array max constraints Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 404/731] crypto: tcrypt - Fix multibuffer skcipher speed test mem leak Greg Kroah-Hartman
` (338 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Ming Lei,
Martin K. Petersen, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 9c9ff300e0de07475796495d86f449340d454a0c ]
The hpda_alloc_ctlr_info() allocates h and its field reply_map. However, in
hpsa_init_one(), if alloc_percpu() failed, the hpsa_init_one() jumps to
clean1 directly, which frees h and leaks the h->reply_map.
Fix by calling hpda_free_ctlr_info() to release h->replay_map and h instead
free h directly.
Fixes: 8b834bff1b73 ("scsi: hpsa: fix selection of reply queue")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221122015751.87284-1-yuancan@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/hpsa.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 3faa87fa296a..74d563950c64 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8927,7 +8927,7 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
destroy_workqueue(h->monitor_ctlr_wq);
h->monitor_ctlr_wq = NULL;
}
- kfree(h);
+ hpda_free_ctlr_info(h);
return rc;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 404/731] crypto: tcrypt - Fix multibuffer skcipher speed test mem leak
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (402 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 403/731] scsi: hpsa: Fix possible memory leak in hpsa_init_one() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 405/731] padata: Always leave BHs disabled when running ->parallel() Greg Kroah-Hartman
` (337 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zhang Yiqun, Herbert Xu, Sasha Levin
From: Zhang Yiqun <zhangyiqun@phytium.com.cn>
[ Upstream commit 1aa33fc8d4032227253ceb736f47c52b859d9683 ]
In the past, the data for mb-skcipher test has been allocated
twice, that means the first allcated memory area is without
free, which may cause a potential memory leakage. So this
patch is to remove one allocation to fix this error.
Fixes: e161c5930c15 ("crypto: tcrypt - add multibuf skcipher...")
Signed-off-by: Zhang Yiqun <zhangyiqun@phytium.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
crypto/tcrypt.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index 3362897bf61b..4ada7e749390 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -1295,15 +1295,6 @@ static void test_mb_skcipher_speed(const char *algo, int enc, int secs,
goto out_free_tfm;
}
-
- for (i = 0; i < num_mb; ++i)
- if (testmgr_alloc_buf(data[i].xbuf)) {
- while (i--)
- testmgr_free_buf(data[i].xbuf);
- goto out_free_tfm;
- }
-
-
for (i = 0; i < num_mb; ++i) {
data[i].req = skcipher_request_alloc(tfm, GFP_KERNEL);
if (!data[i].req) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 405/731] padata: Always leave BHs disabled when running ->parallel()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (403 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 404/731] crypto: tcrypt - Fix multibuffer skcipher speed test mem leak Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 406/731] padata: Fix list iterator in padata_do_serial() Greg Kroah-Hartman
` (336 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+bc05445bc14148d51915,
Daniel Jordan, Steffen Klassert, Herbert Xu, Sasha Levin
From: Daniel Jordan <daniel.m.jordan@oracle.com>
[ Upstream commit 34c3a47d20ae55b3600fed733bf96eafe9c500d5 ]
A deadlock can happen when an overloaded system runs ->parallel() in the
context of the current task:
padata_do_parallel
->parallel()
pcrypt_aead_enc/dec
padata_do_serial
spin_lock(&reorder->lock) // BHs still enabled
<interrupt>
...
__do_softirq
...
padata_do_serial
spin_lock(&reorder->lock)
It's a bug for BHs to be on in _do_serial as Steffen points out, so
ensure they're off in the "current task" case like they are in
padata_parallel_worker to avoid this situation.
Reported-by: syzbot+bc05445bc14148d51915@syzkaller.appspotmail.com
Fixes: 4611ce224688 ("padata: allocate work structures for parallel jobs from a pool")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/padata.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/kernel/padata.c b/kernel/padata.c
index 18d3a5c699d8..9395b77fabb1 100644
--- a/kernel/padata.c
+++ b/kernel/padata.c
@@ -207,14 +207,16 @@ int padata_do_parallel(struct padata_shell *ps,
pw = padata_work_alloc();
spin_unlock(&padata_works_lock);
+ if (!pw) {
+ /* Maximum works limit exceeded, run in the current task. */
+ padata->parallel(padata);
+ }
+
rcu_read_unlock_bh();
if (pw) {
padata_work_init(pw, padata_parallel_worker, padata, 0);
queue_work(pinst->parallel_wq, &pw->pw_work);
- } else {
- /* Maximum works limit exceeded, run in the current task. */
- padata->parallel(padata);
}
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 406/731] padata: Fix list iterator in padata_do_serial()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (404 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 405/731] padata: Always leave BHs disabled when running ->parallel() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 407/731] scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add() Greg Kroah-Hartman
` (335 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Daniel Jordan, Herbert Xu, Sasha Levin
From: Daniel Jordan <daniel.m.jordan@oracle.com>
[ Upstream commit 57ddfecc72a6c9941d159543e1c0c0a74fe9afdd ]
list_for_each_entry_reverse() assumes that the iterated list is nonempty
and that every list_head is embedded in the same type, but its use in
padata_do_serial() breaks both rules.
This doesn't cause any issues now because padata_priv and padata_list
happen to have their list fields at the same offset, but we really
shouldn't be relying on that.
Fixes: bfde23ce200e ("padata: unbind parallel jobs from specific CPUs")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/padata.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/kernel/padata.c b/kernel/padata.c
index 9395b77fabb1..c17f772cc315 100644
--- a/kernel/padata.c
+++ b/kernel/padata.c
@@ -390,13 +390,16 @@ void padata_do_serial(struct padata_priv *padata)
int hashed_cpu = padata_cpu_hash(pd, padata->seq_nr);
struct padata_list *reorder = per_cpu_ptr(pd->reorder_list, hashed_cpu);
struct padata_priv *cur;
+ struct list_head *pos;
spin_lock(&reorder->lock);
/* Sort in ascending order of sequence number. */
- list_for_each_entry_reverse(cur, &reorder->list, list)
+ list_for_each_prev(pos, &reorder->list) {
+ cur = list_entry(pos, struct padata_priv, list);
if (cur->seq_nr < padata->seq_nr)
break;
- list_add(&padata->list, &cur->list);
+ }
+ list_add(&padata->list, pos);
spin_unlock(&reorder->lock);
/*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 407/731] scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (405 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 406/731] padata: Fix list iterator in padata_do_serial() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 408/731] scsi: hpsa: Fix error handling in hpsa_add_sas_host() Greg Kroah-Hartman
` (334 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Martin K. Petersen,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 78316e9dfc24906dd474630928ed1d3c562b568e ]
In mpt3sas_transport_port_add(), if sas_rphy_add() returns error,
sas_rphy_free() needs be called to free the resource allocated in
sas_end_device_alloc(). Otherwise a kernel crash will happen:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108
CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x54/0x3d0
lr : device_del+0x37c/0x3d0
Call trace:
device_del+0x54/0x3d0
attribute_container_class_device_del+0x28/0x38
transport_remove_classdev+0x6c/0x80
attribute_container_device_trigger+0x108/0x110
transport_remove_device+0x28/0x38
sas_rphy_remove+0x50/0x78 [scsi_transport_sas]
sas_port_delete+0x30/0x148 [scsi_transport_sas]
do_sas_phy_delete+0x78/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x30/0x50 [scsi_transport_sas]
sas_rphy_remove+0x38/0x78 [scsi_transport_sas]
sas_port_delete+0x30/0x148 [scsi_transport_sas]
do_sas_phy_delete+0x78/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x30/0x50 [scsi_transport_sas]
sas_remove_host+0x20/0x38 [scsi_transport_sas]
scsih_remove+0xd8/0x420 [mpt3sas]
Because transport_add_device() is not called when sas_rphy_add() fails, the
device is not added. When sas_rphy_remove() is subsequently called to
remove the device in the remove() path, a NULL pointer dereference happens.
Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109032403.1636422-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/mpt3sas/mpt3sas_transport.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index 0681daee6c14..e5ecd6ada6cd 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -829,6 +829,8 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
if ((sas_rphy_add(rphy))) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
+ sas_rphy_free(rphy);
+ rphy = NULL;
}
if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 408/731] scsi: hpsa: Fix error handling in hpsa_add_sas_host()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (406 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 407/731] scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 409/731] scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device() Greg Kroah-Hartman
` (333 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Martin K. Petersen,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 4ef174a3ad9b5d73c1b6573e244ebba2b0d86eac ]
hpsa_sas_port_add_phy() does:
...
sas_phy_add() -> may return error here
sas_port_add_phy()
...
Whereas hpsa_free_sas_phy() does:
...
sas_port_delete_phy()
sas_phy_delete()
...
If hpsa_sas_port_add_phy() returns an error, hpsa_free_sas_phy() can not be
called to free the memory because the port and the phy have not been added
yet.
Replace hpsa_free_sas_phy() with sas_phy_free() and kfree() to avoid kernel
crash in this case.
Fixes: d04e62b9d63a ("hpsa: add in sas transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221110151129.394389-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/hpsa.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 74d563950c64..a4a00944b290 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -9788,7 +9788,8 @@ static int hpsa_add_sas_host(struct ctlr_info *h)
return 0;
free_sas_phy:
- hpsa_free_sas_phy(hpsa_sas_phy);
+ sas_phy_free(hpsa_sas_phy->phy);
+ kfree(hpsa_sas_phy);
free_sas_port:
hpsa_free_sas_port(hpsa_sas_port);
free_sas_node:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 409/731] scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (407 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 408/731] scsi: hpsa: Fix error handling in hpsa_add_sas_host() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 410/731] scsi: efct: Fix possible memleak in efct_device_init() Greg Kroah-Hartman
` (332 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Martin K. Petersen,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit fda34a5d304d0b98cc967e8763b52221b66dc202 ]
If hpsa_sas_port_add_rphy() returns an error, the 'rphy' allocated in
sas_end_device_alloc() needs to be freed. Address this by calling
sas_rphy_free() in the error path.
Fixes: d04e62b9d63a ("hpsa: add in sas transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221111043012.1074466-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/hpsa.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index a4a00944b290..cf7988de7b90 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -9825,10 +9825,12 @@ static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node,
rc = hpsa_sas_port_add_rphy(hpsa_sas_port, rphy);
if (rc)
- goto free_sas_port;
+ goto free_sas_rphy;
return 0;
+free_sas_rphy:
+ sas_rphy_free(rphy);
free_sas_port:
hpsa_free_sas_port(hpsa_sas_port);
device->sas_port = NULL;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 410/731] scsi: efct: Fix possible memleak in efct_device_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (408 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 409/731] scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 411/731] scsi: scsi_debug: Fix a warning in resp_verify() Greg Kroah-Hartman
` (331 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen Zhongjin, Martin K. Petersen,
Sasha Levin
From: Chen Zhongjin <chenzhongjin@huawei.com>
[ Upstream commit bb0cd225dd37df1f4a22e36dad59ff33178ecdfc ]
In efct_device_init(), when efct_scsi_reg_fc_transport() fails,
efct_scsi_tgt_driver_exit() is not called to release memory for
efct_scsi_tgt_driver_init() and causes memleak:
unreferenced object 0xffff8881020ce000 (size 2048):
comm "modprobe", pid 465, jiffies 4294928222 (age 55.872s)
backtrace:
[<0000000021a1ef1b>] kmalloc_trace+0x27/0x110
[<000000004c3ed51c>] target_register_template+0x4fd/0x7b0 [target_core_mod]
[<00000000f3393296>] efct_scsi_tgt_driver_init+0x18/0x50 [efct]
[<00000000115de533>] 0xffffffffc0d90011
[<00000000d608f646>] do_one_initcall+0xd0/0x4e0
[<0000000067828cf1>] do_init_module+0x1cc/0x6a0
...
Fixes: 4df84e846624 ("scsi: elx: efct: Driver initialization routines")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221111074046.57061-1-chenzhongjin@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/elx/efct/efct_driver.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/elx/efct/efct_driver.c b/drivers/scsi/elx/efct/efct_driver.c
index eab68fd9337a..37e1ab96ee5b 100644
--- a/drivers/scsi/elx/efct/efct_driver.c
+++ b/drivers/scsi/elx/efct/efct_driver.c
@@ -42,6 +42,7 @@ efct_device_init(void)
rc = efct_scsi_reg_fc_transport();
if (rc) {
+ efct_scsi_tgt_driver_exit();
pr_err("failed to register to FC host\n");
return rc;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 411/731] scsi: scsi_debug: Fix a warning in resp_verify()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (409 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 410/731] scsi: efct: Fix possible memleak in efct_device_init() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 412/731] scsi: scsi_debug: Fix a warning in resp_report_zones() Greg Kroah-Hartman
` (330 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Harshit Mogalapalli,
Martin K. Petersen, Sasha Levin
From: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ Upstream commit ed0f17b748b20271cb568c7ca0b23b120316a47d ]
As 'vnum' is controlled by user, so if user tries to allocate memory larger
than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack trace and
messes up dmesg with a warning.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: c3e2fe9222d4 ("scsi: scsi_debug: Implement VERIFY(10), add VERIFY(16)")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070031.2121068-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_debug.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index b44fd9b80934..6ca3205a0bf5 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -4296,7 +4296,7 @@ static int resp_verify(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
if (ret)
return ret;
- arr = kcalloc(lb_size, vnum, GFP_ATOMIC);
+ arr = kcalloc(lb_size, vnum, GFP_ATOMIC | __GFP_NOWARN);
if (!arr) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
INSUFF_RES_ASCQ);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 412/731] scsi: scsi_debug: Fix a warning in resp_report_zones()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (410 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 411/731] scsi: scsi_debug: Fix a warning in resp_verify() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 413/731] scsi: fcoe: Fix possible name leak when device_register() fails Greg Kroah-Hartman
` (329 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Harshit Mogalapalli,
Martin K. Petersen, Sasha Levin
From: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ Upstream commit 07f2ca139d9a7a1ba71c4c03997c8de161db2346 ]
As 'alloc_len' is user controlled data, if user tries to allocate memory
larger than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack
trace and messes up dmesg with a warning.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 7db0e0c8190a ("scsi: scsi_debug: Fix buffer size of REPORT ZONES command")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070612.2121535-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_debug.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 6ca3205a0bf5..5624bb6a64a3 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -4367,7 +4367,7 @@ static int resp_report_zones(struct scsi_cmnd *scp,
rep_max_zones = min((alloc_len - 64) >> ilog2(RZONES_DESC_HD),
max_zones);
- arr = kzalloc(alloc_len, GFP_ATOMIC);
+ arr = kzalloc(alloc_len, GFP_ATOMIC | __GFP_NOWARN);
if (!arr) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
INSUFF_RES_ASCQ);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 413/731] scsi: fcoe: Fix possible name leak when device_register() fails
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (411 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 412/731] scsi: scsi_debug: Fix a warning in resp_report_zones() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 414/731] scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper() Greg Kroah-Hartman
` (328 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Martin K. Petersen,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 47b6a122c7b69a876c7ee2fc064a26b09627de9d ]
If device_register() returns an error, the name allocated by dev_set_name()
needs to be freed. As the comment of device_register() says, one should use
put_device() to give up the reference in the error path. Fix this by
calling put_device(), then the name can be freed in kobject_cleanup().
The 'fcf' is freed in fcoe_fcf_device_release(), so the kfree() in the
error path can be removed.
The 'ctlr' is freed in fcoe_ctlr_device_release(), so don't use the error
label, just return NULL after calling put_device().
Fixes: 9a74e884ee71 ("[SCSI] libfcoe: Add fcoe_sysfs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112094310.3633291-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/fcoe/fcoe_sysfs.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/fcoe/fcoe_sysfs.c b/drivers/scsi/fcoe/fcoe_sysfs.c
index af658aa38fed..6260aa5ea6af 100644
--- a/drivers/scsi/fcoe/fcoe_sysfs.c
+++ b/drivers/scsi/fcoe/fcoe_sysfs.c
@@ -830,14 +830,15 @@ struct fcoe_ctlr_device *fcoe_ctlr_device_add(struct device *parent,
dev_set_name(&ctlr->dev, "ctlr_%d", ctlr->id);
error = device_register(&ctlr->dev);
- if (error)
- goto out_del_q2;
+ if (error) {
+ destroy_workqueue(ctlr->devloss_work_q);
+ destroy_workqueue(ctlr->work_q);
+ put_device(&ctlr->dev);
+ return NULL;
+ }
return ctlr;
-out_del_q2:
- destroy_workqueue(ctlr->devloss_work_q);
- ctlr->devloss_work_q = NULL;
out_del_q:
destroy_workqueue(ctlr->work_q);
ctlr->work_q = NULL;
@@ -1036,16 +1037,16 @@ struct fcoe_fcf_device *fcoe_fcf_device_add(struct fcoe_ctlr_device *ctlr,
fcf->selected = new_fcf->selected;
error = device_register(&fcf->dev);
- if (error)
- goto out_del;
+ if (error) {
+ put_device(&fcf->dev);
+ goto out;
+ }
fcf->state = FCOE_FCF_STATE_CONNECTED;
list_add_tail(&fcf->peers, &ctlr->fcfs);
return fcf;
-out_del:
- kfree(fcf);
out:
return NULL;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 414/731] scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (412 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 413/731] scsi: fcoe: Fix possible name leak when device_register() fails Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 415/731] scsi: ipr: Fix WARNING in ipr_init() Greg Kroah-Hartman
` (327 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Martin K. Petersen,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit e6d773f93a49e0eda88a903a2a6542ca83380eb1 ]
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id
string array"), the name of device is allocated dynamically, it needs be
freed when device_register() returns error.
As comment of device_register() says, one should use put_device() to give
up the reference in the error path. Fix this by calling put_device(), then
the name can be freed in kobject_cleanup(), and sdbg_host is freed in
sdebug_release_adapter().
When the device release is not set, it means the device is not initialized.
We can not call put_device() in this case. Use kfree() to free memory.
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112131010.3757845-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_debug.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 5624bb6a64a3..591df0a91057 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -7156,7 +7156,10 @@ static int sdebug_add_host_helper(int per_host_idx)
kfree(sdbg_devinfo->zstate);
kfree(sdbg_devinfo);
}
- kfree(sdbg_host);
+ if (sdbg_host->dev.release)
+ put_device(&sdbg_host->dev);
+ else
+ kfree(sdbg_host);
pr_warn("%s: failed, errno=%d\n", __func__, -error);
return error;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 415/731] scsi: ipr: Fix WARNING in ipr_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (413 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 414/731] scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 416/731] scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails Greg Kroah-Hartman
` (326 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Martin K. Petersen,
Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit e6f108bffc3708ddcff72324f7d40dfcd0204894 ]
ipr_init() will not call unregister_reboot_notifier() when
pci_register_driver() fails, which causes a WARNING. Call
unregister_reboot_notifier() when pci_register_driver() fails.
notifier callback ipr_halt [ipr] already registered
WARNING: CPU: 3 PID: 299 at kernel/notifier.c:29
notifier_chain_register+0x16d/0x230
Modules linked in: ipr(+) xhci_pci_renesas xhci_hcd ehci_hcd usbcore
led_class gpu_sched drm_buddy video wmi drm_ttm_helper ttm
drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks
agpgart cfbft
CPU: 3 PID: 299 Comm: modprobe Tainted: G W
6.1.0-rc1-00190-g39508d23b672-dirty #332
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:notifier_chain_register+0x16d/0x230
Call Trace:
<TASK>
__blocking_notifier_chain_register+0x73/0xb0
ipr_init+0x30/0x1000 [ipr]
do_one_initcall+0xdb/0x480
do_init_module+0x1cf/0x680
load_module+0x6a50/0x70a0
__do_sys_finit_module+0x12f/0x1c0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: f72919ec2bbb ("[SCSI] ipr: implement shutdown changes and remove obsolete write cache parameter")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221113064513.14028-1-shangxiaojing@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/ipr.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 56b8a2d6ffe4..04fb7fc01226 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -10869,11 +10869,19 @@ static struct notifier_block ipr_notifier = {
**/
static int __init ipr_init(void)
{
+ int rc;
+
ipr_info("IBM Power RAID SCSI Device Driver version: %s %s\n",
IPR_DRIVER_VERSION, IPR_DRIVER_DATE);
register_reboot_notifier(&ipr_notifier);
- return pci_register_driver(&ipr_driver);
+ rc = pci_register_driver(&ipr_driver);
+ if (rc) {
+ unregister_reboot_notifier(&ipr_notifier);
+ return rc;
+ }
+
+ return 0;
}
/**
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 416/731] scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (414 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 415/731] scsi: ipr: Fix WARNING in ipr_init() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 417/731] scsi: snic: Fix possible UAF in snic_tgt_create() Greg Kroah-Hartman
` (325 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen Zhongjin, Martin K. Petersen,
Sasha Levin
From: Chen Zhongjin <chenzhongjin@huawei.com>
[ Upstream commit 4155658cee394b22b24c6d64e49247bf26d95b92 ]
fcoe_init() calls fcoe_transport_attach(&fcoe_sw_transport), but when
fcoe_if_init() fails, &fcoe_sw_transport is not detached and leaves freed
&fcoe_sw_transport on fcoe_transports list. This causes panic when
reinserting module.
BUG: unable to handle page fault for address: fffffbfff82e2213
RIP: 0010:fcoe_transport_attach+0xe1/0x230 [libfcoe]
Call Trace:
<TASK>
do_one_initcall+0xd0/0x4e0
load_module+0x5eee/0x7210
...
Fixes: 78a582463c1e ("[SCSI] fcoe: convert fcoe.ko to become an fcoe transport provider driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221115092442.133088-1-chenzhongjin@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/fcoe/fcoe.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 5ae6c207d3ac..76dbdae0e987 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -2501,6 +2501,7 @@ static int __init fcoe_init(void)
out_free:
mutex_unlock(&fcoe_config_mutex);
+ fcoe_transport_detach(&fcoe_sw_transport);
out_destroy:
destroy_workqueue(fcoe_wq);
return rc;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 417/731] scsi: snic: Fix possible UAF in snic_tgt_create()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (415 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 416/731] scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 418/731] RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps() Greg Kroah-Hartman
` (324 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Narsimhulu Musini,
Martin K. Petersen, Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit e118df492320176af94deec000ae034cc92be754 ]
Smatch reports a warning as follows:
drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn:
'&tgt->list' not removed from list
If device_add() fails in snic_tgt_create(), tgt will be freed, but
tgt->list will not be removed from snic->disc.tgt_list, then list traversal
may cause UAF.
Remove from snic->disc.tgt_list before free().
Fixes: c8806b6c9e82 ("snic: driver for Cisco SCSI HBA")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221117035100.2944812-1-cuigaosheng1@huawei.com
Acked-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/snic/snic_disc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/scsi/snic/snic_disc.c b/drivers/scsi/snic/snic_disc.c
index e9ccfb97773f..7cf871323b2c 100644
--- a/drivers/scsi/snic/snic_disc.c
+++ b/drivers/scsi/snic/snic_disc.c
@@ -318,6 +318,9 @@ snic_tgt_create(struct snic *snic, struct snic_tgt_id *tgtid)
ret);
put_device(&snic->shost->shost_gendev);
+ spin_lock_irqsave(snic->shost->host_lock, flags);
+ list_del(&tgt->list);
+ spin_unlock_irqrestore(snic->shost->host_lock, flags);
kfree(tgt);
tgt = NULL;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 418/731] RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (416 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 417/731] scsi: snic: Fix possible UAF in snic_tgt_create() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 419/731] f2fs: avoid victim selection from previous victim section Greg Kroah-Hartman
` (323 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Leon Romanovsky, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit ea5ef136e215fdef35f14010bc51fcd6686e6922 ]
As the nla_nest_start() may fail with NULL returned, the return value needs
to be checked.
Fixes: c4ffee7c9bdb ("RDMA/netlink: Implement counter dumpit calback")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221126043410.85632-1-yuancan@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/core/nldev.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/core/nldev.c b/drivers/infiniband/core/nldev.c
index 6f3799698634..cefe12964f3e 100644
--- a/drivers/infiniband/core/nldev.c
+++ b/drivers/infiniband/core/nldev.c
@@ -892,6 +892,8 @@ static int fill_stat_counter_qps(struct sk_buff *msg,
int ret = 0;
table_attr = nla_nest_start(msg, RDMA_NLDEV_ATTR_RES_QP);
+ if (!table_attr)
+ return -EMSGSIZE;
rt = &counter->device->res[RDMA_RESTRACK_QP];
xa_lock(&rt->xa);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 419/731] f2fs: avoid victim selection from previous victim section
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (417 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 418/731] RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 420/731] RDMA/nldev: Fix failure to send large messages Greg Kroah-Hartman
` (322 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yonggil Song, Chao Yu, Jaegeuk Kim,
Sasha Levin
From: Yonggil Song <yonggil.song@samsung.com>
[ Upstream commit e219aecfd4b766c4e878a3769057e9809f7fcadc ]
When f2fs chooses GC victim in large section & LFS mode,
next_victim_seg[gc_type] is referenced first. After segment is freed,
next_victim_seg[gc_type] has the next segment number.
However, next_victim_seg[gc_type] still has the last segment number
even after the last segment of section is freed. In this case, when f2fs
chooses a victim for the next GC round, the last segment of previous victim
section is chosen as a victim.
Initialize next_victim_seg[gc_type] to NULL_SEGNO for the last segment in
large section.
Fixes: e3080b0120a1 ("f2fs: support subsectional garbage collection")
Signed-off-by: Yonggil Song <yonggil.song@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/f2fs/gc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index 4cbaa6ab083f..7863f8fd3b95 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1673,8 +1673,9 @@ static int do_garbage_collect(struct f2fs_sb_info *sbi,
get_valid_blocks(sbi, segno, false) == 0)
seg_freed++;
- if (__is_large_section(sbi) && segno + 1 < end_segno)
- sbi->next_victim_seg[gc_type] = segno + 1;
+ if (__is_large_section(sbi))
+ sbi->next_victim_seg[gc_type] =
+ (segno + 1 < end_segno) ? segno + 1 : NULL_SEGNO;
skip:
f2fs_put_page(sum_page, 0);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 420/731] RDMA/nldev: Fix failure to send large messages
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (418 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 419/731] f2fs: avoid victim selection from previous victim section Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 421/731] crypto: amlogic - Remove kcalloc without check Greg Kroah-Hartman
` (321 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mark Zhang, Patrisious Haddad,
Leon Romanovsky, Sasha Levin
From: Mark Zhang <markzhang@nvidia.com>
[ Upstream commit fc8f93ad3e5485d45c992233c96acd902992dfc4 ]
Return "-EMSGSIZE" instead of "-EINVAL" when filling a QP entry, so that
new SKBs will be allocated if there's not enough room in current SKB.
Fixes: 65959522f806 ("RDMA: Add support to dump resource tracker in RAW format")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/b5e9c62f6b8369acab5648b661bf539cbceeffdc.1669636336.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/core/nldev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/nldev.c b/drivers/infiniband/core/nldev.c
index cefe12964f3e..7ad3ba7d5a0a 100644
--- a/drivers/infiniband/core/nldev.c
+++ b/drivers/infiniband/core/nldev.c
@@ -511,7 +511,7 @@ static int fill_res_qp_entry(struct sk_buff *msg, bool has_cap_net_admin,
/* In create_qp() port is not set yet */
if (qp->port && nla_put_u32(msg, RDMA_NLDEV_ATTR_PORT_INDEX, qp->port))
- return -EINVAL;
+ return -EMSGSIZE;
ret = nla_put_u32(msg, RDMA_NLDEV_ATTR_RES_LQPN, qp->qp_num);
if (ret)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 421/731] crypto: amlogic - Remove kcalloc without check
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (419 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 420/731] RDMA/nldev: Fix failure to send large messages Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 422/731] crypto: omap-sham - Use pm_runtime_resume_and_get() in omap_sham_probe() Greg Kroah-Hartman
` (320 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christophe JAILLET, Herbert Xu, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit 3d780c8a9850ad60dee47a8d971ba7888f3d1bd3 ]
There is no real point in allocating dedicated memory for the irqs array.
MAXFLOW is only 2, so it is easier to allocated the needed space
directly within the 'meson_dev' structure.
This saves some memory allocation and avoids an indirection when using the
irqs array.
Fixes: 48fe583fe541 ("crypto: amlogic - Add crypto accelerator...")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/amlogic/amlogic-gxl-core.c | 1 -
drivers/crypto/amlogic/amlogic-gxl.h | 2 +-
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/crypto/amlogic/amlogic-gxl-core.c b/drivers/crypto/amlogic/amlogic-gxl-core.c
index 6e7ae896717c..937187027ad5 100644
--- a/drivers/crypto/amlogic/amlogic-gxl-core.c
+++ b/drivers/crypto/amlogic/amlogic-gxl-core.c
@@ -237,7 +237,6 @@ static int meson_crypto_probe(struct platform_device *pdev)
return err;
}
- mc->irqs = devm_kcalloc(mc->dev, MAXFLOW, sizeof(int), GFP_KERNEL);
for (i = 0; i < MAXFLOW; i++) {
mc->irqs[i] = platform_get_irq(pdev, i);
if (mc->irqs[i] < 0)
diff --git a/drivers/crypto/amlogic/amlogic-gxl.h b/drivers/crypto/amlogic/amlogic-gxl.h
index dc0f142324a3..8c0746a1d6d4 100644
--- a/drivers/crypto/amlogic/amlogic-gxl.h
+++ b/drivers/crypto/amlogic/amlogic-gxl.h
@@ -95,7 +95,7 @@ struct meson_dev {
struct device *dev;
struct meson_flow *chanlist;
atomic_t flow;
- int *irqs;
+ int irqs[MAXFLOW];
#ifdef CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG
struct dentry *dbgfs_dir;
#endif
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 422/731] crypto: omap-sham - Use pm_runtime_resume_and_get() in omap_sham_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (420 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 421/731] crypto: amlogic - Remove kcalloc without check Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 423/731] riscv/mm: add arch hook arch_clear_hugepage_flags Greg Kroah-Hartman
` (319 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Mark Greer,
Herbert Xu, Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit 7bcceb4c9896b1b672b636ae70fe75110d6bf1ad ]
omap_sham_probe() calls pm_runtime_get_sync() and calls
pm_runtime_put_sync() latter to put usage_counter. However,
pm_runtime_get_sync() will increment usage_counter even it failed. Fix
it by replacing it with pm_runtime_resume_and_get() to keep usage
counter balanced.
Fixes: b359f034c8bf ("crypto: omap-sham - Convert to use pm_runtime API")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/omap-sham.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index f6bf53c00b61..4ec6949a7ca9 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -2114,7 +2114,7 @@ static int omap_sham_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
- err = pm_runtime_get_sync(dev);
+ err = pm_runtime_resume_and_get(dev);
if (err < 0) {
dev_err(dev, "failed to get sync: %d\n", err);
goto err_pm;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 423/731] riscv/mm: add arch hook arch_clear_hugepage_flags
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (421 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 422/731] crypto: omap-sham - Use pm_runtime_resume_and_get() in omap_sham_probe() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 424/731] RDMA/hfi1: Fix error return code in parse_platform_config() Greg Kroah-Hartman
` (318 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tong Tiangen, Palmer Dabbelt, Sasha Levin
From: Tong Tiangen <tongtiangen@huawei.com>
[ Upstream commit d8bf77a1dc3079692f54be3087a5fd16d90027b0 ]
With the PG_arch_1 we keep track if the page's data cache is clean,
architecture rely on this property to treat new pages as dirty with
respect to the data cache and perform the flushing before mapping the pages
into userspace.
This patch adds a new architecture hook, arch_clear_hugepage_flags,so that
architectures which rely on the page flags being in a particular state for
fresh allocations can adjust the flags accordingly when a page is freed
into the pool.
Fixes: 9e953cda5cdf ("riscv: Introduce huge page support for 32/64bit kernel")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20221024094725.3054311-3-tongtiangen@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/riscv/include/asm/hugetlb.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/riscv/include/asm/hugetlb.h b/arch/riscv/include/asm/hugetlb.h
index a5c2ca1d1cd8..ec19d6afc896 100644
--- a/arch/riscv/include/asm/hugetlb.h
+++ b/arch/riscv/include/asm/hugetlb.h
@@ -5,4 +5,10 @@
#include <asm-generic/hugetlb.h>
#include <asm/page.h>
+static inline void arch_clear_hugepage_flags(struct page *page)
+{
+ clear_bit(PG_dcache_clean, &page->flags);
+}
+#define arch_clear_hugepage_flags arch_clear_hugepage_flags
+
#endif /* _ASM_RISCV_HUGETLB_H */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 424/731] RDMA/hfi1: Fix error return code in parse_platform_config()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (422 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 423/731] riscv/mm: add arch hook arch_clear_hugepage_flags Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 425/731] RDMA/srp: Fix error return code in srp_parse_options() Greg Kroah-Hartman
` (317 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wang Yufen, Leon Romanovsky, Sasha Levin
From: Wang Yufen <wangyufen@huawei.com>
[ Upstream commit 725349f8ba1e78a146c6ff8f3ee5e2712e517106 ]
In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto.
Fixes: 97167e813415 ("staging/rdma/hfi1: Tune for unknown channel if configuration file is absent")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1669953638-11747-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hfi1/firmware.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/infiniband/hw/hfi1/firmware.c b/drivers/infiniband/hw/hfi1/firmware.c
index 31e63e245ea9..ddf3217893f8 100644
--- a/drivers/infiniband/hw/hfi1/firmware.c
+++ b/drivers/infiniband/hw/hfi1/firmware.c
@@ -1744,6 +1744,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
if (!dd->platform_config.data) {
dd_dev_err(dd, "%s: Missing config file\n", __func__);
+ ret = -EINVAL;
goto bail;
}
ptr = (u32 *)dd->platform_config.data;
@@ -1752,6 +1753,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
ptr++;
if (magic_num != PLATFORM_CONFIG_MAGIC_NUM) {
dd_dev_err(dd, "%s: Bad config file\n", __func__);
+ ret = -EINVAL;
goto bail;
}
@@ -1775,6 +1777,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
if (file_length > dd->platform_config.size) {
dd_dev_info(dd, "%s:File claims to be larger than read size\n",
__func__);
+ ret = -EINVAL;
goto bail;
} else if (file_length < dd->platform_config.size) {
dd_dev_info(dd,
@@ -1795,6 +1798,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
dd_dev_err(dd, "%s: Failed validation at offset %ld\n",
__func__, (ptr - (u32 *)
dd->platform_config.data));
+ ret = -EINVAL;
goto bail;
}
@@ -1838,6 +1842,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
__func__, table_type,
(ptr - (u32 *)
dd->platform_config.data));
+ ret = -EINVAL;
goto bail; /* We don't trust this file now */
}
pcfgcache->config_tables[table_type].table = ptr;
@@ -1857,6 +1862,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
__func__, table_type,
(ptr -
(u32 *)dd->platform_config.data));
+ ret = -EINVAL;
goto bail; /* We don't trust this file now */
}
pcfgcache->config_tables[table_type].table_metadata =
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 425/731] RDMA/srp: Fix error return code in srp_parse_options()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (423 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 424/731] RDMA/hfi1: Fix error return code in parse_platform_config() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 426/731] PCI: mt7621: Rename mt7621_pci_ to mt7621_pcie_ Greg Kroah-Hartman
` (316 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wang Yufen, Bart Van Assche,
Leon Romanovsky, Sasha Levin
From: Wang Yufen <wangyufen@huawei.com>
[ Upstream commit ed461b30b22c8fa85c25189c14cb89f29595cd14 ]
In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto. Also investigate each case separately as Andy suggessted.
Fixes: e711f968c49c ("IB/srp: replace custom implementation of hex2bin()")
Fixes: 2a174df0c602 ("IB/srp: Use kstrtoull() instead of simple_strtoull()")
Fixes: 19f313438c77 ("IB/srp: Add RDMA/CM support")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1669953638-11747-2-git-send-email-wangyufen@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/ulp/srp/ib_srp.c | 96 ++++++++++++++++++++++++-----
1 file changed, 82 insertions(+), 14 deletions(-)
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 2f4991cea98c..a6117a7d0ab1 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -3397,7 +3397,8 @@ static int srp_parse_options(struct net *net, const char *buf,
break;
case SRP_OPT_PKEY:
- if (match_hex(args, &token)) {
+ ret = match_hex(args, &token);
+ if (ret) {
pr_warn("bad P_Key parameter '%s'\n", p);
goto out;
}
@@ -3457,7 +3458,8 @@ static int srp_parse_options(struct net *net, const char *buf,
break;
case SRP_OPT_MAX_SECT:
- if (match_int(args, &token)) {
+ ret = match_int(args, &token);
+ if (ret) {
pr_warn("bad max sect parameter '%s'\n", p);
goto out;
}
@@ -3465,8 +3467,15 @@ static int srp_parse_options(struct net *net, const char *buf,
break;
case SRP_OPT_QUEUE_SIZE:
- if (match_int(args, &token) || token < 1) {
+ ret = match_int(args, &token);
+ if (ret) {
+ pr_warn("match_int() failed for queue_size parameter '%s', Error %d\n",
+ p, ret);
+ goto out;
+ }
+ if (token < 1) {
pr_warn("bad queue_size parameter '%s'\n", p);
+ ret = -EINVAL;
goto out;
}
target->scsi_host->can_queue = token;
@@ -3477,25 +3486,40 @@ static int srp_parse_options(struct net *net, const char *buf,
break;
case SRP_OPT_MAX_CMD_PER_LUN:
- if (match_int(args, &token) || token < 1) {
+ ret = match_int(args, &token);
+ if (ret) {
+ pr_warn("match_int() failed for max cmd_per_lun parameter '%s', Error %d\n",
+ p, ret);
+ goto out;
+ }
+ if (token < 1) {
pr_warn("bad max cmd_per_lun parameter '%s'\n",
p);
+ ret = -EINVAL;
goto out;
}
target->scsi_host->cmd_per_lun = token;
break;
case SRP_OPT_TARGET_CAN_QUEUE:
- if (match_int(args, &token) || token < 1) {
+ ret = match_int(args, &token);
+ if (ret) {
+ pr_warn("match_int() failed for max target_can_queue parameter '%s', Error %d\n",
+ p, ret);
+ goto out;
+ }
+ if (token < 1) {
pr_warn("bad max target_can_queue parameter '%s'\n",
p);
+ ret = -EINVAL;
goto out;
}
target->target_can_queue = token;
break;
case SRP_OPT_IO_CLASS:
- if (match_hex(args, &token)) {
+ ret = match_hex(args, &token);
+ if (ret) {
pr_warn("bad IO class parameter '%s'\n", p);
goto out;
}
@@ -3504,6 +3528,7 @@ static int srp_parse_options(struct net *net, const char *buf,
pr_warn("unknown IO class parameter value %x specified (use %x or %x).\n",
token, SRP_REV10_IB_IO_CLASS,
SRP_REV16A_IB_IO_CLASS);
+ ret = -EINVAL;
goto out;
}
target->io_class = token;
@@ -3526,16 +3551,24 @@ static int srp_parse_options(struct net *net, const char *buf,
break;
case SRP_OPT_CMD_SG_ENTRIES:
- if (match_int(args, &token) || token < 1 || token > 255) {
+ ret = match_int(args, &token);
+ if (ret) {
+ pr_warn("match_int() failed for max cmd_sg_entries parameter '%s', Error %d\n",
+ p, ret);
+ goto out;
+ }
+ if (token < 1 || token > 255) {
pr_warn("bad max cmd_sg_entries parameter '%s'\n",
p);
+ ret = -EINVAL;
goto out;
}
target->cmd_sg_cnt = token;
break;
case SRP_OPT_ALLOW_EXT_SG:
- if (match_int(args, &token)) {
+ ret = match_int(args, &token);
+ if (ret) {
pr_warn("bad allow_ext_sg parameter '%s'\n", p);
goto out;
}
@@ -3543,43 +3576,77 @@ static int srp_parse_options(struct net *net, const char *buf,
break;
case SRP_OPT_SG_TABLESIZE:
- if (match_int(args, &token) || token < 1 ||
- token > SG_MAX_SEGMENTS) {
+ ret = match_int(args, &token);
+ if (ret) {
+ pr_warn("match_int() failed for max sg_tablesize parameter '%s', Error %d\n",
+ p, ret);
+ goto out;
+ }
+ if (token < 1 || token > SG_MAX_SEGMENTS) {
pr_warn("bad max sg_tablesize parameter '%s'\n",
p);
+ ret = -EINVAL;
goto out;
}
target->sg_tablesize = token;
break;
case SRP_OPT_COMP_VECTOR:
- if (match_int(args, &token) || token < 0) {
+ ret = match_int(args, &token);
+ if (ret) {
+ pr_warn("match_int() failed for comp_vector parameter '%s', Error %d\n",
+ p, ret);
+ goto out;
+ }
+ if (token < 0) {
pr_warn("bad comp_vector parameter '%s'\n", p);
+ ret = -EINVAL;
goto out;
}
target->comp_vector = token;
break;
case SRP_OPT_TL_RETRY_COUNT:
- if (match_int(args, &token) || token < 2 || token > 7) {
+ ret = match_int(args, &token);
+ if (ret) {
+ pr_warn("match_int() failed for tl_retry_count parameter '%s', Error %d\n",
+ p, ret);
+ goto out;
+ }
+ if (token < 2 || token > 7) {
pr_warn("bad tl_retry_count parameter '%s' (must be a number between 2 and 7)\n",
p);
+ ret = -EINVAL;
goto out;
}
target->tl_retry_count = token;
break;
case SRP_OPT_MAX_IT_IU_SIZE:
- if (match_int(args, &token) || token < 0) {
+ ret = match_int(args, &token);
+ if (ret) {
+ pr_warn("match_int() failed for max it_iu_size parameter '%s', Error %d\n",
+ p, ret);
+ goto out;
+ }
+ if (token < 0) {
pr_warn("bad maximum initiator to target IU size '%s'\n", p);
+ ret = -EINVAL;
goto out;
}
target->max_it_iu_size = token;
break;
case SRP_OPT_CH_COUNT:
- if (match_int(args, &token) || token < 1) {
+ ret = match_int(args, &token);
+ if (ret) {
+ pr_warn("match_int() failed for channel count parameter '%s', Error %d\n",
+ p, ret);
+ goto out;
+ }
+ if (token < 1) {
pr_warn("bad channel count %s\n", p);
+ ret = -EINVAL;
goto out;
}
target->ch_count = token;
@@ -3588,6 +3655,7 @@ static int srp_parse_options(struct net *net, const char *buf,
default:
pr_warn("unknown parameter or missing value '%s' in target creation request\n",
p);
+ ret = -EINVAL;
goto out;
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 426/731] PCI: mt7621: Rename mt7621_pci_ to mt7621_pcie_
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (424 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 425/731] RDMA/srp: Fix error return code in srp_parse_options() Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 427/731] PCI: mt7621: Add sentinel to quirks table Greg Kroah-Hartman
` (315 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bjorn Helgaas, Sergio Paracuellos,
Matthias Brugger, Sasha Levin
From: Bjorn Helgaas <bhelgaas@google.com>
[ Upstream commit 4793895f597d42eb54a0f54711b61263b6a8dd03 ]
Rename mt7621_pci_* structs and functions to mt7621_pcie_* for consistency
with the rest of the file.
Link: https://lore.kernel.org/r/20211223011054.1227810-18-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Stable-dep-of: 19098934f910 ("PCI: mt7621: Add sentinel to quirks table")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 36 ++++++++++++-------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index 6acfc94a16e7..c4f57bb63482 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -93,8 +93,8 @@ struct mt7621_pcie_port {
* reset lines are inverted.
*/
struct mt7621_pcie {
- void __iomem *base;
struct device *dev;
+ void __iomem *base;
struct list_head ports;
bool resets_inverted;
};
@@ -129,7 +129,7 @@ static inline void pcie_port_write(struct mt7621_pcie_port *port,
writel_relaxed(val, port->base + reg);
}
-static inline u32 mt7621_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
+static inline u32 mt7621_pcie_get_cfgaddr(unsigned int bus, unsigned int slot,
unsigned int func, unsigned int where)
{
return (((where & 0xF00) >> 8) << 24) | (bus << 16) | (slot << 11) |
@@ -140,7 +140,7 @@ static void __iomem *mt7621_pcie_map_bus(struct pci_bus *bus,
unsigned int devfn, int where)
{
struct mt7621_pcie *pcie = bus->sysdata;
- u32 address = mt7621_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+ u32 address = mt7621_pcie_get_cfgaddr(bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn), where);
writel_relaxed(address, pcie->base + RALINK_PCI_CONFIG_ADDR);
@@ -148,7 +148,7 @@ static void __iomem *mt7621_pcie_map_bus(struct pci_bus *bus,
return pcie->base + RALINK_PCI_CONFIG_DATA + (where & 3);
}
-struct pci_ops mt7621_pci_ops = {
+struct pci_ops mt7621_pcie_ops = {
.map_bus = mt7621_pcie_map_bus,
.read = pci_generic_config_read,
.write = pci_generic_config_write,
@@ -156,7 +156,7 @@ struct pci_ops mt7621_pci_ops = {
static u32 read_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg)
{
- u32 address = mt7621_pci_get_cfgaddr(0, dev, 0, reg);
+ u32 address = mt7621_pcie_get_cfgaddr(0, dev, 0, reg);
pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
return pcie_read(pcie, RALINK_PCI_CONFIG_DATA);
@@ -165,7 +165,7 @@ static u32 read_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg)
static void write_config(struct mt7621_pcie *pcie, unsigned int dev,
u32 reg, u32 val)
{
- u32 address = mt7621_pci_get_cfgaddr(0, dev, 0, reg);
+ u32 address = mt7621_pcie_get_cfgaddr(0, dev, 0, reg);
pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
pcie_write(pcie, val, RALINK_PCI_CONFIG_DATA);
@@ -505,16 +505,16 @@ static int mt7621_pcie_register_host(struct pci_host_bridge *host)
{
struct mt7621_pcie *pcie = pci_host_bridge_priv(host);
- host->ops = &mt7621_pci_ops;
+ host->ops = &mt7621_pcie_ops;
host->sysdata = pcie;
return pci_host_probe(host);
}
-static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
+static const struct soc_device_attribute mt7621_pcie_quirks_match[] = {
{ .soc_id = "mt7621", .revision = "E2" }
};
-static int mt7621_pci_probe(struct platform_device *pdev)
+static int mt7621_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct soc_device_attribute *attr;
@@ -535,7 +535,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pcie);
INIT_LIST_HEAD(&pcie->ports);
- attr = soc_device_match(mt7621_pci_quirks_match);
+ attr = soc_device_match(mt7621_pcie_quirks_match);
if (attr)
pcie->resets_inverted = true;
@@ -572,7 +572,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
return err;
}
-static int mt7621_pci_remove(struct platform_device *pdev)
+static int mt7621_pcie_remove(struct platform_device *pdev)
{
struct mt7621_pcie *pcie = platform_get_drvdata(pdev);
struct mt7621_pcie_port *port;
@@ -583,18 +583,18 @@ static int mt7621_pci_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id mt7621_pci_ids[] = {
+static const struct of_device_id mt7621_pcie_ids[] = {
{ .compatible = "mediatek,mt7621-pci" },
{},
};
-MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
+MODULE_DEVICE_TABLE(of, mt7621_pcie_ids);
-static struct platform_driver mt7621_pci_driver = {
- .probe = mt7621_pci_probe,
- .remove = mt7621_pci_remove,
+static struct platform_driver mt7621_pcie_driver = {
+ .probe = mt7621_pcie_probe,
+ .remove = mt7621_pcie_remove,
.driver = {
.name = "mt7621-pci",
- .of_match_table = of_match_ptr(mt7621_pci_ids),
+ .of_match_table = of_match_ptr(mt7621_pcie_ids),
},
};
-builtin_platform_driver(mt7621_pci_driver);
+builtin_platform_driver(mt7621_pcie_driver);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 427/731] PCI: mt7621: Add sentinel to quirks table
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (425 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 426/731] PCI: mt7621: Rename mt7621_pci_ to mt7621_pcie_ Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 428/731] orangefs: Fix sysfs not cleanup when dev init failed Greg Kroah-Hartman
` (314 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Thomson, Lorenzo Pieralisi,
Sergio Paracuellos, Sasha Levin
From: John Thomson <git@johnthomson.fastmail.com.au>
[ Upstream commit 19098934f910b4d47cb30251dd39ffa57bef9523 ]
Current driver is missing a sentinel in the struct soc_device_attribute
array, which causes an oops when assessed by the
soc_device_match(mt7621_pcie_quirks_match) call.
This was only exposed once the CONFIG_SOC_MT7621 mt7621 soc_dev_attr
was fixed to register the SOC as a device, in:
commit 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early")
Fix it by adding the required sentinel.
Link: https://lore.kernel.org/lkml/26ebbed1-0fe9-4af9-8466-65f841d0b382@app.fastmail.com
Link: https://lore.kernel.org/r/20221205204645.301301-1-git@johnthomson.fastmail.com.au
Fixes: b483b4e4d3f6 ("staging: mt7621-pci: add quirks for 'E2' revision using 'soc_device_attribute'")
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index c4f57bb63482..b520d1e0edd1 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -511,7 +511,8 @@ static int mt7621_pcie_register_host(struct pci_host_bridge *host)
}
static const struct soc_device_attribute mt7621_pcie_quirks_match[] = {
- { .soc_id = "mt7621", .revision = "E2" }
+ { .soc_id = "mt7621", .revision = "E2" },
+ { /* sentinel */ }
};
static int mt7621_pcie_probe(struct platform_device *pdev)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 428/731] orangefs: Fix sysfs not cleanup when dev init failed
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (426 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 427/731] PCI: mt7621: Add sentinel to quirks table Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 429/731] RDMA/hns: Fix AH attr queried by query_qp Greg Kroah-Hartman
` (313 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Xiaoxu, Mike Marshall, Sasha Levin
From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[ Upstream commit ea60a4ad0cf88b411cde6888b8c890935686ecd7 ]
When the dev init failed, should cleanup the sysfs, otherwise, the
module will never be loaded since can not create duplicate sysfs
directory:
sysfs: cannot create duplicate filename '/fs/orangefs'
CPU: 1 PID: 6549 Comm: insmod Tainted: G W 6.0.0+ #44
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
sysfs_warn_dup.cold+0x17/0x24
sysfs_create_dir_ns+0x16d/0x180
kobject_add_internal+0x156/0x3a0
kobject_init_and_add+0xcf/0x120
orangefs_sysfs_init+0x7e/0x3a0 [orangefs]
orangefs_init+0xfe/0x1000 [orangefs]
do_one_initcall+0x87/0x2a0
do_init_module+0xdf/0x320
load_module+0x2f98/0x3330
__do_sys_finit_module+0x113/0x1b0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
kobject_add_internal failed for orangefs with -EEXIST, don't try to register things with the same name in the same directory.
Fixes: 2f83ace37181 ("orangefs: put register_chrdev immediately before register_filesystem")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/orangefs/orangefs-mod.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/orangefs/orangefs-mod.c b/fs/orangefs/orangefs-mod.c
index cd7297815f91..5ab741c60b7e 100644
--- a/fs/orangefs/orangefs-mod.c
+++ b/fs/orangefs/orangefs-mod.c
@@ -141,7 +141,7 @@ static int __init orangefs_init(void)
gossip_err("%s: could not initialize device subsystem %d!\n",
__func__,
ret);
- goto cleanup_device;
+ goto cleanup_sysfs;
}
ret = register_filesystem(&orangefs_fs_type);
@@ -152,11 +152,11 @@ static int __init orangefs_init(void)
goto out;
}
- orangefs_sysfs_exit();
-
-cleanup_device:
orangefs_dev_cleanup();
+cleanup_sysfs:
+ orangefs_sysfs_exit();
+
sysfs_init_failed:
orangefs_debugfs_cleanup();
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 429/731] RDMA/hns: Fix AH attr queried by query_qp
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (427 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 428/731] orangefs: Fix sysfs not cleanup when dev init failed Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 430/731] RDMA/hns: Fix PBL page MTR find Greg Kroah-Hartman
` (312 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chengchang Tang, Haoyue Xu,
Jason Gunthorpe, Sasha Levin
From: Chengchang Tang <tangchengchang@huawei.com>
[ Upstream commit bc34c04f7b97c3794dec5a6d6d27ffd5f0e4f5c8 ]
The queried AH attr is invalid. This patch fix it.
This problem is found by rdma-core test test_mr_rereg_pd
ERROR: test_mr_rereg_pd (tests.test_mr.MRTest)
Test that cover rereg MR's PD with this flow:
----------------------------------------------------------------------
Traceback (most recent call last):
File "./tests/test_mr.py", line 157, in test_mr_rereg_pd
self.restate_qps()
File "./tests/test_mr.py", line 113, in restate_qps
self.server.qp.to_rts(self.server_qp_attr)
File "qp.pyx", line 1137, in pyverbs.qp.QP.to_rts
File "qp.pyx", line 1123, in pyverbs.qp.QP.to_rtr
pyverbs.pyverbs_error.PyverbsRDMAError: Failed to modify QP state to RTR.
Errno: 22, Invalid argument
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/20221126102911.2921820-3-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 94f3a0a87dfd..155ae202b1ec 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -5129,6 +5129,8 @@ static int hns_roce_v2_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr,
rdma_ah_set_sl(&qp_attr->ah_attr,
hr_reg_read(&context, QPC_SL));
+ rdma_ah_set_port_num(&qp_attr->ah_attr, hr_qp->port + 1);
+ rdma_ah_set_ah_flags(&qp_attr->ah_attr, IB_AH_GRH);
grh->flow_label = hr_reg_read(&context, QPC_FL);
grh->sgid_index = hr_reg_read(&context, QPC_GMV_IDX);
grh->hop_limit = hr_reg_read(&context, QPC_HOPLIMIT);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 430/731] RDMA/hns: Fix PBL page MTR find
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (428 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 429/731] RDMA/hns: Fix AH attr queried by query_qp Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 431/731] RDMA/hns: Fix page size cap from firmware Greg Kroah-Hartman
` (311 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chengchang Tang, Haoyue Xu,
Jason Gunthorpe, Sasha Levin
From: Chengchang Tang <tangchengchang@huawei.com>
[ Upstream commit 9fb39ef2ff3e18f1740625ba04093dfbef086d2b ]
Now, The address of the first two pages in the MR will be searched, which
use to speed up the lookup of the pbl table for hardware. An exception
will occur when there is only one page in this MR. This patch fix the
number of page to search.
Fixes: 9b2cf76c9f05 ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/20221126102911.2921820-4-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 155ae202b1ec..b9557be812b7 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -3024,7 +3024,8 @@ static int set_mtpt_pbl(struct hns_roce_dev *hr_dev,
int i, count;
count = hns_roce_mtr_find(hr_dev, &mr->pbl_mtr, 0, pages,
- ARRAY_SIZE(pages), &pbl_ba);
+ min_t(int, ARRAY_SIZE(pages), mr->npages),
+ &pbl_ba);
if (count < 1) {
ibdev_err(ibdev, "failed to find PBL mtr, count = %d.\n",
count);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 431/731] RDMA/hns: Fix page size cap from firmware
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (429 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 430/731] RDMA/hns: Fix PBL page MTR find Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 432/731] RDMA/hns: Fix error code of CMD Greg Kroah-Hartman
` (310 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chengchang Tang, Haoyue Xu,
Jason Gunthorpe, Sasha Levin
From: Chengchang Tang <tangchengchang@huawei.com>
[ Upstream commit 99dc5a0712883d5d13b620d25b3759d429577bc8 ]
Add verification to make sure the roce page size cap is supported by the
system page size.
Fixes: ba6bb7e97421 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/20221126102911.2921820-5-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index b9557be812b7..16f39321b319 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -2371,6 +2371,9 @@ static int hns_roce_query_pf_caps(struct hns_roce_dev *hr_dev)
V2_QUERY_PF_CAPS_D_RQWQE_HOP_NUM_M,
V2_QUERY_PF_CAPS_D_RQWQE_HOP_NUM_S);
+ if (!(caps->page_size_cap & PAGE_SIZE))
+ caps->page_size_cap = HNS_ROCE_V2_PAGE_SIZE_SUPPORTED;
+
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 432/731] RDMA/hns: Fix error code of CMD
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (430 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 431/731] RDMA/hns: Fix page size cap from firmware Greg Kroah-Hartman
@ 2022-12-28 14:38 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 433/731] crypto: img-hash - Fix variable dereferenced before check hdev->req Greg Kroah-Hartman
` (309 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chengchang Tang, Haoyue Xu,
Jason Gunthorpe, Sasha Levin
From: Chengchang Tang <tangchengchang@huawei.com>
[ Upstream commit 667d6164b84884c64de3fc18670cd5a98b0b10cf ]
The error code is fixed to EIO when CMD fails to excute. This patch
converts the error status reported by firmware to linux errno.
Fixes: a04ff739f2a9 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/20221126102911.2921820-6-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 26 +++++++++++++++++++++-
drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 5 +++++
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 16f39321b319..79d92b789984 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -1257,6 +1257,30 @@ static void update_cmdq_status(struct hns_roce_dev *hr_dev)
hr_dev->cmd.state = HNS_ROCE_CMDQ_STATE_FATAL_ERR;
}
+static int hns_roce_cmd_err_convert_errno(u16 desc_ret)
+{
+ struct hns_roce_cmd_errcode errcode_table[] = {
+ {CMD_EXEC_SUCCESS, 0},
+ {CMD_NO_AUTH, -EPERM},
+ {CMD_NOT_EXIST, -EOPNOTSUPP},
+ {CMD_CRQ_FULL, -EXFULL},
+ {CMD_NEXT_ERR, -ENOSR},
+ {CMD_NOT_EXEC, -ENOTBLK},
+ {CMD_PARA_ERR, -EINVAL},
+ {CMD_RESULT_ERR, -ERANGE},
+ {CMD_TIMEOUT, -ETIME},
+ {CMD_HILINK_ERR, -ENOLINK},
+ {CMD_INFO_ILLEGAL, -ENXIO},
+ {CMD_INVALID, -EBADR},
+ };
+ u16 i;
+
+ for (i = 0; i < ARRAY_SIZE(errcode_table); i++)
+ if (desc_ret == errcode_table[i].return_status)
+ return errcode_table[i].errno;
+ return -EIO;
+}
+
static int __hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
struct hns_roce_cmq_desc *desc, int num)
{
@@ -1301,7 +1325,7 @@ static int __hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
dev_err_ratelimited(hr_dev->dev,
"Cmdq IO error, opcode = %x, return = %x\n",
desc->opcode, desc_ret);
- ret = -EIO;
+ ret = hns_roce_cmd_err_convert_errno(desc_ret);
}
} else {
/* FW/HW reset or incorrect number of desc */
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
index 2f4a0019a716..67f5b6fcfa1b 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
@@ -276,6 +276,11 @@ enum hns_roce_cmd_return_status {
CMD_OTHER_ERR = 0xff
};
+struct hns_roce_cmd_errcode {
+ enum hns_roce_cmd_return_status return_status;
+ int errno;
+};
+
enum hns_roce_sgid_type {
GID_TYPE_FLAG_ROCE_V1 = 0,
GID_TYPE_FLAG_ROCE_V2_IPV4,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 433/731] crypto: img-hash - Fix variable dereferenced before check hdev->req
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (431 preceding siblings ...)
2022-12-28 14:38 ` [PATCH 5.15 432/731] RDMA/hns: Fix error code of CMD Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 434/731] hwrng: amd - Fix PCI device refcount leak Greg Kroah-Hartman
` (308 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Herbert Xu, Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit 04ba54e5af8f8f0137b08cb51a0b3a2e1ea46c94 ]
Smatch report warning as follows:
drivers/crypto/img-hash.c:366 img_hash_dma_task() warn: variable
dereferenced before check 'hdev->req'
Variable dereferenced should be done after check 'hdev->req',
fix it.
Fixes: d358f1abbf71 ("crypto: img-hash - Add Imagination Technologies hw hash accelerator")
Fixes: 10badea259fa ("crypto: img-hash - Fix null pointer exception")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/img-hash.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/img-hash.c b/drivers/crypto/img-hash.c
index aa4c7b2af3e2..34b41cbcfa8d 100644
--- a/drivers/crypto/img-hash.c
+++ b/drivers/crypto/img-hash.c
@@ -358,12 +358,16 @@ static int img_hash_dma_init(struct img_hash_dev *hdev)
static void img_hash_dma_task(unsigned long d)
{
struct img_hash_dev *hdev = (struct img_hash_dev *)d;
- struct img_hash_request_ctx *ctx = ahash_request_ctx(hdev->req);
+ struct img_hash_request_ctx *ctx;
u8 *addr;
size_t nbytes, bleft, wsend, len, tbc;
struct scatterlist tsg;
- if (!hdev->req || !ctx->sg)
+ if (!hdev->req)
+ return;
+
+ ctx = ahash_request_ctx(hdev->req);
+ if (!ctx->sg)
return;
addr = sg_virt(ctx->sg);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 434/731] hwrng: amd - Fix PCI device refcount leak
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (432 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 433/731] crypto: img-hash - Fix variable dereferenced before check hdev->req Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 435/731] hwrng: geode " Greg Kroah-Hartman
` (307 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang, Herbert Xu, Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit ecadb5b0111ea19fc7c240bb25d424a94471eb7d ]
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() for the normal and error path.
Fixes: 96d63c0297cc ("[PATCH] Add AMD HW RNG driver")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/hw_random/amd-rng.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/char/hw_random/amd-rng.c b/drivers/char/hw_random/amd-rng.c
index c22d4184bb61..0555e3838bce 100644
--- a/drivers/char/hw_random/amd-rng.c
+++ b/drivers/char/hw_random/amd-rng.c
@@ -143,15 +143,19 @@ static int __init amd_rng_mod_init(void)
found:
err = pci_read_config_dword(pdev, 0x58, &pmbase);
if (err)
- return err;
+ goto put_dev;
pmbase &= 0x0000FF00;
- if (pmbase == 0)
- return -EIO;
+ if (pmbase == 0) {
+ err = -EIO;
+ goto put_dev;
+ }
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
+ if (!priv) {
+ err = -ENOMEM;
+ goto put_dev;
+ }
if (!request_region(pmbase + PMBASE_OFFSET, PMBASE_SIZE, DRV_NAME)) {
dev_err(&pdev->dev, DRV_NAME " region 0x%x already in use!\n",
@@ -185,6 +189,8 @@ static int __init amd_rng_mod_init(void)
release_region(pmbase + PMBASE_OFFSET, PMBASE_SIZE);
out:
kfree(priv);
+put_dev:
+ pci_dev_put(pdev);
return err;
}
@@ -200,6 +206,8 @@ static void __exit amd_rng_mod_exit(void)
release_region(priv->pmbase + PMBASE_OFFSET, PMBASE_SIZE);
+ pci_dev_put(priv->pcidev);
+
kfree(priv);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 435/731] hwrng: geode - Fix PCI device refcount leak
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (433 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 434/731] hwrng: amd - Fix PCI device refcount leak Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 436/731] IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces Greg Kroah-Hartman
` (306 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang, Herbert Xu, Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit 9f6ec8dc574efb7f4f3d7ee9cd59ae307e78f445 ]
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. We add a new struct
'amd_geode_priv' to record pointer of the pci_dev and membase, and then
add missing pci_dev_put() for the normal and error path.
Fixes: ef5d862734b8 ("[PATCH] Add Geode HW RNG driver")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/hw_random/geode-rng.c | 36 +++++++++++++++++++++++-------
1 file changed, 28 insertions(+), 8 deletions(-)
diff --git a/drivers/char/hw_random/geode-rng.c b/drivers/char/hw_random/geode-rng.c
index 138ce434f86b..12fbe8091831 100644
--- a/drivers/char/hw_random/geode-rng.c
+++ b/drivers/char/hw_random/geode-rng.c
@@ -51,6 +51,10 @@ static const struct pci_device_id pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, pci_tbl);
+struct amd_geode_priv {
+ struct pci_dev *pcidev;
+ void __iomem *membase;
+};
static int geode_rng_data_read(struct hwrng *rng, u32 *data)
{
@@ -90,6 +94,7 @@ static int __init geode_rng_init(void)
const struct pci_device_id *ent;
void __iomem *mem;
unsigned long rng_base;
+ struct amd_geode_priv *priv;
for_each_pci_dev(pdev) {
ent = pci_match_id(pci_tbl, pdev);
@@ -97,17 +102,26 @@ static int __init geode_rng_init(void)
goto found;
}
/* Device not found. */
- goto out;
+ return err;
found:
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ err = -ENOMEM;
+ goto put_dev;
+ }
+
rng_base = pci_resource_start(pdev, 0);
if (rng_base == 0)
- goto out;
+ goto free_priv;
err = -ENOMEM;
mem = ioremap(rng_base, 0x58);
if (!mem)
- goto out;
- geode_rng.priv = (unsigned long)mem;
+ goto free_priv;
+
+ geode_rng.priv = (unsigned long)priv;
+ priv->membase = mem;
+ priv->pcidev = pdev;
pr_info("AMD Geode RNG detected\n");
err = hwrng_register(&geode_rng);
@@ -116,20 +130,26 @@ static int __init geode_rng_init(void)
err);
goto err_unmap;
}
-out:
return err;
err_unmap:
iounmap(mem);
- goto out;
+free_priv:
+ kfree(priv);
+put_dev:
+ pci_dev_put(pdev);
+ return err;
}
static void __exit geode_rng_exit(void)
{
- void __iomem *mem = (void __iomem *)geode_rng.priv;
+ struct amd_geode_priv *priv;
+ priv = (struct amd_geode_priv *)geode_rng.priv;
hwrng_unregister(&geode_rng);
- iounmap(mem);
+ iounmap(priv->membase);
+ pci_dev_put(priv->pcidev);
+ kfree(priv);
}
module_init(geode_rng_init);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 436/731] IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (434 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 435/731] hwrng: geode " Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 437/731] RISC-V: Align the shadow stack Greg Kroah-Hartman
` (305 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dragos Tatulea, Leon Romanovsky,
Sasha Levin
From: Dragos Tatulea <dtatulea@nvidia.com>
[ Upstream commit dbc94a0fb81771a38733c0e8f2ea8c4fa6934dc1 ]
There are 2 ways to create IPoIB PKEY child interfaces:
1) Writing a PKEY to /sys/class/net/<ib parent interface>/create_child.
2) Using netlink with iproute.
While with sysfs the child interface has the same number of tx and
rx queues as the parent, with netlink there will always be 1 tx
and 1 rx queue for the child interface. That's because the
get_num_tx/rx_queues() netlink ops are missing and the default value
of 1 is taken for the number of queues (in rtnl_create_link()).
This change adds the get_num_tx/rx_queues() ops which allows for
interfaces with multiple queues to be created over netlink. This
constant only represents the max number of tx and rx queues on that
net device.
Fixes: 9baa0b036410 ("IB/ipoib: Add rtnl_link_ops support")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/f4a42c8aa43c02d5ae5559a60c3e5e0f18c82531.1670485816.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_netlink.c b/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
index 5b05cf3837da..28e9b70844e4 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
@@ -42,6 +42,11 @@ static const struct nla_policy ipoib_policy[IFLA_IPOIB_MAX + 1] = {
[IFLA_IPOIB_UMCAST] = { .type = NLA_U16 },
};
+static unsigned int ipoib_get_max_num_queues(void)
+{
+ return min_t(unsigned int, num_possible_cpus(), 128);
+}
+
static int ipoib_fill_info(struct sk_buff *skb, const struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
@@ -173,6 +178,8 @@ static struct rtnl_link_ops ipoib_link_ops __read_mostly = {
.changelink = ipoib_changelink,
.get_size = ipoib_get_size,
.fill_info = ipoib_fill_info,
+ .get_num_rx_queues = ipoib_get_max_num_queues,
+ .get_num_tx_queues = ipoib_get_max_num_queues,
};
struct rtnl_link_ops *ipoib_get_link_ops(void)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 437/731] RISC-V: Align the shadow stack
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (435 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 436/731] IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 438/731] drivers: dio: fix possible memory leak in dio_init() Greg Kroah-Hartman
` (304 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jisheng Zhang, Palmer Dabbelt, Sasha Levin
From: Palmer Dabbelt <palmer@rivosinc.com>
[ Upstream commit b003b3b77d65133a0011ae3b7b255347438c12f6 ]
The standard RISC-V ABIs all require 16-byte stack alignment. We're
only calling that one function on the shadow stack so I doubt it'd
result in a real issue, but might as well keep this lined up.
Fixes: 31da94c25aea ("riscv: add VMAP_STACK overflow detection")
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221130023515.20217-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/riscv/kernel/traps.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
index 2f4cd85fb651..4102c97309cc 100644
--- a/arch/riscv/kernel/traps.c
+++ b/arch/riscv/kernel/traps.c
@@ -211,7 +211,7 @@ static DEFINE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)],
* shadow stack, handled_ kernel_ stack_ overflow(in kernel/entry.S) is used
* to get per-cpu overflow stack(get_overflow_stack).
*/
-long shadow_stack[SHADOW_OVERFLOW_STACK_SIZE/sizeof(long)];
+long shadow_stack[SHADOW_OVERFLOW_STACK_SIZE/sizeof(long)] __aligned(16);
asmlinkage unsigned long get_overflow_stack(void)
{
return (unsigned long)this_cpu_ptr(overflow_stack) +
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 438/731] drivers: dio: fix possible memory leak in dio_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (436 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 437/731] RISC-V: Align the shadow stack Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 439/731] serial: tegra: Read DMA status before terminating Greg Kroah-Hartman
` (303 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit e63e99397b2613d50a5f4f02ed07307e67a190f1 ]
If device_register() returns error, the 'dev' and name needs be
freed. Add a release function, and then call put_device() in the
error path, so the name is freed in kobject_cleanup() and to the
'dev' is freed in release function.
Fixes: 2e4c77bea3d8 ("m68k: dio - Kill warn_unused_result warnings")
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109064036.1835346-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dio/dio.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/dio/dio.c b/drivers/dio/dio.c
index 4c06c93c93d3..c7f7134adc21 100644
--- a/drivers/dio/dio.c
+++ b/drivers/dio/dio.c
@@ -110,6 +110,12 @@ static char dio_no_name[] = { 0 };
#endif /* CONFIG_DIO_CONSTANTS */
+static void dio_dev_release(struct device *dev)
+{
+ struct dio_dev *ddev = container_of(dev, typeof(struct dio_dev), dev);
+ kfree(ddev);
+}
+
int __init dio_find(int deviceid)
{
/* Called to find a DIO device before the full bus scan has run.
@@ -224,6 +230,7 @@ static int __init dio_init(void)
dev->bus = &dio_bus;
dev->dev.parent = &dio_bus.dev;
dev->dev.bus = &dio_bus_type;
+ dev->dev.release = dio_dev_release;
dev->scode = scode;
dev->resource.start = pa;
dev->resource.end = pa + DIO_SIZE(scode, va);
@@ -251,6 +258,7 @@ static int __init dio_init(void)
if (error) {
pr_err("DIO: Error registering device %s\n",
dev->name);
+ put_device(&dev->dev);
continue;
}
error = dio_create_sysfs_dev_files(dev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 439/731] serial: tegra: Read DMA status before terminating
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (437 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 438/731] drivers: dio: fix possible memory leak in dio_init() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 440/731] serial: 8250_bcm7271: Fix error handling in brcmuart_init() Greg Kroah-Hartman
` (302 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jon Hunter, Ilpo Järvinen,
Thierry Reding, Akhil R, Kartik, Sasha Levin
From: Kartik <kkartik@nvidia.com>
[ Upstream commit 109a951a9f1fd8a34ebd1896cbbd5d5cede880a7 ]
Read the DMA status before terminating the DMA, as doing so deletes
the DMA desc.
Also, to get the correct transfer status information, pause the DMA
using dmaengine_pause() before reading the DMA status.
Fixes: e9ea096dd225 ("serial: tegra: add serial driver")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Kartik <kkartik@nvidia.com>
Link: https://lore.kernel.org/r/1666105086-17326-1-git-send-email-kkartik@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/serial-tegra.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index d4dba298de7a..79187ff9ac13 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -619,8 +619,9 @@ static void tegra_uart_stop_tx(struct uart_port *u)
if (tup->tx_in_progress != TEGRA_UART_TX_DMA)
return;
- dmaengine_terminate_all(tup->tx_dma_chan);
+ dmaengine_pause(tup->tx_dma_chan);
dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state);
+ dmaengine_terminate_all(tup->tx_dma_chan);
count = tup->tx_bytes_requested - state.residue;
async_tx_ack(tup->tx_dma_desc);
uart_xmit_advance(&tup->uport, count);
@@ -763,8 +764,9 @@ static void tegra_uart_terminate_rx_dma(struct tegra_uart_port *tup)
return;
}
- dmaengine_terminate_all(tup->rx_dma_chan);
+ dmaengine_pause(tup->rx_dma_chan);
dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
+ dmaengine_terminate_all(tup->rx_dma_chan);
tegra_uart_rx_buffer_push(tup, state.residue);
tup->rx_dma_active = false;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 440/731] serial: 8250_bcm7271: Fix error handling in brcmuart_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (438 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 439/731] serial: tegra: Read DMA status before terminating Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 441/731] class: fix possible memory leak in __class_register() Greg Kroah-Hartman
` (301 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yuan Can, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 6a3ff858915fa8ca36c7eb02c87c9181ae2fc333 ]
A problem about 8250_bcm7271 create debugfs failed is triggered with the
following log given:
[ 324.516635] debugfs: Directory 'bcm7271-uart' with parent '/' already present!
The reason is that brcmuart_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of 8250_bcm7271 can never be created later.
brcmuart_init()
debugfs_create_dir() # create debugfs directory
platform_driver_register()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when platform_driver_register() returns error.
Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221109072110.117291-2-yuancan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/8250/8250_bcm7271.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 711cf30e835a..60b3ac1a0317 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -1214,9 +1214,17 @@ static struct platform_driver brcmuart_platform_driver = {
static int __init brcmuart_init(void)
{
+ int ret;
+
brcmuart_debugfs_root = debugfs_create_dir(
brcmuart_platform_driver.driver.name, NULL);
- return platform_driver_register(&brcmuart_platform_driver);
+ ret = platform_driver_register(&brcmuart_platform_driver);
+ if (ret) {
+ debugfs_remove_recursive(brcmuart_debugfs_root);
+ return ret;
+ }
+
+ return 0;
}
module_init(brcmuart_init);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 441/731] class: fix possible memory leak in __class_register()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (439 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 440/731] serial: 8250_bcm7271: Fix error handling in brcmuart_init() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 442/731] vfio: platform: Do not pass return buffer to ACPI _RST method Greg Kroah-Hartman
` (300 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 8c3e8a6bdb5253b97ad532570f8b5db5f7a06407 ]
If class_add_groups() returns error, the 'cp->subsys' need be
unregister, and the 'cp' need be freed.
We can not call kset_unregister() here, because the 'cls' will
be freed in callback function class_release() and it's also
freed in caller's error path, it will cause double free.
So fix this by calling kobject_del() and kfree_const(name) to
cleanup kobject. Besides, call kfree() to free the 'cp'.
Fault injection test can trigger this:
unreferenced object 0xffff888102fa8190 (size 8):
comm "modprobe", pid 502, jiffies 4294906074 (age 49.296s)
hex dump (first 8 bytes):
70 6b 74 63 64 76 64 00 pktcdvd.
backtrace:
[<00000000e7c7703d>] __kmalloc_track_caller+0x1ae/0x320
[<000000005e4d70bc>] kstrdup+0x3a/0x70
[<00000000c2e5e85a>] kstrdup_const+0x68/0x80
[<000000000049a8c7>] kvasprintf_const+0x10b/0x190
[<0000000029123163>] kobject_set_name_vargs+0x56/0x150
[<00000000747219c9>] kobject_set_name+0xab/0xe0
[<0000000005f1ea4e>] __class_register+0x15c/0x49a
unreferenced object 0xffff888037274000 (size 1024):
comm "modprobe", pid 502, jiffies 4294906074 (age 49.296s)
hex dump (first 32 bytes):
00 40 27 37 80 88 ff ff 00 40 27 37 80 88 ff ff .@'7.....@'7....
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
backtrace:
[<00000000151f9600>] kmem_cache_alloc_trace+0x17c/0x2f0
[<00000000ecf3dd95>] __class_register+0x86/0x49a
Fixes: ced6473e7486 ("driver core: class: add class_groups support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221026082803.3458760-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/class.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 7476f393df97..0e44a68e90a0 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -192,6 +192,11 @@ int __class_register(struct class *cls, struct lock_class_key *key)
}
error = class_add_groups(class_get(cls), cls->class_groups);
class_put(cls);
+ if (error) {
+ kobject_del(&cp->subsys.kobj);
+ kfree_const(cp->subsys.kobj.name);
+ kfree(cp);
+ }
return error;
}
EXPORT_SYMBOL_GPL(__class_register);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 442/731] vfio: platform: Do not pass return buffer to ACPI _RST method
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (440 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 441/731] class: fix possible memory leak in __class_register() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 443/731] uio: uio_dmem_genirq: Fix missing unlock in irq configuration Greg Kroah-Hartman
` (299 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rafael Mendonca, Eric Auger,
Alex Williamson, Sasha Levin
From: Rafael Mendonca <rafaelmendsr@gmail.com>
[ Upstream commit e67e070632a665c932d534b8b800477bb3111449 ]
The ACPI _RST method has no return value, there's no need to pass a return
buffer to acpi_evaluate_object().
Fixes: d30daa33ec1d ("vfio: platform: call _RST method when using ACPI")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20221018152825.891032-1-rafaelmendsr@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/vfio/platform/vfio_platform_common.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
index 6af7ce7d619c..701bd99a8719 100644
--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -72,12 +72,11 @@ static int vfio_platform_acpi_call_reset(struct vfio_platform_device *vdev,
const char **extra_dbg)
{
#ifdef CONFIG_ACPI
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct device *dev = vdev->device;
acpi_handle handle = ACPI_HANDLE(dev);
acpi_status acpi_ret;
- acpi_ret = acpi_evaluate_object(handle, "_RST", NULL, &buffer);
+ acpi_ret = acpi_evaluate_object(handle, "_RST", NULL, NULL);
if (ACPI_FAILURE(acpi_ret)) {
if (extra_dbg)
*extra_dbg = acpi_format_exception(acpi_ret);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 443/731] uio: uio_dmem_genirq: Fix missing unlock in irq configuration
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (441 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 442/731] vfio: platform: Do not pass return buffer to ACPI _RST method Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 444/731] uio: uio_dmem_genirq: Fix deadlock between irq config and handling Greg Kroah-Hartman
` (298 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Rafael Mendonca, Sasha Levin
From: Rafael Mendonca <rafaelmendsr@gmail.com>
[ Upstream commit 9de255c461d1b3f0242b3ad1450c3323a3e00b34 ]
Commit b74351287d4b ("uio: fix a sleep-in-atomic-context bug in
uio_dmem_genirq_irqcontrol()") started calling disable_irq() without
holding the spinlock because it can sleep. However, that fix introduced
another bug: if interrupt is already disabled and a new disable request
comes in, then the spinlock is not unlocked:
root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0
root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0
root@localhost:~# [ 14.851538] BUG: scheduling while atomic: bash/223/0x00000002
[ 14.851991] Modules linked in: uio_dmem_genirq uio myfpga(OE) bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper drm snd_pcm ppdev joydev psmouse snd_timer snd e1000fb_sys_fops syscopyarea parport sysfillrect soundcore sysimgblt input_leds pcspkr i2c_piix4 serio_raw floppy evbug qemu_fw_cfg mac_hid pata_acpi ip_tables x_tables autofs4 [last unloaded: parport_pc]
[ 14.854206] CPU: 0 PID: 223 Comm: bash Tainted: G OE 6.0.0-rc7 #21
[ 14.854786] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 14.855664] Call Trace:
[ 14.855861] <TASK>
[ 14.856025] dump_stack_lvl+0x4d/0x67
[ 14.856325] dump_stack+0x14/0x1a
[ 14.856583] __schedule_bug.cold+0x4b/0x5c
[ 14.856915] __schedule+0xe81/0x13d0
[ 14.857199] ? idr_find+0x13/0x20
[ 14.857456] ? get_work_pool+0x2d/0x50
[ 14.857756] ? __flush_work+0x233/0x280
[ 14.858068] ? __schedule+0xa95/0x13d0
[ 14.858307] ? idr_find+0x13/0x20
[ 14.858519] ? get_work_pool+0x2d/0x50
[ 14.858798] schedule+0x6c/0x100
[ 14.859009] schedule_hrtimeout_range_clock+0xff/0x110
[ 14.859335] ? tty_write_room+0x1f/0x30
[ 14.859598] ? n_tty_poll+0x1ec/0x220
[ 14.859830] ? tty_ldisc_deref+0x1a/0x20
[ 14.860090] schedule_hrtimeout_range+0x17/0x20
[ 14.860373] do_select+0x596/0x840
[ 14.860627] ? __kernel_text_address+0x16/0x50
[ 14.860954] ? poll_freewait+0xb0/0xb0
[ 14.861235] ? poll_freewait+0xb0/0xb0
[ 14.861517] ? rpm_resume+0x49d/0x780
[ 14.861798] ? common_interrupt+0x59/0xa0
[ 14.862127] ? asm_common_interrupt+0x2b/0x40
[ 14.862511] ? __uart_start.isra.0+0x61/0x70
[ 14.862902] ? __check_object_size+0x61/0x280
[ 14.863255] core_sys_select+0x1c6/0x400
[ 14.863575] ? vfs_write+0x1c9/0x3d0
[ 14.863853] ? vfs_write+0x1c9/0x3d0
[ 14.864121] ? _copy_from_user+0x45/0x70
[ 14.864526] do_pselect.constprop.0+0xb3/0xf0
[ 14.864893] ? do_syscall_64+0x6d/0x90
[ 14.865228] ? do_syscall_64+0x6d/0x90
[ 14.865556] __x64_sys_pselect6+0x76/0xa0
[ 14.865906] do_syscall_64+0x60/0x90
[ 14.866214] ? syscall_exit_to_user_mode+0x2a/0x50
[ 14.866640] ? do_syscall_64+0x6d/0x90
[ 14.866972] ? do_syscall_64+0x6d/0x90
[ 14.867286] ? do_syscall_64+0x6d/0x90
[ 14.867626] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...] stripped
[ 14.872959] </TASK>
('myfpga' is a simple 'uio_dmem_genirq' driver I wrote to test this)
The implementation of "uio_dmem_genirq" was based on "uio_pdrv_genirq" and
it is used in a similar manner to the "uio_pdrv_genirq" driver with respect
to interrupt configuration and handling. At the time "uio_dmem_genirq" was
introduced, both had the same implementation of the 'uio_info' handlers
irqcontrol() and handler(). Then commit 34cb27528398 ("UIO: Fix concurrency
issue"), which was only applied to "uio_pdrv_genirq", ended up making them
a little different. That commit, among other things, changed disable_irq()
to disable_irq_nosync() in the implementation of irqcontrol(). The
motivation there was to avoid a deadlock between irqcontrol() and
handler(), since it added a spinlock in the irq handler, and disable_irq()
waits for the completion of the irq handler.
By changing disable_irq() to disable_irq_nosync() in irqcontrol(), we also
avoid the sleeping-while-atomic bug that commit b74351287d4b ("uio: fix a
sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()") was trying to
fix. Thus, this fixes the missing unlock in irqcontrol() by importing the
implementation of irqcontrol() handler from the "uio_pdrv_genirq" driver.
In the end, it reverts commit b74351287d4b ("uio: fix a
sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()") and change
disable_irq() to disable_irq_nosync().
It is worth noting that this still does not address the concurrency issue
fixed by commit 34cb27528398 ("UIO: Fix concurrency issue"). It will be
addressed separately in the next commits.
Split out from commit 34cb27528398 ("UIO: Fix concurrency issue").
Fixes: b74351287d4b ("uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220930224100.816175-2-rafaelmendsr@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/uio/uio_dmem_genirq.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c
index 6b5cfa5b0673..bfaedc324104 100644
--- a/drivers/uio/uio_dmem_genirq.c
+++ b/drivers/uio/uio_dmem_genirq.c
@@ -132,13 +132,11 @@ static int uio_dmem_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
if (irq_on) {
if (test_and_clear_bit(0, &priv->flags))
enable_irq(dev_info->irq);
- spin_unlock_irqrestore(&priv->lock, flags);
} else {
- if (!test_and_set_bit(0, &priv->flags)) {
- spin_unlock_irqrestore(&priv->lock, flags);
- disable_irq(dev_info->irq);
- }
+ if (!test_and_set_bit(0, &priv->flags))
+ disable_irq_nosync(dev_info->irq);
}
+ spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 444/731] uio: uio_dmem_genirq: Fix deadlock between irq config and handling
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (442 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 443/731] uio: uio_dmem_genirq: Fix missing unlock in irq configuration Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 445/731] usb: fotg210-udc: Fix ages old endianness issues Greg Kroah-Hartman
` (297 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Rafael Mendonca, Sasha Levin
From: Rafael Mendonca <rafaelmendsr@gmail.com>
[ Upstream commit 118b918018175d9fcd8db667f905012e986cc2c9 ]
This fixes a concurrency issue addressed in commit 34cb27528398 ("UIO: Fix
concurrency issue"):
"In a SMP case there was a race condition issue between
Uio_pdrv_genirq_irqcontrol() running on one CPU and irq handler on
another CPU. Fix it by spin_locking shared resources access inside irq
handler."
The implementation of "uio_dmem_genirq" was based on "uio_pdrv_genirq" and
it is used in a similar manner to the "uio_pdrv_genirq" driver with respect
to interrupt configuration and handling. At the time "uio_dmem_genirq" was
merged, both had the same implementation of the 'uio_info' handlers
irqcontrol() and handler(), thus, both had the same concurrency issue
mentioned by the above commit. However, the above patch was only applied to
the "uio_pdrv_genirq" driver.
Split out from commit 34cb27528398 ("UIO: Fix concurrency issue").
Fixes: 0a0c3b5a24bd ("Add new uio device for dynamic memory allocation")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220930224100.816175-3-rafaelmendsr@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/uio/uio_dmem_genirq.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c
index bfaedc324104..28be820b546e 100644
--- a/drivers/uio/uio_dmem_genirq.c
+++ b/drivers/uio/uio_dmem_genirq.c
@@ -110,8 +110,10 @@ static irqreturn_t uio_dmem_genirq_handler(int irq, struct uio_info *dev_info)
* remember the state so we can allow user space to enable it later.
*/
+ spin_lock(&priv->lock);
if (!test_and_set_bit(0, &priv->flags))
disable_irq_nosync(irq);
+ spin_unlock(&priv->lock);
return IRQ_HANDLED;
}
@@ -125,7 +127,8 @@ static int uio_dmem_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
* in the interrupt controller, but keep track of the
* state to prevent per-irq depth damage.
*
- * Serialize this operation to support multiple tasks.
+ * Serialize this operation to support multiple tasks and concurrency
+ * with irq handler on SMP systems.
*/
spin_lock_irqsave(&priv->lock, flags);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 445/731] usb: fotg210-udc: Fix ages old endianness issues
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (443 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 444/731] uio: uio_dmem_genirq: Fix deadlock between irq config and handling Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 446/731] staging: vme_user: Fix possible UAF in tsi148_dma_list_add Greg Kroah-Hartman
` (296 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernel test robot, Linus Walleij,
Sasha Levin
From: Linus Walleij <linus.walleij@linaro.org>
[ Upstream commit 46ed6026ca2181c917c8334a82e3eaf40a6234dd ]
The code in the FOTG210 driver isn't entirely endianness-agnostic
as reported by the kernel robot sparse testing. This came to
the surface while moving the files around.
The driver is only used on little-endian systems, so this causes
no real-world regression, but it is nice to be strict and have
some compile coverage also on big endian machines, so fix it
up with the right LE accessors.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-usb/202211110910.0dJ7nZCn-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221111090317.94228-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/fotg210-udc.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index fdca28e72a3b..d0e051beb3af 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -629,10 +629,10 @@ static void fotg210_request_error(struct fotg210_udc *fotg210)
static void fotg210_set_address(struct fotg210_udc *fotg210,
struct usb_ctrlrequest *ctrl)
{
- if (ctrl->wValue >= 0x0100) {
+ if (le16_to_cpu(ctrl->wValue) >= 0x0100) {
fotg210_request_error(fotg210);
} else {
- fotg210_set_dev_addr(fotg210, ctrl->wValue);
+ fotg210_set_dev_addr(fotg210, le16_to_cpu(ctrl->wValue));
fotg210_set_cxdone(fotg210);
}
}
@@ -713,17 +713,17 @@ static void fotg210_get_status(struct fotg210_udc *fotg210,
switch (ctrl->bRequestType & USB_RECIP_MASK) {
case USB_RECIP_DEVICE:
- fotg210->ep0_data = 1 << USB_DEVICE_SELF_POWERED;
+ fotg210->ep0_data = cpu_to_le16(1 << USB_DEVICE_SELF_POWERED);
break;
case USB_RECIP_INTERFACE:
- fotg210->ep0_data = 0;
+ fotg210->ep0_data = cpu_to_le16(0);
break;
case USB_RECIP_ENDPOINT:
epnum = ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK;
if (epnum)
fotg210->ep0_data =
- fotg210_is_epnstall(fotg210->ep[epnum])
- << USB_ENDPOINT_HALT;
+ cpu_to_le16(fotg210_is_epnstall(fotg210->ep[epnum])
+ << USB_ENDPOINT_HALT);
else
fotg210_request_error(fotg210);
break;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 446/731] staging: vme_user: Fix possible UAF in tsi148_dma_list_add
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (444 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 445/731] usb: fotg210-udc: Fix ages old endianness issues Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 447/731] usb: typec: Check for ops->exit instead of ops->enter in altmode_exit Greg Kroah-Hartman
` (295 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit 357057ee55d3c99a5de5abe8150f7bca04f8e53b ]
Smatch report warning as follows:
drivers/staging/vme_user/vme_tsi148.c:1757 tsi148_dma_list_add() warn:
'&entry->list' not removed from list
In tsi148_dma_list_add(), the error path "goto err_dma" will not
remove entry->list from list->entries, but entry will be freed,
then list traversal may cause UAF.
Fix by removeing it from list->entries before free().
Fixes: b2383c90a9d6 ("vme: tsi148: fix first DMA item mapping")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221117035914.2954454-1-cuigaosheng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/vme/bridges/vme_tsi148.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
index be9051b02f24..5b4c766d15e6 100644
--- a/drivers/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -1765,6 +1765,7 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
return 0;
err_dma:
+ list_del(&entry->list);
err_dest:
err_source:
err_align:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 447/731] usb: typec: Check for ops->exit instead of ops->enter in altmode_exit
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (445 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 446/731] staging: vme_user: Fix possible UAF in tsi148_dma_list_add Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 448/731] usb: typec: tcpci: fix of node refcount leak in tcpci_register_port() Greg Kroah-Hartman
` (294 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sven Peter, Heikki Krogerus, Sasha Levin
From: Sven Peter <sven@svenpeter.dev>
[ Upstream commit b6ddd180e3d9f92c1e482b3cdeec7dda086b1341 ]
typec_altmode_exit checks if ops->enter is not NULL but then calls
ops->exit a few lines below. Fix that and check for the function
pointer it's about to call instead.
Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221114165924.33487-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/typec/bus.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c
index 78e0e78954f2..0aefb9e14f22 100644
--- a/drivers/usb/typec/bus.c
+++ b/drivers/usb/typec/bus.c
@@ -134,7 +134,7 @@ int typec_altmode_exit(struct typec_altmode *adev)
if (!adev || !adev->active)
return 0;
- if (!pdev->ops || !pdev->ops->enter)
+ if (!pdev->ops || !pdev->ops->exit)
return -EOPNOTSUPP;
/* Moving to USB Safe State */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 448/731] usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (446 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 447/731] usb: typec: Check for ops->exit instead of ops->enter in altmode_exit Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 449/731] usb: typec: tipd: Cleanup resources if devm_tps6598_psy_register fails Greg Kroah-Hartman
` (293 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Heikki Krogerus,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 0384e87e3fec735e47f1c133c796f32ef7a72a9b ]
I got the following report while doing device(mt6370-tcpc) load
test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /i2c/pmic@34/tcpc/connector
The 'fwnode' set in tcpci_parse_config() which is called
in tcpci_register_port(), its node refcount is increased
in device_get_named_child_node(). It needs be put while
exiting, so call fwnode_handle_put() in the error path of
tcpci_register_port() and in tcpci_unregister_port() to
avoid leak.
Fixes: 5e85a04c8c0d ("usb: typec: add fwnode to tcpc")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221121062416.1026192-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/typec/tcpm/tcpci.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index 64e248117c41..5340a3a3a81b 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -817,8 +817,10 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
return ERR_PTR(err);
tcpci->port = tcpm_register_port(tcpci->dev, &tcpci->tcpc);
- if (IS_ERR(tcpci->port))
+ if (IS_ERR(tcpci->port)) {
+ fwnode_handle_put(tcpci->tcpc.fwnode);
return ERR_CAST(tcpci->port);
+ }
return tcpci;
}
@@ -827,6 +829,7 @@ EXPORT_SYMBOL_GPL(tcpci_register_port);
void tcpci_unregister_port(struct tcpci *tcpci)
{
tcpm_unregister_port(tcpci->port);
+ fwnode_handle_put(tcpci->tcpc.fwnode);
}
EXPORT_SYMBOL_GPL(tcpci_unregister_port);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 449/731] usb: typec: tipd: Cleanup resources if devm_tps6598_psy_register fails
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (447 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 448/731] usb: typec: tcpci: fix of node refcount leak in tcpci_register_port() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 450/731] usb: typec: tipd: Fix spurious fwnode_handle_put in error path Greg Kroah-Hartman
` (292 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sven Peter, Heikki Krogerus, Sasha Levin
From: Sven Peter <sven@svenpeter.dev>
[ Upstream commit 19c220e9ab00f50edefb9667e3101e84a5112df2 ]
We can't just return if devm_tps6598_psy_register fails since previous
resources are not devres managed and have yet to be cleaned up.
Fixes: 10eb0b6ac63a ("usb: typec: tps6598x: Export some power supply properties")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221114174449.34634-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/typec/tipd/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index 23a8b9b0b1fe..dd35b3ee2c5a 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -684,7 +684,7 @@ static int tps6598x_probe(struct i2c_client *client)
ret = devm_tps6598_psy_register(tps);
if (ret)
- return ret;
+ goto err_role_put;
tps->port = typec_register_port(&client->dev, &typec_cap);
if (IS_ERR(tps->port)) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 450/731] usb: typec: tipd: Fix spurious fwnode_handle_put in error path
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (448 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 449/731] usb: typec: tipd: Cleanup resources if devm_tps6598_psy_register fails Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 451/731] extcon: usbc-tusb320: Add support for mode setting and reset Greg Kroah-Hartman
` (291 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sven Peter, Heikki Krogerus, Sasha Levin
From: Sven Peter <sven@svenpeter.dev>
[ Upstream commit 782c70edc4852a5d39be12377a85501546236212 ]
The err_role_put error path always calls fwnode_handle_put to release
the fwnode. This path can be reached after probe itself has already
released that fwnode though. Fix that by moving fwnode_handle_put in the
happy path to the very end.
Fixes: 18a6c866bb19 ("usb: typec: tps6598x: Add USB role switching logic")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221114174449.34634-2-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/typec/tipd/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index dd35b3ee2c5a..2f32c3fceef8 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -691,7 +691,6 @@ static int tps6598x_probe(struct i2c_client *client)
ret = PTR_ERR(tps->port);
goto err_role_put;
}
- fwnode_handle_put(fwnode);
if (status & TPS_STATUS_PLUG_PRESENT) {
ret = tps6598x_connect(tps, status);
@@ -710,6 +709,7 @@ static int tps6598x_probe(struct i2c_client *client)
}
i2c_set_clientdata(client, tps);
+ fwnode_handle_put(fwnode);
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 451/731] extcon: usbc-tusb320: Add support for mode setting and reset
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (449 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 450/731] usb: typec: tipd: Fix spurious fwnode_handle_put in error path Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 452/731] extcon: usbc-tusb320: Add support for TUSB320L Greg Kroah-Hartman
` (290 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yassine Oudjana, Chanwoo Choi, Sasha Levin
From: Yassine Oudjana <y.oudjana@protonmail.com>
[ Upstream commit 70c55d6be634e5f9894169340f3fe5c73f53ac2d ]
Reset the chip and set its mode to default (maintain mode set by PORT pin)
during probe to make sure it comes up in the default state.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stable-dep-of: 581c848b610d ("extcon: usbc-tusb320: Update state on probe even if no IRQ pending")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/extcon/extcon-usbc-tusb320.c | 85 ++++++++++++++++++++++++++--
1 file changed, 81 insertions(+), 4 deletions(-)
diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
index 805af73b4152..1ed1dfe54206 100644
--- a/drivers/extcon/extcon-usbc-tusb320.c
+++ b/drivers/extcon/extcon-usbc-tusb320.c
@@ -19,15 +19,32 @@
#define TUSB320_REG9_ATTACHED_STATE_MASK 0x3
#define TUSB320_REG9_CABLE_DIRECTION BIT(5)
#define TUSB320_REG9_INTERRUPT_STATUS BIT(4)
-#define TUSB320_ATTACHED_STATE_NONE 0x0
-#define TUSB320_ATTACHED_STATE_DFP 0x1
-#define TUSB320_ATTACHED_STATE_UFP 0x2
-#define TUSB320_ATTACHED_STATE_ACC 0x3
+
+#define TUSB320_REGA 0xa
+#define TUSB320_REGA_I2C_SOFT_RESET BIT(3)
+#define TUSB320_REGA_MODE_SELECT_SHIFT 4
+#define TUSB320_REGA_MODE_SELECT_MASK 0x3
+
+enum tusb320_attached_state {
+ TUSB320_ATTACHED_STATE_NONE,
+ TUSB320_ATTACHED_STATE_DFP,
+ TUSB320_ATTACHED_STATE_UFP,
+ TUSB320_ATTACHED_STATE_ACC,
+};
+
+enum tusb320_mode {
+ TUSB320_MODE_PORT,
+ TUSB320_MODE_UFP,
+ TUSB320_MODE_DFP,
+ TUSB320_MODE_DRP,
+};
struct tusb320_priv {
struct device *dev;
struct regmap *regmap;
struct extcon_dev *edev;
+
+ enum tusb320_attached_state state;
};
static const char * const tusb_attached_states[] = {
@@ -62,6 +79,53 @@ static int tusb320_check_signature(struct tusb320_priv *priv)
return 0;
}
+static int tusb320_set_mode(struct tusb320_priv *priv, enum tusb320_mode mode)
+{
+ int ret;
+
+ /* Mode cannot be changed while cable is attached */
+ if (priv->state != TUSB320_ATTACHED_STATE_NONE)
+ return -EBUSY;
+
+ /* Write mode */
+ ret = regmap_write_bits(priv->regmap, TUSB320_REGA,
+ TUSB320_REGA_MODE_SELECT_MASK << TUSB320_REGA_MODE_SELECT_SHIFT,
+ mode << TUSB320_REGA_MODE_SELECT_SHIFT);
+ if (ret) {
+ dev_err(priv->dev, "failed to write mode: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int tusb320_reset(struct tusb320_priv *priv)
+{
+ int ret;
+
+ /* Set mode to default (follow PORT pin) */
+ ret = tusb320_set_mode(priv, TUSB320_MODE_PORT);
+ if (ret && ret != -EBUSY) {
+ dev_err(priv->dev,
+ "failed to set mode to PORT: %d\n", ret);
+ return ret;
+ }
+
+ /* Perform soft reset */
+ ret = regmap_write_bits(priv->regmap, TUSB320_REGA,
+ TUSB320_REGA_I2C_SOFT_RESET, 1);
+ if (ret) {
+ dev_err(priv->dev,
+ "failed to write soft reset bit: %d\n", ret);
+ return ret;
+ }
+
+ /* Wait for chip to go through reset */
+ msleep(95);
+
+ return 0;
+}
+
static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
{
struct tusb320_priv *priv = dev_id;
@@ -96,6 +160,8 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
extcon_sync(priv->edev, EXTCON_USB);
extcon_sync(priv->edev, EXTCON_USB_HOST);
+ priv->state = state;
+
regmap_write(priv->regmap, TUSB320_REG9, reg);
return IRQ_HANDLED;
@@ -145,6 +211,17 @@ static int tusb320_extcon_probe(struct i2c_client *client,
/* update initial state */
tusb320_irq_handler(client->irq, priv);
+ /* Reset chip to its default state */
+ ret = tusb320_reset(priv);
+ if (ret)
+ dev_warn(priv->dev, "failed to reset chip: %d\n", ret);
+ else
+ /*
+ * State and polarity might change after a reset, so update
+ * them again and make sure the interrupt status bit is cleared.
+ */
+ tusb320_irq_handler(client->irq, priv);
+
ret = devm_request_threaded_irq(priv->dev, client->irq, NULL,
tusb320_irq_handler,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 452/731] extcon: usbc-tusb320: Add support for TUSB320L
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (450 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 451/731] extcon: usbc-tusb320: Add support for mode setting and reset Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 453/731] usb: typec: Factor out non-PD fwnode properties Greg Kroah-Hartman
` (289 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yassine Oudjana, Chanwoo Choi, Sasha Levin
From: Yassine Oudjana <y.oudjana@protonmail.com>
[ Upstream commit ce0320bd3872038569be360870e2d5251b975692 ]
TUSB320L is a newer chip with additional features, and it has additional steps
in its mode changing sequence:
- Disable CC state machine,
- Write to mode register,
- Wait for 5 ms,
- Re-enable CC state machine.
It also has an additional register that a revision number can be read from.
Add support for the mode changing sequence, and read the revision number during
probe and print it as info.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stable-dep-of: 581c848b610d ("extcon: usbc-tusb320: Update state on probe even if no IRQ pending")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/extcon/extcon-usbc-tusb320.c | 82 +++++++++++++++++++++++++++-
1 file changed, 79 insertions(+), 3 deletions(-)
diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
index 1ed1dfe54206..6ba3d89b106d 100644
--- a/drivers/extcon/extcon-usbc-tusb320.c
+++ b/drivers/extcon/extcon-usbc-tusb320.c
@@ -21,10 +21,13 @@
#define TUSB320_REG9_INTERRUPT_STATUS BIT(4)
#define TUSB320_REGA 0xa
+#define TUSB320L_REGA_DISABLE_TERM BIT(0)
#define TUSB320_REGA_I2C_SOFT_RESET BIT(3)
#define TUSB320_REGA_MODE_SELECT_SHIFT 4
#define TUSB320_REGA_MODE_SELECT_MASK 0x3
+#define TUSB320L_REGA0_REVISION 0xa0
+
enum tusb320_attached_state {
TUSB320_ATTACHED_STATE_NONE,
TUSB320_ATTACHED_STATE_DFP,
@@ -39,11 +42,18 @@ enum tusb320_mode {
TUSB320_MODE_DRP,
};
+struct tusb320_priv;
+
+struct tusb320_ops {
+ int (*set_mode)(struct tusb320_priv *priv, enum tusb320_mode mode);
+ int (*get_revision)(struct tusb320_priv *priv, unsigned int *revision);
+};
+
struct tusb320_priv {
struct device *dev;
struct regmap *regmap;
struct extcon_dev *edev;
-
+ struct tusb320_ops *ops;
enum tusb320_attached_state state;
};
@@ -99,12 +109,46 @@ static int tusb320_set_mode(struct tusb320_priv *priv, enum tusb320_mode mode)
return 0;
}
+static int tusb320l_set_mode(struct tusb320_priv *priv, enum tusb320_mode mode)
+{
+ int ret;
+
+ /* Disable CC state machine */
+ ret = regmap_write_bits(priv->regmap, TUSB320_REGA,
+ TUSB320L_REGA_DISABLE_TERM, 1);
+ if (ret) {
+ dev_err(priv->dev,
+ "failed to disable CC state machine: %d\n", ret);
+ return ret;
+ }
+
+ /* Write mode */
+ ret = regmap_write_bits(priv->regmap, TUSB320_REGA,
+ TUSB320_REGA_MODE_SELECT_MASK << TUSB320_REGA_MODE_SELECT_SHIFT,
+ mode << TUSB320_REGA_MODE_SELECT_SHIFT);
+ if (ret) {
+ dev_err(priv->dev, "failed to write mode: %d\n", ret);
+ goto err;
+ }
+
+ msleep(5);
+err:
+ /* Re-enable CC state machine */
+ ret = regmap_write_bits(priv->regmap, TUSB320_REGA,
+ TUSB320L_REGA_DISABLE_TERM, 0);
+ if (ret)
+ dev_err(priv->dev,
+ "failed to re-enable CC state machine: %d\n", ret);
+
+ return ret;
+}
+
static int tusb320_reset(struct tusb320_priv *priv)
{
int ret;
/* Set mode to default (follow PORT pin) */
- ret = tusb320_set_mode(priv, TUSB320_MODE_PORT);
+ ret = priv->ops->set_mode(priv, TUSB320_MODE_PORT);
if (ret && ret != -EBUSY) {
dev_err(priv->dev,
"failed to set mode to PORT: %d\n", ret);
@@ -126,6 +170,20 @@ static int tusb320_reset(struct tusb320_priv *priv)
return 0;
}
+static int tusb320l_get_revision(struct tusb320_priv *priv, unsigned int *revision)
+{
+ return regmap_read(priv->regmap, TUSB320L_REGA0_REVISION, revision);
+}
+
+static struct tusb320_ops tusb320_ops = {
+ .set_mode = tusb320_set_mode,
+};
+
+static struct tusb320_ops tusb320l_ops = {
+ .set_mode = tusb320l_set_mode,
+ .get_revision = tusb320l_get_revision,
+};
+
static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
{
struct tusb320_priv *priv = dev_id;
@@ -176,6 +234,8 @@ static int tusb320_extcon_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct tusb320_priv *priv;
+ const void *match_data;
+ unsigned int revision;
int ret;
priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
@@ -191,12 +251,27 @@ static int tusb320_extcon_probe(struct i2c_client *client,
if (ret)
return ret;
+ match_data = device_get_match_data(&client->dev);
+ if (!match_data)
+ return -EINVAL;
+
+ priv->ops = (struct tusb320_ops*)match_data;
+
priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable);
if (IS_ERR(priv->edev)) {
dev_err(priv->dev, "failed to allocate extcon device\n");
return PTR_ERR(priv->edev);
}
+ if (priv->ops->get_revision) {
+ ret = priv->ops->get_revision(priv, &revision);
+ if (ret)
+ dev_warn(priv->dev,
+ "failed to read revision register: %d\n", ret);
+ else
+ dev_info(priv->dev, "chip revision %d\n", revision);
+ }
+
ret = devm_extcon_dev_register(priv->dev, priv->edev);
if (ret < 0) {
dev_err(priv->dev, "failed to register extcon device\n");
@@ -231,7 +306,8 @@ static int tusb320_extcon_probe(struct i2c_client *client,
}
static const struct of_device_id tusb320_extcon_dt_match[] = {
- { .compatible = "ti,tusb320", },
+ { .compatible = "ti,tusb320", .data = &tusb320_ops, },
+ { .compatible = "ti,tusb320l", .data = &tusb320l_ops, },
{ }
};
MODULE_DEVICE_TABLE(of, tusb320_extcon_dt_match);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 453/731] usb: typec: Factor out non-PD fwnode properties
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (451 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 452/731] extcon: usbc-tusb320: Add support for TUSB320L Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 454/731] extcon: usbc-tusb320: Factor out extcon into dedicated functions Greg Kroah-Hartman
` (288 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Heikki Krogerus, Samuel Holland,
Sasha Levin
From: Samuel Holland <samuel@sholland.org>
[ Upstream commit 2e7dfb0e9cacad0f1adbc4b97f0b96ba35027f24 ]
Basic programmable non-PD Type-C port controllers do not need the full
TCPM library, but they share the same devicetree binding and the same
typec_capability structure. Factor out a helper for parsing those
properties which map to fields in struct typec_capability, so the code
can be shared between TCPM and basic non-TCPM drivers.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220214050118.61015-4-samuel@sholland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 581c848b610d ("extcon: usbc-tusb320: Update state on probe even if no IRQ pending")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/typec/class.c | 43 +++++++++++++++++++++++++++++++++++
drivers/usb/typec/tcpm/tcpm.c | 24 +------------------
include/linux/usb/typec.h | 3 +++
3 files changed, 47 insertions(+), 23 deletions(-)
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index ff6c14d7b1a8..339752fef65e 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -1895,6 +1895,49 @@ void *typec_get_drvdata(struct typec_port *port)
}
EXPORT_SYMBOL_GPL(typec_get_drvdata);
+int typec_get_fw_cap(struct typec_capability *cap,
+ struct fwnode_handle *fwnode)
+{
+ const char *cap_str;
+ int ret;
+
+ cap->fwnode = fwnode;
+
+ ret = fwnode_property_read_string(fwnode, "power-role", &cap_str);
+ if (ret < 0)
+ return ret;
+
+ ret = typec_find_port_power_role(cap_str);
+ if (ret < 0)
+ return ret;
+ cap->type = ret;
+
+ /* USB data support is optional */
+ ret = fwnode_property_read_string(fwnode, "data-role", &cap_str);
+ if (ret == 0) {
+ ret = typec_find_port_data_role(cap_str);
+ if (ret < 0)
+ return ret;
+ cap->data = ret;
+ }
+
+ /* Get the preferred power role for a DRP */
+ if (cap->type == TYPEC_PORT_DRP) {
+ cap->prefer_role = TYPEC_NO_PREFERRED_ROLE;
+
+ ret = fwnode_property_read_string(fwnode, "try-power-role", &cap_str);
+ if (ret == 0) {
+ ret = typec_find_power_role(cap_str);
+ if (ret < 0)
+ return ret;
+ cap->prefer_role = ret;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(typec_get_fw_cap);
+
/**
* typec_port_register_altmode - Register USB Type-C Port Alternate Mode
* @port: USB Type-C Port that supports the alternate mode
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 33aadc0a29ea..984a13a9efc2 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -5928,7 +5928,6 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
struct fwnode_handle *fwnode)
{
const char *opmode_str;
- const char *cap_str;
int ret;
u32 mw, frs_current;
@@ -5944,23 +5943,10 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
*/
fw_devlink_purge_absent_suppliers(fwnode);
- /* USB data support is optional */
- ret = fwnode_property_read_string(fwnode, "data-role", &cap_str);
- if (ret == 0) {
- ret = typec_find_port_data_role(cap_str);
- if (ret < 0)
- return ret;
- port->typec_caps.data = ret;
- }
-
- ret = fwnode_property_read_string(fwnode, "power-role", &cap_str);
+ ret = typec_get_fw_cap(&port->typec_caps, fwnode);
if (ret < 0)
return ret;
- ret = typec_find_port_power_role(cap_str);
- if (ret < 0)
- return ret;
- port->typec_caps.type = ret;
port->port_type = port->typec_caps.type;
port->pd_supported = !fwnode_property_read_bool(fwnode, "pd-disable");
@@ -5997,14 +5983,6 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
if (port->port_type == TYPEC_PORT_SRC)
return 0;
- /* Get the preferred power role for DRP */
- ret = fwnode_property_read_string(fwnode, "try-power-role", &cap_str);
- if (ret < 0)
- return ret;
-
- port->typec_caps.prefer_role = typec_find_power_role(cap_str);
- if (port->typec_caps.prefer_role < 0)
- return -EINVAL;
sink:
port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h
index e2e44bb1dad8..c1e5910809ad 100644
--- a/include/linux/usb/typec.h
+++ b/include/linux/usb/typec.h
@@ -295,6 +295,9 @@ int typec_set_mode(struct typec_port *port, int mode);
void *typec_get_drvdata(struct typec_port *port);
+int typec_get_fw_cap(struct typec_capability *cap,
+ struct fwnode_handle *fwnode);
+
int typec_find_pwr_opmode(const char *name);
int typec_find_orientation(const char *name);
int typec_find_port_power_role(const char *name);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 454/731] extcon: usbc-tusb320: Factor out extcon into dedicated functions
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (452 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 453/731] usb: typec: Factor out non-PD fwnode properties Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 455/731] extcon: usbc-tusb320: Add USB TYPE-C support Greg Kroah-Hartman
` (287 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marek Vasut, Chanwoo Choi, Sasha Levin
From: Marek Vasut <marex@denx.de>
[ Upstream commit 9483811a126a319ecac749f1b767ea5faecc7aed ]
Move extcon code into separate functions in preparation for addition of
USB TYPE-C support. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stable-dep-of: 581c848b610d ("extcon: usbc-tusb320: Update state on probe even if no IRQ pending")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/extcon/extcon-usbc-tusb320.c | 75 +++++++++++++++++-----------
1 file changed, 46 insertions(+), 29 deletions(-)
diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
index 6ba3d89b106d..aced4bbb455d 100644
--- a/drivers/extcon/extcon-usbc-tusb320.c
+++ b/drivers/extcon/extcon-usbc-tusb320.c
@@ -184,19 +184,9 @@ static struct tusb320_ops tusb320l_ops = {
.get_revision = tusb320l_get_revision,
};
-static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
+static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg)
{
- struct tusb320_priv *priv = dev_id;
int state, polarity;
- unsigned reg;
-
- if (regmap_read(priv->regmap, TUSB320_REG9, ®)) {
- dev_err(priv->dev, "error during i2c read!\n");
- return IRQ_NONE;
- }
-
- if (!(reg & TUSB320_REG9_INTERRUPT_STATUS))
- return IRQ_NONE;
state = (reg >> TUSB320_REG9_ATTACHED_STATE_SHIFT) &
TUSB320_REG9_ATTACHED_STATE_MASK;
@@ -219,6 +209,22 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
extcon_sync(priv->edev, EXTCON_USB_HOST);
priv->state = state;
+}
+
+static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
+{
+ struct tusb320_priv *priv = dev_id;
+ unsigned int reg;
+
+ if (regmap_read(priv->regmap, TUSB320_REG9, ®)) {
+ dev_err(priv->dev, "error during i2c read!\n");
+ return IRQ_NONE;
+ }
+
+ if (!(reg & TUSB320_REG9_INTERRUPT_STATUS))
+ return IRQ_NONE;
+
+ tusb320_extcon_irq_handler(priv, reg);
regmap_write(priv->regmap, TUSB320_REG9, reg);
@@ -230,8 +236,32 @@ static const struct regmap_config tusb320_regmap_config = {
.val_bits = 8,
};
-static int tusb320_extcon_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int tusb320_extcon_probe(struct tusb320_priv *priv)
+{
+ int ret;
+
+ priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable);
+ if (IS_ERR(priv->edev)) {
+ dev_err(priv->dev, "failed to allocate extcon device\n");
+ return PTR_ERR(priv->edev);
+ }
+
+ ret = devm_extcon_dev_register(priv->dev, priv->edev);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to register extcon device\n");
+ return ret;
+ }
+
+ extcon_set_property_capability(priv->edev, EXTCON_USB,
+ EXTCON_PROP_USB_TYPEC_POLARITY);
+ extcon_set_property_capability(priv->edev, EXTCON_USB_HOST,
+ EXTCON_PROP_USB_TYPEC_POLARITY);
+
+ return 0;
+}
+
+static int tusb320_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
struct tusb320_priv *priv;
const void *match_data;
@@ -257,12 +287,6 @@ static int tusb320_extcon_probe(struct i2c_client *client,
priv->ops = (struct tusb320_ops*)match_data;
- priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable);
- if (IS_ERR(priv->edev)) {
- dev_err(priv->dev, "failed to allocate extcon device\n");
- return PTR_ERR(priv->edev);
- }
-
if (priv->ops->get_revision) {
ret = priv->ops->get_revision(priv, &revision);
if (ret)
@@ -272,16 +296,9 @@ static int tusb320_extcon_probe(struct i2c_client *client,
dev_info(priv->dev, "chip revision %d\n", revision);
}
- ret = devm_extcon_dev_register(priv->dev, priv->edev);
- if (ret < 0) {
- dev_err(priv->dev, "failed to register extcon device\n");
+ ret = tusb320_extcon_probe(priv);
+ if (ret)
return ret;
- }
-
- extcon_set_property_capability(priv->edev, EXTCON_USB,
- EXTCON_PROP_USB_TYPEC_POLARITY);
- extcon_set_property_capability(priv->edev, EXTCON_USB_HOST,
- EXTCON_PROP_USB_TYPEC_POLARITY);
/* update initial state */
tusb320_irq_handler(client->irq, priv);
@@ -313,7 +330,7 @@ static const struct of_device_id tusb320_extcon_dt_match[] = {
MODULE_DEVICE_TABLE(of, tusb320_extcon_dt_match);
static struct i2c_driver tusb320_extcon_driver = {
- .probe = tusb320_extcon_probe,
+ .probe = tusb320_probe,
.driver = {
.name = "extcon-tusb320",
.of_match_table = tusb320_extcon_dt_match,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 455/731] extcon: usbc-tusb320: Add USB TYPE-C support
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (453 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 454/731] extcon: usbc-tusb320: Factor out extcon into dedicated functions Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 456/731] extcon: usbc-tusb320: Update state on probe even if no IRQ pending Greg Kroah-Hartman
` (286 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marek Vasut, Heikki Krogerus,
Alvin Šipraga, Chanwoo Choi, Sasha Levin
From: Marek Vasut <marex@denx.de>
[ Upstream commit bf7571c00dca0a9c5af3f5125ef5a89a40b13cd5 ]
The TI TUSB320 seems like a better fit for USB TYPE-C subsystem,
which can expose details collected by the TUSB320 in a far more
precise way than extcon. Since there are existing users in the
kernel and in DT which depend on the extcon interface, keep it
for now.
Add TYPE-C interface and expose the supported supply current,
direction and connector polarity via the TYPE-C interface.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stable-dep-of: 581c848b610d ("extcon: usbc-tusb320: Update state on probe even if no IRQ pending")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/extcon/Kconfig | 2 +-
drivers/extcon/extcon-usbc-tusb320.c | 159 +++++++++++++++++++++++++++
2 files changed, 160 insertions(+), 1 deletion(-)
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index c69d40ae5619..7684b3afa630 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -180,7 +180,7 @@ config EXTCON_USBC_CROS_EC
config EXTCON_USBC_TUSB320
tristate "TI TUSB320 USB-C extcon support"
- depends on I2C
+ depends on I2C && TYPEC
select REGMAP_I2C
help
Say Y here to enable support for USB Type C cable detection extcon
diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
index aced4bbb455d..edb8c3f997c9 100644
--- a/drivers/extcon/extcon-usbc-tusb320.c
+++ b/drivers/extcon/extcon-usbc-tusb320.c
@@ -6,6 +6,7 @@
* Author: Michael Auchter <michael.auchter@ni.com>
*/
+#include <linux/bitfield.h>
#include <linux/extcon-provider.h>
#include <linux/i2c.h>
#include <linux/init.h>
@@ -13,6 +14,24 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regmap.h>
+#include <linux/usb/typec.h>
+
+#define TUSB320_REG8 0x8
+#define TUSB320_REG8_CURRENT_MODE_ADVERTISE GENMASK(7, 6)
+#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB 0x0
+#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A 0x1
+#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A 0x2
+#define TUSB320_REG8_CURRENT_MODE_DETECT GENMASK(5, 4)
+#define TUSB320_REG8_CURRENT_MODE_DETECT_DEF 0x0
+#define TUSB320_REG8_CURRENT_MODE_DETECT_MED 0x1
+#define TUSB320_REG8_CURRENT_MODE_DETECT_ACC 0x2
+#define TUSB320_REG8_CURRENT_MODE_DETECT_HI 0x3
+#define TUSB320_REG8_ACCESSORY_CONNECTED GENMASK(3, 2)
+#define TUSB320_REG8_ACCESSORY_CONNECTED_NONE 0x0
+#define TUSB320_REG8_ACCESSORY_CONNECTED_AUDIO 0x4
+#define TUSB320_REG8_ACCESSORY_CONNECTED_ACC 0x5
+#define TUSB320_REG8_ACCESSORY_CONNECTED_DEBUG 0x6
+#define TUSB320_REG8_ACTIVE_CABLE_DETECTION BIT(0)
#define TUSB320_REG9 0x9
#define TUSB320_REG9_ATTACHED_STATE_SHIFT 6
@@ -55,6 +74,10 @@ struct tusb320_priv {
struct extcon_dev *edev;
struct tusb320_ops *ops;
enum tusb320_attached_state state;
+ struct typec_port *port;
+ struct typec_capability cap;
+ enum typec_port_type port_type;
+ enum typec_pwr_opmode pwr_opmode;
};
static const char * const tusb_attached_states[] = {
@@ -184,6 +207,44 @@ static struct tusb320_ops tusb320l_ops = {
.get_revision = tusb320l_get_revision,
};
+static int tusb320_set_adv_pwr_mode(struct tusb320_priv *priv)
+{
+ u8 mode;
+
+ if (priv->pwr_opmode == TYPEC_PWR_MODE_USB)
+ mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB;
+ else if (priv->pwr_opmode == TYPEC_PWR_MODE_1_5A)
+ mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A;
+ else if (priv->pwr_opmode == TYPEC_PWR_MODE_3_0A)
+ mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A;
+ else /* No other mode is supported. */
+ return -EINVAL;
+
+ return regmap_write_bits(priv->regmap, TUSB320_REG8,
+ TUSB320_REG8_CURRENT_MODE_ADVERTISE,
+ FIELD_PREP(TUSB320_REG8_CURRENT_MODE_ADVERTISE,
+ mode));
+}
+
+static int tusb320_port_type_set(struct typec_port *port,
+ enum typec_port_type type)
+{
+ struct tusb320_priv *priv = typec_get_drvdata(port);
+
+ if (type == TYPEC_PORT_SRC)
+ return priv->ops->set_mode(priv, TUSB320_MODE_DFP);
+ else if (type == TYPEC_PORT_SNK)
+ return priv->ops->set_mode(priv, TUSB320_MODE_UFP);
+ else if (type == TYPEC_PORT_DRP)
+ return priv->ops->set_mode(priv, TUSB320_MODE_DRP);
+ else
+ return priv->ops->set_mode(priv, TUSB320_MODE_PORT);
+}
+
+static const struct typec_operations tusb320_typec_ops = {
+ .port_type_set = tusb320_port_type_set,
+};
+
static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg)
{
int state, polarity;
@@ -211,6 +272,47 @@ static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg)
priv->state = state;
}
+static void tusb320_typec_irq_handler(struct tusb320_priv *priv, u8 reg9)
+{
+ struct typec_port *port = priv->port;
+ struct device *dev = priv->dev;
+ u8 mode, role, state;
+ int ret, reg8;
+ bool ori;
+
+ ori = reg9 & TUSB320_REG9_CABLE_DIRECTION;
+ typec_set_orientation(port, ori ? TYPEC_ORIENTATION_REVERSE :
+ TYPEC_ORIENTATION_NORMAL);
+
+ state = (reg9 >> TUSB320_REG9_ATTACHED_STATE_SHIFT) &
+ TUSB320_REG9_ATTACHED_STATE_MASK;
+ if (state == TUSB320_ATTACHED_STATE_DFP)
+ role = TYPEC_SOURCE;
+ else
+ role = TYPEC_SINK;
+
+ typec_set_vconn_role(port, role);
+ typec_set_pwr_role(port, role);
+ typec_set_data_role(port, role == TYPEC_SOURCE ?
+ TYPEC_HOST : TYPEC_DEVICE);
+
+ ret = regmap_read(priv->regmap, TUSB320_REG8, ®8);
+ if (ret) {
+ dev_err(dev, "error during reg8 i2c read, ret=%d!\n", ret);
+ return;
+ }
+
+ mode = FIELD_GET(TUSB320_REG8_CURRENT_MODE_DETECT, reg8);
+ if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_DEF)
+ typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
+ else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_MED)
+ typec_set_pwr_opmode(port, TYPEC_PWR_MODE_1_5A);
+ else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_HI)
+ typec_set_pwr_opmode(port, TYPEC_PWR_MODE_3_0A);
+ else /* Charge through accessory */
+ typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
+}
+
static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
{
struct tusb320_priv *priv = dev_id;
@@ -225,6 +327,7 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
return IRQ_NONE;
tusb320_extcon_irq_handler(priv, reg);
+ tusb320_typec_irq_handler(priv, reg);
regmap_write(priv->regmap, TUSB320_REG9, reg);
@@ -260,6 +363,58 @@ static int tusb320_extcon_probe(struct tusb320_priv *priv)
return 0;
}
+static int tusb320_typec_probe(struct i2c_client *client,
+ struct tusb320_priv *priv)
+{
+ struct fwnode_handle *connector;
+ const char *cap_str;
+ int ret;
+
+ /* The Type-C connector is optional, for backward compatibility. */
+ connector = device_get_named_child_node(&client->dev, "connector");
+ if (!connector)
+ return 0;
+
+ /* Type-C connector found. */
+ ret = typec_get_fw_cap(&priv->cap, connector);
+ if (ret)
+ return ret;
+
+ priv->port_type = priv->cap.type;
+
+ /* This goes into register 0x8 field CURRENT_MODE_ADVERTISE */
+ ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str);
+ if (ret)
+ return ret;
+
+ ret = typec_find_pwr_opmode(cap_str);
+ if (ret < 0)
+ return ret;
+ if (ret == TYPEC_PWR_MODE_PD)
+ return -EINVAL;
+
+ priv->pwr_opmode = ret;
+
+ /* Initialize the hardware with the devicetree settings. */
+ ret = tusb320_set_adv_pwr_mode(priv);
+ if (ret)
+ return ret;
+
+ priv->cap.revision = USB_TYPEC_REV_1_1;
+ priv->cap.accessory[0] = TYPEC_ACCESSORY_AUDIO;
+ priv->cap.accessory[1] = TYPEC_ACCESSORY_DEBUG;
+ priv->cap.orientation_aware = true;
+ priv->cap.driver_data = priv;
+ priv->cap.ops = &tusb320_typec_ops;
+ priv->cap.fwnode = connector;
+
+ priv->port = typec_register_port(&client->dev, &priv->cap);
+ if (IS_ERR(priv->port))
+ return PTR_ERR(priv->port);
+
+ return 0;
+}
+
static int tusb320_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -300,6 +455,10 @@ static int tusb320_probe(struct i2c_client *client,
if (ret)
return ret;
+ ret = tusb320_typec_probe(client, priv);
+ if (ret)
+ return ret;
+
/* update initial state */
tusb320_irq_handler(client->irq, priv);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 456/731] extcon: usbc-tusb320: Update state on probe even if no IRQ pending
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (454 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 455/731] extcon: usbc-tusb320: Add USB TYPE-C support Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 15:45 ` Alvin Šipraga
2022-12-28 14:39 ` [PATCH 5.15 457/731] serial: amba-pl011: avoid SBSA UART accessing DMACR register Greg Kroah-Hartman
` (285 subsequent siblings)
741 siblings, 1 reply; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marek Vasut, Alvin Šipraga,
Heikki Krogerus, Sasha Levin
From: Marek Vasut <marex@denx.de>
[ Upstream commit 581c848b610dbf3fe1ed4d85fd53d0743c61faba ]
Currently this driver triggers extcon and typec state update in its
probe function, to read out current state reported by the chip and
report the correct state to upper layers. This synchronization is
performed correctly, but only in case the chip indicates a pending
interrupt in reg09 register.
This fails to cover the situation where all interrupts reported by
the chip were already handled by Linux before reboot, then the system
rebooted, and then Linux starts again. In this case, the TUSB320 no
longer reports any interrupts in reg09, and the state update does not
perform any update as it depends on that interrupt indication.
Fix this by turning tusb320_irq_handler() into a thin wrapper around
tusb320_state_update_handler(), where the later now contains the bulk
of the code of tusb320_irq_handler(), but adds new function parameter
"force_update". The "force_update" parameter can be used by the probe
function to assure that the state synchronization is always performed,
independent of the interrupt indicated in reg09. The interrupt handler
tusb320_irq_handler() callback uses force_update=false to avoid state
updates on potential spurious interrupts and retain current behavior.
Fixes: 06bc4ca115cdd ("extcon: Add driver for TI TUSB320")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221120141509.81012-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/extcon/extcon-usbc-tusb320.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
index edb8c3f997c9..b0f6e16ab0a9 100644
--- a/drivers/extcon/extcon-usbc-tusb320.c
+++ b/drivers/extcon/extcon-usbc-tusb320.c
@@ -313,9 +313,9 @@ static void tusb320_typec_irq_handler(struct tusb320_priv *priv, u8 reg9)
typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
}
-static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
+static irqreturn_t tusb320_state_update_handler(struct tusb320_priv *priv,
+ bool force_update)
{
- struct tusb320_priv *priv = dev_id;
unsigned int reg;
if (regmap_read(priv->regmap, TUSB320_REG9, ®)) {
@@ -323,7 +323,7 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
return IRQ_NONE;
}
- if (!(reg & TUSB320_REG9_INTERRUPT_STATUS))
+ if (!force_update && !(reg & TUSB320_REG9_INTERRUPT_STATUS))
return IRQ_NONE;
tusb320_extcon_irq_handler(priv, reg);
@@ -334,6 +334,13 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
+{
+ struct tusb320_priv *priv = dev_id;
+
+ return tusb320_state_update_handler(priv, false);
+}
+
static const struct regmap_config tusb320_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -460,7 +467,7 @@ static int tusb320_probe(struct i2c_client *client,
return ret;
/* update initial state */
- tusb320_irq_handler(client->irq, priv);
+ tusb320_state_update_handler(priv, true);
/* Reset chip to its default state */
ret = tusb320_reset(priv);
@@ -471,7 +478,7 @@ static int tusb320_probe(struct i2c_client *client,
* State and polarity might change after a reset, so update
* them again and make sure the interrupt status bit is cleared.
*/
- tusb320_irq_handler(client->irq, priv);
+ tusb320_state_update_handler(priv, true);
ret = devm_request_threaded_irq(priv->dev, client->irq, NULL,
tusb320_irq_handler,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 457/731] serial: amba-pl011: avoid SBSA UART accessing DMACR register
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (455 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 456/731] extcon: usbc-tusb320: Update state on probe even if no IRQ pending Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 458/731] serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle Greg Kroah-Hartman
` (284 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiamei Xie, Andre Przywara, Sasha Levin
From: Jiamei Xie <jiamei.xie@arm.com>
[ Upstream commit 94cdb9f33698478b0e7062586633c42c6158a786 ]
Chapter "B Generic UART" in "ARM Server Base System Architecture" [1]
documentation describes a generic UART interface. Such generic UART
does not support DMA. In current code, sbsa_uart_pops and
amba_pl011_pops share the same stop_rx operation, which will invoke
pl011_dma_rx_stop, leading to an access of the DMACR register. This
commit adds a using_rx_dma check in pl011_dma_rx_stop to avoid the
access to DMACR register for SBSA UARTs which does not support DMA.
When the kernel enables DMA engine with "CONFIG_DMA_ENGINE=y", Linux
SBSA PL011 driver will access PL011 DMACR register in some functions.
For most real SBSA Pl011 hardware implementations, the DMACR write
behaviour will be ignored. So these DMACR operations will not cause
obvious problems. But for some virtual SBSA PL011 hardware, like Xen
virtual SBSA PL011 (vpl011) device, the behaviour might be different.
Xen vpl011 emulation will inject a data abort to guest, when guest is
accessing an unimplemented UART register. As Xen VPL011 is SBSA
compatible, it will not implement DMACR register. So when Linux SBSA
PL011 driver access DMACR register, it will get an unhandled data abort
fault and the application will get a segmentation fault:
Unhandled fault at 0xffffffc00944d048
Mem abort info:
ESR = 0x96000000
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x00: ttbr address size fault
Data abort info:
ISV = 0, ISS = 0x00000000
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000020e2e000
[ffffffc00944d048] pgd=100000003ffff803, p4d=100000003ffff803, pud=100000003ffff803, pmd=100000003fffa803, pte=006800009c090f13
Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP
...
Call trace:
pl011_stop_rx+0x70/0x80
tty_port_shutdown+0x7c/0xb4
tty_port_close+0x60/0xcc
uart_close+0x34/0x8c
tty_release+0x144/0x4c0
__fput+0x78/0x220
____fput+0x1c/0x30
task_work_run+0x88/0xc0
do_notify_resume+0x8d0/0x123c
el0_svc+0xa8/0xc0
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x1a0/0x1a4
Code: b9000083 b901f001 794038a0 8b000042 (b9000041)
---[ end trace 83dd93df15c3216f ]---
note: bootlogd[132] exited with preempt_count 1
/etc/rcS.d/S07bootlogd: line 47: 132 Segmentation fault start-stop-daemon
This has been discussed in the Xen community, and we think it should fix
this in Linux. See [2] for more information.
[1] https://developer.arm.com/documentation/den0094/c/?lang=en
[2] https://lists.xenproject.org/archives/html/xen-devel/2022-11/msg00543.html
Fixes: 0dd1e247fd39 (drivers: PL011: add support for the ARM SBSA generic UART)
Signed-off-by: Jiamei Xie <jiamei.xie@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20221117103237.86856-1-jiamei.xie@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/amba-pl011.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 300a8bbb4b80..ca105e9baa42 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1050,6 +1050,9 @@ static void pl011_dma_rx_callback(void *data)
*/
static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
{
+ if (!uap->using_rx_dma)
+ return;
+
/* FIXME. Just disable the DMA enable */
uap->dmacr &= ~UART011_RXDMAE;
pl011_write(uap->dmacr, uap, REG_DMACR);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 458/731] serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (456 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 457/731] serial: amba-pl011: avoid SBSA UART accessing DMACR register Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 459/731] serial: stm32: move dma_request_chan() before clk_prepare_enable() Greg Kroah-Hartman
` (283 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, delisun, Ilpo Järvinen, Sasha Levin
From: delisun <delisun@pateo.com.cn>
[ Upstream commit 032d5a71ed378ffc6a2d41a187d8488a4f9fe415 ]
Clearing the RX FIFO will cause data loss.
Copy the pl011_enabl_interrupts implementation, and remove the clear
interrupt and FIFO part of the code.
Fixes: 211565b10099 ("serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle")
Signed-off-by: delisun <delisun@pateo.com.cn>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20221110020108.7700-1-delisun@pateo.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/amba-pl011.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index ca105e9baa42..7c8515f83f0a 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1836,8 +1836,17 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
static void pl011_unthrottle_rx(struct uart_port *port)
{
struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port);
+ unsigned long flags;
- pl011_enable_interrupts(uap);
+ spin_lock_irqsave(&uap->port.lock, flags);
+
+ uap->im = UART011_RTIM;
+ if (!pl011_dma_rx_running(uap))
+ uap->im |= UART011_RXIM;
+
+ pl011_write(uap->im, uap, REG_IMSC);
+
+ spin_unlock_irqrestore(&uap->port.lock, flags);
}
static int pl011_startup(struct uart_port *port)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 459/731] serial: stm32: move dma_request_chan() before clk_prepare_enable()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (457 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 458/731] serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 460/731] serial: pch: Fix PCI device refcount leak in pch_request_dma() Greg Kroah-Hartman
` (282 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Uwe Kleine-König,
Valentin Caron, Sasha Levin
From: Valentin Caron <valentin.caron@foss.st.com>
[ Upstream commit 0d114e9ff940ebad8e88267013bf96c605a6b336 ]
If dma_request_chan() returns a PROBE_DEFER error, clk_disable_unprepare()
will be called and USART clock will be disabled. But early console can be
still active on the same USART.
While moving dma_request_chan() before clk_prepare_enable(), the clock
won't be taken in case of a DMA PROBE_DEFER error, and so it doesn't need
to be disabled. Then USART is still clocked for early console.
Fixes: a7770a4bfcf4 ("serial: stm32: defer probe for dma devices")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20221118170602.1057863-1-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 47 ++++++++++++++++----------------
1 file changed, 23 insertions(+), 24 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index ce7ff7a0207f..5c60960e185d 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1363,22 +1363,10 @@ static int stm32_usart_serial_probe(struct platform_device *pdev)
if (!stm32port->info)
return -EINVAL;
- ret = stm32_usart_init_port(stm32port, pdev);
- if (ret)
- return ret;
-
- if (stm32port->wakeup_src) {
- device_set_wakeup_capable(&pdev->dev, true);
- ret = dev_pm_set_wake_irq(&pdev->dev, stm32port->port.irq);
- if (ret)
- goto err_deinit_port;
- }
-
stm32port->rx_ch = dma_request_chan(&pdev->dev, "rx");
- if (PTR_ERR(stm32port->rx_ch) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto err_wakeirq;
- }
+ if (PTR_ERR(stm32port->rx_ch) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
/* Fall back in interrupt mode for any non-deferral error */
if (IS_ERR(stm32port->rx_ch))
stm32port->rx_ch = NULL;
@@ -1392,6 +1380,17 @@ static int stm32_usart_serial_probe(struct platform_device *pdev)
if (IS_ERR(stm32port->tx_ch))
stm32port->tx_ch = NULL;
+ ret = stm32_usart_init_port(stm32port, pdev);
+ if (ret)
+ goto err_dma_tx;
+
+ if (stm32port->wakeup_src) {
+ device_set_wakeup_capable(&pdev->dev, true);
+ ret = dev_pm_set_wake_irq(&pdev->dev, stm32port->port.irq);
+ if (ret)
+ goto err_deinit_port;
+ }
+
if (stm32port->rx_ch && stm32_usart_of_dma_rx_probe(stm32port, pdev)) {
/* Fall back in interrupt mode */
dma_release_channel(stm32port->rx_ch);
@@ -1428,19 +1427,11 @@ static int stm32_usart_serial_probe(struct platform_device *pdev)
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
- if (stm32port->tx_ch) {
+ if (stm32port->tx_ch)
stm32_usart_of_dma_tx_remove(stm32port, pdev);
- dma_release_channel(stm32port->tx_ch);
- }
-
if (stm32port->rx_ch)
stm32_usart_of_dma_rx_remove(stm32port, pdev);
-err_dma_rx:
- if (stm32port->rx_ch)
- dma_release_channel(stm32port->rx_ch);
-
-err_wakeirq:
if (stm32port->wakeup_src)
dev_pm_clear_wake_irq(&pdev->dev);
@@ -1450,6 +1441,14 @@ static int stm32_usart_serial_probe(struct platform_device *pdev)
stm32_usart_deinit_port(stm32port);
+err_dma_tx:
+ if (stm32port->tx_ch)
+ dma_release_channel(stm32port->tx_ch);
+
+err_dma_rx:
+ if (stm32port->rx_ch)
+ dma_release_channel(stm32port->rx_ch);
+
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 460/731] serial: pch: Fix PCI device refcount leak in pch_request_dma()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (458 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 459/731] serial: stm32: move dma_request_chan() before clk_prepare_enable() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 461/731] tty: serial: clean up stop-tx part in altera_uart_tx_chars() Greg Kroah-Hartman
` (281 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang, Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit 8be3a7bf773700534a6e8f87f6ed2ed111254be5 ]
As comment of pci_get_slot() says, it returns a pci_device with its
refcount increased. The caller must decrement the reference count by
calling pci_dev_put().
Since 'dma_dev' is only used to filter the channel in filter(), we can
call pci_dev_put() before exiting from pch_request_dma(). Add the
missing pci_dev_put() for the normal and error path.
Fixes: 3c6a483275f4 ("Serial: EG20T: add PCH_UART driver")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221122114559.27692-1-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/pch_uart.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 1e65933f6cce..52cab2038da8 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -707,6 +707,7 @@ static void pch_request_dma(struct uart_port *port)
if (!chan) {
dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
__func__);
+ pci_dev_put(dma_dev);
return;
}
priv->chan_tx = chan;
@@ -723,6 +724,7 @@ static void pch_request_dma(struct uart_port *port)
__func__);
dma_release_channel(priv->chan_tx);
priv->chan_tx = NULL;
+ pci_dev_put(dma_dev);
return;
}
@@ -730,6 +732,8 @@ static void pch_request_dma(struct uart_port *port)
priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize,
&priv->rx_buf_dma, GFP_KERNEL);
priv->chan_rx = chan;
+
+ pci_dev_put(dma_dev);
}
static void pch_dma_rx_complete(void *arg)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 461/731] tty: serial: clean up stop-tx part in altera_uart_tx_chars()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (459 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 460/731] serial: pch: Fix PCI device refcount leak in pch_request_dma() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 462/731] tty: serial: altera_uart_{r,t}x_chars() need only uart_port Greg Kroah-Hartman
` (280 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tobias Klauser, Ilpo Järvinen,
Jiri Slaby, Sasha Levin
From: Jiri Slaby <jslaby@suse.cz>
[ Upstream commit d9c128117da41cf4cb0e80ae565b5d3ac79dffac ]
The "stop TX" path in altera_uart_tx_chars() is open-coded, so:
* use uart_circ_empty() to check if the buffer is empty, and
* when true, call altera_uart_stop_tx().
Cc: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220920052049.20507-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1307c5d33cce ("serial: altera_uart: fix locking in polling mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/altera_uart.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 7c5f4e966b59..0e194556d76e 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -272,10 +272,8 @@ static void altera_uart_tx_chars(struct altera_uart *pp)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (xmit->head == xmit->tail) {
- pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
- altera_uart_update_ctrl_reg(pp);
- }
+ if (uart_circ_empty(xmit))
+ altera_uart_stop_tx(port);
}
static irqreturn_t altera_uart_interrupt(int irq, void *data)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 462/731] tty: serial: altera_uart_{r,t}x_chars() need only uart_port
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (460 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 461/731] tty: serial: clean up stop-tx part in altera_uart_tx_chars() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 463/731] serial: altera_uart: fix locking in polling mode Greg Kroah-Hartman
` (279 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tobias Klauser, Ilpo Järvinen,
Jiri Slaby, Sasha Levin
From: Jiri Slaby <jslaby@suse.cz>
[ Upstream commit 3af44d9bb0539d5fa27d6159d696fda5f3747bff ]
Both altera_uart_{r,t}x_chars() need only uart_port, not altera_uart. So
pass the former from altera_uart_interrupt() directly.
Apart it maybe saves a dereference, this makes the transition of
altera_uart_tx_chars() easier to follow in the next patch.
Cc: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220920052049.20507-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1307c5d33cce ("serial: altera_uart: fix locking in polling mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/altera_uart.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 0e194556d76e..6e08fa11ceea 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -199,9 +199,8 @@ static void altera_uart_set_termios(struct uart_port *port,
*/
}
-static void altera_uart_rx_chars(struct altera_uart *pp)
+static void altera_uart_rx_chars(struct uart_port *port)
{
- struct uart_port *port = &pp->port;
unsigned char ch, flag;
unsigned short status;
@@ -246,9 +245,8 @@ static void altera_uart_rx_chars(struct altera_uart *pp)
tty_flip_buffer_push(&port->state->port);
}
-static void altera_uart_tx_chars(struct altera_uart *pp)
+static void altera_uart_tx_chars(struct uart_port *port)
{
- struct uart_port *port = &pp->port;
struct circ_buf *xmit = &port->state->xmit;
if (port->x_char) {
@@ -286,9 +284,9 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
spin_lock(&port->lock);
if (isr & ALTERA_UART_STATUS_RRDY_MSK)
- altera_uart_rx_chars(pp);
+ altera_uart_rx_chars(port);
if (isr & ALTERA_UART_STATUS_TRDY_MSK)
- altera_uart_tx_chars(pp);
+ altera_uart_tx_chars(port);
spin_unlock(&port->lock);
return IRQ_RETVAL(isr);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 463/731] serial: altera_uart: fix locking in polling mode
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (461 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 462/731] tty: serial: altera_uart_{r,t}x_chars() need only uart_port Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 464/731] serial: sunsab: Fix error handling in sunsab_init() Greg Kroah-Hartman
` (278 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Gabriel Somlo, Sasha Levin
From: Gabriel Somlo <gsomlo@gmail.com>
[ Upstream commit 1307c5d33cce8a41dd77c2571e4df65a5b627feb ]
Since altera_uart_interrupt() may also be called from
a poll timer in "serving_softirq" context, use
spin_[lock_irqsave|unlock_irqrestore] variants, which
are appropriate for both softirq and hardware interrupt
contexts.
Fixes: 2f8b9c15cd88 ("altera_uart: Add support for polling mode (IRQ-less)")
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Link: https://lore.kernel.org/r/20221122200426.888349-1-gsomlo@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/altera_uart.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 6e08fa11ceea..91799c420e25 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -278,16 +278,17 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
{
struct uart_port *port = data;
struct altera_uart *pp = container_of(port, struct altera_uart, port);
+ unsigned long flags;
unsigned int isr;
isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr;
- spin_lock(&port->lock);
+ spin_lock_irqsave(&port->lock, flags);
if (isr & ALTERA_UART_STATUS_RRDY_MSK)
altera_uart_rx_chars(port);
if (isr & ALTERA_UART_STATUS_TRDY_MSK)
altera_uart_tx_chars(port);
- spin_unlock(&port->lock);
+ spin_unlock_irqrestore(&port->lock, flags);
return IRQ_RETVAL(isr);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 464/731] serial: sunsab: Fix error handling in sunsab_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (462 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 463/731] serial: altera_uart: fix locking in polling mode Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 465/731] test_firmware: fix memory leak in test_firmware_init() Greg Kroah-Hartman
` (277 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yuan Can, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 1a6ec673fb627c26e2267ca0a03849f91dbd9b40 ]
The sunsab_init() returns the platform_driver_register() directly without
checking its return value, if platform_driver_register() failed, the
allocated sunsab_ports is leaked.
Fix by free sunsab_ports and set it to NULL when platform_driver_register()
failed.
Fixes: c4d37215a824 ("[SERIAL] sunsab: Convert to of_driver framework.")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221123061212.52593-1-yuancan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/sunsab.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 92e572634009..ac7cb80e4d6b 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -1137,7 +1137,13 @@ static int __init sunsab_init(void)
}
}
- return platform_driver_register(&sab_driver);
+ err = platform_driver_register(&sab_driver);
+ if (err) {
+ kfree(sunsab_ports);
+ sunsab_ports = NULL;
+ }
+
+ return err;
}
static void __exit sunsab_exit(void)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 465/731] test_firmware: fix memory leak in test_firmware_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (463 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 464/731] serial: sunsab: Fix error handling in sunsab_init() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 466/731] misc: ocxl: fix possible name leak in ocxl_file_register_afu() Greg Kroah-Hartman
` (276 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhengchao Shao, Luis Chamberlain,
Sasha Levin
From: Zhengchao Shao <shaozhengchao@huawei.com>
[ Upstream commit 7610615e8cdb3f6f5bbd9d8e7a5d8a63e3cabf2e ]
When misc_register() failed in test_firmware_init(), the memory pointed
by test_fw_config->name is not released. The memory leak information is
as follows:
unreferenced object 0xffff88810a34cb00 (size 32):
comm "insmod", pid 7952, jiffies 4294948236 (age 49.060s)
hex dump (first 32 bytes):
74 65 73 74 2d 66 69 72 6d 77 61 72 65 2e 62 69 test-firmware.bi
6e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 n...............
backtrace:
[<ffffffff81b21fcb>] __kmalloc_node_track_caller+0x4b/0xc0
[<ffffffff81affb96>] kstrndup+0x46/0xc0
[<ffffffffa0403a49>] __test_firmware_config_init+0x29/0x380 [test_firmware]
[<ffffffffa040f068>] 0xffffffffa040f068
[<ffffffff81002c41>] do_one_initcall+0x141/0x780
[<ffffffff816a72c3>] do_init_module+0x1c3/0x630
[<ffffffff816adb9e>] load_module+0x623e/0x76a0
[<ffffffff816af471>] __do_sys_finit_module+0x181/0x240
[<ffffffff89978f99>] do_syscall_64+0x39/0xb0
[<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: c92316bf8e94 ("test_firmware: add batched firmware tests")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20221119035721.18268-1-shaozhengchao@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/test_firmware.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/lib/test_firmware.c b/lib/test_firmware.c
index 1bccd6cd5f48..e68be7aba7d1 100644
--- a/lib/test_firmware.c
+++ b/lib/test_firmware.c
@@ -1111,6 +1111,7 @@ static int __init test_firmware_init(void)
rc = misc_register(&test_fw_misc_device);
if (rc) {
+ __test_firmware_config_free();
kfree(test_fw_config);
pr_err("could not register misc device: %d\n", rc);
return rc;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 466/731] misc: ocxl: fix possible name leak in ocxl_file_register_afu()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (464 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 465/731] test_firmware: fix memory leak in test_firmware_init() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 467/731] ocxl: fix pci device refcount leak when calling get_function_0() Greg Kroah-Hartman
` (275 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Andrew Donnellan,
Frederic Barrat, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit a4cb1004aeed2ab893a058fad00a5b41a12c4691 ]
If device_register() returns error in ocxl_file_register_afu(),
the name allocated by dev_set_name() need be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup(),
and info is freed in info_release().
Fixes: 75ca758adbaf ("ocxl: Create a clear delineation between ocxl backend & frontend")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111145929.2429271-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/ocxl/file.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/ocxl/file.c b/drivers/misc/ocxl/file.c
index 134806c2e67e..a199c7ce3f81 100644
--- a/drivers/misc/ocxl/file.c
+++ b/drivers/misc/ocxl/file.c
@@ -543,8 +543,11 @@ int ocxl_file_register_afu(struct ocxl_afu *afu)
goto err_put;
rc = device_register(&info->dev);
- if (rc)
- goto err_put;
+ if (rc) {
+ free_minor(info);
+ put_device(&info->dev);
+ return rc;
+ }
rc = ocxl_sysfs_register_afu(info);
if (rc)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 467/731] ocxl: fix pci device refcount leak when calling get_function_0()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (465 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 466/731] misc: ocxl: fix possible name leak in ocxl_file_register_afu() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 468/731] misc: tifm: fix possible memory leak in tifm_7xx1_switch_media() Greg Kroah-Hartman
` (274 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrew Donnellan, Yang Yingliang,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 27158c72678b39ee01cc01de1aba6b51c71abe2f ]
get_function_0() calls pci_get_domain_bus_and_slot(), as comment
says, it returns a pci device with refcount increment, so after
using it, pci_dev_put() needs be called.
Get the device reference when get_function_0() is not called, so
pci_dev_put() can be called in the error path and callers
unconditionally. And add comment above get_dvsec_vendor0() to tell
callers to call pci_dev_put().
Fixes: 87db7579ebd5 ("ocxl: control via sysfs whether the FPGA is reloaded on a link reset")
Suggested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20221121154339.4088935-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/ocxl/config.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/ocxl/config.c b/drivers/misc/ocxl/config.c
index a68738f38252..f1f669efe050 100644
--- a/drivers/misc/ocxl/config.c
+++ b/drivers/misc/ocxl/config.c
@@ -204,6 +204,18 @@ static int read_dvsec_vendor(struct pci_dev *dev)
return 0;
}
+/**
+ * get_dvsec_vendor0() - Find a related PCI device (function 0)
+ * @dev: PCI device to match
+ * @dev0: The PCI device (function 0) found
+ * @out_pos: The position of PCI device (function 0)
+ *
+ * Returns 0 on success, negative on failure.
+ *
+ * NOTE: If it's successful, the reference of dev0 is increased,
+ * so after using it, the callers must call pci_dev_put() to give
+ * up the reference.
+ */
static int get_dvsec_vendor0(struct pci_dev *dev, struct pci_dev **dev0,
int *out_pos)
{
@@ -213,10 +225,14 @@ static int get_dvsec_vendor0(struct pci_dev *dev, struct pci_dev **dev0,
dev = get_function_0(dev);
if (!dev)
return -1;
+ } else {
+ dev = pci_dev_get(dev);
}
pos = find_dvsec(dev, OCXL_DVSEC_VENDOR_ID);
- if (!pos)
+ if (!pos) {
+ pci_dev_put(dev);
return -1;
+ }
*dev0 = dev;
*out_pos = pos;
return 0;
@@ -233,6 +249,7 @@ int ocxl_config_get_reset_reload(struct pci_dev *dev, int *val)
pci_read_config_dword(dev0, pos + OCXL_DVSEC_VENDOR_RESET_RELOAD,
&reset_reload);
+ pci_dev_put(dev0);
*val = !!(reset_reload & BIT(0));
return 0;
}
@@ -254,6 +271,7 @@ int ocxl_config_set_reset_reload(struct pci_dev *dev, int val)
reset_reload &= ~BIT(0);
pci_write_config_dword(dev0, pos + OCXL_DVSEC_VENDOR_RESET_RELOAD,
reset_reload);
+ pci_dev_put(dev0);
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 468/731] misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (466 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 467/731] ocxl: fix pci device refcount leak when calling get_function_0() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 469/731] misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os Greg Kroah-Hartman
` (273 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, ruanjinjie, Sasha Levin
From: ruanjinjie <ruanjinjie@huawei.com>
[ Upstream commit fd2c930cf6a5b9176382c15f9acb1996e76e25ad ]
If device_register() returns error in tifm_7xx1_switch_media(),
name of kobject which is allocated in dev_set_name() called in device_add()
is leaked.
Never directly free @dev after calling device_register(), even
if it returned an error! Always use put_device() to give up the
reference initialized.
Fixes: 2428a8fe2261 ("tifm: move common device management tasks from tifm_7xx1 to tifm_core")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20221117064725.3478402-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/tifm_7xx1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/misc/tifm_7xx1.c b/drivers/misc/tifm_7xx1.c
index 228f2eb1d476..2aebbfda104d 100644
--- a/drivers/misc/tifm_7xx1.c
+++ b/drivers/misc/tifm_7xx1.c
@@ -190,7 +190,7 @@ static void tifm_7xx1_switch_media(struct work_struct *work)
spin_unlock_irqrestore(&fm->lock, flags);
}
if (sock)
- tifm_free_device(&sock->dev);
+ put_device(&sock->dev);
}
spin_lock_irqsave(&fm->lock, flags);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 469/731] misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (467 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 468/731] misc: tifm: fix possible memory leak in tifm_7xx1_switch_media() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 470/731] firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe() Greg Kroah-Hartman
` (272 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zheng Wang, Dimitri Sivanich, Sasha Levin
From: Zheng Wang <zyytlz.wz@163.com>
[ Upstream commit 643a16a0eb1d6ac23744bb6e90a00fc21148a9dc ]
In some bad situation, the gts may be freed gru_check_chiplet_assignment.
The call chain can be gru_unload_context->gru_free_gru_context->gts_drop
and kfree finally. However, the caller didn't know if the gts is freed
or not and use it afterwards. This will trigger a Use after Free bug.
Fix it by introducing a return value to see if it's in error path or not.
Free the gts in caller if gru_check_chiplet_assignment check failed.
Fixes: 55484c45dbec ("gru: allow users to specify gru chiplet 2")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Acked-by: Dimitri Sivanich <sivanich@hpe.com>
Link: https://lore.kernel.org/r/20221110035033.19498-1-zyytlz.wz@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/sgi-gru/grufault.c | 13 +++++++++++--
drivers/misc/sgi-gru/grumain.c | 22 ++++++++++++++++++----
drivers/misc/sgi-gru/grutables.h | 2 +-
3 files changed, 30 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c
index d7ef61e602ed..b836936e9747 100644
--- a/drivers/misc/sgi-gru/grufault.c
+++ b/drivers/misc/sgi-gru/grufault.c
@@ -648,6 +648,7 @@ int gru_handle_user_call_os(unsigned long cb)
if ((cb & (GRU_HANDLE_STRIDE - 1)) || ucbnum >= GRU_NUM_CB)
return -EINVAL;
+again:
gts = gru_find_lock_gts(cb);
if (!gts)
return -EINVAL;
@@ -656,7 +657,11 @@ int gru_handle_user_call_os(unsigned long cb)
if (ucbnum >= gts->ts_cbr_au_count * GRU_CBR_AU_SIZE)
goto exit;
- gru_check_context_placement(gts);
+ if (gru_check_context_placement(gts)) {
+ gru_unlock_gts(gts);
+ gru_unload_context(gts, 1);
+ goto again;
+ }
/*
* CCH may contain stale data if ts_force_cch_reload is set.
@@ -874,7 +879,11 @@ int gru_set_context_option(unsigned long arg)
} else {
gts->ts_user_blade_id = req.val1;
gts->ts_user_chiplet_id = req.val0;
- gru_check_context_placement(gts);
+ if (gru_check_context_placement(gts)) {
+ gru_unlock_gts(gts);
+ gru_unload_context(gts, 1);
+ return ret;
+ }
}
break;
case sco_gseg_owner:
diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c
index 9afda47efbf2..3a16eb8e03f7 100644
--- a/drivers/misc/sgi-gru/grumain.c
+++ b/drivers/misc/sgi-gru/grumain.c
@@ -716,9 +716,10 @@ static int gru_check_chiplet_assignment(struct gru_state *gru,
* chiplet. Misassignment can occur if the process migrates to a different
* blade or if the user changes the selected blade/chiplet.
*/
-void gru_check_context_placement(struct gru_thread_state *gts)
+int gru_check_context_placement(struct gru_thread_state *gts)
{
struct gru_state *gru;
+ int ret = 0;
/*
* If the current task is the context owner, verify that the
@@ -726,15 +727,23 @@ void gru_check_context_placement(struct gru_thread_state *gts)
* references. Pthread apps use non-owner references to the CBRs.
*/
gru = gts->ts_gru;
+ /*
+ * If gru or gts->ts_tgid_owner isn't initialized properly, return
+ * success to indicate that the caller does not need to unload the
+ * gru context.The caller is responsible for their inspection and
+ * reinitialization if needed.
+ */
if (!gru || gts->ts_tgid_owner != current->tgid)
- return;
+ return ret;
if (!gru_check_chiplet_assignment(gru, gts)) {
STAT(check_context_unload);
- gru_unload_context(gts, 1);
+ ret = -EINVAL;
} else if (gru_retarget_intr(gts)) {
STAT(check_context_retarget_intr);
}
+
+ return ret;
}
@@ -934,7 +943,12 @@ vm_fault_t gru_fault(struct vm_fault *vmf)
mutex_lock(>s->ts_ctxlock);
preempt_disable();
- gru_check_context_placement(gts);
+ if (gru_check_context_placement(gts)) {
+ preempt_enable();
+ mutex_unlock(>s->ts_ctxlock);
+ gru_unload_context(gts, 1);
+ return VM_FAULT_NOPAGE;
+ }
if (!gts->ts_gru) {
STAT(load_user_context);
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index e4c067c61251..5c9783150cdf 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -638,7 +638,7 @@ extern int gru_user_flush_tlb(unsigned long arg);
extern int gru_user_unload_context(unsigned long arg);
extern int gru_get_exception_detail(unsigned long arg);
extern int gru_set_context_option(unsigned long address);
-extern void gru_check_context_placement(struct gru_thread_state *gts);
+extern int gru_check_context_placement(struct gru_thread_state *gts);
extern int gru_cpu_fault_map_id(void);
extern struct vm_area_struct *gru_find_vma(unsigned long vaddr);
extern void gru_flush_all_tlb(struct gru_state *gru);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 470/731] firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (468 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 469/731] misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 471/731] cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter() Greg Kroah-Hartman
` (271 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Joel Savitz, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 7b51161696e803fd5f9ad55b20a64c2df313f95c ]
In rpi_firmware_probe(), if mbox_request_channel() fails, the 'fw' will
not be freed through rpi_firmware_delete(), fix this leak by calling
kfree() in the error path.
Fixes: 1e7c57355a3b ("firmware: raspberrypi: Keep count of all consumers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221117070636.3849773-1-yangyingliang@huawei.com
Acked-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/raspberrypi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
index 4b8978b254f9..dba315f675bc 100644
--- a/drivers/firmware/raspberrypi.c
+++ b/drivers/firmware/raspberrypi.c
@@ -272,6 +272,7 @@ static int rpi_firmware_probe(struct platform_device *pdev)
int ret = PTR_ERR(fw->chan);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get mbox channel: %d\n", ret);
+ kfree(fw);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 471/731] cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (469 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 470/731] firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 472/731] cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter() Greg Kroah-Hartman
` (270 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Andrew Donnellan,
Frederic Barrat, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 61c80d1c3833e196256fb060382db94f24d3d9a7 ]
If device_register() fails in cxl_register_afu|adapter(), the device
is not added, device_unregister() can not be called in the error path,
otherwise it will cause a null-ptr-deref because of removing not added
device.
As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails.
Fixes: 14baf4d9c739 ("cxl: Add guest-specific code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111145440.2426970-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/cxl/guest.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
diff --git a/drivers/misc/cxl/guest.c b/drivers/misc/cxl/guest.c
index 186308f1f8eb..6334376826a9 100644
--- a/drivers/misc/cxl/guest.c
+++ b/drivers/misc/cxl/guest.c
@@ -959,10 +959,10 @@ int cxl_guest_init_afu(struct cxl *adapter, int slice, struct device_node *afu_n
* if it returns an error!
*/
if ((rc = cxl_register_afu(afu)))
- goto err_put1;
+ goto err_put_dev;
if ((rc = cxl_sysfs_afu_add(afu)))
- goto err_put1;
+ goto err_del_dev;
/*
* pHyp doesn't expose the programming models supported by the
@@ -978,7 +978,7 @@ int cxl_guest_init_afu(struct cxl *adapter, int slice, struct device_node *afu_n
afu->modes_supported = CXL_MODE_DIRECTED;
if ((rc = cxl_afu_select_best_mode(afu)))
- goto err_put2;
+ goto err_remove_sysfs;
adapter->afu[afu->slice] = afu;
@@ -998,10 +998,12 @@ int cxl_guest_init_afu(struct cxl *adapter, int slice, struct device_node *afu_n
return 0;
-err_put2:
+err_remove_sysfs:
cxl_sysfs_afu_remove(afu);
-err_put1:
- device_unregister(&afu->dev);
+err_del_dev:
+ device_del(&afu->dev);
+err_put_dev:
+ put_device(&afu->dev);
free = false;
guest_release_serr_irq(afu);
err2:
@@ -1135,18 +1137,20 @@ struct cxl *cxl_guest_init_adapter(struct device_node *np, struct platform_devic
* even if it returns an error!
*/
if ((rc = cxl_register_adapter(adapter)))
- goto err_put1;
+ goto err_put_dev;
if ((rc = cxl_sysfs_adapter_add(adapter)))
- goto err_put1;
+ goto err_del_dev;
/* release the context lock as the adapter is configured */
cxl_adapter_context_unlock(adapter);
return adapter;
-err_put1:
- device_unregister(&adapter->dev);
+err_del_dev:
+ device_del(&adapter->dev);
+err_put_dev:
+ put_device(&adapter->dev);
free = false;
cxl_guest_remove_chardev(adapter);
err1:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 472/731] cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (470 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 471/731] cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 473/731] iio: temperature: ltc2983: make bulk write buffer DMA-safe Greg Kroah-Hartman
` (269 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Frederic Barrat,
Andrew Donnellan, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 02cd3032b154fa02fdf90e7467abaeed889330b2 ]
If device_register() fails in cxl_pci_afu|adapter(), the device
is not added, device_unregister() can not be called in the error
path, otherwise it will cause a null-ptr-deref because of removing
not added device.
As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails.
Fixes: f204e0b8cedd ("cxl: Driver code for powernv PCIe based cards for userspace access")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111145440.2426970-2-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/cxl/pci.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 2ba899f5659f..0ac3f4cb88ac 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -1164,10 +1164,10 @@ static int pci_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
* if it returns an error!
*/
if ((rc = cxl_register_afu(afu)))
- goto err_put1;
+ goto err_put_dev;
if ((rc = cxl_sysfs_afu_add(afu)))
- goto err_put1;
+ goto err_del_dev;
adapter->afu[afu->slice] = afu;
@@ -1176,10 +1176,12 @@ static int pci_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
return 0;
-err_put1:
+err_del_dev:
+ device_del(&afu->dev);
+err_put_dev:
pci_deconfigure_afu(afu);
cxl_debugfs_afu_remove(afu);
- device_unregister(&afu->dev);
+ put_device(&afu->dev);
return rc;
err_free_native:
@@ -1667,23 +1669,25 @@ static struct cxl *cxl_pci_init_adapter(struct pci_dev *dev)
* even if it returns an error!
*/
if ((rc = cxl_register_adapter(adapter)))
- goto err_put1;
+ goto err_put_dev;
if ((rc = cxl_sysfs_adapter_add(adapter)))
- goto err_put1;
+ goto err_del_dev;
/* Release the context lock as adapter is configured */
cxl_adapter_context_unlock(adapter);
return adapter;
-err_put1:
+err_del_dev:
+ device_del(&adapter->dev);
+err_put_dev:
/* This should mirror cxl_remove_adapter, except without the
* sysfs parts
*/
cxl_debugfs_adapter_remove(adapter);
cxl_deconfigure_adapter(adapter);
- device_unregister(&adapter->dev);
+ put_device(&adapter->dev);
return ERR_PTR(rc);
err_release:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 473/731] iio: temperature: ltc2983: make bulk write buffer DMA-safe
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (471 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 472/731] cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 474/731] iio: adis: handle devices that cannot unmask the drdy pin Greg Kroah-Hartman
` (268 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Cosmin Tanislav, Jonathan Cameron,
Sasha Levin
From: Cosmin Tanislav <cosmin.tanislav@analog.com>
[ Upstream commit 5e0176213949724fbe9a8e4a39817edce337b8a0 ]
regmap_bulk_write() does not guarantee implicit DMA-safety,
even though the current implementation duplicates the given
buffer. Do not rely on it.
Fixes: f110f3188e56 ("iio: temperature: Add support for LTC2983")
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20221103130041.2153295-2-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/temperature/ltc2983.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
index 8306daa77908..b2ae2d2c7eef 100644
--- a/drivers/iio/temperature/ltc2983.c
+++ b/drivers/iio/temperature/ltc2983.c
@@ -205,6 +205,7 @@ struct ltc2983_data {
* Holds the converted temperature
*/
__be32 temp ____cacheline_aligned;
+ __be32 chan_val;
};
struct ltc2983_sensor {
@@ -309,19 +310,18 @@ static int __ltc2983_fault_handler(const struct ltc2983_data *st,
return 0;
}
-static int __ltc2983_chan_assign_common(const struct ltc2983_data *st,
+static int __ltc2983_chan_assign_common(struct ltc2983_data *st,
const struct ltc2983_sensor *sensor,
u32 chan_val)
{
u32 reg = LTC2983_CHAN_START_ADDR(sensor->chan);
- __be32 __chan_val;
chan_val |= LTC2983_CHAN_TYPE(sensor->type);
dev_dbg(&st->spi->dev, "Assign reg:0x%04X, val:0x%08X\n", reg,
chan_val);
- __chan_val = cpu_to_be32(chan_val);
- return regmap_bulk_write(st->regmap, reg, &__chan_val,
- sizeof(__chan_val));
+ st->chan_val = cpu_to_be32(chan_val);
+ return regmap_bulk_write(st->regmap, reg, &st->chan_val,
+ sizeof(st->chan_val));
}
static int __ltc2983_chan_custom_sensor_assign(struct ltc2983_data *st,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 474/731] iio: adis: handle devices that cannot unmask the drdy pin
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (472 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 473/731] iio: temperature: ltc2983: make bulk write buffer DMA-safe Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 475/731] iio: adis: stylistic changes Greg Kroah-Hartman
` (267 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nuno Sá, Jonathan Cameron, Sasha Levin
From: Nuno Sá <nuno.sa@analog.com>
[ Upstream commit 31fa357ac809affd9f9a7d0b5d1991951e16beec ]
Some devices can't mask/unmask the data ready pin and in those cases
each driver was just calling '{dis}enable_irq()' to control the trigger
state. This change, moves that handling into the library by introducing
a new boolean in the data structure that tells the library that the
device cannot unmask the pin.
On top of controlling the trigger state, we can also use this flag to
automatically request the IRQ with 'IRQF_NO_AUTOEN' in case it is set.
So far, all users of the library want to start operation with IRQs/DRDY
pin disabled so it should be fairly safe to do this inside the library.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210903141423.517028-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 99c05e4283a1 ("iio: adis: add '__adis_enable_irq()' implementation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/imu/adis.c | 15 ++++++++++++++-
drivers/iio/imu/adis_trigger.c | 4 ++++
include/linux/iio/imu/adis.h | 2 ++
3 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index d4e692b187cd..cb0d66bf6561 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -286,6 +286,13 @@ int adis_enable_irq(struct adis *adis, bool enable)
if (adis->data->enable_irq) {
ret = adis->data->enable_irq(adis, enable);
goto out_unlock;
+ } else if (adis->data->unmasked_drdy) {
+ if (enable)
+ enable_irq(adis->spi->irq);
+ else
+ disable_irq(adis->spi->irq);
+
+ goto out_unlock;
}
ret = __adis_read_reg_16(adis, adis->data->msc_ctrl_reg, &msc);
@@ -430,7 +437,13 @@ int __adis_initial_startup(struct adis *adis)
if (ret)
return ret;
- adis_enable_irq(adis, false);
+ /*
+ * don't bother calling this if we can't unmask the IRQ as in this case
+ * the IRQ is most likely not yet requested and we will request it
+ * with 'IRQF_NO_AUTOEN' anyways.
+ */
+ if (!adis->data->unmasked_drdy)
+ adis_enable_irq(adis, false);
if (!adis->data->prod_id_reg)
return 0;
diff --git a/drivers/iio/imu/adis_trigger.c b/drivers/iio/imu/adis_trigger.c
index 48eedc29b28a..c461bd1e8e69 100644
--- a/drivers/iio/imu/adis_trigger.c
+++ b/drivers/iio/imu/adis_trigger.c
@@ -30,6 +30,10 @@ static const struct iio_trigger_ops adis_trigger_ops = {
static int adis_validate_irq_flag(struct adis *adis)
{
unsigned long direction = adis->irq_flag & IRQF_TRIGGER_MASK;
+
+ /* We cannot mask the interrupt so ensure it's not enabled at request */
+ if (adis->data->unmasked_drdy)
+ adis->irq_flag |= IRQF_NO_AUTOEN;
/*
* Typically this devices have data ready either on the rising edge or
* on the falling edge of the data ready pin. This checks enforces that
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
index cf49997d5903..7c02f5292eea 100644
--- a/include/linux/iio/imu/adis.h
+++ b/include/linux/iio/imu/adis.h
@@ -49,6 +49,7 @@ struct adis_timeout {
* @status_error_mask: Bitmask of errors supported by the device
* @timeouts: Chip specific delays
* @enable_irq: Hook for ADIS devices that have a special IRQ enable/disable
+ * @unmasked_drdy: True for devices that cannot mask/unmask the data ready pin
* @has_paging: True if ADIS device has paged registers
* @burst_reg_cmd: Register command that triggers burst
* @burst_len: Burst size in the SPI RX buffer. If @burst_max_len is defined,
@@ -78,6 +79,7 @@ struct adis_data {
unsigned int status_error_mask;
int (*enable_irq)(struct adis *adis, bool enable);
+ bool unmasked_drdy;
bool has_paging;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 475/731] iio: adis: stylistic changes
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (473 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 474/731] iio: adis: handle devices that cannot unmask the drdy pin Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 476/731] iio:imu:adis: Move exports into IIO_ADISLIB namespace Greg Kroah-Hartman
` (266 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nuno Sá, Jonathan Cameron, Sasha Levin
From: Nuno Sá <nuno.sa@analog.com>
[ Upstream commit c39010ea6ba13bdf0003bd353e1d4c663aaac0a8 ]
Minor stylistic changes to address checkptach complains when called with
'--strict'.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220122130905.99-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 99c05e4283a1 ("iio: adis: add '__adis_enable_irq()' implementation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/imu/adis.c | 47 +++++++++++++++++----------------
drivers/iio/imu/adis_buffer.c | 6 ++---
drivers/iio/imu/adis_trigger.c | 3 +--
include/linux/iio/imu/adis.h | 48 ++++++++++++++++++----------------
4 files changed, 54 insertions(+), 50 deletions(-)
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index cb0d66bf6561..638957001653 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -30,8 +30,8 @@
* @value: The value to write to device (up to 4 bytes)
* @size: The size of the @value (in bytes)
*/
-int __adis_write_reg(struct adis *adis, unsigned int reg,
- unsigned int value, unsigned int size)
+int __adis_write_reg(struct adis *adis, unsigned int reg, unsigned int value,
+ unsigned int size)
{
unsigned int page = reg / ADIS_PAGE_SIZE;
int ret, i;
@@ -114,7 +114,7 @@ int __adis_write_reg(struct adis *adis, unsigned int reg,
ret = spi_sync(adis->spi, &msg);
if (ret) {
dev_err(&adis->spi->dev, "Failed to write register 0x%02X: %d\n",
- reg, ret);
+ reg, ret);
} else {
adis->current_page = page;
}
@@ -130,8 +130,8 @@ EXPORT_SYMBOL_GPL(__adis_write_reg);
* @val: The value read back from the device
* @size: The size of the @val buffer
*/
-int __adis_read_reg(struct adis *adis, unsigned int reg,
- unsigned int *val, unsigned int size)
+int __adis_read_reg(struct adis *adis, unsigned int reg, unsigned int *val,
+ unsigned int size)
{
unsigned int page = reg / ADIS_PAGE_SIZE;
struct spi_message msg;
@@ -201,12 +201,12 @@ int __adis_read_reg(struct adis *adis, unsigned int reg,
ret = spi_sync(adis->spi, &msg);
if (ret) {
dev_err(&adis->spi->dev, "Failed to read register 0x%02X: %d\n",
- reg, ret);
+ reg, ret);
return ret;
- } else {
- adis->current_page = page;
}
+ adis->current_page = page;
+
switch (size) {
case 4:
*val = get_unaligned_be32(adis->rx);
@@ -247,13 +247,13 @@ EXPORT_SYMBOL_GPL(__adis_update_bits_base);
#ifdef CONFIG_DEBUG_FS
-int adis_debugfs_reg_access(struct iio_dev *indio_dev,
- unsigned int reg, unsigned int writeval, unsigned int *readval)
+int adis_debugfs_reg_access(struct iio_dev *indio_dev, unsigned int reg,
+ unsigned int writeval, unsigned int *readval)
{
struct adis *adis = iio_device_get_drvdata(indio_dev);
if (readval) {
- uint16_t val16;
+ u16 val16;
int ret;
ret = adis_read_reg_16(adis, reg, &val16);
@@ -261,9 +261,9 @@ int adis_debugfs_reg_access(struct iio_dev *indio_dev,
*readval = val16;
return ret;
- } else {
- return adis_write_reg_16(adis, reg, writeval);
}
+
+ return adis_write_reg_16(adis, reg, writeval);
}
EXPORT_SYMBOL(adis_debugfs_reg_access);
@@ -279,14 +279,16 @@ EXPORT_SYMBOL(adis_debugfs_reg_access);
int adis_enable_irq(struct adis *adis, bool enable)
{
int ret = 0;
- uint16_t msc;
+ u16 msc;
mutex_lock(&adis->state_lock);
if (adis->data->enable_irq) {
ret = adis->data->enable_irq(adis, enable);
goto out_unlock;
- } else if (adis->data->unmasked_drdy) {
+ }
+
+ if (adis->data->unmasked_drdy) {
if (enable)
enable_irq(adis->spi->irq);
else
@@ -322,7 +324,7 @@ EXPORT_SYMBOL(adis_enable_irq);
*/
int __adis_check_status(struct adis *adis)
{
- uint16_t status;
+ u16 status;
int ret;
int i;
@@ -358,7 +360,7 @@ int __adis_reset(struct adis *adis)
const struct adis_timeout *timeouts = adis->data->timeouts;
ret = __adis_write_reg_8(adis, adis->data->glob_cmd_reg,
- ADIS_GLOB_CMD_SW_RESET);
+ ADIS_GLOB_CMD_SW_RESET);
if (ret) {
dev_err(&adis->spi->dev, "Failed to reset device: %d\n", ret);
return ret;
@@ -414,7 +416,7 @@ int __adis_initial_startup(struct adis *adis)
{
const struct adis_timeout *timeouts = adis->data->timeouts;
struct gpio_desc *gpio;
- uint16_t prod_id;
+ u16 prod_id;
int ret;
/* check if the device has rst pin low */
@@ -423,7 +425,7 @@ int __adis_initial_startup(struct adis *adis)
return PTR_ERR(gpio);
if (gpio) {
- msleep(10);
+ usleep_range(10, 12);
/* bring device out of reset */
gpiod_set_value_cansleep(gpio, 0);
msleep(timeouts->reset_ms);
@@ -477,7 +479,8 @@ EXPORT_SYMBOL_GPL(__adis_initial_startup);
* a error bit in the channels raw value set error_mask to 0.
*/
int adis_single_conversion(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan, unsigned int error_mask, int *val)
+ const struct iio_chan_spec *chan,
+ unsigned int error_mask, int *val)
{
struct adis *adis = iio_device_get_drvdata(indio_dev);
unsigned int uval;
@@ -486,7 +489,7 @@ int adis_single_conversion(struct iio_dev *indio_dev,
mutex_lock(&adis->state_lock);
ret = __adis_read_reg(adis, chan->address, &uval,
- chan->scan_type.storagebits / 8);
+ chan->scan_type.storagebits / 8);
if (ret)
goto err_unlock;
@@ -521,7 +524,7 @@ EXPORT_SYMBOL_GPL(adis_single_conversion);
* called.
*/
int adis_init(struct adis *adis, struct iio_dev *indio_dev,
- struct spi_device *spi, const struct adis_data *data)
+ struct spi_device *spi, const struct adis_data *data)
{
if (!data || !data->timeouts) {
dev_err(&spi->dev, "No config data or timeouts not defined!\n");
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
index 351c303c8a8c..d3527cf5ed37 100644
--- a/drivers/iio/imu/adis_buffer.c
+++ b/drivers/iio/imu/adis_buffer.c
@@ -20,7 +20,7 @@
#include <linux/iio/imu/adis.h>
static int adis_update_scan_mode_burst(struct iio_dev *indio_dev,
- const unsigned long *scan_mask)
+ const unsigned long *scan_mask)
{
struct adis *adis = iio_device_get_drvdata(indio_dev);
unsigned int burst_length, burst_max_length;
@@ -67,7 +67,7 @@ static int adis_update_scan_mode_burst(struct iio_dev *indio_dev,
}
int adis_update_scan_mode(struct iio_dev *indio_dev,
- const unsigned long *scan_mask)
+ const unsigned long *scan_mask)
{
struct adis *adis = iio_device_get_drvdata(indio_dev);
const struct iio_chan_spec *chan;
@@ -158,7 +158,7 @@ static irqreturn_t adis_trigger_handler(int irq, void *p)
}
iio_push_to_buffers_with_timestamp(indio_dev, adis->buffer,
- pf->timestamp);
+ pf->timestamp);
irq_done:
iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/iio/imu/adis_trigger.c b/drivers/iio/imu/adis_trigger.c
index c461bd1e8e69..0e7fb00ba241 100644
--- a/drivers/iio/imu/adis_trigger.c
+++ b/drivers/iio/imu/adis_trigger.c
@@ -15,8 +15,7 @@
#include <linux/iio/trigger.h>
#include <linux/iio/imu/adis.h>
-static int adis_data_rdy_trigger_set_state(struct iio_trigger *trig,
- bool state)
+static int adis_data_rdy_trigger_set_state(struct iio_trigger *trig, bool state)
{
struct adis *adis = iio_trigger_get_drvdata(trig);
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
index 7c02f5292eea..6193f9a6fbc2 100644
--- a/include/linux/iio/imu/adis.h
+++ b/include/linux/iio/imu/adis.h
@@ -32,6 +32,7 @@ struct adis_timeout {
u16 sw_reset_ms;
u16 self_test_ms;
};
+
/**
* struct adis_data - ADIS chip variant specific data
* @read_delay: SPI delay for read operations in us
@@ -45,7 +46,7 @@ struct adis_timeout {
* @self_test_mask: Bitmask of supported self-test operations
* @self_test_reg: Register address to request self test command
* @self_test_no_autoclear: True if device's self-test needs clear of ctrl reg
- * @status_error_msgs: Array of error messgaes
+ * @status_error_msgs: Array of error messages
* @status_error_mask: Bitmask of errors supported by the device
* @timeouts: Chip specific delays
* @enable_irq: Hook for ADIS devices that have a special IRQ enable/disable
@@ -130,12 +131,12 @@ struct adis {
unsigned long irq_flag;
void *buffer;
- uint8_t tx[10] ____cacheline_aligned;
- uint8_t rx[4];
+ u8 tx[10] ____cacheline_aligned;
+ u8 rx[4];
};
int adis_init(struct adis *adis, struct iio_dev *indio_dev,
- struct spi_device *spi, const struct adis_data *data);
+ struct spi_device *spi, const struct adis_data *data);
int __adis_reset(struct adis *adis);
/**
@@ -156,9 +157,9 @@ static inline int adis_reset(struct adis *adis)
}
int __adis_write_reg(struct adis *adis, unsigned int reg,
- unsigned int val, unsigned int size);
+ unsigned int val, unsigned int size);
int __adis_read_reg(struct adis *adis, unsigned int reg,
- unsigned int *val, unsigned int size);
+ unsigned int *val, unsigned int size);
/**
* __adis_write_reg_8() - Write single byte to a register (unlocked)
@@ -167,7 +168,7 @@ int __adis_read_reg(struct adis *adis, unsigned int reg,
* @value: The value to write
*/
static inline int __adis_write_reg_8(struct adis *adis, unsigned int reg,
- uint8_t val)
+ u8 val)
{
return __adis_write_reg(adis, reg, val, 1);
}
@@ -179,7 +180,7 @@ static inline int __adis_write_reg_8(struct adis *adis, unsigned int reg,
* @value: Value to be written
*/
static inline int __adis_write_reg_16(struct adis *adis, unsigned int reg,
- uint16_t val)
+ u16 val)
{
return __adis_write_reg(adis, reg, val, 2);
}
@@ -191,7 +192,7 @@ static inline int __adis_write_reg_16(struct adis *adis, unsigned int reg,
* @value: Value to be written
*/
static inline int __adis_write_reg_32(struct adis *adis, unsigned int reg,
- uint32_t val)
+ u32 val)
{
return __adis_write_reg(adis, reg, val, 4);
}
@@ -203,7 +204,7 @@ static inline int __adis_write_reg_32(struct adis *adis, unsigned int reg,
* @val: The value read back from the device
*/
static inline int __adis_read_reg_16(struct adis *adis, unsigned int reg,
- uint16_t *val)
+ u16 *val)
{
unsigned int tmp;
int ret;
@@ -222,7 +223,7 @@ static inline int __adis_read_reg_16(struct adis *adis, unsigned int reg,
* @val: The value read back from the device
*/
static inline int __adis_read_reg_32(struct adis *adis, unsigned int reg,
- uint32_t *val)
+ u32 *val)
{
unsigned int tmp;
int ret;
@@ -242,7 +243,7 @@ static inline int __adis_read_reg_32(struct adis *adis, unsigned int reg,
* @size: The size of the @value (in bytes)
*/
static inline int adis_write_reg(struct adis *adis, unsigned int reg,
- unsigned int val, unsigned int size)
+ unsigned int val, unsigned int size)
{
int ret;
@@ -261,7 +262,7 @@ static inline int adis_write_reg(struct adis *adis, unsigned int reg,
* @size: The size of the @val buffer
*/
static int adis_read_reg(struct adis *adis, unsigned int reg,
- unsigned int *val, unsigned int size)
+ unsigned int *val, unsigned int size)
{
int ret;
@@ -279,7 +280,7 @@ static int adis_read_reg(struct adis *adis, unsigned int reg,
* @value: The value to write
*/
static inline int adis_write_reg_8(struct adis *adis, unsigned int reg,
- uint8_t val)
+ u8 val)
{
return adis_write_reg(adis, reg, val, 1);
}
@@ -291,7 +292,7 @@ static inline int adis_write_reg_8(struct adis *adis, unsigned int reg,
* @value: Value to be written
*/
static inline int adis_write_reg_16(struct adis *adis, unsigned int reg,
- uint16_t val)
+ u16 val)
{
return adis_write_reg(adis, reg, val, 2);
}
@@ -303,7 +304,7 @@ static inline int adis_write_reg_16(struct adis *adis, unsigned int reg,
* @value: Value to be written
*/
static inline int adis_write_reg_32(struct adis *adis, unsigned int reg,
- uint32_t val)
+ u32 val)
{
return adis_write_reg(adis, reg, val, 4);
}
@@ -315,7 +316,7 @@ static inline int adis_write_reg_32(struct adis *adis, unsigned int reg,
* @val: The value read back from the device
*/
static inline int adis_read_reg_16(struct adis *adis, unsigned int reg,
- uint16_t *val)
+ u16 *val)
{
unsigned int tmp;
int ret;
@@ -334,7 +335,7 @@ static inline int adis_read_reg_16(struct adis *adis, unsigned int reg,
* @val: The value read back from the device
*/
static inline int adis_read_reg_32(struct adis *adis, unsigned int reg,
- uint32_t *val)
+ u32 *val)
{
unsigned int tmp;
int ret;
@@ -443,8 +444,8 @@ static inline void adis_dev_unlock(struct adis *adis)
}
int adis_single_conversion(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan, unsigned int error_mask,
- int *val);
+ const struct iio_chan_spec *chan,
+ unsigned int error_mask, int *val);
#define ADIS_VOLTAGE_CHAN(addr, si, chan, name, info_all, bits) { \
.type = IIO_VOLTAGE, \
@@ -493,7 +494,7 @@ int adis_single_conversion(struct iio_dev *indio_dev,
.modified = 1, \
.channel2 = IIO_MOD_ ## mod, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
- info_sep, \
+ (info_sep), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_all = info_all, \
.address = (addr), \
@@ -527,7 +528,7 @@ devm_adis_setup_buffer_and_trigger(struct adis *adis, struct iio_dev *indio_dev,
int devm_adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev);
int adis_update_scan_mode(struct iio_dev *indio_dev,
- const unsigned long *scan_mask);
+ const unsigned long *scan_mask);
#else /* CONFIG_IIO_BUFFER */
@@ -551,7 +552,8 @@ static inline int devm_adis_probe_trigger(struct adis *adis,
#ifdef CONFIG_DEBUG_FS
int adis_debugfs_reg_access(struct iio_dev *indio_dev,
- unsigned int reg, unsigned int writeval, unsigned int *readval);
+ unsigned int reg, unsigned int writeval,
+ unsigned int *readval);
#else
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 476/731] iio:imu:adis: Move exports into IIO_ADISLIB namespace
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (474 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 475/731] iio: adis: stylistic changes Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 477/731] iio: adis: add __adis_enable_irq() implementation Greg Kroah-Hartman
` (265 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jonathan Cameron,
Lars-Peter Clausen, Song Bao Hua (Barry Song),
Andy Shevchenko, Sasha Levin
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Upstream commit 6c9304d6af122f9afea41885ad82ed627e9442a8 ]
In order to avoid unneessary pollution of the global symbol namespace
move the common/library functions into a specific namespace and import
that into the various specific device drivers that use them.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Song Bao Hua (Barry Song) <song.bao.hua@hisilicon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220130205701.334592-9-jic23@kernel.org
Stable-dep-of: 99c05e4283a1 ("iio: adis: add '__adis_enable_irq()' implementation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/accel/adis16201.c | 1 +
drivers/iio/accel/adis16209.c | 1 +
drivers/iio/gyro/adis16136.c | 1 +
drivers/iio/gyro/adis16260.c | 1 +
drivers/iio/imu/adis.c | 20 ++++++++++----------
drivers/iio/imu/adis16400.c | 1 +
drivers/iio/imu/adis16460.c | 1 +
drivers/iio/imu/adis16475.c | 1 +
drivers/iio/imu/adis16480.c | 1 +
drivers/iio/imu/adis_buffer.c | 4 ++--
drivers/iio/imu/adis_trigger.c | 2 +-
drivers/staging/iio/accel/adis16203.c | 1 +
drivers/staging/iio/accel/adis16240.c | 1 +
13 files changed, 23 insertions(+), 13 deletions(-)
diff --git a/drivers/iio/accel/adis16201.c b/drivers/iio/accel/adis16201.c
index 7a434e2884d4..dfb8e2e5bdf5 100644
--- a/drivers/iio/accel/adis16201.c
+++ b/drivers/iio/accel/adis16201.c
@@ -300,3 +300,4 @@ MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:adis16201");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/accel/adis16209.c b/drivers/iio/accel/adis16209.c
index ac08e866d612..5a9c6e2296f1 100644
--- a/drivers/iio/accel/adis16209.c
+++ b/drivers/iio/accel/adis16209.c
@@ -310,3 +310,4 @@ MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:adis16209");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/gyro/adis16136.c b/drivers/iio/gyro/adis16136.c
index 36879f01e28c..71295709f2b9 100644
--- a/drivers/iio/gyro/adis16136.c
+++ b/drivers/iio/gyro/adis16136.c
@@ -591,3 +591,4 @@ module_spi_driver(adis16136_driver);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("Analog Devices ADIS16133/ADIS16135/ADIS16136 gyroscope driver");
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/gyro/adis16260.c b/drivers/iio/gyro/adis16260.c
index 66b6b7bd5e1b..eaf57bd339ed 100644
--- a/drivers/iio/gyro/adis16260.c
+++ b/drivers/iio/gyro/adis16260.c
@@ -433,3 +433,4 @@ module_spi_driver(adis16260_driver);
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16260/5 Digital Gyroscope Sensor");
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index 638957001653..f7fcfd04f659 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -121,7 +121,7 @@ int __adis_write_reg(struct adis *adis, unsigned int reg, unsigned int value,
return ret;
}
-EXPORT_SYMBOL_GPL(__adis_write_reg);
+EXPORT_SYMBOL_NS_GPL(__adis_write_reg, IIO_ADISLIB);
/**
* __adis_read_reg() - read N bytes from register (unlocked version)
@@ -218,7 +218,7 @@ int __adis_read_reg(struct adis *adis, unsigned int reg, unsigned int *val,
return ret;
}
-EXPORT_SYMBOL_GPL(__adis_read_reg);
+EXPORT_SYMBOL_NS_GPL(__adis_read_reg, IIO_ADISLIB);
/**
* __adis_update_bits_base() - ADIS Update bits function - Unlocked version
* @adis: The adis device
@@ -243,7 +243,7 @@ int __adis_update_bits_base(struct adis *adis, unsigned int reg, const u32 mask,
return __adis_write_reg(adis, reg, __val, size);
}
-EXPORT_SYMBOL_GPL(__adis_update_bits_base);
+EXPORT_SYMBOL_NS_GPL(__adis_update_bits_base, IIO_ADISLIB);
#ifdef CONFIG_DEBUG_FS
@@ -265,7 +265,7 @@ int adis_debugfs_reg_access(struct iio_dev *indio_dev, unsigned int reg,
return adis_write_reg_16(adis, reg, writeval);
}
-EXPORT_SYMBOL(adis_debugfs_reg_access);
+EXPORT_SYMBOL_NS(adis_debugfs_reg_access, IIO_ADISLIB);
#endif
@@ -314,7 +314,7 @@ int adis_enable_irq(struct adis *adis, bool enable)
mutex_unlock(&adis->state_lock);
return ret;
}
-EXPORT_SYMBOL(adis_enable_irq);
+EXPORT_SYMBOL_NS(adis_enable_irq, IIO_ADISLIB);
/**
* __adis_check_status() - Check the device for error conditions (unlocked)
@@ -346,7 +346,7 @@ int __adis_check_status(struct adis *adis)
return -EIO;
}
-EXPORT_SYMBOL_GPL(__adis_check_status);
+EXPORT_SYMBOL_NS_GPL(__adis_check_status, IIO_ADISLIB);
/**
* __adis_reset() - Reset the device (unlocked version)
@@ -370,7 +370,7 @@ int __adis_reset(struct adis *adis)
return 0;
}
-EXPORT_SYMBOL_GPL(__adis_reset);
+EXPORT_SYMBOL_NS_GPL(__adis_reset, IIO_ADIS_LIB);
static int adis_self_test(struct adis *adis)
{
@@ -461,7 +461,7 @@ int __adis_initial_startup(struct adis *adis)
return 0;
}
-EXPORT_SYMBOL_GPL(__adis_initial_startup);
+EXPORT_SYMBOL_NS_GPL(__adis_initial_startup, IIO_ADISLIB);
/**
* adis_single_conversion() - Performs a single sample conversion
@@ -509,7 +509,7 @@ int adis_single_conversion(struct iio_dev *indio_dev,
mutex_unlock(&adis->state_lock);
return ret;
}
-EXPORT_SYMBOL_GPL(adis_single_conversion);
+EXPORT_SYMBOL_NS_GPL(adis_single_conversion, IIO_ADISLIB);
/**
* adis_init() - Initialize adis device structure
@@ -546,7 +546,7 @@ int adis_init(struct adis *adis, struct iio_dev *indio_dev,
return 0;
}
-EXPORT_SYMBOL_GPL(adis_init);
+EXPORT_SYMBOL_NS_GPL(adis_init, IIO_ADISLIB);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
diff --git a/drivers/iio/imu/adis16400.c b/drivers/iio/imu/adis16400.c
index b12917a7cb60..9bcd9a9261b9 100644
--- a/drivers/iio/imu/adis16400.c
+++ b/drivers/iio/imu/adis16400.c
@@ -1230,3 +1230,4 @@ module_spi_driver(adis16400_driver);
MODULE_AUTHOR("Manuel Stahl <manuel.stahl@iis.fraunhofer.de>");
MODULE_DESCRIPTION("Analog Devices ADIS16400/5 IMU SPI driver");
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/imu/adis16460.c b/drivers/iio/imu/adis16460.c
index a6f9fba3e03f..40fc0e582a9f 100644
--- a/drivers/iio/imu/adis16460.c
+++ b/drivers/iio/imu/adis16460.c
@@ -444,3 +444,4 @@ module_spi_driver(adis16460_driver);
MODULE_AUTHOR("Dragos Bogdan <dragos.bogdan@analog.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16460 IMU driver");
MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c
index 287fff39a927..9d28534db3b0 100644
--- a/drivers/iio/imu/adis16475.c
+++ b/drivers/iio/imu/adis16475.c
@@ -1382,3 +1382,4 @@ module_spi_driver(adis16475_driver);
MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16475 IMU driver");
MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
index f9b4540db1f4..44bbe3d19907 100644
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -1538,3 +1538,4 @@ module_spi_driver(adis16480_driver);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("Analog Devices ADIS16480 IMU driver");
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
index d3527cf5ed37..928933027ae3 100644
--- a/drivers/iio/imu/adis_buffer.c
+++ b/drivers/iio/imu/adis_buffer.c
@@ -124,7 +124,7 @@ int adis_update_scan_mode(struct iio_dev *indio_dev,
return 0;
}
-EXPORT_SYMBOL_GPL(adis_update_scan_mode);
+EXPORT_SYMBOL_NS_GPL(adis_update_scan_mode, IIO_ADISLIB);
static irqreturn_t adis_trigger_handler(int irq, void *p)
{
@@ -212,5 +212,5 @@ devm_adis_setup_buffer_and_trigger(struct adis *adis, struct iio_dev *indio_dev,
return devm_add_action_or_reset(&adis->spi->dev, adis_buffer_cleanup,
adis);
}
-EXPORT_SYMBOL_GPL(devm_adis_setup_buffer_and_trigger);
+EXPORT_SYMBOL_NS_GPL(devm_adis_setup_buffer_and_trigger, IIO_ADISLIB);
diff --git a/drivers/iio/imu/adis_trigger.c b/drivers/iio/imu/adis_trigger.c
index 0e7fb00ba241..f890bf842db8 100644
--- a/drivers/iio/imu/adis_trigger.c
+++ b/drivers/iio/imu/adis_trigger.c
@@ -87,5 +87,5 @@ int devm_adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
return devm_iio_trigger_register(&adis->spi->dev, adis->trig);
}
-EXPORT_SYMBOL_GPL(devm_adis_probe_trigger);
+EXPORT_SYMBOL_NS_GPL(devm_adis_probe_trigger, IIO_ADISLIB);
diff --git a/drivers/staging/iio/accel/adis16203.c b/drivers/staging/iio/accel/adis16203.c
index 1d3026dae827..62d5397ff1f9 100644
--- a/drivers/staging/iio/accel/adis16203.c
+++ b/drivers/staging/iio/accel/adis16203.c
@@ -312,3 +312,4 @@ MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16203 Programmable 360 Degrees Inclinometer");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:adis16203");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/staging/iio/accel/adis16240.c b/drivers/staging/iio/accel/adis16240.c
index 2a8aa83b8d9e..bca857eef92e 100644
--- a/drivers/staging/iio/accel/adis16240.c
+++ b/drivers/staging/iio/accel/adis16240.c
@@ -440,3 +440,4 @@ MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices Programmable Impact Sensor and Recorder");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:adis16240");
+MODULE_IMPORT_NS(IIO_ADISLIB);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 477/731] iio: adis: add __adis_enable_irq() implementation
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (475 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 476/731] iio:imu:adis: Move exports into IIO_ADISLIB namespace Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 478/731] counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update Greg Kroah-Hartman
` (264 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ramona Bolboaca, Nuno Sá,
Jonathan Cameron, Sasha Levin
From: Ramona Bolboaca <ramona.bolboaca@analog.com>
[ Upstream commit 99c05e4283a19a02a256f14100ca4ec3b2da3f62 ]
Add '__adis_enable_irq()' implementation which is the unlocked
version of 'adis_enable_irq()'.
Call '__adis_enable_irq()' instead of 'adis_enable_irq()' from
'__adis_intial_startup()' to keep the expected unlocked functionality.
This fix is needed to remove a deadlock for all devices which are
using 'adis_initial_startup()'. The deadlock occurs because the
same mutex is acquired twice, without releasing it.
The mutex is acquired once inside 'adis_initial_startup()', before
calling '__adis_initial_startup()', and once inside
'adis_enable_irq()', which is called by '__adis_initial_startup()'.
The deadlock is removed by calling '__adis_enable_irq()', instead of
'adis_enable_irq()' from within '__adis_initial_startup()'.
Fixes: b600bd7eb3335 ("iio: adis: do not disabe IRQs in 'adis_init()'")
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221122082757.449452-2-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/imu/adis.c | 28 ++++++++++------------------
include/linux/iio/imu/adis.h | 13 ++++++++++++-
2 files changed, 22 insertions(+), 19 deletions(-)
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index f7fcfd04f659..bc40240b29e2 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -270,23 +270,19 @@ EXPORT_SYMBOL_NS(adis_debugfs_reg_access, IIO_ADISLIB);
#endif
/**
- * adis_enable_irq() - Enable or disable data ready IRQ
+ * __adis_enable_irq() - Enable or disable data ready IRQ (unlocked)
* @adis: The adis device
* @enable: Whether to enable the IRQ
*
* Returns 0 on success, negative error code otherwise
*/
-int adis_enable_irq(struct adis *adis, bool enable)
+int __adis_enable_irq(struct adis *adis, bool enable)
{
- int ret = 0;
+ int ret;
u16 msc;
- mutex_lock(&adis->state_lock);
-
- if (adis->data->enable_irq) {
- ret = adis->data->enable_irq(adis, enable);
- goto out_unlock;
- }
+ if (adis->data->enable_irq)
+ return adis->data->enable_irq(adis, enable);
if (adis->data->unmasked_drdy) {
if (enable)
@@ -294,12 +290,12 @@ int adis_enable_irq(struct adis *adis, bool enable)
else
disable_irq(adis->spi->irq);
- goto out_unlock;
+ return 0;
}
ret = __adis_read_reg_16(adis, adis->data->msc_ctrl_reg, &msc);
if (ret)
- goto out_unlock;
+ return ret;
msc |= ADIS_MSC_CTRL_DATA_RDY_POL_HIGH;
msc &= ~ADIS_MSC_CTRL_DATA_RDY_DIO2;
@@ -308,13 +304,9 @@ int adis_enable_irq(struct adis *adis, bool enable)
else
msc &= ~ADIS_MSC_CTRL_DATA_RDY_EN;
- ret = __adis_write_reg_16(adis, adis->data->msc_ctrl_reg, msc);
-
-out_unlock:
- mutex_unlock(&adis->state_lock);
- return ret;
+ return __adis_write_reg_16(adis, adis->data->msc_ctrl_reg, msc);
}
-EXPORT_SYMBOL_NS(adis_enable_irq, IIO_ADISLIB);
+EXPORT_SYMBOL_NS(__adis_enable_irq, IIO_ADISLIB);
/**
* __adis_check_status() - Check the device for error conditions (unlocked)
@@ -445,7 +437,7 @@ int __adis_initial_startup(struct adis *adis)
* with 'IRQF_NO_AUTOEN' anyways.
*/
if (!adis->data->unmasked_drdy)
- adis_enable_irq(adis, false);
+ __adis_enable_irq(adis, false);
if (!adis->data->prod_id_reg)
return 0;
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
index 6193f9a6fbc2..8210a9e68215 100644
--- a/include/linux/iio/imu/adis.h
+++ b/include/linux/iio/imu/adis.h
@@ -406,9 +406,20 @@ static inline int adis_update_bits_base(struct adis *adis, unsigned int reg,
__adis_update_bits_base(adis, reg, mask, val, 2)); \
})
-int adis_enable_irq(struct adis *adis, bool enable);
int __adis_check_status(struct adis *adis);
int __adis_initial_startup(struct adis *adis);
+int __adis_enable_irq(struct adis *adis, bool enable);
+
+static inline int adis_enable_irq(struct adis *adis, bool enable)
+{
+ int ret;
+
+ mutex_lock(&adis->state_lock);
+ ret = __adis_enable_irq(adis, enable);
+ mutex_unlock(&adis->state_lock);
+
+ return ret;
+}
static inline int adis_check_status(struct adis *adis)
{
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 478/731] counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (476 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 477/731] iio: adis: add __adis_enable_irq() implementation Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 479/731] coresight: trbe: remove cpuhp instance node before remove cpuhp state Greg Kroah-Hartman
` (263 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Fabrice Gasnier,
William Breathitt Gray, Sasha Levin
From: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
[ Upstream commit fd5ac974fc25feed084c2d1599d0dddb4e0556bc ]
The ARR (auto reload register) and CMP (compare) registers are
successively written. The status bits to check the update of these
registers are polled together with regmap_read_poll_timeout().
The condition to end the loop may become true, even if one of the register
isn't correctly updated.
So ensure both status bits are set before clearing them.
Fixes: d8958824cf07 ("iio: counter: Add support for STM32 LPTimer")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20221123133609.465614-1-fabrice.gasnier@foss.st.com/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/counter/stm32-lptimer-cnt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/counter/stm32-lptimer-cnt.c b/drivers/counter/stm32-lptimer-cnt.c
index 13656957c45f..fa7f86cf0ea3 100644
--- a/drivers/counter/stm32-lptimer-cnt.c
+++ b/drivers/counter/stm32-lptimer-cnt.c
@@ -69,7 +69,7 @@ static int stm32_lptim_set_enable_state(struct stm32_lptim_cnt *priv,
/* ensure CMP & ARR registers are properly written */
ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
- (val & STM32_LPTIM_CMPOK_ARROK),
+ (val & STM32_LPTIM_CMPOK_ARROK) == STM32_LPTIM_CMPOK_ARROK,
100, 1000);
if (ret)
return ret;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 479/731] coresight: trbe: remove cpuhp instance node before remove cpuhp state
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (477 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 478/731] counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 480/731] usb: roles: fix of node refcount leak in usb_role_switch_is_parent() Greg Kroah-Hartman
` (262 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Anshuman Khandual, Yang Shen,
Suzuki K Poulose, Sasha Levin
From: Yang Shen <shenyang39@huawei.com>
[ Upstream commit 20ee8c223f792947378196307d8e707c9cdc2d61 ]
cpuhp_state_add_instance() and cpuhp_state_remove_instance() should
be used in pairs. Or there will lead to the warn on
cpuhp_remove_multi_state() since the cpuhp_step list is not empty.
The following is the error log with 'rmmod coresight-trbe':
Error: Removing state 215 which has instances left.
Call trace:
__cpuhp_remove_state_cpuslocked+0x144/0x160
__cpuhp_remove_state+0xac/0x100
arm_trbe_device_remove+0x2c/0x60 [coresight_trbe]
platform_remove+0x34/0x70
device_remove+0x54/0x90
device_release_driver_internal+0x1e4/0x250
driver_detach+0x5c/0xb0
bus_remove_driver+0x64/0xc0
driver_unregister+0x3c/0x70
platform_driver_unregister+0x20/0x30
arm_trbe_exit+0x1c/0x658 [coresight_trbe]
__arm64_sys_delete_module+0x1ac/0x24c
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x58/0x1a0
do_el0_svc+0x38/0xd0
el0_svc+0x2c/0xc0
el0t_64_sync_handler+0x1ac/0x1b0
el0t_64_sync+0x19c/0x1a0
---[ end trace 0000000000000000 ]---
Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221122090355.23533-1-shenyang39@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwtracing/coresight/coresight-trbe.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/hwtracing/coresight/coresight-trbe.c b/drivers/hwtracing/coresight/coresight-trbe.c
index 7dddb85b9059..fac63d092c7b 100644
--- a/drivers/hwtracing/coresight/coresight-trbe.c
+++ b/drivers/hwtracing/coresight/coresight-trbe.c
@@ -1030,6 +1030,7 @@ static int arm_trbe_probe_cpuhp(struct trbe_drvdata *drvdata)
static void arm_trbe_remove_cpuhp(struct trbe_drvdata *drvdata)
{
+ cpuhp_state_remove_instance(drvdata->trbe_online, &drvdata->hotplug_node);
cpuhp_remove_multi_state(drvdata->trbe_online);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 480/731] usb: roles: fix of node refcount leak in usb_role_switch_is_parent()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (478 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 479/731] coresight: trbe: remove cpuhp instance node before remove cpuhp state Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 481/731] usb: gadget: f_hid: fix f_hidg lifetime vs cdev Greg Kroah-Hartman
` (261 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Heikki Krogerus, Yang Yingliang,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 1ab30c610630da5391a373cddb8a065bf4c4bc01 ]
I got the following report while doing device(mt6370-tcpc) load
test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /i2c/pmic@34
The 'parent' returned by fwnode_get_parent() with refcount incremented.
it needs be put after using.
Fixes: 6fadd72943b8 ("usb: roles: get usb-role-switch from parent")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221122111226.251588-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/roles/class.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
index dfaed7eee94f..32e6d19f7011 100644
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -106,10 +106,13 @@ usb_role_switch_is_parent(struct fwnode_handle *fwnode)
struct fwnode_handle *parent = fwnode_get_parent(fwnode);
struct device *dev;
- if (!parent || !fwnode_property_present(parent, "usb-role-switch"))
+ if (!fwnode_property_present(parent, "usb-role-switch")) {
+ fwnode_handle_put(parent);
return NULL;
+ }
dev = class_find_device_by_fwnode(role_class, parent);
+ fwnode_handle_put(parent);
return dev ? to_role_switch(dev) : ERR_PTR(-EPROBE_DEFER);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 481/731] usb: gadget: f_hid: fix f_hidg lifetime vs cdev
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (479 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 480/731] usb: roles: fix of node refcount leak in usb_role_switch_is_parent() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2023-01-05 12:18 ` Lee Jones
2022-12-28 14:39 ` [PATCH 5.15 482/731] usb: gadget: f_hid: fix refcount leak on error path Greg Kroah-Hartman
` (260 subsequent siblings)
741 siblings, 1 reply; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lee Jones, Andrzej Pietrasiewicz,
John Keeping, Sasha Levin
From: John Keeping <john@metanate.com>
[ Upstream commit 89ff3dfac604614287ad5aad9370c3f984ea3f4b ]
The embedded struct cdev does not have its lifetime correctly tied to
the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN
is held open while the gadget is deleted.
This can readily be replicated with libusbgx's example programs (for
conciseness - operating directly via configfs is equivalent):
gadget-hid
exec 3<> /dev/hidg0
gadget-vid-pid-remove
exec 3<&-
Pull the existing device up in to struct f_hidg and make use of the
cdev_device_{add,del}() helpers. This changes the lifetime of the
device object to match struct f_hidg, but note that it is still added
and deleted at the same time.
Fixes: 71adf1189469 ("USB: gadget: add HID gadget driver")
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20221122123523.3068034-2-john@metanate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/function/f_hid.c | 52 ++++++++++++++++-------------
1 file changed, 28 insertions(+), 24 deletions(-)
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index ca0a7d9eaa34..8b8bbeaa27cb 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -71,7 +71,7 @@ struct f_hidg {
wait_queue_head_t write_queue;
struct usb_request *req;
- int minor;
+ struct device dev;
struct cdev cdev;
struct usb_function func;
@@ -84,6 +84,14 @@ static inline struct f_hidg *func_to_hidg(struct usb_function *f)
return container_of(f, struct f_hidg, func);
}
+static void hidg_release(struct device *dev)
+{
+ struct f_hidg *hidg = container_of(dev, struct f_hidg, dev);
+
+ kfree(hidg->set_report_buf);
+ kfree(hidg);
+}
+
/*-------------------------------------------------------------------------*/
/* Static descriptors */
@@ -904,9 +912,7 @@ static int hidg_bind(struct usb_configuration *c, struct usb_function *f)
struct usb_ep *ep;
struct f_hidg *hidg = func_to_hidg(f);
struct usb_string *us;
- struct device *device;
int status;
- dev_t dev;
/* maybe allocate device-global string IDs, and patch descriptors */
us = usb_gstrings_attach(c->cdev, ct_func_strings,
@@ -999,21 +1005,11 @@ static int hidg_bind(struct usb_configuration *c, struct usb_function *f)
/* create char device */
cdev_init(&hidg->cdev, &f_hidg_fops);
- dev = MKDEV(major, hidg->minor);
- status = cdev_add(&hidg->cdev, dev, 1);
+ status = cdev_device_add(&hidg->cdev, &hidg->dev);
if (status)
goto fail_free_descs;
- device = device_create(hidg_class, NULL, dev, NULL,
- "%s%d", "hidg", hidg->minor);
- if (IS_ERR(device)) {
- status = PTR_ERR(device);
- goto del;
- }
-
return 0;
-del:
- cdev_del(&hidg->cdev);
fail_free_descs:
usb_free_all_descriptors(f);
fail:
@@ -1244,9 +1240,7 @@ static void hidg_free(struct usb_function *f)
hidg = func_to_hidg(f);
opts = container_of(f->fi, struct f_hid_opts, func_inst);
- kfree(hidg->report_desc);
- kfree(hidg->set_report_buf);
- kfree(hidg);
+ put_device(&hidg->dev);
mutex_lock(&opts->lock);
--opts->refcnt;
mutex_unlock(&opts->lock);
@@ -1256,8 +1250,7 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f)
{
struct f_hidg *hidg = func_to_hidg(f);
- device_destroy(hidg_class, MKDEV(major, hidg->minor));
- cdev_del(&hidg->cdev);
+ cdev_device_del(&hidg->cdev, &hidg->dev);
usb_free_all_descriptors(f);
}
@@ -1266,6 +1259,7 @@ static struct usb_function *hidg_alloc(struct usb_function_instance *fi)
{
struct f_hidg *hidg;
struct f_hid_opts *opts;
+ int ret;
/* allocate and initialize one new instance */
hidg = kzalloc(sizeof(*hidg), GFP_KERNEL);
@@ -1277,17 +1271,27 @@ static struct usb_function *hidg_alloc(struct usb_function_instance *fi)
mutex_lock(&opts->lock);
++opts->refcnt;
- hidg->minor = opts->minor;
+ device_initialize(&hidg->dev);
+ hidg->dev.release = hidg_release;
+ hidg->dev.class = hidg_class;
+ hidg->dev.devt = MKDEV(major, opts->minor);
+ ret = dev_set_name(&hidg->dev, "hidg%d", opts->minor);
+ if (ret) {
+ --opts->refcnt;
+ mutex_unlock(&opts->lock);
+ return ERR_PTR(ret);
+ }
+
hidg->bInterfaceSubClass = opts->subclass;
hidg->bInterfaceProtocol = opts->protocol;
hidg->report_length = opts->report_length;
hidg->report_desc_length = opts->report_desc_length;
if (opts->report_desc) {
- hidg->report_desc = kmemdup(opts->report_desc,
- opts->report_desc_length,
- GFP_KERNEL);
+ hidg->report_desc = devm_kmemdup(&hidg->dev, opts->report_desc,
+ opts->report_desc_length,
+ GFP_KERNEL);
if (!hidg->report_desc) {
- kfree(hidg);
+ put_device(&hidg->dev);
mutex_unlock(&opts->lock);
return ERR_PTR(-ENOMEM);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 482/731] usb: gadget: f_hid: fix refcount leak on error path
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (480 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 481/731] usb: gadget: f_hid: fix f_hidg lifetime vs cdev Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 483/731] drivers: mcb: fix resource leak in mcb_probe() Greg Kroah-Hartman
` (259 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lee Jones, Andrzej Pietrasiewicz,
John Keeping, Sasha Levin
From: John Keeping <john@metanate.com>
[ Upstream commit 70a3288a7586526315105c699b687d78cd32559a ]
When failing to allocate report_desc, opts->refcnt has already been
incremented so it needs to be decremented to avoid leaving the options
structure permanently locked.
Fixes: 21a9476a7ba8 ("usb: gadget: hid: add configfs support")
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20221122123523.3068034-3-john@metanate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/function/f_hid.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 8b8bbeaa27cb..6be6009f911e 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -1292,6 +1292,7 @@ static struct usb_function *hidg_alloc(struct usb_function_instance *fi)
GFP_KERNEL);
if (!hidg->report_desc) {
put_device(&hidg->dev);
+ --opts->refcnt;
mutex_unlock(&opts->lock);
return ERR_PTR(-ENOMEM);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 483/731] drivers: mcb: fix resource leak in mcb_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (481 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 482/731] usb: gadget: f_hid: fix refcount leak on error path Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 484/731] mcb: mcb-parse: fix error handing in chameleon_parse_gdd() Greg Kroah-Hartman
` (258 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhengchao Shao, Johannes Thumshirn,
Sasha Levin
From: Zhengchao Shao <shaozhengchao@huawei.com>
[ Upstream commit d7237462561fcd224fa687c56ccb68629f50fc0d ]
When probe hook function failed in mcb_probe(), it doesn't put the device.
Compiled test only.
Fixes: 7bc364097a89 ("mcb: Acquire reference to device in probe")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/9f87de36bfb85158b506cb78c6fc9db3f6a3bad1.1669624063.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mcb/mcb-core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mcb/mcb-core.c b/drivers/mcb/mcb-core.c
index cf128b3471d7..0530db548231 100644
--- a/drivers/mcb/mcb-core.c
+++ b/drivers/mcb/mcb-core.c
@@ -71,8 +71,10 @@ static int mcb_probe(struct device *dev)
get_device(dev);
ret = mdrv->probe(mdev, found_id);
- if (ret)
+ if (ret) {
module_put(carrier_mod);
+ put_device(dev);
+ }
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 484/731] mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (482 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 483/731] drivers: mcb: fix resource leak in mcb_probe() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 485/731] chardev: fix error handling in cdev_device_add() Greg Kroah-Hartman
` (257 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Johannes Thumshirn, Yang Yingliang,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 728ac3389296caf68638628c987aeae6c8851e2d ]
If mcb_device_register() returns error in chameleon_parse_gdd(), the refcount
of bus and device name are leaked. Fix this by calling put_device() to give up
the reference, so they can be released in mcb_release_dev() and kobject_cleanup().
Fixes: 3764e82e5150 ("drivers: Introduce MEN Chameleon Bus")
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/ebfb06e39b19272f0197fa9136b5e4b6f34ad732.1669624063.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mcb/mcb-parse.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mcb/mcb-parse.c b/drivers/mcb/mcb-parse.c
index 0266bfddfbe2..aa6938da0db8 100644
--- a/drivers/mcb/mcb-parse.c
+++ b/drivers/mcb/mcb-parse.c
@@ -108,7 +108,7 @@ static int chameleon_parse_gdd(struct mcb_bus *bus,
return 0;
err:
- mcb_free_dev(mdev);
+ put_device(&mdev->dev);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 485/731] chardev: fix error handling in cdev_device_add()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (483 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 484/731] mcb: mcb-parse: fix error handing in chameleon_parse_gdd() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 486/731] i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe Greg Kroah-Hartman
` (256 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 11fa7fefe3d8fac7da56bc9aa3dd5fb3081ca797 ]
While doing fault injection test, I got the following report:
------------[ cut here ]------------
kobject: '(null)' (0000000039956980): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 3 PID: 6306 at kobject_put+0x23d/0x4e0
CPU: 3 PID: 6306 Comm: 283 Tainted: G W 6.1.0-rc2-00005-g307c1086d7c9 #1253
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:kobject_put+0x23d/0x4e0
Call Trace:
<TASK>
cdev_device_add+0x15e/0x1b0
__iio_device_register+0x13b4/0x1af0 [industrialio]
__devm_iio_device_register+0x22/0x90 [industrialio]
max517_probe+0x3d8/0x6b4 [max517]
i2c_device_probe+0xa81/0xc00
When device_add() is injected fault and returns error, if dev->devt is not set,
cdev_add() is not called, cdev_del() is not needed. Fix this by checking dev->devt
in error path.
Fixes: 233ed09d7fda ("chardev: add helper function to register char devs with a struct device")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221202030237.520280-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/char_dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/char_dev.c b/fs/char_dev.c
index ba0ded7842a7..3f667292608c 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -547,7 +547,7 @@ int cdev_device_add(struct cdev *cdev, struct device *dev)
}
rc = device_add(dev);
- if (rc)
+ if (rc && dev->devt)
cdev_del(cdev);
return rc;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 486/731] i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (484 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 485/731] chardev: fix error handling in cdev_device_add() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 487/731] staging: rtl8192u: Fix use after free in ieee80211_rx() Greg Kroah-Hartman
` (255 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Hui Tang, Wolfram Sang, Sasha Levin
From: Hui Tang <tanghui20@huawei.com>
[ Upstream commit d78a167332e1ca8113268ed922c1212fd71b73ad ]
Using pcim_enable_device() to avoid missing pci_disable_device().
Fixes: 7e94dd154e93 ("i2c-pxa2xx: Add PCI support for PXA I2C controller")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-pxa-pci.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c
index f614cade432b..30e38bc8b6db 100644
--- a/drivers/i2c/busses/i2c-pxa-pci.c
+++ b/drivers/i2c/busses/i2c-pxa-pci.c
@@ -105,7 +105,7 @@ static int ce4100_i2c_probe(struct pci_dev *dev,
int i;
struct ce4100_devices *sds;
- ret = pci_enable_device_mem(dev);
+ ret = pcim_enable_device(dev);
if (ret)
return ret;
@@ -114,10 +114,8 @@ static int ce4100_i2c_probe(struct pci_dev *dev,
return -EINVAL;
}
sds = kzalloc(sizeof(*sds), GFP_KERNEL);
- if (!sds) {
- ret = -ENOMEM;
- goto err_mem;
- }
+ if (!sds)
+ return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) {
sds->pdev[i] = add_i2c_device(dev, i);
@@ -133,8 +131,6 @@ static int ce4100_i2c_probe(struct pci_dev *dev,
err_dev_add:
kfree(sds);
-err_mem:
- pci_disable_device(dev);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 487/731] staging: rtl8192u: Fix use after free in ieee80211_rx()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (485 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 486/731] i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 488/731] staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor() Greg Kroah-Hartman
` (254 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Dan Carpenter, Sasha Levin
From: Dan Carpenter <error27@gmail.com>
[ Upstream commit bcc5e2dcf09089b337b76fc1a589f6ff95ca19ac ]
We cannot dereference the "skb" pointer after calling
ieee80211_monitor_rx(), because it is a use after free.
Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y33BArx3k/aw6yv/@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index b58e75932ecd..3686b3c599ce 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -951,9 +951,11 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
#endif
if (ieee->iw_mode == IW_MODE_MONITOR) {
+ unsigned int len = skb->len;
+
ieee80211_monitor_rx(ieee, skb, rx_stats);
stats->rx_packets++;
- stats->rx_bytes += skb->len;
+ stats->rx_bytes += len;
return 1;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 488/731] staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (486 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 487/731] staging: rtl8192u: Fix use after free in ieee80211_rx() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 489/731] vme: Fix error not catched in fake_init() Greg Kroah-Hartman
` (253 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, YueHaibing, Sasha Levin
From: YueHaibing <yuehaibing@huawei.com>
[ Upstream commit d30f4436f364b4ad915ca2c09be07cd0f93ceb44 ]
The skb is delivered to netif_rx() in rtllib_monitor_rx(), which may free it,
after calling this, dereferencing skb may trigger use-after-free.
Found by Smatch.
Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221123081253.22296-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/rtl8192e/rtllib_rx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index e3d0a361d370..98e90670560b 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -1489,9 +1489,9 @@ static int rtllib_rx_Monitor(struct rtllib_device *ieee, struct sk_buff *skb,
hdrlen += 4;
}
- rtllib_monitor_rx(ieee, skb, rx_stats, hdrlen);
ieee->stats.rx_packets++;
ieee->stats.rx_bytes += skb->len;
+ rtllib_monitor_rx(ieee, skb, rx_stats, hdrlen);
return 1;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 489/731] vme: Fix error not catched in fake_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (487 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 488/731] staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 490/731] gpiolib: Get rid of redundant else Greg Kroah-Hartman
` (252 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Chen Zhongjin, Sasha Levin
From: Chen Zhongjin <chenzhongjin@huawei.com>
[ Upstream commit 7bef797d707f1744f71156b21d41e3b8c946631f ]
In fake_init(), __root_device_register() is possible to fail but it's
ignored, which can cause unregistering vme_root fail when exit.
general protection fault,
probably for non-canonical address 0xdffffc000000008c
KASAN: null-ptr-deref in range [0x0000000000000460-0x0000000000000467]
RIP: 0010:root_device_unregister+0x26/0x60
Call Trace:
<TASK>
__x64_sys_delete_module+0x34f/0x540
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Return error when __root_device_register() fails.
Fixes: 658bcdae9c67 ("vme: Adding Fake VME driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221205084805.147436-1-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/vme/bridges/vme_fake.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/vme/bridges/vme_fake.c b/drivers/vme/bridges/vme_fake.c
index 6a1bc284f297..eae78366eb02 100644
--- a/drivers/vme/bridges/vme_fake.c
+++ b/drivers/vme/bridges/vme_fake.c
@@ -1073,6 +1073,8 @@ static int __init fake_init(void)
/* We need a fake parent device */
vme_root = __root_device_register("vme", THIS_MODULE);
+ if (IS_ERR(vme_root))
+ return PTR_ERR(vme_root);
/* If we want to support more than one bridge at some point, we need to
* dynamically allocate this so we get one per device.
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 490/731] gpiolib: Get rid of redundant else
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (488 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 489/731] vme: Fix error not catched in fake_init() Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 491/731] gpiolib: cdev: fix NULL-pointer dereferences Greg Kroah-Hartman
` (251 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko,
Bartosz Golaszewski, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 1cef8b5019769d46725932eeace7a383bca97905 ]
In the snippets like the following
if (...)
return / goto / break / continue ...;
else
...
the 'else' is redundant. Get rid of it. In case of IOCTLs use
switch-case pattern that seems the usual in such cases.
While at it, clarify necessity of else in gpiod_direction_output()
by attaching else if to the closing curly brace on a previous line.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Stable-dep-of: 533aae7c94db ("gpiolib: cdev: fix NULL-pointer dereferences")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpiolib-cdev.c | 66 ++++++++++++++++++++-----------------
drivers/gpio/gpiolib.c | 12 +++----
2 files changed, 40 insertions(+), 38 deletions(-)
diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index 937e7a8dd8a9..a20396a6448b 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -197,16 +197,15 @@ static long linehandle_ioctl(struct file *file, unsigned int cmd,
void __user *ip = (void __user *)arg;
struct gpiohandle_data ghd;
DECLARE_BITMAP(vals, GPIOHANDLES_MAX);
- int i;
+ unsigned int i;
+ int ret;
- if (cmd == GPIOHANDLE_GET_LINE_VALUES_IOCTL) {
- /* NOTE: It's ok to read values of output lines. */
- int ret = gpiod_get_array_value_complex(false,
- true,
- lh->num_descs,
- lh->descs,
- NULL,
- vals);
+ switch (cmd) {
+ case GPIOHANDLE_GET_LINE_VALUES_IOCTL:
+ /* NOTE: It's okay to read values of output lines */
+ ret = gpiod_get_array_value_complex(false, true,
+ lh->num_descs, lh->descs,
+ NULL, vals);
if (ret)
return ret;
@@ -218,7 +217,7 @@ static long linehandle_ioctl(struct file *file, unsigned int cmd,
return -EFAULT;
return 0;
- } else if (cmd == GPIOHANDLE_SET_LINE_VALUES_IOCTL) {
+ case GPIOHANDLE_SET_LINE_VALUES_IOCTL:
/*
* All line descriptors were created at once with the same
* flags so just check if the first one is really output.
@@ -240,10 +239,11 @@ static long linehandle_ioctl(struct file *file, unsigned int cmd,
lh->descs,
NULL,
vals);
- } else if (cmd == GPIOHANDLE_SET_CONFIG_IOCTL) {
+ case GPIOHANDLE_SET_CONFIG_IOCTL:
return linehandle_set_config(lh, ip);
+ default:
+ return -EINVAL;
}
- return -EINVAL;
}
#ifdef CONFIG_COMPAT
@@ -1188,14 +1188,16 @@ static long linereq_ioctl(struct file *file, unsigned int cmd,
struct linereq *lr = file->private_data;
void __user *ip = (void __user *)arg;
- if (cmd == GPIO_V2_LINE_GET_VALUES_IOCTL)
+ switch (cmd) {
+ case GPIO_V2_LINE_GET_VALUES_IOCTL:
return linereq_get_values(lr, ip);
- else if (cmd == GPIO_V2_LINE_SET_VALUES_IOCTL)
+ case GPIO_V2_LINE_SET_VALUES_IOCTL:
return linereq_set_values(lr, ip);
- else if (cmd == GPIO_V2_LINE_SET_CONFIG_IOCTL)
+ case GPIO_V2_LINE_SET_CONFIG_IOCTL:
return linereq_set_config(lr, ip);
-
- return -EINVAL;
+ default:
+ return -EINVAL;
+ }
}
#ifdef CONFIG_COMPAT
@@ -2114,28 +2116,30 @@ static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
return -ENODEV;
/* Fill in the struct and pass to userspace */
- if (cmd == GPIO_GET_CHIPINFO_IOCTL) {
+ switch (cmd) {
+ case GPIO_GET_CHIPINFO_IOCTL:
return chipinfo_get(cdev, ip);
#ifdef CONFIG_GPIO_CDEV_V1
- } else if (cmd == GPIO_GET_LINEHANDLE_IOCTL) {
+ case GPIO_GET_LINEHANDLE_IOCTL:
return linehandle_create(gdev, ip);
- } else if (cmd == GPIO_GET_LINEEVENT_IOCTL) {
+ case GPIO_GET_LINEEVENT_IOCTL:
return lineevent_create(gdev, ip);
- } else if (cmd == GPIO_GET_LINEINFO_IOCTL ||
- cmd == GPIO_GET_LINEINFO_WATCH_IOCTL) {
- return lineinfo_get_v1(cdev, ip,
- cmd == GPIO_GET_LINEINFO_WATCH_IOCTL);
+ case GPIO_GET_LINEINFO_IOCTL:
+ return lineinfo_get_v1(cdev, ip, false);
+ case GPIO_GET_LINEINFO_WATCH_IOCTL:
+ return lineinfo_get_v1(cdev, ip, true);
#endif /* CONFIG_GPIO_CDEV_V1 */
- } else if (cmd == GPIO_V2_GET_LINEINFO_IOCTL ||
- cmd == GPIO_V2_GET_LINEINFO_WATCH_IOCTL) {
- return lineinfo_get(cdev, ip,
- cmd == GPIO_V2_GET_LINEINFO_WATCH_IOCTL);
- } else if (cmd == GPIO_V2_GET_LINE_IOCTL) {
+ case GPIO_V2_GET_LINEINFO_IOCTL:
+ return lineinfo_get(cdev, ip, false);
+ case GPIO_V2_GET_LINEINFO_WATCH_IOCTL:
+ return lineinfo_get(cdev, ip, true);
+ case GPIO_V2_GET_LINE_IOCTL:
return linereq_create(gdev, ip);
- } else if (cmd == GPIO_GET_LINEINFO_UNWATCH_IOCTL) {
+ case GPIO_GET_LINEINFO_UNWATCH_IOCTL:
return lineinfo_unwatch(cdev, ip);
+ default:
+ return -EINVAL;
}
- return -EINVAL;
}
#ifdef CONFIG_COMPAT
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 67bc96403a4e..fdca300f6003 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -189,9 +189,8 @@ static int gpiochip_find_base(int ngpio)
/* found a free space? */
if (gdev->base + gdev->ngpio <= base)
break;
- else
- /* nope, check the space right before the chip */
- base = gdev->base - ngpio;
+ /* nope, check the space right before the chip */
+ base = gdev->base - ngpio;
}
if (gpio_is_valid(base)) {
@@ -2410,8 +2409,7 @@ int gpiod_direction_output(struct gpio_desc *desc, int value)
ret = gpiod_direction_input(desc);
goto set_output_flag;
}
- }
- else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
+ } else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
ret = gpio_set_config(desc, PIN_CONFIG_DRIVE_OPEN_SOURCE);
if (!ret)
goto set_output_value;
@@ -2568,9 +2566,9 @@ static int gpiod_get_raw_value_commit(const struct gpio_desc *desc)
static int gpio_chip_get_multiple(struct gpio_chip *gc,
unsigned long *mask, unsigned long *bits)
{
- if (gc->get_multiple) {
+ if (gc->get_multiple)
return gc->get_multiple(gc, mask, bits);
- } else if (gc->get) {
+ if (gc->get) {
int i, value;
for_each_set_bit(i, mask, gc->ngpio) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 491/731] gpiolib: cdev: fix NULL-pointer dereferences
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (489 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 490/731] gpiolib: Get rid of redundant else Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 492/731] gpiolib: make struct comments into real kernel docs Greg Kroah-Hartman
` (250 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bartosz Golaszewski,
Andy Shevchenko, Linus Walleij, Sasha Levin
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[ Upstream commit 533aae7c94dbc2b14301cfd68ae7e0e90f0c8438 ]
There are several places where we can crash the kernel by requesting
lines, unbinding the GPIO device, then calling any of the system calls
relevant to the GPIO character device's annonymous file descriptors:
ioctl(), read(), poll().
While I observed it with the GPIO simulator, it will also happen for any
of the GPIO devices that can be hot-unplugged - for instance any HID GPIO
expander (e.g. CP2112).
This affects both v1 and v2 uAPI.
This fixes it partially by checking if gdev->chip is not NULL but it
doesn't entirely remedy the situation as we still have a race condition
in which another thread can remove the device after the check.
Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Fixes: a54756cb24ea ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Fixes: 7b8e00d98168 ("gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpiolib-cdev.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index a20396a6448b..64e37618216f 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -200,6 +200,9 @@ static long linehandle_ioctl(struct file *file, unsigned int cmd,
unsigned int i;
int ret;
+ if (!lh->gdev->chip)
+ return -ENODEV;
+
switch (cmd) {
case GPIOHANDLE_GET_LINE_VALUES_IOCTL:
/* NOTE: It's okay to read values of output lines */
@@ -1188,6 +1191,9 @@ static long linereq_ioctl(struct file *file, unsigned int cmd,
struct linereq *lr = file->private_data;
void __user *ip = (void __user *)arg;
+ if (!lr->gdev->chip)
+ return -ENODEV;
+
switch (cmd) {
case GPIO_V2_LINE_GET_VALUES_IOCTL:
return linereq_get_values(lr, ip);
@@ -1214,6 +1220,9 @@ static __poll_t linereq_poll(struct file *file,
struct linereq *lr = file->private_data;
__poll_t events = 0;
+ if (!lr->gdev->chip)
+ return EPOLLHUP | EPOLLERR;
+
poll_wait(file, &lr->wait, wait);
if (!kfifo_is_empty_spinlocked_noirqsave(&lr->events,
@@ -1233,6 +1242,9 @@ static ssize_t linereq_read(struct file *file,
ssize_t bytes_read = 0;
int ret;
+ if (!lr->gdev->chip)
+ return -ENODEV;
+
if (count < sizeof(le))
return -EINVAL;
@@ -1498,6 +1510,9 @@ static __poll_t lineevent_poll(struct file *file,
struct lineevent_state *le = file->private_data;
__poll_t events = 0;
+ if (!le->gdev->chip)
+ return EPOLLHUP | EPOLLERR;
+
poll_wait(file, &le->wait, wait);
if (!kfifo_is_empty_spinlocked_noirqsave(&le->events, &le->wait.lock))
@@ -1522,6 +1537,9 @@ static ssize_t lineevent_read(struct file *file,
ssize_t ge_size;
int ret;
+ if (!le->gdev->chip)
+ return -ENODEV;
+
/*
* When compatible system call is being used the struct gpioevent_data,
* in case of at least ia32, has different size due to the alignment
@@ -1603,6 +1621,9 @@ static long lineevent_ioctl(struct file *file, unsigned int cmd,
void __user *ip = (void __user *)arg;
struct gpiohandle_data ghd;
+ if (!le->gdev->chip)
+ return -ENODEV;
+
/*
* We can get the value for an event line but not set it,
* because it is input by definition.
@@ -2187,6 +2208,9 @@ static __poll_t lineinfo_watch_poll(struct file *file,
struct gpio_chardev_data *cdev = file->private_data;
__poll_t events = 0;
+ if (!cdev->gdev->chip)
+ return EPOLLHUP | EPOLLERR;
+
poll_wait(file, &cdev->wait, pollt);
if (!kfifo_is_empty_spinlocked_noirqsave(&cdev->events,
@@ -2205,6 +2229,9 @@ static ssize_t lineinfo_watch_read(struct file *file, char __user *buf,
int ret;
size_t event_size;
+ if (!cdev->gdev->chip)
+ return -ENODEV;
+
#ifndef CONFIG_GPIO_CDEV_V1
event_size = sizeof(struct gpio_v2_line_info_changed);
if (count < event_size)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 492/731] gpiolib: make struct comments into real kernel docs
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (490 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 491/731] gpiolib: cdev: fix NULL-pointer dereferences Greg Kroah-Hartman
@ 2022-12-28 14:39 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 493/731] gpiolib: protect the GPIO device against being dropped while in use by user-space Greg Kroah-Hartman
` (249 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Randy Dunlap, Bartosz Golaszewski,
Andy Shevchenko, Sasha Levin
From: Bartosz Golaszewski <brgl@bgdev.pl>
[ Upstream commit 4398693a9e24bcab0b99ea219073917991d0792b ]
We have several comments that start with '/**' but don't conform to the
kernel doc standard. Add proper detailed descriptions for the affected
definitions and move the docs from the forward declarations to the
struct definitions where applicable.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Stable-dep-of: bdbbae241a04 ("gpiolib: protect the GPIO device against being dropped while in use by user-space")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpiolib.h | 34 ++++++++++++++++++++++++++++++++++
include/linux/gpio/consumer.h | 35 ++++++++++++++++-------------------
2 files changed, 50 insertions(+), 19 deletions(-)
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index c31f4626915d..d77be9d1da80 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -37,6 +37,9 @@
* or name of the IP component in a System on Chip.
* @data: per-instance data assigned by the driver
* @list: links gpio_device:s together for traversal
+ * @notifier: used to notify subscribers about lines being requested, released
+ * or reconfigured
+ * @pin_ranges: range of pins served by the GPIO driver
*
* This state container holds most of the runtime variable data
* for a GPIO device and can hold references and live on after the
@@ -72,6 +75,20 @@ struct gpio_device {
/* gpio suffixes used for ACPI and device tree lookup */
static __maybe_unused const char * const gpio_suffixes[] = { "gpios", "gpio" };
+/**
+ * struct gpio_array - Opaque descriptor for a structure of GPIO array attributes
+ *
+ * @desc: Array of pointers to the GPIO descriptors
+ * @size: Number of elements in desc
+ * @chip: Parent GPIO chip
+ * @get_mask: Get mask used in fastpath
+ * @set_mask: Set mask used in fastpath
+ * @invert_mask: Invert mask used in fastpath
+ *
+ * This structure is attached to struct gpiod_descs obtained from
+ * gpiod_get_array() and can be passed back to get/set array functions in order
+ * to activate fast processing path if applicable.
+ */
struct gpio_array {
struct gpio_desc **desc;
unsigned int size;
@@ -96,6 +113,23 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
extern spinlock_t gpio_lock;
extern struct list_head gpio_devices;
+
+/**
+ * struct gpio_desc - Opaque descriptor for a GPIO
+ *
+ * @gdev: Pointer to the parent GPIO device
+ * @flags: Binary descriptor flags
+ * @label: Name of the consumer
+ * @name: Line name
+ * @hog: Pointer to the device node that hogs this line (if any)
+ * @debounce_period_us: Debounce period in microseconds
+ *
+ * These are obtained using gpiod_get() and are preferable to the old
+ * integer-based handles.
+ *
+ * Contrary to integers, a pointer to a &struct gpio_desc is guaranteed to be
+ * valid until the GPIO is released.
+ */
struct gpio_desc {
struct gpio_device *gdev;
unsigned long flags;
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index 97a28ad3393b..369902d52f9c 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -8,27 +8,16 @@
#include <linux/err.h>
struct device;
-
-/**
- * Opaque descriptor for a GPIO. These are obtained using gpiod_get() and are
- * preferable to the old integer-based handles.
- *
- * Contrary to integers, a pointer to a gpio_desc is guaranteed to be valid
- * until the GPIO is released.
- */
struct gpio_desc;
-
-/**
- * Opaque descriptor for a structure of GPIO array attributes. This structure
- * is attached to struct gpiod_descs obtained from gpiod_get_array() and can be
- * passed back to get/set array functions in order to activate fast processing
- * path if applicable.
- */
struct gpio_array;
/**
- * Struct containing an array of descriptors that can be obtained using
- * gpiod_get_array().
+ * struct gpio_descs - Struct containing an array of descriptors that can be
+ * obtained using gpiod_get_array()
+ *
+ * @info: Pointer to the opaque gpio_array structure
+ * @ndescs: Number of held descriptors
+ * @desc: Array of pointers to GPIO descriptors
*/
struct gpio_descs {
struct gpio_array *info;
@@ -43,8 +32,16 @@ struct gpio_descs {
#define GPIOD_FLAGS_BIT_NONEXCLUSIVE BIT(4)
/**
- * Optional flags that can be passed to one of gpiod_* to configure direction
- * and output value. These values cannot be OR'd.
+ * enum gpiod_flags - Optional flags that can be passed to one of gpiod_* to
+ * configure direction and output value. These values
+ * cannot be OR'd.
+ *
+ * @GPIOD_ASIS: Don't change anything
+ * @GPIOD_IN: Set lines to input mode
+ * @GPIOD_OUT_LOW: Set lines to output and drive them low
+ * @GPIOD_OUT_HIGH: Set lines to output and drive them high
+ * @GPIOD_OUT_LOW_OPEN_DRAIN: Set lines to open-drain output and drive them low
+ * @GPIOD_OUT_HIGH_OPEN_DRAIN: Set lines to open-drain output and drive them high
*/
enum gpiod_flags {
GPIOD_ASIS = 0,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 493/731] gpiolib: protect the GPIO device against being dropped while in use by user-space
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (491 preceding siblings ...)
2022-12-28 14:39 ` [PATCH 5.15 492/731] gpiolib: make struct comments into real kernel docs Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 494/731] i2c: mux: reg: check return value after calling platform_get_resource() Greg Kroah-Hartman
` (248 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bartosz Golaszewski, Kent Gibson,
Andy Shevchenko, Linus Walleij, Sasha Levin, Nick Hainke
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[ Upstream commit bdbbae241a04f387ba910b8609f95fad5f1470c7 ]
While any of the GPIO cdev syscalls is in progress, the kernel can call
gpiochip_remove() (for instance, when a USB GPIO expander is disconnected)
which will set gdev->chip to NULL after which any subsequent access will
cause a crash.
To avoid that: use an RW-semaphore in which the syscalls take it for
reading (so that we don't needlessly prohibit the user-space from calling
syscalls simultaneously) while gpiochip_remove() takes it for writing so
that it can only happen once all syscalls return.
Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Fixes: a54756cb24ea ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Fixes: 7b8e00d98168 ("gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[Nick: fixed a build failure with CDEV_V1 disabled]
Co-authored-by: Nick Hainke <vincent@systemli.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpiolib-cdev.c | 177 +++++++++++++++++++++++++++++++-----
drivers/gpio/gpiolib.c | 4 +
drivers/gpio/gpiolib.h | 5 +
3 files changed, 161 insertions(+), 25 deletions(-)
diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index 64e37618216f..2a2e0691462b 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -54,6 +54,50 @@ static_assert(IS_ALIGNED(sizeof(struct gpio_v2_line_values), 8));
* interface to gpiolib GPIOs via ioctl()s.
*/
+typedef __poll_t (*poll_fn)(struct file *, struct poll_table_struct *);
+typedef long (*ioctl_fn)(struct file *, unsigned int, unsigned long);
+typedef ssize_t (*read_fn)(struct file *, char __user *,
+ size_t count, loff_t *);
+
+static __poll_t call_poll_locked(struct file *file,
+ struct poll_table_struct *wait,
+ struct gpio_device *gdev, poll_fn func)
+{
+ __poll_t ret;
+
+ down_read(&gdev->sem);
+ ret = func(file, wait);
+ up_read(&gdev->sem);
+
+ return ret;
+}
+
+static long call_ioctl_locked(struct file *file, unsigned int cmd,
+ unsigned long arg, struct gpio_device *gdev,
+ ioctl_fn func)
+{
+ long ret;
+
+ down_read(&gdev->sem);
+ ret = func(file, cmd, arg);
+ up_read(&gdev->sem);
+
+ return ret;
+}
+
+static ssize_t call_read_locked(struct file *file, char __user *buf,
+ size_t count, loff_t *f_ps,
+ struct gpio_device *gdev, read_fn func)
+{
+ ssize_t ret;
+
+ down_read(&gdev->sem);
+ ret = func(file, buf, count, f_ps);
+ up_read(&gdev->sem);
+
+ return ret;
+}
+
/*
* GPIO line handle management
*/
@@ -190,8 +234,8 @@ static long linehandle_set_config(struct linehandle_state *lh,
return 0;
}
-static long linehandle_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
+static long linehandle_ioctl_unlocked(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
struct linehandle_state *lh = file->private_data;
void __user *ip = (void __user *)arg;
@@ -249,6 +293,15 @@ static long linehandle_ioctl(struct file *file, unsigned int cmd,
}
}
+static long linehandle_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ struct linehandle_state *lh = file->private_data;
+
+ return call_ioctl_locked(file, cmd, arg, lh->gdev,
+ linehandle_ioctl_unlocked);
+}
+
#ifdef CONFIG_COMPAT
static long linehandle_ioctl_compat(struct file *file, unsigned int cmd,
unsigned long arg)
@@ -1185,8 +1238,8 @@ static long linereq_set_config(struct linereq *lr, void __user *ip)
return ret;
}
-static long linereq_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
+static long linereq_ioctl_unlocked(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
struct linereq *lr = file->private_data;
void __user *ip = (void __user *)arg;
@@ -1206,6 +1259,15 @@ static long linereq_ioctl(struct file *file, unsigned int cmd,
}
}
+static long linereq_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ struct linereq *lr = file->private_data;
+
+ return call_ioctl_locked(file, cmd, arg, lr->gdev,
+ linereq_ioctl_unlocked);
+}
+
#ifdef CONFIG_COMPAT
static long linereq_ioctl_compat(struct file *file, unsigned int cmd,
unsigned long arg)
@@ -1214,8 +1276,8 @@ static long linereq_ioctl_compat(struct file *file, unsigned int cmd,
}
#endif
-static __poll_t linereq_poll(struct file *file,
- struct poll_table_struct *wait)
+static __poll_t linereq_poll_unlocked(struct file *file,
+ struct poll_table_struct *wait)
{
struct linereq *lr = file->private_data;
__poll_t events = 0;
@@ -1232,10 +1294,16 @@ static __poll_t linereq_poll(struct file *file,
return events;
}
-static ssize_t linereq_read(struct file *file,
- char __user *buf,
- size_t count,
- loff_t *f_ps)
+static __poll_t linereq_poll(struct file *file,
+ struct poll_table_struct *wait)
+{
+ struct linereq *lr = file->private_data;
+
+ return call_poll_locked(file, wait, lr->gdev, linereq_poll_unlocked);
+}
+
+static ssize_t linereq_read_unlocked(struct file *file, char __user *buf,
+ size_t count, loff_t *f_ps)
{
struct linereq *lr = file->private_data;
struct gpio_v2_line_event le;
@@ -1289,6 +1357,15 @@ static ssize_t linereq_read(struct file *file,
return bytes_read;
}
+static ssize_t linereq_read(struct file *file, char __user *buf,
+ size_t count, loff_t *f_ps)
+{
+ struct linereq *lr = file->private_data;
+
+ return call_read_locked(file, buf, count, f_ps, lr->gdev,
+ linereq_read_unlocked);
+}
+
static void linereq_free(struct linereq *lr)
{
unsigned int i;
@@ -1504,8 +1581,8 @@ struct lineevent_state {
(GPIOEVENT_REQUEST_RISING_EDGE | \
GPIOEVENT_REQUEST_FALLING_EDGE)
-static __poll_t lineevent_poll(struct file *file,
- struct poll_table_struct *wait)
+static __poll_t lineevent_poll_unlocked(struct file *file,
+ struct poll_table_struct *wait)
{
struct lineevent_state *le = file->private_data;
__poll_t events = 0;
@@ -1521,15 +1598,21 @@ static __poll_t lineevent_poll(struct file *file,
return events;
}
+static __poll_t lineevent_poll(struct file *file,
+ struct poll_table_struct *wait)
+{
+ struct lineevent_state *le = file->private_data;
+
+ return call_poll_locked(file, wait, le->gdev, lineevent_poll_unlocked);
+}
+
struct compat_gpioeevent_data {
compat_u64 timestamp;
u32 id;
};
-static ssize_t lineevent_read(struct file *file,
- char __user *buf,
- size_t count,
- loff_t *f_ps)
+static ssize_t lineevent_read_unlocked(struct file *file, char __user *buf,
+ size_t count, loff_t *f_ps)
{
struct lineevent_state *le = file->private_data;
struct gpioevent_data ge;
@@ -1597,6 +1680,15 @@ static ssize_t lineevent_read(struct file *file,
return bytes_read;
}
+static ssize_t lineevent_read(struct file *file, char __user *buf,
+ size_t count, loff_t *f_ps)
+{
+ struct lineevent_state *le = file->private_data;
+
+ return call_read_locked(file, buf, count, f_ps, le->gdev,
+ lineevent_read_unlocked);
+}
+
static void lineevent_free(struct lineevent_state *le)
{
if (le->irq)
@@ -1614,8 +1706,8 @@ static int lineevent_release(struct inode *inode, struct file *file)
return 0;
}
-static long lineevent_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
+static long lineevent_ioctl_unlocked(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
struct lineevent_state *le = file->private_data;
void __user *ip = (void __user *)arg;
@@ -1646,6 +1738,15 @@ static long lineevent_ioctl(struct file *file, unsigned int cmd,
return -EINVAL;
}
+static long lineevent_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ struct lineevent_state *le = file->private_data;
+
+ return call_ioctl_locked(file, cmd, arg, le->gdev,
+ lineevent_ioctl_unlocked);
+}
+
#ifdef CONFIG_COMPAT
static long lineevent_ioctl_compat(struct file *file, unsigned int cmd,
unsigned long arg)
@@ -2202,8 +2303,8 @@ static int lineinfo_changed_notify(struct notifier_block *nb,
return NOTIFY_OK;
}
-static __poll_t lineinfo_watch_poll(struct file *file,
- struct poll_table_struct *pollt)
+static __poll_t lineinfo_watch_poll_unlocked(struct file *file,
+ struct poll_table_struct *pollt)
{
struct gpio_chardev_data *cdev = file->private_data;
__poll_t events = 0;
@@ -2220,8 +2321,17 @@ static __poll_t lineinfo_watch_poll(struct file *file,
return events;
}
-static ssize_t lineinfo_watch_read(struct file *file, char __user *buf,
- size_t count, loff_t *off)
+static __poll_t lineinfo_watch_poll(struct file *file,
+ struct poll_table_struct *pollt)
+{
+ struct gpio_chardev_data *cdev = file->private_data;
+
+ return call_poll_locked(file, pollt, cdev->gdev,
+ lineinfo_watch_poll_unlocked);
+}
+
+static ssize_t lineinfo_watch_read_unlocked(struct file *file, char __user *buf,
+ size_t count, loff_t *off)
{
struct gpio_chardev_data *cdev = file->private_data;
struct gpio_v2_line_info_changed event;
@@ -2299,6 +2409,15 @@ static ssize_t lineinfo_watch_read(struct file *file, char __user *buf,
return bytes_read;
}
+static ssize_t lineinfo_watch_read(struct file *file, char __user *buf,
+ size_t count, loff_t *off)
+{
+ struct gpio_chardev_data *cdev = file->private_data;
+
+ return call_read_locked(file, buf, count, off, cdev->gdev,
+ lineinfo_watch_read_unlocked);
+}
+
/**
* gpio_chrdev_open() - open the chardev for ioctl operations
* @inode: inode for this chardev
@@ -2312,13 +2431,17 @@ static int gpio_chrdev_open(struct inode *inode, struct file *file)
struct gpio_chardev_data *cdev;
int ret = -ENOMEM;
+ down_read(&gdev->sem);
+
/* Fail on open if the backing gpiochip is gone */
- if (!gdev->chip)
- return -ENODEV;
+ if (!gdev->chip) {
+ ret = -ENODEV;
+ goto out_unlock;
+ }
cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
if (!cdev)
- return -ENOMEM;
+ goto out_unlock;
cdev->watched_lines = bitmap_zalloc(gdev->chip->ngpio, GFP_KERNEL);
if (!cdev->watched_lines)
@@ -2341,6 +2464,8 @@ static int gpio_chrdev_open(struct inode *inode, struct file *file)
if (ret)
goto out_unregister_notifier;
+ up_read(&gdev->sem);
+
return ret;
out_unregister_notifier:
@@ -2350,6 +2475,8 @@ static int gpio_chrdev_open(struct inode *inode, struct file *file)
bitmap_free(cdev->watched_lines);
out_free_cdev:
kfree(cdev);
+out_unlock:
+ up_read(&gdev->sem);
return ret;
}
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index fdca300f6003..8c041a8dd9d8 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -727,6 +727,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
spin_unlock_irqrestore(&gpio_lock, flags);
BLOCKING_INIT_NOTIFIER_HEAD(&gdev->notifier);
+ init_rwsem(&gdev->sem);
#ifdef CONFIG_PINCTRL
INIT_LIST_HEAD(&gdev->pin_ranges);
@@ -865,6 +866,8 @@ void gpiochip_remove(struct gpio_chip *gc)
unsigned long flags;
unsigned int i;
+ down_write(&gdev->sem);
+
/* FIXME: should the legacy sysfs handling be moved to gpio_device? */
gpiochip_sysfs_unregister(gdev);
gpiochip_free_hogs(gc);
@@ -899,6 +902,7 @@ void gpiochip_remove(struct gpio_chip *gc)
* gone.
*/
gcdev_unregister(gdev);
+ up_write(&gdev->sem);
put_device(&gdev->dev);
}
EXPORT_SYMBOL_GPL(gpiochip_remove);
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index d77be9d1da80..73b732a1d9c9 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -15,6 +15,7 @@
#include <linux/device.h>
#include <linux/module.h>
#include <linux/cdev.h>
+#include <linux/rwsem.h>
#define GPIOCHIP_NAME "gpiochip"
@@ -39,6 +40,9 @@
* @list: links gpio_device:s together for traversal
* @notifier: used to notify subscribers about lines being requested, released
* or reconfigured
+ * @sem: protects the structure from a NULL-pointer dereference of @chip by
+ * user-space operations when the device gets unregistered during
+ * a hot-unplug event
* @pin_ranges: range of pins served by the GPIO driver
*
* This state container holds most of the runtime variable data
@@ -60,6 +64,7 @@ struct gpio_device {
void *data;
struct list_head list;
struct blocking_notifier_head notifier;
+ struct rw_semaphore sem;
#ifdef CONFIG_PINCTRL
/*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 494/731] i2c: mux: reg: check return value after calling platform_get_resource()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (492 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 493/731] gpiolib: protect the GPIO device against being dropped while in use by user-space Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 495/731] i2c: ismt: Fix an out-of-bounds bug in ismt_access() Greg Kroah-Hartman
` (247 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Wolfram Sang, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 2d47b79d2bd39cc6369eccf94a06568d84c906ae ]
It will cause null-ptr-deref in resource_size(), if platform_get_resource()
returns NULL, move calling resource_size() after devm_ioremap_resource() that
will check 'res' to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Fixes: b3fdd32799d8 ("i2c: mux: Add register-based mux i2c-mux-reg")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/muxes/i2c-mux-reg.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c
index 0e0679f65cf7..30a6de1694e0 100644
--- a/drivers/i2c/muxes/i2c-mux-reg.c
+++ b/drivers/i2c/muxes/i2c-mux-reg.c
@@ -183,13 +183,12 @@ static int i2c_mux_reg_probe(struct platform_device *pdev)
if (!mux->data.reg) {
dev_info(&pdev->dev,
"Register not set, using platform resource\n");
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mux->data.reg_size = resource_size(res);
- mux->data.reg = devm_ioremap_resource(&pdev->dev, res);
+ mux->data.reg = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(mux->data.reg)) {
ret = PTR_ERR(mux->data.reg);
goto err_put_parent;
}
+ mux->data.reg_size = resource_size(res);
}
if (mux->data.reg_size != 4 && mux->data.reg_size != 2 &&
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 495/731] i2c: ismt: Fix an out-of-bounds bug in ismt_access()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (493 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 494/731] i2c: mux: reg: check return value after calling platform_get_resource() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 496/731] usb: storage: Add check for kcalloc Greg Kroah-Hartman
` (246 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zheyu Ma, Wolfram Sang, Sasha Levin
From: Zheyu Ma <zheyuma97@gmail.com>
[ Upstream commit 39244cc754829bf707dccd12e2ce37510f5b1f8d ]
When the driver does not check the data from the user, the variable
'data->block[0]' may be very large to cause an out-of-bounds bug.
The following log can reveal it:
[ 33.995542] i2c i2c-1: ioctl, cmd=0x720, arg=0x7ffcb3dc3a20
[ 33.995978] ismt_smbus 0000:00:05.0: I2C_SMBUS_BLOCK_DATA: WRITE
[ 33.996475] ==================================================================
[ 33.996995] BUG: KASAN: out-of-bounds in ismt_access.cold+0x374/0x214b
[ 33.997473] Read of size 18446744073709551615 at addr ffff88810efcfdb1 by task ismt_poc/485
[ 33.999450] Call Trace:
[ 34.001849] memcpy+0x20/0x60
[ 34.002077] ismt_access.cold+0x374/0x214b
[ 34.003382] __i2c_smbus_xfer+0x44f/0xfb0
[ 34.004007] i2c_smbus_xfer+0x10a/0x390
[ 34.004291] i2cdev_ioctl_smbus+0x2c8/0x710
[ 34.005196] i2cdev_ioctl+0x5ec/0x74c
Fix this bug by checking the size of 'data->block[0]' first.
Fixes: 13f35ac14cd0 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-ismt.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 483428c5e30b..10cdd501d4c5 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -509,6 +509,9 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
if (read_write == I2C_SMBUS_WRITE) {
/* Block Write */
dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA: WRITE\n");
+ if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ return -EINVAL;
+
dma_size = data->block[0] + 1;
dma_direction = DMA_TO_DEVICE;
desc->wr_len_cmd = dma_size;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 496/731] usb: storage: Add check for kcalloc
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (494 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 495/731] i2c: ismt: Fix an out-of-bounds bug in ismt_access() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 497/731] tracing/hist: Fix issue of losting command info in error_log Greg Kroah-Hartman
` (245 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alan Stern, Jiasheng Jiang, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit c35ca10f53c51eeb610d3f8fbc6dd6d511b58a58 ]
As kcalloc may return NULL pointer, the return value should
be checked and return error if fails as same as the ones in
alauda_read_map.
Fixes: e80b0fade09e ("[PATCH] USB Storage: add alauda support")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221208110058.12983-1-jiasheng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/storage/alauda.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 20b857e97e60..7e4ce0e7e05a 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -438,6 +438,8 @@ static int alauda_init_media(struct us_data *us)
+ MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
+ if (MEDIA_INFO(us).pba_to_lba == NULL || MEDIA_INFO(us).lba_to_pba == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
if (alauda_reset_media(us) != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 497/731] tracing/hist: Fix issue of losting command info in error_log
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (495 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 496/731] usb: storage: Add check for kcalloc Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 498/731] ksmbd: Fix resource leak in ksmbd_session_rpc_open() Greg Kroah-Hartman
` (244 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, mhiramat, zanussi, Zheng Yejian,
Steven Rostedt (Google),
Sasha Levin
From: Zheng Yejian <zhengyejian1@huawei.com>
[ Upstream commit 608c6ed3337850c767ab0dd6c583477922233e29 ]
When input some constructed invalid 'trigger' command, command info
in 'error_log' are lost [1].
The root cause is that there is a path that event_hist_trigger_parse()
is recursely called once and 'last_cmd' which save origin command is
cleared, then later calling of hist_err() will no longer record origin
command info:
event_hist_trigger_parse() {
last_cmd_set() // <1> 'last_cmd' save origin command here at first
create_actions() {
onmatch_create() {
action_create() {
trace_action_create() {
trace_action_create_field_var() {
create_field_var_hist() {
event_hist_trigger_parse() { // <2> recursely called once
hist_err_clear() // <3> 'last_cmd' is cleared here
}
hist_err() // <4> No longer find origin command!!!
Since 'glob' is empty string while running into the recurse call, we
can trickly check it and bypass the call of hist_err_clear() to solve it.
[1]
# cd /sys/kernel/tracing
# echo "my_synth_event int v1; int v2; int v3;" >> synthetic_events
# echo 'hist:keys=pid' >> events/sched/sched_waking/trigger
# echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\
pid,pid1)" >> events/sched/sched_switch/trigger
# cat error_log
[ 8.405018] hist:sched:sched_switch: error: Couldn't find synthetic event
Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
^
[ 8.816902] hist:sched:sched_switch: error: Couldn't find field
Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
^
[ 8.816902] hist:sched:sched_switch: error: Couldn't parse field variable
Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
^
[ 8.999880] : error: Couldn't find field
Command:
^
[ 8.999880] : error: Couldn't parse field variable
Command:
^
[ 8.999880] : error: Couldn't find field
Command:
^
[ 8.999880] : error: Couldn't create histogram for field
Command:
^
Link: https://lore.kernel.org/linux-trace-kernel/20221207135326.3483216-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Fixes: f404da6e1d46 ("tracing: Add 'last error' error facility for hist triggers")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/trace/trace_events_hist.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c
index 31e3e0bbd129..6397285883fa 100644
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -5954,7 +5954,7 @@ static int event_hist_trigger_func(struct event_command *cmd_ops,
/* Just return zero, not the number of registered triggers */
ret = 0;
out:
- if (ret == 0)
+ if (ret == 0 && glob[0])
hist_err_clear();
return ret;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 498/731] ksmbd: Fix resource leak in ksmbd_session_rpc_open()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (496 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 497/731] tracing/hist: Fix issue of losting command info in error_log Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 499/731] samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe() Greg Kroah-Hartman
` (243 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiu Jianfeng, Namjae Jeon,
Steve French, Sasha Levin
From: Xiu Jianfeng <xiujianfeng@huawei.com>
[ Upstream commit bc044414fa0326a4e5c3c509c00b1fcaf621b5f4 ]
When ksmbd_rpc_open() fails then it must call ksmbd_rpc_id_free() to
undo the result of ksmbd_ipc_id_alloc().
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ksmbd/mgmt/user_session.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/fs/ksmbd/mgmt/user_session.c b/fs/ksmbd/mgmt/user_session.c
index 8d8ffd8c6f19..0fa467f2c897 100644
--- a/fs/ksmbd/mgmt/user_session.c
+++ b/fs/ksmbd/mgmt/user_session.c
@@ -106,15 +106,17 @@ int ksmbd_session_rpc_open(struct ksmbd_session *sess, char *rpc_name)
entry->method = method;
entry->id = ksmbd_ipc_id_alloc();
if (entry->id < 0)
- goto error;
+ goto free_entry;
resp = ksmbd_rpc_open(sess, entry->id);
if (!resp)
- goto error;
+ goto free_id;
kvfree(resp);
return entry->id;
-error:
+free_id:
+ ksmbd_rpc_id_free(entry->id);
+free_entry:
list_del(&entry->list);
kfree(entry);
return -EINVAL;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 499/731] samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (497 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 498/731] ksmbd: Fix resource leak in ksmbd_session_rpc_open() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 500/731] thermal/drivers/imx8mm_thermal: Validate temperature range Greg Kroah-Hartman
` (242 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Alex Williamson,
Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit d1f0f50fbbbbca1e3e8157e51934613bf88f6d44 ]
Add missing pci_disable_device() in fail path of mdpy_fb_probe().
Besides, fix missing release functions in mdpy_fb_remove().
Fixes: cacade1946a4 ("sample: vfio mdev display - guest driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221208013341.3999-1-shangxiaojing@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
samples/vfio-mdev/mdpy-fb.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/samples/vfio-mdev/mdpy-fb.c b/samples/vfio-mdev/mdpy-fb.c
index 9ec93d90e8a5..4eb7aa11cfbb 100644
--- a/samples/vfio-mdev/mdpy-fb.c
+++ b/samples/vfio-mdev/mdpy-fb.c
@@ -109,7 +109,7 @@ static int mdpy_fb_probe(struct pci_dev *pdev,
ret = pci_request_regions(pdev, "mdpy-fb");
if (ret < 0)
- return ret;
+ goto err_disable_dev;
pci_read_config_dword(pdev, MDPY_FORMAT_OFFSET, &format);
pci_read_config_dword(pdev, MDPY_WIDTH_OFFSET, &width);
@@ -191,6 +191,9 @@ static int mdpy_fb_probe(struct pci_dev *pdev,
err_release_regions:
pci_release_regions(pdev);
+err_disable_dev:
+ pci_disable_device(pdev);
+
return ret;
}
@@ -199,7 +202,10 @@ static void mdpy_fb_remove(struct pci_dev *pdev)
struct fb_info *info = pci_get_drvdata(pdev);
unregister_framebuffer(info);
+ iounmap(info->screen_base);
framebuffer_release(info);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
}
static struct pci_device_id mdpy_fb_pci_table[] = {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 500/731] thermal/drivers/imx8mm_thermal: Validate temperature range
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (498 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 499/731] samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 501/731] thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2 Greg Kroah-Hartman
` (241 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marcus Folkesson, Jacky Bai,
Daniel Lezcano, Sasha Levin
From: Marcus Folkesson <marcus.folkesson@gmail.com>
[ Upstream commit d37edc7370273306d8747097fafa62436c1cfe16 ]
Check against the upper temperature limit (125 degrees C) before
consider the temperature valid.
Fixes: 5eed800a6811 ("thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Link: https://lore.kernel.org/r/20221014073507.1594844-1-marcus.folkesson@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/imx8mm_thermal.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index af666bd9e8d4..c5cd873c6e01 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -65,8 +65,14 @@ static int imx8mm_tmu_get_temp(void *data, int *temp)
u32 val;
val = readl_relaxed(tmu->base + TRITSR) & TRITSR_TEMP0_VAL_MASK;
+
+ /*
+ * Do not validate against the V bit (bit 31) due to errata
+ * ERR051272: TMU: Bit 31 of registers TMU_TSCR/TMU_TRITSR/TMU_TRATSR invalid
+ */
+
*temp = val * 1000;
- if (*temp < VER1_TEMP_LOW_LIMIT)
+ if (*temp < VER1_TEMP_LOW_LIMIT || *temp > VER2_TEMP_HIGH_LIMIT)
return -EAGAIN;
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 501/731] thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (499 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 500/731] thermal/drivers/imx8mm_thermal: Validate temperature range Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 502/731] thermal/drivers/qcom/lmh: Fix irq handler return value Greg Kroah-Hartman
` (240 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Luca Weiss, Amit Kucheria,
Daniel Lezcano, Sasha Levin
From: Luca Weiss <luca.weiss@fairphone.com>
[ Upstream commit 8763f8acbf8aef22a2321d4c978cd078aa3b8f64 ]
On gen2 chips the stage2 threshold is not 140 degC but 125 degC.
Make the warning message clearer by using this variable and also by
including the temperature that was checked for.
Fixes: aa92b3310c55 ("thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 1 PMIC peripherals")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Amit Kucheria <amitk@kernel.org>
Link: https://lore.kernel.org/r/20221020145237.942146-1-luca.weiss@fairphone.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index 7419e196dbb0..1037de19873a 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -251,7 +251,8 @@ static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
disable_s2_shutdown = true;
else
dev_warn(chip->dev,
- "No ADC is configured and critical temperature is above the maximum stage 2 threshold of 140 C! Configuring stage 2 shutdown at 140 C.\n");
+ "No ADC is configured and critical temperature %d mC is above the maximum stage 2 threshold of %ld mC! Configuring stage 2 shutdown at %ld mC.\n",
+ temp, stage2_threshold_max, stage2_threshold_max);
}
skip:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 502/731] thermal/drivers/qcom/lmh: Fix irq handler return value
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (500 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 501/731] thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2 Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 503/731] fbdev: ssd1307fb: Drop optional dependency Greg Kroah-Hartman
` (239 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Daniel Lezcano, Bjorn Andersson,
Dmitry Baryshkov, Daniel Lezcano, Sasha Levin
From: Bjorn Andersson <bjorn.andersson@linaro.org>
[ Upstream commit 46a891e45be97c6781ac34f5ec777d69370e252b ]
After enough invocations the LMh irq is eventually reported as bad, because the
handler doesn't return IRQ_HANDLED, fix this.
Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver")
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220316180322.88132-1-bjorn.andersson@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/qcom/lmh.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
index eafa7526eb8b..cc94d8b005d4 100644
--- a/drivers/thermal/qcom/lmh.c
+++ b/drivers/thermal/qcom/lmh.c
@@ -43,7 +43,7 @@ static irqreturn_t lmh_handle_irq(int hw_irq, void *data)
if (irq)
generic_handle_irq(irq);
- return 0;
+ return IRQ_HANDLED;
}
static void lmh_enable_interrupt(struct irq_data *d)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 503/731] fbdev: ssd1307fb: Drop optional dependency
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (501 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 502/731] thermal/drivers/qcom/lmh: Fix irq handler return value Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 504/731] fbdev: pm2fb: fix missing pci_disable_device() Greg Kroah-Hartman
` (238 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko, Helge Deller, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 025e3b507a3a8e1ee96a3112bb67495c77d6cdb6 ]
Only a single out of three devices need a PWM, so from driver it's
optional. Moreover it's a single driver in the entire kernel that
currently selects PWM. Unfortunately this selection is a root cause
of the circular dependencies when we want to enable optional PWM
for some other drivers that select GPIOLIB.
Fixes: a2ed00da5047 ("drivers/video: add support for the Solomon SSD1307 OLED Controller")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 6ed5e608dd04..5050a9f8e879 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2218,7 +2218,6 @@ config FB_SSD1307
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_DEFERRED_IO
- select PWM
select FB_BACKLIGHT
help
This driver implements support for the Solomon SSD1307
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 504/731] fbdev: pm2fb: fix missing pci_disable_device()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (502 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 503/731] fbdev: ssd1307fb: Drop optional dependency Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 505/731] fbdev: via: Fix error in via_core_init() Greg Kroah-Hartman
` (237 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Helge Deller, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit ed359a464846b48f76ea6cc5cd8257e545ac97f4 ]
Add missing pci_disable_device() in error path of probe() and remove() path.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/pm2fb.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c
index cbcf112c88d3..e8690f7aea05 100644
--- a/drivers/video/fbdev/pm2fb.c
+++ b/drivers/video/fbdev/pm2fb.c
@@ -1530,8 +1530,10 @@ static int pm2fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
info = framebuffer_alloc(sizeof(struct pm2fb_par), &pdev->dev);
- if (!info)
- return -ENOMEM;
+ if (!info) {
+ err = -ENOMEM;
+ goto err_exit_disable;
+ }
default_par = info->par;
switch (pdev->device) {
@@ -1712,6 +1714,8 @@ static int pm2fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
release_mem_region(pm2fb_fix.mmio_start, pm2fb_fix.mmio_len);
err_exit_neither:
framebuffer_release(info);
+ err_exit_disable:
+ pci_disable_device(pdev);
return retval;
}
@@ -1738,6 +1742,7 @@ static void pm2fb_remove(struct pci_dev *pdev)
fb_dealloc_cmap(&info->cmap);
kfree(info->pixmap.addr);
framebuffer_release(info);
+ pci_disable_device(pdev);
}
static const struct pci_device_id pm2fb_id_table[] = {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 505/731] fbdev: via: Fix error in via_core_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (503 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 504/731] fbdev: pm2fb: fix missing pci_disable_device() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 506/731] fbdev: vermilion: decrease reference count in error path Greg Kroah-Hartman
` (236 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Helge Deller, Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit 5886b130de953cfb8826f7771ec8640a79934a7f ]
via_core_init() won't exit the driver when pci_register_driver() failed.
Exit the viafb-i2c and the viafb-gpio in failed path to prevent error.
VIA Graphics Integration Chipset framebuffer 2.4 initializing
Error: Driver 'viafb-i2c' is already registered, aborting...
Error: Driver 'viafb-gpio' is already registered, aborting...
Fixes: 7582eb9be85f ("viafb: Turn GPIO and i2c into proper platform devices")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/via/via-core.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/via/via-core.c b/drivers/video/fbdev/via/via-core.c
index 89d75079b730..0363b478fa3e 100644
--- a/drivers/video/fbdev/via/via-core.c
+++ b/drivers/video/fbdev/via/via-core.c
@@ -725,7 +725,14 @@ static int __init via_core_init(void)
return ret;
viafb_i2c_init();
viafb_gpio_init();
- return pci_register_driver(&via_driver);
+ ret = pci_register_driver(&via_driver);
+ if (ret) {
+ viafb_gpio_exit();
+ viafb_i2c_exit();
+ return ret;
+ }
+
+ return 0;
}
static void __exit via_core_exit(void)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 506/731] fbdev: vermilion: decrease reference count in error path
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (504 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 505/731] fbdev: via: Fix error in via_core_init() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 507/731] fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe() Greg Kroah-Hartman
` (235 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang, Helge Deller, Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit 001f2cdb952a9566c77fb4b5470cc361db5601bb ]
pci_get_device() will increase the reference count for the returned
pci_dev. For the error path, we need to use pci_dev_put() to decrease
the reference count.
Fixes: dbe7e429fedb ("vmlfb: framebuffer driver for Intel Vermilion Range")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/vermilion/vermilion.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/vermilion/vermilion.c b/drivers/video/fbdev/vermilion/vermilion.c
index ff61605b8764..a543643ce014 100644
--- a/drivers/video/fbdev/vermilion/vermilion.c
+++ b/drivers/video/fbdev/vermilion/vermilion.c
@@ -277,8 +277,10 @@ static int vmlfb_get_gpu(struct vml_par *par)
mutex_unlock(&vml_mutex);
- if (pci_enable_device(par->gpu) < 0)
+ if (pci_enable_device(par->gpu) < 0) {
+ pci_dev_put(par->gpu);
return -ENODEV;
+ }
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 507/731] fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (505 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 506/731] fbdev: vermilion: decrease reference count in error path Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` Greg Kroah-Hartman
` (234 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Helge Deller, Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit c84bf485a5aaf9aa0764a58832b7ef4375c29f03 ]
The clk_disable_unprepare() should be called in the error handling
of register_framebuffer(), fix it.
Fixes: 0937a7b3625d ("video: ep93xx: Prepare clock before using it")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/ep93xx-fb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/ep93xx-fb.c b/drivers/video/fbdev/ep93xx-fb.c
index 2398b3d48fed..305f1587bd89 100644
--- a/drivers/video/fbdev/ep93xx-fb.c
+++ b/drivers/video/fbdev/ep93xx-fb.c
@@ -552,12 +552,14 @@ static int ep93xxfb_probe(struct platform_device *pdev)
err = register_framebuffer(info);
if (err)
- goto failed_check;
+ goto failed_framebuffer;
dev_info(info->dev, "registered. Mode = %dx%d-%d\n",
info->var.xres, info->var.yres, info->var.bits_per_pixel);
return 0;
+failed_framebuffer:
+ clk_disable_unprepare(fbi->clk);
failed_check:
if (fbi->mach_info->teardown)
fbi->mach_info->teardown(pdev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 508/731] fbdev: geode: dont build on UML
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 001/731] drm/amd/display: Manually adjust strobe for DCN303 Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 003/731] arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins Greg Kroah-Hartman
` (739 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Randy Dunlap, Johannes Berg,
Richard Weinberger, linux-um, Daniel Vetter, Helge Deller,
linux-fbdev, dri-devel, Andres Salomon, linux-geode, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 71c53e19226b0166ba387d3c590d0509f541a0a1 ]
The geode fbdev driver uses struct cpuinfo fields that are not present
on ARCH=um, so don't allow this driver to be built on UML.
Prevents these build errors:
In file included from ../arch/x86/include/asm/olpc.h:7:0,
from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:39: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
(boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
(boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:39: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
(boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
(boot_cpu_data.x86_model == 10));
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Andres Salomon <dilinger@queued.net>
Cc: linux-geode@lists.infradead.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/geode/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/geode/Kconfig b/drivers/video/fbdev/geode/Kconfig
index ac9c860592aa..85bc14b6faf6 100644
--- a/drivers/video/fbdev/geode/Kconfig
+++ b/drivers/video/fbdev/geode/Kconfig
@@ -5,6 +5,7 @@
config FB_GEODE
bool "AMD Geode family framebuffer support"
depends on FB && PCI && (X86_32 || (X86 && COMPILE_TEST))
+ depends on !UML
help
Say 'Y' here to allow you to select framebuffer drivers for
the AMD Geode family of processors.
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 508/731] fbdev: geode: dont build on UML
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
0 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Sasha Levin, Andres Salomon, linux-fbdev, Greg Kroah-Hartman,
Helge Deller, Randy Dunlap, linux-um, patches, dri-devel,
linux-geode, Richard Weinberger, Johannes Berg
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 71c53e19226b0166ba387d3c590d0509f541a0a1 ]
The geode fbdev driver uses struct cpuinfo fields that are not present
on ARCH=um, so don't allow this driver to be built on UML.
Prevents these build errors:
In file included from ../arch/x86/include/asm/olpc.h:7:0,
from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:39: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
(boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
(boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:39: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
(boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
(boot_cpu_data.x86_model == 10));
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Andres Salomon <dilinger@queued.net>
Cc: linux-geode@lists.infradead.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/geode/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/geode/Kconfig b/drivers/video/fbdev/geode/Kconfig
index ac9c860592aa..85bc14b6faf6 100644
--- a/drivers/video/fbdev/geode/Kconfig
+++ b/drivers/video/fbdev/geode/Kconfig
@@ -5,6 +5,7 @@
config FB_GEODE
bool "AMD Geode family framebuffer support"
depends on FB && PCI && (X86_32 || (X86 && COMPILE_TEST))
+ depends on !UML
help
Say 'Y' here to allow you to select framebuffer drivers for
the AMD Geode family of processors.
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 508/731] fbdev: geode: dont build on UML
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
0 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Randy Dunlap, Johannes Berg,
Richard Weinberger, linux-um, Daniel Vetter, Helge Deller,
linux-fbdev, dri-devel, Andres Salomon, linux-geode, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 71c53e19226b0166ba387d3c590d0509f541a0a1 ]
The geode fbdev driver uses struct cpuinfo fields that are not present
on ARCH=um, so don't allow this driver to be built on UML.
Prevents these build errors:
In file included from ../arch/x86/include/asm/olpc.h:7:0,
from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:39: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
(boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
(boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:39: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
(boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
(boot_cpu_data.x86_model == 10));
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Andres Salomon <dilinger@queued.net>
Cc: linux-geode@lists.infradead.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/geode/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/geode/Kconfig b/drivers/video/fbdev/geode/Kconfig
index ac9c860592aa..85bc14b6faf6 100644
--- a/drivers/video/fbdev/geode/Kconfig
+++ b/drivers/video/fbdev/geode/Kconfig
@@ -5,6 +5,7 @@
config FB_GEODE
bool "AMD Geode family framebuffer support"
depends on FB && PCI && (X86_32 || (X86 && COMPILE_TEST))
+ depends on !UML
help
Say 'Y' here to allow you to select framebuffer drivers for
the AMD Geode family of processors.
--
2.35.1
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 509/731] fbdev: uvesafb: dont build on UML
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 001/731] drm/amd/display: Manually adjust strobe for DCN303 Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 003/731] arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins Greg Kroah-Hartman
` (739 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Randy Dunlap, Johannes Berg,
Richard Weinberger, linux-um, Daniel Vetter, Helge Deller,
linux-fbdev, dri-devel, Michal Januszewski, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 35b4f4d4a725cf8f8c10649163cd12aed509b953 ]
The uvesafb fbdev driver uses memory management information that is not
available on ARCH=um, so don't allow this driver to be built on UML.
Prevents these build errors:
../drivers/video/fbdev/uvesafb.c: In function ‘uvesafb_vbe_init’:
../drivers/video/fbdev/uvesafb.c:807:21: error: ‘__supported_pte_mask’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
../drivers/video/fbdev/uvesafb.c:807:44: error: ‘_PAGE_NX’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 5050a9f8e879..26531aa19428 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -606,6 +606,7 @@ config FB_TGA
config FB_UVESA
tristate "Userspace VESA VGA graphics support"
depends on FB && CONNECTOR
+ depends on !UML
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 509/731] fbdev: uvesafb: dont build on UML
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
0 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Sasha Levin, linux-fbdev, Greg Kroah-Hartman, Helge Deller,
Randy Dunlap, linux-um, patches, dri-devel, Michal Januszewski,
Richard Weinberger, Johannes Berg
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 35b4f4d4a725cf8f8c10649163cd12aed509b953 ]
The uvesafb fbdev driver uses memory management information that is not
available on ARCH=um, so don't allow this driver to be built on UML.
Prevents these build errors:
../drivers/video/fbdev/uvesafb.c: In function ‘uvesafb_vbe_init’:
../drivers/video/fbdev/uvesafb.c:807:21: error: ‘__supported_pte_mask’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
../drivers/video/fbdev/uvesafb.c:807:44: error: ‘_PAGE_NX’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 5050a9f8e879..26531aa19428 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -606,6 +606,7 @@ config FB_TGA
config FB_UVESA
tristate "Userspace VESA VGA graphics support"
depends on FB && CONNECTOR
+ depends on !UML
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 509/731] fbdev: uvesafb: dont build on UML
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
0 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Randy Dunlap, Johannes Berg,
Richard Weinberger, linux-um, Daniel Vetter, Helge Deller,
linux-fbdev, dri-devel, Michal Januszewski, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 35b4f4d4a725cf8f8c10649163cd12aed509b953 ]
The uvesafb fbdev driver uses memory management information that is not
available on ARCH=um, so don't allow this driver to be built on UML.
Prevents these build errors:
../drivers/video/fbdev/uvesafb.c: In function ‘uvesafb_vbe_init’:
../drivers/video/fbdev/uvesafb.c:807:21: error: ‘__supported_pte_mask’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
../drivers/video/fbdev/uvesafb.c:807:44: error: ‘_PAGE_NX’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 5050a9f8e879..26531aa19428 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -606,6 +606,7 @@ config FB_TGA
config FB_UVESA
tristate "Userspace VESA VGA graphics support"
depends on FB && CONNECTOR
+ depends on !UML
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
--
2.35.1
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 510/731] fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (508 preceding siblings ...)
2022-12-28 14:40 ` Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 511/731] HSI: omap_ssi_core: fix unbalanced pm_runtime_disable() Greg Kroah-Hartman
` (231 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christophe JAILLET, Helge Deller,
Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit a94371040712031ba129c7e9d8ff04a06a2f8207 ]
If an error occurs after a successful uvesafb_init_mtrr() call, it must be
undone by a corresponding arch_phys_wc_del() call, as already done in the
remove function.
This has been added in the remove function in commit 63e28a7a5ffc
("uvesafb: Clean up MTRR code")
Fixes: 8bdb3a2d7df4 ("uvesafb: the driver core")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/uvesafb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/uvesafb.c b/drivers/video/fbdev/uvesafb.c
index 4df6772802d7..1f3b7e013568 100644
--- a/drivers/video/fbdev/uvesafb.c
+++ b/drivers/video/fbdev/uvesafb.c
@@ -1758,6 +1758,7 @@ static int uvesafb_probe(struct platform_device *dev)
out_unmap:
iounmap(info->screen_base);
out_mem:
+ arch_phys_wc_del(par->mtrr_handle);
release_mem_region(info->fix.smem_start, info->fix.smem_len);
out_reg:
release_region(0x3c0, 32);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 511/731] HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (509 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 510/731] fbdev: uvesafb: Fixes an error handling path in uvesafb_probe() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 512/731] HSI: omap_ssi_core: fix possible memory leak in ssi_probe() Greg Kroah-Hartman
` (230 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Sebastian Reichel,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit f5181c35ed7ba0ceb6e42872aad1334d994b0175 ]
In error label 'out1' path in ssi_probe(), the pm_runtime_enable()
has not been called yet, so pm_runtime_disable() is not needed.
Fixes: b209e047bc74 ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hsi/controllers/omap_ssi_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hsi/controllers/omap_ssi_core.c b/drivers/hsi/controllers/omap_ssi_core.c
index eb9820158318..b23a576ed88a 100644
--- a/drivers/hsi/controllers/omap_ssi_core.c
+++ b/drivers/hsi/controllers/omap_ssi_core.c
@@ -536,9 +536,9 @@ static int ssi_probe(struct platform_device *pd)
device_for_each_child(&pd->dev, NULL, ssi_remove_ports);
out2:
ssi_remove_controller(ssi);
+ pm_runtime_disable(&pd->dev);
out1:
platform_set_drvdata(pd, NULL);
- pm_runtime_disable(&pd->dev);
return err;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 512/731] HSI: omap_ssi_core: fix possible memory leak in ssi_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (510 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 511/731] HSI: omap_ssi_core: fix unbalanced pm_runtime_disable() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 513/731] power: supply: fix residue sysfs file in error handle route of __power_supply_register() Greg Kroah-Hartman
` (229 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Sebastian Reichel,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 1aff514e1d2bd47854dbbdf867970b9d463d4c57 ]
If ssi_add_controller() returns error, it should call hsi_put_controller()
to give up the reference that was set in hsi_alloc_controller(), so that
it can call hsi_controller_release() to free controller and ports that
allocated in hsi_alloc_controller().
Fixes: b209e047bc74 ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hsi/controllers/omap_ssi_core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/hsi/controllers/omap_ssi_core.c b/drivers/hsi/controllers/omap_ssi_core.c
index b23a576ed88a..052cf3e92dd6 100644
--- a/drivers/hsi/controllers/omap_ssi_core.c
+++ b/drivers/hsi/controllers/omap_ssi_core.c
@@ -502,8 +502,10 @@ static int ssi_probe(struct platform_device *pd)
platform_set_drvdata(pd, ssi);
err = ssi_add_controller(ssi, pd);
- if (err < 0)
+ if (err < 0) {
+ hsi_put_controller(ssi);
goto out1;
+ }
pm_runtime_enable(&pd->dev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 513/731] power: supply: fix residue sysfs file in error handle route of __power_supply_register()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (511 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 512/731] HSI: omap_ssi_core: fix possible memory leak in ssi_probe() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 514/731] perf trace: Return error if a system call doesnt exist Greg Kroah-Hartman
` (228 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zeng Heng, Sebastian Reichel, Sasha Levin
From: Zeng Heng <zengheng4@huawei.com>
[ Upstream commit 5b79480ce1978864ac3f06f2134dfa3b6691fe74 ]
If device_add() succeeds, we should call device_del() when want to
get rid of it, so move it into proper jump symbol.
Otherwise, when __power_supply_register() returns fail and goto
wakeup_init_failed to exit, there is still residue device file in sysfs.
When attempt to probe device again, sysfs would complain as below:
sysfs: cannot create duplicate filename '/devices/platform/i2c/i2c-0/0-001c/power_supply/adp5061'
Call Trace:
dump_stack_lvl+0x68/0x85
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x1b1/0x1d0
kobject_add_internal+0x143/0x390
kobject_add+0x108/0x170
Fixes: 80c6463e2fa3 ("power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/power/supply/power_supply_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
index a6e9afa5a1cf..c3af54421840 100644
--- a/drivers/power/supply/power_supply_core.c
+++ b/drivers/power/supply/power_supply_core.c
@@ -1220,8 +1220,8 @@ __power_supply_register(struct device *parent,
register_cooler_failed:
psy_unregister_thermal(psy);
register_thermal_failed:
- device_del(dev);
wakeup_init_failed:
+ device_del(dev);
device_add_failed:
check_supplies_failed:
dev_set_name_failed:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 514/731] perf trace: Return error if a system call doesnt exist
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (512 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 513/731] power: supply: fix residue sysfs file in error handle route of __power_supply_register() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 515/731] perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number Greg Kroah-Hartman
` (227 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Leo Yan, Ian Rogers,
Alexander Shishkin, bpf, Ingo Molnar, Jiri Olsa, Mark Rutland,
Namhyung Kim, Peter Zijlstra, Arnaldo Carvalho de Melo,
Sasha Levin
From: Leo Yan <leo.yan@linaro.org>
[ Upstream commit d4223e1776c30b2ce8d0e6eaadcbf696e60fca3c ]
When a system call is not detected, the reason is either because the
system call ID is out of scope or failure to find the corresponding path
in the sysfs, trace__read_syscall_info() returns zero. Finally, without
returning an error value it introduces confusion for the caller.
This patch lets the function trace__read_syscall_info() to return
-EEXIST when a system call doesn't exist.
Fixes: b8b1033fcaa091d8 ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/builtin-trace.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 2bf21194c7b3..aaa465d7f011 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -1782,11 +1782,11 @@ static int trace__read_syscall_info(struct trace *trace, int id)
#endif
sc = trace->syscalls.table + id;
if (sc->nonexistent)
- return 0;
+ return -EEXIST;
if (name == NULL) {
sc->nonexistent = true;
- return 0;
+ return -EEXIST;
}
sc->name = name;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 515/731] perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (513 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 514/731] perf trace: Return error if a system call doesnt exist Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 516/731] perf trace: Handle failure when trace point folder is missed Greg Kroah-Hartman
` (226 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Leo Yan, Ian Rogers,
Alexander Shishkin, Ingo Molnar, Jiri Olsa, Mark Rutland,
Namhyung Kim, Peter Zijlstra, bpf, Arnaldo Carvalho de Melo,
Sasha Levin
From: Leo Yan <leo.yan@linaro.org>
[ Upstream commit eadcab4c7a66e1df03d32da0db55d89fd9343fcc ]
This patch defines a macro RAW_SYSCALL_ARGS_NUM to replace the open
coded number '6'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221121075237.127706-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 03e9a5d8eb55 ("perf trace: Handle failure when trace point folder is missed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/builtin-trace.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index aaa465d7f011..c1db48ff01a5 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -87,6 +87,8 @@
# define F_LINUX_SPECIFIC_BASE 1024
#endif
+#define RAW_SYSCALL_ARGS_NUM 6
+
/*
* strtoul: Go from a string to a value, i.e. for msr: MSR_FS_BASE to 0xc0000100
*/
@@ -107,7 +109,7 @@ struct syscall_fmt {
const char *sys_enter,
*sys_exit;
} bpf_prog_name;
- struct syscall_arg_fmt arg[6];
+ struct syscall_arg_fmt arg[RAW_SYSCALL_ARGS_NUM];
u8 nr_args;
bool errpid;
bool timeout;
@@ -1224,7 +1226,7 @@ struct syscall {
*/
struct bpf_map_syscall_entry {
bool enabled;
- u16 string_args_len[6];
+ u16 string_args_len[RAW_SYSCALL_ARGS_NUM];
};
/*
@@ -1649,7 +1651,7 @@ static int syscall__alloc_arg_fmts(struct syscall *sc, int nr_args)
{
int idx;
- if (nr_args == 6 && sc->fmt && sc->fmt->nr_args != 0)
+ if (nr_args == RAW_SYSCALL_ARGS_NUM && sc->fmt && sc->fmt->nr_args != 0)
nr_args = sc->fmt->nr_args;
sc->arg_fmt = calloc(nr_args, sizeof(*sc->arg_fmt));
@@ -1800,7 +1802,8 @@ static int trace__read_syscall_info(struct trace *trace, int id)
sc->tp_format = trace_event__tp_format("syscalls", tp_name);
}
- if (syscall__alloc_arg_fmts(sc, IS_ERR(sc->tp_format) ? 6 : sc->tp_format->format.nr_fields))
+ if (syscall__alloc_arg_fmts(sc, IS_ERR(sc->tp_format) ?
+ RAW_SYSCALL_ARGS_NUM : sc->tp_format->format.nr_fields))
return -ENOMEM;
if (IS_ERR(sc->tp_format))
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 516/731] perf trace: Handle failure when trace point folder is missed
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (514 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 515/731] perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 517/731] perf symbol: correction while adjusting symbol Greg Kroah-Hartman
` (225 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Leo Yan, Ian Rogers,
Alexander Shishkin, bpf, Ingo Molnar, Jiri Olsa, Mark Rutland,
Namhyung Kim, Peter Zijlstra, Arnaldo Carvalho de Melo,
Sasha Levin
From: Leo Yan <leo.yan@linaro.org>
[ Upstream commit 03e9a5d8eb552a1bf692a9c8a5ecd50f4e428006 ]
On Arm64 a case is perf tools fails to find the corresponding trace
point folder for system calls listed in the table 'syscalltbl_arm64',
e.g. the generated system call table contains "lookup_dcookie" but we
cannot find out the matched trace point folder for it.
We need to figure out if there have any issue for the generated system
call table, on the other hand, we need to handle the case when trace
point folder is missed under sysfs, this patch sets the flag
syscall::nonexistent as true and returns the error from
trace__read_syscall_info().
Another problem is for trace__syscall_info(), it returns two different
values if a system call doesn't exist: at the first time calling
trace__syscall_info() it returns NULL when the system call doesn't exist,
later if call trace__syscall_info() again for the same missed system
call, it returns pointer of syscall. trace__syscall_info() checks the
condition 'syscalls.table[id].name == NULL', but the name will be
assigned in the first invoking even the system call is not found.
So checking system call's name in trace__syscall_info() is not the right
thing to do, this patch simply checks flag syscall::nonexistent to make
decision if a system call exists or not, finally trace__syscall_info()
returns the consistent result (NULL) if a system call doesn't existed.
Fixes: b8b1033fcaa091d8 ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/builtin-trace.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index c1db48ff01a5..2fea9952818f 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -1802,13 +1802,19 @@ static int trace__read_syscall_info(struct trace *trace, int id)
sc->tp_format = trace_event__tp_format("syscalls", tp_name);
}
+ /*
+ * Fails to read trace point format via sysfs node, so the trace point
+ * doesn't exist. Set the 'nonexistent' flag as true.
+ */
+ if (IS_ERR(sc->tp_format)) {
+ sc->nonexistent = true;
+ return PTR_ERR(sc->tp_format);
+ }
+
if (syscall__alloc_arg_fmts(sc, IS_ERR(sc->tp_format) ?
RAW_SYSCALL_ARGS_NUM : sc->tp_format->format.nr_fields))
return -ENOMEM;
- if (IS_ERR(sc->tp_format))
- return PTR_ERR(sc->tp_format);
-
sc->args = sc->tp_format->format.fields;
/*
* We need to check and discard the first variable '__syscall_nr'
@@ -2125,11 +2131,8 @@ static struct syscall *trace__syscall_info(struct trace *trace,
(err = trace__read_syscall_info(trace, id)) != 0)
goto out_cant_read;
- if (trace->syscalls.table[id].name == NULL) {
- if (trace->syscalls.table[id].nonexistent)
- return NULL;
+ if (trace->syscalls.table && trace->syscalls.table[id].nonexistent)
goto out_cant_read;
- }
return &trace->syscalls.table[id];
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 517/731] perf symbol: correction while adjusting symbol
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (515 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 516/731] perf trace: Handle failure when trace point folder is missed Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 518/731] power: supply: z2_battery: Fix possible memleak in z2_batt_probe() Greg Kroah-Hartman
` (224 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ajay Kaher, Alexander Shishkin,
Alexey Makhalov, Jiri Olsa, Leo Yan, Mark Rutland, Namhyung Kim,
Peter Zijlstra, Srivatsa S. Bhat, Steven Rostedt (VMware),
Vasavi Sirnapalli, Arnaldo Carvalho de Melo, Sasha Levin
From: Ajay Kaher <akaher@vmware.com>
[ Upstream commit 6f520ce17920b3cdfbd2479b3ccf27f9706219d0 ]
perf doesn't provide proper symbol information for specially crafted
.debug files.
Sometimes .debug file may not have similar program header as runtime
ELF file. For example if we generate .debug file using objcopy
--only-keep-debug resulting file will not contain .text, .data and
other runtime sections. That means corresponding program headers will
have zero FileSiz and modified Offset.
Example: program header of text section of libxxx.so:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x00000000003d3000 0x00000000003d3000 0x00000000003d3000
0x000000000055ae80 0x000000000055ae80 R E 0x1000
Same program header after executing:
objcopy --only-keep-debug libxxx.so libxxx.so.debug
LOAD 0x0000000000001000 0x00000000003d3000 0x00000000003d3000
0x0000000000000000 0x000000000055ae80 R E 0x1000
Offset and FileSiz have been changed.
Following formula will not provide correct value, if program header
taken from .debug file (syms_ss):
sym.st_value -= phdr.p_vaddr - phdr.p_offset;
Correct program header information is located inside runtime ELF
file (runtime_ss).
Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols")
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsab@vmware.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Vasavi Sirnapalli <vsirnapalli@vmware.com>
Link: http://lore.kernel.org/lkml/1669198696-50547-1-git-send-email-akaher@vmware.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/util/symbol-elf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 6c183df191aa..fd42f768e584 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -1292,7 +1292,7 @@ dso__load_sym_internal(struct dso *dso, struct map *map, struct symsrc *syms_ss,
(!used_opd && syms_ss->adjust_symbols)) {
GElf_Phdr phdr;
- if (elf_read_program_header(syms_ss->elf,
+ if (elf_read_program_header(runtime_ss->elf,
(u64)sym.st_value, &phdr)) {
pr_debug4("%s: failed to find program header for "
"symbol: %s st_value: %#" PRIx64 "\n",
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 518/731] power: supply: z2_battery: Fix possible memleak in z2_batt_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (516 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 517/731] perf symbol: correction while adjusting symbol Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 519/731] HSI: omap_ssi_core: Fix error handling in ssi_init() Greg Kroah-Hartman
` (223 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Qilong, Linus Walleij,
Sebastian Reichel, Sasha Levin
From: Zhang Qilong <zhangqilong3@huawei.com>
[ Upstream commit 955bee204f3dd307642c101b75e370662987e735 ]
If devm_gpiod_get_optional() returns error, the charger should be
freed before z2_batt_probe returns according to the context. We
fix it by just gotoing to 'err' branch.
Fixes: a3b4388ea19b ("power: supply: z2_battery: Convert to GPIO descriptors")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/power/supply/z2_battery.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/power/supply/z2_battery.c b/drivers/power/supply/z2_battery.c
index 7ed4e4bb26ec..fd33cdf9cf12 100644
--- a/drivers/power/supply/z2_battery.c
+++ b/drivers/power/supply/z2_battery.c
@@ -206,10 +206,12 @@ static int z2_batt_probe(struct i2c_client *client,
charger->charge_gpiod = devm_gpiod_get_optional(&client->dev,
NULL, GPIOD_IN);
- if (IS_ERR(charger->charge_gpiod))
- return dev_err_probe(&client->dev,
+ if (IS_ERR(charger->charge_gpiod)) {
+ ret = dev_err_probe(&client->dev,
PTR_ERR(charger->charge_gpiod),
"failed to get charge GPIO\n");
+ goto err;
+ }
if (charger->charge_gpiod) {
gpiod_set_consumer_name(charger->charge_gpiod, "BATT CHRG");
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 519/731] HSI: omap_ssi_core: Fix error handling in ssi_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (517 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 518/731] power: supply: z2_battery: Fix possible memleak in z2_batt_probe() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 520/731] power: supply: ab8500: Fix error handling in ab8500_charger_init() Greg Kroah-Hartman
` (222 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Sebastian Reichel, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 3ffa9f713c39a213a08d9ff13ab983a8aa5d8b5d ]
The ssi_init() returns the platform_driver_register() directly without
checking its return value, if platform_driver_register() failed, the
ssi_pdriver is not unregistered.
Fix by unregister ssi_pdriver when the last platform_driver_register()
failed.
Fixes: 0fae198988b8 ("HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hsi/controllers/omap_ssi_core.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/hsi/controllers/omap_ssi_core.c b/drivers/hsi/controllers/omap_ssi_core.c
index 052cf3e92dd6..26f2c3c01297 100644
--- a/drivers/hsi/controllers/omap_ssi_core.c
+++ b/drivers/hsi/controllers/omap_ssi_core.c
@@ -631,7 +631,13 @@ static int __init ssi_init(void) {
if (ret)
return ret;
- return platform_driver_register(&ssi_port_pdriver);
+ ret = platform_driver_register(&ssi_port_pdriver);
+ if (ret) {
+ platform_driver_unregister(&ssi_pdriver);
+ return ret;
+ }
+
+ return 0;
}
module_init(ssi_init);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 520/731] power: supply: ab8500: Fix error handling in ab8500_charger_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (518 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 519/731] HSI: omap_ssi_core: Fix error handling in ssi_init() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 521/731] power: supply: fix null pointer dereferencing in power_supply_get_battery_info Greg Kroah-Hartman
` (221 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Sebastian Reichel, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit c4d33381b134da188ccd1084aef21e2b8c3c422e ]
The ab8500_charger_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
all ab8500_charger_component_drivers are not unregistered.
Fix by unregister ab8500_charger_component_drivers when
platform_driver_register() failed.
Fixes: 1c1f13a006ed ("power: supply: ab8500: Move to componentized binding")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/power/supply/ab8500_charger.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index 15eadaf46f14..a4f766fc7c9d 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -3726,7 +3726,14 @@ static int __init ab8500_charger_init(void)
if (ret)
return ret;
- return platform_driver_register(&ab8500_charger_driver);
+ ret = platform_driver_register(&ab8500_charger_driver);
+ if (ret) {
+ platform_unregister_drivers(ab8500_charger_component_drivers,
+ ARRAY_SIZE(ab8500_charger_component_drivers));
+ return ret;
+ }
+
+ return 0;
}
static void __exit ab8500_charger_exit(void)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 521/731] power: supply: fix null pointer dereferencing in power_supply_get_battery_info
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (519 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 520/731] power: supply: ab8500: Fix error handling in ab8500_charger_init() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 522/731] perf stat: Refactor __run_perf_stat() common code Greg Kroah-Hartman
` (220 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, ruanjinjie, Baolin Wang,
Sebastian Reichel, Sasha Levin
From: ruanjinjie <ruanjinjie@huawei.com>
[ Upstream commit 104bb8a663451404a26331263ce5b96c34504049 ]
when kmalloc() fail to allocate memory in kasprintf(), propname
will be NULL, strcmp() called by of_get_property() will cause
null pointer dereference.
So return ENOMEM if kasprintf() return NULL pointer.
Fixes: 3afb50d7125b ("power: supply: core: Add some helpers to use the battery OCV capacity table")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/power/supply/power_supply_core.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
index c3af54421840..3f9c60c5b250 100644
--- a/drivers/power/supply/power_supply_core.c
+++ b/drivers/power/supply/power_supply_core.c
@@ -696,6 +696,11 @@ int power_supply_get_battery_info(struct power_supply *psy,
int i, tab_len, size;
propname = kasprintf(GFP_KERNEL, "ocv-capacity-table-%d", index);
+ if (!propname) {
+ power_supply_put_battery_info(psy, info);
+ err = -ENOMEM;
+ goto out_put_node;
+ }
list = of_get_property(battery_np, propname, &size);
if (!list || !size) {
dev_err(&psy->dev, "failed to get %s\n", propname);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 522/731] perf stat: Refactor __run_perf_stat() common code
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (520 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 521/731] power: supply: fix null pointer dereferencing in power_supply_get_battery_info Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 523/731] perf stat: Do not delay the workload with --delay Greg Kroah-Hartman
` (219 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Leo Yan, Adrián Herrera Arcila,
Alexander Shishkin, Ingo Molnar, James Clark, Jiri Olsa,
Mark Rutland, Namhyung Kim, Peter Zijlstra, Song Liu,
Arnaldo Carvalho de Melo, Sasha Levin
From: Adrián Herrera Arcila <adrian.herrera@arm.com>
[ Upstream commit bb8bc52e75785af94b9ba079277547d50d018a52 ]
This extracts common code from the branches of the forks if-then-else.
enable_counters(), which was at the beginning of both branches of the
conditional, is now unconditional; evlist__start_workload() is extracted
to a different if, which enables making the common clocking code
unconditional.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Adrián Herrera Arcila <adrian.herrera@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20220729161244.10522-1-adrian.herrera@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: c587e77e100f ("perf stat: Do not delay the workload with --delay")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/builtin-stat.c | 25 +++++++++----------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index abf88a1ad455..2602c750779d 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -953,18 +953,18 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
return err;
}
- /*
- * Enable counters and exec the command:
- */
- if (forks) {
- err = enable_counters();
- if (err)
- return -1;
+ err = enable_counters();
+ if (err)
+ return -1;
+
+ /* Exec the command, if any */
+ if (forks)
evlist__start_workload(evsel_list);
- t0 = rdclock();
- clock_gettime(CLOCK_MONOTONIC, &ref_time);
+ t0 = rdclock();
+ clock_gettime(CLOCK_MONOTONIC, &ref_time);
+ if (forks) {
if (interval || timeout || evlist__ctlfd_initialized(evsel_list))
status = dispatch_events(forks, timeout, interval, ×);
if (child_pid != -1) {
@@ -982,13 +982,6 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
if (WIFSIGNALED(status))
psignal(WTERMSIG(status), argv[0]);
} else {
- err = enable_counters();
- if (err)
- return -1;
-
- t0 = rdclock();
- clock_gettime(CLOCK_MONOTONIC, &ref_time);
-
status = dispatch_events(forks, timeout, interval, ×);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 523/731] perf stat: Do not delay the workload with --delay
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (521 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 522/731] perf stat: Refactor __run_perf_stat() common code Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 524/731] RDMA/siw: Fix pointer cast warning Greg Kroah-Hartman
` (218 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kevin Nomura, Namhyung Kim,
Thomas Richter, Adrian Hunter, Ian Rogers, Ingo Molnar,
Jiri Olsa, Peter Zijlstra, Sumanth Korikkar,
Arnaldo Carvalho de Melo, Sasha Levin
From: Namhyung Kim <namhyung@kernel.org>
[ Upstream commit c587e77e100fa40eb6af10e00497c67acf493f33 ]
The -D/--delay option is to delay the measure after the program starts.
But the current code goes to sleep before starting the program so the
program is delayed too. This is not the intention, let's fix it.
Before:
$ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
Events disabled
Events enabled
Performance counter stats for 'system wide':
4,326,949,337 cycles
4.007494118 seconds time elapsed
real 0m7.474s
user 0m0.356s
sys 0m0.120s
It ran the workload for 4 seconds and gave the 3 second delay. So it
should skip the first 3 second and measure the last 1 second only. But
as you can see, it delays 3 seconds and ran the workload after that for
4 seconds. So the total time (real) was 7 seconds.
After:
$ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
Events disabled
Events enabled
Performance counter stats for 'system wide':
1,063,551,013 cycles
1.002769510 seconds time elapsed
real 0m4.484s
user 0m0.385s
sys 0m0.086s
The bug was introduced when it changed enablement of system-wide events
with a command line workload. But it should've considered the initial
delay case. The code was reworked since then (in bb8bc52e7578) so I'm
afraid it won't be applied cleanly.
Fixes: d0a0a511493d2695 ("perf stat: Fix forked applications enablement of counters")
Reported-by: Kevin Nomura <nomurak@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lore.kernel.org/r/20221212230820.901382-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/builtin-stat.c | 33 +++++++++++++++++----------------
1 file changed, 17 insertions(+), 16 deletions(-)
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 2602c750779d..aad65c95c371 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -558,26 +558,14 @@ static int enable_counters(void)
return err;
}
- if (stat_config.initial_delay < 0) {
- pr_info(EVLIST_DISABLED_MSG);
- return 0;
- }
-
- if (stat_config.initial_delay > 0) {
- pr_info(EVLIST_DISABLED_MSG);
- usleep(stat_config.initial_delay * USEC_PER_MSEC);
- }
-
/*
* We need to enable counters only if:
* - we don't have tracee (attaching to task or cpu)
* - we have initial delay configured
*/
- if (!target__none(&target) || stat_config.initial_delay) {
+ if (!target__none(&target)) {
if (!all_counters_use_bpf)
evlist__enable(evsel_list);
- if (stat_config.initial_delay > 0)
- pr_info(EVLIST_ENABLED_MSG);
}
return 0;
}
@@ -953,14 +941,27 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
return err;
}
- err = enable_counters();
- if (err)
- return -1;
+ if (stat_config.initial_delay) {
+ pr_info(EVLIST_DISABLED_MSG);
+ } else {
+ err = enable_counters();
+ if (err)
+ return -1;
+ }
/* Exec the command, if any */
if (forks)
evlist__start_workload(evsel_list);
+ if (stat_config.initial_delay > 0) {
+ usleep(stat_config.initial_delay * USEC_PER_MSEC);
+ err = enable_counters();
+ if (err)
+ return -1;
+
+ pr_info(EVLIST_ENABLED_MSG);
+ }
+
t0 = rdclock();
clock_gettime(CLOCK_MONOTONIC, &ref_time);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 524/731] RDMA/siw: Fix pointer cast warning
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (522 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 523/731] perf stat: Do not delay the workload with --delay Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 525/731] fs/ntfs3: Avoid UBSAN error on true_sectors_per_clst() Greg Kroah-Hartman
` (217 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Bernard Metzler,
Linus Walleij, Jason Gunthorpe, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 5244ca88671a1981ceec09c5c8809f003e6a62aa ]
The previous build fix left a remaining issue in configurations with
64-bit dma_addr_t on 32-bit architectures:
drivers/infiniband/sw/siw/siw_qp_tx.c: In function 'siw_get_pblpage':
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
32 | return virt_to_page((void *)paddr);
| ^
Use the same double cast here that the driver uses elsewhere to convert
between dma_addr_t and void*.
Fixes: 0d1b756acf60 ("RDMA/siw: Pass a pointer to virt_to_page()")
Link: https://lore.kernel.org/r/20221215170347.2612403-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/sw/siw/siw_qp_tx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/sw/siw/siw_qp_tx.c b/drivers/infiniband/sw/siw/siw_qp_tx.c
index 7d47b521070b..05052b49107f 100644
--- a/drivers/infiniband/sw/siw/siw_qp_tx.c
+++ b/drivers/infiniband/sw/siw/siw_qp_tx.c
@@ -29,7 +29,7 @@ static struct page *siw_get_pblpage(struct siw_mem *mem, u64 addr, int *idx)
dma_addr_t paddr = siw_pbl_get_buffer(pbl, offset, NULL, idx);
if (paddr)
- return virt_to_page((void *)paddr);
+ return virt_to_page((void *)(uintptr_t)paddr);
return NULL;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 525/731] fs/ntfs3: Avoid UBSAN error on true_sectors_per_clst()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (523 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 524/731] RDMA/siw: Fix pointer cast warning Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 526/731] overflow: Implement size_t saturating arithmetic helpers Greg Kroah-Hartman
` (216 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Author: Randy Dunlap,
syzbot+35b87c668935bb55e666, Shigeru Yoshida, Konstantin Komarov,
Sasha Levin
From: Shigeru Yoshida <syoshida@redhat.com>
[ Upstream commit caad9dd8792a2622737b7273cb34835fd9536cd2 ]
syzbot reported UBSAN error as below:
[ 76.901829][ T6677] ================================================================================
[ 76.903908][ T6677] UBSAN: shift-out-of-bounds in fs/ntfs3/super.c:675:13
[ 76.905363][ T6677] shift exponent -247 is negative
This patch avoid this error.
Link: https://syzkaller.appspot.com/bug?id=b0299c09a14aababf0f1c862dd4ebc8ab9eb0179
Fixes: a3b774342fa7 (fs/ntfs3: validate BOOT sectors_per_clusters)
Cc: Author: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+35b87c668935bb55e666@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ntfs3/super.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c
index f3b88c7e35f7..39b09f32f4db 100644
--- a/fs/ntfs3/super.c
+++ b/fs/ntfs3/super.c
@@ -672,7 +672,7 @@ static u32 true_sectors_per_clst(const struct NTFS_BOOT *boot)
if (boot->sectors_per_clusters <= 0x80)
return boot->sectors_per_clusters;
if (boot->sectors_per_clusters >= 0xf4) /* limit shift to 2MB max */
- return 1U << (0 - boot->sectors_per_clusters);
+ return 1U << -(s8)boot->sectors_per_clusters;
return -EINVAL;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 526/731] overflow: Implement size_t saturating arithmetic helpers
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (524 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 525/731] fs/ntfs3: Avoid UBSAN error on true_sectors_per_clst() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 527/731] fs/ntfs3: Harden against integer overflows Greg Kroah-Hartman
` (215 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rasmus Villemoes,
Gustavo A. R. Silva, Nathan Chancellor, Jason Gunthorpe,
Nick Desaulniers, Leon Romanovsky, Keith Busch, Len Baker,
Kees Cook, Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit e1be43d9b5d0d1310dbd90185a8e5c7145dde40f ]
In order to perform more open-coded replacements of common allocation
size arithmetic, the kernel needs saturating (SIZE_MAX) helpers for
multiplication, addition, and subtraction. For example, it is common in
allocators, especially on realloc, to add to an existing size:
p = krealloc(map->patch,
sizeof(struct reg_sequence) * (map->patch_regs + num_regs),
GFP_KERNEL);
There is no existing saturating replacement for this calculation, and
just leaving the addition open coded inside array_size() could
potentially overflow as well. For example, an overflow in an expression
for a size_t argument might wrap to zero:
array_size(anything, something_at_size_max + 1) == 0
Introduce size_mul(), size_add(), and size_sub() helpers that
implicitly promote arguments to size_t and saturated calculations for
use in allocations. With these helpers it is also possible to redefine
array_size(), array3_size(), flex_array_size(), and struct_size() in
terms of the new helpers.
As with the check_*_overflow() helpers, the new helpers use __must_check,
though what is really desired is a way to make sure that assignment is
only to a size_t lvalue. Without this, it's still possible to introduce
overflow/underflow via type conversion (i.e. from size_t to int).
Enforcing this will currently need to be left to static analysis or
future use of -Wconversion.
Additionally update the overflow unit tests to force runtime evaluation
for the pathological cases.
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Len Baker <len.baker@gmx.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Stable-dep-of: e001e6086939 ("fs/ntfs3: Harden against integer overflows")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/process/deprecated.rst | 20 ++++-
include/linux/overflow.h | 110 +++++++++++++++++----------
lib/test_overflow.c | 98 ++++++++++++++++++++++++
3 files changed, 184 insertions(+), 44 deletions(-)
diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst
index 8ced754a5a0f..f3484f60eae5 100644
--- a/Documentation/process/deprecated.rst
+++ b/Documentation/process/deprecated.rst
@@ -70,6 +70,9 @@ Instead, the 2-factor form of the allocator should be used::
foo = kmalloc_array(count, size, GFP_KERNEL);
+Specifically, kmalloc() can be replaced with kmalloc_array(), and
+kzalloc() can be replaced with kcalloc().
+
If no 2-factor form is available, the saturate-on-overflow helpers should
be used::
@@ -90,9 +93,20 @@ Instead, use the helper::
array usage and switch to a `flexible array member
<#zero-length-and-one-element-arrays>`_ instead.
-See array_size(), array3_size(), and struct_size(),
-for more details as well as the related check_add_overflow() and
-check_mul_overflow() family of functions.
+For other calculations, please compose the use of the size_mul(),
+size_add(), and size_sub() helpers. For example, in the case of::
+
+ foo = krealloc(current_size + chunk_size * (count - 3), GFP_KERNEL);
+
+Instead, use the helpers::
+
+ foo = krealloc(size_add(current_size,
+ size_mul(chunk_size,
+ size_sub(count, 3))), GFP_KERNEL);
+
+For more details, also see array3_size() and flex_array_size(),
+as well as the related check_mul_overflow(), check_add_overflow(),
+check_sub_overflow(), and check_shl_overflow() family of functions.
simple_strtol(), simple_strtoll(), simple_strtoul(), simple_strtoull()
----------------------------------------------------------------------
diff --git a/include/linux/overflow.h b/include/linux/overflow.h
index 4669632bd72b..59d7228104d0 100644
--- a/include/linux/overflow.h
+++ b/include/linux/overflow.h
@@ -118,81 +118,94 @@ static inline bool __must_check __must_check_overflow(bool overflow)
}))
/**
- * array_size() - Calculate size of 2-dimensional array.
- *
- * @a: dimension one
- * @b: dimension two
+ * size_mul() - Calculate size_t multiplication with saturation at SIZE_MAX
*
- * Calculates size of 2-dimensional array: @a * @b.
+ * @factor1: first factor
+ * @factor2: second factor
*
- * Returns: number of bytes needed to represent the array or SIZE_MAX on
- * overflow.
+ * Returns: calculate @factor1 * @factor2, both promoted to size_t,
+ * with any overflow causing the return value to be SIZE_MAX. The
+ * lvalue must be size_t to avoid implicit type conversion.
*/
-static inline __must_check size_t array_size(size_t a, size_t b)
+static inline size_t __must_check size_mul(size_t factor1, size_t factor2)
{
size_t bytes;
- if (check_mul_overflow(a, b, &bytes))
+ if (check_mul_overflow(factor1, factor2, &bytes))
return SIZE_MAX;
return bytes;
}
/**
- * array3_size() - Calculate size of 3-dimensional array.
+ * size_add() - Calculate size_t addition with saturation at SIZE_MAX
*
- * @a: dimension one
- * @b: dimension two
- * @c: dimension three
- *
- * Calculates size of 3-dimensional array: @a * @b * @c.
+ * @addend1: first addend
+ * @addend2: second addend
*
- * Returns: number of bytes needed to represent the array or SIZE_MAX on
- * overflow.
+ * Returns: calculate @addend1 + @addend2, both promoted to size_t,
+ * with any overflow causing the return value to be SIZE_MAX. The
+ * lvalue must be size_t to avoid implicit type conversion.
*/
-static inline __must_check size_t array3_size(size_t a, size_t b, size_t c)
+static inline size_t __must_check size_add(size_t addend1, size_t addend2)
{
size_t bytes;
- if (check_mul_overflow(a, b, &bytes))
- return SIZE_MAX;
- if (check_mul_overflow(bytes, c, &bytes))
+ if (check_add_overflow(addend1, addend2, &bytes))
return SIZE_MAX;
return bytes;
}
-/*
- * Compute a*b+c, returning SIZE_MAX on overflow. Internal helper for
- * struct_size() below.
+/**
+ * size_sub() - Calculate size_t subtraction with saturation at SIZE_MAX
+ *
+ * @minuend: value to subtract from
+ * @subtrahend: value to subtract from @minuend
+ *
+ * Returns: calculate @minuend - @subtrahend, both promoted to size_t,
+ * with any overflow causing the return value to be SIZE_MAX. For
+ * composition with the size_add() and size_mul() helpers, neither
+ * argument may be SIZE_MAX (or the result with be forced to SIZE_MAX).
+ * The lvalue must be size_t to avoid implicit type conversion.
*/
-static inline __must_check size_t __ab_c_size(size_t a, size_t b, size_t c)
+static inline size_t __must_check size_sub(size_t minuend, size_t subtrahend)
{
size_t bytes;
- if (check_mul_overflow(a, b, &bytes))
- return SIZE_MAX;
- if (check_add_overflow(bytes, c, &bytes))
+ if (minuend == SIZE_MAX || subtrahend == SIZE_MAX ||
+ check_sub_overflow(minuend, subtrahend, &bytes))
return SIZE_MAX;
return bytes;
}
/**
- * struct_size() - Calculate size of structure with trailing array.
- * @p: Pointer to the structure.
- * @member: Name of the array member.
- * @count: Number of elements in the array.
+ * array_size() - Calculate size of 2-dimensional array.
*
- * Calculates size of memory needed for structure @p followed by an
- * array of @count number of @member elements.
+ * @a: dimension one
+ * @b: dimension two
*
- * Return: number of bytes needed or SIZE_MAX on overflow.
+ * Calculates size of 2-dimensional array: @a * @b.
+ *
+ * Returns: number of bytes needed to represent the array or SIZE_MAX on
+ * overflow.
*/
-#define struct_size(p, member, count) \
- __ab_c_size(count, \
- sizeof(*(p)->member) + __must_be_array((p)->member),\
- sizeof(*(p)))
+#define array_size(a, b) size_mul(a, b)
+
+/**
+ * array3_size() - Calculate size of 3-dimensional array.
+ *
+ * @a: dimension one
+ * @b: dimension two
+ * @c: dimension three
+ *
+ * Calculates size of 3-dimensional array: @a * @b * @c.
+ *
+ * Returns: number of bytes needed to represent the array or SIZE_MAX on
+ * overflow.
+ */
+#define array3_size(a, b, c) size_mul(size_mul(a, b), c)
/**
* flex_array_size() - Calculate size of a flexible array member
@@ -208,7 +221,22 @@ static inline __must_check size_t __ab_c_size(size_t a, size_t b, size_t c)
* Return: number of bytes needed or SIZE_MAX on overflow.
*/
#define flex_array_size(p, member, count) \
- array_size(count, \
- sizeof(*(p)->member) + __must_be_array((p)->member))
+ size_mul(count, \
+ sizeof(*(p)->member) + __must_be_array((p)->member))
+
+/**
+ * struct_size() - Calculate size of structure with trailing flexible array.
+ *
+ * @p: Pointer to the structure.
+ * @member: Name of the array member.
+ * @count: Number of elements in the array.
+ *
+ * Calculates size of memory needed for structure @p followed by an
+ * array of @count number of @member elements.
+ *
+ * Return: number of bytes needed or SIZE_MAX on overflow.
+ */
+#define struct_size(p, member, count) \
+ size_add(sizeof(*(p)), flex_array_size(p, member, count))
#endif /* __LINUX_OVERFLOW_H */
diff --git a/lib/test_overflow.c b/lib/test_overflow.c
index 7a4b6f6c5473..7a5a5738d2d2 100644
--- a/lib/test_overflow.c
+++ b/lib/test_overflow.c
@@ -588,12 +588,110 @@ static int __init test_overflow_allocation(void)
return err;
}
+struct __test_flex_array {
+ unsigned long flags;
+ size_t count;
+ unsigned long data[];
+};
+
+static int __init test_overflow_size_helpers(void)
+{
+ struct __test_flex_array *obj;
+ int count = 0;
+ int err = 0;
+ int var;
+
+#define check_one_size_helper(expected, func, args...) ({ \
+ bool __failure = false; \
+ size_t _r; \
+ \
+ _r = func(args); \
+ if (_r != (expected)) { \
+ pr_warn("expected " #func "(" #args ") " \
+ "to return %zu but got %zu instead\n", \
+ (size_t)(expected), _r); \
+ __failure = true; \
+ } \
+ count++; \
+ __failure; \
+})
+
+ var = 4;
+ err |= check_one_size_helper(20, size_mul, var++, 5);
+ err |= check_one_size_helper(20, size_mul, 4, var++);
+ err |= check_one_size_helper(0, size_mul, 0, 3);
+ err |= check_one_size_helper(0, size_mul, 3, 0);
+ err |= check_one_size_helper(6, size_mul, 2, 3);
+ err |= check_one_size_helper(SIZE_MAX, size_mul, SIZE_MAX, 1);
+ err |= check_one_size_helper(SIZE_MAX, size_mul, SIZE_MAX, 3);
+ err |= check_one_size_helper(SIZE_MAX, size_mul, SIZE_MAX, -3);
+
+ var = 4;
+ err |= check_one_size_helper(9, size_add, var++, 5);
+ err |= check_one_size_helper(9, size_add, 4, var++);
+ err |= check_one_size_helper(9, size_add, 9, 0);
+ err |= check_one_size_helper(9, size_add, 0, 9);
+ err |= check_one_size_helper(5, size_add, 2, 3);
+ err |= check_one_size_helper(SIZE_MAX, size_add, SIZE_MAX, 1);
+ err |= check_one_size_helper(SIZE_MAX, size_add, SIZE_MAX, 3);
+ err |= check_one_size_helper(SIZE_MAX, size_add, SIZE_MAX, -3);
+
+ var = 4;
+ err |= check_one_size_helper(1, size_sub, var--, 3);
+ err |= check_one_size_helper(1, size_sub, 4, var--);
+ err |= check_one_size_helper(1, size_sub, 3, 2);
+ err |= check_one_size_helper(9, size_sub, 9, 0);
+ err |= check_one_size_helper(SIZE_MAX, size_sub, 9, -3);
+ err |= check_one_size_helper(SIZE_MAX, size_sub, 0, 9);
+ err |= check_one_size_helper(SIZE_MAX, size_sub, 2, 3);
+ err |= check_one_size_helper(SIZE_MAX, size_sub, SIZE_MAX, 0);
+ err |= check_one_size_helper(SIZE_MAX, size_sub, SIZE_MAX, 10);
+ err |= check_one_size_helper(SIZE_MAX, size_sub, 0, SIZE_MAX);
+ err |= check_one_size_helper(SIZE_MAX, size_sub, 14, SIZE_MAX);
+ err |= check_one_size_helper(SIZE_MAX - 2, size_sub, SIZE_MAX - 1, 1);
+ err |= check_one_size_helper(SIZE_MAX - 4, size_sub, SIZE_MAX - 1, 3);
+ err |= check_one_size_helper(1, size_sub, SIZE_MAX - 1, -3);
+
+ var = 4;
+ err |= check_one_size_helper(4 * sizeof(*obj->data),
+ flex_array_size, obj, data, var++);
+ err |= check_one_size_helper(5 * sizeof(*obj->data),
+ flex_array_size, obj, data, var++);
+ err |= check_one_size_helper(0, flex_array_size, obj, data, 0);
+ err |= check_one_size_helper(sizeof(*obj->data),
+ flex_array_size, obj, data, 1);
+ err |= check_one_size_helper(7 * sizeof(*obj->data),
+ flex_array_size, obj, data, 7);
+ err |= check_one_size_helper(SIZE_MAX,
+ flex_array_size, obj, data, -1);
+ err |= check_one_size_helper(SIZE_MAX,
+ flex_array_size, obj, data, SIZE_MAX - 4);
+
+ var = 4;
+ err |= check_one_size_helper(sizeof(*obj) + (4 * sizeof(*obj->data)),
+ struct_size, obj, data, var++);
+ err |= check_one_size_helper(sizeof(*obj) + (5 * sizeof(*obj->data)),
+ struct_size, obj, data, var++);
+ err |= check_one_size_helper(sizeof(*obj), struct_size, obj, data, 0);
+ err |= check_one_size_helper(sizeof(*obj) + sizeof(*obj->data),
+ struct_size, obj, data, 1);
+ err |= check_one_size_helper(SIZE_MAX,
+ struct_size, obj, data, -3);
+ err |= check_one_size_helper(SIZE_MAX,
+ struct_size, obj, data, SIZE_MAX - 3);
+
+ pr_info("%d overflow size helper tests finished\n", count);
+
+ return err;
+}
+
static int __init test_module_init(void)
{
int err = 0;
err |= test_overflow_calculation();
err |= test_overflow_shift();
+ err |= test_overflow_size_helpers();
err |= test_overflow_allocation();
if (err) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 527/731] fs/ntfs3: Harden against integer overflows
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (525 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 526/731] overflow: Implement size_t saturating arithmetic helpers Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 528/731] iommu/sun50i: Fix reset release Greg Kroah-Hartman
` (214 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dan Carpenter, Konstantin Komarov,
Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit e001e60869390686809663c02bceb1d3922548fb ]
Smatch complains that the "add_bytes" is not to be trusted. Use
size_add() to prevent an integer overflow.
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ntfs3/xattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c
index eb799a5cdfad..8847db015908 100644
--- a/fs/ntfs3/xattr.c
+++ b/fs/ntfs3/xattr.c
@@ -107,7 +107,7 @@ static int ntfs_read_ea(struct ntfs_inode *ni, struct EA_FULL **ea,
return -EFBIG;
/* Allocate memory for packed Ea. */
- ea_p = kmalloc(size + add_bytes, GFP_NOFS);
+ ea_p = kmalloc(size_add(size, add_bytes), GFP_NOFS);
if (!ea_p)
return -ENOMEM;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 528/731] iommu/sun50i: Fix reset release
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (526 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 527/731] fs/ntfs3: Harden against integer overflows Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 529/731] iommu/sun50i: Consider all fault sources for reset Greg Kroah-Hartman
` (213 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jernej Skrabec, Joerg Roedel, Sasha Levin
From: Jernej Skrabec <jernej.skrabec@gmail.com>
[ Upstream commit 9ad0c1252e84dbc664f0462707182245ed603237 ]
Reset signal is asserted by writing 0 to the corresponding locations of
masters we want to reset. So in order to deassert all reset signals, we
should write 1's to all locations.
Current code writes 1's to locations of masters which were just reset
which is good. However, at the same time it also writes 0's to other
locations and thus asserts reset signals of remaining masters. Fix code
by writing all 1's when we want to deassert all reset signals.
This bug was discovered when working with Cedrus (video decoder). When
it faulted, display went blank due to reset signal assertion.
Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-2-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/sun50i-iommu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/sun50i-iommu.c b/drivers/iommu/sun50i-iommu.c
index 92997021e188..3fd1ee147953 100644
--- a/drivers/iommu/sun50i-iommu.c
+++ b/drivers/iommu/sun50i-iommu.c
@@ -27,6 +27,7 @@
#include <linux/types.h>
#define IOMMU_RESET_REG 0x010
+#define IOMMU_RESET_RELEASE_ALL 0xffffffff
#define IOMMU_ENABLE_REG 0x020
#define IOMMU_ENABLE_ENABLE BIT(0)
@@ -894,7 +895,7 @@ static irqreturn_t sun50i_iommu_irq(int irq, void *dev_id)
iommu_write(iommu, IOMMU_INT_CLR_REG, status);
iommu_write(iommu, IOMMU_RESET_REG, ~status);
- iommu_write(iommu, IOMMU_RESET_REG, status);
+ iommu_write(iommu, IOMMU_RESET_REG, IOMMU_RESET_RELEASE_ALL);
spin_unlock(&iommu->iommu_lock);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 529/731] iommu/sun50i: Consider all fault sources for reset
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (527 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 528/731] iommu/sun50i: Fix reset release Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 530/731] iommu/sun50i: Fix R/W permission check Greg Kroah-Hartman
` (212 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jernej Skrabec, Joerg Roedel, Sasha Levin
From: Jernej Skrabec <jernej.skrabec@gmail.com>
[ Upstream commit cef20703e2b2276aaa402ec5a65ec9a09963b83e ]
We have to reset masters for all faults - permissions, L1 fault or L2
fault. Currently it's done only for permissions. If other type of fault
happens, master is in locked up state. Fix that by really considering
all fault sources.
Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-3-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/sun50i-iommu.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/sun50i-iommu.c b/drivers/iommu/sun50i-iommu.c
index 3fd1ee147953..5b87672c689f 100644
--- a/drivers/iommu/sun50i-iommu.c
+++ b/drivers/iommu/sun50i-iommu.c
@@ -870,8 +870,8 @@ static phys_addr_t sun50i_iommu_handle_perm_irq(struct sun50i_iommu *iommu)
static irqreturn_t sun50i_iommu_irq(int irq, void *dev_id)
{
+ u32 status, l1_status, l2_status, resets;
struct sun50i_iommu *iommu = dev_id;
- u32 status;
spin_lock(&iommu->iommu_lock);
@@ -881,6 +881,9 @@ static irqreturn_t sun50i_iommu_irq(int irq, void *dev_id)
return IRQ_NONE;
}
+ l1_status = iommu_read(iommu, IOMMU_L1PG_INT_REG);
+ l2_status = iommu_read(iommu, IOMMU_L2PG_INT_REG);
+
if (status & IOMMU_INT_INVALID_L2PG)
sun50i_iommu_handle_pt_irq(iommu,
IOMMU_INT_ERR_ADDR_L2_REG,
@@ -894,7 +897,8 @@ static irqreturn_t sun50i_iommu_irq(int irq, void *dev_id)
iommu_write(iommu, IOMMU_INT_CLR_REG, status);
- iommu_write(iommu, IOMMU_RESET_REG, ~status);
+ resets = (status | l1_status | l2_status) & IOMMU_INT_MASTER_MASK;
+ iommu_write(iommu, IOMMU_RESET_REG, ~resets);
iommu_write(iommu, IOMMU_RESET_REG, IOMMU_RESET_RELEASE_ALL);
spin_unlock(&iommu->iommu_lock);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 530/731] iommu/sun50i: Fix R/W permission check
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (528 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 529/731] iommu/sun50i: Consider all fault sources for reset Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 531/731] iommu/sun50i: Fix flush size Greg Kroah-Hartman
` (211 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jernej Skrabec, Joerg Roedel, Sasha Levin
From: Jernej Skrabec <jernej.skrabec@gmail.com>
[ Upstream commit eac0104dc69be50bed86926d6f32e82b44f8c921 ]
Because driver has enum type permissions and iommu subsystem has bitmap
type, we have to be careful how check for combined read and write
permissions is done. In such case, we have to mask both permissions and
check that both are set at the same time.
Current code just masks both flags but doesn't check that both are set.
In short, it always sets R/W permission, regardles if requested
permissions were RO, WO or RW. Fix that.
Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-4-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/sun50i-iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/sun50i-iommu.c b/drivers/iommu/sun50i-iommu.c
index 5b87672c689f..16bfba1faee1 100644
--- a/drivers/iommu/sun50i-iommu.c
+++ b/drivers/iommu/sun50i-iommu.c
@@ -271,7 +271,7 @@ static u32 sun50i_mk_pte(phys_addr_t page, int prot)
enum sun50i_iommu_aci aci;
u32 flags = 0;
- if (prot & (IOMMU_READ | IOMMU_WRITE))
+ if ((prot & (IOMMU_READ | IOMMU_WRITE)) == (IOMMU_READ | IOMMU_WRITE))
aci = SUN50I_IOMMU_ACI_RD_WR;
else if (prot & IOMMU_READ)
aci = SUN50I_IOMMU_ACI_RD;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 531/731] iommu/sun50i: Fix flush size
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (529 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 530/731] iommu/sun50i: Fix R/W permission check Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 532/731] iommu/rockchip: fix permission bits in page table entries v2 Greg Kroah-Hartman
` (210 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jernej Skrabec, Joerg Roedel, Sasha Levin
From: Jernej Skrabec <jernej.skrabec@gmail.com>
[ Upstream commit 67a8a67f9eceb72e4c73d1d09ed9ab04f4b8e12d ]
Function sun50i_table_flush() takes number of entries as an argument,
not number of bytes. Fix that mistake in sun50i_dte_get_page_table().
Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-5-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/sun50i-iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/sun50i-iommu.c b/drivers/iommu/sun50i-iommu.c
index 16bfba1faee1..ece3d4b4d7ca 100644
--- a/drivers/iommu/sun50i-iommu.c
+++ b/drivers/iommu/sun50i-iommu.c
@@ -512,7 +512,7 @@ static u32 *sun50i_dte_get_page_table(struct sun50i_iommu_domain *sun50i_domain,
sun50i_iommu_free_page_table(iommu, drop_pt);
}
- sun50i_table_flush(sun50i_domain, page_table, PT_SIZE);
+ sun50i_table_flush(sun50i_domain, page_table, NUM_PT_ENTRIES);
sun50i_table_flush(sun50i_domain, dte_addr, 1);
return page_table;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 532/731] iommu/rockchip: fix permission bits in page table entries v2
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (530 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 531/731] iommu/sun50i: Fix flush size Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 533/731] phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices Greg Kroah-Hartman
` (209 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michael Riesch, Heiko Stuebner,
Joerg Roedel, Sasha Levin
From: Michael Riesch <michael.riesch@wolfvision.net>
[ Upstream commit 7eb99841f340b80be0d0973b0deb592d75fb8928 ]
As pointed out in the corresponding downstream fix [0], the permission bits
of the page table entries are compatible between v1 and v2 of the IOMMU.
This is in contrast to the current mainline code that incorrectly assumes
that the read and write permission bits are switched. Fix the permission
bits by reusing the v1 bit defines.
[0] https://github.com/rockchip-linux/kernel/commit/e3bc123a2260145e34b57454da3db0edd117eb8e
Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2")
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20221102063553.2464161-1-michael.riesch@wolfvision.net
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/rockchip-iommu.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index 7f23ad61c094..823f1a7d8c6e 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -280,19 +280,17 @@ static u32 rk_mk_pte(phys_addr_t page, int prot)
* 11:9 - Page address bit 34:32
* 8:4 - Page address bit 39:35
* 3 - Security
- * 2 - Readable
- * 1 - Writable
+ * 2 - Writable
+ * 1 - Readable
* 0 - 1 if Page @ Page address is valid
*/
-#define RK_PTE_PAGE_READABLE_V2 BIT(2)
-#define RK_PTE_PAGE_WRITABLE_V2 BIT(1)
static u32 rk_mk_pte_v2(phys_addr_t page, int prot)
{
u32 flags = 0;
- flags |= (prot & IOMMU_READ) ? RK_PTE_PAGE_READABLE_V2 : 0;
- flags |= (prot & IOMMU_WRITE) ? RK_PTE_PAGE_WRITABLE_V2 : 0;
+ flags |= (prot & IOMMU_READ) ? RK_PTE_PAGE_READABLE : 0;
+ flags |= (prot & IOMMU_WRITE) ? RK_PTE_PAGE_WRITABLE : 0;
return rk_mk_dte_v2(page) | flags;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 533/731] phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (531 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 532/731] iommu/rockchip: fix permission bits in page table entries v2 Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 534/731] include/uapi/linux/swab: Fix potentially missing __always_inline Greg Kroah-Hartman
` (208 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Al Cooper, Justin Chen,
Florian Fainelli, Vinod Koul, Sasha Levin
From: Al Cooper <alcooperx@gmail.com>
[ Upstream commit f7fc5b7090372fc4dd7798c874635ca41b8ba733 ]
The PHY's "wakeup_count" is not incrementing when waking from
WoL. The wakeup count can be found in sysfs at:
/sys/bus/platform/devices/rdb/*.usb-phy/power/wakeup_count.
The problem is that the system wakup event handler was being passed
the wrong "device" by the PHY driver.
Fixes: f1c0db40a3ad ("phy: usb: Add "wake on" functionality")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/1665005418-15807-3-git-send-email-justinpopo6@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/broadcom/phy-brcm-usb.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index 2cb3779fcdf8..c0c3ab9b2a15 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -102,9 +102,9 @@ static int brcm_pm_notifier(struct notifier_block *notifier,
static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id)
{
- struct phy *gphy = dev_id;
+ struct device *dev = dev_id;
- pm_wakeup_event(&gphy->dev, 0);
+ pm_wakeup_event(dev, 0);
return IRQ_HANDLED;
}
@@ -451,7 +451,7 @@ static int brcm_usb_phy_dvr_init(struct platform_device *pdev,
if (priv->wake_irq >= 0) {
err = devm_request_irq(dev, priv->wake_irq,
brcm_usb_phy_wake_isr, 0,
- dev_name(dev), gphy);
+ dev_name(dev), dev);
if (err < 0)
return err;
device_set_wakeup_capable(dev, 1);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 534/731] include/uapi/linux/swab: Fix potentially missing __always_inline
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (532 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 533/731] phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 535/731] pwm: tegra: Improve required rate calculation Greg Kroah-Hartman
` (207 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Matt Redfearn, Florian Fainelli,
Arnd Bergmann, Nathan Chancellor, Petr Vaněk, Sasha Levin
From: Matt Redfearn <matt.redfearn@mips.com>
[ Upstream commit defbab270d45e32b068e7e73c3567232d745c60f ]
Commit bc27fb68aaad ("include/uapi/linux/byteorder, swab: force inlining
of some byteswap operations") added __always_inline to swab functions
and commit 283d75737837 ("uapi/linux/stddef.h: Provide __always_inline to
userspace headers") added a definition of __always_inline for use in
exported headers when the kernel's compiler.h is not available.
However, since swab.h does not include stddef.h, if the header soup does
not indirectly include it, the definition of __always_inline is missing,
resulting in a compilation failure, which was observed compiling the
perf tool using exported headers containing this commit:
In file included from /usr/include/linux/byteorder/little_endian.h:12:0,
from /usr/include/asm/byteorder.h:14,
from tools/include/uapi/linux/perf_event.h:20,
from perf.h:8,
from builtin-bench.c:18:
/usr/include/linux/swab.h:160:8: error: unknown type name `__always_inline'
static __always_inline __u16 __swab16p(const __u16 *p)
Fix this by replacing the inclusion of linux/compiler.h with
linux/stddef.h to ensure that we pick up that definition if required,
without relying on it's indirect inclusion. compiler.h is then included
indirectly, via stddef.h.
Fixes: 283d75737837 ("uapi/linux/stddef.h: Provide __always_inline to userspace headers")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/uapi/linux/swab.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/uapi/linux/swab.h b/include/uapi/linux/swab.h
index 7272f85d6d6a..3736f2fe1541 100644
--- a/include/uapi/linux/swab.h
+++ b/include/uapi/linux/swab.h
@@ -3,7 +3,7 @@
#define _UAPI_LINUX_SWAB_H
#include <linux/types.h>
-#include <linux/compiler.h>
+#include <linux/stddef.h>
#include <asm/bitsperlong.h>
#include <asm/swab.h>
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 535/731] pwm: tegra: Improve required rate calculation
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (533 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 534/731] include/uapi/linux/swab: Fix potentially missing __always_inline Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 536/731] fs/ntfs3: Fix slab-out-of-bounds read in ntfs_trim_fs Greg Kroah-Hartman
` (206 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jon Hunter, Uwe Kleine-König,
Thierry Reding, Sasha Levin
From: Jon Hunter <jonathanh@nvidia.com>
[ Upstream commit f271946117dde2ca8741b8138b347b2d68e6ad56 ]
For the case where dev_pm_opp_set_rate() is called to set the PWM clock
rate, the requested rate is calculated as ...
required_clk_rate = (NSEC_PER_SEC / period_ns) << PWM_DUTY_WIDTH;
The above calculation may lead to rounding errors because the
NSEC_PER_SEC is divided by 'period_ns' before applying the
PWM_DUTY_WIDTH multiplication factor. For example, if the period is
45334ns, the above calculation yields a rate of 5646848Hz instead of
5646976Hz. Fix this by applying the multiplication factor before
dividing and using the DIV_ROUND_UP macro which yields the expected
result of 5646976Hz.
Fixes: 1d7796bdb63a ("pwm: tegra: Support dynamic clock frequency configuration")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pwm/pwm-tegra.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index 11a10b575ace..2735a97906fd 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -142,8 +142,8 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
* source clock rate as required_clk_rate, PWM controller will
* be able to configure the requested period.
*/
- required_clk_rate =
- (NSEC_PER_SEC / period_ns) << PWM_DUTY_WIDTH;
+ required_clk_rate = DIV_ROUND_UP_ULL(NSEC_PER_SEC << PWM_DUTY_WIDTH,
+ period_ns);
err = clk_set_rate(pc->clk, required_clk_rate);
if (err < 0)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 536/731] fs/ntfs3: Fix slab-out-of-bounds read in ntfs_trim_fs
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (534 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 535/731] pwm: tegra: Improve required rate calculation Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 537/731] dmaengine: idxd: Fix crc_val field for completion record Greg Kroah-Hartman
` (205 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+b892240eac461e488d51,
Abdun Nihaal, Konstantin Komarov, Sasha Levin
From: Abdun Nihaal <abdun.nihaal@gmail.com>
[ Upstream commit 557d19675a470bb0a98beccec38c5dc3735c20fa ]
Syzbot reports an out of bound access in ntfs_trim_fs.
The cause of this is using a loop termination condition that compares
window index (iw) with wnd->nbits instead of wnd->nwnd, due to which the
index used for wnd->free_bits exceeds the size of the array allocated.
Fix the loop condition.
Fixes: 3f3b442b5ad2 ("fs/ntfs3: Add bitmap")
Link: https://syzkaller.appspot.com/bug?extid=b892240eac461e488d51
Reported-by: syzbot+b892240eac461e488d51@syzkaller.appspotmail.com
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ntfs3/bitmap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ntfs3/bitmap.c b/fs/ntfs3/bitmap.c
index aa184407520f..7f2055b7427a 100644
--- a/fs/ntfs3/bitmap.c
+++ b/fs/ntfs3/bitmap.c
@@ -1432,7 +1432,7 @@ int ntfs_trim_fs(struct ntfs_sb_info *sbi, struct fstrim_range *range)
down_read_nested(&wnd->rw_lock, BITMAP_MUTEX_CLUSTERS);
- for (; iw < wnd->nbits; iw++, wbit = 0) {
+ for (; iw < wnd->nwnd; iw++, wbit = 0) {
CLST lcn_wnd = iw * wbits;
struct buffer_head *bh;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 537/731] dmaengine: idxd: Fix crc_val field for completion record
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (535 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 536/731] fs/ntfs3: Fix slab-out-of-bounds read in ntfs_trim_fs Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 538/731] rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0 Greg Kroah-Hartman
` (204 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nirav N Shah, Fenghua Yu,
Dave Jiang, Vinod Koul, Sasha Levin
From: Fenghua Yu <fenghua.yu@intel.com>
[ Upstream commit dc901d98b1fe6e52ab81cd3e0879379168e06daa ]
The crc_val in the completion record should be 64 bits and not 32 bits.
Fixes: 4ac823e9cd85 ("dmaengine: idxd: fix delta_rec and crc size field for completion record")
Reported-by: Nirav N Shah <nirav.n.shah@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221111012715.2031481-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/uapi/linux/idxd.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/uapi/linux/idxd.h b/include/uapi/linux/idxd.h
index c750eac09fc9..f7c01709cb0f 100644
--- a/include/uapi/linux/idxd.h
+++ b/include/uapi/linux/idxd.h
@@ -272,7 +272,7 @@ struct dsa_completion_record {
};
uint32_t delta_rec_size;
- uint32_t crc_val;
+ uint64_t crc_val;
/* DIF check & strip */
struct {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 538/731] rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (536 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 537/731] dmaengine: idxd: Fix crc_val field for completion record Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 539/731] rtc: cmos: Fix event handler registration ordering issue Greg Kroah-Hartman
` (203 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rafael J. Wysocki,
Mario Limonciello, Alexandre Belloni, Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit 6492fed7d8c95f53b0b804ef541324d924d95d41 ]
The ACPI_FADT_LOW_POWER_S0 flag merely means that it is better to
use low-power S0 idle on the given platform than S3 (provided that
the latter is supported) and it doesn't preclude using either of
them (which of them will be used depends on the choices made by user
space).
For this reason, there is no benefit from checking that flag in
use_acpi_alarm_quirks().
First off, it cannot be a bug to do S3 with use_acpi_alarm set,
because S3 can be used on systems with ACPI_FADT_LOW_POWER_S0 and it
must work if really supported, so the ACPI_FADT_LOW_POWER_S0 check is
not needed to protect the S3-capable systems from failing.
Second, suspend-to-idle can be carried out on a system with
ACPI_FADT_LOW_POWER_S0 unset and it is expected to work, so if setting
use_acpi_alarm is needed to handle that case correctly, it should be
set regardless of the ACPI_FADT_LOW_POWER_S0 value.
Accordingly, drop the ACPI_FADT_LOW_POWER_S0 check from
use_acpi_alarm_quirks().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/12054246.O9o76ZdvQC@kreacher
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-cmos.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 7c006c2b125f..bdb1df843c78 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -1260,9 +1260,6 @@ static void use_acpi_alarm_quirks(void)
if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
return;
- if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
- return;
-
if (!is_hpet_enabled())
return;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 539/731] rtc: cmos: Fix event handler registration ordering issue
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (537 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 538/731] rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0 Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 540/731] rtc: cmos: Fix wake alarm breakage Greg Kroah-Hartman
` (202 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mel Gorman, Rafael J. Wysocki,
Bjorn Helgaas, Alexandre Belloni, Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit 4919d3eb2ec0ee364f7e3cf2d99646c1b224fae8 ]
Because acpi_install_fixed_event_handler() enables the event
automatically on success, it is incorrect to call it before the
handler routine passed to it is ready to handle events.
Unfortunately, the rtc-cmos driver does exactly the incorrect thing
by calling cmos_wake_setup(), which passes rtc_handler() to
acpi_install_fixed_event_handler(), before cmos_do_probe(), because
rtc_handler() uses dev_get_drvdata() to get to the cmos object
pointer and the driver data pointer is only populated in
cmos_do_probe().
This leads to a NULL pointer dereference in rtc_handler() on boot
if the RTC fixed event happens to be active at the init time.
To address this issue, change the initialization ordering of the
driver so that cmos_wake_setup() is always called after a successful
cmos_do_probe() call.
While at it, change cmos_pnp_probe() to call cmos_do_probe() after
the initial if () statement used for computing the IRQ argument to
be passed to cmos_do_probe() which is cleaner than calling it in
each branch of that if () (local variable "irq" can be of type int,
because it is passed to that function as an argument of type int).
Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check
ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number
of systems, because previously it only affected systems with
ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that
commit.
Fixes: 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0")
Fixes: a474aaedac99 ("rtc-cmos: move wake setup from ACPI glue into RTC driver")
Link: https://lore.kernel.org/linux-acpi/20221010141630.zfzi7mk7zvnmclzy@techsingularity.net/
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/5629262.DvuYhMxLoT@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-cmos.c | 29 +++++++++++++++++++----------
1 file changed, 19 insertions(+), 10 deletions(-)
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index bdb1df843c78..610413b4e9ca 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -1352,10 +1352,10 @@ static void cmos_check_acpi_rtc_status(struct device *dev,
static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
- cmos_wake_setup(&pnp->dev);
+ int irq, ret;
if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) {
- unsigned int irq = 0;
+ irq = 0;
#ifdef CONFIG_X86
/* Some machines contain a PNP entry for the RTC, but
* don't define the IRQ. It should always be safe to
@@ -1364,13 +1364,17 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
if (nr_legacy_irqs())
irq = RTC_IRQ;
#endif
- return cmos_do_probe(&pnp->dev,
- pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
} else {
- return cmos_do_probe(&pnp->dev,
- pnp_get_resource(pnp, IORESOURCE_IO, 0),
- pnp_irq(pnp, 0));
+ irq = pnp_irq(pnp, 0);
}
+
+ ret = cmos_do_probe(&pnp->dev, pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
+ if (ret)
+ return ret;
+
+ cmos_wake_setup(&pnp->dev);
+
+ return 0;
}
static void cmos_pnp_remove(struct pnp_dev *pnp)
@@ -1454,10 +1458,9 @@ static inline void cmos_of_init(struct platform_device *pdev) {}
static int __init cmos_platform_probe(struct platform_device *pdev)
{
struct resource *resource;
- int irq;
+ int irq, ret;
cmos_of_init(pdev);
- cmos_wake_setup(&pdev->dev);
if (RTC_IOMAPPED)
resource = platform_get_resource(pdev, IORESOURCE_IO, 0);
@@ -1467,7 +1470,13 @@ static int __init cmos_platform_probe(struct platform_device *pdev)
if (irq < 0)
irq = -1;
- return cmos_do_probe(&pdev->dev, resource, irq);
+ ret = cmos_do_probe(&pdev->dev, resource, irq);
+ if (ret)
+ return ret;
+
+ cmos_wake_setup(&pdev->dev);
+
+ return 0;
}
static int cmos_platform_remove(struct platform_device *pdev)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 540/731] rtc: cmos: Fix wake alarm breakage
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (538 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 539/731] rtc: cmos: Fix event handler registration ordering issue Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 541/731] rtc: cmos: fix build on non-ACPI platforms Greg Kroah-Hartman
` (201 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Rui, Todd Brandt,
Rafael J. Wysocki, Alexandre Belloni, Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit 0782b66ed2fbb035dda76111df0954515e417b24 ]
Commit 4919d3eb2ec0 ("rtc: cmos: Fix event handler registration
ordering issue") overlooked the fact that cmos_do_probe() depended
on the preparations carried out by cmos_wake_setup() and the wake
alarm stopped working after the ordering of them had been changed.
Address this by partially reverting commit 4919d3eb2ec0 so that
cmos_wake_setup() is called before cmos_do_probe() again and moving
the rtc_wake_setup() invocation from cmos_wake_setup() directly to the
callers of cmos_do_probe() where it will happen after a successful
completion of the latter.
Fixes: 4919d3eb2ec0 ("rtc: cmos: Fix event handler registration ordering issue")
Reported-by: Zhang Rui <rui.zhang@intel.com>
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/5887691.lOV4Wx5bFT@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-cmos.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 610413b4e9ca..01fb31f8e534 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -1233,6 +1233,9 @@ static u32 rtc_handler(void *context)
static inline void rtc_wake_setup(struct device *dev)
{
+ if (acpi_disabled)
+ return;
+
acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, dev);
/*
* After the RTC handler is installed, the Fixed_RTC event should
@@ -1286,7 +1289,6 @@ static void cmos_wake_setup(struct device *dev)
use_acpi_alarm_quirks();
- rtc_wake_setup(dev);
acpi_rtc_info.wake_on = rtc_wake_on;
acpi_rtc_info.wake_off = rtc_wake_off;
@@ -1354,6 +1356,8 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
int irq, ret;
+ cmos_wake_setup(&pnp->dev);
+
if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) {
irq = 0;
#ifdef CONFIG_X86
@@ -1372,7 +1376,7 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
if (ret)
return ret;
- cmos_wake_setup(&pnp->dev);
+ rtc_wake_setup(&pnp->dev);
return 0;
}
@@ -1461,6 +1465,7 @@ static int __init cmos_platform_probe(struct platform_device *pdev)
int irq, ret;
cmos_of_init(pdev);
+ cmos_wake_setup(&pdev->dev);
if (RTC_IOMAPPED)
resource = platform_get_resource(pdev, IORESOURCE_IO, 0);
@@ -1474,7 +1479,7 @@ static int __init cmos_platform_probe(struct platform_device *pdev)
if (ret)
return ret;
- cmos_wake_setup(&pdev->dev);
+ rtc_wake_setup(&pdev->dev);
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 541/731] rtc: cmos: fix build on non-ACPI platforms
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (539 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 540/731] rtc: cmos: Fix wake alarm breakage Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 542/731] rtc: cmos: Call cmos_wake_setup() from cmos_do_probe() Greg Kroah-Hartman
` (200 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernel test robot,
Alexandre Belloni, Sasha Levin
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
[ Upstream commit db4e955ae333567dea02822624106c0b96a2f84f ]
Now that rtc_wake_setup is called outside of cmos_wake_setup, it also need
to be defined on non-ACPI platforms.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221018203512.2532407-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-cmos.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 01fb31f8e534..58cc2bae2f8a 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -1346,6 +1346,9 @@ static void cmos_check_acpi_rtc_status(struct device *dev,
{
}
+static void rtc_wake_setup(struct device *dev)
+{
+}
#endif
#ifdef CONFIG_PNP
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 542/731] rtc: cmos: Call cmos_wake_setup() from cmos_do_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (540 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 541/731] rtc: cmos: fix build on non-ACPI platforms Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 543/731] rtc: cmos: Call rtc_wake_setup() " Greg Kroah-Hartman
` (199 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rafael J. Wysocki, Zhang Rui,
Andy Shevchenko, Alexandre Belloni, Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit 508ccdfb86b21da37ad091003a4d4567709d5dfb ]
Notice that cmos_wake_setup() is the only user of acpi_rtc_info and it
can operate on the cmos_rtc variable directly, so it need not set the
platform_data pointer before cmos_do_probe() is called. Instead, it
can be called by cmos_do_probe() in the case when the platform_data
pointer is not set to implement the default behavior (which is to use
the FADT information as long as ACPI support is enabled).
Modify the code accordingly.
While at it, drop a comment that doesn't really match the code it is
supposed to be describing.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/4803444.31r3eYUQgx@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-cmos.c | 47 ++++++++++++++++++++----------------------
1 file changed, 22 insertions(+), 25 deletions(-)
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 58cc2bae2f8a..a84262265d6d 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -744,6 +744,8 @@ static irqreturn_t cmos_interrupt(int irq, void *p)
return IRQ_NONE;
}
+static void cmos_wake_setup(struct device *dev);
+
#ifdef CONFIG_PNP
#define INITSECTION
@@ -827,19 +829,27 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
if (info->address_space)
address_space = info->address_space;
- if (info->rtc_day_alarm && info->rtc_day_alarm < 128)
- cmos_rtc.day_alrm = info->rtc_day_alarm;
- if (info->rtc_mon_alarm && info->rtc_mon_alarm < 128)
- cmos_rtc.mon_alrm = info->rtc_mon_alarm;
- if (info->rtc_century && info->rtc_century < 128)
- cmos_rtc.century = info->rtc_century;
+ cmos_rtc.day_alrm = info->rtc_day_alarm;
+ cmos_rtc.mon_alrm = info->rtc_mon_alarm;
+ cmos_rtc.century = info->rtc_century;
if (info->wake_on && info->wake_off) {
cmos_rtc.wake_on = info->wake_on;
cmos_rtc.wake_off = info->wake_off;
}
+ } else {
+ cmos_wake_setup(dev);
}
+ if (cmos_rtc.day_alrm >= 128)
+ cmos_rtc.day_alrm = 0;
+
+ if (cmos_rtc.mon_alrm >= 128)
+ cmos_rtc.mon_alrm = 0;
+
+ if (cmos_rtc.century >= 128)
+ cmos_rtc.century = 0;
+
cmos_rtc.dev = dev;
dev_set_drvdata(dev, &cmos_rtc);
@@ -1275,13 +1285,6 @@ static void use_acpi_alarm_quirks(void)
static inline void use_acpi_alarm_quirks(void) { }
#endif
-/* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find
- * its device node and pass extra config data. This helps its driver use
- * capabilities that the now-obsolete mc146818 didn't have, and informs it
- * that this board's RTC is wakeup-capable (per ACPI spec).
- */
-static struct cmos_rtc_board_info acpi_rtc_info;
-
static void cmos_wake_setup(struct device *dev)
{
if (acpi_disabled)
@@ -1289,26 +1292,23 @@ static void cmos_wake_setup(struct device *dev)
use_acpi_alarm_quirks();
- acpi_rtc_info.wake_on = rtc_wake_on;
- acpi_rtc_info.wake_off = rtc_wake_off;
+ cmos_rtc.wake_on = rtc_wake_on;
+ cmos_rtc.wake_off = rtc_wake_off;
- /* workaround bug in some ACPI tables */
+ /* ACPI tables bug workaround. */
if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
dev_dbg(dev, "bogus FADT month_alarm (%d)\n",
acpi_gbl_FADT.month_alarm);
acpi_gbl_FADT.month_alarm = 0;
}
- acpi_rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm;
- acpi_rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm;
- acpi_rtc_info.rtc_century = acpi_gbl_FADT.century;
+ cmos_rtc.day_alrm = acpi_gbl_FADT.day_alarm;
+ cmos_rtc.mon_alrm = acpi_gbl_FADT.month_alarm;
+ cmos_rtc.century = acpi_gbl_FADT.century;
- /* NOTE: S4_RTC_WAKE is NOT currently useful to Linux */
if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
dev_info(dev, "RTC can wake from S4\n");
- dev->platform_data = &acpi_rtc_info;
-
/* RTC always wakes from S1/S2/S3, and often S4/STD */
device_init_wakeup(dev, 1);
}
@@ -1359,8 +1359,6 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
int irq, ret;
- cmos_wake_setup(&pnp->dev);
-
if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) {
irq = 0;
#ifdef CONFIG_X86
@@ -1468,7 +1466,6 @@ static int __init cmos_platform_probe(struct platform_device *pdev)
int irq, ret;
cmos_of_init(pdev);
- cmos_wake_setup(&pdev->dev);
if (RTC_IOMAPPED)
resource = platform_get_resource(pdev, IORESOURCE_IO, 0);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 543/731] rtc: cmos: Call rtc_wake_setup() from cmos_do_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (541 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 542/731] rtc: cmos: Call cmos_wake_setup() from cmos_do_probe() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 544/731] rtc: cmos: Eliminate forward declarations of some functions Greg Kroah-Hartman
` (198 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rafael J. Wysocki, Zhang Rui,
Andy Shevchenko, Alexandre Belloni, Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit 375bbba09692fe4c5218eddee8e312dd733fa846 ]
To reduce code duplication, move the invocation of rtc_wake_setup()
into cmos_do_probe() and simplify the callers of the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/2143522.irdbgypaU6@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-cmos.c | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index a84262265d6d..583116994a37 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -744,6 +744,7 @@ static irqreturn_t cmos_interrupt(int irq, void *p)
return IRQ_NONE;
}
+static inline void rtc_wake_setup(struct device *dev);
static void cmos_wake_setup(struct device *dev);
#ifdef CONFIG_PNP
@@ -938,6 +939,13 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
nvmem_cfg.size = address_space - NVRAM_OFFSET;
devm_rtc_nvmem_register(cmos_rtc.rtc, &nvmem_cfg);
+ /*
+ * Everything has gone well so far, so by default register a handler for
+ * the ACPI RTC fixed event.
+ */
+ if (!info)
+ rtc_wake_setup(dev);
+
dev_info(dev, "%s%s, %d bytes nvram%s\n",
!is_valid_irq(rtc_irq) ? "no alarms" :
cmos_rtc.mon_alrm ? "alarms up to one year" :
@@ -1357,7 +1365,7 @@ static void rtc_wake_setup(struct device *dev)
static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
- int irq, ret;
+ int irq;
if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) {
irq = 0;
@@ -1373,13 +1381,7 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
irq = pnp_irq(pnp, 0);
}
- ret = cmos_do_probe(&pnp->dev, pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
- if (ret)
- return ret;
-
- rtc_wake_setup(&pnp->dev);
-
- return 0;
+ return cmos_do_probe(&pnp->dev, pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
}
static void cmos_pnp_remove(struct pnp_dev *pnp)
@@ -1463,7 +1465,7 @@ static inline void cmos_of_init(struct platform_device *pdev) {}
static int __init cmos_platform_probe(struct platform_device *pdev)
{
struct resource *resource;
- int irq, ret;
+ int irq;
cmos_of_init(pdev);
@@ -1475,13 +1477,7 @@ static int __init cmos_platform_probe(struct platform_device *pdev)
if (irq < 0)
irq = -1;
- ret = cmos_do_probe(&pdev->dev, resource, irq);
- if (ret)
- return ret;
-
- rtc_wake_setup(&pdev->dev);
-
- return 0;
+ return cmos_do_probe(&pdev->dev, resource, irq);
}
static int cmos_platform_remove(struct platform_device *pdev)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 544/731] rtc: cmos: Eliminate forward declarations of some functions
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (542 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 543/731] rtc: cmos: Call rtc_wake_setup() " Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 545/731] rtc: cmos: Rename ACPI-related functions Greg Kroah-Hartman
` (197 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rafael J. Wysocki, Zhang Rui,
Andy Shevchenko, Alexandre Belloni, Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit dca4d3b71c8a09a16951add656711fbd6f5bfbb0 ]
Reorder the ACPI-related code before cmos_do_probe() so as to eliminate
excessive forward declarations of some functions.
While at it, for consistency, add the inline modifier to the
definitions of empty stub static funtions and remove it from the
corresponding definitions of functions with non-empty bodies.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/13157911.uLZWGnKmhe@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-cmos.c | 304 ++++++++++++++++++++---------------------
1 file changed, 149 insertions(+), 155 deletions(-)
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 583116994a37..2a21d8281aa6 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -744,8 +744,155 @@ static irqreturn_t cmos_interrupt(int irq, void *p)
return IRQ_NONE;
}
-static inline void rtc_wake_setup(struct device *dev);
-static void cmos_wake_setup(struct device *dev);
+#ifdef CONFIG_ACPI
+
+#include <linux/acpi.h>
+
+static u32 rtc_handler(void *context)
+{
+ struct device *dev = context;
+ struct cmos_rtc *cmos = dev_get_drvdata(dev);
+ unsigned char rtc_control = 0;
+ unsigned char rtc_intr;
+ unsigned long flags;
+
+
+ /*
+ * Always update rtc irq when ACPI is used as RTC Alarm.
+ * Or else, ACPI SCI is enabled during suspend/resume only,
+ * update rtc irq in that case.
+ */
+ if (cmos_use_acpi_alarm())
+ cmos_interrupt(0, (void *)cmos->rtc);
+ else {
+ /* Fix me: can we use cmos_interrupt() here as well? */
+ spin_lock_irqsave(&rtc_lock, flags);
+ if (cmos_rtc.suspend_ctrl)
+ rtc_control = CMOS_READ(RTC_CONTROL);
+ if (rtc_control & RTC_AIE) {
+ cmos_rtc.suspend_ctrl &= ~RTC_AIE;
+ CMOS_WRITE(rtc_control, RTC_CONTROL);
+ rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
+ rtc_update_irq(cmos->rtc, 1, rtc_intr);
+ }
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ }
+
+ pm_wakeup_hard_event(dev);
+ acpi_clear_event(ACPI_EVENT_RTC);
+ acpi_disable_event(ACPI_EVENT_RTC, 0);
+ return ACPI_INTERRUPT_HANDLED;
+}
+
+static void rtc_wake_setup(struct device *dev)
+{
+ if (acpi_disabled)
+ return;
+
+ acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, dev);
+ /*
+ * After the RTC handler is installed, the Fixed_RTC event should
+ * be disabled. Only when the RTC alarm is set will it be enabled.
+ */
+ acpi_clear_event(ACPI_EVENT_RTC);
+ acpi_disable_event(ACPI_EVENT_RTC, 0);
+}
+
+static void rtc_wake_on(struct device *dev)
+{
+ acpi_clear_event(ACPI_EVENT_RTC);
+ acpi_enable_event(ACPI_EVENT_RTC, 0);
+}
+
+static void rtc_wake_off(struct device *dev)
+{
+ acpi_disable_event(ACPI_EVENT_RTC, 0);
+}
+
+#ifdef CONFIG_X86
+/* Enable use_acpi_alarm mode for Intel platforms no earlier than 2015 */
+static void use_acpi_alarm_quirks(void)
+{
+ if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+ return;
+
+ if (!is_hpet_enabled())
+ return;
+
+ if (dmi_get_bios_year() < 2015)
+ return;
+
+ use_acpi_alarm = true;
+}
+#else
+static inline void use_acpi_alarm_quirks(void) { }
+#endif
+
+static void cmos_wake_setup(struct device *dev)
+{
+ if (acpi_disabled)
+ return;
+
+ use_acpi_alarm_quirks();
+
+ cmos_rtc.wake_on = rtc_wake_on;
+ cmos_rtc.wake_off = rtc_wake_off;
+
+ /* ACPI tables bug workaround. */
+ if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
+ dev_dbg(dev, "bogus FADT month_alarm (%d)\n",
+ acpi_gbl_FADT.month_alarm);
+ acpi_gbl_FADT.month_alarm = 0;
+ }
+
+ cmos_rtc.day_alrm = acpi_gbl_FADT.day_alarm;
+ cmos_rtc.mon_alrm = acpi_gbl_FADT.month_alarm;
+ cmos_rtc.century = acpi_gbl_FADT.century;
+
+ if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
+ dev_info(dev, "RTC can wake from S4\n");
+
+ /* RTC always wakes from S1/S2/S3, and often S4/STD */
+ device_init_wakeup(dev, 1);
+}
+
+static void cmos_check_acpi_rtc_status(struct device *dev,
+ unsigned char *rtc_control)
+{
+ struct cmos_rtc *cmos = dev_get_drvdata(dev);
+ acpi_event_status rtc_status;
+ acpi_status status;
+
+ if (acpi_gbl_FADT.flags & ACPI_FADT_FIXED_RTC)
+ return;
+
+ status = acpi_get_event_status(ACPI_EVENT_RTC, &rtc_status);
+ if (ACPI_FAILURE(status)) {
+ dev_err(dev, "Could not get RTC status\n");
+ } else if (rtc_status & ACPI_EVENT_FLAG_SET) {
+ unsigned char mask;
+ *rtc_control &= ~RTC_AIE;
+ CMOS_WRITE(*rtc_control, RTC_CONTROL);
+ mask = CMOS_READ(RTC_INTR_FLAGS);
+ rtc_update_irq(cmos->rtc, 1, mask);
+ }
+}
+
+#else /* !CONFIG_ACPI */
+
+static inline void rtc_wake_setup(struct device *dev)
+{
+}
+
+static inline void cmos_wake_setup(struct device *dev)
+{
+}
+
+static inline void cmos_check_acpi_rtc_status(struct device *dev,
+ unsigned char *rtc_control)
+{
+}
+#endif /* CONFIG_ACPI */
#ifdef CONFIG_PNP
#define INITSECTION
@@ -1140,9 +1287,6 @@ static void cmos_check_wkalrm(struct device *dev)
}
}
-static void cmos_check_acpi_rtc_status(struct device *dev,
- unsigned char *rtc_control);
-
static int __maybe_unused cmos_resume(struct device *dev)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
@@ -1209,156 +1353,6 @@ static SIMPLE_DEV_PM_OPS(cmos_pm_ops, cmos_suspend, cmos_resume);
* predate even PNPBIOS should set up platform_bus devices.
*/
-#ifdef CONFIG_ACPI
-
-#include <linux/acpi.h>
-
-static u32 rtc_handler(void *context)
-{
- struct device *dev = context;
- struct cmos_rtc *cmos = dev_get_drvdata(dev);
- unsigned char rtc_control = 0;
- unsigned char rtc_intr;
- unsigned long flags;
-
-
- /*
- * Always update rtc irq when ACPI is used as RTC Alarm.
- * Or else, ACPI SCI is enabled during suspend/resume only,
- * update rtc irq in that case.
- */
- if (cmos_use_acpi_alarm())
- cmos_interrupt(0, (void *)cmos->rtc);
- else {
- /* Fix me: can we use cmos_interrupt() here as well? */
- spin_lock_irqsave(&rtc_lock, flags);
- if (cmos_rtc.suspend_ctrl)
- rtc_control = CMOS_READ(RTC_CONTROL);
- if (rtc_control & RTC_AIE) {
- cmos_rtc.suspend_ctrl &= ~RTC_AIE;
- CMOS_WRITE(rtc_control, RTC_CONTROL);
- rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
- rtc_update_irq(cmos->rtc, 1, rtc_intr);
- }
- spin_unlock_irqrestore(&rtc_lock, flags);
- }
-
- pm_wakeup_hard_event(dev);
- acpi_clear_event(ACPI_EVENT_RTC);
- acpi_disable_event(ACPI_EVENT_RTC, 0);
- return ACPI_INTERRUPT_HANDLED;
-}
-
-static inline void rtc_wake_setup(struct device *dev)
-{
- if (acpi_disabled)
- return;
-
- acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, dev);
- /*
- * After the RTC handler is installed, the Fixed_RTC event should
- * be disabled. Only when the RTC alarm is set will it be enabled.
- */
- acpi_clear_event(ACPI_EVENT_RTC);
- acpi_disable_event(ACPI_EVENT_RTC, 0);
-}
-
-static void rtc_wake_on(struct device *dev)
-{
- acpi_clear_event(ACPI_EVENT_RTC);
- acpi_enable_event(ACPI_EVENT_RTC, 0);
-}
-
-static void rtc_wake_off(struct device *dev)
-{
- acpi_disable_event(ACPI_EVENT_RTC, 0);
-}
-
-#ifdef CONFIG_X86
-/* Enable use_acpi_alarm mode for Intel platforms no earlier than 2015 */
-static void use_acpi_alarm_quirks(void)
-{
- if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
- return;
-
- if (!is_hpet_enabled())
- return;
-
- if (dmi_get_bios_year() < 2015)
- return;
-
- use_acpi_alarm = true;
-}
-#else
-static inline void use_acpi_alarm_quirks(void) { }
-#endif
-
-static void cmos_wake_setup(struct device *dev)
-{
- if (acpi_disabled)
- return;
-
- use_acpi_alarm_quirks();
-
- cmos_rtc.wake_on = rtc_wake_on;
- cmos_rtc.wake_off = rtc_wake_off;
-
- /* ACPI tables bug workaround. */
- if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
- dev_dbg(dev, "bogus FADT month_alarm (%d)\n",
- acpi_gbl_FADT.month_alarm);
- acpi_gbl_FADT.month_alarm = 0;
- }
-
- cmos_rtc.day_alrm = acpi_gbl_FADT.day_alarm;
- cmos_rtc.mon_alrm = acpi_gbl_FADT.month_alarm;
- cmos_rtc.century = acpi_gbl_FADT.century;
-
- if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
- dev_info(dev, "RTC can wake from S4\n");
-
- /* RTC always wakes from S1/S2/S3, and often S4/STD */
- device_init_wakeup(dev, 1);
-}
-
-static void cmos_check_acpi_rtc_status(struct device *dev,
- unsigned char *rtc_control)
-{
- struct cmos_rtc *cmos = dev_get_drvdata(dev);
- acpi_event_status rtc_status;
- acpi_status status;
-
- if (acpi_gbl_FADT.flags & ACPI_FADT_FIXED_RTC)
- return;
-
- status = acpi_get_event_status(ACPI_EVENT_RTC, &rtc_status);
- if (ACPI_FAILURE(status)) {
- dev_err(dev, "Could not get RTC status\n");
- } else if (rtc_status & ACPI_EVENT_FLAG_SET) {
- unsigned char mask;
- *rtc_control &= ~RTC_AIE;
- CMOS_WRITE(*rtc_control, RTC_CONTROL);
- mask = CMOS_READ(RTC_INTR_FLAGS);
- rtc_update_irq(cmos->rtc, 1, mask);
- }
-}
-
-#else
-
-static void cmos_wake_setup(struct device *dev)
-{
-}
-
-static void cmos_check_acpi_rtc_status(struct device *dev,
- unsigned char *rtc_control)
-{
-}
-
-static void rtc_wake_setup(struct device *dev)
-{
-}
-#endif
-
#ifdef CONFIG_PNP
#include <linux/pnp.h>
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 545/731] rtc: cmos: Rename ACPI-related functions
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (543 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 544/731] rtc: cmos: Eliminate forward declarations of some functions Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 546/731] rtc: cmos: Disable ACPI RTC event on removal Greg Kroah-Hartman
` (196 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rafael J. Wysocki, Zhang Rui,
Andy Shevchenko, Alexandre Belloni, Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit d13e9ad9f5146f066a5c5a1cc993d09e4fb21ead ]
The names of rtc_wake_setup() and cmos_wake_setup() don't indicate
that these functions are ACPI-related, which is the case, and the
former doesn't really reflect the role of the function.
Rename them to acpi_rtc_event_setup() and acpi_cmos_wake_setup(),
respectively, to address this shortcoming.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/3225614.44csPzL39Z@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-cmos.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 2a21d8281aa6..039486bfedf4 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -784,7 +784,7 @@ static u32 rtc_handler(void *context)
return ACPI_INTERRUPT_HANDLED;
}
-static void rtc_wake_setup(struct device *dev)
+static void acpi_rtc_event_setup(struct device *dev)
{
if (acpi_disabled)
return;
@@ -828,7 +828,7 @@ static void use_acpi_alarm_quirks(void)
static inline void use_acpi_alarm_quirks(void) { }
#endif
-static void cmos_wake_setup(struct device *dev)
+static void acpi_cmos_wake_setup(struct device *dev)
{
if (acpi_disabled)
return;
@@ -880,11 +880,11 @@ static void cmos_check_acpi_rtc_status(struct device *dev,
#else /* !CONFIG_ACPI */
-static inline void rtc_wake_setup(struct device *dev)
+static inline void acpi_rtc_event_setup(struct device *dev)
{
}
-static inline void cmos_wake_setup(struct device *dev)
+static inline void acpi_cmos_wake_setup(struct device *dev)
{
}
@@ -986,7 +986,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
cmos_rtc.wake_off = info->wake_off;
}
} else {
- cmos_wake_setup(dev);
+ acpi_cmos_wake_setup(dev);
}
if (cmos_rtc.day_alrm >= 128)
@@ -1091,7 +1091,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
* the ACPI RTC fixed event.
*/
if (!info)
- rtc_wake_setup(dev);
+ acpi_rtc_event_setup(dev);
dev_info(dev, "%s%s, %d bytes nvram%s\n",
!is_valid_irq(rtc_irq) ? "no alarms" :
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 546/731] rtc: cmos: Disable ACPI RTC event on removal
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (544 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 545/731] rtc: cmos: Rename ACPI-related functions Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 547/731] rtc: snvs: Allow a time difference on clock register read Greg Kroah-Hartman
` (195 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rafael J. Wysocki, Zhang Rui,
Andy Shevchenko, Alexandre Belloni, Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit 83ebb7b3036d151ee39a4a752018665648fc3bd4 ]
Make cmos_do_remove() drop the ACPI RTC fixed event handler so as to
prevent it from operating on stale data in case the event triggers
after driver removal.
Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/2224609.iZASKD2KPV@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-cmos.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 039486bfedf4..00e2ca7374ec 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -798,6 +798,14 @@ static void acpi_rtc_event_setup(struct device *dev)
acpi_disable_event(ACPI_EVENT_RTC, 0);
}
+static void acpi_rtc_event_cleanup(void)
+{
+ if (acpi_disabled)
+ return;
+
+ acpi_remove_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler);
+}
+
static void rtc_wake_on(struct device *dev)
{
acpi_clear_event(ACPI_EVENT_RTC);
@@ -884,6 +892,10 @@ static inline void acpi_rtc_event_setup(struct device *dev)
{
}
+static inline void acpi_rtc_event_cleanup(void)
+{
+}
+
static inline void acpi_cmos_wake_setup(struct device *dev)
{
}
@@ -1138,6 +1150,9 @@ static void cmos_do_remove(struct device *dev)
hpet_unregister_irq_handler(cmos_interrupt);
}
+ if (!dev_get_platdata(dev))
+ acpi_rtc_event_cleanup();
+
cmos->rtc = NULL;
ports = cmos->iomem;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 547/731] rtc: snvs: Allow a time difference on clock register read
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (545 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 546/731] rtc: cmos: Disable ACPI RTC event on removal Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 548/731] rtc: pcf85063: Fix reading alarm Greg Kroah-Hartman
` (194 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Francesco Dolcini,
Stefan Eichenberger, Francesco Dolcini, Alexandre Belloni,
Sasha Levin
From: Stefan Eichenberger <stefan.eichenberger@toradex.com>
[ Upstream commit 0462681e207ccc44778a77b3297af728b1cf5b9f ]
On an iMX6ULL the following message appears when a wakealarm is set:
echo 0 > /sys/class/rtc/rtc1/wakealarm
rtc rtc1: Timeout trying to get valid LPSRT Counter read
This does not always happen but is reproducible quite often (7 out of 10
times). The problem appears because the iMX6ULL is not able to read the
registers within one 32kHz clock cycle which is the base clock of the
RTC. Therefore, this patch allows a difference of up to 320 cycles
(10ms). 10ms was chosen to be big enough even on systems with less cpu
power (e.g. iMX6ULL). According to the reference manual a difference is
fine:
- If the two consecutive reads are similar, the value is correct.
The values have to be similar, not equal.
Fixes: cd7f3a249dbe ("rtc: snvs: Add timeouts to avoid kernel lockups")
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco@dolcini.it>
Link: https://lore.kernel.org/r/20221106115915.7930-1-francesco@dolcini.it
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-snvs.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
index bd929b0e7d7d..d82acf1af1fa 100644
--- a/drivers/rtc/rtc-snvs.c
+++ b/drivers/rtc/rtc-snvs.c
@@ -32,6 +32,14 @@
#define SNVS_LPPGDR_INIT 0x41736166
#define CNTR_TO_SECS_SH 15
+/* The maximum RTC clock cycles that are allowed to pass between two
+ * consecutive clock counter register reads. If the values are corrupted a
+ * bigger difference is expected. The RTC frequency is 32kHz. With 320 cycles
+ * we end at 10ms which should be enough for most cases. If it once takes
+ * longer than expected we do a retry.
+ */
+#define MAX_RTC_READ_DIFF_CYCLES 320
+
struct snvs_rtc_data {
struct rtc_device *rtc;
struct regmap *regmap;
@@ -56,6 +64,7 @@ static u64 rtc_read_lpsrt(struct snvs_rtc_data *data)
static u32 rtc_read_lp_counter(struct snvs_rtc_data *data)
{
u64 read1, read2;
+ s64 diff;
unsigned int timeout = 100;
/* As expected, the registers might update between the read of the LSB
@@ -66,7 +75,8 @@ static u32 rtc_read_lp_counter(struct snvs_rtc_data *data)
do {
read2 = read1;
read1 = rtc_read_lpsrt(data);
- } while (read1 != read2 && --timeout);
+ diff = read1 - read2;
+ } while (((diff < 0) || (diff > MAX_RTC_READ_DIFF_CYCLES)) && --timeout);
if (!timeout)
dev_err(&data->rtc->dev, "Timeout trying to get valid LPSRT Counter read\n");
@@ -78,13 +88,15 @@ static u32 rtc_read_lp_counter(struct snvs_rtc_data *data)
static int rtc_read_lp_counter_lsb(struct snvs_rtc_data *data, u32 *lsb)
{
u32 count1, count2;
+ s32 diff;
unsigned int timeout = 100;
regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &count1);
do {
count2 = count1;
regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &count1);
- } while (count1 != count2 && --timeout);
+ diff = count1 - count2;
+ } while (((diff < 0) || (diff > MAX_RTC_READ_DIFF_CYCLES)) && --timeout);
if (!timeout) {
dev_err(&data->rtc->dev, "Timeout trying to get valid LPSRT Counter read\n");
return -ETIMEDOUT;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 548/731] rtc: pcf85063: Fix reading alarm
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (546 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 547/731] rtc: snvs: Allow a time difference on clock register read Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 549/731] iommu/amd: Fix pci device refcount leak in ppr_notifier() Greg Kroah-Hartman
` (193 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexander Stein, Alexandre Belloni,
Sasha Levin
From: Alexander Stein <alexander.stein@ew.tq-group.com>
[ Upstream commit a6ceee26fd5ed9b5bd37322b1ca88e4548cee4a3 ]
If the alarms are disabled the topmost bit (AEN_*) is set in the alarm
registers. This is also interpreted in BCD number leading to this warning:
rtc rtc0: invalid alarm value: 2022-09-21T80:80:80
Fix this by masking alarm enabling and reserved bits.
Fixes: 05cb3a56ee8c ("rtc: pcf85063: add alarm support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220921074141.3903104-1-alexander.stein@ew.tq-group.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-pcf85063.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index 14da4ab30104..3e2837722667 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -167,10 +167,10 @@ static int pcf85063_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
if (ret)
return ret;
- alrm->time.tm_sec = bcd2bin(buf[0]);
- alrm->time.tm_min = bcd2bin(buf[1]);
- alrm->time.tm_hour = bcd2bin(buf[2]);
- alrm->time.tm_mday = bcd2bin(buf[3]);
+ alrm->time.tm_sec = bcd2bin(buf[0] & 0x7f);
+ alrm->time.tm_min = bcd2bin(buf[1] & 0x7f);
+ alrm->time.tm_hour = bcd2bin(buf[2] & 0x3f);
+ alrm->time.tm_mday = bcd2bin(buf[3] & 0x3f);
ret = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &val);
if (ret)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 549/731] iommu/amd: Fix pci device refcount leak in ppr_notifier()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (547 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 548/731] rtc: pcf85063: Fix reading alarm Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 550/731] iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe() Greg Kroah-Hartman
` (192 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Joerg Roedel, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 6cf0981c2233f97d56938d9d61845383d6eb227c ]
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it before returning from ppr_notifier()
to avoid refcount leak.
Fixes: daae2d25a477 ("iommu/amd: Don't copy GCR3 table root pointer")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221118093604.216371-1-yangyingliang@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/amd/iommu_v2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/iommu/amd/iommu_v2.c b/drivers/iommu/amd/iommu_v2.c
index a45c5536d250..c96cf9b21719 100644
--- a/drivers/iommu/amd/iommu_v2.c
+++ b/drivers/iommu/amd/iommu_v2.c
@@ -588,6 +588,7 @@ static int ppr_notifier(struct notifier_block *nb, unsigned long e, void *data)
put_device_state(dev_state);
out:
+ pci_dev_put(pdev);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 550/731] iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (548 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 549/731] iommu/amd: Fix pci device refcount leak in ppr_notifier() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 551/731] macintosh: fix possible memory leak in macio_add_one_device() Greg Kroah-Hartman
` (191 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yuan Can, Joerg Roedel, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 73f5fc5f884ad0c5f7d57f66303af64f9f002526 ]
The fsl_pamu_probe() returns directly when create_csd() failed, leaving
irq and memories unreleased.
Fix by jumping to error if create_csd() returns error.
Fixes: 695093e38c3e ("iommu/fsl: Freescale PAMU driver and iommu implementation.")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221121082022.19091-1-yuancan@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/fsl_pamu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
index fc38b1fba7cf..bb5d253188a1 100644
--- a/drivers/iommu/fsl_pamu.c
+++ b/drivers/iommu/fsl_pamu.c
@@ -865,7 +865,7 @@ static int fsl_pamu_probe(struct platform_device *pdev)
ret = create_csd(ppaact_phys, mem_size, csd_port_id);
if (ret) {
dev_err(dev, "could not create coherence subdomain\n");
- return ret;
+ goto error;
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 551/731] macintosh: fix possible memory leak in macio_add_one_device()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (549 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 550/731] iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 552/731] macintosh/macio-adb: check the return value of ioremap() Greg Kroah-Hartman
` (190 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Michael Ellerman,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 5ca86eae55a2f006e6c1edd2029b2cacb6979515 ]
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically. It
needs to be freed when of_device_register() fails. Call put_device() to
give up the reference that's taken in device_initialize(), so that it
can be freed in kobject_cleanup() when the refcount hits 0.
macio device is freed in macio_release_dev(), so the kfree() can be
removed.
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221104032551.1075335-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/macintosh/macio_asic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index c1fdf2896021..df69d648f6d0 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -423,7 +423,7 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
if (of_device_register(&dev->ofdev) != 0) {
printk(KERN_DEBUG"macio: device registration error for %s!\n",
dev_name(&dev->ofdev.dev));
- kfree(dev);
+ put_device(&dev->ofdev.dev);
return NULL;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 552/731] macintosh/macio-adb: check the return value of ioremap()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (550 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 551/731] macintosh: fix possible memory leak in macio_add_one_device() Greg Kroah-Hartman
@ 2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 553/731] powerpc/52xx: Fix a resource leak in an error handling path Greg Kroah-Hartman
` (189 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:40 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hacash Robot, Xie Shaowen,
Michael Ellerman, Sasha Levin
From: Xie Shaowen <studentxswpy@163.com>
[ Upstream commit dbaa3105736d4d73063ea0a3b01cd7fafce924e6 ]
The function ioremap() in macio_init() can fail, so its return value
should be checked.
Fixes: 36874579dbf4c ("[PATCH] powerpc: macio-adb build fix")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: Xie Shaowen <studentxswpy@163.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220802074148.3213659-1-studentxswpy@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/macintosh/macio-adb.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/macintosh/macio-adb.c b/drivers/macintosh/macio-adb.c
index dc634c2932fd..dd2465586140 100644
--- a/drivers/macintosh/macio-adb.c
+++ b/drivers/macintosh/macio-adb.c
@@ -105,6 +105,10 @@ int macio_init(void)
return -ENXIO;
}
adb = ioremap(r.start, sizeof(struct adb_regs));
+ if (!adb) {
+ of_node_put(adbs);
+ return -ENOMEM;
+ }
out_8(&adb->ctrl.r, 0);
out_8(&adb->intr.r, 0);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 553/731] powerpc/52xx: Fix a resource leak in an error handling path
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (551 preceding siblings ...)
2022-12-28 14:40 ` [PATCH 5.15 552/731] macintosh/macio-adb: check the return value of ioremap() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 554/731] cxl: Fix refcount leak in cxl_calc_capp_routing Greg Kroah-Hartman
` (188 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christophe JAILLET,
Michael Ellerman, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit 5836947613ef33d311b4eff6a32d019580a214f5 ]
The error handling path of mpc52xx_lpbfifo_probe() has a request_irq()
that is not balanced by a corresponding free_irq().
Add the missing call, as already done in the remove function.
Fixes: 3c9059d79f5e ("powerpc/5200: add LocalPlus bus FIFO device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dec1496d46ccd5311d0f6e9f9ca4238be11bf6a6.1643440531.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index b91ebebd9ff2..e0049b7df212 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -530,6 +530,7 @@ static int mpc52xx_lpbfifo_probe(struct platform_device *op)
err_bcom_rx_irq:
bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task);
err_bcom_rx:
+ free_irq(lpbfifo.irq, &lpbfifo);
err_irq:
iounmap(lpbfifo.regs);
lpbfifo.regs = NULL;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 554/731] cxl: Fix refcount leak in cxl_calc_capp_routing
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (552 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 553/731] powerpc/52xx: Fix a resource leak in an error handling path Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 555/731] powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds Greg Kroah-Hartman
` (187 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miaoqian Lin, Andrew Donnellan,
Frederic Barrat, Michael Ellerman, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit 1d09697ff22908ae487fc8c4fbde1811732be523 ]
of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
This function only calls of_node_put() in normal path,
missing it in the error path.
Add missing of_node_put() to avoid refcount leak.
Fixes: f24be42aab37 ("cxl: Add psl9 specific code")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605060038.62217-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/cxl/pci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 0ac3f4cb88ac..d183836d80e3 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -387,6 +387,7 @@ int cxl_calc_capp_routing(struct pci_dev *dev, u64 *chipid,
rc = get_phb_index(np, phb_index);
if (rc) {
pr_err("cxl: invalid phb index\n");
+ of_node_put(np);
return rc;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 555/731] powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (553 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 554/731] cxl: Fix refcount leak in cxl_calc_capp_routing Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 556/731] powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data() Greg Kroah-Hartman
` (186 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gustavo A. R. Silva, Kees Cook,
Michael Ellerman, Sasha Levin
From: Gustavo A. R. Silva <gustavoars@kernel.org>
[ Upstream commit 1c4a4a4c8410be4a231a58b23e7a30923ff954ac ]
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:
arch/powerpc/xmon/xmon.c: In function ‘bpt_cmds’:
arch/powerpc/xmon/xmon.c:1529:13: warning: statement will never be executed [-Wswitch-unreachable]
1529 | int mode;
| ^~~~
Fixes: 09b6c1129f89 ("powerpc/xmon: Fix compile error with PPC_8xx=y")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YySE6FHiOcbWWR+9@work
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/xmon/xmon.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 8b28ff9d98d1..3c085e1e5232 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -1528,9 +1528,9 @@ bpt_cmds(void)
cmd = inchar();
switch (cmd) {
- static const char badaddr[] = "Only kernel addresses are permitted for breakpoints\n";
- int mode;
- case 'd': /* bd - hardware data breakpoint */
+ case 'd': { /* bd - hardware data breakpoint */
+ static const char badaddr[] = "Only kernel addresses are permitted for breakpoints\n";
+ int mode;
if (xmon_is_ro) {
printf(xmon_ro_msg);
break;
@@ -1563,6 +1563,7 @@ bpt_cmds(void)
force_enable_xmon();
break;
+ }
case 'i': /* bi - hardware instr breakpoint */
if (xmon_is_ro) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 556/731] powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (554 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 555/731] powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 557/731] phy: qcom-qmp: create copies of QMP PHY driver Greg Kroah-Hartman
` (185 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang,
Cédric Le Goater, Michael Ellerman, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 8b49670f3bb3f10cd4d5a6dca17f5a31b173ecdc ]
If remapping 'data->trig_page' fails, the 'data->eoi_mmio' need be unmapped
before returning from xive_spapr_populate_irq_data().
Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221017032333.1852406-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/sysdev/xive/spapr.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/sysdev/xive/spapr.c b/arch/powerpc/sysdev/xive/spapr.c
index 2bf78a30238b..43bd2579d942 100644
--- a/arch/powerpc/sysdev/xive/spapr.c
+++ b/arch/powerpc/sysdev/xive/spapr.c
@@ -437,6 +437,7 @@ static int xive_spapr_populate_irq_data(u32 hw_irq, struct xive_irq_data *data)
data->trig_mmio = ioremap(data->trig_page, 1u << data->esb_shift);
if (!data->trig_mmio) {
+ iounmap(data->eoi_mmio);
pr_err("Failed to map trigger page for irq 0x%x\n", hw_irq);
return -ENOMEM;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 557/731] phy: qcom-qmp: create copies of QMP PHY driver
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (555 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 556/731] powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 16:49 ` Vinod Koul
2022-12-28 14:41 ` [PATCH 5.15 558/731] powerpc/perf: callchain validate kernel stack pointer bounds Greg Kroah-Hartman
` (184 subsequent siblings)
741 siblings, 1 reply; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bjorn Andersson, Dmitry Baryshkov,
Vinod Koul, Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 94a407cc17a445ddb3f7315cee0b0916d35d177c ]
In order to split and cleanup the single monstrous QMP PHY driver,
create blind copies of the current file. They will be used for:
- PCIe (and a separate msm8996 PCIe PHY driver)
- UFS
- USB
- Combo DP + USB
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: c7b98de745cf ("phy: qcom-qmp-combo: fix runtime suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 6350 +++++++++++++++++
.../phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 6350 +++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 6350 +++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 6350 +++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 6350 +++++++++++++++++
5 files changed, 31750 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-combo.c
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-usb.c
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
new file mode 100644
index 000000000000..c7309e981bfb
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -0,0 +1,6350 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#include "phy-qcom-qmp.h"
+
+/* QPHY_SW_RESET bit */
+#define SW_RESET BIT(0)
+/* QPHY_POWER_DOWN_CONTROL */
+#define SW_PWRDN BIT(0)
+#define REFCLK_DRV_DSBL BIT(1)
+/* QPHY_START_CONTROL bits */
+#define SERDES_START BIT(0)
+#define PCS_START BIT(1)
+#define PLL_READY_GATE_EN BIT(3)
+/* QPHY_PCS_STATUS bit */
+#define PHYSTATUS BIT(6)
+#define PHYSTATUS_4_20 BIT(7)
+/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
+#define PCS_READY BIT(0)
+
+/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
+/* DP PHY soft reset */
+#define SW_DPPHY_RESET BIT(0)
+/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
+#define SW_DPPHY_RESET_MUX BIT(1)
+/* USB3 PHY soft reset */
+#define SW_USB3PHY_RESET BIT(2)
+/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
+#define SW_USB3PHY_RESET_MUX BIT(3)
+
+/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
+#define USB3_MODE BIT(0) /* enables USB3 mode */
+#define DP_MODE BIT(1) /* enables DP mode */
+
+/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
+#define ARCVR_DTCT_EN BIT(0)
+#define ALFPS_DTCT_EN BIT(1)
+#define ARCVR_DTCT_EVENT_SEL BIT(4)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
+#define IRQ_CLEAR BIT(0)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
+#define RCVR_DETECT BIT(0)
+
+/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
+#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
+
+#define PHY_INIT_COMPLETE_TIMEOUT 10000
+#define POWER_DOWN_DELAY_US_MIN 10
+#define POWER_DOWN_DELAY_US_MAX 11
+
+#define MAX_PROP_NAME 32
+
+/* Define the assumed distance between lanes for underspecified device trees. */
+#define QMP_PHY_LEGACY_LANE_STRIDE 0x400
+
+struct qmp_phy_init_tbl {
+ unsigned int offset;
+ unsigned int val;
+ /*
+ * register part of layout ?
+ * if yes, then offset gives index in the reg-layout
+ */
+ bool in_layout;
+ /*
+ * mask of lanes for which this register is written
+ * for cases when second lane needs different values
+ */
+ u8 lane_mask;
+};
+
+#define QMP_PHY_INIT_CFG(o, v) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .lane_mask = 0xff, \
+ }
+
+#define QMP_PHY_INIT_CFG_L(o, v) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .in_layout = true, \
+ .lane_mask = 0xff, \
+ }
+
+#define QMP_PHY_INIT_CFG_LANE(o, v, l) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .lane_mask = l, \
+ }
+
+/* set of registers with offsets different per-PHY */
+enum qphy_reg_layout {
+ /* Common block control registers */
+ QPHY_COM_SW_RESET,
+ QPHY_COM_POWER_DOWN_CONTROL,
+ QPHY_COM_START_CONTROL,
+ QPHY_COM_PCS_READY_STATUS,
+ /* PCS registers */
+ QPHY_PLL_LOCK_CHK_DLY_TIME,
+ QPHY_FLL_CNTRL1,
+ QPHY_FLL_CNTRL2,
+ QPHY_FLL_CNT_VAL_L,
+ QPHY_FLL_CNT_VAL_H_TOL,
+ QPHY_FLL_MAN_CODE,
+ QPHY_SW_RESET,
+ QPHY_START_CTRL,
+ QPHY_PCS_READY_STATUS,
+ QPHY_PCS_STATUS,
+ QPHY_PCS_AUTONOMOUS_MODE_CTRL,
+ QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
+ QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
+ QPHY_PCS_POWER_DOWN_CONTROL,
+ /* PCS_MISC registers */
+ QPHY_PCS_MISC_TYPEC_CTRL,
+ /* Keep last to ensure regs_layout arrays are properly initialized */
+ QPHY_LAYOUT_SIZE
+};
+
+static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
+static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+};
+
+static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_COM_SW_RESET] = 0x400,
+ [QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
+ [QPHY_COM_START_CONTROL] = 0x408,
+ [QPHY_COM_PCS_READY_STATUS] = 0x448,
+ [QPHY_PLL_LOCK_CHK_DLY_TIME] = 0xa8,
+ [QPHY_FLL_CNTRL1] = 0xc4,
+ [QPHY_FLL_CNTRL2] = 0xc8,
+ [QPHY_FLL_CNT_VAL_L] = 0xcc,
+ [QPHY_FLL_CNT_VAL_H_TOL] = 0xd0,
+ [QPHY_FLL_MAN_CODE] = 0xd4,
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+};
+
+static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_FLL_CNTRL1] = 0xc0,
+ [QPHY_FLL_CNTRL2] = 0xc4,
+ [QPHY_FLL_CNT_VAL_L] = 0xc8,
+ [QPHY_FLL_CNT_VAL_H_TOL] = 0xcc,
+ [QPHY_FLL_MAN_CODE] = 0xd0,
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x17c,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
+};
+
+static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
+};
+
+static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+};
+
+static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x2ac,
+};
+
+static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
+};
+
+static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
+};
+
+static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x1008,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
+};
+
+static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
+ [QPHY_PCS_STATUS] = 0x174,
+ [QPHY_PCS_MISC_TYPEC_CTRL] = 0x00,
+};
+
+static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x160,
+};
+
+static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
+static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+};
+
+static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = QPHY_V4_PCS_UFS_PHY_START,
+ [QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_UFS_READY_STATUS,
+ [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET,
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ /* PLL and Loop filter settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ /* SSC settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c),
+ QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+
+ QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05),
+
+ QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05),
+ QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04),
+ /* PLL and Loop filter settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ /* SSC settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x29),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x53),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x61),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_EQ_CONFIG5, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+ QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
+ QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_POST, 0x58),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
+ QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
+ QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
+ QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
+ QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
+ QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x007),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_01, 0x59),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xbb),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG4, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2, 0x52),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4, 0x1a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5, 0x06),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SYSCLK_EN_SEL, 0x27),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BIAS_EN_CKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_ENABLE1, 0xb0),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE0, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_RESTRIM_CTRL2, 0x05),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VCO_TUNE_MAP, 0x10),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_SELECT, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_HSCLK_SEL1, 0x30),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORE_CLK_EN, 0x73),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SVS_MODE_CLK_SEL, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV1, 0x22),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV2, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BGV_TRIM, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BG_CTRL, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL0, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_TAP_EN, 0x0d),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TX_BAND_MODE, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_LANE_MODE, 0x1a),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PARALLEL_RATE, 0x2f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE0, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE1, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE2, 0x1b),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE2, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE0, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE1, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE2, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_THRESH_DFE, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CGA_THRESH_DFE, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXENGINE_EN0, 0x12),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_TRAIN_TIME, 0x25),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_DFE_OVRLP_TIME, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_REFRESH_TIME, 0x05),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_ENABLE_TIME, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_GAIN, 0x26),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_GAIN, 0x12),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_OFFSET_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PRE_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_INTVAL, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EDAC_INITVAL, 0x28),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB0, 0x7f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB1, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RCVRDONE_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_CTRL, 0x70),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE0, 0x8b),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE2, 0x0a),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE2, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_BAND, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE0, 0x5c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE1, 0x3e),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE2, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_ENABLES, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_CNTRL, 0xa0),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_DEGLITCH_CNTRL, 0x08),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DCC_GAIN, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_EN_SIGNAL, 0xc3),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PSM_RX_EN_CAL, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_MISC_CNTRL0, 0xbc),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TS0_TIMER, 0x7f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DLL_HIGHDATARATE, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RESETCODE_OFFSET, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_INITVAL, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RSM_START, 0x01),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_rx_tbl[] = {
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_PCS_TX_RX_CONFIG, 0x50),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M3P5DB, 0x19),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M3P5DB, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M6DB, 0x17),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M6DB, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG5, 0x9f),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x50),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb5),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4c),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x64),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x0F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x1E),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0D),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5B),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_RX_PWM_GEAR_BAND, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_DRV_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),
+ QMP_PHY_INIT_CFG(QPHY_RX_SYM_RESYNC_CTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_POST_EMP_LVL, 0x12),
+ QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_POST_EMP_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL2, 0x6e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SYM_RESYNC_CTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL1, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_MIN_HIBERN8_TIME, 0x9a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
+
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x94),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x5),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x6e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x39),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x39),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x01),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x35),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x12),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P6_P7_PRE, 0x33),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_EQ_CONFIG2, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x05),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG2, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x08),
+};
+
+static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x26),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x048),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x46),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_CFG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x50),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MISC1, 0x88),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTERNAL_DIG_CORECLK_DIV, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MODE, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_DC_LEVEL_CTRL, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x56),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x22),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_3, 0x13),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_VMODE_CTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_PI_QEC_CTRL, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_FO_GAIN_RATE2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_3, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_VGA_CAL_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x27),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B0, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B1, 0xf9),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B3, 0xce),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B4, 0x62),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B0, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B3, 0xcf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B4, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_PHPRE_CTRL, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_MARG_COARSE_CTRL2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG2, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG4, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG5, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_EQ_CONFIG1, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G3_RXEQEVAL_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_RXEQEVAL_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG2, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0b),
+};
+
+static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x65),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xf5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf1),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xed),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x3c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xb7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0xb7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_INITVAL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x01),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_EQ_CONFIG2, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x46),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_CFG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0xd0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MISC1, 0x88),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_DC_LEVEL_CTRL, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xcc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xcc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x29),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0xc5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xad),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xb6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xc7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xef),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x05),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
+};
+
+/* Register names should be validated, they might be different for this PHY */
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_EQ_CONFIG1, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3, 0x28),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
+};
+
+struct qmp_phy;
+
+/* struct qmp_phy_cfg - per-PHY initialization config */
+struct qmp_phy_cfg {
+ /* phy-type - PCIE/UFS/USB */
+ unsigned int type;
+ /* number of lanes provided by phy */
+ int nlanes;
+
+ /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
+ const struct qmp_phy_init_tbl *serdes_tbl;
+ int serdes_tbl_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_sec;
+ int serdes_tbl_num_sec;
+ const struct qmp_phy_init_tbl *tx_tbl;
+ int tx_tbl_num;
+ const struct qmp_phy_init_tbl *tx_tbl_sec;
+ int tx_tbl_num_sec;
+ const struct qmp_phy_init_tbl *rx_tbl;
+ int rx_tbl_num;
+ const struct qmp_phy_init_tbl *rx_tbl_sec;
+ int rx_tbl_num_sec;
+ const struct qmp_phy_init_tbl *pcs_tbl;
+ int pcs_tbl_num;
+ const struct qmp_phy_init_tbl *pcs_tbl_sec;
+ int pcs_tbl_num_sec;
+ const struct qmp_phy_init_tbl *pcs_misc_tbl;
+ int pcs_misc_tbl_num;
+ const struct qmp_phy_init_tbl *pcs_misc_tbl_sec;
+ int pcs_misc_tbl_num_sec;
+
+ /* Init sequence for DP PHY block link rates */
+ const struct qmp_phy_init_tbl *serdes_tbl_rbr;
+ int serdes_tbl_rbr_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr;
+ int serdes_tbl_hbr_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr2;
+ int serdes_tbl_hbr2_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
+ int serdes_tbl_hbr3_num;
+
+ /* DP PHY callbacks */
+ int (*configure_dp_phy)(struct qmp_phy *qphy);
+ void (*configure_dp_tx)(struct qmp_phy *qphy);
+ int (*calibrate_dp_phy)(struct qmp_phy *qphy);
+ void (*dp_aux_init)(struct qmp_phy *qphy);
+
+ /* clock ids to be requested */
+ const char * const *clk_list;
+ int num_clks;
+ /* resets to be requested */
+ const char * const *reset_list;
+ int num_resets;
+ /* regulators to be requested */
+ const char * const *vreg_list;
+ int num_vregs;
+
+ /* array of registers with different offsets */
+ const unsigned int *regs;
+
+ unsigned int start_ctrl;
+ unsigned int pwrdn_ctrl;
+ unsigned int mask_com_pcs_ready;
+ /* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
+ unsigned int phy_status;
+
+ /* true, if PHY has a separate PHY_COM control block */
+ bool has_phy_com_ctrl;
+ /* true, if PHY has a reset for individual lanes */
+ bool has_lane_rst;
+ /* true, if PHY needs delay after POWER_DOWN */
+ bool has_pwrdn_delay;
+ /* power_down delay in usec */
+ int pwrdn_delay_min;
+ int pwrdn_delay_max;
+
+ /* true, if PHY has a separate DP_COM control block */
+ bool has_phy_dp_com_ctrl;
+ /* true, if PHY has secondary tx/rx lanes to be configured */
+ bool is_dual_lane_phy;
+
+ /* true, if PCS block has no separate SW_RESET register */
+ bool no_pcs_sw_reset;
+};
+
+struct qmp_phy_combo_cfg {
+ const struct qmp_phy_cfg *usb_cfg;
+ const struct qmp_phy_cfg *dp_cfg;
+};
+
+/**
+ * struct qmp_phy - per-lane phy descriptor
+ *
+ * @phy: generic phy
+ * @cfg: phy specific configuration
+ * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
+ * @tx: iomapped memory space for lane's tx
+ * @rx: iomapped memory space for lane's rx
+ * @pcs: iomapped memory space for lane's pcs
+ * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
+ * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
+ * @pcs_misc: iomapped memory space for lane's pcs_misc
+ * @pipe_clk: pipe clock
+ * @index: lane index
+ * @qmp: QMP phy to which this lane belongs
+ * @lane_rst: lane's reset controller
+ * @mode: current PHY mode
+ * @dp_aux_cfg: Display port aux config
+ * @dp_opts: Display port optional config
+ * @dp_clks: Display port clocks
+ */
+struct qmp_phy {
+ struct phy *phy;
+ const struct qmp_phy_cfg *cfg;
+ void __iomem *serdes;
+ void __iomem *tx;
+ void __iomem *rx;
+ void __iomem *pcs;
+ void __iomem *tx2;
+ void __iomem *rx2;
+ void __iomem *pcs_misc;
+ struct clk *pipe_clk;
+ unsigned int index;
+ struct qcom_qmp *qmp;
+ struct reset_control *lane_rst;
+ enum phy_mode mode;
+ unsigned int dp_aux_cfg;
+ struct phy_configure_opts_dp dp_opts;
+ struct qmp_phy_dp_clks *dp_clks;
+};
+
+struct qmp_phy_dp_clks {
+ struct qmp_phy *qphy;
+ struct clk_hw dp_link_hw;
+ struct clk_hw dp_pixel_hw;
+};
+
+/**
+ * struct qcom_qmp - structure holding QMP phy block attributes
+ *
+ * @dev: device
+ * @dp_com: iomapped memory space for phy's dp_com control block
+ *
+ * @clks: array of clocks required by phy
+ * @resets: array of resets required by phy
+ * @vregs: regulator supplies bulk data
+ *
+ * @phys: array of per-lane phy descriptors
+ * @phy_mutex: mutex lock for PHY common block initialization
+ * @init_count: phy common block initialization count
+ * @ufs_reset: optional UFS PHY reset handle
+ */
+struct qcom_qmp {
+ struct device *dev;
+ void __iomem *dp_com;
+
+ struct clk_bulk_data *clks;
+ struct reset_control **resets;
+ struct regulator_bulk_data *vregs;
+
+ struct qmp_phy **phys;
+
+ struct mutex phy_mutex;
+ int init_count;
+
+ struct reset_control *ufs_reset;
+};
+
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
+
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
+
+static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg |= val;
+ writel(reg, base + offset);
+
+ /* ensure that above write is through */
+ readl(base + offset);
+}
+
+static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg &= ~val;
+ writel(reg, base + offset);
+
+ /* ensure that above write is through */
+ readl(base + offset);
+}
+
+/* list of clocks required by phy */
+static const char * const msm8996_phy_clk_l[] = {
+ "aux", "cfg_ahb", "ref",
+};
+
+static const char * const msm8996_ufs_phy_clk_l[] = {
+ "ref",
+};
+
+static const char * const qmp_v3_phy_clk_l[] = {
+ "aux", "cfg_ahb", "ref", "com_aux",
+};
+
+static const char * const sdm845_pciephy_clk_l[] = {
+ "aux", "cfg_ahb", "ref", "refgen",
+};
+
+static const char * const qmp_v4_phy_clk_l[] = {
+ "aux", "ref_clk_src", "ref", "com_aux",
+};
+
+/* the primary usb3 phy on sm8250 doesn't have a ref clock */
+static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
+ "aux", "ref_clk_src", "com_aux"
+};
+
+static const char * const sm8450_ufs_phy_clk_l[] = {
+ "qref", "ref", "ref_aux",
+};
+
+static const char * const sdm845_ufs_phy_clk_l[] = {
+ "ref", "ref_aux",
+};
+
+/* usb3 phy on sdx55 doesn't have com_aux clock */
+static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
+ "aux", "cfg_ahb", "ref"
+};
+
+static const char * const qcm2290_usb3phy_clk_l[] = {
+ "cfg_ahb", "ref", "com_aux",
+};
+
+/* list of resets */
+static const char * const msm8996_pciephy_reset_l[] = {
+ "phy", "common", "cfg",
+};
+
+static const char * const msm8996_usb3phy_reset_l[] = {
+ "phy", "common",
+};
+
+static const char * const sc7180_usb3phy_reset_l[] = {
+ "phy",
+};
+
+static const char * const qcm2290_usb3phy_reset_l[] = {
+ "phy_phy", "phy",
+};
+
+static const char * const sdm845_pciephy_reset_l[] = {
+ "phy",
+};
+
+/* list of regulators */
+static const char * const qmp_phy_vreg_l[] = {
+ "vdda-phy", "vdda-pll",
+};
+
+static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
+ .tx_tbl = msm8996_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
+ .rx_tbl = ipq8074_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_usb3_rx_tbl),
+ .pcs_tbl = ipq8074_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+};
+
+static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 3,
+
+ .serdes_tbl = msm8996_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl),
+ .tx_tbl = msm8996_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl),
+ .rx_tbl = msm8996_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl),
+ .pcs_tbl = msm8996_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | PLL_READY_GATE_EN,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .mask_com_pcs_ready = PCS_READY,
+ .phy_status = PHYSTATUS,
+
+ .has_phy_com_ctrl = true,
+ .has_lane_rst = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg msm8996_ufs_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8996_ufs_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes_tbl),
+ .tx_tbl = msm8996_ufs_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx_tbl),
+ .rx_tbl = msm8996_ufs_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx_tbl),
+
+ .clk_list = msm8996_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l),
+
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+
+ .regs = msm8996_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8996_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl),
+ .tx_tbl = msm8996_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
+ .rx_tbl = msm8996_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_usb3_rx_tbl),
+ .pcs_tbl = msm8996_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8996_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+};
+
+static const char * const ipq8074_pciephy_clk_l[] = {
+ "aux", "cfg_ahb",
+};
+/* list of resets */
+static const char * const ipq8074_pciephy_reset_l[] = {
+ "phy", "common",
+};
+
+static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
+ .tx_tbl = ipq8074_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_tx_tbl),
+ .rx_tbl = ipq8074_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
+ .pcs_tbl = ipq8074_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq6018_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
+ .tx_tbl = ipq6018_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq6018_pcie_tx_tbl),
+ .rx_tbl = ipq6018_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
+ .pcs_tbl = ipq6018_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = ipq_pciephy_gen3_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sdm845_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_serdes_tbl),
+ .tx_tbl = sdm845_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_tx_tbl),
+ .rx_tbl = sdm845_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_rx_tbl),
+ .pcs_tbl = sdm845_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sdm845_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_qmp_pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sdm845_qhp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_serdes_tbl),
+ .tx_tbl = sdm845_qhp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_tx_tbl),
+ .rx_tbl = sdm845_qhp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_rx_tbl),
+ .pcs_tbl = sdm845_qhp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_pcs_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_qhp_pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
+ .serdes_tbl_sec = sm8250_qmp_gen3x1_pcie_serdes_tbl,
+ .serdes_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_serdes_tbl),
+ .tx_tbl = sm8250_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
+ .rx_tbl = sm8250_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
+ .rx_tbl_sec = sm8250_qmp_gen3x1_pcie_rx_tbl,
+ .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_rx_tbl),
+ .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
+ .pcs_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_tbl,
+ .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
+ .pcs_misc_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
+ .tx_tbl = sm8250_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
+ .tx_tbl_sec = sm8250_qmp_gen3x2_pcie_tx_tbl,
+ .tx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_tx_tbl),
+ .rx_tbl = sm8250_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
+ .rx_tbl_sec = sm8250_qmp_gen3x2_pcie_rx_tbl,
+ .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_rx_tbl),
+ .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
+ .pcs_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_tbl,
+ .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
+ .pcs_misc_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .tx_tbl = qmp_v3_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
+ .usb_cfg = &sc7180_usb3phy_cfg,
+ .dp_cfg = &sc7180_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sdm845_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
+ .tx_tbl = sdm845_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
+ .rx_tbl = sdm845_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
+ .pcs_tbl = sdm845_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 1,
+
+ .serdes_tbl = sm6115_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
+ .tx_tbl = sm6115_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
+ .rx_tbl = sm6115_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
+ .pcs_tbl = sm6115_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm6115_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .is_dual_lane_phy = false,
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8998_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl),
+ .tx_tbl = msm8998_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8998_pcie_tx_tbl),
+ .rx_tbl = msm8998_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8998_pcie_rx_tbl),
+ .pcs_tbl = msm8998_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+};
+
+static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8998_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
+ .tx_tbl = msm8998_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8998_usb3_tx_tbl),
+ .rx_tbl = msm8998_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
+ .pcs_tbl = msm8998_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8150_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
+ .tx_tbl = sm8150_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
+ .rx_tbl = sm8150_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
+ .pcs_tbl = sm8150_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8150_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_tx_tbl),
+ .rx_tbl = sm8150_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
+ .pcs_tbl = sm8150_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sc8180x_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_serdes_tbl),
+ .tx_tbl = sc8180x_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl),
+ .rx_tbl = sc8180x_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_rx_tbl),
+ .pcs_tbl = sc8180x_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sc8180x_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .tx_tbl = qmp_v4_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
+ .usb_cfg = &sm8150_usb3phy_cfg,
+ .dp_cfg = &sc8180x_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8150_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8150_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8250_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_tx_tbl),
+ .rx_tbl = sm8250_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
+ .pcs_tbl = sm8250_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8250_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8250_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .tx_tbl = qmp_v4_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
+ .usb_cfg = &sm8250_usb3phy_cfg,
+ .dp_cfg = &sm8250_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sdx55_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_tx_tbl),
+ .rx_tbl = sdx55_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_sdx55_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sdx55_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_serdes_tbl),
+ .tx_tbl = sdx55_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_tx_tbl),
+ .rx_tbl = sdx55_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_rx_tbl),
+ .pcs_tbl = sdx55_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sdx55_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS_4_20,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sdx65_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_tx_tbl),
+ .rx_tbl = sdx65_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_sdx55_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8350_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8350_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+ .tx_tbl = sm8350_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+ .rx_tbl = sm8350_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+ .pcs_tbl = sm8350_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8350_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_tx_tbl),
+ .rx_tbl = sm8350_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl),
+ .pcs_tbl = sm8350_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl),
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8350_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8350_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8350_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8350_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+ .tx_tbl = sm8350_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+ .rx_tbl = sm8350_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+ .pcs_tbl = sm8350_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .clk_list = sm8450_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8450_qmp_gen3x1_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl),
+ .tx_tbl = sm8450_qmp_gen3x1_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl),
+ .rx_tbl = sm8450_qmp_gen3x1_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl),
+ .pcs_tbl = sm8450_qmp_gen3x1_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8450_qmp_gen4x2_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_serdes_tbl),
+ .tx_tbl = sm8450_qmp_gen4x2_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_tx_tbl),
+ .rx_tbl = sm8450_qmp_gen4x2_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_rx_tbl),
+ .pcs_tbl = sm8450_qmp_gen4x2_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8450_qmp_gen4x2_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS_4_20,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qcm2290_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
+ .tx_tbl = qcm2290_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qcm2290_usb3_tx_tbl),
+ .rx_tbl = qcm2290_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qcm2290_usb3_rx_tbl),
+ .pcs_tbl = qcm2290_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
+ .clk_list = qcm2290_usb3phy_clk_l,
+ .num_clks = ARRAY_SIZE(qcm2290_usb3phy_clk_l),
+ .reset_list = qcm2290_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qcm2290_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static void qcom_qmp_phy_configure_lane(void __iomem *base,
+ const unsigned int *regs,
+ const struct qmp_phy_init_tbl tbl[],
+ int num,
+ u8 lane_mask)
+{
+ int i;
+ const struct qmp_phy_init_tbl *t = tbl;
+
+ if (!t)
+ return;
+
+ for (i = 0; i < num; i++, t++) {
+ if (!(t->lane_mask & lane_mask))
+ continue;
+
+ if (t->in_layout)
+ writel(t->val, base + regs[t->offset]);
+ else
+ writel(t->val, base + t->offset);
+ }
+}
+
+static void qcom_qmp_phy_configure(void __iomem *base,
+ const unsigned int *regs,
+ const struct qmp_phy_init_tbl tbl[],
+ int num)
+{
+ qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff);
+}
+
+static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
+ int serdes_tbl_num = cfg->serdes_tbl_num;
+ int ret;
+
+ qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
+ if (cfg->serdes_tbl_sec)
+ qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
+ cfg->serdes_tbl_num_sec);
+
+ if (cfg->type == PHY_TYPE_DP) {
+ switch (dp_opts->link_rate) {
+ case 1620:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_rbr,
+ cfg->serdes_tbl_rbr_num);
+ break;
+ case 2700:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr,
+ cfg->serdes_tbl_hbr_num);
+ break;
+ case 5400:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr2,
+ cfg->serdes_tbl_hbr2_num);
+ break;
+ case 8100:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr3,
+ cfg->serdes_tbl_hbr3_num);
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ }
+
+
+ if (cfg->has_phy_com_ctrl) {
+ void __iomem *status;
+ unsigned int mask, val;
+
+ qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+ SERDES_START | PCS_START);
+
+ status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
+ mask = cfg->mask_com_pcs_ready;
+
+ ret = readl_poll_timeout(status, val, (val & mask), 10,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev,
+ "phy common block init timed-out\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
+{
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ /* Turn on BIAS current for PHY/PLL */
+ writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
+ QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
+ qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN |
+ DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
+ DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(QSERDES_V3_COM_BIAS_EN |
+ QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
+ QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
+ QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
+ qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0x24, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xbb, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qphy->dp_aux_cfg = 0;
+
+ writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+ PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+ PHY_AUX_REQ_ERR_MASK,
+ qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
+}
+
+static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
+ { 0x00, 0x0c, 0x15, 0x1a },
+ { 0x02, 0x0e, 0x16, 0xff },
+ { 0x02, 0x11, 0xff, 0xff },
+ { 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
+ { 0x02, 0x12, 0x16, 0x1a },
+ { 0x09, 0x19, 0x1f, 0xff },
+ { 0x10, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
+ { 0x00, 0x0c, 0x14, 0x19 },
+ { 0x00, 0x0b, 0x12, 0xff },
+ { 0x00, 0x0b, 0xff, 0xff },
+ { 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
+ { 0x08, 0x0f, 0x16, 0x1f },
+ { 0x11, 0x1e, 0x1f, 0xff },
+ { 0x19, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
+ unsigned int drv_lvl_reg, unsigned int emp_post_reg)
+{
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ unsigned int v_level = 0, p_level = 0;
+ u8 voltage_swing_cfg, pre_emphasis_cfg;
+ int i;
+
+ for (i = 0; i < dp_opts->lanes; i++) {
+ v_level = max(v_level, dp_opts->voltage[i]);
+ p_level = max(p_level, dp_opts->pre[i]);
+ }
+
+ if (dp_opts->link_rate <= 2700) {
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
+ } else {
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
+ }
+
+ /* TODO: Move check to config check */
+ if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
+ return -EINVAL;
+
+ /* Enable MUX to use Cursor values from these registers */
+ voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
+ pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
+
+ writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
+ writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
+
+ return 0;
+}
+
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
+{
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 bias_en, drvr_en;
+
+ if (qcom_qmp_phy_configure_dp_swing(qphy,
+ QSERDES_V3_TX_TX_DRV_LVL,
+ QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
+ return;
+
+ if (dp_opts->lanes == 1) {
+ bias_en = 0x3e;
+ drvr_en = 0x13;
+ } else {
+ bias_en = 0x3f;
+ drvr_en = 0x10;
+ }
+
+ writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+}
+
+static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy)
+{
+ u32 val;
+ bool reverse = false;
+
+ val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
+
+ /*
+ * TODO: Assume orientation is CC1 for now and two lanes, need to
+ * use type-c connector to understand orientation and lanes.
+ *
+ * Otherwise val changes to be like below if this code understood
+ * the orientation of the type-c cable.
+ *
+ * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
+ * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
+ * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
+ * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
+ * if (orientation == ORIENTATION_CC2)
+ * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
+ */
+ val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
+ writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
+
+ return reverse;
+}
+
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 phy_vco_div, status;
+ unsigned long pixel_freq;
+
+ qcom_qmp_phy_configure_dp_mode(qphy);
+
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ phy_vco_div = 0x1;
+ pixel_freq = 1620000000UL / 2;
+ break;
+ case 2700:
+ phy_vco_div = 0x1;
+ pixel_freq = 2700000000UL / 2;
+ break;
+ case 5400:
+ phy_vco_div = 0x2;
+ pixel_freq = 5400000000UL / 4;
+ break;
+ case 8100:
+ phy_vco_div = 0x0;
+ pixel_freq = 8100000000UL / 6;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
+
+ clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
+ clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
+
+ writel(0x04, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ udelay(2000);
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000);
+}
+
+/*
+ * We need to calibrate the aux setting here as many times
+ * as the caller tries
+ */
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
+{
+ static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
+ u8 val;
+
+ qphy->dp_aux_cfg++;
+ qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qphy->dp_aux_cfg];
+
+ writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+
+ return 0;
+}
+
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
+{
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ /* Turn on BIAS current for PHY/PLL */
+ writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qphy->dp_aux_cfg = 0;
+
+ writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+ PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+ PHY_AUX_REQ_ERR_MASK,
+ qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
+}
+
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
+{
+ /* Program default values before writing proper values */
+ writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+
+ writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+
+ qcom_qmp_phy_configure_dp_swing(qphy,
+ QSERDES_V4_TX_TX_DRV_LVL,
+ QSERDES_V4_TX_TX_EMP_POST1_LVL);
+}
+
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 phy_vco_div, status;
+ unsigned long pixel_freq;
+ u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
+ bool reverse;
+
+ writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
+
+ reverse = qcom_qmp_phy_configure_dp_mode(qphy);
+
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+
+ writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ phy_vco_div = 0x1;
+ pixel_freq = 1620000000UL / 2;
+ break;
+ case 2700:
+ phy_vco_div = 0x1;
+ pixel_freq = 2700000000UL / 2;
+ break;
+ case 5400:
+ phy_vco_div = 0x2;
+ pixel_freq = 5400000000UL / 4;
+ break;
+ case 8100:
+ phy_vco_div = 0x0;
+ pixel_freq = 8100000000UL / 6;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
+
+ clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
+ clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
+
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ /*
+ * At least for 7nm DP PHY this has to be done after enabling link
+ * clock.
+ */
+
+ if (dp_opts->lanes == 1) {
+ bias0_en = reverse ? 0x3e : 0x15;
+ bias1_en = reverse ? 0x15 : 0x3e;
+ drvr0_en = reverse ? 0x13 : 0x10;
+ drvr1_en = reverse ? 0x10 : 0x13;
+ } else if (dp_opts->lanes == 2) {
+ bias0_en = reverse ? 0x3f : 0x15;
+ bias1_en = reverse ? 0x15 : 0x3f;
+ drvr0_en = 0x10;
+ drvr1_en = 0x10;
+ } else {
+ bias0_en = 0x3f;
+ bias1_en = 0x3f;
+ drvr0_en = 0x10;
+ drvr1_en = 0x10;
+ }
+
+ writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+
+ writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ udelay(2000);
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
+
+ writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+
+ writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+
+ return 0;
+}
+
+/*
+ * We need to calibrate the aux setting here as many times
+ * as the caller tries
+ */
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
+{
+ static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
+ u8 val;
+
+ qphy->dp_aux_cfg++;
+ qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qphy->dp_aux_cfg];
+
+ writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+
+ return 0;
+}
+
+static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ const struct phy_configure_opts_dp *dp_opts = &opts->dp;
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
+ if (qphy->dp_opts.set_voltages) {
+ cfg->configure_dp_tx(qphy);
+ qphy->dp_opts.set_voltages = 0;
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ if (cfg->calibrate_dp_phy)
+ return cfg->calibrate_dp_phy(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *dp_com = qmp->dp_com;
+ int ret, i;
+
+ mutex_lock(&qmp->phy_mutex);
+ if (qmp->init_count++) {
+ mutex_unlock(&qmp->phy_mutex);
+ return 0;
+ }
+
+ /* turn on regulator supplies */
+ ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
+ if (ret) {
+ dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
+ goto err_unlock;
+ }
+
+ for (i = 0; i < cfg->num_resets; i++) {
+ ret = reset_control_assert(qmp->resets[i]);
+ if (ret) {
+ dev_err(qmp->dev, "%s reset assert failed\n",
+ cfg->reset_list[i]);
+ goto err_disable_regulators;
+ }
+ }
+
+ for (i = cfg->num_resets - 1; i >= 0; i--) {
+ ret = reset_control_deassert(qmp->resets[i]);
+ if (ret) {
+ dev_err(qmp->dev, "%s reset deassert failed\n",
+ qphy->cfg->reset_list[i]);
+ goto err_assert_reset;
+ }
+ }
+
+ ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ if (ret)
+ goto err_assert_reset;
+
+ if (cfg->has_phy_dp_com_ctrl) {
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
+ SW_PWRDN);
+ /* override hardware control for reset of qmp phy */
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+ SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+ SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+ /* Default type-c orientation, i.e CC1 */
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
+
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
+ USB3_MODE | DP_MODE);
+
+ /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+ SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+ SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
+ }
+
+ if (cfg->has_phy_com_ctrl) {
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
+ SW_PWRDN);
+ } else {
+ if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
+ qphy_setbits(pcs,
+ cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);
+ else
+ qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL,
+ cfg->pwrdn_ctrl);
+ }
+
+ mutex_unlock(&qmp->phy_mutex);
+
+ return 0;
+
+err_assert_reset:
+ while (++i < cfg->num_resets)
+ reset_control_assert(qmp->resets[i]);
+err_disable_regulators:
+ regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+err_unlock:
+ mutex_unlock(&qmp->phy_mutex);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ int i = cfg->num_resets;
+
+ mutex_lock(&qmp->phy_mutex);
+ if (--qmp->init_count) {
+ mutex_unlock(&qmp->phy_mutex);
+ return 0;
+ }
+
+ reset_control_assert(qmp->ufs_reset);
+ if (cfg->has_phy_com_ctrl) {
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+ SERDES_START | PCS_START);
+ qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET],
+ SW_RESET);
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
+ SW_PWRDN);
+ }
+
+ while (--i >= 0)
+ reset_control_assert(qmp->resets[i]);
+
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+ regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+
+ mutex_unlock(&qmp->phy_mutex);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_init(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ int ret;
+ dev_vdbg(qmp->dev, "Initializing QMP phy\n");
+
+ if (cfg->no_pcs_sw_reset) {
+ /*
+ * Get UFS reset, which is delayed until now to avoid a
+ * circular dependency where UFS needs its PHY, but the PHY
+ * needs this UFS reset.
+ */
+ if (!qmp->ufs_reset) {
+ qmp->ufs_reset =
+ devm_reset_control_get_exclusive(qmp->dev,
+ "ufsphy");
+
+ if (IS_ERR(qmp->ufs_reset)) {
+ ret = PTR_ERR(qmp->ufs_reset);
+ dev_err(qmp->dev,
+ "failed to get UFS reset: %d\n",
+ ret);
+
+ qmp->ufs_reset = NULL;
+ return ret;
+ }
+ }
+
+ ret = reset_control_assert(qmp->ufs_reset);
+ if (ret)
+ return ret;
+ }
+
+ ret = qcom_qmp_phy_com_init(qphy);
+ if (ret)
+ return ret;
+
+ if (cfg->type == PHY_TYPE_DP)
+ cfg->dp_aux_init(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_power_on(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *tx = qphy->tx;
+ void __iomem *rx = qphy->rx;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+ void __iomem *status;
+ unsigned int mask, val, ready;
+ int ret;
+
+ qcom_qmp_phy_serdes_init(qphy);
+
+ if (cfg->has_lane_rst) {
+ ret = reset_control_deassert(qphy->lane_rst);
+ if (ret) {
+ dev_err(qmp->dev, "lane%d reset deassert failed\n",
+ qphy->index);
+ return ret;
+ }
+ }
+
+ ret = clk_prepare_enable(qphy->pipe_clk);
+ if (ret) {
+ dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
+ goto err_reset_lane;
+ }
+
+ /* Tx, Rx, and PCS configurations */
+ qcom_qmp_phy_configure_lane(tx, cfg->regs,
+ cfg->tx_tbl, cfg->tx_tbl_num, 1);
+ if (cfg->tx_tbl_sec)
+ qcom_qmp_phy_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
+ cfg->tx_tbl_num_sec, 1);
+
+ /* Configuration for other LANE for USB-DP combo PHY */
+ if (cfg->is_dual_lane_phy) {
+ qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
+ cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ if (cfg->tx_tbl_sec)
+ qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
+ cfg->tx_tbl_sec,
+ cfg->tx_tbl_num_sec, 2);
+ }
+
+ /* Configure special DP tx tunings */
+ if (cfg->type == PHY_TYPE_DP)
+ cfg->configure_dp_tx(qphy);
+
+ qcom_qmp_phy_configure_lane(rx, cfg->regs,
+ cfg->rx_tbl, cfg->rx_tbl_num, 1);
+ if (cfg->rx_tbl_sec)
+ qcom_qmp_phy_configure_lane(rx, cfg->regs,
+ cfg->rx_tbl_sec, cfg->rx_tbl_num_sec, 1);
+
+ if (cfg->is_dual_lane_phy) {
+ qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
+ cfg->rx_tbl, cfg->rx_tbl_num, 2);
+ if (cfg->rx_tbl_sec)
+ qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
+ cfg->rx_tbl_sec,
+ cfg->rx_tbl_num_sec, 2);
+ }
+
+ /* Configure link rate, swing, etc. */
+ if (cfg->type == PHY_TYPE_DP) {
+ cfg->configure_dp_phy(qphy);
+ } else {
+ qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+ if (cfg->pcs_tbl_sec)
+ qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
+ cfg->pcs_tbl_num_sec);
+ }
+
+ ret = reset_control_deassert(qmp->ufs_reset);
+ if (ret)
+ goto err_disable_pipe_clk;
+
+ qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
+ cfg->pcs_misc_tbl_num);
+ if (cfg->pcs_misc_tbl_sec)
+ qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
+ cfg->pcs_misc_tbl_num_sec);
+
+ /*
+ * Pull out PHY from POWER DOWN state.
+ * This is active low enable signal to power-down PHY.
+ */
+ if(cfg->type == PHY_TYPE_PCIE)
+ qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
+
+ if (cfg->has_pwrdn_delay)
+ usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
+
+ if (cfg->type != PHY_TYPE_DP) {
+ /* Pull PHY out of reset state */
+ if (!cfg->no_pcs_sw_reset)
+ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+ /* start SerDes and Phy-Coding-Sublayer */
+ qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+ if (cfg->type == PHY_TYPE_UFS) {
+ status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
+ mask = PCS_READY;
+ ready = PCS_READY;
+ } else {
+ status = pcs + cfg->regs[QPHY_PCS_STATUS];
+ mask = cfg->phy_status;
+ ready = 0;
+ }
+
+ ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev, "phy initialization timed-out\n");
+ goto err_disable_pipe_clk;
+ }
+ }
+ return 0;
+
+err_disable_pipe_clk:
+ clk_disable_unprepare(qphy->pipe_clk);
+err_reset_lane:
+ if (cfg->has_lane_rst)
+ reset_control_assert(qphy->lane_rst);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_power_off(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ clk_disable_unprepare(qphy->pipe_clk);
+
+ if (cfg->type == PHY_TYPE_DP) {
+ /* Assert DP PHY power down */
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ } else {
+ /* PHY reset */
+ if (!cfg->no_pcs_sw_reset)
+ qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+
+ /* stop SerDes and Phy-Coding-Sublayer */
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+ /* Put PHY into POWER DOWN state: active low */
+ if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);
+ } else {
+ qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL,
+ cfg->pwrdn_ctrl);
+ }
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_phy_exit(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ if (cfg->has_lane_rst)
+ reset_control_assert(qphy->lane_rst);
+
+ qcom_qmp_phy_com_exit(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_enable(struct phy *phy)
+{
+ int ret;
+
+ ret = qcom_qmp_phy_init(phy);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_power_on(phy);
+ if (ret)
+ qcom_qmp_phy_exit(phy);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_disable(struct phy *phy)
+{
+ int ret;
+
+ ret = qcom_qmp_phy_power_off(phy);
+ if (ret)
+ return ret;
+ return qcom_qmp_phy_exit(phy);
+}
+
+static int qcom_qmp_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+
+ qphy->mode = mode;
+
+ return 0;
+}
+
+static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+ u32 intr_mask;
+
+ if (qphy->mode == PHY_MODE_USB_HOST_SS ||
+ qphy->mode == PHY_MODE_USB_DEVICE_SS)
+ intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
+ else
+ intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
+
+ /* Clear any pending interrupts status */
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ /* Writing 1 followed by 0 clears the interrupt */
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
+
+ /* Enable required PHY autonomous mode interrupts */
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
+
+ /* Enable i/o clamp_n for autonomous mode */
+ if (pcs_misc)
+ qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
+}
+
+static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+
+ /* Disable i/o clamp_n on resume for normal mode */
+ if (pcs_misc)
+ qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
+
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
+
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ /* Writing 1 followed by 0 clears the interrupt */
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+}
+
+static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_phy *qphy = qmp->phys[0];
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
+
+ /* Supported only for USB3 PHY and luckily USB3 is the first phy */
+ if (cfg->type != PHY_TYPE_USB3)
+ return 0;
+
+ if (!qmp->init_count) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ qcom_qmp_phy_enable_autonomous_mode(qphy);
+
+ clk_disable_unprepare(qphy->pipe_clk);
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+ return 0;
+}
+
+static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_phy *qphy = qmp->phys[0];
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ int ret = 0;
+
+ dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
+
+ /* Supported only for USB3 PHY and luckily USB3 is the first phy */
+ if (cfg->type != PHY_TYPE_USB3)
+ return 0;
+
+ if (!qmp->init_count) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(qphy->pipe_clk);
+ if (ret) {
+ dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+ return ret;
+ }
+
+ qcom_qmp_phy_disable_autonomous_mode(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int num = cfg->num_vregs;
+ int i;
+
+ qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
+ if (!qmp->vregs)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++)
+ qmp->vregs[i].supply = cfg->vreg_list[i];
+
+ return devm_regulator_bulk_get(dev, num, qmp->vregs);
+}
+
+static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int i;
+
+ qmp->resets = devm_kcalloc(dev, cfg->num_resets,
+ sizeof(*qmp->resets), GFP_KERNEL);
+ if (!qmp->resets)
+ return -ENOMEM;
+
+ for (i = 0; i < cfg->num_resets; i++) {
+ struct reset_control *rst;
+ const char *name = cfg->reset_list[i];
+
+ rst = devm_reset_control_get_exclusive(dev, name);
+ if (IS_ERR(rst)) {
+ dev_err(dev, "failed to get %s reset\n", name);
+ return PTR_ERR(rst);
+ }
+ qmp->resets[i] = rst;
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int num = cfg->num_clks;
+ int i;
+
+ qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
+ if (!qmp->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++)
+ qmp->clks[i].id = cfg->clk_list[i];
+
+ return devm_clk_bulk_get(dev, num, qmp->clks);
+}
+
+static void phy_clk_release_provider(void *res)
+{
+ of_clk_del_provider(res);
+}
+
+/*
+ * Register a fixed rate pipe clock.
+ *
+ * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
+ * controls it. The <s>_pipe_clk coming out of the GCC is requested
+ * by the PHY driver for its operations.
+ * We register the <s>_pipe_clksrc here. The gcc driver takes care
+ * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
+ * Below picture shows this relationship.
+ *
+ * +---------------+
+ * | PHY block |<<---------------------------------------+
+ * | | |
+ * | +-------+ | +-----+ |
+ * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
+ * clk | +-------+ | +-----+
+ * +---------------+
+ */
+static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
+{
+ struct clk_fixed_rate *fixed;
+ struct clk_init_data init = { };
+ int ret;
+
+ ret = of_property_read_string(np, "clock-output-names", &init.name);
+ if (ret) {
+ dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
+ return ret;
+ }
+
+ fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
+ if (!fixed)
+ return -ENOMEM;
+
+ init.ops = &clk_fixed_rate_ops;
+
+ /* controllers using QMP phys use 125MHz pipe clock interface */
+ fixed->fixed_rate = 125000000;
+ fixed->hw.init = &init;
+
+ ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
+ if (ret)
+ return ret;
+
+ /*
+ * Roll a devm action because the clock provider is the child node, but
+ * the child node is not actually a device.
+ */
+ return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
+}
+
+/*
+ * Display Port PLL driver block diagram for branch clocks
+ *
+ * +------------------------------+
+ * | DP_VCO_CLK |
+ * | |
+ * | +-------------------+ |
+ * | | (DP PLL/VCO) | |
+ * | +---------+---------+ |
+ * | v |
+ * | +----------+-----------+ |
+ * | | hsclk_divsel_clk_src | |
+ * | +----------+-----------+ |
+ * +------------------------------+
+ * |
+ * +---------<---------v------------>----------+
+ * | |
+ * +--------v----------------+ |
+ * | dp_phy_pll_link_clk | |
+ * | link_clk | |
+ * +--------+----------------+ |
+ * | |
+ * | |
+ * v v
+ * Input to DISPCC block |
+ * for link clk, crypto clk |
+ * and interface clock |
+ * |
+ * |
+ * +--------<------------+-----------------+---<---+
+ * | | |
+ * +----v---------+ +--------v-----+ +--------v------+
+ * | vco_divided | | vco_divided | | vco_divided |
+ * | _clk_src | | _clk_src | | _clk_src |
+ * | | | | | |
+ * |divsel_six | | divsel_two | | divsel_four |
+ * +-------+------+ +-----+--------+ +--------+------+
+ * | | |
+ * v---->----------v-------------<------v
+ * |
+ * +----------+-----------------+
+ * | dp_phy_pll_vco_div_clk |
+ * +---------+------------------+
+ * |
+ * v
+ * Input to DISPCC block
+ * for DP pixel clock
+ *
+ */
+static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 1620000000UL / 2:
+ case 2700000000UL / 2:
+ /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qmp_phy_dp_clks *dp_clks;
+ const struct qmp_phy *qphy;
+ const struct phy_configure_opts_dp *dp_opts;
+
+ dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
+ qphy = dp_clks->qphy;
+ dp_opts = &qphy->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ return 1620000000UL / 2;
+ case 2700:
+ return 2700000000UL / 2;
+ case 5400:
+ return 5400000000UL / 4;
+ case 8100:
+ return 8100000000UL / 6;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = {
+ .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate,
+ .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate,
+};
+
+static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 162000000:
+ case 270000000:
+ case 540000000:
+ case 810000000:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qmp_phy_dp_clks *dp_clks;
+ const struct qmp_phy *qphy;
+ const struct phy_configure_opts_dp *dp_opts;
+
+ dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
+ qphy = dp_clks->qphy;
+ dp_opts = &qphy->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ case 2700:
+ case 5400:
+ case 8100:
+ return dp_opts->link_rate * 100000;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_qmp_dp_link_clk_ops = {
+ .determine_rate = qcom_qmp_dp_link_clk_determine_rate,
+ .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate,
+};
+
+static struct clk_hw *
+qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct qmp_phy_dp_clks *dp_clks = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx >= 2) {
+ pr_err("%s: invalid index %u\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (idx == 0)
+ return &dp_clks->dp_link_hw;
+
+ return &dp_clks->dp_pixel_hw;
+}
+
+static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
+ struct device_node *np)
+{
+ struct clk_init_data init = { };
+ struct qmp_phy_dp_clks *dp_clks;
+ char name[64];
+ int ret;
+
+ dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
+ if (!dp_clks)
+ return -ENOMEM;
+
+ dp_clks->qphy = qphy;
+ qphy->dp_clks = dp_clks;
+
+ snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
+ init.ops = &qcom_qmp_dp_link_clk_ops;
+ init.name = name;
+ dp_clks->dp_link_hw.init = &init;
+ ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
+ if (ret)
+ return ret;
+
+ snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev));
+ init.ops = &qcom_qmp_dp_pixel_clk_ops;
+ init.name = name;
+ dp_clks->dp_pixel_hw.init = &init;
+ ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks);
+ if (ret)
+ return ret;
+
+ /*
+ * Roll a devm action because the clock provider is the child node, but
+ * the child node is not actually a device.
+ */
+ return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
+}
+
+static const struct phy_ops qcom_qmp_phy_gen_ops = {
+ .init = qcom_qmp_phy_enable,
+ .exit = qcom_qmp_phy_disable,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops qcom_qmp_phy_dp_ops = {
+ .init = qcom_qmp_phy_init,
+ .configure = qcom_qmp_dp_phy_configure,
+ .power_on = qcom_qmp_phy_power_on,
+ .calibrate = qcom_qmp_dp_phy_calibrate,
+ .power_off = qcom_qmp_phy_power_off,
+ .exit = qcom_qmp_phy_exit,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
+ .power_on = qcom_qmp_phy_enable,
+ .power_off = qcom_qmp_phy_disable,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static void qcom_qmp_reset_control_put(void *data)
+{
+ reset_control_put(data);
+}
+
+static
+int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
+ void __iomem *serdes, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct phy *generic_phy;
+ struct qmp_phy *qphy;
+ const struct phy_ops *ops;
+ char prop_name[MAX_PROP_NAME];
+ int ret;
+
+ qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
+ if (!qphy)
+ return -ENOMEM;
+
+ qphy->cfg = cfg;
+ qphy->serdes = serdes;
+ /*
+ * Get memory resources for each phy lane:
+ * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
+ * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
+ * For single lane PHYs: pcs_misc (optional) -> 3.
+ */
+ qphy->tx = of_iomap(np, 0);
+ if (!qphy->tx)
+ return -ENOMEM;
+
+ qphy->rx = of_iomap(np, 1);
+ if (!qphy->rx)
+ return -ENOMEM;
+
+ qphy->pcs = of_iomap(np, 2);
+ if (!qphy->pcs)
+ return -ENOMEM;
+
+ /*
+ * If this is a dual-lane PHY, then there should be registers for the
+ * second lane. Some old device trees did not specify this, so fall
+ * back to old legacy behavior of assuming they can be reached at an
+ * offset from the first lane.
+ */
+ if (cfg->is_dual_lane_phy) {
+ qphy->tx2 = of_iomap(np, 3);
+ qphy->rx2 = of_iomap(np, 4);
+ if (!qphy->tx2 || !qphy->rx2) {
+ dev_warn(dev,
+ "Underspecified device tree, falling back to legacy register regions\n");
+
+ /* In the old version, pcs_misc is at index 3. */
+ qphy->pcs_misc = qphy->tx2;
+ qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
+ qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
+
+ } else {
+ qphy->pcs_misc = of_iomap(np, 5);
+ }
+
+ } else {
+ qphy->pcs_misc = of_iomap(np, 3);
+ }
+
+ if (!qphy->pcs_misc)
+ dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
+
+ /*
+ * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
+ * based phys, so they essentially have pipe clock. So,
+ * we return error in case phy is USB3 or PIPE type.
+ * Otherwise, we initialize pipe clock to NULL for
+ * all phys that don't need this.
+ */
+ snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
+ qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
+ if (IS_ERR(qphy->pipe_clk)) {
+ if (cfg->type == PHY_TYPE_PCIE ||
+ cfg->type == PHY_TYPE_USB3) {
+ ret = PTR_ERR(qphy->pipe_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev,
+ "failed to get lane%d pipe_clk, %d\n",
+ id, ret);
+ return ret;
+ }
+ qphy->pipe_clk = NULL;
+ }
+
+ /* Get lane reset, if any */
+ if (cfg->has_lane_rst) {
+ snprintf(prop_name, sizeof(prop_name), "lane%d", id);
+ qphy->lane_rst = of_reset_control_get_exclusive(np, prop_name);
+ if (IS_ERR(qphy->lane_rst)) {
+ dev_err(dev, "failed to get lane%d reset\n", id);
+ return PTR_ERR(qphy->lane_rst);
+ }
+ ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put,
+ qphy->lane_rst);
+ if (ret)
+ return ret;
+ }
+
+ if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE)
+ ops = &qcom_qmp_pcie_ufs_ops;
+ else if (cfg->type == PHY_TYPE_DP)
+ ops = &qcom_qmp_phy_dp_ops;
+ else
+ ops = &qcom_qmp_phy_gen_ops;
+
+ generic_phy = devm_phy_create(dev, np, ops);
+ if (IS_ERR(generic_phy)) {
+ ret = PTR_ERR(generic_phy);
+ dev_err(dev, "failed to create qphy %d\n", ret);
+ return ret;
+ }
+
+ qphy->phy = generic_phy;
+ qphy->index = id;
+ qphy->qmp = qmp;
+ qmp->phys[id] = qphy;
+ phy_set_drvdata(generic_phy, qphy);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,ipq8074-qmp-usb3-phy",
+ .data = &ipq8074_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-pcie-phy",
+ .data = &msm8996_pciephy_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-ufs-phy",
+ .data = &msm8996_ufs_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-usb3-phy",
+ .data = &msm8996_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-pcie-phy",
+ .data = &msm8998_pciephy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,ipq8074-qmp-pcie-phy",
+ .data = &ipq8074_pciephy_cfg,
+ }, {
+ .compatible = "qcom,ipq6018-qmp-pcie-phy",
+ .data = &ipq6018_pciephy_cfg,
+ }, {
+ .compatible = "qcom,ipq6018-qmp-usb3-phy",
+ .data = &ipq8074_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc7180-qmp-usb3-phy",
+ .data = &sc7180_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sc8180x-qmp-pcie-phy",
+ .data = &sc8180x_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sc8280xp-qmp-ufs-phy",
+ .data = &sm8350_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-usb3-phy",
+ .data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sdm845-qhp-pcie-phy",
+ .data = &sdm845_qhp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-pcie-phy",
+ .data = &sdm845_qmp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-usb3-phy",
+ .data = &qmp_v3_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-usb3-uni-phy",
+ .data = &qmp_v3_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-usb3-phy",
+ .data = &msm8998_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm6115-qmp-ufs-phy",
+ .data = &sm6115_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm6350-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-phy",
+ .data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-uni-phy",
+ .data = &sm8150_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-phy",
+ .data = &sm8250_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-uni-phy",
+ .data = &sm8250_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy",
+ .data = &sm8250_qmp_gen3x1_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy",
+ .data = &sm8250_qmp_gen3x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-ufs-phy",
+ .data = &sm8350_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-modem-pcie-phy",
+ .data = &sm8250_qmp_gen3x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdx55-qmp-pcie-phy",
+ .data = &sdx55_qmp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdx55-qmp-usb3-uni-phy",
+ .data = &sdx55_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sdx65-qmp-usb3-uni-phy",
+ .data = &sdx65_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-usb3-phy",
+ .data = &sm8350_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-usb3-uni-phy",
+ .data = &sm8350_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
+ .data = &sm8450_qmp_gen3x1_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
+ .data = &sm8450_qmp_gen4x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-ufs-phy",
+ .data = &sm8450_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-usb3-phy",
+ .data = &sm8350_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,qcm2290-qmp-usb3-phy",
+ .data = &qcm2290_usb3phy_cfg,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
+
+static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ .data = &sc7180_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ .data = &sm8250_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ .data = &sc8180x_usb3dpphy_cfg,
+ },
+ { }
+};
+
+static const struct dev_pm_ops qcom_qmp_phy_pm_ops = {
+ SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend,
+ qcom_qmp_phy_runtime_resume, NULL)
+};
+
+static int qcom_qmp_phy_probe(struct platform_device *pdev)
+{
+ struct qcom_qmp *qmp;
+ struct device *dev = &pdev->dev;
+ struct device_node *child;
+ struct phy_provider *phy_provider;
+ void __iomem *serdes;
+ void __iomem *usb_serdes;
+ void __iomem *dp_serdes = NULL;
+ const struct qmp_phy_combo_cfg *combo_cfg = NULL;
+ const struct qmp_phy_cfg *cfg = NULL;
+ const struct qmp_phy_cfg *usb_cfg = NULL;
+ const struct qmp_phy_cfg *dp_cfg = NULL;
+ int num, id, expected_phys;
+ int ret;
+
+ qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
+ if (!qmp)
+ return -ENOMEM;
+
+ qmp->dev = dev;
+ dev_set_drvdata(dev, qmp);
+
+ /* Get the specific init parameters of QMP phy */
+ cfg = of_device_get_match_data(dev);
+ if (!cfg) {
+ const struct of_device_id *match;
+
+ match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev);
+ if (!match)
+ return -EINVAL;
+
+ combo_cfg = match->data;
+ if (!combo_cfg)
+ return -EINVAL;
+
+ usb_cfg = combo_cfg->usb_cfg;
+ cfg = usb_cfg; /* Setup clks and regulators */
+ }
+
+ /* per PHY serdes; usually located at base address */
+ usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(serdes))
+ return PTR_ERR(serdes);
+
+ /* per PHY dp_com; if PHY has dp_com control block */
+ if (combo_cfg || cfg->has_phy_dp_com_ctrl) {
+ qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(qmp->dp_com))
+ return PTR_ERR(qmp->dp_com);
+ }
+
+ if (combo_cfg) {
+ /* Only two serdes for combo PHY */
+ dp_serdes = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(dp_serdes))
+ return PTR_ERR(dp_serdes);
+
+ dp_cfg = combo_cfg->dp_cfg;
+ expected_phys = 2;
+ } else {
+ expected_phys = cfg->nlanes;
+ }
+
+ mutex_init(&qmp->phy_mutex);
+
+ ret = qcom_qmp_phy_clk_init(dev, cfg);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_reset_init(dev, cfg);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_vreg_init(dev, cfg);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get regulator supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ num = of_get_available_child_count(dev->of_node);
+ /* do we have a rogue child node ? */
+ if (num > expected_phys)
+ return -EINVAL;
+
+ qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
+ if (!qmp->phys)
+ return -ENOMEM;
+
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ /*
+ * Prevent runtime pm from being ON by default. Users can enable
+ * it using power/control in sysfs.
+ */
+ pm_runtime_forbid(dev);
+
+ id = 0;
+ for_each_available_child_of_node(dev->of_node, child) {
+ if (of_node_name_eq(child, "dp-phy")) {
+ cfg = dp_cfg;
+ serdes = dp_serdes;
+ } else if (of_node_name_eq(child, "usb3-phy")) {
+ cfg = usb_cfg;
+ serdes = usb_serdes;
+ }
+
+ /* Create per-lane phy */
+ ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg);
+ if (ret) {
+ dev_err(dev, "failed to create lane%d phy, %d\n",
+ id, ret);
+ goto err_node_put;
+ }
+
+ /*
+ * Register the pipe clock provided by phy.
+ * See function description to see details of this pipe clock.
+ */
+ if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) {
+ ret = phy_pipe_clk_register(qmp, child);
+ if (ret) {
+ dev_err(qmp->dev,
+ "failed to register pipe clock source\n");
+ goto err_node_put;
+ }
+ } else if (cfg->type == PHY_TYPE_DP) {
+ ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
+ if (ret) {
+ dev_err(qmp->dev,
+ "failed to register DP clock source\n");
+ goto err_node_put;
+ }
+ }
+ id++;
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (!IS_ERR(phy_provider))
+ dev_info(dev, "Registered Qcom-QMP phy\n");
+ else
+ pm_runtime_disable(dev);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+
+err_node_put:
+ pm_runtime_disable(dev);
+ of_node_put(child);
+ return ret;
+}
+
+static struct platform_driver qcom_qmp_phy_driver = {
+ .probe = qcom_qmp_phy_probe,
+ .driver = {
+ .name = "qcom-qmp-phy",
+ .pm = &qcom_qmp_phy_pm_ops,
+ .of_match_table = qcom_qmp_phy_of_match_table,
+ },
+};
+
+module_platform_driver(qcom_qmp_phy_driver);
+
+MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm QMP PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
new file mode 100644
index 000000000000..c7309e981bfb
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
@@ -0,0 +1,6350 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#include "phy-qcom-qmp.h"
+
+/* QPHY_SW_RESET bit */
+#define SW_RESET BIT(0)
+/* QPHY_POWER_DOWN_CONTROL */
+#define SW_PWRDN BIT(0)
+#define REFCLK_DRV_DSBL BIT(1)
+/* QPHY_START_CONTROL bits */
+#define SERDES_START BIT(0)
+#define PCS_START BIT(1)
+#define PLL_READY_GATE_EN BIT(3)
+/* QPHY_PCS_STATUS bit */
+#define PHYSTATUS BIT(6)
+#define PHYSTATUS_4_20 BIT(7)
+/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
+#define PCS_READY BIT(0)
+
+/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
+/* DP PHY soft reset */
+#define SW_DPPHY_RESET BIT(0)
+/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
+#define SW_DPPHY_RESET_MUX BIT(1)
+/* USB3 PHY soft reset */
+#define SW_USB3PHY_RESET BIT(2)
+/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
+#define SW_USB3PHY_RESET_MUX BIT(3)
+
+/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
+#define USB3_MODE BIT(0) /* enables USB3 mode */
+#define DP_MODE BIT(1) /* enables DP mode */
+
+/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
+#define ARCVR_DTCT_EN BIT(0)
+#define ALFPS_DTCT_EN BIT(1)
+#define ARCVR_DTCT_EVENT_SEL BIT(4)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
+#define IRQ_CLEAR BIT(0)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
+#define RCVR_DETECT BIT(0)
+
+/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
+#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
+
+#define PHY_INIT_COMPLETE_TIMEOUT 10000
+#define POWER_DOWN_DELAY_US_MIN 10
+#define POWER_DOWN_DELAY_US_MAX 11
+
+#define MAX_PROP_NAME 32
+
+/* Define the assumed distance between lanes for underspecified device trees. */
+#define QMP_PHY_LEGACY_LANE_STRIDE 0x400
+
+struct qmp_phy_init_tbl {
+ unsigned int offset;
+ unsigned int val;
+ /*
+ * register part of layout ?
+ * if yes, then offset gives index in the reg-layout
+ */
+ bool in_layout;
+ /*
+ * mask of lanes for which this register is written
+ * for cases when second lane needs different values
+ */
+ u8 lane_mask;
+};
+
+#define QMP_PHY_INIT_CFG(o, v) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .lane_mask = 0xff, \
+ }
+
+#define QMP_PHY_INIT_CFG_L(o, v) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .in_layout = true, \
+ .lane_mask = 0xff, \
+ }
+
+#define QMP_PHY_INIT_CFG_LANE(o, v, l) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .lane_mask = l, \
+ }
+
+/* set of registers with offsets different per-PHY */
+enum qphy_reg_layout {
+ /* Common block control registers */
+ QPHY_COM_SW_RESET,
+ QPHY_COM_POWER_DOWN_CONTROL,
+ QPHY_COM_START_CONTROL,
+ QPHY_COM_PCS_READY_STATUS,
+ /* PCS registers */
+ QPHY_PLL_LOCK_CHK_DLY_TIME,
+ QPHY_FLL_CNTRL1,
+ QPHY_FLL_CNTRL2,
+ QPHY_FLL_CNT_VAL_L,
+ QPHY_FLL_CNT_VAL_H_TOL,
+ QPHY_FLL_MAN_CODE,
+ QPHY_SW_RESET,
+ QPHY_START_CTRL,
+ QPHY_PCS_READY_STATUS,
+ QPHY_PCS_STATUS,
+ QPHY_PCS_AUTONOMOUS_MODE_CTRL,
+ QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
+ QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
+ QPHY_PCS_POWER_DOWN_CONTROL,
+ /* PCS_MISC registers */
+ QPHY_PCS_MISC_TYPEC_CTRL,
+ /* Keep last to ensure regs_layout arrays are properly initialized */
+ QPHY_LAYOUT_SIZE
+};
+
+static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
+static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+};
+
+static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_COM_SW_RESET] = 0x400,
+ [QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
+ [QPHY_COM_START_CONTROL] = 0x408,
+ [QPHY_COM_PCS_READY_STATUS] = 0x448,
+ [QPHY_PLL_LOCK_CHK_DLY_TIME] = 0xa8,
+ [QPHY_FLL_CNTRL1] = 0xc4,
+ [QPHY_FLL_CNTRL2] = 0xc8,
+ [QPHY_FLL_CNT_VAL_L] = 0xcc,
+ [QPHY_FLL_CNT_VAL_H_TOL] = 0xd0,
+ [QPHY_FLL_MAN_CODE] = 0xd4,
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+};
+
+static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_FLL_CNTRL1] = 0xc0,
+ [QPHY_FLL_CNTRL2] = 0xc4,
+ [QPHY_FLL_CNT_VAL_L] = 0xc8,
+ [QPHY_FLL_CNT_VAL_H_TOL] = 0xcc,
+ [QPHY_FLL_MAN_CODE] = 0xd0,
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x17c,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
+};
+
+static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
+};
+
+static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+};
+
+static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x2ac,
+};
+
+static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
+};
+
+static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
+};
+
+static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x1008,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
+};
+
+static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
+ [QPHY_PCS_STATUS] = 0x174,
+ [QPHY_PCS_MISC_TYPEC_CTRL] = 0x00,
+};
+
+static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x160,
+};
+
+static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
+static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+};
+
+static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = QPHY_V4_PCS_UFS_PHY_START,
+ [QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_UFS_READY_STATUS,
+ [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET,
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ /* PLL and Loop filter settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ /* SSC settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c),
+ QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+
+ QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05),
+
+ QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05),
+ QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04),
+ /* PLL and Loop filter settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ /* SSC settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x29),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x53),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x61),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_EQ_CONFIG5, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+ QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
+ QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_POST, 0x58),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
+ QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
+ QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
+ QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
+ QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
+ QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x007),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_01, 0x59),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xbb),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG4, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2, 0x52),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4, 0x1a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5, 0x06),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SYSCLK_EN_SEL, 0x27),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BIAS_EN_CKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_ENABLE1, 0xb0),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE0, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_RESTRIM_CTRL2, 0x05),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VCO_TUNE_MAP, 0x10),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_SELECT, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_HSCLK_SEL1, 0x30),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORE_CLK_EN, 0x73),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SVS_MODE_CLK_SEL, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV1, 0x22),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV2, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BGV_TRIM, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BG_CTRL, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL0, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_TAP_EN, 0x0d),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TX_BAND_MODE, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_LANE_MODE, 0x1a),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PARALLEL_RATE, 0x2f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE0, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE1, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE2, 0x1b),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE2, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE0, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE1, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE2, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_THRESH_DFE, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CGA_THRESH_DFE, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXENGINE_EN0, 0x12),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_TRAIN_TIME, 0x25),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_DFE_OVRLP_TIME, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_REFRESH_TIME, 0x05),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_ENABLE_TIME, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_GAIN, 0x26),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_GAIN, 0x12),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_OFFSET_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PRE_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_INTVAL, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EDAC_INITVAL, 0x28),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB0, 0x7f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB1, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RCVRDONE_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_CTRL, 0x70),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE0, 0x8b),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE2, 0x0a),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE2, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_BAND, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE0, 0x5c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE1, 0x3e),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE2, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_ENABLES, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_CNTRL, 0xa0),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_DEGLITCH_CNTRL, 0x08),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DCC_GAIN, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_EN_SIGNAL, 0xc3),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PSM_RX_EN_CAL, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_MISC_CNTRL0, 0xbc),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TS0_TIMER, 0x7f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DLL_HIGHDATARATE, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RESETCODE_OFFSET, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_INITVAL, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RSM_START, 0x01),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_rx_tbl[] = {
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_PCS_TX_RX_CONFIG, 0x50),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M3P5DB, 0x19),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M3P5DB, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M6DB, 0x17),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M6DB, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG5, 0x9f),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x50),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb5),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4c),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x64),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x0F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x1E),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0D),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5B),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_RX_PWM_GEAR_BAND, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_DRV_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),
+ QMP_PHY_INIT_CFG(QPHY_RX_SYM_RESYNC_CTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_POST_EMP_LVL, 0x12),
+ QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_POST_EMP_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL2, 0x6e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SYM_RESYNC_CTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL1, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_MIN_HIBERN8_TIME, 0x9a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
+
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x94),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x5),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x6e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x39),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x39),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x01),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x35),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x12),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P6_P7_PRE, 0x33),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_EQ_CONFIG2, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x05),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG2, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x08),
+};
+
+static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x26),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x048),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x46),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_CFG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x50),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MISC1, 0x88),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTERNAL_DIG_CORECLK_DIV, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MODE, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_DC_LEVEL_CTRL, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x56),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x22),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_3, 0x13),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_VMODE_CTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_PI_QEC_CTRL, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_FO_GAIN_RATE2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_3, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_VGA_CAL_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x27),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B0, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B1, 0xf9),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B3, 0xce),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B4, 0x62),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B0, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B3, 0xcf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B4, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_PHPRE_CTRL, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_MARG_COARSE_CTRL2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG2, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG4, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG5, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_EQ_CONFIG1, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G3_RXEQEVAL_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_RXEQEVAL_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG2, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0b),
+};
+
+static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x65),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xf5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf1),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xed),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x3c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xb7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0xb7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_INITVAL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x01),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_EQ_CONFIG2, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x46),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_CFG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0xd0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MISC1, 0x88),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_DC_LEVEL_CTRL, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xcc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xcc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x29),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0xc5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xad),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xb6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xc7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xef),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x05),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
+};
+
+/* Register names should be validated, they might be different for this PHY */
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_EQ_CONFIG1, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3, 0x28),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
+};
+
+struct qmp_phy;
+
+/* struct qmp_phy_cfg - per-PHY initialization config */
+struct qmp_phy_cfg {
+ /* phy-type - PCIE/UFS/USB */
+ unsigned int type;
+ /* number of lanes provided by phy */
+ int nlanes;
+
+ /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
+ const struct qmp_phy_init_tbl *serdes_tbl;
+ int serdes_tbl_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_sec;
+ int serdes_tbl_num_sec;
+ const struct qmp_phy_init_tbl *tx_tbl;
+ int tx_tbl_num;
+ const struct qmp_phy_init_tbl *tx_tbl_sec;
+ int tx_tbl_num_sec;
+ const struct qmp_phy_init_tbl *rx_tbl;
+ int rx_tbl_num;
+ const struct qmp_phy_init_tbl *rx_tbl_sec;
+ int rx_tbl_num_sec;
+ const struct qmp_phy_init_tbl *pcs_tbl;
+ int pcs_tbl_num;
+ const struct qmp_phy_init_tbl *pcs_tbl_sec;
+ int pcs_tbl_num_sec;
+ const struct qmp_phy_init_tbl *pcs_misc_tbl;
+ int pcs_misc_tbl_num;
+ const struct qmp_phy_init_tbl *pcs_misc_tbl_sec;
+ int pcs_misc_tbl_num_sec;
+
+ /* Init sequence for DP PHY block link rates */
+ const struct qmp_phy_init_tbl *serdes_tbl_rbr;
+ int serdes_tbl_rbr_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr;
+ int serdes_tbl_hbr_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr2;
+ int serdes_tbl_hbr2_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
+ int serdes_tbl_hbr3_num;
+
+ /* DP PHY callbacks */
+ int (*configure_dp_phy)(struct qmp_phy *qphy);
+ void (*configure_dp_tx)(struct qmp_phy *qphy);
+ int (*calibrate_dp_phy)(struct qmp_phy *qphy);
+ void (*dp_aux_init)(struct qmp_phy *qphy);
+
+ /* clock ids to be requested */
+ const char * const *clk_list;
+ int num_clks;
+ /* resets to be requested */
+ const char * const *reset_list;
+ int num_resets;
+ /* regulators to be requested */
+ const char * const *vreg_list;
+ int num_vregs;
+
+ /* array of registers with different offsets */
+ const unsigned int *regs;
+
+ unsigned int start_ctrl;
+ unsigned int pwrdn_ctrl;
+ unsigned int mask_com_pcs_ready;
+ /* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
+ unsigned int phy_status;
+
+ /* true, if PHY has a separate PHY_COM control block */
+ bool has_phy_com_ctrl;
+ /* true, if PHY has a reset for individual lanes */
+ bool has_lane_rst;
+ /* true, if PHY needs delay after POWER_DOWN */
+ bool has_pwrdn_delay;
+ /* power_down delay in usec */
+ int pwrdn_delay_min;
+ int pwrdn_delay_max;
+
+ /* true, if PHY has a separate DP_COM control block */
+ bool has_phy_dp_com_ctrl;
+ /* true, if PHY has secondary tx/rx lanes to be configured */
+ bool is_dual_lane_phy;
+
+ /* true, if PCS block has no separate SW_RESET register */
+ bool no_pcs_sw_reset;
+};
+
+struct qmp_phy_combo_cfg {
+ const struct qmp_phy_cfg *usb_cfg;
+ const struct qmp_phy_cfg *dp_cfg;
+};
+
+/**
+ * struct qmp_phy - per-lane phy descriptor
+ *
+ * @phy: generic phy
+ * @cfg: phy specific configuration
+ * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
+ * @tx: iomapped memory space for lane's tx
+ * @rx: iomapped memory space for lane's rx
+ * @pcs: iomapped memory space for lane's pcs
+ * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
+ * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
+ * @pcs_misc: iomapped memory space for lane's pcs_misc
+ * @pipe_clk: pipe clock
+ * @index: lane index
+ * @qmp: QMP phy to which this lane belongs
+ * @lane_rst: lane's reset controller
+ * @mode: current PHY mode
+ * @dp_aux_cfg: Display port aux config
+ * @dp_opts: Display port optional config
+ * @dp_clks: Display port clocks
+ */
+struct qmp_phy {
+ struct phy *phy;
+ const struct qmp_phy_cfg *cfg;
+ void __iomem *serdes;
+ void __iomem *tx;
+ void __iomem *rx;
+ void __iomem *pcs;
+ void __iomem *tx2;
+ void __iomem *rx2;
+ void __iomem *pcs_misc;
+ struct clk *pipe_clk;
+ unsigned int index;
+ struct qcom_qmp *qmp;
+ struct reset_control *lane_rst;
+ enum phy_mode mode;
+ unsigned int dp_aux_cfg;
+ struct phy_configure_opts_dp dp_opts;
+ struct qmp_phy_dp_clks *dp_clks;
+};
+
+struct qmp_phy_dp_clks {
+ struct qmp_phy *qphy;
+ struct clk_hw dp_link_hw;
+ struct clk_hw dp_pixel_hw;
+};
+
+/**
+ * struct qcom_qmp - structure holding QMP phy block attributes
+ *
+ * @dev: device
+ * @dp_com: iomapped memory space for phy's dp_com control block
+ *
+ * @clks: array of clocks required by phy
+ * @resets: array of resets required by phy
+ * @vregs: regulator supplies bulk data
+ *
+ * @phys: array of per-lane phy descriptors
+ * @phy_mutex: mutex lock for PHY common block initialization
+ * @init_count: phy common block initialization count
+ * @ufs_reset: optional UFS PHY reset handle
+ */
+struct qcom_qmp {
+ struct device *dev;
+ void __iomem *dp_com;
+
+ struct clk_bulk_data *clks;
+ struct reset_control **resets;
+ struct regulator_bulk_data *vregs;
+
+ struct qmp_phy **phys;
+
+ struct mutex phy_mutex;
+ int init_count;
+
+ struct reset_control *ufs_reset;
+};
+
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
+
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
+
+static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg |= val;
+ writel(reg, base + offset);
+
+ /* ensure that above write is through */
+ readl(base + offset);
+}
+
+static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg &= ~val;
+ writel(reg, base + offset);
+
+ /* ensure that above write is through */
+ readl(base + offset);
+}
+
+/* list of clocks required by phy */
+static const char * const msm8996_phy_clk_l[] = {
+ "aux", "cfg_ahb", "ref",
+};
+
+static const char * const msm8996_ufs_phy_clk_l[] = {
+ "ref",
+};
+
+static const char * const qmp_v3_phy_clk_l[] = {
+ "aux", "cfg_ahb", "ref", "com_aux",
+};
+
+static const char * const sdm845_pciephy_clk_l[] = {
+ "aux", "cfg_ahb", "ref", "refgen",
+};
+
+static const char * const qmp_v4_phy_clk_l[] = {
+ "aux", "ref_clk_src", "ref", "com_aux",
+};
+
+/* the primary usb3 phy on sm8250 doesn't have a ref clock */
+static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
+ "aux", "ref_clk_src", "com_aux"
+};
+
+static const char * const sm8450_ufs_phy_clk_l[] = {
+ "qref", "ref", "ref_aux",
+};
+
+static const char * const sdm845_ufs_phy_clk_l[] = {
+ "ref", "ref_aux",
+};
+
+/* usb3 phy on sdx55 doesn't have com_aux clock */
+static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
+ "aux", "cfg_ahb", "ref"
+};
+
+static const char * const qcm2290_usb3phy_clk_l[] = {
+ "cfg_ahb", "ref", "com_aux",
+};
+
+/* list of resets */
+static const char * const msm8996_pciephy_reset_l[] = {
+ "phy", "common", "cfg",
+};
+
+static const char * const msm8996_usb3phy_reset_l[] = {
+ "phy", "common",
+};
+
+static const char * const sc7180_usb3phy_reset_l[] = {
+ "phy",
+};
+
+static const char * const qcm2290_usb3phy_reset_l[] = {
+ "phy_phy", "phy",
+};
+
+static const char * const sdm845_pciephy_reset_l[] = {
+ "phy",
+};
+
+/* list of regulators */
+static const char * const qmp_phy_vreg_l[] = {
+ "vdda-phy", "vdda-pll",
+};
+
+static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
+ .tx_tbl = msm8996_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
+ .rx_tbl = ipq8074_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_usb3_rx_tbl),
+ .pcs_tbl = ipq8074_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+};
+
+static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 3,
+
+ .serdes_tbl = msm8996_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl),
+ .tx_tbl = msm8996_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl),
+ .rx_tbl = msm8996_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl),
+ .pcs_tbl = msm8996_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | PLL_READY_GATE_EN,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .mask_com_pcs_ready = PCS_READY,
+ .phy_status = PHYSTATUS,
+
+ .has_phy_com_ctrl = true,
+ .has_lane_rst = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg msm8996_ufs_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8996_ufs_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes_tbl),
+ .tx_tbl = msm8996_ufs_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx_tbl),
+ .rx_tbl = msm8996_ufs_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx_tbl),
+
+ .clk_list = msm8996_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l),
+
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+
+ .regs = msm8996_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8996_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl),
+ .tx_tbl = msm8996_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
+ .rx_tbl = msm8996_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_usb3_rx_tbl),
+ .pcs_tbl = msm8996_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8996_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+};
+
+static const char * const ipq8074_pciephy_clk_l[] = {
+ "aux", "cfg_ahb",
+};
+/* list of resets */
+static const char * const ipq8074_pciephy_reset_l[] = {
+ "phy", "common",
+};
+
+static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
+ .tx_tbl = ipq8074_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_tx_tbl),
+ .rx_tbl = ipq8074_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
+ .pcs_tbl = ipq8074_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq6018_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
+ .tx_tbl = ipq6018_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq6018_pcie_tx_tbl),
+ .rx_tbl = ipq6018_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
+ .pcs_tbl = ipq6018_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = ipq_pciephy_gen3_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sdm845_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_serdes_tbl),
+ .tx_tbl = sdm845_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_tx_tbl),
+ .rx_tbl = sdm845_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_rx_tbl),
+ .pcs_tbl = sdm845_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sdm845_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_qmp_pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sdm845_qhp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_serdes_tbl),
+ .tx_tbl = sdm845_qhp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_tx_tbl),
+ .rx_tbl = sdm845_qhp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_rx_tbl),
+ .pcs_tbl = sdm845_qhp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_pcs_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_qhp_pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
+ .serdes_tbl_sec = sm8250_qmp_gen3x1_pcie_serdes_tbl,
+ .serdes_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_serdes_tbl),
+ .tx_tbl = sm8250_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
+ .rx_tbl = sm8250_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
+ .rx_tbl_sec = sm8250_qmp_gen3x1_pcie_rx_tbl,
+ .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_rx_tbl),
+ .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
+ .pcs_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_tbl,
+ .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
+ .pcs_misc_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
+ .tx_tbl = sm8250_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
+ .tx_tbl_sec = sm8250_qmp_gen3x2_pcie_tx_tbl,
+ .tx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_tx_tbl),
+ .rx_tbl = sm8250_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
+ .rx_tbl_sec = sm8250_qmp_gen3x2_pcie_rx_tbl,
+ .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_rx_tbl),
+ .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
+ .pcs_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_tbl,
+ .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
+ .pcs_misc_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .tx_tbl = qmp_v3_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
+ .usb_cfg = &sc7180_usb3phy_cfg,
+ .dp_cfg = &sc7180_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sdm845_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
+ .tx_tbl = sdm845_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
+ .rx_tbl = sdm845_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
+ .pcs_tbl = sdm845_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 1,
+
+ .serdes_tbl = sm6115_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
+ .tx_tbl = sm6115_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
+ .rx_tbl = sm6115_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
+ .pcs_tbl = sm6115_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm6115_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .is_dual_lane_phy = false,
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8998_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl),
+ .tx_tbl = msm8998_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8998_pcie_tx_tbl),
+ .rx_tbl = msm8998_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8998_pcie_rx_tbl),
+ .pcs_tbl = msm8998_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+};
+
+static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8998_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
+ .tx_tbl = msm8998_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8998_usb3_tx_tbl),
+ .rx_tbl = msm8998_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
+ .pcs_tbl = msm8998_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8150_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
+ .tx_tbl = sm8150_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
+ .rx_tbl = sm8150_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
+ .pcs_tbl = sm8150_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8150_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_tx_tbl),
+ .rx_tbl = sm8150_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
+ .pcs_tbl = sm8150_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sc8180x_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_serdes_tbl),
+ .tx_tbl = sc8180x_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl),
+ .rx_tbl = sc8180x_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_rx_tbl),
+ .pcs_tbl = sc8180x_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sc8180x_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .tx_tbl = qmp_v4_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
+ .usb_cfg = &sm8150_usb3phy_cfg,
+ .dp_cfg = &sc8180x_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8150_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8150_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8250_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_tx_tbl),
+ .rx_tbl = sm8250_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
+ .pcs_tbl = sm8250_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8250_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8250_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .tx_tbl = qmp_v4_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
+ .usb_cfg = &sm8250_usb3phy_cfg,
+ .dp_cfg = &sm8250_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sdx55_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_tx_tbl),
+ .rx_tbl = sdx55_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_sdx55_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sdx55_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_serdes_tbl),
+ .tx_tbl = sdx55_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_tx_tbl),
+ .rx_tbl = sdx55_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_rx_tbl),
+ .pcs_tbl = sdx55_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sdx55_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS_4_20,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sdx65_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_tx_tbl),
+ .rx_tbl = sdx65_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_sdx55_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8350_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8350_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+ .tx_tbl = sm8350_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+ .rx_tbl = sm8350_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+ .pcs_tbl = sm8350_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8350_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_tx_tbl),
+ .rx_tbl = sm8350_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl),
+ .pcs_tbl = sm8350_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl),
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8350_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8350_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8350_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8350_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+ .tx_tbl = sm8350_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+ .rx_tbl = sm8350_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+ .pcs_tbl = sm8350_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .clk_list = sm8450_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8450_qmp_gen3x1_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl),
+ .tx_tbl = sm8450_qmp_gen3x1_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl),
+ .rx_tbl = sm8450_qmp_gen3x1_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl),
+ .pcs_tbl = sm8450_qmp_gen3x1_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8450_qmp_gen4x2_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_serdes_tbl),
+ .tx_tbl = sm8450_qmp_gen4x2_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_tx_tbl),
+ .rx_tbl = sm8450_qmp_gen4x2_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_rx_tbl),
+ .pcs_tbl = sm8450_qmp_gen4x2_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8450_qmp_gen4x2_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS_4_20,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qcm2290_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
+ .tx_tbl = qcm2290_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qcm2290_usb3_tx_tbl),
+ .rx_tbl = qcm2290_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qcm2290_usb3_rx_tbl),
+ .pcs_tbl = qcm2290_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
+ .clk_list = qcm2290_usb3phy_clk_l,
+ .num_clks = ARRAY_SIZE(qcm2290_usb3phy_clk_l),
+ .reset_list = qcm2290_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qcm2290_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static void qcom_qmp_phy_configure_lane(void __iomem *base,
+ const unsigned int *regs,
+ const struct qmp_phy_init_tbl tbl[],
+ int num,
+ u8 lane_mask)
+{
+ int i;
+ const struct qmp_phy_init_tbl *t = tbl;
+
+ if (!t)
+ return;
+
+ for (i = 0; i < num; i++, t++) {
+ if (!(t->lane_mask & lane_mask))
+ continue;
+
+ if (t->in_layout)
+ writel(t->val, base + regs[t->offset]);
+ else
+ writel(t->val, base + t->offset);
+ }
+}
+
+static void qcom_qmp_phy_configure(void __iomem *base,
+ const unsigned int *regs,
+ const struct qmp_phy_init_tbl tbl[],
+ int num)
+{
+ qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff);
+}
+
+static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
+ int serdes_tbl_num = cfg->serdes_tbl_num;
+ int ret;
+
+ qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
+ if (cfg->serdes_tbl_sec)
+ qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
+ cfg->serdes_tbl_num_sec);
+
+ if (cfg->type == PHY_TYPE_DP) {
+ switch (dp_opts->link_rate) {
+ case 1620:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_rbr,
+ cfg->serdes_tbl_rbr_num);
+ break;
+ case 2700:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr,
+ cfg->serdes_tbl_hbr_num);
+ break;
+ case 5400:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr2,
+ cfg->serdes_tbl_hbr2_num);
+ break;
+ case 8100:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr3,
+ cfg->serdes_tbl_hbr3_num);
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ }
+
+
+ if (cfg->has_phy_com_ctrl) {
+ void __iomem *status;
+ unsigned int mask, val;
+
+ qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+ SERDES_START | PCS_START);
+
+ status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
+ mask = cfg->mask_com_pcs_ready;
+
+ ret = readl_poll_timeout(status, val, (val & mask), 10,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev,
+ "phy common block init timed-out\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
+{
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ /* Turn on BIAS current for PHY/PLL */
+ writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
+ QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
+ qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN |
+ DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
+ DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(QSERDES_V3_COM_BIAS_EN |
+ QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
+ QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
+ QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
+ qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0x24, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xbb, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qphy->dp_aux_cfg = 0;
+
+ writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+ PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+ PHY_AUX_REQ_ERR_MASK,
+ qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
+}
+
+static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
+ { 0x00, 0x0c, 0x15, 0x1a },
+ { 0x02, 0x0e, 0x16, 0xff },
+ { 0x02, 0x11, 0xff, 0xff },
+ { 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
+ { 0x02, 0x12, 0x16, 0x1a },
+ { 0x09, 0x19, 0x1f, 0xff },
+ { 0x10, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
+ { 0x00, 0x0c, 0x14, 0x19 },
+ { 0x00, 0x0b, 0x12, 0xff },
+ { 0x00, 0x0b, 0xff, 0xff },
+ { 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
+ { 0x08, 0x0f, 0x16, 0x1f },
+ { 0x11, 0x1e, 0x1f, 0xff },
+ { 0x19, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
+ unsigned int drv_lvl_reg, unsigned int emp_post_reg)
+{
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ unsigned int v_level = 0, p_level = 0;
+ u8 voltage_swing_cfg, pre_emphasis_cfg;
+ int i;
+
+ for (i = 0; i < dp_opts->lanes; i++) {
+ v_level = max(v_level, dp_opts->voltage[i]);
+ p_level = max(p_level, dp_opts->pre[i]);
+ }
+
+ if (dp_opts->link_rate <= 2700) {
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
+ } else {
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
+ }
+
+ /* TODO: Move check to config check */
+ if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
+ return -EINVAL;
+
+ /* Enable MUX to use Cursor values from these registers */
+ voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
+ pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
+
+ writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
+ writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
+
+ return 0;
+}
+
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
+{
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 bias_en, drvr_en;
+
+ if (qcom_qmp_phy_configure_dp_swing(qphy,
+ QSERDES_V3_TX_TX_DRV_LVL,
+ QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
+ return;
+
+ if (dp_opts->lanes == 1) {
+ bias_en = 0x3e;
+ drvr_en = 0x13;
+ } else {
+ bias_en = 0x3f;
+ drvr_en = 0x10;
+ }
+
+ writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+}
+
+static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy)
+{
+ u32 val;
+ bool reverse = false;
+
+ val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
+
+ /*
+ * TODO: Assume orientation is CC1 for now and two lanes, need to
+ * use type-c connector to understand orientation and lanes.
+ *
+ * Otherwise val changes to be like below if this code understood
+ * the orientation of the type-c cable.
+ *
+ * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
+ * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
+ * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
+ * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
+ * if (orientation == ORIENTATION_CC2)
+ * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
+ */
+ val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
+ writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
+
+ return reverse;
+}
+
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 phy_vco_div, status;
+ unsigned long pixel_freq;
+
+ qcom_qmp_phy_configure_dp_mode(qphy);
+
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ phy_vco_div = 0x1;
+ pixel_freq = 1620000000UL / 2;
+ break;
+ case 2700:
+ phy_vco_div = 0x1;
+ pixel_freq = 2700000000UL / 2;
+ break;
+ case 5400:
+ phy_vco_div = 0x2;
+ pixel_freq = 5400000000UL / 4;
+ break;
+ case 8100:
+ phy_vco_div = 0x0;
+ pixel_freq = 8100000000UL / 6;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
+
+ clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
+ clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
+
+ writel(0x04, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ udelay(2000);
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000);
+}
+
+/*
+ * We need to calibrate the aux setting here as many times
+ * as the caller tries
+ */
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
+{
+ static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
+ u8 val;
+
+ qphy->dp_aux_cfg++;
+ qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qphy->dp_aux_cfg];
+
+ writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+
+ return 0;
+}
+
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
+{
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ /* Turn on BIAS current for PHY/PLL */
+ writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qphy->dp_aux_cfg = 0;
+
+ writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+ PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+ PHY_AUX_REQ_ERR_MASK,
+ qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
+}
+
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
+{
+ /* Program default values before writing proper values */
+ writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+
+ writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+
+ qcom_qmp_phy_configure_dp_swing(qphy,
+ QSERDES_V4_TX_TX_DRV_LVL,
+ QSERDES_V4_TX_TX_EMP_POST1_LVL);
+}
+
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 phy_vco_div, status;
+ unsigned long pixel_freq;
+ u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
+ bool reverse;
+
+ writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
+
+ reverse = qcom_qmp_phy_configure_dp_mode(qphy);
+
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+
+ writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ phy_vco_div = 0x1;
+ pixel_freq = 1620000000UL / 2;
+ break;
+ case 2700:
+ phy_vco_div = 0x1;
+ pixel_freq = 2700000000UL / 2;
+ break;
+ case 5400:
+ phy_vco_div = 0x2;
+ pixel_freq = 5400000000UL / 4;
+ break;
+ case 8100:
+ phy_vco_div = 0x0;
+ pixel_freq = 8100000000UL / 6;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
+
+ clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
+ clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
+
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ /*
+ * At least for 7nm DP PHY this has to be done after enabling link
+ * clock.
+ */
+
+ if (dp_opts->lanes == 1) {
+ bias0_en = reverse ? 0x3e : 0x15;
+ bias1_en = reverse ? 0x15 : 0x3e;
+ drvr0_en = reverse ? 0x13 : 0x10;
+ drvr1_en = reverse ? 0x10 : 0x13;
+ } else if (dp_opts->lanes == 2) {
+ bias0_en = reverse ? 0x3f : 0x15;
+ bias1_en = reverse ? 0x15 : 0x3f;
+ drvr0_en = 0x10;
+ drvr1_en = 0x10;
+ } else {
+ bias0_en = 0x3f;
+ bias1_en = 0x3f;
+ drvr0_en = 0x10;
+ drvr1_en = 0x10;
+ }
+
+ writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+
+ writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ udelay(2000);
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
+
+ writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+
+ writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+
+ return 0;
+}
+
+/*
+ * We need to calibrate the aux setting here as many times
+ * as the caller tries
+ */
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
+{
+ static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
+ u8 val;
+
+ qphy->dp_aux_cfg++;
+ qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qphy->dp_aux_cfg];
+
+ writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+
+ return 0;
+}
+
+static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ const struct phy_configure_opts_dp *dp_opts = &opts->dp;
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
+ if (qphy->dp_opts.set_voltages) {
+ cfg->configure_dp_tx(qphy);
+ qphy->dp_opts.set_voltages = 0;
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ if (cfg->calibrate_dp_phy)
+ return cfg->calibrate_dp_phy(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *dp_com = qmp->dp_com;
+ int ret, i;
+
+ mutex_lock(&qmp->phy_mutex);
+ if (qmp->init_count++) {
+ mutex_unlock(&qmp->phy_mutex);
+ return 0;
+ }
+
+ /* turn on regulator supplies */
+ ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
+ if (ret) {
+ dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
+ goto err_unlock;
+ }
+
+ for (i = 0; i < cfg->num_resets; i++) {
+ ret = reset_control_assert(qmp->resets[i]);
+ if (ret) {
+ dev_err(qmp->dev, "%s reset assert failed\n",
+ cfg->reset_list[i]);
+ goto err_disable_regulators;
+ }
+ }
+
+ for (i = cfg->num_resets - 1; i >= 0; i--) {
+ ret = reset_control_deassert(qmp->resets[i]);
+ if (ret) {
+ dev_err(qmp->dev, "%s reset deassert failed\n",
+ qphy->cfg->reset_list[i]);
+ goto err_assert_reset;
+ }
+ }
+
+ ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ if (ret)
+ goto err_assert_reset;
+
+ if (cfg->has_phy_dp_com_ctrl) {
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
+ SW_PWRDN);
+ /* override hardware control for reset of qmp phy */
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+ SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+ SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+ /* Default type-c orientation, i.e CC1 */
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
+
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
+ USB3_MODE | DP_MODE);
+
+ /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+ SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+ SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
+ }
+
+ if (cfg->has_phy_com_ctrl) {
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
+ SW_PWRDN);
+ } else {
+ if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
+ qphy_setbits(pcs,
+ cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);
+ else
+ qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL,
+ cfg->pwrdn_ctrl);
+ }
+
+ mutex_unlock(&qmp->phy_mutex);
+
+ return 0;
+
+err_assert_reset:
+ while (++i < cfg->num_resets)
+ reset_control_assert(qmp->resets[i]);
+err_disable_regulators:
+ regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+err_unlock:
+ mutex_unlock(&qmp->phy_mutex);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ int i = cfg->num_resets;
+
+ mutex_lock(&qmp->phy_mutex);
+ if (--qmp->init_count) {
+ mutex_unlock(&qmp->phy_mutex);
+ return 0;
+ }
+
+ reset_control_assert(qmp->ufs_reset);
+ if (cfg->has_phy_com_ctrl) {
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+ SERDES_START | PCS_START);
+ qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET],
+ SW_RESET);
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
+ SW_PWRDN);
+ }
+
+ while (--i >= 0)
+ reset_control_assert(qmp->resets[i]);
+
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+ regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+
+ mutex_unlock(&qmp->phy_mutex);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_init(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ int ret;
+ dev_vdbg(qmp->dev, "Initializing QMP phy\n");
+
+ if (cfg->no_pcs_sw_reset) {
+ /*
+ * Get UFS reset, which is delayed until now to avoid a
+ * circular dependency where UFS needs its PHY, but the PHY
+ * needs this UFS reset.
+ */
+ if (!qmp->ufs_reset) {
+ qmp->ufs_reset =
+ devm_reset_control_get_exclusive(qmp->dev,
+ "ufsphy");
+
+ if (IS_ERR(qmp->ufs_reset)) {
+ ret = PTR_ERR(qmp->ufs_reset);
+ dev_err(qmp->dev,
+ "failed to get UFS reset: %d\n",
+ ret);
+
+ qmp->ufs_reset = NULL;
+ return ret;
+ }
+ }
+
+ ret = reset_control_assert(qmp->ufs_reset);
+ if (ret)
+ return ret;
+ }
+
+ ret = qcom_qmp_phy_com_init(qphy);
+ if (ret)
+ return ret;
+
+ if (cfg->type == PHY_TYPE_DP)
+ cfg->dp_aux_init(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_power_on(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *tx = qphy->tx;
+ void __iomem *rx = qphy->rx;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+ void __iomem *status;
+ unsigned int mask, val, ready;
+ int ret;
+
+ qcom_qmp_phy_serdes_init(qphy);
+
+ if (cfg->has_lane_rst) {
+ ret = reset_control_deassert(qphy->lane_rst);
+ if (ret) {
+ dev_err(qmp->dev, "lane%d reset deassert failed\n",
+ qphy->index);
+ return ret;
+ }
+ }
+
+ ret = clk_prepare_enable(qphy->pipe_clk);
+ if (ret) {
+ dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
+ goto err_reset_lane;
+ }
+
+ /* Tx, Rx, and PCS configurations */
+ qcom_qmp_phy_configure_lane(tx, cfg->regs,
+ cfg->tx_tbl, cfg->tx_tbl_num, 1);
+ if (cfg->tx_tbl_sec)
+ qcom_qmp_phy_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
+ cfg->tx_tbl_num_sec, 1);
+
+ /* Configuration for other LANE for USB-DP combo PHY */
+ if (cfg->is_dual_lane_phy) {
+ qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
+ cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ if (cfg->tx_tbl_sec)
+ qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
+ cfg->tx_tbl_sec,
+ cfg->tx_tbl_num_sec, 2);
+ }
+
+ /* Configure special DP tx tunings */
+ if (cfg->type == PHY_TYPE_DP)
+ cfg->configure_dp_tx(qphy);
+
+ qcom_qmp_phy_configure_lane(rx, cfg->regs,
+ cfg->rx_tbl, cfg->rx_tbl_num, 1);
+ if (cfg->rx_tbl_sec)
+ qcom_qmp_phy_configure_lane(rx, cfg->regs,
+ cfg->rx_tbl_sec, cfg->rx_tbl_num_sec, 1);
+
+ if (cfg->is_dual_lane_phy) {
+ qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
+ cfg->rx_tbl, cfg->rx_tbl_num, 2);
+ if (cfg->rx_tbl_sec)
+ qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
+ cfg->rx_tbl_sec,
+ cfg->rx_tbl_num_sec, 2);
+ }
+
+ /* Configure link rate, swing, etc. */
+ if (cfg->type == PHY_TYPE_DP) {
+ cfg->configure_dp_phy(qphy);
+ } else {
+ qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+ if (cfg->pcs_tbl_sec)
+ qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
+ cfg->pcs_tbl_num_sec);
+ }
+
+ ret = reset_control_deassert(qmp->ufs_reset);
+ if (ret)
+ goto err_disable_pipe_clk;
+
+ qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
+ cfg->pcs_misc_tbl_num);
+ if (cfg->pcs_misc_tbl_sec)
+ qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
+ cfg->pcs_misc_tbl_num_sec);
+
+ /*
+ * Pull out PHY from POWER DOWN state.
+ * This is active low enable signal to power-down PHY.
+ */
+ if(cfg->type == PHY_TYPE_PCIE)
+ qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
+
+ if (cfg->has_pwrdn_delay)
+ usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
+
+ if (cfg->type != PHY_TYPE_DP) {
+ /* Pull PHY out of reset state */
+ if (!cfg->no_pcs_sw_reset)
+ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+ /* start SerDes and Phy-Coding-Sublayer */
+ qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+ if (cfg->type == PHY_TYPE_UFS) {
+ status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
+ mask = PCS_READY;
+ ready = PCS_READY;
+ } else {
+ status = pcs + cfg->regs[QPHY_PCS_STATUS];
+ mask = cfg->phy_status;
+ ready = 0;
+ }
+
+ ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev, "phy initialization timed-out\n");
+ goto err_disable_pipe_clk;
+ }
+ }
+ return 0;
+
+err_disable_pipe_clk:
+ clk_disable_unprepare(qphy->pipe_clk);
+err_reset_lane:
+ if (cfg->has_lane_rst)
+ reset_control_assert(qphy->lane_rst);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_power_off(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ clk_disable_unprepare(qphy->pipe_clk);
+
+ if (cfg->type == PHY_TYPE_DP) {
+ /* Assert DP PHY power down */
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ } else {
+ /* PHY reset */
+ if (!cfg->no_pcs_sw_reset)
+ qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+
+ /* stop SerDes and Phy-Coding-Sublayer */
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+ /* Put PHY into POWER DOWN state: active low */
+ if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);
+ } else {
+ qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL,
+ cfg->pwrdn_ctrl);
+ }
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_phy_exit(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ if (cfg->has_lane_rst)
+ reset_control_assert(qphy->lane_rst);
+
+ qcom_qmp_phy_com_exit(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_enable(struct phy *phy)
+{
+ int ret;
+
+ ret = qcom_qmp_phy_init(phy);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_power_on(phy);
+ if (ret)
+ qcom_qmp_phy_exit(phy);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_disable(struct phy *phy)
+{
+ int ret;
+
+ ret = qcom_qmp_phy_power_off(phy);
+ if (ret)
+ return ret;
+ return qcom_qmp_phy_exit(phy);
+}
+
+static int qcom_qmp_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+
+ qphy->mode = mode;
+
+ return 0;
+}
+
+static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+ u32 intr_mask;
+
+ if (qphy->mode == PHY_MODE_USB_HOST_SS ||
+ qphy->mode == PHY_MODE_USB_DEVICE_SS)
+ intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
+ else
+ intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
+
+ /* Clear any pending interrupts status */
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ /* Writing 1 followed by 0 clears the interrupt */
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
+
+ /* Enable required PHY autonomous mode interrupts */
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
+
+ /* Enable i/o clamp_n for autonomous mode */
+ if (pcs_misc)
+ qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
+}
+
+static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+
+ /* Disable i/o clamp_n on resume for normal mode */
+ if (pcs_misc)
+ qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
+
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
+
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ /* Writing 1 followed by 0 clears the interrupt */
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+}
+
+static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_phy *qphy = qmp->phys[0];
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
+
+ /* Supported only for USB3 PHY and luckily USB3 is the first phy */
+ if (cfg->type != PHY_TYPE_USB3)
+ return 0;
+
+ if (!qmp->init_count) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ qcom_qmp_phy_enable_autonomous_mode(qphy);
+
+ clk_disable_unprepare(qphy->pipe_clk);
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+ return 0;
+}
+
+static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_phy *qphy = qmp->phys[0];
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ int ret = 0;
+
+ dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
+
+ /* Supported only for USB3 PHY and luckily USB3 is the first phy */
+ if (cfg->type != PHY_TYPE_USB3)
+ return 0;
+
+ if (!qmp->init_count) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(qphy->pipe_clk);
+ if (ret) {
+ dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+ return ret;
+ }
+
+ qcom_qmp_phy_disable_autonomous_mode(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int num = cfg->num_vregs;
+ int i;
+
+ qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
+ if (!qmp->vregs)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++)
+ qmp->vregs[i].supply = cfg->vreg_list[i];
+
+ return devm_regulator_bulk_get(dev, num, qmp->vregs);
+}
+
+static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int i;
+
+ qmp->resets = devm_kcalloc(dev, cfg->num_resets,
+ sizeof(*qmp->resets), GFP_KERNEL);
+ if (!qmp->resets)
+ return -ENOMEM;
+
+ for (i = 0; i < cfg->num_resets; i++) {
+ struct reset_control *rst;
+ const char *name = cfg->reset_list[i];
+
+ rst = devm_reset_control_get_exclusive(dev, name);
+ if (IS_ERR(rst)) {
+ dev_err(dev, "failed to get %s reset\n", name);
+ return PTR_ERR(rst);
+ }
+ qmp->resets[i] = rst;
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int num = cfg->num_clks;
+ int i;
+
+ qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
+ if (!qmp->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++)
+ qmp->clks[i].id = cfg->clk_list[i];
+
+ return devm_clk_bulk_get(dev, num, qmp->clks);
+}
+
+static void phy_clk_release_provider(void *res)
+{
+ of_clk_del_provider(res);
+}
+
+/*
+ * Register a fixed rate pipe clock.
+ *
+ * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
+ * controls it. The <s>_pipe_clk coming out of the GCC is requested
+ * by the PHY driver for its operations.
+ * We register the <s>_pipe_clksrc here. The gcc driver takes care
+ * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
+ * Below picture shows this relationship.
+ *
+ * +---------------+
+ * | PHY block |<<---------------------------------------+
+ * | | |
+ * | +-------+ | +-----+ |
+ * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
+ * clk | +-------+ | +-----+
+ * +---------------+
+ */
+static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
+{
+ struct clk_fixed_rate *fixed;
+ struct clk_init_data init = { };
+ int ret;
+
+ ret = of_property_read_string(np, "clock-output-names", &init.name);
+ if (ret) {
+ dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
+ return ret;
+ }
+
+ fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
+ if (!fixed)
+ return -ENOMEM;
+
+ init.ops = &clk_fixed_rate_ops;
+
+ /* controllers using QMP phys use 125MHz pipe clock interface */
+ fixed->fixed_rate = 125000000;
+ fixed->hw.init = &init;
+
+ ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
+ if (ret)
+ return ret;
+
+ /*
+ * Roll a devm action because the clock provider is the child node, but
+ * the child node is not actually a device.
+ */
+ return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
+}
+
+/*
+ * Display Port PLL driver block diagram for branch clocks
+ *
+ * +------------------------------+
+ * | DP_VCO_CLK |
+ * | |
+ * | +-------------------+ |
+ * | | (DP PLL/VCO) | |
+ * | +---------+---------+ |
+ * | v |
+ * | +----------+-----------+ |
+ * | | hsclk_divsel_clk_src | |
+ * | +----------+-----------+ |
+ * +------------------------------+
+ * |
+ * +---------<---------v------------>----------+
+ * | |
+ * +--------v----------------+ |
+ * | dp_phy_pll_link_clk | |
+ * | link_clk | |
+ * +--------+----------------+ |
+ * | |
+ * | |
+ * v v
+ * Input to DISPCC block |
+ * for link clk, crypto clk |
+ * and interface clock |
+ * |
+ * |
+ * +--------<------------+-----------------+---<---+
+ * | | |
+ * +----v---------+ +--------v-----+ +--------v------+
+ * | vco_divided | | vco_divided | | vco_divided |
+ * | _clk_src | | _clk_src | | _clk_src |
+ * | | | | | |
+ * |divsel_six | | divsel_two | | divsel_four |
+ * +-------+------+ +-----+--------+ +--------+------+
+ * | | |
+ * v---->----------v-------------<------v
+ * |
+ * +----------+-----------------+
+ * | dp_phy_pll_vco_div_clk |
+ * +---------+------------------+
+ * |
+ * v
+ * Input to DISPCC block
+ * for DP pixel clock
+ *
+ */
+static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 1620000000UL / 2:
+ case 2700000000UL / 2:
+ /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qmp_phy_dp_clks *dp_clks;
+ const struct qmp_phy *qphy;
+ const struct phy_configure_opts_dp *dp_opts;
+
+ dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
+ qphy = dp_clks->qphy;
+ dp_opts = &qphy->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ return 1620000000UL / 2;
+ case 2700:
+ return 2700000000UL / 2;
+ case 5400:
+ return 5400000000UL / 4;
+ case 8100:
+ return 8100000000UL / 6;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = {
+ .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate,
+ .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate,
+};
+
+static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 162000000:
+ case 270000000:
+ case 540000000:
+ case 810000000:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qmp_phy_dp_clks *dp_clks;
+ const struct qmp_phy *qphy;
+ const struct phy_configure_opts_dp *dp_opts;
+
+ dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
+ qphy = dp_clks->qphy;
+ dp_opts = &qphy->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ case 2700:
+ case 5400:
+ case 8100:
+ return dp_opts->link_rate * 100000;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_qmp_dp_link_clk_ops = {
+ .determine_rate = qcom_qmp_dp_link_clk_determine_rate,
+ .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate,
+};
+
+static struct clk_hw *
+qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct qmp_phy_dp_clks *dp_clks = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx >= 2) {
+ pr_err("%s: invalid index %u\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (idx == 0)
+ return &dp_clks->dp_link_hw;
+
+ return &dp_clks->dp_pixel_hw;
+}
+
+static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
+ struct device_node *np)
+{
+ struct clk_init_data init = { };
+ struct qmp_phy_dp_clks *dp_clks;
+ char name[64];
+ int ret;
+
+ dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
+ if (!dp_clks)
+ return -ENOMEM;
+
+ dp_clks->qphy = qphy;
+ qphy->dp_clks = dp_clks;
+
+ snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
+ init.ops = &qcom_qmp_dp_link_clk_ops;
+ init.name = name;
+ dp_clks->dp_link_hw.init = &init;
+ ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
+ if (ret)
+ return ret;
+
+ snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev));
+ init.ops = &qcom_qmp_dp_pixel_clk_ops;
+ init.name = name;
+ dp_clks->dp_pixel_hw.init = &init;
+ ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks);
+ if (ret)
+ return ret;
+
+ /*
+ * Roll a devm action because the clock provider is the child node, but
+ * the child node is not actually a device.
+ */
+ return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
+}
+
+static const struct phy_ops qcom_qmp_phy_gen_ops = {
+ .init = qcom_qmp_phy_enable,
+ .exit = qcom_qmp_phy_disable,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops qcom_qmp_phy_dp_ops = {
+ .init = qcom_qmp_phy_init,
+ .configure = qcom_qmp_dp_phy_configure,
+ .power_on = qcom_qmp_phy_power_on,
+ .calibrate = qcom_qmp_dp_phy_calibrate,
+ .power_off = qcom_qmp_phy_power_off,
+ .exit = qcom_qmp_phy_exit,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
+ .power_on = qcom_qmp_phy_enable,
+ .power_off = qcom_qmp_phy_disable,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static void qcom_qmp_reset_control_put(void *data)
+{
+ reset_control_put(data);
+}
+
+static
+int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
+ void __iomem *serdes, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct phy *generic_phy;
+ struct qmp_phy *qphy;
+ const struct phy_ops *ops;
+ char prop_name[MAX_PROP_NAME];
+ int ret;
+
+ qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
+ if (!qphy)
+ return -ENOMEM;
+
+ qphy->cfg = cfg;
+ qphy->serdes = serdes;
+ /*
+ * Get memory resources for each phy lane:
+ * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
+ * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
+ * For single lane PHYs: pcs_misc (optional) -> 3.
+ */
+ qphy->tx = of_iomap(np, 0);
+ if (!qphy->tx)
+ return -ENOMEM;
+
+ qphy->rx = of_iomap(np, 1);
+ if (!qphy->rx)
+ return -ENOMEM;
+
+ qphy->pcs = of_iomap(np, 2);
+ if (!qphy->pcs)
+ return -ENOMEM;
+
+ /*
+ * If this is a dual-lane PHY, then there should be registers for the
+ * second lane. Some old device trees did not specify this, so fall
+ * back to old legacy behavior of assuming they can be reached at an
+ * offset from the first lane.
+ */
+ if (cfg->is_dual_lane_phy) {
+ qphy->tx2 = of_iomap(np, 3);
+ qphy->rx2 = of_iomap(np, 4);
+ if (!qphy->tx2 || !qphy->rx2) {
+ dev_warn(dev,
+ "Underspecified device tree, falling back to legacy register regions\n");
+
+ /* In the old version, pcs_misc is at index 3. */
+ qphy->pcs_misc = qphy->tx2;
+ qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
+ qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
+
+ } else {
+ qphy->pcs_misc = of_iomap(np, 5);
+ }
+
+ } else {
+ qphy->pcs_misc = of_iomap(np, 3);
+ }
+
+ if (!qphy->pcs_misc)
+ dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
+
+ /*
+ * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
+ * based phys, so they essentially have pipe clock. So,
+ * we return error in case phy is USB3 or PIPE type.
+ * Otherwise, we initialize pipe clock to NULL for
+ * all phys that don't need this.
+ */
+ snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
+ qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
+ if (IS_ERR(qphy->pipe_clk)) {
+ if (cfg->type == PHY_TYPE_PCIE ||
+ cfg->type == PHY_TYPE_USB3) {
+ ret = PTR_ERR(qphy->pipe_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev,
+ "failed to get lane%d pipe_clk, %d\n",
+ id, ret);
+ return ret;
+ }
+ qphy->pipe_clk = NULL;
+ }
+
+ /* Get lane reset, if any */
+ if (cfg->has_lane_rst) {
+ snprintf(prop_name, sizeof(prop_name), "lane%d", id);
+ qphy->lane_rst = of_reset_control_get_exclusive(np, prop_name);
+ if (IS_ERR(qphy->lane_rst)) {
+ dev_err(dev, "failed to get lane%d reset\n", id);
+ return PTR_ERR(qphy->lane_rst);
+ }
+ ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put,
+ qphy->lane_rst);
+ if (ret)
+ return ret;
+ }
+
+ if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE)
+ ops = &qcom_qmp_pcie_ufs_ops;
+ else if (cfg->type == PHY_TYPE_DP)
+ ops = &qcom_qmp_phy_dp_ops;
+ else
+ ops = &qcom_qmp_phy_gen_ops;
+
+ generic_phy = devm_phy_create(dev, np, ops);
+ if (IS_ERR(generic_phy)) {
+ ret = PTR_ERR(generic_phy);
+ dev_err(dev, "failed to create qphy %d\n", ret);
+ return ret;
+ }
+
+ qphy->phy = generic_phy;
+ qphy->index = id;
+ qphy->qmp = qmp;
+ qmp->phys[id] = qphy;
+ phy_set_drvdata(generic_phy, qphy);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,ipq8074-qmp-usb3-phy",
+ .data = &ipq8074_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-pcie-phy",
+ .data = &msm8996_pciephy_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-ufs-phy",
+ .data = &msm8996_ufs_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-usb3-phy",
+ .data = &msm8996_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-pcie-phy",
+ .data = &msm8998_pciephy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,ipq8074-qmp-pcie-phy",
+ .data = &ipq8074_pciephy_cfg,
+ }, {
+ .compatible = "qcom,ipq6018-qmp-pcie-phy",
+ .data = &ipq6018_pciephy_cfg,
+ }, {
+ .compatible = "qcom,ipq6018-qmp-usb3-phy",
+ .data = &ipq8074_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc7180-qmp-usb3-phy",
+ .data = &sc7180_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sc8180x-qmp-pcie-phy",
+ .data = &sc8180x_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sc8280xp-qmp-ufs-phy",
+ .data = &sm8350_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-usb3-phy",
+ .data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sdm845-qhp-pcie-phy",
+ .data = &sdm845_qhp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-pcie-phy",
+ .data = &sdm845_qmp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-usb3-phy",
+ .data = &qmp_v3_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-usb3-uni-phy",
+ .data = &qmp_v3_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-usb3-phy",
+ .data = &msm8998_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm6115-qmp-ufs-phy",
+ .data = &sm6115_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm6350-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-phy",
+ .data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-uni-phy",
+ .data = &sm8150_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-phy",
+ .data = &sm8250_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-uni-phy",
+ .data = &sm8250_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy",
+ .data = &sm8250_qmp_gen3x1_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy",
+ .data = &sm8250_qmp_gen3x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-ufs-phy",
+ .data = &sm8350_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-modem-pcie-phy",
+ .data = &sm8250_qmp_gen3x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdx55-qmp-pcie-phy",
+ .data = &sdx55_qmp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdx55-qmp-usb3-uni-phy",
+ .data = &sdx55_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sdx65-qmp-usb3-uni-phy",
+ .data = &sdx65_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-usb3-phy",
+ .data = &sm8350_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-usb3-uni-phy",
+ .data = &sm8350_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
+ .data = &sm8450_qmp_gen3x1_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
+ .data = &sm8450_qmp_gen4x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-ufs-phy",
+ .data = &sm8450_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-usb3-phy",
+ .data = &sm8350_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,qcm2290-qmp-usb3-phy",
+ .data = &qcm2290_usb3phy_cfg,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
+
+static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ .data = &sc7180_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ .data = &sm8250_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ .data = &sc8180x_usb3dpphy_cfg,
+ },
+ { }
+};
+
+static const struct dev_pm_ops qcom_qmp_phy_pm_ops = {
+ SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend,
+ qcom_qmp_phy_runtime_resume, NULL)
+};
+
+static int qcom_qmp_phy_probe(struct platform_device *pdev)
+{
+ struct qcom_qmp *qmp;
+ struct device *dev = &pdev->dev;
+ struct device_node *child;
+ struct phy_provider *phy_provider;
+ void __iomem *serdes;
+ void __iomem *usb_serdes;
+ void __iomem *dp_serdes = NULL;
+ const struct qmp_phy_combo_cfg *combo_cfg = NULL;
+ const struct qmp_phy_cfg *cfg = NULL;
+ const struct qmp_phy_cfg *usb_cfg = NULL;
+ const struct qmp_phy_cfg *dp_cfg = NULL;
+ int num, id, expected_phys;
+ int ret;
+
+ qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
+ if (!qmp)
+ return -ENOMEM;
+
+ qmp->dev = dev;
+ dev_set_drvdata(dev, qmp);
+
+ /* Get the specific init parameters of QMP phy */
+ cfg = of_device_get_match_data(dev);
+ if (!cfg) {
+ const struct of_device_id *match;
+
+ match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev);
+ if (!match)
+ return -EINVAL;
+
+ combo_cfg = match->data;
+ if (!combo_cfg)
+ return -EINVAL;
+
+ usb_cfg = combo_cfg->usb_cfg;
+ cfg = usb_cfg; /* Setup clks and regulators */
+ }
+
+ /* per PHY serdes; usually located at base address */
+ usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(serdes))
+ return PTR_ERR(serdes);
+
+ /* per PHY dp_com; if PHY has dp_com control block */
+ if (combo_cfg || cfg->has_phy_dp_com_ctrl) {
+ qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(qmp->dp_com))
+ return PTR_ERR(qmp->dp_com);
+ }
+
+ if (combo_cfg) {
+ /* Only two serdes for combo PHY */
+ dp_serdes = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(dp_serdes))
+ return PTR_ERR(dp_serdes);
+
+ dp_cfg = combo_cfg->dp_cfg;
+ expected_phys = 2;
+ } else {
+ expected_phys = cfg->nlanes;
+ }
+
+ mutex_init(&qmp->phy_mutex);
+
+ ret = qcom_qmp_phy_clk_init(dev, cfg);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_reset_init(dev, cfg);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_vreg_init(dev, cfg);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get regulator supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ num = of_get_available_child_count(dev->of_node);
+ /* do we have a rogue child node ? */
+ if (num > expected_phys)
+ return -EINVAL;
+
+ qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
+ if (!qmp->phys)
+ return -ENOMEM;
+
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ /*
+ * Prevent runtime pm from being ON by default. Users can enable
+ * it using power/control in sysfs.
+ */
+ pm_runtime_forbid(dev);
+
+ id = 0;
+ for_each_available_child_of_node(dev->of_node, child) {
+ if (of_node_name_eq(child, "dp-phy")) {
+ cfg = dp_cfg;
+ serdes = dp_serdes;
+ } else if (of_node_name_eq(child, "usb3-phy")) {
+ cfg = usb_cfg;
+ serdes = usb_serdes;
+ }
+
+ /* Create per-lane phy */
+ ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg);
+ if (ret) {
+ dev_err(dev, "failed to create lane%d phy, %d\n",
+ id, ret);
+ goto err_node_put;
+ }
+
+ /*
+ * Register the pipe clock provided by phy.
+ * See function description to see details of this pipe clock.
+ */
+ if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) {
+ ret = phy_pipe_clk_register(qmp, child);
+ if (ret) {
+ dev_err(qmp->dev,
+ "failed to register pipe clock source\n");
+ goto err_node_put;
+ }
+ } else if (cfg->type == PHY_TYPE_DP) {
+ ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
+ if (ret) {
+ dev_err(qmp->dev,
+ "failed to register DP clock source\n");
+ goto err_node_put;
+ }
+ }
+ id++;
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (!IS_ERR(phy_provider))
+ dev_info(dev, "Registered Qcom-QMP phy\n");
+ else
+ pm_runtime_disable(dev);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+
+err_node_put:
+ pm_runtime_disable(dev);
+ of_node_put(child);
+ return ret;
+}
+
+static struct platform_driver qcom_qmp_phy_driver = {
+ .probe = qcom_qmp_phy_probe,
+ .driver = {
+ .name = "qcom-qmp-phy",
+ .pm = &qcom_qmp_phy_pm_ops,
+ .of_match_table = qcom_qmp_phy_of_match_table,
+ },
+};
+
+module_platform_driver(qcom_qmp_phy_driver);
+
+MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm QMP PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
new file mode 100644
index 000000000000..c7309e981bfb
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -0,0 +1,6350 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#include "phy-qcom-qmp.h"
+
+/* QPHY_SW_RESET bit */
+#define SW_RESET BIT(0)
+/* QPHY_POWER_DOWN_CONTROL */
+#define SW_PWRDN BIT(0)
+#define REFCLK_DRV_DSBL BIT(1)
+/* QPHY_START_CONTROL bits */
+#define SERDES_START BIT(0)
+#define PCS_START BIT(1)
+#define PLL_READY_GATE_EN BIT(3)
+/* QPHY_PCS_STATUS bit */
+#define PHYSTATUS BIT(6)
+#define PHYSTATUS_4_20 BIT(7)
+/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
+#define PCS_READY BIT(0)
+
+/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
+/* DP PHY soft reset */
+#define SW_DPPHY_RESET BIT(0)
+/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
+#define SW_DPPHY_RESET_MUX BIT(1)
+/* USB3 PHY soft reset */
+#define SW_USB3PHY_RESET BIT(2)
+/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
+#define SW_USB3PHY_RESET_MUX BIT(3)
+
+/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
+#define USB3_MODE BIT(0) /* enables USB3 mode */
+#define DP_MODE BIT(1) /* enables DP mode */
+
+/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
+#define ARCVR_DTCT_EN BIT(0)
+#define ALFPS_DTCT_EN BIT(1)
+#define ARCVR_DTCT_EVENT_SEL BIT(4)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
+#define IRQ_CLEAR BIT(0)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
+#define RCVR_DETECT BIT(0)
+
+/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
+#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
+
+#define PHY_INIT_COMPLETE_TIMEOUT 10000
+#define POWER_DOWN_DELAY_US_MIN 10
+#define POWER_DOWN_DELAY_US_MAX 11
+
+#define MAX_PROP_NAME 32
+
+/* Define the assumed distance between lanes for underspecified device trees. */
+#define QMP_PHY_LEGACY_LANE_STRIDE 0x400
+
+struct qmp_phy_init_tbl {
+ unsigned int offset;
+ unsigned int val;
+ /*
+ * register part of layout ?
+ * if yes, then offset gives index in the reg-layout
+ */
+ bool in_layout;
+ /*
+ * mask of lanes for which this register is written
+ * for cases when second lane needs different values
+ */
+ u8 lane_mask;
+};
+
+#define QMP_PHY_INIT_CFG(o, v) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .lane_mask = 0xff, \
+ }
+
+#define QMP_PHY_INIT_CFG_L(o, v) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .in_layout = true, \
+ .lane_mask = 0xff, \
+ }
+
+#define QMP_PHY_INIT_CFG_LANE(o, v, l) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .lane_mask = l, \
+ }
+
+/* set of registers with offsets different per-PHY */
+enum qphy_reg_layout {
+ /* Common block control registers */
+ QPHY_COM_SW_RESET,
+ QPHY_COM_POWER_DOWN_CONTROL,
+ QPHY_COM_START_CONTROL,
+ QPHY_COM_PCS_READY_STATUS,
+ /* PCS registers */
+ QPHY_PLL_LOCK_CHK_DLY_TIME,
+ QPHY_FLL_CNTRL1,
+ QPHY_FLL_CNTRL2,
+ QPHY_FLL_CNT_VAL_L,
+ QPHY_FLL_CNT_VAL_H_TOL,
+ QPHY_FLL_MAN_CODE,
+ QPHY_SW_RESET,
+ QPHY_START_CTRL,
+ QPHY_PCS_READY_STATUS,
+ QPHY_PCS_STATUS,
+ QPHY_PCS_AUTONOMOUS_MODE_CTRL,
+ QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
+ QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
+ QPHY_PCS_POWER_DOWN_CONTROL,
+ /* PCS_MISC registers */
+ QPHY_PCS_MISC_TYPEC_CTRL,
+ /* Keep last to ensure regs_layout arrays are properly initialized */
+ QPHY_LAYOUT_SIZE
+};
+
+static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
+static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+};
+
+static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_COM_SW_RESET] = 0x400,
+ [QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
+ [QPHY_COM_START_CONTROL] = 0x408,
+ [QPHY_COM_PCS_READY_STATUS] = 0x448,
+ [QPHY_PLL_LOCK_CHK_DLY_TIME] = 0xa8,
+ [QPHY_FLL_CNTRL1] = 0xc4,
+ [QPHY_FLL_CNTRL2] = 0xc8,
+ [QPHY_FLL_CNT_VAL_L] = 0xcc,
+ [QPHY_FLL_CNT_VAL_H_TOL] = 0xd0,
+ [QPHY_FLL_MAN_CODE] = 0xd4,
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+};
+
+static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_FLL_CNTRL1] = 0xc0,
+ [QPHY_FLL_CNTRL2] = 0xc4,
+ [QPHY_FLL_CNT_VAL_L] = 0xc8,
+ [QPHY_FLL_CNT_VAL_H_TOL] = 0xcc,
+ [QPHY_FLL_MAN_CODE] = 0xd0,
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x17c,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
+};
+
+static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
+};
+
+static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+};
+
+static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x2ac,
+};
+
+static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
+};
+
+static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
+};
+
+static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x1008,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
+};
+
+static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
+ [QPHY_PCS_STATUS] = 0x174,
+ [QPHY_PCS_MISC_TYPEC_CTRL] = 0x00,
+};
+
+static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x160,
+};
+
+static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
+static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+};
+
+static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = QPHY_V4_PCS_UFS_PHY_START,
+ [QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_UFS_READY_STATUS,
+ [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET,
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ /* PLL and Loop filter settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ /* SSC settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c),
+ QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+
+ QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05),
+
+ QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05),
+ QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04),
+ /* PLL and Loop filter settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ /* SSC settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x29),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x53),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x61),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_EQ_CONFIG5, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+ QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
+ QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_POST, 0x58),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
+ QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
+ QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
+ QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
+ QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
+ QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x007),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_01, 0x59),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xbb),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG4, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2, 0x52),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4, 0x1a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5, 0x06),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SYSCLK_EN_SEL, 0x27),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BIAS_EN_CKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_ENABLE1, 0xb0),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE0, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_RESTRIM_CTRL2, 0x05),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VCO_TUNE_MAP, 0x10),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_SELECT, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_HSCLK_SEL1, 0x30),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORE_CLK_EN, 0x73),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SVS_MODE_CLK_SEL, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV1, 0x22),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV2, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BGV_TRIM, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BG_CTRL, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL0, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_TAP_EN, 0x0d),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TX_BAND_MODE, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_LANE_MODE, 0x1a),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PARALLEL_RATE, 0x2f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE0, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE1, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE2, 0x1b),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE2, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE0, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE1, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE2, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_THRESH_DFE, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CGA_THRESH_DFE, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXENGINE_EN0, 0x12),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_TRAIN_TIME, 0x25),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_DFE_OVRLP_TIME, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_REFRESH_TIME, 0x05),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_ENABLE_TIME, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_GAIN, 0x26),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_GAIN, 0x12),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_OFFSET_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PRE_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_INTVAL, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EDAC_INITVAL, 0x28),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB0, 0x7f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB1, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RCVRDONE_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_CTRL, 0x70),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE0, 0x8b),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE2, 0x0a),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE2, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_BAND, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE0, 0x5c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE1, 0x3e),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE2, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_ENABLES, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_CNTRL, 0xa0),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_DEGLITCH_CNTRL, 0x08),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DCC_GAIN, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_EN_SIGNAL, 0xc3),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PSM_RX_EN_CAL, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_MISC_CNTRL0, 0xbc),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TS0_TIMER, 0x7f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DLL_HIGHDATARATE, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RESETCODE_OFFSET, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_INITVAL, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RSM_START, 0x01),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_rx_tbl[] = {
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_PCS_TX_RX_CONFIG, 0x50),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M3P5DB, 0x19),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M3P5DB, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M6DB, 0x17),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M6DB, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG5, 0x9f),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x50),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb5),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4c),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x64),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x0F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x1E),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0D),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5B),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_RX_PWM_GEAR_BAND, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_DRV_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),
+ QMP_PHY_INIT_CFG(QPHY_RX_SYM_RESYNC_CTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_POST_EMP_LVL, 0x12),
+ QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_POST_EMP_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL2, 0x6e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SYM_RESYNC_CTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL1, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_MIN_HIBERN8_TIME, 0x9a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
+
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x94),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x5),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x6e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x39),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x39),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x01),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x35),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x12),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P6_P7_PRE, 0x33),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_EQ_CONFIG2, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x05),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG2, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x08),
+};
+
+static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x26),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x048),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x46),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_CFG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x50),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MISC1, 0x88),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTERNAL_DIG_CORECLK_DIV, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MODE, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_DC_LEVEL_CTRL, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x56),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x22),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_3, 0x13),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_VMODE_CTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_PI_QEC_CTRL, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_FO_GAIN_RATE2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_3, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_VGA_CAL_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x27),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B0, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B1, 0xf9),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B3, 0xce),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B4, 0x62),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B0, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B3, 0xcf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B4, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_PHPRE_CTRL, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_MARG_COARSE_CTRL2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG2, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG4, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG5, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_EQ_CONFIG1, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G3_RXEQEVAL_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_RXEQEVAL_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG2, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0b),
+};
+
+static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x65),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xf5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf1),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xed),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x3c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xb7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0xb7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_INITVAL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x01),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_EQ_CONFIG2, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x46),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_CFG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0xd0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MISC1, 0x88),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_DC_LEVEL_CTRL, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xcc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xcc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x29),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0xc5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xad),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xb6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xc7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xef),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x05),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
+};
+
+/* Register names should be validated, they might be different for this PHY */
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_EQ_CONFIG1, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3, 0x28),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
+};
+
+struct qmp_phy;
+
+/* struct qmp_phy_cfg - per-PHY initialization config */
+struct qmp_phy_cfg {
+ /* phy-type - PCIE/UFS/USB */
+ unsigned int type;
+ /* number of lanes provided by phy */
+ int nlanes;
+
+ /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
+ const struct qmp_phy_init_tbl *serdes_tbl;
+ int serdes_tbl_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_sec;
+ int serdes_tbl_num_sec;
+ const struct qmp_phy_init_tbl *tx_tbl;
+ int tx_tbl_num;
+ const struct qmp_phy_init_tbl *tx_tbl_sec;
+ int tx_tbl_num_sec;
+ const struct qmp_phy_init_tbl *rx_tbl;
+ int rx_tbl_num;
+ const struct qmp_phy_init_tbl *rx_tbl_sec;
+ int rx_tbl_num_sec;
+ const struct qmp_phy_init_tbl *pcs_tbl;
+ int pcs_tbl_num;
+ const struct qmp_phy_init_tbl *pcs_tbl_sec;
+ int pcs_tbl_num_sec;
+ const struct qmp_phy_init_tbl *pcs_misc_tbl;
+ int pcs_misc_tbl_num;
+ const struct qmp_phy_init_tbl *pcs_misc_tbl_sec;
+ int pcs_misc_tbl_num_sec;
+
+ /* Init sequence for DP PHY block link rates */
+ const struct qmp_phy_init_tbl *serdes_tbl_rbr;
+ int serdes_tbl_rbr_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr;
+ int serdes_tbl_hbr_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr2;
+ int serdes_tbl_hbr2_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
+ int serdes_tbl_hbr3_num;
+
+ /* DP PHY callbacks */
+ int (*configure_dp_phy)(struct qmp_phy *qphy);
+ void (*configure_dp_tx)(struct qmp_phy *qphy);
+ int (*calibrate_dp_phy)(struct qmp_phy *qphy);
+ void (*dp_aux_init)(struct qmp_phy *qphy);
+
+ /* clock ids to be requested */
+ const char * const *clk_list;
+ int num_clks;
+ /* resets to be requested */
+ const char * const *reset_list;
+ int num_resets;
+ /* regulators to be requested */
+ const char * const *vreg_list;
+ int num_vregs;
+
+ /* array of registers with different offsets */
+ const unsigned int *regs;
+
+ unsigned int start_ctrl;
+ unsigned int pwrdn_ctrl;
+ unsigned int mask_com_pcs_ready;
+ /* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
+ unsigned int phy_status;
+
+ /* true, if PHY has a separate PHY_COM control block */
+ bool has_phy_com_ctrl;
+ /* true, if PHY has a reset for individual lanes */
+ bool has_lane_rst;
+ /* true, if PHY needs delay after POWER_DOWN */
+ bool has_pwrdn_delay;
+ /* power_down delay in usec */
+ int pwrdn_delay_min;
+ int pwrdn_delay_max;
+
+ /* true, if PHY has a separate DP_COM control block */
+ bool has_phy_dp_com_ctrl;
+ /* true, if PHY has secondary tx/rx lanes to be configured */
+ bool is_dual_lane_phy;
+
+ /* true, if PCS block has no separate SW_RESET register */
+ bool no_pcs_sw_reset;
+};
+
+struct qmp_phy_combo_cfg {
+ const struct qmp_phy_cfg *usb_cfg;
+ const struct qmp_phy_cfg *dp_cfg;
+};
+
+/**
+ * struct qmp_phy - per-lane phy descriptor
+ *
+ * @phy: generic phy
+ * @cfg: phy specific configuration
+ * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
+ * @tx: iomapped memory space for lane's tx
+ * @rx: iomapped memory space for lane's rx
+ * @pcs: iomapped memory space for lane's pcs
+ * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
+ * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
+ * @pcs_misc: iomapped memory space for lane's pcs_misc
+ * @pipe_clk: pipe clock
+ * @index: lane index
+ * @qmp: QMP phy to which this lane belongs
+ * @lane_rst: lane's reset controller
+ * @mode: current PHY mode
+ * @dp_aux_cfg: Display port aux config
+ * @dp_opts: Display port optional config
+ * @dp_clks: Display port clocks
+ */
+struct qmp_phy {
+ struct phy *phy;
+ const struct qmp_phy_cfg *cfg;
+ void __iomem *serdes;
+ void __iomem *tx;
+ void __iomem *rx;
+ void __iomem *pcs;
+ void __iomem *tx2;
+ void __iomem *rx2;
+ void __iomem *pcs_misc;
+ struct clk *pipe_clk;
+ unsigned int index;
+ struct qcom_qmp *qmp;
+ struct reset_control *lane_rst;
+ enum phy_mode mode;
+ unsigned int dp_aux_cfg;
+ struct phy_configure_opts_dp dp_opts;
+ struct qmp_phy_dp_clks *dp_clks;
+};
+
+struct qmp_phy_dp_clks {
+ struct qmp_phy *qphy;
+ struct clk_hw dp_link_hw;
+ struct clk_hw dp_pixel_hw;
+};
+
+/**
+ * struct qcom_qmp - structure holding QMP phy block attributes
+ *
+ * @dev: device
+ * @dp_com: iomapped memory space for phy's dp_com control block
+ *
+ * @clks: array of clocks required by phy
+ * @resets: array of resets required by phy
+ * @vregs: regulator supplies bulk data
+ *
+ * @phys: array of per-lane phy descriptors
+ * @phy_mutex: mutex lock for PHY common block initialization
+ * @init_count: phy common block initialization count
+ * @ufs_reset: optional UFS PHY reset handle
+ */
+struct qcom_qmp {
+ struct device *dev;
+ void __iomem *dp_com;
+
+ struct clk_bulk_data *clks;
+ struct reset_control **resets;
+ struct regulator_bulk_data *vregs;
+
+ struct qmp_phy **phys;
+
+ struct mutex phy_mutex;
+ int init_count;
+
+ struct reset_control *ufs_reset;
+};
+
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
+
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
+
+static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg |= val;
+ writel(reg, base + offset);
+
+ /* ensure that above write is through */
+ readl(base + offset);
+}
+
+static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg &= ~val;
+ writel(reg, base + offset);
+
+ /* ensure that above write is through */
+ readl(base + offset);
+}
+
+/* list of clocks required by phy */
+static const char * const msm8996_phy_clk_l[] = {
+ "aux", "cfg_ahb", "ref",
+};
+
+static const char * const msm8996_ufs_phy_clk_l[] = {
+ "ref",
+};
+
+static const char * const qmp_v3_phy_clk_l[] = {
+ "aux", "cfg_ahb", "ref", "com_aux",
+};
+
+static const char * const sdm845_pciephy_clk_l[] = {
+ "aux", "cfg_ahb", "ref", "refgen",
+};
+
+static const char * const qmp_v4_phy_clk_l[] = {
+ "aux", "ref_clk_src", "ref", "com_aux",
+};
+
+/* the primary usb3 phy on sm8250 doesn't have a ref clock */
+static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
+ "aux", "ref_clk_src", "com_aux"
+};
+
+static const char * const sm8450_ufs_phy_clk_l[] = {
+ "qref", "ref", "ref_aux",
+};
+
+static const char * const sdm845_ufs_phy_clk_l[] = {
+ "ref", "ref_aux",
+};
+
+/* usb3 phy on sdx55 doesn't have com_aux clock */
+static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
+ "aux", "cfg_ahb", "ref"
+};
+
+static const char * const qcm2290_usb3phy_clk_l[] = {
+ "cfg_ahb", "ref", "com_aux",
+};
+
+/* list of resets */
+static const char * const msm8996_pciephy_reset_l[] = {
+ "phy", "common", "cfg",
+};
+
+static const char * const msm8996_usb3phy_reset_l[] = {
+ "phy", "common",
+};
+
+static const char * const sc7180_usb3phy_reset_l[] = {
+ "phy",
+};
+
+static const char * const qcm2290_usb3phy_reset_l[] = {
+ "phy_phy", "phy",
+};
+
+static const char * const sdm845_pciephy_reset_l[] = {
+ "phy",
+};
+
+/* list of regulators */
+static const char * const qmp_phy_vreg_l[] = {
+ "vdda-phy", "vdda-pll",
+};
+
+static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
+ .tx_tbl = msm8996_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
+ .rx_tbl = ipq8074_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_usb3_rx_tbl),
+ .pcs_tbl = ipq8074_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+};
+
+static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 3,
+
+ .serdes_tbl = msm8996_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl),
+ .tx_tbl = msm8996_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl),
+ .rx_tbl = msm8996_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl),
+ .pcs_tbl = msm8996_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | PLL_READY_GATE_EN,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .mask_com_pcs_ready = PCS_READY,
+ .phy_status = PHYSTATUS,
+
+ .has_phy_com_ctrl = true,
+ .has_lane_rst = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg msm8996_ufs_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8996_ufs_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes_tbl),
+ .tx_tbl = msm8996_ufs_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx_tbl),
+ .rx_tbl = msm8996_ufs_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx_tbl),
+
+ .clk_list = msm8996_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l),
+
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+
+ .regs = msm8996_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8996_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl),
+ .tx_tbl = msm8996_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
+ .rx_tbl = msm8996_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_usb3_rx_tbl),
+ .pcs_tbl = msm8996_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8996_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+};
+
+static const char * const ipq8074_pciephy_clk_l[] = {
+ "aux", "cfg_ahb",
+};
+/* list of resets */
+static const char * const ipq8074_pciephy_reset_l[] = {
+ "phy", "common",
+};
+
+static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
+ .tx_tbl = ipq8074_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_tx_tbl),
+ .rx_tbl = ipq8074_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
+ .pcs_tbl = ipq8074_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq6018_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
+ .tx_tbl = ipq6018_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq6018_pcie_tx_tbl),
+ .rx_tbl = ipq6018_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
+ .pcs_tbl = ipq6018_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = ipq_pciephy_gen3_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sdm845_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_serdes_tbl),
+ .tx_tbl = sdm845_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_tx_tbl),
+ .rx_tbl = sdm845_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_rx_tbl),
+ .pcs_tbl = sdm845_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sdm845_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_qmp_pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sdm845_qhp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_serdes_tbl),
+ .tx_tbl = sdm845_qhp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_tx_tbl),
+ .rx_tbl = sdm845_qhp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_rx_tbl),
+ .pcs_tbl = sdm845_qhp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_pcs_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_qhp_pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
+ .serdes_tbl_sec = sm8250_qmp_gen3x1_pcie_serdes_tbl,
+ .serdes_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_serdes_tbl),
+ .tx_tbl = sm8250_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
+ .rx_tbl = sm8250_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
+ .rx_tbl_sec = sm8250_qmp_gen3x1_pcie_rx_tbl,
+ .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_rx_tbl),
+ .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
+ .pcs_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_tbl,
+ .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
+ .pcs_misc_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
+ .tx_tbl = sm8250_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
+ .tx_tbl_sec = sm8250_qmp_gen3x2_pcie_tx_tbl,
+ .tx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_tx_tbl),
+ .rx_tbl = sm8250_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
+ .rx_tbl_sec = sm8250_qmp_gen3x2_pcie_rx_tbl,
+ .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_rx_tbl),
+ .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
+ .pcs_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_tbl,
+ .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
+ .pcs_misc_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .tx_tbl = qmp_v3_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
+ .usb_cfg = &sc7180_usb3phy_cfg,
+ .dp_cfg = &sc7180_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sdm845_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
+ .tx_tbl = sdm845_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
+ .rx_tbl = sdm845_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
+ .pcs_tbl = sdm845_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 1,
+
+ .serdes_tbl = sm6115_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
+ .tx_tbl = sm6115_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
+ .rx_tbl = sm6115_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
+ .pcs_tbl = sm6115_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm6115_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .is_dual_lane_phy = false,
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8998_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl),
+ .tx_tbl = msm8998_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8998_pcie_tx_tbl),
+ .rx_tbl = msm8998_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8998_pcie_rx_tbl),
+ .pcs_tbl = msm8998_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+};
+
+static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8998_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
+ .tx_tbl = msm8998_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8998_usb3_tx_tbl),
+ .rx_tbl = msm8998_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
+ .pcs_tbl = msm8998_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8150_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
+ .tx_tbl = sm8150_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
+ .rx_tbl = sm8150_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
+ .pcs_tbl = sm8150_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8150_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_tx_tbl),
+ .rx_tbl = sm8150_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
+ .pcs_tbl = sm8150_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sc8180x_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_serdes_tbl),
+ .tx_tbl = sc8180x_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl),
+ .rx_tbl = sc8180x_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_rx_tbl),
+ .pcs_tbl = sc8180x_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sc8180x_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .tx_tbl = qmp_v4_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
+ .usb_cfg = &sm8150_usb3phy_cfg,
+ .dp_cfg = &sc8180x_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8150_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8150_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8250_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_tx_tbl),
+ .rx_tbl = sm8250_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
+ .pcs_tbl = sm8250_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8250_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8250_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .tx_tbl = qmp_v4_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
+ .usb_cfg = &sm8250_usb3phy_cfg,
+ .dp_cfg = &sm8250_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sdx55_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_tx_tbl),
+ .rx_tbl = sdx55_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_sdx55_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sdx55_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_serdes_tbl),
+ .tx_tbl = sdx55_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_tx_tbl),
+ .rx_tbl = sdx55_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_rx_tbl),
+ .pcs_tbl = sdx55_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sdx55_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS_4_20,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sdx65_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_tx_tbl),
+ .rx_tbl = sdx65_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_sdx55_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8350_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8350_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+ .tx_tbl = sm8350_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+ .rx_tbl = sm8350_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+ .pcs_tbl = sm8350_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8350_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_tx_tbl),
+ .rx_tbl = sm8350_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl),
+ .pcs_tbl = sm8350_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl),
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8350_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8350_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8350_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8350_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+ .tx_tbl = sm8350_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+ .rx_tbl = sm8350_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+ .pcs_tbl = sm8350_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .clk_list = sm8450_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8450_qmp_gen3x1_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl),
+ .tx_tbl = sm8450_qmp_gen3x1_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl),
+ .rx_tbl = sm8450_qmp_gen3x1_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl),
+ .pcs_tbl = sm8450_qmp_gen3x1_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8450_qmp_gen4x2_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_serdes_tbl),
+ .tx_tbl = sm8450_qmp_gen4x2_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_tx_tbl),
+ .rx_tbl = sm8450_qmp_gen4x2_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_rx_tbl),
+ .pcs_tbl = sm8450_qmp_gen4x2_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8450_qmp_gen4x2_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS_4_20,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qcm2290_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
+ .tx_tbl = qcm2290_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qcm2290_usb3_tx_tbl),
+ .rx_tbl = qcm2290_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qcm2290_usb3_rx_tbl),
+ .pcs_tbl = qcm2290_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
+ .clk_list = qcm2290_usb3phy_clk_l,
+ .num_clks = ARRAY_SIZE(qcm2290_usb3phy_clk_l),
+ .reset_list = qcm2290_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qcm2290_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static void qcom_qmp_phy_configure_lane(void __iomem *base,
+ const unsigned int *regs,
+ const struct qmp_phy_init_tbl tbl[],
+ int num,
+ u8 lane_mask)
+{
+ int i;
+ const struct qmp_phy_init_tbl *t = tbl;
+
+ if (!t)
+ return;
+
+ for (i = 0; i < num; i++, t++) {
+ if (!(t->lane_mask & lane_mask))
+ continue;
+
+ if (t->in_layout)
+ writel(t->val, base + regs[t->offset]);
+ else
+ writel(t->val, base + t->offset);
+ }
+}
+
+static void qcom_qmp_phy_configure(void __iomem *base,
+ const unsigned int *regs,
+ const struct qmp_phy_init_tbl tbl[],
+ int num)
+{
+ qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff);
+}
+
+static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
+ int serdes_tbl_num = cfg->serdes_tbl_num;
+ int ret;
+
+ qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
+ if (cfg->serdes_tbl_sec)
+ qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
+ cfg->serdes_tbl_num_sec);
+
+ if (cfg->type == PHY_TYPE_DP) {
+ switch (dp_opts->link_rate) {
+ case 1620:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_rbr,
+ cfg->serdes_tbl_rbr_num);
+ break;
+ case 2700:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr,
+ cfg->serdes_tbl_hbr_num);
+ break;
+ case 5400:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr2,
+ cfg->serdes_tbl_hbr2_num);
+ break;
+ case 8100:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr3,
+ cfg->serdes_tbl_hbr3_num);
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ }
+
+
+ if (cfg->has_phy_com_ctrl) {
+ void __iomem *status;
+ unsigned int mask, val;
+
+ qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+ SERDES_START | PCS_START);
+
+ status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
+ mask = cfg->mask_com_pcs_ready;
+
+ ret = readl_poll_timeout(status, val, (val & mask), 10,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev,
+ "phy common block init timed-out\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
+{
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ /* Turn on BIAS current for PHY/PLL */
+ writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
+ QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
+ qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN |
+ DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
+ DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(QSERDES_V3_COM_BIAS_EN |
+ QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
+ QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
+ QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
+ qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0x24, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xbb, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qphy->dp_aux_cfg = 0;
+
+ writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+ PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+ PHY_AUX_REQ_ERR_MASK,
+ qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
+}
+
+static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
+ { 0x00, 0x0c, 0x15, 0x1a },
+ { 0x02, 0x0e, 0x16, 0xff },
+ { 0x02, 0x11, 0xff, 0xff },
+ { 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
+ { 0x02, 0x12, 0x16, 0x1a },
+ { 0x09, 0x19, 0x1f, 0xff },
+ { 0x10, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
+ { 0x00, 0x0c, 0x14, 0x19 },
+ { 0x00, 0x0b, 0x12, 0xff },
+ { 0x00, 0x0b, 0xff, 0xff },
+ { 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
+ { 0x08, 0x0f, 0x16, 0x1f },
+ { 0x11, 0x1e, 0x1f, 0xff },
+ { 0x19, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
+ unsigned int drv_lvl_reg, unsigned int emp_post_reg)
+{
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ unsigned int v_level = 0, p_level = 0;
+ u8 voltage_swing_cfg, pre_emphasis_cfg;
+ int i;
+
+ for (i = 0; i < dp_opts->lanes; i++) {
+ v_level = max(v_level, dp_opts->voltage[i]);
+ p_level = max(p_level, dp_opts->pre[i]);
+ }
+
+ if (dp_opts->link_rate <= 2700) {
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
+ } else {
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
+ }
+
+ /* TODO: Move check to config check */
+ if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
+ return -EINVAL;
+
+ /* Enable MUX to use Cursor values from these registers */
+ voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
+ pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
+
+ writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
+ writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
+
+ return 0;
+}
+
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
+{
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 bias_en, drvr_en;
+
+ if (qcom_qmp_phy_configure_dp_swing(qphy,
+ QSERDES_V3_TX_TX_DRV_LVL,
+ QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
+ return;
+
+ if (dp_opts->lanes == 1) {
+ bias_en = 0x3e;
+ drvr_en = 0x13;
+ } else {
+ bias_en = 0x3f;
+ drvr_en = 0x10;
+ }
+
+ writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+}
+
+static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy)
+{
+ u32 val;
+ bool reverse = false;
+
+ val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
+
+ /*
+ * TODO: Assume orientation is CC1 for now and two lanes, need to
+ * use type-c connector to understand orientation and lanes.
+ *
+ * Otherwise val changes to be like below if this code understood
+ * the orientation of the type-c cable.
+ *
+ * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
+ * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
+ * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
+ * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
+ * if (orientation == ORIENTATION_CC2)
+ * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
+ */
+ val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
+ writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
+
+ return reverse;
+}
+
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 phy_vco_div, status;
+ unsigned long pixel_freq;
+
+ qcom_qmp_phy_configure_dp_mode(qphy);
+
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ phy_vco_div = 0x1;
+ pixel_freq = 1620000000UL / 2;
+ break;
+ case 2700:
+ phy_vco_div = 0x1;
+ pixel_freq = 2700000000UL / 2;
+ break;
+ case 5400:
+ phy_vco_div = 0x2;
+ pixel_freq = 5400000000UL / 4;
+ break;
+ case 8100:
+ phy_vco_div = 0x0;
+ pixel_freq = 8100000000UL / 6;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
+
+ clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
+ clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
+
+ writel(0x04, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ udelay(2000);
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000);
+}
+
+/*
+ * We need to calibrate the aux setting here as many times
+ * as the caller tries
+ */
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
+{
+ static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
+ u8 val;
+
+ qphy->dp_aux_cfg++;
+ qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qphy->dp_aux_cfg];
+
+ writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+
+ return 0;
+}
+
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
+{
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ /* Turn on BIAS current for PHY/PLL */
+ writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qphy->dp_aux_cfg = 0;
+
+ writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+ PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+ PHY_AUX_REQ_ERR_MASK,
+ qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
+}
+
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
+{
+ /* Program default values before writing proper values */
+ writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+
+ writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+
+ qcom_qmp_phy_configure_dp_swing(qphy,
+ QSERDES_V4_TX_TX_DRV_LVL,
+ QSERDES_V4_TX_TX_EMP_POST1_LVL);
+}
+
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 phy_vco_div, status;
+ unsigned long pixel_freq;
+ u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
+ bool reverse;
+
+ writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
+
+ reverse = qcom_qmp_phy_configure_dp_mode(qphy);
+
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+
+ writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ phy_vco_div = 0x1;
+ pixel_freq = 1620000000UL / 2;
+ break;
+ case 2700:
+ phy_vco_div = 0x1;
+ pixel_freq = 2700000000UL / 2;
+ break;
+ case 5400:
+ phy_vco_div = 0x2;
+ pixel_freq = 5400000000UL / 4;
+ break;
+ case 8100:
+ phy_vco_div = 0x0;
+ pixel_freq = 8100000000UL / 6;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
+
+ clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
+ clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
+
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ /*
+ * At least for 7nm DP PHY this has to be done after enabling link
+ * clock.
+ */
+
+ if (dp_opts->lanes == 1) {
+ bias0_en = reverse ? 0x3e : 0x15;
+ bias1_en = reverse ? 0x15 : 0x3e;
+ drvr0_en = reverse ? 0x13 : 0x10;
+ drvr1_en = reverse ? 0x10 : 0x13;
+ } else if (dp_opts->lanes == 2) {
+ bias0_en = reverse ? 0x3f : 0x15;
+ bias1_en = reverse ? 0x15 : 0x3f;
+ drvr0_en = 0x10;
+ drvr1_en = 0x10;
+ } else {
+ bias0_en = 0x3f;
+ bias1_en = 0x3f;
+ drvr0_en = 0x10;
+ drvr1_en = 0x10;
+ }
+
+ writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+
+ writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ udelay(2000);
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
+
+ writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+
+ writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+
+ return 0;
+}
+
+/*
+ * We need to calibrate the aux setting here as many times
+ * as the caller tries
+ */
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
+{
+ static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
+ u8 val;
+
+ qphy->dp_aux_cfg++;
+ qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qphy->dp_aux_cfg];
+
+ writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+
+ return 0;
+}
+
+static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ const struct phy_configure_opts_dp *dp_opts = &opts->dp;
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
+ if (qphy->dp_opts.set_voltages) {
+ cfg->configure_dp_tx(qphy);
+ qphy->dp_opts.set_voltages = 0;
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ if (cfg->calibrate_dp_phy)
+ return cfg->calibrate_dp_phy(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *dp_com = qmp->dp_com;
+ int ret, i;
+
+ mutex_lock(&qmp->phy_mutex);
+ if (qmp->init_count++) {
+ mutex_unlock(&qmp->phy_mutex);
+ return 0;
+ }
+
+ /* turn on regulator supplies */
+ ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
+ if (ret) {
+ dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
+ goto err_unlock;
+ }
+
+ for (i = 0; i < cfg->num_resets; i++) {
+ ret = reset_control_assert(qmp->resets[i]);
+ if (ret) {
+ dev_err(qmp->dev, "%s reset assert failed\n",
+ cfg->reset_list[i]);
+ goto err_disable_regulators;
+ }
+ }
+
+ for (i = cfg->num_resets - 1; i >= 0; i--) {
+ ret = reset_control_deassert(qmp->resets[i]);
+ if (ret) {
+ dev_err(qmp->dev, "%s reset deassert failed\n",
+ qphy->cfg->reset_list[i]);
+ goto err_assert_reset;
+ }
+ }
+
+ ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ if (ret)
+ goto err_assert_reset;
+
+ if (cfg->has_phy_dp_com_ctrl) {
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
+ SW_PWRDN);
+ /* override hardware control for reset of qmp phy */
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+ SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+ SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+ /* Default type-c orientation, i.e CC1 */
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
+
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
+ USB3_MODE | DP_MODE);
+
+ /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+ SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+ SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
+ }
+
+ if (cfg->has_phy_com_ctrl) {
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
+ SW_PWRDN);
+ } else {
+ if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
+ qphy_setbits(pcs,
+ cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);
+ else
+ qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL,
+ cfg->pwrdn_ctrl);
+ }
+
+ mutex_unlock(&qmp->phy_mutex);
+
+ return 0;
+
+err_assert_reset:
+ while (++i < cfg->num_resets)
+ reset_control_assert(qmp->resets[i]);
+err_disable_regulators:
+ regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+err_unlock:
+ mutex_unlock(&qmp->phy_mutex);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ int i = cfg->num_resets;
+
+ mutex_lock(&qmp->phy_mutex);
+ if (--qmp->init_count) {
+ mutex_unlock(&qmp->phy_mutex);
+ return 0;
+ }
+
+ reset_control_assert(qmp->ufs_reset);
+ if (cfg->has_phy_com_ctrl) {
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+ SERDES_START | PCS_START);
+ qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET],
+ SW_RESET);
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
+ SW_PWRDN);
+ }
+
+ while (--i >= 0)
+ reset_control_assert(qmp->resets[i]);
+
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+ regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+
+ mutex_unlock(&qmp->phy_mutex);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_init(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ int ret;
+ dev_vdbg(qmp->dev, "Initializing QMP phy\n");
+
+ if (cfg->no_pcs_sw_reset) {
+ /*
+ * Get UFS reset, which is delayed until now to avoid a
+ * circular dependency where UFS needs its PHY, but the PHY
+ * needs this UFS reset.
+ */
+ if (!qmp->ufs_reset) {
+ qmp->ufs_reset =
+ devm_reset_control_get_exclusive(qmp->dev,
+ "ufsphy");
+
+ if (IS_ERR(qmp->ufs_reset)) {
+ ret = PTR_ERR(qmp->ufs_reset);
+ dev_err(qmp->dev,
+ "failed to get UFS reset: %d\n",
+ ret);
+
+ qmp->ufs_reset = NULL;
+ return ret;
+ }
+ }
+
+ ret = reset_control_assert(qmp->ufs_reset);
+ if (ret)
+ return ret;
+ }
+
+ ret = qcom_qmp_phy_com_init(qphy);
+ if (ret)
+ return ret;
+
+ if (cfg->type == PHY_TYPE_DP)
+ cfg->dp_aux_init(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_power_on(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *tx = qphy->tx;
+ void __iomem *rx = qphy->rx;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+ void __iomem *status;
+ unsigned int mask, val, ready;
+ int ret;
+
+ qcom_qmp_phy_serdes_init(qphy);
+
+ if (cfg->has_lane_rst) {
+ ret = reset_control_deassert(qphy->lane_rst);
+ if (ret) {
+ dev_err(qmp->dev, "lane%d reset deassert failed\n",
+ qphy->index);
+ return ret;
+ }
+ }
+
+ ret = clk_prepare_enable(qphy->pipe_clk);
+ if (ret) {
+ dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
+ goto err_reset_lane;
+ }
+
+ /* Tx, Rx, and PCS configurations */
+ qcom_qmp_phy_configure_lane(tx, cfg->regs,
+ cfg->tx_tbl, cfg->tx_tbl_num, 1);
+ if (cfg->tx_tbl_sec)
+ qcom_qmp_phy_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
+ cfg->tx_tbl_num_sec, 1);
+
+ /* Configuration for other LANE for USB-DP combo PHY */
+ if (cfg->is_dual_lane_phy) {
+ qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
+ cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ if (cfg->tx_tbl_sec)
+ qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
+ cfg->tx_tbl_sec,
+ cfg->tx_tbl_num_sec, 2);
+ }
+
+ /* Configure special DP tx tunings */
+ if (cfg->type == PHY_TYPE_DP)
+ cfg->configure_dp_tx(qphy);
+
+ qcom_qmp_phy_configure_lane(rx, cfg->regs,
+ cfg->rx_tbl, cfg->rx_tbl_num, 1);
+ if (cfg->rx_tbl_sec)
+ qcom_qmp_phy_configure_lane(rx, cfg->regs,
+ cfg->rx_tbl_sec, cfg->rx_tbl_num_sec, 1);
+
+ if (cfg->is_dual_lane_phy) {
+ qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
+ cfg->rx_tbl, cfg->rx_tbl_num, 2);
+ if (cfg->rx_tbl_sec)
+ qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
+ cfg->rx_tbl_sec,
+ cfg->rx_tbl_num_sec, 2);
+ }
+
+ /* Configure link rate, swing, etc. */
+ if (cfg->type == PHY_TYPE_DP) {
+ cfg->configure_dp_phy(qphy);
+ } else {
+ qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+ if (cfg->pcs_tbl_sec)
+ qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
+ cfg->pcs_tbl_num_sec);
+ }
+
+ ret = reset_control_deassert(qmp->ufs_reset);
+ if (ret)
+ goto err_disable_pipe_clk;
+
+ qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
+ cfg->pcs_misc_tbl_num);
+ if (cfg->pcs_misc_tbl_sec)
+ qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
+ cfg->pcs_misc_tbl_num_sec);
+
+ /*
+ * Pull out PHY from POWER DOWN state.
+ * This is active low enable signal to power-down PHY.
+ */
+ if(cfg->type == PHY_TYPE_PCIE)
+ qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
+
+ if (cfg->has_pwrdn_delay)
+ usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
+
+ if (cfg->type != PHY_TYPE_DP) {
+ /* Pull PHY out of reset state */
+ if (!cfg->no_pcs_sw_reset)
+ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+ /* start SerDes and Phy-Coding-Sublayer */
+ qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+ if (cfg->type == PHY_TYPE_UFS) {
+ status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
+ mask = PCS_READY;
+ ready = PCS_READY;
+ } else {
+ status = pcs + cfg->regs[QPHY_PCS_STATUS];
+ mask = cfg->phy_status;
+ ready = 0;
+ }
+
+ ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev, "phy initialization timed-out\n");
+ goto err_disable_pipe_clk;
+ }
+ }
+ return 0;
+
+err_disable_pipe_clk:
+ clk_disable_unprepare(qphy->pipe_clk);
+err_reset_lane:
+ if (cfg->has_lane_rst)
+ reset_control_assert(qphy->lane_rst);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_power_off(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ clk_disable_unprepare(qphy->pipe_clk);
+
+ if (cfg->type == PHY_TYPE_DP) {
+ /* Assert DP PHY power down */
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ } else {
+ /* PHY reset */
+ if (!cfg->no_pcs_sw_reset)
+ qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+
+ /* stop SerDes and Phy-Coding-Sublayer */
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+ /* Put PHY into POWER DOWN state: active low */
+ if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);
+ } else {
+ qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL,
+ cfg->pwrdn_ctrl);
+ }
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_phy_exit(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ if (cfg->has_lane_rst)
+ reset_control_assert(qphy->lane_rst);
+
+ qcom_qmp_phy_com_exit(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_enable(struct phy *phy)
+{
+ int ret;
+
+ ret = qcom_qmp_phy_init(phy);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_power_on(phy);
+ if (ret)
+ qcom_qmp_phy_exit(phy);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_disable(struct phy *phy)
+{
+ int ret;
+
+ ret = qcom_qmp_phy_power_off(phy);
+ if (ret)
+ return ret;
+ return qcom_qmp_phy_exit(phy);
+}
+
+static int qcom_qmp_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+
+ qphy->mode = mode;
+
+ return 0;
+}
+
+static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+ u32 intr_mask;
+
+ if (qphy->mode == PHY_MODE_USB_HOST_SS ||
+ qphy->mode == PHY_MODE_USB_DEVICE_SS)
+ intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
+ else
+ intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
+
+ /* Clear any pending interrupts status */
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ /* Writing 1 followed by 0 clears the interrupt */
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
+
+ /* Enable required PHY autonomous mode interrupts */
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
+
+ /* Enable i/o clamp_n for autonomous mode */
+ if (pcs_misc)
+ qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
+}
+
+static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+
+ /* Disable i/o clamp_n on resume for normal mode */
+ if (pcs_misc)
+ qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
+
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
+
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ /* Writing 1 followed by 0 clears the interrupt */
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+}
+
+static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_phy *qphy = qmp->phys[0];
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
+
+ /* Supported only for USB3 PHY and luckily USB3 is the first phy */
+ if (cfg->type != PHY_TYPE_USB3)
+ return 0;
+
+ if (!qmp->init_count) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ qcom_qmp_phy_enable_autonomous_mode(qphy);
+
+ clk_disable_unprepare(qphy->pipe_clk);
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+ return 0;
+}
+
+static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_phy *qphy = qmp->phys[0];
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ int ret = 0;
+
+ dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
+
+ /* Supported only for USB3 PHY and luckily USB3 is the first phy */
+ if (cfg->type != PHY_TYPE_USB3)
+ return 0;
+
+ if (!qmp->init_count) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(qphy->pipe_clk);
+ if (ret) {
+ dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+ return ret;
+ }
+
+ qcom_qmp_phy_disable_autonomous_mode(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int num = cfg->num_vregs;
+ int i;
+
+ qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
+ if (!qmp->vregs)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++)
+ qmp->vregs[i].supply = cfg->vreg_list[i];
+
+ return devm_regulator_bulk_get(dev, num, qmp->vregs);
+}
+
+static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int i;
+
+ qmp->resets = devm_kcalloc(dev, cfg->num_resets,
+ sizeof(*qmp->resets), GFP_KERNEL);
+ if (!qmp->resets)
+ return -ENOMEM;
+
+ for (i = 0; i < cfg->num_resets; i++) {
+ struct reset_control *rst;
+ const char *name = cfg->reset_list[i];
+
+ rst = devm_reset_control_get_exclusive(dev, name);
+ if (IS_ERR(rst)) {
+ dev_err(dev, "failed to get %s reset\n", name);
+ return PTR_ERR(rst);
+ }
+ qmp->resets[i] = rst;
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int num = cfg->num_clks;
+ int i;
+
+ qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
+ if (!qmp->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++)
+ qmp->clks[i].id = cfg->clk_list[i];
+
+ return devm_clk_bulk_get(dev, num, qmp->clks);
+}
+
+static void phy_clk_release_provider(void *res)
+{
+ of_clk_del_provider(res);
+}
+
+/*
+ * Register a fixed rate pipe clock.
+ *
+ * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
+ * controls it. The <s>_pipe_clk coming out of the GCC is requested
+ * by the PHY driver for its operations.
+ * We register the <s>_pipe_clksrc here. The gcc driver takes care
+ * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
+ * Below picture shows this relationship.
+ *
+ * +---------------+
+ * | PHY block |<<---------------------------------------+
+ * | | |
+ * | +-------+ | +-----+ |
+ * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
+ * clk | +-------+ | +-----+
+ * +---------------+
+ */
+static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
+{
+ struct clk_fixed_rate *fixed;
+ struct clk_init_data init = { };
+ int ret;
+
+ ret = of_property_read_string(np, "clock-output-names", &init.name);
+ if (ret) {
+ dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
+ return ret;
+ }
+
+ fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
+ if (!fixed)
+ return -ENOMEM;
+
+ init.ops = &clk_fixed_rate_ops;
+
+ /* controllers using QMP phys use 125MHz pipe clock interface */
+ fixed->fixed_rate = 125000000;
+ fixed->hw.init = &init;
+
+ ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
+ if (ret)
+ return ret;
+
+ /*
+ * Roll a devm action because the clock provider is the child node, but
+ * the child node is not actually a device.
+ */
+ return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
+}
+
+/*
+ * Display Port PLL driver block diagram for branch clocks
+ *
+ * +------------------------------+
+ * | DP_VCO_CLK |
+ * | |
+ * | +-------------------+ |
+ * | | (DP PLL/VCO) | |
+ * | +---------+---------+ |
+ * | v |
+ * | +----------+-----------+ |
+ * | | hsclk_divsel_clk_src | |
+ * | +----------+-----------+ |
+ * +------------------------------+
+ * |
+ * +---------<---------v------------>----------+
+ * | |
+ * +--------v----------------+ |
+ * | dp_phy_pll_link_clk | |
+ * | link_clk | |
+ * +--------+----------------+ |
+ * | |
+ * | |
+ * v v
+ * Input to DISPCC block |
+ * for link clk, crypto clk |
+ * and interface clock |
+ * |
+ * |
+ * +--------<------------+-----------------+---<---+
+ * | | |
+ * +----v---------+ +--------v-----+ +--------v------+
+ * | vco_divided | | vco_divided | | vco_divided |
+ * | _clk_src | | _clk_src | | _clk_src |
+ * | | | | | |
+ * |divsel_six | | divsel_two | | divsel_four |
+ * +-------+------+ +-----+--------+ +--------+------+
+ * | | |
+ * v---->----------v-------------<------v
+ * |
+ * +----------+-----------------+
+ * | dp_phy_pll_vco_div_clk |
+ * +---------+------------------+
+ * |
+ * v
+ * Input to DISPCC block
+ * for DP pixel clock
+ *
+ */
+static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 1620000000UL / 2:
+ case 2700000000UL / 2:
+ /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qmp_phy_dp_clks *dp_clks;
+ const struct qmp_phy *qphy;
+ const struct phy_configure_opts_dp *dp_opts;
+
+ dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
+ qphy = dp_clks->qphy;
+ dp_opts = &qphy->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ return 1620000000UL / 2;
+ case 2700:
+ return 2700000000UL / 2;
+ case 5400:
+ return 5400000000UL / 4;
+ case 8100:
+ return 8100000000UL / 6;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = {
+ .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate,
+ .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate,
+};
+
+static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 162000000:
+ case 270000000:
+ case 540000000:
+ case 810000000:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qmp_phy_dp_clks *dp_clks;
+ const struct qmp_phy *qphy;
+ const struct phy_configure_opts_dp *dp_opts;
+
+ dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
+ qphy = dp_clks->qphy;
+ dp_opts = &qphy->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ case 2700:
+ case 5400:
+ case 8100:
+ return dp_opts->link_rate * 100000;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_qmp_dp_link_clk_ops = {
+ .determine_rate = qcom_qmp_dp_link_clk_determine_rate,
+ .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate,
+};
+
+static struct clk_hw *
+qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct qmp_phy_dp_clks *dp_clks = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx >= 2) {
+ pr_err("%s: invalid index %u\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (idx == 0)
+ return &dp_clks->dp_link_hw;
+
+ return &dp_clks->dp_pixel_hw;
+}
+
+static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
+ struct device_node *np)
+{
+ struct clk_init_data init = { };
+ struct qmp_phy_dp_clks *dp_clks;
+ char name[64];
+ int ret;
+
+ dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
+ if (!dp_clks)
+ return -ENOMEM;
+
+ dp_clks->qphy = qphy;
+ qphy->dp_clks = dp_clks;
+
+ snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
+ init.ops = &qcom_qmp_dp_link_clk_ops;
+ init.name = name;
+ dp_clks->dp_link_hw.init = &init;
+ ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
+ if (ret)
+ return ret;
+
+ snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev));
+ init.ops = &qcom_qmp_dp_pixel_clk_ops;
+ init.name = name;
+ dp_clks->dp_pixel_hw.init = &init;
+ ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks);
+ if (ret)
+ return ret;
+
+ /*
+ * Roll a devm action because the clock provider is the child node, but
+ * the child node is not actually a device.
+ */
+ return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
+}
+
+static const struct phy_ops qcom_qmp_phy_gen_ops = {
+ .init = qcom_qmp_phy_enable,
+ .exit = qcom_qmp_phy_disable,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops qcom_qmp_phy_dp_ops = {
+ .init = qcom_qmp_phy_init,
+ .configure = qcom_qmp_dp_phy_configure,
+ .power_on = qcom_qmp_phy_power_on,
+ .calibrate = qcom_qmp_dp_phy_calibrate,
+ .power_off = qcom_qmp_phy_power_off,
+ .exit = qcom_qmp_phy_exit,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
+ .power_on = qcom_qmp_phy_enable,
+ .power_off = qcom_qmp_phy_disable,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static void qcom_qmp_reset_control_put(void *data)
+{
+ reset_control_put(data);
+}
+
+static
+int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
+ void __iomem *serdes, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct phy *generic_phy;
+ struct qmp_phy *qphy;
+ const struct phy_ops *ops;
+ char prop_name[MAX_PROP_NAME];
+ int ret;
+
+ qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
+ if (!qphy)
+ return -ENOMEM;
+
+ qphy->cfg = cfg;
+ qphy->serdes = serdes;
+ /*
+ * Get memory resources for each phy lane:
+ * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
+ * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
+ * For single lane PHYs: pcs_misc (optional) -> 3.
+ */
+ qphy->tx = of_iomap(np, 0);
+ if (!qphy->tx)
+ return -ENOMEM;
+
+ qphy->rx = of_iomap(np, 1);
+ if (!qphy->rx)
+ return -ENOMEM;
+
+ qphy->pcs = of_iomap(np, 2);
+ if (!qphy->pcs)
+ return -ENOMEM;
+
+ /*
+ * If this is a dual-lane PHY, then there should be registers for the
+ * second lane. Some old device trees did not specify this, so fall
+ * back to old legacy behavior of assuming they can be reached at an
+ * offset from the first lane.
+ */
+ if (cfg->is_dual_lane_phy) {
+ qphy->tx2 = of_iomap(np, 3);
+ qphy->rx2 = of_iomap(np, 4);
+ if (!qphy->tx2 || !qphy->rx2) {
+ dev_warn(dev,
+ "Underspecified device tree, falling back to legacy register regions\n");
+
+ /* In the old version, pcs_misc is at index 3. */
+ qphy->pcs_misc = qphy->tx2;
+ qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
+ qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
+
+ } else {
+ qphy->pcs_misc = of_iomap(np, 5);
+ }
+
+ } else {
+ qphy->pcs_misc = of_iomap(np, 3);
+ }
+
+ if (!qphy->pcs_misc)
+ dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
+
+ /*
+ * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
+ * based phys, so they essentially have pipe clock. So,
+ * we return error in case phy is USB3 or PIPE type.
+ * Otherwise, we initialize pipe clock to NULL for
+ * all phys that don't need this.
+ */
+ snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
+ qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
+ if (IS_ERR(qphy->pipe_clk)) {
+ if (cfg->type == PHY_TYPE_PCIE ||
+ cfg->type == PHY_TYPE_USB3) {
+ ret = PTR_ERR(qphy->pipe_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev,
+ "failed to get lane%d pipe_clk, %d\n",
+ id, ret);
+ return ret;
+ }
+ qphy->pipe_clk = NULL;
+ }
+
+ /* Get lane reset, if any */
+ if (cfg->has_lane_rst) {
+ snprintf(prop_name, sizeof(prop_name), "lane%d", id);
+ qphy->lane_rst = of_reset_control_get_exclusive(np, prop_name);
+ if (IS_ERR(qphy->lane_rst)) {
+ dev_err(dev, "failed to get lane%d reset\n", id);
+ return PTR_ERR(qphy->lane_rst);
+ }
+ ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put,
+ qphy->lane_rst);
+ if (ret)
+ return ret;
+ }
+
+ if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE)
+ ops = &qcom_qmp_pcie_ufs_ops;
+ else if (cfg->type == PHY_TYPE_DP)
+ ops = &qcom_qmp_phy_dp_ops;
+ else
+ ops = &qcom_qmp_phy_gen_ops;
+
+ generic_phy = devm_phy_create(dev, np, ops);
+ if (IS_ERR(generic_phy)) {
+ ret = PTR_ERR(generic_phy);
+ dev_err(dev, "failed to create qphy %d\n", ret);
+ return ret;
+ }
+
+ qphy->phy = generic_phy;
+ qphy->index = id;
+ qphy->qmp = qmp;
+ qmp->phys[id] = qphy;
+ phy_set_drvdata(generic_phy, qphy);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,ipq8074-qmp-usb3-phy",
+ .data = &ipq8074_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-pcie-phy",
+ .data = &msm8996_pciephy_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-ufs-phy",
+ .data = &msm8996_ufs_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-usb3-phy",
+ .data = &msm8996_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-pcie-phy",
+ .data = &msm8998_pciephy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,ipq8074-qmp-pcie-phy",
+ .data = &ipq8074_pciephy_cfg,
+ }, {
+ .compatible = "qcom,ipq6018-qmp-pcie-phy",
+ .data = &ipq6018_pciephy_cfg,
+ }, {
+ .compatible = "qcom,ipq6018-qmp-usb3-phy",
+ .data = &ipq8074_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc7180-qmp-usb3-phy",
+ .data = &sc7180_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sc8180x-qmp-pcie-phy",
+ .data = &sc8180x_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sc8280xp-qmp-ufs-phy",
+ .data = &sm8350_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-usb3-phy",
+ .data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sdm845-qhp-pcie-phy",
+ .data = &sdm845_qhp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-pcie-phy",
+ .data = &sdm845_qmp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-usb3-phy",
+ .data = &qmp_v3_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-usb3-uni-phy",
+ .data = &qmp_v3_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-usb3-phy",
+ .data = &msm8998_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm6115-qmp-ufs-phy",
+ .data = &sm6115_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm6350-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-phy",
+ .data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-uni-phy",
+ .data = &sm8150_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-phy",
+ .data = &sm8250_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-uni-phy",
+ .data = &sm8250_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy",
+ .data = &sm8250_qmp_gen3x1_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy",
+ .data = &sm8250_qmp_gen3x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-ufs-phy",
+ .data = &sm8350_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-modem-pcie-phy",
+ .data = &sm8250_qmp_gen3x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdx55-qmp-pcie-phy",
+ .data = &sdx55_qmp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdx55-qmp-usb3-uni-phy",
+ .data = &sdx55_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sdx65-qmp-usb3-uni-phy",
+ .data = &sdx65_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-usb3-phy",
+ .data = &sm8350_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-usb3-uni-phy",
+ .data = &sm8350_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
+ .data = &sm8450_qmp_gen3x1_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
+ .data = &sm8450_qmp_gen4x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-ufs-phy",
+ .data = &sm8450_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-usb3-phy",
+ .data = &sm8350_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,qcm2290-qmp-usb3-phy",
+ .data = &qcm2290_usb3phy_cfg,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
+
+static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ .data = &sc7180_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ .data = &sm8250_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ .data = &sc8180x_usb3dpphy_cfg,
+ },
+ { }
+};
+
+static const struct dev_pm_ops qcom_qmp_phy_pm_ops = {
+ SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend,
+ qcom_qmp_phy_runtime_resume, NULL)
+};
+
+static int qcom_qmp_phy_probe(struct platform_device *pdev)
+{
+ struct qcom_qmp *qmp;
+ struct device *dev = &pdev->dev;
+ struct device_node *child;
+ struct phy_provider *phy_provider;
+ void __iomem *serdes;
+ void __iomem *usb_serdes;
+ void __iomem *dp_serdes = NULL;
+ const struct qmp_phy_combo_cfg *combo_cfg = NULL;
+ const struct qmp_phy_cfg *cfg = NULL;
+ const struct qmp_phy_cfg *usb_cfg = NULL;
+ const struct qmp_phy_cfg *dp_cfg = NULL;
+ int num, id, expected_phys;
+ int ret;
+
+ qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
+ if (!qmp)
+ return -ENOMEM;
+
+ qmp->dev = dev;
+ dev_set_drvdata(dev, qmp);
+
+ /* Get the specific init parameters of QMP phy */
+ cfg = of_device_get_match_data(dev);
+ if (!cfg) {
+ const struct of_device_id *match;
+
+ match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev);
+ if (!match)
+ return -EINVAL;
+
+ combo_cfg = match->data;
+ if (!combo_cfg)
+ return -EINVAL;
+
+ usb_cfg = combo_cfg->usb_cfg;
+ cfg = usb_cfg; /* Setup clks and regulators */
+ }
+
+ /* per PHY serdes; usually located at base address */
+ usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(serdes))
+ return PTR_ERR(serdes);
+
+ /* per PHY dp_com; if PHY has dp_com control block */
+ if (combo_cfg || cfg->has_phy_dp_com_ctrl) {
+ qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(qmp->dp_com))
+ return PTR_ERR(qmp->dp_com);
+ }
+
+ if (combo_cfg) {
+ /* Only two serdes for combo PHY */
+ dp_serdes = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(dp_serdes))
+ return PTR_ERR(dp_serdes);
+
+ dp_cfg = combo_cfg->dp_cfg;
+ expected_phys = 2;
+ } else {
+ expected_phys = cfg->nlanes;
+ }
+
+ mutex_init(&qmp->phy_mutex);
+
+ ret = qcom_qmp_phy_clk_init(dev, cfg);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_reset_init(dev, cfg);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_vreg_init(dev, cfg);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get regulator supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ num = of_get_available_child_count(dev->of_node);
+ /* do we have a rogue child node ? */
+ if (num > expected_phys)
+ return -EINVAL;
+
+ qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
+ if (!qmp->phys)
+ return -ENOMEM;
+
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ /*
+ * Prevent runtime pm from being ON by default. Users can enable
+ * it using power/control in sysfs.
+ */
+ pm_runtime_forbid(dev);
+
+ id = 0;
+ for_each_available_child_of_node(dev->of_node, child) {
+ if (of_node_name_eq(child, "dp-phy")) {
+ cfg = dp_cfg;
+ serdes = dp_serdes;
+ } else if (of_node_name_eq(child, "usb3-phy")) {
+ cfg = usb_cfg;
+ serdes = usb_serdes;
+ }
+
+ /* Create per-lane phy */
+ ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg);
+ if (ret) {
+ dev_err(dev, "failed to create lane%d phy, %d\n",
+ id, ret);
+ goto err_node_put;
+ }
+
+ /*
+ * Register the pipe clock provided by phy.
+ * See function description to see details of this pipe clock.
+ */
+ if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) {
+ ret = phy_pipe_clk_register(qmp, child);
+ if (ret) {
+ dev_err(qmp->dev,
+ "failed to register pipe clock source\n");
+ goto err_node_put;
+ }
+ } else if (cfg->type == PHY_TYPE_DP) {
+ ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
+ if (ret) {
+ dev_err(qmp->dev,
+ "failed to register DP clock source\n");
+ goto err_node_put;
+ }
+ }
+ id++;
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (!IS_ERR(phy_provider))
+ dev_info(dev, "Registered Qcom-QMP phy\n");
+ else
+ pm_runtime_disable(dev);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+
+err_node_put:
+ pm_runtime_disable(dev);
+ of_node_put(child);
+ return ret;
+}
+
+static struct platform_driver qcom_qmp_phy_driver = {
+ .probe = qcom_qmp_phy_probe,
+ .driver = {
+ .name = "qcom-qmp-phy",
+ .pm = &qcom_qmp_phy_pm_ops,
+ .of_match_table = qcom_qmp_phy_of_match_table,
+ },
+};
+
+module_platform_driver(qcom_qmp_phy_driver);
+
+MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm QMP PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
new file mode 100644
index 000000000000..c7309e981bfb
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -0,0 +1,6350 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#include "phy-qcom-qmp.h"
+
+/* QPHY_SW_RESET bit */
+#define SW_RESET BIT(0)
+/* QPHY_POWER_DOWN_CONTROL */
+#define SW_PWRDN BIT(0)
+#define REFCLK_DRV_DSBL BIT(1)
+/* QPHY_START_CONTROL bits */
+#define SERDES_START BIT(0)
+#define PCS_START BIT(1)
+#define PLL_READY_GATE_EN BIT(3)
+/* QPHY_PCS_STATUS bit */
+#define PHYSTATUS BIT(6)
+#define PHYSTATUS_4_20 BIT(7)
+/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
+#define PCS_READY BIT(0)
+
+/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
+/* DP PHY soft reset */
+#define SW_DPPHY_RESET BIT(0)
+/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
+#define SW_DPPHY_RESET_MUX BIT(1)
+/* USB3 PHY soft reset */
+#define SW_USB3PHY_RESET BIT(2)
+/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
+#define SW_USB3PHY_RESET_MUX BIT(3)
+
+/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
+#define USB3_MODE BIT(0) /* enables USB3 mode */
+#define DP_MODE BIT(1) /* enables DP mode */
+
+/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
+#define ARCVR_DTCT_EN BIT(0)
+#define ALFPS_DTCT_EN BIT(1)
+#define ARCVR_DTCT_EVENT_SEL BIT(4)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
+#define IRQ_CLEAR BIT(0)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
+#define RCVR_DETECT BIT(0)
+
+/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
+#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
+
+#define PHY_INIT_COMPLETE_TIMEOUT 10000
+#define POWER_DOWN_DELAY_US_MIN 10
+#define POWER_DOWN_DELAY_US_MAX 11
+
+#define MAX_PROP_NAME 32
+
+/* Define the assumed distance between lanes for underspecified device trees. */
+#define QMP_PHY_LEGACY_LANE_STRIDE 0x400
+
+struct qmp_phy_init_tbl {
+ unsigned int offset;
+ unsigned int val;
+ /*
+ * register part of layout ?
+ * if yes, then offset gives index in the reg-layout
+ */
+ bool in_layout;
+ /*
+ * mask of lanes for which this register is written
+ * for cases when second lane needs different values
+ */
+ u8 lane_mask;
+};
+
+#define QMP_PHY_INIT_CFG(o, v) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .lane_mask = 0xff, \
+ }
+
+#define QMP_PHY_INIT_CFG_L(o, v) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .in_layout = true, \
+ .lane_mask = 0xff, \
+ }
+
+#define QMP_PHY_INIT_CFG_LANE(o, v, l) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .lane_mask = l, \
+ }
+
+/* set of registers with offsets different per-PHY */
+enum qphy_reg_layout {
+ /* Common block control registers */
+ QPHY_COM_SW_RESET,
+ QPHY_COM_POWER_DOWN_CONTROL,
+ QPHY_COM_START_CONTROL,
+ QPHY_COM_PCS_READY_STATUS,
+ /* PCS registers */
+ QPHY_PLL_LOCK_CHK_DLY_TIME,
+ QPHY_FLL_CNTRL1,
+ QPHY_FLL_CNTRL2,
+ QPHY_FLL_CNT_VAL_L,
+ QPHY_FLL_CNT_VAL_H_TOL,
+ QPHY_FLL_MAN_CODE,
+ QPHY_SW_RESET,
+ QPHY_START_CTRL,
+ QPHY_PCS_READY_STATUS,
+ QPHY_PCS_STATUS,
+ QPHY_PCS_AUTONOMOUS_MODE_CTRL,
+ QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
+ QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
+ QPHY_PCS_POWER_DOWN_CONTROL,
+ /* PCS_MISC registers */
+ QPHY_PCS_MISC_TYPEC_CTRL,
+ /* Keep last to ensure regs_layout arrays are properly initialized */
+ QPHY_LAYOUT_SIZE
+};
+
+static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
+static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+};
+
+static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_COM_SW_RESET] = 0x400,
+ [QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
+ [QPHY_COM_START_CONTROL] = 0x408,
+ [QPHY_COM_PCS_READY_STATUS] = 0x448,
+ [QPHY_PLL_LOCK_CHK_DLY_TIME] = 0xa8,
+ [QPHY_FLL_CNTRL1] = 0xc4,
+ [QPHY_FLL_CNTRL2] = 0xc8,
+ [QPHY_FLL_CNT_VAL_L] = 0xcc,
+ [QPHY_FLL_CNT_VAL_H_TOL] = 0xd0,
+ [QPHY_FLL_MAN_CODE] = 0xd4,
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+};
+
+static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_FLL_CNTRL1] = 0xc0,
+ [QPHY_FLL_CNTRL2] = 0xc4,
+ [QPHY_FLL_CNT_VAL_L] = 0xc8,
+ [QPHY_FLL_CNT_VAL_H_TOL] = 0xcc,
+ [QPHY_FLL_MAN_CODE] = 0xd0,
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x17c,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
+};
+
+static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
+};
+
+static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+};
+
+static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x2ac,
+};
+
+static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
+};
+
+static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
+};
+
+static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x1008,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
+};
+
+static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
+ [QPHY_PCS_STATUS] = 0x174,
+ [QPHY_PCS_MISC_TYPEC_CTRL] = 0x00,
+};
+
+static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x160,
+};
+
+static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
+static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+};
+
+static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = QPHY_V4_PCS_UFS_PHY_START,
+ [QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_UFS_READY_STATUS,
+ [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET,
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ /* PLL and Loop filter settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ /* SSC settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c),
+ QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+
+ QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05),
+
+ QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05),
+ QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04),
+ /* PLL and Loop filter settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ /* SSC settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x29),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x53),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x61),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_EQ_CONFIG5, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+ QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
+ QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_POST, 0x58),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
+ QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
+ QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
+ QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
+ QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
+ QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x007),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_01, 0x59),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xbb),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG4, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2, 0x52),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4, 0x1a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5, 0x06),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SYSCLK_EN_SEL, 0x27),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BIAS_EN_CKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_ENABLE1, 0xb0),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE0, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_RESTRIM_CTRL2, 0x05),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VCO_TUNE_MAP, 0x10),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_SELECT, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_HSCLK_SEL1, 0x30),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORE_CLK_EN, 0x73),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SVS_MODE_CLK_SEL, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV1, 0x22),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV2, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BGV_TRIM, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BG_CTRL, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL0, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_TAP_EN, 0x0d),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TX_BAND_MODE, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_LANE_MODE, 0x1a),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PARALLEL_RATE, 0x2f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE0, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE1, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE2, 0x1b),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE2, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE0, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE1, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE2, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_THRESH_DFE, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CGA_THRESH_DFE, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXENGINE_EN0, 0x12),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_TRAIN_TIME, 0x25),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_DFE_OVRLP_TIME, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_REFRESH_TIME, 0x05),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_ENABLE_TIME, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_GAIN, 0x26),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_GAIN, 0x12),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_OFFSET_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PRE_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_INTVAL, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EDAC_INITVAL, 0x28),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB0, 0x7f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB1, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RCVRDONE_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_CTRL, 0x70),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE0, 0x8b),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE2, 0x0a),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE2, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_BAND, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE0, 0x5c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE1, 0x3e),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE2, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_ENABLES, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_CNTRL, 0xa0),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_DEGLITCH_CNTRL, 0x08),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DCC_GAIN, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_EN_SIGNAL, 0xc3),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PSM_RX_EN_CAL, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_MISC_CNTRL0, 0xbc),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TS0_TIMER, 0x7f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DLL_HIGHDATARATE, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RESETCODE_OFFSET, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_INITVAL, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RSM_START, 0x01),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_rx_tbl[] = {
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_PCS_TX_RX_CONFIG, 0x50),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M3P5DB, 0x19),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M3P5DB, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M6DB, 0x17),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M6DB, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG5, 0x9f),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x50),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb5),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4c),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x64),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x0F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x1E),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0D),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5B),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_RX_PWM_GEAR_BAND, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_DRV_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),
+ QMP_PHY_INIT_CFG(QPHY_RX_SYM_RESYNC_CTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_POST_EMP_LVL, 0x12),
+ QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_POST_EMP_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL2, 0x6e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SYM_RESYNC_CTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL1, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_MIN_HIBERN8_TIME, 0x9a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
+
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x94),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x5),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x6e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x39),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x39),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x01),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x35),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x12),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P6_P7_PRE, 0x33),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_EQ_CONFIG2, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x05),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG2, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x08),
+};
+
+static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x26),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x048),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x46),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_CFG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x50),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MISC1, 0x88),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTERNAL_DIG_CORECLK_DIV, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MODE, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_DC_LEVEL_CTRL, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x56),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x22),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_3, 0x13),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_VMODE_CTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_PI_QEC_CTRL, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_FO_GAIN_RATE2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_3, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_VGA_CAL_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x27),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B0, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B1, 0xf9),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B3, 0xce),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B4, 0x62),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B0, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B3, 0xcf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B4, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_PHPRE_CTRL, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_MARG_COARSE_CTRL2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG2, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG4, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG5, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_EQ_CONFIG1, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G3_RXEQEVAL_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_RXEQEVAL_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG2, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0b),
+};
+
+static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x65),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xf5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf1),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xed),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x3c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xb7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0xb7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_INITVAL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x01),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_EQ_CONFIG2, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x46),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_CFG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0xd0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MISC1, 0x88),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_DC_LEVEL_CTRL, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xcc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xcc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x29),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0xc5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xad),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xb6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xc7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xef),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x05),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
+};
+
+/* Register names should be validated, they might be different for this PHY */
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_EQ_CONFIG1, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3, 0x28),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
+};
+
+struct qmp_phy;
+
+/* struct qmp_phy_cfg - per-PHY initialization config */
+struct qmp_phy_cfg {
+ /* phy-type - PCIE/UFS/USB */
+ unsigned int type;
+ /* number of lanes provided by phy */
+ int nlanes;
+
+ /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
+ const struct qmp_phy_init_tbl *serdes_tbl;
+ int serdes_tbl_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_sec;
+ int serdes_tbl_num_sec;
+ const struct qmp_phy_init_tbl *tx_tbl;
+ int tx_tbl_num;
+ const struct qmp_phy_init_tbl *tx_tbl_sec;
+ int tx_tbl_num_sec;
+ const struct qmp_phy_init_tbl *rx_tbl;
+ int rx_tbl_num;
+ const struct qmp_phy_init_tbl *rx_tbl_sec;
+ int rx_tbl_num_sec;
+ const struct qmp_phy_init_tbl *pcs_tbl;
+ int pcs_tbl_num;
+ const struct qmp_phy_init_tbl *pcs_tbl_sec;
+ int pcs_tbl_num_sec;
+ const struct qmp_phy_init_tbl *pcs_misc_tbl;
+ int pcs_misc_tbl_num;
+ const struct qmp_phy_init_tbl *pcs_misc_tbl_sec;
+ int pcs_misc_tbl_num_sec;
+
+ /* Init sequence for DP PHY block link rates */
+ const struct qmp_phy_init_tbl *serdes_tbl_rbr;
+ int serdes_tbl_rbr_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr;
+ int serdes_tbl_hbr_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr2;
+ int serdes_tbl_hbr2_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
+ int serdes_tbl_hbr3_num;
+
+ /* DP PHY callbacks */
+ int (*configure_dp_phy)(struct qmp_phy *qphy);
+ void (*configure_dp_tx)(struct qmp_phy *qphy);
+ int (*calibrate_dp_phy)(struct qmp_phy *qphy);
+ void (*dp_aux_init)(struct qmp_phy *qphy);
+
+ /* clock ids to be requested */
+ const char * const *clk_list;
+ int num_clks;
+ /* resets to be requested */
+ const char * const *reset_list;
+ int num_resets;
+ /* regulators to be requested */
+ const char * const *vreg_list;
+ int num_vregs;
+
+ /* array of registers with different offsets */
+ const unsigned int *regs;
+
+ unsigned int start_ctrl;
+ unsigned int pwrdn_ctrl;
+ unsigned int mask_com_pcs_ready;
+ /* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
+ unsigned int phy_status;
+
+ /* true, if PHY has a separate PHY_COM control block */
+ bool has_phy_com_ctrl;
+ /* true, if PHY has a reset for individual lanes */
+ bool has_lane_rst;
+ /* true, if PHY needs delay after POWER_DOWN */
+ bool has_pwrdn_delay;
+ /* power_down delay in usec */
+ int pwrdn_delay_min;
+ int pwrdn_delay_max;
+
+ /* true, if PHY has a separate DP_COM control block */
+ bool has_phy_dp_com_ctrl;
+ /* true, if PHY has secondary tx/rx lanes to be configured */
+ bool is_dual_lane_phy;
+
+ /* true, if PCS block has no separate SW_RESET register */
+ bool no_pcs_sw_reset;
+};
+
+struct qmp_phy_combo_cfg {
+ const struct qmp_phy_cfg *usb_cfg;
+ const struct qmp_phy_cfg *dp_cfg;
+};
+
+/**
+ * struct qmp_phy - per-lane phy descriptor
+ *
+ * @phy: generic phy
+ * @cfg: phy specific configuration
+ * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
+ * @tx: iomapped memory space for lane's tx
+ * @rx: iomapped memory space for lane's rx
+ * @pcs: iomapped memory space for lane's pcs
+ * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
+ * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
+ * @pcs_misc: iomapped memory space for lane's pcs_misc
+ * @pipe_clk: pipe clock
+ * @index: lane index
+ * @qmp: QMP phy to which this lane belongs
+ * @lane_rst: lane's reset controller
+ * @mode: current PHY mode
+ * @dp_aux_cfg: Display port aux config
+ * @dp_opts: Display port optional config
+ * @dp_clks: Display port clocks
+ */
+struct qmp_phy {
+ struct phy *phy;
+ const struct qmp_phy_cfg *cfg;
+ void __iomem *serdes;
+ void __iomem *tx;
+ void __iomem *rx;
+ void __iomem *pcs;
+ void __iomem *tx2;
+ void __iomem *rx2;
+ void __iomem *pcs_misc;
+ struct clk *pipe_clk;
+ unsigned int index;
+ struct qcom_qmp *qmp;
+ struct reset_control *lane_rst;
+ enum phy_mode mode;
+ unsigned int dp_aux_cfg;
+ struct phy_configure_opts_dp dp_opts;
+ struct qmp_phy_dp_clks *dp_clks;
+};
+
+struct qmp_phy_dp_clks {
+ struct qmp_phy *qphy;
+ struct clk_hw dp_link_hw;
+ struct clk_hw dp_pixel_hw;
+};
+
+/**
+ * struct qcom_qmp - structure holding QMP phy block attributes
+ *
+ * @dev: device
+ * @dp_com: iomapped memory space for phy's dp_com control block
+ *
+ * @clks: array of clocks required by phy
+ * @resets: array of resets required by phy
+ * @vregs: regulator supplies bulk data
+ *
+ * @phys: array of per-lane phy descriptors
+ * @phy_mutex: mutex lock for PHY common block initialization
+ * @init_count: phy common block initialization count
+ * @ufs_reset: optional UFS PHY reset handle
+ */
+struct qcom_qmp {
+ struct device *dev;
+ void __iomem *dp_com;
+
+ struct clk_bulk_data *clks;
+ struct reset_control **resets;
+ struct regulator_bulk_data *vregs;
+
+ struct qmp_phy **phys;
+
+ struct mutex phy_mutex;
+ int init_count;
+
+ struct reset_control *ufs_reset;
+};
+
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
+
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
+
+static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg |= val;
+ writel(reg, base + offset);
+
+ /* ensure that above write is through */
+ readl(base + offset);
+}
+
+static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg &= ~val;
+ writel(reg, base + offset);
+
+ /* ensure that above write is through */
+ readl(base + offset);
+}
+
+/* list of clocks required by phy */
+static const char * const msm8996_phy_clk_l[] = {
+ "aux", "cfg_ahb", "ref",
+};
+
+static const char * const msm8996_ufs_phy_clk_l[] = {
+ "ref",
+};
+
+static const char * const qmp_v3_phy_clk_l[] = {
+ "aux", "cfg_ahb", "ref", "com_aux",
+};
+
+static const char * const sdm845_pciephy_clk_l[] = {
+ "aux", "cfg_ahb", "ref", "refgen",
+};
+
+static const char * const qmp_v4_phy_clk_l[] = {
+ "aux", "ref_clk_src", "ref", "com_aux",
+};
+
+/* the primary usb3 phy on sm8250 doesn't have a ref clock */
+static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
+ "aux", "ref_clk_src", "com_aux"
+};
+
+static const char * const sm8450_ufs_phy_clk_l[] = {
+ "qref", "ref", "ref_aux",
+};
+
+static const char * const sdm845_ufs_phy_clk_l[] = {
+ "ref", "ref_aux",
+};
+
+/* usb3 phy on sdx55 doesn't have com_aux clock */
+static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
+ "aux", "cfg_ahb", "ref"
+};
+
+static const char * const qcm2290_usb3phy_clk_l[] = {
+ "cfg_ahb", "ref", "com_aux",
+};
+
+/* list of resets */
+static const char * const msm8996_pciephy_reset_l[] = {
+ "phy", "common", "cfg",
+};
+
+static const char * const msm8996_usb3phy_reset_l[] = {
+ "phy", "common",
+};
+
+static const char * const sc7180_usb3phy_reset_l[] = {
+ "phy",
+};
+
+static const char * const qcm2290_usb3phy_reset_l[] = {
+ "phy_phy", "phy",
+};
+
+static const char * const sdm845_pciephy_reset_l[] = {
+ "phy",
+};
+
+/* list of regulators */
+static const char * const qmp_phy_vreg_l[] = {
+ "vdda-phy", "vdda-pll",
+};
+
+static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
+ .tx_tbl = msm8996_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
+ .rx_tbl = ipq8074_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_usb3_rx_tbl),
+ .pcs_tbl = ipq8074_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+};
+
+static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 3,
+
+ .serdes_tbl = msm8996_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl),
+ .tx_tbl = msm8996_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl),
+ .rx_tbl = msm8996_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl),
+ .pcs_tbl = msm8996_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | PLL_READY_GATE_EN,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .mask_com_pcs_ready = PCS_READY,
+ .phy_status = PHYSTATUS,
+
+ .has_phy_com_ctrl = true,
+ .has_lane_rst = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg msm8996_ufs_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8996_ufs_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes_tbl),
+ .tx_tbl = msm8996_ufs_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx_tbl),
+ .rx_tbl = msm8996_ufs_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx_tbl),
+
+ .clk_list = msm8996_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l),
+
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+
+ .regs = msm8996_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8996_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl),
+ .tx_tbl = msm8996_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
+ .rx_tbl = msm8996_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_usb3_rx_tbl),
+ .pcs_tbl = msm8996_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8996_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+};
+
+static const char * const ipq8074_pciephy_clk_l[] = {
+ "aux", "cfg_ahb",
+};
+/* list of resets */
+static const char * const ipq8074_pciephy_reset_l[] = {
+ "phy", "common",
+};
+
+static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
+ .tx_tbl = ipq8074_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_tx_tbl),
+ .rx_tbl = ipq8074_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
+ .pcs_tbl = ipq8074_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq6018_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
+ .tx_tbl = ipq6018_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq6018_pcie_tx_tbl),
+ .rx_tbl = ipq6018_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
+ .pcs_tbl = ipq6018_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = ipq_pciephy_gen3_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sdm845_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_serdes_tbl),
+ .tx_tbl = sdm845_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_tx_tbl),
+ .rx_tbl = sdm845_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_rx_tbl),
+ .pcs_tbl = sdm845_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sdm845_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_qmp_pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sdm845_qhp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_serdes_tbl),
+ .tx_tbl = sdm845_qhp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_tx_tbl),
+ .rx_tbl = sdm845_qhp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_rx_tbl),
+ .pcs_tbl = sdm845_qhp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_pcs_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_qhp_pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
+ .serdes_tbl_sec = sm8250_qmp_gen3x1_pcie_serdes_tbl,
+ .serdes_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_serdes_tbl),
+ .tx_tbl = sm8250_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
+ .rx_tbl = sm8250_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
+ .rx_tbl_sec = sm8250_qmp_gen3x1_pcie_rx_tbl,
+ .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_rx_tbl),
+ .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
+ .pcs_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_tbl,
+ .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
+ .pcs_misc_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
+ .tx_tbl = sm8250_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
+ .tx_tbl_sec = sm8250_qmp_gen3x2_pcie_tx_tbl,
+ .tx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_tx_tbl),
+ .rx_tbl = sm8250_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
+ .rx_tbl_sec = sm8250_qmp_gen3x2_pcie_rx_tbl,
+ .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_rx_tbl),
+ .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
+ .pcs_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_tbl,
+ .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
+ .pcs_misc_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .tx_tbl = qmp_v3_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
+ .usb_cfg = &sc7180_usb3phy_cfg,
+ .dp_cfg = &sc7180_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sdm845_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
+ .tx_tbl = sdm845_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
+ .rx_tbl = sdm845_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
+ .pcs_tbl = sdm845_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 1,
+
+ .serdes_tbl = sm6115_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
+ .tx_tbl = sm6115_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
+ .rx_tbl = sm6115_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
+ .pcs_tbl = sm6115_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm6115_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .is_dual_lane_phy = false,
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8998_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl),
+ .tx_tbl = msm8998_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8998_pcie_tx_tbl),
+ .rx_tbl = msm8998_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8998_pcie_rx_tbl),
+ .pcs_tbl = msm8998_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+};
+
+static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8998_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
+ .tx_tbl = msm8998_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8998_usb3_tx_tbl),
+ .rx_tbl = msm8998_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
+ .pcs_tbl = msm8998_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8150_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
+ .tx_tbl = sm8150_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
+ .rx_tbl = sm8150_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
+ .pcs_tbl = sm8150_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8150_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_tx_tbl),
+ .rx_tbl = sm8150_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
+ .pcs_tbl = sm8150_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sc8180x_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_serdes_tbl),
+ .tx_tbl = sc8180x_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl),
+ .rx_tbl = sc8180x_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_rx_tbl),
+ .pcs_tbl = sc8180x_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sc8180x_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .tx_tbl = qmp_v4_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
+ .usb_cfg = &sm8150_usb3phy_cfg,
+ .dp_cfg = &sc8180x_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8150_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8150_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8250_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_tx_tbl),
+ .rx_tbl = sm8250_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
+ .pcs_tbl = sm8250_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8250_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8250_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .tx_tbl = qmp_v4_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
+ .usb_cfg = &sm8250_usb3phy_cfg,
+ .dp_cfg = &sm8250_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sdx55_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_tx_tbl),
+ .rx_tbl = sdx55_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_sdx55_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sdx55_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_serdes_tbl),
+ .tx_tbl = sdx55_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_tx_tbl),
+ .rx_tbl = sdx55_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_rx_tbl),
+ .pcs_tbl = sdx55_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sdx55_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS_4_20,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sdx65_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_tx_tbl),
+ .rx_tbl = sdx65_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_sdx55_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8350_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8350_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+ .tx_tbl = sm8350_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+ .rx_tbl = sm8350_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+ .pcs_tbl = sm8350_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8350_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_tx_tbl),
+ .rx_tbl = sm8350_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl),
+ .pcs_tbl = sm8350_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl),
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8350_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8350_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8350_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8350_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+ .tx_tbl = sm8350_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+ .rx_tbl = sm8350_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+ .pcs_tbl = sm8350_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .clk_list = sm8450_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8450_qmp_gen3x1_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl),
+ .tx_tbl = sm8450_qmp_gen3x1_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl),
+ .rx_tbl = sm8450_qmp_gen3x1_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl),
+ .pcs_tbl = sm8450_qmp_gen3x1_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8450_qmp_gen4x2_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_serdes_tbl),
+ .tx_tbl = sm8450_qmp_gen4x2_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_tx_tbl),
+ .rx_tbl = sm8450_qmp_gen4x2_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_rx_tbl),
+ .pcs_tbl = sm8450_qmp_gen4x2_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8450_qmp_gen4x2_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS_4_20,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qcm2290_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
+ .tx_tbl = qcm2290_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qcm2290_usb3_tx_tbl),
+ .rx_tbl = qcm2290_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qcm2290_usb3_rx_tbl),
+ .pcs_tbl = qcm2290_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
+ .clk_list = qcm2290_usb3phy_clk_l,
+ .num_clks = ARRAY_SIZE(qcm2290_usb3phy_clk_l),
+ .reset_list = qcm2290_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qcm2290_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static void qcom_qmp_phy_configure_lane(void __iomem *base,
+ const unsigned int *regs,
+ const struct qmp_phy_init_tbl tbl[],
+ int num,
+ u8 lane_mask)
+{
+ int i;
+ const struct qmp_phy_init_tbl *t = tbl;
+
+ if (!t)
+ return;
+
+ for (i = 0; i < num; i++, t++) {
+ if (!(t->lane_mask & lane_mask))
+ continue;
+
+ if (t->in_layout)
+ writel(t->val, base + regs[t->offset]);
+ else
+ writel(t->val, base + t->offset);
+ }
+}
+
+static void qcom_qmp_phy_configure(void __iomem *base,
+ const unsigned int *regs,
+ const struct qmp_phy_init_tbl tbl[],
+ int num)
+{
+ qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff);
+}
+
+static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
+ int serdes_tbl_num = cfg->serdes_tbl_num;
+ int ret;
+
+ qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
+ if (cfg->serdes_tbl_sec)
+ qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
+ cfg->serdes_tbl_num_sec);
+
+ if (cfg->type == PHY_TYPE_DP) {
+ switch (dp_opts->link_rate) {
+ case 1620:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_rbr,
+ cfg->serdes_tbl_rbr_num);
+ break;
+ case 2700:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr,
+ cfg->serdes_tbl_hbr_num);
+ break;
+ case 5400:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr2,
+ cfg->serdes_tbl_hbr2_num);
+ break;
+ case 8100:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr3,
+ cfg->serdes_tbl_hbr3_num);
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ }
+
+
+ if (cfg->has_phy_com_ctrl) {
+ void __iomem *status;
+ unsigned int mask, val;
+
+ qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+ SERDES_START | PCS_START);
+
+ status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
+ mask = cfg->mask_com_pcs_ready;
+
+ ret = readl_poll_timeout(status, val, (val & mask), 10,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev,
+ "phy common block init timed-out\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
+{
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ /* Turn on BIAS current for PHY/PLL */
+ writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
+ QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
+ qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN |
+ DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
+ DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(QSERDES_V3_COM_BIAS_EN |
+ QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
+ QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
+ QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
+ qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0x24, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xbb, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qphy->dp_aux_cfg = 0;
+
+ writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+ PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+ PHY_AUX_REQ_ERR_MASK,
+ qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
+}
+
+static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
+ { 0x00, 0x0c, 0x15, 0x1a },
+ { 0x02, 0x0e, 0x16, 0xff },
+ { 0x02, 0x11, 0xff, 0xff },
+ { 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
+ { 0x02, 0x12, 0x16, 0x1a },
+ { 0x09, 0x19, 0x1f, 0xff },
+ { 0x10, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
+ { 0x00, 0x0c, 0x14, 0x19 },
+ { 0x00, 0x0b, 0x12, 0xff },
+ { 0x00, 0x0b, 0xff, 0xff },
+ { 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
+ { 0x08, 0x0f, 0x16, 0x1f },
+ { 0x11, 0x1e, 0x1f, 0xff },
+ { 0x19, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
+ unsigned int drv_lvl_reg, unsigned int emp_post_reg)
+{
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ unsigned int v_level = 0, p_level = 0;
+ u8 voltage_swing_cfg, pre_emphasis_cfg;
+ int i;
+
+ for (i = 0; i < dp_opts->lanes; i++) {
+ v_level = max(v_level, dp_opts->voltage[i]);
+ p_level = max(p_level, dp_opts->pre[i]);
+ }
+
+ if (dp_opts->link_rate <= 2700) {
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
+ } else {
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
+ }
+
+ /* TODO: Move check to config check */
+ if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
+ return -EINVAL;
+
+ /* Enable MUX to use Cursor values from these registers */
+ voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
+ pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
+
+ writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
+ writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
+
+ return 0;
+}
+
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
+{
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 bias_en, drvr_en;
+
+ if (qcom_qmp_phy_configure_dp_swing(qphy,
+ QSERDES_V3_TX_TX_DRV_LVL,
+ QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
+ return;
+
+ if (dp_opts->lanes == 1) {
+ bias_en = 0x3e;
+ drvr_en = 0x13;
+ } else {
+ bias_en = 0x3f;
+ drvr_en = 0x10;
+ }
+
+ writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+}
+
+static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy)
+{
+ u32 val;
+ bool reverse = false;
+
+ val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
+
+ /*
+ * TODO: Assume orientation is CC1 for now and two lanes, need to
+ * use type-c connector to understand orientation and lanes.
+ *
+ * Otherwise val changes to be like below if this code understood
+ * the orientation of the type-c cable.
+ *
+ * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
+ * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
+ * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
+ * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
+ * if (orientation == ORIENTATION_CC2)
+ * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
+ */
+ val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
+ writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
+
+ return reverse;
+}
+
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 phy_vco_div, status;
+ unsigned long pixel_freq;
+
+ qcom_qmp_phy_configure_dp_mode(qphy);
+
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ phy_vco_div = 0x1;
+ pixel_freq = 1620000000UL / 2;
+ break;
+ case 2700:
+ phy_vco_div = 0x1;
+ pixel_freq = 2700000000UL / 2;
+ break;
+ case 5400:
+ phy_vco_div = 0x2;
+ pixel_freq = 5400000000UL / 4;
+ break;
+ case 8100:
+ phy_vco_div = 0x0;
+ pixel_freq = 8100000000UL / 6;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
+
+ clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
+ clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
+
+ writel(0x04, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ udelay(2000);
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000);
+}
+
+/*
+ * We need to calibrate the aux setting here as many times
+ * as the caller tries
+ */
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
+{
+ static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
+ u8 val;
+
+ qphy->dp_aux_cfg++;
+ qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qphy->dp_aux_cfg];
+
+ writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+
+ return 0;
+}
+
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
+{
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ /* Turn on BIAS current for PHY/PLL */
+ writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qphy->dp_aux_cfg = 0;
+
+ writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+ PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+ PHY_AUX_REQ_ERR_MASK,
+ qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
+}
+
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
+{
+ /* Program default values before writing proper values */
+ writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+
+ writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+
+ qcom_qmp_phy_configure_dp_swing(qphy,
+ QSERDES_V4_TX_TX_DRV_LVL,
+ QSERDES_V4_TX_TX_EMP_POST1_LVL);
+}
+
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 phy_vco_div, status;
+ unsigned long pixel_freq;
+ u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
+ bool reverse;
+
+ writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
+
+ reverse = qcom_qmp_phy_configure_dp_mode(qphy);
+
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+
+ writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ phy_vco_div = 0x1;
+ pixel_freq = 1620000000UL / 2;
+ break;
+ case 2700:
+ phy_vco_div = 0x1;
+ pixel_freq = 2700000000UL / 2;
+ break;
+ case 5400:
+ phy_vco_div = 0x2;
+ pixel_freq = 5400000000UL / 4;
+ break;
+ case 8100:
+ phy_vco_div = 0x0;
+ pixel_freq = 8100000000UL / 6;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
+
+ clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
+ clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
+
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ /*
+ * At least for 7nm DP PHY this has to be done after enabling link
+ * clock.
+ */
+
+ if (dp_opts->lanes == 1) {
+ bias0_en = reverse ? 0x3e : 0x15;
+ bias1_en = reverse ? 0x15 : 0x3e;
+ drvr0_en = reverse ? 0x13 : 0x10;
+ drvr1_en = reverse ? 0x10 : 0x13;
+ } else if (dp_opts->lanes == 2) {
+ bias0_en = reverse ? 0x3f : 0x15;
+ bias1_en = reverse ? 0x15 : 0x3f;
+ drvr0_en = 0x10;
+ drvr1_en = 0x10;
+ } else {
+ bias0_en = 0x3f;
+ bias1_en = 0x3f;
+ drvr0_en = 0x10;
+ drvr1_en = 0x10;
+ }
+
+ writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+
+ writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ udelay(2000);
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
+
+ writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+
+ writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+
+ return 0;
+}
+
+/*
+ * We need to calibrate the aux setting here as many times
+ * as the caller tries
+ */
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
+{
+ static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
+ u8 val;
+
+ qphy->dp_aux_cfg++;
+ qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qphy->dp_aux_cfg];
+
+ writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+
+ return 0;
+}
+
+static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ const struct phy_configure_opts_dp *dp_opts = &opts->dp;
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
+ if (qphy->dp_opts.set_voltages) {
+ cfg->configure_dp_tx(qphy);
+ qphy->dp_opts.set_voltages = 0;
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ if (cfg->calibrate_dp_phy)
+ return cfg->calibrate_dp_phy(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *dp_com = qmp->dp_com;
+ int ret, i;
+
+ mutex_lock(&qmp->phy_mutex);
+ if (qmp->init_count++) {
+ mutex_unlock(&qmp->phy_mutex);
+ return 0;
+ }
+
+ /* turn on regulator supplies */
+ ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
+ if (ret) {
+ dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
+ goto err_unlock;
+ }
+
+ for (i = 0; i < cfg->num_resets; i++) {
+ ret = reset_control_assert(qmp->resets[i]);
+ if (ret) {
+ dev_err(qmp->dev, "%s reset assert failed\n",
+ cfg->reset_list[i]);
+ goto err_disable_regulators;
+ }
+ }
+
+ for (i = cfg->num_resets - 1; i >= 0; i--) {
+ ret = reset_control_deassert(qmp->resets[i]);
+ if (ret) {
+ dev_err(qmp->dev, "%s reset deassert failed\n",
+ qphy->cfg->reset_list[i]);
+ goto err_assert_reset;
+ }
+ }
+
+ ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ if (ret)
+ goto err_assert_reset;
+
+ if (cfg->has_phy_dp_com_ctrl) {
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
+ SW_PWRDN);
+ /* override hardware control for reset of qmp phy */
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+ SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+ SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+ /* Default type-c orientation, i.e CC1 */
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
+
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
+ USB3_MODE | DP_MODE);
+
+ /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+ SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+ SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
+ }
+
+ if (cfg->has_phy_com_ctrl) {
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
+ SW_PWRDN);
+ } else {
+ if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
+ qphy_setbits(pcs,
+ cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);
+ else
+ qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL,
+ cfg->pwrdn_ctrl);
+ }
+
+ mutex_unlock(&qmp->phy_mutex);
+
+ return 0;
+
+err_assert_reset:
+ while (++i < cfg->num_resets)
+ reset_control_assert(qmp->resets[i]);
+err_disable_regulators:
+ regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+err_unlock:
+ mutex_unlock(&qmp->phy_mutex);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ int i = cfg->num_resets;
+
+ mutex_lock(&qmp->phy_mutex);
+ if (--qmp->init_count) {
+ mutex_unlock(&qmp->phy_mutex);
+ return 0;
+ }
+
+ reset_control_assert(qmp->ufs_reset);
+ if (cfg->has_phy_com_ctrl) {
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+ SERDES_START | PCS_START);
+ qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET],
+ SW_RESET);
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
+ SW_PWRDN);
+ }
+
+ while (--i >= 0)
+ reset_control_assert(qmp->resets[i]);
+
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+ regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+
+ mutex_unlock(&qmp->phy_mutex);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_init(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ int ret;
+ dev_vdbg(qmp->dev, "Initializing QMP phy\n");
+
+ if (cfg->no_pcs_sw_reset) {
+ /*
+ * Get UFS reset, which is delayed until now to avoid a
+ * circular dependency where UFS needs its PHY, but the PHY
+ * needs this UFS reset.
+ */
+ if (!qmp->ufs_reset) {
+ qmp->ufs_reset =
+ devm_reset_control_get_exclusive(qmp->dev,
+ "ufsphy");
+
+ if (IS_ERR(qmp->ufs_reset)) {
+ ret = PTR_ERR(qmp->ufs_reset);
+ dev_err(qmp->dev,
+ "failed to get UFS reset: %d\n",
+ ret);
+
+ qmp->ufs_reset = NULL;
+ return ret;
+ }
+ }
+
+ ret = reset_control_assert(qmp->ufs_reset);
+ if (ret)
+ return ret;
+ }
+
+ ret = qcom_qmp_phy_com_init(qphy);
+ if (ret)
+ return ret;
+
+ if (cfg->type == PHY_TYPE_DP)
+ cfg->dp_aux_init(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_power_on(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *tx = qphy->tx;
+ void __iomem *rx = qphy->rx;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+ void __iomem *status;
+ unsigned int mask, val, ready;
+ int ret;
+
+ qcom_qmp_phy_serdes_init(qphy);
+
+ if (cfg->has_lane_rst) {
+ ret = reset_control_deassert(qphy->lane_rst);
+ if (ret) {
+ dev_err(qmp->dev, "lane%d reset deassert failed\n",
+ qphy->index);
+ return ret;
+ }
+ }
+
+ ret = clk_prepare_enable(qphy->pipe_clk);
+ if (ret) {
+ dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
+ goto err_reset_lane;
+ }
+
+ /* Tx, Rx, and PCS configurations */
+ qcom_qmp_phy_configure_lane(tx, cfg->regs,
+ cfg->tx_tbl, cfg->tx_tbl_num, 1);
+ if (cfg->tx_tbl_sec)
+ qcom_qmp_phy_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
+ cfg->tx_tbl_num_sec, 1);
+
+ /* Configuration for other LANE for USB-DP combo PHY */
+ if (cfg->is_dual_lane_phy) {
+ qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
+ cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ if (cfg->tx_tbl_sec)
+ qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
+ cfg->tx_tbl_sec,
+ cfg->tx_tbl_num_sec, 2);
+ }
+
+ /* Configure special DP tx tunings */
+ if (cfg->type == PHY_TYPE_DP)
+ cfg->configure_dp_tx(qphy);
+
+ qcom_qmp_phy_configure_lane(rx, cfg->regs,
+ cfg->rx_tbl, cfg->rx_tbl_num, 1);
+ if (cfg->rx_tbl_sec)
+ qcom_qmp_phy_configure_lane(rx, cfg->regs,
+ cfg->rx_tbl_sec, cfg->rx_tbl_num_sec, 1);
+
+ if (cfg->is_dual_lane_phy) {
+ qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
+ cfg->rx_tbl, cfg->rx_tbl_num, 2);
+ if (cfg->rx_tbl_sec)
+ qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
+ cfg->rx_tbl_sec,
+ cfg->rx_tbl_num_sec, 2);
+ }
+
+ /* Configure link rate, swing, etc. */
+ if (cfg->type == PHY_TYPE_DP) {
+ cfg->configure_dp_phy(qphy);
+ } else {
+ qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+ if (cfg->pcs_tbl_sec)
+ qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
+ cfg->pcs_tbl_num_sec);
+ }
+
+ ret = reset_control_deassert(qmp->ufs_reset);
+ if (ret)
+ goto err_disable_pipe_clk;
+
+ qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
+ cfg->pcs_misc_tbl_num);
+ if (cfg->pcs_misc_tbl_sec)
+ qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
+ cfg->pcs_misc_tbl_num_sec);
+
+ /*
+ * Pull out PHY from POWER DOWN state.
+ * This is active low enable signal to power-down PHY.
+ */
+ if(cfg->type == PHY_TYPE_PCIE)
+ qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
+
+ if (cfg->has_pwrdn_delay)
+ usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
+
+ if (cfg->type != PHY_TYPE_DP) {
+ /* Pull PHY out of reset state */
+ if (!cfg->no_pcs_sw_reset)
+ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+ /* start SerDes and Phy-Coding-Sublayer */
+ qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+ if (cfg->type == PHY_TYPE_UFS) {
+ status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
+ mask = PCS_READY;
+ ready = PCS_READY;
+ } else {
+ status = pcs + cfg->regs[QPHY_PCS_STATUS];
+ mask = cfg->phy_status;
+ ready = 0;
+ }
+
+ ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev, "phy initialization timed-out\n");
+ goto err_disable_pipe_clk;
+ }
+ }
+ return 0;
+
+err_disable_pipe_clk:
+ clk_disable_unprepare(qphy->pipe_clk);
+err_reset_lane:
+ if (cfg->has_lane_rst)
+ reset_control_assert(qphy->lane_rst);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_power_off(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ clk_disable_unprepare(qphy->pipe_clk);
+
+ if (cfg->type == PHY_TYPE_DP) {
+ /* Assert DP PHY power down */
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ } else {
+ /* PHY reset */
+ if (!cfg->no_pcs_sw_reset)
+ qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+
+ /* stop SerDes and Phy-Coding-Sublayer */
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+ /* Put PHY into POWER DOWN state: active low */
+ if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);
+ } else {
+ qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL,
+ cfg->pwrdn_ctrl);
+ }
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_phy_exit(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ if (cfg->has_lane_rst)
+ reset_control_assert(qphy->lane_rst);
+
+ qcom_qmp_phy_com_exit(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_enable(struct phy *phy)
+{
+ int ret;
+
+ ret = qcom_qmp_phy_init(phy);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_power_on(phy);
+ if (ret)
+ qcom_qmp_phy_exit(phy);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_disable(struct phy *phy)
+{
+ int ret;
+
+ ret = qcom_qmp_phy_power_off(phy);
+ if (ret)
+ return ret;
+ return qcom_qmp_phy_exit(phy);
+}
+
+static int qcom_qmp_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+
+ qphy->mode = mode;
+
+ return 0;
+}
+
+static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+ u32 intr_mask;
+
+ if (qphy->mode == PHY_MODE_USB_HOST_SS ||
+ qphy->mode == PHY_MODE_USB_DEVICE_SS)
+ intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
+ else
+ intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
+
+ /* Clear any pending interrupts status */
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ /* Writing 1 followed by 0 clears the interrupt */
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
+
+ /* Enable required PHY autonomous mode interrupts */
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
+
+ /* Enable i/o clamp_n for autonomous mode */
+ if (pcs_misc)
+ qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
+}
+
+static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+
+ /* Disable i/o clamp_n on resume for normal mode */
+ if (pcs_misc)
+ qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
+
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
+
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ /* Writing 1 followed by 0 clears the interrupt */
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+}
+
+static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_phy *qphy = qmp->phys[0];
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
+
+ /* Supported only for USB3 PHY and luckily USB3 is the first phy */
+ if (cfg->type != PHY_TYPE_USB3)
+ return 0;
+
+ if (!qmp->init_count) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ qcom_qmp_phy_enable_autonomous_mode(qphy);
+
+ clk_disable_unprepare(qphy->pipe_clk);
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+ return 0;
+}
+
+static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_phy *qphy = qmp->phys[0];
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ int ret = 0;
+
+ dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
+
+ /* Supported only for USB3 PHY and luckily USB3 is the first phy */
+ if (cfg->type != PHY_TYPE_USB3)
+ return 0;
+
+ if (!qmp->init_count) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(qphy->pipe_clk);
+ if (ret) {
+ dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+ return ret;
+ }
+
+ qcom_qmp_phy_disable_autonomous_mode(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int num = cfg->num_vregs;
+ int i;
+
+ qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
+ if (!qmp->vregs)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++)
+ qmp->vregs[i].supply = cfg->vreg_list[i];
+
+ return devm_regulator_bulk_get(dev, num, qmp->vregs);
+}
+
+static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int i;
+
+ qmp->resets = devm_kcalloc(dev, cfg->num_resets,
+ sizeof(*qmp->resets), GFP_KERNEL);
+ if (!qmp->resets)
+ return -ENOMEM;
+
+ for (i = 0; i < cfg->num_resets; i++) {
+ struct reset_control *rst;
+ const char *name = cfg->reset_list[i];
+
+ rst = devm_reset_control_get_exclusive(dev, name);
+ if (IS_ERR(rst)) {
+ dev_err(dev, "failed to get %s reset\n", name);
+ return PTR_ERR(rst);
+ }
+ qmp->resets[i] = rst;
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int num = cfg->num_clks;
+ int i;
+
+ qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
+ if (!qmp->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++)
+ qmp->clks[i].id = cfg->clk_list[i];
+
+ return devm_clk_bulk_get(dev, num, qmp->clks);
+}
+
+static void phy_clk_release_provider(void *res)
+{
+ of_clk_del_provider(res);
+}
+
+/*
+ * Register a fixed rate pipe clock.
+ *
+ * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
+ * controls it. The <s>_pipe_clk coming out of the GCC is requested
+ * by the PHY driver for its operations.
+ * We register the <s>_pipe_clksrc here. The gcc driver takes care
+ * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
+ * Below picture shows this relationship.
+ *
+ * +---------------+
+ * | PHY block |<<---------------------------------------+
+ * | | |
+ * | +-------+ | +-----+ |
+ * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
+ * clk | +-------+ | +-----+
+ * +---------------+
+ */
+static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
+{
+ struct clk_fixed_rate *fixed;
+ struct clk_init_data init = { };
+ int ret;
+
+ ret = of_property_read_string(np, "clock-output-names", &init.name);
+ if (ret) {
+ dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
+ return ret;
+ }
+
+ fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
+ if (!fixed)
+ return -ENOMEM;
+
+ init.ops = &clk_fixed_rate_ops;
+
+ /* controllers using QMP phys use 125MHz pipe clock interface */
+ fixed->fixed_rate = 125000000;
+ fixed->hw.init = &init;
+
+ ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
+ if (ret)
+ return ret;
+
+ /*
+ * Roll a devm action because the clock provider is the child node, but
+ * the child node is not actually a device.
+ */
+ return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
+}
+
+/*
+ * Display Port PLL driver block diagram for branch clocks
+ *
+ * +------------------------------+
+ * | DP_VCO_CLK |
+ * | |
+ * | +-------------------+ |
+ * | | (DP PLL/VCO) | |
+ * | +---------+---------+ |
+ * | v |
+ * | +----------+-----------+ |
+ * | | hsclk_divsel_clk_src | |
+ * | +----------+-----------+ |
+ * +------------------------------+
+ * |
+ * +---------<---------v------------>----------+
+ * | |
+ * +--------v----------------+ |
+ * | dp_phy_pll_link_clk | |
+ * | link_clk | |
+ * +--------+----------------+ |
+ * | |
+ * | |
+ * v v
+ * Input to DISPCC block |
+ * for link clk, crypto clk |
+ * and interface clock |
+ * |
+ * |
+ * +--------<------------+-----------------+---<---+
+ * | | |
+ * +----v---------+ +--------v-----+ +--------v------+
+ * | vco_divided | | vco_divided | | vco_divided |
+ * | _clk_src | | _clk_src | | _clk_src |
+ * | | | | | |
+ * |divsel_six | | divsel_two | | divsel_four |
+ * +-------+------+ +-----+--------+ +--------+------+
+ * | | |
+ * v---->----------v-------------<------v
+ * |
+ * +----------+-----------------+
+ * | dp_phy_pll_vco_div_clk |
+ * +---------+------------------+
+ * |
+ * v
+ * Input to DISPCC block
+ * for DP pixel clock
+ *
+ */
+static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 1620000000UL / 2:
+ case 2700000000UL / 2:
+ /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qmp_phy_dp_clks *dp_clks;
+ const struct qmp_phy *qphy;
+ const struct phy_configure_opts_dp *dp_opts;
+
+ dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
+ qphy = dp_clks->qphy;
+ dp_opts = &qphy->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ return 1620000000UL / 2;
+ case 2700:
+ return 2700000000UL / 2;
+ case 5400:
+ return 5400000000UL / 4;
+ case 8100:
+ return 8100000000UL / 6;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = {
+ .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate,
+ .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate,
+};
+
+static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 162000000:
+ case 270000000:
+ case 540000000:
+ case 810000000:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qmp_phy_dp_clks *dp_clks;
+ const struct qmp_phy *qphy;
+ const struct phy_configure_opts_dp *dp_opts;
+
+ dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
+ qphy = dp_clks->qphy;
+ dp_opts = &qphy->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ case 2700:
+ case 5400:
+ case 8100:
+ return dp_opts->link_rate * 100000;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_qmp_dp_link_clk_ops = {
+ .determine_rate = qcom_qmp_dp_link_clk_determine_rate,
+ .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate,
+};
+
+static struct clk_hw *
+qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct qmp_phy_dp_clks *dp_clks = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx >= 2) {
+ pr_err("%s: invalid index %u\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (idx == 0)
+ return &dp_clks->dp_link_hw;
+
+ return &dp_clks->dp_pixel_hw;
+}
+
+static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
+ struct device_node *np)
+{
+ struct clk_init_data init = { };
+ struct qmp_phy_dp_clks *dp_clks;
+ char name[64];
+ int ret;
+
+ dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
+ if (!dp_clks)
+ return -ENOMEM;
+
+ dp_clks->qphy = qphy;
+ qphy->dp_clks = dp_clks;
+
+ snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
+ init.ops = &qcom_qmp_dp_link_clk_ops;
+ init.name = name;
+ dp_clks->dp_link_hw.init = &init;
+ ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
+ if (ret)
+ return ret;
+
+ snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev));
+ init.ops = &qcom_qmp_dp_pixel_clk_ops;
+ init.name = name;
+ dp_clks->dp_pixel_hw.init = &init;
+ ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks);
+ if (ret)
+ return ret;
+
+ /*
+ * Roll a devm action because the clock provider is the child node, but
+ * the child node is not actually a device.
+ */
+ return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
+}
+
+static const struct phy_ops qcom_qmp_phy_gen_ops = {
+ .init = qcom_qmp_phy_enable,
+ .exit = qcom_qmp_phy_disable,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops qcom_qmp_phy_dp_ops = {
+ .init = qcom_qmp_phy_init,
+ .configure = qcom_qmp_dp_phy_configure,
+ .power_on = qcom_qmp_phy_power_on,
+ .calibrate = qcom_qmp_dp_phy_calibrate,
+ .power_off = qcom_qmp_phy_power_off,
+ .exit = qcom_qmp_phy_exit,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
+ .power_on = qcom_qmp_phy_enable,
+ .power_off = qcom_qmp_phy_disable,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static void qcom_qmp_reset_control_put(void *data)
+{
+ reset_control_put(data);
+}
+
+static
+int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
+ void __iomem *serdes, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct phy *generic_phy;
+ struct qmp_phy *qphy;
+ const struct phy_ops *ops;
+ char prop_name[MAX_PROP_NAME];
+ int ret;
+
+ qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
+ if (!qphy)
+ return -ENOMEM;
+
+ qphy->cfg = cfg;
+ qphy->serdes = serdes;
+ /*
+ * Get memory resources for each phy lane:
+ * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
+ * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
+ * For single lane PHYs: pcs_misc (optional) -> 3.
+ */
+ qphy->tx = of_iomap(np, 0);
+ if (!qphy->tx)
+ return -ENOMEM;
+
+ qphy->rx = of_iomap(np, 1);
+ if (!qphy->rx)
+ return -ENOMEM;
+
+ qphy->pcs = of_iomap(np, 2);
+ if (!qphy->pcs)
+ return -ENOMEM;
+
+ /*
+ * If this is a dual-lane PHY, then there should be registers for the
+ * second lane. Some old device trees did not specify this, so fall
+ * back to old legacy behavior of assuming they can be reached at an
+ * offset from the first lane.
+ */
+ if (cfg->is_dual_lane_phy) {
+ qphy->tx2 = of_iomap(np, 3);
+ qphy->rx2 = of_iomap(np, 4);
+ if (!qphy->tx2 || !qphy->rx2) {
+ dev_warn(dev,
+ "Underspecified device tree, falling back to legacy register regions\n");
+
+ /* In the old version, pcs_misc is at index 3. */
+ qphy->pcs_misc = qphy->tx2;
+ qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
+ qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
+
+ } else {
+ qphy->pcs_misc = of_iomap(np, 5);
+ }
+
+ } else {
+ qphy->pcs_misc = of_iomap(np, 3);
+ }
+
+ if (!qphy->pcs_misc)
+ dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
+
+ /*
+ * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
+ * based phys, so they essentially have pipe clock. So,
+ * we return error in case phy is USB3 or PIPE type.
+ * Otherwise, we initialize pipe clock to NULL for
+ * all phys that don't need this.
+ */
+ snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
+ qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
+ if (IS_ERR(qphy->pipe_clk)) {
+ if (cfg->type == PHY_TYPE_PCIE ||
+ cfg->type == PHY_TYPE_USB3) {
+ ret = PTR_ERR(qphy->pipe_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev,
+ "failed to get lane%d pipe_clk, %d\n",
+ id, ret);
+ return ret;
+ }
+ qphy->pipe_clk = NULL;
+ }
+
+ /* Get lane reset, if any */
+ if (cfg->has_lane_rst) {
+ snprintf(prop_name, sizeof(prop_name), "lane%d", id);
+ qphy->lane_rst = of_reset_control_get_exclusive(np, prop_name);
+ if (IS_ERR(qphy->lane_rst)) {
+ dev_err(dev, "failed to get lane%d reset\n", id);
+ return PTR_ERR(qphy->lane_rst);
+ }
+ ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put,
+ qphy->lane_rst);
+ if (ret)
+ return ret;
+ }
+
+ if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE)
+ ops = &qcom_qmp_pcie_ufs_ops;
+ else if (cfg->type == PHY_TYPE_DP)
+ ops = &qcom_qmp_phy_dp_ops;
+ else
+ ops = &qcom_qmp_phy_gen_ops;
+
+ generic_phy = devm_phy_create(dev, np, ops);
+ if (IS_ERR(generic_phy)) {
+ ret = PTR_ERR(generic_phy);
+ dev_err(dev, "failed to create qphy %d\n", ret);
+ return ret;
+ }
+
+ qphy->phy = generic_phy;
+ qphy->index = id;
+ qphy->qmp = qmp;
+ qmp->phys[id] = qphy;
+ phy_set_drvdata(generic_phy, qphy);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,ipq8074-qmp-usb3-phy",
+ .data = &ipq8074_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-pcie-phy",
+ .data = &msm8996_pciephy_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-ufs-phy",
+ .data = &msm8996_ufs_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-usb3-phy",
+ .data = &msm8996_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-pcie-phy",
+ .data = &msm8998_pciephy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,ipq8074-qmp-pcie-phy",
+ .data = &ipq8074_pciephy_cfg,
+ }, {
+ .compatible = "qcom,ipq6018-qmp-pcie-phy",
+ .data = &ipq6018_pciephy_cfg,
+ }, {
+ .compatible = "qcom,ipq6018-qmp-usb3-phy",
+ .data = &ipq8074_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc7180-qmp-usb3-phy",
+ .data = &sc7180_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sc8180x-qmp-pcie-phy",
+ .data = &sc8180x_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sc8280xp-qmp-ufs-phy",
+ .data = &sm8350_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-usb3-phy",
+ .data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sdm845-qhp-pcie-phy",
+ .data = &sdm845_qhp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-pcie-phy",
+ .data = &sdm845_qmp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-usb3-phy",
+ .data = &qmp_v3_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-usb3-uni-phy",
+ .data = &qmp_v3_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-usb3-phy",
+ .data = &msm8998_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm6115-qmp-ufs-phy",
+ .data = &sm6115_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm6350-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-phy",
+ .data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-uni-phy",
+ .data = &sm8150_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-phy",
+ .data = &sm8250_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-uni-phy",
+ .data = &sm8250_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy",
+ .data = &sm8250_qmp_gen3x1_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy",
+ .data = &sm8250_qmp_gen3x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-ufs-phy",
+ .data = &sm8350_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-modem-pcie-phy",
+ .data = &sm8250_qmp_gen3x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdx55-qmp-pcie-phy",
+ .data = &sdx55_qmp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdx55-qmp-usb3-uni-phy",
+ .data = &sdx55_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sdx65-qmp-usb3-uni-phy",
+ .data = &sdx65_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-usb3-phy",
+ .data = &sm8350_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-usb3-uni-phy",
+ .data = &sm8350_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
+ .data = &sm8450_qmp_gen3x1_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
+ .data = &sm8450_qmp_gen4x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-ufs-phy",
+ .data = &sm8450_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-usb3-phy",
+ .data = &sm8350_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,qcm2290-qmp-usb3-phy",
+ .data = &qcm2290_usb3phy_cfg,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
+
+static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ .data = &sc7180_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ .data = &sm8250_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ .data = &sc8180x_usb3dpphy_cfg,
+ },
+ { }
+};
+
+static const struct dev_pm_ops qcom_qmp_phy_pm_ops = {
+ SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend,
+ qcom_qmp_phy_runtime_resume, NULL)
+};
+
+static int qcom_qmp_phy_probe(struct platform_device *pdev)
+{
+ struct qcom_qmp *qmp;
+ struct device *dev = &pdev->dev;
+ struct device_node *child;
+ struct phy_provider *phy_provider;
+ void __iomem *serdes;
+ void __iomem *usb_serdes;
+ void __iomem *dp_serdes = NULL;
+ const struct qmp_phy_combo_cfg *combo_cfg = NULL;
+ const struct qmp_phy_cfg *cfg = NULL;
+ const struct qmp_phy_cfg *usb_cfg = NULL;
+ const struct qmp_phy_cfg *dp_cfg = NULL;
+ int num, id, expected_phys;
+ int ret;
+
+ qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
+ if (!qmp)
+ return -ENOMEM;
+
+ qmp->dev = dev;
+ dev_set_drvdata(dev, qmp);
+
+ /* Get the specific init parameters of QMP phy */
+ cfg = of_device_get_match_data(dev);
+ if (!cfg) {
+ const struct of_device_id *match;
+
+ match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev);
+ if (!match)
+ return -EINVAL;
+
+ combo_cfg = match->data;
+ if (!combo_cfg)
+ return -EINVAL;
+
+ usb_cfg = combo_cfg->usb_cfg;
+ cfg = usb_cfg; /* Setup clks and regulators */
+ }
+
+ /* per PHY serdes; usually located at base address */
+ usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(serdes))
+ return PTR_ERR(serdes);
+
+ /* per PHY dp_com; if PHY has dp_com control block */
+ if (combo_cfg || cfg->has_phy_dp_com_ctrl) {
+ qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(qmp->dp_com))
+ return PTR_ERR(qmp->dp_com);
+ }
+
+ if (combo_cfg) {
+ /* Only two serdes for combo PHY */
+ dp_serdes = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(dp_serdes))
+ return PTR_ERR(dp_serdes);
+
+ dp_cfg = combo_cfg->dp_cfg;
+ expected_phys = 2;
+ } else {
+ expected_phys = cfg->nlanes;
+ }
+
+ mutex_init(&qmp->phy_mutex);
+
+ ret = qcom_qmp_phy_clk_init(dev, cfg);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_reset_init(dev, cfg);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_vreg_init(dev, cfg);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get regulator supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ num = of_get_available_child_count(dev->of_node);
+ /* do we have a rogue child node ? */
+ if (num > expected_phys)
+ return -EINVAL;
+
+ qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
+ if (!qmp->phys)
+ return -ENOMEM;
+
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ /*
+ * Prevent runtime pm from being ON by default. Users can enable
+ * it using power/control in sysfs.
+ */
+ pm_runtime_forbid(dev);
+
+ id = 0;
+ for_each_available_child_of_node(dev->of_node, child) {
+ if (of_node_name_eq(child, "dp-phy")) {
+ cfg = dp_cfg;
+ serdes = dp_serdes;
+ } else if (of_node_name_eq(child, "usb3-phy")) {
+ cfg = usb_cfg;
+ serdes = usb_serdes;
+ }
+
+ /* Create per-lane phy */
+ ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg);
+ if (ret) {
+ dev_err(dev, "failed to create lane%d phy, %d\n",
+ id, ret);
+ goto err_node_put;
+ }
+
+ /*
+ * Register the pipe clock provided by phy.
+ * See function description to see details of this pipe clock.
+ */
+ if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) {
+ ret = phy_pipe_clk_register(qmp, child);
+ if (ret) {
+ dev_err(qmp->dev,
+ "failed to register pipe clock source\n");
+ goto err_node_put;
+ }
+ } else if (cfg->type == PHY_TYPE_DP) {
+ ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
+ if (ret) {
+ dev_err(qmp->dev,
+ "failed to register DP clock source\n");
+ goto err_node_put;
+ }
+ }
+ id++;
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (!IS_ERR(phy_provider))
+ dev_info(dev, "Registered Qcom-QMP phy\n");
+ else
+ pm_runtime_disable(dev);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+
+err_node_put:
+ pm_runtime_disable(dev);
+ of_node_put(child);
+ return ret;
+}
+
+static struct platform_driver qcom_qmp_phy_driver = {
+ .probe = qcom_qmp_phy_probe,
+ .driver = {
+ .name = "qcom-qmp-phy",
+ .pm = &qcom_qmp_phy_pm_ops,
+ .of_match_table = qcom_qmp_phy_of_match_table,
+ },
+};
+
+module_platform_driver(qcom_qmp_phy_driver);
+
+MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm QMP PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
new file mode 100644
index 000000000000..c7309e981bfb
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -0,0 +1,6350 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#include "phy-qcom-qmp.h"
+
+/* QPHY_SW_RESET bit */
+#define SW_RESET BIT(0)
+/* QPHY_POWER_DOWN_CONTROL */
+#define SW_PWRDN BIT(0)
+#define REFCLK_DRV_DSBL BIT(1)
+/* QPHY_START_CONTROL bits */
+#define SERDES_START BIT(0)
+#define PCS_START BIT(1)
+#define PLL_READY_GATE_EN BIT(3)
+/* QPHY_PCS_STATUS bit */
+#define PHYSTATUS BIT(6)
+#define PHYSTATUS_4_20 BIT(7)
+/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
+#define PCS_READY BIT(0)
+
+/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
+/* DP PHY soft reset */
+#define SW_DPPHY_RESET BIT(0)
+/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
+#define SW_DPPHY_RESET_MUX BIT(1)
+/* USB3 PHY soft reset */
+#define SW_USB3PHY_RESET BIT(2)
+/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
+#define SW_USB3PHY_RESET_MUX BIT(3)
+
+/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
+#define USB3_MODE BIT(0) /* enables USB3 mode */
+#define DP_MODE BIT(1) /* enables DP mode */
+
+/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
+#define ARCVR_DTCT_EN BIT(0)
+#define ALFPS_DTCT_EN BIT(1)
+#define ARCVR_DTCT_EVENT_SEL BIT(4)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
+#define IRQ_CLEAR BIT(0)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
+#define RCVR_DETECT BIT(0)
+
+/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
+#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
+
+#define PHY_INIT_COMPLETE_TIMEOUT 10000
+#define POWER_DOWN_DELAY_US_MIN 10
+#define POWER_DOWN_DELAY_US_MAX 11
+
+#define MAX_PROP_NAME 32
+
+/* Define the assumed distance between lanes for underspecified device trees. */
+#define QMP_PHY_LEGACY_LANE_STRIDE 0x400
+
+struct qmp_phy_init_tbl {
+ unsigned int offset;
+ unsigned int val;
+ /*
+ * register part of layout ?
+ * if yes, then offset gives index in the reg-layout
+ */
+ bool in_layout;
+ /*
+ * mask of lanes for which this register is written
+ * for cases when second lane needs different values
+ */
+ u8 lane_mask;
+};
+
+#define QMP_PHY_INIT_CFG(o, v) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .lane_mask = 0xff, \
+ }
+
+#define QMP_PHY_INIT_CFG_L(o, v) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .in_layout = true, \
+ .lane_mask = 0xff, \
+ }
+
+#define QMP_PHY_INIT_CFG_LANE(o, v, l) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .lane_mask = l, \
+ }
+
+/* set of registers with offsets different per-PHY */
+enum qphy_reg_layout {
+ /* Common block control registers */
+ QPHY_COM_SW_RESET,
+ QPHY_COM_POWER_DOWN_CONTROL,
+ QPHY_COM_START_CONTROL,
+ QPHY_COM_PCS_READY_STATUS,
+ /* PCS registers */
+ QPHY_PLL_LOCK_CHK_DLY_TIME,
+ QPHY_FLL_CNTRL1,
+ QPHY_FLL_CNTRL2,
+ QPHY_FLL_CNT_VAL_L,
+ QPHY_FLL_CNT_VAL_H_TOL,
+ QPHY_FLL_MAN_CODE,
+ QPHY_SW_RESET,
+ QPHY_START_CTRL,
+ QPHY_PCS_READY_STATUS,
+ QPHY_PCS_STATUS,
+ QPHY_PCS_AUTONOMOUS_MODE_CTRL,
+ QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
+ QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
+ QPHY_PCS_POWER_DOWN_CONTROL,
+ /* PCS_MISC registers */
+ QPHY_PCS_MISC_TYPEC_CTRL,
+ /* Keep last to ensure regs_layout arrays are properly initialized */
+ QPHY_LAYOUT_SIZE
+};
+
+static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
+static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+};
+
+static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_COM_SW_RESET] = 0x400,
+ [QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
+ [QPHY_COM_START_CONTROL] = 0x408,
+ [QPHY_COM_PCS_READY_STATUS] = 0x448,
+ [QPHY_PLL_LOCK_CHK_DLY_TIME] = 0xa8,
+ [QPHY_FLL_CNTRL1] = 0xc4,
+ [QPHY_FLL_CNTRL2] = 0xc8,
+ [QPHY_FLL_CNT_VAL_L] = 0xcc,
+ [QPHY_FLL_CNT_VAL_H_TOL] = 0xd0,
+ [QPHY_FLL_MAN_CODE] = 0xd4,
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+};
+
+static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_FLL_CNTRL1] = 0xc0,
+ [QPHY_FLL_CNTRL2] = 0xc4,
+ [QPHY_FLL_CNT_VAL_L] = 0xc8,
+ [QPHY_FLL_CNT_VAL_H_TOL] = 0xcc,
+ [QPHY_FLL_MAN_CODE] = 0xd0,
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x17c,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
+};
+
+static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
+};
+
+static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x174,
+};
+
+static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_STATUS] = 0x2ac,
+};
+
+static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
+};
+
+static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
+};
+
+static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x1008,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
+};
+
+static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
+ [QPHY_START_CTRL] = 0x08,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
+ [QPHY_PCS_STATUS] = 0x174,
+ [QPHY_PCS_MISC_TYPEC_CTRL] = 0x00,
+};
+
+static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x160,
+};
+
+static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
+static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+};
+
+static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = QPHY_V4_PCS_UFS_PHY_START,
+ [QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_UFS_READY_STATUS,
+ [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET,
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ /* PLL and Loop filter settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ /* SSC settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c),
+ QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+
+ QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05),
+
+ QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05),
+ QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04),
+ /* PLL and Loop filter settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ /* SSC settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42),
+ QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x29),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x53),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x61),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_EQ_CONFIG5, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+ QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
+ QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_POST, 0x58),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
+ QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
+ QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
+ QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
+ QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
+ QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x007),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_01, 0x59),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xbb),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG4, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2, 0x52),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4, 0x1a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5, 0x06),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SYSCLK_EN_SEL, 0x27),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BIAS_EN_CKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_ENABLE1, 0xb0),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE0, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_RESTRIM_CTRL2, 0x05),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VCO_TUNE_MAP, 0x10),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_SELECT, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_HSCLK_SEL1, 0x30),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORE_CLK_EN, 0x73),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SVS_MODE_CLK_SEL, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV1, 0x22),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV2, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BGV_TRIM, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BG_CTRL, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL0, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_TAP_EN, 0x0d),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TX_BAND_MODE, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_LANE_MODE, 0x1a),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PARALLEL_RATE, 0x2f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE0, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE1, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE2, 0x1b),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE2, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE0, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE1, 0x31),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE2, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_THRESH_DFE, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CGA_THRESH_DFE, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXENGINE_EN0, 0x12),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_TRAIN_TIME, 0x25),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_DFE_OVRLP_TIME, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_REFRESH_TIME, 0x05),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_ENABLE_TIME, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_GAIN, 0x26),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_GAIN, 0x12),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_OFFSET_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PRE_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_INTVAL, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EDAC_INITVAL, 0x28),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB0, 0x7f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB1, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RCVRDONE_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_CTRL, 0x70),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE0, 0x8b),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE2, 0x0a),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE2, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_BAND, 0x02),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE0, 0x5c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE1, 0x3e),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE2, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_ENABLES, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_CNTRL, 0xa0),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_DEGLITCH_CNTRL, 0x08),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DCC_GAIN, 0x01),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_EN_SIGNAL, 0xc3),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PSM_RX_EN_CAL, 0x00),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_MISC_CNTRL0, 0xbc),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TS0_TIMER, 0x7f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DLL_HIGHDATARATE, 0x15),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RESETCODE_OFFSET, 0x04),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_INITVAL, 0x20),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RSM_START, 0x01),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_rx_tbl[] = {
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG, 0x3f),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_PCS_TX_RX_CONFIG, 0x50),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M3P5DB, 0x19),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M3P5DB, 0x07),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M6DB, 0x17),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M6DB, 0x09),
+ QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG5, 0x9f),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x50),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb5),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4c),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x64),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x0F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x1E),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5B),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0D),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5B),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_RX_PWM_GEAR_BAND, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_DRV_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),
+ QMP_PHY_INIT_CFG(QPHY_RX_SYM_RESYNC_CTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_POST_EMP_LVL, 0x12),
+ QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_POST_EMP_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL2, 0x6e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SYM_RESYNC_CTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL1, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_MIN_HIBERN8_TIME, 0x9a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
+
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x94),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x5),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x6e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x39),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x39),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x01),
+};
+
+static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x35),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x12),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P6_P7_PRE, 0x33),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_EQ_CONFIG2, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x05),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG2, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x08),
+};
+
+static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x26),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x048),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x46),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_CFG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x50),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MISC1, 0x88),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTERNAL_DIG_CORECLK_DIV, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MODE, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_DC_LEVEL_CTRL, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x56),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x22),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_3, 0x13),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_VMODE_CTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_PI_QEC_CTRL, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_FO_GAIN_RATE2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_3, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_VGA_CAL_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x27),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B0, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B1, 0xf9),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B3, 0xce),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B4, 0x62),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B0, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B3, 0xcf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B4, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_PHPRE_CTRL, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_MARG_COARSE_CTRL2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG2, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG4, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG5, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_EQ_CONFIG1, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G3_RXEQEVAL_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_RXEQEVAL_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG2, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0b),
+};
+
+static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x65),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xf5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf1),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xed),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x3c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xb7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0xb7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_INITVAL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x01),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_EQ_CONFIG2, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x46),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_CFG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0xd0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MISC1, 0x88),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_DC_LEVEL_CTRL, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xcc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xcc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x29),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0xc5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xad),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xb6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xc7),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xef),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x05),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
+
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
+};
+
+/* Register names should be validated, they might be different for this PHY */
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_EQ_CONFIG1, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3, 0x28),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
+};
+
+struct qmp_phy;
+
+/* struct qmp_phy_cfg - per-PHY initialization config */
+struct qmp_phy_cfg {
+ /* phy-type - PCIE/UFS/USB */
+ unsigned int type;
+ /* number of lanes provided by phy */
+ int nlanes;
+
+ /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
+ const struct qmp_phy_init_tbl *serdes_tbl;
+ int serdes_tbl_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_sec;
+ int serdes_tbl_num_sec;
+ const struct qmp_phy_init_tbl *tx_tbl;
+ int tx_tbl_num;
+ const struct qmp_phy_init_tbl *tx_tbl_sec;
+ int tx_tbl_num_sec;
+ const struct qmp_phy_init_tbl *rx_tbl;
+ int rx_tbl_num;
+ const struct qmp_phy_init_tbl *rx_tbl_sec;
+ int rx_tbl_num_sec;
+ const struct qmp_phy_init_tbl *pcs_tbl;
+ int pcs_tbl_num;
+ const struct qmp_phy_init_tbl *pcs_tbl_sec;
+ int pcs_tbl_num_sec;
+ const struct qmp_phy_init_tbl *pcs_misc_tbl;
+ int pcs_misc_tbl_num;
+ const struct qmp_phy_init_tbl *pcs_misc_tbl_sec;
+ int pcs_misc_tbl_num_sec;
+
+ /* Init sequence for DP PHY block link rates */
+ const struct qmp_phy_init_tbl *serdes_tbl_rbr;
+ int serdes_tbl_rbr_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr;
+ int serdes_tbl_hbr_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr2;
+ int serdes_tbl_hbr2_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
+ int serdes_tbl_hbr3_num;
+
+ /* DP PHY callbacks */
+ int (*configure_dp_phy)(struct qmp_phy *qphy);
+ void (*configure_dp_tx)(struct qmp_phy *qphy);
+ int (*calibrate_dp_phy)(struct qmp_phy *qphy);
+ void (*dp_aux_init)(struct qmp_phy *qphy);
+
+ /* clock ids to be requested */
+ const char * const *clk_list;
+ int num_clks;
+ /* resets to be requested */
+ const char * const *reset_list;
+ int num_resets;
+ /* regulators to be requested */
+ const char * const *vreg_list;
+ int num_vregs;
+
+ /* array of registers with different offsets */
+ const unsigned int *regs;
+
+ unsigned int start_ctrl;
+ unsigned int pwrdn_ctrl;
+ unsigned int mask_com_pcs_ready;
+ /* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
+ unsigned int phy_status;
+
+ /* true, if PHY has a separate PHY_COM control block */
+ bool has_phy_com_ctrl;
+ /* true, if PHY has a reset for individual lanes */
+ bool has_lane_rst;
+ /* true, if PHY needs delay after POWER_DOWN */
+ bool has_pwrdn_delay;
+ /* power_down delay in usec */
+ int pwrdn_delay_min;
+ int pwrdn_delay_max;
+
+ /* true, if PHY has a separate DP_COM control block */
+ bool has_phy_dp_com_ctrl;
+ /* true, if PHY has secondary tx/rx lanes to be configured */
+ bool is_dual_lane_phy;
+
+ /* true, if PCS block has no separate SW_RESET register */
+ bool no_pcs_sw_reset;
+};
+
+struct qmp_phy_combo_cfg {
+ const struct qmp_phy_cfg *usb_cfg;
+ const struct qmp_phy_cfg *dp_cfg;
+};
+
+/**
+ * struct qmp_phy - per-lane phy descriptor
+ *
+ * @phy: generic phy
+ * @cfg: phy specific configuration
+ * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
+ * @tx: iomapped memory space for lane's tx
+ * @rx: iomapped memory space for lane's rx
+ * @pcs: iomapped memory space for lane's pcs
+ * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
+ * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
+ * @pcs_misc: iomapped memory space for lane's pcs_misc
+ * @pipe_clk: pipe clock
+ * @index: lane index
+ * @qmp: QMP phy to which this lane belongs
+ * @lane_rst: lane's reset controller
+ * @mode: current PHY mode
+ * @dp_aux_cfg: Display port aux config
+ * @dp_opts: Display port optional config
+ * @dp_clks: Display port clocks
+ */
+struct qmp_phy {
+ struct phy *phy;
+ const struct qmp_phy_cfg *cfg;
+ void __iomem *serdes;
+ void __iomem *tx;
+ void __iomem *rx;
+ void __iomem *pcs;
+ void __iomem *tx2;
+ void __iomem *rx2;
+ void __iomem *pcs_misc;
+ struct clk *pipe_clk;
+ unsigned int index;
+ struct qcom_qmp *qmp;
+ struct reset_control *lane_rst;
+ enum phy_mode mode;
+ unsigned int dp_aux_cfg;
+ struct phy_configure_opts_dp dp_opts;
+ struct qmp_phy_dp_clks *dp_clks;
+};
+
+struct qmp_phy_dp_clks {
+ struct qmp_phy *qphy;
+ struct clk_hw dp_link_hw;
+ struct clk_hw dp_pixel_hw;
+};
+
+/**
+ * struct qcom_qmp - structure holding QMP phy block attributes
+ *
+ * @dev: device
+ * @dp_com: iomapped memory space for phy's dp_com control block
+ *
+ * @clks: array of clocks required by phy
+ * @resets: array of resets required by phy
+ * @vregs: regulator supplies bulk data
+ *
+ * @phys: array of per-lane phy descriptors
+ * @phy_mutex: mutex lock for PHY common block initialization
+ * @init_count: phy common block initialization count
+ * @ufs_reset: optional UFS PHY reset handle
+ */
+struct qcom_qmp {
+ struct device *dev;
+ void __iomem *dp_com;
+
+ struct clk_bulk_data *clks;
+ struct reset_control **resets;
+ struct regulator_bulk_data *vregs;
+
+ struct qmp_phy **phys;
+
+ struct mutex phy_mutex;
+ int init_count;
+
+ struct reset_control *ufs_reset;
+};
+
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
+
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
+
+static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg |= val;
+ writel(reg, base + offset);
+
+ /* ensure that above write is through */
+ readl(base + offset);
+}
+
+static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg &= ~val;
+ writel(reg, base + offset);
+
+ /* ensure that above write is through */
+ readl(base + offset);
+}
+
+/* list of clocks required by phy */
+static const char * const msm8996_phy_clk_l[] = {
+ "aux", "cfg_ahb", "ref",
+};
+
+static const char * const msm8996_ufs_phy_clk_l[] = {
+ "ref",
+};
+
+static const char * const qmp_v3_phy_clk_l[] = {
+ "aux", "cfg_ahb", "ref", "com_aux",
+};
+
+static const char * const sdm845_pciephy_clk_l[] = {
+ "aux", "cfg_ahb", "ref", "refgen",
+};
+
+static const char * const qmp_v4_phy_clk_l[] = {
+ "aux", "ref_clk_src", "ref", "com_aux",
+};
+
+/* the primary usb3 phy on sm8250 doesn't have a ref clock */
+static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
+ "aux", "ref_clk_src", "com_aux"
+};
+
+static const char * const sm8450_ufs_phy_clk_l[] = {
+ "qref", "ref", "ref_aux",
+};
+
+static const char * const sdm845_ufs_phy_clk_l[] = {
+ "ref", "ref_aux",
+};
+
+/* usb3 phy on sdx55 doesn't have com_aux clock */
+static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
+ "aux", "cfg_ahb", "ref"
+};
+
+static const char * const qcm2290_usb3phy_clk_l[] = {
+ "cfg_ahb", "ref", "com_aux",
+};
+
+/* list of resets */
+static const char * const msm8996_pciephy_reset_l[] = {
+ "phy", "common", "cfg",
+};
+
+static const char * const msm8996_usb3phy_reset_l[] = {
+ "phy", "common",
+};
+
+static const char * const sc7180_usb3phy_reset_l[] = {
+ "phy",
+};
+
+static const char * const qcm2290_usb3phy_reset_l[] = {
+ "phy_phy", "phy",
+};
+
+static const char * const sdm845_pciephy_reset_l[] = {
+ "phy",
+};
+
+/* list of regulators */
+static const char * const qmp_phy_vreg_l[] = {
+ "vdda-phy", "vdda-pll",
+};
+
+static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
+ .tx_tbl = msm8996_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
+ .rx_tbl = ipq8074_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_usb3_rx_tbl),
+ .pcs_tbl = ipq8074_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+};
+
+static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 3,
+
+ .serdes_tbl = msm8996_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl),
+ .tx_tbl = msm8996_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl),
+ .rx_tbl = msm8996_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl),
+ .pcs_tbl = msm8996_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | PLL_READY_GATE_EN,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .mask_com_pcs_ready = PCS_READY,
+ .phy_status = PHYSTATUS,
+
+ .has_phy_com_ctrl = true,
+ .has_lane_rst = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg msm8996_ufs_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8996_ufs_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes_tbl),
+ .tx_tbl = msm8996_ufs_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx_tbl),
+ .rx_tbl = msm8996_ufs_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx_tbl),
+
+ .clk_list = msm8996_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l),
+
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+
+ .regs = msm8996_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8996_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl),
+ .tx_tbl = msm8996_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
+ .rx_tbl = msm8996_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_usb3_rx_tbl),
+ .pcs_tbl = msm8996_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8996_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+};
+
+static const char * const ipq8074_pciephy_clk_l[] = {
+ "aux", "cfg_ahb",
+};
+/* list of resets */
+static const char * const ipq8074_pciephy_reset_l[] = {
+ "phy", "common",
+};
+
+static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
+ .tx_tbl = ipq8074_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_tx_tbl),
+ .rx_tbl = ipq8074_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
+ .pcs_tbl = ipq8074_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq6018_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
+ .tx_tbl = ipq6018_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq6018_pcie_tx_tbl),
+ .rx_tbl = ipq6018_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
+ .pcs_tbl = ipq6018_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = ipq_pciephy_gen3_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sdm845_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_serdes_tbl),
+ .tx_tbl = sdm845_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_tx_tbl),
+ .rx_tbl = sdm845_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_rx_tbl),
+ .pcs_tbl = sdm845_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sdm845_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_qmp_pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sdm845_qhp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_serdes_tbl),
+ .tx_tbl = sdm845_qhp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_tx_tbl),
+ .rx_tbl = sdm845_qhp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_rx_tbl),
+ .pcs_tbl = sdm845_qhp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_pcs_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_qhp_pciephy_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
+ .serdes_tbl_sec = sm8250_qmp_gen3x1_pcie_serdes_tbl,
+ .serdes_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_serdes_tbl),
+ .tx_tbl = sm8250_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
+ .rx_tbl = sm8250_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
+ .rx_tbl_sec = sm8250_qmp_gen3x1_pcie_rx_tbl,
+ .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_rx_tbl),
+ .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
+ .pcs_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_tbl,
+ .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
+ .pcs_misc_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
+ .tx_tbl = sm8250_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
+ .tx_tbl_sec = sm8250_qmp_gen3x2_pcie_tx_tbl,
+ .tx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_tx_tbl),
+ .rx_tbl = sm8250_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
+ .rx_tbl_sec = sm8250_qmp_gen3x2_pcie_rx_tbl,
+ .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_rx_tbl),
+ .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
+ .pcs_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_tbl,
+ .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
+ .pcs_misc_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .tx_tbl = qmp_v3_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
+ .usb_cfg = &sc7180_usb3phy_cfg,
+ .dp_cfg = &sc7180_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sdm845_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
+ .tx_tbl = sdm845_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
+ .rx_tbl = sdm845_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
+ .pcs_tbl = sdm845_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sdm845_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 1,
+
+ .serdes_tbl = sm6115_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
+ .tx_tbl = sm6115_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
+ .rx_tbl = sm6115_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
+ .pcs_tbl = sm6115_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm6115_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .is_dual_lane_phy = false,
+ .no_pcs_sw_reset = true,
+};
+
+static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8998_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl),
+ .tx_tbl = msm8998_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8998_pcie_tx_tbl),
+ .rx_tbl = msm8998_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8998_pcie_rx_tbl),
+ .pcs_tbl = msm8998_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+};
+
+static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8998_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
+ .tx_tbl = msm8998_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8998_usb3_tx_tbl),
+ .rx_tbl = msm8998_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
+ .pcs_tbl = msm8998_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8150_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
+ .tx_tbl = sm8150_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
+ .rx_tbl = sm8150_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
+ .pcs_tbl = sm8150_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8150_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_tx_tbl),
+ .rx_tbl = sm8150_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
+ .pcs_tbl = sm8150_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sc8180x_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_serdes_tbl),
+ .tx_tbl = sc8180x_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl),
+ .rx_tbl = sc8180x_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_rx_tbl),
+ .pcs_tbl = sc8180x_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sc8180x_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .tx_tbl = qmp_v4_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
+ .usb_cfg = &sm8150_usb3phy_cfg,
+ .dp_cfg = &sc8180x_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8150_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8150_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8250_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_tx_tbl),
+ .rx_tbl = sm8250_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
+ .pcs_tbl = sm8250_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8250_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8250_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .tx_tbl = qmp_v4_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
+ .usb_cfg = &sm8250_usb3phy_cfg,
+ .dp_cfg = &sm8250_dpphy_cfg,
+};
+
+static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sdx55_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_tx_tbl),
+ .rx_tbl = sdx55_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_sdx55_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sdx55_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_serdes_tbl),
+ .tx_tbl = sdx55_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_tx_tbl),
+ .rx_tbl = sdx55_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_rx_tbl),
+ .pcs_tbl = sdx55_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sdx55_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS_4_20,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sdx65_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_tx_tbl),
+ .rx_tbl = sdx65_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_sdx55_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8350_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8350_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+ .tx_tbl = sm8350_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+ .rx_tbl = sm8350_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+ .pcs_tbl = sm8350_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8350_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_tx_tbl),
+ .rx_tbl = sm8350_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl),
+ .pcs_tbl = sm8350_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl),
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8350_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8350_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8350_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8350_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+ .tx_tbl = sm8350_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+ .rx_tbl = sm8350_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+ .pcs_tbl = sm8350_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .clk_list = sm8450_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8450_qmp_gen3x1_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl),
+ .tx_tbl = sm8450_qmp_gen3x1_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl),
+ .rx_tbl = sm8450_qmp_gen3x1_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl),
+ .pcs_tbl = sm8450_qmp_gen3x1_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8450_qmp_gen4x2_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_serdes_tbl),
+ .tx_tbl = sm8450_qmp_gen4x2_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_tx_tbl),
+ .rx_tbl = sm8450_qmp_gen4x2_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_rx_tbl),
+ .pcs_tbl = sm8450_qmp_gen4x2_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_tbl),
+ .pcs_misc_tbl = sm8450_qmp_gen4x2_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS_4_20,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qcm2290_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
+ .tx_tbl = qcm2290_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qcm2290_usb3_tx_tbl),
+ .rx_tbl = qcm2290_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qcm2290_usb3_rx_tbl),
+ .pcs_tbl = qcm2290_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
+ .clk_list = qcm2290_usb3phy_clk_l,
+ .num_clks = ARRAY_SIZE(qcm2290_usb3phy_clk_l),
+ .reset_list = qcm2290_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qcm2290_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
+static void qcom_qmp_phy_configure_lane(void __iomem *base,
+ const unsigned int *regs,
+ const struct qmp_phy_init_tbl tbl[],
+ int num,
+ u8 lane_mask)
+{
+ int i;
+ const struct qmp_phy_init_tbl *t = tbl;
+
+ if (!t)
+ return;
+
+ for (i = 0; i < num; i++, t++) {
+ if (!(t->lane_mask & lane_mask))
+ continue;
+
+ if (t->in_layout)
+ writel(t->val, base + regs[t->offset]);
+ else
+ writel(t->val, base + t->offset);
+ }
+}
+
+static void qcom_qmp_phy_configure(void __iomem *base,
+ const unsigned int *regs,
+ const struct qmp_phy_init_tbl tbl[],
+ int num)
+{
+ qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff);
+}
+
+static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
+ int serdes_tbl_num = cfg->serdes_tbl_num;
+ int ret;
+
+ qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
+ if (cfg->serdes_tbl_sec)
+ qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
+ cfg->serdes_tbl_num_sec);
+
+ if (cfg->type == PHY_TYPE_DP) {
+ switch (dp_opts->link_rate) {
+ case 1620:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_rbr,
+ cfg->serdes_tbl_rbr_num);
+ break;
+ case 2700:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr,
+ cfg->serdes_tbl_hbr_num);
+ break;
+ case 5400:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr2,
+ cfg->serdes_tbl_hbr2_num);
+ break;
+ case 8100:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr3,
+ cfg->serdes_tbl_hbr3_num);
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ }
+
+
+ if (cfg->has_phy_com_ctrl) {
+ void __iomem *status;
+ unsigned int mask, val;
+
+ qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+ SERDES_START | PCS_START);
+
+ status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
+ mask = cfg->mask_com_pcs_ready;
+
+ ret = readl_poll_timeout(status, val, (val & mask), 10,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev,
+ "phy common block init timed-out\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
+{
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ /* Turn on BIAS current for PHY/PLL */
+ writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
+ QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
+ qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN |
+ DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
+ DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(QSERDES_V3_COM_BIAS_EN |
+ QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
+ QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
+ QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
+ qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0x24, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xbb, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qphy->dp_aux_cfg = 0;
+
+ writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+ PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+ PHY_AUX_REQ_ERR_MASK,
+ qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
+}
+
+static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
+ { 0x00, 0x0c, 0x15, 0x1a },
+ { 0x02, 0x0e, 0x16, 0xff },
+ { 0x02, 0x11, 0xff, 0xff },
+ { 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
+ { 0x02, 0x12, 0x16, 0x1a },
+ { 0x09, 0x19, 0x1f, 0xff },
+ { 0x10, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
+ { 0x00, 0x0c, 0x14, 0x19 },
+ { 0x00, 0x0b, 0x12, 0xff },
+ { 0x00, 0x0b, 0xff, 0xff },
+ { 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
+ { 0x08, 0x0f, 0x16, 0x1f },
+ { 0x11, 0x1e, 0x1f, 0xff },
+ { 0x19, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
+ unsigned int drv_lvl_reg, unsigned int emp_post_reg)
+{
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ unsigned int v_level = 0, p_level = 0;
+ u8 voltage_swing_cfg, pre_emphasis_cfg;
+ int i;
+
+ for (i = 0; i < dp_opts->lanes; i++) {
+ v_level = max(v_level, dp_opts->voltage[i]);
+ p_level = max(p_level, dp_opts->pre[i]);
+ }
+
+ if (dp_opts->link_rate <= 2700) {
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
+ } else {
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
+ }
+
+ /* TODO: Move check to config check */
+ if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
+ return -EINVAL;
+
+ /* Enable MUX to use Cursor values from these registers */
+ voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
+ pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
+
+ writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
+ writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
+
+ return 0;
+}
+
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
+{
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 bias_en, drvr_en;
+
+ if (qcom_qmp_phy_configure_dp_swing(qphy,
+ QSERDES_V3_TX_TX_DRV_LVL,
+ QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
+ return;
+
+ if (dp_opts->lanes == 1) {
+ bias_en = 0x3e;
+ drvr_en = 0x13;
+ } else {
+ bias_en = 0x3f;
+ drvr_en = 0x10;
+ }
+
+ writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+}
+
+static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy)
+{
+ u32 val;
+ bool reverse = false;
+
+ val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
+
+ /*
+ * TODO: Assume orientation is CC1 for now and two lanes, need to
+ * use type-c connector to understand orientation and lanes.
+ *
+ * Otherwise val changes to be like below if this code understood
+ * the orientation of the type-c cable.
+ *
+ * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
+ * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
+ * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
+ * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
+ * if (orientation == ORIENTATION_CC2)
+ * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
+ */
+ val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
+ writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
+
+ return reverse;
+}
+
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 phy_vco_div, status;
+ unsigned long pixel_freq;
+
+ qcom_qmp_phy_configure_dp_mode(qphy);
+
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ phy_vco_div = 0x1;
+ pixel_freq = 1620000000UL / 2;
+ break;
+ case 2700:
+ phy_vco_div = 0x1;
+ pixel_freq = 2700000000UL / 2;
+ break;
+ case 5400:
+ phy_vco_div = 0x2;
+ pixel_freq = 5400000000UL / 4;
+ break;
+ case 8100:
+ phy_vco_div = 0x0;
+ pixel_freq = 8100000000UL / 6;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
+
+ clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
+ clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
+
+ writel(0x04, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ udelay(2000);
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000);
+}
+
+/*
+ * We need to calibrate the aux setting here as many times
+ * as the caller tries
+ */
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
+{
+ static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
+ u8 val;
+
+ qphy->dp_aux_cfg++;
+ qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qphy->dp_aux_cfg];
+
+ writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+
+ return 0;
+}
+
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
+{
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ /* Turn on BIAS current for PHY/PLL */
+ writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qphy->dp_aux_cfg = 0;
+
+ writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+ PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+ PHY_AUX_REQ_ERR_MASK,
+ qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
+}
+
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
+{
+ /* Program default values before writing proper values */
+ writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+
+ writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+
+ qcom_qmp_phy_configure_dp_swing(qphy,
+ QSERDES_V4_TX_TX_DRV_LVL,
+ QSERDES_V4_TX_TX_EMP_POST1_LVL);
+}
+
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 phy_vco_div, status;
+ unsigned long pixel_freq;
+ u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
+ bool reverse;
+
+ writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
+
+ reverse = qcom_qmp_phy_configure_dp_mode(qphy);
+
+ writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+
+ writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ phy_vco_div = 0x1;
+ pixel_freq = 1620000000UL / 2;
+ break;
+ case 2700:
+ phy_vco_div = 0x1;
+ pixel_freq = 2700000000UL / 2;
+ break;
+ case 5400:
+ phy_vco_div = 0x2;
+ pixel_freq = 5400000000UL / 4;
+ break;
+ case 8100:
+ phy_vco_div = 0x0;
+ pixel_freq = 8100000000UL / 6;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
+
+ clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
+ clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
+
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ /*
+ * At least for 7nm DP PHY this has to be done after enabling link
+ * clock.
+ */
+
+ if (dp_opts->lanes == 1) {
+ bias0_en = reverse ? 0x3e : 0x15;
+ bias1_en = reverse ? 0x15 : 0x3e;
+ drvr0_en = reverse ? 0x13 : 0x10;
+ drvr1_en = reverse ? 0x10 : 0x13;
+ } else if (dp_opts->lanes == 2) {
+ bias0_en = reverse ? 0x3f : 0x15;
+ bias1_en = reverse ? 0x15 : 0x3f;
+ drvr0_en = 0x10;
+ drvr1_en = 0x10;
+ } else {
+ bias0_en = 0x3f;
+ bias1_en = 0x3f;
+ drvr0_en = 0x10;
+ drvr1_en = 0x10;
+ }
+
+ writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+
+ writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ udelay(2000);
+ writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
+
+ writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+
+ writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+
+ return 0;
+}
+
+/*
+ * We need to calibrate the aux setting here as many times
+ * as the caller tries
+ */
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
+{
+ static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
+ u8 val;
+
+ qphy->dp_aux_cfg++;
+ qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qphy->dp_aux_cfg];
+
+ writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+
+ return 0;
+}
+
+static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ const struct phy_configure_opts_dp *dp_opts = &opts->dp;
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
+ if (qphy->dp_opts.set_voltages) {
+ cfg->configure_dp_tx(qphy);
+ qphy->dp_opts.set_voltages = 0;
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ if (cfg->calibrate_dp_phy)
+ return cfg->calibrate_dp_phy(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *dp_com = qmp->dp_com;
+ int ret, i;
+
+ mutex_lock(&qmp->phy_mutex);
+ if (qmp->init_count++) {
+ mutex_unlock(&qmp->phy_mutex);
+ return 0;
+ }
+
+ /* turn on regulator supplies */
+ ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
+ if (ret) {
+ dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
+ goto err_unlock;
+ }
+
+ for (i = 0; i < cfg->num_resets; i++) {
+ ret = reset_control_assert(qmp->resets[i]);
+ if (ret) {
+ dev_err(qmp->dev, "%s reset assert failed\n",
+ cfg->reset_list[i]);
+ goto err_disable_regulators;
+ }
+ }
+
+ for (i = cfg->num_resets - 1; i >= 0; i--) {
+ ret = reset_control_deassert(qmp->resets[i]);
+ if (ret) {
+ dev_err(qmp->dev, "%s reset deassert failed\n",
+ qphy->cfg->reset_list[i]);
+ goto err_assert_reset;
+ }
+ }
+
+ ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ if (ret)
+ goto err_assert_reset;
+
+ if (cfg->has_phy_dp_com_ctrl) {
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
+ SW_PWRDN);
+ /* override hardware control for reset of qmp phy */
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+ SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+ SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+ /* Default type-c orientation, i.e CC1 */
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
+
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
+ USB3_MODE | DP_MODE);
+
+ /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+ SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+ SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
+ }
+
+ if (cfg->has_phy_com_ctrl) {
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
+ SW_PWRDN);
+ } else {
+ if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
+ qphy_setbits(pcs,
+ cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);
+ else
+ qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL,
+ cfg->pwrdn_ctrl);
+ }
+
+ mutex_unlock(&qmp->phy_mutex);
+
+ return 0;
+
+err_assert_reset:
+ while (++i < cfg->num_resets)
+ reset_control_assert(qmp->resets[i]);
+err_disable_regulators:
+ regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+err_unlock:
+ mutex_unlock(&qmp->phy_mutex);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ int i = cfg->num_resets;
+
+ mutex_lock(&qmp->phy_mutex);
+ if (--qmp->init_count) {
+ mutex_unlock(&qmp->phy_mutex);
+ return 0;
+ }
+
+ reset_control_assert(qmp->ufs_reset);
+ if (cfg->has_phy_com_ctrl) {
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+ SERDES_START | PCS_START);
+ qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET],
+ SW_RESET);
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
+ SW_PWRDN);
+ }
+
+ while (--i >= 0)
+ reset_control_assert(qmp->resets[i]);
+
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+ regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+
+ mutex_unlock(&qmp->phy_mutex);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_init(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ int ret;
+ dev_vdbg(qmp->dev, "Initializing QMP phy\n");
+
+ if (cfg->no_pcs_sw_reset) {
+ /*
+ * Get UFS reset, which is delayed until now to avoid a
+ * circular dependency where UFS needs its PHY, but the PHY
+ * needs this UFS reset.
+ */
+ if (!qmp->ufs_reset) {
+ qmp->ufs_reset =
+ devm_reset_control_get_exclusive(qmp->dev,
+ "ufsphy");
+
+ if (IS_ERR(qmp->ufs_reset)) {
+ ret = PTR_ERR(qmp->ufs_reset);
+ dev_err(qmp->dev,
+ "failed to get UFS reset: %d\n",
+ ret);
+
+ qmp->ufs_reset = NULL;
+ return ret;
+ }
+ }
+
+ ret = reset_control_assert(qmp->ufs_reset);
+ if (ret)
+ return ret;
+ }
+
+ ret = qcom_qmp_phy_com_init(qphy);
+ if (ret)
+ return ret;
+
+ if (cfg->type == PHY_TYPE_DP)
+ cfg->dp_aux_init(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_power_on(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *tx = qphy->tx;
+ void __iomem *rx = qphy->rx;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+ void __iomem *status;
+ unsigned int mask, val, ready;
+ int ret;
+
+ qcom_qmp_phy_serdes_init(qphy);
+
+ if (cfg->has_lane_rst) {
+ ret = reset_control_deassert(qphy->lane_rst);
+ if (ret) {
+ dev_err(qmp->dev, "lane%d reset deassert failed\n",
+ qphy->index);
+ return ret;
+ }
+ }
+
+ ret = clk_prepare_enable(qphy->pipe_clk);
+ if (ret) {
+ dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
+ goto err_reset_lane;
+ }
+
+ /* Tx, Rx, and PCS configurations */
+ qcom_qmp_phy_configure_lane(tx, cfg->regs,
+ cfg->tx_tbl, cfg->tx_tbl_num, 1);
+ if (cfg->tx_tbl_sec)
+ qcom_qmp_phy_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
+ cfg->tx_tbl_num_sec, 1);
+
+ /* Configuration for other LANE for USB-DP combo PHY */
+ if (cfg->is_dual_lane_phy) {
+ qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
+ cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ if (cfg->tx_tbl_sec)
+ qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
+ cfg->tx_tbl_sec,
+ cfg->tx_tbl_num_sec, 2);
+ }
+
+ /* Configure special DP tx tunings */
+ if (cfg->type == PHY_TYPE_DP)
+ cfg->configure_dp_tx(qphy);
+
+ qcom_qmp_phy_configure_lane(rx, cfg->regs,
+ cfg->rx_tbl, cfg->rx_tbl_num, 1);
+ if (cfg->rx_tbl_sec)
+ qcom_qmp_phy_configure_lane(rx, cfg->regs,
+ cfg->rx_tbl_sec, cfg->rx_tbl_num_sec, 1);
+
+ if (cfg->is_dual_lane_phy) {
+ qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
+ cfg->rx_tbl, cfg->rx_tbl_num, 2);
+ if (cfg->rx_tbl_sec)
+ qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
+ cfg->rx_tbl_sec,
+ cfg->rx_tbl_num_sec, 2);
+ }
+
+ /* Configure link rate, swing, etc. */
+ if (cfg->type == PHY_TYPE_DP) {
+ cfg->configure_dp_phy(qphy);
+ } else {
+ qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+ if (cfg->pcs_tbl_sec)
+ qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
+ cfg->pcs_tbl_num_sec);
+ }
+
+ ret = reset_control_deassert(qmp->ufs_reset);
+ if (ret)
+ goto err_disable_pipe_clk;
+
+ qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
+ cfg->pcs_misc_tbl_num);
+ if (cfg->pcs_misc_tbl_sec)
+ qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
+ cfg->pcs_misc_tbl_num_sec);
+
+ /*
+ * Pull out PHY from POWER DOWN state.
+ * This is active low enable signal to power-down PHY.
+ */
+ if(cfg->type == PHY_TYPE_PCIE)
+ qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
+
+ if (cfg->has_pwrdn_delay)
+ usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
+
+ if (cfg->type != PHY_TYPE_DP) {
+ /* Pull PHY out of reset state */
+ if (!cfg->no_pcs_sw_reset)
+ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+ /* start SerDes and Phy-Coding-Sublayer */
+ qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+ if (cfg->type == PHY_TYPE_UFS) {
+ status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
+ mask = PCS_READY;
+ ready = PCS_READY;
+ } else {
+ status = pcs + cfg->regs[QPHY_PCS_STATUS];
+ mask = cfg->phy_status;
+ ready = 0;
+ }
+
+ ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev, "phy initialization timed-out\n");
+ goto err_disable_pipe_clk;
+ }
+ }
+ return 0;
+
+err_disable_pipe_clk:
+ clk_disable_unprepare(qphy->pipe_clk);
+err_reset_lane:
+ if (cfg->has_lane_rst)
+ reset_control_assert(qphy->lane_rst);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_power_off(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ clk_disable_unprepare(qphy->pipe_clk);
+
+ if (cfg->type == PHY_TYPE_DP) {
+ /* Assert DP PHY power down */
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ } else {
+ /* PHY reset */
+ if (!cfg->no_pcs_sw_reset)
+ qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+
+ /* stop SerDes and Phy-Coding-Sublayer */
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+ /* Put PHY into POWER DOWN state: active low */
+ if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);
+ } else {
+ qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL,
+ cfg->pwrdn_ctrl);
+ }
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_phy_exit(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ if (cfg->has_lane_rst)
+ reset_control_assert(qphy->lane_rst);
+
+ qcom_qmp_phy_com_exit(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_enable(struct phy *phy)
+{
+ int ret;
+
+ ret = qcom_qmp_phy_init(phy);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_power_on(phy);
+ if (ret)
+ qcom_qmp_phy_exit(phy);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_disable(struct phy *phy)
+{
+ int ret;
+
+ ret = qcom_qmp_phy_power_off(phy);
+ if (ret)
+ return ret;
+ return qcom_qmp_phy_exit(phy);
+}
+
+static int qcom_qmp_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+
+ qphy->mode = mode;
+
+ return 0;
+}
+
+static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+ u32 intr_mask;
+
+ if (qphy->mode == PHY_MODE_USB_HOST_SS ||
+ qphy->mode == PHY_MODE_USB_DEVICE_SS)
+ intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
+ else
+ intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
+
+ /* Clear any pending interrupts status */
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ /* Writing 1 followed by 0 clears the interrupt */
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
+
+ /* Enable required PHY autonomous mode interrupts */
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
+
+ /* Enable i/o clamp_n for autonomous mode */
+ if (pcs_misc)
+ qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
+}
+
+static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+
+ /* Disable i/o clamp_n on resume for normal mode */
+ if (pcs_misc)
+ qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
+
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
+
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ /* Writing 1 followed by 0 clears the interrupt */
+ qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+}
+
+static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_phy *qphy = qmp->phys[0];
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
+
+ /* Supported only for USB3 PHY and luckily USB3 is the first phy */
+ if (cfg->type != PHY_TYPE_USB3)
+ return 0;
+
+ if (!qmp->init_count) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ qcom_qmp_phy_enable_autonomous_mode(qphy);
+
+ clk_disable_unprepare(qphy->pipe_clk);
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+ return 0;
+}
+
+static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_phy *qphy = qmp->phys[0];
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ int ret = 0;
+
+ dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
+
+ /* Supported only for USB3 PHY and luckily USB3 is the first phy */
+ if (cfg->type != PHY_TYPE_USB3)
+ return 0;
+
+ if (!qmp->init_count) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(qphy->pipe_clk);
+ if (ret) {
+ dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
+ clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+ return ret;
+ }
+
+ qcom_qmp_phy_disable_autonomous_mode(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int num = cfg->num_vregs;
+ int i;
+
+ qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
+ if (!qmp->vregs)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++)
+ qmp->vregs[i].supply = cfg->vreg_list[i];
+
+ return devm_regulator_bulk_get(dev, num, qmp->vregs);
+}
+
+static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int i;
+
+ qmp->resets = devm_kcalloc(dev, cfg->num_resets,
+ sizeof(*qmp->resets), GFP_KERNEL);
+ if (!qmp->resets)
+ return -ENOMEM;
+
+ for (i = 0; i < cfg->num_resets; i++) {
+ struct reset_control *rst;
+ const char *name = cfg->reset_list[i];
+
+ rst = devm_reset_control_get_exclusive(dev, name);
+ if (IS_ERR(rst)) {
+ dev_err(dev, "failed to get %s reset\n", name);
+ return PTR_ERR(rst);
+ }
+ qmp->resets[i] = rst;
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ int num = cfg->num_clks;
+ int i;
+
+ qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
+ if (!qmp->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++)
+ qmp->clks[i].id = cfg->clk_list[i];
+
+ return devm_clk_bulk_get(dev, num, qmp->clks);
+}
+
+static void phy_clk_release_provider(void *res)
+{
+ of_clk_del_provider(res);
+}
+
+/*
+ * Register a fixed rate pipe clock.
+ *
+ * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
+ * controls it. The <s>_pipe_clk coming out of the GCC is requested
+ * by the PHY driver for its operations.
+ * We register the <s>_pipe_clksrc here. The gcc driver takes care
+ * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
+ * Below picture shows this relationship.
+ *
+ * +---------------+
+ * | PHY block |<<---------------------------------------+
+ * | | |
+ * | +-------+ | +-----+ |
+ * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
+ * clk | +-------+ | +-----+
+ * +---------------+
+ */
+static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
+{
+ struct clk_fixed_rate *fixed;
+ struct clk_init_data init = { };
+ int ret;
+
+ ret = of_property_read_string(np, "clock-output-names", &init.name);
+ if (ret) {
+ dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
+ return ret;
+ }
+
+ fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
+ if (!fixed)
+ return -ENOMEM;
+
+ init.ops = &clk_fixed_rate_ops;
+
+ /* controllers using QMP phys use 125MHz pipe clock interface */
+ fixed->fixed_rate = 125000000;
+ fixed->hw.init = &init;
+
+ ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
+ if (ret)
+ return ret;
+
+ /*
+ * Roll a devm action because the clock provider is the child node, but
+ * the child node is not actually a device.
+ */
+ return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
+}
+
+/*
+ * Display Port PLL driver block diagram for branch clocks
+ *
+ * +------------------------------+
+ * | DP_VCO_CLK |
+ * | |
+ * | +-------------------+ |
+ * | | (DP PLL/VCO) | |
+ * | +---------+---------+ |
+ * | v |
+ * | +----------+-----------+ |
+ * | | hsclk_divsel_clk_src | |
+ * | +----------+-----------+ |
+ * +------------------------------+
+ * |
+ * +---------<---------v------------>----------+
+ * | |
+ * +--------v----------------+ |
+ * | dp_phy_pll_link_clk | |
+ * | link_clk | |
+ * +--------+----------------+ |
+ * | |
+ * | |
+ * v v
+ * Input to DISPCC block |
+ * for link clk, crypto clk |
+ * and interface clock |
+ * |
+ * |
+ * +--------<------------+-----------------+---<---+
+ * | | |
+ * +----v---------+ +--------v-----+ +--------v------+
+ * | vco_divided | | vco_divided | | vco_divided |
+ * | _clk_src | | _clk_src | | _clk_src |
+ * | | | | | |
+ * |divsel_six | | divsel_two | | divsel_four |
+ * +-------+------+ +-----+--------+ +--------+------+
+ * | | |
+ * v---->----------v-------------<------v
+ * |
+ * +----------+-----------------+
+ * | dp_phy_pll_vco_div_clk |
+ * +---------+------------------+
+ * |
+ * v
+ * Input to DISPCC block
+ * for DP pixel clock
+ *
+ */
+static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 1620000000UL / 2:
+ case 2700000000UL / 2:
+ /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qmp_phy_dp_clks *dp_clks;
+ const struct qmp_phy *qphy;
+ const struct phy_configure_opts_dp *dp_opts;
+
+ dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
+ qphy = dp_clks->qphy;
+ dp_opts = &qphy->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ return 1620000000UL / 2;
+ case 2700:
+ return 2700000000UL / 2;
+ case 5400:
+ return 5400000000UL / 4;
+ case 8100:
+ return 8100000000UL / 6;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = {
+ .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate,
+ .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate,
+};
+
+static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 162000000:
+ case 270000000:
+ case 540000000:
+ case 810000000:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qmp_phy_dp_clks *dp_clks;
+ const struct qmp_phy *qphy;
+ const struct phy_configure_opts_dp *dp_opts;
+
+ dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
+ qphy = dp_clks->qphy;
+ dp_opts = &qphy->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ case 2700:
+ case 5400:
+ case 8100:
+ return dp_opts->link_rate * 100000;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_qmp_dp_link_clk_ops = {
+ .determine_rate = qcom_qmp_dp_link_clk_determine_rate,
+ .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate,
+};
+
+static struct clk_hw *
+qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct qmp_phy_dp_clks *dp_clks = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx >= 2) {
+ pr_err("%s: invalid index %u\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (idx == 0)
+ return &dp_clks->dp_link_hw;
+
+ return &dp_clks->dp_pixel_hw;
+}
+
+static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
+ struct device_node *np)
+{
+ struct clk_init_data init = { };
+ struct qmp_phy_dp_clks *dp_clks;
+ char name[64];
+ int ret;
+
+ dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
+ if (!dp_clks)
+ return -ENOMEM;
+
+ dp_clks->qphy = qphy;
+ qphy->dp_clks = dp_clks;
+
+ snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
+ init.ops = &qcom_qmp_dp_link_clk_ops;
+ init.name = name;
+ dp_clks->dp_link_hw.init = &init;
+ ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
+ if (ret)
+ return ret;
+
+ snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev));
+ init.ops = &qcom_qmp_dp_pixel_clk_ops;
+ init.name = name;
+ dp_clks->dp_pixel_hw.init = &init;
+ ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks);
+ if (ret)
+ return ret;
+
+ /*
+ * Roll a devm action because the clock provider is the child node, but
+ * the child node is not actually a device.
+ */
+ return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
+}
+
+static const struct phy_ops qcom_qmp_phy_gen_ops = {
+ .init = qcom_qmp_phy_enable,
+ .exit = qcom_qmp_phy_disable,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops qcom_qmp_phy_dp_ops = {
+ .init = qcom_qmp_phy_init,
+ .configure = qcom_qmp_dp_phy_configure,
+ .power_on = qcom_qmp_phy_power_on,
+ .calibrate = qcom_qmp_dp_phy_calibrate,
+ .power_off = qcom_qmp_phy_power_off,
+ .exit = qcom_qmp_phy_exit,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
+ .power_on = qcom_qmp_phy_enable,
+ .power_off = qcom_qmp_phy_disable,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static void qcom_qmp_reset_control_put(void *data)
+{
+ reset_control_put(data);
+}
+
+static
+int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
+ void __iomem *serdes, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct phy *generic_phy;
+ struct qmp_phy *qphy;
+ const struct phy_ops *ops;
+ char prop_name[MAX_PROP_NAME];
+ int ret;
+
+ qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
+ if (!qphy)
+ return -ENOMEM;
+
+ qphy->cfg = cfg;
+ qphy->serdes = serdes;
+ /*
+ * Get memory resources for each phy lane:
+ * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
+ * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
+ * For single lane PHYs: pcs_misc (optional) -> 3.
+ */
+ qphy->tx = of_iomap(np, 0);
+ if (!qphy->tx)
+ return -ENOMEM;
+
+ qphy->rx = of_iomap(np, 1);
+ if (!qphy->rx)
+ return -ENOMEM;
+
+ qphy->pcs = of_iomap(np, 2);
+ if (!qphy->pcs)
+ return -ENOMEM;
+
+ /*
+ * If this is a dual-lane PHY, then there should be registers for the
+ * second lane. Some old device trees did not specify this, so fall
+ * back to old legacy behavior of assuming they can be reached at an
+ * offset from the first lane.
+ */
+ if (cfg->is_dual_lane_phy) {
+ qphy->tx2 = of_iomap(np, 3);
+ qphy->rx2 = of_iomap(np, 4);
+ if (!qphy->tx2 || !qphy->rx2) {
+ dev_warn(dev,
+ "Underspecified device tree, falling back to legacy register regions\n");
+
+ /* In the old version, pcs_misc is at index 3. */
+ qphy->pcs_misc = qphy->tx2;
+ qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
+ qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
+
+ } else {
+ qphy->pcs_misc = of_iomap(np, 5);
+ }
+
+ } else {
+ qphy->pcs_misc = of_iomap(np, 3);
+ }
+
+ if (!qphy->pcs_misc)
+ dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
+
+ /*
+ * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
+ * based phys, so they essentially have pipe clock. So,
+ * we return error in case phy is USB3 or PIPE type.
+ * Otherwise, we initialize pipe clock to NULL for
+ * all phys that don't need this.
+ */
+ snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
+ qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
+ if (IS_ERR(qphy->pipe_clk)) {
+ if (cfg->type == PHY_TYPE_PCIE ||
+ cfg->type == PHY_TYPE_USB3) {
+ ret = PTR_ERR(qphy->pipe_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev,
+ "failed to get lane%d pipe_clk, %d\n",
+ id, ret);
+ return ret;
+ }
+ qphy->pipe_clk = NULL;
+ }
+
+ /* Get lane reset, if any */
+ if (cfg->has_lane_rst) {
+ snprintf(prop_name, sizeof(prop_name), "lane%d", id);
+ qphy->lane_rst = of_reset_control_get_exclusive(np, prop_name);
+ if (IS_ERR(qphy->lane_rst)) {
+ dev_err(dev, "failed to get lane%d reset\n", id);
+ return PTR_ERR(qphy->lane_rst);
+ }
+ ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put,
+ qphy->lane_rst);
+ if (ret)
+ return ret;
+ }
+
+ if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE)
+ ops = &qcom_qmp_pcie_ufs_ops;
+ else if (cfg->type == PHY_TYPE_DP)
+ ops = &qcom_qmp_phy_dp_ops;
+ else
+ ops = &qcom_qmp_phy_gen_ops;
+
+ generic_phy = devm_phy_create(dev, np, ops);
+ if (IS_ERR(generic_phy)) {
+ ret = PTR_ERR(generic_phy);
+ dev_err(dev, "failed to create qphy %d\n", ret);
+ return ret;
+ }
+
+ qphy->phy = generic_phy;
+ qphy->index = id;
+ qphy->qmp = qmp;
+ qmp->phys[id] = qphy;
+ phy_set_drvdata(generic_phy, qphy);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,ipq8074-qmp-usb3-phy",
+ .data = &ipq8074_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-pcie-phy",
+ .data = &msm8996_pciephy_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-ufs-phy",
+ .data = &msm8996_ufs_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qmp-usb3-phy",
+ .data = &msm8996_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-pcie-phy",
+ .data = &msm8998_pciephy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,ipq8074-qmp-pcie-phy",
+ .data = &ipq8074_pciephy_cfg,
+ }, {
+ .compatible = "qcom,ipq6018-qmp-pcie-phy",
+ .data = &ipq6018_pciephy_cfg,
+ }, {
+ .compatible = "qcom,ipq6018-qmp-usb3-phy",
+ .data = &ipq8074_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc7180-qmp-usb3-phy",
+ .data = &sc7180_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sc8180x-qmp-pcie-phy",
+ .data = &sc8180x_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sc8280xp-qmp-ufs-phy",
+ .data = &sm8350_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-usb3-phy",
+ .data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sdm845-qhp-pcie-phy",
+ .data = &sdm845_qhp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-pcie-phy",
+ .data = &sdm845_qmp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-usb3-phy",
+ .data = &qmp_v3_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-usb3-uni-phy",
+ .data = &qmp_v3_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-usb3-phy",
+ .data = &msm8998_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm6115-qmp-ufs-phy",
+ .data = &sm6115_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm6350-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-ufs-phy",
+ .data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-phy",
+ .data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-uni-phy",
+ .data = &sm8150_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-phy",
+ .data = &sm8250_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-uni-phy",
+ .data = &sm8250_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy",
+ .data = &sm8250_qmp_gen3x1_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy",
+ .data = &sm8250_qmp_gen3x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-ufs-phy",
+ .data = &sm8350_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-modem-pcie-phy",
+ .data = &sm8250_qmp_gen3x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdx55-qmp-pcie-phy",
+ .data = &sdx55_qmp_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sdx55-qmp-usb3-uni-phy",
+ .data = &sdx55_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sdx65-qmp-usb3-uni-phy",
+ .data = &sdx65_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-usb3-phy",
+ .data = &sm8350_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8350-qmp-usb3-uni-phy",
+ .data = &sm8350_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
+ .data = &sm8450_qmp_gen3x1_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
+ .data = &sm8450_qmp_gen4x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-ufs-phy",
+ .data = &sm8450_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-usb3-phy",
+ .data = &sm8350_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,qcm2290-qmp-usb3-phy",
+ .data = &qcm2290_usb3phy_cfg,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
+
+static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ .data = &sc7180_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ .data = &sm8250_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ .data = &sc8180x_usb3dpphy_cfg,
+ },
+ { }
+};
+
+static const struct dev_pm_ops qcom_qmp_phy_pm_ops = {
+ SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend,
+ qcom_qmp_phy_runtime_resume, NULL)
+};
+
+static int qcom_qmp_phy_probe(struct platform_device *pdev)
+{
+ struct qcom_qmp *qmp;
+ struct device *dev = &pdev->dev;
+ struct device_node *child;
+ struct phy_provider *phy_provider;
+ void __iomem *serdes;
+ void __iomem *usb_serdes;
+ void __iomem *dp_serdes = NULL;
+ const struct qmp_phy_combo_cfg *combo_cfg = NULL;
+ const struct qmp_phy_cfg *cfg = NULL;
+ const struct qmp_phy_cfg *usb_cfg = NULL;
+ const struct qmp_phy_cfg *dp_cfg = NULL;
+ int num, id, expected_phys;
+ int ret;
+
+ qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
+ if (!qmp)
+ return -ENOMEM;
+
+ qmp->dev = dev;
+ dev_set_drvdata(dev, qmp);
+
+ /* Get the specific init parameters of QMP phy */
+ cfg = of_device_get_match_data(dev);
+ if (!cfg) {
+ const struct of_device_id *match;
+
+ match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev);
+ if (!match)
+ return -EINVAL;
+
+ combo_cfg = match->data;
+ if (!combo_cfg)
+ return -EINVAL;
+
+ usb_cfg = combo_cfg->usb_cfg;
+ cfg = usb_cfg; /* Setup clks and regulators */
+ }
+
+ /* per PHY serdes; usually located at base address */
+ usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(serdes))
+ return PTR_ERR(serdes);
+
+ /* per PHY dp_com; if PHY has dp_com control block */
+ if (combo_cfg || cfg->has_phy_dp_com_ctrl) {
+ qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(qmp->dp_com))
+ return PTR_ERR(qmp->dp_com);
+ }
+
+ if (combo_cfg) {
+ /* Only two serdes for combo PHY */
+ dp_serdes = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(dp_serdes))
+ return PTR_ERR(dp_serdes);
+
+ dp_cfg = combo_cfg->dp_cfg;
+ expected_phys = 2;
+ } else {
+ expected_phys = cfg->nlanes;
+ }
+
+ mutex_init(&qmp->phy_mutex);
+
+ ret = qcom_qmp_phy_clk_init(dev, cfg);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_reset_init(dev, cfg);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_vreg_init(dev, cfg);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get regulator supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ num = of_get_available_child_count(dev->of_node);
+ /* do we have a rogue child node ? */
+ if (num > expected_phys)
+ return -EINVAL;
+
+ qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
+ if (!qmp->phys)
+ return -ENOMEM;
+
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ /*
+ * Prevent runtime pm from being ON by default. Users can enable
+ * it using power/control in sysfs.
+ */
+ pm_runtime_forbid(dev);
+
+ id = 0;
+ for_each_available_child_of_node(dev->of_node, child) {
+ if (of_node_name_eq(child, "dp-phy")) {
+ cfg = dp_cfg;
+ serdes = dp_serdes;
+ } else if (of_node_name_eq(child, "usb3-phy")) {
+ cfg = usb_cfg;
+ serdes = usb_serdes;
+ }
+
+ /* Create per-lane phy */
+ ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg);
+ if (ret) {
+ dev_err(dev, "failed to create lane%d phy, %d\n",
+ id, ret);
+ goto err_node_put;
+ }
+
+ /*
+ * Register the pipe clock provided by phy.
+ * See function description to see details of this pipe clock.
+ */
+ if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) {
+ ret = phy_pipe_clk_register(qmp, child);
+ if (ret) {
+ dev_err(qmp->dev,
+ "failed to register pipe clock source\n");
+ goto err_node_put;
+ }
+ } else if (cfg->type == PHY_TYPE_DP) {
+ ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
+ if (ret) {
+ dev_err(qmp->dev,
+ "failed to register DP clock source\n");
+ goto err_node_put;
+ }
+ }
+ id++;
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (!IS_ERR(phy_provider))
+ dev_info(dev, "Registered Qcom-QMP phy\n");
+ else
+ pm_runtime_disable(dev);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+
+err_node_put:
+ pm_runtime_disable(dev);
+ of_node_put(child);
+ return ret;
+}
+
+static struct platform_driver qcom_qmp_phy_driver = {
+ .probe = qcom_qmp_phy_probe,
+ .driver = {
+ .name = "qcom-qmp-phy",
+ .pm = &qcom_qmp_phy_pm_ops,
+ .of_match_table = qcom_qmp_phy_of_match_table,
+ },
+};
+
+module_platform_driver(qcom_qmp_phy_driver);
+
+MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm QMP PHY driver");
+MODULE_LICENSE("GPL v2");
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 558/731] powerpc/perf: callchain validate kernel stack pointer bounds
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (556 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 557/731] phy: qcom-qmp: create copies of QMP PHY driver Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 559/731] powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe() Greg Kroah-Hartman
` (183 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nicholas Piggin, Michael Ellerman,
Sasha Levin
From: Nicholas Piggin <npiggin@gmail.com>
[ Upstream commit 32c5209214bd8d4f8c4e9d9b630ef4c671f58e79 ]
The interrupt frame detection and loads from the hypothetical pt_regs
are not bounds-checked. The next-frame validation only bounds-checks
STACK_FRAME_OVERHEAD, which does not include the pt_regs. Add another
test for this.
The user could set r1 to be equal to the address matching the first
interrupt frame - STACK_INT_FRAME_SIZE, which is in the previous page
due to the kernel redzone, and induce the kernel to load the marker from
there. Possibly this could cause a crash at least. If the user could
induce the previous page to contain a valid marker, then it might be
able to direct perf to read specific memory addresses in a way that
could be transmitted back to the user in the perf data.
Fixes: 20002ded4d93 ("perf_counter: powerpc: Add callchain support")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/perf/callchain.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/perf/callchain.c b/arch/powerpc/perf/callchain.c
index 082f6d0308a4..8718289c051d 100644
--- a/arch/powerpc/perf/callchain.c
+++ b/arch/powerpc/perf/callchain.c
@@ -61,6 +61,7 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re
next_sp = fp[0];
if (next_sp == sp + STACK_INT_FRAME_SIZE &&
+ validate_sp(sp, current, STACK_INT_FRAME_SIZE) &&
fp[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
/*
* This looks like an interrupt frame for an
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 559/731] powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (557 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 558/731] powerpc/perf: callchain validate kernel stack pointer bounds Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 560/731] powerpc/hv-gpci: Fix hv_gpci event list Greg Kroah-Hartman
` (182 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Michael Ellerman,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 4d0eea415216fe3791da2f65eb41399e70c7bedf ]
If platform_device_add() is not called or failed, it can not call
platform_device_del() to clean up memory, it should call
platform_device_put() in error case.
Fixes: 26f6cb999366 ("[POWERPC] fsl_soc: add support for fsl_spi")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221029111626.429971-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/platforms/83xx/mpc832x_rdb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index b6133a237a70..6e18d0703568 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -106,7 +106,7 @@ static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
goto next;
unreg:
- platform_device_del(pdev);
+ platform_device_put(pdev);
err:
pr_err("%pOF: registration failed\n", np);
next:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 560/731] powerpc/hv-gpci: Fix hv_gpci event list
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (558 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 559/731] powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 561/731] selftests/powerpc: Fix resource leaks Greg Kroah-Hartman
` (181 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kajol Jain, Madhavan Srinivasan,
Athira Rajeev, Michael Ellerman, Sasha Levin
From: Kajol Jain <kjain@linux.ibm.com>
[ Upstream commit 03f7c1d2a49acd30e38789cd809d3300721e9b0e ]
Based on getPerfCountInfo v1.018 documentation, some of the
hv_gpci events were deprecated for platform firmware that
supports counter_info_version 0x8 or above.
Fix the hv_gpci event list by adding a new attribute group
called "hv_gpci_event_attrs_v6" and a "ENABLE_EVENTS_COUNTERINFO_V6"
macro to enable these events for platform firmware
that supports counter_info_version 0x6 or below. And assigning
the hv_gpci event list based on output counter info version
of underlying plaform.
Fixes: 97bf2640184f ("powerpc/perf/hv-gpci: add the remaining gpci requests")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221130174513.87501-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/perf/hv-gpci-requests.h | 4 ++++
arch/powerpc/perf/hv-gpci.c | 33 +++++++++++++++++++++++++++-
arch/powerpc/perf/hv-gpci.h | 1 +
arch/powerpc/perf/req-gen/perf.h | 20 +++++++++++++++++
4 files changed, 57 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/perf/hv-gpci-requests.h b/arch/powerpc/perf/hv-gpci-requests.h
index 8965b4463d43..5e86371a20c7 100644
--- a/arch/powerpc/perf/hv-gpci-requests.h
+++ b/arch/powerpc/perf/hv-gpci-requests.h
@@ -79,6 +79,7 @@ REQUEST(__field(0, 8, partition_id)
)
#include I(REQUEST_END)
+#ifdef ENABLE_EVENTS_COUNTERINFO_V6
/*
* Not available for counter_info_version >= 0x8, use
* run_instruction_cycles_by_partition(0x100) instead.
@@ -92,6 +93,7 @@ REQUEST(__field(0, 8, partition_id)
__count(0x10, 8, cycles)
)
#include I(REQUEST_END)
+#endif
#define REQUEST_NAME system_performance_capabilities
#define REQUEST_NUM 0x40
@@ -103,6 +105,7 @@ REQUEST(__field(0, 1, perf_collect_privileged)
)
#include I(REQUEST_END)
+#ifdef ENABLE_EVENTS_COUNTERINFO_V6
#define REQUEST_NAME processor_bus_utilization_abc_links
#define REQUEST_NUM 0x50
#define REQUEST_IDX_KIND "hw_chip_id=?"
@@ -194,6 +197,7 @@ REQUEST(__field(0, 4, phys_processor_idx)
__count(0x28, 8, instructions_completed)
)
#include I(REQUEST_END)
+#endif
/* Processor_core_power_mode (0x95) skipped, no counters */
/* Affinity_domain_information_by_virtual_processor (0xA0) skipped,
diff --git a/arch/powerpc/perf/hv-gpci.c b/arch/powerpc/perf/hv-gpci.c
index c756228a081f..28b770bbc10b 100644
--- a/arch/powerpc/perf/hv-gpci.c
+++ b/arch/powerpc/perf/hv-gpci.c
@@ -72,7 +72,7 @@ static struct attribute_group format_group = {
static struct attribute_group event_group = {
.name = "events",
- .attrs = hv_gpci_event_attrs,
+ /* .attrs is set in init */
};
#define HV_CAPS_ATTR(_name, _format) \
@@ -330,6 +330,7 @@ static int hv_gpci_init(void)
int r;
unsigned long hret;
struct hv_perf_caps caps;
+ struct hv_gpci_request_buffer *arg;
hv_gpci_assert_offsets_correct();
@@ -353,6 +354,36 @@ static int hv_gpci_init(void)
/* sampling not supported */
h_gpci_pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
+ arg = (void *)get_cpu_var(hv_gpci_reqb);
+ memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
+
+ /*
+ * hcall H_GET_PERF_COUNTER_INFO populates the output
+ * counter_info_version value based on the system hypervisor.
+ * Pass the counter request 0x10 corresponds to request type
+ * 'Dispatch_timebase_by_processor', to get the supported
+ * counter_info_version.
+ */
+ arg->params.counter_request = cpu_to_be32(0x10);
+
+ r = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
+ virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
+ if (r) {
+ pr_devel("hcall failed, can't get supported counter_info_version: 0x%x\n", r);
+ arg->params.counter_info_version_out = 0x8;
+ }
+
+ /*
+ * Use counter_info_version_out value to assign
+ * required hv-gpci event list.
+ */
+ if (arg->params.counter_info_version_out >= 0x8)
+ event_group.attrs = hv_gpci_event_attrs;
+ else
+ event_group.attrs = hv_gpci_event_attrs_v6;
+
+ put_cpu_var(hv_gpci_reqb);
+
r = perf_pmu_register(&h_gpci_pmu, h_gpci_pmu.name, -1);
if (r)
return r;
diff --git a/arch/powerpc/perf/hv-gpci.h b/arch/powerpc/perf/hv-gpci.h
index 4d108262bed7..c72020912dea 100644
--- a/arch/powerpc/perf/hv-gpci.h
+++ b/arch/powerpc/perf/hv-gpci.h
@@ -26,6 +26,7 @@ enum {
#define REQUEST_FILE "../hv-gpci-requests.h"
#define NAME_LOWER hv_gpci
#define NAME_UPPER HV_GPCI
+#define ENABLE_EVENTS_COUNTERINFO_V6
#include "req-gen/perf.h"
#undef REQUEST_FILE
#undef NAME_LOWER
diff --git a/arch/powerpc/perf/req-gen/perf.h b/arch/powerpc/perf/req-gen/perf.h
index fa9bc804e67a..6b2a59fefffa 100644
--- a/arch/powerpc/perf/req-gen/perf.h
+++ b/arch/powerpc/perf/req-gen/perf.h
@@ -139,6 +139,26 @@ PMU_EVENT_ATTR_STRING( \
#define REQUEST_(r_name, r_value, r_idx_1, r_fields) \
r_fields
+/* Generate event list for platforms with counter_info_version 0x6 or below */
+static __maybe_unused struct attribute *hv_gpci_event_attrs_v6[] = {
+#include REQUEST_FILE
+ NULL
+};
+
+/*
+ * Based on getPerfCountInfo v1.018 documentation, some of the hv-gpci
+ * events were deprecated for platform firmware that supports
+ * counter_info_version 0x8 or above.
+ * Those deprecated events are still part of platform firmware that
+ * support counter_info_version 0x6 and below. As per the getPerfCountInfo
+ * v1.018 documentation there is no counter_info_version 0x7.
+ * Undefining macro ENABLE_EVENTS_COUNTERINFO_V6, to disable the addition of
+ * deprecated events in "hv_gpci_event_attrs" attribute group, for platforms
+ * that supports counter_info_version 0x8 or above.
+ */
+#undef ENABLE_EVENTS_COUNTERINFO_V6
+
+/* Generate event list for platforms with counter_info_version 0x8 or above*/
static __maybe_unused struct attribute *hv_gpci_event_attrs[] = {
#include REQUEST_FILE
NULL
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 561/731] selftests/powerpc: Fix resource leaks
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (559 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 560/731] powerpc/hv-gpci: Fix hv_gpci event list Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 562/731] iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY Greg Kroah-Hartman
` (180 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miaoqian Lin, Michael Ellerman, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit 8f4ab7da904ab7027ccd43ddb4f0094e932a5877 ]
In check_all_cpu_dscr_defaults, opendir() opens the directory stream.
Add missing closedir() in the error path to release it.
In check_cpu_dscr_default, open() creates an open file descriptor.
Add missing close() in the error path to release it.
Fixes: ebd5858c904b ("selftests/powerpc: Add test for all DSCR sysfs interfaces")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221205084429.570654-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c b/tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c
index fbbdffdb2e5d..f20d1c166d1e 100644
--- a/tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c
+++ b/tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c
@@ -24,6 +24,7 @@ static int check_cpu_dscr_default(char *file, unsigned long val)
rc = read(fd, buf, sizeof(buf));
if (rc == -1) {
perror("read() failed");
+ close(fd);
return 1;
}
close(fd);
@@ -65,8 +66,10 @@ static int check_all_cpu_dscr_defaults(unsigned long val)
if (access(file, F_OK))
continue;
- if (check_cpu_dscr_default(file, val))
+ if (check_cpu_dscr_default(file, val)) {
+ closedir(sysfs);
return 1;
+ }
}
closedir(sysfs);
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 562/731] iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (560 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 561/731] selftests/powerpc: Fix resource leaks Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 563/731] pwm: sifive: Call pwm_sifive_update_clock() while mutex is held Greg Kroah-Hartman
` (179 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jason Gunthorpe, Robin Murphy,
Joerg Roedel, Sasha Levin
From: Jason Gunthorpe <jgg@nvidia.com>
[ Upstream commit ef5bb8e7a7127218f826b9ccdf7508e7a339f4c2 ]
This driver treats IOMMU_DOMAIN_IDENTITY the same as UNMANAGED, which
cannot possibly be correct.
UNMANAGED domains are required to start out blocking all DMAs. This seems
to be what this driver does as it allocates a first level 'dt' for the IO
page table that is 0 filled.
Thus UNMANAGED looks like a working IO page table, and so IDENTITY must be
a mistake. Remove it.
Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-97f0adf27b5e+1f0-s50_identity_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/sun50i-iommu.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/iommu/sun50i-iommu.c b/drivers/iommu/sun50i-iommu.c
index ece3d4b4d7ca..ed3574195599 100644
--- a/drivers/iommu/sun50i-iommu.c
+++ b/drivers/iommu/sun50i-iommu.c
@@ -602,7 +602,6 @@ static struct iommu_domain *sun50i_iommu_domain_alloc(unsigned type)
struct sun50i_iommu_domain *sun50i_domain;
if (type != IOMMU_DOMAIN_DMA &&
- type != IOMMU_DOMAIN_IDENTITY &&
type != IOMMU_DOMAIN_UNMANAGED)
return NULL;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 563/731] pwm: sifive: Call pwm_sifive_update_clock() while mutex is held
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (561 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 562/731] iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 564/731] pwm: mtk-disp: Fix the parameters calculated by the enabled flag of disp_pwm Greg Kroah-Hartman
` (178 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Emil Renner Berthing,
Uwe Kleine-König, Thierry Reding, Sasha Levin
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[ Upstream commit 45558b3abb87eeb2cedb8a59cb2699c120b5102a ]
As was documented in commit 0f02f491b786 ("pwm: sifive: Reduce time the
controller lock is held") a caller of pwm_sifive_update_clock() must
hold the mutex. So fix pwm_sifive_clock_notifier() to grab the lock.
While this necessity was only documented later, the race exists since
the driver was introduced.
Fixes: 9e37a53eb051 ("pwm: sifive: Add a driver for SiFive SoC PWM")
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20221018061656.1428111-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pwm/pwm-sifive.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c
index 58347fcd4812..07e9fc58354f 100644
--- a/drivers/pwm/pwm-sifive.c
+++ b/drivers/pwm/pwm-sifive.c
@@ -217,8 +217,11 @@ static int pwm_sifive_clock_notifier(struct notifier_block *nb,
struct pwm_sifive_ddata *ddata =
container_of(nb, struct pwm_sifive_ddata, notifier);
- if (event == POST_RATE_CHANGE)
+ if (event == POST_RATE_CHANGE) {
+ mutex_lock(&ddata->lock);
pwm_sifive_update_clock(ddata, ndata->new_rate);
+ mutex_unlock(&ddata->lock);
+ }
return NOTIFY_OK;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 564/731] pwm: mtk-disp: Fix the parameters calculated by the enabled flag of disp_pwm
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (562 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 563/731] pwm: sifive: Call pwm_sifive_update_clock() while mutex is held Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 565/731] pwm: mediatek: always use bus clock for PWM on MT7622 Greg Kroah-Hartman
` (177 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, xinlei lee, Uwe Kleine-König,
AngeloGioacchino Del Regno, Thierry Reding, Sasha Levin
From: xinlei lee <xinlei.lee@mediatek.com>
[ Upstream commit 0b5ef3429d8f78427558ab0dcbfd862098ba2a63 ]
In the original mtk_disp_pwm_get_state() function wrongly uses bit 0 of
CON0 to judge if the PWM is enabled.
However that is indicated by a bit (at a machine dependent position) in
the DISP_PWM_EN register. Fix this accordingly.
Fixes: 3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()")
Signed-off-by: xinlei lee <xinlei.lee@mediatek.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/1666172538-11652-1-git-send-email-xinlei.lee@mediatek.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pwm/pwm-mtk-disp.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index c605013e4114..3fbb4bae93a4 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -178,7 +178,7 @@ static void mtk_disp_pwm_get_state(struct pwm_chip *chip,
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
u64 rate, period, high_width;
- u32 clk_div, con0, con1;
+ u32 clk_div, pwm_en, con0, con1;
int err;
err = clk_prepare_enable(mdp->clk_main);
@@ -197,7 +197,8 @@ static void mtk_disp_pwm_get_state(struct pwm_chip *chip,
rate = clk_get_rate(mdp->clk_main);
con0 = readl(mdp->base + mdp->data->con0);
con1 = readl(mdp->base + mdp->data->con1);
- state->enabled = !!(con0 & BIT(0));
+ pwm_en = readl(mdp->base + DISP_PWM_EN);
+ state->enabled = !!(pwm_en & mdp->data->enable_mask);
clk_div = FIELD_GET(PWM_CLKDIV_MASK, con0);
period = FIELD_GET(PWM_PERIOD_MASK, con1);
/*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 565/731] pwm: mediatek: always use bus clock for PWM on MT7622
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (563 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 564/731] pwm: mtk-disp: Fix the parameters calculated by the enabled flag of disp_pwm Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 566/731] remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev() Greg Kroah-Hartman
` (176 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Daniel Golle,
AngeloGioacchino Del Regno, Uwe Kleine-König,
Thierry Reding, Sasha Levin
From: Daniel Golle <daniel@makrotopia.org>
[ Upstream commit aa3c668f2f98856af96e13f44da6ca4f26f0b98c ]
According to MT7622 Reference Manual for Development Board v1.0 the PWM
unit found in the MT7622 SoC also comes with the PWM_CK_26M_SEL register
at offset 0x210 just like other modern MediaTek ARM64 SoCs.
And also MT7622 sets that register to 0x00000001 on reset which is
described as 'Select 26M fix CLK as BCLK' in the datasheet.
Hence set has_ck_26m_sel to true also for MT7622 which results in the
driver writing 0 to the PWM_CK_26M_SEL register which is described as
'Select bus CLK as BCLK'.
Fixes: 0c0ead76235db0 ("pwm: mediatek: Always use bus clock")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/Y1iF2slvSblf6bYK@makrotopia.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pwm/pwm-mediatek.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index 0d4dd80e9f07..f8f9a7489129 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -275,7 +275,7 @@ static const struct pwm_mediatek_of_data mt2712_pwm_data = {
static const struct pwm_mediatek_of_data mt7622_pwm_data = {
.num_pwms = 6,
.pwm45_fixup = false,
- .has_ck_26m_sel = false,
+ .has_ck_26m_sel = true,
};
static const struct pwm_mediatek_of_data mt7623_pwm_data = {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 566/731] remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (564 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 565/731] pwm: mediatek: always use bus clock for PWM on MT7622 Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 567/731] remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio() Greg Kroah-Hartman
` (175 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Bjorn Andersson, Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit e01ce676aaef3b13d02343d7e70f9637d93a3367 ]
The kfree() should be called when of_irq_get_byname() fails or
devm_request_threaded_irq() fails in qcom_add_sysmon_subdev(),
otherwise there will be a memory leak, so add kfree() to fix it.
Fixes: 027045a6e2b7 ("remoteproc: qcom: Add shutdown-ack irq")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221129105650.1539187-1-cuigaosheng1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/remoteproc/qcom_sysmon.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/remoteproc/qcom_sysmon.c b/drivers/remoteproc/qcom_sysmon.c
index a9f04dd83ab6..fbfaf2637a91 100644
--- a/drivers/remoteproc/qcom_sysmon.c
+++ b/drivers/remoteproc/qcom_sysmon.c
@@ -650,7 +650,9 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
if (sysmon->shutdown_irq != -ENODATA) {
dev_err(sysmon->dev,
"failed to retrieve shutdown-ack IRQ\n");
- return ERR_PTR(sysmon->shutdown_irq);
+ ret = sysmon->shutdown_irq;
+ kfree(sysmon);
+ return ERR_PTR(ret);
}
} else {
ret = devm_request_threaded_irq(sysmon->dev,
@@ -661,6 +663,7 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
if (ret) {
dev_err(sysmon->dev,
"failed to acquire shutdown-ack IRQ\n");
+ kfree(sysmon);
return ERR_PTR(ret);
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 567/731] remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (565 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 566/731] remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 568/731] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove Greg Kroah-Hartman
` (174 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Bjorn Andersson,
Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit f360e2b275efbb745ba0af8b47d9ef44221be586 ]
q6v5_wcss_init_mmio() will call platform_get_resource_byname() that may
fail and return NULL. devm_ioremap() will use res->start as input, which
may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref.
Fixes: 0af65b9b915e ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221125021641.29392-1-shangxiaojing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/remoteproc/qcom_q6v5_wcss.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 20d50ec7eff1..9e67e323a55a 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -827,6 +827,9 @@ static int q6v5_wcss_init_mmio(struct q6v5_wcss *wcss,
int ret;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qdsp6");
+ if (!res)
+ return -EINVAL;
+
wcss->reg_base = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
if (!wcss->reg_base)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 568/731] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (566 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 567/731] remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 569/731] remoteproc: qcom_q6v5_pas: detach power domains on remove Greg Kroah-Hartman
` (173 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mukesh Ojha, Luca Weiss,
Caleb Connolly, Sibi Sankar, Bjorn Andersson, Sasha Levin
From: Luca Weiss <luca.weiss@fairphone.com>
[ Upstream commit 9a70551996e699fda262e8d54bbd41739d7aad6d ]
Leaving wakeup enabled during probe fail (-EPROBE_DEFER) or remove makes
the subsequent probe fail.
[ 3.749454] remoteproc remoteproc0: releasing 3000000.remoteproc
[ 3.752949] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
[ 3.878935] remoteproc remoteproc0: releasing 4080000.remoteproc
[ 3.887602] qcom_q6v5_pas: probe of 4080000.remoteproc failed with error -17
[ 4.319552] remoteproc remoteproc0: releasing 8300000.remoteproc
[ 4.332716] qcom_q6v5_pas: probe of 8300000.remoteproc failed with error -17
Fix this by disabling wakeup in both cases so the driver can properly
probe on the next try.
Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery")
Fixes: dc86c129b4fb ("remoteproc: qcom: pas: Mark devices as wakeup capable")
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118090816.100012-1-luca.weiss@fairphone.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/remoteproc/qcom_q6v5_pas.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 78d90d856e40..533b48522326 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -498,6 +498,7 @@ static int adsp_probe(struct platform_device *pdev)
detach_active_pds:
adsp_pds_detach(adsp, adsp->active_pds, adsp->active_pd_count);
free_rproc:
+ device_init_wakeup(adsp->dev, false);
rproc_free(rproc);
return ret;
@@ -513,6 +514,7 @@ static int adsp_remove(struct platform_device *pdev)
qcom_remove_sysmon_subdev(adsp->sysmon);
qcom_remove_smd_subdev(adsp->rproc, &adsp->smd_subdev);
qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev);
+ device_init_wakeup(adsp->dev, false);
rproc_free(adsp->rproc);
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 569/731] remoteproc: qcom_q6v5_pas: detach power domains on remove
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (567 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 568/731] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 570/731] remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region() Greg Kroah-Hartman
` (172 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sibi Sankar, Mukesh Ojha,
Luca Weiss, Bjorn Andersson, Sasha Levin
From: Luca Weiss <luca.weiss@fairphone.com>
[ Upstream commit 34d01df00b84127be04c914fc9f8e8be1fcdf851 ]
We need to detach from the power domains also on remove, not just on
probe fail so a subsequent probe works as expected.
Otherwise the following error appears on re-probe:
[ 29.452005] sysfs: cannot create duplicate filename '/devices/genpd:0:3000000.remoteproc'
[ 29.477121] CPU: 1 PID: 483 Comm: sh Tainted: G W 6.1.0-rc4-00075-g71a113770bda #78
[ 29.510319] Hardware name: Fairphone 4 (DT)
[ 29.538335] Call trace:
[ 29.564470] dump_backtrace.part.0+0xe0/0xf0
[ 29.592602] show_stack+0x18/0x30
[ 29.619616] dump_stack_lvl+0x64/0x80
[ 29.646834] dump_stack+0x18/0x34
[ 29.673541] sysfs_warn_dup+0x60/0x7c
[ 29.700592] sysfs_create_dir_ns+0xec/0x110
[ 29.728057] kobject_add_internal+0xb8/0x374
[ 29.755530] kobject_add+0x9c/0x104
[ 29.782072] device_add+0xbc/0x8a0
[ 29.808445] device_register+0x20/0x30
[ 29.835175] genpd_dev_pm_attach_by_id+0xa4/0x190
[ 29.862851] genpd_dev_pm_attach_by_name+0x3c/0xb0
[ 29.890472] dev_pm_domain_attach_by_name+0x20/0x30
[ 29.918212] adsp_probe+0x278/0x580
[ 29.944384] platform_probe+0x68/0xc0
[ 29.970603] really_probe+0xbc/0x2dc
[ 29.996662] __driver_probe_device+0x78/0xe0
[ 30.023491] device_driver_attach+0x48/0xac
[ 30.050215] bind_store+0xb8/0x114
[ 30.075957] drv_attr_store+0x24/0x3c
[ 30.101874] sysfs_kf_write+0x44/0x54
[ 30.127751] kernfs_fop_write_iter+0x120/0x1f0
[ 30.154448] vfs_write+0x1ac/0x380
[ 30.179937] ksys_write+0x70/0x104
[ 30.205274] __arm64_sys_write+0x1c/0x2c
[ 30.231060] invoke_syscall+0x48/0x114
[ 30.256594] el0_svc_common.constprop.0+0x44/0xec
[ 30.283183] do_el0_svc+0x2c/0xd0
[ 30.308320] el0_svc+0x2c/0x84
[ 30.333059] el0t_64_sync_handler+0xf4/0x120
[ 30.359001] el0t_64_sync+0x18c/0x190
[ 30.384385] kobject_add_internal failed for genpd:0:3000000.remoteproc with -EEXIST, don't try to register things with the same name in the same directory.
[ 30.406029] remoteproc remoteproc0: releasing 3000000.remoteproc
[ 30.416064] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
Fixes: 17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118090816.100012-2-luca.weiss@fairphone.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/remoteproc/qcom_q6v5_pas.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 533b48522326..8b82fd598dfa 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -514,6 +514,7 @@ static int adsp_remove(struct platform_device *pdev)
qcom_remove_sysmon_subdev(adsp->sysmon);
qcom_remove_smd_subdev(adsp->rproc, &adsp->smd_subdev);
qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev);
+ adsp_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
device_init_wakeup(adsp->dev, false);
rproc_free(adsp->rproc);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 570/731] remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (568 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 569/731] remoteproc: qcom_q6v5_pas: detach power domains on remove Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 571/731] remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on() Greg Kroah-Hartman
` (171 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Bjorn Andersson, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 38e7d9c19276832ebb0277f415b9214bf7baeb37 ]
The pointer node is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221203070639.15128-1-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/remoteproc/qcom_q6v5_pas.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 8b82fd598dfa..fbcbc00f2e64 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -386,6 +386,7 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
}
ret = of_address_to_resource(node, 0, &r);
+ of_node_put(node);
if (ret)
return ret;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 571/731] remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (569 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 570/731] remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 572/731] powerpc/eeh: Drop redundant spinlock initialization Greg Kroah-Hartman
` (170 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Bjorn Andersson,
Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit 7ff5d60f18bba5cbaf17b2926aa9da44d5beca01 ]
q6v5_wcss_qcs404_power_on() have no fail path for readl_poll_timeout().
Add fail path for readl_poll_timeout().
Fixes: 0af65b9b915e ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204082757.18850-1-shangxiaojing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/remoteproc/qcom_q6v5_wcss.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 9e67e323a55a..cfd34ffcbb12 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -351,7 +351,7 @@ static int q6v5_wcss_qcs404_power_on(struct q6v5_wcss *wcss)
if (ret) {
dev_err(wcss->dev,
"xo cbcr enabling timed out (rc:%d)\n", ret);
- return ret;
+ goto disable_xo_cbcr_clk;
}
writel(0, wcss->reg_base + Q6SS_CGC_OVERRIDE);
@@ -417,6 +417,7 @@ static int q6v5_wcss_qcs404_power_on(struct q6v5_wcss *wcss)
val = readl(wcss->reg_base + Q6SS_SLEEP_CBCR);
val &= ~Q6SS_CLK_ENABLE;
writel(val, wcss->reg_base + Q6SS_SLEEP_CBCR);
+disable_xo_cbcr_clk:
val = readl(wcss->reg_base + Q6SS_XO_CBCR);
val &= ~Q6SS_CLK_ENABLE;
writel(val, wcss->reg_base + Q6SS_XO_CBCR);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 572/731] powerpc/eeh: Drop redundant spinlock initialization
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (570 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 571/731] remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 573/731] powerpc/pseries/eeh: use correct API for error log size Greg Kroah-Hartman
` (169 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Haowen Bai, Michael Ellerman, Sasha Levin
From: Haowen Bai <baihaowen@meizu.com>
[ Upstream commit 3def164a5cedad9117859dd4610cae2cc59cb6d2 ]
slot_errbuf_lock has declared and initialized by DEFINE_SPINLOCK,
so we don't need to spin_lock_init again, drop it.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1652232476-9696-1-git-send-email-baihaowen@meizu.com
Stable-dep-of: 9aafbfa5f57a ("powerpc/pseries/eeh: use correct API for error log size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/platforms/pseries/eeh_pseries.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 09fafcf2d3a0..08ce7e4ad9f0 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -845,8 +845,7 @@ static int __init eeh_pseries_init(void)
return -EINVAL;
}
- /* Initialize error log lock and size */
- spin_lock_init(&slot_errbuf_lock);
+ /* Initialize error log size */
eeh_error_buf_size = rtas_token("rtas-error-log-max");
if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) {
pr_info("%s: unknown EEH error log size\n",
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 573/731] powerpc/pseries/eeh: use correct API for error log size
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (571 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 572/731] powerpc/eeh: Drop redundant spinlock initialization Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 574/731] mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ Greg Kroah-Hartman
` (168 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nathan Lynch, Michael Ellerman, Sasha Levin
From: Nathan Lynch <nathanl@linux.ibm.com>
[ Upstream commit 9aafbfa5f57a4b75bafd3bed0191e8429c5fa618 ]
rtas-error-log-max is not the name of an RTAS function, so rtas_token()
is not the appropriate API for retrieving its value. We already have
rtas_get_error_log_max() which returns a sensible value if the property
is absent for any reason, so use that instead.
Fixes: 8d633291b4fc ("powerpc/eeh: pseries platform EEH error log retrieval")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Drop no-longer possible error handling as noticed by ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-6-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/platforms/pseries/eeh_pseries.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 08ce7e4ad9f0..f51fd4ac3f0b 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -846,16 +846,7 @@ static int __init eeh_pseries_init(void)
}
/* Initialize error log size */
- eeh_error_buf_size = rtas_token("rtas-error-log-max");
- if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) {
- pr_info("%s: unknown EEH error log size\n",
- __func__);
- eeh_error_buf_size = 1024;
- } else if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) {
- pr_info("%s: EEH error log size %d exceeds the maximal %d\n",
- __func__, eeh_error_buf_size, RTAS_ERROR_LOG_MAX);
- eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
- }
+ eeh_error_buf_size = rtas_get_error_log_max();
/* Set EEH probe mode */
eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 574/731] mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (572 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 573/731] powerpc/pseries/eeh: use correct API for error log size Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 575/731] mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe() Greg Kroah-Hartman
` (167 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Matti Vaittinen, Lee Jones, Sasha Levin
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
[ Upstream commit 85842c46fd47fa6bd78681c154223bed27d5fd19 ]
The BD957x driver uses REGMAP_IRQ but does not 'select' to depend on
it. This can cause build failures. Select REGMAP_IRQ for BD957X.
Fixes: 0e9692607f94 ("mfd: bd9576: Add IRQ support")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/Y3SdCWkRr1L64SWK@dc75zzyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mfd/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d2f345245538..5dd7ea0ebd46 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1995,6 +1995,7 @@ config MFD_ROHM_BD957XMUF
depends on I2C=y
depends on OF
select REGMAP_I2C
+ select REGMAP_IRQ
select MFD_CORE
help
Select this option to get support for the ROHM BD9576MUF and
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 575/731] mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (573 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 574/731] mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 576/731] mfd: pm8008: Remove driver data structure pm8008_data Greg Kroah-Hartman
` (166 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christophe JAILLET, Lee Jones, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit 36579aca877a62f67ecd77eb3edefc4c86292406 ]
If an error occurs after the clk_prepare_enable() call, a corresponding
clk_disable_unprepare() should be called.
Simplify code and switch to devm_clk_get_enabled() to fix it.
Fixes: 3526403353c2 ("mfd: qcom_rpm: Handle message RAM clock")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/e39752476d02605b2be46cab7115f71255ce13a8.1668949256.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mfd/qcom_rpm.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
index 71bc34b74bc9..ea5eb94427c4 100644
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -547,7 +547,7 @@ static int qcom_rpm_probe(struct platform_device *pdev)
init_completion(&rpm->ack);
/* Enable message RAM clock */
- rpm->ramclk = devm_clk_get(&pdev->dev, "ram");
+ rpm->ramclk = devm_clk_get_enabled(&pdev->dev, "ram");
if (IS_ERR(rpm->ramclk)) {
ret = PTR_ERR(rpm->ramclk);
if (ret == -EPROBE_DEFER)
@@ -558,7 +558,6 @@ static int qcom_rpm_probe(struct platform_device *pdev)
*/
rpm->ramclk = NULL;
}
- clk_prepare_enable(rpm->ramclk); /* Accepts NULL */
irq_ack = platform_get_irq_byname(pdev, "ack");
if (irq_ack < 0)
@@ -681,7 +680,6 @@ static int qcom_rpm_remove(struct platform_device *pdev)
struct qcom_rpm *rpm = dev_get_drvdata(&pdev->dev);
of_platform_depopulate(&pdev->dev);
- clk_disable_unprepare(rpm->ramclk);
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 576/731] mfd: pm8008: Remove driver data structure pm8008_data
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (574 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 575/731] mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 577/731] mfd: pm8008: Fix return value check in pm8008_probe() Greg Kroah-Hartman
` (165 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Lee Jones, Sasha Levin
From: Lee Jones <lee.jones@linaro.org>
[ Upstream commit 915696927cd6e7838d25dab8fbd2ae05d4acce84 ]
Maintaining a local driver data structure that is never shared
outside of the core device is an unnecessary complexity. Half of the
attributes were not used outside of a single function, one of which
was not used at all. The remaining 2 are generic and can be passed
around as required.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Stable-dep-of: 14f8c55d48e0 ("mfd: pm8008: Fix return value check in pm8008_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mfd/qcom-pm8008.c | 53 +++++++++++++++------------------------
1 file changed, 20 insertions(+), 33 deletions(-)
diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
index c472d7f8103c..4b8ff947762f 100644
--- a/drivers/mfd/qcom-pm8008.c
+++ b/drivers/mfd/qcom-pm8008.c
@@ -54,13 +54,6 @@ enum {
#define PM8008_PERIPH_OFFSET(paddr) (paddr - PM8008_PERIPH_0_BASE)
-struct pm8008_data {
- struct device *dev;
- struct regmap *regmap;
- int irq;
- struct regmap_irq_chip_data *irq_data;
-};
-
static unsigned int p0_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_0_BASE)};
static unsigned int p1_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_1_BASE)};
static unsigned int p2_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_2_BASE)};
@@ -150,7 +143,7 @@ static struct regmap_config qcom_mfd_regmap_cfg = {
.max_register = 0xFFFF,
};
-static int pm8008_init(struct pm8008_data *chip)
+static int pm8008_init(struct regmap *regmap)
{
int rc;
@@ -160,34 +153,31 @@ static int pm8008_init(struct pm8008_data *chip)
* This is required to enable the writing of TYPE registers in
* regmap_irq_sync_unlock().
*/
- rc = regmap_write(chip->regmap,
- (PM8008_TEMP_ALARM_ADDR | INT_SET_TYPE_OFFSET),
- BIT(0));
+ rc = regmap_write(regmap, (PM8008_TEMP_ALARM_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
if (rc)
return rc;
/* Do the same for GPIO1 and GPIO2 peripherals */
- rc = regmap_write(chip->regmap,
- (PM8008_GPIO1_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
+ rc = regmap_write(regmap, (PM8008_GPIO1_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
if (rc)
return rc;
- rc = regmap_write(chip->regmap,
- (PM8008_GPIO2_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
+ rc = regmap_write(regmap, (PM8008_GPIO2_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
return rc;
}
-static int pm8008_probe_irq_peripherals(struct pm8008_data *chip,
+static int pm8008_probe_irq_peripherals(struct device *dev,
+ struct regmap *regmap,
int client_irq)
{
int rc, i;
struct regmap_irq_type *type;
struct regmap_irq_chip_data *irq_data;
- rc = pm8008_init(chip);
+ rc = pm8008_init(regmap);
if (rc) {
- dev_err(chip->dev, "Init failed: %d\n", rc);
+ dev_err(dev, "Init failed: %d\n", rc);
return rc;
}
@@ -207,10 +197,10 @@ static int pm8008_probe_irq_peripherals(struct pm8008_data *chip,
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
}
- rc = devm_regmap_add_irq_chip(chip->dev, chip->regmap, client_irq,
+ rc = devm_regmap_add_irq_chip(dev, regmap, client_irq,
IRQF_SHARED, 0, &pm8008_irq_chip, &irq_data);
if (rc) {
- dev_err(chip->dev, "Failed to add IRQ chip: %d\n", rc);
+ dev_err(dev, "Failed to add IRQ chip: %d\n", rc);
return rc;
}
@@ -220,26 +210,23 @@ static int pm8008_probe_irq_peripherals(struct pm8008_data *chip,
static int pm8008_probe(struct i2c_client *client)
{
int rc;
- struct pm8008_data *chip;
-
- chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
+ struct device *dev;
+ struct regmap *regmap;
- chip->dev = &client->dev;
- chip->regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg);
- if (!chip->regmap)
+ dev = &client->dev;
+ regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg);
+ if (!regmap)
return -ENODEV;
- i2c_set_clientdata(client, chip);
+ i2c_set_clientdata(client, regmap);
- if (of_property_read_bool(chip->dev->of_node, "interrupt-controller")) {
- rc = pm8008_probe_irq_peripherals(chip, client->irq);
+ if (of_property_read_bool(dev->of_node, "interrupt-controller")) {
+ rc = pm8008_probe_irq_peripherals(dev, regmap, client->irq);
if (rc)
- dev_err(chip->dev, "Failed to probe irq periphs: %d\n", rc);
+ dev_err(dev, "Failed to probe irq periphs: %d\n", rc);
}
- return devm_of_platform_populate(chip->dev);
+ return devm_of_platform_populate(dev);
}
static const struct of_device_id pm8008_match[] = {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 577/731] mfd: pm8008: Fix return value check in pm8008_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (575 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 576/731] mfd: pm8008: Remove driver data structure pm8008_data Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 578/731] netfilter: flowtable: really fix NAT IPv6 offload Greg Kroah-Hartman
` (164 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Bjorn Andersson,
Guru Das Srinagesh, Lee Jones, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 14f8c55d48e02157519fbcb3a5de557abd8a06e2 ]
In case of error, the function devm_regmap_init_i2c() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Fixes: 6b149f3310a4 ("mfd: pm8008: Add driver for QCOM PM8008 PMIC")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221125073626.1868229-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mfd/qcom-pm8008.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
index 4b8ff947762f..9f3c4a01b4c1 100644
--- a/drivers/mfd/qcom-pm8008.c
+++ b/drivers/mfd/qcom-pm8008.c
@@ -215,8 +215,8 @@ static int pm8008_probe(struct i2c_client *client)
dev = &client->dev;
regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg);
- if (!regmap)
- return -ENODEV;
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
i2c_set_clientdata(client, regmap);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 578/731] netfilter: flowtable: really fix NAT IPv6 offload
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (576 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 577/731] mfd: pm8008: Fix return value check in pm8008_probe() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 579/731] rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe() Greg Kroah-Hartman
` (163 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Qingfang DENG, Pablo Neira Ayuso,
Sasha Levin
From: Qingfang DENG <dqfext@gmail.com>
[ Upstream commit 5fb45f95eec682621748b7cb012c6a8f0f981e6a ]
The for-loop was broken from the start. It translates to:
for (i = 0; i < 4; i += 4)
which means the loop statement is run only once, so only the highest
32-bit of the IPv6 address gets mangled.
Fix the loop increment.
Fixes: 0e07e25b481a ("netfilter: flowtable: fix NAT IPv6 offload mangling")
Fixes: 5c27d8d76ce8 ("netfilter: nf_flow_table_offload: add IPv6 support")
Signed-off-by: Qingfang DENG <dqfext@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_flow_table_offload.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/netfilter/nf_flow_table_offload.c b/net/netfilter/nf_flow_table_offload.c
index 66c9a6c2b9cf..336f282a221f 100644
--- a/net/netfilter/nf_flow_table_offload.c
+++ b/net/netfilter/nf_flow_table_offload.c
@@ -372,12 +372,12 @@ static void flow_offload_ipv6_mangle(struct nf_flow_rule *flow_rule,
const __be32 *addr, const __be32 *mask)
{
struct flow_action_entry *entry;
- int i, j;
+ int i;
- for (i = 0, j = 0; i < sizeof(struct in6_addr) / sizeof(u32); i += sizeof(u32), j++) {
+ for (i = 0; i < sizeof(struct in6_addr) / sizeof(u32); i++) {
entry = flow_action_entry_next(flow_rule);
flow_offload_mangle(entry, FLOW_ACT_MANGLE_HDR_TYPE_IP6,
- offset + i, &addr[j], mask);
+ offset + i * sizeof(u32), &addr[i], mask);
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 579/731] rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (577 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 578/731] netfilter: flowtable: really fix NAT IPv6 offload Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 580/731] rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe() Greg Kroah-Hartman
` (162 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Alexandre Belloni,
Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit 5fb733d7bd6949e90028efdce8bd528c6ab7cf1e ]
The clk_disable_unprepare() should be called in the error handling
of clk_get_rate(), fix it.
Fixes: b5b2bdfc2893 ("rtc: st: Add new driver for ST's LPC RTC")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221123014805.1993052-1-cuigaosheng1@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-st-lpc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/rtc/rtc-st-lpc.c b/drivers/rtc/rtc-st-lpc.c
index bdb20f63254e..0f8e4231098e 100644
--- a/drivers/rtc/rtc-st-lpc.c
+++ b/drivers/rtc/rtc-st-lpc.c
@@ -238,6 +238,7 @@ static int st_rtc_probe(struct platform_device *pdev)
rtc->clkrate = clk_get_rate(rtc->clk);
if (!rtc->clkrate) {
+ clk_disable_unprepare(rtc->clk);
dev_err(&pdev->dev, "Unable to fetch clock rate\n");
return -EINVAL;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 580/731] rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (578 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 579/731] rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 581/731] rtc: pcf85063: fix pcf85063_clkout_control Greg Kroah-Hartman
` (161 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Alexandre Belloni,
Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit 90cd5c88830140c9fade92a8027e0fb2c6e4cc49 ]
The pic32_rtc_enable(pdata, 0) and clk_disable_unprepare(pdata->clk)
should be called in the error handling of devm_rtc_allocate_device(),
so we should move devm_rtc_allocate_device earlier in pic32_rtc_probe()
to fix it.
Fixes: 6515e23b9fde ("rtc: pic32: convert to devm_rtc_allocate_device")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221123015953.1998521-1-cuigaosheng1@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-pic32.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/rtc/rtc-pic32.c b/drivers/rtc/rtc-pic32.c
index 7fb9145c43bd..fa351ac20158 100644
--- a/drivers/rtc/rtc-pic32.c
+++ b/drivers/rtc/rtc-pic32.c
@@ -324,16 +324,16 @@ static int pic32_rtc_probe(struct platform_device *pdev)
spin_lock_init(&pdata->alarm_lock);
+ pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(pdata->rtc))
+ return PTR_ERR(pdata->rtc);
+
clk_prepare_enable(pdata->clk);
pic32_rtc_enable(pdata, 1);
device_init_wakeup(&pdev->dev, 1);
- pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
- if (IS_ERR(pdata->rtc))
- return PTR_ERR(pdata->rtc);
-
pdata->rtc->ops = &pic32_rtcops;
pdata->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
pdata->rtc->range_max = RTC_TIMESTAMP_END_2099;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 581/731] rtc: pcf85063: fix pcf85063_clkout_control
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (579 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 580/731] rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 582/731] nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure Greg Kroah-Hartman
` (160 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Janne Terho, Alexandre Belloni, Sasha Levin
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
[ Upstream commit c2d12e85336f6d4172fb2bab5935027c446d7343 ]
pcf85063_clkout_control reads the wrong register but then update the
correct one.
Reported-by: Janne Terho <janne.terho@ouman.fi>
Fixes: 8c229ab6048b ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework")
Link: https://lore.kernel.org/r/20221211223553.59955-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-pcf85063.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index 3e2837722667..bf2e370907b7 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -422,7 +422,7 @@ static int pcf85063_clkout_control(struct clk_hw *hw, bool enable)
unsigned int buf;
int ret;
- ret = regmap_read(pcf85063->regmap, PCF85063_REG_OFFSET, &buf);
+ ret = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &buf);
if (ret < 0)
return ret;
buf &= PCF85063_REG_CLKO_F_MASK;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 582/731] nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (580 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 581/731] rtc: pcf85063: fix pcf85063_clkout_control Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 583/731] net: macsec: fix net device access prior to holding a lock Greg Kroah-Hartman
` (159 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiyu Yang, J. Bruce Fields,
Dan Aloni, Jeff Layton, Chuck Lever, Sasha Levin
From: Dan Aloni <dan.aloni@vastdata.com>
[ Upstream commit 3bc8edc98bd43540dbe648e4ef91f443d6d20a24 ]
On error situation `clp->cl_cb_conn.cb_xprt` should not be given
a reference to the xprt otherwise both client cleanup and the
error handling path of the caller call to put it. Better to
delay handing over the reference to a later branch.
[ 72.530665] refcount_t: underflow; use-after-free.
[ 72.531933] WARNING: CPU: 0 PID: 173 at lib/refcount.c:28 refcount_warn_saturate+0xcf/0x120
[ 72.533075] Modules linked in: nfsd(OE) nfsv4(OE) nfsv3(OE) nfs(OE) lockd(OE) compat_nfs_ssc(OE) nfs_acl(OE) rpcsec_gss_krb5(OE) auth_rpcgss(OE) rpcrdma(OE) dns_resolver fscache netfs grace rdma_cm iw_cm ib_cm sunrpc(OE) mlx5_ib mlx5_core mlxfw pci_hyperv_intf ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nft_counter xt_addrtype nft_compat br_netfilter bridge stp llc nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set overlay nf_tables nfnetlink crct10dif_pclmul crc32_pclmul ghash_clmulni_intel xfs serio_raw virtio_net virtio_blk net_failover failover fuse [last unloaded: sunrpc]
[ 72.540389] CPU: 0 PID: 173 Comm: kworker/u16:5 Tainted: G OE 5.15.82-dan #1
[ 72.541511] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-3.module+el8.7.0+1084+97b81f61 04/01/2014
[ 72.542717] Workqueue: nfsd4_callbacks nfsd4_run_cb_work [nfsd]
[ 72.543575] RIP: 0010:refcount_warn_saturate+0xcf/0x120
[ 72.544299] Code: 55 00 0f 0b 5d e9 01 50 98 00 80 3d 75 9e 39 08 00 0f 85 74 ff ff ff 48 c7 c7 e8 d1 60 8e c6 05 61 9e 39 08 01 e8 f6 51 55 00 <0f> 0b 5d e9 d9 4f 98 00 80 3d 4b 9e 39 08 00 0f 85 4c ff ff ff 48
[ 72.546666] RSP: 0018:ffffb3f841157cf0 EFLAGS: 00010286
[ 72.547393] RAX: 0000000000000026 RBX: ffff89ac6231d478 RCX: 0000000000000000
[ 72.548324] RDX: ffff89adb7c2c2c0 RSI: ffff89adb7c205c0 RDI: ffff89adb7c205c0
[ 72.549271] RBP: ffffb3f841157cf0 R08: 0000000000000000 R09: c0000000ffefffff
[ 72.550209] R10: 0000000000000001 R11: ffffb3f841157ad0 R12: ffff89ac6231d180
[ 72.551142] R13: ffff89ac6231d478 R14: ffff89ac40c06180 R15: ffff89ac6231d4b0
[ 72.552089] FS: 0000000000000000(0000) GS:ffff89adb7c00000(0000) knlGS:0000000000000000
[ 72.553175] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 72.553934] CR2: 0000563a310506a8 CR3: 0000000109a66000 CR4: 0000000000350ef0
[ 72.554874] Call Trace:
[ 72.555278] <TASK>
[ 72.555614] svc_xprt_put+0xaf/0xe0 [sunrpc]
[ 72.556276] nfsd4_process_cb_update.isra.11+0xb7/0x410 [nfsd]
[ 72.557087] ? update_load_avg+0x82/0x610
[ 72.557652] ? cpuacct_charge+0x60/0x70
[ 72.558212] ? dequeue_entity+0xdb/0x3e0
[ 72.558765] ? queued_spin_unlock+0x9/0x20
[ 72.559358] nfsd4_run_cb_work+0xfc/0x270 [nfsd]
[ 72.560031] process_one_work+0x1df/0x390
[ 72.560600] worker_thread+0x37/0x3b0
[ 72.561644] ? process_one_work+0x390/0x390
[ 72.562247] kthread+0x12f/0x150
[ 72.562710] ? set_kthread_struct+0x50/0x50
[ 72.563309] ret_from_fork+0x22/0x30
[ 72.563818] </TASK>
[ 72.564189] ---[ end trace 031117b1c72ec616 ]---
[ 72.566019] list_add corruption. next->prev should be prev (ffff89ac4977e538), but was ffff89ac4763e018. (next=ffff89ac4763e018).
[ 72.567647] ------------[ cut here ]------------
Fixes: a4abc6b12eb1 ("nfsd: Fix svc_xprt refcnt leak when setup callback client failed")
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs4callback.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c
index 0f8b10f363e7..2e0040d3bca7 100644
--- a/fs/nfsd/nfs4callback.c
+++ b/fs/nfsd/nfs4callback.c
@@ -917,7 +917,6 @@ static int setup_callback_client(struct nfs4_client *clp, struct nfs4_cb_conn *c
} else {
if (!conn->cb_xprt)
return -EINVAL;
- clp->cl_cb_conn.cb_xprt = conn->cb_xprt;
clp->cl_cb_session = ses;
args.bc_xprt = conn->cb_xprt;
args.prognumber = clp->cl_cb_session->se_cb_prog;
@@ -937,6 +936,9 @@ static int setup_callback_client(struct nfs4_client *clp, struct nfs4_cb_conn *c
rpc_shutdown_client(client);
return -ENOMEM;
}
+
+ if (clp->cl_minorversion != 0)
+ clp->cl_cb_conn.cb_xprt = conn->cb_xprt;
clp->cl_cb_client = client;
clp->cl_cb_cred = cred;
rcu_read_lock();
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 583/731] net: macsec: fix net device access prior to holding a lock
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (581 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 582/731] nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 584/731] mISDN: hfcsusb: dont call dev_kfree_skb/kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
` (158 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Raed Salem, Emeel Hakim,
Jakub Kicinski, Sasha Levin
From: Emeel Hakim <ehakim@nvidia.com>
[ Upstream commit f3b4a00f0f62da252c598310698dfc82ef2f2e2e ]
Currently macsec offload selection update routine accesses
the net device prior to holding the relevant lock.
Fix by holding the lock prior to the device access.
Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection")
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Link: https://lore.kernel.org/r/20221211075532.28099-1-ehakim@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/macsec.c | 34 +++++++++++++++++++++-------------
1 file changed, 21 insertions(+), 13 deletions(-)
diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 88e44eb39285..10b3f4fb2612 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -2580,7 +2580,7 @@ static int macsec_upd_offload(struct sk_buff *skb, struct genl_info *info)
const struct macsec_ops *ops;
struct macsec_context ctx;
struct macsec_dev *macsec;
- int ret;
+ int ret = 0;
if (!attrs[MACSEC_ATTR_IFINDEX])
return -EINVAL;
@@ -2593,28 +2593,36 @@ static int macsec_upd_offload(struct sk_buff *skb, struct genl_info *info)
macsec_genl_offload_policy, NULL))
return -EINVAL;
+ rtnl_lock();
+
dev = get_dev_from_nl(genl_info_net(info), attrs);
- if (IS_ERR(dev))
- return PTR_ERR(dev);
+ if (IS_ERR(dev)) {
+ ret = PTR_ERR(dev);
+ goto out;
+ }
macsec = macsec_priv(dev);
- if (!tb_offload[MACSEC_OFFLOAD_ATTR_TYPE])
- return -EINVAL;
+ if (!tb_offload[MACSEC_OFFLOAD_ATTR_TYPE]) {
+ ret = -EINVAL;
+ goto out;
+ }
offload = nla_get_u8(tb_offload[MACSEC_OFFLOAD_ATTR_TYPE]);
if (macsec->offload == offload)
- return 0;
+ goto out;
/* Check if the offloading mode is supported by the underlying layers */
if (offload != MACSEC_OFFLOAD_OFF &&
- !macsec_check_offload(offload, macsec))
- return -EOPNOTSUPP;
+ !macsec_check_offload(offload, macsec)) {
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
/* Check if the net device is busy. */
- if (netif_running(dev))
- return -EBUSY;
-
- rtnl_lock();
+ if (netif_running(dev)) {
+ ret = -EBUSY;
+ goto out;
+ }
prev_offload = macsec->offload;
macsec->offload = offload;
@@ -2649,7 +2657,7 @@ static int macsec_upd_offload(struct sk_buff *skb, struct genl_info *info)
rollback:
macsec->offload = prev_offload;
-
+out:
rtnl_unlock();
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 584/731] mISDN: hfcsusb: dont call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (582 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 583/731] net: macsec: fix net device access prior to holding a lock Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 585/731] mISDN: hfcpci: " Greg Kroah-Hartman
` (157 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Alexander Duyck,
Jakub Kicinski, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit ddc9648db162eee556edd5222d2808fe33730203 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
skb_queue_purge() is called under spin_lock_irqsave() in hfcusb_l2l1D(),
kfree_skb() is called in it, to fix this, use skb_queue_splice_init()
to move the dch->squeue to a free queue, also enqueue the tx_skb and
rx_skb, at last calling __skb_queue_purge() to free the SKBs afer unlock.
In tx_iso_complete(), dev_kfree_skb() is called to consume the transmitted
SKB, so replace it with dev_consume_skb_irq().
Fixes: 69f52adb2d53 ("mISDN: Add HFC USB driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/isdn/hardware/mISDN/hfcsusb.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index cd5642cef01f..e8b37bd5e34a 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -326,20 +326,24 @@ hfcusb_l2l1D(struct mISDNchannel *ch, struct sk_buff *skb)
test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
if (hw->protocol == ISDN_P_NT_S0) {
+ struct sk_buff_head free_queue;
+
+ __skb_queue_head_init(&free_queue);
hfcsusb_ph_command(hw, HFC_L1_DEACTIVATE_NT);
spin_lock_irqsave(&hw->lock, flags);
- skb_queue_purge(&dch->squeue);
+ skb_queue_splice_init(&dch->squeue, &free_queue);
if (dch->tx_skb) {
- dev_kfree_skb(dch->tx_skb);
+ __skb_queue_tail(&free_queue, dch->tx_skb);
dch->tx_skb = NULL;
}
dch->tx_idx = 0;
if (dch->rx_skb) {
- dev_kfree_skb(dch->rx_skb);
+ __skb_queue_tail(&free_queue, dch->rx_skb);
dch->rx_skb = NULL;
}
test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
spin_unlock_irqrestore(&hw->lock, flags);
+ __skb_queue_purge(&free_queue);
#ifdef FIXME
if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
dchannel_sched_event(&hc->dch, D_CLEARBUSY);
@@ -1330,7 +1334,7 @@ tx_iso_complete(struct urb *urb)
printk("\n");
}
- dev_kfree_skb(tx_skb);
+ dev_consume_skb_irq(tx_skb);
tx_skb = NULL;
if (fifo->dch && get_next_dframe(fifo->dch))
tx_skb = fifo->dch->tx_skb;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 585/731] mISDN: hfcpci: dont call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (583 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 584/731] mISDN: hfcsusb: dont call dev_kfree_skb/kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 586/731] mISDN: hfcmulti: " Greg Kroah-Hartman
` (156 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Alexander Duyck,
Jakub Kicinski, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit f0f596bd75a9d573ca9b587abb39cee0b916bb82 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
skb_queue_purge() is called under spin_lock_irqsave() in hfcpci_l2l1D(),
kfree_skb() is called in it, to fix this, use skb_queue_splice_init()
to move the dch->squeue to a free queue, also enqueue the tx_skb and
rx_skb, at last calling __skb_queue_purge() to free the SKBs afer unlock.
Fixes: 1700fe1a10dc ("Add mISDN HFC PCI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/isdn/hardware/mISDN/hfcpci.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index af17459c1a5c..eba58b99cd29 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -1617,16 +1617,19 @@ hfcpci_l2l1D(struct mISDNchannel *ch, struct sk_buff *skb)
test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
spin_lock_irqsave(&hc->lock, flags);
if (hc->hw.protocol == ISDN_P_NT_S0) {
+ struct sk_buff_head free_queue;
+
+ __skb_queue_head_init(&free_queue);
/* prepare deactivation */
Write_hfc(hc, HFCPCI_STATES, 0x40);
- skb_queue_purge(&dch->squeue);
+ skb_queue_splice_init(&dch->squeue, &free_queue);
if (dch->tx_skb) {
- dev_kfree_skb(dch->tx_skb);
+ __skb_queue_tail(&free_queue, dch->tx_skb);
dch->tx_skb = NULL;
}
dch->tx_idx = 0;
if (dch->rx_skb) {
- dev_kfree_skb(dch->rx_skb);
+ __skb_queue_tail(&free_queue, dch->rx_skb);
dch->rx_skb = NULL;
}
test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
@@ -1639,10 +1642,12 @@ hfcpci_l2l1D(struct mISDNchannel *ch, struct sk_buff *skb)
hc->hw.mst_m &= ~HFCPCI_MASTER;
Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
ret = 0;
+ spin_unlock_irqrestore(&hc->lock, flags);
+ __skb_queue_purge(&free_queue);
} else {
ret = l1_event(dch->l1, hh->prim);
+ spin_unlock_irqrestore(&hc->lock, flags);
}
- spin_unlock_irqrestore(&hc->lock, flags);
break;
}
if (!ret)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 586/731] mISDN: hfcmulti: dont call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (584 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 585/731] mISDN: hfcpci: " Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 587/731] block, bfq: fix possible uaf for bfqq->bic Greg Kroah-Hartman
` (155 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Alexander Duyck,
Jakub Kicinski, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 1232946cf522b8de9e398828bde325d7c41f29dd ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
skb_queue_purge() is called under spin_lock_irqsave() in handle_dmsg()
and hfcm_l1callback(), kfree_skb() is called in them, to fix this, use
skb_queue_splice_init() to move the dch->squeue to a free queue, also
enqueue the tx_skb and rx_skb, at last calling __skb_queue_purge() to
free the SKBs afer unlock.
Fixes: af69fb3a8ffa ("Add mISDN HFC multiport driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/isdn/hardware/mISDN/hfcmulti.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 4f7eaa17fb27..e840609c50eb 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -3217,6 +3217,7 @@ static int
hfcm_l1callback(struct dchannel *dch, u_int cmd)
{
struct hfc_multi *hc = dch->hw;
+ struct sk_buff_head free_queue;
u_long flags;
switch (cmd) {
@@ -3245,6 +3246,7 @@ hfcm_l1callback(struct dchannel *dch, u_int cmd)
l1_event(dch->l1, HW_POWERUP_IND);
break;
case HW_DEACT_REQ:
+ __skb_queue_head_init(&free_queue);
/* start deactivation */
spin_lock_irqsave(&hc->lock, flags);
if (hc->ctype == HFC_TYPE_E1) {
@@ -3264,20 +3266,21 @@ hfcm_l1callback(struct dchannel *dch, u_int cmd)
plxsd_checksync(hc, 0);
}
}
- skb_queue_purge(&dch->squeue);
+ skb_queue_splice_init(&dch->squeue, &free_queue);
if (dch->tx_skb) {
- dev_kfree_skb(dch->tx_skb);
+ __skb_queue_tail(&free_queue, dch->tx_skb);
dch->tx_skb = NULL;
}
dch->tx_idx = 0;
if (dch->rx_skb) {
- dev_kfree_skb(dch->rx_skb);
+ __skb_queue_tail(&free_queue, dch->rx_skb);
dch->rx_skb = NULL;
}
test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
del_timer(&dch->timer);
spin_unlock_irqrestore(&hc->lock, flags);
+ __skb_queue_purge(&free_queue);
break;
case HW_POWERUP_REQ:
spin_lock_irqsave(&hc->lock, flags);
@@ -3384,6 +3387,9 @@ handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
case PH_DEACTIVATE_REQ:
test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+ struct sk_buff_head free_queue;
+
+ __skb_queue_head_init(&free_queue);
spin_lock_irqsave(&hc->lock, flags);
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
@@ -3405,14 +3411,14 @@ handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
/* deactivate */
dch->state = 1;
}
- skb_queue_purge(&dch->squeue);
+ skb_queue_splice_init(&dch->squeue, &free_queue);
if (dch->tx_skb) {
- dev_kfree_skb(dch->tx_skb);
+ __skb_queue_tail(&free_queue, dch->tx_skb);
dch->tx_skb = NULL;
}
dch->tx_idx = 0;
if (dch->rx_skb) {
- dev_kfree_skb(dch->rx_skb);
+ __skb_queue_tail(&free_queue, dch->rx_skb);
dch->rx_skb = NULL;
}
test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
@@ -3424,6 +3430,7 @@ handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
#endif
ret = 0;
spin_unlock_irqrestore(&hc->lock, flags);
+ __skb_queue_purge(&free_queue);
} else
ret = l1_event(dch->l1, hh->prim);
break;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 587/731] block, bfq: fix possible uaf for bfqq->bic
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (585 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 586/731] mISDN: hfcmulti: " Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 588/731] selftests/bpf: Add test for unstable CT lookup API Greg Kroah-Hartman
` (154 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jan Kara, Yu Kuai, Jens Axboe, Sasha Levin
From: Yu Kuai <yukuai3@huawei.com>
[ Upstream commit 64dc8c732f5c2b406cc752e6aaa1bd5471159cab ]
Our test report a uaf for 'bfqq->bic' in 5.10:
==================================================================
BUG: KASAN: use-after-free in bfq_select_queue+0x378/0xa30
CPU: 6 PID: 2318352 Comm: fsstress Kdump: loaded Not tainted 5.10.0-60.18.0.50.h602.kasan.eulerosv2r11.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-20220320_160524-szxrtosci10000 04/01/2014
Call Trace:
bfq_select_queue+0x378/0xa30
bfq_dispatch_request+0xe8/0x130
blk_mq_do_dispatch_sched+0x62/0xb0
__blk_mq_sched_dispatch_requests+0x215/0x2a0
blk_mq_sched_dispatch_requests+0x8f/0xd0
__blk_mq_run_hw_queue+0x98/0x180
__blk_mq_delay_run_hw_queue+0x22b/0x240
blk_mq_run_hw_queue+0xe3/0x190
blk_mq_sched_insert_requests+0x107/0x200
blk_mq_flush_plug_list+0x26e/0x3c0
blk_finish_plug+0x63/0x90
__iomap_dio_rw+0x7b5/0x910
iomap_dio_rw+0x36/0x80
ext4_dio_read_iter+0x146/0x190 [ext4]
ext4_file_read_iter+0x1e2/0x230 [ext4]
new_sync_read+0x29f/0x400
vfs_read+0x24e/0x2d0
ksys_read+0xd5/0x1b0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Commit 3bc5e683c67d ("bfq: Split shared queues on move between cgroups")
changes that move process to a new cgroup will allocate a new bfqq to
use, however, the old bfqq and new bfqq can point to the same bic:
1) Initial state, two process with io in the same cgroup.
Process 1 Process 2
(BIC1) (BIC2)
| Λ | Λ
| | | |
V | V |
bfqq1 bfqq2
2) bfqq1 is merged to bfqq2.
Process 1 Process 2
(BIC1) (BIC2)
| |
\-------------\|
V
bfqq1 bfqq2(coop)
3) Process 1 exit, then issue new io(denoce IOA) from Process 2.
(BIC2)
| Λ
| |
V |
bfqq2(coop)
4) Before IOA is completed, move Process 2 to another cgroup and issue io.
Process 2
(BIC2)
Λ
|\--------------\
| V
bfqq2 bfqq3
Now that BIC2 points to bfqq3, while bfqq2 and bfqq3 both point to BIC2.
If all the requests are completed, and Process 2 exit, BIC2 will be
freed while there is no guarantee that bfqq2 will be freed before BIC2.
Fix the problem by clearing bfqq->bic while bfqq is detached from bic.
Fixes: 3bc5e683c67d ("bfq: Split shared queues on move between cgroups")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221214030430.3304151-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/bfq-iosched.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index f21b861a0d66..b8b6e9eae94b 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -386,6 +386,12 @@ static void bfq_put_stable_ref(struct bfq_queue *bfqq);
void bic_set_bfqq(struct bfq_io_cq *bic, struct bfq_queue *bfqq, bool is_sync)
{
+ struct bfq_queue *old_bfqq = bic->bfqq[is_sync];
+
+ /* Clear bic pointer if bfqq is detached from this bic */
+ if (old_bfqq && old_bfqq->bic == bic)
+ old_bfqq->bic = NULL;
+
/*
* If bfqq != NULL, then a non-stable queue merge between
* bic->bfqq and bfqq is happening here. This causes troubles
@@ -5245,7 +5251,6 @@ static void bfq_exit_icq_bfqq(struct bfq_io_cq *bic, bool is_sync)
unsigned long flags;
spin_lock_irqsave(&bfqd->lock, flags);
- bfqq->bic = NULL;
bfq_exit_bfqq(bfqd, bfqq);
bic_set_bfqq(bic, NULL, is_sync);
spin_unlock_irqrestore(&bfqd->lock, flags);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 588/731] selftests/bpf: Add test for unstable CT lookup API
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (586 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 587/731] block, bfq: fix possible uaf for bfqq->bic Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 589/731] net: enetc: avoid buffer leaks on xdp_do_redirect() failure Greg Kroah-Hartman
` (153 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kumar Kartikeya Dwivedi,
Alexei Starovoitov, Sasha Levin
From: Kumar Kartikeya Dwivedi <memxor@gmail.com>
[ Upstream commit 87091063df5d4845d1db0761a9ed5510c4756a96 ]
This tests that we return errors as documented, and also that the kfunc
calls work from both XDP and TC hooks.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: a8dfde09c901 ("selftests/bpf: Select CONFIG_FUNCTION_ERROR_INJECTION")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/config | 4 +
.../testing/selftests/bpf/prog_tests/bpf_nf.c | 48 ++++++++
.../testing/selftests/bpf/progs/test_bpf_nf.c | 109 ++++++++++++++++++
3 files changed, 161 insertions(+)
create mode 100644 tools/testing/selftests/bpf/prog_tests/bpf_nf.c
create mode 100644 tools/testing/selftests/bpf/progs/test_bpf_nf.c
diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config
index 5192305159ec..4a2a47fcd6ef 100644
--- a/tools/testing/selftests/bpf/config
+++ b/tools/testing/selftests/bpf/config
@@ -46,3 +46,7 @@ CONFIG_IMA_READ_POLICY=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_FUNCTION_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
+CONFIG_NETFILTER=y
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_DEFRAG_IPV6=y
+CONFIG_NF_CONNTRACK=y
diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_nf.c b/tools/testing/selftests/bpf/prog_tests/bpf_nf.c
new file mode 100644
index 000000000000..e3166a81e989
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/bpf_nf.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <test_progs.h>
+#include <network_helpers.h>
+#include "test_bpf_nf.skel.h"
+
+enum {
+ TEST_XDP,
+ TEST_TC_BPF,
+};
+
+void test_bpf_nf_ct(int mode)
+{
+ struct test_bpf_nf *skel;
+ int prog_fd, err, retval;
+
+ skel = test_bpf_nf__open_and_load();
+ if (!ASSERT_OK_PTR(skel, "test_bpf_nf__open_and_load"))
+ return;
+
+ if (mode == TEST_XDP)
+ prog_fd = bpf_program__fd(skel->progs.nf_xdp_ct_test);
+ else
+ prog_fd = bpf_program__fd(skel->progs.nf_skb_ct_test);
+
+ err = bpf_prog_test_run(prog_fd, 1, &pkt_v4, sizeof(pkt_v4), NULL, NULL,
+ (__u32 *)&retval, NULL);
+ if (!ASSERT_OK(err, "bpf_prog_test_run"))
+ goto end;
+
+ ASSERT_EQ(skel->bss->test_einval_bpf_tuple, -EINVAL, "Test EINVAL for NULL bpf_tuple");
+ ASSERT_EQ(skel->bss->test_einval_reserved, -EINVAL, "Test EINVAL for reserved not set to 0");
+ ASSERT_EQ(skel->bss->test_einval_netns_id, -EINVAL, "Test EINVAL for netns_id < -1");
+ ASSERT_EQ(skel->bss->test_einval_len_opts, -EINVAL, "Test EINVAL for len__opts != NF_BPF_CT_OPTS_SZ");
+ ASSERT_EQ(skel->bss->test_eproto_l4proto, -EPROTO, "Test EPROTO for l4proto != TCP or UDP");
+ ASSERT_EQ(skel->bss->test_enonet_netns_id, -ENONET, "Test ENONET for bad but valid netns_id");
+ ASSERT_EQ(skel->bss->test_enoent_lookup, -ENOENT, "Test ENOENT for failed lookup");
+ ASSERT_EQ(skel->bss->test_eafnosupport, -EAFNOSUPPORT, "Test EAFNOSUPPORT for invalid len__tuple");
+end:
+ test_bpf_nf__destroy(skel);
+}
+
+void test_bpf_nf(void)
+{
+ if (test__start_subtest("xdp-ct"))
+ test_bpf_nf_ct(TEST_XDP);
+ if (test__start_subtest("tc-bpf-ct"))
+ test_bpf_nf_ct(TEST_TC_BPF);
+}
diff --git a/tools/testing/selftests/bpf/progs/test_bpf_nf.c b/tools/testing/selftests/bpf/progs/test_bpf_nf.c
new file mode 100644
index 000000000000..6f131c993c0b
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/test_bpf_nf.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <vmlinux.h>
+#include <bpf/bpf_helpers.h>
+
+#define EAFNOSUPPORT 97
+#define EPROTO 71
+#define ENONET 64
+#define EINVAL 22
+#define ENOENT 2
+
+int test_einval_bpf_tuple = 0;
+int test_einval_reserved = 0;
+int test_einval_netns_id = 0;
+int test_einval_len_opts = 0;
+int test_eproto_l4proto = 0;
+int test_enonet_netns_id = 0;
+int test_enoent_lookup = 0;
+int test_eafnosupport = 0;
+
+struct nf_conn *bpf_xdp_ct_lookup(struct xdp_md *, struct bpf_sock_tuple *, u32,
+ struct bpf_ct_opts *, u32) __ksym;
+struct nf_conn *bpf_skb_ct_lookup(struct __sk_buff *, struct bpf_sock_tuple *, u32,
+ struct bpf_ct_opts *, u32) __ksym;
+void bpf_ct_release(struct nf_conn *) __ksym;
+
+static __always_inline void
+nf_ct_test(struct nf_conn *(*func)(void *, struct bpf_sock_tuple *, u32,
+ struct bpf_ct_opts *, u32),
+ void *ctx)
+{
+ struct bpf_ct_opts opts_def = { .l4proto = IPPROTO_TCP, .netns_id = -1 };
+ struct bpf_sock_tuple bpf_tuple;
+ struct nf_conn *ct;
+
+ __builtin_memset(&bpf_tuple, 0, sizeof(bpf_tuple.ipv4));
+
+ ct = func(ctx, NULL, 0, &opts_def, sizeof(opts_def));
+ if (ct)
+ bpf_ct_release(ct);
+ else
+ test_einval_bpf_tuple = opts_def.error;
+
+ opts_def.reserved[0] = 1;
+ ct = func(ctx, &bpf_tuple, sizeof(bpf_tuple.ipv4), &opts_def, sizeof(opts_def));
+ opts_def.reserved[0] = 0;
+ opts_def.l4proto = IPPROTO_TCP;
+ if (ct)
+ bpf_ct_release(ct);
+ else
+ test_einval_reserved = opts_def.error;
+
+ opts_def.netns_id = -2;
+ ct = func(ctx, &bpf_tuple, sizeof(bpf_tuple.ipv4), &opts_def, sizeof(opts_def));
+ opts_def.netns_id = -1;
+ if (ct)
+ bpf_ct_release(ct);
+ else
+ test_einval_netns_id = opts_def.error;
+
+ ct = func(ctx, &bpf_tuple, sizeof(bpf_tuple.ipv4), &opts_def, sizeof(opts_def) - 1);
+ if (ct)
+ bpf_ct_release(ct);
+ else
+ test_einval_len_opts = opts_def.error;
+
+ opts_def.l4proto = IPPROTO_ICMP;
+ ct = func(ctx, &bpf_tuple, sizeof(bpf_tuple.ipv4), &opts_def, sizeof(opts_def));
+ opts_def.l4proto = IPPROTO_TCP;
+ if (ct)
+ bpf_ct_release(ct);
+ else
+ test_eproto_l4proto = opts_def.error;
+
+ opts_def.netns_id = 0xf00f;
+ ct = func(ctx, &bpf_tuple, sizeof(bpf_tuple.ipv4), &opts_def, sizeof(opts_def));
+ opts_def.netns_id = -1;
+ if (ct)
+ bpf_ct_release(ct);
+ else
+ test_enonet_netns_id = opts_def.error;
+
+ ct = func(ctx, &bpf_tuple, sizeof(bpf_tuple.ipv4), &opts_def, sizeof(opts_def));
+ if (ct)
+ bpf_ct_release(ct);
+ else
+ test_enoent_lookup = opts_def.error;
+
+ ct = func(ctx, &bpf_tuple, sizeof(bpf_tuple.ipv4) - 1, &opts_def, sizeof(opts_def));
+ if (ct)
+ bpf_ct_release(ct);
+ else
+ test_eafnosupport = opts_def.error;
+}
+
+SEC("xdp")
+int nf_xdp_ct_test(struct xdp_md *ctx)
+{
+ nf_ct_test((void *)bpf_xdp_ct_lookup, ctx);
+ return 0;
+}
+
+SEC("tc")
+int nf_skb_ct_test(struct __sk_buff *ctx)
+{
+ nf_ct_test((void *)bpf_skb_ct_lookup, ctx);
+ return 0;
+}
+
+char _license[] SEC("license") = "GPL";
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 589/731] net: enetc: avoid buffer leaks on xdp_do_redirect() failure
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (587 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 588/731] selftests/bpf: Add test for unstable CT lookup API Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 590/731] nfc: pn533: Clear nfc_target before being used Greg Kroah-Hartman
` (152 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lorenzo Bianconi, Vladimir Oltean,
Jakub Kicinski, Sasha Levin
From: Vladimir Oltean <vladimir.oltean@nxp.com>
[ Upstream commit 628050ec952d2e2e46ec9fb6aa07e41139e030c8 ]
Before enetc_clean_rx_ring_xdp() calls xdp_do_redirect(), each software
BD in the RX ring between index orig_i and i can have one of 2 refcount
values on its page.
We are the owner of the current buffer that is being processed, so the
refcount will be at least 1.
If the current owner of the buffer at the diametrically opposed index
in the RX ring (i.o.w, the other half of this page) has not yet called
kfree(), this page's refcount could even be 2.
enetc_page_reusable() in enetc_flip_rx_buff() tests for the page
refcount against 1, and [ if it's 2 ] does not attempt to reuse it.
But if enetc_flip_rx_buff() is put after the xdp_do_redirect() call,
the page refcount can have one of 3 values. It can also be 0, if there
is no owner of the other page half, and xdp_do_redirect() for this
buffer ran so far that it triggered a flush of the devmap/cpumap bulk
queue, and the consumers of those bulk queues also freed the buffer,
all by the time xdp_do_redirect() returns the execution back to enetc.
This is the reason why enetc_flip_rx_buff() is called before
xdp_do_redirect(), but there is a big flaw with that reasoning:
enetc_flip_rx_buff() will set rx_swbd->page = NULL on both sides of the
enetc_page_reusable() branch, and if xdp_do_redirect() returns an error,
we call enetc_xdp_free(), which does not deal gracefully with that.
In fact, what happens is quite special. The page refcounts start as 1.
enetc_flip_rx_buff() figures they're reusable, transfers these
rx_swbd->page pointers to a different rx_swbd in enetc_reuse_page(), and
bumps the refcount to 2. When xdp_do_redirect() later returns an error,
we call the no-op enetc_xdp_free(), but we still haven't lost the
reference to that page. A copy of it is still at rx_ring->next_to_alloc,
but that has refcount 2 (and there are no concurrent owners of it in
flight, to drop the refcount). What really kills the system is when
we'll flip the rx_swbd->page the second time around. With an updated
refcount of 2, the page will not be reusable and we'll really leak it.
Then enetc_new_page() will have to allocate more pages, which will then
eventually leak again on further errors from xdp_do_redirect().
The problem, summarized, is that we zeroize rx_swbd->page before we're
completely done with it, and this makes it impossible for the error path
to do something with it.
Since the packet is potentially multi-buffer and therefore the
rx_swbd->page is potentially an array, manual passing of the old
pointers between enetc_flip_rx_buff() and enetc_xdp_free() is a bit
difficult.
For the sake of going with a simple solution, we accept the possibility
of racing with xdp_do_redirect(), and we move the flip procedure to
execute only on the redirect success path. By racing, I mean that the
page may be deemed as not reusable by enetc (having a refcount of 0),
but there will be no leak in that case, either.
Once we accept that, we have something better to do with buffers on
XDP_REDIRECT failure. Since we haven't performed half-page flipping yet,
we won't, either (and this way, we can avoid enetc_xdp_free()
completely, which gives the entire page to the slab allocator).
Instead, we'll call enetc_xdp_drop(), which will recycle this half of
the buffer back to the RX ring.
Fixes: 9d2b68cc108d ("net: enetc: add support for XDP_REDIRECT")
Suggested-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221213001908.2347046-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/freescale/enetc/enetc.c | 35 +++++---------------
1 file changed, 8 insertions(+), 27 deletions(-)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index 222a250fba84..adccb14c1644 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -1220,23 +1220,6 @@ static void enetc_xdp_drop(struct enetc_bdr *rx_ring, int rx_ring_first,
rx_ring->stats.xdp_drops++;
}
-static void enetc_xdp_free(struct enetc_bdr *rx_ring, int rx_ring_first,
- int rx_ring_last)
-{
- while (rx_ring_first != rx_ring_last) {
- struct enetc_rx_swbd *rx_swbd = &rx_ring->rx_swbd[rx_ring_first];
-
- if (rx_swbd->page) {
- dma_unmap_page(rx_ring->dev, rx_swbd->dma, PAGE_SIZE,
- rx_swbd->dir);
- __free_page(rx_swbd->page);
- rx_swbd->page = NULL;
- }
- enetc_bdr_idx_inc(rx_ring, &rx_ring_first);
- }
- rx_ring->stats.xdp_redirect_failures++;
-}
-
static int enetc_clean_rx_ring_xdp(struct enetc_bdr *rx_ring,
struct napi_struct *napi, int work_limit,
struct bpf_prog *prog)
@@ -1258,8 +1241,8 @@ static int enetc_clean_rx_ring_xdp(struct enetc_bdr *rx_ring,
int orig_i, orig_cleaned_cnt;
struct xdp_buff xdp_buff;
struct sk_buff *skb;
- int tmp_orig_i, err;
u32 bd_status;
+ int err;
rxbd = enetc_rxbd(rx_ring, i);
bd_status = le32_to_cpu(rxbd->r.lstatus);
@@ -1346,18 +1329,16 @@ static int enetc_clean_rx_ring_xdp(struct enetc_bdr *rx_ring,
break;
}
- tmp_orig_i = orig_i;
-
- while (orig_i != i) {
- enetc_flip_rx_buff(rx_ring,
- &rx_ring->rx_swbd[orig_i]);
- enetc_bdr_idx_inc(rx_ring, &orig_i);
- }
-
err = xdp_do_redirect(rx_ring->ndev, &xdp_buff, prog);
if (unlikely(err)) {
- enetc_xdp_free(rx_ring, tmp_orig_i, i);
+ enetc_xdp_drop(rx_ring, orig_i, i);
+ rx_ring->stats.xdp_redirect_failures++;
} else {
+ while (orig_i != i) {
+ enetc_flip_rx_buff(rx_ring,
+ &rx_ring->rx_swbd[orig_i]);
+ enetc_bdr_idx_inc(rx_ring, &orig_i);
+ }
xdp_redirect_frm_cnt++;
rx_ring->stats.xdp_redirect++;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 590/731] nfc: pn533: Clear nfc_target before being used
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (588 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 589/731] net: enetc: avoid buffer leaks on xdp_do_redirect() failure Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 591/731] unix: Fix race in SOCK_SEQPACKETs unix_dgram_sendmsg() Greg Kroah-Hartman
` (151 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Minsuk Kang, Krzysztof Kozlowski,
Jakub Kicinski, Sasha Levin
From: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
[ Upstream commit 9f28157778ede0d4f183f7ab3b46995bb400abbe ]
Fix a slab-out-of-bounds read that occurs in nla_put() called from
nfc_genl_send_target() when target->sensb_res_len, which is duplicated
from an nfc_target in pn533, is too large as the nfc_target is not
properly initialized and retains garbage values. Clear nfc_targets with
memset() before they are used.
Found by a modified version of syzkaller.
BUG: KASAN: slab-out-of-bounds in nla_put
Call Trace:
memcpy
nla_put
nfc_genl_dump_targets
genl_lock_dumpit
netlink_dump
__netlink_dump_start
genl_family_rcv_msg_dumpit
genl_rcv_msg
netlink_rcv_skb
genl_rcv
netlink_unicast
netlink_sendmsg
sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64
Fixes: 673088fb42d0 ("NFC: pn533: Send ATR_REQ directly for active device detection")
Fixes: 361f3cb7f9cf ("NFC: DEP link hook implementation for pn533")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221214015139.119673-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nfc/pn533/pn533.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/nfc/pn533/pn533.c b/drivers/nfc/pn533/pn533.c
index 6dc0af63440f..939d27652a4c 100644
--- a/drivers/nfc/pn533/pn533.c
+++ b/drivers/nfc/pn533/pn533.c
@@ -1297,6 +1297,8 @@ static int pn533_poll_dep_complete(struct pn533 *dev, void *arg,
if (IS_ERR(resp))
return PTR_ERR(resp);
+ memset(&nfc_target, 0, sizeof(struct nfc_target));
+
rsp = (struct pn533_cmd_jump_dep_response *)resp->data;
rc = rsp->status & PN533_CMD_RET_MASK;
@@ -1928,6 +1930,8 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg,
dev_dbg(dev->dev, "Creating new target\n");
+ memset(&nfc_target, 0, sizeof(struct nfc_target));
+
nfc_target.supported_protocols = NFC_PROTO_NFC_DEP_MASK;
nfc_target.nfcid1_len = 10;
memcpy(nfc_target.nfcid1, rsp->nfcid3t, nfc_target.nfcid1_len);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 591/731] unix: Fix race in SOCK_SEQPACKETs unix_dgram_sendmsg()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (589 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 590/731] nfc: pn533: Clear nfc_target before being used Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 592/731] r6040: Fix kmemleak in probe and remove Greg Kroah-Hartman
` (150 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kirill Tkhai, Paolo Abeni, Sasha Levin
From: Kirill Tkhai <tkhai@ya.ru>
[ Upstream commit 3ff8bff704f4de125dca2262e5b5b963a3da1d87 ]
There is a race resulting in alive SOCK_SEQPACKET socket
may change its state from TCP_ESTABLISHED to TCP_CLOSE:
unix_release_sock(peer) unix_dgram_sendmsg(sk)
sock_orphan(peer)
sock_set_flag(peer, SOCK_DEAD)
sock_alloc_send_pskb()
if !(sk->sk_shutdown & SEND_SHUTDOWN)
OK
if sock_flag(peer, SOCK_DEAD)
sk->sk_state = TCP_CLOSE
sk->sk_shutdown = SHUTDOWN_MASK
After that socket sk remains almost normal: it is able to connect, listen, accept
and recvmsg, while it can't sendmsg.
Since this is the only possibility for alive SOCK_SEQPACKET to change
the state in such way, we should better fix this strange and potentially
danger corner case.
Note, that we will return EPIPE here like this is normally done in sock_alloc_send_pskb().
Originally used ECONNREFUSED looks strange, since it's strange to return
a specific retval in dependence of race in kernel, when user can't affect on this.
Also, move TCP_CLOSE assignment for SOCK_DGRAM sockets under state lock
to fix race with unix_dgram_connect():
unix_dgram_connect(other) unix_dgram_sendmsg(sk)
unix_peer(sk) = NULL
unix_state_unlock(sk)
unix_state_double_lock(sk, other)
sk->sk_state = TCP_ESTABLISHED
unix_peer(sk) = other
unix_state_double_unlock(sk, other)
sk->sk_state = TCP_CLOSED
This patch fixes both of these races.
Fixes: 83301b5367a9 ("af_unix: Set TCP_ESTABLISHED for datagram sockets too")
Signed-off-by: Kirill Tkhai <tkhai@ya.ru>
Link: https://lore.kernel.org/r/135fda25-22d5-837a-782b-ceee50e19844@ya.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/unix/af_unix.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 545823c1d5ed..0a59a00cb581 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1865,13 +1865,20 @@ static int unix_dgram_sendmsg(struct socket *sock, struct msghdr *msg,
unix_state_lock(sk);
err = 0;
- if (unix_peer(sk) == other) {
+ if (sk->sk_type == SOCK_SEQPACKET) {
+ /* We are here only when racing with unix_release_sock()
+ * is clearing @other. Never change state to TCP_CLOSE
+ * unlike SOCK_DGRAM wants.
+ */
+ unix_state_unlock(sk);
+ err = -EPIPE;
+ } else if (unix_peer(sk) == other) {
unix_peer(sk) = NULL;
unix_dgram_peer_wake_disconnect_wakeup(sk, other);
+ sk->sk_state = TCP_CLOSE;
unix_state_unlock(sk);
- sk->sk_state = TCP_CLOSE;
unix_dgram_disconnected(sk, other);
sock_put(other);
err = -ECONNREFUSED;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 592/731] r6040: Fix kmemleak in probe and remove
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (590 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 591/731] unix: Fix race in SOCK_SEQPACKETs unix_dgram_sendmsg() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 593/731] blk-iocost: simplify ioc_name Greg Kroah-Hartman
` (149 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Li Zetao, Leon Romanovsky,
Paolo Abeni, Sasha Levin
From: Li Zetao <lizetao1@huawei.com>
[ Upstream commit 7e43039a49c2da45edc1d9d7c9ede4003ab45a5f ]
There is a memory leaks reported by kmemleak:
unreferenced object 0xffff888116111000 (size 2048):
comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s)
hex dump (first 32 bytes):
00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................
08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffff827e20ee>] phy_device_create+0x4e/0x90
[<ffffffff827e6072>] get_phy_device+0xd2/0x220
[<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0
[<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0
[<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040]
...
The problem occurs in probe process as follows:
r6040_init_one:
mdiobus_register
mdiobus_scan <- alloc and register phy_device,
the reference count of phy_device is 3
r6040_mii_probe
phy_connect <- connect to the first phy_device,
so the reference count of the first
phy_device is 4, others are 3
register_netdev <- fault inject succeeded, goto error handling path
// error handling path
err_out_mdio_unregister:
mdiobus_unregister(lp->mii_bus);
err_out_mdio:
mdiobus_free(lp->mii_bus); <- the reference count of the first
phy_device is 1, it is not released
and other phy_devices are released
// similarly, the remove process also has the same problem
The root cause is traced to the phy_device is not disconnected when
removes one r6040 device in r6040_remove_one() or on error handling path
after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet
device is connected to the first PHY device of mii_bus, in order to
notify the connected driver when the link status changes, which is the
default behavior of the PHY infrastructure to handle everything.
Therefore the phy_device should be disconnected when removes one r6040
device or on error handling path.
Fix it by adding phy_disconnect() when removes one r6040 device or on
error handling path after r6040_mii probed successfully.
Fixes: 3831861b4ad8 ("r6040: implement phylib")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221213125614.927754-1-lizetao1@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/rdc/r6040.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c
index 01ef5efd7bc2..5a8a6977ec9a 100644
--- a/drivers/net/ethernet/rdc/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c
@@ -1159,10 +1159,12 @@ static int r6040_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
err = register_netdev(dev);
if (err) {
dev_err(&pdev->dev, "Failed to register net device\n");
- goto err_out_mdio_unregister;
+ goto err_out_phy_disconnect;
}
return 0;
+err_out_phy_disconnect:
+ phy_disconnect(dev->phydev);
err_out_mdio_unregister:
mdiobus_unregister(lp->mii_bus);
err_out_mdio:
@@ -1186,6 +1188,7 @@ static void r6040_remove_one(struct pci_dev *pdev)
struct r6040_private *lp = netdev_priv(dev);
unregister_netdev(dev);
+ phy_disconnect(dev->phydev);
mdiobus_unregister(lp->mii_bus);
mdiobus_free(lp->mii_bus);
netif_napi_del(&lp->napi);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 593/731] blk-iocost: simplify ioc_name
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (591 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 592/731] r6040: Fix kmemleak in probe and remove Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 594/731] igc: Enhance Qbv scheduling by using first flag bit Greg Kroah-Hartman
` (148 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christoph Hellwig, Andreas Herrmann,
Tejun Heo, Jens Axboe, Sasha Levin
From: Christoph Hellwig <hch@lst.de>
[ Upstream commit 9df3e65139b923dfe98f76b7057882c7afb2d3e4 ]
Just directly dereference the disk name instead of going through multiple
hoops to find the same value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: d36a9ea5e776 ("block: fix use-after-free of q->q_usage_counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-iocost.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/block/blk-iocost.c b/block/blk-iocost.c
index 069193dee95b..f5b501888ba4 100644
--- a/block/blk-iocost.c
+++ b/block/blk-iocost.c
@@ -665,17 +665,13 @@ static struct ioc *q_to_ioc(struct request_queue *q)
return rqos_to_ioc(rq_qos_id(q, RQ_QOS_COST));
}
-static const char *q_name(struct request_queue *q)
-{
- if (blk_queue_registered(q))
- return kobject_name(q->kobj.parent);
- else
- return "<unknown>";
-}
-
static const char __maybe_unused *ioc_name(struct ioc *ioc)
{
- return q_name(ioc->rqos.q);
+ struct gendisk *disk = ioc->rqos.q->disk;
+
+ if (!disk)
+ return "<unknown>";
+ return disk->disk_name;
}
static struct ioc_gq *pd_to_iocg(struct blkg_policy_data *pd)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 594/731] igc: Enhance Qbv scheduling by using first flag bit
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (592 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 593/731] blk-iocost: simplify ioc_name Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 595/731] igc: Use strict cycles for Qbv scheduling Greg Kroah-Hartman
` (147 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vinicius Costa Gomes,
Aravindhan Gunasekaran, Muhammad Husaini Zulkifli, Malli C,
Naama Meir, Tony Nguyen, Sasha Levin
From: Vinicius Costa Gomes <vinicius.gomes@intel.com>
[ Upstream commit db0b124f02ba68de6517ac303d431af220ccfe9f ]
The I225 hardware has a limitation that packets can only be scheduled
in the [0, cycle-time] interval. So, scheduling a packet to the start
of the next cycle doesn't usually work.
To overcome this, we use the Transmit Descriptor first flag to indicates
that a packet should be the first packet (from a queue) in a cycle
according to the section 7.5.2.9.3.4 The First Packet on Each QBV Cycle
in Intel Discrete I225/6 User Manual.
But this only works if there was any packet from that queue during the
current cycle, to avoid this issue, we issue an empty packet if that's
not the case. Also require one more descriptor to be available, to take
into account the empty packet that might be issued.
Test Setup:
Talker: Use l2_tai to generate the launchtime into packet load.
Listener: Use timedump.c to compute the delta between packet arrival
and LaunchTime packet payload.
Test Result:
Before:
1666000610127300000,1666000610127300096,96,621273
1666000610127400000,1666000610127400192,192,621274
1666000610127500000,1666000610127500032,32,621275
1666000610127600000,1666000610127600128,128,621276
1666000610127700000,1666000610127700224,224,621277
1666000610127800000,1666000610127800064,64,621278
1666000610127900000,1666000610127900160,160,621279
1666000610128000000,1666000610128000000,0,621280
1666000610128100000,1666000610128100096,96,621281
1666000610128200000,1666000610128200192,192,621282
1666000610128300000,1666000610128300032,32,621283
1666000610128400000,1666000610128301056,-98944,621284
1666000610128500000,1666000610128302080,-197920,621285
1666000610128600000,1666000610128302848,-297152,621286
1666000610128700000,1666000610128303872,-396128,621287
1666000610128800000,1666000610128304896,-495104,621288
1666000610128900000,1666000610128305664,-594336,621289
1666000610129000000,1666000610128306688,-693312,621290
1666000610129100000,1666000610128307712,-792288,621291
1666000610129200000,1666000610128308480,-891520,621292
1666000610129300000,1666000610128309504,-990496,621293
1666000610129400000,1666000610128310528,-1089472,621294
1666000610129500000,1666000610128311296,-1188704,621295
1666000610129600000,1666000610128312320,-1287680,621296
1666000610129700000,1666000610128313344,-1386656,621297
1666000610129800000,1666000610128314112,-1485888,621298
1666000610129900000,1666000610128315136,-1584864,621299
1666000610130000000,1666000610128316160,-1683840,621300
1666000610130100000,1666000610128316928,-1783072,621301
1666000610130200000,1666000610128317952,-1882048,621302
1666000610130300000,1666000610128318976,-1981024,621303
1666000610130400000,1666000610128319744,-2080256,621304
1666000610130500000,1666000610128320768,-2179232,621305
1666000610130600000,1666000610128321792,-2278208,621306
1666000610130700000,1666000610128322816,-2377184,621307
1666000610130800000,1666000610128323584,-2476416,621308
1666000610130900000,1666000610128324608,-2575392,621309
1666000610131000000,1666000610128325632,-2674368,621310
1666000610131100000,1666000610128326400,-2773600,621311
1666000610131200000,1666000610128327424,-2872576,621312
1666000610131300000,1666000610128328448,-2971552,621313
1666000610131400000,1666000610128329216,-3070784,621314
1666000610131500000,1666000610131500032,32,621315
1666000610131600000,1666000610131600128,128,621316
1666000610131700000,1666000610131700224,224,621317
After:
1666073510646200000,1666073510646200064,64,2676462
1666073510646300000,1666073510646300160,160,2676463
1666073510646400000,1666073510646400256,256,2676464
1666073510646500000,1666073510646500096,96,2676465
1666073510646600000,1666073510646600192,192,2676466
1666073510646700000,1666073510646700032,32,2676467
1666073510646800000,1666073510646800128,128,2676468
1666073510646900000,1666073510646900224,224,2676469
1666073510647000000,1666073510647000064,64,2676470
1666073510647100000,1666073510647100160,160,2676471
1666073510647200000,1666073510647200256,256,2676472
1666073510647300000,1666073510647300096,96,2676473
1666073510647400000,1666073510647400192,192,2676474
1666073510647500000,1666073510647500032,32,2676475
1666073510647600000,1666073510647600128,128,2676476
1666073510647700000,1666073510647700224,224,2676477
1666073510647800000,1666073510647800064,64,2676478
1666073510647900000,1666073510647900160,160,2676479
1666073510648000000,1666073510648000000,0,2676480
1666073510648100000,1666073510648100096,96,2676481
1666073510648200000,1666073510648200192,192,2676482
1666073510648300000,1666073510648300032,32,2676483
1666073510648400000,1666073510648400128,128,2676484
1666073510648500000,1666073510648500224,224,2676485
1666073510648600000,1666073510648600064,64,2676486
1666073510648700000,1666073510648700160,160,2676487
1666073510648800000,1666073510648800000,0,2676488
1666073510648900000,1666073510648900096,96,2676489
1666073510649000000,1666073510649000192,192,2676490
1666073510649100000,1666073510649100032,32,2676491
1666073510649200000,1666073510649200128,128,2676492
1666073510649300000,1666073510649300224,224,2676493
1666073510649400000,1666073510649400064,64,2676494
1666073510649500000,1666073510649500160,160,2676495
1666073510649600000,1666073510649600000,0,2676496
1666073510649700000,1666073510649700096,96,2676497
1666073510649800000,1666073510649800192,192,2676498
1666073510649900000,1666073510649900032,32,2676499
1666073510650000000,1666073510650000128,128,2676500
Fixes: 82faa9b79950 ("igc: Add support for ETF offloading")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Co-developed-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com>
Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com>
Co-developed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Malli C <mallikarjuna.chilakala@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igc/igc.h | 2 +
drivers/net/ethernet/intel/igc/igc_defines.h | 2 +
drivers/net/ethernet/intel/igc/igc_main.c | 176 ++++++++++++++++---
3 files changed, 151 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index 3e386c38d016..b69373d67e2d 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -94,6 +94,8 @@ struct igc_ring {
u8 queue_index; /* logical index of the ring*/
u8 reg_idx; /* physical index of the ring */
bool launchtime_enable; /* true if LaunchTime is enabled */
+ ktime_t last_tx_cycle; /* end of the cycle with a launchtime transmission */
+ ktime_t last_ff_cycle; /* Last cycle with an active first flag */
u32 start_time;
u32 end_time;
diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h
index a4bbee748798..f171bc99e58c 100644
--- a/drivers/net/ethernet/intel/igc/igc_defines.h
+++ b/drivers/net/ethernet/intel/igc/igc_defines.h
@@ -324,6 +324,8 @@
#define IGC_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
#define IGC_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+#define IGC_ADVTXD_TSN_CNTX_FIRST 0x00000080
+
/* Transmit Control */
#define IGC_TCTL_EN 0x00000002 /* enable Tx */
#define IGC_TCTL_PSP 0x00000008 /* pad short packets */
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 2a84f57ea68b..af55e2f62e47 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -999,25 +999,118 @@ static int igc_write_mc_addr_list(struct net_device *netdev)
return netdev_mc_count(netdev);
}
-static __le32 igc_tx_launchtime(struct igc_adapter *adapter, ktime_t txtime)
+static __le32 igc_tx_launchtime(struct igc_ring *ring, ktime_t txtime,
+ bool *first_flag, bool *insert_empty)
{
+ struct igc_adapter *adapter = netdev_priv(ring->netdev);
ktime_t cycle_time = adapter->cycle_time;
ktime_t base_time = adapter->base_time;
+ ktime_t now = ktime_get_clocktai();
+ ktime_t baset_est, end_of_cycle;
u32 launchtime;
+ s64 n;
- /* FIXME: when using ETF together with taprio, we may have a
- * case where 'delta' is larger than the cycle_time, this may
- * cause problems if we don't read the current value of
- * IGC_BASET, as the value writen into the launchtime
- * descriptor field may be misinterpreted.
+ n = div64_s64(ktime_sub_ns(now, base_time), cycle_time);
+
+ baset_est = ktime_add_ns(base_time, cycle_time * (n));
+ end_of_cycle = ktime_add_ns(baset_est, cycle_time);
+
+ if (ktime_compare(txtime, end_of_cycle) >= 0) {
+ if (baset_est != ring->last_ff_cycle) {
+ *first_flag = true;
+ ring->last_ff_cycle = baset_est;
+
+ if (ktime_compare(txtime, ring->last_tx_cycle) > 0)
+ *insert_empty = true;
+ }
+ }
+
+ /* Introducing a window at end of cycle on which packets
+ * potentially not honor launchtime. Window of 5us chosen
+ * considering software update the tail pointer and packets
+ * are dma'ed to packet buffer.
*/
- div_s64_rem(ktime_sub_ns(txtime, base_time), cycle_time, &launchtime);
+ if ((ktime_sub_ns(end_of_cycle, now) < 5 * NSEC_PER_USEC))
+ netdev_warn(ring->netdev, "Packet with txtime=%llu may not be honoured\n",
+ txtime);
+
+ ring->last_tx_cycle = end_of_cycle;
+
+ launchtime = ktime_sub_ns(txtime, baset_est);
+ if (launchtime > 0)
+ div_s64_rem(launchtime, cycle_time, &launchtime);
+ else
+ launchtime = 0;
return cpu_to_le32(launchtime);
}
+static int igc_init_empty_frame(struct igc_ring *ring,
+ struct igc_tx_buffer *buffer,
+ struct sk_buff *skb)
+{
+ unsigned int size;
+ dma_addr_t dma;
+
+ size = skb_headlen(skb);
+
+ dma = dma_map_single(ring->dev, skb->data, size, DMA_TO_DEVICE);
+ if (dma_mapping_error(ring->dev, dma)) {
+ netdev_err_once(ring->netdev, "Failed to map DMA for TX\n");
+ return -ENOMEM;
+ }
+
+ buffer->skb = skb;
+ buffer->protocol = 0;
+ buffer->bytecount = skb->len;
+ buffer->gso_segs = 1;
+ buffer->time_stamp = jiffies;
+ dma_unmap_len_set(buffer, len, skb->len);
+ dma_unmap_addr_set(buffer, dma, dma);
+
+ return 0;
+}
+
+static int igc_init_tx_empty_descriptor(struct igc_ring *ring,
+ struct sk_buff *skb,
+ struct igc_tx_buffer *first)
+{
+ union igc_adv_tx_desc *desc;
+ u32 cmd_type, olinfo_status;
+ int err;
+
+ if (!igc_desc_unused(ring))
+ return -EBUSY;
+
+ err = igc_init_empty_frame(ring, first, skb);
+ if (err)
+ return err;
+
+ cmd_type = IGC_ADVTXD_DTYP_DATA | IGC_ADVTXD_DCMD_DEXT |
+ IGC_ADVTXD_DCMD_IFCS | IGC_TXD_DCMD |
+ first->bytecount;
+ olinfo_status = first->bytecount << IGC_ADVTXD_PAYLEN_SHIFT;
+
+ desc = IGC_TX_DESC(ring, ring->next_to_use);
+ desc->read.cmd_type_len = cpu_to_le32(cmd_type);
+ desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+ desc->read.buffer_addr = cpu_to_le64(dma_unmap_addr(first, dma));
+
+ netdev_tx_sent_queue(txring_txq(ring), skb->len);
+
+ first->next_to_watch = desc;
+
+ ring->next_to_use++;
+ if (ring->next_to_use == ring->count)
+ ring->next_to_use = 0;
+
+ return 0;
+}
+
+#define IGC_EMPTY_FRAME_SIZE 60
+
static void igc_tx_ctxtdesc(struct igc_ring *tx_ring,
- struct igc_tx_buffer *first,
+ __le32 launch_time, bool first_flag,
u32 vlan_macip_lens, u32 type_tucmd,
u32 mss_l4len_idx)
{
@@ -1036,26 +1129,17 @@ static void igc_tx_ctxtdesc(struct igc_ring *tx_ring,
if (test_bit(IGC_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
mss_l4len_idx |= tx_ring->reg_idx << 4;
+ if (first_flag)
+ mss_l4len_idx |= IGC_ADVTXD_TSN_CNTX_FIRST;
+
context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd);
context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
-
- /* We assume there is always a valid Tx time available. Invalid times
- * should have been handled by the upper layers.
- */
- if (tx_ring->launchtime_enable) {
- struct igc_adapter *adapter = netdev_priv(tx_ring->netdev);
- ktime_t txtime = first->skb->tstamp;
-
- skb_txtime_consumed(first->skb);
- context_desc->launch_time = igc_tx_launchtime(adapter,
- txtime);
- } else {
- context_desc->launch_time = 0;
- }
+ context_desc->launch_time = launch_time;
}
-static void igc_tx_csum(struct igc_ring *tx_ring, struct igc_tx_buffer *first)
+static void igc_tx_csum(struct igc_ring *tx_ring, struct igc_tx_buffer *first,
+ __le32 launch_time, bool first_flag)
{
struct sk_buff *skb = first->skb;
u32 vlan_macip_lens = 0;
@@ -1095,7 +1179,8 @@ static void igc_tx_csum(struct igc_ring *tx_ring, struct igc_tx_buffer *first)
vlan_macip_lens |= skb_network_offset(skb) << IGC_ADVTXD_MACLEN_SHIFT;
vlan_macip_lens |= first->tx_flags & IGC_TX_FLAGS_VLAN_MASK;
- igc_tx_ctxtdesc(tx_ring, first, vlan_macip_lens, type_tucmd, 0);
+ igc_tx_ctxtdesc(tx_ring, launch_time, first_flag,
+ vlan_macip_lens, type_tucmd, 0);
}
static int __igc_maybe_stop_tx(struct igc_ring *tx_ring, const u16 size)
@@ -1319,6 +1404,7 @@ static int igc_tx_map(struct igc_ring *tx_ring,
static int igc_tso(struct igc_ring *tx_ring,
struct igc_tx_buffer *first,
+ __le32 launch_time, bool first_flag,
u8 *hdr_len)
{
u32 vlan_macip_lens, type_tucmd, mss_l4len_idx;
@@ -1405,8 +1491,8 @@ static int igc_tso(struct igc_ring *tx_ring,
vlan_macip_lens |= (ip.hdr - skb->data) << IGC_ADVTXD_MACLEN_SHIFT;
vlan_macip_lens |= first->tx_flags & IGC_TX_FLAGS_VLAN_MASK;
- igc_tx_ctxtdesc(tx_ring, first, vlan_macip_lens,
- type_tucmd, mss_l4len_idx);
+ igc_tx_ctxtdesc(tx_ring, launch_time, first_flag,
+ vlan_macip_lens, type_tucmd, mss_l4len_idx);
return 1;
}
@@ -1414,11 +1500,14 @@ static int igc_tso(struct igc_ring *tx_ring,
static netdev_tx_t igc_xmit_frame_ring(struct sk_buff *skb,
struct igc_ring *tx_ring)
{
+ bool first_flag = false, insert_empty = false;
u16 count = TXD_USE_COUNT(skb_headlen(skb));
__be16 protocol = vlan_get_protocol(skb);
struct igc_tx_buffer *first;
+ __le32 launch_time = 0;
u32 tx_flags = 0;
unsigned short f;
+ ktime_t txtime;
u8 hdr_len = 0;
int tso = 0;
@@ -1432,11 +1521,40 @@ static netdev_tx_t igc_xmit_frame_ring(struct sk_buff *skb,
count += TXD_USE_COUNT(skb_frag_size(
&skb_shinfo(skb)->frags[f]));
- if (igc_maybe_stop_tx(tx_ring, count + 3)) {
+ if (igc_maybe_stop_tx(tx_ring, count + 5)) {
/* this is a hard error */
return NETDEV_TX_BUSY;
}
+ if (!tx_ring->launchtime_enable)
+ goto done;
+
+ txtime = skb->tstamp;
+ skb->tstamp = ktime_set(0, 0);
+ launch_time = igc_tx_launchtime(tx_ring, txtime, &first_flag, &insert_empty);
+
+ if (insert_empty) {
+ struct igc_tx_buffer *empty_info;
+ struct sk_buff *empty;
+ void *data;
+
+ empty_info = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
+ empty = alloc_skb(IGC_EMPTY_FRAME_SIZE, GFP_ATOMIC);
+ if (!empty)
+ goto done;
+
+ data = skb_put(empty, IGC_EMPTY_FRAME_SIZE);
+ memset(data, 0, IGC_EMPTY_FRAME_SIZE);
+
+ igc_tx_ctxtdesc(tx_ring, 0, false, 0, 0, 0);
+
+ if (igc_init_tx_empty_descriptor(tx_ring,
+ empty,
+ empty_info) < 0)
+ dev_kfree_skb_any(empty);
+ }
+
+done:
/* record the location of the first descriptor for this packet */
first = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
first->type = IGC_TX_BUFFER_TYPE_SKB;
@@ -1473,11 +1591,11 @@ static netdev_tx_t igc_xmit_frame_ring(struct sk_buff *skb,
first->tx_flags = tx_flags;
first->protocol = protocol;
- tso = igc_tso(tx_ring, first, &hdr_len);
+ tso = igc_tso(tx_ring, first, launch_time, first_flag, &hdr_len);
if (tso < 0)
goto out_drop;
else if (!tso)
- igc_tx_csum(tx_ring, first);
+ igc_tx_csum(tx_ring, first, launch_time, first_flag);
igc_tx_map(tx_ring, first, hdr_len);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 595/731] igc: Use strict cycles for Qbv scheduling
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (593 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 594/731] igc: Enhance Qbv scheduling by using first flag bit Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 596/731] igc: Add checking for basetime less than zero Greg Kroah-Hartman
` (146 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vinicius Costa Gomes,
Aravindhan Gunasekaran, Muhammad Husaini Zulkifli, Naama Meir,
Tony Nguyen, Sasha Levin
From: Vinicius Costa Gomes <vinicius.gomes@intel.com>
[ Upstream commit d8f45be01dd9381065a3778a579385249ed011dc ]
Configuring strict cycle mode in the controller forces more well
behaved transmissions when taprio is offloaded.
When set this strict_cycle and strict_end, transmission is not
enabled if the whole packet cannot be completed before end of
the Qbv cycle.
Fixes: 82faa9b79950 ("igc: Add support for ETF offloading")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igc/igc_tsn.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c
index 0fce22de2ab8..4a019954cadb 100644
--- a/drivers/net/ethernet/intel/igc/igc_tsn.c
+++ b/drivers/net/ethernet/intel/igc/igc_tsn.c
@@ -110,15 +110,8 @@ static int igc_tsn_enable_offload(struct igc_adapter *adapter)
wr32(IGC_STQT(i), ring->start_time);
wr32(IGC_ENDQT(i), ring->end_time);
- if (adapter->base_time) {
- /* If we have a base_time we are in "taprio"
- * mode and we need to be strict about the
- * cycles: only transmit a packet if it can be
- * completed during that cycle.
- */
- txqctl |= IGC_TXQCTL_STRICT_CYCLE |
- IGC_TXQCTL_STRICT_END;
- }
+ txqctl |= IGC_TXQCTL_STRICT_CYCLE |
+ IGC_TXQCTL_STRICT_END;
if (ring->launchtime_enable)
txqctl |= IGC_TXQCTL_QUEUE_MODE_LAUNCHT;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 596/731] igc: Add checking for basetime less than zero
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (594 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 595/731] igc: Use strict cycles for Qbv scheduling Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 597/731] igc: allow BaseTime 0 enrollment for Qbv Greg Kroah-Hartman
` (145 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Muhammad Husaini Zulkifli,
Naama Meir, Tony Nguyen, Sasha Levin
From: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
[ Upstream commit 3b61764fb49a6e147ac90d71dccdddc9d5508ba1 ]
Using the tc qdisc command, the user can set basetime to any value.
Checking should be done on the driver's side to prevent registering
basetime values that are less than zero.
Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igc/igc_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index af55e2f62e47..26dd710fba8f 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -5984,6 +5984,9 @@ static int igc_save_qbv_schedule(struct igc_adapter *adapter,
if (!qopt->enable)
return igc_tsn_clear_schedule(adapter);
+ if (qopt->base_time < 0)
+ return -ERANGE;
+
if (adapter->base_time)
return -EALREADY;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 597/731] igc: allow BaseTime 0 enrollment for Qbv
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (595 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 596/731] igc: Add checking for basetime less than zero Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 598/731] igc: recalculate Qbv end_time by considering cycle time Greg Kroah-Hartman
` (144 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Muhammad Husaini Zulkifli,
Tan Tee Min, Naama Meir, Tony Nguyen, Sasha Levin
From: Tan Tee Min <tee.min.tan@linux.intel.com>
[ Upstream commit e17090eb24944fbbe1f24d9f336d7bad4fbe47e8 ]
Introduce qbv_enable flag in igc_adapter struct to store the Qbv on/off.
So this allow the BaseTime to enroll with zero value.
Fixes: 61572d5f8f91 ("igc: Simplify TSN flags handling")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igc/igc.h | 1 +
drivers/net/ethernet/intel/igc/igc_main.c | 2 ++
drivers/net/ethernet/intel/igc/igc_tsn.c | 2 +-
3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index b69373d67e2d..66678cd72a6c 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -184,6 +184,7 @@ struct igc_adapter {
ktime_t base_time;
ktime_t cycle_time;
+ bool qbv_enable;
/* OS defined structs */
struct pci_dev *pdev;
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 26dd710fba8f..f06b67ae3602 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -5981,6 +5981,8 @@ static int igc_save_qbv_schedule(struct igc_adapter *adapter,
u32 start_time = 0, end_time = 0;
size_t n;
+ adapter->qbv_enable = qopt->enable;
+
if (!qopt->enable)
return igc_tsn_clear_schedule(adapter);
diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c
index 4a019954cadb..356c7455c5ce 100644
--- a/drivers/net/ethernet/intel/igc/igc_tsn.c
+++ b/drivers/net/ethernet/intel/igc/igc_tsn.c
@@ -36,7 +36,7 @@ static unsigned int igc_tsn_new_flags(struct igc_adapter *adapter)
{
unsigned int new_flags = adapter->flags & ~IGC_FLAG_TSN_ANY_ENABLED;
- if (adapter->base_time)
+ if (adapter->qbv_enable)
new_flags |= IGC_FLAG_TSN_QBV_ENABLED;
if (is_any_launchtime(adapter))
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 598/731] igc: recalculate Qbv end_time by considering cycle time
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (596 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 597/731] igc: allow BaseTime 0 enrollment for Qbv Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 599/731] igc: Lift TAPRIO schedule restriction Greg Kroah-Hartman
` (143 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tan Tee Min,
Muhammad Husaini Zulkifli, Naama Meir, Tony Nguyen, Sasha Levin
From: Tan Tee Min <tee.min.tan@linux.intel.com>
[ Upstream commit 6d05251d537a4d3835959a8cdd8cbbbdcdc0c904 ]
Qbv users can specify a cycle time that is not equal to the total GCL
intervals. Hence, recalculation is necessary here to exclude the time
interval that exceeds the cycle time. As those GCL which exceeds the
cycle time will be truncated.
According to IEEE Std. 802.1Q-2018 section 8.6.9.2, once the end of
the list is reached, it will switch to the END_OF_CYCLE state and
leave the gates in the same state until the next cycle is started.
Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading")
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igc/igc_main.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index f06b67ae3602..df78aa4fb44b 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -6007,6 +6007,21 @@ static int igc_save_qbv_schedule(struct igc_adapter *adapter,
end_time += e->interval;
+ /* If any of the conditions below are true, we need to manually
+ * control the end time of the cycle.
+ * 1. Qbv users can specify a cycle time that is not equal
+ * to the total GCL intervals. Hence, recalculation is
+ * necessary here to exclude the time interval that
+ * exceeds the cycle time.
+ * 2. According to IEEE Std. 802.1Q-2018 section 8.6.9.2,
+ * once the end of the list is reached, it will switch
+ * to the END_OF_CYCLE state and leave the gates in the
+ * same state until the next cycle is started.
+ */
+ if (end_time > adapter->cycle_time ||
+ n + 1 == qopt->num_entries)
+ end_time = adapter->cycle_time;
+
for (i = 0; i < adapter->num_tx_queues; i++) {
struct igc_ring *ring = adapter->tx_ring[i];
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 599/731] igc: Lift TAPRIO schedule restriction
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (597 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 598/731] igc: recalculate Qbv end_time by considering cycle time Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 600/731] igc: Set Qbv start_time and end_time to end_time if not being configured in GCL Greg Kroah-Hartman
` (142 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kurt Kanzenbach,
Vinicius Costa Gomes, Naama Meir, Tony Nguyen, Sasha Levin
From: Kurt Kanzenbach <kurt@linutronix.de>
[ Upstream commit a5fd39464a4081ce11c801d7e20c4551ba7cb983 ]
Add support for Qbv schedules where one queue stays open
in consecutive entries. Currently that's not supported.
Example schedule:
|tc qdisc replace dev ${INTERFACE} handle 100 parent root taprio num_tc 3 \
| map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
| queues 1@0 1@1 2@2 \
| base-time ${BASETIME} \
| sched-entry S 0x01 300000 \ # Stream High/Low
| sched-entry S 0x06 500000 \ # Management and Best Effort
| sched-entry S 0x04 200000 \ # Best Effort
| flags 0x02
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 72abeedd8398 ("igc: Set Qbv start_time and end_time to end_time if not being configured in GCL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igc/igc_main.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index df78aa4fb44b..791f59d09d28 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -5919,9 +5919,10 @@ static bool validate_schedule(struct igc_adapter *adapter,
return false;
for (n = 0; n < qopt->num_entries; n++) {
- const struct tc_taprio_sched_entry *e;
+ const struct tc_taprio_sched_entry *e, *prev;
int i;
+ prev = n ? &qopt->entries[n - 1] : NULL;
e = &qopt->entries[n];
/* i225 only supports "global" frame preemption
@@ -5934,7 +5935,12 @@ static bool validate_schedule(struct igc_adapter *adapter,
if (e->gate_mask & BIT(i))
queue_uses[i]++;
- if (queue_uses[i] > 1)
+ /* There are limitations: A single queue cannot be
+ * opened and closed multiple times per cycle unless the
+ * gate stays open. Check for it.
+ */
+ if (queue_uses[i] > 1 &&
+ !(prev->gate_mask & BIT(i)))
return false;
}
}
@@ -5978,6 +5984,7 @@ static int igc_tsn_clear_schedule(struct igc_adapter *adapter)
static int igc_save_qbv_schedule(struct igc_adapter *adapter,
struct tc_taprio_qopt_offload *qopt)
{
+ bool queue_configured[IGC_MAX_TX_QUEUES] = { };
u32 start_time = 0, end_time = 0;
size_t n;
@@ -5998,9 +6005,6 @@ static int igc_save_qbv_schedule(struct igc_adapter *adapter,
adapter->cycle_time = qopt->cycle_time;
adapter->base_time = qopt->base_time;
- /* FIXME: be a little smarter about cases when the gate for a
- * queue stays open for more than one entry.
- */
for (n = 0; n < qopt->num_entries; n++) {
struct tc_taprio_sched_entry *e = &qopt->entries[n];
int i;
@@ -6028,8 +6032,15 @@ static int igc_save_qbv_schedule(struct igc_adapter *adapter,
if (!(e->gate_mask & BIT(i)))
continue;
- ring->start_time = start_time;
+ /* Check whether a queue stays open for more than one
+ * entry. If so, keep the start and advance the end
+ * time.
+ */
+ if (!queue_configured[i])
+ ring->start_time = start_time;
ring->end_time = end_time;
+
+ queue_configured[i] = true;
}
start_time += e->interval;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 600/731] igc: Set Qbv start_time and end_time to end_time if not being configured in GCL
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (598 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 599/731] igc: Lift TAPRIO schedule restriction Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 601/731] rtc: mxc_v2: Add missing clk_disable_unprepare() Greg Kroah-Hartman
` (141 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tan Tee Min,
Muhammad Husaini Zulkifli, Naama Meir, Tony Nguyen, Sasha Levin
From: Tan Tee Min <tee.min.tan@linux.intel.com>
[ Upstream commit 72abeedd83982c1bc6023f631e412db78374d9b4 ]
The default setting of end_time minus start_time is whole 1 second.
Thus, if it's not being configured in any GCL entry then it will be
staying at original 1 second.
This patch is changing the start_time and end_time to be end_time as
if setting zero will be having weird HW behavior where the gate will
not be fully closed.
Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading")
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igc/igc_main.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 791f59d09d28..3726c8413c74 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -5987,6 +5987,7 @@ static int igc_save_qbv_schedule(struct igc_adapter *adapter,
bool queue_configured[IGC_MAX_TX_QUEUES] = { };
u32 start_time = 0, end_time = 0;
size_t n;
+ int i;
adapter->qbv_enable = qopt->enable;
@@ -6007,7 +6008,6 @@ static int igc_save_qbv_schedule(struct igc_adapter *adapter,
for (n = 0; n < qopt->num_entries; n++) {
struct tc_taprio_sched_entry *e = &qopt->entries[n];
- int i;
end_time += e->interval;
@@ -6046,6 +6046,18 @@ static int igc_save_qbv_schedule(struct igc_adapter *adapter,
start_time += e->interval;
}
+ /* Check whether a queue gets configured.
+ * If not, set the start and end time to be end time.
+ */
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ if (!queue_configured[i]) {
+ struct igc_ring *ring = adapter->tx_ring[i];
+
+ ring->start_time = end_time;
+ ring->end_time = end_time;
+ }
+ }
+
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 601/731] rtc: mxc_v2: Add missing clk_disable_unprepare()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (599 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 600/731] igc: Set Qbv start_time and end_time to end_time if not being configured in GCL Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 602/731] selftests: devlink: fix the fd redirect in dummy_reporter_test Greg Kroah-Hartman
` (140 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, GUO Zihua, Alexandre Belloni, Sasha Levin
From: GUO Zihua <guozihua@huawei.com>
[ Upstream commit 55d5a86618d3b1a768bce01882b74cbbd2651975 ]
The call to clk_disable_unprepare() is left out in the error handling of
devm_rtc_allocate_device. Add it back.
Fixes: 5490a1e018a4 ("rtc: mxc_v2: fix possible race condition")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20221122085046.21689-1-guozihua@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rtc/rtc-mxc_v2.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/rtc/rtc-mxc_v2.c b/drivers/rtc/rtc-mxc_v2.c
index 5e0383401629..f6d2ad91ff7a 100644
--- a/drivers/rtc/rtc-mxc_v2.c
+++ b/drivers/rtc/rtc-mxc_v2.c
@@ -336,8 +336,10 @@ static int mxc_rtc_probe(struct platform_device *pdev)
}
pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
- if (IS_ERR(pdata->rtc))
+ if (IS_ERR(pdata->rtc)) {
+ clk_disable_unprepare(pdata->clk);
return PTR_ERR(pdata->rtc);
+ }
pdata->rtc->ops = &mxc_rtc_ops;
pdata->rtc->range_max = U32_MAX;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 602/731] selftests: devlink: fix the fd redirect in dummy_reporter_test
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (600 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 601/731] rtc: mxc_v2: Add missing clk_disable_unprepare() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 603/731] openvswitch: Fix flow lookup to use unmasked key Greg Kroah-Hartman
` (139 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jakub Kicinski, David S. Miller,
Sasha Levin
From: Jakub Kicinski <kuba@kernel.org>
[ Upstream commit 2fc60e2ff972d3dca836bff0b08cbe503c4ca1ce ]
$number + > bash means redirect FD $number, e.g. commonly
used 2> redirects stderr (fd 2). The test uses 8192> to
write the number 8192 to a file, this results in:
./devlink.sh: line 499: 8192: Bad file descriptor
Oddly the test also papers over this issue by checking
for failure (expecting an error rather than success)
so it passes, anyway.
Fixes: ff18176ad806 ("selftests: Add a test of large binary to devlink health test")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/drivers/net/netdevsim/devlink.sh | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh
index 9de1d123f4f5..a08c02abde12 100755
--- a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh
+++ b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh
@@ -496,8 +496,8 @@ dummy_reporter_test()
check_reporter_info dummy healthy 3 3 10 true
- echo 8192> $DEBUGFS_DIR/health/binary_len
- check_fail $? "Failed set dummy reporter binary len to 8192"
+ echo 8192 > $DEBUGFS_DIR/health/binary_len
+ check_err $? "Failed set dummy reporter binary len to 8192"
local dump=$(devlink health dump show $DL_HANDLE reporter dummy -j)
check_err $? "Failed show dump of dummy reporter"
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 603/731] openvswitch: Fix flow lookup to use unmasked key
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (601 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 602/731] selftests: devlink: fix the fd redirect in dummy_reporter_test Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 604/731] soc: mediatek: pm-domains: Fix the power glitch issue Greg Kroah-Hartman
` (138 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eelco Chaudron, David S. Miller,
Sasha Levin
From: Eelco Chaudron <echaudro@redhat.com>
[ Upstream commit 68bb10101e6b0a6bb44e9c908ef795fc4af99eae ]
The commit mentioned below causes the ovs_flow_tbl_lookup() function
to be called with the masked key. However, it's supposed to be called
with the unmasked key. This due to the fact that the datapath supports
installing wider flows, and OVS relies on this behavior. For example
if ipv4(src=1.1.1.1/192.0.0.0, dst=1.1.1.2/192.0.0.0) exists, a wider
flow (smaller mask) of ipv4(src=192.1.1.1/128.0.0.0,dst=192.1.1.2/
128.0.0.0) is allowed to be added.
However, if we try to add a wildcard rule, the installation fails:
$ ovs-appctl dpctl/add-flow system@myDP "in_port(1),eth_type(0x0800), \
ipv4(src=1.1.1.1/192.0.0.0,dst=1.1.1.2/192.0.0.0,frag=no)" 2
$ ovs-appctl dpctl/add-flow system@myDP "in_port(1),eth_type(0x0800), \
ipv4(src=192.1.1.1/0.0.0.0,dst=49.1.1.2/0.0.0.0,frag=no)" 2
ovs-vswitchd: updating flow table (File exists)
The reason is that the key used to determine if the flow is already
present in the system uses the original key ANDed with the mask.
This results in the IP address not being part of the (miniflow) key,
i.e., being substituted with an all-zero value. When doing the actual
lookup, this results in the key wrongfully matching the first flow,
and therefore the flow does not get installed.
This change reverses the commit below, but rather than having the key
on the stack, it's allocated.
Fixes: 190aa3e77880 ("openvswitch: Fix Frame-size larger than 1024 bytes warning.")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/openvswitch/datapath.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
index 94c48122fdc3..795a25ecb893 100644
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -946,6 +946,7 @@ static int ovs_flow_cmd_new(struct sk_buff *skb, struct genl_info *info)
struct sw_flow_mask mask;
struct sk_buff *reply;
struct datapath *dp;
+ struct sw_flow_key *key;
struct sw_flow_actions *acts;
struct sw_flow_match match;
u32 ufid_flags = ovs_nla_get_ufid_flags(a[OVS_FLOW_ATTR_UFID_FLAGS]);
@@ -973,24 +974,26 @@ static int ovs_flow_cmd_new(struct sk_buff *skb, struct genl_info *info)
}
/* Extract key. */
- ovs_match_init(&match, &new_flow->key, false, &mask);
+ key = kzalloc(sizeof(*key), GFP_KERNEL);
+ if (!key) {
+ error = -ENOMEM;
+ goto err_kfree_key;
+ }
+
+ ovs_match_init(&match, key, false, &mask);
error = ovs_nla_get_match(net, &match, a[OVS_FLOW_ATTR_KEY],
a[OVS_FLOW_ATTR_MASK], log);
if (error)
goto err_kfree_flow;
+ ovs_flow_mask_key(&new_flow->key, key, true, &mask);
+
/* Extract flow identifier. */
error = ovs_nla_get_identifier(&new_flow->id, a[OVS_FLOW_ATTR_UFID],
- &new_flow->key, log);
+ key, log);
if (error)
goto err_kfree_flow;
- /* unmasked key is needed to match when ufid is not used. */
- if (ovs_identifier_is_key(&new_flow->id))
- match.key = new_flow->id.unmasked_key;
-
- ovs_flow_mask_key(&new_flow->key, &new_flow->key, true, &mask);
-
/* Validate actions. */
error = ovs_nla_copy_actions(net, a[OVS_FLOW_ATTR_ACTIONS],
&new_flow->key, &acts, log);
@@ -1017,7 +1020,7 @@ static int ovs_flow_cmd_new(struct sk_buff *skb, struct genl_info *info)
if (ovs_identifier_is_ufid(&new_flow->id))
flow = ovs_flow_tbl_lookup_ufid(&dp->table, &new_flow->id);
if (!flow)
- flow = ovs_flow_tbl_lookup(&dp->table, &new_flow->key);
+ flow = ovs_flow_tbl_lookup(&dp->table, key);
if (likely(!flow)) {
rcu_assign_pointer(new_flow->sf_acts, acts);
@@ -1087,6 +1090,8 @@ static int ovs_flow_cmd_new(struct sk_buff *skb, struct genl_info *info)
if (reply)
ovs_notify(&dp_flow_genl_family, reply, info);
+
+ kfree(key);
return 0;
err_unlock_ovs:
@@ -1096,6 +1101,8 @@ static int ovs_flow_cmd_new(struct sk_buff *skb, struct genl_info *info)
ovs_nla_free_flow_actions(acts);
err_kfree_flow:
ovs_flow_free(new_flow, false);
+err_kfree_key:
+ kfree(key);
error:
return error;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 604/731] soc: mediatek: pm-domains: Fix the power glitch issue
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (602 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 603/731] openvswitch: Fix flow lookup to use unmasked key Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 605/731] arm64: dts: mt8183: Fix Mali GPU clock Greg Kroah-Hartman
` (137 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chun-Jie Chen, Allen-KH Cheng,
Chen-Yu Tsai, Miles Chen, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: Chun-Jie Chen <chun-jie.chen@mediatek.com>
[ Upstream commit dba8eb83af9dd757ef645b52200775e86883d858 ]
Power reset maybe generate unexpected signal. In order to avoid
the glitch issue, we need to enable isolation first to guarantee the
stable signal when power reset is triggered.
Fixes: 59b644b01cf4 ("soc: mediatek: Add MediaTek SCPSYS power domains")
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221014102029.1162-1-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/mediatek/mtk-pm-domains.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index afd2fd74802d..52ecde8e446c 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -272,9 +272,9 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
clk_bulk_disable_unprepare(pd->num_subsys_clks, pd->subsys_clks);
/* subsys power off */
- regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_ISO_BIT);
regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_CLK_DIS_BIT);
+ regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_ON_2ND_BIT);
regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_ON_BIT);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 605/731] arm64: dts: mt8183: Fix Mali GPU clock
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (603 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 604/731] soc: mediatek: pm-domains: Fix the power glitch issue Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 606/731] skbuff: Account for tail adjustment during pull operations Greg Kroah-Hartman
` (136 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen-Yu Tsai,
AngeloGioacchino Del Regno, Nícolas F . R . A . Prado,
Matthias Brugger, Sasha Levin
From: Chen-Yu Tsai <wenst@chromium.org>
[ Upstream commit ad2631b5645a1d0ca9bf6fecf71f77e3b0071ee5 ]
The actual clock feeding into the Mali GPU on the MT8183 is from the
clock gate in the MFGCFG block, not CLK_TOP_MFGPLL_CK from the TOPCKGEN
block, which itself is simply a pass-through placeholder for the MFGPLL
in the APMIXEDSYS block.
Fix the hardware description with the correct clock reference.
Fixes: a8168cebf1bc ("arm64: dts: mt8183: Add node for the Mali GPU")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220927101128.44758-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 409cf827970c..f4e0bea8ddcb 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1212,7 +1212,7 @@ gpu: gpu@13040000 {
<GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "job", "mmu", "gpu";
- clocks = <&topckgen CLK_TOP_MFGPLL_CK>;
+ clocks = <&mfgcfg CLK_MFG_BG3D>;
power-domains =
<&spm MT8183_POWER_DOMAIN_MFG_CORE0>,
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 606/731] skbuff: Account for tail adjustment during pull operations
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (604 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 605/731] arm64: dts: mt8183: Fix Mali GPU clock Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 607/731] mailbox: mpfs: read the system controllers status Greg Kroah-Hartman
` (135 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sean Tranchetti,
Subash Abhinov Kasiviswanathan, Alexander Duyck, Jakub Kicinski,
Sasha Levin
From: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
[ Upstream commit 2d7afdcbc9d32423f177ee12b7c93783aea338fb ]
Extending the tail can have some unexpected side effects if a program uses
a helper like BPF_FUNC_skb_pull_data to read partial content beyond the
head skb headlen when all the skbs in the gso frag_list are linear with no
head_frag -
kernel BUG at net/core/skbuff.c:4219!
pc : skb_segment+0xcf4/0xd2c
lr : skb_segment+0x63c/0xd2c
Call trace:
skb_segment+0xcf4/0xd2c
__udp_gso_segment+0xa4/0x544
udp4_ufo_fragment+0x184/0x1c0
inet_gso_segment+0x16c/0x3a4
skb_mac_gso_segment+0xd4/0x1b0
__skb_gso_segment+0xcc/0x12c
udp_rcv_segment+0x54/0x16c
udp_queue_rcv_skb+0x78/0x144
udp_unicast_rcv_skb+0x8c/0xa4
__udp4_lib_rcv+0x490/0x68c
udp_rcv+0x20/0x30
ip_protocol_deliver_rcu+0x1b0/0x33c
ip_local_deliver+0xd8/0x1f0
ip_rcv+0x98/0x1a4
deliver_ptype_list_skb+0x98/0x1ec
__netif_receive_skb_core+0x978/0xc60
Fix this by marking these skbs as GSO_DODGY so segmentation can handle
the tail updates accordingly.
Fixes: 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/1671084718-24796-1-git-send-email-quic_subashab@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/skbuff.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 6706bd3c8e9c..058ec2f17da6 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2263,6 +2263,9 @@ void *__pskb_pull_tail(struct sk_buff *skb, int delta)
insp = list;
} else {
/* Eaten partially. */
+ if (skb_is_gso(skb) && !list->head_frag &&
+ skb_headlen(list))
+ skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY;
if (skb_shared(list)) {
/* Sucks! We need to fork list. :-( */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 607/731] mailbox: mpfs: read the system controllers status
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (605 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 606/731] skbuff: Account for tail adjustment during pull operations Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 608/731] mailbox: arm_mhuv2: Fix return value check in mhuv2_probe() Greg Kroah-Hartman
` (134 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Conor Dooley, Palmer Dabbelt,
Jassi Brar, Sasha Levin
From: Conor Dooley <conor.dooley@microchip.com>
[ Upstream commit ab47d0bfdf88faac0eb02749e5bfaa306e004300 ]
Some services explicitly return an error code in their response, but
others rely on the system controller to set a status in its status
register. The meaning of the bits varies based on what service is
requested, so pass it back up to the driver that requested the service
in the first place. The field in the message struct already existed, but
was unused until now.
If the system controller is busy, in which case we should never actually
be in the interrupt handler, or if the service fails the mailbox itself
should not be read. Callers should check the status before operating on
the response.
There's an existing, but unused, #define for the mailbox mask - but it
was incorrect. It was doing a GENMASK_ULL(32, 16) which should've just
been a GENMASK(31, 16), so fix that up and start using it.
Fixes: 83d7b1560810 ("mbox: add polarfire soc system controller mailbox")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mailbox/mailbox-mpfs.c | 31 ++++++++++++++++++++++++++++---
1 file changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/mailbox/mailbox-mpfs.c b/drivers/mailbox/mailbox-mpfs.c
index cfacb3f320a6..853901acaeec 100644
--- a/drivers/mailbox/mailbox-mpfs.c
+++ b/drivers/mailbox/mailbox-mpfs.c
@@ -2,7 +2,7 @@
/*
* Microchip PolarFire SoC (MPFS) system controller/mailbox controller driver
*
- * Copyright (c) 2020 Microchip Corporation. All rights reserved.
+ * Copyright (c) 2020-2022 Microchip Corporation. All rights reserved.
*
* Author: Conor Dooley <conor.dooley@microchip.com>
*
@@ -56,7 +56,7 @@
#define SCB_STATUS_NOTIFY_MASK BIT(SCB_STATUS_NOTIFY)
#define SCB_STATUS_POS (16)
-#define SCB_STATUS_MASK GENMASK_ULL(SCB_STATUS_POS + SCB_MASK_WIDTH, SCB_STATUS_POS)
+#define SCB_STATUS_MASK GENMASK(SCB_STATUS_POS + SCB_MASK_WIDTH - 1, SCB_STATUS_POS)
struct mpfs_mbox {
struct mbox_controller controller;
@@ -130,13 +130,38 @@ static void mpfs_mbox_rx_data(struct mbox_chan *chan)
struct mpfs_mbox *mbox = (struct mpfs_mbox *)chan->con_priv;
struct mpfs_mss_response *response = mbox->response;
u16 num_words = ALIGN((response->resp_size), (4)) / 4U;
- u32 i;
+ u32 i, status;
if (!response->resp_msg) {
dev_err(mbox->dev, "failed to assign memory for response %d\n", -ENOMEM);
return;
}
+ /*
+ * The status is stored in bits 31:16 of the SERVICES_SR register.
+ * It is only valid when BUSY == 0.
+ * We should *never* get an interrupt while the controller is
+ * still in the busy state. If we do, something has gone badly
+ * wrong & the content of the mailbox would not be valid.
+ */
+ if (mpfs_mbox_busy(mbox)) {
+ dev_err(mbox->dev, "got an interrupt but system controller is busy\n");
+ response->resp_status = 0xDEAD;
+ return;
+ }
+
+ status = readl_relaxed(mbox->ctrl_base + SERVICES_SR_OFFSET);
+
+ /*
+ * If the status of the individual servers is non-zero, the service has
+ * failed. The contents of the mailbox at this point are not be valid,
+ * so don't bother reading them. Set the status so that the driver
+ * implementing the service can handle the result.
+ */
+ response->resp_status = (status & SCB_STATUS_MASK) >> SCB_STATUS_POS;
+ if (response->resp_status)
+ return;
+
if (!mpfs_mbox_busy(mbox)) {
for (i = 0; i < num_words; i++) {
response->resp_msg[i] =
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 608/731] mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (606 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 607/731] mailbox: mpfs: read the system controllers status Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 609/731] mailbox: zynq-ipi: fix error handling while device_register() fails Greg Kroah-Hartman
` (133 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Viresh Kumar,
Jassi Brar, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 165b7643f2df890066b1b4e8a387888a600ca9bf ]
If devm_of_iomap() fails, it returns ERR_PTR() and never
return NULL, so replace NULL pointer check with IS_ERR()
to fix this problem.
Fixes: 5a6338cce9f4 ("mailbox: arm_mhuv2: Add driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mailbox/arm_mhuv2.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mailbox/arm_mhuv2.c b/drivers/mailbox/arm_mhuv2.c
index d997f8ebfa98..3af15083a25a 100644
--- a/drivers/mailbox/arm_mhuv2.c
+++ b/drivers/mailbox/arm_mhuv2.c
@@ -1061,8 +1061,8 @@ static int mhuv2_probe(struct amba_device *adev, const struct amba_id *id)
int ret = -EINVAL;
reg = devm_of_iomap(dev, dev->of_node, 0, NULL);
- if (!reg)
- return -ENOMEM;
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
mhu = devm_kzalloc(dev, sizeof(*mhu), GFP_KERNEL);
if (!mhu)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 609/731] mailbox: zynq-ipi: fix error handling while device_register() fails
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (607 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 608/731] mailbox: arm_mhuv2: Fix return value check in mhuv2_probe() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 610/731] net_sched: reject TCF_EM_SIMPLE case for complex ematch module Greg Kroah-Hartman
` (132 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Jassi Brar, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit a6792a0cdef0b1c2d77920246283a72537e60e94 ]
If device_register() fails, it has two issues:
1. The name allocated by dev_set_name() is leaked.
2. The parent of device is not NULL, device_unregister() is called
in zynqmp_ipi_free_mboxes(), it will lead a kernel crash because
of removing not added device.
Call put_device() to give up the reference, so the name is freed in
kobject_cleanup(). Add device registered check in zynqmp_ipi_free_mboxes()
to avoid null-ptr-deref.
Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mailbox/zynqmp-ipi-mailbox.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mailbox/zynqmp-ipi-mailbox.c b/drivers/mailbox/zynqmp-ipi-mailbox.c
index f44079d62b1a..527204c6d5cd 100644
--- a/drivers/mailbox/zynqmp-ipi-mailbox.c
+++ b/drivers/mailbox/zynqmp-ipi-mailbox.c
@@ -493,6 +493,7 @@ static int zynqmp_ipi_mbox_probe(struct zynqmp_ipi_mbox *ipi_mbox,
ret = device_register(&ipi_mbox->dev);
if (ret) {
dev_err(dev, "Failed to register ipi mbox dev.\n");
+ put_device(&ipi_mbox->dev);
return ret;
}
mdev = &ipi_mbox->dev;
@@ -619,7 +620,8 @@ static void zynqmp_ipi_free_mboxes(struct zynqmp_ipi_pdata *pdata)
ipi_mbox = &pdata->ipi_mboxes[i];
if (ipi_mbox->dev.parent) {
mbox_controller_unregister(&ipi_mbox->mbox);
- device_unregister(&ipi_mbox->dev);
+ if (device_is_registered(&ipi_mbox->dev))
+ device_unregister(&ipi_mbox->dev);
}
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 610/731] net_sched: reject TCF_EM_SIMPLE case for complex ematch module
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (608 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 609/731] mailbox: zynq-ipi: fix error handling while device_register() fails Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 611/731] rxrpc: Fix missing unlock in rxrpc_do_sendmsg() Greg Kroah-Hartman
` (131 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jun Nie, Jamal Hadi Salim,
Paolo Abeni, Cong Wang, David S. Miller, Sasha Levin,
syzbot+4caeae4c7103813598ae
From: Cong Wang <cong.wang@bytedance.com>
[ Upstream commit 9cd3fd2054c3b3055163accbf2f31a4426f10317 ]
When TCF_EM_SIMPLE was introduced, it is supposed to be convenient
for ematch implementation:
https://lore.kernel.org/all/20050105110048.GO26856@postel.suug.ch/
"You don't have to, providing a 32bit data chunk without TCF_EM_SIMPLE
set will simply result in allocating & copy. It's an optimization,
nothing more."
So if an ematch module provides ops->datalen that means it wants a
complex data structure (saved in its em->data) instead of a simple u32
value. We should simply reject such a combination, otherwise this u32
could be misinterpreted as a pointer.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+4caeae4c7103813598ae@syzkaller.appspotmail.com
Reported-by: Jun Nie <jun.nie@linaro.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/sched/ematch.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/sched/ematch.c b/net/sched/ematch.c
index 4ce681361851..5c1235e6076a 100644
--- a/net/sched/ematch.c
+++ b/net/sched/ematch.c
@@ -255,6 +255,8 @@ static int tcf_em_validate(struct tcf_proto *tp,
* the value carried.
*/
if (em_hdr->flags & TCF_EM_SIMPLE) {
+ if (em->ops->datalen > 0)
+ goto errout;
if (data_len < sizeof(u32))
goto errout;
em->data = *(u32 *) data;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 611/731] rxrpc: Fix missing unlock in rxrpc_do_sendmsg()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (609 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 610/731] net_sched: reject TCF_EM_SIMPLE case for complex ematch module Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 612/731] myri10ge: Fix an error handling path in myri10ge_probe() Greg Kroah-Hartman
` (130 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, David Howells, Marc Dionne,
linux-afs, David S. Miller, Sasha Levin
From: David Howells <dhowells@redhat.com>
[ Upstream commit 4feb2c44629e6f9b459b41a5a60491069d346a95 ]
One of the error paths in rxrpc_do_sendmsg() doesn't unlock the call mutex
before returning. Fix it to do this.
Note that this still doesn't get rid of the checker warning:
../net/rxrpc/sendmsg.c:617:5: warning: context imbalance in 'rxrpc_do_sendmsg' - wrong count at exit
I think the interplay between the socket lock and the call's user_mutex may
be too complicated for checker to analyse, especially as
rxrpc_new_client_call_for_sendmsg(), which it calls, returns with the
call's user_mutex if successful but unconditionally drops the socket lock.
Fixes: e754eba685aa ("rxrpc: Provide a cmsg to specify the amount of Tx data for a call")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/rxrpc/sendmsg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c
index 3c3a626459de..d4e4e94f4f98 100644
--- a/net/rxrpc/sendmsg.c
+++ b/net/rxrpc/sendmsg.c
@@ -716,7 +716,7 @@ int rxrpc_do_sendmsg(struct rxrpc_sock *rx, struct msghdr *msg, size_t len)
if (call->tx_total_len != -1 ||
call->tx_pending ||
call->tx_top != 0)
- goto error_put;
+ goto out_put_unlock;
call->tx_total_len = p.call.tx_total_len;
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 612/731] myri10ge: Fix an error handling path in myri10ge_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (610 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 611/731] rxrpc: Fix missing unlock in rxrpc_do_sendmsg() Greg Kroah-Hartman
@ 2022-12-28 14:41 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 613/731] net: stream: purge sk_error_queue in sk_stream_kill_queues() Greg Kroah-Hartman
` (129 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:41 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christophe JAILLET, David S. Miller,
Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit d83b950d44d2982c0e62e3d81b0f35ab09431008 ]
Some memory allocated in myri10ge_probe_slices() is not released in the
error handling path of myri10ge_probe().
Add the corresponding kfree(), as already done in the remove function.
Fixes: 0dcffac1a329 ("myri10ge: add multislices support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
index 052696ce5096..97c2604df019 100644
--- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
@@ -3923,6 +3923,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
myri10ge_free_slices(mgp);
abort_with_firmware:
+ kfree(mgp->msix_vectors);
myri10ge_dummy_rdma(mgp, 0);
abort_with_ioremap:
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 613/731] net: stream: purge sk_error_queue in sk_stream_kill_queues()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (611 preceding siblings ...)
2022-12-28 14:41 ` [PATCH 5.15 612/731] myri10ge: Fix an error handling path in myri10ge_probe() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 614/731] HID: amd_sfh: Add missing check for dma_alloc_coherent Greg Kroah-Hartman
` (128 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Changheon Lee, Eric Dumazet,
David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit e0c8bccd40fc1c19e1d246c39bcf79e357e1ada3 ]
Changheon Lee reported TCP socket leaks, with a nice repro.
It seems we leak TCP sockets with the following sequence:
1) SOF_TIMESTAMPING_TX_ACK is enabled on the socket.
Each ACK will cook an skb put in error queue, from __skb_tstamp_tx().
__skb_tstamp_tx() is using skb_clone(), unless
SOF_TIMESTAMPING_OPT_TSONLY was also requested.
2) If the application is also using MSG_ZEROCOPY, then we put in the
error queue cloned skbs that had a struct ubuf_info attached to them.
Whenever an struct ubuf_info is allocated, sock_zerocopy_alloc()
does a sock_hold().
As long as the cloned skbs are still in sk_error_queue,
socket refcount is kept elevated.
3) Application closes the socket, while error queue is not empty.
Since tcp_close() no longer purges the socket error queue,
we might end up with a TCP socket with at least one skb in
error queue keeping the socket alive forever.
This bug can be (ab)used to consume all kernel memory
and freeze the host.
We need to purge the error queue, with proper synchronization
against concurrent writers.
Fixes: 24bcbe1cc69f ("net: stream: don't purge sk_error_queue in sk_stream_kill_queues()")
Reported-by: Changheon Lee <darklight2357@icloud.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/stream.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/core/stream.c b/net/core/stream.c
index a61130504827..d7c5413d16d5 100644
--- a/net/core/stream.c
+++ b/net/core/stream.c
@@ -196,6 +196,12 @@ void sk_stream_kill_queues(struct sock *sk)
/* First the read buffer. */
__skb_queue_purge(&sk->sk_receive_queue);
+ /* Next, the error queue.
+ * We need to use queue lock, because other threads might
+ * add packets to the queue without socket lock being held.
+ */
+ skb_queue_purge(&sk->sk_error_queue);
+
/* Next, the write queue. */
WARN_ON(!skb_queue_empty(&sk->sk_write_queue));
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 614/731] HID: amd_sfh: Add missing check for dma_alloc_coherent
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (612 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 613/731] net: stream: purge sk_error_queue in sk_stream_kill_queues() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 615/731] rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state() Greg Kroah-Hartman
` (127 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Basavaraj Natikar,
Benjamin Tissoires, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit 53ffa6a9f83b2170c60591da1ead8791d5a42e81 ]
Add check for the return value of the dma_alloc_coherent since
it may return NULL pointer if allocation fails.
Fixes: 4b2c53d93a4b ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221220024921.21992-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/amd-sfh-hid/amd_sfh_client.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_client.c b/drivers/hid/amd-sfh-hid/amd_sfh_client.c
index ab149b80f86c..911a23a9bcd1 100644
--- a/drivers/hid/amd-sfh-hid/amd_sfh_client.c
+++ b/drivers/hid/amd-sfh-hid/amd_sfh_client.c
@@ -166,6 +166,10 @@ int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata)
in_data->sensor_virt_addr[i] = dma_alloc_coherent(dev, sizeof(int) * 8,
&cl_data->sensor_dma_addr[i],
GFP_KERNEL);
+ if (!in_data->sensor_virt_addr[i]) {
+ rc = -ENOMEM;
+ goto cleanup;
+ }
cl_data->sensor_sts[i] = SENSOR_DISABLED;
cl_data->sensor_requested_cnt[i] = 0;
cl_data->cur_hid_dev = i;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 615/731] rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (613 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 614/731] HID: amd_sfh: Add missing check for dma_alloc_coherent Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 616/731] arm64: make is_ttbrX_addr() noinstr-safe Greg Kroah-Hartman
` (126 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zqiang, Joel Fernandes (Google),
Paul E. McKenney, Sasha Levin
From: Zqiang <qiang1.zhang@intel.com>
[ Upstream commit ceb1c8c9b8aa9199da46a0f29d2d5f08d9b44c15 ]
Running rcutorture with non-zero fqs_duration module parameter in a
kernel built with CONFIG_PREEMPTION=y results in the following splat:
BUG: using __this_cpu_read() in preemptible [00000000]
code: rcu_torture_fqs/398
caller is __this_cpu_preempt_check+0x13/0x20
CPU: 3 PID: 398 Comm: rcu_torture_fqs Not tainted 6.0.0-rc1-yoctodev-standard+
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x86
dump_stack+0x10/0x16
check_preemption_disabled+0xe5/0xf0
__this_cpu_preempt_check+0x13/0x20
rcu_force_quiescent_state.part.0+0x1c/0x170
rcu_force_quiescent_state+0x1e/0x30
rcu_torture_fqs+0xca/0x160
? rcu_torture_boost+0x430/0x430
kthread+0x192/0x1d0
? kthread_complete_and_exit+0x30/0x30
ret_from_fork+0x22/0x30
</TASK>
The problem is that rcu_force_quiescent_state() uses __this_cpu_read()
in preemptible code instead of the proper raw_cpu_read(). This commit
therefore changes __this_cpu_read() to raw_cpu_read().
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/rcu/tree.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 63f7ce228cc3..cf101da389b0 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -2674,7 +2674,7 @@ void rcu_force_quiescent_state(void)
struct rcu_node *rnp_old = NULL;
/* Funnel through hierarchy to reduce memory contention. */
- rnp = __this_cpu_read(rcu_data.mynode);
+ rnp = raw_cpu_read(rcu_data.mynode);
for (; rnp != NULL; rnp = rnp->parent) {
ret = (READ_ONCE(rcu_state.gp_flags) & RCU_GP_FLAG_FQS) ||
!raw_spin_trylock(&rnp->fqslock);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 616/731] arm64: make is_ttbrX_addr() noinstr-safe
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (614 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 615/731] rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 617/731] video: hyperv_fb: Avoid taking busy spinlock on panic path Greg Kroah-Hartman
` (125 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mark Rutland, Catalin Marinas,
Will Deacon, Sasha Levin
From: Mark Rutland <mark.rutland@arm.com>
[ Upstream commit d8c1d798a2e5091128c391c6dadcc9be334af3f5 ]
We use is_ttbr0_addr() in noinstr code, but as it's only marked as
inline, it's theoretically possible for the compiler to place it
out-of-line and instrument it, which would be problematic.
Mark is_ttbr0_addr() as __always_inline such that that can safely be
used from noinstr code. For consistency, do the same to is_ttbr1_addr().
Note that while is_ttbr1_addr() calls arch_kasan_reset_tag(), this is a
macro (and its callees are either macros or __always_inline), so there
is not a risk of transient instrumentation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221114144042.3001140-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/include/asm/processor.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index d9bf3d12a2b8..7364530de0a7 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -240,13 +240,13 @@ static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc,
}
#endif
-static inline bool is_ttbr0_addr(unsigned long addr)
+static __always_inline bool is_ttbr0_addr(unsigned long addr)
{
/* entry assembly clears tags for TTBR0 addrs */
return addr < TASK_SIZE;
}
-static inline bool is_ttbr1_addr(unsigned long addr)
+static __always_inline bool is_ttbr1_addr(unsigned long addr)
{
/* TTBR1 addresses may have a tag if KASAN_SW_TAGS is in use */
return arch_kasan_reset_tag(addr) >= PAGE_OFFSET;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 617/731] video: hyperv_fb: Avoid taking busy spinlock on panic path
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (615 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 616/731] arm64: make is_ttbrX_addr() noinstr-safe Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 618/731] x86/hyperv: Remove unregister syscore call from Hyper-V cleanup Greg Kroah-Hartman
` (124 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrea Parri (Microsoft),
Dexuan Cui, Haiyang Zhang, K. Y. Srinivasan, Michael Kelley,
Stephen Hemminger, Tianyu Lan, Wei Liu, Fabio A M Martins,
Guilherme G. Piccoli, Sasha Levin
From: Guilherme G. Piccoli <gpiccoli@igalia.com>
[ Upstream commit 1d044ca035dc22df0d3b39e56f2881071d9118bd ]
The Hyper-V framebuffer code registers a panic notifier in order
to try updating its fbdev if the kernel crashed. The notifier
callback is straightforward, but it calls the vmbus_sendpacket()
routine eventually, and such function takes a spinlock for the
ring buffer operations.
Panic path runs in atomic context, with local interrupts and
preemption disabled, and all secondary CPUs shutdown. That said,
taking a spinlock might cause a lockup if a secondary CPU was
disabled with such lock taken. Fix it here by checking if the
ring buffer spinlock is busy on Hyper-V framebuffer panic notifier;
if so, bail-out avoiding the potential lockup scenario.
Cc: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Tianyu Lan <Tianyu.Lan@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Tested-by: Fabio A M Martins <fabiomirmar@gmail.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220819221731.480795-10-gpiccoli@igalia.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hv/ring_buffer.c | 13 +++++++++++++
drivers/video/fbdev/hyperv_fb.c | 8 +++++++-
include/linux/hyperv.h | 2 ++
3 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c
index f4091143213b..1475ea77351e 100644
--- a/drivers/hv/ring_buffer.c
+++ b/drivers/hv/ring_buffer.c
@@ -249,6 +249,19 @@ void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info)
ring_info->pkt_buffer_size = 0;
}
+/*
+ * Check if the ring buffer spinlock is available to take or not; used on
+ * atomic contexts, like panic path (see the Hyper-V framebuffer driver).
+ */
+
+bool hv_ringbuffer_spinlock_busy(struct vmbus_channel *channel)
+{
+ struct hv_ring_buffer_info *rinfo = &channel->outbound;
+
+ return spin_is_locked(&rinfo->ring_lock);
+}
+EXPORT_SYMBOL_GPL(hv_ringbuffer_spinlock_busy);
+
/* Write to the ring buffer. */
int hv_ringbuffer_write(struct vmbus_channel *channel,
const struct kvec *kv_list, u32 kv_count,
diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index 58c304a3b7c4..de865e197c8d 100644
--- a/drivers/video/fbdev/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -799,12 +799,18 @@ static void hvfb_ondemand_refresh_throttle(struct hvfb_par *par,
static int hvfb_on_panic(struct notifier_block *nb,
unsigned long e, void *p)
{
+ struct hv_device *hdev;
struct hvfb_par *par;
struct fb_info *info;
par = container_of(nb, struct hvfb_par, hvfb_panic_nb);
- par->synchronous_fb = true;
info = par->info;
+ hdev = device_to_hv_device(info->device);
+
+ if (hv_ringbuffer_spinlock_busy(hdev->channel))
+ return NOTIFY_DONE;
+
+ par->synchronous_fb = true;
if (par->need_docopy)
hvfb_docopy(par, 0, dio_fb_size);
synthvid_update(info, 0, 0, INT_MAX, INT_MAX);
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index ddc8713ce57b..8499fc9220e0 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -1307,6 +1307,8 @@ struct hv_ring_buffer_debug_info {
int hv_ringbuffer_get_debuginfo(struct hv_ring_buffer_info *ring_info,
struct hv_ring_buffer_debug_info *debug_info);
+bool hv_ringbuffer_spinlock_busy(struct vmbus_channel *channel);
+
/* Vmbus interface */
#define vmbus_driver_register(driver) \
__vmbus_driver_register(driver, THIS_MODULE, KBUILD_MODNAME)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 618/731] x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (616 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 617/731] video: hyperv_fb: Avoid taking busy spinlock on panic path Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 619/731] binfmt_misc: fix shift-out-of-bounds in check_special_flags Greg Kroah-Hartman
` (123 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gaurav Kohli, Michael Kelley,
Wei Liu, Sasha Levin
From: Gaurav Kohli <gauravkohli@linux.microsoft.com>
[ Upstream commit 32c97d980e2eef25465d453f2956a9ca68926a3c ]
Hyper-V cleanup code comes under panic path where preemption and irq
is already disabled. So calling of unregister_syscore_ops might schedule
out the thread even for the case where mutex lock is free.
hyperv_cleanup
unregister_syscore_ops
mutex_lock(&syscore_ops_lock)
might_sleep
Here might_sleep might schedule out this thread, where voluntary preemption
config is on and this thread will never comes back. And also this was added
earlier to maintain the symmetry which is not required as this can comes
during crash shutdown path only.
To prevent the same, removing unregister_syscore_ops function call.
Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1669443291-2575-1-git-send-email-gauravkohli@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/hyperv/hv_init.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 762f10cdfb7a..95f98af74fdc 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -469,8 +469,6 @@ void hyperv_cleanup(void)
{
union hv_x64_msr_hypercall_contents hypercall_msr;
- unregister_syscore_ops(&hv_syscore_ops);
-
/* Reset our OS id */
wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 619/731] binfmt_misc: fix shift-out-of-bounds in check_special_flags
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (617 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 618/731] x86/hyperv: Remove unregister syscore call from Hyper-V cleanup Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 620/731] fs: jfs: fix shift-out-of-bounds in dbAllocAG Greg Kroah-Hartman
` (122 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Liu Shixin, Kees Cook, Sasha Levin
From: Liu Shixin <liushixin2@huawei.com>
[ Upstream commit 6a46bf558803dd2b959ca7435a5c143efe837217 ]
UBSAN reported a shift-out-of-bounds warning:
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xcf lib/dump_stack.c:106
ubsan_epilogue+0xa/0x44 lib/ubsan.c:151
__ubsan_handle_shift_out_of_bounds+0x1e7/0x208 lib/ubsan.c:322
check_special_flags fs/binfmt_misc.c:241 [inline]
create_entry fs/binfmt_misc.c:456 [inline]
bm_register_write+0x9d3/0xa20 fs/binfmt_misc.c:654
vfs_write+0x11e/0x580 fs/read_write.c:582
ksys_write+0xcf/0x120 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x34/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x4194e1
Since the type of Node's flags is unsigned long, we should define these
macros with same type too.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102025123.1117184-1-liushixin2@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/binfmt_misc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index e1eae7ea823a..bb202ad369d5 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -44,10 +44,10 @@ static LIST_HEAD(entries);
static int enabled = 1;
enum {Enabled, Magic};
-#define MISC_FMT_PRESERVE_ARGV0 (1 << 31)
-#define MISC_FMT_OPEN_BINARY (1 << 30)
-#define MISC_FMT_CREDENTIALS (1 << 29)
-#define MISC_FMT_OPEN_FILE (1 << 28)
+#define MISC_FMT_PRESERVE_ARGV0 (1UL << 31)
+#define MISC_FMT_OPEN_BINARY (1UL << 30)
+#define MISC_FMT_CREDENTIALS (1UL << 29)
+#define MISC_FMT_OPEN_FILE (1UL << 28)
typedef struct {
struct list_head list;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 620/731] fs: jfs: fix shift-out-of-bounds in dbAllocAG
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (618 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 619/731] binfmt_misc: fix shift-out-of-bounds in check_special_flags Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 621/731] udf: Avoid double brelse() in udf_rename() Greg Kroah-Hartman
` (121 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+15342c1aa6a00fb7a438,
Dongliang Mu, Dave Kleikamp, Sasha Levin
From: Dongliang Mu <mudongliangabcd@gmail.com>
[ Upstream commit 898f706695682b9954f280d95e49fa86ffa55d08 ]
Syzbot found a crash : UBSAN: shift-out-of-bounds in dbAllocAG. The
underlying bug is the missing check of bmp->db_agl2size. The field can
be greater than 64 and trigger the shift-out-of-bounds.
Fix this bug by adding a check of bmp->db_agl2size in dbMount since this
field is used in many following functions. The upper bound for this
field is L2MAXL2SIZE - L2MAXAG, thanks for the help of Dave Kleikamp.
Note that, for maintenance, I reorganized error handling code of dbMount.
Reported-by: syzbot+15342c1aa6a00fb7a438@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/jfs/jfs_dmap.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index e75f31b81d63..44600cd7614a 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -155,7 +155,7 @@ int dbMount(struct inode *ipbmap)
struct bmap *bmp;
struct dbmap_disk *dbmp_le;
struct metapage *mp;
- int i;
+ int i, err;
/*
* allocate/initialize the in-memory bmap descriptor
@@ -170,8 +170,8 @@ int dbMount(struct inode *ipbmap)
BMAPBLKNO << JFS_SBI(ipbmap->i_sb)->l2nbperpage,
PSIZE, 0);
if (mp == NULL) {
- kfree(bmp);
- return -EIO;
+ err = -EIO;
+ goto err_kfree_bmp;
}
/* copy the on-disk bmap descriptor to its in-memory version. */
@@ -181,9 +181,8 @@ int dbMount(struct inode *ipbmap)
bmp->db_l2nbperpage = le32_to_cpu(dbmp_le->dn_l2nbperpage);
bmp->db_numag = le32_to_cpu(dbmp_le->dn_numag);
if (!bmp->db_numag) {
- release_metapage(mp);
- kfree(bmp);
- return -EINVAL;
+ err = -EINVAL;
+ goto err_release_metapage;
}
bmp->db_maxlevel = le32_to_cpu(dbmp_le->dn_maxlevel);
@@ -194,6 +193,11 @@ int dbMount(struct inode *ipbmap)
bmp->db_agwidth = le32_to_cpu(dbmp_le->dn_agwidth);
bmp->db_agstart = le32_to_cpu(dbmp_le->dn_agstart);
bmp->db_agl2size = le32_to_cpu(dbmp_le->dn_agl2size);
+ if (bmp->db_agl2size > L2MAXL2SIZE - L2MAXAG) {
+ err = -EINVAL;
+ goto err_release_metapage;
+ }
+
for (i = 0; i < MAXAG; i++)
bmp->db_agfree[i] = le64_to_cpu(dbmp_le->dn_agfree[i]);
bmp->db_agsize = le64_to_cpu(dbmp_le->dn_agsize);
@@ -214,6 +218,12 @@ int dbMount(struct inode *ipbmap)
BMAP_LOCK_INIT(bmp);
return (0);
+
+err_release_metapage:
+ release_metapage(mp);
+err_kfree_bmp:
+ kfree(bmp);
+ return err;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 621/731] udf: Avoid double brelse() in udf_rename()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (619 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 620/731] fs: jfs: fix shift-out-of-bounds in dbAllocAG Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 622/731] jfs: Fix fortify moan in symlink Greg Kroah-Hartman
` (120 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+7902cd7684bc35306224,
Shigeru Yoshida, Jan Kara, Sasha Levin
From: Shigeru Yoshida <syoshida@redhat.com>
[ Upstream commit c791730f2554a9ebb8f18df9368dc27d4ebc38c2 ]
syzbot reported a warning like below [1]:
VFS: brelse: Trying to free free buffer
WARNING: CPU: 2 PID: 7301 at fs/buffer.c:1145 __brelse+0x67/0xa0
...
Call Trace:
<TASK>
invalidate_bh_lru+0x99/0x150
smp_call_function_many_cond+0xe2a/0x10c0
? generic_remap_file_range_prep+0x50/0x50
? __brelse+0xa0/0xa0
? __mutex_lock+0x21c/0x12d0
? smp_call_on_cpu+0x250/0x250
? rcu_read_lock_sched_held+0xb/0x60
? lock_release+0x587/0x810
? __brelse+0xa0/0xa0
? generic_remap_file_range_prep+0x50/0x50
on_each_cpu_cond_mask+0x3c/0x80
blkdev_flush_mapping+0x13a/0x2f0
blkdev_put_whole+0xd3/0xf0
blkdev_put+0x222/0x760
deactivate_locked_super+0x96/0x160
deactivate_super+0xda/0x100
cleanup_mnt+0x222/0x3d0
task_work_run+0x149/0x240
? task_work_cancel+0x30/0x30
do_exit+0xb29/0x2a40
? reacquire_held_locks+0x4a0/0x4a0
? do_raw_spin_lock+0x12a/0x2b0
? mm_update_next_owner+0x7c0/0x7c0
? rwlock_bug.part.0+0x90/0x90
? zap_other_threads+0x234/0x2d0
do_group_exit+0xd0/0x2a0
__x64_sys_exit_group+0x3a/0x50
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The cause of the issue is that brelse() is called on both ofibh.sbh
and ofibh.ebh by udf_find_entry() when it returns NULL. However,
brelse() is called by udf_rename(), too. So, b_count on buffer_head
becomes unbalanced.
This patch fixes the issue by not calling brelse() by udf_rename()
when udf_find_entry() returns NULL.
Link: https://syzkaller.appspot.com/bug?id=8297f45698159c6bca8a1f87dc983667c1a1c851 [1]
Reported-by: syzbot+7902cd7684bc35306224@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221023095741.271430-1-syoshida@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/udf/namei.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index 865e658535b1..0e30a50060d9 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -1091,8 +1091,9 @@ static int udf_rename(struct user_namespace *mnt_userns, struct inode *old_dir,
return -EINVAL;
ofi = udf_find_entry(old_dir, &old_dentry->d_name, &ofibh, &ocfi);
- if (IS_ERR(ofi)) {
- retval = PTR_ERR(ofi);
+ if (!ofi || IS_ERR(ofi)) {
+ if (IS_ERR(ofi))
+ retval = PTR_ERR(ofi);
goto end_rename;
}
@@ -1101,8 +1102,7 @@ static int udf_rename(struct user_namespace *mnt_userns, struct inode *old_dir,
brelse(ofibh.sbh);
tloc = lelb_to_cpu(ocfi.icb.extLocation);
- if (!ofi || udf_get_lb_pblock(old_dir->i_sb, &tloc, 0)
- != old_inode->i_ino)
+ if (udf_get_lb_pblock(old_dir->i_sb, &tloc, 0) != old_inode->i_ino)
goto end_rename;
nfi = udf_find_entry(new_dir, &new_dentry->d_name, &nfibh, &ncfi);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 622/731] jfs: Fix fortify moan in symlink
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (620 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 621/731] udf: Avoid double brelse() in udf_rename() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 623/731] fs: jfs: fix shift-out-of-bounds in dbDiscardAG Greg Kroah-Hartman
` (119 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+5fc38b2ddbbca7f5c680,
Dr. David Alan Gilbert, Kees Cook, Dave Kleikamp, Sasha Levin
From: Dr. David Alan Gilbert <linux@treblig.org>
[ Upstream commit ebe060369f8d6e4588b115f252bebf5ba4d64350 ]
JFS has in jfs_incore.h:
/* _inline may overflow into _inline_ea when needed */
/* _inline_ea may overlay the last part of
* file._xtroot if maxentry = XTROOTINITSLOT
*/
union {
struct {
/* 128: inline symlink */
unchar _inline[128];
/* 128: inline extended attr */
unchar _inline_ea[128];
};
unchar _inline_all[256];
and currently the symlink code copies into _inline;
if this is larger than 128 bytes it triggers a fortify warning of the
form:
memcpy: detected field-spanning write (size 132) of single field
"ip->i_link" at fs/jfs/namei.c:950 (size 18446744073709551615)
when it's actually OK.
Copy it into _inline_all instead.
Reported-by: syzbot+5fc38b2ddbbca7f5c680@syzkaller.appspotmail.com
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/jfs/namei.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c
index 9db4f5789c0e..4fbbf88435e6 100644
--- a/fs/jfs/namei.c
+++ b/fs/jfs/namei.c
@@ -946,7 +946,7 @@ static int jfs_symlink(struct user_namespace *mnt_userns, struct inode *dip,
if (ssize <= IDATASIZE) {
ip->i_op = &jfs_fast_symlink_inode_operations;
- ip->i_link = JFS_IP(ip)->i_inline;
+ ip->i_link = JFS_IP(ip)->i_inline_all;
memcpy(ip->i_link, name, ssize);
ip->i_size = ssize - 1;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 623/731] fs: jfs: fix shift-out-of-bounds in dbDiscardAG
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (621 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 622/731] jfs: Fix fortify moan in symlink Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 624/731] ACPICA: Fix error code path in acpi_ds_call_control_method() Greg Kroah-Hartman
` (118 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hoi Pok Wu, Dave Kleikamp, Sasha Levin
From: Hoi Pok Wu <wuhoipok@gmail.com>
[ Upstream commit 25e70c6162f207828dd405b432d8f2a98dbf7082 ]
This should be applied to most URSAN bugs found recently by syzbot,
by guarding the dbMount. As syzbot feeding rubbish into the bmap
descriptor.
Signed-off-by: Hoi Pok Wu <wuhoipok@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/jfs/jfs_dmap.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 44600cd7614a..f401bc05d5ff 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -198,6 +198,11 @@ int dbMount(struct inode *ipbmap)
goto err_release_metapage;
}
+ if (((bmp->db_mapsize - 1) >> bmp->db_agl2size) > MAXAG) {
+ err = -EINVAL;
+ goto err_release_metapage;
+ }
+
for (i = 0; i < MAXAG; i++)
bmp->db_agfree[i] = le64_to_cpu(dbmp_le->dn_agfree[i]);
bmp->db_agsize = le64_to_cpu(dbmp_le->dn_agsize);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 624/731] ACPICA: Fix error code path in acpi_ds_call_control_method()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (622 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 623/731] fs: jfs: fix shift-out-of-bounds in dbDiscardAG Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 625/731] nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset() Greg Kroah-Hartman
` (117 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen Zhongjin, Rafael J. Wysocki,
Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit 404ec60438add1afadaffaed34bb5fe4ddcadd40 ]
A use-after-free in acpi_ps_parse_aml() after a failing invocaion of
acpi_ds_call_control_method() is reported by KASAN [1] and code
inspection reveals that next_walk_state pushed to the thread by
acpi_ds_create_walk_state() is freed on errors, but it is not popped
from the thread beforehand. Thus acpi_ds_get_current_walk_state()
called by acpi_ps_parse_aml() subsequently returns it as the new
walk state which is incorrect.
To address this, make acpi_ds_call_control_method() call
acpi_ds_pop_walk_state() to pop next_walk_state from the thread before
returning an error.
Link: https://lore.kernel.org/linux-acpi/20221019073443.248215-1-chenzhongjin@huawei.com/ # [1]
Reported-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/acpica/dsmethod.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c
index 8e011e59b9b4..ee1832ba39a2 100644
--- a/drivers/acpi/acpica/dsmethod.c
+++ b/drivers/acpi/acpica/dsmethod.c
@@ -517,7 +517,7 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
if (!info) {
status = AE_NO_MEMORY;
- goto cleanup;
+ goto pop_walk_state;
}
info->parameters = &this_walk_state->operands[0];
@@ -529,7 +529,7 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
ACPI_FREE(info);
if (ACPI_FAILURE(status)) {
- goto cleanup;
+ goto pop_walk_state;
}
next_walk_state->method_nesting_depth =
@@ -575,6 +575,12 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
return_ACPI_STATUS(status);
+pop_walk_state:
+
+ /* On error, pop the walk state to be deleted from thread */
+
+ acpi_ds_pop_walk_state(thread);
+
cleanup:
/* On error, we must terminate the method properly */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 625/731] nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (623 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 624/731] ACPICA: Fix error code path in acpi_ds_call_control_method() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 626/731] nilfs2: fix shift-out-of-bounds due to too large exponent of block size Greg Kroah-Hartman
` (116 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ryusuke Konishi,
syzbot+e91619dd4c11c4960706, Andrew Morton, Sasha Levin
From: Ryusuke Konishi <konishi.ryusuke@gmail.com>
[ Upstream commit 610a2a3d7d8be3537458a378ec69396a76c385b6 ]
Patch series "nilfs2: fix UBSAN shift-out-of-bounds warnings on mount
time".
The first patch fixes a bug reported by syzbot, and the second one fixes
the remaining bug of the same kind. Although they are triggered by the
same super block data anomaly, I divided it into the above two because the
details of the issues and how to fix it are different.
Both are required to eliminate the shift-out-of-bounds issues at mount
time.
This patch (of 2):
If the block size exponent information written in an on-disk superblock is
corrupted, nilfs_sb2_bad_offset helper function can trigger
shift-out-of-bounds warning followed by a kernel panic (if panic_on_warn
is set):
shift exponent 38983 is too large for 64-bit type 'unsigned long long'
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:151 [inline]
__ubsan_handle_shift_out_of_bounds+0x33d/0x3b0 lib/ubsan.c:322
nilfs_sb2_bad_offset fs/nilfs2/the_nilfs.c:449 [inline]
nilfs_load_super_block+0xdf5/0xe00 fs/nilfs2/the_nilfs.c:523
init_nilfs+0xb7/0x7d0 fs/nilfs2/the_nilfs.c:577
nilfs_fill_super+0xb1/0x5d0 fs/nilfs2/super.c:1047
nilfs_mount+0x613/0x9b0 fs/nilfs2/super.c:1317
...
In addition, since nilfs_sb2_bad_offset() performs multiplication without
considering the upper bound, the computation may overflow if the disk
layout parameters are not normal.
This fixes these issues by inserting preliminary sanity checks for those
parameters and by converting the comparison from one involving
multiplication and left bit-shifting to one using division and right
bit-shifting.
Link: https://lkml.kernel.org/r/20221027044306.42774-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20221027044306.42774-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+e91619dd4c11c4960706@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nilfs2/the_nilfs.c | 31 +++++++++++++++++++++++++++----
1 file changed, 27 insertions(+), 4 deletions(-)
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index 16994598a8db..6a86acd35696 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -13,6 +13,7 @@
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/random.h>
+#include <linux/log2.h>
#include <linux/crc32.h>
#include "nilfs.h"
#include "segment.h"
@@ -443,11 +444,33 @@ static int nilfs_valid_sb(struct nilfs_super_block *sbp)
return crc == le32_to_cpu(sbp->s_sum);
}
-static int nilfs_sb2_bad_offset(struct nilfs_super_block *sbp, u64 offset)
+/**
+ * nilfs_sb2_bad_offset - check the location of the second superblock
+ * @sbp: superblock raw data buffer
+ * @offset: byte offset of second superblock calculated from device size
+ *
+ * nilfs_sb2_bad_offset() checks if the position on the second
+ * superblock is valid or not based on the filesystem parameters
+ * stored in @sbp. If @offset points to a location within the segment
+ * area, or if the parameters themselves are not normal, it is
+ * determined to be invalid.
+ *
+ * Return Value: true if invalid, false if valid.
+ */
+static bool nilfs_sb2_bad_offset(struct nilfs_super_block *sbp, u64 offset)
{
- return offset < ((le64_to_cpu(sbp->s_nsegments) *
- le32_to_cpu(sbp->s_blocks_per_segment)) <<
- (le32_to_cpu(sbp->s_log_block_size) + 10));
+ unsigned int shift_bits = le32_to_cpu(sbp->s_log_block_size);
+ u32 blocks_per_segment = le32_to_cpu(sbp->s_blocks_per_segment);
+ u64 nsegments = le64_to_cpu(sbp->s_nsegments);
+ u64 index;
+
+ if (blocks_per_segment < NILFS_SEG_MIN_BLOCKS ||
+ shift_bits > ilog2(NILFS_MAX_BLOCK_SIZE) - BLOCK_SIZE_BITS)
+ return true;
+
+ index = offset >> (shift_bits + BLOCK_SIZE_BITS);
+ do_div(index, blocks_per_segment);
+ return index < nsegments;
}
static void nilfs_release_super_block(struct the_nilfs *nilfs)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 626/731] nilfs2: fix shift-out-of-bounds due to too large exponent of block size
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (624 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 625/731] nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 627/731] acct: fix potential integer overflow in encode_comp_t() Greg Kroah-Hartman
` (115 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ryusuke Konishi, Andrew Morton, Sasha Levin
From: Ryusuke Konishi <konishi.ryusuke@gmail.com>
[ Upstream commit ebeccaaef67a4895d2496ab8d9c2fb8d89201211 ]
If field s_log_block_size of superblock data is corrupted and too large,
init_nilfs() and load_nilfs() still can trigger a shift-out-of-bounds
warning followed by a kernel panic (if panic_on_warn is set):
shift exponent 38973 is too large for 32-bit type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0xcd/0x134
ubsan_epilogue+0xb/0x50
__ubsan_handle_shift_out_of_bounds.cold.12+0x17b/0x1f5
init_nilfs.cold.11+0x18/0x1d [nilfs2]
nilfs_mount+0x9b5/0x12b0 [nilfs2]
...
This fixes the issue by adding and using a new helper function for getting
block size with sanity check.
Link: https://lkml.kernel.org/r/20221027044306.42774-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nilfs2/the_nilfs.c | 42 ++++++++++++++++++++++++++++++++++++++----
1 file changed, 38 insertions(+), 4 deletions(-)
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index 6a86acd35696..6aa6cef0757f 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -193,6 +193,34 @@ static int nilfs_store_log_cursor(struct the_nilfs *nilfs,
return ret;
}
+/**
+ * nilfs_get_blocksize - get block size from raw superblock data
+ * @sb: super block instance
+ * @sbp: superblock raw data buffer
+ * @blocksize: place to store block size
+ *
+ * nilfs_get_blocksize() calculates the block size from the block size
+ * exponent information written in @sbp and stores it in @blocksize,
+ * or aborts with an error message if it's too large.
+ *
+ * Return Value: On success, 0 is returned. If the block size is too
+ * large, -EINVAL is returned.
+ */
+static int nilfs_get_blocksize(struct super_block *sb,
+ struct nilfs_super_block *sbp, int *blocksize)
+{
+ unsigned int shift_bits = le32_to_cpu(sbp->s_log_block_size);
+
+ if (unlikely(shift_bits >
+ ilog2(NILFS_MAX_BLOCK_SIZE) - BLOCK_SIZE_BITS)) {
+ nilfs_err(sb, "too large filesystem blocksize: 2 ^ %u KiB",
+ shift_bits);
+ return -EINVAL;
+ }
+ *blocksize = BLOCK_SIZE << shift_bits;
+ return 0;
+}
+
/**
* load_nilfs - load and recover the nilfs
* @nilfs: the_nilfs structure to be released
@@ -246,11 +274,15 @@ int load_nilfs(struct the_nilfs *nilfs, struct super_block *sb)
nilfs->ns_sbwtime = le64_to_cpu(sbp[0]->s_wtime);
/* verify consistency between two super blocks */
- blocksize = BLOCK_SIZE << le32_to_cpu(sbp[0]->s_log_block_size);
+ err = nilfs_get_blocksize(sb, sbp[0], &blocksize);
+ if (err)
+ goto scan_error;
+
if (blocksize != nilfs->ns_blocksize) {
nilfs_warn(sb,
"blocksize differs between two super blocks (%d != %d)",
blocksize, nilfs->ns_blocksize);
+ err = -EINVAL;
goto scan_error;
}
@@ -609,9 +641,11 @@ int init_nilfs(struct the_nilfs *nilfs, struct super_block *sb, char *data)
if (err)
goto failed_sbh;
- blocksize = BLOCK_SIZE << le32_to_cpu(sbp->s_log_block_size);
- if (blocksize < NILFS_MIN_BLOCK_SIZE ||
- blocksize > NILFS_MAX_BLOCK_SIZE) {
+ err = nilfs_get_blocksize(sb, sbp, &blocksize);
+ if (err)
+ goto failed_sbh;
+
+ if (blocksize < NILFS_MIN_BLOCK_SIZE) {
nilfs_err(sb,
"couldn't mount because of unsupported filesystem blocksize %d",
blocksize);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 627/731] acct: fix potential integer overflow in encode_comp_t()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (625 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 626/731] nilfs2: fix shift-out-of-bounds due to too large exponent of block size Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 628/731] hfs: fix OOB Read in __hfs_brec_find Greg Kroah-Hartman
` (114 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zheng Yejian, Hanjun Guo,
Randy Dunlap, Vlastimil Babka, Zhang Jinhao, Andrew Morton,
Sasha Levin
From: Zheng Yejian <zhengyejian1@huawei.com>
[ Upstream commit c5f31c655bcc01b6da53b836ac951c1556245305 ]
The integer overflow is descripted with following codes:
> 317 static comp_t encode_comp_t(u64 value)
> 318 {
> 319 int exp, rnd;
......
> 341 exp <<= MANTSIZE;
> 342 exp += value;
> 343 return exp;
> 344 }
Currently comp_t is defined as type of '__u16', but the variable 'exp' is
type of 'int', so overflow would happen when variable 'exp' in line 343 is
greater than 65535.
Link: https://lkml.kernel.org/r/20210515140631.369106-3-zhengyejian1@huawei.com
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Jinhao <zhangjinhao2@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/acct.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/kernel/acct.c b/kernel/acct.c
index 23a7ab8e6cbc..2b5cc63eb295 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -331,6 +331,8 @@ static comp_t encode_comp_t(unsigned long value)
exp++;
}
+ if (exp > (((comp_t) ~0U) >> MANTSIZE))
+ return (comp_t) ~0U;
/*
* Clean it up and polish it off.
*/
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 628/731] hfs: fix OOB Read in __hfs_brec_find
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (626 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 627/731] acct: fix potential integer overflow in encode_comp_t() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 629/731] drm/etnaviv: add missing quirks for GC300 Greg Kroah-Hartman
` (113 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, ZhangPeng,
syzbot+e836ff7133ac02be825f, Damien Le Moal, Ira Weiny,
Jeff Layton, Kefeng Wang, Matthew Wilcox, Nanyong Sun,
Viacheslav Dubeyko, Andrew Morton, Sasha Levin
From: ZhangPeng <zhangpeng362@huawei.com>
[ Upstream commit 8d824e69d9f3fa3121b2dda25053bae71e2460d2 ]
Syzbot reported a OOB read bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in hfs_strcmp+0x117/0x190
fs/hfs/string.c:84
Read of size 1 at addr ffff88807eb62c4e by task kworker/u4:1/11
CPU: 1 PID: 11 Comm: kworker/u4:1 Not tainted
6.1.0-rc6-syzkaller-00308-g644e9524388a #0
Workqueue: writeback wb_workfn (flush-7:0)
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:284
print_report+0x107/0x1f0 mm/kasan/report.c:395
kasan_report+0xcd/0x100 mm/kasan/report.c:495
hfs_strcmp+0x117/0x190 fs/hfs/string.c:84
__hfs_brec_find+0x213/0x5c0 fs/hfs/bfind.c:75
hfs_brec_find+0x276/0x520 fs/hfs/bfind.c:138
hfs_write_inode+0x34c/0xb40 fs/hfs/inode.c:462
write_inode fs/fs-writeback.c:1440 [inline]
If the input inode of hfs_write_inode() is incorrect:
struct inode
struct hfs_inode_info
struct hfs_cat_key
struct hfs_name
u8 len # len is greater than HFS_NAMELEN(31) which is the
maximum length of an HFS filename
OOB read occurred:
hfs_write_inode()
hfs_brec_find()
__hfs_brec_find()
hfs_cat_keycmp()
hfs_strcmp() # OOB read occurred due to len is too large
Fix this by adding a Check on len in hfs_write_inode() before calling
hfs_brec_find().
Link: https://lkml.kernel.org/r/20221130065959.2168236-1-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reported-by: <syzbot+e836ff7133ac02be825f@syzkaller.appspotmail.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/hfs/inode.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 4a95a92546a0..a58a5b733224 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -456,6 +456,8 @@ int hfs_write_inode(struct inode *inode, struct writeback_control *wbc)
/* panic? */
return -EIO;
+ if (HFS_I(main_inode)->cat_key.CName.len > HFS_NAMELEN)
+ return -EIO;
fd.search_key->cat = HFS_I(main_inode)->cat_key;
if (hfs_brec_find(&fd))
/* panic? */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 629/731] drm/etnaviv: add missing quirks for GC300
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (627 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 628/731] hfs: fix OOB Read in __hfs_brec_find Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 630/731] media: imx-jpeg: Disable useless interrupt to avoid kernel panic Greg Kroah-Hartman
` (112 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Doug Brown, Christian Gmeiner,
Lucas Stach, Sasha Levin
From: Doug Brown <doug@schmorgal.com>
[ Upstream commit cc7d3fb446a91f24978a6aa59cbb578f92e22242 ]
The GC300's features register doesn't specify that a 2D pipe is
available, and like the GC600, its idle register reports zero bits where
modules aren't present.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index cc5b07f86346..e8ff70be449a 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -416,6 +416,12 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu)
if (gpu->identity.model == chipModel_GC700)
gpu->identity.features &= ~chipFeatures_FAST_CLEAR;
+ /* These models/revisions don't have the 2D pipe bit */
+ if ((gpu->identity.model == chipModel_GC500 &&
+ gpu->identity.revision <= 2) ||
+ gpu->identity.model == chipModel_GC300)
+ gpu->identity.features |= chipFeatures_PIPE_2D;
+
if ((gpu->identity.model == chipModel_GC500 &&
gpu->identity.revision < 2) ||
(gpu->identity.model == chipModel_GC300 &&
@@ -449,8 +455,9 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu)
gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_5);
}
- /* GC600 idle register reports zero bits where modules aren't present */
- if (gpu->identity.model == chipModel_GC600)
+ /* GC600/300 idle register reports zero bits where modules aren't present */
+ if (gpu->identity.model == chipModel_GC600 ||
+ gpu->identity.model == chipModel_GC300)
gpu->idle_mask = VIVS_HI_IDLE_STATE_TX |
VIVS_HI_IDLE_STATE_RA |
VIVS_HI_IDLE_STATE_SE |
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 630/731] media: imx-jpeg: Disable useless interrupt to avoid kernel panic
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (628 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 629/731] drm/etnaviv: add missing quirks for GC300 Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 631/731] brcmfmac: return error when getting invalid max_flowrings from dongle Greg Kroah-Hartman
` (111 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ming Qian, Mirela Rabulea,
Hans Verkuil, Sasha Levin
From: Ming Qian <ming.qian@nxp.com>
[ Upstream commit c3720e65c9013a7b2a5dbb63e6bf6d74a35dd894 ]
There is a hardware bug that the interrupt STMBUF_HALF may be triggered
after or when disable interrupt.
It may led to unexpected kernel panic.
And interrupt STMBUF_HALF and STMBUF_RTND have no other effect.
So disable them and the unused interrupts.
meanwhile clear the interrupt status when disable interrupt.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/imx-jpeg/mxc-jpeg-hw.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/imx-jpeg/mxc-jpeg-hw.c b/drivers/media/platform/imx-jpeg/mxc-jpeg-hw.c
index 718b7b08f93e..8936d5ce886c 100644
--- a/drivers/media/platform/imx-jpeg/mxc-jpeg-hw.c
+++ b/drivers/media/platform/imx-jpeg/mxc-jpeg-hw.c
@@ -76,12 +76,14 @@ void print_wrapper_info(struct device *dev, void __iomem *reg)
void mxc_jpeg_enable_irq(void __iomem *reg, int slot)
{
- writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
+ writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_STATUS));
+ writel(0xF0C, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
}
void mxc_jpeg_disable_irq(void __iomem *reg, int slot)
{
writel(0x0, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
+ writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_STATUS));
}
void mxc_jpeg_sw_reset(void __iomem *reg)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 631/731] brcmfmac: return error when getting invalid max_flowrings from dongle
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (629 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 630/731] media: imx-jpeg: Disable useless interrupt to avoid kernel panic Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 632/731] wifi: ath9k: verify the expected usb_endpoints are present Greg Kroah-Hartman
` (110 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wright Feng, Chi-hsien Lin, Ian Lin,
Kalle Valo, Sasha Levin
From: Wright Feng <wright.feng@cypress.com>
[ Upstream commit 2aca4f3734bd717e04943ddf340d49ab62299a00 ]
When firmware hit trap at initialization, host will read abnormal
max_flowrings number from dongle, and it will cause kernel panic when
doing iowrite to initialize dongle ring.
To detect this error at early stage, we directly return error when getting
invalid max_flowrings(>256).
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220929031001.9962-3-ian.lin@infineon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 358021a33b8a..f5f5a002fdcf 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1118,6 +1118,10 @@ static int brcmf_pcie_init_ringbuffers(struct brcmf_pciedev_info *devinfo)
BRCMF_NROF_H2D_COMMON_MSGRINGS;
max_completionrings = BRCMF_NROF_D2H_COMMON_MSGRINGS;
}
+ if (max_flowrings > 256) {
+ brcmf_err(bus, "invalid max_flowrings(%d)\n", max_flowrings);
+ return -EIO;
+ }
if (devinfo->dma_idx_sz != 0) {
bufsz = (max_submissionrings + max_completionrings) *
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 632/731] wifi: ath9k: verify the expected usb_endpoints are present
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (630 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 631/731] brcmfmac: return error when getting invalid max_flowrings from dongle Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 633/731] wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out Greg Kroah-Hartman
` (109 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alan Stern, Fedor Pchelkin,
Alexey Khoroshilov, Toke Høiland-Jørgensen, Kalle Valo,
Sasha Levin
From: Fedor Pchelkin <pchelkin@ispras.ru>
[ Upstream commit 16ef02bad239f11f322df8425d302be62f0443ce ]
The bug arises when a USB device claims to be an ATH9K but doesn't
have the expected endpoints. (In this case there was an interrupt
endpoint where the driver expected a bulk endpoint.) The kernel
needs to be able to handle such devices without getting an internal error.
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 3 PID: 500 at drivers/usb/core/urb.c:493 usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Modules linked in:
CPU: 3 PID: 500 Comm: kworker/3:2 Not tainted 5.10.135-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events request_firmware_work_func
RIP: 0010:usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Call Trace:
ath9k_hif_usb_alloc_rx_urbs drivers/net/wireless/ath/ath9k/hif_usb.c:908 [inline]
ath9k_hif_usb_alloc_urbs+0x75e/0x1010 drivers/net/wireless/ath/ath9k/hif_usb.c:1019
ath9k_hif_usb_dev_init drivers/net/wireless/ath/ath9k/hif_usb.c:1109 [inline]
ath9k_hif_usb_firmware_cb+0x142/0x530 drivers/net/wireless/ath/ath9k/hif_usb.c:1242
request_firmware_work_func+0x12e/0x240 drivers/base/firmware_loader/main.c:1097
process_one_work+0x9af/0x1600 kernel/workqueue.c:2279
worker_thread+0x61d/0x12f0 kernel/workqueue.c:2425
kthread+0x3b4/0x4a0 kernel/kthread.c:313
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:299
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221008211532.74583-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index e5d5b0761881..f938ac1a4abd 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1328,10 +1328,24 @@ static int send_eject_command(struct usb_interface *interface)
static int ath9k_hif_usb_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
+ struct usb_endpoint_descriptor *bulk_in, *bulk_out, *int_in, *int_out;
struct usb_device *udev = interface_to_usbdev(interface);
+ struct usb_host_interface *alt;
struct hif_device_usb *hif_dev;
int ret = 0;
+ /* Verify the expected endpoints are present */
+ alt = interface->cur_altsetting;
+ if (usb_find_common_endpoints(alt, &bulk_in, &bulk_out, &int_in, &int_out) < 0 ||
+ usb_endpoint_num(bulk_in) != USB_WLAN_RX_PIPE ||
+ usb_endpoint_num(bulk_out) != USB_WLAN_TX_PIPE ||
+ usb_endpoint_num(int_in) != USB_REG_IN_PIPE ||
+ usb_endpoint_num(int_out) != USB_REG_OUT_PIPE) {
+ dev_err(&udev->dev,
+ "ath9k_htc: Device endpoint numbers are not the expected ones\n");
+ return -ENODEV;
+ }
+
if (id->driver_info == STORAGE_DEVICE)
return send_eject_command(interface);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 633/731] wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (631 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 632/731] wifi: ath9k: verify the expected usb_endpoints are present Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 634/731] ASoC: codecs: rt298: Add quirk for KBL-R RVP platform Greg Kroah-Hartman
` (108 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+95001b1fd6dfcc716c29,
Shigeru Yoshida, Kalle Valo, Sasha Levin
From: Shigeru Yoshida <syoshida@redhat.com>
[ Upstream commit b6702a942a069c2a975478d719e98d83cdae1797 ]
syzkaller reported use-after-free with the stack trace like below [1]:
[ 38.960489][ C3] ==================================================================
[ 38.963216][ C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240
[ 38.964950][ C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0
[ 38.966363][ C3]
[ 38.967053][ C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18
[ 38.968464][ C3] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[ 38.969959][ C3] Call Trace:
[ 38.970841][ C3] <IRQ>
[ 38.971663][ C3] dump_stack_lvl+0xfc/0x174
[ 38.972620][ C3] print_report.cold+0x2c3/0x752
[ 38.973626][ C3] ? ar5523_cmd_tx_cb+0x220/0x240
[ 38.974644][ C3] kasan_report+0xb1/0x1d0
[ 38.975720][ C3] ? ar5523_cmd_tx_cb+0x220/0x240
[ 38.976831][ C3] ar5523_cmd_tx_cb+0x220/0x240
[ 38.978412][ C3] __usb_hcd_giveback_urb+0x353/0x5b0
[ 38.979755][ C3] usb_hcd_giveback_urb+0x385/0x430
[ 38.981266][ C3] dummy_timer+0x140c/0x34e0
[ 38.982925][ C3] ? notifier_call_chain+0xb5/0x1e0
[ 38.984761][ C3] ? rcu_read_lock_sched_held+0xb/0x60
[ 38.986242][ C3] ? lock_release+0x51c/0x790
[ 38.987323][ C3] ? _raw_read_unlock_irqrestore+0x37/0x70
[ 38.988483][ C3] ? __wake_up_common_lock+0xde/0x130
[ 38.989621][ C3] ? reacquire_held_locks+0x4a0/0x4a0
[ 38.990777][ C3] ? lock_acquire+0x472/0x550
[ 38.991919][ C3] ? rcu_read_lock_sched_held+0xb/0x60
[ 38.993138][ C3] ? lock_acquire+0x472/0x550
[ 38.994890][ C3] ? dummy_urb_enqueue+0x860/0x860
[ 38.996266][ C3] ? do_raw_spin_unlock+0x16f/0x230
[ 38.997670][ C3] ? dummy_urb_enqueue+0x860/0x860
[ 38.999116][ C3] call_timer_fn+0x1a0/0x6a0
[ 39.000668][ C3] ? add_timer_on+0x4a0/0x4a0
[ 39.002137][ C3] ? reacquire_held_locks+0x4a0/0x4a0
[ 39.003809][ C3] ? __next_timer_interrupt+0x226/0x2a0
[ 39.005509][ C3] __run_timers.part.0+0x69a/0xac0
[ 39.007025][ C3] ? dummy_urb_enqueue+0x860/0x860
[ 39.008716][ C3] ? call_timer_fn+0x6a0/0x6a0
[ 39.010254][ C3] ? cpuacct_percpu_seq_show+0x10/0x10
[ 39.011795][ C3] ? kvm_sched_clock_read+0x14/0x40
[ 39.013277][ C3] ? sched_clock_cpu+0x69/0x2b0
[ 39.014724][ C3] run_timer_softirq+0xb6/0x1d0
[ 39.016196][ C3] __do_softirq+0x1d2/0x9be
[ 39.017616][ C3] __irq_exit_rcu+0xeb/0x190
[ 39.019004][ C3] irq_exit_rcu+0x5/0x20
[ 39.020361][ C3] sysvec_apic_timer_interrupt+0x8f/0xb0
[ 39.021965][ C3] </IRQ>
[ 39.023237][ C3] <TASK>
In ar5523_probe(), ar5523_host_available() calls ar5523_cmd() as below
(there are other functions which finally call ar5523_cmd()):
ar5523_probe()
-> ar5523_host_available()
-> ar5523_cmd_read()
-> ar5523_cmd()
If ar5523_cmd() timed out, then ar5523_host_available() failed and
ar5523_probe() freed the device structure. So, ar5523_cmd_tx_cb()
might touch the freed structure.
This patch fixes this issue by canceling in-flight tx cmd if submitted
urb timed out.
Link: https://syzkaller.appspot.com/bug?id=9e12b2d54300842b71bdd18b54971385ff0d0d3a [1]
Reported-by: syzbot+95001b1fd6dfcc716c29@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221009183223.420015-1-syoshida@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ar5523/ar5523.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 1baec4b412c8..efe38b2c1df7 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -241,6 +241,11 @@ static void ar5523_cmd_tx_cb(struct urb *urb)
}
}
+static void ar5523_cancel_tx_cmd(struct ar5523 *ar)
+{
+ usb_kill_urb(ar->tx_cmd.urb_tx);
+}
+
static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata,
int ilen, void *odata, int olen, int flags)
{
@@ -280,6 +285,7 @@ static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata,
}
if (!wait_for_completion_timeout(&cmd->done, 2 * HZ)) {
+ ar5523_cancel_tx_cmd(ar);
cmd->odata = NULL;
ar5523_err(ar, "timeout waiting for command %02x reply\n",
code);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 634/731] ASoC: codecs: rt298: Add quirk for KBL-R RVP platform
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (632 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 633/731] wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 635/731] ipmi: fix memleak when unload ipmi driver Greg Kroah-Hartman
` (107 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Amadeusz Sławiński,
Cezary Rojewski, Mark Brown, Sasha Levin
From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
[ Upstream commit 953dbd1cef18ce9ac0d69c1bd735b929fe52a17e ]
KBL-R RVP platforms also use combojack, so we need to enable that
configuration for them.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/rt298.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/sound/soc/codecs/rt298.c b/sound/soc/codecs/rt298.c
index c592c40a7ab3..604754e4b29f 100644
--- a/sound/soc/codecs/rt298.c
+++ b/sound/soc/codecs/rt298.c
@@ -1173,6 +1173,13 @@ static const struct dmi_system_id force_combo_jack_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Geminilake")
}
},
+ {
+ .ident = "Intel Kabylake R RVP",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Kabylake Client platform")
+ }
+ },
{ }
};
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 635/731] ipmi: fix memleak when unload ipmi driver
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (633 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 634/731] ASoC: codecs: rt298: Add quirk for KBL-R RVP platform Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 636/731] drm/amd/display: prevent memory leak Greg Kroah-Hartman
` (106 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Yuchen, Corey Minyard, Sasha Levin
From: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
[ Upstream commit 36992eb6b9b83f7f9cdc8e74fb5799d7b52e83e9 ]
After the IPMI disconnect problem, the memory kept rising and we tried
to unload the driver to free the memory. However, only part of the
free memory is recovered after the driver is uninstalled. Using
ebpf to hook free functions, we find that neither ipmi_user nor
ipmi_smi_msg is free, only ipmi_recv_msg is free.
We find that the deliver_smi_err_response call in clean_smi_msgs does
the destroy processing on each message from the xmit_msg queue without
checking the return value and free ipmi_smi_msg.
deliver_smi_err_response is called only at this location. Adding the
free handling has no effect.
To verify, try using ebpf to trace the free function.
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc rcv
%p\n",retval);} kprobe:free_recv_msg {printf("free recv %p\n",
arg0)} kretprobe:ipmi_alloc_smi_msg {printf("alloc smi %p\n",
retval);} kprobe:free_smi_msg {printf("free smi %p\n",arg0)}'
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221007092617.87597-4-zhangyuchen.lcr@bytedance.com>
[Fixed the comment above handle_one_recv_msg().]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/ipmi/ipmi_msghandler.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 2badf36d4816..8dbc349a2edd 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -3527,12 +3527,16 @@ static void deliver_smi_err_response(struct ipmi_smi *intf,
struct ipmi_smi_msg *msg,
unsigned char err)
{
+ int rv;
msg->rsp[0] = msg->data[0] | 4;
msg->rsp[1] = msg->data[1];
msg->rsp[2] = err;
msg->rsp_size = 3;
- /* It's an error, so it will never requeue, no need to check return. */
- handle_one_recv_msg(intf, msg);
+
+ /* This will never requeue, but it may ask us to free the message. */
+ rv = handle_one_recv_msg(intf, msg);
+ if (rv == 0)
+ ipmi_free_smi_msg(msg);
}
static void cleanup_smi_msgs(struct ipmi_smi *intf)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 636/731] drm/amd/display: prevent memory leak
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (634 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 635/731] ipmi: fix memleak when unload ipmi driver Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 637/731] Revert "drm/amd/display: Limit max DSC target bpp for specific monitors" Greg Kroah-Hartman
` (105 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rodrigo Siqueira, gehao,
Alex Deucher, Sasha Levin
From: gehao <gehao@kylinos.cn>
[ Upstream commit d232afb1f3417ae8194ccf19ad3a8360e70e104e ]
In dce6(0,1,4)_create_resource_pool and dce80_create_resource_pool
the allocated memory should be released if construct pool fails.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: gehao <gehao@kylinos.cn>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c | 3 +++
drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c | 2 ++
2 files changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c b/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
index dcfa0a3efa00..bf72d3f60d7f 100644
--- a/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
@@ -1127,6 +1127,7 @@ struct resource_pool *dce60_create_resource_pool(
if (dce60_construct(num_virtual_links, dc, pool))
return &pool->base;
+ kfree(pool);
BREAK_TO_DEBUGGER();
return NULL;
}
@@ -1324,6 +1325,7 @@ struct resource_pool *dce61_create_resource_pool(
if (dce61_construct(num_virtual_links, dc, pool))
return &pool->base;
+ kfree(pool);
BREAK_TO_DEBUGGER();
return NULL;
}
@@ -1517,6 +1519,7 @@ struct resource_pool *dce64_create_resource_pool(
if (dce64_construct(num_virtual_links, dc, pool))
return &pool->base;
+ kfree(pool);
BREAK_TO_DEBUGGER();
return NULL;
}
diff --git a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
index 725d92e40cd3..52d1f9746e8c 100644
--- a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
@@ -1138,6 +1138,7 @@ struct resource_pool *dce80_create_resource_pool(
if (dce80_construct(num_virtual_links, dc, pool))
return &pool->base;
+ kfree(pool);
BREAK_TO_DEBUGGER();
return NULL;
}
@@ -1337,6 +1338,7 @@ struct resource_pool *dce81_create_resource_pool(
if (dce81_construct(num_virtual_links, dc, pool))
return &pool->base;
+ kfree(pool);
BREAK_TO_DEBUGGER();
return NULL;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 637/731] Revert "drm/amd/display: Limit max DSC target bpp for specific monitors"
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (635 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 636/731] drm/amd/display: prevent memory leak Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 638/731] qed (gcc13): use u16 for fid to be big enough Greg Kroah-Hartman
` (104 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Harry Wentland, Hamza Mahfooz,
Alex Deucher, Sasha Levin
From: Hamza Mahfooz <hamza.mahfooz@amd.com>
[ Upstream commit 6803dfd3a69ccb318772463a86e40929fd4fbac7 ]
This reverts commit 55eea8ef98641f6e1e1c202bd3a49a57c1dd4059.
This quirk is now handled in the DRM core, so we can drop all of
the internal code that was added to handle it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 35 -------------------
1 file changed, 35 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
index d793eec69d61..6fee12c91ef5 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
@@ -40,39 +40,6 @@
#include "dm_helpers.h"
-struct monitor_patch_info {
- unsigned int manufacturer_id;
- unsigned int product_id;
- void (*patch_func)(struct dc_edid_caps *edid_caps, unsigned int param);
- unsigned int patch_param;
-};
-static void set_max_dsc_bpp_limit(struct dc_edid_caps *edid_caps, unsigned int param);
-
-static const struct monitor_patch_info monitor_patch_table[] = {
-{0x6D1E, 0x5BBF, set_max_dsc_bpp_limit, 15},
-{0x6D1E, 0x5B9A, set_max_dsc_bpp_limit, 15},
-};
-
-static void set_max_dsc_bpp_limit(struct dc_edid_caps *edid_caps, unsigned int param)
-{
- if (edid_caps)
- edid_caps->panel_patch.max_dsc_target_bpp_limit = param;
-}
-
-static int amdgpu_dm_patch_edid_caps(struct dc_edid_caps *edid_caps)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(monitor_patch_table); i++)
- if ((edid_caps->manufacturer_id == monitor_patch_table[i].manufacturer_id)
- && (edid_caps->product_id == monitor_patch_table[i].product_id)) {
- monitor_patch_table[i].patch_func(edid_caps, monitor_patch_table[i].patch_param);
- ret++;
- }
-
- return ret;
-}
-
/* dm_helpers_parse_edid_caps
*
* Parse edid caps
@@ -158,8 +125,6 @@ enum dc_edid_status dm_helpers_parse_edid_caps(
kfree(sads);
kfree(sadb);
- amdgpu_dm_patch_edid_caps(edid_caps);
-
return result;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 638/731] qed (gcc13): use u16 for fid to be big enough
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (636 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 637/731] Revert "drm/amd/display: Limit max DSC target bpp for specific monitors" Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 639/731] bpf: make sure skb->len != 0 when redirecting to a tunneling device Greg Kroah-Hartman
` (103 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Martin Liska, Ariel Elior,
Manish Chopra, Jiri Slaby (SUSE),
Jakub Kicinski, Sasha Levin
From: Jiri Slaby (SUSE) <jirislaby@kernel.org>
[ Upstream commit 7d84118229bf7f7290438c85caa8e49de52d50c1 ]
gcc 13 correctly reports overflow in qed_grc_dump_addr_range():
In file included from drivers/net/ethernet/qlogic/qed/qed.h:23,
from drivers/net/ethernet/qlogic/qed/qed_debug.c:10:
drivers/net/ethernet/qlogic/qed/qed_debug.c: In function 'qed_grc_dump_addr_range':
include/linux/qed/qed_if.h:1217:9: error: overflow in conversion from 'int' to 'u8' {aka 'unsigned char'} changes value from '(int)vf_id << 8 | 128' to '128' [-Werror=overflow]
We do:
u8 fid;
...
fid = vf_id << 8 | 128;
Since fid is 16bit (and the stored value above too), fid should be u16,
not u8. Fix that.
Cc: Martin Liska <mliska@suse.cz>
Cc: Ariel Elior <aelior@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20221031114354.10398-1-jirislaby@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/qlogic/qed/qed_debug.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_debug.c b/drivers/net/ethernet/qlogic/qed/qed_debug.c
index 6ab3e60d4928..4b4077cf2d26 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_debug.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_debug.c
@@ -1796,9 +1796,10 @@ static u32 qed_grc_dump_addr_range(struct qed_hwfn *p_hwfn,
u8 split_id)
{
struct dbg_tools_data *dev_data = &p_hwfn->dbg_info;
- u8 port_id = 0, pf_id = 0, vf_id = 0, fid = 0;
+ u8 port_id = 0, pf_id = 0, vf_id = 0;
bool read_using_dmae = false;
u32 thresh;
+ u16 fid;
if (!dump)
return len;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 639/731] bpf: make sure skb->len != 0 when redirecting to a tunneling device
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (637 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 638/731] qed (gcc13): use u16 for fid to be big enough Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 640/731] net: ethernet: ti: Fix return type of netcp_ndo_start_xmit() Greg Kroah-Hartman
` (102 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eric Dumazet,
syzbot+f635e86ec3fa0a37e019, Stanislav Fomichev,
Martin KaFai Lau, Alexei Starovoitov, Sasha Levin
From: Stanislav Fomichev <sdf@google.com>
[ Upstream commit 07ec7b502800ba9f7b8b15cb01dd6556bb41aaca ]
syzkaller managed to trigger another case where skb->len == 0
when we enter __dev_queue_xmit:
WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 skb_assert_len include/linux/skbuff.h:2576 [inline]
WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 __dev_queue_xmit+0x2069/0x35e0 net/core/dev.c:4295
Call Trace:
dev_queue_xmit+0x17/0x20 net/core/dev.c:4406
__bpf_tx_skb net/core/filter.c:2115 [inline]
__bpf_redirect_no_mac net/core/filter.c:2140 [inline]
__bpf_redirect+0x5fb/0xda0 net/core/filter.c:2163
____bpf_clone_redirect net/core/filter.c:2447 [inline]
bpf_clone_redirect+0x247/0x390 net/core/filter.c:2419
bpf_prog_48159a89cb4a9a16+0x59/0x5e
bpf_dispatcher_nop_func include/linux/bpf.h:897 [inline]
__bpf_prog_run include/linux/filter.h:596 [inline]
bpf_prog_run include/linux/filter.h:603 [inline]
bpf_test_run+0x46c/0x890 net/bpf/test_run.c:402
bpf_prog_test_run_skb+0xbdc/0x14c0 net/bpf/test_run.c:1170
bpf_prog_test_run+0x345/0x3c0 kernel/bpf/syscall.c:3648
__sys_bpf+0x43a/0x6c0 kernel/bpf/syscall.c:5005
__do_sys_bpf kernel/bpf/syscall.c:5091 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5089 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5089
do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x61/0xc6
The reproducer doesn't really reproduce outside of syzkaller
environment, so I'm taking a guess here. It looks like we
do generate correct ETH_HLEN-sized packet, but we redirect
the packet to the tunneling device. Before we do so, we
__skb_pull l2 header and arrive again at skb->len == 0.
Doesn't seem like we can do anything better than having
an explicit check after __skb_pull?
Cc: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+f635e86ec3fa0a37e019@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221027225537.353077-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/filter.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/net/core/filter.c b/net/core/filter.c
index 68b1509e6188..2da05622afbe 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2130,6 +2130,10 @@ static int __bpf_redirect_no_mac(struct sk_buff *skb, struct net_device *dev,
if (mlen) {
__skb_pull(skb, mlen);
+ if (unlikely(!skb->len)) {
+ kfree_skb(skb);
+ return -ERANGE;
+ }
/* At ingress, the mac header has already been pulled once.
* At egress, skb_pospull_rcsum has to be done in case that
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 640/731] net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (638 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 639/731] bpf: make sure skb->len != 0 when redirecting to a tunneling device Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 641/731] hamradio: baycom_epp: Fix return type of baycom_send_packet() Greg Kroah-Hartman
` (101 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nathan Chancellor, Kees Cook,
Jakub Kicinski, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 63fe6ff674a96cfcfc0fa8df1051a27aa31c70b4 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/net/ethernet/ti/netcp_core.c:1944:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = netcp_ndo_start_xmit,
^~~~~~~~~~~~~~~~~~~~
1 error generated.
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of
netcp_ndo_start_xmit() to match the prototype's to resolve the warning
and CFI failure.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102160933.1601260-1-nathan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/ti/netcp_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index eda2961c0fe2..07bdeece1723 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c
@@ -1262,7 +1262,7 @@ static int netcp_tx_submit_skb(struct netcp_intf *netcp,
}
/* Submit the packet */
-static int netcp_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t netcp_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
struct netcp_intf *netcp = netdev_priv(ndev);
struct netcp_stats *tx_stats = &netcp->stats;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 641/731] hamradio: baycom_epp: Fix return type of baycom_send_packet()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (639 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 640/731] net: ethernet: ti: Fix return type of netcp_ndo_start_xmit() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 642/731] wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request() Greg Kroah-Hartman
` (100 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nathan Chancellor, Kees Cook,
Jakub Kicinski, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit c5733e5b15d91ab679646ec3149e192996a27d5d ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/net/hamradio/baycom_epp.c:1119:25: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = baycom_send_packet,
^~~~~~~~~~~~~~~~~~
1 error generated.
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of baycom_send_packet()
to match the prototype's to resolve the warning and CFI failure.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102160610.1186145-1-nathan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/hamradio/baycom_epp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 6b6f28d5b8d5..f9d03f7b9101 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -758,7 +758,7 @@ static void epp_bh(struct work_struct *work)
* ===================== network driver interface =========================
*/
-static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
{
struct baycom_state *bc = netdev_priv(dev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 642/731] wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (640 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 641/731] hamradio: baycom_epp: Fix return type of baycom_send_packet() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [Intel-wired-lan] " Greg Kroah-Hartman
` (99 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dokyung Song, Jisoo Jang,
Minsuk Kang, Kalle Valo, Sasha Levin
From: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
[ Upstream commit 81d17f6f3331f03c8eafdacea68ab773426c1e3c ]
This patch fixes a shift-out-of-bounds in brcmfmac that occurs in
BIT(chiprev) when a 'chiprev' provided by the device is too large.
It should also not be equal to or greater than BITS_PER_TYPE(u32)
as we do bitwise AND with a u32 variable and BIT(chiprev). The patch
adds a check that makes the function return NULL if that is the case.
Note that the NULL case is later handled by the bus-specific caller,
brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.
Found by a modified version of syzkaller.
UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
shift exponent 151055786 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack_lvl+0x57/0x7d
ubsan_epilogue+0x5/0x40
__ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb
? lock_chain_count+0x20/0x20
brcmf_fw_alloc_request.cold+0x19/0x3ea
? brcmf_fw_get_firmwares+0x250/0x250
? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0
brcmf_usb_get_fwname+0x114/0x1a0
? brcmf_usb_reset_resume+0x120/0x120
? number+0x6c4/0x9a0
brcmf_c_process_clm_blob+0x168/0x590
? put_dec+0x90/0x90
? enable_ptr_key_workfn+0x20/0x20
? brcmf_common_pd_remove+0x50/0x50
? rcu_read_lock_sched_held+0xa1/0xd0
brcmf_c_preinit_dcmds+0x673/0xc40
? brcmf_c_set_joinpref_default+0x100/0x100
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lock_acquire+0x19d/0x4e0
? find_held_lock+0x2d/0x110
? brcmf_usb_deq+0x1cc/0x260
? mark_held_locks+0x9f/0xe0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? _raw_spin_unlock_irqrestore+0x47/0x50
? trace_hardirqs_on+0x1c/0x120
? brcmf_usb_deq+0x1a7/0x260
? brcmf_usb_rx_fill_all+0x5a/0xf0
brcmf_attach+0x246/0xd40
? wiphy_new_nm+0x1476/0x1d50
? kmemdup+0x30/0x40
brcmf_usb_probe+0x12de/0x1690
? brcmf_usbdev_qinit.constprop.0+0x470/0x470
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
? usb_match_id.part.0+0x88/0xc0
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
? driver_allows_async_probing+0x120/0x120
bus_for_each_drv+0x123/0x1a0
? bus_rescan_devices+0x20/0x20
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? trace_hardirqs_on+0x1c/0x120
__device_attach+0x207/0x330
? device_bind_driver+0xb0/0xb0
? kobject_uevent_env+0x230/0x12c0
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
? __mutex_unlock_slowpath+0xe7/0x660
? __fw_devlink_link_to_suppliers+0x550/0x550
usb_set_configuration+0x984/0x1770
? kernfs_create_link+0x175/0x230
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
? driver_allows_async_probing+0x120/0x120
bus_for_each_drv+0x123/0x1a0
? bus_rescan_devices+0x20/0x20
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? trace_hardirqs_on+0x1c/0x120
__device_attach+0x207/0x330
? device_bind_driver+0xb0/0xb0
? kobject_uevent_env+0x230/0x12c0
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
? __fw_devlink_link_to_suppliers+0x550/0x550
usb_new_device.cold+0x463/0xf66
? hub_disconnect+0x400/0x400
? _raw_spin_unlock_irq+0x24/0x30
hub_event+0x10d5/0x3330
? hub_port_debounce+0x280/0x280
? __lock_acquire+0x1671/0x5790
? wq_calc_node_cpumask+0x170/0x2a0
? lock_release+0x640/0x640
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
process_one_work+0x873/0x13e0
? lock_release+0x640/0x640
? pwq_dec_nr_in_flight+0x320/0x320
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x8b/0xd10
? __kthread_parkme+0xd9/0x1d0
? process_one_work+0x13e0/0x13e0
kthread+0x379/0x450
? _raw_spin_unlock_irq+0x24/0x30
? set_kthread_struct+0x100/0x100
ret_from_fork+0x1f/0x30
Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221024071329.504277-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
index dcbe55b56e43..c54d8722e755 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -746,6 +746,11 @@ brcmf_fw_alloc_request(u32 chip, u32 chiprev,
u32 i, j;
char end = '\0';
+ if (chiprev >= BITS_PER_TYPE(u32)) {
+ brcmf_err("Invalid chip revision %u\n", chiprev);
+ return NULL;
+ }
+
for (i = 0; i < table_size; i++) {
if (mapping_table[i].chipid == chip &&
mapping_table[i].revmask & BIT(chiprev))
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 643/731] igb: Do not free q_vector unless new one was allocated
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 002/731] usb: musb: remove extra check in musb_gadget_vbus_draw Greg Kroah-Hartman
` (740 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jesse Brandeburg, Tony Nguyen,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
intel-wired-lan, netdev, Kees Cook, Michael J. Ruhl,
Jacob Keller, Sasha Levin, Gurucharan
From: Kees Cook <keescook@chromium.org>
[ Upstream commit 0668716506ca66f90d395f36ccdaebc3e0e84801 ]
Avoid potential use-after-free condition under memory pressure. If the
kzalloc() fails, q_vector will be freed but left in the original
adapter->q_vector[v_idx] array position.
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igb/igb_main.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 70667b46858a..b246ff8b7c20 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1204,8 +1204,12 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter,
if (!q_vector) {
q_vector = kzalloc(size, GFP_KERNEL);
} else if (size > ksize(q_vector)) {
- kfree_rcu(q_vector, rcu);
- q_vector = kzalloc(size, GFP_KERNEL);
+ struct igb_q_vector *new_q_vector;
+
+ new_q_vector = kzalloc(size, GFP_KERNEL);
+ if (new_q_vector)
+ kfree_rcu(q_vector, rcu);
+ q_vector = new_q_vector;
} else {
memset(q_vector, 0, size);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [Intel-wired-lan] [PATCH 5.15 643/731] igb: Do not free q_vector unless new one was allocated
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
0 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Sasha Levin, Kees Cook, Greg Kroah-Hartman, patches,
Jesse Brandeburg, Michael J. Ruhl, Eric Dumazet, netdev,
Tony Nguyen, intel-wired-lan, Jakub Kicinski, Paolo Abeni,
David S. Miller
From: Kees Cook <keescook@chromium.org>
[ Upstream commit 0668716506ca66f90d395f36ccdaebc3e0e84801 ]
Avoid potential use-after-free condition under memory pressure. If the
kzalloc() fails, q_vector will be freed but left in the original
adapter->q_vector[v_idx] array position.
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igb/igb_main.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 70667b46858a..b246ff8b7c20 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1204,8 +1204,12 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter,
if (!q_vector) {
q_vector = kzalloc(size, GFP_KERNEL);
} else if (size > ksize(q_vector)) {
- kfree_rcu(q_vector, rcu);
- q_vector = kzalloc(size, GFP_KERNEL);
+ struct igb_q_vector *new_q_vector;
+
+ new_q_vector = kzalloc(size, GFP_KERNEL);
+ if (new_q_vector)
+ kfree_rcu(q_vector, rcu);
+ q_vector = new_q_vector;
} else {
memset(q_vector, 0, size);
}
--
2.35.1
_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 644/731] drm/amdgpu: Fix type of second parameter in trans_msg() callback
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (642 preceding siblings ...)
2022-12-28 14:42 ` [Intel-wired-lan] " Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 645/731] drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback Greg Kroah-Hartman
` (97 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sami Tolvanen, Kees Cook,
Nathan Chancellor, Alex Deucher, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit f0d0f1087333714ee683cc134a95afe331d7ddd9 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c:412:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
.trans_msg = xgpu_ai_mailbox_trans_msg,
^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c:435:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
.trans_msg = xgpu_nv_mailbox_trans_msg,
^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
The type of the second parameter in the prototype should be 'enum
idh_request' instead of 'u32'. Update it to clear up the warnings.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
index ce31d4fdee93..4af3610f4a82 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
@@ -62,6 +62,8 @@ struct amdgpu_vf_error_buffer {
uint64_t data[AMDGPU_VF_ERROR_ENTRY_SIZE];
};
+enum idh_request;
+
/**
* struct amdgpu_virt_ops - amdgpu device virt operations
*/
@@ -71,7 +73,8 @@ struct amdgpu_virt_ops {
int (*req_init_data)(struct amdgpu_device *adev);
int (*reset_gpu)(struct amdgpu_device *adev);
int (*wait_reset)(struct amdgpu_device *adev);
- void (*trans_msg)(struct amdgpu_device *adev, u32 req, u32 data1, u32 data2, u32 data3);
+ void (*trans_msg)(struct amdgpu_device *adev, enum idh_request req,
+ u32 data1, u32 data2, u32 data3);
};
/*
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 645/731] drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (643 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 644/731] drm/amdgpu: Fix type of second parameter in trans_msg() callback Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 646/731] s390/ctcm: Fix return type of ctc{mp,}m_tx() Greg Kroah-Hartman
` (96 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sami Tolvanen, Kees Cook,
Nathan Chancellor, Alex Deucher, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit e4d0ef752081e7aa6ffb7ccac11c499c732a2e05 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:3008:29: error: incompatible function pointer types initializing 'int (*)(void *, uint32_t, long *, uint32_t)' (aka 'int (*)(void *, unsigned int, long *, unsigned int)') with an expression of type 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, uint32_t)' (aka 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
.odn_edit_dpm_table = smu_od_edit_dpm_table,
^~~~~~~~~~~~~~~~~~~~~
1 error generated.
There are only two implementations of ->odn_edit_dpm_table() in 'struct
amd_pm_funcs': smu_od_edit_dpm_table() and pp_odn_edit_dpm_table(). One
has a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND' and the
other uses 'u32'. Ultimately, smu_od_edit_dpm_table() calls
->od_edit_dpm_table() from 'struct pptable_funcs' and
pp_odn_edit_dpm_table() calls ->odn_edit_dpm_table() from 'struct
pp_hwmgr_func', which both have a second parameter type of 'enum
PP_OD_DPM_TABLE_COMMAND'.
Update the type parameter in both the prototype in 'struct amd_pm_funcs'
and pp_odn_edit_dpm_table() to 'enum PP_OD_DPM_TABLE_COMMAND', which
cleans up the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/include/kgd_pp_interface.h | 3 ++-
drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/include/kgd_pp_interface.h b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
index bac15c466733..6e27c8b16391 100644
--- a/drivers/gpu/drm/amd/include/kgd_pp_interface.h
+++ b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
@@ -341,7 +341,8 @@ struct amd_pm_funcs {
int (*get_power_profile_mode)(void *handle, char *buf);
int (*set_power_profile_mode)(void *handle, long *input, uint32_t size);
int (*set_fine_grain_clk_vol)(void *handle, uint32_t type, long *input, uint32_t size);
- int (*odn_edit_dpm_table)(void *handle, uint32_t type, long *input, uint32_t size);
+ int (*odn_edit_dpm_table)(void *handle, enum PP_OD_DPM_TABLE_COMMAND type,
+ long *input, uint32_t size);
int (*set_mp1_state)(void *handle, enum pp_mp1_state mp1_state);
int (*smu_i2c_bus_access)(void *handle, bool acquire);
int (*gfx_state_change_set)(void *handle, uint32_t state);
diff --git a/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
index 321215003643..0f5930e797bd 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
@@ -924,7 +924,8 @@ static int pp_set_fine_grain_clk_vol(void *handle, uint32_t type, long *input, u
return hwmgr->hwmgr_func->set_fine_grain_clk_vol(hwmgr, type, input, size);
}
-static int pp_odn_edit_dpm_table(void *handle, uint32_t type, long *input, uint32_t size)
+static int pp_odn_edit_dpm_table(void *handle, enum PP_OD_DPM_TABLE_COMMAND type,
+ long *input, uint32_t size)
{
struct pp_hwmgr *hwmgr = handle;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 646/731] s390/ctcm: Fix return type of ctc{mp,}m_tx()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (644 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 645/731] drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 647/731] s390/netiucv: Fix return type of netiucv_tx() Greg Kroah-Hartman
` (95 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexandra Winter, Kees Cook,
Nathan Chancellor, David S. Miller, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit aa5bf80c3c067b82b4362cd6e8e2194623bcaca6 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/s390/net/ctcm_main.c:1064:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = ctcm_tx,
^~~~~~~
drivers/s390/net/ctcm_main.c:1072:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = ctcmpc_tx,
^~~~~~~~~
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of ctc{mp,}m_tx() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.
Additionally, while in the area, remove a comment block that is no
longer relevant.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/s390/net/ctcm_main.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index fd705429708e..f91b6cfd7ed0 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -825,16 +825,9 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
/**
* Start transmission of a packet.
* Called from generic network device layer.
- *
- * skb Pointer to buffer containing the packet.
- * dev Pointer to interface struct.
- *
- * returns 0 if packet consumed, !0 if packet rejected.
- * Note: If we return !0, then the packet is free'd by
- * the generic network layer.
*/
/* first merge version - leaving both functions separated */
-static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ctcm_tx(struct sk_buff *skb, struct net_device *dev)
{
struct ctcm_priv *priv = dev->ml_priv;
@@ -877,7 +870,7 @@ static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
}
/* unmerged MPC variant of ctcm_tx */
-static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
{
int len = 0;
struct ctcm_priv *priv = dev->ml_priv;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 647/731] s390/netiucv: Fix return type of netiucv_tx()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (645 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 646/731] s390/ctcm: Fix return type of ctc{mp,}m_tx() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 648/731] s390/lcs: Fix return type of lcs_start_xmit() Greg Kroah-Hartman
` (94 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexandra Winter, Kees Cook,
Nathan Chancellor, David S. Miller, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 88d86d18d7cf7e9137c95f9d212bb9fff8a1b4be ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = netiucv_tx,
^~~~~~~~~~
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of netiucv_tx() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.
Additionally, while in the area, remove a comment block that is no
longer relevant.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/s390/net/netiucv.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index 5a0c2f07a3a2..ce5f0ffd6cc8 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1252,15 +1252,8 @@ static int netiucv_close(struct net_device *dev)
/**
* Start transmission of a packet.
* Called from generic network device layer.
- *
- * @param skb Pointer to buffer containing the packet.
- * @param dev Pointer to interface struct.
- *
- * @return 0 if packet consumed, !0 if packet rejected.
- * Note: If we return !0, then the packet is free'd by
- * the generic network layer.
*/
-static int netiucv_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t netiucv_tx(struct sk_buff *skb, struct net_device *dev)
{
struct netiucv_priv *privptr = netdev_priv(dev);
int rc;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 648/731] s390/lcs: Fix return type of lcs_start_xmit()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (646 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 647/731] s390/netiucv: Fix return type of netiucv_tx() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 649/731] drm/msm: Use drm_mode_copy() Greg Kroah-Hartman
` (93 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexandra Winter, Kees Cook,
Nathan Chancellor, David S. Miller, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit bb16db8393658e0978c3f0d30ae069e878264fa3 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/s390/net/lcs.c:2090:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = lcs_start_xmit,
^~~~~~~~~~~~~~
drivers/s390/net/lcs.c:2097:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = lcs_start_xmit,
^~~~~~~~~~~~~~
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of lcs_start_xmit() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/s390/net/lcs.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 06a322bdced6..7e743f4717a9 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1518,9 +1518,8 @@ lcs_txbuffer_cb(struct lcs_channel *channel, struct lcs_buffer *buffer)
/**
* Packet transmit function called by network stack
*/
-static int
-__lcs_start_xmit(struct lcs_card *card, struct sk_buff *skb,
- struct net_device *dev)
+static netdev_tx_t __lcs_start_xmit(struct lcs_card *card, struct sk_buff *skb,
+ struct net_device *dev)
{
struct lcs_header *header;
int rc = NETDEV_TX_OK;
@@ -1581,8 +1580,7 @@ __lcs_start_xmit(struct lcs_card *card, struct sk_buff *skb,
return rc;
}
-static int
-lcs_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lcs_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct lcs_card *card;
int rc;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 649/731] drm/msm: Use drm_mode_copy()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (647 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 648/731] s390/lcs: Fix return type of lcs_start_xmit() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` Greg Kroah-Hartman
` (92 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rob Clark, Sean Paul, Abhinav Kumar,
linux-arm-msm, freedreno, Dmitry Baryshkov, Daniel Vetter,
Ville Syrjälä,
Sasha Levin
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit b2a1c5ca50db22b3677676dd5bad5f6092429acf ]
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-5-ville.syrjala@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/dp/dp_display.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index d13fd39f05de..15e38ad7aefb 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -840,7 +840,7 @@ static int dp_display_set_mode(struct msm_dp *dp_display,
dp = container_of(dp_display, struct dp_display_private, dp_display);
- dp->panel->dp_mode.drm_mode = mode->drm_mode;
+ drm_mode_copy(&dp->panel->dp_mode.drm_mode, &mode->drm_mode);
dp->panel->dp_mode.bpp = mode->bpp;
dp->panel->dp_mode.capabilities = mode->capabilities;
dp_panel_init_panel_info(dp->panel);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 650/731] drm/rockchip: Use drm_mode_copy()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 001/731] drm/amd/display: Manually adjust strobe for DCN303 Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 003/731] arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins Greg Kroah-Hartman
` (739 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ville Syrjälä,
Sandy Huang, Heiko Stübner, linux-arm-kernel,
linux-rockchip, Daniel Vetter, Sasha Levin
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit 2bfaa28000d2830d3209161a4541cce0660e1b84 ]
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/rockchip/cdn-dp-core.c | 2 +-
drivers/gpu/drm/rockchip/inno_hdmi.c | 2 +-
drivers/gpu/drm/rockchip/rk3066_hdmi.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 6b5d0722afa6..20e63cadec8c 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -565,7 +565,7 @@ static void cdn_dp_encoder_mode_set(struct drm_encoder *encoder,
video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
- memcpy(&dp->mode, adjusted, sizeof(*mode));
+ drm_mode_copy(&dp->mode, adjusted);
}
static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)
diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 7afdc54eb3ec..78120da5e63a 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -488,7 +488,7 @@ static void inno_hdmi_encoder_mode_set(struct drm_encoder *encoder,
inno_hdmi_setup(hdmi, adj_mode);
/* Store the display mode for plugin/DPMS poweron events */
- memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+ drm_mode_copy(&hdmi->previous_mode, adj_mode);
}
static void inno_hdmi_encoder_enable(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
index 1c546c3a8998..17e7c40a9e7b 100644
--- a/drivers/gpu/drm/rockchip/rk3066_hdmi.c
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -383,7 +383,7 @@ rk3066_hdmi_encoder_mode_set(struct drm_encoder *encoder,
struct rk3066_hdmi *hdmi = to_rk3066_hdmi(encoder);
/* Store the display mode for plugin/DPMS poweron events. */
- memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+ drm_mode_copy(&hdmi->previous_mode, adj_mode);
}
static void rk3066_hdmi_encoder_enable(struct drm_encoder *encoder)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 650/731] drm/rockchip: Use drm_mode_copy()
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
0 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ville Syrjälä,
Sandy Huang, Heiko Stübner, linux-arm-kernel,
linux-rockchip, Daniel Vetter, Sasha Levin
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit 2bfaa28000d2830d3209161a4541cce0660e1b84 ]
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/rockchip/cdn-dp-core.c | 2 +-
drivers/gpu/drm/rockchip/inno_hdmi.c | 2 +-
drivers/gpu/drm/rockchip/rk3066_hdmi.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 6b5d0722afa6..20e63cadec8c 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -565,7 +565,7 @@ static void cdn_dp_encoder_mode_set(struct drm_encoder *encoder,
video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
- memcpy(&dp->mode, adjusted, sizeof(*mode));
+ drm_mode_copy(&dp->mode, adjusted);
}
static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)
diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 7afdc54eb3ec..78120da5e63a 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -488,7 +488,7 @@ static void inno_hdmi_encoder_mode_set(struct drm_encoder *encoder,
inno_hdmi_setup(hdmi, adj_mode);
/* Store the display mode for plugin/DPMS poweron events */
- memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+ drm_mode_copy(&hdmi->previous_mode, adj_mode);
}
static void inno_hdmi_encoder_enable(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
index 1c546c3a8998..17e7c40a9e7b 100644
--- a/drivers/gpu/drm/rockchip/rk3066_hdmi.c
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -383,7 +383,7 @@ rk3066_hdmi_encoder_mode_set(struct drm_encoder *encoder,
struct rk3066_hdmi *hdmi = to_rk3066_hdmi(encoder);
/* Store the display mode for plugin/DPMS poweron events. */
- memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+ drm_mode_copy(&hdmi->previous_mode, adj_mode);
}
static void rk3066_hdmi_encoder_enable(struct drm_encoder *encoder)
--
2.35.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 650/731] drm/rockchip: Use drm_mode_copy()
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
0 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ville Syrjälä,
Sandy Huang, Heiko Stübner, linux-arm-kernel,
linux-rockchip, Daniel Vetter, Sasha Levin
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit 2bfaa28000d2830d3209161a4541cce0660e1b84 ]
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/rockchip/cdn-dp-core.c | 2 +-
drivers/gpu/drm/rockchip/inno_hdmi.c | 2 +-
drivers/gpu/drm/rockchip/rk3066_hdmi.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 6b5d0722afa6..20e63cadec8c 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -565,7 +565,7 @@ static void cdn_dp_encoder_mode_set(struct drm_encoder *encoder,
video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
- memcpy(&dp->mode, adjusted, sizeof(*mode));
+ drm_mode_copy(&dp->mode, adjusted);
}
static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)
diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 7afdc54eb3ec..78120da5e63a 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -488,7 +488,7 @@ static void inno_hdmi_encoder_mode_set(struct drm_encoder *encoder,
inno_hdmi_setup(hdmi, adj_mode);
/* Store the display mode for plugin/DPMS poweron events */
- memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+ drm_mode_copy(&hdmi->previous_mode, adj_mode);
}
static void inno_hdmi_encoder_enable(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
index 1c546c3a8998..17e7c40a9e7b 100644
--- a/drivers/gpu/drm/rockchip/rk3066_hdmi.c
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -383,7 +383,7 @@ rk3066_hdmi_encoder_mode_set(struct drm_encoder *encoder,
struct rk3066_hdmi *hdmi = to_rk3066_hdmi(encoder);
/* Store the display mode for plugin/DPMS poweron events. */
- memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+ drm_mode_copy(&hdmi->previous_mode, adj_mode);
}
static void rk3066_hdmi_encoder_enable(struct drm_encoder *encoder)
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 651/731] drm/sti: Use drm_mode_copy()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (649 preceding siblings ...)
2022-12-28 14:42 ` Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 652/731] drm/mediatek: Fix return type of mtk_hdmi_bridge_mode_valid() Greg Kroah-Hartman
` (90 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alain Volmat,
Ville Syrjälä,
Daniel Vetter, Sasha Levin
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit 442cf8e22ba25a77cb9092d78733fdbac9844e50 ]
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Cc: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-8-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/sti/sti_dvo.c | 2 +-
drivers/gpu/drm/sti/sti_hda.c | 2 +-
drivers/gpu/drm/sti/sti_hdmi.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/sti/sti_dvo.c b/drivers/gpu/drm/sti/sti_dvo.c
index b6ee8a82e656..f3a5616b7daf 100644
--- a/drivers/gpu/drm/sti/sti_dvo.c
+++ b/drivers/gpu/drm/sti/sti_dvo.c
@@ -288,7 +288,7 @@ static void sti_dvo_set_mode(struct drm_bridge *bridge,
DRM_DEBUG_DRIVER("\n");
- memcpy(&dvo->mode, mode, sizeof(struct drm_display_mode));
+ drm_mode_copy(&dvo->mode, mode);
/* According to the path used (main or aux), the dvo clocks should
* have a different parent clock. */
diff --git a/drivers/gpu/drm/sti/sti_hda.c b/drivers/gpu/drm/sti/sti_hda.c
index 03f3377f918c..c9e6db15ab66 100644
--- a/drivers/gpu/drm/sti/sti_hda.c
+++ b/drivers/gpu/drm/sti/sti_hda.c
@@ -523,7 +523,7 @@ static void sti_hda_set_mode(struct drm_bridge *bridge,
DRM_DEBUG_DRIVER("\n");
- memcpy(&hda->mode, mode, sizeof(struct drm_display_mode));
+ drm_mode_copy(&hda->mode, mode);
if (!hda_get_mode_idx(hda->mode, &mode_idx)) {
DRM_ERROR("Undefined mode\n");
diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
index f3ace11209dd..bb2a2868de2d 100644
--- a/drivers/gpu/drm/sti/sti_hdmi.c
+++ b/drivers/gpu/drm/sti/sti_hdmi.c
@@ -940,7 +940,7 @@ static void sti_hdmi_set_mode(struct drm_bridge *bridge,
DRM_DEBUG_DRIVER("\n");
/* Copy the drm display mode in the connector local structure */
- memcpy(&hdmi->mode, mode, sizeof(struct drm_display_mode));
+ drm_mode_copy(&hdmi->mode, mode);
/* Update clock framerate according to the selected mode */
ret = clk_set_rate(hdmi->clk_pix, mode->clock * 1000);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 652/731] drm/mediatek: Fix return type of mtk_hdmi_bridge_mode_valid()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (650 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 651/731] drm/sti: " Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 653/731] drivers/md/md-bitmap: check the return value of md_bitmap_get_counter() Greg Kroah-Hartman
` (89 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sami Tolvanen, Nathan Chancellor,
Kees Cook, AngeloGioacchino Del Regno, Chun-Kuang Hu,
Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 890d637523eec9d730e3885532fa1228ba678880 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/mediatek/mtk_hdmi.c:1407:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_bridge *, const struct drm_display_info *, const struct drm_display_mode *)' with an expression of type 'int (struct drm_bridge *, const struct drm_display_info *, const struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = mtk_hdmi_bridge_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
->mode_valid() in 'struct drm_bridge_funcs' expects a return type of
'enum drm_mode_status', not 'int'. Adjust the return type of
mtk_hdmi_bridge_mode_valid() to match the prototype's to resolve the
warning and CFI failure.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/mediatek/mtk_hdmi.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 3196189429bc..7613b0fa2be6 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -1203,9 +1203,10 @@ static enum drm_connector_status mtk_hdmi_detect(struct mtk_hdmi *hdmi)
return mtk_hdmi_update_plugged_status(hdmi);
}
-static int mtk_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
- const struct drm_display_info *info,
- const struct drm_display_mode *mode)
+static enum drm_mode_status
+mtk_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
+ const struct drm_display_info *info,
+ const struct drm_display_mode *mode)
{
struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
struct drm_bridge *next_bridge;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 653/731] drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (651 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 652/731] drm/mediatek: Fix return type of mtk_hdmi_bridge_mode_valid() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 654/731] md/raid1: stop mdx_raid1 thread when raid1 array run failed Greg Kroah-Hartman
` (88 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Li Zhong, Song Liu, Sasha Levin
From: Li Zhong <floridsleeves@gmail.com>
[ Upstream commit 3bd548e5b819b8c0f2c9085de775c5c7bff9052f ]
Check the return value of md_bitmap_get_counter() in case it returns
NULL pointer, which will result in a null pointer dereference.
v2: update the check to include other dereference
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/md-bitmap.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/md/md-bitmap.c b/drivers/md/md-bitmap.c
index 8cc11b1987ec..650bfccd066f 100644
--- a/drivers/md/md-bitmap.c
+++ b/drivers/md/md-bitmap.c
@@ -2196,20 +2196,23 @@ int md_bitmap_resize(struct bitmap *bitmap, sector_t blocks,
if (set) {
bmc_new = md_bitmap_get_counter(&bitmap->counts, block, &new_blocks, 1);
- if (*bmc_new == 0) {
- /* need to set on-disk bits too. */
- sector_t end = block + new_blocks;
- sector_t start = block >> chunkshift;
- start <<= chunkshift;
- while (start < end) {
- md_bitmap_file_set_bit(bitmap, block);
- start += 1 << chunkshift;
+ if (bmc_new) {
+ if (*bmc_new == 0) {
+ /* need to set on-disk bits too. */
+ sector_t end = block + new_blocks;
+ sector_t start = block >> chunkshift;
+
+ start <<= chunkshift;
+ while (start < end) {
+ md_bitmap_file_set_bit(bitmap, block);
+ start += 1 << chunkshift;
+ }
+ *bmc_new = 2;
+ md_bitmap_count_page(&bitmap->counts, block, 1);
+ md_bitmap_set_pending(&bitmap->counts, block);
}
- *bmc_new = 2;
- md_bitmap_count_page(&bitmap->counts, block, 1);
- md_bitmap_set_pending(&bitmap->counts, block);
+ *bmc_new |= NEEDED_MASK;
}
- *bmc_new |= NEEDED_MASK;
if (new_blocks < old_blocks)
old_blocks = new_blocks;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 654/731] md/raid1: stop mdx_raid1 thread when raid1 array run failed
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (652 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 653/731] drivers/md/md-bitmap: check the return value of md_bitmap_get_counter() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 655/731] drm/amd/display: fix array index out of bound error in bios parser Greg Kroah-Hartman
` (87 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jiang Li, Song Liu, Sasha Levin
From: Jiang Li <jiang.li@ugreen.com>
[ Upstream commit b611ad14006e5be2170d9e8e611bf49dff288911 ]
fail run raid1 array when we assemble array with the inactive disk only,
but the mdx_raid1 thread were not stop, Even if the associated resources
have been released. it will caused a NULL dereference when we do poweroff.
This causes the following Oops:
[ 287.587787] BUG: kernel NULL pointer dereference, address: 0000000000000070
[ 287.594762] #PF: supervisor read access in kernel mode
[ 287.599912] #PF: error_code(0x0000) - not-present page
[ 287.605061] PGD 0 P4D 0
[ 287.607612] Oops: 0000 [#1] SMP NOPTI
[ 287.611287] CPU: 3 PID: 5265 Comm: md0_raid1 Tainted: G U 5.10.146 #0
[ 287.619029] Hardware name: xxxxxxx/To be filled by O.E.M, BIOS 5.19 06/16/2022
[ 287.626775] RIP: 0010:md_check_recovery+0x57/0x500 [md_mod]
[ 287.632357] Code: fe 01 00 00 48 83 bb 10 03 00 00 00 74 08 48 89 ......
[ 287.651118] RSP: 0018:ffffc90000433d78 EFLAGS: 00010202
[ 287.656347] RAX: 0000000000000000 RBX: ffff888105986800 RCX: 0000000000000000
[ 287.663491] RDX: ffffc90000433bb0 RSI: 00000000ffffefff RDI: ffff888105986800
[ 287.670634] RBP: ffffc90000433da0 R08: 0000000000000000 R09: c0000000ffffefff
[ 287.677771] R10: 0000000000000001 R11: ffffc90000433ba8 R12: ffff888105986800
[ 287.684907] R13: 0000000000000000 R14: fffffffffffffe00 R15: ffff888100b6b500
[ 287.692052] FS: 0000000000000000(0000) GS:ffff888277f80000(0000) knlGS:0000000000000000
[ 287.700149] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 287.705897] CR2: 0000000000000070 CR3: 000000000320a000 CR4: 0000000000350ee0
[ 287.713033] Call Trace:
[ 287.715498] raid1d+0x6c/0xbbb [raid1]
[ 287.719256] ? __schedule+0x1ff/0x760
[ 287.722930] ? schedule+0x3b/0xb0
[ 287.726260] ? schedule_timeout+0x1ed/0x290
[ 287.730456] ? __switch_to+0x11f/0x400
[ 287.734219] md_thread+0xe9/0x140 [md_mod]
[ 287.738328] ? md_thread+0xe9/0x140 [md_mod]
[ 287.742601] ? wait_woken+0x80/0x80
[ 287.746097] ? md_register_thread+0xe0/0xe0 [md_mod]
[ 287.751064] kthread+0x11a/0x140
[ 287.754300] ? kthread_park+0x90/0x90
[ 287.757974] ret_from_fork+0x1f/0x30
In fact, when raid1 array run fail, we need to do
md_unregister_thread() before raid1_free().
Signed-off-by: Jiang Li <jiang.li@ugreen.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/raid1.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 9fa479493642..783763f6845f 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -3141,6 +3141,7 @@ static int raid1_run(struct mddev *mddev)
* RAID1 needs at least one disk in active
*/
if (conf->raid_disks - mddev->degraded < 1) {
+ md_unregister_thread(&conf->thread);
ret = -EINVAL;
goto abort;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 655/731] drm/amd/display: fix array index out of bound error in bios parser
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (653 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 654/731] md/raid1: stop mdx_raid1 thread when raid1 array run failed Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 656/731] net: add atomic_long_t to net_device_stats fields Greg Kroah-Hartman
` (86 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Martin Leung, Tom Chung,
Aurabindo Pillai, Daniel Wheeler, Alex Deucher, Sasha Levin
From: Aurabindo Pillai <aurabindo.pillai@amd.com>
[ Upstream commit 4fc1ba4aa589ca267468ad23fedef37562227d32 ]
[Why&How]
Firmware headers dictate that gpio_pin array only has a size of 8. The
count returned from vbios however is greater than 8.
Fix this by not using array indexing but incrementing the pointer since
gpio_pin definition in atomfirmware.h is hardcoded to size 8
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../gpu/drm/amd/display/dc/bios/bios_parser2.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
index 6dbde74c1e06..1d86fd5610c0 100644
--- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
+++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
@@ -352,6 +352,7 @@ static enum bp_result get_gpio_i2c_info(
uint32_t count = 0;
unsigned int table_index = 0;
bool find_valid = false;
+ struct atom_gpio_pin_assignment *pin;
if (!info)
return BP_RESULT_BADINPUT;
@@ -379,20 +380,17 @@ static enum bp_result get_gpio_i2c_info(
- sizeof(struct atom_common_table_header))
/ sizeof(struct atom_gpio_pin_assignment);
+ pin = (struct atom_gpio_pin_assignment *) header->gpio_pin;
+
for (table_index = 0; table_index < count; table_index++) {
- if (((record->i2c_id & I2C_HW_CAP) == (
- header->gpio_pin[table_index].gpio_id &
- I2C_HW_CAP)) &&
- ((record->i2c_id & I2C_HW_ENGINE_ID_MASK) ==
- (header->gpio_pin[table_index].gpio_id &
- I2C_HW_ENGINE_ID_MASK)) &&
- ((record->i2c_id & I2C_HW_LANE_MUX) ==
- (header->gpio_pin[table_index].gpio_id &
- I2C_HW_LANE_MUX))) {
+ if (((record->i2c_id & I2C_HW_CAP) == (pin->gpio_id & I2C_HW_CAP)) &&
+ ((record->i2c_id & I2C_HW_ENGINE_ID_MASK) == (pin->gpio_id & I2C_HW_ENGINE_ID_MASK)) &&
+ ((record->i2c_id & I2C_HW_LANE_MUX) == (pin->gpio_id & I2C_HW_LANE_MUX))) {
/* still valid */
find_valid = true;
break;
}
+ pin = (struct atom_gpio_pin_assignment *)((uint8_t *)pin + sizeof(struct atom_gpio_pin_assignment));
}
/* If we don't find the entry that we are looking for then
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 656/731] net: add atomic_long_t to net_device_stats fields
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (654 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 655/731] drm/amd/display: fix array index out of bound error in bios parser Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 657/731] ipv6/sit: use DEV_STATS_INC() to avoid data-races Greg Kroah-Hartman
` (85 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eric Dumazet, David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 6c1c5097781f563b70a81683ea6fdac21637573b ]
Long standing KCSAN issues are caused by data-race around
some dev->stats changes.
Most performance critical paths already use per-cpu
variables, or per-queue ones.
It is reasonable (and more correct) to use atomic operations
for the slow paths.
This patch adds an union for each field of net_device_stats,
so that we can convert paths that are not yet protected
by a spinlock or a mutex.
netdev_stats_to_stats64() no longer has an #if BITS_PER_LONG==64
Note that the memcpy() we were using on 64bit arches
had no provision to avoid load-tearing,
while atomic_long_read() is providing the needed protection
at no cost.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/netdevice.h | 58 +++++++++++++++++++++++----------------
include/net/dst.h | 5 ++--
net/core/dev.c | 14 ++--------
3 files changed, 40 insertions(+), 37 deletions(-)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 3b97438afe3e..3a75d644a120 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -167,31 +167,38 @@ static inline bool dev_xmit_complete(int rc)
* (unsigned long) so they can be read and written atomically.
*/
+#define NET_DEV_STAT(FIELD) \
+ union { \
+ unsigned long FIELD; \
+ atomic_long_t __##FIELD; \
+ }
+
struct net_device_stats {
- unsigned long rx_packets;
- unsigned long tx_packets;
- unsigned long rx_bytes;
- unsigned long tx_bytes;
- unsigned long rx_errors;
- unsigned long tx_errors;
- unsigned long rx_dropped;
- unsigned long tx_dropped;
- unsigned long multicast;
- unsigned long collisions;
- unsigned long rx_length_errors;
- unsigned long rx_over_errors;
- unsigned long rx_crc_errors;
- unsigned long rx_frame_errors;
- unsigned long rx_fifo_errors;
- unsigned long rx_missed_errors;
- unsigned long tx_aborted_errors;
- unsigned long tx_carrier_errors;
- unsigned long tx_fifo_errors;
- unsigned long tx_heartbeat_errors;
- unsigned long tx_window_errors;
- unsigned long rx_compressed;
- unsigned long tx_compressed;
+ NET_DEV_STAT(rx_packets);
+ NET_DEV_STAT(tx_packets);
+ NET_DEV_STAT(rx_bytes);
+ NET_DEV_STAT(tx_bytes);
+ NET_DEV_STAT(rx_errors);
+ NET_DEV_STAT(tx_errors);
+ NET_DEV_STAT(rx_dropped);
+ NET_DEV_STAT(tx_dropped);
+ NET_DEV_STAT(multicast);
+ NET_DEV_STAT(collisions);
+ NET_DEV_STAT(rx_length_errors);
+ NET_DEV_STAT(rx_over_errors);
+ NET_DEV_STAT(rx_crc_errors);
+ NET_DEV_STAT(rx_frame_errors);
+ NET_DEV_STAT(rx_fifo_errors);
+ NET_DEV_STAT(rx_missed_errors);
+ NET_DEV_STAT(tx_aborted_errors);
+ NET_DEV_STAT(tx_carrier_errors);
+ NET_DEV_STAT(tx_fifo_errors);
+ NET_DEV_STAT(tx_heartbeat_errors);
+ NET_DEV_STAT(tx_window_errors);
+ NET_DEV_STAT(rx_compressed);
+ NET_DEV_STAT(tx_compressed);
};
+#undef NET_DEV_STAT
#include <linux/cache.h>
@@ -5477,4 +5484,9 @@ extern struct list_head ptype_base[PTYPE_HASH_SIZE] __read_mostly;
extern struct net_device *blackhole_netdev;
+/* Note: Avoid these macros in fast path, prefer per-cpu or per-queue counters. */
+#define DEV_STATS_INC(DEV, FIELD) atomic_long_inc(&(DEV)->stats.__##FIELD)
+#define DEV_STATS_ADD(DEV, FIELD, VAL) \
+ atomic_long_add((VAL), &(DEV)->stats.__##FIELD)
+
#endif /* _LINUX_NETDEVICE_H */
diff --git a/include/net/dst.h b/include/net/dst.h
index a057319aabef..17697ec79949 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -361,9 +361,8 @@ static inline void __skb_tunnel_rx(struct sk_buff *skb, struct net_device *dev,
static inline void skb_tunnel_rx(struct sk_buff *skb, struct net_device *dev,
struct net *net)
{
- /* TODO : stats should be SMP safe */
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += skb->len;
+ DEV_STATS_INC(dev, rx_packets);
+ DEV_STATS_ADD(dev, rx_bytes, skb->len);
__skb_tunnel_rx(skb, dev, net);
}
diff --git a/net/core/dev.c b/net/core/dev.c
index be51644e95da..33d6b691e15e 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -10640,24 +10640,16 @@ void netdev_run_todo(void)
void netdev_stats_to_stats64(struct rtnl_link_stats64 *stats64,
const struct net_device_stats *netdev_stats)
{
-#if BITS_PER_LONG == 64
- BUILD_BUG_ON(sizeof(*stats64) < sizeof(*netdev_stats));
- memcpy(stats64, netdev_stats, sizeof(*netdev_stats));
- /* zero out counters that only exist in rtnl_link_stats64 */
- memset((char *)stats64 + sizeof(*netdev_stats), 0,
- sizeof(*stats64) - sizeof(*netdev_stats));
-#else
- size_t i, n = sizeof(*netdev_stats) / sizeof(unsigned long);
- const unsigned long *src = (const unsigned long *)netdev_stats;
+ size_t i, n = sizeof(*netdev_stats) / sizeof(atomic_long_t);
+ const atomic_long_t *src = (atomic_long_t *)netdev_stats;
u64 *dst = (u64 *)stats64;
BUILD_BUG_ON(n > sizeof(*stats64) / sizeof(u64));
for (i = 0; i < n; i++)
- dst[i] = src[i];
+ dst[i] = atomic_long_read(&src[i]);
/* zero out counters that only exist in rtnl_link_stats64 */
memset((char *)stats64 + n * sizeof(u64), 0,
sizeof(*stats64) - n * sizeof(u64));
-#endif
}
EXPORT_SYMBOL(netdev_stats_to_stats64);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 657/731] ipv6/sit: use DEV_STATS_INC() to avoid data-races
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (655 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 656/731] net: add atomic_long_t to net_device_stats fields Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 658/731] mrp: introduce active flags to prevent UAF when applicant uninit Greg Kroah-Hartman
` (84 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot, Eric Dumazet,
David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit cb34b7cf17ecf33499c9298943f85af247abc1e9 ]
syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error
concurrently.
This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit()
is not protected by a spinlock.
While original KCSAN report was about tx path, rx path has the same issue.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/sit.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 946871741f12..d4cdc2b1b468 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -696,7 +696,7 @@ static int ipip6_rcv(struct sk_buff *skb)
skb->dev = tunnel->dev;
if (packet_is_spoofed(skb, iph, tunnel)) {
- tunnel->dev->stats.rx_errors++;
+ DEV_STATS_INC(tunnel->dev, rx_errors);
goto out;
}
@@ -716,8 +716,8 @@ static int ipip6_rcv(struct sk_buff *skb)
net_info_ratelimited("non-ECT from %pI4 with TOS=%#x\n",
&iph->saddr, iph->tos);
if (err > 1) {
- ++tunnel->dev->stats.rx_frame_errors;
- ++tunnel->dev->stats.rx_errors;
+ DEV_STATS_INC(tunnel->dev, rx_frame_errors);
+ DEV_STATS_INC(tunnel->dev, rx_errors);
goto out;
}
}
@@ -948,7 +948,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
if (!rt) {
rt = ip_route_output_flow(tunnel->net, &fl4, NULL);
if (IS_ERR(rt)) {
- dev->stats.tx_carrier_errors++;
+ DEV_STATS_INC(dev, tx_carrier_errors);
goto tx_error_icmp;
}
dst_cache_set_ip4(&tunnel->dst_cache, &rt->dst, fl4.saddr);
@@ -956,14 +956,14 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
if (rt->rt_type != RTN_UNICAST) {
ip_rt_put(rt);
- dev->stats.tx_carrier_errors++;
+ DEV_STATS_INC(dev, tx_carrier_errors);
goto tx_error_icmp;
}
tdev = rt->dst.dev;
if (tdev == dev) {
ip_rt_put(rt);
- dev->stats.collisions++;
+ DEV_STATS_INC(dev, collisions);
goto tx_error;
}
@@ -976,7 +976,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
mtu = dst_mtu(&rt->dst) - t_hlen;
if (mtu < IPV4_MIN_MTU) {
- dev->stats.collisions++;
+ DEV_STATS_INC(dev, collisions);
ip_rt_put(rt);
goto tx_error;
}
@@ -1015,7 +1015,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
if (!new_skb) {
ip_rt_put(rt);
- dev->stats.tx_dropped++;
+ DEV_STATS_INC(dev, tx_dropped);
kfree_skb(skb);
return NETDEV_TX_OK;
}
@@ -1045,7 +1045,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
dst_link_failure(skb);
tx_error:
kfree_skb(skb);
- dev->stats.tx_errors++;
+ DEV_STATS_INC(dev, tx_errors);
return NETDEV_TX_OK;
}
@@ -1064,7 +1064,7 @@ static netdev_tx_t sit_tunnel_xmit__(struct sk_buff *skb,
return NETDEV_TX_OK;
tx_error:
kfree_skb(skb);
- dev->stats.tx_errors++;
+ DEV_STATS_INC(dev, tx_errors);
return NETDEV_TX_OK;
}
@@ -1093,7 +1093,7 @@ static netdev_tx_t sit_tunnel_xmit(struct sk_buff *skb,
return NETDEV_TX_OK;
tx_err:
- dev->stats.tx_errors++;
+ DEV_STATS_INC(dev, tx_errors);
kfree_skb(skb);
return NETDEV_TX_OK;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 658/731] mrp: introduce active flags to prevent UAF when applicant uninit
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (656 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 657/731] ipv6/sit: use DEV_STATS_INC() to avoid data-races Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 659/731] ppp: associate skb with a device at tx Greg Kroah-Hartman
` (83 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+6fd64001c20aa99e34a4,
Schspa Shi, David S. Miller, Sasha Levin
From: Schspa Shi <schspa@gmail.com>
[ Upstream commit ab0377803dafc58f1e22296708c1c28e309414d6 ]
The caller of del_timer_sync must prevent restarting of the timer, If
we have no this synchronization, there is a small probability that the
cancellation will not be successful.
And syzbot report the fellowing crash:
==================================================================
BUG: KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline]
BUG: KASAN: use-after-free in enqueue_timer+0x18/0xa4 kernel/time/timer.c:605
Write at addr f9ff000024df6058 by task syz-fuzzer/2256
Pointer tag: [f9], memory tag: [fe]
CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted 6.1.0-rc5-syzkaller-00008-
ge01d50cbd6ee #0
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156
dump_backtrace arch/arm64/kernel/stacktrace.c:162 [inline]
show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x1a8/0x4a0 mm/kasan/report.c:395
kasan_report+0x94/0xb4 mm/kasan/report.c:495
__do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320
do_bad_area arch/arm64/mm/fault.c:473 [inline]
do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749
do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825
el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367
el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427
el1h_64_sync+0x64/0x68 arch/arm64/kernel/entry.S:576
hlist_add_head include/linux/list.h:929 [inline]
enqueue_timer+0x18/0xa4 kernel/time/timer.c:605
mod_timer+0x14/0x20 kernel/time/timer.c:1161
mrp_periodic_timer_arm net/802/mrp.c:614 [inline]
mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627
call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474
expire_timers+0x98/0xc4 kernel/time/timer.c:1519
To fix it, we can introduce a new active flags to make sure the timer will
not restart.
Reported-by: syzbot+6fd64001c20aa99e34a4@syzkaller.appspotmail.com
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/mrp.h | 1 +
net/802/mrp.c | 18 +++++++++++++-----
2 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/include/net/mrp.h b/include/net/mrp.h
index 1c308c034e1a..a8102661fd61 100644
--- a/include/net/mrp.h
+++ b/include/net/mrp.h
@@ -120,6 +120,7 @@ struct mrp_applicant {
struct sk_buff *pdu;
struct rb_root mad;
struct rcu_head rcu;
+ bool active;
};
struct mrp_port {
diff --git a/net/802/mrp.c b/net/802/mrp.c
index 35e04cc5390c..c10a432a5b43 100644
--- a/net/802/mrp.c
+++ b/net/802/mrp.c
@@ -606,7 +606,10 @@ static void mrp_join_timer(struct timer_list *t)
spin_unlock(&app->lock);
mrp_queue_xmit(app);
- mrp_join_timer_arm(app);
+ spin_lock(&app->lock);
+ if (likely(app->active))
+ mrp_join_timer_arm(app);
+ spin_unlock(&app->lock);
}
static void mrp_periodic_timer_arm(struct mrp_applicant *app)
@@ -620,11 +623,12 @@ static void mrp_periodic_timer(struct timer_list *t)
struct mrp_applicant *app = from_timer(app, t, periodic_timer);
spin_lock(&app->lock);
- mrp_mad_event(app, MRP_EVENT_PERIODIC);
- mrp_pdu_queue(app);
+ if (likely(app->active)) {
+ mrp_mad_event(app, MRP_EVENT_PERIODIC);
+ mrp_pdu_queue(app);
+ mrp_periodic_timer_arm(app);
+ }
spin_unlock(&app->lock);
-
- mrp_periodic_timer_arm(app);
}
static int mrp_pdu_parse_end_mark(struct sk_buff *skb, int *offset)
@@ -872,6 +876,7 @@ int mrp_init_applicant(struct net_device *dev, struct mrp_application *appl)
app->dev = dev;
app->app = appl;
app->mad = RB_ROOT;
+ app->active = true;
spin_lock_init(&app->lock);
skb_queue_head_init(&app->queue);
rcu_assign_pointer(dev->mrp_port->applicants[appl->type], app);
@@ -900,6 +905,9 @@ void mrp_uninit_applicant(struct net_device *dev, struct mrp_application *appl)
RCU_INIT_POINTER(port->applicants[appl->type], NULL);
+ spin_lock_bh(&app->lock);
+ app->active = false;
+ spin_unlock_bh(&app->lock);
/* Delete timer and generate a final TX event to flush out
* all pending messages before the applicant is gone.
*/
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 659/731] ppp: associate skb with a device at tx
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (657 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 658/731] mrp: introduce active flags to prevent UAF when applicant uninit Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 660/731] bpf: Prevent decl_tag from being referenced in func_proto arg Greg Kroah-Hartman
` (82 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paul Mackerras, linux-ppp,
syzbot+41cab52ab62ee99ed24a, Stanislav Fomichev, David S. Miller,
Sasha Levin
From: Stanislav Fomichev <sdf@google.com>
[ Upstream commit 9f225444467b98579cf28d94f4ad053460dfdb84 ]
Syzkaller triggered flow dissector warning with the following:
r0 = openat$ppp(0xffffffffffffff9c, &(0x7f0000000000), 0xc0802, 0x0)
ioctl$PPPIOCNEWUNIT(r0, 0xc004743e, &(0x7f00000000c0))
ioctl$PPPIOCSACTIVE(r0, 0x40107446, &(0x7f0000000240)={0x2, &(0x7f0000000180)=[{0x20, 0x0, 0x0, 0xfffff034}, {0x6}]})
pwritev(r0, &(0x7f0000000040)=[{&(0x7f0000000140)='\x00!', 0x2}], 0x1, 0x0, 0x0)
[ 9.485814] WARNING: CPU: 3 PID: 329 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0x1ee0/0x1fa0
[ 9.485929] skb_get_poff+0x53/0xa0
[ 9.485937] bpf_skb_get_pay_offset+0xe/0x20
[ 9.485944] ? ppp_send_frame+0xc2/0x5b0
[ 9.485949] ? _raw_spin_unlock_irqrestore+0x40/0x60
[ 9.485958] ? __ppp_xmit_process+0x7a/0xe0
[ 9.485968] ? ppp_xmit_process+0x5b/0xb0
[ 9.485974] ? ppp_write+0x12a/0x190
[ 9.485981] ? do_iter_write+0x18e/0x2d0
[ 9.485987] ? __import_iovec+0x30/0x130
[ 9.485997] ? do_pwritev+0x1b6/0x240
[ 9.486016] ? trace_hardirqs_on+0x47/0x50
[ 9.486023] ? __x64_sys_pwritev+0x24/0x30
[ 9.486026] ? do_syscall_64+0x3d/0x80
[ 9.486031] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
Flow dissector tries to find skb net namespace either via device
or via socket. Neigher is set in ppp_send_frame, so let's manually
use ppp->dev.
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-ppp@vger.kernel.org
Reported-by: syzbot+41cab52ab62ee99ed24a@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ppp/ppp_generic.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index 829d6ada1704..c1f11d1df4cd 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -1742,6 +1742,8 @@ ppp_send_frame(struct ppp *ppp, struct sk_buff *skb)
int len;
unsigned char *cp;
+ skb->dev = ppp->dev;
+
if (proto < 0x8000) {
#ifdef CONFIG_PPP_FILTER
/* check if we should pass this packet */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 660/731] bpf: Prevent decl_tag from being referenced in func_proto arg
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (658 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 659/731] ppp: associate skb with a device at tx Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 661/731] ethtool: avoiding integer overflow in ethtool_phys_id() Greg Kroah-Hartman
` (81 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+8dd0551dda6020944c5d,
Stanislav Fomichev, Daniel Borkmann, Yonghong Song, Sasha Levin
From: Stanislav Fomichev <sdf@google.com>
[ Upstream commit f17472d4599697d701aa239b4c475a506bccfd19 ]
Syzkaller managed to hit another decl_tag issue:
btf_func_proto_check kernel/bpf/btf.c:4506 [inline]
btf_check_all_types kernel/bpf/btf.c:4734 [inline]
btf_parse_type_sec+0x1175/0x1980 kernel/bpf/btf.c:4763
btf_parse kernel/bpf/btf.c:5042 [inline]
btf_new_fd+0x65a/0xb00 kernel/bpf/btf.c:6709
bpf_btf_load+0x6f/0x90 kernel/bpf/syscall.c:4342
__sys_bpf+0x50a/0x6c0 kernel/bpf/syscall.c:5034
__do_sys_bpf kernel/bpf/syscall.c:5093 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5091 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5091
do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48
This seems similar to commit ea68376c8bed ("bpf: prevent decl_tag from being
referenced in func_proto") but for the argument.
Reported-by: syzbot+8dd0551dda6020944c5d@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221123035422.872531-2-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/bpf/btf.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index 7cb13b9f69a6..0c2fa93bd8d2 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -3864,6 +3864,11 @@ static int btf_func_proto_check(struct btf_verifier_env *env,
break;
}
+ if (btf_type_is_resolve_source_only(arg_type)) {
+ btf_verifier_log_type(env, t, "Invalid arg#%u", i + 1);
+ return -EINVAL;
+ }
+
if (args[i].name_off &&
(!btf_name_offset_valid(btf, args[i].name_off) ||
!btf_name_valid_identifier(btf, args[i].name_off))) {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 661/731] ethtool: avoiding integer overflow in ethtool_phys_id()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (659 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 660/731] bpf: Prevent decl_tag from being referenced in func_proto arg Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 662/731] media: dvb-frontends: fix leak of memory fw Greg Kroah-Hartman
` (80 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Maxim Korotkov, Alexander Lobakin,
Andrew Lunn, Jakub Kicinski, Sasha Levin
From: Maxim Korotkov <korotkov.maxim.s@gmail.com>
[ Upstream commit 64a8f8f7127da228d59a39e2c5e75f86590f90b4 ]
The value of an arithmetic expression "n * id.data" is subject
to possible overflow due to a failure to cast operands to a larger data
type before performing arithmetic. Used macro for multiplication instead
operator for avoiding overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221122122901.22294-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ethtool/ioctl.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/ethtool/ioctl.c b/net/ethtool/ioctl.c
index e4983f473a3c..6991d77dcb2e 100644
--- a/net/ethtool/ioctl.c
+++ b/net/ethtool/ioctl.c
@@ -1988,7 +1988,8 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
} else {
/* Driver expects to be called at twice the frequency in rc */
int n = rc * 2, interval = HZ / n;
- u64 count = n * id.data, i = 0;
+ u64 count = mul_u32_u32(n, id.data);
+ u64 i = 0;
do {
rtnl_lock();
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 662/731] media: dvb-frontends: fix leak of memory fw
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (660 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 661/731] ethtool: avoiding integer overflow in ethtool_phys_id() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 663/731] media: dvbdev: adopts refcnt to avoid UAF Greg Kroah-Hartman
` (79 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yan Lei, Mauro Carvalho Chehab, Sasha Levin
From: Yan Lei <yan_lei@dahuatech.com>
[ Upstream commit a15fe8d9f1bf460a804bcf18a890bfd2cf0d5caa ]
Link: https://lore.kernel.org/linux-media/20220410061925.4107-1-chinayanlei2002@163.com
Signed-off-by: Yan Lei <yan_lei@dahuatech.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/dvb-frontends/bcm3510.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/dvb-frontends/bcm3510.c b/drivers/media/dvb-frontends/bcm3510.c
index da0ff7b44da4..68b92b4419cf 100644
--- a/drivers/media/dvb-frontends/bcm3510.c
+++ b/drivers/media/dvb-frontends/bcm3510.c
@@ -649,6 +649,7 @@ static int bcm3510_download_firmware(struct dvb_frontend* fe)
deb_info("firmware chunk, addr: 0x%04x, len: 0x%04x, total length: 0x%04zx\n",addr,len,fw->size);
if ((ret = bcm3510_write_ram(st,addr,&b[i+4],len)) < 0) {
err("firmware download failed: %d\n",ret);
+ release_firmware(fw);
return ret;
}
i += 4 + len;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 663/731] media: dvbdev: adopts refcnt to avoid UAF
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (661 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 662/731] media: dvb-frontends: fix leak of memory fw Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 664/731] media: dvb-usb: fix memory leak in dvb_usb_adapter_init() Greg Kroah-Hartman
` (78 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lin Ma, kernel test robot,
Mauro Carvalho Chehab, Sasha Levin
From: Lin Ma <linma@zju.edu.cn>
[ Upstream commit 0fc044b2b5e2d05a1fa1fb0d7f270367a7855d79 ]
dvb_unregister_device() is known that prone to use-after-free.
That is, the cleanup from dvb_unregister_device() releases the dvb_device
even if there are pointers stored in file->private_data still refer to it.
This patch adds a reference counter into struct dvb_device and delays its
deallocation until no pointer refers to the object.
Link: https://lore.kernel.org/linux-media/20220807145952.10368-1-linma@zju.edu.cn
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/dvb-core/dvb_ca_en50221.c | 2 +-
drivers/media/dvb-core/dvb_frontend.c | 2 +-
drivers/media/dvb-core/dvbdev.c | 32 +++++++++++++++++++------
include/media/dvbdev.h | 31 +++++++++++++-----------
4 files changed, 44 insertions(+), 23 deletions(-)
diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c
index 15a08d8c69ef..c2d2792227f8 100644
--- a/drivers/media/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb-core/dvb_ca_en50221.c
@@ -157,7 +157,7 @@ static void dvb_ca_private_free(struct dvb_ca_private *ca)
{
unsigned int i;
- dvb_free_device(ca->dvbdev);
+ dvb_device_put(ca->dvbdev);
for (i = 0; i < ca->slot_count; i++)
vfree(ca->slot_info[i].rx_buffer.data);
diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c
index 70d07cdcb2a6..09facc78d88a 100644
--- a/drivers/media/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb-core/dvb_frontend.c
@@ -136,7 +136,7 @@ static void __dvb_frontend_free(struct dvb_frontend *fe)
struct dvb_frontend_private *fepriv = fe->frontend_priv;
if (fepriv)
- dvb_free_device(fepriv->dvbdev);
+ dvb_device_put(fepriv->dvbdev);
dvb_frontend_invoke_release(fe, fe->ops.release);
diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index 795d9bfaba5c..6406653e46a4 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -107,7 +107,7 @@ static int dvb_device_open(struct inode *inode, struct file *file)
new_fops = fops_get(dvbdev->fops);
if (!new_fops)
goto fail;
- file->private_data = dvbdev;
+ file->private_data = dvb_device_get(dvbdev);
replace_fops(file, new_fops);
if (file->f_op->open)
err = file->f_op->open(inode, file);
@@ -171,6 +171,9 @@ int dvb_generic_release(struct inode *inode, struct file *file)
}
dvbdev->users++;
+
+ dvb_device_put(dvbdev);
+
return 0;
}
EXPORT_SYMBOL(dvb_generic_release);
@@ -487,6 +490,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
return -ENOMEM;
}
+ kref_init(&dvbdev->ref);
memcpy(dvbdev, template, sizeof(struct dvb_device));
dvbdev->type = type;
dvbdev->id = id;
@@ -518,7 +522,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
#endif
dvbdev->minor = minor;
- dvb_minors[minor] = dvbdev;
+ dvb_minors[minor] = dvb_device_get(dvbdev);
up_write(&minor_rwsem);
ret = dvb_register_media_device(dvbdev, type, minor, demux_sink_pads);
@@ -563,6 +567,7 @@ void dvb_remove_device(struct dvb_device *dvbdev)
down_write(&minor_rwsem);
dvb_minors[dvbdev->minor] = NULL;
+ dvb_device_put(dvbdev);
up_write(&minor_rwsem);
dvb_media_device_free(dvbdev);
@@ -574,21 +579,34 @@ void dvb_remove_device(struct dvb_device *dvbdev)
EXPORT_SYMBOL(dvb_remove_device);
-void dvb_free_device(struct dvb_device *dvbdev)
+static void dvb_free_device(struct kref *ref)
{
- if (!dvbdev)
- return;
+ struct dvb_device *dvbdev = container_of(ref, struct dvb_device, ref);
kfree (dvbdev->fops);
kfree (dvbdev);
}
-EXPORT_SYMBOL(dvb_free_device);
+
+
+struct dvb_device *dvb_device_get(struct dvb_device *dvbdev)
+{
+ kref_get(&dvbdev->ref);
+ return dvbdev;
+}
+EXPORT_SYMBOL(dvb_device_get);
+
+
+void dvb_device_put(struct dvb_device *dvbdev)
+{
+ if (dvbdev)
+ kref_put(&dvbdev->ref, dvb_free_device);
+}
void dvb_unregister_device(struct dvb_device *dvbdev)
{
dvb_remove_device(dvbdev);
- dvb_free_device(dvbdev);
+ dvb_device_put(dvbdev);
}
EXPORT_SYMBOL(dvb_unregister_device);
diff --git a/include/media/dvbdev.h b/include/media/dvbdev.h
index 2f6b0861322a..149b3d33c24b 100644
--- a/include/media/dvbdev.h
+++ b/include/media/dvbdev.h
@@ -156,6 +156,7 @@ struct dvb_adapter {
*/
struct dvb_device {
struct list_head list_head;
+ struct kref ref;
const struct file_operations *fops;
struct dvb_adapter *adapter;
enum dvb_device_type type;
@@ -187,6 +188,20 @@ struct dvb_device {
void *priv;
};
+/**
+ * dvb_device_get - Increase dvb_device reference
+ *
+ * @dvbdev: pointer to struct dvb_device
+ */
+struct dvb_device *dvb_device_get(struct dvb_device *dvbdev);
+
+/**
+ * dvb_device_get - Decrease dvb_device reference
+ *
+ * @dvbdev: pointer to struct dvb_device
+ */
+void dvb_device_put(struct dvb_device *dvbdev);
+
/**
* dvb_register_adapter - Registers a new DVB adapter
*
@@ -231,29 +246,17 @@ int dvb_register_device(struct dvb_adapter *adap,
/**
* dvb_remove_device - Remove a registered DVB device
*
- * This does not free memory. To do that, call dvb_free_device().
+ * This does not free memory. dvb_free_device() will do that when
+ * reference counter is empty
*
* @dvbdev: pointer to struct dvb_device
*/
void dvb_remove_device(struct dvb_device *dvbdev);
-/**
- * dvb_free_device - Free memory occupied by a DVB device.
- *
- * Call dvb_unregister_device() before calling this function.
- *
- * @dvbdev: pointer to struct dvb_device
- */
-void dvb_free_device(struct dvb_device *dvbdev);
/**
* dvb_unregister_device - Unregisters a DVB device
*
- * This is a combination of dvb_remove_device() and dvb_free_device().
- * Using this function is usually a mistake, and is often an indicator
- * for a use-after-free bug (when a userspace process keeps a file
- * handle to a detached device).
- *
* @dvbdev: pointer to struct dvb_device
*/
void dvb_unregister_device(struct dvb_device *dvbdev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 664/731] media: dvb-usb: fix memory leak in dvb_usb_adapter_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (662 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 663/731] media: dvbdev: adopts refcnt to avoid UAF Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 665/731] blk-mq: fix possible memleak when register hctx failed Greg Kroah-Hartman
` (77 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mazin Al Haddad,
Mauro Carvalho Chehab, Sasha Levin, syzbot+f66dd31987e6740657be
From: Mazin Al Haddad <mazinalhaddad05@gmail.com>
[ Upstream commit 94d90fb06b94a90c176270d38861bcba34ce377d ]
Syzbot reports a memory leak in "dvb_usb_adapter_init()".
The leak is due to not accounting for and freeing current iteration's
adapter->priv in case of an error. Currently if an error occurs,
it will exit before incrementing "num_adapters_initalized",
which is used as a reference counter to free all adap->priv
in "dvb_usb_adapter_exit()". There are multiple error paths that
can exit from before incrementing the counter. Including the
error handling paths for "dvb_usb_adapter_stream_init()",
"dvb_usb_adapter_dvb_init()" and "dvb_usb_adapter_frontend_init()"
within "dvb_usb_adapter_init()".
This means that in case of an error in any of these functions the
current iteration is not accounted for and the current iteration's
adap->priv is not freed.
Fix this by freeing the current iteration's adap->priv in the
"stream_init_err:" label in the error path. The rest of the
(accounted for) adap->priv objects are freed in dvb_usb_adapter_exit()
as expected using the num_adapters_initalized variable.
Syzbot report:
BUG: memory leak
unreferenced object 0xffff8881172f1a00 (size 512):
comm "kworker/0:2", pid 139, jiffies 4294994873 (age 10.960s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff844af012>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:75 [inline]
[<ffffffff844af012>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline]
[<ffffffff844af012>] dvb_usb_device_init.cold+0x4e5/0x79e drivers/media/usb/dvb-usb/dvb-usb-init.c:308
[<ffffffff830db21d>] dib0700_probe+0x8d/0x1b0 drivers/media/usb/dvb-usb/dib0700_core.c:883
[<ffffffff82d3fdc7>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
[<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
[<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
[<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752
[<ffffffff8274af6a>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:782
[<ffffffff8274b786>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:899
[<ffffffff82747c87>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
[<ffffffff8274b352>] __device_attach+0x122/0x260 drivers/base/dd.c:970
[<ffffffff827498f6>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
[<ffffffff82745cdb>] device_add+0x5fb/0xdf0 drivers/base/core.c:3405
[<ffffffff82d3d202>] usb_set_configuration+0x8f2/0xb80 drivers/usb/core/message.c:2170
[<ffffffff82d4dbfc>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
[<ffffffff82d3f49c>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
[<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
[<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
[<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
[<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752
Link: https://syzkaller.appspot.com/bug?extid=f66dd31987e6740657be
Reported-and-tested-by: syzbot+f66dd31987e6740657be@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-media/20220824012152.539788-1-mazinalhaddad05@gmail.com
Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/dvb-usb/dvb-usb-init.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index 61439c8f33ca..58eea8ab5477 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -81,7 +81,7 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
ret = dvb_usb_adapter_stream_init(adap);
if (ret)
- return ret;
+ goto stream_init_err;
ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs);
if (ret)
@@ -114,6 +114,8 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
dvb_usb_adapter_dvb_exit(adap);
dvb_init_err:
dvb_usb_adapter_stream_exit(adap);
+stream_init_err:
+ kfree(adap->priv);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 665/731] blk-mq: fix possible memleak when register hctx failed
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (663 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 664/731] media: dvb-usb: fix memory leak in dvb_usb_adapter_init() Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 666/731] drm/amd/display: Use the largest vready_offset in pipe group Greg Kroah-Hartman
` (76 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ye Bin, Ming Lei, Jens Axboe, Sasha Levin
From: Ye Bin <yebin10@huawei.com>
[ Upstream commit 4b7a21c57b14fbcd0e1729150189e5933f5088e9 ]
There's issue as follows when do fault injection test:
unreferenced object 0xffff888132a9f400 (size 512):
comm "insmod", pid 308021, jiffies 4324277909 (age 509.733s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 f4 a9 32 81 88 ff ff ...........2....
08 f4 a9 32 81 88 ff ff 00 00 00 00 00 00 00 00 ...2............
backtrace:
[<00000000e8952bb4>] kmalloc_node_trace+0x22/0xa0
[<00000000f9980e0f>] blk_mq_alloc_and_init_hctx+0x3f1/0x7e0
[<000000002e719efa>] blk_mq_realloc_hw_ctxs+0x1e6/0x230
[<000000004f1fda40>] blk_mq_init_allocated_queue+0x27e/0x910
[<00000000287123ec>] __blk_mq_alloc_disk+0x67/0xf0
[<00000000a2a34657>] 0xffffffffa2ad310f
[<00000000b173f718>] 0xffffffffa2af824a
[<0000000095a1dabb>] do_one_initcall+0x87/0x2a0
[<00000000f32fdf93>] do_init_module+0xdf/0x320
[<00000000cbe8541e>] load_module+0x3006/0x3390
[<0000000069ed1bdb>] __do_sys_finit_module+0x113/0x1b0
[<00000000a1a29ae8>] do_syscall_64+0x35/0x80
[<000000009cd878b0>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fault injection context as follows:
kobject_add
blk_mq_register_hctx
blk_mq_sysfs_register
blk_register_queue
device_add_disk
null_add_dev.part.0 [null_blk]
As 'blk_mq_register_hctx' may already add some objects when failed halfway,
but there isn't do fallback, caller don't know which objects add failed.
To solve above issue just do fallback when add objects failed halfway in
'blk_mq_register_hctx'.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221117022940.873959-1-yebin@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-mq-sysfs.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/block/blk-mq-sysfs.c b/block/blk-mq-sysfs.c
index 253c857cba47..7074ce8d2d03 100644
--- a/block/blk-mq-sysfs.c
+++ b/block/blk-mq-sysfs.c
@@ -187,7 +187,7 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)
{
struct request_queue *q = hctx->queue;
struct blk_mq_ctx *ctx;
- int i, ret;
+ int i, j, ret;
if (!hctx->nr_ctx)
return 0;
@@ -199,9 +199,16 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)
hctx_for_each_ctx(hctx, ctx, i) {
ret = kobject_add(&ctx->kobj, &hctx->kobj, "cpu%u", ctx->cpu);
if (ret)
- break;
+ goto out;
}
+ return 0;
+out:
+ hctx_for_each_ctx(hctx, ctx, j) {
+ if (j < i)
+ kobject_del(&ctx->kobj);
+ }
+ kobject_del(&hctx->kobj);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 666/731] drm/amd/display: Use the largest vready_offset in pipe group
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (664 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 665/731] blk-mq: fix possible memleak when register hctx failed Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 667/731] libbpf: Avoid enum forward-declarations in public API in C++ mode Greg Kroah-Hartman
` (75 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dillon Varone, Jasdeep Dhillon,
Wesley Chalmers, Alex Deucher, Sasha Levin
From: Wesley Chalmers <Wesley.Chalmers@amd.com>
[ Upstream commit 5842abd985b792a3b13a89b6dae4869b56656c92 ]
[WHY]
Corruption can occur in LB if vready_offset is not large enough.
DML calculates vready_offset for each pipe, but we currently select the
top pipe's vready_offset, which is not necessarily enough for all pipes
in the group.
[HOW]
Wherever program_global_sync is currently called, iterate through the
entire pipe group and find the highest vready_offset.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 30 +++++++++++++++++--
.../drm/amd/display/dc/dcn20/dcn20_hwseq.c | 29 ++++++++++++++++--
2 files changed, 55 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 91ab4dbbe1a6..c655d03ef754 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -804,6 +804,32 @@ static void false_optc_underflow_wa(
tg->funcs->clear_optc_underflow(tg);
}
+static int calculate_vready_offset_for_group(struct pipe_ctx *pipe)
+{
+ struct pipe_ctx *other_pipe;
+ int vready_offset = pipe->pipe_dlg_param.vready_offset;
+
+ /* Always use the largest vready_offset of all connected pipes */
+ for (other_pipe = pipe->bottom_pipe; other_pipe != NULL; other_pipe = other_pipe->bottom_pipe) {
+ if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+ vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+ }
+ for (other_pipe = pipe->top_pipe; other_pipe != NULL; other_pipe = other_pipe->top_pipe) {
+ if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+ vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+ }
+ for (other_pipe = pipe->next_odm_pipe; other_pipe != NULL; other_pipe = other_pipe->next_odm_pipe) {
+ if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+ vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+ }
+ for (other_pipe = pipe->prev_odm_pipe; other_pipe != NULL; other_pipe = other_pipe->prev_odm_pipe) {
+ if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+ vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+ }
+
+ return vready_offset;
+}
+
enum dc_status dcn10_enable_stream_timing(
struct pipe_ctx *pipe_ctx,
struct dc_state *context,
@@ -838,7 +864,7 @@ enum dc_status dcn10_enable_stream_timing(
pipe_ctx->stream_res.tg->funcs->program_timing(
pipe_ctx->stream_res.tg,
&stream->timing,
- pipe_ctx->pipe_dlg_param.vready_offset,
+ calculate_vready_offset_for_group(pipe_ctx),
pipe_ctx->pipe_dlg_param.vstartup_start,
pipe_ctx->pipe_dlg_param.vupdate_offset,
pipe_ctx->pipe_dlg_param.vupdate_width,
@@ -2776,7 +2802,7 @@ void dcn10_program_pipe(
pipe_ctx->stream_res.tg->funcs->program_global_sync(
pipe_ctx->stream_res.tg,
- pipe_ctx->pipe_dlg_param.vready_offset,
+ calculate_vready_offset_for_group(pipe_ctx),
pipe_ctx->pipe_dlg_param.vstartup_start,
pipe_ctx->pipe_dlg_param.vupdate_offset,
pipe_ctx->pipe_dlg_param.vupdate_width);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 58eea3aa3bfc..bf2a8f53694b 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -1564,6 +1564,31 @@ static void dcn20_update_dchubp_dpp(
hubp->funcs->set_blank(hubp, false);
}
+static int calculate_vready_offset_for_group(struct pipe_ctx *pipe)
+{
+ struct pipe_ctx *other_pipe;
+ int vready_offset = pipe->pipe_dlg_param.vready_offset;
+
+ /* Always use the largest vready_offset of all connected pipes */
+ for (other_pipe = pipe->bottom_pipe; other_pipe != NULL; other_pipe = other_pipe->bottom_pipe) {
+ if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+ vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+ }
+ for (other_pipe = pipe->top_pipe; other_pipe != NULL; other_pipe = other_pipe->top_pipe) {
+ if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+ vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+ }
+ for (other_pipe = pipe->next_odm_pipe; other_pipe != NULL; other_pipe = other_pipe->next_odm_pipe) {
+ if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+ vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+ }
+ for (other_pipe = pipe->prev_odm_pipe; other_pipe != NULL; other_pipe = other_pipe->prev_odm_pipe) {
+ if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+ vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+ }
+
+ return vready_offset;
+}
static void dcn20_program_pipe(
struct dc *dc,
@@ -1582,7 +1607,7 @@ static void dcn20_program_pipe(
pipe_ctx->stream_res.tg->funcs->program_global_sync(
pipe_ctx->stream_res.tg,
- pipe_ctx->pipe_dlg_param.vready_offset,
+ calculate_vready_offset_for_group(pipe_ctx),
pipe_ctx->pipe_dlg_param.vstartup_start,
pipe_ctx->pipe_dlg_param.vupdate_offset,
pipe_ctx->pipe_dlg_param.vupdate_width);
@@ -1875,7 +1900,7 @@ bool dcn20_update_bandwidth(
pipe_ctx->stream_res.tg->funcs->program_global_sync(
pipe_ctx->stream_res.tg,
- pipe_ctx->pipe_dlg_param.vready_offset,
+ calculate_vready_offset_for_group(pipe_ctx),
pipe_ctx->pipe_dlg_param.vstartup_start,
pipe_ctx->pipe_dlg_param.vupdate_offset,
pipe_ctx->pipe_dlg_param.vupdate_width);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 667/731] libbpf: Avoid enum forward-declarations in public API in C++ mode
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (665 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 666/731] drm/amd/display: Use the largest vready_offset in pipe group Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 668/731] regulator: core: fix use_count leakage when handling boot-on Greg Kroah-Hartman
` (74 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrii Nakryiko, Daniel Borkmann,
Sasha Levin
From: Andrii Nakryiko <andrii@kernel.org>
[ Upstream commit b42693415b86f608049cf1b4870adc1dc65e58b0 ]
C++ enum forward declarations are fundamentally not compatible with pure
C enum definitions, and so libbpf's use of `enum bpf_stats_type;`
forward declaration in libbpf/bpf.h public API header is causing C++
compilation issues.
More details can be found in [0], but it comes down to C++ supporting
enum forward declaration only with explicitly specified backing type:
enum bpf_stats_type: int;
In C (and I believe it's a GCC extension also), such forward declaration
is simply:
enum bpf_stats_type;
Further, in Linux UAPI this enum is defined in pure C way:
enum bpf_stats_type { BPF_STATS_RUN_TIME = 0; }
And even though in both cases backing type is int, which can be
confirmed by looking at DWARF information, for C++ compiler actual enum
definition and forward declaration are incompatible.
To eliminate this problem, for C++ mode define input argument as int,
which makes enum unnecessary in libbpf public header. This solves the
issue and as demonstrated by next patch doesn't cause any unwanted
compiler warnings, at least with default warnings setting.
[0] https://stackoverflow.com/questions/42766839/c11-enum-forward-causes-underlying-type-mismatch
[1] Closes: https://github.com/libbpf/libbpf/issues/249
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221130200013.2997831-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/bpf.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h
index 6fffb3cdf39b..49bd43b998c8 100644
--- a/tools/lib/bpf/bpf.h
+++ b/tools/lib/bpf/bpf.h
@@ -249,8 +249,15 @@ LIBBPF_API int bpf_task_fd_query(int pid, int fd, __u32 flags, char *buf,
__u32 *buf_len, __u32 *prog_id, __u32 *fd_type,
__u64 *probe_offset, __u64 *probe_addr);
+#ifdef __cplusplus
+/* forward-declaring enums in C++ isn't compatible with pure C enums, so
+ * instead define bpf_enable_stats() as accepting int as an input
+ */
+LIBBPF_API int bpf_enable_stats(int type);
+#else
enum bpf_stats_type; /* defined in up-to-date linux/bpf.h */
LIBBPF_API int bpf_enable_stats(enum bpf_stats_type type);
+#endif
struct bpf_prog_bind_opts {
size_t sz; /* size of this struct for forward/backward compatibility */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 668/731] regulator: core: fix use_count leakage when handling boot-on
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (666 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 667/731] libbpf: Avoid enum forward-declarations in public API in C++ mode Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 669/731] wifi: mt76: do not run mt76u_status_worker if the device is not running Greg Kroah-Hartman
` (73 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Rui Zhang, Mark Brown, Sasha Levin
From: Rui Zhang <zr.zhang@vivo.com>
[ Upstream commit 0591b14ce0398125439c759f889647369aa616a0 ]
I found a use_count leakage towards supply regulator of rdev with
boot-on option.
┌───────────────────┐ ┌───────────────────┐
│ regulator_dev A │ │ regulator_dev B │
│ (boot-on) │ │ (boot-on) │
│ use_count=0 │◀──supply──│ use_count=1 │
│ │ │ │
└───────────────────┘ └───────────────────┘
In case of rdev(A) configured with `regulator-boot-on', the use_count
of supplying regulator(B) will increment inside
regulator_enable(rdev->supply).
Thus, B will acts like always-on, and further balanced
regulator_enable/disable cannot actually disable it anymore.
However, B was also configured with `regulator-boot-on', we wish it
could be disabled afterwards.
Signed-off-by: Rui Zhang <zr.zhang@vivo.com>
Link: https://lore.kernel.org/r/20221201033806.2567812-1-zr.zhang@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/core.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 1a5aeb4868aa..eababed938a0 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1531,7 +1531,13 @@ static int set_machine_constraints(struct regulator_dev *rdev)
if (rdev->supply_name && !rdev->supply)
return -EPROBE_DEFER;
- if (rdev->supply) {
+ /* If supplying regulator has already been enabled,
+ * it's not intended to have use_count increment
+ * when rdev is only boot-on.
+ */
+ if (rdev->supply &&
+ (rdev->constraints->always_on ||
+ !regulator_is_enabled(rdev->supply))) {
ret = regulator_enable(rdev->supply);
if (ret < 0) {
_regulator_put(rdev->supply);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 669/731] wifi: mt76: do not run mt76u_status_worker if the device is not running
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (667 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 668/731] regulator: core: fix use_count leakage when handling boot-on Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 670/731] mmc: f-sdh30: Add quirks for broken timeout clock capability Greg Kroah-Hartman
` (72 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dokyung Song, Deren Wu,
Lorenzo Bianconi, Felix Fietkau, Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit bd5dac7ced5a7c9faa4dc468ac9560c3256df845 ]
Fix the following NULL pointer dereference avoiding to run
mt76u_status_worker thread if the device is not running yet.
KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: mt76 mt76u_tx_status_data
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:ffffc900005af988 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a
RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c
R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8
R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28
FS: 0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
mt76x02_send_tx_status+0x1d2/0xeb0
mt76x02_tx_status_data+0x8e/0xd0
mt76u_tx_status_data+0xe1/0x240
process_one_work+0x92b/0x1460
worker_thread+0x95/0xe00
kthread+0x3a1/0x480
ret_from_fork+0x1f/0x30
Modules linked in:
--[ end trace 8df5d20fc5040f65 ]--
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:ffffc900005af988 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a
RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c
R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8
R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28
FS: 0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0
PKRU: 55555554
Moreover move stat_work schedule out of the for loop.
Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/usb.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
index 1e9f60bb811a..b47343e321b8 100644
--- a/drivers/net/wireless/mediatek/mt76/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/usb.c
@@ -814,6 +814,9 @@ static void mt76u_status_worker(struct mt76_worker *w)
struct mt76_queue *q;
int i;
+ if (!test_bit(MT76_STATE_RUNNING, &dev->phy.state))
+ return;
+
for (i = 0; i < IEEE80211_NUM_ACS; i++) {
q = dev->phy.q_tx[i];
if (!q)
@@ -833,11 +836,11 @@ static void mt76u_status_worker(struct mt76_worker *w)
wake_up(&dev->tx_wait);
mt76_worker_schedule(&dev->tx_worker);
-
- if (dev->drv->tx_status_data &&
- !test_and_set_bit(MT76_READING_STATS, &dev->phy.state))
- queue_work(dev->wq, &dev->usb.stat_work);
}
+
+ if (dev->drv->tx_status_data &&
+ !test_and_set_bit(MT76_READING_STATS, &dev->phy.state))
+ queue_work(dev->wq, &dev->usb.stat_work);
}
static void mt76u_tx_status_data(struct work_struct *work)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 670/731] mmc: f-sdh30: Add quirks for broken timeout clock capability
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (668 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 669/731] wifi: mt76: do not run mt76u_status_worker if the device is not running Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 671/731] mmc: renesas_sdhi: better reset from HS400 mode Greg Kroah-Hartman
` (71 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kunihiko Hayashi, Jassi Brar,
Ulf Hansson, Sasha Levin
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
[ Upstream commit aae9d3a440736691b3c1cb09ae2c32c4f1ee2e67 ]
There is a case where the timeout clock is not supplied to the capability.
Add a quirk for that.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20221111081033.3813-7-hayashi.kunihiko@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/sdhci_f_sdh30.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/host/sdhci_f_sdh30.c b/drivers/mmc/host/sdhci_f_sdh30.c
index 3f5977979cf2..6c4f43e11282 100644
--- a/drivers/mmc/host/sdhci_f_sdh30.c
+++ b/drivers/mmc/host/sdhci_f_sdh30.c
@@ -168,6 +168,9 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev)
if (reg & SDHCI_CAN_DO_8BIT)
priv->vendor_hs200 = F_SDH30_EMMC_HS200;
+ if (!(reg & SDHCI_TIMEOUT_CLK_MASK))
+ host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+
ret = sdhci_add_host(host);
if (ret)
goto err_add_host;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 671/731] mmc: renesas_sdhi: better reset from HS400 mode
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (669 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 670/731] mmc: f-sdh30: Add quirks for broken timeout clock capability Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 672/731] media: si470x: Fix use-after-free in si470x_int_in_callback() Greg Kroah-Hartman
` (70 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wolfram Sang, Yoshihiro Shimoda,
Ulf Hansson, Sasha Levin
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
[ Upstream commit 0da69dd2155019ed4c444ede0e79ce7a4a6af627 ]
Up to now, HS400 adjustment mode was only disabled on soft reset when a
calibration table was in use. It is safer, though, to disable it as soon
as the instance has an adjustment related quirk set, i.e. bad taps or a
calibration table.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/renesas_sdhi_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index f443debbcb98..12921fba4f52 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -520,7 +520,7 @@ static void renesas_sdhi_reset_hs400_mode(struct tmio_mmc_host *host,
SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL) &
sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2));
- if (priv->adjust_hs400_calib_table)
+ if (priv->quirks && (priv->quirks->hs400_calib_table || priv->quirks->hs400_bad_taps))
renesas_sdhi_adjust_hs400_mode_disable(host);
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 672/731] media: si470x: Fix use-after-free in si470x_int_in_callback()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (670 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 671/731] mmc: renesas_sdhi: better reset from HS400 mode Greg Kroah-Hartman
@ 2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 673/731] clk: st: Fix memory leak in st_of_quadfs_setup() Greg Kroah-Hartman
` (69 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:42 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+9ca7a12fd736d93e0232,
Shigeru Yoshida, Hans Verkuil, Sasha Levin
From: Shigeru Yoshida <syoshida@redhat.com>
[ Upstream commit 7d21e0b1b41b21d628bf2afce777727bd4479aa5 ]
syzbot reported use-after-free in si470x_int_in_callback() [1]. This
indicates that urb->context, which contains struct si470x_device
object, is freed when si470x_int_in_callback() is called.
The cause of this issue is that si470x_int_in_callback() is called for
freed urb.
si470x_usb_driver_probe() calls si470x_start_usb(), which then calls
usb_submit_urb() and si470x_start(). If si470x_start_usb() fails,
si470x_usb_driver_probe() doesn't kill urb, but it just frees struct
si470x_device object, as depicted below:
si470x_usb_driver_probe()
...
si470x_start_usb()
...
usb_submit_urb()
retval = si470x_start()
return retval
if (retval < 0)
free struct si470x_device object, but don't kill urb
This patch fixes this issue by killing urb when si470x_start_usb()
fails and urb is submitted. If si470x_start_usb() fails and urb is
not submitted, i.e. submitting usb fails, it just frees struct
si470x_device object.
Reported-by: syzbot+9ca7a12fd736d93e0232@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=94ed6dddd5a55e90fd4bab942aa4bb297741d977 [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/radio/si470x/radio-si470x-usb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index 3f8634a46573..1365ae732b79 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -733,8 +733,10 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
/* start radio */
retval = si470x_start_usb(radio);
- if (retval < 0)
+ if (retval < 0 && !radio->int_in_running)
goto err_buf;
+ else if (retval < 0) /* in case of radio->int_in_running == 1 */
+ goto err_all;
/* set initial frequency */
si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 673/731] clk: st: Fix memory leak in st_of_quadfs_setup()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (671 preceding siblings ...)
2022-12-28 14:42 ` [PATCH 5.15 672/731] media: si470x: Fix use-after-free in si470x_int_in_callback() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 674/731] crypto: hisilicon/hpre - fix resource leak in remove process Greg Kroah-Hartman
` (68 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiu Jianfeng, Patrice Chotard,
Stephen Boyd, Sasha Levin
From: Xiu Jianfeng <xiujianfeng@huawei.com>
[ Upstream commit cfd3ffb36f0d566846163118651d868e607300ba ]
If st_clk_register_quadfs_pll() fails, @lock should be freed before goto
@err_exit, otherwise will cause meory leak issue, fix it.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221122133614.184910-1-xiujianfeng@huawei.com
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/st/clkgen-fsyn.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 164285d6be97..ba18e58f0aae 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -1008,9 +1008,10 @@ static void __init st_of_quadfs_setup(struct device_node *np,
clk = st_clk_register_quadfs_pll(pll_name, clk_parent_name, datac->data,
reg, lock);
- if (IS_ERR(clk))
+ if (IS_ERR(clk)) {
+ kfree(lock);
goto err_exit;
- else
+ } else
pr_debug("%s: parent %s rate %u\n",
__clk_get_name(clk),
__clk_get_name(clk_get_parent(clk)),
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 674/731] crypto: hisilicon/hpre - fix resource leak in remove process
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (672 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 673/731] clk: st: Fix memory leak in st_of_quadfs_setup() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 675/731] scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs Greg Kroah-Hartman
` (67 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zhiqi Song, Herbert Xu, Sasha Levin
From: Zhiqi Song <songzhiqi1@huawei.com>
[ Upstream commit 45e6319bd5f2154d8b8c9f1eaa4ac030ba0d330c ]
In hpre_remove(), when the disable operation of qm sriov failed,
the following logic should continue to be executed to release the
remaining resources that have been allocated, instead of returning
directly, otherwise there will be resource leakage.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/hisilicon/hpre/hpre_main.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c
index 65a641396c07..edc61e4105f3 100644
--- a/drivers/crypto/hisilicon/hpre/hpre_main.c
+++ b/drivers/crypto/hisilicon/hpre/hpre_main.c
@@ -1143,18 +1143,12 @@ static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id)
static void hpre_remove(struct pci_dev *pdev)
{
struct hisi_qm *qm = pci_get_drvdata(pdev);
- int ret;
hisi_qm_pm_uninit(qm);
hisi_qm_wait_task_finish(qm, &hpre_devices);
hisi_qm_alg_unregister(qm, &hpre_devices);
- if (qm->fun_type == QM_HW_PF && qm->vfs_num) {
- ret = hisi_qm_sriov_disable(pdev, true);
- if (ret) {
- pci_err(pdev, "Disable SRIOV fail!\n");
- return;
- }
- }
+ if (qm->fun_type == QM_HW_PF && qm->vfs_num)
+ hisi_qm_sriov_disable(pdev, true);
hpre_debugfs_exit(qm);
hisi_qm_stop(qm, QM_NORMAL);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 675/731] scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (673 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 674/731] crypto: hisilicon/hpre - fix resource leak in remove process Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 676/731] scsi: ufs: Reduce the START STOP UNIT timeout Greg Kroah-Hartman
` (66 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Justin Tee, Martin K. Petersen, Sasha Levin
From: Justin Tee <justin.tee@broadcom.com>
[ Upstream commit c44e50f4a0ec00c2298f31f91bc2c3e9bbd81c7e ]
During I/O and simultaneous cat of /sys/kernel/debug/lpfc/fnX/rx_monitor, a
hard lockup similar to the call trace below may occur.
The spin_lock_bh in lpfc_rx_monitor_report is not protecting from timer
interrupts as expected, so change the strength of the spin lock to _irq.
Kernel panic - not syncing: Hard LOCKUP
CPU: 3 PID: 110402 Comm: cat Kdump: loaded
exception RIP: native_queued_spin_lock_slowpath+91
[IRQ stack]
native_queued_spin_lock_slowpath at ffffffffb814e30b
_raw_spin_lock at ffffffffb89a667a
lpfc_rx_monitor_record at ffffffffc0a73a36 [lpfc]
lpfc_cmf_timer at ffffffffc0abbc67 [lpfc]
__hrtimer_run_queues at ffffffffb8184250
hrtimer_interrupt at ffffffffb8184ab0
smp_apic_timer_interrupt at ffffffffb8a026ba
apic_timer_interrupt at ffffffffb8a01c4f
[End of IRQ stack]
apic_timer_interrupt at ffffffffb8a01c4f
lpfc_rx_monitor_report at ffffffffc0a73c80 [lpfc]
lpfc_rx_monitor_read at ffffffffc0addde1 [lpfc]
full_proxy_read at ffffffffb83e7fc3
vfs_read at ffffffffb833fe71
ksys_read at ffffffffb83402af
do_syscall_64 at ffffffffb800430b
entry_SYSCALL_64_after_hwframe at ffffffffb8a000ad
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221017164323.14536-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/lpfc/lpfc_sli.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index d6e761adf1f1..df3b190fccd1 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -7992,10 +7992,10 @@ u32 lpfc_rx_monitor_report(struct lpfc_hba *phba,
"IO_cnt", "Info", "BWutil(ms)");
}
- /* Needs to be _bh because record is called from timer interrupt
+ /* Needs to be _irq because record is called from timer interrupt
* context
*/
- spin_lock_bh(ring_lock);
+ spin_lock_irq(ring_lock);
while (*head_idx != *tail_idx) {
entry = &ring[*head_idx];
@@ -8039,7 +8039,7 @@ u32 lpfc_rx_monitor_report(struct lpfc_hba *phba,
if (cnt >= max_read_entries)
break;
}
- spin_unlock_bh(ring_lock);
+ spin_unlock_irq(ring_lock);
return cnt;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 676/731] scsi: ufs: Reduce the START STOP UNIT timeout
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (674 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 675/731] scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 677/731] scsi: elx: libefc: Fix second parameter type in state callbacks Greg Kroah-Hartman
` (65 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bart Van Assche, Martin K. Petersen,
Sasha Levin
From: Bart Van Assche <bvanassche@acm.org>
[ Upstream commit dcd5b7637c6d442d957f73780a03047413ed3a10 ]
Reduce the START STOP UNIT command timeout to one second since on Android
devices a kernel panic is triggered if an attempt to suspend the system
takes more than 20 seconds. One second should be enough for the START STOP
UNIT command since this command completes in less than a millisecond for
the UFS devices I have access to.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/ufs/ufshcd.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index dae1a85f1512..a428b8145dcc 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8476,8 +8476,6 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
struct scsi_device *sdp;
unsigned long flags;
int ret, retries;
- unsigned long deadline;
- int32_t remaining;
spin_lock_irqsave(hba->host->host_lock, flags);
sdp = hba->sdev_ufs_device;
@@ -8510,14 +8508,9 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
* callbacks hence set the RQF_PM flag so that it doesn't resume the
* already suspended childs.
*/
- deadline = jiffies + 10 * HZ;
for (retries = 3; retries > 0; --retries) {
- ret = -ETIMEDOUT;
- remaining = deadline - jiffies;
- if (remaining <= 0)
- break;
ret = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
- remaining / HZ, 0, 0, RQF_PM, NULL);
+ HZ, 0, 0, RQF_PM, NULL);
if (!scsi_status_is_check_condition(ret) ||
!scsi_sense_valid(&sshdr) ||
sshdr.sense_key != UNIT_ATTENTION)
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 677/731] scsi: elx: libefc: Fix second parameter type in state callbacks
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (675 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 676/731] scsi: ufs: Reduce the START STOP UNIT timeout Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 678/731] hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param() Greg Kroah-Hartman
` (64 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sami Tolvanen, Nathan Chancellor,
Kees Cook, Martin K. Petersen, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 3d75e766b58a7410d4e835c534e1b4664a8f62d0 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function pointer
prototype to make sure the call target is valid to help mitigate ROP
attacks. If they are not identical, there is a failure at run time, which
manifests as either a kernel panic or thread getting killed. A proposed
warning in clang aims to catch these at compile time, which reveals:
drivers/scsi/elx/libefc/efc_node.c:811:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
ctx->current_state = state;
^ ~~~~~
drivers/scsi/elx/libefc/efc_node.c:878:21: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
node->nodedb_state = state;
^ ~~~~~
drivers/scsi/elx/libefc/efc_node.c:905:6: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' from 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') [-Werror,-Wincompatible-function-pointer-types-strict]
pf = node->nodedb_state;
^ ~~~~~~~~~~~~~~~~~~
drivers/scsi/elx/libefc/efc_device.c:455:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
node->nodedb_state = __efc_d_init;
^ ~~~~~~~~~~~~
drivers/scsi/elx/libefc/efc_sm.c:41:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
ctx->current_state = state;
^ ~~~~~
The type of the second parameter in the prototypes of ->current_state() and
->nodedb_state() ('u32') does not match the implementations, which have a
second parameter type of 'enum efc_sm_event'. Update the prototypes to have
the correct second parameter type, clearing up all the warnings and CFI
failures.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221102161906.2781508-1-nathan@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/elx/libefc/efclib.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/elx/libefc/efclib.h b/drivers/scsi/elx/libefc/efclib.h
index ee291cabf7e0..b14e516be7d5 100644
--- a/drivers/scsi/elx/libefc/efclib.h
+++ b/drivers/scsi/elx/libefc/efclib.h
@@ -58,10 +58,12 @@ enum efc_node_send_ls_acc {
#define EFC_LINK_STATUS_UP 0
#define EFC_LINK_STATUS_DOWN 1
+enum efc_sm_event;
+
/* State machine context header */
struct efc_sm_ctx {
void (*current_state)(struct efc_sm_ctx *ctx,
- u32 evt, void *arg);
+ enum efc_sm_event evt, void *arg);
const char *description;
void *app;
@@ -364,7 +366,7 @@ struct efc_node {
int prev_evt;
void (*nodedb_state)(struct efc_sm_ctx *ctx,
- u32 evt, void *arg);
+ enum efc_sm_event evt, void *arg);
struct timer_list gidpt_delay_timer;
u64 time_last_gidpt_msec;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 678/731] hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (676 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 677/731] scsi: elx: libefc: Fix second parameter type in state callbacks Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 679/731] drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid() Greg Kroah-Hartman
` (63 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+a3e6acd85ded5c16a709,
Hawkins Jiawei, Mike Kravetz, Muchun Song, Ian Kent,
Andrew Morton, Sasha Levin
From: Hawkins Jiawei <yin31149@gmail.com>
[ Upstream commit 26215b7ee923b9251f7bb12c4e5f09dc465d35f2 ]
Syzkaller reports a null-ptr-deref bug as follows:
======================================================
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:hugetlbfs_parse_param+0x1dd/0x8e0 fs/hugetlbfs/inode.c:1380
[...]
Call Trace:
<TASK>
vfs_parse_fs_param fs/fs_context.c:148 [inline]
vfs_parse_fs_param+0x1f9/0x3c0 fs/fs_context.c:129
vfs_parse_fs_string+0xdb/0x170 fs/fs_context.c:191
generic_parse_monolithic+0x16f/0x1f0 fs/fs_context.c:231
do_new_mount fs/namespace.c:3036 [inline]
path_mount+0x12de/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
======================================================
According to commit "vfs: parse: deal with zero length string value",
kernel will set the param->string to null pointer in vfs_parse_fs_string()
if fs string has zero length.
Yet the problem is that, hugetlbfs_parse_param() will dereference the
param->string, without checking whether it is a null pointer. To be more
specific, if hugetlbfs_parse_param() parses an illegal mount parameter,
such as "size=,", kernel will constructs struct fs_parameter with null
pointer in vfs_parse_fs_string(), then passes this struct fs_parameter to
hugetlbfs_parse_param(), which triggers the above null-ptr-deref bug.
This patch solves it by adding sanity check on param->string
in hugetlbfs_parse_param().
Link: https://lkml.kernel.org/r/20221020231609.4810-1-yin31149@gmail.com
Reported-by: syzbot+a3e6acd85ded5c16a709@syzkaller.appspotmail.com
Tested-by: syzbot+a3e6acd85ded5c16a709@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/0000000000005ad00405eb7148c6@google.com/
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hawkins Jiawei <yin31149@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/hugetlbfs/inode.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index be8deec29ebe..352230a011e0 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -1250,7 +1250,7 @@ static int hugetlbfs_parse_param(struct fs_context *fc, struct fs_parameter *par
case Opt_size:
/* memparse() will accept a K/M/G without a digit */
- if (!isdigit(param->string[0]))
+ if (!param->string || !isdigit(param->string[0]))
goto bad_val;
ctx->max_size_opt = memparse(param->string, &rest);
ctx->max_val_type = SIZE_STD;
@@ -1260,7 +1260,7 @@ static int hugetlbfs_parse_param(struct fs_context *fc, struct fs_parameter *par
case Opt_nr_inodes:
/* memparse() will accept a K/M/G without a digit */
- if (!isdigit(param->string[0]))
+ if (!param->string || !isdigit(param->string[0]))
goto bad_val;
ctx->nr_inodes = memparse(param->string, &rest);
return 0;
@@ -1276,7 +1276,7 @@ static int hugetlbfs_parse_param(struct fs_context *fc, struct fs_parameter *par
case Opt_min_size:
/* memparse() will accept a K/M/G without a digit */
- if (!isdigit(param->string[0]))
+ if (!param->string || !isdigit(param->string[0]))
goto bad_val;
ctx->min_size_opt = memparse(param->string, &rest);
ctx->min_val_type = SIZE_STD;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 679/731] drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (677 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 678/731] hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 680/731] drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid() Greg Kroah-Hartman
` (62 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sami Tolvanen, Nathan Chancellor,
Kees Cook, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 96d845a67b7e406cfed7880a724c8ca6121e022e ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:74:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_connector *, struct drm_display_mode *)' with an expression of type 'int (struct drm_connector *, struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = fsl_dcu_drm_connector_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
->mode_valid() in 'struct drm_connector_helper_funcs' expects a return
type of 'enum drm_mode_status', not 'int'. Adjust the return type of
fsl_dcu_drm_connector_mode_valid() to match the prototype's to resolve
the warning and CFI failure.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102154215.78059-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
index 4d4a715b429d..2c2b92324a2e 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
@@ -60,8 +60,9 @@ static int fsl_dcu_drm_connector_get_modes(struct drm_connector *connector)
return drm_panel_get_modes(fsl_connector->panel, connector);
}
-static int fsl_dcu_drm_connector_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
+static enum drm_mode_status
+fsl_dcu_drm_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
{
if (mode->hdisplay & 0xf)
return MODE_ERROR;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 680/731] drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (678 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 679/731] drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 681/731] orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string() Greg Kroah-Hartman
` (61 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nathan Chancellor, Kees Cook, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 0ad811cc08a937d875cbad0149c1bab17f84ba05 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/sti/sti_hda.c:637:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_connector *, struct drm_display_mode *)' with an expression of type 'int (struct drm_connector *, struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = sti_hda_connector_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/sti/sti_dvo.c:376:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_connector *, struct drm_display_mode *)' with an expression of type 'int (struct drm_connector *, struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = sti_dvo_connector_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/sti/sti_hdmi.c:1035:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_connector *, struct drm_display_mode *)' with an expression of type 'int (struct drm_connector *, struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = sti_hdmi_connector_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
->mode_valid() in 'struct drm_connector_helper_funcs' expects a return
type of 'enum drm_mode_status', not 'int'. Adjust the return type of
sti_{dvo,hda,hdmi}_connector_mode_valid() to match the prototype's to
resolve the warning and CFI failure.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102155623.3042869-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/sti/sti_dvo.c | 5 +++--
drivers/gpu/drm/sti/sti_hda.c | 5 +++--
drivers/gpu/drm/sti/sti_hdmi.c | 5 +++--
3 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/sti/sti_dvo.c b/drivers/gpu/drm/sti/sti_dvo.c
index f3a5616b7daf..577c477b5f46 100644
--- a/drivers/gpu/drm/sti/sti_dvo.c
+++ b/drivers/gpu/drm/sti/sti_dvo.c
@@ -346,8 +346,9 @@ static int sti_dvo_connector_get_modes(struct drm_connector *connector)
#define CLK_TOLERANCE_HZ 50
-static int sti_dvo_connector_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
+static enum drm_mode_status
+sti_dvo_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
{
int target = mode->clock * 1000;
int target_min = target - CLK_TOLERANCE_HZ;
diff --git a/drivers/gpu/drm/sti/sti_hda.c b/drivers/gpu/drm/sti/sti_hda.c
index c9e6db15ab66..aa54a6400ab8 100644
--- a/drivers/gpu/drm/sti/sti_hda.c
+++ b/drivers/gpu/drm/sti/sti_hda.c
@@ -600,8 +600,9 @@ static int sti_hda_connector_get_modes(struct drm_connector *connector)
#define CLK_TOLERANCE_HZ 50
-static int sti_hda_connector_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
+static enum drm_mode_status
+sti_hda_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
{
int target = mode->clock * 1000;
int target_min = target - CLK_TOLERANCE_HZ;
diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
index bb2a2868de2d..36bea1551ef8 100644
--- a/drivers/gpu/drm/sti/sti_hdmi.c
+++ b/drivers/gpu/drm/sti/sti_hdmi.c
@@ -1003,8 +1003,9 @@ static int sti_hdmi_connector_get_modes(struct drm_connector *connector)
#define CLK_TOLERANCE_HZ 50
-static int sti_hdmi_connector_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
+static enum drm_mode_status
+sti_hdmi_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
{
int target = mode->clock * 1000;
int target_min = target - CLK_TOLERANCE_HZ;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 681/731] orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (679 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 680/731] drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 682/731] orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init() Greg Kroah-Hartman
` (60 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Xiaoxu, Mike Marshall, Sasha Levin
From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[ Upstream commit d23417a5bf3a3afc55de5442eb46e1e60458b0a1 ]
When insert and remove the orangefs module, then debug_help_string will
be leaked:
unreferenced object 0xffff8881652ba000 (size 4096):
comm "insmod", pid 1701, jiffies 4294893639 (age 13218.530s)
hex dump (first 32 bytes):
43 6c 69 65 6e 74 20 44 65 62 75 67 20 4b 65 79 Client Debug Key
77 6f 72 64 73 20 61 72 65 20 75 6e 6b 6e 6f 77 words are unknow
backtrace:
[<0000000004e6f8e3>] kmalloc_trace+0x27/0xa0
[<0000000006f75d85>] orangefs_prepare_debugfs_help_string+0x5e/0x480 [orangefs]
[<0000000091270a2a>] _sub_I_65535_1+0x57/0xf70 [crc_itu_t]
[<000000004b1ee1a3>] do_one_initcall+0x87/0x2a0
[<000000001d0614ae>] do_init_module+0xdf/0x320
[<00000000efef068c>] load_module+0x2f98/0x3330
[<000000006533b44d>] __do_sys_finit_module+0x113/0x1b0
[<00000000a0da6f99>] do_syscall_64+0x35/0x80
[<000000007790b19b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
When remove the module, should always free debug_help_string. Should
always free the allocated buffer when change the free_debug_help_string.
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/orangefs/orangefs-debugfs.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/orangefs/orangefs-debugfs.c b/fs/orangefs/orangefs-debugfs.c
index 29eaa4544372..a848b6ef9599 100644
--- a/fs/orangefs/orangefs-debugfs.c
+++ b/fs/orangefs/orangefs-debugfs.c
@@ -222,6 +222,8 @@ static void orangefs_kernel_debug_init(void)
void orangefs_debugfs_cleanup(void)
{
debugfs_remove_recursive(debug_dir);
+ kfree(debug_help_string);
+ debug_help_string = NULL;
}
/* open ORANGEFS_KMOD_DEBUG_HELP_FILE */
@@ -671,6 +673,7 @@ int orangefs_prepare_debugfs_help_string(int at_boot)
memset(debug_help_string, 0, DEBUG_HELP_STRING_SIZE);
strlcat(debug_help_string, new, string_size);
mutex_unlock(&orangefs_help_file_lock);
+ kfree(new);
}
rc = 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 682/731] orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (680 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 681/731] orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 683/731] tools/include: Add _RET_IP_ and math definitions to kernel.h Greg Kroah-Hartman
` (59 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Xiaoxu, Mike Marshall, Sasha Levin
From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[ Upstream commit 31720a2b109b3080eb77e97b8f6f50a27b4ae599 ]
When insert and remove the orangefs module, there are memory leaked
as below:
unreferenced object 0xffff88816b0cc000 (size 2048):
comm "insmod", pid 783, jiffies 4294813439 (age 65.512s)
hex dump (first 32 bytes):
6e 6f 6e 65 0a 00 00 00 00 00 00 00 00 00 00 00 none............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000031ab7788>] kmalloc_trace+0x27/0xa0
[<000000005b405fee>] orangefs_debugfs_init.cold+0xaf/0x17f
[<00000000e5a0085b>] 0xffffffffa02780f9
[<000000004232d9f7>] do_one_initcall+0x87/0x2a0
[<0000000054f22384>] do_init_module+0xdf/0x320
[<000000003263bdea>] load_module+0x2f98/0x3330
[<0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0
[<00000000250ae02b>] do_syscall_64+0x35/0x80
[<00000000f11c03c7>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Use the golbal variable as the buffer rather than dynamic allocate to
slove the problem.
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/orangefs/orangefs-debugfs.c | 26 +++-----------------------
1 file changed, 3 insertions(+), 23 deletions(-)
diff --git a/fs/orangefs/orangefs-debugfs.c b/fs/orangefs/orangefs-debugfs.c
index a848b6ef9599..1b508f543384 100644
--- a/fs/orangefs/orangefs-debugfs.c
+++ b/fs/orangefs/orangefs-debugfs.c
@@ -194,15 +194,10 @@ void orangefs_debugfs_init(int debug_mask)
*/
static void orangefs_kernel_debug_init(void)
{
- int rc = -ENOMEM;
- char *k_buffer = NULL;
+ static char k_buffer[ORANGEFS_MAX_DEBUG_STRING_LEN] = { };
gossip_debug(GOSSIP_DEBUGFS_DEBUG, "%s: start\n", __func__);
- k_buffer = kzalloc(ORANGEFS_MAX_DEBUG_STRING_LEN, GFP_KERNEL);
- if (!k_buffer)
- goto out;
-
if (strlen(kernel_debug_string) + 1 < ORANGEFS_MAX_DEBUG_STRING_LEN) {
strcpy(k_buffer, kernel_debug_string);
strcat(k_buffer, "\n");
@@ -213,9 +208,6 @@ static void orangefs_kernel_debug_init(void)
debugfs_create_file(ORANGEFS_KMOD_DEBUG_FILE, 0444, debug_dir, k_buffer,
&kernel_debug_fops);
-
-out:
- gossip_debug(GOSSIP_DEBUGFS_DEBUG, "%s: rc:%d:\n", __func__, rc);
}
@@ -299,18 +291,13 @@ static int help_show(struct seq_file *m, void *v)
/*
* initialize the client-debug file.
*/
-static int orangefs_client_debug_init(void)
+static void orangefs_client_debug_init(void)
{
- int rc = -ENOMEM;
- char *c_buffer = NULL;
+ static char c_buffer[ORANGEFS_MAX_DEBUG_STRING_LEN] = { };
gossip_debug(GOSSIP_DEBUGFS_DEBUG, "%s: start\n", __func__);
- c_buffer = kzalloc(ORANGEFS_MAX_DEBUG_STRING_LEN, GFP_KERNEL);
- if (!c_buffer)
- goto out;
-
if (strlen(client_debug_string) + 1 < ORANGEFS_MAX_DEBUG_STRING_LEN) {
strcpy(c_buffer, client_debug_string);
strcat(c_buffer, "\n");
@@ -324,13 +311,6 @@ static int orangefs_client_debug_init(void)
debug_dir,
c_buffer,
&kernel_debug_fops);
-
- rc = 0;
-
-out:
-
- gossip_debug(GOSSIP_DEBUGFS_DEBUG, "%s: rc:%d:\n", __func__, rc);
- return rc;
}
/* open ORANGEFS_KMOD_DEBUG_FILE or ORANGEFS_CLIENT_DEBUG_FILE.*/
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 683/731] tools/include: Add _RET_IP_ and math definitions to kernel.h
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (681 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 682/731] orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 684/731] KVM: selftests: Fix build regression by using accessor function Greg Kroah-Hartman
` (58 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Karolina Drobnik, Mike Rapoport,
Tyler Hicks (Microsoft),
Sasha Levin
From: Karolina Drobnik <karolinadrobnik@gmail.com>
commit 5cf67a6051ea2558fd7c3d39c5a808db73073e9d upstream.
Add max_t, min_t and clamp functions, together with _RET_IP_
definition, so they can be used in testing.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/230fea382cb1e1659cdd52a55201854d38a0a149.1643796665.git.karolinadrobnik@gmail.com
[tyhicks: Backport around contextual differences due to the lack of v5.16 commit
d6e6a27d960f ("tools: Fix math.h breakage"). That commit fixed a commit
that was merged in v5.16-rc1 and, therefore, doesn't need to go back to
the stable branches.]
Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/include/linux/kernel.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/tools/include/linux/kernel.h b/tools/include/linux/kernel.h
index a7e54a08fb54..c2e109860fbc 100644
--- a/tools/include/linux/kernel.h
+++ b/tools/include/linux/kernel.h
@@ -14,6 +14,8 @@
#define UINT_MAX (~0U)
#endif
+#define _RET_IP_ ((unsigned long)__builtin_return_address(0))
+
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#define PERF_ALIGN(x, a) __PERF_ALIGN_MASK(x, (typeof(x))(a)-1)
@@ -52,6 +54,10 @@
_min1 < _min2 ? _min1 : _min2; })
#endif
+#define max_t(type, x, y) max((type)x, (type)y)
+#define min_t(type, x, y) min((type)x, (type)y)
+#define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
+
#ifndef roundup
#define roundup(x, y) ( \
{ \
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 684/731] KVM: selftests: Fix build regression by using accessor function
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (682 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 683/731] tools/include: Add _RET_IP_ and math definitions to kernel.h Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 685/731] hwmon: (jc42) Fix missing unlock on error in jc42_write() Greg Kroah-Hartman
` (57 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Tyler Hicks (Microsoft), Sasha Levin
From: Tyler Hicks <code@tyhicks.com>
Fix the stable backport of commit 05c2224d4b04 ("KVM: selftests: Fix
number of pages for memory slot in memslot_modification_stress_test"),
which caused memslot_modification_stress_test.c build failures due to
trying to access private members of struct kvm_vm.
v6.0 commit b530eba14c70 ("KVM: selftests: Get rid of
kvm_util_internal.h") and some other commits got rid of the accessors
and made all of the KVM data structures public. Keep using the accessors
in older kernels.
There is no corresponding upstream commit for this change.
Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/kvm/memslot_modification_stress_test.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/kvm/memslot_modification_stress_test.c b/tools/testing/selftests/kvm/memslot_modification_stress_test.c
index 1d806b8ffee2..766c1790df66 100644
--- a/tools/testing/selftests/kvm/memslot_modification_stress_test.c
+++ b/tools/testing/selftests/kvm/memslot_modification_stress_test.c
@@ -72,7 +72,7 @@ struct memslot_antagonist_args {
static void add_remove_memslot(struct kvm_vm *vm, useconds_t delay,
uint64_t nr_modifications)
{
- uint64_t pages = max_t(int, vm->page_size, getpagesize()) / vm->page_size;
+ uint64_t pages = max_t(int, vm_get_page_size(vm), getpagesize()) / vm_get_page_size(vm);
uint64_t gpa;
int i;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 685/731] hwmon: (jc42) Fix missing unlock on error in jc42_write()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (683 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 684/731] KVM: selftests: Fix build regression by using accessor function Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 686/731] ALSA/ASoC: hda: move/rename snd_hdac_ext_stop_streams to hdac_stream.c Greg Kroah-Hartman
` (56 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Martin Blumenstingl,
kernel test robot, Dan Carpenter, Guenter Roeck, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit b744db17abf6a2efc2bfa80870cc88e9799a8ccc ]
Add the missing unlock before return from function jc42_write()
in the error handling case.
Fixes: 37dedaee8bc6 ("hwmon: (jc42) Convert register access and caching to regmap/regcache")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221027062931.598247-1-yangyingliang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/jc42.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 5240bfdfcf2e..52f341d46029 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -340,7 +340,7 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL,
®val);
if (ret)
- return ret;
+ break;
/*
* JC42.4 compliant chips only support four hysteresis values.
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 686/731] ALSA/ASoC: hda: move/rename snd_hdac_ext_stop_streams to hdac_stream.c
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (684 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 685/731] hwmon: (jc42) Fix missing unlock on error in jc42_write() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 687/731] ALSA: hda: add snd_hdac_stop_streams() helper Greg Kroah-Hartman
` (55 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pierre-Louis Bossart, Kai Vehmanen,
Péter Ujfalusi, Ranjani Sridharan, Cezary Rojewski,
Takashi Iwai, Sasha Levin
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[ Upstream commit 12054f0ce8be7d2003ec068ab27c9eb608397b98 ]
snd_hdac_ext_stop_streams() has really nothing to do with the
extension, it just loops over the bus streams.
Move it to the hdac_stream layer and rename to remove the 'ext'
prefix and add the precision that the chip will also be stopped.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211216231128.344321-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 171107237246 ("ASoC: Intel: Skylake: Fix driver hang during shutdown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/sound/hdaudio.h | 1 +
include/sound/hdaudio_ext.h | 1 -
sound/hda/ext/hdac_ext_stream.c | 17 -----------------
sound/hda/hdac_stream.c | 16 ++++++++++++++++
sound/soc/intel/skylake/skl.c | 4 ++--
5 files changed, 19 insertions(+), 20 deletions(-)
diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h
index 22af68b01426..6a90ce405e60 100644
--- a/include/sound/hdaudio.h
+++ b/include/sound/hdaudio.h
@@ -558,6 +558,7 @@ int snd_hdac_stream_set_params(struct hdac_stream *azx_dev,
void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start);
void snd_hdac_stream_clear(struct hdac_stream *azx_dev);
void snd_hdac_stream_stop(struct hdac_stream *azx_dev);
+void snd_hdac_stop_streams_and_chip(struct hdac_bus *bus);
void snd_hdac_stream_reset(struct hdac_stream *azx_dev);
void snd_hdac_stream_sync_trigger(struct hdac_stream *azx_dev, bool set,
unsigned int streams, unsigned int reg);
diff --git a/include/sound/hdaudio_ext.h b/include/sound/hdaudio_ext.h
index d4e31ea16aba..56ea5cde5e63 100644
--- a/include/sound/hdaudio_ext.h
+++ b/include/sound/hdaudio_ext.h
@@ -92,7 +92,6 @@ void snd_hdac_ext_stream_decouple_locked(struct hdac_bus *bus,
struct hdac_ext_stream *azx_dev, bool decouple);
void snd_hdac_ext_stream_decouple(struct hdac_bus *bus,
struct hdac_ext_stream *azx_dev, bool decouple);
-void snd_hdac_ext_stop_streams(struct hdac_bus *bus);
int snd_hdac_ext_stream_set_spib(struct hdac_bus *bus,
struct hdac_ext_stream *stream, u32 value);
diff --git a/sound/hda/ext/hdac_ext_stream.c b/sound/hda/ext/hdac_ext_stream.c
index 37154ed43bd5..c09652da43ff 100644
--- a/sound/hda/ext/hdac_ext_stream.c
+++ b/sound/hda/ext/hdac_ext_stream.c
@@ -475,23 +475,6 @@ int snd_hdac_ext_stream_get_spbmaxfifo(struct hdac_bus *bus,
}
EXPORT_SYMBOL_GPL(snd_hdac_ext_stream_get_spbmaxfifo);
-
-/**
- * snd_hdac_ext_stop_streams - stop all stream if running
- * @bus: HD-audio core bus
- */
-void snd_hdac_ext_stop_streams(struct hdac_bus *bus)
-{
- struct hdac_stream *stream;
-
- if (bus->chip_init) {
- list_for_each_entry(stream, &bus->stream_list, list)
- snd_hdac_stream_stop(stream);
- snd_hdac_bus_stop_chip(bus);
- }
-}
-EXPORT_SYMBOL_GPL(snd_hdac_ext_stop_streams);
-
/**
* snd_hdac_ext_stream_drsm_enable - enable DMA resume for a stream
* @bus: HD-audio core bus
diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c
index aa7955fdf68a..f3582012d22f 100644
--- a/sound/hda/hdac_stream.c
+++ b/sound/hda/hdac_stream.c
@@ -142,6 +142,22 @@ void snd_hdac_stream_stop(struct hdac_stream *azx_dev)
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_stop);
+/**
+ * snd_hdac_stop_streams_and_chip - stop all streams and chip if running
+ * @bus: HD-audio core bus
+ */
+void snd_hdac_stop_streams_and_chip(struct hdac_bus *bus)
+{
+ struct hdac_stream *stream;
+
+ if (bus->chip_init) {
+ list_for_each_entry(stream, &bus->stream_list, list)
+ snd_hdac_stream_stop(stream);
+ snd_hdac_bus_stop_chip(bus);
+ }
+}
+EXPORT_SYMBOL_GPL(snd_hdac_stop_streams_and_chip);
+
/**
* snd_hdac_stream_reset - reset a stream
* @azx_dev: HD-audio core stream to reset
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index 5b1a15e39912..148ddf4cace0 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -439,7 +439,7 @@ static int skl_free(struct hdac_bus *bus)
skl->init_done = 0; /* to be sure */
- snd_hdac_ext_stop_streams(bus);
+ snd_hdac_stop_streams_and_chip(bus);
if (bus->irq >= 0)
free_irq(bus->irq, (void *)bus);
@@ -1096,7 +1096,7 @@ static void skl_shutdown(struct pci_dev *pci)
if (!skl->init_done)
return;
- snd_hdac_ext_stop_streams(bus);
+ snd_hdac_stop_streams_and_chip(bus);
list_for_each_entry(s, &bus->stream_list, list) {
stream = stream_to_hdac_ext_stream(s);
snd_hdac_ext_stream_decouple(bus, stream, false);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 687/731] ALSA: hda: add snd_hdac_stop_streams() helper
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (685 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 686/731] ALSA/ASoC: hda: move/rename snd_hdac_ext_stop_streams to hdac_stream.c Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 688/731] ASoC: Intel: Skylake: Fix driver hang during shutdown Greg Kroah-Hartman
` (54 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pierre-Louis Bossart, Bard Liao,
Péter Ujfalusi, Kai Vehmanen, Takashi Iwai, Sasha Levin
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[ Upstream commit 24ad3835a6db4f8857975effa6bf47730371a5ff ]
Minor code reuse, no functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 171107237246 ("ASoC: Intel: Skylake: Fix driver hang during shutdown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/sound/hdaudio.h | 1 +
sound/hda/hdac_stream.c | 17 ++++++++++++++---
sound/pci/hda/hda_controller.c | 4 +---
3 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h
index 6a90ce405e60..658fccdc8660 100644
--- a/include/sound/hdaudio.h
+++ b/include/sound/hdaudio.h
@@ -558,6 +558,7 @@ int snd_hdac_stream_set_params(struct hdac_stream *azx_dev,
void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start);
void snd_hdac_stream_clear(struct hdac_stream *azx_dev);
void snd_hdac_stream_stop(struct hdac_stream *azx_dev);
+void snd_hdac_stop_streams(struct hdac_bus *bus);
void snd_hdac_stop_streams_and_chip(struct hdac_bus *bus);
void snd_hdac_stream_reset(struct hdac_stream *azx_dev);
void snd_hdac_stream_sync_trigger(struct hdac_stream *azx_dev, bool set,
diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c
index f3582012d22f..eea22cf72aef 100644
--- a/sound/hda/hdac_stream.c
+++ b/sound/hda/hdac_stream.c
@@ -142,17 +142,28 @@ void snd_hdac_stream_stop(struct hdac_stream *azx_dev)
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_stop);
+/**
+ * snd_hdac_stop_streams - stop all streams
+ * @bus: HD-audio core bus
+ */
+void snd_hdac_stop_streams(struct hdac_bus *bus)
+{
+ struct hdac_stream *stream;
+
+ list_for_each_entry(stream, &bus->stream_list, list)
+ snd_hdac_stream_stop(stream);
+}
+EXPORT_SYMBOL_GPL(snd_hdac_stop_streams);
+
/**
* snd_hdac_stop_streams_and_chip - stop all streams and chip if running
* @bus: HD-audio core bus
*/
void snd_hdac_stop_streams_and_chip(struct hdac_bus *bus)
{
- struct hdac_stream *stream;
if (bus->chip_init) {
- list_for_each_entry(stream, &bus->stream_list, list)
- snd_hdac_stream_stop(stream);
+ snd_hdac_stop_streams(bus);
snd_hdac_bus_stop_chip(bus);
}
}
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index 75dcb14ff20a..0ff286b7b66b 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -1033,10 +1033,8 @@ EXPORT_SYMBOL_GPL(azx_init_chip);
void azx_stop_all_streams(struct azx *chip)
{
struct hdac_bus *bus = azx_bus(chip);
- struct hdac_stream *s;
- list_for_each_entry(s, &bus->stream_list, list)
- snd_hdac_stream_stop(s);
+ snd_hdac_stop_streams(bus);
}
EXPORT_SYMBOL_GPL(azx_stop_all_streams);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 688/731] ASoC: Intel: Skylake: Fix driver hang during shutdown
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (686 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 687/731] ALSA: hda: add snd_hdac_stop_streams() helper Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 689/731] ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe() Greg Kroah-Hartman
` (53 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Cezary Rojewski, Lukasz Majczak,
Mark Brown, Sasha Levin
From: Cezary Rojewski <cezary.rojewski@intel.com>
[ Upstream commit 171107237246d66bce04f3769d33648f896b4ce3 ]
AudioDSP cores and HDAudio links need to be turned off on shutdown to
ensure no communication or data transfer occurs during the procedure.
Fixes: c5a76a246989 ("ASoC: Intel: Skylake: Add shutdown callback")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/intel/skylake/skl.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index 148ddf4cace0..46bb3b8bd5af 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -1096,7 +1096,10 @@ static void skl_shutdown(struct pci_dev *pci)
if (!skl->init_done)
return;
- snd_hdac_stop_streams_and_chip(bus);
+ snd_hdac_stop_streams(bus);
+ snd_hdac_ext_bus_link_power_down_all(bus);
+ skl_dsp_sleep(skl->dsp);
+
list_for_each_entry(s, &bus->stream_list, list) {
stream = stream_to_hdac_ext_stream(s);
snd_hdac_ext_stream_decouple(bus, stream, false);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 689/731] ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (687 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 688/731] ASoC: Intel: Skylake: Fix driver hang during shutdown Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 690/731] ASoC: audio-graph-card: fix refcount leak of cpu_ep in __graph_for_each_link() Greg Kroah-Hartman
` (52 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Wang Yufen, Mark Brown, Sasha Levin
From: Wang Yufen <wangyufen@huawei.com>
[ Upstream commit 3327d721114c109ba0575f86f8fda3b525404054 ]
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8173_rt5650_rt5514_dev_probe().
Fixes: 0d1d7a664288 ("ASoC: mediatek: Refine mt8173 driver and change config option")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1670234664-24246-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
index 390da5bf727e..9421b919d462 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
@@ -200,14 +200,16 @@ static int mt8173_rt5650_rt5514_dev_probe(struct platform_device *pdev)
if (!mt8173_rt5650_rt5514_dais[DAI_LINK_CODEC_I2S].codecs[0].of_node) {
dev_err(&pdev->dev,
"Property 'audio-codec' missing or invalid\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
mt8173_rt5650_rt5514_dais[DAI_LINK_CODEC_I2S].codecs[1].of_node =
of_parse_phandle(pdev->dev.of_node, "mediatek,audio-codec", 1);
if (!mt8173_rt5650_rt5514_dais[DAI_LINK_CODEC_I2S].codecs[1].of_node) {
dev_err(&pdev->dev,
"Property 'audio-codec' missing or invalid\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
mt8173_rt5650_rt5514_codec_conf[0].dlc.of_node =
mt8173_rt5650_rt5514_dais[DAI_LINK_CODEC_I2S].codecs[1].of_node;
@@ -219,6 +221,7 @@ static int mt8173_rt5650_rt5514_dev_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
+out:
of_node_put(platform_node);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 690/731] ASoC: audio-graph-card: fix refcount leak of cpu_ep in __graph_for_each_link()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (688 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 689/731] ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 691/731] ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume() Greg Kroah-Hartman
` (51 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wang Yufen, Kuninori Morimoto,
Mark Brown, Sasha Levin
From: Wang Yufen <wangyufen@huawei.com>
[ Upstream commit 8ab2d12c726f0fde0692fa5d81d8019b3dcd62d0 ]
The of_get_next_child() returns a node with refcount incremented, and
decrements the refcount of prev. So in the error path of the while loop,
of_node_put() needs be called for cpu_ep.
Fixes: fce9b90c1ab7 ("ASoC: audio-graph-card: cleanup DAI link loop method - step2")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1670228127-13835-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/generic/audio-graph-card.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c
index 28cbcdb56857..89814f68ff56 100644
--- a/sound/soc/generic/audio-graph-card.c
+++ b/sound/soc/generic/audio-graph-card.c
@@ -483,8 +483,10 @@ static int __graph_for_each_link(struct asoc_simple_priv *priv,
of_node_put(codec_ep);
of_node_put(codec_port);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(cpu_ep);
return ret;
+ }
codec_port_old = codec_port;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 691/731] ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (689 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 690/731] ASoC: audio-graph-card: fix refcount leak of cpu_ep in __graph_for_each_link() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 692/731] ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe() Greg Kroah-Hartman
` (50 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Wang Jingjin, Mark Brown, Sasha Levin
From: Wang Jingjin <wangjingjin1@huawei.com>
[ Upstream commit ef0a098efb36660326c133af9b5a04a96a00e3ca ]
The clk_disable_unprepare() should be called in the error handling of
rockchip_pdm_runtime_resume().
Fixes: fc05a5b22253 ("ASoC: rockchip: add support for pdm controller")
Signed-off-by: Wang Jingjin <wangjingjin1@huawei.com>
Link: https://lore.kernel.org/r/20221205032802.2422983-1-wangjingjin1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/rockchip/rockchip_pdm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/rockchip/rockchip_pdm.c b/sound/soc/rockchip/rockchip_pdm.c
index 38bd603eeb45..7c0b0fe326c2 100644
--- a/sound/soc/rockchip/rockchip_pdm.c
+++ b/sound/soc/rockchip/rockchip_pdm.c
@@ -368,6 +368,7 @@ static int rockchip_pdm_runtime_resume(struct device *dev)
ret = clk_prepare_enable(pdm->hclk);
if (ret) {
+ clk_disable_unprepare(pdm->clk);
dev_err(pdm->dev, "hclock enable failed %d\n", ret);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 692/731] ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (690 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 691/731] ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 693/731] ASoC: wm8994: Fix potential deadlock Greg Kroah-Hartman
` (49 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Wang Yufen, Mark Brown, Sasha Levin
From: Wang Yufen <wangyufen@huawei.com>
[ Upstream commit 38eef3be38ab895959c442702864212cc3beb96c ]
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8183_mt6358_ts3a227_max98357_dev_probe().
Fixes: 11c0269017b2 ("ASoC: Mediatek: MT8183: Add machine driver with TS3A227")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1670234188-23596-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
index a56c1e87d564..4dab1ee69ec0 100644
--- a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
@@ -647,8 +647,10 @@ mt8183_mt6358_ts3a227_max98357_dev_probe(struct platform_device *pdev)
}
card = (struct snd_soc_card *)of_device_get_match_data(&pdev->dev);
- if (!card)
+ if (!card) {
+ of_node_put(platform_node);
return -EINVAL;
+ }
card->dev = &pdev->dev;
ec_codec = of_parse_phandle(pdev->dev.of_node, "mediatek,ec-codec", 0);
@@ -737,8 +739,10 @@ mt8183_mt6358_ts3a227_max98357_dev_probe(struct platform_device *pdev)
}
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
+ if (!priv) {
+ ret = -ENOMEM;
+ goto out;
+ }
snd_soc_card_set_drvdata(card, priv);
@@ -746,7 +750,8 @@ mt8183_mt6358_ts3a227_max98357_dev_probe(struct platform_device *pdev)
if (IS_ERR(priv->pinctrl)) {
dev_err(&pdev->dev, "%s devm_pinctrl_get failed\n",
__func__);
- return PTR_ERR(priv->pinctrl);
+ ret = PTR_ERR(priv->pinctrl);
+ goto out;
}
for (i = 0; i < PIN_STATE_MAX; i++) {
@@ -779,6 +784,7 @@ mt8183_mt6358_ts3a227_max98357_dev_probe(struct platform_device *pdev)
ret = devm_snd_soc_register_card(&pdev->dev, card);
+out:
of_node_put(platform_node);
of_node_put(ec_codec);
of_node_put(hdmi_codec);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 693/731] ASoC: wm8994: Fix potential deadlock
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (691 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 692/731] ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 694/731] ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume() Greg Kroah-Hartman
` (48 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marek Szyprowski, Charles Keepax,
Mark Brown, Sasha Levin
From: Marek Szyprowski <m.szyprowski@samsung.com>
[ Upstream commit 9529dc167ffcdfd201b9f0eda71015f174095f7e ]
Fix this by dropping wm8994->accdet_lock while calling
cancel_delayed_work_sync(&wm8994->mic_work) in wm1811_jackdet_irq().
Fixes: c0cc3f166525 ("ASoC: wm8994: Allow a delay between jack insertion and microphone detect")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221209091657.1183-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/wm8994.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index f117ec0c489f..6759db92f6c4 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -3853,7 +3853,12 @@ static irqreturn_t wm1811_jackdet_irq(int irq, void *data)
} else {
dev_dbg(component->dev, "Jack not detected\n");
+ /* Release wm8994->accdet_lock to avoid deadlock:
+ * cancel_delayed_work_sync() takes wm8994->mic_work internal
+ * lock and wm1811_mic_work takes wm8994->accdet_lock */
+ mutex_unlock(&wm8994->accdet_lock);
cancel_delayed_work_sync(&wm8994->mic_work);
+ mutex_lock(&wm8994->accdet_lock);
snd_soc_component_update_bits(component, WM8958_MICBIAS2,
WM8958_MICB2_DISCH, WM8958_MICB2_DISCH);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 694/731] ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (692 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 693/731] ASoC: wm8994: Fix potential deadlock Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 695/731] ASoC: rt5670: Remove unbalanced pm_runtime_put() Greg Kroah-Hartman
` (47 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Wang Jingjin, Mark Brown, Sasha Levin
From: Wang Jingjin <wangjingjin1@huawei.com>
[ Upstream commit 6d94d0090527b1763872275a7ccd44df7219b31e ]
rk_spdif_runtime_resume() may have called clk_prepare_enable() before return
from failed branches, add missing clk_disable_unprepare() in this case.
Fixes: f874b80e1571 ("ASoC: rockchip: Add rockchip SPDIF transceiver driver")
Signed-off-by: Wang Jingjin <wangjingjin1@huawei.com>
Link: https://lore.kernel.org/r/20221208063900.4180790-1-wangjingjin1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/rockchip/rockchip_spdif.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/rockchip/rockchip_spdif.c b/sound/soc/rockchip/rockchip_spdif.c
index d027ca4b1796..09a25d84fee6 100644
--- a/sound/soc/rockchip/rockchip_spdif.c
+++ b/sound/soc/rockchip/rockchip_spdif.c
@@ -88,6 +88,7 @@ static int __maybe_unused rk_spdif_runtime_resume(struct device *dev)
ret = clk_prepare_enable(spdif->hclk);
if (ret) {
+ clk_disable_unprepare(spdif->mclk);
dev_err(spdif->dev, "hclk clock enable failed %d\n", ret);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 695/731] ASoC: rt5670: Remove unbalanced pm_runtime_put()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (693 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 694/731] ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 696/731] drm/i915/display: Dont disable DDI/Transcoder when setting phy test pattern Greg Kroah-Hartman
` (46 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hans de Goede, Mark Brown, Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit 6c900dcc3f7331a67ed29739d74524e428d137fb ]
For some reason rt5670_i2c_probe() does a pm_runtime_put() at the end
of a successful probe. But it has never done a pm_runtime_get() leading
to the following error being logged into dmesg:
rt5670 i2c-10EC5640:00: Runtime PM usage count underflow!
Fix this by removing the unnecessary pm_runtime_put().
Fixes: 64e89e5f5548 ("ASoC: rt5670: Add runtime PM support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221213123319.11285-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/rt5670.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c
index ecbaf129a6e3..51b385575a5c 100644
--- a/sound/soc/codecs/rt5670.c
+++ b/sound/soc/codecs/rt5670.c
@@ -3313,8 +3313,6 @@ static int rt5670_i2c_probe(struct i2c_client *i2c,
if (ret < 0)
goto err;
- pm_runtime_put(&i2c->dev);
-
return 0;
err:
pm_runtime_disable(&i2c->dev);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 696/731] drm/i915/display: Dont disable DDI/Transcoder when setting phy test pattern
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (694 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 695/731] ASoC: rt5670: Remove unbalanced pm_runtime_put() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 697/731] LoadPin: Ignore the "contents" argument of the LSM hooks Greg Kroah-Hartman
` (45 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Imre Deak, Clint Taylor,
Jani Nikula, Khaled Almahallawy, Rodrigo Vivi, Sasha Levin
From: Khaled Almahallawy <khaled.almahallawy@intel.com>
[ Upstream commit 3153eebb7a76e663ac76d6670dc113296de96622 ]
Bspecs has updated recently to remove the restriction to disable
DDI/Transcoder before setting PHY test pattern. This update is to
address PHY compliance test failures observed on a port with LTTPR.
The issue is that when Transc. is disabled, the main link signals fed
to LTTPR will be dropped invalidating link training, which will affect
the quality of the phy test pattern when the transcoder is enabled again.
v2: Update commit message (Clint)
v3: Add missing Signed-off in v2
v4: Update Bspec and commit message for pre-gen12 (Jani)
Bspec: 50482, 7555
Fixes: 8cdf72711928 ("drm/i915/dp: Program vswing, pre-emphasis, test-pattern")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
CC: Jani Nikula <jani.nikula@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123220926.170034-1-khaled.almahallawy@intel.com
(cherry picked from commit be4a847652056b067d6dc6fe0fc024a9e2e987ca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/i915/display/intel_dp.c | 59 -------------------------
1 file changed, 59 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 1ccdf2da042b..64a15b636e8d 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -3245,61 +3245,6 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp,
}
}
-static void
-intel_dp_autotest_phy_ddi_disable(struct intel_dp *intel_dp,
- const struct intel_crtc_state *crtc_state)
-{
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
- enum pipe pipe = crtc->pipe;
- u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
-
- trans_ddi_func_ctl_value = intel_de_read(dev_priv,
- TRANS_DDI_FUNC_CTL(pipe));
- trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
- dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
-
- trans_ddi_func_ctl_value &= ~(TRANS_DDI_FUNC_ENABLE |
- TGL_TRANS_DDI_PORT_MASK);
- trans_conf_value &= ~PIPECONF_ENABLE;
- dp_tp_ctl_value &= ~DP_TP_CTL_ENABLE;
-
- intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
- intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
- trans_ddi_func_ctl_value);
- intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
-}
-
-static void
-intel_dp_autotest_phy_ddi_enable(struct intel_dp *intel_dp,
- const struct intel_crtc_state *crtc_state)
-{
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
- enum port port = dig_port->base.port;
- struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
- enum pipe pipe = crtc->pipe;
- u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
-
- trans_ddi_func_ctl_value = intel_de_read(dev_priv,
- TRANS_DDI_FUNC_CTL(pipe));
- trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
- dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
-
- trans_ddi_func_ctl_value |= TRANS_DDI_FUNC_ENABLE |
- TGL_TRANS_DDI_SELECT_PORT(port);
- trans_conf_value |= PIPECONF_ENABLE;
- dp_tp_ctl_value |= DP_TP_CTL_ENABLE;
-
- intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
- intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
- intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
- trans_ddi_func_ctl_value);
-}
-
static void intel_dp_process_phy_request(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
@@ -3317,14 +3262,10 @@ static void intel_dp_process_phy_request(struct intel_dp *intel_dp,
intel_dp_get_adjust_train(intel_dp, crtc_state, DP_PHY_DPRX,
link_status);
- intel_dp_autotest_phy_ddi_disable(intel_dp, crtc_state);
-
intel_dp_set_signal_levels(intel_dp, crtc_state, DP_PHY_DPRX);
intel_dp_phy_pattern_update(intel_dp, crtc_state);
- intel_dp_autotest_phy_ddi_enable(intel_dp, crtc_state);
-
drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET,
intel_dp->train_set, crtc_state->lane_count);
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 697/731] LoadPin: Ignore the "contents" argument of the LSM hooks
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (695 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 696/731] drm/i915/display: Dont disable DDI/Transcoder when setting phy test pattern Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 698/731] pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion Greg Kroah-Hartman
` (44 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paul Moore, James Morris,
Serge E. Hallyn, linux-security-module, Kees Cook, Ping-Ke Shih,
Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit 1a17e5b513ceebf21100027745b8731b4728edf7 ]
LoadPin only enforces the read-only origin of kernel file reads. Whether
or not it was a partial read isn't important. Remove the overly
conservative checks so that things like partial firmware reads will
succeed (i.e. reading a firmware header).
Fixes: 2039bda1fa8d ("LSM: Add "contents" flag to kernel_read_file hook")
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Tested-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20221209195453.never.494-kees@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/loadpin/loadpin.c | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/security/loadpin/loadpin.c b/security/loadpin/loadpin.c
index b12f7d986b1e..5fce105a372d 100644
--- a/security/loadpin/loadpin.c
+++ b/security/loadpin/loadpin.c
@@ -118,21 +118,11 @@ static void loadpin_sb_free_security(struct super_block *mnt_sb)
}
}
-static int loadpin_read_file(struct file *file, enum kernel_read_file_id id,
- bool contents)
+static int loadpin_check(struct file *file, enum kernel_read_file_id id)
{
struct super_block *load_root;
const char *origin = kernel_read_file_id_str(id);
- /*
- * If we will not know that we'll be seeing the full contents
- * then we cannot trust a load will be complete and unchanged
- * off disk. Treat all contents=false hooks as if there were
- * no associated file struct.
- */
- if (!contents)
- file = NULL;
-
/* If the file id is excluded, ignore the pinning. */
if ((unsigned int)id < ARRAY_SIZE(ignore_read_file_id) &&
ignore_read_file_id[id]) {
@@ -187,9 +177,25 @@ static int loadpin_read_file(struct file *file, enum kernel_read_file_id id,
return 0;
}
+static int loadpin_read_file(struct file *file, enum kernel_read_file_id id,
+ bool contents)
+{
+ /*
+ * LoadPin only cares about the _origin_ of a file, not its
+ * contents, so we can ignore the "are full contents available"
+ * argument here.
+ */
+ return loadpin_check(file, id);
+}
+
static int loadpin_load_data(enum kernel_load_data_id id, bool contents)
{
- return loadpin_read_file(NULL, (enum kernel_read_file_id) id, contents);
+ /*
+ * LoadPin only cares about the _origin_ of a file, not its
+ * contents, so a NULL file is passed, and we can ignore the
+ * state of "contents".
+ */
+ return loadpin_check(NULL, (enum kernel_read_file_id) id);
}
static struct security_hook_list loadpin_hooks[] __lsm_ro_after_init = {
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 698/731] pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (696 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 697/731] LoadPin: Ignore the "contents" argument of the LSM hooks Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 699/731] perf debug: Set debug_peo_args and redirect_to_stderr variable to correct values in perf_quiet_option() Greg Kroah-Hartman
` (43 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wei Wang, Midas Chien,
Connor OBrien, Kees Cook, Anton Vorontsov, Colin Cross,
Tony Luck, kernel-team, John Stultz, Sasha Levin
From: John Stultz <jstultz@google.com>
[ Upstream commit 76d62f24db07f22ccf9bc18ca793c27d4ebef721 ]
Wei Wang reported seeing priority inversion caused latencies
caused by contention on pmsg_lock, and suggested it be switched
to a rt_mutex.
I was initially hesitant this would help, as the tasks in that
trace all seemed to be SCHED_NORMAL, so the benefit would be
limited to only nice boosting.
However, another similar issue was raised where the priority
inversion was seen did involve a blocked RT task so it is clear
this would be helpful in that case.
Cc: Wei Wang <wvw@google.com>
Cc: Midas Chien<midaschieh@google.com>
Cc: Connor O'Brien <connoro@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: kernel-team@android.com
Fixes: 9d5438f462ab ("pstore: Add pmsg - user-space accessible pstore object")
Reported-by: Wei Wang <wvw@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221214231834.3711880-1-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/pstore/pmsg.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/fs/pstore/pmsg.c b/fs/pstore/pmsg.c
index d8542ec2f38c..18cf94b597e0 100644
--- a/fs/pstore/pmsg.c
+++ b/fs/pstore/pmsg.c
@@ -7,9 +7,10 @@
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
+#include <linux/rtmutex.h>
#include "internal.h"
-static DEFINE_MUTEX(pmsg_lock);
+static DEFINE_RT_MUTEX(pmsg_lock);
static ssize_t write_pmsg(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
@@ -28,9 +29,9 @@ static ssize_t write_pmsg(struct file *file, const char __user *buf,
if (!access_ok(buf, count))
return -EFAULT;
- mutex_lock(&pmsg_lock);
+ rt_mutex_lock(&pmsg_lock);
ret = psinfo->write_user(&record, buf);
- mutex_unlock(&pmsg_lock);
+ rt_mutex_unlock(&pmsg_lock);
return ret ? ret : count;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 699/731] perf debug: Set debug_peo_args and redirect_to_stderr variable to correct values in perf_quiet_option()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (697 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 698/731] pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 700/731] afs: Fix lost servers_outstanding count Greg Kroah-Hartman
` (42 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Adrian Hunter, Yang Jihong,
Alexander Shishkin, Andi Kleen, Carsten Haitzler, Ian Rogers,
Ingo Molnar, Jiri Olsa, Leo Yan, Mark Rutland, martin.lau,
Masami Hiramatsu, Namhyung Kim, Peter Zijlstra, Ravi Bangoria,
Ravi Bangoria, Arnaldo Carvalho de Melo, Sasha Levin
From: Yang Jihong <yangjihong1@huawei.com>
[ Upstream commit 188ac720d364035008a54d249cf47b4cc100f819 ]
When perf uses quiet mode, perf_quiet_option() sets the 'debug_peo_args'
variable to -1, and display_attr() incorrectly determines the value of
'debug_peo_args'. As a result, unexpected information is displayed.
Before:
# perf record --quiet -- ls > /dev/null
------------------------------------------------------------
perf_event_attr:
size 128
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID|LOST
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
...
After:
# perf record --quiet -- ls > /dev/null
#
redirect_to_stderr is a similar problem.
Fixes: f78eaef0e0493f60 ("perf tools: Allow to force redirect pr_debug to stderr.")
Fixes: ccd26741f5e6bdf2 ("perf tool: Provide an option to print perf_event_open args and return value")
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: martin.lau@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/20221220035702.188413-2-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/util/debug.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
index 65e6c22f38e4..190e818a0717 100644
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -241,6 +241,10 @@ int perf_quiet_option(void)
opt++;
}
+ /* For debug variables that are used as bool types, set to 0. */
+ redirect_to_stderr = 0;
+ debug_peo_args = 0;
+
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 700/731] afs: Fix lost servers_outstanding count
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (698 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 699/731] perf debug: Set debug_peo_args and redirect_to_stderr variable to correct values in perf_quiet_option() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 701/731] pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES Greg Kroah-Hartman
` (41 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marc Dionne, David Howells,
linux-afs, Sasha Levin
From: David Howells <dhowells@redhat.com>
[ Upstream commit 36f82c93ee0bd88f1c95a52537906b8178b537f1 ]
The afs_fs_probe_dispatcher() work function is passed a count on
net->servers_outstanding when it is scheduled (which may come via its
timer). This is passed back to the work_item, passed to the timer or
dropped at the end of the dispatcher function.
But, at the top of the dispatcher function, there are two checks which
skip the rest of the function: if the network namespace is being destroyed
or if there are no fileservers to probe. These two return paths, however,
do not drop the count passed to the dispatcher, and so, sometimes, the
destruction of a network namespace, such as induced by rmmod of the kafs
module, may get stuck in afs_purge_servers(), waiting for
net->servers_outstanding to become zero.
Fix this by adding the missing decrements in afs_fs_probe_dispatcher().
Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/167164544917.2072364.3759519569649459359.stgit@warthog.procyon.org.uk/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/afs/fs_probe.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/afs/fs_probe.c b/fs/afs/fs_probe.c
index 3ac5fcf98d0d..daaf3810cc92 100644
--- a/fs/afs/fs_probe.c
+++ b/fs/afs/fs_probe.c
@@ -366,12 +366,15 @@ void afs_fs_probe_dispatcher(struct work_struct *work)
unsigned long nowj, timer_at, poll_at;
bool first_pass = true, set_timer = false;
- if (!net->live)
+ if (!net->live) {
+ afs_dec_servers_outstanding(net);
return;
+ }
_enter("");
if (list_empty(&net->fs_probe_fast) && list_empty(&net->fs_probe_slow)) {
+ afs_dec_servers_outstanding(net);
_leave(" [none]");
return;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 701/731] pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (699 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 700/731] afs: Fix lost servers_outstanding count Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 702/731] ima: Simplify ima_lsm_copy_rule Greg Kroah-Hartman
` (40 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wei Wang, Midas Chien,
Connor OBrien, Kees Cook, Anton Vorontsov, Colin Cross,
Tony Luck, kernel test robot, kernel-team, John Stultz,
Sasha Levin
From: John Stultz <jstultz@google.com>
[ Upstream commit 2f4fec5943407318b9523f01ce1f5d668c028332 ]
In commit 76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex
to avoid priority inversion") I changed a lock to an rt_mutex.
However, its possible that CONFIG_RT_MUTEXES is not enabled,
which then results in a build failure, as the 0day bot detected:
https://lore.kernel.org/linux-mm/202212211244.TwzWZD3H-lkp@intel.com/
Thus this patch changes CONFIG_PSTORE_PMSG to select
CONFIG_RT_MUTEXES, which ensures the build will not fail.
Cc: Wei Wang <wvw@google.com>
Cc: Midas Chien<midaschieh@google.com>
Cc: Connor O'Brien <connoro@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: kernel test robot <lkp@intel.com>
Cc: kernel-team@android.com
Fixes: 76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221221051855.15761-1-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/pstore/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/pstore/Kconfig b/fs/pstore/Kconfig
index 8adabde685f1..c49d554cc9ae 100644
--- a/fs/pstore/Kconfig
+++ b/fs/pstore/Kconfig
@@ -126,6 +126,7 @@ config PSTORE_CONSOLE
config PSTORE_PMSG
bool "Log user space messages"
depends on PSTORE
+ select RT_MUTEXES
help
When the option is enabled, pstore will export a character
interface /dev/pmsg0 to log user space messages. On reboot
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 702/731] ima: Simplify ima_lsm_copy_rule
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (700 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 701/731] pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 703/731] ALSA: usb-audio: add the quirk for KT0206 device Greg Kroah-Hartman
` (39 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, GUO Zihua, Roberto Sassu,
Mimi Zohar, Sasha Levin
From: GUO Zihua <guozihua@huawei.com>
[ Upstream commit d57378d3aa4d864d9e590482602068af1b20c0c5 ]
Currently ima_lsm_copy_rule() set the arg_p field of the source rule to
NULL, so that the source rule could be freed afterward. It does not make
sense for this behavior to be inside a "copy" function. So move it
outside and let the caller handle this field.
ima_lsm_copy_rule() now produce a shallow copy of the original entry
including args_p field. Meaning only the lsm.rule and the rule itself
should be freed for the original rule. Thus, instead of calling
ima_lsm_free_rule() which frees lsm.rule as well as args_p field, free
the lsm.rule directly.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/integrity/ima/ima_policy.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c
index 844d69f6ac00..ed43d30682ff 100644
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -391,12 +391,6 @@ static struct ima_rule_entry *ima_lsm_copy_rule(struct ima_rule_entry *entry)
nentry->lsm[i].type = entry->lsm[i].type;
nentry->lsm[i].args_p = entry->lsm[i].args_p;
- /*
- * Remove the reference from entry so that the associated
- * memory will not be freed during a later call to
- * ima_lsm_free_rule(entry).
- */
- entry->lsm[i].args_p = NULL;
ima_filter_rule_init(nentry->lsm[i].type, Audit_equal,
nentry->lsm[i].args_p,
@@ -410,6 +404,7 @@ static struct ima_rule_entry *ima_lsm_copy_rule(struct ima_rule_entry *entry)
static int ima_lsm_update_rule(struct ima_rule_entry *entry)
{
+ int i;
struct ima_rule_entry *nentry;
nentry = ima_lsm_copy_rule(entry);
@@ -424,7 +419,8 @@ static int ima_lsm_update_rule(struct ima_rule_entry *entry)
* references and the entry itself. All other memory refrences will now
* be owned by nentry.
*/
- ima_lsm_free_rule(entry);
+ for (i = 0; i < MAX_LSM_RULES; i++)
+ ima_filter_rule_free(entry->lsm[i].rule);
kfree(entry);
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 763+ messages in thread
* [PATCH 5.15 703/731] ALSA: usb-audio: add the quirk for KT0206 device
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (701 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 702/731] ima: Simplify ima_lsm_copy_rule Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 704/731] ALSA: hda/realtek: Add quirk for Lenovo TianYi510Pro-14IOB Greg Kroah-Hartman
` (38 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, wangdicheng, Takashi Iwai
From: wangdicheng <wangdicheng@kylinos.cn>
commit 696b66ac26ef953aed5783ef26a252ec8f207013 upstream.
Add relevant information to the quirks-table.h file.
The test passes and the sound source file plays normally.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/SG2PR02MB587849631CB96809CF90DBED8A1A9@SG2PR02MB5878.apcprd02.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/quirks-table.h | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -76,6 +76,8 @@
{ USB_DEVICE_VENDOR_SPEC(0x041e, 0x3f0a) },
/* E-Mu 0204 USB */
{ USB_DEVICE_VENDOR_SPEC(0x041e, 0x3f19) },
+/* Ktmicro Usb_audio device */
+{ USB_DEVICE_VENDOR_SPEC(0x31b2, 0x0011) },
/*
* Creative Technology, Ltd Live! Cam Sync HD [VF0770]
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 704/731] ALSA: hda/realtek: Add quirk for Lenovo TianYi510Pro-14IOB
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (702 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 703/731] ALSA: usb-audio: add the quirk for KT0206 device Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 705/731] ALSA: hda/hdmi: Add HP Device 0x8711 to force connect list Greg Kroah-Hartman
` (37 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Edward Pacman, Takashi Iwai
From: Edward Pacman <edward@edward-p.xyz>
commit 4bf5bf54476dffe60e6b6d8d539f67309ff599e2 upstream.
Lenovo TianYi510Pro-14IOB (17aa:3742)
require quirk for enabling headset-mic
Signed-off-by: Edward Pacman <edward@edward-p.xyz>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216756
Link: https://lore.kernel.org/r/20221207133218.18989-1-edward@edward-p.xyz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10593,6 +10593,17 @@ static void alc897_fixup_lenovo_headset_
}
}
+static void alc897_fixup_lenovo_headset_mode(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ struct alc_spec *spec = codec->spec;
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ spec->parse_flags |= HDA_PINCFG_HEADSET_MIC;
+ spec->gen.hp_automute_hook = alc897_hp_automute_hook;
+ }
+}
+
static const struct coef_fw alc668_coefs[] = {
WRITE_COEF(0x01, 0xbebe), WRITE_COEF(0x02, 0xaaaa), WRITE_COEF(0x03, 0x0),
WRITE_COEF(0x04, 0x0180), WRITE_COEF(0x06, 0x0), WRITE_COEF(0x07, 0x0f80),
@@ -10676,6 +10687,8 @@ enum {
ALC897_FIXUP_LENOVO_HEADSET_MIC,
ALC897_FIXUP_HEADSET_MIC_PIN,
ALC897_FIXUP_HP_HSMIC_VERB,
+ ALC897_FIXUP_LENOVO_HEADSET_MODE,
+ ALC897_FIXUP_HEADSET_MIC_PIN2,
};
static const struct hda_fixup alc662_fixups[] = {
@@ -11102,6 +11115,19 @@ static const struct hda_fixup alc662_fix
{ }
},
},
+ [ALC897_FIXUP_LENOVO_HEADSET_MODE] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc897_fixup_lenovo_headset_mode,
+ },
+ [ALC897_FIXUP_HEADSET_MIC_PIN2] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x1a, 0x01a11140 }, /* use as headset mic, without its own jack detect */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC897_FIXUP_LENOVO_HEADSET_MODE
+ },
};
static const struct snd_pci_quirk alc662_fixup_tbl[] = {
@@ -11154,6 +11180,7 @@ static const struct snd_pci_quirk alc662
SND_PCI_QUIRK(0x17aa, 0x32cb, "Lenovo ThinkCentre M70", ALC897_FIXUP_HEADSET_MIC_PIN),
SND_PCI_QUIRK(0x17aa, 0x32cf, "Lenovo ThinkCentre M950", ALC897_FIXUP_HEADSET_MIC_PIN),
SND_PCI_QUIRK(0x17aa, 0x32f7, "Lenovo ThinkCentre M90", ALC897_FIXUP_HEADSET_MIC_PIN),
+ SND_PCI_QUIRK(0x17aa, 0x3742, "Lenovo TianYi510Pro-14IOB", ALC897_FIXUP_HEADSET_MIC_PIN2),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x1849, 0x5892, "ASRock B150M", ALC892_FIXUP_ASROCK_MOBO),
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 705/731] ALSA: hda/hdmi: Add HP Device 0x8711 to force connect list
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (703 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 704/731] ALSA: hda/realtek: Add quirk for Lenovo TianYi510Pro-14IOB Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 706/731] usb: cdnsp: fix lack of ZLP for ep0 Greg Kroah-Hartman
` (36 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jiao Zhou, Takashi Iwai
From: Jiao Zhou <jiaozhou@google.com>
commit 31b573946ea55e1ea0e08ae8e83bcf879b30f83a upstream.
HDMI audio is not working on the HP EliteDesk 800 G6 because the pin is
unconnected. This issue can be resolved by using the 'hdajackretask'
tool to override the unconnected pin to force it to connect.
Signed-off-by: Jiao Zhou <jiaozhou@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221206185311.3669950-1-jiaozhou@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_hdmi.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1962,6 +1962,7 @@ static int hdmi_add_cvt(struct hda_codec
static const struct snd_pci_quirk force_connect_list[] = {
SND_PCI_QUIRK(0x103c, 0x870f, "HP", 1),
SND_PCI_QUIRK(0x103c, 0x871a, "HP", 1),
+ SND_PCI_QUIRK(0x103c, 0x8711, "HP", 1),
SND_PCI_QUIRK(0x1462, 0xec94, "MS-7C94", 1),
SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", 1),
{}
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 706/731] usb: cdnsp: fix lack of ZLP for ep0
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (704 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 705/731] ALSA: hda/hdmi: Add HP Device 0x8711 to force connect list Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 707/731] usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq Greg Kroah-Hartman
` (35 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Peter Chen, Pawel Laszczak
From: Pawel Laszczak <pawell@cadence.com>
commit ae423ef5d095e09970f52c08020fdbf7f9d87c22 upstream.
Patch implements the handling of ZLP for control transfer.
To send the ZLP driver must prepare the extra TRB in TD with
length set to zero and TRB type to TRB_NORMAL.
The first TRB must have set TRB_CHAIN flag, TD_SIZE = 1
and TRB type to TRB_DATA.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20221122085138.332434-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/cdns3/cdnsp-ring.c | 42 +++++++++++++++++++++++++++++++----------
1 file changed, 32 insertions(+), 10 deletions(-)
--- a/drivers/usb/cdns3/cdnsp-ring.c
+++ b/drivers/usb/cdns3/cdnsp-ring.c
@@ -2006,10 +2006,11 @@ int cdnsp_queue_bulk_tx(struct cdnsp_dev
int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
{
- u32 field, length_field, remainder;
+ u32 field, length_field, zlp = 0;
struct cdnsp_ep *pep = preq->pep;
struct cdnsp_ring *ep_ring;
int num_trbs;
+ u32 maxp;
int ret;
ep_ring = cdnsp_request_to_transfer_ring(pdev, preq);
@@ -2019,26 +2020,33 @@ int cdnsp_queue_ctrl_tx(struct cdnsp_dev
/* 1 TRB for data, 1 for status */
num_trbs = (pdev->three_stage_setup) ? 2 : 1;
+ maxp = usb_endpoint_maxp(pep->endpoint.desc);
+
+ if (preq->request.zero && preq->request.length &&
+ (preq->request.length % maxp == 0)) {
+ num_trbs++;
+ zlp = 1;
+ }
+
ret = cdnsp_prepare_transfer(pdev, preq, num_trbs);
if (ret)
return ret;
/* If there's data, queue data TRBs */
- if (pdev->ep0_expect_in)
- field = TRB_TYPE(TRB_DATA) | TRB_IOC;
- else
- field = TRB_ISP | TRB_TYPE(TRB_DATA) | TRB_IOC;
-
if (preq->request.length > 0) {
- remainder = cdnsp_td_remainder(pdev, 0, preq->request.length,
- preq->request.length, preq, 1, 0);
+ field = TRB_TYPE(TRB_DATA);
- length_field = TRB_LEN(preq->request.length) |
- TRB_TD_SIZE(remainder) | TRB_INTR_TARGET(0);
+ if (zlp)
+ field |= TRB_CHAIN;
+ else
+ field |= TRB_IOC | (pdev->ep0_expect_in ? 0 : TRB_ISP);
if (pdev->ep0_expect_in)
field |= TRB_DIR_IN;
+ length_field = TRB_LEN(preq->request.length) |
+ TRB_TD_SIZE(zlp) | TRB_INTR_TARGET(0);
+
cdnsp_queue_trb(pdev, ep_ring, true,
lower_32_bits(preq->request.dma),
upper_32_bits(preq->request.dma), length_field,
@@ -2046,6 +2054,20 @@ int cdnsp_queue_ctrl_tx(struct cdnsp_dev
TRB_SETUPID(pdev->setup_id) |
pdev->setup_speed);
+ if (zlp) {
+ field = TRB_TYPE(TRB_NORMAL) | TRB_IOC;
+
+ if (!pdev->ep0_expect_in)
+ field = TRB_ISP;
+
+ cdnsp_queue_trb(pdev, ep_ring, true,
+ lower_32_bits(preq->request.dma),
+ upper_32_bits(preq->request.dma), 0,
+ field | ep_ring->cycle_state |
+ TRB_SETUPID(pdev->setup_id) |
+ pdev->setup_speed);
+ }
+
pdev->ep0_stage = CDNSP_DATA_STAGE;
}
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 707/731] usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (705 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 706/731] usb: cdnsp: fix lack of ZLP for ep0 Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 708/731] arm64: dts: qcom: sm8250: fix USB-DP PHY registers Greg Kroah-Hartman
` (34 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Chunfeng Yun
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
commit 03a88b0bafbe3f548729d970d8366f48718c9b19 upstream.
Can not set the @shared_hcd to NULL before decrease the usage count
by usb_put_hcd(), this will cause the shared hcd not released.
Fixes: 04284eb74e0c ("usb: xhci-mtk: add support runtime PM")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20221128063337.18124-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-mtk.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -619,7 +619,6 @@ static int xhci_mtk_probe(struct platfor
dealloc_usb3_hcd:
usb_remove_hcd(xhci->shared_hcd);
- xhci->shared_hcd = NULL;
dealloc_usb2_hcd:
usb_remove_hcd(hcd);
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 708/731] arm64: dts: qcom: sm8250: fix USB-DP PHY registers
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (706 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 707/731] usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 709/731] usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_mode Greg Kroah-Hartman
` (33 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Johan Hovold, Bjorn Andersson
From: Johan Hovold <johan+linaro@kernel.org>
commit f8d8840c72b3df61b5252052b79020dabec01ab5 upstream.
When adding support for the DisplayPort part of the QMP PHY the binding
(and devicetree parser) for the (USB) child node was simply reused and
this has lead to some confusion.
The third DP register region is really the DP_PHY region, not "PCS" as
the binding claims, and lie at offset 0x2a00 (not 0x2c00).
Similarly, there likely are no "RX", "RX2" or "PCS_MISC" regions as
there are for the USB part of the PHY (and in any case the Linux driver
does not use them).
Note that the sixth "PCS_MISC" region is not even in the binding.
Fixes: 5aa0d1becd5b ("arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode")
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111094729.11842-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2306,10 +2306,9 @@
dp_phy: dp-phy@88ea200 {
reg = <0 0x088ea200 0 0x200>,
<0 0x088ea400 0 0x200>,
- <0 0x088eac00 0 0x400>,
+ <0 0x088eaa00 0 0x200>,
<0 0x088ea600 0 0x200>,
- <0 0x088ea800 0 0x200>,
- <0 0x088eaa00 0 0x100>;
+ <0 0x088ea800 0 0x200>;
#phy-cells = <0>;
#clock-cells = <1>;
};
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 709/731] usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_mode
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (707 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 708/731] arm64: dts: qcom: sm8250: fix USB-DP PHY registers Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 710/731] usb: dwc3: core: defer probe on ulpi_read_id timeout Greg Kroah-Hartman
` (32 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, stable, Thinh Nguyen, Sven Peter
From: Sven Peter <sven@svenpeter.dev>
commit 62c73bfea048e66168df09da6d3e4510ecda40bb upstream.
dwc->desired_dr_role is changed by dwc3_set_mode inside a spinlock but
then read by __dwc3_set_mode outside of that lock. This can lead to a
race condition when very quick successive role switch events happen:
CPU A
dwc3_set_mode(DWC3_GCTL_PRTCAP_HOST) // first role switch event
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_HOST
spin_unlock_irqrestore(&dwc->lock, flags);
queue_work(system_freezable_wq, &dwc->drd_work);
CPU B
__dwc3_set_mode
// ....
spin_lock_irqsave(&dwc->lock, flags);
// desired_dr_role is DWC3_GCTL_PRTCAP_HOST
dwc3_set_prtcap(dwc, dwc->desired_dr_role);
spin_unlock_irqrestore(&dwc->lock, flags);
CPU A
dwc3_set_mode(DWC3_GCTL_PRTCAP_DEVICE) // second event
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_DEVICE
spin_unlock_irqrestore(&dwc->lock, flags);
CPU B (continues running __dwc3_set_mode)
switch (dwc->desired_dr_role) { // DWC3_GCTL_PRTCAP_DEVICE
// ....
case DWC3_GCTL_PRTCAP_DEVICE:
// ....
ret = dwc3_gadget_init(dwc);
We then have DWC3_GCTL.DWC3_GCTL_PRTCAPDIR = DWC3_GCTL_PRTCAP_HOST and
dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST but initialized the
controller in device mode. It's also possible to get into a state
where both host and device are intialized at the same time.
Fix this race by creating a local copy of desired_dr_role inside
__dwc3_set_mode while holding dwc->lock.
Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20221128161526.79730-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/core.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -120,21 +120,25 @@ static void __dwc3_set_mode(struct work_
unsigned long flags;
int ret;
u32 reg;
+ u32 desired_dr_role;
mutex_lock(&dwc->mutex);
+ spin_lock_irqsave(&dwc->lock, flags);
+ desired_dr_role = dwc->desired_dr_role;
+ spin_unlock_irqrestore(&dwc->lock, flags);
pm_runtime_get_sync(dwc->dev);
if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_OTG)
dwc3_otg_update(dwc, 0);
- if (!dwc->desired_dr_role)
+ if (!desired_dr_role)
goto out;
- if (dwc->desired_dr_role == dwc->current_dr_role)
+ if (desired_dr_role == dwc->current_dr_role)
goto out;
- if (dwc->desired_dr_role == DWC3_GCTL_PRTCAP_OTG && dwc->edev)
+ if (desired_dr_role == DWC3_GCTL_PRTCAP_OTG && dwc->edev)
goto out;
switch (dwc->current_dr_role) {
@@ -162,7 +166,7 @@ static void __dwc3_set_mode(struct work_
*/
if (dwc->current_dr_role && ((DWC3_IP_IS(DWC3) ||
DWC3_VER_IS_PRIOR(DWC31, 190A)) &&
- dwc->desired_dr_role != DWC3_GCTL_PRTCAP_OTG)) {
+ desired_dr_role != DWC3_GCTL_PRTCAP_OTG)) {
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg |= DWC3_GCTL_CORESOFTRESET;
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
@@ -182,11 +186,11 @@ static void __dwc3_set_mode(struct work_
spin_lock_irqsave(&dwc->lock, flags);
- dwc3_set_prtcap(dwc, dwc->desired_dr_role);
+ dwc3_set_prtcap(dwc, desired_dr_role);
spin_unlock_irqrestore(&dwc->lock, flags);
- switch (dwc->desired_dr_role) {
+ switch (desired_dr_role) {
case DWC3_GCTL_PRTCAP_HOST:
ret = dwc3_host_init(dwc);
if (ret) {
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 710/731] usb: dwc3: core: defer probe on ulpi_read_id timeout
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (708 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 709/731] usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_mode Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 711/731] xhci: Prevent infinite loop in transaction errors recovery for streams Greg Kroah-Hartman
` (31 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Thinh Nguyen, Ferry Toth
From: Ferry Toth <ftoth@exalondelft.nl>
commit 63130462c919ece0ad0d9bb5a1f795ef8d79687e upstream.
Since commit 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral
if extcon is present"), Dual Role support on Intel Merrifield platform
broke due to rearranging the call to dwc3_get_extcon().
It appears to be caused by ulpi_read_id() masking the timeout on the first
test write. In the past dwc3 probe continued by calling dwc3_core_soft_reset()
followed by dwc3_get_extcon() which happend to return -EPROBE_DEFER.
On deferred probe ulpi_read_id() finally succeeded. Due to above mentioned
rearranging -EPROBE_DEFER is not returned and probe completes without phy.
On Intel Merrifield the timeout on the first test write issue is reproducible
but it is difficult to find the root cause. Using a mainline kernel and
rootfs with buildroot ulpi_read_id() succeeds. As soon as adding
ftrace / bootconfig to find out why, ulpi_read_id() fails and we can't
analyze the flow. Using another rootfs ulpi_read_id() fails even without
adding ftrace. We suspect the issue is some kind of timing / race, but
merely retrying ulpi_read_id() does not resolve the issue.
As we now changed ulpi_read_id() to return -ETIMEDOUT in this case, we
need to handle the error by calling dwc3_core_soft_reset() and request
-EPROBE_DEFER. On deferred probe ulpi_read_id() is retried and succeeds.
Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221205201527.13525-3-ftoth@exalondelft.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/core.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -963,8 +963,13 @@ static int dwc3_core_init(struct dwc3 *d
if (!dwc->ulpi_ready) {
ret = dwc3_core_ulpi_init(dwc);
- if (ret)
+ if (ret) {
+ if (ret == -ETIMEDOUT) {
+ dwc3_core_soft_reset(dwc);
+ ret = -EPROBE_DEFER;
+ }
goto err0;
+ }
dwc->ulpi_ready = true;
}
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 711/731] xhci: Prevent infinite loop in transaction errors recovery for streams
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (709 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 710/731] usb: dwc3: core: defer probe on ulpi_read_id timeout Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 712/731] HID: wacom: Ensure bootloader PID is usable in hidraw mode Greg Kroah-Hartman
` (30 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Mathias Nyman
From: Mathias Nyman <mathias.nyman@linux.intel.com>
commit a1575120972ecd7baa6af6a69e4e7ea9213bde7c upstream.
Make sure to also limit the amount of soft reset retries for transaction
errors on streams in cases where the transaction error event doesn't point
to any specific TRB.
In these cases we don't know the TRB or stream ring, but we do know which
endpoint had the error.
To keep error counting simple and functional, move the current err_count
from ring structure to endpoint structure.
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-ring.c | 14 ++++++++++----
drivers/usb/host/xhci.h | 2 +-
2 files changed, 11 insertions(+), 5 deletions(-)
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2524,7 +2524,7 @@ static int process_bulk_intr_td(struct x
switch (trb_comp_code) {
case COMP_SUCCESS:
- ep_ring->err_count = 0;
+ ep->err_count = 0;
/* handle success with untransferred data as short packet */
if (ep_trb != td->last_trb || remaining) {
xhci_warn(xhci, "WARN Successful completion on short TX\n");
@@ -2550,7 +2550,7 @@ static int process_bulk_intr_td(struct x
break;
case COMP_USB_TRANSACTION_ERROR:
if (xhci->quirks & XHCI_NO_SOFT_RETRY ||
- (ep_ring->err_count++ > MAX_SOFT_RETRY) ||
+ (ep->err_count++ > MAX_SOFT_RETRY) ||
le32_to_cpu(slot_ctx->tt_info) & TT_SLOT)
break;
@@ -2631,8 +2631,14 @@ static int handle_tx_event(struct xhci_h
case COMP_USB_TRANSACTION_ERROR:
case COMP_INVALID_STREAM_TYPE_ERROR:
case COMP_INVALID_STREAM_ID_ERROR:
- xhci_handle_halted_endpoint(xhci, ep, 0, NULL,
- EP_SOFT_RESET);
+ xhci_dbg(xhci, "Stream transaction error ep %u no id\n",
+ ep_index);
+ if (ep->err_count++ > MAX_SOFT_RETRY)
+ xhci_handle_halted_endpoint(xhci, ep, 0, NULL,
+ EP_HARD_RESET);
+ else
+ xhci_handle_halted_endpoint(xhci, ep, 0, NULL,
+ EP_SOFT_RESET);
goto cleanup;
case COMP_RING_UNDERRUN:
case COMP_RING_OVERRUN:
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -933,6 +933,7 @@ struct xhci_virt_ep {
* have to restore the device state to the previous state
*/
struct xhci_ring *new_ring;
+ unsigned int err_count;
unsigned int ep_state;
#define SET_DEQ_PENDING (1 << 0)
#define EP_HALTED (1 << 1) /* For stall handling */
@@ -1629,7 +1630,6 @@ struct xhci_ring {
* if we own the TRB (if we are the consumer). See section 4.9.1.
*/
u32 cycle_state;
- unsigned int err_count;
unsigned int stream_id;
unsigned int num_segs;
unsigned int num_trbs_free;
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 712/731] HID: wacom: Ensure bootloader PID is usable in hidraw mode
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (710 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 711/731] xhci: Prevent infinite loop in transaction errors recovery for streams Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 713/731] HID: mcp2221: dont connect hidraw Greg Kroah-Hartman
` (29 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jason Gerecke, Tatsunosuke Tobita,
Jiri Kosina
From: Jason Gerecke <killertofu@gmail.com>
commit 1db1f392591aff13fd643f0ec7c1d5e27391d700 upstream.
Some Wacom devices have a special "bootloader" mode that is used for
firmware flashing. When operating in this mode, the device cannot be
used for input, and the HID descriptor is not able to be processed by
the driver. The driver generates an "Unknown device_type" warning and
then returns an error code from wacom_probe(). This is a problem because
userspace still needs to be able to interact with the device via hidraw
to perform the firmware flash.
This commit adds a non-generic device definition for 056a:0094 which
is used when devices are in "bootloader" mode. It marks the devices
with a special BOOTLOADER type that is recognized by wacom_probe() and
wacom_raw_event(). When we see this type we ensure a hidraw device is
created and otherwise keep our hands off so that userspace is in full
control.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/wacom_sys.c | 8 ++++++++
drivers/hid/wacom_wac.c | 4 ++++
drivers/hid/wacom_wac.h | 1 +
3 files changed, 13 insertions(+)
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -160,6 +160,9 @@ static int wacom_raw_event(struct hid_de
{
struct wacom *wacom = hid_get_drvdata(hdev);
+ if (wacom->wacom_wac.features.type == BOOTLOADER)
+ return 0;
+
if (size > WACOM_PKGLEN_MAX)
return 1;
@@ -2792,6 +2795,11 @@ static int wacom_probe(struct hid_device
return error;
}
+ if (features->type == BOOTLOADER) {
+ hid_warn(hdev, "Using device in hidraw-only mode");
+ return hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+ }
+
error = wacom_parse_and_register(wacom, false);
if (error)
return error;
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -4813,6 +4813,9 @@ static const struct wacom_features wacom
static const struct wacom_features wacom_features_HID_ANY_ID =
{ "Wacom HID", .type = HID_GENERIC, .oVid = HID_ANY_ID, .oPid = HID_ANY_ID };
+static const struct wacom_features wacom_features_0x94 =
+ { "Wacom Bootloader", .type = BOOTLOADER };
+
#define USB_DEVICE_WACOM(prod) \
HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\
.driver_data = (kernel_ulong_t)&wacom_features_##prod
@@ -4886,6 +4889,7 @@ const struct hid_device_id wacom_ids[] =
{ USB_DEVICE_WACOM(0x84) },
{ USB_DEVICE_WACOM(0x90) },
{ USB_DEVICE_WACOM(0x93) },
+ { USB_DEVICE_WACOM(0x94) },
{ USB_DEVICE_WACOM(0x97) },
{ USB_DEVICE_WACOM(0x9A) },
{ USB_DEVICE_WACOM(0x9F) },
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -242,6 +242,7 @@ enum {
MTTPC,
MTTPC_B,
HID_GENERIC,
+ BOOTLOADER,
MAX_TYPE
};
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 713/731] HID: mcp2221: dont connect hidraw
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (711 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 712/731] HID: wacom: Ensure bootloader PID is usable in hidraw mode Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 714/731] loop: Fix the max_loop commandline argument treatment when it is set to 0 Greg Kroah-Hartman
` (28 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sven Zühlsdorf, Enrik Berkhan,
Benjamin Tissoires
From: Enrik Berkhan <Enrik.Berkhan@inka.de>
commit 67c90d14018775556d5420382ace86521421f9ff upstream.
The MCP2221 driver should not connect to the hidraw userspace interface,
as it needs exclusive access to the chip.
If you want to use /dev/hidrawX with the MCP2221, you need to avoid
binding this driver to the device and use the hid generic driver instead
(e.g. using udev rules).
Cc: stable@vger.kernel.org
Reported-by: Sven Zühlsdorf <sven.zuehlsdorf@vigem.de>
Signed-off-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221103222714.21566-2-Enrik.Berkhan@inka.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/hid-mcp2221.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/hid/hid-mcp2221.c
+++ b/drivers/hid/hid-mcp2221.c
@@ -840,12 +840,19 @@ static int mcp2221_probe(struct hid_devi
return ret;
}
- ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+ /*
+ * This driver uses the .raw_event callback and therefore does not need any
+ * HID_CONNECT_xxx flags.
+ */
+ ret = hid_hw_start(hdev, 0);
if (ret) {
hid_err(hdev, "can't start hardware\n");
return ret;
}
+ hid_info(hdev, "USB HID v%x.%02x Device [%s] on %s\n", hdev->version >> 8,
+ hdev->version & 0xff, hdev->name, hdev->phys);
+
ret = hid_hw_open(hdev);
if (ret) {
hid_err(hdev, "can't open device\n");
@@ -870,8 +877,7 @@ static int mcp2221_probe(struct hid_devi
mcp->adapter.retries = 1;
mcp->adapter.dev.parent = &hdev->dev;
snprintf(mcp->adapter.name, sizeof(mcp->adapter.name),
- "MCP2221 usb-i2c bridge on hidraw%d",
- ((struct hidraw *)hdev->hidraw)->minor);
+ "MCP2221 usb-i2c bridge");
ret = i2c_add_adapter(&mcp->adapter);
if (ret) {
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 714/731] loop: Fix the max_loop commandline argument treatment when it is set to 0
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (712 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 713/731] HID: mcp2221: dont connect hidraw Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 715/731] 9p: set req refcount to zero to avoid uninitialized usage Greg Kroah-Hartman
` (27 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ken Chen, Isaac J. Manjarres, Jens Axboe
From: Isaac J. Manjarres <isaacmanjarres@google.com>
commit 85c50197716c60fe57f411339c579462e563ac57 upstream.
Currently, the max_loop commandline argument can be used to specify how
many loop block devices are created at init time. If it is not
specified on the commandline, CONFIG_BLK_DEV_LOOP_MIN_COUNT loop block
devices will be created.
The max_loop commandline argument can be used to override the value of
CONFIG_BLK_DEV_LOOP_MIN_COUNT. However, when max_loop is set to 0
through the commandline, the current logic treats it as if it had not
been set, and creates CONFIG_BLK_DEV_LOOP_MIN_COUNT devices anyway.
Fix this by starting max_loop off as set to CONFIG_BLK_DEV_LOOP_MIN_COUNT.
This preserves the intended behavior of creating
CONFIG_BLK_DEV_LOOP_MIN_COUNT loop block devices if the max_loop
commandline parameter is not specified, and allowing max_loop to
be respected for all values, including 0.
This allows environments that can create all of their required loop
block devices on demand to not have to unnecessarily preallocate loop
block devices.
Fixes: 732850827450 ("remove artificial software max_loop limit")
Cc: stable@vger.kernel.org
Cc: Ken Chen <kenchen@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20221208212902.765781-1-isaacmanjarres@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/loop.c | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -2091,7 +2091,16 @@ static const struct block_device_operati
/*
* And now the modules code and kernel interface.
*/
-static int max_loop;
+
+/*
+ * If max_loop is specified, create that many devices upfront.
+ * This also becomes a hard limit. If max_loop is not specified,
+ * create CONFIG_BLK_DEV_LOOP_MIN_COUNT loop devices at module
+ * init time. Loop devices can be requested on-demand with the
+ * /dev/loop-control interface, or be instantiated by accessing
+ * a 'dead' device node.
+ */
+static int max_loop = CONFIG_BLK_DEV_LOOP_MIN_COUNT;
module_param(max_loop, int, 0444);
MODULE_PARM_DESC(max_loop, "Maximum number of loop devices");
module_param(max_part, int, 0444);
@@ -2536,7 +2545,7 @@ MODULE_ALIAS("devname:loop-control");
static int __init loop_init(void)
{
- int i, nr;
+ int i;
int err;
part_shift = 0;
@@ -2564,19 +2573,6 @@ static int __init loop_init(void)
goto err_out;
}
- /*
- * If max_loop is specified, create that many devices upfront.
- * This also becomes a hard limit. If max_loop is not specified,
- * create CONFIG_BLK_DEV_LOOP_MIN_COUNT loop devices at module
- * init time. Loop devices can be requested on-demand with the
- * /dev/loop-control interface, or be instantiated by accessing
- * a 'dead' device node.
- */
- if (max_loop)
- nr = max_loop;
- else
- nr = CONFIG_BLK_DEV_LOOP_MIN_COUNT;
-
err = misc_register(&loop_misc);
if (err < 0)
goto err_out;
@@ -2588,7 +2584,7 @@ static int __init loop_init(void)
}
/* pre-create number of devices given by config or max_loop */
- for (i = 0; i < nr; i++)
+ for (i = 0; i < max_loop; i++)
loop_add(i);
printk(KERN_INFO "loop: module loaded\n");
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 715/731] 9p: set req refcount to zero to avoid uninitialized usage
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (713 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 714/731] loop: Fix the max_loop commandline argument treatment when it is set to 0 Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 716/731] security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6 Greg Kroah-Hartman
` (26 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+8f1060e2aaf8ca55220b,
Schspa Shi, Christian Schoenebeck, Dominique Martinet
From: Schspa Shi <schspa@gmail.com>
commit 26273ade77f54716e30dfd40ac6e85ceb54ac0f9 upstream.
When a new request is allocated, the refcount will be zero if it is
reused, but if the request is newly allocated from slab, it is not fully
initialized before being added to idr.
If the p9_read_work got a response before the refcount initiated. It will
use a uninitialized req, which will result in a bad request data struct.
Here is the logs from syzbot.
Corrupted memory at 0xffff88807eade00b [ 0xff 0x07 0x00 0x00 0x00 0x00
0x00 0x00 . . . . . . . . ] (in kfence-#110):
p9_fcall_fini net/9p/client.c:248 [inline]
p9_req_put net/9p/client.c:396 [inline]
p9_req_put+0x208/0x250 net/9p/client.c:390
p9_client_walk+0x247/0x540 net/9p/client.c:1165
clone_fid fs/9p/fid.h:21 [inline]
v9fs_fid_xattr_set+0xe4/0x2b0 fs/9p/xattr.c:118
v9fs_xattr_set fs/9p/xattr.c:100 [inline]
v9fs_xattr_handler_set+0x6f/0x120 fs/9p/xattr.c:159
__vfs_setxattr+0x119/0x180 fs/xattr.c:182
__vfs_setxattr_noperm+0x129/0x5f0 fs/xattr.c:216
__vfs_setxattr_locked+0x1d3/0x260 fs/xattr.c:277
vfs_setxattr+0x143/0x340 fs/xattr.c:309
setxattr+0x146/0x160 fs/xattr.c:617
path_setxattr+0x197/0x1c0 fs/xattr.c:636
__do_sys_setxattr fs/xattr.c:652 [inline]
__se_sys_setxattr fs/xattr.c:648 [inline]
__ia32_sys_setxattr+0xc0/0x160 fs/xattr.c:648
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
entry_SYSENTER_compat_after_hwframe+0x70/0x82
Below is a similar scenario, the scenario in the syzbot log looks more
complicated than this one, but this patch can fix it.
T21124 p9_read_work
======================== second trans =================================
p9_client_walk
p9_client_rpc
p9_client_prepare_req
p9_tag_alloc
req = kmem_cache_alloc(p9_req_cache, GFP_NOFS);
tag = idr_alloc
<< preempted >>
req->tc.tag = tag;
/* req->[refcount/tag] == uninitialized */
m->rreq = p9_tag_lookup(m->client, m->rc.tag);
/* increments uninitalized refcount */
refcount_set(&req->refcount, 2);
/* cb drops one ref */
p9_client_cb(req)
/* reader thread drops its ref:
request is incorrectly freed */
p9_req_put(req)
/* use after free and ref underflow */
p9_req_put(req)
To fix it, we can initialize the refcount to zero before add to idr.
Link: https://lkml.kernel.org/r/20221201033310.18589-1-schspa@gmail.com
Cc: stable@vger.kernel.org # 6.0+ due to 6cda12864cb0 ("9p: Drop kref usage")
Fixes: 728356dedeff ("9p: Add refcount to p9_req_t")
Reported-by: syzbot+8f1060e2aaf8ca55220b@syzkaller.appspotmail.com
Signed-off-by: Schspa Shi <schspa@gmail.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/9p/client.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -281,6 +281,11 @@ p9_tag_alloc(struct p9_client *c, int8_t
p9pdu_reset(&req->rc);
req->t_err = 0;
req->status = REQ_STATUS_ALLOC;
+ /* refcount needs to be set to 0 before inserting into the idr
+ * so p9_tag_lookup does not accept a request that is not fully
+ * initialized. refcount_set to 2 below will mark request ready.
+ */
+ refcount_set(&req->refcount, 0);
init_waitqueue_head(&req->wq);
INIT_LIST_HEAD(&req->req_list);
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 716/731] security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (714 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 715/731] 9p: set req refcount to zero to avoid uninitialized usage Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 717/731] reiserfs: Add missing calls to reiserfs_security_free() Greg Kroah-Hartman
` (25 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Nathan Chancellor, Kees Cook
From: Nathan Chancellor <nathan@kernel.org>
commit d6a9fb87e9d18f3394a9845546bbe868efdccfd2 upstream.
A bad bug in clang's implementation of -fzero-call-used-regs can result
in NULL pointer dereferences (see the links above the check for more
information). Restrict CONFIG_CC_HAS_ZERO_CALL_USED_REGS to either a
supported GCC version or a clang newer than 15.0.6, which will catch
both a theoretical 15.0.7 and the upcoming 16.0.0, which will both have
the bug fixed.
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221214232602.4118147-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
security/Kconfig.hardening | 3 +++
1 file changed, 3 insertions(+)
--- a/security/Kconfig.hardening
+++ b/security/Kconfig.hardening
@@ -240,6 +240,9 @@ config INIT_ON_FREE_DEFAULT_ON
config CC_HAS_ZERO_CALL_USED_REGS
def_bool $(cc-option,-fzero-call-used-regs=used-gpr)
+ # https://github.com/ClangBuiltLinux/linux/issues/1766
+ # https://github.com/llvm/llvm-project/issues/59242
+ depends on !CC_IS_CLANG || CLANG_VERSION > 150006
config ZERO_CALL_USED_REGS
bool "Enable register zeroing on function exit"
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 717/731] reiserfs: Add missing calls to reiserfs_security_free()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (715 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 716/731] security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6 Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 718/731] iio: fix memory leak in iio_device_register_eventset() Greg Kroah-Hartman
` (24 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jeff Mahoney, Tetsuo Handa,
Mimi Zohar, Roberto Sassu, Paul Moore
From: Roberto Sassu <roberto.sassu@huawei.com>
commit 572302af1258459e124437b8f3369357447afac7 upstream.
Commit 57fe60df6241 ("reiserfs: add atomic addition of selinux attributes
during inode creation") defined reiserfs_security_free() to free the name
and value of a security xattr allocated by the active LSM through
security_old_inode_init_security(). However, this function is not called
in the reiserfs code.
Thus, add a call to reiserfs_security_free() whenever
reiserfs_security_init() is called, and initialize value to NULL, to avoid
to call kfree() on an uninitialized pointer.
Finally, remove the kfree() for the xattr name, as it is not allocated
anymore.
Fixes: 57fe60df6241 ("reiserfs: add atomic addition of selinux attributes during inode creation")
Cc: stable@vger.kernel.org
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/reiserfs/namei.c | 4 ++++
fs/reiserfs/xattr_security.c | 2 +-
2 files changed, 5 insertions(+), 1 deletion(-)
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -696,6 +696,7 @@ static int reiserfs_create(struct user_n
out_failed:
reiserfs_write_unlock(dir->i_sb);
+ reiserfs_security_free(&security);
return retval;
}
@@ -779,6 +780,7 @@ static int reiserfs_mknod(struct user_na
out_failed:
reiserfs_write_unlock(dir->i_sb);
+ reiserfs_security_free(&security);
return retval;
}
@@ -878,6 +880,7 @@ static int reiserfs_mkdir(struct user_na
retval = journal_end(&th);
out_failed:
reiserfs_write_unlock(dir->i_sb);
+ reiserfs_security_free(&security);
return retval;
}
@@ -1194,6 +1197,7 @@ static int reiserfs_symlink(struct user_
retval = journal_end(&th);
out_failed:
reiserfs_write_unlock(parent_dir->i_sb);
+ reiserfs_security_free(&security);
return retval;
}
--- a/fs/reiserfs/xattr_security.c
+++ b/fs/reiserfs/xattr_security.c
@@ -50,6 +50,7 @@ int reiserfs_security_init(struct inode
int error;
sec->name = NULL;
+ sec->value = NULL;
/* Don't add selinux attributes on xattrs - they'll never get used */
if (IS_PRIVATE(dir))
@@ -95,7 +96,6 @@ int reiserfs_security_write(struct reise
void reiserfs_security_free(struct reiserfs_security_handle *sec)
{
- kfree(sec->name);
kfree(sec->value);
sec->name = NULL;
sec->value = NULL;
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 718/731] iio: fix memory leak in iio_device_register_eventset()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (716 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 717/731] reiserfs: Add missing calls to reiserfs_security_free() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 719/731] iio: adc: ad_sigma_delta: do not use internal iio_dev lock Greg Kroah-Hartman
` (23 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zeng Heng, Stable, Jonathan Cameron
From: Zeng Heng <zengheng4@huawei.com>
commit 86fdd15e10e404e70ecb2a3bff24d70356d42b36 upstream.
When iio_device_register_sysfs_group() returns failed,
iio_device_register_eventset() needs to free attrs array.
Otherwise, kmemleak would scan & report memory leak as below:
unreferenced object 0xffff88810a1cc3c0 (size 32):
comm "100-i2c-vcnl302", pid 728, jiffies 4295052307 (age 156.027s)
backtrace:
__kmalloc+0x46/0x1b0
iio_device_register_eventset at drivers/iio/industrialio-event.c:541
__iio_device_register at drivers/iio/industrialio-core.c:1959
__devm_iio_device_register at drivers/iio/industrialio-core.c:2040
Fixes: 32f171724e5c ("iio: core: rework iio device group creation")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20221115023712.3726854-1-zengheng4@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/industrialio-event.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -549,7 +549,7 @@ int iio_device_register_eventset(struct
ret = iio_device_register_sysfs_group(indio_dev, &ev_int->group);
if (ret)
- goto error_free_setup_event_lines;
+ goto error_free_group_attrs;
ev_int->ioctl_handler.ioctl = iio_event_ioctl;
iio_device_ioctl_handler_register(&iio_dev_opaque->indio_dev,
@@ -557,6 +557,8 @@ int iio_device_register_eventset(struct
return 0;
+error_free_group_attrs:
+ kfree(ev_int->group.attrs);
error_free_setup_event_lines:
iio_free_chan_devattr_list(&ev_int->dev_attr_list);
kfree(ev_int);
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 719/731] iio: adc: ad_sigma_delta: do not use internal iio_dev lock
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (717 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 718/731] iio: fix memory leak in iio_device_register_eventset() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 720/731] iio: adc128s052: add proper .data members in adc128_of_match table Greg Kroah-Hartman
` (22 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nuno Sá,
Miquel Raynal, Jonathan Cameron, Stable
From: Nuno Sá <nuno.sa@analog.com>
commit 20228a1d5a55e7db0c6720840f2c7d2b48c55f69 upstream.
Drop 'mlock' usage by making use of iio_device_claim_direct_mode().
This change actually makes sure we cannot do a single conversion while
buffering is enable. Note there was a potential race in the previous
code since we were only acquiring the lock after checking if the bus is
enabled.
Fixes: af3008485ea0 ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: <Stable@vger.kernel.org> #No rush as race is very old.
Link: https://lore.kernel.org/r/20220920112821.975359-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/ad_sigma_delta.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -280,10 +280,10 @@ int ad_sigma_delta_single_conversion(str
unsigned int data_reg;
int ret = 0;
- if (iio_buffer_enabled(indio_dev))
- return -EBUSY;
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
- mutex_lock(&indio_dev->mlock);
ad_sigma_delta_set_channel(sigma_delta, chan->address);
spi_bus_lock(sigma_delta->spi->master);
@@ -322,7 +322,7 @@ out:
ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
sigma_delta->bus_locked = false;
spi_bus_unlock(sigma_delta->spi->master);
- mutex_unlock(&indio_dev->mlock);
+ iio_device_release_direct_mode(indio_dev);
if (ret)
return ret;
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 720/731] iio: adc128s052: add proper .data members in adc128_of_match table
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (718 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 719/731] iio: adc: ad_sigma_delta: do not use internal iio_dev lock Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 721/731] regulator: core: fix deadlock on regulator enable Greg Kroah-Hartman
` (21 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rasmus Villemoes, Andy Shevchenko,
Stable, Jonathan Cameron
From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
commit e2af60f5900c6ade53477b494ffb54690eee11f5 upstream.
Prior to commit bd5d54e4d49d ("iio: adc128s052: add ACPI _HID
AANT1280"), the driver unconditionally used spi_get_device_id() to get
the index into the adc128_config array.
However, with that commit, OF-based boards now incorrectly treat all
supported sensors as if they are an adc128s052, because all the .data
members of the adc128_of_match table are implicitly 0. Our board,
which has an adc122s021, thus exposes 8 channels whereas it really
only has two.
Fixes: bd5d54e4d49d ("iio: adc128s052: add ACPI _HID AANT1280")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221115132324.1078169-1-linux@rasmusvillemoes.dk
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/ti-adc128s052.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/iio/adc/ti-adc128s052.c
+++ b/drivers/iio/adc/ti-adc128s052.c
@@ -193,13 +193,13 @@ static int adc128_remove(struct spi_devi
}
static const struct of_device_id adc128_of_match[] = {
- { .compatible = "ti,adc128s052", },
- { .compatible = "ti,adc122s021", },
- { .compatible = "ti,adc122s051", },
- { .compatible = "ti,adc122s101", },
- { .compatible = "ti,adc124s021", },
- { .compatible = "ti,adc124s051", },
- { .compatible = "ti,adc124s101", },
+ { .compatible = "ti,adc128s052", .data = (void*)0L, },
+ { .compatible = "ti,adc122s021", .data = (void*)1L, },
+ { .compatible = "ti,adc122s051", .data = (void*)1L, },
+ { .compatible = "ti,adc122s101", .data = (void*)1L, },
+ { .compatible = "ti,adc124s021", .data = (void*)2L, },
+ { .compatible = "ti,adc124s051", .data = (void*)2L, },
+ { .compatible = "ti,adc124s101", .data = (void*)2L, },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, adc128_of_match);
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 721/731] regulator: core: fix deadlock on regulator enable
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (719 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 720/731] iio: adc128s052: add proper .data members in adc128_of_match table Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 722/731] floppy: Fix memory leak in do_floppy_init() Greg Kroah-Hartman
` (20 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Johan Hovold, Mark Brown
From: Johan Hovold <johan+linaro@kernel.org>
commit cb3543cff90a4448ed560ac86c98033ad5fecda9 upstream.
When updating the operating mode as part of regulator enable, the caller
has already locked the regulator tree and drms_uA_update() must not try
to do the same in order not to trigger a deadlock.
The lock inversion is reported by lockdep as:
======================================================
WARNING: possible circular locking dependency detected
6.1.0-next-20221215 #142 Not tainted
------------------------------------------------------
udevd/154 is trying to acquire lock:
ffffc11f123d7e50 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x280
but task is already holding lock:
ffff80000e4c36e8 (regulator_ww_class_acquire){+.+.}-{0:0}, at: regulator_enable+0x34/0x80
which lock already depends on the new lock.
...
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(regulator_ww_class_acquire);
lock(regulator_list_mutex);
lock(regulator_ww_class_acquire);
lock(regulator_list_mutex);
*** DEADLOCK ***
just before probe of a Qualcomm UFS controller (occasionally) deadlocks
when enabling one of its regulators.
Fixes: 9243a195be7a ("regulator: core: Change voltage setting path")
Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
Cc: stable@vger.kernel.org # 5.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221215104646.19818-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/regulator/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -962,7 +962,7 @@ static int drms_uA_update(struct regulat
/* get input voltage */
input_uV = 0;
if (rdev->supply)
- input_uV = regulator_get_voltage(rdev->supply);
+ input_uV = regulator_get_voltage_rdev(rdev->supply->rdev);
if (input_uV <= 0)
input_uV = rdev->constraints->input_uV;
if (input_uV <= 0) {
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 722/731] floppy: Fix memory leak in do_floppy_init()
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (720 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 721/731] regulator: core: fix deadlock on regulator enable Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 723/731] gcov: add support for checksum field Greg Kroah-Hartman
` (19 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yuan Can, Denis Efremov
From: Yuan Can <yuancan@huawei.com>
commit f8ace2e304c5dd8a7328db9cd2b8a4b1b98d83ec upstream.
A memory leak was reported when floppy_alloc_disk() failed in
do_floppy_init().
unreferenced object 0xffff888115ed25a0 (size 8):
comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s)
hex dump (first 8 bytes):
00 ac 67 5b 81 88 ff ff ..g[....
backtrace:
[<000000007f457abb>] __kmalloc_node+0x4c/0xc0
[<00000000a87bfa9e>] blk_mq_realloc_tag_set_tags.part.0+0x6f/0x180
[<000000006f02e8b1>] blk_mq_alloc_tag_set+0x573/0x1130
[<0000000066007fd7>] 0xffffffffc06b8b08
[<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0
[<00000000e26d04ee>] do_init_module+0x1a4/0x680
[<000000001bb22407>] load_module+0x6249/0x7110
[<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200
[<000000007bddca46>] do_syscall_64+0x35/0x80
[<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
unreferenced object 0xffff88810fc30540 (size 32):
comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000007f457abb>] __kmalloc_node+0x4c/0xc0
[<000000006b91eab4>] blk_mq_alloc_tag_set+0x393/0x1130
[<0000000066007fd7>] 0xffffffffc06b8b08
[<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0
[<00000000e26d04ee>] do_init_module+0x1a4/0x680
[<000000001bb22407>] load_module+0x6249/0x7110
[<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200
[<000000007bddca46>] do_syscall_64+0x35/0x80
[<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
If the floppy_alloc_disk() failed, disks of current drive will not be set,
thus the lastest allocated set->tag cannot be freed in the error handling
path. A simple call graph shown as below:
floppy_module_init()
floppy_init()
do_floppy_init()
for (drive = 0; drive < N_DRIVE; drive++)
blk_mq_alloc_tag_set()
blk_mq_alloc_tag_set_tags()
blk_mq_realloc_tag_set_tags() # set->tag allocated
floppy_alloc_disk()
blk_mq_alloc_disk() # error occurred, disks failed to allocated
->out_put_disk:
for (drive = 0; drive < N_DRIVE; drive++)
if (!disks[drive][0]) # the last disks is not set and loop break
break;
blk_mq_free_tag_set() # the latest allocated set->tag leaked
Fix this problem by free the set->tag of current drive before jump to
error handling path.
Cc: stable@vger.kernel.org
Fixes: 302cfee15029 ("floppy: use a separate gendisk for each media format")
Signed-off-by: Yuan Can <yuancan@huawei.com>
[efremov: added stable list, changed title]
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/floppy.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4587,8 +4587,10 @@ static int __init do_floppy_init(void)
goto out_put_disk;
err = floppy_alloc_disk(drive, 0);
- if (err)
+ if (err) {
+ blk_mq_free_tag_set(&tag_sets[drive]);
goto out_put_disk;
+ }
timer_setup(&motor_off_timer[drive], motor_off_callback, 0);
}
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 723/731] gcov: add support for checksum field
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (721 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 722/731] floppy: Fix memory leak in do_floppy_init() Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 724/731] fbdev: fbcon: release buffer when fbcon_do_set_font() failed Greg Kroah-Hartman
` (18 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rickard x Andersson,
Peter Oberparleiter, Martin Liska, Andrew Morton
From: Rickard x Andersson <rickaran@axis.com>
commit e96b95c2b7a63a454b6498e2df67aac14d046d13 upstream.
In GCC version 12.1 a checksum field was added.
This patch fixes a kernel crash occurring during boot when using
gcov-kernel with GCC version 12.2. The crash occurred on a system running
on i.MX6SX.
Link: https://lkml.kernel.org/r/20221220102318.3418501-1-rickaran@axis.com
Fixes: 977ef30a7d88 ("gcov: support GCC 12.1 and newer compilers")
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Martin Liska <mliska@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/gcov/gcc_4_7.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/kernel/gcov/gcc_4_7.c
+++ b/kernel/gcov/gcc_4_7.c
@@ -82,6 +82,7 @@ struct gcov_fn_info {
* @version: gcov version magic indicating the gcc version used for compilation
* @next: list head for a singly-linked list
* @stamp: uniquifying time stamp
+ * @checksum: unique object checksum
* @filename: name of the associated gcov data file
* @merge: merge functions (null for unused counter type)
* @n_functions: number of instrumented functions
@@ -94,6 +95,10 @@ struct gcov_info {
unsigned int version;
struct gcov_info *next;
unsigned int stamp;
+ /* Since GCC 12.1 a checksum field is added. */
+#if (__GNUC__ >= 12)
+ unsigned int checksum;
+#endif
const char *filename;
void (*merge[GCOV_COUNTERS])(gcov_type *, unsigned int);
unsigned int n_functions;
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 724/731] fbdev: fbcon: release buffer when fbcon_do_set_font() failed
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (722 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 723/731] gcov: add support for checksum field Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 725/731] ovl: fix use inode directly in rcu-walk mode Greg Kroah-Hartman
` (17 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, syzbot, Tetsuo Handa, Helge Deller
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
commit 3c3bfb8586f848317ceba5d777e11204ba3e5758 upstream.
syzbot is reporting memory leak at fbcon_do_set_font() [1], for
commit a5a923038d70 ("fbdev: fbcon: Properly revert changes when
vc_resize() failed") missed that the buffer might be newly allocated
by fbcon_set_font().
Link: https://syzkaller.appspot.com/bug?extid=25bdb7b1703639abd498 [1]
Reported-by: syzbot <syzbot+25bdb7b1703639abd498@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+25bdb7b1703639abd498@syzkaller.appspotmail.com>
Fixes: a5a923038d70 ("fbdev: fbcon: Properly revert changes when vc_resize() failed")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/video/fbdev/core/fbcon.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -2462,7 +2462,8 @@ err_out:
if (userfont) {
p->userfont = old_userfont;
- REFCOUNT(data)--;
+ if (--REFCOUNT(data) == 0)
+ kfree(data - FONT_EXTRA_WORDS * sizeof(int));
}
vc->vc_font.width = old_width;
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 725/731] ovl: fix use inode directly in rcu-walk mode
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (723 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 724/731] fbdev: fbcon: release buffer when fbcon_do_set_font() failed Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 726/731] btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range Greg Kroah-Hartman
` (16 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen Zhongjin, Miklos Szeredi,
syzbot+a4055c78774bbf3498bb
From: Chen Zhongjin <chenzhongjin@huawei.com>
commit 672e4268b2863d7e4978dfed29552b31c2f9bd4e upstream.
ovl_dentry_revalidate_common() can be called in rcu-walk mode. As document
said, "in rcu-walk mode, d_parent and d_inode should not be used without
care".
Check inode here to protect access under rcu-walk mode.
Fixes: bccece1ead36 ("ovl: allow remote upper")
Reported-and-tested-by: syzbot+a4055c78774bbf3498bb@syzkaller.appspotmail.com
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Cc: <stable@vger.kernel.org> # v5.7
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/overlayfs/super.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -138,11 +138,16 @@ static int ovl_dentry_revalidate_common(
unsigned int flags, bool weak)
{
struct ovl_entry *oe = dentry->d_fsdata;
+ struct inode *inode = d_inode_rcu(dentry);
struct dentry *upper;
unsigned int i;
int ret = 1;
- upper = ovl_dentry_upper(dentry);
+ /* Careful in RCU mode */
+ if (!inode)
+ return -ECHILD;
+
+ upper = ovl_i_dentry_upper(inode);
if (upper)
ret = ovl_revalidate_real(upper, flags, weak);
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 726/731] btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (724 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 725/731] ovl: fix use inode directly in rcu-walk mode Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 727/731] scsi: qla2xxx: Fix crash when I/O abort times out Greg Kroah-Hartman
` (15 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+0b1fb6b0108c27419f9f,
Josef Bacik, Filipe Manana, David Sterba
From: Filipe Manana <fdmanana@suse.com>
commit 162d053e15fe985f754ef495a96eb3db970c43ed upstream.
If we get -ENOMEM while dropping file extent items in a given range, at
btrfs_drop_extents(), due to failure to allocate memory when attempting to
increment the reference count for an extent or drop the reference count,
we handle it with a BUG_ON(). This is excessive, instead we can simply
abort the transaction and return the error to the caller. In fact most
callers of btrfs_drop_extents(), directly or indirectly, already abort
the transaction if btrfs_drop_extents() returns any error.
Also, we already have error paths at btrfs_drop_extents() that may return
-ENOMEM and in those cases we abort the transaction, like for example
anything that changes the b+tree may return -ENOMEM due to a failure to
allocate a new extent buffer when COWing an existing extent buffer, such
as a call to btrfs_duplicate_item() for example.
So replace the BUG_ON() calls with proper logic to abort the transaction
and return the error.
Reported-by: syzbot+0b1fb6b0108c27419f9f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000089773e05ee4b9cb4@google.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/file.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -872,7 +872,10 @@ next_slot:
args->start - extent_offset,
0, false);
ret = btrfs_inc_extent_ref(trans, &ref);
- BUG_ON(ret); /* -ENOMEM */
+ if (ret) {
+ btrfs_abort_transaction(trans, ret);
+ break;
+ }
}
key.offset = args->start;
}
@@ -959,7 +962,10 @@ delete_extent_item:
key.offset - extent_offset, 0,
false);
ret = btrfs_free_extent(trans, &ref);
- BUG_ON(ret); /* -ENOMEM */
+ if (ret) {
+ btrfs_abort_transaction(trans, ret);
+ break;
+ }
args->bytes_found += extent_end - key.offset;
}
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 727/731] scsi: qla2xxx: Fix crash when I/O abort times out
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (725 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 726/731] btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 728/731] net: stmmac: fix errno when create_singlethread_workqueue() fails Greg Kroah-Hartman
` (14 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marco Patalano, Arun Easi,
Nilesh Javali, Martin K. Petersen
From: Arun Easi <aeasi@marvell.com>
commit 68ad83188d782b2ecef2e41ac245d27e0710fe8e upstream.
While performing CPU hotplug, a crash with the following stack was seen:
Call Trace:
qla24xx_process_response_queue+0x42a/0x970 [qla2xxx]
qla2x00_start_nvme_mq+0x3a2/0x4b0 [qla2xxx]
qla_nvme_post_cmd+0x166/0x240 [qla2xxx]
nvme_fc_start_fcp_op.part.0+0x119/0x2e0 [nvme_fc]
blk_mq_dispatch_rq_list+0x17b/0x610
__blk_mq_sched_dispatch_requests+0xb0/0x140
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x35/0x90
__blk_mq_delay_run_hw_queue+0x161/0x180
blk_execute_rq+0xbe/0x160
__nvme_submit_sync_cmd+0x16f/0x220 [nvme_core]
nvmf_connect_admin_queue+0x11a/0x170 [nvme_fabrics]
nvme_fc_create_association.cold+0x50/0x3dc [nvme_fc]
nvme_fc_connect_ctrl_work+0x19/0x30 [nvme_fc]
process_one_work+0x1e8/0x3c0
On abort timeout, completion was called without checking if the I/O was
already completed.
Verify that I/O and abort request are indeed outstanding before attempting
completion.
Fixes: 71c80b75ce8f ("scsi: qla2xxx: Do command completion on abort timeout")
Reported-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20221129092634.15347-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/qla2xxx/qla_init.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -110,6 +110,7 @@ static void qla24xx_abort_iocb_timeout(v
struct qla_qpair *qpair = sp->qpair;
u32 handle;
unsigned long flags;
+ int sp_found = 0, cmdsp_found = 0;
if (sp->cmd_sp)
ql_dbg(ql_dbg_async, sp->vha, 0x507c,
@@ -124,18 +125,21 @@ static void qla24xx_abort_iocb_timeout(v
spin_lock_irqsave(qpair->qp_lock_ptr, flags);
for (handle = 1; handle < qpair->req->num_outstanding_cmds; handle++) {
if (sp->cmd_sp && (qpair->req->outstanding_cmds[handle] ==
- sp->cmd_sp))
+ sp->cmd_sp)) {
qpair->req->outstanding_cmds[handle] = NULL;
+ cmdsp_found = 1;
+ }
/* removing the abort */
if (qpair->req->outstanding_cmds[handle] == sp) {
qpair->req->outstanding_cmds[handle] = NULL;
+ sp_found = 1;
break;
}
}
spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);
- if (sp->cmd_sp) {
+ if (cmdsp_found && sp->cmd_sp) {
/*
* This done function should take care of
* original command ref: INIT
@@ -143,8 +147,10 @@ static void qla24xx_abort_iocb_timeout(v
sp->cmd_sp->done(sp->cmd_sp, QLA_OS_TIMER_EXPIRED);
}
- abt->u.abt.comp_status = cpu_to_le16(CS_TIMEOUT);
- sp->done(sp, QLA_OS_TIMER_EXPIRED);
+ if (sp_found) {
+ abt->u.abt.comp_status = cpu_to_le16(CS_TIMEOUT);
+ sp->done(sp, QLA_OS_TIMER_EXPIRED);
+ }
}
static void qla24xx_abort_sp_done(srb_t *sp, int res)
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 728/731] net: stmmac: fix errno when create_singlethread_workqueue() fails
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (726 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 727/731] scsi: qla2xxx: Fix crash when I/O abort times out Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 729/731] media: dvbdev: fix build warning due to comments Greg Kroah-Hartman
` (13 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Leon Romanovsky, Paolo Abeni
From: Gaosheng Cui <cuigaosheng1@huawei.com>
commit 2cb815cfc78b137ee38bcd65e7c955d6cc2cc250 upstream.
We should set the return value to -ENOMEM explicitly when
create_singlethread_workqueue() fails in stmmac_dvr_probe(),
otherwise we'll lose the error value.
Fixes: a137f3f27f92 ("net: stmmac: fix possible memory leak in stmmac_dvr_probe()")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221214080117.3514615-1-cuigaosheng1@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7046,6 +7046,7 @@ int stmmac_dvr_probe(struct device *devi
priv->wq = create_singlethread_workqueue("stmmac_wq");
if (!priv->wq) {
dev_err(priv->device, "failed to create workqueue\n");
+ ret = -ENOMEM;
goto error_wq_init;
}
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 729/731] media: dvbdev: fix build warning due to comments
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (727 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 728/731] net: stmmac: fix errno when create_singlethread_workqueue() fails Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 730/731] media: dvbdev: fix refcnt bug Greg Kroah-Hartman
` (12 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stephen Rothwell, Lin Ma,
Hans Verkuil, Mauro Carvalho Chehab
From: Lin Ma <linma@zju.edu.cn>
commit 3edfd14bb50fa6f94ed1a37bbb17d9f1c2793b57 upstream.
Previous commit that introduces reference counter does not add proper
comments, which will lead to warning when building htmldocs. Fix them.
Reported-by: "Stephen Rothwell" <sfr@canb.auug.org.au>
Fixes: 0fc044b2b5e2 ("media: dvbdev: adopts refcnt to avoid UAF")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/media/dvbdev.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/include/media/dvbdev.h
+++ b/include/media/dvbdev.h
@@ -126,6 +126,7 @@ struct dvb_adapter {
* struct dvb_device - represents a DVB device node
*
* @list_head: List head with all DVB devices
+ * @ref: reference counter
* @fops: pointer to struct file_operations
* @adapter: pointer to the adapter that holds this device node
* @type: type of the device, as defined by &enum dvb_device_type.
@@ -196,7 +197,7 @@ struct dvb_device {
struct dvb_device *dvb_device_get(struct dvb_device *dvbdev);
/**
- * dvb_device_get - Decrease dvb_device reference
+ * dvb_device_put - Decrease dvb_device reference
*
* @dvbdev: pointer to struct dvb_device
*/
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 730/731] media: dvbdev: fix refcnt bug
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (728 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 729/731] media: dvbdev: fix build warning due to comments Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 731/731] extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered Greg Kroah-Hartman
` (11 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+fce48a3dd3368645bd6c, Lin Ma,
Hans Verkuil, Mauro Carvalho Chehab
From: Lin Ma <linma@zju.edu.cn>
commit 3a664569b71b0a52be5ffb9fb87cc4f83d29bd71 upstream.
Previous commit initialize the dvbdev->ref before the template copy,
which will overwrite the reference and cause refcnt bug.
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 0 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc6-next-20221128-syzkaller #0
...
RIP: 0010:refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25
RSP: 0000:ffffc900000678d0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88813ff58000 RSI: ffffffff81660e7c RDI: fffff5200000cf0c
RBP: ffff888022a45010 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88823ffff000 CR3: 000000000c48e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__refcount_add include/linux/refcount.h:199 [inline]
__refcount_inc include/linux/refcount.h:250 [inline]
refcount_inc include/linux/refcount.h:267 [inline]
kref_get include/linux/kref.h:45 [inline]
dvb_device_get drivers/media/dvb-core/dvbdev.c:585 [inline]
dvb_register_device+0xe83/0x16e0 drivers/media/dvb-core/dvbdev.c:517
...
Just place the kref_init at correct position.
Reported-by: syzbot+fce48a3dd3368645bd6c@syzkaller.appspotmail.com
Fixes: 0fc044b2b5e2 ("media: dvbdev: adopts refcnt to avoid UAF")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/dvb-core/dvbdev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -490,8 +490,8 @@ int dvb_register_device(struct dvb_adapt
return -ENOMEM;
}
- kref_init(&dvbdev->ref);
memcpy(dvbdev, template, sizeof(struct dvb_device));
+ kref_init(&dvbdev->ref);
dvbdev->type = type;
dvbdev->id = id;
dvbdev->adapter = adap;
^ permalink raw reply [flat|nested] 763+ messages in thread
* [PATCH 5.15 731/731] extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (729 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 730/731] media: dvbdev: fix refcnt bug Greg Kroah-Hartman
@ 2022-12-28 14:43 ` Greg Kroah-Hartman
2022-12-28 19:08 ` [PATCH 5.15 000/731] 5.15.86-rc1 review Florian Fainelli
` (10 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-28 14:43 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yassine Oudjana, Marek Vasut,
Heikki Krogerus
From: Yassine Oudjana <y.oudjana@protonmail.com>
commit 341fd15e2e18c24d5c738496cfc3d7a272241201 upstream.
Commit bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support")
added an optional Type-C interface to the driver but missed to check
if it is in use when calling the IRQ handler. This causes an oops on
devices currently using the old extcon interface. Check if a Type-C
port is registered before calling the Type-C IRQ handler.
Fixes: bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221107153317.657803-1-y.oudjana@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/extcon/extcon-usbc-tusb320.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/extcon/extcon-usbc-tusb320.c
+++ b/drivers/extcon/extcon-usbc-tusb320.c
@@ -327,7 +327,13 @@ static irqreturn_t tusb320_state_update_
return IRQ_NONE;
tusb320_extcon_irq_handler(priv, reg);
- tusb320_typec_irq_handler(priv, reg);
+
+ /*
+ * Type-C support is optional. Only call the Type-C handler if a
+ * port had been registered previously.
+ */
+ if (priv->port)
+ tusb320_typec_irq_handler(priv, reg);
regmap_write(priv->regmap, TUSB320_REG9, reg);
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 456/731] extcon: usbc-tusb320: Update state on probe even if no IRQ pending
2022-12-28 14:39 ` [PATCH 5.15 456/731] extcon: usbc-tusb320: Update state on probe even if no IRQ pending Greg Kroah-Hartman
@ 2022-12-28 15:45 ` Alvin Šipraga
2022-12-28 21:04 ` Peter Rosin
0 siblings, 1 reply; 763+ messages in thread
From: Alvin Šipraga @ 2022-12-28 15:45 UTC (permalink / raw)
To: Greg Kroah-Hartman, Peter Rosin, Marek Vasut
Cc: stable, patches, Marek Vasut, Heikki Krogerus, Sasha Levin
On Wed, Dec 28, 2022 at 03:39:23PM +0100, Greg Kroah-Hartman wrote:
> From: Marek Vasut <marex@denx.de>
>
> [ Upstream commit 581c848b610dbf3fe1ed4d85fd53d0743c61faba ]
>
> Currently this driver triggers extcon and typec state update in its
> probe function, to read out current state reported by the chip and
> report the correct state to upper layers. This synchronization is
> performed correctly, but only in case the chip indicates a pending
> interrupt in reg09 register.
>
> This fails to cover the situation where all interrupts reported by
> the chip were already handled by Linux before reboot, then the system
> rebooted, and then Linux starts again. In this case, the TUSB320 no
> longer reports any interrupts in reg09, and the state update does not
> perform any update as it depends on that interrupt indication.
>
> Fix this by turning tusb320_irq_handler() into a thin wrapper around
> tusb320_state_update_handler(), where the later now contains the bulk
> of the code of tusb320_irq_handler(), but adds new function parameter
> "force_update". The "force_update" parameter can be used by the probe
> function to assure that the state synchronization is always performed,
> independent of the interrupt indicated in reg09. The interrupt handler
> tusb320_irq_handler() callback uses force_update=false to avoid state
> updates on potential spurious interrupts and retain current behavior.
>
> Fixes: 06bc4ca115cdd ("extcon: Add driver for TI TUSB320")
> Signed-off-by: Marek Vasut <marex@denx.de>
> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Link: https://lore.kernel.org/r/20221120141509.81012-1-marex@denx.de
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
Is the Fixes: tag here actually wrong? There was a regression report here:
https://lore.kernel.org/all/fd0f2d56-495e-6fdd-d1e8-ff40b558101e@axentia.se/
which this patch fixed. But according to the report, it was a regression
introduced by Marek's recent addition of typec support. Since that new
functionality is not normally wanted in stable, can these three tusb320
patches simply be dropped?
Marek, Peter, any thoughts?
Kind regards,
Alvin
> drivers/extcon/extcon-usbc-tusb320.c | 17 ++++++++++++-----
> 1 file changed, 12 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
> index edb8c3f997c9..b0f6e16ab0a9 100644
> --- a/drivers/extcon/extcon-usbc-tusb320.c
> +++ b/drivers/extcon/extcon-usbc-tusb320.c
> @@ -313,9 +313,9 @@ static void tusb320_typec_irq_handler(struct tusb320_priv *priv, u8 reg9)
> typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
> }
>
> -static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
> +static irqreturn_t tusb320_state_update_handler(struct tusb320_priv *priv,
> + bool force_update)
> {
> - struct tusb320_priv *priv = dev_id;
> unsigned int reg;
>
> if (regmap_read(priv->regmap, TUSB320_REG9, ®)) {
> @@ -323,7 +323,7 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
> return IRQ_NONE;
> }
>
> - if (!(reg & TUSB320_REG9_INTERRUPT_STATUS))
> + if (!force_update && !(reg & TUSB320_REG9_INTERRUPT_STATUS))
> return IRQ_NONE;
>
> tusb320_extcon_irq_handler(priv, reg);
> @@ -334,6 +334,13 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> +static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
> +{
> + struct tusb320_priv *priv = dev_id;
> +
> + return tusb320_state_update_handler(priv, false);
> +}
> +
> static const struct regmap_config tusb320_regmap_config = {
> .reg_bits = 8,
> .val_bits = 8,
> @@ -460,7 +467,7 @@ static int tusb320_probe(struct i2c_client *client,
> return ret;
>
> /* update initial state */
> - tusb320_irq_handler(client->irq, priv);
> + tusb320_state_update_handler(priv, true);
>
> /* Reset chip to its default state */
> ret = tusb320_reset(priv);
> @@ -471,7 +478,7 @@ static int tusb320_probe(struct i2c_client *client,
> * State and polarity might change after a reset, so update
> * them again and make sure the interrupt status bit is cleared.
> */
> - tusb320_irq_handler(client->irq, priv);
> + tusb320_state_update_handler(priv, true);
>
> ret = devm_request_threaded_irq(priv->dev, client->irq, NULL,
> tusb320_irq_handler,
> --
> 2.35.1
>
>
>
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 557/731] phy: qcom-qmp: create copies of QMP PHY driver
2022-12-28 14:41 ` [PATCH 5.15 557/731] phy: qcom-qmp: create copies of QMP PHY driver Greg Kroah-Hartman
@ 2022-12-28 16:49 ` Vinod Koul
2022-12-31 11:56 ` Greg Kroah-Hartman
0 siblings, 1 reply; 763+ messages in thread
From: Vinod Koul @ 2022-12-28 16:49 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, Bjorn Andersson, Dmitry Baryshkov, Sasha Levin
On 28-12-22, 15:41, Greg Kroah-Hartman wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>
> [ Upstream commit 94a407cc17a445ddb3f7315cee0b0916d35d177c ]
>
> In order to split and cleanup the single monstrous QMP PHY driver,
> create blind copies of the current file. They will be used for:
> - PCIe (and a separate msm8996 PCIe PHY driver)
> - UFS
> - USB
> - Combo DP + USB
Greg,
Please drop this. This is a full driver rework and code reorg thus not
suitable for stable
Thanks
>
> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Link: https://lore.kernel.org/r/20220607213203.2819885-2-dmitry.baryshkov@linaro.org
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> Stable-dep-of: c7b98de745cf ("phy: qcom-qmp-combo: fix runtime suspend")
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 6350 +++++++++++++++++
> .../phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 6350 +++++++++++++++++
> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 6350 +++++++++++++++++
> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 6350 +++++++++++++++++
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 6350 +++++++++++++++++
> 5 files changed, 31750 insertions(+)
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-usb.c
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> new file mode 100644
> index 000000000000..c7309e981bfb
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -0,0 +1,6350 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +
> +#include <dt-bindings/phy/phy.h>
> +
> +#include "phy-qcom-qmp.h"
> +
> +/* QPHY_SW_RESET bit */
> +#define SW_RESET BIT(0)
> +/* QPHY_POWER_DOWN_CONTROL */
> +#define SW_PWRDN BIT(0)
> +#define REFCLK_DRV_DSBL BIT(1)
> +/* QPHY_START_CONTROL bits */
> +#define SERDES_START BIT(0)
> +#define PCS_START BIT(1)
> +#define PLL_READY_GATE_EN BIT(3)
> +/* QPHY_PCS_STATUS bit */
> +#define PHYSTATUS BIT(6)
> +#define PHYSTATUS_4_20 BIT(7)
> +/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
> +#define PCS_READY BIT(0)
> +
> +/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
> +/* DP PHY soft reset */
> +#define SW_DPPHY_RESET BIT(0)
> +/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
> +#define SW_DPPHY_RESET_MUX BIT(1)
> +/* USB3 PHY soft reset */
> +#define SW_USB3PHY_RESET BIT(2)
> +/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
> +#define SW_USB3PHY_RESET_MUX BIT(3)
> +
> +/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
> +#define USB3_MODE BIT(0) /* enables USB3 mode */
> +#define DP_MODE BIT(1) /* enables DP mode */
> +
> +/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
> +#define ARCVR_DTCT_EN BIT(0)
> +#define ALFPS_DTCT_EN BIT(1)
> +#define ARCVR_DTCT_EVENT_SEL BIT(4)
> +
> +/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
> +#define IRQ_CLEAR BIT(0)
> +
> +/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
> +#define RCVR_DETECT BIT(0)
> +
> +/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
> +#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
> +
> +#define PHY_INIT_COMPLETE_TIMEOUT 10000
> +#define POWER_DOWN_DELAY_US_MIN 10
> +#define POWER_DOWN_DELAY_US_MAX 11
> +
> +#define MAX_PROP_NAME 32
> +
> +/* Define the assumed distance between lanes for underspecified device trees. */
> +#define QMP_PHY_LEGACY_LANE_STRIDE 0x400
> +
> +struct qmp_phy_init_tbl {
> + unsigned int offset;
> + unsigned int val;
> + /*
> + * register part of layout ?
> + * if yes, then offset gives index in the reg-layout
> + */
> + bool in_layout;
> + /*
> + * mask of lanes for which this register is written
> + * for cases when second lane needs different values
> + */
> + u8 lane_mask;
> +};
> +
> +#define QMP_PHY_INIT_CFG(o, v) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .lane_mask = 0xff, \
> + }
> +
> +#define QMP_PHY_INIT_CFG_L(o, v) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .in_layout = true, \
> + .lane_mask = 0xff, \
> + }
> +
> +#define QMP_PHY_INIT_CFG_LANE(o, v, l) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .lane_mask = l, \
> + }
> +
> +/* set of registers with offsets different per-PHY */
> +enum qphy_reg_layout {
> + /* Common block control registers */
> + QPHY_COM_SW_RESET,
> + QPHY_COM_POWER_DOWN_CONTROL,
> + QPHY_COM_START_CONTROL,
> + QPHY_COM_PCS_READY_STATUS,
> + /* PCS registers */
> + QPHY_PLL_LOCK_CHK_DLY_TIME,
> + QPHY_FLL_CNTRL1,
> + QPHY_FLL_CNTRL2,
> + QPHY_FLL_CNT_VAL_L,
> + QPHY_FLL_CNT_VAL_H_TOL,
> + QPHY_FLL_MAN_CODE,
> + QPHY_SW_RESET,
> + QPHY_START_CTRL,
> + QPHY_PCS_READY_STATUS,
> + QPHY_PCS_STATUS,
> + QPHY_PCS_AUTONOMOUS_MODE_CTRL,
> + QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
> + QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
> + QPHY_PCS_POWER_DOWN_CONTROL,
> + /* PCS_MISC registers */
> + QPHY_PCS_MISC_TYPEC_CTRL,
> + /* Keep last to ensure regs_layout arrays are properly initialized */
> + QPHY_LAYOUT_SIZE
> +};
> +
> +static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x168,
> +};
> +
> +static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> +};
> +
> +static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_COM_SW_RESET] = 0x400,
> + [QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
> + [QPHY_COM_START_CONTROL] = 0x408,
> + [QPHY_COM_PCS_READY_STATUS] = 0x448,
> + [QPHY_PLL_LOCK_CHK_DLY_TIME] = 0xa8,
> + [QPHY_FLL_CNTRL1] = 0xc4,
> + [QPHY_FLL_CNTRL2] = 0xc8,
> + [QPHY_FLL_CNT_VAL_L] = 0xcc,
> + [QPHY_FLL_CNT_VAL_H_TOL] = 0xd0,
> + [QPHY_FLL_MAN_CODE] = 0xd4,
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> +};
> +
> +static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_FLL_CNTRL1] = 0xc0,
> + [QPHY_FLL_CNTRL2] = 0xc4,
> + [QPHY_FLL_CNT_VAL_L] = 0xc8,
> + [QPHY_FLL_CNT_VAL_H_TOL] = 0xcc,
> + [QPHY_FLL_MAN_CODE] = 0xd0,
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x17c,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
> +};
> +
> +static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
> +};
> +
> +static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> +};
> +
> +static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x2ac,
> +};
> +
> +static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
> +};
> +
> +static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
> +};
> +
> +static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x1008,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
> +};
> +
> +static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
> + [QPHY_PCS_STATUS] = 0x174,
> + [QPHY_PCS_MISC_TYPEC_CTRL] = 0x00,
> +};
> +
> +static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x160,
> +};
> +
> +static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x168,
> +};
> +
> +static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> +};
> +
> +static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = QPHY_V4_PCS_UFS_PHY_START,
> + [QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_UFS_READY_STATUS,
> + [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET,
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + /* PLL and Loop filter settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + /* SSC settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c),
> + QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> +
> + QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05),
> +
> + QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05),
> + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04),
> + /* PLL and Loop filter settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + /* SSC settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER1, 0x7d),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE0, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x29),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x53),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x61),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
> + QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_EQ_CONFIG5, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
> + QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
> + QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> + QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
> + QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_POST, 0x58),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
> + QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
> + QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
> + QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
> + QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
> + QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x007),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_01, 0x59),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xbb),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG4, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2, 0x52),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4, 0x1a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5, 0x06),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SYSCLK_EN_SEL, 0x27),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BIAS_EN_CKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_ENABLE1, 0xb0),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE0, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_RESTRIM_CTRL2, 0x05),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VCO_TUNE_MAP, 0x10),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_SELECT, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_HSCLK_SEL1, 0x30),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORE_CLK_EN, 0x73),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SVS_MODE_CLK_SEL, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV1, 0x22),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV2, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BGV_TRIM, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BG_CTRL, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL0, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_TAP_EN, 0x0d),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TX_BAND_MODE, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_LANE_MODE, 0x1a),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PARALLEL_RATE, 0x2f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE0, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE1, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE2, 0x1b),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE2, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE0, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE1, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE2, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_THRESH_DFE, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CGA_THRESH_DFE, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXENGINE_EN0, 0x12),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_TRAIN_TIME, 0x25),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_DFE_OVRLP_TIME, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_REFRESH_TIME, 0x05),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_ENABLE_TIME, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_GAIN, 0x26),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_GAIN, 0x12),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_OFFSET_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PRE_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_INTVAL, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EDAC_INITVAL, 0x28),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB0, 0x7f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB1, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RCVRDONE_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_CTRL, 0x70),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE0, 0x8b),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE2, 0x0a),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE2, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_BAND, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE0, 0x5c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE1, 0x3e),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE2, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_ENABLES, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_CNTRL, 0xa0),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_DEGLITCH_CNTRL, 0x08),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DCC_GAIN, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_EN_SIGNAL, 0xc3),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PSM_RX_EN_CAL, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_MISC_CNTRL0, 0xbc),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TS0_TIMER, 0x7f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DLL_HIGHDATARATE, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RESETCODE_OFFSET, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_INITVAL, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RSM_START, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_rx_tbl[] = {
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_PCS_TX_RX_CONFIG, 0x50),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M3P5DB, 0x19),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M3P5DB, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M6DB, 0x17),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M6DB, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG5, 0x9f),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x50),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb5),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4c),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x64),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x1E),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0D),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5B),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_RX_PWM_GEAR_BAND, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_DRV_LVL, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),
> + QMP_PHY_INIT_CFG(QPHY_RX_SYM_RESYNC_CTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_POST_EMP_LVL, 0x12),
> + QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_POST_EMP_LVL, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL2, 0x6e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SYM_RESYNC_CTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL1, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_MIN_HIBERN8_TIME, 0x9a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
> +
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x94),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> +
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x5),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x6e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x39),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x39),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x35),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P6_P7_PRE, 0x33),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_EQ_CONFIG2, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x05),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG2, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x26),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x048),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x46),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_CFG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x50),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MISC1, 0x88),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTERNAL_DIG_CORECLK_DIV, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MODE, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_DC_LEVEL_CTRL, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x56),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x22),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_3, 0x13),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_VMODE_CTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_PI_QEC_CTRL, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_FO_GAIN_RATE2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_UCDR_PI_CONTROLS, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_3, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_VGA_CAL_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x27),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2, 0x5a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B0, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B1, 0xf9),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B3, 0xce),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B4, 0x62),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B0, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B1, 0x7d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B3, 0xcf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B4, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_PHPRE_CTRL, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_MARG_COARSE_CTRL2, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG2, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG4, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG5, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_EQ_CONFIG1, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G3_RXEQEVAL_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_RXEQEVAL_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG2, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0b),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x65),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xf5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf1),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x6d),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x6d),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xed),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x3c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xb7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0xb7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_INITVAL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_EQ_CONFIG2, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x46),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_CFG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0xd0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MISC1, 0x88),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_DC_LEVEL_CTRL, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xcc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xcc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x29),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0xc5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xad),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xb6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xc7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xef),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x81),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x05),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
> +};
> +
> +/* Register names should be validated, they might be different for this PHY */
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_EQ_CONFIG1, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3, 0x28),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
> +};
> +
> +struct qmp_phy;
> +
> +/* struct qmp_phy_cfg - per-PHY initialization config */
> +struct qmp_phy_cfg {
> + /* phy-type - PCIE/UFS/USB */
> + unsigned int type;
> + /* number of lanes provided by phy */
> + int nlanes;
> +
> + /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
> + const struct qmp_phy_init_tbl *serdes_tbl;
> + int serdes_tbl_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_sec;
> + int serdes_tbl_num_sec;
> + const struct qmp_phy_init_tbl *tx_tbl;
> + int tx_tbl_num;
> + const struct qmp_phy_init_tbl *tx_tbl_sec;
> + int tx_tbl_num_sec;
> + const struct qmp_phy_init_tbl *rx_tbl;
> + int rx_tbl_num;
> + const struct qmp_phy_init_tbl *rx_tbl_sec;
> + int rx_tbl_num_sec;
> + const struct qmp_phy_init_tbl *pcs_tbl;
> + int pcs_tbl_num;
> + const struct qmp_phy_init_tbl *pcs_tbl_sec;
> + int pcs_tbl_num_sec;
> + const struct qmp_phy_init_tbl *pcs_misc_tbl;
> + int pcs_misc_tbl_num;
> + const struct qmp_phy_init_tbl *pcs_misc_tbl_sec;
> + int pcs_misc_tbl_num_sec;
> +
> + /* Init sequence for DP PHY block link rates */
> + const struct qmp_phy_init_tbl *serdes_tbl_rbr;
> + int serdes_tbl_rbr_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr;
> + int serdes_tbl_hbr_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr2;
> + int serdes_tbl_hbr2_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
> + int serdes_tbl_hbr3_num;
> +
> + /* DP PHY callbacks */
> + int (*configure_dp_phy)(struct qmp_phy *qphy);
> + void (*configure_dp_tx)(struct qmp_phy *qphy);
> + int (*calibrate_dp_phy)(struct qmp_phy *qphy);
> + void (*dp_aux_init)(struct qmp_phy *qphy);
> +
> + /* clock ids to be requested */
> + const char * const *clk_list;
> + int num_clks;
> + /* resets to be requested */
> + const char * const *reset_list;
> + int num_resets;
> + /* regulators to be requested */
> + const char * const *vreg_list;
> + int num_vregs;
> +
> + /* array of registers with different offsets */
> + const unsigned int *regs;
> +
> + unsigned int start_ctrl;
> + unsigned int pwrdn_ctrl;
> + unsigned int mask_com_pcs_ready;
> + /* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
> + unsigned int phy_status;
> +
> + /* true, if PHY has a separate PHY_COM control block */
> + bool has_phy_com_ctrl;
> + /* true, if PHY has a reset for individual lanes */
> + bool has_lane_rst;
> + /* true, if PHY needs delay after POWER_DOWN */
> + bool has_pwrdn_delay;
> + /* power_down delay in usec */
> + int pwrdn_delay_min;
> + int pwrdn_delay_max;
> +
> + /* true, if PHY has a separate DP_COM control block */
> + bool has_phy_dp_com_ctrl;
> + /* true, if PHY has secondary tx/rx lanes to be configured */
> + bool is_dual_lane_phy;
> +
> + /* true, if PCS block has no separate SW_RESET register */
> + bool no_pcs_sw_reset;
> +};
> +
> +struct qmp_phy_combo_cfg {
> + const struct qmp_phy_cfg *usb_cfg;
> + const struct qmp_phy_cfg *dp_cfg;
> +};
> +
> +/**
> + * struct qmp_phy - per-lane phy descriptor
> + *
> + * @phy: generic phy
> + * @cfg: phy specific configuration
> + * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
> + * @tx: iomapped memory space for lane's tx
> + * @rx: iomapped memory space for lane's rx
> + * @pcs: iomapped memory space for lane's pcs
> + * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
> + * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> + * @pcs_misc: iomapped memory space for lane's pcs_misc
> + * @pipe_clk: pipe clock
> + * @index: lane index
> + * @qmp: QMP phy to which this lane belongs
> + * @lane_rst: lane's reset controller
> + * @mode: current PHY mode
> + * @dp_aux_cfg: Display port aux config
> + * @dp_opts: Display port optional config
> + * @dp_clks: Display port clocks
> + */
> +struct qmp_phy {
> + struct phy *phy;
> + const struct qmp_phy_cfg *cfg;
> + void __iomem *serdes;
> + void __iomem *tx;
> + void __iomem *rx;
> + void __iomem *pcs;
> + void __iomem *tx2;
> + void __iomem *rx2;
> + void __iomem *pcs_misc;
> + struct clk *pipe_clk;
> + unsigned int index;
> + struct qcom_qmp *qmp;
> + struct reset_control *lane_rst;
> + enum phy_mode mode;
> + unsigned int dp_aux_cfg;
> + struct phy_configure_opts_dp dp_opts;
> + struct qmp_phy_dp_clks *dp_clks;
> +};
> +
> +struct qmp_phy_dp_clks {
> + struct qmp_phy *qphy;
> + struct clk_hw dp_link_hw;
> + struct clk_hw dp_pixel_hw;
> +};
> +
> +/**
> + * struct qcom_qmp - structure holding QMP phy block attributes
> + *
> + * @dev: device
> + * @dp_com: iomapped memory space for phy's dp_com control block
> + *
> + * @clks: array of clocks required by phy
> + * @resets: array of resets required by phy
> + * @vregs: regulator supplies bulk data
> + *
> + * @phys: array of per-lane phy descriptors
> + * @phy_mutex: mutex lock for PHY common block initialization
> + * @init_count: phy common block initialization count
> + * @ufs_reset: optional UFS PHY reset handle
> + */
> +struct qcom_qmp {
> + struct device *dev;
> + void __iomem *dp_com;
> +
> + struct clk_bulk_data *clks;
> + struct reset_control **resets;
> + struct regulator_bulk_data *vregs;
> +
> + struct qmp_phy **phys;
> +
> + struct mutex phy_mutex;
> + int init_count;
> +
> + struct reset_control *ufs_reset;
> +};
> +
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
> +
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
> +
> +static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> +{
> + u32 reg;
> +
> + reg = readl(base + offset);
> + reg |= val;
> + writel(reg, base + offset);
> +
> + /* ensure that above write is through */
> + readl(base + offset);
> +}
> +
> +static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
> +{
> + u32 reg;
> +
> + reg = readl(base + offset);
> + reg &= ~val;
> + writel(reg, base + offset);
> +
> + /* ensure that above write is through */
> + readl(base + offset);
> +}
> +
> +/* list of clocks required by phy */
> +static const char * const msm8996_phy_clk_l[] = {
> + "aux", "cfg_ahb", "ref",
> +};
> +
> +static const char * const msm8996_ufs_phy_clk_l[] = {
> + "ref",
> +};
> +
> +static const char * const qmp_v3_phy_clk_l[] = {
> + "aux", "cfg_ahb", "ref", "com_aux",
> +};
> +
> +static const char * const sdm845_pciephy_clk_l[] = {
> + "aux", "cfg_ahb", "ref", "refgen",
> +};
> +
> +static const char * const qmp_v4_phy_clk_l[] = {
> + "aux", "ref_clk_src", "ref", "com_aux",
> +};
> +
> +/* the primary usb3 phy on sm8250 doesn't have a ref clock */
> +static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
> + "aux", "ref_clk_src", "com_aux"
> +};
> +
> +static const char * const sm8450_ufs_phy_clk_l[] = {
> + "qref", "ref", "ref_aux",
> +};
> +
> +static const char * const sdm845_ufs_phy_clk_l[] = {
> + "ref", "ref_aux",
> +};
> +
> +/* usb3 phy on sdx55 doesn't have com_aux clock */
> +static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
> + "aux", "cfg_ahb", "ref"
> +};
> +
> +static const char * const qcm2290_usb3phy_clk_l[] = {
> + "cfg_ahb", "ref", "com_aux",
> +};
> +
> +/* list of resets */
> +static const char * const msm8996_pciephy_reset_l[] = {
> + "phy", "common", "cfg",
> +};
> +
> +static const char * const msm8996_usb3phy_reset_l[] = {
> + "phy", "common",
> +};
> +
> +static const char * const sc7180_usb3phy_reset_l[] = {
> + "phy",
> +};
> +
> +static const char * const qcm2290_usb3phy_reset_l[] = {
> + "phy_phy", "phy",
> +};
> +
> +static const char * const sdm845_pciephy_reset_l[] = {
> + "phy",
> +};
> +
> +/* list of regulators */
> +static const char * const qmp_phy_vreg_l[] = {
> + "vdda-phy", "vdda-pll",
> +};
> +
> +static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq8074_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
> + .tx_tbl = msm8996_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
> + .rx_tbl = ipq8074_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq8074_usb3_rx_tbl),
> + .pcs_tbl = ipq8074_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq8074_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 3,
> +
> + .serdes_tbl = msm8996_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl),
> + .tx_tbl = msm8996_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl),
> + .rx_tbl = msm8996_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl),
> + .pcs_tbl = msm8996_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | PLL_READY_GATE_EN,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .mask_com_pcs_ready = PCS_READY,
> + .phy_status = PHYSTATUS,
> +
> + .has_phy_com_ctrl = true,
> + .has_lane_rst = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_ufs_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8996_ufs_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes_tbl),
> + .tx_tbl = msm8996_ufs_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx_tbl),
> + .rx_tbl = msm8996_ufs_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx_tbl),
> +
> + .clk_list = msm8996_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l),
> +
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> +
> + .regs = msm8996_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8996_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl),
> + .tx_tbl = msm8996_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
> + .rx_tbl = msm8996_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_usb3_rx_tbl),
> + .pcs_tbl = msm8996_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8996_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const char * const ipq8074_pciephy_clk_l[] = {
> + "aux", "cfg_ahb",
> +};
> +/* list of resets */
> +static const char * const ipq8074_pciephy_reset_l[] = {
> + "phy", "common",
> +};
> +
> +static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq8074_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
> + .tx_tbl = ipq8074_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_tx_tbl),
> + .rx_tbl = ipq8074_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
> + .pcs_tbl = ipq8074_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
> + .clk_list = ipq8074_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = NULL,
> + .num_vregs = 0,
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_phy_com_ctrl = false,
> + .has_lane_rst = false,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq6018_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
> + .tx_tbl = ipq6018_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(ipq6018_pcie_tx_tbl),
> + .rx_tbl = ipq6018_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
> + .pcs_tbl = ipq6018_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
> + .clk_list = ipq8074_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = NULL,
> + .num_vregs = 0,
> + .regs = ipq_pciephy_gen3_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> +
> + .has_phy_com_ctrl = false,
> + .has_lane_rst = false,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sdm845_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_serdes_tbl),
> + .tx_tbl = sdm845_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_tx_tbl),
> + .rx_tbl = sdm845_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_rx_tbl),
> + .pcs_tbl = sdm845_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sdm845_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_qmp_pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sdm845_qhp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_serdes_tbl),
> + .tx_tbl = sdm845_qhp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_tx_tbl),
> + .rx_tbl = sdm845_qhp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_rx_tbl),
> + .pcs_tbl = sdm845_qhp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_pcs_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_qhp_pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
> + .serdes_tbl_sec = sm8250_qmp_gen3x1_pcie_serdes_tbl,
> + .serdes_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_serdes_tbl),
> + .tx_tbl = sm8250_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
> + .rx_tbl = sm8250_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
> + .rx_tbl_sec = sm8250_qmp_gen3x1_pcie_rx_tbl,
> + .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_rx_tbl),
> + .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
> + .pcs_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_tbl,
> + .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
> + .pcs_misc_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
> + .tx_tbl = sm8250_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
> + .tx_tbl_sec = sm8250_qmp_gen3x2_pcie_tx_tbl,
> + .tx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_tx_tbl),
> + .rx_tbl = sm8250_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
> + .rx_tbl_sec = sm8250_qmp_gen3x2_pcie_rx_tbl,
> + .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_rx_tbl),
> + .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
> + .pcs_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_tbl,
> + .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
> + .pcs_misc_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> + .tx_tbl = qmp_v3_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
> + .usb_cfg = &sc7180_usb3phy_cfg,
> + .dp_cfg = &sc7180_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sdm845_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
> + .tx_tbl = sdm845_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
> + .rx_tbl = sdm845_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
> + .pcs_tbl = sdm845_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm6115_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
> + .tx_tbl = sm6115_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
> + .rx_tbl = sm6115_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
> + .pcs_tbl = sm6115_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm6115_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> +
> + .is_dual_lane_phy = false,
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8998_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl),
> + .tx_tbl = msm8998_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8998_pcie_tx_tbl),
> + .rx_tbl = msm8998_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8998_pcie_rx_tbl),
> + .pcs_tbl = msm8998_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8998_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
> + .tx_tbl = msm8998_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8998_usb3_tx_tbl),
> + .rx_tbl = msm8998_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
> + .pcs_tbl = msm8998_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8150_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
> + .tx_tbl = sm8150_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
> + .rx_tbl = sm8150_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
> + .pcs_tbl = sm8150_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8150_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_tx_tbl),
> + .rx_tbl = sm8150_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
> + .pcs_tbl = sm8150_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sc8180x_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_serdes_tbl),
> + .tx_tbl = sc8180x_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl),
> + .rx_tbl = sc8180x_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_rx_tbl),
> + .pcs_tbl = sc8180x_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sc8180x_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v4_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> + .tx_tbl = qmp_v4_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
> + .usb_cfg = &sm8150_usb3phy_cfg,
> + .dp_cfg = &sc8180x_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8150_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8150_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8250_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_tx_tbl),
> + .rx_tbl = sm8250_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
> + .pcs_tbl = sm8250_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8250_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8250_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v4_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> + .tx_tbl = qmp_v4_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
> + .usb_cfg = &sm8250_usb3phy_cfg,
> + .dp_cfg = &sm8250_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sdx55_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_tx_tbl),
> + .rx_tbl = sdx55_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_sdx55_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sdx55_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_serdes_tbl),
> + .tx_tbl = sdx55_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_tx_tbl),
> + .rx_tbl = sdx55_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_rx_tbl),
> + .pcs_tbl = sdx55_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sdx55_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS_4_20,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sdx65_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_tx_tbl),
> + .rx_tbl = sdx65_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_sdx55_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8350_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8350_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
> + .tx_tbl = sm8350_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
> + .rx_tbl = sm8350_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
> + .pcs_tbl = sm8350_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8350_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_tx_tbl),
> + .rx_tbl = sm8350_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl),
> + .pcs_tbl = sm8350_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl),
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8350_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8350_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8350_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8350_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
> + .tx_tbl = sm8350_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
> + .rx_tbl = sm8350_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
> + .pcs_tbl = sm8350_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
> + .clk_list = sm8450_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8450_qmp_gen3x1_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl),
> + .tx_tbl = sm8450_qmp_gen3x1_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl),
> + .rx_tbl = sm8450_qmp_gen3x1_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl),
> + .pcs_tbl = sm8450_qmp_gen3x1_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8450_qmp_gen4x2_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_serdes_tbl),
> + .tx_tbl = sm8450_qmp_gen4x2_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_tx_tbl),
> + .rx_tbl = sm8450_qmp_gen4x2_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_rx_tbl),
> + .pcs_tbl = sm8450_qmp_gen4x2_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8450_qmp_gen4x2_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS_4_20,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qcm2290_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
> + .tx_tbl = qcm2290_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qcm2290_usb3_tx_tbl),
> + .rx_tbl = qcm2290_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qcm2290_usb3_rx_tbl),
> + .pcs_tbl = qcm2290_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
> + .clk_list = qcm2290_usb3phy_clk_l,
> + .num_clks = ARRAY_SIZE(qcm2290_usb3phy_clk_l),
> + .reset_list = qcm2290_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qcm2290_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static void qcom_qmp_phy_configure_lane(void __iomem *base,
> + const unsigned int *regs,
> + const struct qmp_phy_init_tbl tbl[],
> + int num,
> + u8 lane_mask)
> +{
> + int i;
> + const struct qmp_phy_init_tbl *t = tbl;
> +
> + if (!t)
> + return;
> +
> + for (i = 0; i < num; i++, t++) {
> + if (!(t->lane_mask & lane_mask))
> + continue;
> +
> + if (t->in_layout)
> + writel(t->val, base + regs[t->offset]);
> + else
> + writel(t->val, base + t->offset);
> + }
> +}
> +
> +static void qcom_qmp_phy_configure(void __iomem *base,
> + const unsigned int *regs,
> + const struct qmp_phy_init_tbl tbl[],
> + int num)
> +{
> + qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff);
> +}
> +
> +static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
> + int serdes_tbl_num = cfg->serdes_tbl_num;
> + int ret;
> +
> + qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
> + if (cfg->serdes_tbl_sec)
> + qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
> + cfg->serdes_tbl_num_sec);
> +
> + if (cfg->type == PHY_TYPE_DP) {
> + switch (dp_opts->link_rate) {
> + case 1620:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_rbr,
> + cfg->serdes_tbl_rbr_num);
> + break;
> + case 2700:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr,
> + cfg->serdes_tbl_hbr_num);
> + break;
> + case 5400:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr2,
> + cfg->serdes_tbl_hbr2_num);
> + break;
> + case 8100:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr3,
> + cfg->serdes_tbl_hbr3_num);
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + }
> +
> +
> + if (cfg->has_phy_com_ctrl) {
> + void __iomem *status;
> + unsigned int mask, val;
> +
> + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
> + SERDES_START | PCS_START);
> +
> + status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
> + mask = cfg->mask_com_pcs_ready;
> +
> + ret = readl_poll_timeout(status, val, (val & mask), 10,
> + PHY_INIT_COMPLETE_TIMEOUT);
> + if (ret) {
> + dev_err(qmp->dev,
> + "phy common block init timed-out\n");
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + /* Turn on BIAS current for PHY/PLL */
> + writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
> + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
> + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_LANE_0_1_PWRDN |
> + DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
> + DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(QSERDES_V3_COM_BIAS_EN |
> + QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
> + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
> + QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
> + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0x24, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
> + writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
> + writel(0xbb, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
> + qphy->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
> + { 0x00, 0x0c, 0x15, 0x1a },
> + { 0x02, 0x0e, 0x16, 0xff },
> + { 0x02, 0x11, 0xff, 0xff },
> + { 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
> + { 0x02, 0x12, 0x16, 0x1a },
> + { 0x09, 0x19, 0x1f, 0xff },
> + { 0x10, 0x1f, 0xff, 0xff },
> + { 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> + { 0x00, 0x0c, 0x14, 0x19 },
> + { 0x00, 0x0b, 0x12, 0xff },
> + { 0x00, 0x0b, 0xff, 0xff },
> + { 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
> + { 0x08, 0x0f, 0x16, 0x1f },
> + { 0x11, 0x1e, 0x1f, 0xff },
> + { 0x19, 0x1f, 0xff, 0xff },
> + { 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
> + unsigned int drv_lvl_reg, unsigned int emp_post_reg)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + unsigned int v_level = 0, p_level = 0;
> + u8 voltage_swing_cfg, pre_emphasis_cfg;
> + int i;
> +
> + for (i = 0; i < dp_opts->lanes; i++) {
> + v_level = max(v_level, dp_opts->voltage[i]);
> + p_level = max(p_level, dp_opts->pre[i]);
> + }
> +
> + if (dp_opts->link_rate <= 2700) {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> + } else {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
> + }
> +
> + /* TODO: Move check to config check */
> + if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> + return -EINVAL;
> +
> + /* Enable MUX to use Cursor values from these registers */
> + voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> + pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> +
> + writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
> + writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
> + writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
> + writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 bias_en, drvr_en;
> +
> + if (qcom_qmp_phy_configure_dp_swing(qphy,
> + QSERDES_V3_TX_TX_DRV_LVL,
> + QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
> + return;
> +
> + if (dp_opts->lanes == 1) {
> + bias_en = 0x3e;
> + drvr_en = 0x13;
> + } else {
> + bias_en = 0x3f;
> + drvr_en = 0x10;
> + }
> +
> + writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> + writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> +}
> +
> +static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy)
> +{
> + u32 val;
> + bool reverse = false;
> +
> + val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
> +
> + /*
> + * TODO: Assume orientation is CC1 for now and two lanes, need to
> + * use type-c connector to understand orientation and lanes.
> + *
> + * Otherwise val changes to be like below if this code understood
> + * the orientation of the type-c cable.
> + *
> + * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
> + * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
> + * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
> + * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> + * if (orientation == ORIENTATION_CC2)
> + * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> + */
> + val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> + writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
> +
> + return reverse;
> +}
> +
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 phy_vco_div, status;
> + unsigned long pixel_freq;
> +
> + qcom_qmp_phy_configure_dp_mode(qphy);
> +
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> + writel(0x04, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
> + udelay(2000);
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000);
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> + static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
> + u8 val;
> +
> + qphy->dp_aux_cfg++;
> + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[qphy->dp_aux_cfg];
> +
> + writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + /* Turn on BIAS current for PHY/PLL */
> + writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
> + writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
> + writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
> + qphy->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + /* Program default values before writing proper values */
> + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +
> + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +
> + qcom_qmp_phy_configure_dp_swing(qphy,
> + QSERDES_V4_TX_TX_DRV_LVL,
> + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +}
> +
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 phy_vco_div, status;
> + unsigned long pixel_freq;
> + u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
> + bool reverse;
> +
> + writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
> +
> + reverse = qcom_qmp_phy_configure_dp_mode(qphy);
> +
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> +
> + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + /*
> + * At least for 7nm DP PHY this has to be done after enabling link
> + * clock.
> + */
> +
> + if (dp_opts->lanes == 1) {
> + bias0_en = reverse ? 0x3e : 0x15;
> + bias1_en = reverse ? 0x15 : 0x3e;
> + drvr0_en = reverse ? 0x13 : 0x10;
> + drvr1_en = reverse ? 0x10 : 0x13;
> + } else if (dp_opts->lanes == 2) {
> + bias0_en = reverse ? 0x3f : 0x15;
> + bias1_en = reverse ? 0x15 : 0x3f;
> + drvr0_en = 0x10;
> + drvr1_en = 0x10;
> + } else {
> + bias0_en = 0x3f;
> + bias1_en = 0x3f;
> + drvr0_en = 0x10;
> + drvr1_en = 0x10;
> + }
> +
> + writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
> + writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
> + writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
> + writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
> +
> + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
> + udelay(2000);
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
> + writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
> +
> + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +
> + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +
> + return 0;
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> + static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
> + u8 val;
> +
> + qphy->dp_aux_cfg++;
> + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[qphy->dp_aux_cfg];
> +
> + writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &opts->dp;
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
> + if (qphy->dp_opts.set_voltages) {
> + cfg->configure_dp_tx(qphy);
> + qphy->dp_opts.set_voltages = 0;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + if (cfg->calibrate_dp_phy)
> + return cfg->calibrate_dp_phy(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *dp_com = qmp->dp_com;
> + int ret, i;
> +
> + mutex_lock(&qmp->phy_mutex);
> + if (qmp->init_count++) {
> + mutex_unlock(&qmp->phy_mutex);
> + return 0;
> + }
> +
> + /* turn on regulator supplies */
> + ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
> + if (ret) {
> + dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
> + goto err_unlock;
> + }
> +
> + for (i = 0; i < cfg->num_resets; i++) {
> + ret = reset_control_assert(qmp->resets[i]);
> + if (ret) {
> + dev_err(qmp->dev, "%s reset assert failed\n",
> + cfg->reset_list[i]);
> + goto err_disable_regulators;
> + }
> + }
> +
> + for (i = cfg->num_resets - 1; i >= 0; i--) {
> + ret = reset_control_deassert(qmp->resets[i]);
> + if (ret) {
> + dev_err(qmp->dev, "%s reset deassert failed\n",
> + qphy->cfg->reset_list[i]);
> + goto err_assert_reset;
> + }
> + }
> +
> + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
> + if (ret)
> + goto err_assert_reset;
> +
> + if (cfg->has_phy_dp_com_ctrl) {
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
> + SW_PWRDN);
> + /* override hardware control for reset of qmp phy */
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +
> + /* Default type-c orientation, i.e CC1 */
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
> +
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
> + USB3_MODE | DP_MODE);
> +
> + /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
> + }
> +
> + if (cfg->has_phy_com_ctrl) {
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
> + SW_PWRDN);
> + } else {
> + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
> + qphy_setbits(pcs,
> + cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> + cfg->pwrdn_ctrl);
> + else
> + qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL,
> + cfg->pwrdn_ctrl);
> + }
> +
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +
> +err_assert_reset:
> + while (++i < cfg->num_resets)
> + reset_control_assert(qmp->resets[i]);
> +err_disable_regulators:
> + regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> +err_unlock:
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + int i = cfg->num_resets;
> +
> + mutex_lock(&qmp->phy_mutex);
> + if (--qmp->init_count) {
> + mutex_unlock(&qmp->phy_mutex);
> + return 0;
> + }
> +
> + reset_control_assert(qmp->ufs_reset);
> + if (cfg->has_phy_com_ctrl) {
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
> + SERDES_START | PCS_START);
> + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET],
> + SW_RESET);
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
> + SW_PWRDN);
> + }
> +
> + while (--i >= 0)
> + reset_control_assert(qmp->resets[i]);
> +
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> +
> + regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> +
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_init(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + int ret;
> + dev_vdbg(qmp->dev, "Initializing QMP phy\n");
> +
> + if (cfg->no_pcs_sw_reset) {
> + /*
> + * Get UFS reset, which is delayed until now to avoid a
> + * circular dependency where UFS needs its PHY, but the PHY
> + * needs this UFS reset.
> + */
> + if (!qmp->ufs_reset) {
> + qmp->ufs_reset =
> + devm_reset_control_get_exclusive(qmp->dev,
> + "ufsphy");
> +
> + if (IS_ERR(qmp->ufs_reset)) {
> + ret = PTR_ERR(qmp->ufs_reset);
> + dev_err(qmp->dev,
> + "failed to get UFS reset: %d\n",
> + ret);
> +
> + qmp->ufs_reset = NULL;
> + return ret;
> + }
> + }
> +
> + ret = reset_control_assert(qmp->ufs_reset);
> + if (ret)
> + return ret;
> + }
> +
> + ret = qcom_qmp_phy_com_init(qphy);
> + if (ret)
> + return ret;
> +
> + if (cfg->type == PHY_TYPE_DP)
> + cfg->dp_aux_init(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_power_on(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *tx = qphy->tx;
> + void __iomem *rx = qphy->rx;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> + void __iomem *status;
> + unsigned int mask, val, ready;
> + int ret;
> +
> + qcom_qmp_phy_serdes_init(qphy);
> +
> + if (cfg->has_lane_rst) {
> + ret = reset_control_deassert(qphy->lane_rst);
> + if (ret) {
> + dev_err(qmp->dev, "lane%d reset deassert failed\n",
> + qphy->index);
> + return ret;
> + }
> + }
> +
> + ret = clk_prepare_enable(qphy->pipe_clk);
> + if (ret) {
> + dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
> + goto err_reset_lane;
> + }
> +
> + /* Tx, Rx, and PCS configurations */
> + qcom_qmp_phy_configure_lane(tx, cfg->regs,
> + cfg->tx_tbl, cfg->tx_tbl_num, 1);
> + if (cfg->tx_tbl_sec)
> + qcom_qmp_phy_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
> + cfg->tx_tbl_num_sec, 1);
> +
> + /* Configuration for other LANE for USB-DP combo PHY */
> + if (cfg->is_dual_lane_phy) {
> + qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
> + cfg->tx_tbl, cfg->tx_tbl_num, 2);
> + if (cfg->tx_tbl_sec)
> + qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
> + cfg->tx_tbl_sec,
> + cfg->tx_tbl_num_sec, 2);
> + }
> +
> + /* Configure special DP tx tunings */
> + if (cfg->type == PHY_TYPE_DP)
> + cfg->configure_dp_tx(qphy);
> +
> + qcom_qmp_phy_configure_lane(rx, cfg->regs,
> + cfg->rx_tbl, cfg->rx_tbl_num, 1);
> + if (cfg->rx_tbl_sec)
> + qcom_qmp_phy_configure_lane(rx, cfg->regs,
> + cfg->rx_tbl_sec, cfg->rx_tbl_num_sec, 1);
> +
> + if (cfg->is_dual_lane_phy) {
> + qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
> + cfg->rx_tbl, cfg->rx_tbl_num, 2);
> + if (cfg->rx_tbl_sec)
> + qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
> + cfg->rx_tbl_sec,
> + cfg->rx_tbl_num_sec, 2);
> + }
> +
> + /* Configure link rate, swing, etc. */
> + if (cfg->type == PHY_TYPE_DP) {
> + cfg->configure_dp_phy(qphy);
> + } else {
> + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
> + if (cfg->pcs_tbl_sec)
> + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
> + cfg->pcs_tbl_num_sec);
> + }
> +
> + ret = reset_control_deassert(qmp->ufs_reset);
> + if (ret)
> + goto err_disable_pipe_clk;
> +
> + qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
> + cfg->pcs_misc_tbl_num);
> + if (cfg->pcs_misc_tbl_sec)
> + qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
> + cfg->pcs_misc_tbl_num_sec);
> +
> + /*
> + * Pull out PHY from POWER DOWN state.
> + * This is active low enable signal to power-down PHY.
> + */
> + if(cfg->type == PHY_TYPE_PCIE)
> + qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
> +
> + if (cfg->has_pwrdn_delay)
> + usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
> +
> + if (cfg->type != PHY_TYPE_DP) {
> + /* Pull PHY out of reset state */
> + if (!cfg->no_pcs_sw_reset)
> + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> + /* start SerDes and Phy-Coding-Sublayer */
> + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> +
> + if (cfg->type == PHY_TYPE_UFS) {
> + status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
> + mask = PCS_READY;
> + ready = PCS_READY;
> + } else {
> + status = pcs + cfg->regs[QPHY_PCS_STATUS];
> + mask = cfg->phy_status;
> + ready = 0;
> + }
> +
> + ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
> + PHY_INIT_COMPLETE_TIMEOUT);
> + if (ret) {
> + dev_err(qmp->dev, "phy initialization timed-out\n");
> + goto err_disable_pipe_clk;
> + }
> + }
> + return 0;
> +
> +err_disable_pipe_clk:
> + clk_disable_unprepare(qphy->pipe_clk);
> +err_reset_lane:
> + if (cfg->has_lane_rst)
> + reset_control_assert(qphy->lane_rst);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_power_off(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + clk_disable_unprepare(qphy->pipe_clk);
> +
> + if (cfg->type == PHY_TYPE_DP) {
> + /* Assert DP PHY power down */
> + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> + } else {
> + /* PHY reset */
> + if (!cfg->no_pcs_sw_reset)
> + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> +
> + /* stop SerDes and Phy-Coding-Sublayer */
> + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> +
> + /* Put PHY into POWER DOWN state: active low */
> + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
> + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> + cfg->pwrdn_ctrl);
> + } else {
> + qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL,
> + cfg->pwrdn_ctrl);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_exit(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + if (cfg->has_lane_rst)
> + reset_control_assert(qphy->lane_rst);
> +
> + qcom_qmp_phy_com_exit(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_enable(struct phy *phy)
> +{
> + int ret;
> +
> + ret = qcom_qmp_phy_init(phy);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_power_on(phy);
> + if (ret)
> + qcom_qmp_phy_exit(phy);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_disable(struct phy *phy)
> +{
> + int ret;
> +
> + ret = qcom_qmp_phy_power_off(phy);
> + if (ret)
> + return ret;
> + return qcom_qmp_phy_exit(phy);
> +}
> +
> +static int qcom_qmp_phy_set_mode(struct phy *phy,
> + enum phy_mode mode, int submode)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> +
> + qphy->mode = mode;
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> + u32 intr_mask;
> +
> + if (qphy->mode == PHY_MODE_USB_HOST_SS ||
> + qphy->mode == PHY_MODE_USB_DEVICE_SS)
> + intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
> + else
> + intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
> +
> + /* Clear any pending interrupts status */
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> + /* Writing 1 followed by 0 clears the interrupt */
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> +
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
> + ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
> +
> + /* Enable required PHY autonomous mode interrupts */
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
> +
> + /* Enable i/o clamp_n for autonomous mode */
> + if (pcs_misc)
> + qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
> +}
> +
> +static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> +
> + /* Disable i/o clamp_n on resume for normal mode */
> + if (pcs_misc)
> + qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
> +
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
> + ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
> +
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> + /* Writing 1 followed by 0 clears the interrupt */
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> +}
> +
> +static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct qmp_phy *qphy = qmp->phys[0];
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
> +
> + /* Supported only for USB3 PHY and luckily USB3 is the first phy */
> + if (cfg->type != PHY_TYPE_USB3)
> + return 0;
> +
> + if (!qmp->init_count) {
> + dev_vdbg(dev, "PHY not initialized, bailing out\n");
> + return 0;
> + }
> +
> + qcom_qmp_phy_enable_autonomous_mode(qphy);
> +
> + clk_disable_unprepare(qphy->pipe_clk);
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct qmp_phy *qphy = qmp->phys[0];
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + int ret = 0;
> +
> + dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
> +
> + /* Supported only for USB3 PHY and luckily USB3 is the first phy */
> + if (cfg->type != PHY_TYPE_USB3)
> + return 0;
> +
> + if (!qmp->init_count) {
> + dev_vdbg(dev, "PHY not initialized, bailing out\n");
> + return 0;
> + }
> +
> + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(qphy->pipe_clk);
> + if (ret) {
> + dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> + return ret;
> + }
> +
> + qcom_qmp_phy_disable_autonomous_mode(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int num = cfg->num_vregs;
> + int i;
> +
> + qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
> + if (!qmp->vregs)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++)
> + qmp->vregs[i].supply = cfg->vreg_list[i];
> +
> + return devm_regulator_bulk_get(dev, num, qmp->vregs);
> +}
> +
> +static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int i;
> +
> + qmp->resets = devm_kcalloc(dev, cfg->num_resets,
> + sizeof(*qmp->resets), GFP_KERNEL);
> + if (!qmp->resets)
> + return -ENOMEM;
> +
> + for (i = 0; i < cfg->num_resets; i++) {
> + struct reset_control *rst;
> + const char *name = cfg->reset_list[i];
> +
> + rst = devm_reset_control_get_exclusive(dev, name);
> + if (IS_ERR(rst)) {
> + dev_err(dev, "failed to get %s reset\n", name);
> + return PTR_ERR(rst);
> + }
> + qmp->resets[i] = rst;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int num = cfg->num_clks;
> + int i;
> +
> + qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
> + if (!qmp->clks)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++)
> + qmp->clks[i].id = cfg->clk_list[i];
> +
> + return devm_clk_bulk_get(dev, num, qmp->clks);
> +}
> +
> +static void phy_clk_release_provider(void *res)
> +{
> + of_clk_del_provider(res);
> +}
> +
> +/*
> + * Register a fixed rate pipe clock.
> + *
> + * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
> + * controls it. The <s>_pipe_clk coming out of the GCC is requested
> + * by the PHY driver for its operations.
> + * We register the <s>_pipe_clksrc here. The gcc driver takes care
> + * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
> + * Below picture shows this relationship.
> + *
> + * +---------------+
> + * | PHY block |<<---------------------------------------+
> + * | | |
> + * | +-------+ | +-----+ |
> + * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
> + * clk | +-------+ | +-----+
> + * +---------------+
> + */
> +static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
> +{
> + struct clk_fixed_rate *fixed;
> + struct clk_init_data init = { };
> + int ret;
> +
> + ret = of_property_read_string(np, "clock-output-names", &init.name);
> + if (ret) {
> + dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
> + return ret;
> + }
> +
> + fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
> + if (!fixed)
> + return -ENOMEM;
> +
> + init.ops = &clk_fixed_rate_ops;
> +
> + /* controllers using QMP phys use 125MHz pipe clock interface */
> + fixed->fixed_rate = 125000000;
> + fixed->hw.init = &init;
> +
> + ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
> + if (ret)
> + return ret;
> +
> + ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
> + if (ret)
> + return ret;
> +
> + /*
> + * Roll a devm action because the clock provider is the child node, but
> + * the child node is not actually a device.
> + */
> + return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
> +}
> +
> +/*
> + * Display Port PLL driver block diagram for branch clocks
> + *
> + * +------------------------------+
> + * | DP_VCO_CLK |
> + * | |
> + * | +-------------------+ |
> + * | | (DP PLL/VCO) | |
> + * | +---------+---------+ |
> + * | v |
> + * | +----------+-----------+ |
> + * | | hsclk_divsel_clk_src | |
> + * | +----------+-----------+ |
> + * +------------------------------+
> + * |
> + * +---------<---------v------------>----------+
> + * | |
> + * +--------v----------------+ |
> + * | dp_phy_pll_link_clk | |
> + * | link_clk | |
> + * +--------+----------------+ |
> + * | |
> + * | |
> + * v v
> + * Input to DISPCC block |
> + * for link clk, crypto clk |
> + * and interface clock |
> + * |
> + * |
> + * +--------<------------+-----------------+---<---+
> + * | | |
> + * +----v---------+ +--------v-----+ +--------v------+
> + * | vco_divided | | vco_divided | | vco_divided |
> + * | _clk_src | | _clk_src | | _clk_src |
> + * | | | | | |
> + * |divsel_six | | divsel_two | | divsel_four |
> + * +-------+------+ +-----+--------+ +--------+------+
> + * | | |
> + * v---->----------v-------------<------v
> + * |
> + * +----------+-----------------+
> + * | dp_phy_pll_vco_div_clk |
> + * +---------+------------------+
> + * |
> + * v
> + * Input to DISPCC block
> + * for DP pixel clock
> + *
> + */
> +static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + switch (req->rate) {
> + case 1620000000UL / 2:
> + case 2700000000UL / 2:
> + /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned long
> +qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + const struct qmp_phy_dp_clks *dp_clks;
> + const struct qmp_phy *qphy;
> + const struct phy_configure_opts_dp *dp_opts;
> +
> + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
> + qphy = dp_clks->qphy;
> + dp_opts = &qphy->dp_opts;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + return 1620000000UL / 2;
> + case 2700:
> + return 2700000000UL / 2;
> + case 5400:
> + return 5400000000UL / 4;
> + case 8100:
> + return 8100000000UL / 6;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = {
> + .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate,
> + .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate,
> +};
> +
> +static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + switch (req->rate) {
> + case 162000000:
> + case 270000000:
> + case 540000000:
> + case 810000000:
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned long
> +qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + const struct qmp_phy_dp_clks *dp_clks;
> + const struct qmp_phy *qphy;
> + const struct phy_configure_opts_dp *dp_opts;
> +
> + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
> + qphy = dp_clks->qphy;
> + dp_opts = &qphy->dp_opts;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + case 2700:
> + case 5400:
> + case 8100:
> + return dp_opts->link_rate * 100000;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct clk_ops qcom_qmp_dp_link_clk_ops = {
> + .determine_rate = qcom_qmp_dp_link_clk_determine_rate,
> + .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate,
> +};
> +
> +static struct clk_hw *
> +qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
> +{
> + struct qmp_phy_dp_clks *dp_clks = data;
> + unsigned int idx = clkspec->args[0];
> +
> + if (idx >= 2) {
> + pr_err("%s: invalid index %u\n", __func__, idx);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + if (idx == 0)
> + return &dp_clks->dp_link_hw;
> +
> + return &dp_clks->dp_pixel_hw;
> +}
> +
> +static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
> + struct device_node *np)
> +{
> + struct clk_init_data init = { };
> + struct qmp_phy_dp_clks *dp_clks;
> + char name[64];
> + int ret;
> +
> + dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
> + if (!dp_clks)
> + return -ENOMEM;
> +
> + dp_clks->qphy = qphy;
> + qphy->dp_clks = dp_clks;
> +
> + snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
> + init.ops = &qcom_qmp_dp_link_clk_ops;
> + init.name = name;
> + dp_clks->dp_link_hw.init = &init;
> + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
> + if (ret)
> + return ret;
> +
> + snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev));
> + init.ops = &qcom_qmp_dp_pixel_clk_ops;
> + init.name = name;
> + dp_clks->dp_pixel_hw.init = &init;
> + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
> + if (ret)
> + return ret;
> +
> + ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks);
> + if (ret)
> + return ret;
> +
> + /*
> + * Roll a devm action because the clock provider is the child node, but
> + * the child node is not actually a device.
> + */
> + return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
> +}
> +
> +static const struct phy_ops qcom_qmp_phy_gen_ops = {
> + .init = qcom_qmp_phy_enable,
> + .exit = qcom_qmp_phy_disable,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct phy_ops qcom_qmp_phy_dp_ops = {
> + .init = qcom_qmp_phy_init,
> + .configure = qcom_qmp_dp_phy_configure,
> + .power_on = qcom_qmp_phy_power_on,
> + .calibrate = qcom_qmp_dp_phy_calibrate,
> + .power_off = qcom_qmp_phy_power_off,
> + .exit = qcom_qmp_phy_exit,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
> + .power_on = qcom_qmp_phy_enable,
> + .power_off = qcom_qmp_phy_disable,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static void qcom_qmp_reset_control_put(void *data)
> +{
> + reset_control_put(data);
> +}
> +
> +static
> +int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
> + void __iomem *serdes, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct phy *generic_phy;
> + struct qmp_phy *qphy;
> + const struct phy_ops *ops;
> + char prop_name[MAX_PROP_NAME];
> + int ret;
> +
> + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
> + if (!qphy)
> + return -ENOMEM;
> +
> + qphy->cfg = cfg;
> + qphy->serdes = serdes;
> + /*
> + * Get memory resources for each phy lane:
> + * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
> + * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
> + * For single lane PHYs: pcs_misc (optional) -> 3.
> + */
> + qphy->tx = of_iomap(np, 0);
> + if (!qphy->tx)
> + return -ENOMEM;
> +
> + qphy->rx = of_iomap(np, 1);
> + if (!qphy->rx)
> + return -ENOMEM;
> +
> + qphy->pcs = of_iomap(np, 2);
> + if (!qphy->pcs)
> + return -ENOMEM;
> +
> + /*
> + * If this is a dual-lane PHY, then there should be registers for the
> + * second lane. Some old device trees did not specify this, so fall
> + * back to old legacy behavior of assuming they can be reached at an
> + * offset from the first lane.
> + */
> + if (cfg->is_dual_lane_phy) {
> + qphy->tx2 = of_iomap(np, 3);
> + qphy->rx2 = of_iomap(np, 4);
> + if (!qphy->tx2 || !qphy->rx2) {
> + dev_warn(dev,
> + "Underspecified device tree, falling back to legacy register regions\n");
> +
> + /* In the old version, pcs_misc is at index 3. */
> + qphy->pcs_misc = qphy->tx2;
> + qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
> + qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
> +
> + } else {
> + qphy->pcs_misc = of_iomap(np, 5);
> + }
> +
> + } else {
> + qphy->pcs_misc = of_iomap(np, 3);
> + }
> +
> + if (!qphy->pcs_misc)
> + dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
> +
> + /*
> + * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
> + * based phys, so they essentially have pipe clock. So,
> + * we return error in case phy is USB3 or PIPE type.
> + * Otherwise, we initialize pipe clock to NULL for
> + * all phys that don't need this.
> + */
> + snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
> + qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
> + if (IS_ERR(qphy->pipe_clk)) {
> + if (cfg->type == PHY_TYPE_PCIE ||
> + cfg->type == PHY_TYPE_USB3) {
> + ret = PTR_ERR(qphy->pipe_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev,
> + "failed to get lane%d pipe_clk, %d\n",
> + id, ret);
> + return ret;
> + }
> + qphy->pipe_clk = NULL;
> + }
> +
> + /* Get lane reset, if any */
> + if (cfg->has_lane_rst) {
> + snprintf(prop_name, sizeof(prop_name), "lane%d", id);
> + qphy->lane_rst = of_reset_control_get_exclusive(np, prop_name);
> + if (IS_ERR(qphy->lane_rst)) {
> + dev_err(dev, "failed to get lane%d reset\n", id);
> + return PTR_ERR(qphy->lane_rst);
> + }
> + ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put,
> + qphy->lane_rst);
> + if (ret)
> + return ret;
> + }
> +
> + if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE)
> + ops = &qcom_qmp_pcie_ufs_ops;
> + else if (cfg->type == PHY_TYPE_DP)
> + ops = &qcom_qmp_phy_dp_ops;
> + else
> + ops = &qcom_qmp_phy_gen_ops;
> +
> + generic_phy = devm_phy_create(dev, np, ops);
> + if (IS_ERR(generic_phy)) {
> + ret = PTR_ERR(generic_phy);
> + dev_err(dev, "failed to create qphy %d\n", ret);
> + return ret;
> + }
> +
> + qphy->phy = generic_phy;
> + qphy->index = id;
> + qphy->qmp = qmp;
> + qmp->phys[id] = qphy;
> + phy_set_drvdata(generic_phy, qphy);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
> + {
> + .compatible = "qcom,ipq8074-qmp-usb3-phy",
> + .data = &ipq8074_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-pcie-phy",
> + .data = &msm8996_pciephy_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-ufs-phy",
> + .data = &msm8996_ufs_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-usb3-phy",
> + .data = &msm8996_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-pcie-phy",
> + .data = &msm8998_pciephy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,ipq8074-qmp-pcie-phy",
> + .data = &ipq8074_pciephy_cfg,
> + }, {
> + .compatible = "qcom,ipq6018-qmp-pcie-phy",
> + .data = &ipq6018_pciephy_cfg,
> + }, {
> + .compatible = "qcom,ipq6018-qmp-usb3-phy",
> + .data = &ipq8074_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc7180-qmp-usb3-phy",
> + .data = &sc7180_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sc8180x-qmp-pcie-phy",
> + .data = &sc8180x_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sc8280xp-qmp-ufs-phy",
> + .data = &sm8350_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-usb3-phy",
> + .data = &sm8150_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sdm845-qhp-pcie-phy",
> + .data = &sdm845_qhp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-pcie-phy",
> + .data = &sdm845_qmp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-usb3-phy",
> + .data = &qmp_v3_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-usb3-uni-phy",
> + .data = &qmp_v3_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-usb3-phy",
> + .data = &msm8998_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm6115-qmp-ufs-phy",
> + .data = &sm6115_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm6350-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-usb3-phy",
> + .data = &sm8150_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-usb3-uni-phy",
> + .data = &sm8150_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-phy",
> + .data = &sm8250_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-uni-phy",
> + .data = &sm8250_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy",
> + .data = &sm8250_qmp_gen3x1_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy",
> + .data = &sm8250_qmp_gen3x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-ufs-phy",
> + .data = &sm8350_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-modem-pcie-phy",
> + .data = &sm8250_qmp_gen3x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdx55-qmp-pcie-phy",
> + .data = &sdx55_qmp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdx55-qmp-usb3-uni-phy",
> + .data = &sdx55_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sdx65-qmp-usb3-uni-phy",
> + .data = &sdx65_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-usb3-phy",
> + .data = &sm8350_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-usb3-uni-phy",
> + .data = &sm8350_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
> + .data = &sm8450_qmp_gen3x1_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
> + .data = &sm8450_qmp_gen4x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-ufs-phy",
> + .data = &sm8450_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-usb3-phy",
> + .data = &sm8350_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,qcm2290-qmp-usb3-phy",
> + .data = &qcm2290_usb3phy_cfg,
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
> +
> +static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
> + {
> + .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
> + .data = &sc7180_usb3dpphy_cfg,
> + },
> + {
> + .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> + .data = &sm8250_usb3dpphy_cfg,
> + },
> + {
> + .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
> + .data = &sc8180x_usb3dpphy_cfg,
> + },
> + { }
> +};
> +
> +static const struct dev_pm_ops qcom_qmp_phy_pm_ops = {
> + SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend,
> + qcom_qmp_phy_runtime_resume, NULL)
> +};
> +
> +static int qcom_qmp_phy_probe(struct platform_device *pdev)
> +{
> + struct qcom_qmp *qmp;
> + struct device *dev = &pdev->dev;
> + struct device_node *child;
> + struct phy_provider *phy_provider;
> + void __iomem *serdes;
> + void __iomem *usb_serdes;
> + void __iomem *dp_serdes = NULL;
> + const struct qmp_phy_combo_cfg *combo_cfg = NULL;
> + const struct qmp_phy_cfg *cfg = NULL;
> + const struct qmp_phy_cfg *usb_cfg = NULL;
> + const struct qmp_phy_cfg *dp_cfg = NULL;
> + int num, id, expected_phys;
> + int ret;
> +
> + qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
> + if (!qmp)
> + return -ENOMEM;
> +
> + qmp->dev = dev;
> + dev_set_drvdata(dev, qmp);
> +
> + /* Get the specific init parameters of QMP phy */
> + cfg = of_device_get_match_data(dev);
> + if (!cfg) {
> + const struct of_device_id *match;
> +
> + match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev);
> + if (!match)
> + return -EINVAL;
> +
> + combo_cfg = match->data;
> + if (!combo_cfg)
> + return -EINVAL;
> +
> + usb_cfg = combo_cfg->usb_cfg;
> + cfg = usb_cfg; /* Setup clks and regulators */
> + }
> +
> + /* per PHY serdes; usually located at base address */
> + usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(serdes))
> + return PTR_ERR(serdes);
> +
> + /* per PHY dp_com; if PHY has dp_com control block */
> + if (combo_cfg || cfg->has_phy_dp_com_ctrl) {
> + qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
> + if (IS_ERR(qmp->dp_com))
> + return PTR_ERR(qmp->dp_com);
> + }
> +
> + if (combo_cfg) {
> + /* Only two serdes for combo PHY */
> + dp_serdes = devm_platform_ioremap_resource(pdev, 2);
> + if (IS_ERR(dp_serdes))
> + return PTR_ERR(dp_serdes);
> +
> + dp_cfg = combo_cfg->dp_cfg;
> + expected_phys = 2;
> + } else {
> + expected_phys = cfg->nlanes;
> + }
> +
> + mutex_init(&qmp->phy_mutex);
> +
> + ret = qcom_qmp_phy_clk_init(dev, cfg);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_reset_init(dev, cfg);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_vreg_init(dev, cfg);
> + if (ret) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "failed to get regulator supplies: %d\n",
> + ret);
> + return ret;
> + }
> +
> + num = of_get_available_child_count(dev->of_node);
> + /* do we have a rogue child node ? */
> + if (num > expected_phys)
> + return -EINVAL;
> +
> + qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
> + if (!qmp->phys)
> + return -ENOMEM;
> +
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> + /*
> + * Prevent runtime pm from being ON by default. Users can enable
> + * it using power/control in sysfs.
> + */
> + pm_runtime_forbid(dev);
> +
> + id = 0;
> + for_each_available_child_of_node(dev->of_node, child) {
> + if (of_node_name_eq(child, "dp-phy")) {
> + cfg = dp_cfg;
> + serdes = dp_serdes;
> + } else if (of_node_name_eq(child, "usb3-phy")) {
> + cfg = usb_cfg;
> + serdes = usb_serdes;
> + }
> +
> + /* Create per-lane phy */
> + ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg);
> + if (ret) {
> + dev_err(dev, "failed to create lane%d phy, %d\n",
> + id, ret);
> + goto err_node_put;
> + }
> +
> + /*
> + * Register the pipe clock provided by phy.
> + * See function description to see details of this pipe clock.
> + */
> + if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) {
> + ret = phy_pipe_clk_register(qmp, child);
> + if (ret) {
> + dev_err(qmp->dev,
> + "failed to register pipe clock source\n");
> + goto err_node_put;
> + }
> + } else if (cfg->type == PHY_TYPE_DP) {
> + ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
> + if (ret) {
> + dev_err(qmp->dev,
> + "failed to register DP clock source\n");
> + goto err_node_put;
> + }
> + }
> + id++;
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (!IS_ERR(phy_provider))
> + dev_info(dev, "Registered Qcom-QMP phy\n");
> + else
> + pm_runtime_disable(dev);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +
> +err_node_put:
> + pm_runtime_disable(dev);
> + of_node_put(child);
> + return ret;
> +}
> +
> +static struct platform_driver qcom_qmp_phy_driver = {
> + .probe = qcom_qmp_phy_probe,
> + .driver = {
> + .name = "qcom-qmp-phy",
> + .pm = &qcom_qmp_phy_pm_ops,
> + .of_match_table = qcom_qmp_phy_of_match_table,
> + },
> +};
> +
> +module_platform_driver(qcom_qmp_phy_driver);
> +
> +MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
> +MODULE_DESCRIPTION("Qualcomm QMP PHY driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
> new file mode 100644
> index 000000000000..c7309e981bfb
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
> @@ -0,0 +1,6350 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +
> +#include <dt-bindings/phy/phy.h>
> +
> +#include "phy-qcom-qmp.h"
> +
> +/* QPHY_SW_RESET bit */
> +#define SW_RESET BIT(0)
> +/* QPHY_POWER_DOWN_CONTROL */
> +#define SW_PWRDN BIT(0)
> +#define REFCLK_DRV_DSBL BIT(1)
> +/* QPHY_START_CONTROL bits */
> +#define SERDES_START BIT(0)
> +#define PCS_START BIT(1)
> +#define PLL_READY_GATE_EN BIT(3)
> +/* QPHY_PCS_STATUS bit */
> +#define PHYSTATUS BIT(6)
> +#define PHYSTATUS_4_20 BIT(7)
> +/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
> +#define PCS_READY BIT(0)
> +
> +/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
> +/* DP PHY soft reset */
> +#define SW_DPPHY_RESET BIT(0)
> +/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
> +#define SW_DPPHY_RESET_MUX BIT(1)
> +/* USB3 PHY soft reset */
> +#define SW_USB3PHY_RESET BIT(2)
> +/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
> +#define SW_USB3PHY_RESET_MUX BIT(3)
> +
> +/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
> +#define USB3_MODE BIT(0) /* enables USB3 mode */
> +#define DP_MODE BIT(1) /* enables DP mode */
> +
> +/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
> +#define ARCVR_DTCT_EN BIT(0)
> +#define ALFPS_DTCT_EN BIT(1)
> +#define ARCVR_DTCT_EVENT_SEL BIT(4)
> +
> +/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
> +#define IRQ_CLEAR BIT(0)
> +
> +/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
> +#define RCVR_DETECT BIT(0)
> +
> +/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
> +#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
> +
> +#define PHY_INIT_COMPLETE_TIMEOUT 10000
> +#define POWER_DOWN_DELAY_US_MIN 10
> +#define POWER_DOWN_DELAY_US_MAX 11
> +
> +#define MAX_PROP_NAME 32
> +
> +/* Define the assumed distance between lanes for underspecified device trees. */
> +#define QMP_PHY_LEGACY_LANE_STRIDE 0x400
> +
> +struct qmp_phy_init_tbl {
> + unsigned int offset;
> + unsigned int val;
> + /*
> + * register part of layout ?
> + * if yes, then offset gives index in the reg-layout
> + */
> + bool in_layout;
> + /*
> + * mask of lanes for which this register is written
> + * for cases when second lane needs different values
> + */
> + u8 lane_mask;
> +};
> +
> +#define QMP_PHY_INIT_CFG(o, v) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .lane_mask = 0xff, \
> + }
> +
> +#define QMP_PHY_INIT_CFG_L(o, v) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .in_layout = true, \
> + .lane_mask = 0xff, \
> + }
> +
> +#define QMP_PHY_INIT_CFG_LANE(o, v, l) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .lane_mask = l, \
> + }
> +
> +/* set of registers with offsets different per-PHY */
> +enum qphy_reg_layout {
> + /* Common block control registers */
> + QPHY_COM_SW_RESET,
> + QPHY_COM_POWER_DOWN_CONTROL,
> + QPHY_COM_START_CONTROL,
> + QPHY_COM_PCS_READY_STATUS,
> + /* PCS registers */
> + QPHY_PLL_LOCK_CHK_DLY_TIME,
> + QPHY_FLL_CNTRL1,
> + QPHY_FLL_CNTRL2,
> + QPHY_FLL_CNT_VAL_L,
> + QPHY_FLL_CNT_VAL_H_TOL,
> + QPHY_FLL_MAN_CODE,
> + QPHY_SW_RESET,
> + QPHY_START_CTRL,
> + QPHY_PCS_READY_STATUS,
> + QPHY_PCS_STATUS,
> + QPHY_PCS_AUTONOMOUS_MODE_CTRL,
> + QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
> + QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
> + QPHY_PCS_POWER_DOWN_CONTROL,
> + /* PCS_MISC registers */
> + QPHY_PCS_MISC_TYPEC_CTRL,
> + /* Keep last to ensure regs_layout arrays are properly initialized */
> + QPHY_LAYOUT_SIZE
> +};
> +
> +static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x168,
> +};
> +
> +static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> +};
> +
> +static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_COM_SW_RESET] = 0x400,
> + [QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
> + [QPHY_COM_START_CONTROL] = 0x408,
> + [QPHY_COM_PCS_READY_STATUS] = 0x448,
> + [QPHY_PLL_LOCK_CHK_DLY_TIME] = 0xa8,
> + [QPHY_FLL_CNTRL1] = 0xc4,
> + [QPHY_FLL_CNTRL2] = 0xc8,
> + [QPHY_FLL_CNT_VAL_L] = 0xcc,
> + [QPHY_FLL_CNT_VAL_H_TOL] = 0xd0,
> + [QPHY_FLL_MAN_CODE] = 0xd4,
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> +};
> +
> +static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_FLL_CNTRL1] = 0xc0,
> + [QPHY_FLL_CNTRL2] = 0xc4,
> + [QPHY_FLL_CNT_VAL_L] = 0xc8,
> + [QPHY_FLL_CNT_VAL_H_TOL] = 0xcc,
> + [QPHY_FLL_MAN_CODE] = 0xd0,
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x17c,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
> +};
> +
> +static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
> +};
> +
> +static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> +};
> +
> +static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x2ac,
> +};
> +
> +static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
> +};
> +
> +static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
> +};
> +
> +static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x1008,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
> +};
> +
> +static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
> + [QPHY_PCS_STATUS] = 0x174,
> + [QPHY_PCS_MISC_TYPEC_CTRL] = 0x00,
> +};
> +
> +static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x160,
> +};
> +
> +static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x168,
> +};
> +
> +static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> +};
> +
> +static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = QPHY_V4_PCS_UFS_PHY_START,
> + [QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_UFS_READY_STATUS,
> + [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET,
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + /* PLL and Loop filter settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + /* SSC settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c),
> + QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> +
> + QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05),
> +
> + QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05),
> + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04),
> + /* PLL and Loop filter settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + /* SSC settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER1, 0x7d),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE0, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x29),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x53),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x61),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
> + QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_EQ_CONFIG5, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
> + QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
> + QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> + QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
> + QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_POST, 0x58),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
> + QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
> + QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
> + QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
> + QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
> + QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x007),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_01, 0x59),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xbb),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG4, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2, 0x52),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4, 0x1a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5, 0x06),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SYSCLK_EN_SEL, 0x27),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BIAS_EN_CKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_ENABLE1, 0xb0),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE0, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_RESTRIM_CTRL2, 0x05),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VCO_TUNE_MAP, 0x10),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_SELECT, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_HSCLK_SEL1, 0x30),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORE_CLK_EN, 0x73),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SVS_MODE_CLK_SEL, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV1, 0x22),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV2, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BGV_TRIM, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BG_CTRL, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL0, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_TAP_EN, 0x0d),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TX_BAND_MODE, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_LANE_MODE, 0x1a),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PARALLEL_RATE, 0x2f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE0, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE1, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE2, 0x1b),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE2, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE0, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE1, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE2, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_THRESH_DFE, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CGA_THRESH_DFE, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXENGINE_EN0, 0x12),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_TRAIN_TIME, 0x25),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_DFE_OVRLP_TIME, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_REFRESH_TIME, 0x05),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_ENABLE_TIME, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_GAIN, 0x26),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_GAIN, 0x12),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_OFFSET_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PRE_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_INTVAL, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EDAC_INITVAL, 0x28),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB0, 0x7f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB1, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RCVRDONE_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_CTRL, 0x70),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE0, 0x8b),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE2, 0x0a),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE2, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_BAND, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE0, 0x5c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE1, 0x3e),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE2, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_ENABLES, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_CNTRL, 0xa0),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_DEGLITCH_CNTRL, 0x08),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DCC_GAIN, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_EN_SIGNAL, 0xc3),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PSM_RX_EN_CAL, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_MISC_CNTRL0, 0xbc),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TS0_TIMER, 0x7f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DLL_HIGHDATARATE, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RESETCODE_OFFSET, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_INITVAL, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RSM_START, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_rx_tbl[] = {
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_PCS_TX_RX_CONFIG, 0x50),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M3P5DB, 0x19),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M3P5DB, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M6DB, 0x17),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M6DB, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG5, 0x9f),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x50),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb5),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4c),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x64),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x1E),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0D),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5B),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_RX_PWM_GEAR_BAND, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_DRV_LVL, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),
> + QMP_PHY_INIT_CFG(QPHY_RX_SYM_RESYNC_CTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_POST_EMP_LVL, 0x12),
> + QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_POST_EMP_LVL, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL2, 0x6e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SYM_RESYNC_CTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL1, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_MIN_HIBERN8_TIME, 0x9a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
> +
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x94),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> +
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x5),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x6e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x39),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x39),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x35),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P6_P7_PRE, 0x33),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_EQ_CONFIG2, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x05),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG2, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x26),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x048),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x46),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_CFG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x50),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MISC1, 0x88),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTERNAL_DIG_CORECLK_DIV, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MODE, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_DC_LEVEL_CTRL, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x56),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x22),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_3, 0x13),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_VMODE_CTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_PI_QEC_CTRL, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_FO_GAIN_RATE2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_UCDR_PI_CONTROLS, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_3, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_VGA_CAL_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x27),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2, 0x5a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B0, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B1, 0xf9),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B3, 0xce),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B4, 0x62),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B0, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B1, 0x7d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B3, 0xcf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B4, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_PHPRE_CTRL, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_MARG_COARSE_CTRL2, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG2, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG4, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG5, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_EQ_CONFIG1, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G3_RXEQEVAL_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_RXEQEVAL_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG2, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0b),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x65),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xf5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf1),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x6d),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x6d),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xed),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x3c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xb7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0xb7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_INITVAL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_EQ_CONFIG2, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x46),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_CFG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0xd0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MISC1, 0x88),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_DC_LEVEL_CTRL, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xcc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xcc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x29),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0xc5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xad),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xb6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xc7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xef),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x81),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x05),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
> +};
> +
> +/* Register names should be validated, they might be different for this PHY */
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_EQ_CONFIG1, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3, 0x28),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
> +};
> +
> +struct qmp_phy;
> +
> +/* struct qmp_phy_cfg - per-PHY initialization config */
> +struct qmp_phy_cfg {
> + /* phy-type - PCIE/UFS/USB */
> + unsigned int type;
> + /* number of lanes provided by phy */
> + int nlanes;
> +
> + /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
> + const struct qmp_phy_init_tbl *serdes_tbl;
> + int serdes_tbl_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_sec;
> + int serdes_tbl_num_sec;
> + const struct qmp_phy_init_tbl *tx_tbl;
> + int tx_tbl_num;
> + const struct qmp_phy_init_tbl *tx_tbl_sec;
> + int tx_tbl_num_sec;
> + const struct qmp_phy_init_tbl *rx_tbl;
> + int rx_tbl_num;
> + const struct qmp_phy_init_tbl *rx_tbl_sec;
> + int rx_tbl_num_sec;
> + const struct qmp_phy_init_tbl *pcs_tbl;
> + int pcs_tbl_num;
> + const struct qmp_phy_init_tbl *pcs_tbl_sec;
> + int pcs_tbl_num_sec;
> + const struct qmp_phy_init_tbl *pcs_misc_tbl;
> + int pcs_misc_tbl_num;
> + const struct qmp_phy_init_tbl *pcs_misc_tbl_sec;
> + int pcs_misc_tbl_num_sec;
> +
> + /* Init sequence for DP PHY block link rates */
> + const struct qmp_phy_init_tbl *serdes_tbl_rbr;
> + int serdes_tbl_rbr_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr;
> + int serdes_tbl_hbr_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr2;
> + int serdes_tbl_hbr2_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
> + int serdes_tbl_hbr3_num;
> +
> + /* DP PHY callbacks */
> + int (*configure_dp_phy)(struct qmp_phy *qphy);
> + void (*configure_dp_tx)(struct qmp_phy *qphy);
> + int (*calibrate_dp_phy)(struct qmp_phy *qphy);
> + void (*dp_aux_init)(struct qmp_phy *qphy);
> +
> + /* clock ids to be requested */
> + const char * const *clk_list;
> + int num_clks;
> + /* resets to be requested */
> + const char * const *reset_list;
> + int num_resets;
> + /* regulators to be requested */
> + const char * const *vreg_list;
> + int num_vregs;
> +
> + /* array of registers with different offsets */
> + const unsigned int *regs;
> +
> + unsigned int start_ctrl;
> + unsigned int pwrdn_ctrl;
> + unsigned int mask_com_pcs_ready;
> + /* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
> + unsigned int phy_status;
> +
> + /* true, if PHY has a separate PHY_COM control block */
> + bool has_phy_com_ctrl;
> + /* true, if PHY has a reset for individual lanes */
> + bool has_lane_rst;
> + /* true, if PHY needs delay after POWER_DOWN */
> + bool has_pwrdn_delay;
> + /* power_down delay in usec */
> + int pwrdn_delay_min;
> + int pwrdn_delay_max;
> +
> + /* true, if PHY has a separate DP_COM control block */
> + bool has_phy_dp_com_ctrl;
> + /* true, if PHY has secondary tx/rx lanes to be configured */
> + bool is_dual_lane_phy;
> +
> + /* true, if PCS block has no separate SW_RESET register */
> + bool no_pcs_sw_reset;
> +};
> +
> +struct qmp_phy_combo_cfg {
> + const struct qmp_phy_cfg *usb_cfg;
> + const struct qmp_phy_cfg *dp_cfg;
> +};
> +
> +/**
> + * struct qmp_phy - per-lane phy descriptor
> + *
> + * @phy: generic phy
> + * @cfg: phy specific configuration
> + * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
> + * @tx: iomapped memory space for lane's tx
> + * @rx: iomapped memory space for lane's rx
> + * @pcs: iomapped memory space for lane's pcs
> + * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
> + * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> + * @pcs_misc: iomapped memory space for lane's pcs_misc
> + * @pipe_clk: pipe clock
> + * @index: lane index
> + * @qmp: QMP phy to which this lane belongs
> + * @lane_rst: lane's reset controller
> + * @mode: current PHY mode
> + * @dp_aux_cfg: Display port aux config
> + * @dp_opts: Display port optional config
> + * @dp_clks: Display port clocks
> + */
> +struct qmp_phy {
> + struct phy *phy;
> + const struct qmp_phy_cfg *cfg;
> + void __iomem *serdes;
> + void __iomem *tx;
> + void __iomem *rx;
> + void __iomem *pcs;
> + void __iomem *tx2;
> + void __iomem *rx2;
> + void __iomem *pcs_misc;
> + struct clk *pipe_clk;
> + unsigned int index;
> + struct qcom_qmp *qmp;
> + struct reset_control *lane_rst;
> + enum phy_mode mode;
> + unsigned int dp_aux_cfg;
> + struct phy_configure_opts_dp dp_opts;
> + struct qmp_phy_dp_clks *dp_clks;
> +};
> +
> +struct qmp_phy_dp_clks {
> + struct qmp_phy *qphy;
> + struct clk_hw dp_link_hw;
> + struct clk_hw dp_pixel_hw;
> +};
> +
> +/**
> + * struct qcom_qmp - structure holding QMP phy block attributes
> + *
> + * @dev: device
> + * @dp_com: iomapped memory space for phy's dp_com control block
> + *
> + * @clks: array of clocks required by phy
> + * @resets: array of resets required by phy
> + * @vregs: regulator supplies bulk data
> + *
> + * @phys: array of per-lane phy descriptors
> + * @phy_mutex: mutex lock for PHY common block initialization
> + * @init_count: phy common block initialization count
> + * @ufs_reset: optional UFS PHY reset handle
> + */
> +struct qcom_qmp {
> + struct device *dev;
> + void __iomem *dp_com;
> +
> + struct clk_bulk_data *clks;
> + struct reset_control **resets;
> + struct regulator_bulk_data *vregs;
> +
> + struct qmp_phy **phys;
> +
> + struct mutex phy_mutex;
> + int init_count;
> +
> + struct reset_control *ufs_reset;
> +};
> +
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
> +
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
> +
> +static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> +{
> + u32 reg;
> +
> + reg = readl(base + offset);
> + reg |= val;
> + writel(reg, base + offset);
> +
> + /* ensure that above write is through */
> + readl(base + offset);
> +}
> +
> +static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
> +{
> + u32 reg;
> +
> + reg = readl(base + offset);
> + reg &= ~val;
> + writel(reg, base + offset);
> +
> + /* ensure that above write is through */
> + readl(base + offset);
> +}
> +
> +/* list of clocks required by phy */
> +static const char * const msm8996_phy_clk_l[] = {
> + "aux", "cfg_ahb", "ref",
> +};
> +
> +static const char * const msm8996_ufs_phy_clk_l[] = {
> + "ref",
> +};
> +
> +static const char * const qmp_v3_phy_clk_l[] = {
> + "aux", "cfg_ahb", "ref", "com_aux",
> +};
> +
> +static const char * const sdm845_pciephy_clk_l[] = {
> + "aux", "cfg_ahb", "ref", "refgen",
> +};
> +
> +static const char * const qmp_v4_phy_clk_l[] = {
> + "aux", "ref_clk_src", "ref", "com_aux",
> +};
> +
> +/* the primary usb3 phy on sm8250 doesn't have a ref clock */
> +static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
> + "aux", "ref_clk_src", "com_aux"
> +};
> +
> +static const char * const sm8450_ufs_phy_clk_l[] = {
> + "qref", "ref", "ref_aux",
> +};
> +
> +static const char * const sdm845_ufs_phy_clk_l[] = {
> + "ref", "ref_aux",
> +};
> +
> +/* usb3 phy on sdx55 doesn't have com_aux clock */
> +static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
> + "aux", "cfg_ahb", "ref"
> +};
> +
> +static const char * const qcm2290_usb3phy_clk_l[] = {
> + "cfg_ahb", "ref", "com_aux",
> +};
> +
> +/* list of resets */
> +static const char * const msm8996_pciephy_reset_l[] = {
> + "phy", "common", "cfg",
> +};
> +
> +static const char * const msm8996_usb3phy_reset_l[] = {
> + "phy", "common",
> +};
> +
> +static const char * const sc7180_usb3phy_reset_l[] = {
> + "phy",
> +};
> +
> +static const char * const qcm2290_usb3phy_reset_l[] = {
> + "phy_phy", "phy",
> +};
> +
> +static const char * const sdm845_pciephy_reset_l[] = {
> + "phy",
> +};
> +
> +/* list of regulators */
> +static const char * const qmp_phy_vreg_l[] = {
> + "vdda-phy", "vdda-pll",
> +};
> +
> +static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq8074_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
> + .tx_tbl = msm8996_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
> + .rx_tbl = ipq8074_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq8074_usb3_rx_tbl),
> + .pcs_tbl = ipq8074_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq8074_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 3,
> +
> + .serdes_tbl = msm8996_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl),
> + .tx_tbl = msm8996_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl),
> + .rx_tbl = msm8996_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl),
> + .pcs_tbl = msm8996_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | PLL_READY_GATE_EN,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .mask_com_pcs_ready = PCS_READY,
> + .phy_status = PHYSTATUS,
> +
> + .has_phy_com_ctrl = true,
> + .has_lane_rst = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_ufs_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8996_ufs_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes_tbl),
> + .tx_tbl = msm8996_ufs_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx_tbl),
> + .rx_tbl = msm8996_ufs_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx_tbl),
> +
> + .clk_list = msm8996_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l),
> +
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> +
> + .regs = msm8996_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8996_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl),
> + .tx_tbl = msm8996_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
> + .rx_tbl = msm8996_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_usb3_rx_tbl),
> + .pcs_tbl = msm8996_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8996_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const char * const ipq8074_pciephy_clk_l[] = {
> + "aux", "cfg_ahb",
> +};
> +/* list of resets */
> +static const char * const ipq8074_pciephy_reset_l[] = {
> + "phy", "common",
> +};
> +
> +static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq8074_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
> + .tx_tbl = ipq8074_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_tx_tbl),
> + .rx_tbl = ipq8074_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
> + .pcs_tbl = ipq8074_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
> + .clk_list = ipq8074_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = NULL,
> + .num_vregs = 0,
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_phy_com_ctrl = false,
> + .has_lane_rst = false,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq6018_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
> + .tx_tbl = ipq6018_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(ipq6018_pcie_tx_tbl),
> + .rx_tbl = ipq6018_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
> + .pcs_tbl = ipq6018_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
> + .clk_list = ipq8074_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = NULL,
> + .num_vregs = 0,
> + .regs = ipq_pciephy_gen3_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> +
> + .has_phy_com_ctrl = false,
> + .has_lane_rst = false,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sdm845_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_serdes_tbl),
> + .tx_tbl = sdm845_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_tx_tbl),
> + .rx_tbl = sdm845_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_rx_tbl),
> + .pcs_tbl = sdm845_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sdm845_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_qmp_pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sdm845_qhp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_serdes_tbl),
> + .tx_tbl = sdm845_qhp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_tx_tbl),
> + .rx_tbl = sdm845_qhp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_rx_tbl),
> + .pcs_tbl = sdm845_qhp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_pcs_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_qhp_pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
> + .serdes_tbl_sec = sm8250_qmp_gen3x1_pcie_serdes_tbl,
> + .serdes_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_serdes_tbl),
> + .tx_tbl = sm8250_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
> + .rx_tbl = sm8250_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
> + .rx_tbl_sec = sm8250_qmp_gen3x1_pcie_rx_tbl,
> + .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_rx_tbl),
> + .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
> + .pcs_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_tbl,
> + .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
> + .pcs_misc_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
> + .tx_tbl = sm8250_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
> + .tx_tbl_sec = sm8250_qmp_gen3x2_pcie_tx_tbl,
> + .tx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_tx_tbl),
> + .rx_tbl = sm8250_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
> + .rx_tbl_sec = sm8250_qmp_gen3x2_pcie_rx_tbl,
> + .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_rx_tbl),
> + .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
> + .pcs_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_tbl,
> + .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
> + .pcs_misc_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> + .tx_tbl = qmp_v3_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
> + .usb_cfg = &sc7180_usb3phy_cfg,
> + .dp_cfg = &sc7180_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sdm845_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
> + .tx_tbl = sdm845_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
> + .rx_tbl = sdm845_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
> + .pcs_tbl = sdm845_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm6115_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
> + .tx_tbl = sm6115_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
> + .rx_tbl = sm6115_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
> + .pcs_tbl = sm6115_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm6115_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> +
> + .is_dual_lane_phy = false,
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8998_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl),
> + .tx_tbl = msm8998_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8998_pcie_tx_tbl),
> + .rx_tbl = msm8998_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8998_pcie_rx_tbl),
> + .pcs_tbl = msm8998_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8998_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
> + .tx_tbl = msm8998_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8998_usb3_tx_tbl),
> + .rx_tbl = msm8998_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
> + .pcs_tbl = msm8998_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8150_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
> + .tx_tbl = sm8150_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
> + .rx_tbl = sm8150_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
> + .pcs_tbl = sm8150_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8150_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_tx_tbl),
> + .rx_tbl = sm8150_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
> + .pcs_tbl = sm8150_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sc8180x_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_serdes_tbl),
> + .tx_tbl = sc8180x_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl),
> + .rx_tbl = sc8180x_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_rx_tbl),
> + .pcs_tbl = sc8180x_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sc8180x_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v4_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> + .tx_tbl = qmp_v4_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
> + .usb_cfg = &sm8150_usb3phy_cfg,
> + .dp_cfg = &sc8180x_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8150_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8150_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8250_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_tx_tbl),
> + .rx_tbl = sm8250_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
> + .pcs_tbl = sm8250_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8250_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8250_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v4_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> + .tx_tbl = qmp_v4_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
> + .usb_cfg = &sm8250_usb3phy_cfg,
> + .dp_cfg = &sm8250_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sdx55_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_tx_tbl),
> + .rx_tbl = sdx55_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_sdx55_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sdx55_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_serdes_tbl),
> + .tx_tbl = sdx55_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_tx_tbl),
> + .rx_tbl = sdx55_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_rx_tbl),
> + .pcs_tbl = sdx55_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sdx55_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS_4_20,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sdx65_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_tx_tbl),
> + .rx_tbl = sdx65_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_sdx55_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8350_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8350_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
> + .tx_tbl = sm8350_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
> + .rx_tbl = sm8350_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
> + .pcs_tbl = sm8350_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8350_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_tx_tbl),
> + .rx_tbl = sm8350_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl),
> + .pcs_tbl = sm8350_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl),
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8350_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8350_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8350_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8350_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
> + .tx_tbl = sm8350_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
> + .rx_tbl = sm8350_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
> + .pcs_tbl = sm8350_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
> + .clk_list = sm8450_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8450_qmp_gen3x1_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl),
> + .tx_tbl = sm8450_qmp_gen3x1_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl),
> + .rx_tbl = sm8450_qmp_gen3x1_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl),
> + .pcs_tbl = sm8450_qmp_gen3x1_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8450_qmp_gen4x2_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_serdes_tbl),
> + .tx_tbl = sm8450_qmp_gen4x2_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_tx_tbl),
> + .rx_tbl = sm8450_qmp_gen4x2_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_rx_tbl),
> + .pcs_tbl = sm8450_qmp_gen4x2_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8450_qmp_gen4x2_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS_4_20,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qcm2290_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
> + .tx_tbl = qcm2290_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qcm2290_usb3_tx_tbl),
> + .rx_tbl = qcm2290_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qcm2290_usb3_rx_tbl),
> + .pcs_tbl = qcm2290_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
> + .clk_list = qcm2290_usb3phy_clk_l,
> + .num_clks = ARRAY_SIZE(qcm2290_usb3phy_clk_l),
> + .reset_list = qcm2290_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qcm2290_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static void qcom_qmp_phy_configure_lane(void __iomem *base,
> + const unsigned int *regs,
> + const struct qmp_phy_init_tbl tbl[],
> + int num,
> + u8 lane_mask)
> +{
> + int i;
> + const struct qmp_phy_init_tbl *t = tbl;
> +
> + if (!t)
> + return;
> +
> + for (i = 0; i < num; i++, t++) {
> + if (!(t->lane_mask & lane_mask))
> + continue;
> +
> + if (t->in_layout)
> + writel(t->val, base + regs[t->offset]);
> + else
> + writel(t->val, base + t->offset);
> + }
> +}
> +
> +static void qcom_qmp_phy_configure(void __iomem *base,
> + const unsigned int *regs,
> + const struct qmp_phy_init_tbl tbl[],
> + int num)
> +{
> + qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff);
> +}
> +
> +static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
> + int serdes_tbl_num = cfg->serdes_tbl_num;
> + int ret;
> +
> + qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
> + if (cfg->serdes_tbl_sec)
> + qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
> + cfg->serdes_tbl_num_sec);
> +
> + if (cfg->type == PHY_TYPE_DP) {
> + switch (dp_opts->link_rate) {
> + case 1620:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_rbr,
> + cfg->serdes_tbl_rbr_num);
> + break;
> + case 2700:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr,
> + cfg->serdes_tbl_hbr_num);
> + break;
> + case 5400:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr2,
> + cfg->serdes_tbl_hbr2_num);
> + break;
> + case 8100:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr3,
> + cfg->serdes_tbl_hbr3_num);
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + }
> +
> +
> + if (cfg->has_phy_com_ctrl) {
> + void __iomem *status;
> + unsigned int mask, val;
> +
> + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
> + SERDES_START | PCS_START);
> +
> + status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
> + mask = cfg->mask_com_pcs_ready;
> +
> + ret = readl_poll_timeout(status, val, (val & mask), 10,
> + PHY_INIT_COMPLETE_TIMEOUT);
> + if (ret) {
> + dev_err(qmp->dev,
> + "phy common block init timed-out\n");
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + /* Turn on BIAS current for PHY/PLL */
> + writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
> + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
> + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_LANE_0_1_PWRDN |
> + DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
> + DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(QSERDES_V3_COM_BIAS_EN |
> + QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
> + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
> + QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
> + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0x24, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
> + writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
> + writel(0xbb, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
> + qphy->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
> + { 0x00, 0x0c, 0x15, 0x1a },
> + { 0x02, 0x0e, 0x16, 0xff },
> + { 0x02, 0x11, 0xff, 0xff },
> + { 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
> + { 0x02, 0x12, 0x16, 0x1a },
> + { 0x09, 0x19, 0x1f, 0xff },
> + { 0x10, 0x1f, 0xff, 0xff },
> + { 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> + { 0x00, 0x0c, 0x14, 0x19 },
> + { 0x00, 0x0b, 0x12, 0xff },
> + { 0x00, 0x0b, 0xff, 0xff },
> + { 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
> + { 0x08, 0x0f, 0x16, 0x1f },
> + { 0x11, 0x1e, 0x1f, 0xff },
> + { 0x19, 0x1f, 0xff, 0xff },
> + { 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
> + unsigned int drv_lvl_reg, unsigned int emp_post_reg)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + unsigned int v_level = 0, p_level = 0;
> + u8 voltage_swing_cfg, pre_emphasis_cfg;
> + int i;
> +
> + for (i = 0; i < dp_opts->lanes; i++) {
> + v_level = max(v_level, dp_opts->voltage[i]);
> + p_level = max(p_level, dp_opts->pre[i]);
> + }
> +
> + if (dp_opts->link_rate <= 2700) {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> + } else {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
> + }
> +
> + /* TODO: Move check to config check */
> + if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> + return -EINVAL;
> +
> + /* Enable MUX to use Cursor values from these registers */
> + voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> + pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> +
> + writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
> + writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
> + writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
> + writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 bias_en, drvr_en;
> +
> + if (qcom_qmp_phy_configure_dp_swing(qphy,
> + QSERDES_V3_TX_TX_DRV_LVL,
> + QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
> + return;
> +
> + if (dp_opts->lanes == 1) {
> + bias_en = 0x3e;
> + drvr_en = 0x13;
> + } else {
> + bias_en = 0x3f;
> + drvr_en = 0x10;
> + }
> +
> + writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> + writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> +}
> +
> +static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy)
> +{
> + u32 val;
> + bool reverse = false;
> +
> + val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
> +
> + /*
> + * TODO: Assume orientation is CC1 for now and two lanes, need to
> + * use type-c connector to understand orientation and lanes.
> + *
> + * Otherwise val changes to be like below if this code understood
> + * the orientation of the type-c cable.
> + *
> + * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
> + * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
> + * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
> + * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> + * if (orientation == ORIENTATION_CC2)
> + * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> + */
> + val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> + writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
> +
> + return reverse;
> +}
> +
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 phy_vco_div, status;
> + unsigned long pixel_freq;
> +
> + qcom_qmp_phy_configure_dp_mode(qphy);
> +
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> + writel(0x04, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
> + udelay(2000);
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000);
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> + static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
> + u8 val;
> +
> + qphy->dp_aux_cfg++;
> + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[qphy->dp_aux_cfg];
> +
> + writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + /* Turn on BIAS current for PHY/PLL */
> + writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
> + writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
> + writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
> + qphy->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + /* Program default values before writing proper values */
> + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +
> + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +
> + qcom_qmp_phy_configure_dp_swing(qphy,
> + QSERDES_V4_TX_TX_DRV_LVL,
> + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +}
> +
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 phy_vco_div, status;
> + unsigned long pixel_freq;
> + u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
> + bool reverse;
> +
> + writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
> +
> + reverse = qcom_qmp_phy_configure_dp_mode(qphy);
> +
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> +
> + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + /*
> + * At least for 7nm DP PHY this has to be done after enabling link
> + * clock.
> + */
> +
> + if (dp_opts->lanes == 1) {
> + bias0_en = reverse ? 0x3e : 0x15;
> + bias1_en = reverse ? 0x15 : 0x3e;
> + drvr0_en = reverse ? 0x13 : 0x10;
> + drvr1_en = reverse ? 0x10 : 0x13;
> + } else if (dp_opts->lanes == 2) {
> + bias0_en = reverse ? 0x3f : 0x15;
> + bias1_en = reverse ? 0x15 : 0x3f;
> + drvr0_en = 0x10;
> + drvr1_en = 0x10;
> + } else {
> + bias0_en = 0x3f;
> + bias1_en = 0x3f;
> + drvr0_en = 0x10;
> + drvr1_en = 0x10;
> + }
> +
> + writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
> + writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
> + writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
> + writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
> +
> + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
> + udelay(2000);
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
> + writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
> +
> + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +
> + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +
> + return 0;
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> + static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
> + u8 val;
> +
> + qphy->dp_aux_cfg++;
> + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[qphy->dp_aux_cfg];
> +
> + writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &opts->dp;
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
> + if (qphy->dp_opts.set_voltages) {
> + cfg->configure_dp_tx(qphy);
> + qphy->dp_opts.set_voltages = 0;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + if (cfg->calibrate_dp_phy)
> + return cfg->calibrate_dp_phy(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *dp_com = qmp->dp_com;
> + int ret, i;
> +
> + mutex_lock(&qmp->phy_mutex);
> + if (qmp->init_count++) {
> + mutex_unlock(&qmp->phy_mutex);
> + return 0;
> + }
> +
> + /* turn on regulator supplies */
> + ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
> + if (ret) {
> + dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
> + goto err_unlock;
> + }
> +
> + for (i = 0; i < cfg->num_resets; i++) {
> + ret = reset_control_assert(qmp->resets[i]);
> + if (ret) {
> + dev_err(qmp->dev, "%s reset assert failed\n",
> + cfg->reset_list[i]);
> + goto err_disable_regulators;
> + }
> + }
> +
> + for (i = cfg->num_resets - 1; i >= 0; i--) {
> + ret = reset_control_deassert(qmp->resets[i]);
> + if (ret) {
> + dev_err(qmp->dev, "%s reset deassert failed\n",
> + qphy->cfg->reset_list[i]);
> + goto err_assert_reset;
> + }
> + }
> +
> + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
> + if (ret)
> + goto err_assert_reset;
> +
> + if (cfg->has_phy_dp_com_ctrl) {
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
> + SW_PWRDN);
> + /* override hardware control for reset of qmp phy */
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +
> + /* Default type-c orientation, i.e CC1 */
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
> +
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
> + USB3_MODE | DP_MODE);
> +
> + /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
> + }
> +
> + if (cfg->has_phy_com_ctrl) {
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
> + SW_PWRDN);
> + } else {
> + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
> + qphy_setbits(pcs,
> + cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> + cfg->pwrdn_ctrl);
> + else
> + qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL,
> + cfg->pwrdn_ctrl);
> + }
> +
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +
> +err_assert_reset:
> + while (++i < cfg->num_resets)
> + reset_control_assert(qmp->resets[i]);
> +err_disable_regulators:
> + regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> +err_unlock:
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + int i = cfg->num_resets;
> +
> + mutex_lock(&qmp->phy_mutex);
> + if (--qmp->init_count) {
> + mutex_unlock(&qmp->phy_mutex);
> + return 0;
> + }
> +
> + reset_control_assert(qmp->ufs_reset);
> + if (cfg->has_phy_com_ctrl) {
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
> + SERDES_START | PCS_START);
> + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET],
> + SW_RESET);
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
> + SW_PWRDN);
> + }
> +
> + while (--i >= 0)
> + reset_control_assert(qmp->resets[i]);
> +
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> +
> + regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> +
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_init(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + int ret;
> + dev_vdbg(qmp->dev, "Initializing QMP phy\n");
> +
> + if (cfg->no_pcs_sw_reset) {
> + /*
> + * Get UFS reset, which is delayed until now to avoid a
> + * circular dependency where UFS needs its PHY, but the PHY
> + * needs this UFS reset.
> + */
> + if (!qmp->ufs_reset) {
> + qmp->ufs_reset =
> + devm_reset_control_get_exclusive(qmp->dev,
> + "ufsphy");
> +
> + if (IS_ERR(qmp->ufs_reset)) {
> + ret = PTR_ERR(qmp->ufs_reset);
> + dev_err(qmp->dev,
> + "failed to get UFS reset: %d\n",
> + ret);
> +
> + qmp->ufs_reset = NULL;
> + return ret;
> + }
> + }
> +
> + ret = reset_control_assert(qmp->ufs_reset);
> + if (ret)
> + return ret;
> + }
> +
> + ret = qcom_qmp_phy_com_init(qphy);
> + if (ret)
> + return ret;
> +
> + if (cfg->type == PHY_TYPE_DP)
> + cfg->dp_aux_init(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_power_on(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *tx = qphy->tx;
> + void __iomem *rx = qphy->rx;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> + void __iomem *status;
> + unsigned int mask, val, ready;
> + int ret;
> +
> + qcom_qmp_phy_serdes_init(qphy);
> +
> + if (cfg->has_lane_rst) {
> + ret = reset_control_deassert(qphy->lane_rst);
> + if (ret) {
> + dev_err(qmp->dev, "lane%d reset deassert failed\n",
> + qphy->index);
> + return ret;
> + }
> + }
> +
> + ret = clk_prepare_enable(qphy->pipe_clk);
> + if (ret) {
> + dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
> + goto err_reset_lane;
> + }
> +
> + /* Tx, Rx, and PCS configurations */
> + qcom_qmp_phy_configure_lane(tx, cfg->regs,
> + cfg->tx_tbl, cfg->tx_tbl_num, 1);
> + if (cfg->tx_tbl_sec)
> + qcom_qmp_phy_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
> + cfg->tx_tbl_num_sec, 1);
> +
> + /* Configuration for other LANE for USB-DP combo PHY */
> + if (cfg->is_dual_lane_phy) {
> + qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
> + cfg->tx_tbl, cfg->tx_tbl_num, 2);
> + if (cfg->tx_tbl_sec)
> + qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
> + cfg->tx_tbl_sec,
> + cfg->tx_tbl_num_sec, 2);
> + }
> +
> + /* Configure special DP tx tunings */
> + if (cfg->type == PHY_TYPE_DP)
> + cfg->configure_dp_tx(qphy);
> +
> + qcom_qmp_phy_configure_lane(rx, cfg->regs,
> + cfg->rx_tbl, cfg->rx_tbl_num, 1);
> + if (cfg->rx_tbl_sec)
> + qcom_qmp_phy_configure_lane(rx, cfg->regs,
> + cfg->rx_tbl_sec, cfg->rx_tbl_num_sec, 1);
> +
> + if (cfg->is_dual_lane_phy) {
> + qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
> + cfg->rx_tbl, cfg->rx_tbl_num, 2);
> + if (cfg->rx_tbl_sec)
> + qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
> + cfg->rx_tbl_sec,
> + cfg->rx_tbl_num_sec, 2);
> + }
> +
> + /* Configure link rate, swing, etc. */
> + if (cfg->type == PHY_TYPE_DP) {
> + cfg->configure_dp_phy(qphy);
> + } else {
> + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
> + if (cfg->pcs_tbl_sec)
> + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
> + cfg->pcs_tbl_num_sec);
> + }
> +
> + ret = reset_control_deassert(qmp->ufs_reset);
> + if (ret)
> + goto err_disable_pipe_clk;
> +
> + qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
> + cfg->pcs_misc_tbl_num);
> + if (cfg->pcs_misc_tbl_sec)
> + qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
> + cfg->pcs_misc_tbl_num_sec);
> +
> + /*
> + * Pull out PHY from POWER DOWN state.
> + * This is active low enable signal to power-down PHY.
> + */
> + if(cfg->type == PHY_TYPE_PCIE)
> + qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
> +
> + if (cfg->has_pwrdn_delay)
> + usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
> +
> + if (cfg->type != PHY_TYPE_DP) {
> + /* Pull PHY out of reset state */
> + if (!cfg->no_pcs_sw_reset)
> + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> + /* start SerDes and Phy-Coding-Sublayer */
> + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> +
> + if (cfg->type == PHY_TYPE_UFS) {
> + status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
> + mask = PCS_READY;
> + ready = PCS_READY;
> + } else {
> + status = pcs + cfg->regs[QPHY_PCS_STATUS];
> + mask = cfg->phy_status;
> + ready = 0;
> + }
> +
> + ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
> + PHY_INIT_COMPLETE_TIMEOUT);
> + if (ret) {
> + dev_err(qmp->dev, "phy initialization timed-out\n");
> + goto err_disable_pipe_clk;
> + }
> + }
> + return 0;
> +
> +err_disable_pipe_clk:
> + clk_disable_unprepare(qphy->pipe_clk);
> +err_reset_lane:
> + if (cfg->has_lane_rst)
> + reset_control_assert(qphy->lane_rst);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_power_off(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + clk_disable_unprepare(qphy->pipe_clk);
> +
> + if (cfg->type == PHY_TYPE_DP) {
> + /* Assert DP PHY power down */
> + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> + } else {
> + /* PHY reset */
> + if (!cfg->no_pcs_sw_reset)
> + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> +
> + /* stop SerDes and Phy-Coding-Sublayer */
> + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> +
> + /* Put PHY into POWER DOWN state: active low */
> + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
> + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> + cfg->pwrdn_ctrl);
> + } else {
> + qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL,
> + cfg->pwrdn_ctrl);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_exit(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + if (cfg->has_lane_rst)
> + reset_control_assert(qphy->lane_rst);
> +
> + qcom_qmp_phy_com_exit(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_enable(struct phy *phy)
> +{
> + int ret;
> +
> + ret = qcom_qmp_phy_init(phy);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_power_on(phy);
> + if (ret)
> + qcom_qmp_phy_exit(phy);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_disable(struct phy *phy)
> +{
> + int ret;
> +
> + ret = qcom_qmp_phy_power_off(phy);
> + if (ret)
> + return ret;
> + return qcom_qmp_phy_exit(phy);
> +}
> +
> +static int qcom_qmp_phy_set_mode(struct phy *phy,
> + enum phy_mode mode, int submode)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> +
> + qphy->mode = mode;
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> + u32 intr_mask;
> +
> + if (qphy->mode == PHY_MODE_USB_HOST_SS ||
> + qphy->mode == PHY_MODE_USB_DEVICE_SS)
> + intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
> + else
> + intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
> +
> + /* Clear any pending interrupts status */
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> + /* Writing 1 followed by 0 clears the interrupt */
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> +
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
> + ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
> +
> + /* Enable required PHY autonomous mode interrupts */
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
> +
> + /* Enable i/o clamp_n for autonomous mode */
> + if (pcs_misc)
> + qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
> +}
> +
> +static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> +
> + /* Disable i/o clamp_n on resume for normal mode */
> + if (pcs_misc)
> + qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
> +
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
> + ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
> +
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> + /* Writing 1 followed by 0 clears the interrupt */
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> +}
> +
> +static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct qmp_phy *qphy = qmp->phys[0];
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
> +
> + /* Supported only for USB3 PHY and luckily USB3 is the first phy */
> + if (cfg->type != PHY_TYPE_USB3)
> + return 0;
> +
> + if (!qmp->init_count) {
> + dev_vdbg(dev, "PHY not initialized, bailing out\n");
> + return 0;
> + }
> +
> + qcom_qmp_phy_enable_autonomous_mode(qphy);
> +
> + clk_disable_unprepare(qphy->pipe_clk);
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct qmp_phy *qphy = qmp->phys[0];
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + int ret = 0;
> +
> + dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
> +
> + /* Supported only for USB3 PHY and luckily USB3 is the first phy */
> + if (cfg->type != PHY_TYPE_USB3)
> + return 0;
> +
> + if (!qmp->init_count) {
> + dev_vdbg(dev, "PHY not initialized, bailing out\n");
> + return 0;
> + }
> +
> + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(qphy->pipe_clk);
> + if (ret) {
> + dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> + return ret;
> + }
> +
> + qcom_qmp_phy_disable_autonomous_mode(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int num = cfg->num_vregs;
> + int i;
> +
> + qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
> + if (!qmp->vregs)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++)
> + qmp->vregs[i].supply = cfg->vreg_list[i];
> +
> + return devm_regulator_bulk_get(dev, num, qmp->vregs);
> +}
> +
> +static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int i;
> +
> + qmp->resets = devm_kcalloc(dev, cfg->num_resets,
> + sizeof(*qmp->resets), GFP_KERNEL);
> + if (!qmp->resets)
> + return -ENOMEM;
> +
> + for (i = 0; i < cfg->num_resets; i++) {
> + struct reset_control *rst;
> + const char *name = cfg->reset_list[i];
> +
> + rst = devm_reset_control_get_exclusive(dev, name);
> + if (IS_ERR(rst)) {
> + dev_err(dev, "failed to get %s reset\n", name);
> + return PTR_ERR(rst);
> + }
> + qmp->resets[i] = rst;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int num = cfg->num_clks;
> + int i;
> +
> + qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
> + if (!qmp->clks)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++)
> + qmp->clks[i].id = cfg->clk_list[i];
> +
> + return devm_clk_bulk_get(dev, num, qmp->clks);
> +}
> +
> +static void phy_clk_release_provider(void *res)
> +{
> + of_clk_del_provider(res);
> +}
> +
> +/*
> + * Register a fixed rate pipe clock.
> + *
> + * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
> + * controls it. The <s>_pipe_clk coming out of the GCC is requested
> + * by the PHY driver for its operations.
> + * We register the <s>_pipe_clksrc here. The gcc driver takes care
> + * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
> + * Below picture shows this relationship.
> + *
> + * +---------------+
> + * | PHY block |<<---------------------------------------+
> + * | | |
> + * | +-------+ | +-----+ |
> + * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
> + * clk | +-------+ | +-----+
> + * +---------------+
> + */
> +static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
> +{
> + struct clk_fixed_rate *fixed;
> + struct clk_init_data init = { };
> + int ret;
> +
> + ret = of_property_read_string(np, "clock-output-names", &init.name);
> + if (ret) {
> + dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
> + return ret;
> + }
> +
> + fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
> + if (!fixed)
> + return -ENOMEM;
> +
> + init.ops = &clk_fixed_rate_ops;
> +
> + /* controllers using QMP phys use 125MHz pipe clock interface */
> + fixed->fixed_rate = 125000000;
> + fixed->hw.init = &init;
> +
> + ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
> + if (ret)
> + return ret;
> +
> + ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
> + if (ret)
> + return ret;
> +
> + /*
> + * Roll a devm action because the clock provider is the child node, but
> + * the child node is not actually a device.
> + */
> + return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
> +}
> +
> +/*
> + * Display Port PLL driver block diagram for branch clocks
> + *
> + * +------------------------------+
> + * | DP_VCO_CLK |
> + * | |
> + * | +-------------------+ |
> + * | | (DP PLL/VCO) | |
> + * | +---------+---------+ |
> + * | v |
> + * | +----------+-----------+ |
> + * | | hsclk_divsel_clk_src | |
> + * | +----------+-----------+ |
> + * +------------------------------+
> + * |
> + * +---------<---------v------------>----------+
> + * | |
> + * +--------v----------------+ |
> + * | dp_phy_pll_link_clk | |
> + * | link_clk | |
> + * +--------+----------------+ |
> + * | |
> + * | |
> + * v v
> + * Input to DISPCC block |
> + * for link clk, crypto clk |
> + * and interface clock |
> + * |
> + * |
> + * +--------<------------+-----------------+---<---+
> + * | | |
> + * +----v---------+ +--------v-----+ +--------v------+
> + * | vco_divided | | vco_divided | | vco_divided |
> + * | _clk_src | | _clk_src | | _clk_src |
> + * | | | | | |
> + * |divsel_six | | divsel_two | | divsel_four |
> + * +-------+------+ +-----+--------+ +--------+------+
> + * | | |
> + * v---->----------v-------------<------v
> + * |
> + * +----------+-----------------+
> + * | dp_phy_pll_vco_div_clk |
> + * +---------+------------------+
> + * |
> + * v
> + * Input to DISPCC block
> + * for DP pixel clock
> + *
> + */
> +static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + switch (req->rate) {
> + case 1620000000UL / 2:
> + case 2700000000UL / 2:
> + /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned long
> +qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + const struct qmp_phy_dp_clks *dp_clks;
> + const struct qmp_phy *qphy;
> + const struct phy_configure_opts_dp *dp_opts;
> +
> + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
> + qphy = dp_clks->qphy;
> + dp_opts = &qphy->dp_opts;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + return 1620000000UL / 2;
> + case 2700:
> + return 2700000000UL / 2;
> + case 5400:
> + return 5400000000UL / 4;
> + case 8100:
> + return 8100000000UL / 6;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = {
> + .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate,
> + .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate,
> +};
> +
> +static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + switch (req->rate) {
> + case 162000000:
> + case 270000000:
> + case 540000000:
> + case 810000000:
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned long
> +qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + const struct qmp_phy_dp_clks *dp_clks;
> + const struct qmp_phy *qphy;
> + const struct phy_configure_opts_dp *dp_opts;
> +
> + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
> + qphy = dp_clks->qphy;
> + dp_opts = &qphy->dp_opts;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + case 2700:
> + case 5400:
> + case 8100:
> + return dp_opts->link_rate * 100000;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct clk_ops qcom_qmp_dp_link_clk_ops = {
> + .determine_rate = qcom_qmp_dp_link_clk_determine_rate,
> + .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate,
> +};
> +
> +static struct clk_hw *
> +qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
> +{
> + struct qmp_phy_dp_clks *dp_clks = data;
> + unsigned int idx = clkspec->args[0];
> +
> + if (idx >= 2) {
> + pr_err("%s: invalid index %u\n", __func__, idx);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + if (idx == 0)
> + return &dp_clks->dp_link_hw;
> +
> + return &dp_clks->dp_pixel_hw;
> +}
> +
> +static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
> + struct device_node *np)
> +{
> + struct clk_init_data init = { };
> + struct qmp_phy_dp_clks *dp_clks;
> + char name[64];
> + int ret;
> +
> + dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
> + if (!dp_clks)
> + return -ENOMEM;
> +
> + dp_clks->qphy = qphy;
> + qphy->dp_clks = dp_clks;
> +
> + snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
> + init.ops = &qcom_qmp_dp_link_clk_ops;
> + init.name = name;
> + dp_clks->dp_link_hw.init = &init;
> + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
> + if (ret)
> + return ret;
> +
> + snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev));
> + init.ops = &qcom_qmp_dp_pixel_clk_ops;
> + init.name = name;
> + dp_clks->dp_pixel_hw.init = &init;
> + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
> + if (ret)
> + return ret;
> +
> + ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks);
> + if (ret)
> + return ret;
> +
> + /*
> + * Roll a devm action because the clock provider is the child node, but
> + * the child node is not actually a device.
> + */
> + return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
> +}
> +
> +static const struct phy_ops qcom_qmp_phy_gen_ops = {
> + .init = qcom_qmp_phy_enable,
> + .exit = qcom_qmp_phy_disable,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct phy_ops qcom_qmp_phy_dp_ops = {
> + .init = qcom_qmp_phy_init,
> + .configure = qcom_qmp_dp_phy_configure,
> + .power_on = qcom_qmp_phy_power_on,
> + .calibrate = qcom_qmp_dp_phy_calibrate,
> + .power_off = qcom_qmp_phy_power_off,
> + .exit = qcom_qmp_phy_exit,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
> + .power_on = qcom_qmp_phy_enable,
> + .power_off = qcom_qmp_phy_disable,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static void qcom_qmp_reset_control_put(void *data)
> +{
> + reset_control_put(data);
> +}
> +
> +static
> +int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
> + void __iomem *serdes, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct phy *generic_phy;
> + struct qmp_phy *qphy;
> + const struct phy_ops *ops;
> + char prop_name[MAX_PROP_NAME];
> + int ret;
> +
> + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
> + if (!qphy)
> + return -ENOMEM;
> +
> + qphy->cfg = cfg;
> + qphy->serdes = serdes;
> + /*
> + * Get memory resources for each phy lane:
> + * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
> + * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
> + * For single lane PHYs: pcs_misc (optional) -> 3.
> + */
> + qphy->tx = of_iomap(np, 0);
> + if (!qphy->tx)
> + return -ENOMEM;
> +
> + qphy->rx = of_iomap(np, 1);
> + if (!qphy->rx)
> + return -ENOMEM;
> +
> + qphy->pcs = of_iomap(np, 2);
> + if (!qphy->pcs)
> + return -ENOMEM;
> +
> + /*
> + * If this is a dual-lane PHY, then there should be registers for the
> + * second lane. Some old device trees did not specify this, so fall
> + * back to old legacy behavior of assuming they can be reached at an
> + * offset from the first lane.
> + */
> + if (cfg->is_dual_lane_phy) {
> + qphy->tx2 = of_iomap(np, 3);
> + qphy->rx2 = of_iomap(np, 4);
> + if (!qphy->tx2 || !qphy->rx2) {
> + dev_warn(dev,
> + "Underspecified device tree, falling back to legacy register regions\n");
> +
> + /* In the old version, pcs_misc is at index 3. */
> + qphy->pcs_misc = qphy->tx2;
> + qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
> + qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
> +
> + } else {
> + qphy->pcs_misc = of_iomap(np, 5);
> + }
> +
> + } else {
> + qphy->pcs_misc = of_iomap(np, 3);
> + }
> +
> + if (!qphy->pcs_misc)
> + dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
> +
> + /*
> + * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
> + * based phys, so they essentially have pipe clock. So,
> + * we return error in case phy is USB3 or PIPE type.
> + * Otherwise, we initialize pipe clock to NULL for
> + * all phys that don't need this.
> + */
> + snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
> + qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
> + if (IS_ERR(qphy->pipe_clk)) {
> + if (cfg->type == PHY_TYPE_PCIE ||
> + cfg->type == PHY_TYPE_USB3) {
> + ret = PTR_ERR(qphy->pipe_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev,
> + "failed to get lane%d pipe_clk, %d\n",
> + id, ret);
> + return ret;
> + }
> + qphy->pipe_clk = NULL;
> + }
> +
> + /* Get lane reset, if any */
> + if (cfg->has_lane_rst) {
> + snprintf(prop_name, sizeof(prop_name), "lane%d", id);
> + qphy->lane_rst = of_reset_control_get_exclusive(np, prop_name);
> + if (IS_ERR(qphy->lane_rst)) {
> + dev_err(dev, "failed to get lane%d reset\n", id);
> + return PTR_ERR(qphy->lane_rst);
> + }
> + ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put,
> + qphy->lane_rst);
> + if (ret)
> + return ret;
> + }
> +
> + if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE)
> + ops = &qcom_qmp_pcie_ufs_ops;
> + else if (cfg->type == PHY_TYPE_DP)
> + ops = &qcom_qmp_phy_dp_ops;
> + else
> + ops = &qcom_qmp_phy_gen_ops;
> +
> + generic_phy = devm_phy_create(dev, np, ops);
> + if (IS_ERR(generic_phy)) {
> + ret = PTR_ERR(generic_phy);
> + dev_err(dev, "failed to create qphy %d\n", ret);
> + return ret;
> + }
> +
> + qphy->phy = generic_phy;
> + qphy->index = id;
> + qphy->qmp = qmp;
> + qmp->phys[id] = qphy;
> + phy_set_drvdata(generic_phy, qphy);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
> + {
> + .compatible = "qcom,ipq8074-qmp-usb3-phy",
> + .data = &ipq8074_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-pcie-phy",
> + .data = &msm8996_pciephy_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-ufs-phy",
> + .data = &msm8996_ufs_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-usb3-phy",
> + .data = &msm8996_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-pcie-phy",
> + .data = &msm8998_pciephy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,ipq8074-qmp-pcie-phy",
> + .data = &ipq8074_pciephy_cfg,
> + }, {
> + .compatible = "qcom,ipq6018-qmp-pcie-phy",
> + .data = &ipq6018_pciephy_cfg,
> + }, {
> + .compatible = "qcom,ipq6018-qmp-usb3-phy",
> + .data = &ipq8074_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc7180-qmp-usb3-phy",
> + .data = &sc7180_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sc8180x-qmp-pcie-phy",
> + .data = &sc8180x_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sc8280xp-qmp-ufs-phy",
> + .data = &sm8350_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-usb3-phy",
> + .data = &sm8150_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sdm845-qhp-pcie-phy",
> + .data = &sdm845_qhp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-pcie-phy",
> + .data = &sdm845_qmp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-usb3-phy",
> + .data = &qmp_v3_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-usb3-uni-phy",
> + .data = &qmp_v3_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-usb3-phy",
> + .data = &msm8998_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm6115-qmp-ufs-phy",
> + .data = &sm6115_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm6350-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-usb3-phy",
> + .data = &sm8150_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-usb3-uni-phy",
> + .data = &sm8150_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-phy",
> + .data = &sm8250_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-uni-phy",
> + .data = &sm8250_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy",
> + .data = &sm8250_qmp_gen3x1_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy",
> + .data = &sm8250_qmp_gen3x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-ufs-phy",
> + .data = &sm8350_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-modem-pcie-phy",
> + .data = &sm8250_qmp_gen3x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdx55-qmp-pcie-phy",
> + .data = &sdx55_qmp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdx55-qmp-usb3-uni-phy",
> + .data = &sdx55_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sdx65-qmp-usb3-uni-phy",
> + .data = &sdx65_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-usb3-phy",
> + .data = &sm8350_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-usb3-uni-phy",
> + .data = &sm8350_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
> + .data = &sm8450_qmp_gen3x1_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
> + .data = &sm8450_qmp_gen4x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-ufs-phy",
> + .data = &sm8450_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-usb3-phy",
> + .data = &sm8350_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,qcm2290-qmp-usb3-phy",
> + .data = &qcm2290_usb3phy_cfg,
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
> +
> +static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
> + {
> + .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
> + .data = &sc7180_usb3dpphy_cfg,
> + },
> + {
> + .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> + .data = &sm8250_usb3dpphy_cfg,
> + },
> + {
> + .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
> + .data = &sc8180x_usb3dpphy_cfg,
> + },
> + { }
> +};
> +
> +static const struct dev_pm_ops qcom_qmp_phy_pm_ops = {
> + SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend,
> + qcom_qmp_phy_runtime_resume, NULL)
> +};
> +
> +static int qcom_qmp_phy_probe(struct platform_device *pdev)
> +{
> + struct qcom_qmp *qmp;
> + struct device *dev = &pdev->dev;
> + struct device_node *child;
> + struct phy_provider *phy_provider;
> + void __iomem *serdes;
> + void __iomem *usb_serdes;
> + void __iomem *dp_serdes = NULL;
> + const struct qmp_phy_combo_cfg *combo_cfg = NULL;
> + const struct qmp_phy_cfg *cfg = NULL;
> + const struct qmp_phy_cfg *usb_cfg = NULL;
> + const struct qmp_phy_cfg *dp_cfg = NULL;
> + int num, id, expected_phys;
> + int ret;
> +
> + qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
> + if (!qmp)
> + return -ENOMEM;
> +
> + qmp->dev = dev;
> + dev_set_drvdata(dev, qmp);
> +
> + /* Get the specific init parameters of QMP phy */
> + cfg = of_device_get_match_data(dev);
> + if (!cfg) {
> + const struct of_device_id *match;
> +
> + match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev);
> + if (!match)
> + return -EINVAL;
> +
> + combo_cfg = match->data;
> + if (!combo_cfg)
> + return -EINVAL;
> +
> + usb_cfg = combo_cfg->usb_cfg;
> + cfg = usb_cfg; /* Setup clks and regulators */
> + }
> +
> + /* per PHY serdes; usually located at base address */
> + usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(serdes))
> + return PTR_ERR(serdes);
> +
> + /* per PHY dp_com; if PHY has dp_com control block */
> + if (combo_cfg || cfg->has_phy_dp_com_ctrl) {
> + qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
> + if (IS_ERR(qmp->dp_com))
> + return PTR_ERR(qmp->dp_com);
> + }
> +
> + if (combo_cfg) {
> + /* Only two serdes for combo PHY */
> + dp_serdes = devm_platform_ioremap_resource(pdev, 2);
> + if (IS_ERR(dp_serdes))
> + return PTR_ERR(dp_serdes);
> +
> + dp_cfg = combo_cfg->dp_cfg;
> + expected_phys = 2;
> + } else {
> + expected_phys = cfg->nlanes;
> + }
> +
> + mutex_init(&qmp->phy_mutex);
> +
> + ret = qcom_qmp_phy_clk_init(dev, cfg);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_reset_init(dev, cfg);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_vreg_init(dev, cfg);
> + if (ret) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "failed to get regulator supplies: %d\n",
> + ret);
> + return ret;
> + }
> +
> + num = of_get_available_child_count(dev->of_node);
> + /* do we have a rogue child node ? */
> + if (num > expected_phys)
> + return -EINVAL;
> +
> + qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
> + if (!qmp->phys)
> + return -ENOMEM;
> +
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> + /*
> + * Prevent runtime pm from being ON by default. Users can enable
> + * it using power/control in sysfs.
> + */
> + pm_runtime_forbid(dev);
> +
> + id = 0;
> + for_each_available_child_of_node(dev->of_node, child) {
> + if (of_node_name_eq(child, "dp-phy")) {
> + cfg = dp_cfg;
> + serdes = dp_serdes;
> + } else if (of_node_name_eq(child, "usb3-phy")) {
> + cfg = usb_cfg;
> + serdes = usb_serdes;
> + }
> +
> + /* Create per-lane phy */
> + ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg);
> + if (ret) {
> + dev_err(dev, "failed to create lane%d phy, %d\n",
> + id, ret);
> + goto err_node_put;
> + }
> +
> + /*
> + * Register the pipe clock provided by phy.
> + * See function description to see details of this pipe clock.
> + */
> + if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) {
> + ret = phy_pipe_clk_register(qmp, child);
> + if (ret) {
> + dev_err(qmp->dev,
> + "failed to register pipe clock source\n");
> + goto err_node_put;
> + }
> + } else if (cfg->type == PHY_TYPE_DP) {
> + ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
> + if (ret) {
> + dev_err(qmp->dev,
> + "failed to register DP clock source\n");
> + goto err_node_put;
> + }
> + }
> + id++;
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (!IS_ERR(phy_provider))
> + dev_info(dev, "Registered Qcom-QMP phy\n");
> + else
> + pm_runtime_disable(dev);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +
> +err_node_put:
> + pm_runtime_disable(dev);
> + of_node_put(child);
> + return ret;
> +}
> +
> +static struct platform_driver qcom_qmp_phy_driver = {
> + .probe = qcom_qmp_phy_probe,
> + .driver = {
> + .name = "qcom-qmp-phy",
> + .pm = &qcom_qmp_phy_pm_ops,
> + .of_match_table = qcom_qmp_phy_of_match_table,
> + },
> +};
> +
> +module_platform_driver(qcom_qmp_phy_driver);
> +
> +MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
> +MODULE_DESCRIPTION("Qualcomm QMP PHY driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> new file mode 100644
> index 000000000000..c7309e981bfb
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> @@ -0,0 +1,6350 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +
> +#include <dt-bindings/phy/phy.h>
> +
> +#include "phy-qcom-qmp.h"
> +
> +/* QPHY_SW_RESET bit */
> +#define SW_RESET BIT(0)
> +/* QPHY_POWER_DOWN_CONTROL */
> +#define SW_PWRDN BIT(0)
> +#define REFCLK_DRV_DSBL BIT(1)
> +/* QPHY_START_CONTROL bits */
> +#define SERDES_START BIT(0)
> +#define PCS_START BIT(1)
> +#define PLL_READY_GATE_EN BIT(3)
> +/* QPHY_PCS_STATUS bit */
> +#define PHYSTATUS BIT(6)
> +#define PHYSTATUS_4_20 BIT(7)
> +/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
> +#define PCS_READY BIT(0)
> +
> +/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
> +/* DP PHY soft reset */
> +#define SW_DPPHY_RESET BIT(0)
> +/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
> +#define SW_DPPHY_RESET_MUX BIT(1)
> +/* USB3 PHY soft reset */
> +#define SW_USB3PHY_RESET BIT(2)
> +/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
> +#define SW_USB3PHY_RESET_MUX BIT(3)
> +
> +/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
> +#define USB3_MODE BIT(0) /* enables USB3 mode */
> +#define DP_MODE BIT(1) /* enables DP mode */
> +
> +/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
> +#define ARCVR_DTCT_EN BIT(0)
> +#define ALFPS_DTCT_EN BIT(1)
> +#define ARCVR_DTCT_EVENT_SEL BIT(4)
> +
> +/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
> +#define IRQ_CLEAR BIT(0)
> +
> +/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
> +#define RCVR_DETECT BIT(0)
> +
> +/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
> +#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
> +
> +#define PHY_INIT_COMPLETE_TIMEOUT 10000
> +#define POWER_DOWN_DELAY_US_MIN 10
> +#define POWER_DOWN_DELAY_US_MAX 11
> +
> +#define MAX_PROP_NAME 32
> +
> +/* Define the assumed distance between lanes for underspecified device trees. */
> +#define QMP_PHY_LEGACY_LANE_STRIDE 0x400
> +
> +struct qmp_phy_init_tbl {
> + unsigned int offset;
> + unsigned int val;
> + /*
> + * register part of layout ?
> + * if yes, then offset gives index in the reg-layout
> + */
> + bool in_layout;
> + /*
> + * mask of lanes for which this register is written
> + * for cases when second lane needs different values
> + */
> + u8 lane_mask;
> +};
> +
> +#define QMP_PHY_INIT_CFG(o, v) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .lane_mask = 0xff, \
> + }
> +
> +#define QMP_PHY_INIT_CFG_L(o, v) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .in_layout = true, \
> + .lane_mask = 0xff, \
> + }
> +
> +#define QMP_PHY_INIT_CFG_LANE(o, v, l) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .lane_mask = l, \
> + }
> +
> +/* set of registers with offsets different per-PHY */
> +enum qphy_reg_layout {
> + /* Common block control registers */
> + QPHY_COM_SW_RESET,
> + QPHY_COM_POWER_DOWN_CONTROL,
> + QPHY_COM_START_CONTROL,
> + QPHY_COM_PCS_READY_STATUS,
> + /* PCS registers */
> + QPHY_PLL_LOCK_CHK_DLY_TIME,
> + QPHY_FLL_CNTRL1,
> + QPHY_FLL_CNTRL2,
> + QPHY_FLL_CNT_VAL_L,
> + QPHY_FLL_CNT_VAL_H_TOL,
> + QPHY_FLL_MAN_CODE,
> + QPHY_SW_RESET,
> + QPHY_START_CTRL,
> + QPHY_PCS_READY_STATUS,
> + QPHY_PCS_STATUS,
> + QPHY_PCS_AUTONOMOUS_MODE_CTRL,
> + QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
> + QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
> + QPHY_PCS_POWER_DOWN_CONTROL,
> + /* PCS_MISC registers */
> + QPHY_PCS_MISC_TYPEC_CTRL,
> + /* Keep last to ensure regs_layout arrays are properly initialized */
> + QPHY_LAYOUT_SIZE
> +};
> +
> +static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x168,
> +};
> +
> +static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> +};
> +
> +static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_COM_SW_RESET] = 0x400,
> + [QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
> + [QPHY_COM_START_CONTROL] = 0x408,
> + [QPHY_COM_PCS_READY_STATUS] = 0x448,
> + [QPHY_PLL_LOCK_CHK_DLY_TIME] = 0xa8,
> + [QPHY_FLL_CNTRL1] = 0xc4,
> + [QPHY_FLL_CNTRL2] = 0xc8,
> + [QPHY_FLL_CNT_VAL_L] = 0xcc,
> + [QPHY_FLL_CNT_VAL_H_TOL] = 0xd0,
> + [QPHY_FLL_MAN_CODE] = 0xd4,
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> +};
> +
> +static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_FLL_CNTRL1] = 0xc0,
> + [QPHY_FLL_CNTRL2] = 0xc4,
> + [QPHY_FLL_CNT_VAL_L] = 0xc8,
> + [QPHY_FLL_CNT_VAL_H_TOL] = 0xcc,
> + [QPHY_FLL_MAN_CODE] = 0xd0,
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x17c,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
> +};
> +
> +static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
> +};
> +
> +static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> +};
> +
> +static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x2ac,
> +};
> +
> +static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
> +};
> +
> +static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
> +};
> +
> +static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x1008,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
> +};
> +
> +static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
> + [QPHY_PCS_STATUS] = 0x174,
> + [QPHY_PCS_MISC_TYPEC_CTRL] = 0x00,
> +};
> +
> +static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x160,
> +};
> +
> +static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x168,
> +};
> +
> +static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> +};
> +
> +static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = QPHY_V4_PCS_UFS_PHY_START,
> + [QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_UFS_READY_STATUS,
> + [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET,
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + /* PLL and Loop filter settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + /* SSC settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c),
> + QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> +
> + QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05),
> +
> + QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05),
> + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04),
> + /* PLL and Loop filter settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + /* SSC settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER1, 0x7d),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE0, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x29),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x53),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x61),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
> + QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_EQ_CONFIG5, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
> + QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
> + QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> + QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
> + QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_POST, 0x58),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
> + QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
> + QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
> + QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
> + QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
> + QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x007),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_01, 0x59),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xbb),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG4, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2, 0x52),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4, 0x1a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5, 0x06),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SYSCLK_EN_SEL, 0x27),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BIAS_EN_CKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_ENABLE1, 0xb0),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE0, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_RESTRIM_CTRL2, 0x05),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VCO_TUNE_MAP, 0x10),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_SELECT, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_HSCLK_SEL1, 0x30),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORE_CLK_EN, 0x73),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SVS_MODE_CLK_SEL, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV1, 0x22),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV2, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BGV_TRIM, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BG_CTRL, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL0, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_TAP_EN, 0x0d),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TX_BAND_MODE, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_LANE_MODE, 0x1a),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PARALLEL_RATE, 0x2f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE0, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE1, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE2, 0x1b),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE2, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE0, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE1, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE2, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_THRESH_DFE, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CGA_THRESH_DFE, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXENGINE_EN0, 0x12),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_TRAIN_TIME, 0x25),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_DFE_OVRLP_TIME, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_REFRESH_TIME, 0x05),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_ENABLE_TIME, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_GAIN, 0x26),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_GAIN, 0x12),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_OFFSET_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PRE_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_INTVAL, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EDAC_INITVAL, 0x28),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB0, 0x7f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB1, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RCVRDONE_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_CTRL, 0x70),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE0, 0x8b),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE2, 0x0a),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE2, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_BAND, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE0, 0x5c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE1, 0x3e),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE2, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_ENABLES, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_CNTRL, 0xa0),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_DEGLITCH_CNTRL, 0x08),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DCC_GAIN, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_EN_SIGNAL, 0xc3),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PSM_RX_EN_CAL, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_MISC_CNTRL0, 0xbc),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TS0_TIMER, 0x7f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DLL_HIGHDATARATE, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RESETCODE_OFFSET, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_INITVAL, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RSM_START, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_rx_tbl[] = {
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_PCS_TX_RX_CONFIG, 0x50),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M3P5DB, 0x19),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M3P5DB, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M6DB, 0x17),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M6DB, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG5, 0x9f),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x50),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb5),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4c),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x64),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x1E),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0D),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5B),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_RX_PWM_GEAR_BAND, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_DRV_LVL, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),
> + QMP_PHY_INIT_CFG(QPHY_RX_SYM_RESYNC_CTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_POST_EMP_LVL, 0x12),
> + QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_POST_EMP_LVL, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL2, 0x6e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SYM_RESYNC_CTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL1, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_MIN_HIBERN8_TIME, 0x9a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
> +
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x94),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> +
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x5),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x6e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x39),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x39),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x35),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P6_P7_PRE, 0x33),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_EQ_CONFIG2, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x05),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG2, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x26),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x048),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x46),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_CFG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x50),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MISC1, 0x88),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTERNAL_DIG_CORECLK_DIV, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MODE, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_DC_LEVEL_CTRL, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x56),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x22),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_3, 0x13),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_VMODE_CTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_PI_QEC_CTRL, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_FO_GAIN_RATE2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_UCDR_PI_CONTROLS, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_3, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_VGA_CAL_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x27),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2, 0x5a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B0, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B1, 0xf9),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B3, 0xce),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B4, 0x62),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B0, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B1, 0x7d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B3, 0xcf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B4, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_PHPRE_CTRL, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_MARG_COARSE_CTRL2, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG2, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG4, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG5, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_EQ_CONFIG1, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G3_RXEQEVAL_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_RXEQEVAL_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG2, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0b),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x65),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xf5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf1),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x6d),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x6d),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xed),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x3c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xb7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0xb7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_INITVAL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_EQ_CONFIG2, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x46),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_CFG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0xd0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MISC1, 0x88),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_DC_LEVEL_CTRL, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xcc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xcc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x29),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0xc5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xad),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xb6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xc7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xef),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x81),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x05),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
> +};
> +
> +/* Register names should be validated, they might be different for this PHY */
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_EQ_CONFIG1, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3, 0x28),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
> +};
> +
> +struct qmp_phy;
> +
> +/* struct qmp_phy_cfg - per-PHY initialization config */
> +struct qmp_phy_cfg {
> + /* phy-type - PCIE/UFS/USB */
> + unsigned int type;
> + /* number of lanes provided by phy */
> + int nlanes;
> +
> + /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
> + const struct qmp_phy_init_tbl *serdes_tbl;
> + int serdes_tbl_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_sec;
> + int serdes_tbl_num_sec;
> + const struct qmp_phy_init_tbl *tx_tbl;
> + int tx_tbl_num;
> + const struct qmp_phy_init_tbl *tx_tbl_sec;
> + int tx_tbl_num_sec;
> + const struct qmp_phy_init_tbl *rx_tbl;
> + int rx_tbl_num;
> + const struct qmp_phy_init_tbl *rx_tbl_sec;
> + int rx_tbl_num_sec;
> + const struct qmp_phy_init_tbl *pcs_tbl;
> + int pcs_tbl_num;
> + const struct qmp_phy_init_tbl *pcs_tbl_sec;
> + int pcs_tbl_num_sec;
> + const struct qmp_phy_init_tbl *pcs_misc_tbl;
> + int pcs_misc_tbl_num;
> + const struct qmp_phy_init_tbl *pcs_misc_tbl_sec;
> + int pcs_misc_tbl_num_sec;
> +
> + /* Init sequence for DP PHY block link rates */
> + const struct qmp_phy_init_tbl *serdes_tbl_rbr;
> + int serdes_tbl_rbr_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr;
> + int serdes_tbl_hbr_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr2;
> + int serdes_tbl_hbr2_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
> + int serdes_tbl_hbr3_num;
> +
> + /* DP PHY callbacks */
> + int (*configure_dp_phy)(struct qmp_phy *qphy);
> + void (*configure_dp_tx)(struct qmp_phy *qphy);
> + int (*calibrate_dp_phy)(struct qmp_phy *qphy);
> + void (*dp_aux_init)(struct qmp_phy *qphy);
> +
> + /* clock ids to be requested */
> + const char * const *clk_list;
> + int num_clks;
> + /* resets to be requested */
> + const char * const *reset_list;
> + int num_resets;
> + /* regulators to be requested */
> + const char * const *vreg_list;
> + int num_vregs;
> +
> + /* array of registers with different offsets */
> + const unsigned int *regs;
> +
> + unsigned int start_ctrl;
> + unsigned int pwrdn_ctrl;
> + unsigned int mask_com_pcs_ready;
> + /* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
> + unsigned int phy_status;
> +
> + /* true, if PHY has a separate PHY_COM control block */
> + bool has_phy_com_ctrl;
> + /* true, if PHY has a reset for individual lanes */
> + bool has_lane_rst;
> + /* true, if PHY needs delay after POWER_DOWN */
> + bool has_pwrdn_delay;
> + /* power_down delay in usec */
> + int pwrdn_delay_min;
> + int pwrdn_delay_max;
> +
> + /* true, if PHY has a separate DP_COM control block */
> + bool has_phy_dp_com_ctrl;
> + /* true, if PHY has secondary tx/rx lanes to be configured */
> + bool is_dual_lane_phy;
> +
> + /* true, if PCS block has no separate SW_RESET register */
> + bool no_pcs_sw_reset;
> +};
> +
> +struct qmp_phy_combo_cfg {
> + const struct qmp_phy_cfg *usb_cfg;
> + const struct qmp_phy_cfg *dp_cfg;
> +};
> +
> +/**
> + * struct qmp_phy - per-lane phy descriptor
> + *
> + * @phy: generic phy
> + * @cfg: phy specific configuration
> + * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
> + * @tx: iomapped memory space for lane's tx
> + * @rx: iomapped memory space for lane's rx
> + * @pcs: iomapped memory space for lane's pcs
> + * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
> + * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> + * @pcs_misc: iomapped memory space for lane's pcs_misc
> + * @pipe_clk: pipe clock
> + * @index: lane index
> + * @qmp: QMP phy to which this lane belongs
> + * @lane_rst: lane's reset controller
> + * @mode: current PHY mode
> + * @dp_aux_cfg: Display port aux config
> + * @dp_opts: Display port optional config
> + * @dp_clks: Display port clocks
> + */
> +struct qmp_phy {
> + struct phy *phy;
> + const struct qmp_phy_cfg *cfg;
> + void __iomem *serdes;
> + void __iomem *tx;
> + void __iomem *rx;
> + void __iomem *pcs;
> + void __iomem *tx2;
> + void __iomem *rx2;
> + void __iomem *pcs_misc;
> + struct clk *pipe_clk;
> + unsigned int index;
> + struct qcom_qmp *qmp;
> + struct reset_control *lane_rst;
> + enum phy_mode mode;
> + unsigned int dp_aux_cfg;
> + struct phy_configure_opts_dp dp_opts;
> + struct qmp_phy_dp_clks *dp_clks;
> +};
> +
> +struct qmp_phy_dp_clks {
> + struct qmp_phy *qphy;
> + struct clk_hw dp_link_hw;
> + struct clk_hw dp_pixel_hw;
> +};
> +
> +/**
> + * struct qcom_qmp - structure holding QMP phy block attributes
> + *
> + * @dev: device
> + * @dp_com: iomapped memory space for phy's dp_com control block
> + *
> + * @clks: array of clocks required by phy
> + * @resets: array of resets required by phy
> + * @vregs: regulator supplies bulk data
> + *
> + * @phys: array of per-lane phy descriptors
> + * @phy_mutex: mutex lock for PHY common block initialization
> + * @init_count: phy common block initialization count
> + * @ufs_reset: optional UFS PHY reset handle
> + */
> +struct qcom_qmp {
> + struct device *dev;
> + void __iomem *dp_com;
> +
> + struct clk_bulk_data *clks;
> + struct reset_control **resets;
> + struct regulator_bulk_data *vregs;
> +
> + struct qmp_phy **phys;
> +
> + struct mutex phy_mutex;
> + int init_count;
> +
> + struct reset_control *ufs_reset;
> +};
> +
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
> +
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
> +
> +static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> +{
> + u32 reg;
> +
> + reg = readl(base + offset);
> + reg |= val;
> + writel(reg, base + offset);
> +
> + /* ensure that above write is through */
> + readl(base + offset);
> +}
> +
> +static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
> +{
> + u32 reg;
> +
> + reg = readl(base + offset);
> + reg &= ~val;
> + writel(reg, base + offset);
> +
> + /* ensure that above write is through */
> + readl(base + offset);
> +}
> +
> +/* list of clocks required by phy */
> +static const char * const msm8996_phy_clk_l[] = {
> + "aux", "cfg_ahb", "ref",
> +};
> +
> +static const char * const msm8996_ufs_phy_clk_l[] = {
> + "ref",
> +};
> +
> +static const char * const qmp_v3_phy_clk_l[] = {
> + "aux", "cfg_ahb", "ref", "com_aux",
> +};
> +
> +static const char * const sdm845_pciephy_clk_l[] = {
> + "aux", "cfg_ahb", "ref", "refgen",
> +};
> +
> +static const char * const qmp_v4_phy_clk_l[] = {
> + "aux", "ref_clk_src", "ref", "com_aux",
> +};
> +
> +/* the primary usb3 phy on sm8250 doesn't have a ref clock */
> +static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
> + "aux", "ref_clk_src", "com_aux"
> +};
> +
> +static const char * const sm8450_ufs_phy_clk_l[] = {
> + "qref", "ref", "ref_aux",
> +};
> +
> +static const char * const sdm845_ufs_phy_clk_l[] = {
> + "ref", "ref_aux",
> +};
> +
> +/* usb3 phy on sdx55 doesn't have com_aux clock */
> +static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
> + "aux", "cfg_ahb", "ref"
> +};
> +
> +static const char * const qcm2290_usb3phy_clk_l[] = {
> + "cfg_ahb", "ref", "com_aux",
> +};
> +
> +/* list of resets */
> +static const char * const msm8996_pciephy_reset_l[] = {
> + "phy", "common", "cfg",
> +};
> +
> +static const char * const msm8996_usb3phy_reset_l[] = {
> + "phy", "common",
> +};
> +
> +static const char * const sc7180_usb3phy_reset_l[] = {
> + "phy",
> +};
> +
> +static const char * const qcm2290_usb3phy_reset_l[] = {
> + "phy_phy", "phy",
> +};
> +
> +static const char * const sdm845_pciephy_reset_l[] = {
> + "phy",
> +};
> +
> +/* list of regulators */
> +static const char * const qmp_phy_vreg_l[] = {
> + "vdda-phy", "vdda-pll",
> +};
> +
> +static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq8074_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
> + .tx_tbl = msm8996_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
> + .rx_tbl = ipq8074_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq8074_usb3_rx_tbl),
> + .pcs_tbl = ipq8074_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq8074_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 3,
> +
> + .serdes_tbl = msm8996_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl),
> + .tx_tbl = msm8996_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl),
> + .rx_tbl = msm8996_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl),
> + .pcs_tbl = msm8996_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | PLL_READY_GATE_EN,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .mask_com_pcs_ready = PCS_READY,
> + .phy_status = PHYSTATUS,
> +
> + .has_phy_com_ctrl = true,
> + .has_lane_rst = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_ufs_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8996_ufs_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes_tbl),
> + .tx_tbl = msm8996_ufs_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx_tbl),
> + .rx_tbl = msm8996_ufs_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx_tbl),
> +
> + .clk_list = msm8996_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l),
> +
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> +
> + .regs = msm8996_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8996_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl),
> + .tx_tbl = msm8996_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
> + .rx_tbl = msm8996_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_usb3_rx_tbl),
> + .pcs_tbl = msm8996_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8996_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const char * const ipq8074_pciephy_clk_l[] = {
> + "aux", "cfg_ahb",
> +};
> +/* list of resets */
> +static const char * const ipq8074_pciephy_reset_l[] = {
> + "phy", "common",
> +};
> +
> +static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq8074_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
> + .tx_tbl = ipq8074_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_tx_tbl),
> + .rx_tbl = ipq8074_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
> + .pcs_tbl = ipq8074_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
> + .clk_list = ipq8074_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = NULL,
> + .num_vregs = 0,
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_phy_com_ctrl = false,
> + .has_lane_rst = false,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq6018_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
> + .tx_tbl = ipq6018_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(ipq6018_pcie_tx_tbl),
> + .rx_tbl = ipq6018_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
> + .pcs_tbl = ipq6018_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
> + .clk_list = ipq8074_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = NULL,
> + .num_vregs = 0,
> + .regs = ipq_pciephy_gen3_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> +
> + .has_phy_com_ctrl = false,
> + .has_lane_rst = false,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sdm845_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_serdes_tbl),
> + .tx_tbl = sdm845_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_tx_tbl),
> + .rx_tbl = sdm845_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_rx_tbl),
> + .pcs_tbl = sdm845_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sdm845_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_qmp_pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sdm845_qhp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_serdes_tbl),
> + .tx_tbl = sdm845_qhp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_tx_tbl),
> + .rx_tbl = sdm845_qhp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_rx_tbl),
> + .pcs_tbl = sdm845_qhp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_pcs_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_qhp_pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
> + .serdes_tbl_sec = sm8250_qmp_gen3x1_pcie_serdes_tbl,
> + .serdes_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_serdes_tbl),
> + .tx_tbl = sm8250_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
> + .rx_tbl = sm8250_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
> + .rx_tbl_sec = sm8250_qmp_gen3x1_pcie_rx_tbl,
> + .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_rx_tbl),
> + .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
> + .pcs_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_tbl,
> + .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
> + .pcs_misc_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
> + .tx_tbl = sm8250_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
> + .tx_tbl_sec = sm8250_qmp_gen3x2_pcie_tx_tbl,
> + .tx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_tx_tbl),
> + .rx_tbl = sm8250_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
> + .rx_tbl_sec = sm8250_qmp_gen3x2_pcie_rx_tbl,
> + .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_rx_tbl),
> + .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
> + .pcs_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_tbl,
> + .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
> + .pcs_misc_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> + .tx_tbl = qmp_v3_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
> + .usb_cfg = &sc7180_usb3phy_cfg,
> + .dp_cfg = &sc7180_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sdm845_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
> + .tx_tbl = sdm845_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
> + .rx_tbl = sdm845_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
> + .pcs_tbl = sdm845_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm6115_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
> + .tx_tbl = sm6115_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
> + .rx_tbl = sm6115_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
> + .pcs_tbl = sm6115_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm6115_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> +
> + .is_dual_lane_phy = false,
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8998_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl),
> + .tx_tbl = msm8998_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8998_pcie_tx_tbl),
> + .rx_tbl = msm8998_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8998_pcie_rx_tbl),
> + .pcs_tbl = msm8998_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8998_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
> + .tx_tbl = msm8998_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8998_usb3_tx_tbl),
> + .rx_tbl = msm8998_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
> + .pcs_tbl = msm8998_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8150_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
> + .tx_tbl = sm8150_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
> + .rx_tbl = sm8150_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
> + .pcs_tbl = sm8150_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8150_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_tx_tbl),
> + .rx_tbl = sm8150_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
> + .pcs_tbl = sm8150_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sc8180x_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_serdes_tbl),
> + .tx_tbl = sc8180x_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl),
> + .rx_tbl = sc8180x_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_rx_tbl),
> + .pcs_tbl = sc8180x_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sc8180x_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v4_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> + .tx_tbl = qmp_v4_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
> + .usb_cfg = &sm8150_usb3phy_cfg,
> + .dp_cfg = &sc8180x_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8150_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8150_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8250_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_tx_tbl),
> + .rx_tbl = sm8250_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
> + .pcs_tbl = sm8250_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8250_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8250_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v4_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> + .tx_tbl = qmp_v4_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
> + .usb_cfg = &sm8250_usb3phy_cfg,
> + .dp_cfg = &sm8250_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sdx55_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_tx_tbl),
> + .rx_tbl = sdx55_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_sdx55_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sdx55_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_serdes_tbl),
> + .tx_tbl = sdx55_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_tx_tbl),
> + .rx_tbl = sdx55_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_rx_tbl),
> + .pcs_tbl = sdx55_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sdx55_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS_4_20,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sdx65_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_tx_tbl),
> + .rx_tbl = sdx65_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_sdx55_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8350_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8350_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
> + .tx_tbl = sm8350_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
> + .rx_tbl = sm8350_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
> + .pcs_tbl = sm8350_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8350_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_tx_tbl),
> + .rx_tbl = sm8350_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl),
> + .pcs_tbl = sm8350_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl),
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8350_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8350_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8350_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8350_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
> + .tx_tbl = sm8350_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
> + .rx_tbl = sm8350_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
> + .pcs_tbl = sm8350_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
> + .clk_list = sm8450_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8450_qmp_gen3x1_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl),
> + .tx_tbl = sm8450_qmp_gen3x1_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl),
> + .rx_tbl = sm8450_qmp_gen3x1_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl),
> + .pcs_tbl = sm8450_qmp_gen3x1_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8450_qmp_gen4x2_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_serdes_tbl),
> + .tx_tbl = sm8450_qmp_gen4x2_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_tx_tbl),
> + .rx_tbl = sm8450_qmp_gen4x2_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_rx_tbl),
> + .pcs_tbl = sm8450_qmp_gen4x2_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8450_qmp_gen4x2_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS_4_20,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qcm2290_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
> + .tx_tbl = qcm2290_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qcm2290_usb3_tx_tbl),
> + .rx_tbl = qcm2290_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qcm2290_usb3_rx_tbl),
> + .pcs_tbl = qcm2290_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
> + .clk_list = qcm2290_usb3phy_clk_l,
> + .num_clks = ARRAY_SIZE(qcm2290_usb3phy_clk_l),
> + .reset_list = qcm2290_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qcm2290_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static void qcom_qmp_phy_configure_lane(void __iomem *base,
> + const unsigned int *regs,
> + const struct qmp_phy_init_tbl tbl[],
> + int num,
> + u8 lane_mask)
> +{
> + int i;
> + const struct qmp_phy_init_tbl *t = tbl;
> +
> + if (!t)
> + return;
> +
> + for (i = 0; i < num; i++, t++) {
> + if (!(t->lane_mask & lane_mask))
> + continue;
> +
> + if (t->in_layout)
> + writel(t->val, base + regs[t->offset]);
> + else
> + writel(t->val, base + t->offset);
> + }
> +}
> +
> +static void qcom_qmp_phy_configure(void __iomem *base,
> + const unsigned int *regs,
> + const struct qmp_phy_init_tbl tbl[],
> + int num)
> +{
> + qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff);
> +}
> +
> +static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
> + int serdes_tbl_num = cfg->serdes_tbl_num;
> + int ret;
> +
> + qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
> + if (cfg->serdes_tbl_sec)
> + qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
> + cfg->serdes_tbl_num_sec);
> +
> + if (cfg->type == PHY_TYPE_DP) {
> + switch (dp_opts->link_rate) {
> + case 1620:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_rbr,
> + cfg->serdes_tbl_rbr_num);
> + break;
> + case 2700:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr,
> + cfg->serdes_tbl_hbr_num);
> + break;
> + case 5400:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr2,
> + cfg->serdes_tbl_hbr2_num);
> + break;
> + case 8100:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr3,
> + cfg->serdes_tbl_hbr3_num);
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + }
> +
> +
> + if (cfg->has_phy_com_ctrl) {
> + void __iomem *status;
> + unsigned int mask, val;
> +
> + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
> + SERDES_START | PCS_START);
> +
> + status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
> + mask = cfg->mask_com_pcs_ready;
> +
> + ret = readl_poll_timeout(status, val, (val & mask), 10,
> + PHY_INIT_COMPLETE_TIMEOUT);
> + if (ret) {
> + dev_err(qmp->dev,
> + "phy common block init timed-out\n");
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + /* Turn on BIAS current for PHY/PLL */
> + writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
> + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
> + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_LANE_0_1_PWRDN |
> + DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
> + DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(QSERDES_V3_COM_BIAS_EN |
> + QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
> + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
> + QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
> + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0x24, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
> + writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
> + writel(0xbb, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
> + qphy->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
> + { 0x00, 0x0c, 0x15, 0x1a },
> + { 0x02, 0x0e, 0x16, 0xff },
> + { 0x02, 0x11, 0xff, 0xff },
> + { 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
> + { 0x02, 0x12, 0x16, 0x1a },
> + { 0x09, 0x19, 0x1f, 0xff },
> + { 0x10, 0x1f, 0xff, 0xff },
> + { 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> + { 0x00, 0x0c, 0x14, 0x19 },
> + { 0x00, 0x0b, 0x12, 0xff },
> + { 0x00, 0x0b, 0xff, 0xff },
> + { 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
> + { 0x08, 0x0f, 0x16, 0x1f },
> + { 0x11, 0x1e, 0x1f, 0xff },
> + { 0x19, 0x1f, 0xff, 0xff },
> + { 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
> + unsigned int drv_lvl_reg, unsigned int emp_post_reg)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + unsigned int v_level = 0, p_level = 0;
> + u8 voltage_swing_cfg, pre_emphasis_cfg;
> + int i;
> +
> + for (i = 0; i < dp_opts->lanes; i++) {
> + v_level = max(v_level, dp_opts->voltage[i]);
> + p_level = max(p_level, dp_opts->pre[i]);
> + }
> +
> + if (dp_opts->link_rate <= 2700) {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> + } else {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
> + }
> +
> + /* TODO: Move check to config check */
> + if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> + return -EINVAL;
> +
> + /* Enable MUX to use Cursor values from these registers */
> + voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> + pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> +
> + writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
> + writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
> + writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
> + writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 bias_en, drvr_en;
> +
> + if (qcom_qmp_phy_configure_dp_swing(qphy,
> + QSERDES_V3_TX_TX_DRV_LVL,
> + QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
> + return;
> +
> + if (dp_opts->lanes == 1) {
> + bias_en = 0x3e;
> + drvr_en = 0x13;
> + } else {
> + bias_en = 0x3f;
> + drvr_en = 0x10;
> + }
> +
> + writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> + writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> +}
> +
> +static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy)
> +{
> + u32 val;
> + bool reverse = false;
> +
> + val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
> +
> + /*
> + * TODO: Assume orientation is CC1 for now and two lanes, need to
> + * use type-c connector to understand orientation and lanes.
> + *
> + * Otherwise val changes to be like below if this code understood
> + * the orientation of the type-c cable.
> + *
> + * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
> + * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
> + * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
> + * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> + * if (orientation == ORIENTATION_CC2)
> + * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> + */
> + val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> + writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
> +
> + return reverse;
> +}
> +
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 phy_vco_div, status;
> + unsigned long pixel_freq;
> +
> + qcom_qmp_phy_configure_dp_mode(qphy);
> +
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> + writel(0x04, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
> + udelay(2000);
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000);
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> + static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
> + u8 val;
> +
> + qphy->dp_aux_cfg++;
> + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[qphy->dp_aux_cfg];
> +
> + writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + /* Turn on BIAS current for PHY/PLL */
> + writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
> + writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
> + writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
> + qphy->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + /* Program default values before writing proper values */
> + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +
> + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +
> + qcom_qmp_phy_configure_dp_swing(qphy,
> + QSERDES_V4_TX_TX_DRV_LVL,
> + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +}
> +
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 phy_vco_div, status;
> + unsigned long pixel_freq;
> + u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
> + bool reverse;
> +
> + writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
> +
> + reverse = qcom_qmp_phy_configure_dp_mode(qphy);
> +
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> +
> + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + /*
> + * At least for 7nm DP PHY this has to be done after enabling link
> + * clock.
> + */
> +
> + if (dp_opts->lanes == 1) {
> + bias0_en = reverse ? 0x3e : 0x15;
> + bias1_en = reverse ? 0x15 : 0x3e;
> + drvr0_en = reverse ? 0x13 : 0x10;
> + drvr1_en = reverse ? 0x10 : 0x13;
> + } else if (dp_opts->lanes == 2) {
> + bias0_en = reverse ? 0x3f : 0x15;
> + bias1_en = reverse ? 0x15 : 0x3f;
> + drvr0_en = 0x10;
> + drvr1_en = 0x10;
> + } else {
> + bias0_en = 0x3f;
> + bias1_en = 0x3f;
> + drvr0_en = 0x10;
> + drvr1_en = 0x10;
> + }
> +
> + writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
> + writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
> + writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
> + writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
> +
> + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
> + udelay(2000);
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
> + writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
> +
> + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +
> + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +
> + return 0;
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> + static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
> + u8 val;
> +
> + qphy->dp_aux_cfg++;
> + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[qphy->dp_aux_cfg];
> +
> + writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &opts->dp;
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
> + if (qphy->dp_opts.set_voltages) {
> + cfg->configure_dp_tx(qphy);
> + qphy->dp_opts.set_voltages = 0;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + if (cfg->calibrate_dp_phy)
> + return cfg->calibrate_dp_phy(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *dp_com = qmp->dp_com;
> + int ret, i;
> +
> + mutex_lock(&qmp->phy_mutex);
> + if (qmp->init_count++) {
> + mutex_unlock(&qmp->phy_mutex);
> + return 0;
> + }
> +
> + /* turn on regulator supplies */
> + ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
> + if (ret) {
> + dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
> + goto err_unlock;
> + }
> +
> + for (i = 0; i < cfg->num_resets; i++) {
> + ret = reset_control_assert(qmp->resets[i]);
> + if (ret) {
> + dev_err(qmp->dev, "%s reset assert failed\n",
> + cfg->reset_list[i]);
> + goto err_disable_regulators;
> + }
> + }
> +
> + for (i = cfg->num_resets - 1; i >= 0; i--) {
> + ret = reset_control_deassert(qmp->resets[i]);
> + if (ret) {
> + dev_err(qmp->dev, "%s reset deassert failed\n",
> + qphy->cfg->reset_list[i]);
> + goto err_assert_reset;
> + }
> + }
> +
> + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
> + if (ret)
> + goto err_assert_reset;
> +
> + if (cfg->has_phy_dp_com_ctrl) {
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
> + SW_PWRDN);
> + /* override hardware control for reset of qmp phy */
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +
> + /* Default type-c orientation, i.e CC1 */
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
> +
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
> + USB3_MODE | DP_MODE);
> +
> + /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
> + }
> +
> + if (cfg->has_phy_com_ctrl) {
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
> + SW_PWRDN);
> + } else {
> + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
> + qphy_setbits(pcs,
> + cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> + cfg->pwrdn_ctrl);
> + else
> + qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL,
> + cfg->pwrdn_ctrl);
> + }
> +
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +
> +err_assert_reset:
> + while (++i < cfg->num_resets)
> + reset_control_assert(qmp->resets[i]);
> +err_disable_regulators:
> + regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> +err_unlock:
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + int i = cfg->num_resets;
> +
> + mutex_lock(&qmp->phy_mutex);
> + if (--qmp->init_count) {
> + mutex_unlock(&qmp->phy_mutex);
> + return 0;
> + }
> +
> + reset_control_assert(qmp->ufs_reset);
> + if (cfg->has_phy_com_ctrl) {
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
> + SERDES_START | PCS_START);
> + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET],
> + SW_RESET);
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
> + SW_PWRDN);
> + }
> +
> + while (--i >= 0)
> + reset_control_assert(qmp->resets[i]);
> +
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> +
> + regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> +
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_init(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + int ret;
> + dev_vdbg(qmp->dev, "Initializing QMP phy\n");
> +
> + if (cfg->no_pcs_sw_reset) {
> + /*
> + * Get UFS reset, which is delayed until now to avoid a
> + * circular dependency where UFS needs its PHY, but the PHY
> + * needs this UFS reset.
> + */
> + if (!qmp->ufs_reset) {
> + qmp->ufs_reset =
> + devm_reset_control_get_exclusive(qmp->dev,
> + "ufsphy");
> +
> + if (IS_ERR(qmp->ufs_reset)) {
> + ret = PTR_ERR(qmp->ufs_reset);
> + dev_err(qmp->dev,
> + "failed to get UFS reset: %d\n",
> + ret);
> +
> + qmp->ufs_reset = NULL;
> + return ret;
> + }
> + }
> +
> + ret = reset_control_assert(qmp->ufs_reset);
> + if (ret)
> + return ret;
> + }
> +
> + ret = qcom_qmp_phy_com_init(qphy);
> + if (ret)
> + return ret;
> +
> + if (cfg->type == PHY_TYPE_DP)
> + cfg->dp_aux_init(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_power_on(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *tx = qphy->tx;
> + void __iomem *rx = qphy->rx;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> + void __iomem *status;
> + unsigned int mask, val, ready;
> + int ret;
> +
> + qcom_qmp_phy_serdes_init(qphy);
> +
> + if (cfg->has_lane_rst) {
> + ret = reset_control_deassert(qphy->lane_rst);
> + if (ret) {
> + dev_err(qmp->dev, "lane%d reset deassert failed\n",
> + qphy->index);
> + return ret;
> + }
> + }
> +
> + ret = clk_prepare_enable(qphy->pipe_clk);
> + if (ret) {
> + dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
> + goto err_reset_lane;
> + }
> +
> + /* Tx, Rx, and PCS configurations */
> + qcom_qmp_phy_configure_lane(tx, cfg->regs,
> + cfg->tx_tbl, cfg->tx_tbl_num, 1);
> + if (cfg->tx_tbl_sec)
> + qcom_qmp_phy_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
> + cfg->tx_tbl_num_sec, 1);
> +
> + /* Configuration for other LANE for USB-DP combo PHY */
> + if (cfg->is_dual_lane_phy) {
> + qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
> + cfg->tx_tbl, cfg->tx_tbl_num, 2);
> + if (cfg->tx_tbl_sec)
> + qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
> + cfg->tx_tbl_sec,
> + cfg->tx_tbl_num_sec, 2);
> + }
> +
> + /* Configure special DP tx tunings */
> + if (cfg->type == PHY_TYPE_DP)
> + cfg->configure_dp_tx(qphy);
> +
> + qcom_qmp_phy_configure_lane(rx, cfg->regs,
> + cfg->rx_tbl, cfg->rx_tbl_num, 1);
> + if (cfg->rx_tbl_sec)
> + qcom_qmp_phy_configure_lane(rx, cfg->regs,
> + cfg->rx_tbl_sec, cfg->rx_tbl_num_sec, 1);
> +
> + if (cfg->is_dual_lane_phy) {
> + qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
> + cfg->rx_tbl, cfg->rx_tbl_num, 2);
> + if (cfg->rx_tbl_sec)
> + qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
> + cfg->rx_tbl_sec,
> + cfg->rx_tbl_num_sec, 2);
> + }
> +
> + /* Configure link rate, swing, etc. */
> + if (cfg->type == PHY_TYPE_DP) {
> + cfg->configure_dp_phy(qphy);
> + } else {
> + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
> + if (cfg->pcs_tbl_sec)
> + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
> + cfg->pcs_tbl_num_sec);
> + }
> +
> + ret = reset_control_deassert(qmp->ufs_reset);
> + if (ret)
> + goto err_disable_pipe_clk;
> +
> + qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
> + cfg->pcs_misc_tbl_num);
> + if (cfg->pcs_misc_tbl_sec)
> + qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
> + cfg->pcs_misc_tbl_num_sec);
> +
> + /*
> + * Pull out PHY from POWER DOWN state.
> + * This is active low enable signal to power-down PHY.
> + */
> + if(cfg->type == PHY_TYPE_PCIE)
> + qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
> +
> + if (cfg->has_pwrdn_delay)
> + usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
> +
> + if (cfg->type != PHY_TYPE_DP) {
> + /* Pull PHY out of reset state */
> + if (!cfg->no_pcs_sw_reset)
> + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> + /* start SerDes and Phy-Coding-Sublayer */
> + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> +
> + if (cfg->type == PHY_TYPE_UFS) {
> + status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
> + mask = PCS_READY;
> + ready = PCS_READY;
> + } else {
> + status = pcs + cfg->regs[QPHY_PCS_STATUS];
> + mask = cfg->phy_status;
> + ready = 0;
> + }
> +
> + ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
> + PHY_INIT_COMPLETE_TIMEOUT);
> + if (ret) {
> + dev_err(qmp->dev, "phy initialization timed-out\n");
> + goto err_disable_pipe_clk;
> + }
> + }
> + return 0;
> +
> +err_disable_pipe_clk:
> + clk_disable_unprepare(qphy->pipe_clk);
> +err_reset_lane:
> + if (cfg->has_lane_rst)
> + reset_control_assert(qphy->lane_rst);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_power_off(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + clk_disable_unprepare(qphy->pipe_clk);
> +
> + if (cfg->type == PHY_TYPE_DP) {
> + /* Assert DP PHY power down */
> + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> + } else {
> + /* PHY reset */
> + if (!cfg->no_pcs_sw_reset)
> + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> +
> + /* stop SerDes and Phy-Coding-Sublayer */
> + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> +
> + /* Put PHY into POWER DOWN state: active low */
> + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
> + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> + cfg->pwrdn_ctrl);
> + } else {
> + qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL,
> + cfg->pwrdn_ctrl);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_exit(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + if (cfg->has_lane_rst)
> + reset_control_assert(qphy->lane_rst);
> +
> + qcom_qmp_phy_com_exit(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_enable(struct phy *phy)
> +{
> + int ret;
> +
> + ret = qcom_qmp_phy_init(phy);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_power_on(phy);
> + if (ret)
> + qcom_qmp_phy_exit(phy);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_disable(struct phy *phy)
> +{
> + int ret;
> +
> + ret = qcom_qmp_phy_power_off(phy);
> + if (ret)
> + return ret;
> + return qcom_qmp_phy_exit(phy);
> +}
> +
> +static int qcom_qmp_phy_set_mode(struct phy *phy,
> + enum phy_mode mode, int submode)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> +
> + qphy->mode = mode;
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> + u32 intr_mask;
> +
> + if (qphy->mode == PHY_MODE_USB_HOST_SS ||
> + qphy->mode == PHY_MODE_USB_DEVICE_SS)
> + intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
> + else
> + intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
> +
> + /* Clear any pending interrupts status */
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> + /* Writing 1 followed by 0 clears the interrupt */
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> +
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
> + ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
> +
> + /* Enable required PHY autonomous mode interrupts */
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
> +
> + /* Enable i/o clamp_n for autonomous mode */
> + if (pcs_misc)
> + qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
> +}
> +
> +static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> +
> + /* Disable i/o clamp_n on resume for normal mode */
> + if (pcs_misc)
> + qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
> +
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
> + ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
> +
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> + /* Writing 1 followed by 0 clears the interrupt */
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> +}
> +
> +static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct qmp_phy *qphy = qmp->phys[0];
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
> +
> + /* Supported only for USB3 PHY and luckily USB3 is the first phy */
> + if (cfg->type != PHY_TYPE_USB3)
> + return 0;
> +
> + if (!qmp->init_count) {
> + dev_vdbg(dev, "PHY not initialized, bailing out\n");
> + return 0;
> + }
> +
> + qcom_qmp_phy_enable_autonomous_mode(qphy);
> +
> + clk_disable_unprepare(qphy->pipe_clk);
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct qmp_phy *qphy = qmp->phys[0];
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + int ret = 0;
> +
> + dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
> +
> + /* Supported only for USB3 PHY and luckily USB3 is the first phy */
> + if (cfg->type != PHY_TYPE_USB3)
> + return 0;
> +
> + if (!qmp->init_count) {
> + dev_vdbg(dev, "PHY not initialized, bailing out\n");
> + return 0;
> + }
> +
> + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(qphy->pipe_clk);
> + if (ret) {
> + dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> + return ret;
> + }
> +
> + qcom_qmp_phy_disable_autonomous_mode(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int num = cfg->num_vregs;
> + int i;
> +
> + qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
> + if (!qmp->vregs)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++)
> + qmp->vregs[i].supply = cfg->vreg_list[i];
> +
> + return devm_regulator_bulk_get(dev, num, qmp->vregs);
> +}
> +
> +static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int i;
> +
> + qmp->resets = devm_kcalloc(dev, cfg->num_resets,
> + sizeof(*qmp->resets), GFP_KERNEL);
> + if (!qmp->resets)
> + return -ENOMEM;
> +
> + for (i = 0; i < cfg->num_resets; i++) {
> + struct reset_control *rst;
> + const char *name = cfg->reset_list[i];
> +
> + rst = devm_reset_control_get_exclusive(dev, name);
> + if (IS_ERR(rst)) {
> + dev_err(dev, "failed to get %s reset\n", name);
> + return PTR_ERR(rst);
> + }
> + qmp->resets[i] = rst;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int num = cfg->num_clks;
> + int i;
> +
> + qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
> + if (!qmp->clks)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++)
> + qmp->clks[i].id = cfg->clk_list[i];
> +
> + return devm_clk_bulk_get(dev, num, qmp->clks);
> +}
> +
> +static void phy_clk_release_provider(void *res)
> +{
> + of_clk_del_provider(res);
> +}
> +
> +/*
> + * Register a fixed rate pipe clock.
> + *
> + * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
> + * controls it. The <s>_pipe_clk coming out of the GCC is requested
> + * by the PHY driver for its operations.
> + * We register the <s>_pipe_clksrc here. The gcc driver takes care
> + * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
> + * Below picture shows this relationship.
> + *
> + * +---------------+
> + * | PHY block |<<---------------------------------------+
> + * | | |
> + * | +-------+ | +-----+ |
> + * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
> + * clk | +-------+ | +-----+
> + * +---------------+
> + */
> +static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
> +{
> + struct clk_fixed_rate *fixed;
> + struct clk_init_data init = { };
> + int ret;
> +
> + ret = of_property_read_string(np, "clock-output-names", &init.name);
> + if (ret) {
> + dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
> + return ret;
> + }
> +
> + fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
> + if (!fixed)
> + return -ENOMEM;
> +
> + init.ops = &clk_fixed_rate_ops;
> +
> + /* controllers using QMP phys use 125MHz pipe clock interface */
> + fixed->fixed_rate = 125000000;
> + fixed->hw.init = &init;
> +
> + ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
> + if (ret)
> + return ret;
> +
> + ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
> + if (ret)
> + return ret;
> +
> + /*
> + * Roll a devm action because the clock provider is the child node, but
> + * the child node is not actually a device.
> + */
> + return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
> +}
> +
> +/*
> + * Display Port PLL driver block diagram for branch clocks
> + *
> + * +------------------------------+
> + * | DP_VCO_CLK |
> + * | |
> + * | +-------------------+ |
> + * | | (DP PLL/VCO) | |
> + * | +---------+---------+ |
> + * | v |
> + * | +----------+-----------+ |
> + * | | hsclk_divsel_clk_src | |
> + * | +----------+-----------+ |
> + * +------------------------------+
> + * |
> + * +---------<---------v------------>----------+
> + * | |
> + * +--------v----------------+ |
> + * | dp_phy_pll_link_clk | |
> + * | link_clk | |
> + * +--------+----------------+ |
> + * | |
> + * | |
> + * v v
> + * Input to DISPCC block |
> + * for link clk, crypto clk |
> + * and interface clock |
> + * |
> + * |
> + * +--------<------------+-----------------+---<---+
> + * | | |
> + * +----v---------+ +--------v-----+ +--------v------+
> + * | vco_divided | | vco_divided | | vco_divided |
> + * | _clk_src | | _clk_src | | _clk_src |
> + * | | | | | |
> + * |divsel_six | | divsel_two | | divsel_four |
> + * +-------+------+ +-----+--------+ +--------+------+
> + * | | |
> + * v---->----------v-------------<------v
> + * |
> + * +----------+-----------------+
> + * | dp_phy_pll_vco_div_clk |
> + * +---------+------------------+
> + * |
> + * v
> + * Input to DISPCC block
> + * for DP pixel clock
> + *
> + */
> +static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + switch (req->rate) {
> + case 1620000000UL / 2:
> + case 2700000000UL / 2:
> + /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned long
> +qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + const struct qmp_phy_dp_clks *dp_clks;
> + const struct qmp_phy *qphy;
> + const struct phy_configure_opts_dp *dp_opts;
> +
> + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
> + qphy = dp_clks->qphy;
> + dp_opts = &qphy->dp_opts;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + return 1620000000UL / 2;
> + case 2700:
> + return 2700000000UL / 2;
> + case 5400:
> + return 5400000000UL / 4;
> + case 8100:
> + return 8100000000UL / 6;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = {
> + .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate,
> + .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate,
> +};
> +
> +static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + switch (req->rate) {
> + case 162000000:
> + case 270000000:
> + case 540000000:
> + case 810000000:
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned long
> +qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + const struct qmp_phy_dp_clks *dp_clks;
> + const struct qmp_phy *qphy;
> + const struct phy_configure_opts_dp *dp_opts;
> +
> + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
> + qphy = dp_clks->qphy;
> + dp_opts = &qphy->dp_opts;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + case 2700:
> + case 5400:
> + case 8100:
> + return dp_opts->link_rate * 100000;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct clk_ops qcom_qmp_dp_link_clk_ops = {
> + .determine_rate = qcom_qmp_dp_link_clk_determine_rate,
> + .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate,
> +};
> +
> +static struct clk_hw *
> +qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
> +{
> + struct qmp_phy_dp_clks *dp_clks = data;
> + unsigned int idx = clkspec->args[0];
> +
> + if (idx >= 2) {
> + pr_err("%s: invalid index %u\n", __func__, idx);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + if (idx == 0)
> + return &dp_clks->dp_link_hw;
> +
> + return &dp_clks->dp_pixel_hw;
> +}
> +
> +static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
> + struct device_node *np)
> +{
> + struct clk_init_data init = { };
> + struct qmp_phy_dp_clks *dp_clks;
> + char name[64];
> + int ret;
> +
> + dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
> + if (!dp_clks)
> + return -ENOMEM;
> +
> + dp_clks->qphy = qphy;
> + qphy->dp_clks = dp_clks;
> +
> + snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
> + init.ops = &qcom_qmp_dp_link_clk_ops;
> + init.name = name;
> + dp_clks->dp_link_hw.init = &init;
> + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
> + if (ret)
> + return ret;
> +
> + snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev));
> + init.ops = &qcom_qmp_dp_pixel_clk_ops;
> + init.name = name;
> + dp_clks->dp_pixel_hw.init = &init;
> + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
> + if (ret)
> + return ret;
> +
> + ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks);
> + if (ret)
> + return ret;
> +
> + /*
> + * Roll a devm action because the clock provider is the child node, but
> + * the child node is not actually a device.
> + */
> + return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
> +}
> +
> +static const struct phy_ops qcom_qmp_phy_gen_ops = {
> + .init = qcom_qmp_phy_enable,
> + .exit = qcom_qmp_phy_disable,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct phy_ops qcom_qmp_phy_dp_ops = {
> + .init = qcom_qmp_phy_init,
> + .configure = qcom_qmp_dp_phy_configure,
> + .power_on = qcom_qmp_phy_power_on,
> + .calibrate = qcom_qmp_dp_phy_calibrate,
> + .power_off = qcom_qmp_phy_power_off,
> + .exit = qcom_qmp_phy_exit,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
> + .power_on = qcom_qmp_phy_enable,
> + .power_off = qcom_qmp_phy_disable,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static void qcom_qmp_reset_control_put(void *data)
> +{
> + reset_control_put(data);
> +}
> +
> +static
> +int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
> + void __iomem *serdes, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct phy *generic_phy;
> + struct qmp_phy *qphy;
> + const struct phy_ops *ops;
> + char prop_name[MAX_PROP_NAME];
> + int ret;
> +
> + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
> + if (!qphy)
> + return -ENOMEM;
> +
> + qphy->cfg = cfg;
> + qphy->serdes = serdes;
> + /*
> + * Get memory resources for each phy lane:
> + * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
> + * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
> + * For single lane PHYs: pcs_misc (optional) -> 3.
> + */
> + qphy->tx = of_iomap(np, 0);
> + if (!qphy->tx)
> + return -ENOMEM;
> +
> + qphy->rx = of_iomap(np, 1);
> + if (!qphy->rx)
> + return -ENOMEM;
> +
> + qphy->pcs = of_iomap(np, 2);
> + if (!qphy->pcs)
> + return -ENOMEM;
> +
> + /*
> + * If this is a dual-lane PHY, then there should be registers for the
> + * second lane. Some old device trees did not specify this, so fall
> + * back to old legacy behavior of assuming they can be reached at an
> + * offset from the first lane.
> + */
> + if (cfg->is_dual_lane_phy) {
> + qphy->tx2 = of_iomap(np, 3);
> + qphy->rx2 = of_iomap(np, 4);
> + if (!qphy->tx2 || !qphy->rx2) {
> + dev_warn(dev,
> + "Underspecified device tree, falling back to legacy register regions\n");
> +
> + /* In the old version, pcs_misc is at index 3. */
> + qphy->pcs_misc = qphy->tx2;
> + qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
> + qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
> +
> + } else {
> + qphy->pcs_misc = of_iomap(np, 5);
> + }
> +
> + } else {
> + qphy->pcs_misc = of_iomap(np, 3);
> + }
> +
> + if (!qphy->pcs_misc)
> + dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
> +
> + /*
> + * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
> + * based phys, so they essentially have pipe clock. So,
> + * we return error in case phy is USB3 or PIPE type.
> + * Otherwise, we initialize pipe clock to NULL for
> + * all phys that don't need this.
> + */
> + snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
> + qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
> + if (IS_ERR(qphy->pipe_clk)) {
> + if (cfg->type == PHY_TYPE_PCIE ||
> + cfg->type == PHY_TYPE_USB3) {
> + ret = PTR_ERR(qphy->pipe_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev,
> + "failed to get lane%d pipe_clk, %d\n",
> + id, ret);
> + return ret;
> + }
> + qphy->pipe_clk = NULL;
> + }
> +
> + /* Get lane reset, if any */
> + if (cfg->has_lane_rst) {
> + snprintf(prop_name, sizeof(prop_name), "lane%d", id);
> + qphy->lane_rst = of_reset_control_get_exclusive(np, prop_name);
> + if (IS_ERR(qphy->lane_rst)) {
> + dev_err(dev, "failed to get lane%d reset\n", id);
> + return PTR_ERR(qphy->lane_rst);
> + }
> + ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put,
> + qphy->lane_rst);
> + if (ret)
> + return ret;
> + }
> +
> + if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE)
> + ops = &qcom_qmp_pcie_ufs_ops;
> + else if (cfg->type == PHY_TYPE_DP)
> + ops = &qcom_qmp_phy_dp_ops;
> + else
> + ops = &qcom_qmp_phy_gen_ops;
> +
> + generic_phy = devm_phy_create(dev, np, ops);
> + if (IS_ERR(generic_phy)) {
> + ret = PTR_ERR(generic_phy);
> + dev_err(dev, "failed to create qphy %d\n", ret);
> + return ret;
> + }
> +
> + qphy->phy = generic_phy;
> + qphy->index = id;
> + qphy->qmp = qmp;
> + qmp->phys[id] = qphy;
> + phy_set_drvdata(generic_phy, qphy);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
> + {
> + .compatible = "qcom,ipq8074-qmp-usb3-phy",
> + .data = &ipq8074_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-pcie-phy",
> + .data = &msm8996_pciephy_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-ufs-phy",
> + .data = &msm8996_ufs_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-usb3-phy",
> + .data = &msm8996_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-pcie-phy",
> + .data = &msm8998_pciephy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,ipq8074-qmp-pcie-phy",
> + .data = &ipq8074_pciephy_cfg,
> + }, {
> + .compatible = "qcom,ipq6018-qmp-pcie-phy",
> + .data = &ipq6018_pciephy_cfg,
> + }, {
> + .compatible = "qcom,ipq6018-qmp-usb3-phy",
> + .data = &ipq8074_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc7180-qmp-usb3-phy",
> + .data = &sc7180_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sc8180x-qmp-pcie-phy",
> + .data = &sc8180x_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sc8280xp-qmp-ufs-phy",
> + .data = &sm8350_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-usb3-phy",
> + .data = &sm8150_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sdm845-qhp-pcie-phy",
> + .data = &sdm845_qhp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-pcie-phy",
> + .data = &sdm845_qmp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-usb3-phy",
> + .data = &qmp_v3_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-usb3-uni-phy",
> + .data = &qmp_v3_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-usb3-phy",
> + .data = &msm8998_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm6115-qmp-ufs-phy",
> + .data = &sm6115_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm6350-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-usb3-phy",
> + .data = &sm8150_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-usb3-uni-phy",
> + .data = &sm8150_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-phy",
> + .data = &sm8250_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-uni-phy",
> + .data = &sm8250_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy",
> + .data = &sm8250_qmp_gen3x1_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy",
> + .data = &sm8250_qmp_gen3x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-ufs-phy",
> + .data = &sm8350_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-modem-pcie-phy",
> + .data = &sm8250_qmp_gen3x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdx55-qmp-pcie-phy",
> + .data = &sdx55_qmp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdx55-qmp-usb3-uni-phy",
> + .data = &sdx55_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sdx65-qmp-usb3-uni-phy",
> + .data = &sdx65_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-usb3-phy",
> + .data = &sm8350_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-usb3-uni-phy",
> + .data = &sm8350_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
> + .data = &sm8450_qmp_gen3x1_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
> + .data = &sm8450_qmp_gen4x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-ufs-phy",
> + .data = &sm8450_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-usb3-phy",
> + .data = &sm8350_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,qcm2290-qmp-usb3-phy",
> + .data = &qcm2290_usb3phy_cfg,
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
> +
> +static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
> + {
> + .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
> + .data = &sc7180_usb3dpphy_cfg,
> + },
> + {
> + .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> + .data = &sm8250_usb3dpphy_cfg,
> + },
> + {
> + .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
> + .data = &sc8180x_usb3dpphy_cfg,
> + },
> + { }
> +};
> +
> +static const struct dev_pm_ops qcom_qmp_phy_pm_ops = {
> + SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend,
> + qcom_qmp_phy_runtime_resume, NULL)
> +};
> +
> +static int qcom_qmp_phy_probe(struct platform_device *pdev)
> +{
> + struct qcom_qmp *qmp;
> + struct device *dev = &pdev->dev;
> + struct device_node *child;
> + struct phy_provider *phy_provider;
> + void __iomem *serdes;
> + void __iomem *usb_serdes;
> + void __iomem *dp_serdes = NULL;
> + const struct qmp_phy_combo_cfg *combo_cfg = NULL;
> + const struct qmp_phy_cfg *cfg = NULL;
> + const struct qmp_phy_cfg *usb_cfg = NULL;
> + const struct qmp_phy_cfg *dp_cfg = NULL;
> + int num, id, expected_phys;
> + int ret;
> +
> + qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
> + if (!qmp)
> + return -ENOMEM;
> +
> + qmp->dev = dev;
> + dev_set_drvdata(dev, qmp);
> +
> + /* Get the specific init parameters of QMP phy */
> + cfg = of_device_get_match_data(dev);
> + if (!cfg) {
> + const struct of_device_id *match;
> +
> + match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev);
> + if (!match)
> + return -EINVAL;
> +
> + combo_cfg = match->data;
> + if (!combo_cfg)
> + return -EINVAL;
> +
> + usb_cfg = combo_cfg->usb_cfg;
> + cfg = usb_cfg; /* Setup clks and regulators */
> + }
> +
> + /* per PHY serdes; usually located at base address */
> + usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(serdes))
> + return PTR_ERR(serdes);
> +
> + /* per PHY dp_com; if PHY has dp_com control block */
> + if (combo_cfg || cfg->has_phy_dp_com_ctrl) {
> + qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
> + if (IS_ERR(qmp->dp_com))
> + return PTR_ERR(qmp->dp_com);
> + }
> +
> + if (combo_cfg) {
> + /* Only two serdes for combo PHY */
> + dp_serdes = devm_platform_ioremap_resource(pdev, 2);
> + if (IS_ERR(dp_serdes))
> + return PTR_ERR(dp_serdes);
> +
> + dp_cfg = combo_cfg->dp_cfg;
> + expected_phys = 2;
> + } else {
> + expected_phys = cfg->nlanes;
> + }
> +
> + mutex_init(&qmp->phy_mutex);
> +
> + ret = qcom_qmp_phy_clk_init(dev, cfg);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_reset_init(dev, cfg);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_vreg_init(dev, cfg);
> + if (ret) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "failed to get regulator supplies: %d\n",
> + ret);
> + return ret;
> + }
> +
> + num = of_get_available_child_count(dev->of_node);
> + /* do we have a rogue child node ? */
> + if (num > expected_phys)
> + return -EINVAL;
> +
> + qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
> + if (!qmp->phys)
> + return -ENOMEM;
> +
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> + /*
> + * Prevent runtime pm from being ON by default. Users can enable
> + * it using power/control in sysfs.
> + */
> + pm_runtime_forbid(dev);
> +
> + id = 0;
> + for_each_available_child_of_node(dev->of_node, child) {
> + if (of_node_name_eq(child, "dp-phy")) {
> + cfg = dp_cfg;
> + serdes = dp_serdes;
> + } else if (of_node_name_eq(child, "usb3-phy")) {
> + cfg = usb_cfg;
> + serdes = usb_serdes;
> + }
> +
> + /* Create per-lane phy */
> + ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg);
> + if (ret) {
> + dev_err(dev, "failed to create lane%d phy, %d\n",
> + id, ret);
> + goto err_node_put;
> + }
> +
> + /*
> + * Register the pipe clock provided by phy.
> + * See function description to see details of this pipe clock.
> + */
> + if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) {
> + ret = phy_pipe_clk_register(qmp, child);
> + if (ret) {
> + dev_err(qmp->dev,
> + "failed to register pipe clock source\n");
> + goto err_node_put;
> + }
> + } else if (cfg->type == PHY_TYPE_DP) {
> + ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
> + if (ret) {
> + dev_err(qmp->dev,
> + "failed to register DP clock source\n");
> + goto err_node_put;
> + }
> + }
> + id++;
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (!IS_ERR(phy_provider))
> + dev_info(dev, "Registered Qcom-QMP phy\n");
> + else
> + pm_runtime_disable(dev);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +
> +err_node_put:
> + pm_runtime_disable(dev);
> + of_node_put(child);
> + return ret;
> +}
> +
> +static struct platform_driver qcom_qmp_phy_driver = {
> + .probe = qcom_qmp_phy_probe,
> + .driver = {
> + .name = "qcom-qmp-phy",
> + .pm = &qcom_qmp_phy_pm_ops,
> + .of_match_table = qcom_qmp_phy_of_match_table,
> + },
> +};
> +
> +module_platform_driver(qcom_qmp_phy_driver);
> +
> +MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
> +MODULE_DESCRIPTION("Qualcomm QMP PHY driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> new file mode 100644
> index 000000000000..c7309e981bfb
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> @@ -0,0 +1,6350 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +
> +#include <dt-bindings/phy/phy.h>
> +
> +#include "phy-qcom-qmp.h"
> +
> +/* QPHY_SW_RESET bit */
> +#define SW_RESET BIT(0)
> +/* QPHY_POWER_DOWN_CONTROL */
> +#define SW_PWRDN BIT(0)
> +#define REFCLK_DRV_DSBL BIT(1)
> +/* QPHY_START_CONTROL bits */
> +#define SERDES_START BIT(0)
> +#define PCS_START BIT(1)
> +#define PLL_READY_GATE_EN BIT(3)
> +/* QPHY_PCS_STATUS bit */
> +#define PHYSTATUS BIT(6)
> +#define PHYSTATUS_4_20 BIT(7)
> +/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
> +#define PCS_READY BIT(0)
> +
> +/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
> +/* DP PHY soft reset */
> +#define SW_DPPHY_RESET BIT(0)
> +/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
> +#define SW_DPPHY_RESET_MUX BIT(1)
> +/* USB3 PHY soft reset */
> +#define SW_USB3PHY_RESET BIT(2)
> +/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
> +#define SW_USB3PHY_RESET_MUX BIT(3)
> +
> +/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
> +#define USB3_MODE BIT(0) /* enables USB3 mode */
> +#define DP_MODE BIT(1) /* enables DP mode */
> +
> +/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
> +#define ARCVR_DTCT_EN BIT(0)
> +#define ALFPS_DTCT_EN BIT(1)
> +#define ARCVR_DTCT_EVENT_SEL BIT(4)
> +
> +/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
> +#define IRQ_CLEAR BIT(0)
> +
> +/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
> +#define RCVR_DETECT BIT(0)
> +
> +/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
> +#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
> +
> +#define PHY_INIT_COMPLETE_TIMEOUT 10000
> +#define POWER_DOWN_DELAY_US_MIN 10
> +#define POWER_DOWN_DELAY_US_MAX 11
> +
> +#define MAX_PROP_NAME 32
> +
> +/* Define the assumed distance between lanes for underspecified device trees. */
> +#define QMP_PHY_LEGACY_LANE_STRIDE 0x400
> +
> +struct qmp_phy_init_tbl {
> + unsigned int offset;
> + unsigned int val;
> + /*
> + * register part of layout ?
> + * if yes, then offset gives index in the reg-layout
> + */
> + bool in_layout;
> + /*
> + * mask of lanes for which this register is written
> + * for cases when second lane needs different values
> + */
> + u8 lane_mask;
> +};
> +
> +#define QMP_PHY_INIT_CFG(o, v) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .lane_mask = 0xff, \
> + }
> +
> +#define QMP_PHY_INIT_CFG_L(o, v) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .in_layout = true, \
> + .lane_mask = 0xff, \
> + }
> +
> +#define QMP_PHY_INIT_CFG_LANE(o, v, l) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .lane_mask = l, \
> + }
> +
> +/* set of registers with offsets different per-PHY */
> +enum qphy_reg_layout {
> + /* Common block control registers */
> + QPHY_COM_SW_RESET,
> + QPHY_COM_POWER_DOWN_CONTROL,
> + QPHY_COM_START_CONTROL,
> + QPHY_COM_PCS_READY_STATUS,
> + /* PCS registers */
> + QPHY_PLL_LOCK_CHK_DLY_TIME,
> + QPHY_FLL_CNTRL1,
> + QPHY_FLL_CNTRL2,
> + QPHY_FLL_CNT_VAL_L,
> + QPHY_FLL_CNT_VAL_H_TOL,
> + QPHY_FLL_MAN_CODE,
> + QPHY_SW_RESET,
> + QPHY_START_CTRL,
> + QPHY_PCS_READY_STATUS,
> + QPHY_PCS_STATUS,
> + QPHY_PCS_AUTONOMOUS_MODE_CTRL,
> + QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
> + QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
> + QPHY_PCS_POWER_DOWN_CONTROL,
> + /* PCS_MISC registers */
> + QPHY_PCS_MISC_TYPEC_CTRL,
> + /* Keep last to ensure regs_layout arrays are properly initialized */
> + QPHY_LAYOUT_SIZE
> +};
> +
> +static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x168,
> +};
> +
> +static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> +};
> +
> +static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_COM_SW_RESET] = 0x400,
> + [QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
> + [QPHY_COM_START_CONTROL] = 0x408,
> + [QPHY_COM_PCS_READY_STATUS] = 0x448,
> + [QPHY_PLL_LOCK_CHK_DLY_TIME] = 0xa8,
> + [QPHY_FLL_CNTRL1] = 0xc4,
> + [QPHY_FLL_CNTRL2] = 0xc8,
> + [QPHY_FLL_CNT_VAL_L] = 0xcc,
> + [QPHY_FLL_CNT_VAL_H_TOL] = 0xd0,
> + [QPHY_FLL_MAN_CODE] = 0xd4,
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> +};
> +
> +static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_FLL_CNTRL1] = 0xc0,
> + [QPHY_FLL_CNTRL2] = 0xc4,
> + [QPHY_FLL_CNT_VAL_L] = 0xc8,
> + [QPHY_FLL_CNT_VAL_H_TOL] = 0xcc,
> + [QPHY_FLL_MAN_CODE] = 0xd0,
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x17c,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
> +};
> +
> +static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
> +};
> +
> +static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> +};
> +
> +static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x2ac,
> +};
> +
> +static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
> +};
> +
> +static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
> +};
> +
> +static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x1008,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
> +};
> +
> +static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
> + [QPHY_PCS_STATUS] = 0x174,
> + [QPHY_PCS_MISC_TYPEC_CTRL] = 0x00,
> +};
> +
> +static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x160,
> +};
> +
> +static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x168,
> +};
> +
> +static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> +};
> +
> +static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = QPHY_V4_PCS_UFS_PHY_START,
> + [QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_UFS_READY_STATUS,
> + [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET,
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + /* PLL and Loop filter settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + /* SSC settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c),
> + QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> +
> + QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05),
> +
> + QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05),
> + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04),
> + /* PLL and Loop filter settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + /* SSC settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER1, 0x7d),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE0, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x29),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x53),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x61),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
> + QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_EQ_CONFIG5, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
> + QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
> + QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> + QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
> + QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_POST, 0x58),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
> + QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
> + QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
> + QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
> + QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
> + QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x007),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_01, 0x59),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xbb),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG4, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2, 0x52),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4, 0x1a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5, 0x06),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SYSCLK_EN_SEL, 0x27),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BIAS_EN_CKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_ENABLE1, 0xb0),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE0, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_RESTRIM_CTRL2, 0x05),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VCO_TUNE_MAP, 0x10),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_SELECT, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_HSCLK_SEL1, 0x30),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORE_CLK_EN, 0x73),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SVS_MODE_CLK_SEL, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV1, 0x22),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV2, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BGV_TRIM, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BG_CTRL, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL0, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_TAP_EN, 0x0d),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TX_BAND_MODE, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_LANE_MODE, 0x1a),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PARALLEL_RATE, 0x2f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE0, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE1, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE2, 0x1b),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE2, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE0, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE1, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE2, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_THRESH_DFE, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CGA_THRESH_DFE, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXENGINE_EN0, 0x12),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_TRAIN_TIME, 0x25),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_DFE_OVRLP_TIME, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_REFRESH_TIME, 0x05),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_ENABLE_TIME, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_GAIN, 0x26),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_GAIN, 0x12),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_OFFSET_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PRE_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_INTVAL, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EDAC_INITVAL, 0x28),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB0, 0x7f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB1, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RCVRDONE_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_CTRL, 0x70),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE0, 0x8b),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE2, 0x0a),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE2, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_BAND, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE0, 0x5c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE1, 0x3e),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE2, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_ENABLES, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_CNTRL, 0xa0),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_DEGLITCH_CNTRL, 0x08),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DCC_GAIN, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_EN_SIGNAL, 0xc3),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PSM_RX_EN_CAL, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_MISC_CNTRL0, 0xbc),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TS0_TIMER, 0x7f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DLL_HIGHDATARATE, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RESETCODE_OFFSET, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_INITVAL, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RSM_START, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_rx_tbl[] = {
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_PCS_TX_RX_CONFIG, 0x50),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M3P5DB, 0x19),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M3P5DB, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M6DB, 0x17),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M6DB, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG5, 0x9f),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x50),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb5),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4c),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x64),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x1E),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0D),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5B),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_RX_PWM_GEAR_BAND, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_DRV_LVL, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),
> + QMP_PHY_INIT_CFG(QPHY_RX_SYM_RESYNC_CTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_POST_EMP_LVL, 0x12),
> + QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_POST_EMP_LVL, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL2, 0x6e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SYM_RESYNC_CTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL1, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_MIN_HIBERN8_TIME, 0x9a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
> +
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x94),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> +
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x5),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x6e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x39),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x39),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x35),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P6_P7_PRE, 0x33),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_EQ_CONFIG2, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x05),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG2, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x26),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x048),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x46),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_CFG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x50),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MISC1, 0x88),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTERNAL_DIG_CORECLK_DIV, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MODE, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_DC_LEVEL_CTRL, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x56),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x22),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_3, 0x13),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_VMODE_CTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_PI_QEC_CTRL, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_FO_GAIN_RATE2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_UCDR_PI_CONTROLS, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_3, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_VGA_CAL_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x27),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2, 0x5a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B0, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B1, 0xf9),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B3, 0xce),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B4, 0x62),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B0, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B1, 0x7d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B3, 0xcf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B4, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_PHPRE_CTRL, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_MARG_COARSE_CTRL2, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG2, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG4, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG5, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_EQ_CONFIG1, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G3_RXEQEVAL_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_RXEQEVAL_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG2, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0b),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x65),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xf5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf1),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x6d),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x6d),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xed),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x3c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xb7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0xb7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_INITVAL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_EQ_CONFIG2, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x46),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_CFG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0xd0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MISC1, 0x88),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_DC_LEVEL_CTRL, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xcc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xcc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x29),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0xc5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xad),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xb6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xc7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xef),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x81),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x05),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
> +};
> +
> +/* Register names should be validated, they might be different for this PHY */
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_EQ_CONFIG1, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3, 0x28),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
> +};
> +
> +struct qmp_phy;
> +
> +/* struct qmp_phy_cfg - per-PHY initialization config */
> +struct qmp_phy_cfg {
> + /* phy-type - PCIE/UFS/USB */
> + unsigned int type;
> + /* number of lanes provided by phy */
> + int nlanes;
> +
> + /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
> + const struct qmp_phy_init_tbl *serdes_tbl;
> + int serdes_tbl_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_sec;
> + int serdes_tbl_num_sec;
> + const struct qmp_phy_init_tbl *tx_tbl;
> + int tx_tbl_num;
> + const struct qmp_phy_init_tbl *tx_tbl_sec;
> + int tx_tbl_num_sec;
> + const struct qmp_phy_init_tbl *rx_tbl;
> + int rx_tbl_num;
> + const struct qmp_phy_init_tbl *rx_tbl_sec;
> + int rx_tbl_num_sec;
> + const struct qmp_phy_init_tbl *pcs_tbl;
> + int pcs_tbl_num;
> + const struct qmp_phy_init_tbl *pcs_tbl_sec;
> + int pcs_tbl_num_sec;
> + const struct qmp_phy_init_tbl *pcs_misc_tbl;
> + int pcs_misc_tbl_num;
> + const struct qmp_phy_init_tbl *pcs_misc_tbl_sec;
> + int pcs_misc_tbl_num_sec;
> +
> + /* Init sequence for DP PHY block link rates */
> + const struct qmp_phy_init_tbl *serdes_tbl_rbr;
> + int serdes_tbl_rbr_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr;
> + int serdes_tbl_hbr_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr2;
> + int serdes_tbl_hbr2_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
> + int serdes_tbl_hbr3_num;
> +
> + /* DP PHY callbacks */
> + int (*configure_dp_phy)(struct qmp_phy *qphy);
> + void (*configure_dp_tx)(struct qmp_phy *qphy);
> + int (*calibrate_dp_phy)(struct qmp_phy *qphy);
> + void (*dp_aux_init)(struct qmp_phy *qphy);
> +
> + /* clock ids to be requested */
> + const char * const *clk_list;
> + int num_clks;
> + /* resets to be requested */
> + const char * const *reset_list;
> + int num_resets;
> + /* regulators to be requested */
> + const char * const *vreg_list;
> + int num_vregs;
> +
> + /* array of registers with different offsets */
> + const unsigned int *regs;
> +
> + unsigned int start_ctrl;
> + unsigned int pwrdn_ctrl;
> + unsigned int mask_com_pcs_ready;
> + /* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
> + unsigned int phy_status;
> +
> + /* true, if PHY has a separate PHY_COM control block */
> + bool has_phy_com_ctrl;
> + /* true, if PHY has a reset for individual lanes */
> + bool has_lane_rst;
> + /* true, if PHY needs delay after POWER_DOWN */
> + bool has_pwrdn_delay;
> + /* power_down delay in usec */
> + int pwrdn_delay_min;
> + int pwrdn_delay_max;
> +
> + /* true, if PHY has a separate DP_COM control block */
> + bool has_phy_dp_com_ctrl;
> + /* true, if PHY has secondary tx/rx lanes to be configured */
> + bool is_dual_lane_phy;
> +
> + /* true, if PCS block has no separate SW_RESET register */
> + bool no_pcs_sw_reset;
> +};
> +
> +struct qmp_phy_combo_cfg {
> + const struct qmp_phy_cfg *usb_cfg;
> + const struct qmp_phy_cfg *dp_cfg;
> +};
> +
> +/**
> + * struct qmp_phy - per-lane phy descriptor
> + *
> + * @phy: generic phy
> + * @cfg: phy specific configuration
> + * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
> + * @tx: iomapped memory space for lane's tx
> + * @rx: iomapped memory space for lane's rx
> + * @pcs: iomapped memory space for lane's pcs
> + * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
> + * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> + * @pcs_misc: iomapped memory space for lane's pcs_misc
> + * @pipe_clk: pipe clock
> + * @index: lane index
> + * @qmp: QMP phy to which this lane belongs
> + * @lane_rst: lane's reset controller
> + * @mode: current PHY mode
> + * @dp_aux_cfg: Display port aux config
> + * @dp_opts: Display port optional config
> + * @dp_clks: Display port clocks
> + */
> +struct qmp_phy {
> + struct phy *phy;
> + const struct qmp_phy_cfg *cfg;
> + void __iomem *serdes;
> + void __iomem *tx;
> + void __iomem *rx;
> + void __iomem *pcs;
> + void __iomem *tx2;
> + void __iomem *rx2;
> + void __iomem *pcs_misc;
> + struct clk *pipe_clk;
> + unsigned int index;
> + struct qcom_qmp *qmp;
> + struct reset_control *lane_rst;
> + enum phy_mode mode;
> + unsigned int dp_aux_cfg;
> + struct phy_configure_opts_dp dp_opts;
> + struct qmp_phy_dp_clks *dp_clks;
> +};
> +
> +struct qmp_phy_dp_clks {
> + struct qmp_phy *qphy;
> + struct clk_hw dp_link_hw;
> + struct clk_hw dp_pixel_hw;
> +};
> +
> +/**
> + * struct qcom_qmp - structure holding QMP phy block attributes
> + *
> + * @dev: device
> + * @dp_com: iomapped memory space for phy's dp_com control block
> + *
> + * @clks: array of clocks required by phy
> + * @resets: array of resets required by phy
> + * @vregs: regulator supplies bulk data
> + *
> + * @phys: array of per-lane phy descriptors
> + * @phy_mutex: mutex lock for PHY common block initialization
> + * @init_count: phy common block initialization count
> + * @ufs_reset: optional UFS PHY reset handle
> + */
> +struct qcom_qmp {
> + struct device *dev;
> + void __iomem *dp_com;
> +
> + struct clk_bulk_data *clks;
> + struct reset_control **resets;
> + struct regulator_bulk_data *vregs;
> +
> + struct qmp_phy **phys;
> +
> + struct mutex phy_mutex;
> + int init_count;
> +
> + struct reset_control *ufs_reset;
> +};
> +
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
> +
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
> +
> +static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> +{
> + u32 reg;
> +
> + reg = readl(base + offset);
> + reg |= val;
> + writel(reg, base + offset);
> +
> + /* ensure that above write is through */
> + readl(base + offset);
> +}
> +
> +static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
> +{
> + u32 reg;
> +
> + reg = readl(base + offset);
> + reg &= ~val;
> + writel(reg, base + offset);
> +
> + /* ensure that above write is through */
> + readl(base + offset);
> +}
> +
> +/* list of clocks required by phy */
> +static const char * const msm8996_phy_clk_l[] = {
> + "aux", "cfg_ahb", "ref",
> +};
> +
> +static const char * const msm8996_ufs_phy_clk_l[] = {
> + "ref",
> +};
> +
> +static const char * const qmp_v3_phy_clk_l[] = {
> + "aux", "cfg_ahb", "ref", "com_aux",
> +};
> +
> +static const char * const sdm845_pciephy_clk_l[] = {
> + "aux", "cfg_ahb", "ref", "refgen",
> +};
> +
> +static const char * const qmp_v4_phy_clk_l[] = {
> + "aux", "ref_clk_src", "ref", "com_aux",
> +};
> +
> +/* the primary usb3 phy on sm8250 doesn't have a ref clock */
> +static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
> + "aux", "ref_clk_src", "com_aux"
> +};
> +
> +static const char * const sm8450_ufs_phy_clk_l[] = {
> + "qref", "ref", "ref_aux",
> +};
> +
> +static const char * const sdm845_ufs_phy_clk_l[] = {
> + "ref", "ref_aux",
> +};
> +
> +/* usb3 phy on sdx55 doesn't have com_aux clock */
> +static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
> + "aux", "cfg_ahb", "ref"
> +};
> +
> +static const char * const qcm2290_usb3phy_clk_l[] = {
> + "cfg_ahb", "ref", "com_aux",
> +};
> +
> +/* list of resets */
> +static const char * const msm8996_pciephy_reset_l[] = {
> + "phy", "common", "cfg",
> +};
> +
> +static const char * const msm8996_usb3phy_reset_l[] = {
> + "phy", "common",
> +};
> +
> +static const char * const sc7180_usb3phy_reset_l[] = {
> + "phy",
> +};
> +
> +static const char * const qcm2290_usb3phy_reset_l[] = {
> + "phy_phy", "phy",
> +};
> +
> +static const char * const sdm845_pciephy_reset_l[] = {
> + "phy",
> +};
> +
> +/* list of regulators */
> +static const char * const qmp_phy_vreg_l[] = {
> + "vdda-phy", "vdda-pll",
> +};
> +
> +static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq8074_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
> + .tx_tbl = msm8996_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
> + .rx_tbl = ipq8074_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq8074_usb3_rx_tbl),
> + .pcs_tbl = ipq8074_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq8074_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 3,
> +
> + .serdes_tbl = msm8996_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl),
> + .tx_tbl = msm8996_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl),
> + .rx_tbl = msm8996_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl),
> + .pcs_tbl = msm8996_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | PLL_READY_GATE_EN,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .mask_com_pcs_ready = PCS_READY,
> + .phy_status = PHYSTATUS,
> +
> + .has_phy_com_ctrl = true,
> + .has_lane_rst = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_ufs_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8996_ufs_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes_tbl),
> + .tx_tbl = msm8996_ufs_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx_tbl),
> + .rx_tbl = msm8996_ufs_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx_tbl),
> +
> + .clk_list = msm8996_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l),
> +
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> +
> + .regs = msm8996_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8996_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl),
> + .tx_tbl = msm8996_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
> + .rx_tbl = msm8996_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_usb3_rx_tbl),
> + .pcs_tbl = msm8996_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8996_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const char * const ipq8074_pciephy_clk_l[] = {
> + "aux", "cfg_ahb",
> +};
> +/* list of resets */
> +static const char * const ipq8074_pciephy_reset_l[] = {
> + "phy", "common",
> +};
> +
> +static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq8074_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
> + .tx_tbl = ipq8074_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_tx_tbl),
> + .rx_tbl = ipq8074_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
> + .pcs_tbl = ipq8074_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
> + .clk_list = ipq8074_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = NULL,
> + .num_vregs = 0,
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_phy_com_ctrl = false,
> + .has_lane_rst = false,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq6018_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
> + .tx_tbl = ipq6018_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(ipq6018_pcie_tx_tbl),
> + .rx_tbl = ipq6018_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
> + .pcs_tbl = ipq6018_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
> + .clk_list = ipq8074_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = NULL,
> + .num_vregs = 0,
> + .regs = ipq_pciephy_gen3_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> +
> + .has_phy_com_ctrl = false,
> + .has_lane_rst = false,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sdm845_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_serdes_tbl),
> + .tx_tbl = sdm845_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_tx_tbl),
> + .rx_tbl = sdm845_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_rx_tbl),
> + .pcs_tbl = sdm845_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sdm845_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_qmp_pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sdm845_qhp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_serdes_tbl),
> + .tx_tbl = sdm845_qhp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_tx_tbl),
> + .rx_tbl = sdm845_qhp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_rx_tbl),
> + .pcs_tbl = sdm845_qhp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_pcs_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_qhp_pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
> + .serdes_tbl_sec = sm8250_qmp_gen3x1_pcie_serdes_tbl,
> + .serdes_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_serdes_tbl),
> + .tx_tbl = sm8250_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
> + .rx_tbl = sm8250_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
> + .rx_tbl_sec = sm8250_qmp_gen3x1_pcie_rx_tbl,
> + .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_rx_tbl),
> + .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
> + .pcs_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_tbl,
> + .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
> + .pcs_misc_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
> + .tx_tbl = sm8250_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
> + .tx_tbl_sec = sm8250_qmp_gen3x2_pcie_tx_tbl,
> + .tx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_tx_tbl),
> + .rx_tbl = sm8250_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
> + .rx_tbl_sec = sm8250_qmp_gen3x2_pcie_rx_tbl,
> + .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_rx_tbl),
> + .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
> + .pcs_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_tbl,
> + .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
> + .pcs_misc_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> + .tx_tbl = qmp_v3_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
> + .usb_cfg = &sc7180_usb3phy_cfg,
> + .dp_cfg = &sc7180_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sdm845_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
> + .tx_tbl = sdm845_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
> + .rx_tbl = sdm845_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
> + .pcs_tbl = sdm845_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm6115_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
> + .tx_tbl = sm6115_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
> + .rx_tbl = sm6115_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
> + .pcs_tbl = sm6115_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm6115_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> +
> + .is_dual_lane_phy = false,
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8998_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl),
> + .tx_tbl = msm8998_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8998_pcie_tx_tbl),
> + .rx_tbl = msm8998_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8998_pcie_rx_tbl),
> + .pcs_tbl = msm8998_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8998_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
> + .tx_tbl = msm8998_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8998_usb3_tx_tbl),
> + .rx_tbl = msm8998_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
> + .pcs_tbl = msm8998_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8150_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
> + .tx_tbl = sm8150_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
> + .rx_tbl = sm8150_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
> + .pcs_tbl = sm8150_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8150_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_tx_tbl),
> + .rx_tbl = sm8150_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
> + .pcs_tbl = sm8150_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sc8180x_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_serdes_tbl),
> + .tx_tbl = sc8180x_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl),
> + .rx_tbl = sc8180x_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_rx_tbl),
> + .pcs_tbl = sc8180x_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sc8180x_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v4_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> + .tx_tbl = qmp_v4_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
> + .usb_cfg = &sm8150_usb3phy_cfg,
> + .dp_cfg = &sc8180x_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8150_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8150_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8250_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_tx_tbl),
> + .rx_tbl = sm8250_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
> + .pcs_tbl = sm8250_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8250_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8250_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v4_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> + .tx_tbl = qmp_v4_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
> + .usb_cfg = &sm8250_usb3phy_cfg,
> + .dp_cfg = &sm8250_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sdx55_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_tx_tbl),
> + .rx_tbl = sdx55_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_sdx55_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sdx55_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_serdes_tbl),
> + .tx_tbl = sdx55_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_tx_tbl),
> + .rx_tbl = sdx55_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_rx_tbl),
> + .pcs_tbl = sdx55_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sdx55_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS_4_20,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sdx65_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_tx_tbl),
> + .rx_tbl = sdx65_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_sdx55_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8350_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8350_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
> + .tx_tbl = sm8350_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
> + .rx_tbl = sm8350_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
> + .pcs_tbl = sm8350_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8350_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_tx_tbl),
> + .rx_tbl = sm8350_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl),
> + .pcs_tbl = sm8350_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl),
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8350_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8350_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8350_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8350_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
> + .tx_tbl = sm8350_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
> + .rx_tbl = sm8350_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
> + .pcs_tbl = sm8350_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
> + .clk_list = sm8450_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8450_qmp_gen3x1_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl),
> + .tx_tbl = sm8450_qmp_gen3x1_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl),
> + .rx_tbl = sm8450_qmp_gen3x1_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl),
> + .pcs_tbl = sm8450_qmp_gen3x1_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8450_qmp_gen4x2_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_serdes_tbl),
> + .tx_tbl = sm8450_qmp_gen4x2_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_tx_tbl),
> + .rx_tbl = sm8450_qmp_gen4x2_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_rx_tbl),
> + .pcs_tbl = sm8450_qmp_gen4x2_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8450_qmp_gen4x2_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS_4_20,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qcm2290_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
> + .tx_tbl = qcm2290_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qcm2290_usb3_tx_tbl),
> + .rx_tbl = qcm2290_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qcm2290_usb3_rx_tbl),
> + .pcs_tbl = qcm2290_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
> + .clk_list = qcm2290_usb3phy_clk_l,
> + .num_clks = ARRAY_SIZE(qcm2290_usb3phy_clk_l),
> + .reset_list = qcm2290_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qcm2290_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static void qcom_qmp_phy_configure_lane(void __iomem *base,
> + const unsigned int *regs,
> + const struct qmp_phy_init_tbl tbl[],
> + int num,
> + u8 lane_mask)
> +{
> + int i;
> + const struct qmp_phy_init_tbl *t = tbl;
> +
> + if (!t)
> + return;
> +
> + for (i = 0; i < num; i++, t++) {
> + if (!(t->lane_mask & lane_mask))
> + continue;
> +
> + if (t->in_layout)
> + writel(t->val, base + regs[t->offset]);
> + else
> + writel(t->val, base + t->offset);
> + }
> +}
> +
> +static void qcom_qmp_phy_configure(void __iomem *base,
> + const unsigned int *regs,
> + const struct qmp_phy_init_tbl tbl[],
> + int num)
> +{
> + qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff);
> +}
> +
> +static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
> + int serdes_tbl_num = cfg->serdes_tbl_num;
> + int ret;
> +
> + qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
> + if (cfg->serdes_tbl_sec)
> + qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
> + cfg->serdes_tbl_num_sec);
> +
> + if (cfg->type == PHY_TYPE_DP) {
> + switch (dp_opts->link_rate) {
> + case 1620:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_rbr,
> + cfg->serdes_tbl_rbr_num);
> + break;
> + case 2700:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr,
> + cfg->serdes_tbl_hbr_num);
> + break;
> + case 5400:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr2,
> + cfg->serdes_tbl_hbr2_num);
> + break;
> + case 8100:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr3,
> + cfg->serdes_tbl_hbr3_num);
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + }
> +
> +
> + if (cfg->has_phy_com_ctrl) {
> + void __iomem *status;
> + unsigned int mask, val;
> +
> + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
> + SERDES_START | PCS_START);
> +
> + status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
> + mask = cfg->mask_com_pcs_ready;
> +
> + ret = readl_poll_timeout(status, val, (val & mask), 10,
> + PHY_INIT_COMPLETE_TIMEOUT);
> + if (ret) {
> + dev_err(qmp->dev,
> + "phy common block init timed-out\n");
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + /* Turn on BIAS current for PHY/PLL */
> + writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
> + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
> + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_LANE_0_1_PWRDN |
> + DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
> + DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(QSERDES_V3_COM_BIAS_EN |
> + QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
> + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
> + QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
> + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0x24, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
> + writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
> + writel(0xbb, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
> + qphy->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
> + { 0x00, 0x0c, 0x15, 0x1a },
> + { 0x02, 0x0e, 0x16, 0xff },
> + { 0x02, 0x11, 0xff, 0xff },
> + { 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
> + { 0x02, 0x12, 0x16, 0x1a },
> + { 0x09, 0x19, 0x1f, 0xff },
> + { 0x10, 0x1f, 0xff, 0xff },
> + { 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> + { 0x00, 0x0c, 0x14, 0x19 },
> + { 0x00, 0x0b, 0x12, 0xff },
> + { 0x00, 0x0b, 0xff, 0xff },
> + { 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
> + { 0x08, 0x0f, 0x16, 0x1f },
> + { 0x11, 0x1e, 0x1f, 0xff },
> + { 0x19, 0x1f, 0xff, 0xff },
> + { 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
> + unsigned int drv_lvl_reg, unsigned int emp_post_reg)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + unsigned int v_level = 0, p_level = 0;
> + u8 voltage_swing_cfg, pre_emphasis_cfg;
> + int i;
> +
> + for (i = 0; i < dp_opts->lanes; i++) {
> + v_level = max(v_level, dp_opts->voltage[i]);
> + p_level = max(p_level, dp_opts->pre[i]);
> + }
> +
> + if (dp_opts->link_rate <= 2700) {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> + } else {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
> + }
> +
> + /* TODO: Move check to config check */
> + if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> + return -EINVAL;
> +
> + /* Enable MUX to use Cursor values from these registers */
> + voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> + pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> +
> + writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
> + writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
> + writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
> + writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 bias_en, drvr_en;
> +
> + if (qcom_qmp_phy_configure_dp_swing(qphy,
> + QSERDES_V3_TX_TX_DRV_LVL,
> + QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
> + return;
> +
> + if (dp_opts->lanes == 1) {
> + bias_en = 0x3e;
> + drvr_en = 0x13;
> + } else {
> + bias_en = 0x3f;
> + drvr_en = 0x10;
> + }
> +
> + writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> + writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> +}
> +
> +static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy)
> +{
> + u32 val;
> + bool reverse = false;
> +
> + val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
> +
> + /*
> + * TODO: Assume orientation is CC1 for now and two lanes, need to
> + * use type-c connector to understand orientation and lanes.
> + *
> + * Otherwise val changes to be like below if this code understood
> + * the orientation of the type-c cable.
> + *
> + * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
> + * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
> + * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
> + * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> + * if (orientation == ORIENTATION_CC2)
> + * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> + */
> + val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> + writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
> +
> + return reverse;
> +}
> +
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 phy_vco_div, status;
> + unsigned long pixel_freq;
> +
> + qcom_qmp_phy_configure_dp_mode(qphy);
> +
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> + writel(0x04, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
> + udelay(2000);
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000);
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> + static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
> + u8 val;
> +
> + qphy->dp_aux_cfg++;
> + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[qphy->dp_aux_cfg];
> +
> + writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + /* Turn on BIAS current for PHY/PLL */
> + writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
> + writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
> + writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
> + qphy->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + /* Program default values before writing proper values */
> + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +
> + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +
> + qcom_qmp_phy_configure_dp_swing(qphy,
> + QSERDES_V4_TX_TX_DRV_LVL,
> + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +}
> +
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 phy_vco_div, status;
> + unsigned long pixel_freq;
> + u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
> + bool reverse;
> +
> + writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
> +
> + reverse = qcom_qmp_phy_configure_dp_mode(qphy);
> +
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> +
> + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + /*
> + * At least for 7nm DP PHY this has to be done after enabling link
> + * clock.
> + */
> +
> + if (dp_opts->lanes == 1) {
> + bias0_en = reverse ? 0x3e : 0x15;
> + bias1_en = reverse ? 0x15 : 0x3e;
> + drvr0_en = reverse ? 0x13 : 0x10;
> + drvr1_en = reverse ? 0x10 : 0x13;
> + } else if (dp_opts->lanes == 2) {
> + bias0_en = reverse ? 0x3f : 0x15;
> + bias1_en = reverse ? 0x15 : 0x3f;
> + drvr0_en = 0x10;
> + drvr1_en = 0x10;
> + } else {
> + bias0_en = 0x3f;
> + bias1_en = 0x3f;
> + drvr0_en = 0x10;
> + drvr1_en = 0x10;
> + }
> +
> + writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
> + writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
> + writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
> + writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
> +
> + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
> + udelay(2000);
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
> + writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
> +
> + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +
> + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +
> + return 0;
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> + static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
> + u8 val;
> +
> + qphy->dp_aux_cfg++;
> + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[qphy->dp_aux_cfg];
> +
> + writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &opts->dp;
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
> + if (qphy->dp_opts.set_voltages) {
> + cfg->configure_dp_tx(qphy);
> + qphy->dp_opts.set_voltages = 0;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + if (cfg->calibrate_dp_phy)
> + return cfg->calibrate_dp_phy(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *dp_com = qmp->dp_com;
> + int ret, i;
> +
> + mutex_lock(&qmp->phy_mutex);
> + if (qmp->init_count++) {
> + mutex_unlock(&qmp->phy_mutex);
> + return 0;
> + }
> +
> + /* turn on regulator supplies */
> + ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
> + if (ret) {
> + dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
> + goto err_unlock;
> + }
> +
> + for (i = 0; i < cfg->num_resets; i++) {
> + ret = reset_control_assert(qmp->resets[i]);
> + if (ret) {
> + dev_err(qmp->dev, "%s reset assert failed\n",
> + cfg->reset_list[i]);
> + goto err_disable_regulators;
> + }
> + }
> +
> + for (i = cfg->num_resets - 1; i >= 0; i--) {
> + ret = reset_control_deassert(qmp->resets[i]);
> + if (ret) {
> + dev_err(qmp->dev, "%s reset deassert failed\n",
> + qphy->cfg->reset_list[i]);
> + goto err_assert_reset;
> + }
> + }
> +
> + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
> + if (ret)
> + goto err_assert_reset;
> +
> + if (cfg->has_phy_dp_com_ctrl) {
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
> + SW_PWRDN);
> + /* override hardware control for reset of qmp phy */
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +
> + /* Default type-c orientation, i.e CC1 */
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
> +
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
> + USB3_MODE | DP_MODE);
> +
> + /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
> + }
> +
> + if (cfg->has_phy_com_ctrl) {
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
> + SW_PWRDN);
> + } else {
> + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
> + qphy_setbits(pcs,
> + cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> + cfg->pwrdn_ctrl);
> + else
> + qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL,
> + cfg->pwrdn_ctrl);
> + }
> +
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +
> +err_assert_reset:
> + while (++i < cfg->num_resets)
> + reset_control_assert(qmp->resets[i]);
> +err_disable_regulators:
> + regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> +err_unlock:
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + int i = cfg->num_resets;
> +
> + mutex_lock(&qmp->phy_mutex);
> + if (--qmp->init_count) {
> + mutex_unlock(&qmp->phy_mutex);
> + return 0;
> + }
> +
> + reset_control_assert(qmp->ufs_reset);
> + if (cfg->has_phy_com_ctrl) {
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
> + SERDES_START | PCS_START);
> + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET],
> + SW_RESET);
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
> + SW_PWRDN);
> + }
> +
> + while (--i >= 0)
> + reset_control_assert(qmp->resets[i]);
> +
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> +
> + regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> +
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_init(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + int ret;
> + dev_vdbg(qmp->dev, "Initializing QMP phy\n");
> +
> + if (cfg->no_pcs_sw_reset) {
> + /*
> + * Get UFS reset, which is delayed until now to avoid a
> + * circular dependency where UFS needs its PHY, but the PHY
> + * needs this UFS reset.
> + */
> + if (!qmp->ufs_reset) {
> + qmp->ufs_reset =
> + devm_reset_control_get_exclusive(qmp->dev,
> + "ufsphy");
> +
> + if (IS_ERR(qmp->ufs_reset)) {
> + ret = PTR_ERR(qmp->ufs_reset);
> + dev_err(qmp->dev,
> + "failed to get UFS reset: %d\n",
> + ret);
> +
> + qmp->ufs_reset = NULL;
> + return ret;
> + }
> + }
> +
> + ret = reset_control_assert(qmp->ufs_reset);
> + if (ret)
> + return ret;
> + }
> +
> + ret = qcom_qmp_phy_com_init(qphy);
> + if (ret)
> + return ret;
> +
> + if (cfg->type == PHY_TYPE_DP)
> + cfg->dp_aux_init(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_power_on(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *tx = qphy->tx;
> + void __iomem *rx = qphy->rx;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> + void __iomem *status;
> + unsigned int mask, val, ready;
> + int ret;
> +
> + qcom_qmp_phy_serdes_init(qphy);
> +
> + if (cfg->has_lane_rst) {
> + ret = reset_control_deassert(qphy->lane_rst);
> + if (ret) {
> + dev_err(qmp->dev, "lane%d reset deassert failed\n",
> + qphy->index);
> + return ret;
> + }
> + }
> +
> + ret = clk_prepare_enable(qphy->pipe_clk);
> + if (ret) {
> + dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
> + goto err_reset_lane;
> + }
> +
> + /* Tx, Rx, and PCS configurations */
> + qcom_qmp_phy_configure_lane(tx, cfg->regs,
> + cfg->tx_tbl, cfg->tx_tbl_num, 1);
> + if (cfg->tx_tbl_sec)
> + qcom_qmp_phy_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
> + cfg->tx_tbl_num_sec, 1);
> +
> + /* Configuration for other LANE for USB-DP combo PHY */
> + if (cfg->is_dual_lane_phy) {
> + qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
> + cfg->tx_tbl, cfg->tx_tbl_num, 2);
> + if (cfg->tx_tbl_sec)
> + qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
> + cfg->tx_tbl_sec,
> + cfg->tx_tbl_num_sec, 2);
> + }
> +
> + /* Configure special DP tx tunings */
> + if (cfg->type == PHY_TYPE_DP)
> + cfg->configure_dp_tx(qphy);
> +
> + qcom_qmp_phy_configure_lane(rx, cfg->regs,
> + cfg->rx_tbl, cfg->rx_tbl_num, 1);
> + if (cfg->rx_tbl_sec)
> + qcom_qmp_phy_configure_lane(rx, cfg->regs,
> + cfg->rx_tbl_sec, cfg->rx_tbl_num_sec, 1);
> +
> + if (cfg->is_dual_lane_phy) {
> + qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
> + cfg->rx_tbl, cfg->rx_tbl_num, 2);
> + if (cfg->rx_tbl_sec)
> + qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
> + cfg->rx_tbl_sec,
> + cfg->rx_tbl_num_sec, 2);
> + }
> +
> + /* Configure link rate, swing, etc. */
> + if (cfg->type == PHY_TYPE_DP) {
> + cfg->configure_dp_phy(qphy);
> + } else {
> + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
> + if (cfg->pcs_tbl_sec)
> + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
> + cfg->pcs_tbl_num_sec);
> + }
> +
> + ret = reset_control_deassert(qmp->ufs_reset);
> + if (ret)
> + goto err_disable_pipe_clk;
> +
> + qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
> + cfg->pcs_misc_tbl_num);
> + if (cfg->pcs_misc_tbl_sec)
> + qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
> + cfg->pcs_misc_tbl_num_sec);
> +
> + /*
> + * Pull out PHY from POWER DOWN state.
> + * This is active low enable signal to power-down PHY.
> + */
> + if(cfg->type == PHY_TYPE_PCIE)
> + qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
> +
> + if (cfg->has_pwrdn_delay)
> + usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
> +
> + if (cfg->type != PHY_TYPE_DP) {
> + /* Pull PHY out of reset state */
> + if (!cfg->no_pcs_sw_reset)
> + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> + /* start SerDes and Phy-Coding-Sublayer */
> + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> +
> + if (cfg->type == PHY_TYPE_UFS) {
> + status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
> + mask = PCS_READY;
> + ready = PCS_READY;
> + } else {
> + status = pcs + cfg->regs[QPHY_PCS_STATUS];
> + mask = cfg->phy_status;
> + ready = 0;
> + }
> +
> + ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
> + PHY_INIT_COMPLETE_TIMEOUT);
> + if (ret) {
> + dev_err(qmp->dev, "phy initialization timed-out\n");
> + goto err_disable_pipe_clk;
> + }
> + }
> + return 0;
> +
> +err_disable_pipe_clk:
> + clk_disable_unprepare(qphy->pipe_clk);
> +err_reset_lane:
> + if (cfg->has_lane_rst)
> + reset_control_assert(qphy->lane_rst);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_power_off(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + clk_disable_unprepare(qphy->pipe_clk);
> +
> + if (cfg->type == PHY_TYPE_DP) {
> + /* Assert DP PHY power down */
> + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> + } else {
> + /* PHY reset */
> + if (!cfg->no_pcs_sw_reset)
> + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> +
> + /* stop SerDes and Phy-Coding-Sublayer */
> + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> +
> + /* Put PHY into POWER DOWN state: active low */
> + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
> + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> + cfg->pwrdn_ctrl);
> + } else {
> + qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL,
> + cfg->pwrdn_ctrl);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_exit(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + if (cfg->has_lane_rst)
> + reset_control_assert(qphy->lane_rst);
> +
> + qcom_qmp_phy_com_exit(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_enable(struct phy *phy)
> +{
> + int ret;
> +
> + ret = qcom_qmp_phy_init(phy);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_power_on(phy);
> + if (ret)
> + qcom_qmp_phy_exit(phy);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_disable(struct phy *phy)
> +{
> + int ret;
> +
> + ret = qcom_qmp_phy_power_off(phy);
> + if (ret)
> + return ret;
> + return qcom_qmp_phy_exit(phy);
> +}
> +
> +static int qcom_qmp_phy_set_mode(struct phy *phy,
> + enum phy_mode mode, int submode)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> +
> + qphy->mode = mode;
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> + u32 intr_mask;
> +
> + if (qphy->mode == PHY_MODE_USB_HOST_SS ||
> + qphy->mode == PHY_MODE_USB_DEVICE_SS)
> + intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
> + else
> + intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
> +
> + /* Clear any pending interrupts status */
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> + /* Writing 1 followed by 0 clears the interrupt */
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> +
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
> + ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
> +
> + /* Enable required PHY autonomous mode interrupts */
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
> +
> + /* Enable i/o clamp_n for autonomous mode */
> + if (pcs_misc)
> + qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
> +}
> +
> +static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> +
> + /* Disable i/o clamp_n on resume for normal mode */
> + if (pcs_misc)
> + qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
> +
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
> + ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
> +
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> + /* Writing 1 followed by 0 clears the interrupt */
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> +}
> +
> +static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct qmp_phy *qphy = qmp->phys[0];
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
> +
> + /* Supported only for USB3 PHY and luckily USB3 is the first phy */
> + if (cfg->type != PHY_TYPE_USB3)
> + return 0;
> +
> + if (!qmp->init_count) {
> + dev_vdbg(dev, "PHY not initialized, bailing out\n");
> + return 0;
> + }
> +
> + qcom_qmp_phy_enable_autonomous_mode(qphy);
> +
> + clk_disable_unprepare(qphy->pipe_clk);
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct qmp_phy *qphy = qmp->phys[0];
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + int ret = 0;
> +
> + dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
> +
> + /* Supported only for USB3 PHY and luckily USB3 is the first phy */
> + if (cfg->type != PHY_TYPE_USB3)
> + return 0;
> +
> + if (!qmp->init_count) {
> + dev_vdbg(dev, "PHY not initialized, bailing out\n");
> + return 0;
> + }
> +
> + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(qphy->pipe_clk);
> + if (ret) {
> + dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> + return ret;
> + }
> +
> + qcom_qmp_phy_disable_autonomous_mode(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int num = cfg->num_vregs;
> + int i;
> +
> + qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
> + if (!qmp->vregs)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++)
> + qmp->vregs[i].supply = cfg->vreg_list[i];
> +
> + return devm_regulator_bulk_get(dev, num, qmp->vregs);
> +}
> +
> +static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int i;
> +
> + qmp->resets = devm_kcalloc(dev, cfg->num_resets,
> + sizeof(*qmp->resets), GFP_KERNEL);
> + if (!qmp->resets)
> + return -ENOMEM;
> +
> + for (i = 0; i < cfg->num_resets; i++) {
> + struct reset_control *rst;
> + const char *name = cfg->reset_list[i];
> +
> + rst = devm_reset_control_get_exclusive(dev, name);
> + if (IS_ERR(rst)) {
> + dev_err(dev, "failed to get %s reset\n", name);
> + return PTR_ERR(rst);
> + }
> + qmp->resets[i] = rst;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int num = cfg->num_clks;
> + int i;
> +
> + qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
> + if (!qmp->clks)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++)
> + qmp->clks[i].id = cfg->clk_list[i];
> +
> + return devm_clk_bulk_get(dev, num, qmp->clks);
> +}
> +
> +static void phy_clk_release_provider(void *res)
> +{
> + of_clk_del_provider(res);
> +}
> +
> +/*
> + * Register a fixed rate pipe clock.
> + *
> + * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
> + * controls it. The <s>_pipe_clk coming out of the GCC is requested
> + * by the PHY driver for its operations.
> + * We register the <s>_pipe_clksrc here. The gcc driver takes care
> + * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
> + * Below picture shows this relationship.
> + *
> + * +---------------+
> + * | PHY block |<<---------------------------------------+
> + * | | |
> + * | +-------+ | +-----+ |
> + * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
> + * clk | +-------+ | +-----+
> + * +---------------+
> + */
> +static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
> +{
> + struct clk_fixed_rate *fixed;
> + struct clk_init_data init = { };
> + int ret;
> +
> + ret = of_property_read_string(np, "clock-output-names", &init.name);
> + if (ret) {
> + dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
> + return ret;
> + }
> +
> + fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
> + if (!fixed)
> + return -ENOMEM;
> +
> + init.ops = &clk_fixed_rate_ops;
> +
> + /* controllers using QMP phys use 125MHz pipe clock interface */
> + fixed->fixed_rate = 125000000;
> + fixed->hw.init = &init;
> +
> + ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
> + if (ret)
> + return ret;
> +
> + ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
> + if (ret)
> + return ret;
> +
> + /*
> + * Roll a devm action because the clock provider is the child node, but
> + * the child node is not actually a device.
> + */
> + return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
> +}
> +
> +/*
> + * Display Port PLL driver block diagram for branch clocks
> + *
> + * +------------------------------+
> + * | DP_VCO_CLK |
> + * | |
> + * | +-------------------+ |
> + * | | (DP PLL/VCO) | |
> + * | +---------+---------+ |
> + * | v |
> + * | +----------+-----------+ |
> + * | | hsclk_divsel_clk_src | |
> + * | +----------+-----------+ |
> + * +------------------------------+
> + * |
> + * +---------<---------v------------>----------+
> + * | |
> + * +--------v----------------+ |
> + * | dp_phy_pll_link_clk | |
> + * | link_clk | |
> + * +--------+----------------+ |
> + * | |
> + * | |
> + * v v
> + * Input to DISPCC block |
> + * for link clk, crypto clk |
> + * and interface clock |
> + * |
> + * |
> + * +--------<------------+-----------------+---<---+
> + * | | |
> + * +----v---------+ +--------v-----+ +--------v------+
> + * | vco_divided | | vco_divided | | vco_divided |
> + * | _clk_src | | _clk_src | | _clk_src |
> + * | | | | | |
> + * |divsel_six | | divsel_two | | divsel_four |
> + * +-------+------+ +-----+--------+ +--------+------+
> + * | | |
> + * v---->----------v-------------<------v
> + * |
> + * +----------+-----------------+
> + * | dp_phy_pll_vco_div_clk |
> + * +---------+------------------+
> + * |
> + * v
> + * Input to DISPCC block
> + * for DP pixel clock
> + *
> + */
> +static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + switch (req->rate) {
> + case 1620000000UL / 2:
> + case 2700000000UL / 2:
> + /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned long
> +qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + const struct qmp_phy_dp_clks *dp_clks;
> + const struct qmp_phy *qphy;
> + const struct phy_configure_opts_dp *dp_opts;
> +
> + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
> + qphy = dp_clks->qphy;
> + dp_opts = &qphy->dp_opts;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + return 1620000000UL / 2;
> + case 2700:
> + return 2700000000UL / 2;
> + case 5400:
> + return 5400000000UL / 4;
> + case 8100:
> + return 8100000000UL / 6;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = {
> + .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate,
> + .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate,
> +};
> +
> +static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + switch (req->rate) {
> + case 162000000:
> + case 270000000:
> + case 540000000:
> + case 810000000:
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned long
> +qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + const struct qmp_phy_dp_clks *dp_clks;
> + const struct qmp_phy *qphy;
> + const struct phy_configure_opts_dp *dp_opts;
> +
> + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
> + qphy = dp_clks->qphy;
> + dp_opts = &qphy->dp_opts;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + case 2700:
> + case 5400:
> + case 8100:
> + return dp_opts->link_rate * 100000;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct clk_ops qcom_qmp_dp_link_clk_ops = {
> + .determine_rate = qcom_qmp_dp_link_clk_determine_rate,
> + .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate,
> +};
> +
> +static struct clk_hw *
> +qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
> +{
> + struct qmp_phy_dp_clks *dp_clks = data;
> + unsigned int idx = clkspec->args[0];
> +
> + if (idx >= 2) {
> + pr_err("%s: invalid index %u\n", __func__, idx);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + if (idx == 0)
> + return &dp_clks->dp_link_hw;
> +
> + return &dp_clks->dp_pixel_hw;
> +}
> +
> +static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
> + struct device_node *np)
> +{
> + struct clk_init_data init = { };
> + struct qmp_phy_dp_clks *dp_clks;
> + char name[64];
> + int ret;
> +
> + dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
> + if (!dp_clks)
> + return -ENOMEM;
> +
> + dp_clks->qphy = qphy;
> + qphy->dp_clks = dp_clks;
> +
> + snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
> + init.ops = &qcom_qmp_dp_link_clk_ops;
> + init.name = name;
> + dp_clks->dp_link_hw.init = &init;
> + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
> + if (ret)
> + return ret;
> +
> + snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev));
> + init.ops = &qcom_qmp_dp_pixel_clk_ops;
> + init.name = name;
> + dp_clks->dp_pixel_hw.init = &init;
> + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
> + if (ret)
> + return ret;
> +
> + ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks);
> + if (ret)
> + return ret;
> +
> + /*
> + * Roll a devm action because the clock provider is the child node, but
> + * the child node is not actually a device.
> + */
> + return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
> +}
> +
> +static const struct phy_ops qcom_qmp_phy_gen_ops = {
> + .init = qcom_qmp_phy_enable,
> + .exit = qcom_qmp_phy_disable,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct phy_ops qcom_qmp_phy_dp_ops = {
> + .init = qcom_qmp_phy_init,
> + .configure = qcom_qmp_dp_phy_configure,
> + .power_on = qcom_qmp_phy_power_on,
> + .calibrate = qcom_qmp_dp_phy_calibrate,
> + .power_off = qcom_qmp_phy_power_off,
> + .exit = qcom_qmp_phy_exit,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
> + .power_on = qcom_qmp_phy_enable,
> + .power_off = qcom_qmp_phy_disable,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static void qcom_qmp_reset_control_put(void *data)
> +{
> + reset_control_put(data);
> +}
> +
> +static
> +int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
> + void __iomem *serdes, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct phy *generic_phy;
> + struct qmp_phy *qphy;
> + const struct phy_ops *ops;
> + char prop_name[MAX_PROP_NAME];
> + int ret;
> +
> + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
> + if (!qphy)
> + return -ENOMEM;
> +
> + qphy->cfg = cfg;
> + qphy->serdes = serdes;
> + /*
> + * Get memory resources for each phy lane:
> + * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
> + * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
> + * For single lane PHYs: pcs_misc (optional) -> 3.
> + */
> + qphy->tx = of_iomap(np, 0);
> + if (!qphy->tx)
> + return -ENOMEM;
> +
> + qphy->rx = of_iomap(np, 1);
> + if (!qphy->rx)
> + return -ENOMEM;
> +
> + qphy->pcs = of_iomap(np, 2);
> + if (!qphy->pcs)
> + return -ENOMEM;
> +
> + /*
> + * If this is a dual-lane PHY, then there should be registers for the
> + * second lane. Some old device trees did not specify this, so fall
> + * back to old legacy behavior of assuming they can be reached at an
> + * offset from the first lane.
> + */
> + if (cfg->is_dual_lane_phy) {
> + qphy->tx2 = of_iomap(np, 3);
> + qphy->rx2 = of_iomap(np, 4);
> + if (!qphy->tx2 || !qphy->rx2) {
> + dev_warn(dev,
> + "Underspecified device tree, falling back to legacy register regions\n");
> +
> + /* In the old version, pcs_misc is at index 3. */
> + qphy->pcs_misc = qphy->tx2;
> + qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
> + qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
> +
> + } else {
> + qphy->pcs_misc = of_iomap(np, 5);
> + }
> +
> + } else {
> + qphy->pcs_misc = of_iomap(np, 3);
> + }
> +
> + if (!qphy->pcs_misc)
> + dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
> +
> + /*
> + * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
> + * based phys, so they essentially have pipe clock. So,
> + * we return error in case phy is USB3 or PIPE type.
> + * Otherwise, we initialize pipe clock to NULL for
> + * all phys that don't need this.
> + */
> + snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
> + qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
> + if (IS_ERR(qphy->pipe_clk)) {
> + if (cfg->type == PHY_TYPE_PCIE ||
> + cfg->type == PHY_TYPE_USB3) {
> + ret = PTR_ERR(qphy->pipe_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev,
> + "failed to get lane%d pipe_clk, %d\n",
> + id, ret);
> + return ret;
> + }
> + qphy->pipe_clk = NULL;
> + }
> +
> + /* Get lane reset, if any */
> + if (cfg->has_lane_rst) {
> + snprintf(prop_name, sizeof(prop_name), "lane%d", id);
> + qphy->lane_rst = of_reset_control_get_exclusive(np, prop_name);
> + if (IS_ERR(qphy->lane_rst)) {
> + dev_err(dev, "failed to get lane%d reset\n", id);
> + return PTR_ERR(qphy->lane_rst);
> + }
> + ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put,
> + qphy->lane_rst);
> + if (ret)
> + return ret;
> + }
> +
> + if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE)
> + ops = &qcom_qmp_pcie_ufs_ops;
> + else if (cfg->type == PHY_TYPE_DP)
> + ops = &qcom_qmp_phy_dp_ops;
> + else
> + ops = &qcom_qmp_phy_gen_ops;
> +
> + generic_phy = devm_phy_create(dev, np, ops);
> + if (IS_ERR(generic_phy)) {
> + ret = PTR_ERR(generic_phy);
> + dev_err(dev, "failed to create qphy %d\n", ret);
> + return ret;
> + }
> +
> + qphy->phy = generic_phy;
> + qphy->index = id;
> + qphy->qmp = qmp;
> + qmp->phys[id] = qphy;
> + phy_set_drvdata(generic_phy, qphy);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
> + {
> + .compatible = "qcom,ipq8074-qmp-usb3-phy",
> + .data = &ipq8074_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-pcie-phy",
> + .data = &msm8996_pciephy_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-ufs-phy",
> + .data = &msm8996_ufs_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-usb3-phy",
> + .data = &msm8996_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-pcie-phy",
> + .data = &msm8998_pciephy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,ipq8074-qmp-pcie-phy",
> + .data = &ipq8074_pciephy_cfg,
> + }, {
> + .compatible = "qcom,ipq6018-qmp-pcie-phy",
> + .data = &ipq6018_pciephy_cfg,
> + }, {
> + .compatible = "qcom,ipq6018-qmp-usb3-phy",
> + .data = &ipq8074_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc7180-qmp-usb3-phy",
> + .data = &sc7180_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sc8180x-qmp-pcie-phy",
> + .data = &sc8180x_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sc8280xp-qmp-ufs-phy",
> + .data = &sm8350_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-usb3-phy",
> + .data = &sm8150_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sdm845-qhp-pcie-phy",
> + .data = &sdm845_qhp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-pcie-phy",
> + .data = &sdm845_qmp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-usb3-phy",
> + .data = &qmp_v3_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-usb3-uni-phy",
> + .data = &qmp_v3_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-usb3-phy",
> + .data = &msm8998_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm6115-qmp-ufs-phy",
> + .data = &sm6115_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm6350-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-usb3-phy",
> + .data = &sm8150_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-usb3-uni-phy",
> + .data = &sm8150_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-phy",
> + .data = &sm8250_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-uni-phy",
> + .data = &sm8250_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy",
> + .data = &sm8250_qmp_gen3x1_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy",
> + .data = &sm8250_qmp_gen3x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-ufs-phy",
> + .data = &sm8350_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-modem-pcie-phy",
> + .data = &sm8250_qmp_gen3x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdx55-qmp-pcie-phy",
> + .data = &sdx55_qmp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdx55-qmp-usb3-uni-phy",
> + .data = &sdx55_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sdx65-qmp-usb3-uni-phy",
> + .data = &sdx65_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-usb3-phy",
> + .data = &sm8350_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-usb3-uni-phy",
> + .data = &sm8350_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
> + .data = &sm8450_qmp_gen3x1_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
> + .data = &sm8450_qmp_gen4x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-ufs-phy",
> + .data = &sm8450_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-usb3-phy",
> + .data = &sm8350_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,qcm2290-qmp-usb3-phy",
> + .data = &qcm2290_usb3phy_cfg,
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
> +
> +static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
> + {
> + .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
> + .data = &sc7180_usb3dpphy_cfg,
> + },
> + {
> + .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> + .data = &sm8250_usb3dpphy_cfg,
> + },
> + {
> + .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
> + .data = &sc8180x_usb3dpphy_cfg,
> + },
> + { }
> +};
> +
> +static const struct dev_pm_ops qcom_qmp_phy_pm_ops = {
> + SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend,
> + qcom_qmp_phy_runtime_resume, NULL)
> +};
> +
> +static int qcom_qmp_phy_probe(struct platform_device *pdev)
> +{
> + struct qcom_qmp *qmp;
> + struct device *dev = &pdev->dev;
> + struct device_node *child;
> + struct phy_provider *phy_provider;
> + void __iomem *serdes;
> + void __iomem *usb_serdes;
> + void __iomem *dp_serdes = NULL;
> + const struct qmp_phy_combo_cfg *combo_cfg = NULL;
> + const struct qmp_phy_cfg *cfg = NULL;
> + const struct qmp_phy_cfg *usb_cfg = NULL;
> + const struct qmp_phy_cfg *dp_cfg = NULL;
> + int num, id, expected_phys;
> + int ret;
> +
> + qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
> + if (!qmp)
> + return -ENOMEM;
> +
> + qmp->dev = dev;
> + dev_set_drvdata(dev, qmp);
> +
> + /* Get the specific init parameters of QMP phy */
> + cfg = of_device_get_match_data(dev);
> + if (!cfg) {
> + const struct of_device_id *match;
> +
> + match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev);
> + if (!match)
> + return -EINVAL;
> +
> + combo_cfg = match->data;
> + if (!combo_cfg)
> + return -EINVAL;
> +
> + usb_cfg = combo_cfg->usb_cfg;
> + cfg = usb_cfg; /* Setup clks and regulators */
> + }
> +
> + /* per PHY serdes; usually located at base address */
> + usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(serdes))
> + return PTR_ERR(serdes);
> +
> + /* per PHY dp_com; if PHY has dp_com control block */
> + if (combo_cfg || cfg->has_phy_dp_com_ctrl) {
> + qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
> + if (IS_ERR(qmp->dp_com))
> + return PTR_ERR(qmp->dp_com);
> + }
> +
> + if (combo_cfg) {
> + /* Only two serdes for combo PHY */
> + dp_serdes = devm_platform_ioremap_resource(pdev, 2);
> + if (IS_ERR(dp_serdes))
> + return PTR_ERR(dp_serdes);
> +
> + dp_cfg = combo_cfg->dp_cfg;
> + expected_phys = 2;
> + } else {
> + expected_phys = cfg->nlanes;
> + }
> +
> + mutex_init(&qmp->phy_mutex);
> +
> + ret = qcom_qmp_phy_clk_init(dev, cfg);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_reset_init(dev, cfg);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_vreg_init(dev, cfg);
> + if (ret) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "failed to get regulator supplies: %d\n",
> + ret);
> + return ret;
> + }
> +
> + num = of_get_available_child_count(dev->of_node);
> + /* do we have a rogue child node ? */
> + if (num > expected_phys)
> + return -EINVAL;
> +
> + qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
> + if (!qmp->phys)
> + return -ENOMEM;
> +
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> + /*
> + * Prevent runtime pm from being ON by default. Users can enable
> + * it using power/control in sysfs.
> + */
> + pm_runtime_forbid(dev);
> +
> + id = 0;
> + for_each_available_child_of_node(dev->of_node, child) {
> + if (of_node_name_eq(child, "dp-phy")) {
> + cfg = dp_cfg;
> + serdes = dp_serdes;
> + } else if (of_node_name_eq(child, "usb3-phy")) {
> + cfg = usb_cfg;
> + serdes = usb_serdes;
> + }
> +
> + /* Create per-lane phy */
> + ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg);
> + if (ret) {
> + dev_err(dev, "failed to create lane%d phy, %d\n",
> + id, ret);
> + goto err_node_put;
> + }
> +
> + /*
> + * Register the pipe clock provided by phy.
> + * See function description to see details of this pipe clock.
> + */
> + if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) {
> + ret = phy_pipe_clk_register(qmp, child);
> + if (ret) {
> + dev_err(qmp->dev,
> + "failed to register pipe clock source\n");
> + goto err_node_put;
> + }
> + } else if (cfg->type == PHY_TYPE_DP) {
> + ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
> + if (ret) {
> + dev_err(qmp->dev,
> + "failed to register DP clock source\n");
> + goto err_node_put;
> + }
> + }
> + id++;
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (!IS_ERR(phy_provider))
> + dev_info(dev, "Registered Qcom-QMP phy\n");
> + else
> + pm_runtime_disable(dev);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +
> +err_node_put:
> + pm_runtime_disable(dev);
> + of_node_put(child);
> + return ret;
> +}
> +
> +static struct platform_driver qcom_qmp_phy_driver = {
> + .probe = qcom_qmp_phy_probe,
> + .driver = {
> + .name = "qcom-qmp-phy",
> + .pm = &qcom_qmp_phy_pm_ops,
> + .of_match_table = qcom_qmp_phy_of_match_table,
> + },
> +};
> +
> +module_platform_driver(qcom_qmp_phy_driver);
> +
> +MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
> +MODULE_DESCRIPTION("Qualcomm QMP PHY driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> new file mode 100644
> index 000000000000..c7309e981bfb
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> @@ -0,0 +1,6350 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +
> +#include <dt-bindings/phy/phy.h>
> +
> +#include "phy-qcom-qmp.h"
> +
> +/* QPHY_SW_RESET bit */
> +#define SW_RESET BIT(0)
> +/* QPHY_POWER_DOWN_CONTROL */
> +#define SW_PWRDN BIT(0)
> +#define REFCLK_DRV_DSBL BIT(1)
> +/* QPHY_START_CONTROL bits */
> +#define SERDES_START BIT(0)
> +#define PCS_START BIT(1)
> +#define PLL_READY_GATE_EN BIT(3)
> +/* QPHY_PCS_STATUS bit */
> +#define PHYSTATUS BIT(6)
> +#define PHYSTATUS_4_20 BIT(7)
> +/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
> +#define PCS_READY BIT(0)
> +
> +/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
> +/* DP PHY soft reset */
> +#define SW_DPPHY_RESET BIT(0)
> +/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
> +#define SW_DPPHY_RESET_MUX BIT(1)
> +/* USB3 PHY soft reset */
> +#define SW_USB3PHY_RESET BIT(2)
> +/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
> +#define SW_USB3PHY_RESET_MUX BIT(3)
> +
> +/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
> +#define USB3_MODE BIT(0) /* enables USB3 mode */
> +#define DP_MODE BIT(1) /* enables DP mode */
> +
> +/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
> +#define ARCVR_DTCT_EN BIT(0)
> +#define ALFPS_DTCT_EN BIT(1)
> +#define ARCVR_DTCT_EVENT_SEL BIT(4)
> +
> +/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
> +#define IRQ_CLEAR BIT(0)
> +
> +/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
> +#define RCVR_DETECT BIT(0)
> +
> +/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
> +#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
> +
> +#define PHY_INIT_COMPLETE_TIMEOUT 10000
> +#define POWER_DOWN_DELAY_US_MIN 10
> +#define POWER_DOWN_DELAY_US_MAX 11
> +
> +#define MAX_PROP_NAME 32
> +
> +/* Define the assumed distance between lanes for underspecified device trees. */
> +#define QMP_PHY_LEGACY_LANE_STRIDE 0x400
> +
> +struct qmp_phy_init_tbl {
> + unsigned int offset;
> + unsigned int val;
> + /*
> + * register part of layout ?
> + * if yes, then offset gives index in the reg-layout
> + */
> + bool in_layout;
> + /*
> + * mask of lanes for which this register is written
> + * for cases when second lane needs different values
> + */
> + u8 lane_mask;
> +};
> +
> +#define QMP_PHY_INIT_CFG(o, v) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .lane_mask = 0xff, \
> + }
> +
> +#define QMP_PHY_INIT_CFG_L(o, v) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .in_layout = true, \
> + .lane_mask = 0xff, \
> + }
> +
> +#define QMP_PHY_INIT_CFG_LANE(o, v, l) \
> + { \
> + .offset = o, \
> + .val = v, \
> + .lane_mask = l, \
> + }
> +
> +/* set of registers with offsets different per-PHY */
> +enum qphy_reg_layout {
> + /* Common block control registers */
> + QPHY_COM_SW_RESET,
> + QPHY_COM_POWER_DOWN_CONTROL,
> + QPHY_COM_START_CONTROL,
> + QPHY_COM_PCS_READY_STATUS,
> + /* PCS registers */
> + QPHY_PLL_LOCK_CHK_DLY_TIME,
> + QPHY_FLL_CNTRL1,
> + QPHY_FLL_CNTRL2,
> + QPHY_FLL_CNT_VAL_L,
> + QPHY_FLL_CNT_VAL_H_TOL,
> + QPHY_FLL_MAN_CODE,
> + QPHY_SW_RESET,
> + QPHY_START_CTRL,
> + QPHY_PCS_READY_STATUS,
> + QPHY_PCS_STATUS,
> + QPHY_PCS_AUTONOMOUS_MODE_CTRL,
> + QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
> + QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
> + QPHY_PCS_POWER_DOWN_CONTROL,
> + /* PCS_MISC registers */
> + QPHY_PCS_MISC_TYPEC_CTRL,
> + /* Keep last to ensure regs_layout arrays are properly initialized */
> + QPHY_LAYOUT_SIZE
> +};
> +
> +static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x168,
> +};
> +
> +static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> +};
> +
> +static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_COM_SW_RESET] = 0x400,
> + [QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
> + [QPHY_COM_START_CONTROL] = 0x408,
> + [QPHY_COM_PCS_READY_STATUS] = 0x448,
> + [QPHY_PLL_LOCK_CHK_DLY_TIME] = 0xa8,
> + [QPHY_FLL_CNTRL1] = 0xc4,
> + [QPHY_FLL_CNTRL2] = 0xc8,
> + [QPHY_FLL_CNT_VAL_L] = 0xcc,
> + [QPHY_FLL_CNT_VAL_H_TOL] = 0xd0,
> + [QPHY_FLL_MAN_CODE] = 0xd4,
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> +};
> +
> +static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_FLL_CNTRL1] = 0xc0,
> + [QPHY_FLL_CNTRL2] = 0xc4,
> + [QPHY_FLL_CNT_VAL_L] = 0xc8,
> + [QPHY_FLL_CNT_VAL_H_TOL] = 0xcc,
> + [QPHY_FLL_MAN_CODE] = 0xd0,
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x17c,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
> +};
> +
> +static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
> +};
> +
> +static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x174,
> +};
> +
> +static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_STATUS] = 0x2ac,
> +};
> +
> +static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
> +};
> +
> +static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
> +};
> +
> +static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x1008,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
> +};
> +
> +static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
> + [QPHY_START_CTRL] = 0x08,
> + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8,
> + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
> + [QPHY_PCS_STATUS] = 0x174,
> + [QPHY_PCS_MISC_TYPEC_CTRL] = 0x00,
> +};
> +
> +static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x160,
> +};
> +
> +static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x168,
> +};
> +
> +static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_SW_RESET] = 0x00,
> + [QPHY_START_CTRL] = 0x44,
> + [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
> +};
> +
> +static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> + [QPHY_START_CTRL] = QPHY_V4_PCS_UFS_PHY_START,
> + [QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_UFS_READY_STATUS,
> + [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET,
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + /* PLL and Loop filter settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + /* SSC settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c),
> + QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> +
> + QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05),
> +
> + QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05),
> + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04),
> + /* PLL and Loop filter settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + /* SSC settings */
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42),
> + QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER1, 0x7d),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE0, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x29),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x53),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x61),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq6018_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
> + QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
> + QMP_PHY_INIT_CFG(PCS_COM_EQ_CONFIG5, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
> + QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
> + QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> + QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
> + QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_POST, 0x58),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
> + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
> +};
> +
> +static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
> + QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
> + QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
> + QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
> + QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
> + QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
> + QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x007),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_01, 0x59),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xbb),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG4, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2, 0x52),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4, 0x1a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5, 0x06),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SYSCLK_EN_SEL, 0x27),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BIAS_EN_CKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_ENABLE1, 0xb0),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE0, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_RESTRIM_CTRL2, 0x05),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VCO_TUNE_MAP, 0x10),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_SELECT, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_HSCLK_SEL1, 0x30),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORE_CLK_EN, 0x73),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SVS_MODE_CLK_SEL, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV1, 0x22),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV2, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BGV_TRIM, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BG_CTRL, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL0, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_TAP_EN, 0x0d),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TX_BAND_MODE, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_LANE_MODE, 0x1a),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PARALLEL_RATE, 0x2f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE0, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE1, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE2, 0x1b),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE2, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE0, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE1, 0x31),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE2, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_THRESH_DFE, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CGA_THRESH_DFE, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXENGINE_EN0, 0x12),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_TRAIN_TIME, 0x25),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_DFE_OVRLP_TIME, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_REFRESH_TIME, 0x05),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_ENABLE_TIME, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_GAIN, 0x26),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_GAIN, 0x12),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_OFFSET_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PRE_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_INTVAL, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EDAC_INITVAL, 0x28),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB0, 0x7f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB1, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RCVRDONE_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_CTRL, 0x70),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE0, 0x8b),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE2, 0x0a),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE2, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_BAND, 0x02),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE0, 0x5c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE1, 0x3e),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE2, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_ENABLES, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_CNTRL, 0xa0),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_DEGLITCH_CNTRL, 0x08),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DCC_GAIN, 0x01),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_EN_SIGNAL, 0xc3),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PSM_RX_EN_CAL, 0x00),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_MISC_CNTRL0, 0xbc),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TS0_TIMER, 0x7f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DLL_HIGHDATARATE, 0x15),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RESETCODE_OFFSET, 0x04),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_INITVAL, 0x20),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RSM_START, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_rx_tbl[] = {
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_qhp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG, 0x3f),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_PCS_TX_RX_CONFIG, 0x50),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M3P5DB, 0x19),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M3P5DB, 0x07),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M6DB, 0x17),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M6DB, 0x09),
> + QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG5, 0x9f),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x50),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = {
> + /* FLL settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> +
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb5),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4c),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x64),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x1E),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5B),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0D),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SVS_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5B),
> +};
> +
> +static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_RX_PWM_GEAR_BAND, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_DRV_LVL, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),
> + QMP_PHY_INIT_CFG(QPHY_RX_SYM_RESYNC_CTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_TX_LARGE_AMP_POST_EMP_LVL, 0x12),
> + QMP_PHY_INIT_CFG(QPHY_TX_SMALL_AMP_POST_EMP_LVL, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL2, 0x6e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SYM_RESYNC_CTRL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL1, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_MIN_HIBERN8_TIME, 0x9a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
> +
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x94),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
> + /* Lock Det settings */
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> +
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x5),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x6e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x39),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x39),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x35),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P6_P7_PRE, 0x33),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_EQ_CONFIG2, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x05),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG2, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x26),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x048),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x46),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_CFG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x50),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MISC1, 0x88),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTERNAL_DIG_CORECLK_DIV, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MODE, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_DC_LEVEL_CTRL, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x56),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x22),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_3, 0x13),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_VMODE_CTRL1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_PI_QEC_CTRL, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_FO_GAIN_RATE2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_UCDR_PI_CONTROLS, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_3, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_VGA_CAL_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x27),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2, 0x5a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B0, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B1, 0xf9),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B3, 0xce),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B4, 0x62),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B0, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B1, 0x7d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B3, 0xcf),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B4, 0xd6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_PHPRE_CTRL, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_MARG_COARSE_CTRL2, 0x12),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG2, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG4, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG5, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_EQ_CONFIG1, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G3_RXEQEVAL_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_RXEQEVAL_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG2, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0b),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x19),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x65),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xf5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf1),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x6d),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x6d),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xed),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x3c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xb7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0xb7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_INITVAL, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x01),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x00),
> +};
> +
> +static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0xb4),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x68),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xaa),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0x5c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_EQ_CONFIG2, 0x0f),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x46),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_CFG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0xd0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MISC1, 0x88),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_DC_LEVEL_CTRL, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xcc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xcc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x29),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0xc5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xad),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xb6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xc7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xef),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x81),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x05),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
> +};
> +
> +/* Register names should be validated, they might be different for this PHY */
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_EQ_CONFIG1, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3, 0x28),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
> +};
> +
> +struct qmp_phy;
> +
> +/* struct qmp_phy_cfg - per-PHY initialization config */
> +struct qmp_phy_cfg {
> + /* phy-type - PCIE/UFS/USB */
> + unsigned int type;
> + /* number of lanes provided by phy */
> + int nlanes;
> +
> + /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
> + const struct qmp_phy_init_tbl *serdes_tbl;
> + int serdes_tbl_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_sec;
> + int serdes_tbl_num_sec;
> + const struct qmp_phy_init_tbl *tx_tbl;
> + int tx_tbl_num;
> + const struct qmp_phy_init_tbl *tx_tbl_sec;
> + int tx_tbl_num_sec;
> + const struct qmp_phy_init_tbl *rx_tbl;
> + int rx_tbl_num;
> + const struct qmp_phy_init_tbl *rx_tbl_sec;
> + int rx_tbl_num_sec;
> + const struct qmp_phy_init_tbl *pcs_tbl;
> + int pcs_tbl_num;
> + const struct qmp_phy_init_tbl *pcs_tbl_sec;
> + int pcs_tbl_num_sec;
> + const struct qmp_phy_init_tbl *pcs_misc_tbl;
> + int pcs_misc_tbl_num;
> + const struct qmp_phy_init_tbl *pcs_misc_tbl_sec;
> + int pcs_misc_tbl_num_sec;
> +
> + /* Init sequence for DP PHY block link rates */
> + const struct qmp_phy_init_tbl *serdes_tbl_rbr;
> + int serdes_tbl_rbr_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr;
> + int serdes_tbl_hbr_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr2;
> + int serdes_tbl_hbr2_num;
> + const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
> + int serdes_tbl_hbr3_num;
> +
> + /* DP PHY callbacks */
> + int (*configure_dp_phy)(struct qmp_phy *qphy);
> + void (*configure_dp_tx)(struct qmp_phy *qphy);
> + int (*calibrate_dp_phy)(struct qmp_phy *qphy);
> + void (*dp_aux_init)(struct qmp_phy *qphy);
> +
> + /* clock ids to be requested */
> + const char * const *clk_list;
> + int num_clks;
> + /* resets to be requested */
> + const char * const *reset_list;
> + int num_resets;
> + /* regulators to be requested */
> + const char * const *vreg_list;
> + int num_vregs;
> +
> + /* array of registers with different offsets */
> + const unsigned int *regs;
> +
> + unsigned int start_ctrl;
> + unsigned int pwrdn_ctrl;
> + unsigned int mask_com_pcs_ready;
> + /* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
> + unsigned int phy_status;
> +
> + /* true, if PHY has a separate PHY_COM control block */
> + bool has_phy_com_ctrl;
> + /* true, if PHY has a reset for individual lanes */
> + bool has_lane_rst;
> + /* true, if PHY needs delay after POWER_DOWN */
> + bool has_pwrdn_delay;
> + /* power_down delay in usec */
> + int pwrdn_delay_min;
> + int pwrdn_delay_max;
> +
> + /* true, if PHY has a separate DP_COM control block */
> + bool has_phy_dp_com_ctrl;
> + /* true, if PHY has secondary tx/rx lanes to be configured */
> + bool is_dual_lane_phy;
> +
> + /* true, if PCS block has no separate SW_RESET register */
> + bool no_pcs_sw_reset;
> +};
> +
> +struct qmp_phy_combo_cfg {
> + const struct qmp_phy_cfg *usb_cfg;
> + const struct qmp_phy_cfg *dp_cfg;
> +};
> +
> +/**
> + * struct qmp_phy - per-lane phy descriptor
> + *
> + * @phy: generic phy
> + * @cfg: phy specific configuration
> + * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
> + * @tx: iomapped memory space for lane's tx
> + * @rx: iomapped memory space for lane's rx
> + * @pcs: iomapped memory space for lane's pcs
> + * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
> + * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> + * @pcs_misc: iomapped memory space for lane's pcs_misc
> + * @pipe_clk: pipe clock
> + * @index: lane index
> + * @qmp: QMP phy to which this lane belongs
> + * @lane_rst: lane's reset controller
> + * @mode: current PHY mode
> + * @dp_aux_cfg: Display port aux config
> + * @dp_opts: Display port optional config
> + * @dp_clks: Display port clocks
> + */
> +struct qmp_phy {
> + struct phy *phy;
> + const struct qmp_phy_cfg *cfg;
> + void __iomem *serdes;
> + void __iomem *tx;
> + void __iomem *rx;
> + void __iomem *pcs;
> + void __iomem *tx2;
> + void __iomem *rx2;
> + void __iomem *pcs_misc;
> + struct clk *pipe_clk;
> + unsigned int index;
> + struct qcom_qmp *qmp;
> + struct reset_control *lane_rst;
> + enum phy_mode mode;
> + unsigned int dp_aux_cfg;
> + struct phy_configure_opts_dp dp_opts;
> + struct qmp_phy_dp_clks *dp_clks;
> +};
> +
> +struct qmp_phy_dp_clks {
> + struct qmp_phy *qphy;
> + struct clk_hw dp_link_hw;
> + struct clk_hw dp_pixel_hw;
> +};
> +
> +/**
> + * struct qcom_qmp - structure holding QMP phy block attributes
> + *
> + * @dev: device
> + * @dp_com: iomapped memory space for phy's dp_com control block
> + *
> + * @clks: array of clocks required by phy
> + * @resets: array of resets required by phy
> + * @vregs: regulator supplies bulk data
> + *
> + * @phys: array of per-lane phy descriptors
> + * @phy_mutex: mutex lock for PHY common block initialization
> + * @init_count: phy common block initialization count
> + * @ufs_reset: optional UFS PHY reset handle
> + */
> +struct qcom_qmp {
> + struct device *dev;
> + void __iomem *dp_com;
> +
> + struct clk_bulk_data *clks;
> + struct reset_control **resets;
> + struct regulator_bulk_data *vregs;
> +
> + struct qmp_phy **phys;
> +
> + struct mutex phy_mutex;
> + int init_count;
> +
> + struct reset_control *ufs_reset;
> +};
> +
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
> +
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
> +
> +static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> +{
> + u32 reg;
> +
> + reg = readl(base + offset);
> + reg |= val;
> + writel(reg, base + offset);
> +
> + /* ensure that above write is through */
> + readl(base + offset);
> +}
> +
> +static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
> +{
> + u32 reg;
> +
> + reg = readl(base + offset);
> + reg &= ~val;
> + writel(reg, base + offset);
> +
> + /* ensure that above write is through */
> + readl(base + offset);
> +}
> +
> +/* list of clocks required by phy */
> +static const char * const msm8996_phy_clk_l[] = {
> + "aux", "cfg_ahb", "ref",
> +};
> +
> +static const char * const msm8996_ufs_phy_clk_l[] = {
> + "ref",
> +};
> +
> +static const char * const qmp_v3_phy_clk_l[] = {
> + "aux", "cfg_ahb", "ref", "com_aux",
> +};
> +
> +static const char * const sdm845_pciephy_clk_l[] = {
> + "aux", "cfg_ahb", "ref", "refgen",
> +};
> +
> +static const char * const qmp_v4_phy_clk_l[] = {
> + "aux", "ref_clk_src", "ref", "com_aux",
> +};
> +
> +/* the primary usb3 phy on sm8250 doesn't have a ref clock */
> +static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
> + "aux", "ref_clk_src", "com_aux"
> +};
> +
> +static const char * const sm8450_ufs_phy_clk_l[] = {
> + "qref", "ref", "ref_aux",
> +};
> +
> +static const char * const sdm845_ufs_phy_clk_l[] = {
> + "ref", "ref_aux",
> +};
> +
> +/* usb3 phy on sdx55 doesn't have com_aux clock */
> +static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
> + "aux", "cfg_ahb", "ref"
> +};
> +
> +static const char * const qcm2290_usb3phy_clk_l[] = {
> + "cfg_ahb", "ref", "com_aux",
> +};
> +
> +/* list of resets */
> +static const char * const msm8996_pciephy_reset_l[] = {
> + "phy", "common", "cfg",
> +};
> +
> +static const char * const msm8996_usb3phy_reset_l[] = {
> + "phy", "common",
> +};
> +
> +static const char * const sc7180_usb3phy_reset_l[] = {
> + "phy",
> +};
> +
> +static const char * const qcm2290_usb3phy_reset_l[] = {
> + "phy_phy", "phy",
> +};
> +
> +static const char * const sdm845_pciephy_reset_l[] = {
> + "phy",
> +};
> +
> +/* list of regulators */
> +static const char * const qmp_phy_vreg_l[] = {
> + "vdda-phy", "vdda-pll",
> +};
> +
> +static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq8074_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
> + .tx_tbl = msm8996_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
> + .rx_tbl = ipq8074_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq8074_usb3_rx_tbl),
> + .pcs_tbl = ipq8074_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq8074_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 3,
> +
> + .serdes_tbl = msm8996_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl),
> + .tx_tbl = msm8996_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl),
> + .rx_tbl = msm8996_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl),
> + .pcs_tbl = msm8996_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | PLL_READY_GATE_EN,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .mask_com_pcs_ready = PCS_READY,
> + .phy_status = PHYSTATUS,
> +
> + .has_phy_com_ctrl = true,
> + .has_lane_rst = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_ufs_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8996_ufs_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes_tbl),
> + .tx_tbl = msm8996_ufs_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx_tbl),
> + .rx_tbl = msm8996_ufs_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx_tbl),
> +
> + .clk_list = msm8996_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l),
> +
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> +
> + .regs = msm8996_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8996_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl),
> + .tx_tbl = msm8996_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
> + .rx_tbl = msm8996_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8996_usb3_rx_tbl),
> + .pcs_tbl = msm8996_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8996_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const char * const ipq8074_pciephy_clk_l[] = {
> + "aux", "cfg_ahb",
> +};
> +/* list of resets */
> +static const char * const ipq8074_pciephy_reset_l[] = {
> + "phy", "common",
> +};
> +
> +static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq8074_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
> + .tx_tbl = ipq8074_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_tx_tbl),
> + .rx_tbl = ipq8074_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
> + .pcs_tbl = ipq8074_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
> + .clk_list = ipq8074_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = NULL,
> + .num_vregs = 0,
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_phy_com_ctrl = false,
> + .has_lane_rst = false,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = ipq6018_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
> + .tx_tbl = ipq6018_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(ipq6018_pcie_tx_tbl),
> + .rx_tbl = ipq6018_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
> + .pcs_tbl = ipq6018_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
> + .clk_list = ipq8074_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = NULL,
> + .num_vregs = 0,
> + .regs = ipq_pciephy_gen3_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> +
> + .has_phy_com_ctrl = false,
> + .has_lane_rst = false,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sdm845_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_serdes_tbl),
> + .tx_tbl = sdm845_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_tx_tbl),
> + .rx_tbl = sdm845_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_rx_tbl),
> + .pcs_tbl = sdm845_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sdm845_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_qmp_pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sdm845_qhp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_serdes_tbl),
> + .tx_tbl = sdm845_qhp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_tx_tbl),
> + .rx_tbl = sdm845_qhp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_rx_tbl),
> + .pcs_tbl = sdm845_qhp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_qhp_pcie_pcs_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_qhp_pciephy_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
> + .serdes_tbl_sec = sm8250_qmp_gen3x1_pcie_serdes_tbl,
> + .serdes_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_serdes_tbl),
> + .tx_tbl = sm8250_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
> + .rx_tbl = sm8250_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
> + .rx_tbl_sec = sm8250_qmp_gen3x1_pcie_rx_tbl,
> + .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_rx_tbl),
> + .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
> + .pcs_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_tbl,
> + .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
> + .pcs_misc_tbl_sec = sm8250_qmp_gen3x1_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8250_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
> + .tx_tbl = sm8250_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_tx_tbl),
> + .tx_tbl_sec = sm8250_qmp_gen3x2_pcie_tx_tbl,
> + .tx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_tx_tbl),
> + .rx_tbl = sm8250_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_rx_tbl),
> + .rx_tbl_sec = sm8250_qmp_gen3x2_pcie_rx_tbl,
> + .rx_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_rx_tbl),
> + .pcs_tbl = sm8250_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_tbl),
> + .pcs_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_tbl,
> + .pcs_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8250_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
> + .pcs_misc_tbl_sec = sm8250_qmp_gen3x2_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num_sec = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> + .tx_tbl = qmp_v3_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
> + .usb_cfg = &sc7180_usb3phy_cfg,
> + .dp_cfg = &sc7180_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl),
> + .tx_tbl = qmp_v3_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_tx_tbl),
> + .rx_tbl = qmp_v3_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_rx_tbl),
> + .pcs_tbl = qmp_v3_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sdm845_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
> + .tx_tbl = sdm845_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
> + .rx_tbl = sdm845_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
> + .pcs_tbl = sdm845_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm6115_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
> + .tx_tbl = sm6115_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
> + .rx_tbl = sm6115_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
> + .pcs_tbl = sm6115_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm6115_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> +
> + .is_dual_lane_phy = false,
> + .no_pcs_sw_reset = true,
> +};
> +
> +static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8998_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl),
> + .tx_tbl = msm8998_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8998_pcie_tx_tbl),
> + .rx_tbl = msm8998_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8998_pcie_rx_tbl),
> + .pcs_tbl = msm8998_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = ipq8074_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = pciephy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +};
> +
> +static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = msm8998_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
> + .tx_tbl = msm8998_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(msm8998_usb3_tx_tbl),
> + .rx_tbl = msm8998_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
> + .pcs_tbl = msm8998_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
> + .clk_list = msm8996_phy_clk_l,
> + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8150_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
> + .tx_tbl = sm8150_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
> + .rx_tbl = sm8150_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
> + .pcs_tbl = sm8150_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8150_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_tx_tbl),
> + .rx_tbl = sm8150_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
> + .pcs_tbl = sm8150_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sc8180x_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_serdes_tbl),
> + .tx_tbl = sc8180x_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl),
> + .rx_tbl = sc8180x_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_rx_tbl),
> + .pcs_tbl = sc8180x_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sc8180x_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v4_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> + .tx_tbl = qmp_v4_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
> + .usb_cfg = &sm8150_usb3phy_cfg,
> + .dp_cfg = &sc8180x_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8150_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8150_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8250_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_tx_tbl),
> + .rx_tbl = sm8250_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
> + .pcs_tbl = sm8250_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8250_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8250_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v4_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> + .tx_tbl = qmp_v4_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
> + .usb_cfg = &sm8250_usb3phy_cfg,
> + .dp_cfg = &sm8250_dpphy_cfg,
> +};
> +
> +static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sdx55_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_tx_tbl),
> + .rx_tbl = sdx55_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_sdx55_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sdx55_qmp_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_serdes_tbl),
> + .tx_tbl = sdx55_qmp_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_tx_tbl),
> + .rx_tbl = sdx55_qmp_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_rx_tbl),
> + .pcs_tbl = sdx55_qmp_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_tbl),
> + .pcs_misc_tbl = sdx55_qmp_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = PCS_START | SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS_4_20,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sdx65_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_tx_tbl),
> + .rx_tbl = sdx65_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_sdx55_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8350_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8350_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
> + .tx_tbl = sm8350_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
> + .rx_tbl = sm8350_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
> + .pcs_tbl = sm8350_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> + .tx_tbl = sm8350_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_tx_tbl),
> + .rx_tbl = sm8350_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl),
> + .pcs_tbl = sm8350_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl),
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> + .tx_tbl = sm8350_usb3_uniphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
> + .rx_tbl = sm8350_usb3_uniphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
> + .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8350_usb3_uniphy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> +};
> +
> +static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8350_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
> + .tx_tbl = sm8350_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
> + .rx_tbl = sm8350_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
> + .pcs_tbl = sm8350_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
> + .clk_list = sm8450_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 1,
> +
> + .serdes_tbl = sm8450_qmp_gen3x1_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl),
> + .tx_tbl = sm8450_qmp_gen3x1_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl),
> + .rx_tbl = sm8450_qmp_gen3x1_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl),
> + .pcs_tbl = sm8450_qmp_gen3x1_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS,
> +
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8450_qmp_gen4x2_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_serdes_tbl),
> + .tx_tbl = sm8450_qmp_gen4x2_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_tx_tbl),
> + .rx_tbl = sm8450_qmp_gen4x2_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_rx_tbl),
> + .pcs_tbl = sm8450_qmp_gen4x2_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8450_qmp_gen4x2_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS_4_20,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> +static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> + .type = PHY_TYPE_USB3,
> + .nlanes = 1,
> +
> + .serdes_tbl = qcm2290_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
> + .tx_tbl = qcm2290_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qcm2290_usb3_tx_tbl),
> + .rx_tbl = qcm2290_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(qcm2290_usb3_rx_tbl),
> + .pcs_tbl = qcm2290_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
> + .clk_list = qcm2290_usb3phy_clk_l,
> + .num_clks = ARRAY_SIZE(qcm2290_usb3phy_clk_l),
> + .reset_list = qcm2290_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qcm2290_usb3phy_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .phy_status = PHYSTATUS,
> +
> + .is_dual_lane_phy = true,
> +};
> +
> +static void qcom_qmp_phy_configure_lane(void __iomem *base,
> + const unsigned int *regs,
> + const struct qmp_phy_init_tbl tbl[],
> + int num,
> + u8 lane_mask)
> +{
> + int i;
> + const struct qmp_phy_init_tbl *t = tbl;
> +
> + if (!t)
> + return;
> +
> + for (i = 0; i < num; i++, t++) {
> + if (!(t->lane_mask & lane_mask))
> + continue;
> +
> + if (t->in_layout)
> + writel(t->val, base + regs[t->offset]);
> + else
> + writel(t->val, base + t->offset);
> + }
> +}
> +
> +static void qcom_qmp_phy_configure(void __iomem *base,
> + const unsigned int *regs,
> + const struct qmp_phy_init_tbl tbl[],
> + int num)
> +{
> + qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff);
> +}
> +
> +static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
> + int serdes_tbl_num = cfg->serdes_tbl_num;
> + int ret;
> +
> + qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
> + if (cfg->serdes_tbl_sec)
> + qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
> + cfg->serdes_tbl_num_sec);
> +
> + if (cfg->type == PHY_TYPE_DP) {
> + switch (dp_opts->link_rate) {
> + case 1620:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_rbr,
> + cfg->serdes_tbl_rbr_num);
> + break;
> + case 2700:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr,
> + cfg->serdes_tbl_hbr_num);
> + break;
> + case 5400:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr2,
> + cfg->serdes_tbl_hbr2_num);
> + break;
> + case 8100:
> + qcom_qmp_phy_configure(serdes, cfg->regs,
> + cfg->serdes_tbl_hbr3,
> + cfg->serdes_tbl_hbr3_num);
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + }
> +
> +
> + if (cfg->has_phy_com_ctrl) {
> + void __iomem *status;
> + unsigned int mask, val;
> +
> + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
> + SERDES_START | PCS_START);
> +
> + status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
> + mask = cfg->mask_com_pcs_ready;
> +
> + ret = readl_poll_timeout(status, val, (val & mask), 10,
> + PHY_INIT_COMPLETE_TIMEOUT);
> + if (ret) {
> + dev_err(qmp->dev,
> + "phy common block init timed-out\n");
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + /* Turn on BIAS current for PHY/PLL */
> + writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
> + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
> + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_LANE_0_1_PWRDN |
> + DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
> + DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(QSERDES_V3_COM_BIAS_EN |
> + QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
> + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
> + QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
> + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0x24, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
> + writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
> + writel(0xbb, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
> + qphy->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
> + { 0x00, 0x0c, 0x15, 0x1a },
> + { 0x02, 0x0e, 0x16, 0xff },
> + { 0x02, 0x11, 0xff, 0xff },
> + { 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
> + { 0x02, 0x12, 0x16, 0x1a },
> + { 0x09, 0x19, 0x1f, 0xff },
> + { 0x10, 0x1f, 0xff, 0xff },
> + { 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> + { 0x00, 0x0c, 0x14, 0x19 },
> + { 0x00, 0x0b, 0x12, 0xff },
> + { 0x00, 0x0b, 0xff, 0xff },
> + { 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
> + { 0x08, 0x0f, 0x16, 0x1f },
> + { 0x11, 0x1e, 0x1f, 0xff },
> + { 0x19, 0x1f, 0xff, 0xff },
> + { 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
> + unsigned int drv_lvl_reg, unsigned int emp_post_reg)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + unsigned int v_level = 0, p_level = 0;
> + u8 voltage_swing_cfg, pre_emphasis_cfg;
> + int i;
> +
> + for (i = 0; i < dp_opts->lanes; i++) {
> + v_level = max(v_level, dp_opts->voltage[i]);
> + p_level = max(p_level, dp_opts->pre[i]);
> + }
> +
> + if (dp_opts->link_rate <= 2700) {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> + } else {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
> + }
> +
> + /* TODO: Move check to config check */
> + if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> + return -EINVAL;
> +
> + /* Enable MUX to use Cursor values from these registers */
> + voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> + pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> +
> + writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
> + writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
> + writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
> + writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 bias_en, drvr_en;
> +
> + if (qcom_qmp_phy_configure_dp_swing(qphy,
> + QSERDES_V3_TX_TX_DRV_LVL,
> + QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
> + return;
> +
> + if (dp_opts->lanes == 1) {
> + bias_en = 0x3e;
> + drvr_en = 0x13;
> + } else {
> + bias_en = 0x3f;
> + drvr_en = 0x10;
> + }
> +
> + writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> + writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> +}
> +
> +static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy)
> +{
> + u32 val;
> + bool reverse = false;
> +
> + val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
> +
> + /*
> + * TODO: Assume orientation is CC1 for now and two lanes, need to
> + * use type-c connector to understand orientation and lanes.
> + *
> + * Otherwise val changes to be like below if this code understood
> + * the orientation of the type-c cable.
> + *
> + * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
> + * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
> + * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
> + * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> + * if (orientation == ORIENTATION_CC2)
> + * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> + */
> + val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> + writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
> +
> + return reverse;
> +}
> +
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 phy_vco_div, status;
> + unsigned long pixel_freq;
> +
> + qcom_qmp_phy_configure_dp_mode(qphy);
> +
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> + writel(0x04, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
> + udelay(2000);
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000);
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> + static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
> + u8 val;
> +
> + qphy->dp_aux_cfg++;
> + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[qphy->dp_aux_cfg];
> +
> + writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + /* Turn on BIAS current for PHY/PLL */
> + writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
> + writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
> + writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
> + qphy->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + /* Program default values before writing proper values */
> + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +
> + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +
> + qcom_qmp_phy_configure_dp_swing(qphy,
> + QSERDES_V4_TX_TX_DRV_LVL,
> + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +}
> +
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 phy_vco_div, status;
> + unsigned long pixel_freq;
> + u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
> + bool reverse;
> +
> + writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
> +
> + reverse = qcom_qmp_phy_configure_dp_mode(qphy);
> +
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> +
> + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + /*
> + * At least for 7nm DP PHY this has to be done after enabling link
> + * clock.
> + */
> +
> + if (dp_opts->lanes == 1) {
> + bias0_en = reverse ? 0x3e : 0x15;
> + bias1_en = reverse ? 0x15 : 0x3e;
> + drvr0_en = reverse ? 0x13 : 0x10;
> + drvr1_en = reverse ? 0x10 : 0x13;
> + } else if (dp_opts->lanes == 2) {
> + bias0_en = reverse ? 0x3f : 0x15;
> + bias1_en = reverse ? 0x15 : 0x3f;
> + drvr0_en = 0x10;
> + drvr1_en = 0x10;
> + } else {
> + bias0_en = 0x3f;
> + bias1_en = 0x3f;
> + drvr0_en = 0x10;
> + drvr1_en = 0x10;
> + }
> +
> + writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
> + writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
> + writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
> + writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
> +
> + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
> + udelay(2000);
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
> + writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
> +
> + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +
> + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +
> + return 0;
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> + static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
> + u8 val;
> +
> + qphy->dp_aux_cfg++;
> + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[qphy->dp_aux_cfg];
> +
> + writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &opts->dp;
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
> + if (qphy->dp_opts.set_voltages) {
> + cfg->configure_dp_tx(qphy);
> + qphy->dp_opts.set_voltages = 0;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + if (cfg->calibrate_dp_phy)
> + return cfg->calibrate_dp_phy(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *dp_com = qmp->dp_com;
> + int ret, i;
> +
> + mutex_lock(&qmp->phy_mutex);
> + if (qmp->init_count++) {
> + mutex_unlock(&qmp->phy_mutex);
> + return 0;
> + }
> +
> + /* turn on regulator supplies */
> + ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
> + if (ret) {
> + dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
> + goto err_unlock;
> + }
> +
> + for (i = 0; i < cfg->num_resets; i++) {
> + ret = reset_control_assert(qmp->resets[i]);
> + if (ret) {
> + dev_err(qmp->dev, "%s reset assert failed\n",
> + cfg->reset_list[i]);
> + goto err_disable_regulators;
> + }
> + }
> +
> + for (i = cfg->num_resets - 1; i >= 0; i--) {
> + ret = reset_control_deassert(qmp->resets[i]);
> + if (ret) {
> + dev_err(qmp->dev, "%s reset deassert failed\n",
> + qphy->cfg->reset_list[i]);
> + goto err_assert_reset;
> + }
> + }
> +
> + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
> + if (ret)
> + goto err_assert_reset;
> +
> + if (cfg->has_phy_dp_com_ctrl) {
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
> + SW_PWRDN);
> + /* override hardware control for reset of qmp phy */
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +
> + /* Default type-c orientation, i.e CC1 */
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
> +
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
> + USB3_MODE | DP_MODE);
> +
> + /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
> + }
> +
> + if (cfg->has_phy_com_ctrl) {
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
> + SW_PWRDN);
> + } else {
> + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
> + qphy_setbits(pcs,
> + cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> + cfg->pwrdn_ctrl);
> + else
> + qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL,
> + cfg->pwrdn_ctrl);
> + }
> +
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +
> +err_assert_reset:
> + while (++i < cfg->num_resets)
> + reset_control_assert(qmp->resets[i]);
> +err_disable_regulators:
> + regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> +err_unlock:
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
> +{
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *serdes = qphy->serdes;
> + int i = cfg->num_resets;
> +
> + mutex_lock(&qmp->phy_mutex);
> + if (--qmp->init_count) {
> + mutex_unlock(&qmp->phy_mutex);
> + return 0;
> + }
> +
> + reset_control_assert(qmp->ufs_reset);
> + if (cfg->has_phy_com_ctrl) {
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
> + SERDES_START | PCS_START);
> + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET],
> + SW_RESET);
> + qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
> + SW_PWRDN);
> + }
> +
> + while (--i >= 0)
> + reset_control_assert(qmp->resets[i]);
> +
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> +
> + regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> +
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_init(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + int ret;
> + dev_vdbg(qmp->dev, "Initializing QMP phy\n");
> +
> + if (cfg->no_pcs_sw_reset) {
> + /*
> + * Get UFS reset, which is delayed until now to avoid a
> + * circular dependency where UFS needs its PHY, but the PHY
> + * needs this UFS reset.
> + */
> + if (!qmp->ufs_reset) {
> + qmp->ufs_reset =
> + devm_reset_control_get_exclusive(qmp->dev,
> + "ufsphy");
> +
> + if (IS_ERR(qmp->ufs_reset)) {
> + ret = PTR_ERR(qmp->ufs_reset);
> + dev_err(qmp->dev,
> + "failed to get UFS reset: %d\n",
> + ret);
> +
> + qmp->ufs_reset = NULL;
> + return ret;
> + }
> + }
> +
> + ret = reset_control_assert(qmp->ufs_reset);
> + if (ret)
> + return ret;
> + }
> +
> + ret = qcom_qmp_phy_com_init(qphy);
> + if (ret)
> + return ret;
> +
> + if (cfg->type == PHY_TYPE_DP)
> + cfg->dp_aux_init(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_power_on(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + struct qcom_qmp *qmp = qphy->qmp;
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *tx = qphy->tx;
> + void __iomem *rx = qphy->rx;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> + void __iomem *status;
> + unsigned int mask, val, ready;
> + int ret;
> +
> + qcom_qmp_phy_serdes_init(qphy);
> +
> + if (cfg->has_lane_rst) {
> + ret = reset_control_deassert(qphy->lane_rst);
> + if (ret) {
> + dev_err(qmp->dev, "lane%d reset deassert failed\n",
> + qphy->index);
> + return ret;
> + }
> + }
> +
> + ret = clk_prepare_enable(qphy->pipe_clk);
> + if (ret) {
> + dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
> + goto err_reset_lane;
> + }
> +
> + /* Tx, Rx, and PCS configurations */
> + qcom_qmp_phy_configure_lane(tx, cfg->regs,
> + cfg->tx_tbl, cfg->tx_tbl_num, 1);
> + if (cfg->tx_tbl_sec)
> + qcom_qmp_phy_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
> + cfg->tx_tbl_num_sec, 1);
> +
> + /* Configuration for other LANE for USB-DP combo PHY */
> + if (cfg->is_dual_lane_phy) {
> + qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
> + cfg->tx_tbl, cfg->tx_tbl_num, 2);
> + if (cfg->tx_tbl_sec)
> + qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
> + cfg->tx_tbl_sec,
> + cfg->tx_tbl_num_sec, 2);
> + }
> +
> + /* Configure special DP tx tunings */
> + if (cfg->type == PHY_TYPE_DP)
> + cfg->configure_dp_tx(qphy);
> +
> + qcom_qmp_phy_configure_lane(rx, cfg->regs,
> + cfg->rx_tbl, cfg->rx_tbl_num, 1);
> + if (cfg->rx_tbl_sec)
> + qcom_qmp_phy_configure_lane(rx, cfg->regs,
> + cfg->rx_tbl_sec, cfg->rx_tbl_num_sec, 1);
> +
> + if (cfg->is_dual_lane_phy) {
> + qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
> + cfg->rx_tbl, cfg->rx_tbl_num, 2);
> + if (cfg->rx_tbl_sec)
> + qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
> + cfg->rx_tbl_sec,
> + cfg->rx_tbl_num_sec, 2);
> + }
> +
> + /* Configure link rate, swing, etc. */
> + if (cfg->type == PHY_TYPE_DP) {
> + cfg->configure_dp_phy(qphy);
> + } else {
> + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
> + if (cfg->pcs_tbl_sec)
> + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
> + cfg->pcs_tbl_num_sec);
> + }
> +
> + ret = reset_control_deassert(qmp->ufs_reset);
> + if (ret)
> + goto err_disable_pipe_clk;
> +
> + qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
> + cfg->pcs_misc_tbl_num);
> + if (cfg->pcs_misc_tbl_sec)
> + qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
> + cfg->pcs_misc_tbl_num_sec);
> +
> + /*
> + * Pull out PHY from POWER DOWN state.
> + * This is active low enable signal to power-down PHY.
> + */
> + if(cfg->type == PHY_TYPE_PCIE)
> + qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
> +
> + if (cfg->has_pwrdn_delay)
> + usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
> +
> + if (cfg->type != PHY_TYPE_DP) {
> + /* Pull PHY out of reset state */
> + if (!cfg->no_pcs_sw_reset)
> + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> + /* start SerDes and Phy-Coding-Sublayer */
> + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> +
> + if (cfg->type == PHY_TYPE_UFS) {
> + status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
> + mask = PCS_READY;
> + ready = PCS_READY;
> + } else {
> + status = pcs + cfg->regs[QPHY_PCS_STATUS];
> + mask = cfg->phy_status;
> + ready = 0;
> + }
> +
> + ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
> + PHY_INIT_COMPLETE_TIMEOUT);
> + if (ret) {
> + dev_err(qmp->dev, "phy initialization timed-out\n");
> + goto err_disable_pipe_clk;
> + }
> + }
> + return 0;
> +
> +err_disable_pipe_clk:
> + clk_disable_unprepare(qphy->pipe_clk);
> +err_reset_lane:
> + if (cfg->has_lane_rst)
> + reset_control_assert(qphy->lane_rst);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_power_off(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + clk_disable_unprepare(qphy->pipe_clk);
> +
> + if (cfg->type == PHY_TYPE_DP) {
> + /* Assert DP PHY power down */
> + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> + } else {
> + /* PHY reset */
> + if (!cfg->no_pcs_sw_reset)
> + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> +
> + /* stop SerDes and Phy-Coding-Sublayer */
> + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> +
> + /* Put PHY into POWER DOWN state: active low */
> + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
> + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> + cfg->pwrdn_ctrl);
> + } else {
> + qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL,
> + cfg->pwrdn_ctrl);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_exit(struct phy *phy)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + if (cfg->has_lane_rst)
> + reset_control_assert(qphy->lane_rst);
> +
> + qcom_qmp_phy_com_exit(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_enable(struct phy *phy)
> +{
> + int ret;
> +
> + ret = qcom_qmp_phy_init(phy);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_power_on(phy);
> + if (ret)
> + qcom_qmp_phy_exit(phy);
> +
> + return ret;
> +}
> +
> +static int qcom_qmp_phy_disable(struct phy *phy)
> +{
> + int ret;
> +
> + ret = qcom_qmp_phy_power_off(phy);
> + if (ret)
> + return ret;
> + return qcom_qmp_phy_exit(phy);
> +}
> +
> +static int qcom_qmp_phy_set_mode(struct phy *phy,
> + enum phy_mode mode, int submode)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> +
> + qphy->mode = mode;
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> + u32 intr_mask;
> +
> + if (qphy->mode == PHY_MODE_USB_HOST_SS ||
> + qphy->mode == PHY_MODE_USB_DEVICE_SS)
> + intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
> + else
> + intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
> +
> + /* Clear any pending interrupts status */
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> + /* Writing 1 followed by 0 clears the interrupt */
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> +
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
> + ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
> +
> + /* Enable required PHY autonomous mode interrupts */
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
> +
> + /* Enable i/o clamp_n for autonomous mode */
> + if (pcs_misc)
> + qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
> +}
> +
> +static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + void __iomem *pcs = qphy->pcs;
> + void __iomem *pcs_misc = qphy->pcs_misc;
> +
> + /* Disable i/o clamp_n on resume for normal mode */
> + if (pcs_misc)
> + qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
> +
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
> + ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
> +
> + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> + /* Writing 1 followed by 0 clears the interrupt */
> + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
> +}
> +
> +static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct qmp_phy *qphy = qmp->phys[0];
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> +
> + dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
> +
> + /* Supported only for USB3 PHY and luckily USB3 is the first phy */
> + if (cfg->type != PHY_TYPE_USB3)
> + return 0;
> +
> + if (!qmp->init_count) {
> + dev_vdbg(dev, "PHY not initialized, bailing out\n");
> + return 0;
> + }
> +
> + qcom_qmp_phy_enable_autonomous_mode(qphy);
> +
> + clk_disable_unprepare(qphy->pipe_clk);
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct qmp_phy *qphy = qmp->phys[0];
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
> + int ret = 0;
> +
> + dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
> +
> + /* Supported only for USB3 PHY and luckily USB3 is the first phy */
> + if (cfg->type != PHY_TYPE_USB3)
> + return 0;
> +
> + if (!qmp->init_count) {
> + dev_vdbg(dev, "PHY not initialized, bailing out\n");
> + return 0;
> + }
> +
> + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(qphy->pipe_clk);
> + if (ret) {
> + dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
> + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
> + return ret;
> + }
> +
> + qcom_qmp_phy_disable_autonomous_mode(qphy);
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int num = cfg->num_vregs;
> + int i;
> +
> + qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
> + if (!qmp->vregs)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++)
> + qmp->vregs[i].supply = cfg->vreg_list[i];
> +
> + return devm_regulator_bulk_get(dev, num, qmp->vregs);
> +}
> +
> +static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int i;
> +
> + qmp->resets = devm_kcalloc(dev, cfg->num_resets,
> + sizeof(*qmp->resets), GFP_KERNEL);
> + if (!qmp->resets)
> + return -ENOMEM;
> +
> + for (i = 0; i < cfg->num_resets; i++) {
> + struct reset_control *rst;
> + const char *name = cfg->reset_list[i];
> +
> + rst = devm_reset_control_get_exclusive(dev, name);
> + if (IS_ERR(rst)) {
> + dev_err(dev, "failed to get %s reset\n", name);
> + return PTR_ERR(rst);
> + }
> + qmp->resets[i] = rst;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + int num = cfg->num_clks;
> + int i;
> +
> + qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
> + if (!qmp->clks)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++)
> + qmp->clks[i].id = cfg->clk_list[i];
> +
> + return devm_clk_bulk_get(dev, num, qmp->clks);
> +}
> +
> +static void phy_clk_release_provider(void *res)
> +{
> + of_clk_del_provider(res);
> +}
> +
> +/*
> + * Register a fixed rate pipe clock.
> + *
> + * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
> + * controls it. The <s>_pipe_clk coming out of the GCC is requested
> + * by the PHY driver for its operations.
> + * We register the <s>_pipe_clksrc here. The gcc driver takes care
> + * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
> + * Below picture shows this relationship.
> + *
> + * +---------------+
> + * | PHY block |<<---------------------------------------+
> + * | | |
> + * | +-------+ | +-----+ |
> + * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
> + * clk | +-------+ | +-----+
> + * +---------------+
> + */
> +static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
> +{
> + struct clk_fixed_rate *fixed;
> + struct clk_init_data init = { };
> + int ret;
> +
> + ret = of_property_read_string(np, "clock-output-names", &init.name);
> + if (ret) {
> + dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
> + return ret;
> + }
> +
> + fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
> + if (!fixed)
> + return -ENOMEM;
> +
> + init.ops = &clk_fixed_rate_ops;
> +
> + /* controllers using QMP phys use 125MHz pipe clock interface */
> + fixed->fixed_rate = 125000000;
> + fixed->hw.init = &init;
> +
> + ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
> + if (ret)
> + return ret;
> +
> + ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
> + if (ret)
> + return ret;
> +
> + /*
> + * Roll a devm action because the clock provider is the child node, but
> + * the child node is not actually a device.
> + */
> + return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
> +}
> +
> +/*
> + * Display Port PLL driver block diagram for branch clocks
> + *
> + * +------------------------------+
> + * | DP_VCO_CLK |
> + * | |
> + * | +-------------------+ |
> + * | | (DP PLL/VCO) | |
> + * | +---------+---------+ |
> + * | v |
> + * | +----------+-----------+ |
> + * | | hsclk_divsel_clk_src | |
> + * | +----------+-----------+ |
> + * +------------------------------+
> + * |
> + * +---------<---------v------------>----------+
> + * | |
> + * +--------v----------------+ |
> + * | dp_phy_pll_link_clk | |
> + * | link_clk | |
> + * +--------+----------------+ |
> + * | |
> + * | |
> + * v v
> + * Input to DISPCC block |
> + * for link clk, crypto clk |
> + * and interface clock |
> + * |
> + * |
> + * +--------<------------+-----------------+---<---+
> + * | | |
> + * +----v---------+ +--------v-----+ +--------v------+
> + * | vco_divided | | vco_divided | | vco_divided |
> + * | _clk_src | | _clk_src | | _clk_src |
> + * | | | | | |
> + * |divsel_six | | divsel_two | | divsel_four |
> + * +-------+------+ +-----+--------+ +--------+------+
> + * | | |
> + * v---->----------v-------------<------v
> + * |
> + * +----------+-----------------+
> + * | dp_phy_pll_vco_div_clk |
> + * +---------+------------------+
> + * |
> + * v
> + * Input to DISPCC block
> + * for DP pixel clock
> + *
> + */
> +static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + switch (req->rate) {
> + case 1620000000UL / 2:
> + case 2700000000UL / 2:
> + /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned long
> +qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + const struct qmp_phy_dp_clks *dp_clks;
> + const struct qmp_phy *qphy;
> + const struct phy_configure_opts_dp *dp_opts;
> +
> + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
> + qphy = dp_clks->qphy;
> + dp_opts = &qphy->dp_opts;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + return 1620000000UL / 2;
> + case 2700:
> + return 2700000000UL / 2;
> + case 5400:
> + return 5400000000UL / 4;
> + case 8100:
> + return 8100000000UL / 6;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = {
> + .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate,
> + .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate,
> +};
> +
> +static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + switch (req->rate) {
> + case 162000000:
> + case 270000000:
> + case 540000000:
> + case 810000000:
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned long
> +qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + const struct qmp_phy_dp_clks *dp_clks;
> + const struct qmp_phy *qphy;
> + const struct phy_configure_opts_dp *dp_opts;
> +
> + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
> + qphy = dp_clks->qphy;
> + dp_opts = &qphy->dp_opts;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + case 2700:
> + case 5400:
> + case 8100:
> + return dp_opts->link_rate * 100000;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct clk_ops qcom_qmp_dp_link_clk_ops = {
> + .determine_rate = qcom_qmp_dp_link_clk_determine_rate,
> + .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate,
> +};
> +
> +static struct clk_hw *
> +qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
> +{
> + struct qmp_phy_dp_clks *dp_clks = data;
> + unsigned int idx = clkspec->args[0];
> +
> + if (idx >= 2) {
> + pr_err("%s: invalid index %u\n", __func__, idx);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + if (idx == 0)
> + return &dp_clks->dp_link_hw;
> +
> + return &dp_clks->dp_pixel_hw;
> +}
> +
> +static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
> + struct device_node *np)
> +{
> + struct clk_init_data init = { };
> + struct qmp_phy_dp_clks *dp_clks;
> + char name[64];
> + int ret;
> +
> + dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
> + if (!dp_clks)
> + return -ENOMEM;
> +
> + dp_clks->qphy = qphy;
> + qphy->dp_clks = dp_clks;
> +
> + snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
> + init.ops = &qcom_qmp_dp_link_clk_ops;
> + init.name = name;
> + dp_clks->dp_link_hw.init = &init;
> + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
> + if (ret)
> + return ret;
> +
> + snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev));
> + init.ops = &qcom_qmp_dp_pixel_clk_ops;
> + init.name = name;
> + dp_clks->dp_pixel_hw.init = &init;
> + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
> + if (ret)
> + return ret;
> +
> + ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks);
> + if (ret)
> + return ret;
> +
> + /*
> + * Roll a devm action because the clock provider is the child node, but
> + * the child node is not actually a device.
> + */
> + return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
> +}
> +
> +static const struct phy_ops qcom_qmp_phy_gen_ops = {
> + .init = qcom_qmp_phy_enable,
> + .exit = qcom_qmp_phy_disable,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct phy_ops qcom_qmp_phy_dp_ops = {
> + .init = qcom_qmp_phy_init,
> + .configure = qcom_qmp_dp_phy_configure,
> + .power_on = qcom_qmp_phy_power_on,
> + .calibrate = qcom_qmp_dp_phy_calibrate,
> + .power_off = qcom_qmp_phy_power_off,
> + .exit = qcom_qmp_phy_exit,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
> + .power_on = qcom_qmp_phy_enable,
> + .power_off = qcom_qmp_phy_disable,
> + .set_mode = qcom_qmp_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static void qcom_qmp_reset_control_put(void *data)
> +{
> + reset_control_put(data);
> +}
> +
> +static
> +int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
> + void __iomem *serdes, const struct qmp_phy_cfg *cfg)
> +{
> + struct qcom_qmp *qmp = dev_get_drvdata(dev);
> + struct phy *generic_phy;
> + struct qmp_phy *qphy;
> + const struct phy_ops *ops;
> + char prop_name[MAX_PROP_NAME];
> + int ret;
> +
> + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
> + if (!qphy)
> + return -ENOMEM;
> +
> + qphy->cfg = cfg;
> + qphy->serdes = serdes;
> + /*
> + * Get memory resources for each phy lane:
> + * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
> + * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
> + * For single lane PHYs: pcs_misc (optional) -> 3.
> + */
> + qphy->tx = of_iomap(np, 0);
> + if (!qphy->tx)
> + return -ENOMEM;
> +
> + qphy->rx = of_iomap(np, 1);
> + if (!qphy->rx)
> + return -ENOMEM;
> +
> + qphy->pcs = of_iomap(np, 2);
> + if (!qphy->pcs)
> + return -ENOMEM;
> +
> + /*
> + * If this is a dual-lane PHY, then there should be registers for the
> + * second lane. Some old device trees did not specify this, so fall
> + * back to old legacy behavior of assuming they can be reached at an
> + * offset from the first lane.
> + */
> + if (cfg->is_dual_lane_phy) {
> + qphy->tx2 = of_iomap(np, 3);
> + qphy->rx2 = of_iomap(np, 4);
> + if (!qphy->tx2 || !qphy->rx2) {
> + dev_warn(dev,
> + "Underspecified device tree, falling back to legacy register regions\n");
> +
> + /* In the old version, pcs_misc is at index 3. */
> + qphy->pcs_misc = qphy->tx2;
> + qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
> + qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
> +
> + } else {
> + qphy->pcs_misc = of_iomap(np, 5);
> + }
> +
> + } else {
> + qphy->pcs_misc = of_iomap(np, 3);
> + }
> +
> + if (!qphy->pcs_misc)
> + dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
> +
> + /*
> + * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
> + * based phys, so they essentially have pipe clock. So,
> + * we return error in case phy is USB3 or PIPE type.
> + * Otherwise, we initialize pipe clock to NULL for
> + * all phys that don't need this.
> + */
> + snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
> + qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
> + if (IS_ERR(qphy->pipe_clk)) {
> + if (cfg->type == PHY_TYPE_PCIE ||
> + cfg->type == PHY_TYPE_USB3) {
> + ret = PTR_ERR(qphy->pipe_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev,
> + "failed to get lane%d pipe_clk, %d\n",
> + id, ret);
> + return ret;
> + }
> + qphy->pipe_clk = NULL;
> + }
> +
> + /* Get lane reset, if any */
> + if (cfg->has_lane_rst) {
> + snprintf(prop_name, sizeof(prop_name), "lane%d", id);
> + qphy->lane_rst = of_reset_control_get_exclusive(np, prop_name);
> + if (IS_ERR(qphy->lane_rst)) {
> + dev_err(dev, "failed to get lane%d reset\n", id);
> + return PTR_ERR(qphy->lane_rst);
> + }
> + ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put,
> + qphy->lane_rst);
> + if (ret)
> + return ret;
> + }
> +
> + if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE)
> + ops = &qcom_qmp_pcie_ufs_ops;
> + else if (cfg->type == PHY_TYPE_DP)
> + ops = &qcom_qmp_phy_dp_ops;
> + else
> + ops = &qcom_qmp_phy_gen_ops;
> +
> + generic_phy = devm_phy_create(dev, np, ops);
> + if (IS_ERR(generic_phy)) {
> + ret = PTR_ERR(generic_phy);
> + dev_err(dev, "failed to create qphy %d\n", ret);
> + return ret;
> + }
> +
> + qphy->phy = generic_phy;
> + qphy->index = id;
> + qphy->qmp = qmp;
> + qmp->phys[id] = qphy;
> + phy_set_drvdata(generic_phy, qphy);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
> + {
> + .compatible = "qcom,ipq8074-qmp-usb3-phy",
> + .data = &ipq8074_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-pcie-phy",
> + .data = &msm8996_pciephy_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-ufs-phy",
> + .data = &msm8996_ufs_cfg,
> + }, {
> + .compatible = "qcom,msm8996-qmp-usb3-phy",
> + .data = &msm8996_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-pcie-phy",
> + .data = &msm8998_pciephy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,ipq8074-qmp-pcie-phy",
> + .data = &ipq8074_pciephy_cfg,
> + }, {
> + .compatible = "qcom,ipq6018-qmp-pcie-phy",
> + .data = &ipq6018_pciephy_cfg,
> + }, {
> + .compatible = "qcom,ipq6018-qmp-usb3-phy",
> + .data = &ipq8074_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc7180-qmp-usb3-phy",
> + .data = &sc7180_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sc8180x-qmp-pcie-phy",
> + .data = &sc8180x_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sc8280xp-qmp-ufs-phy",
> + .data = &sm8350_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-usb3-phy",
> + .data = &sm8150_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sdm845-qhp-pcie-phy",
> + .data = &sdm845_qhp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-pcie-phy",
> + .data = &sdm845_qmp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-usb3-phy",
> + .data = &qmp_v3_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-usb3-uni-phy",
> + .data = &qmp_v3_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,msm8998-qmp-usb3-phy",
> + .data = &msm8998_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm6115-qmp-ufs-phy",
> + .data = &sm6115_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm6350-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-ufs-phy",
> + .data = &sm8150_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-usb3-phy",
> + .data = &sm8150_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8150-qmp-usb3-uni-phy",
> + .data = &sm8150_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-phy",
> + .data = &sm8250_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-uni-phy",
> + .data = &sm8250_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy",
> + .data = &sm8250_qmp_gen3x1_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy",
> + .data = &sm8250_qmp_gen3x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-ufs-phy",
> + .data = &sm8350_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-modem-pcie-phy",
> + .data = &sm8250_qmp_gen3x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdx55-qmp-pcie-phy",
> + .data = &sdx55_qmp_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sdx55-qmp-usb3-uni-phy",
> + .data = &sdx55_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sdx65-qmp-usb3-uni-phy",
> + .data = &sdx65_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-usb3-phy",
> + .data = &sm8350_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8350-qmp-usb3-uni-phy",
> + .data = &sm8350_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
> + .data = &sm8450_qmp_gen3x1_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
> + .data = &sm8450_qmp_gen4x2_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-ufs-phy",
> + .data = &sm8450_ufsphy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-usb3-phy",
> + .data = &sm8350_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,qcm2290-qmp-usb3-phy",
> + .data = &qcm2290_usb3phy_cfg,
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
> +
> +static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
> + {
> + .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
> + .data = &sc7180_usb3dpphy_cfg,
> + },
> + {
> + .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> + .data = &sm8250_usb3dpphy_cfg,
> + },
> + {
> + .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
> + .data = &sc8180x_usb3dpphy_cfg,
> + },
> + { }
> +};
> +
> +static const struct dev_pm_ops qcom_qmp_phy_pm_ops = {
> + SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend,
> + qcom_qmp_phy_runtime_resume, NULL)
> +};
> +
> +static int qcom_qmp_phy_probe(struct platform_device *pdev)
> +{
> + struct qcom_qmp *qmp;
> + struct device *dev = &pdev->dev;
> + struct device_node *child;
> + struct phy_provider *phy_provider;
> + void __iomem *serdes;
> + void __iomem *usb_serdes;
> + void __iomem *dp_serdes = NULL;
> + const struct qmp_phy_combo_cfg *combo_cfg = NULL;
> + const struct qmp_phy_cfg *cfg = NULL;
> + const struct qmp_phy_cfg *usb_cfg = NULL;
> + const struct qmp_phy_cfg *dp_cfg = NULL;
> + int num, id, expected_phys;
> + int ret;
> +
> + qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
> + if (!qmp)
> + return -ENOMEM;
> +
> + qmp->dev = dev;
> + dev_set_drvdata(dev, qmp);
> +
> + /* Get the specific init parameters of QMP phy */
> + cfg = of_device_get_match_data(dev);
> + if (!cfg) {
> + const struct of_device_id *match;
> +
> + match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev);
> + if (!match)
> + return -EINVAL;
> +
> + combo_cfg = match->data;
> + if (!combo_cfg)
> + return -EINVAL;
> +
> + usb_cfg = combo_cfg->usb_cfg;
> + cfg = usb_cfg; /* Setup clks and regulators */
> + }
> +
> + /* per PHY serdes; usually located at base address */
> + usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(serdes))
> + return PTR_ERR(serdes);
> +
> + /* per PHY dp_com; if PHY has dp_com control block */
> + if (combo_cfg || cfg->has_phy_dp_com_ctrl) {
> + qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
> + if (IS_ERR(qmp->dp_com))
> + return PTR_ERR(qmp->dp_com);
> + }
> +
> + if (combo_cfg) {
> + /* Only two serdes for combo PHY */
> + dp_serdes = devm_platform_ioremap_resource(pdev, 2);
> + if (IS_ERR(dp_serdes))
> + return PTR_ERR(dp_serdes);
> +
> + dp_cfg = combo_cfg->dp_cfg;
> + expected_phys = 2;
> + } else {
> + expected_phys = cfg->nlanes;
> + }
> +
> + mutex_init(&qmp->phy_mutex);
> +
> + ret = qcom_qmp_phy_clk_init(dev, cfg);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_reset_init(dev, cfg);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_vreg_init(dev, cfg);
> + if (ret) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "failed to get regulator supplies: %d\n",
> + ret);
> + return ret;
> + }
> +
> + num = of_get_available_child_count(dev->of_node);
> + /* do we have a rogue child node ? */
> + if (num > expected_phys)
> + return -EINVAL;
> +
> + qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
> + if (!qmp->phys)
> + return -ENOMEM;
> +
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> + /*
> + * Prevent runtime pm from being ON by default. Users can enable
> + * it using power/control in sysfs.
> + */
> + pm_runtime_forbid(dev);
> +
> + id = 0;
> + for_each_available_child_of_node(dev->of_node, child) {
> + if (of_node_name_eq(child, "dp-phy")) {
> + cfg = dp_cfg;
> + serdes = dp_serdes;
> + } else if (of_node_name_eq(child, "usb3-phy")) {
> + cfg = usb_cfg;
> + serdes = usb_serdes;
> + }
> +
> + /* Create per-lane phy */
> + ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg);
> + if (ret) {
> + dev_err(dev, "failed to create lane%d phy, %d\n",
> + id, ret);
> + goto err_node_put;
> + }
> +
> + /*
> + * Register the pipe clock provided by phy.
> + * See function description to see details of this pipe clock.
> + */
> + if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) {
> + ret = phy_pipe_clk_register(qmp, child);
> + if (ret) {
> + dev_err(qmp->dev,
> + "failed to register pipe clock source\n");
> + goto err_node_put;
> + }
> + } else if (cfg->type == PHY_TYPE_DP) {
> + ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
> + if (ret) {
> + dev_err(qmp->dev,
> + "failed to register DP clock source\n");
> + goto err_node_put;
> + }
> + }
> + id++;
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (!IS_ERR(phy_provider))
> + dev_info(dev, "Registered Qcom-QMP phy\n");
> + else
> + pm_runtime_disable(dev);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +
> +err_node_put:
> + pm_runtime_disable(dev);
> + of_node_put(child);
> + return ret;
> +}
> +
> +static struct platform_driver qcom_qmp_phy_driver = {
> + .probe = qcom_qmp_phy_probe,
> + .driver = {
> + .name = "qcom-qmp-phy",
> + .pm = &qcom_qmp_phy_pm_ops,
> + .of_match_table = qcom_qmp_phy_of_match_table,
> + },
> +};
> +
> +module_platform_driver(qcom_qmp_phy_driver);
> +
> +MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
> +MODULE_DESCRIPTION("Qualcomm QMP PHY driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.35.1
>
>
--
~Vinod
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 000/731] 5.15.86-rc1 review
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (730 preceding siblings ...)
2022-12-28 14:43 ` [PATCH 5.15 731/731] extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered Greg Kroah-Hartman
@ 2022-12-28 19:08 ` Florian Fainelli
2022-12-28 20:42 ` Slade Watkins
` (9 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Florian Fainelli @ 2022-12-28 19:08 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, sudipm.mukherjee, srw, rwarsow
On 12/28/2022 6:31 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.86 release.
> There are 731 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 30 Dec 2022 14:41:39 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.86-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on
BMIPS_GENERIC:
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 190/731] net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write()
2022-12-28 14:34 ` [PATCH 5.15 190/731] net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write() Greg Kroah-Hartman
@ 2022-12-28 19:44 ` patchwork-bot+netdevbpf
0 siblings, 0 replies; 763+ messages in thread
From: patchwork-bot+netdevbpf @ 2022-12-28 19:44 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, lkp, dhowells, marc.dionne, linux-afs, netdev, sashal
Hello:
This series was applied to bpf/bpf.git (master)
by Arnaldo Carvalho de Melo <acme@redhat.com>:
On Wed, 28 Dec 2022 15:34:57 +0100 you wrote:
> From: David Howells <dhowells@redhat.com>
>
> [ Upstream commit c3d96f690a790074b508fe183a41e36a00cd7ddd ]
>
> Provide a CONFIG_PROC_FS=n fallback for proc_create_net_single_write().
>
> Also provide a fallback for proc_create_net_data_write().
>
> [...]
Here is the summary with links:
- [5.15,190/731] net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write()
(no matching commit)
- [5.15,514/731] perf trace: Return error if a system call doesnt exist
https://git.kernel.org/bpf/bpf/c/d4223e1776c3
- [5.15,515/731] perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number
https://git.kernel.org/bpf/bpf/c/eadcab4c7a66
- [5.15,516/731] perf trace: Handle failure when trace point folder is missed
https://git.kernel.org/bpf/bpf/c/03e9a5d8eb55
- [5.15,643/731] igb: Do not free q_vector unless new one was allocated
(no matching commit)
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 000/731] 5.15.86-rc1 review
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (731 preceding siblings ...)
2022-12-28 19:08 ` [PATCH 5.15 000/731] 5.15.86-rc1 review Florian Fainelli
@ 2022-12-28 20:42 ` Slade Watkins
2022-12-29 3:42 ` Bagas Sanjaya
` (8 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Slade Watkins @ 2022-12-28 20:42 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, rwarsow
On Wed, Dec 28, 2022 at 9:44 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.15.86 release.
> There are 731 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 30 Dec 2022 14:41:39 +0000.
> Anything received after that time might be too late.
Compiled and tested on my x86_64 test systems, no errors or
regressions to report.
Tested-by: Slade Watkins <srw@sladewatkins.net>
-- Slade
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 456/731] extcon: usbc-tusb320: Update state on probe even if no IRQ pending
2022-12-28 15:45 ` Alvin Šipraga
@ 2022-12-28 21:04 ` Peter Rosin
2022-12-29 0:09 ` Peter Rosin
0 siblings, 1 reply; 763+ messages in thread
From: Peter Rosin @ 2022-12-28 21:04 UTC (permalink / raw)
To: Alvin Šipraga, Greg Kroah-Hartman, Marek Vasut
Cc: stable, patches, Heikki Krogerus, Sasha Levin
Hi!
2022-12-28 at 16:45, Alvin Šipraga wrote:
> On Wed, Dec 28, 2022 at 03:39:23PM +0100, Greg Kroah-Hartman wrote:
>> From: Marek Vasut <marex@denx.de>
>>
>> [ Upstream commit 581c848b610dbf3fe1ed4d85fd53d0743c61faba ]
>>
>> Currently this driver triggers extcon and typec state update in its
>> probe function, to read out current state reported by the chip and
>> report the correct state to upper layers. This synchronization is
>> performed correctly, but only in case the chip indicates a pending
>> interrupt in reg09 register.
>>
>> This fails to cover the situation where all interrupts reported by
>> the chip were already handled by Linux before reboot, then the system
>> rebooted, and then Linux starts again. In this case, the TUSB320 no
>> longer reports any interrupts in reg09, and the state update does not
>> perform any update as it depends on that interrupt indication.
>>
>> Fix this by turning tusb320_irq_handler() into a thin wrapper around
>> tusb320_state_update_handler(), where the later now contains the bulk
>> of the code of tusb320_irq_handler(), but adds new function parameter
>> "force_update". The "force_update" parameter can be used by the probe
>> function to assure that the state synchronization is always performed,
>> independent of the interrupt indicated in reg09. The interrupt handler
>> tusb320_irq_handler() callback uses force_update=false to avoid state
>> updates on potential spurious interrupts and retain current behavior.
>>
>> Fixes: 06bc4ca115cdd ("extcon: Add driver for TI TUSB320")
>> Signed-off-by: Marek Vasut <marex@denx.de>
>> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
>> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
>> Link: https://lore.kernel.org/r/20221120141509.81012-1-marex@denx.de
>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>
> Is the Fixes: tag here actually wrong? There was a regression report here:
>
> https://lore.kernel.org/all/fd0f2d56-495e-6fdd-d1e8-ff40b558101e@axentia.se/
>
> which this patch fixed. But according to the report, it was a regression
> introduced by Marek's recent addition of typec support. Since that new
The fixes tag is correct here. What is wrong is that this patch does not fix
the above reported regression which was instead fixed by
341fd15e2e18 ("extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered")
However, this patch still fixes a problem so it should be considered for stable.
From only looking at this patch, it looks easy to backport to kernels that do
not have
bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support")
and its followup fix.
But I have of course not tried, so maybe I'm wrong...
Cheers,
Peter
> functionality is not normally wanted in stable, can these three tusb320
> patches simply be dropped?
>
> Marek, Peter, any thoughts?
>
> Kind regards,
> Alvin
>
>> drivers/extcon/extcon-usbc-tusb320.c | 17 ++++++++++++-----
>> 1 file changed, 12 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
>> index edb8c3f997c9..b0f6e16ab0a9 100644
>> --- a/drivers/extcon/extcon-usbc-tusb320.c
>> +++ b/drivers/extcon/extcon-usbc-tusb320.c
>> @@ -313,9 +313,9 @@ static void tusb320_typec_irq_handler(struct tusb320_priv *priv, u8 reg9)
>> typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
>> }
>>
>> -static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
>> +static irqreturn_t tusb320_state_update_handler(struct tusb320_priv *priv,
>> + bool force_update)
>> {
>> - struct tusb320_priv *priv = dev_id;
>> unsigned int reg;
>>
>> if (regmap_read(priv->regmap, TUSB320_REG9, ®)) {
>> @@ -323,7 +323,7 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
>> return IRQ_NONE;
>> }
>>
>> - if (!(reg & TUSB320_REG9_INTERRUPT_STATUS))
>> + if (!force_update && !(reg & TUSB320_REG9_INTERRUPT_STATUS))
>> return IRQ_NONE;
>>
>> tusb320_extcon_irq_handler(priv, reg);
>> @@ -334,6 +334,13 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
>> return IRQ_HANDLED;
>> }
>>
>> +static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
>> +{
>> + struct tusb320_priv *priv = dev_id;
>> +
>> + return tusb320_state_update_handler(priv, false);
>> +}
>> +
>> static const struct regmap_config tusb320_regmap_config = {
>> .reg_bits = 8,
>> .val_bits = 8,
>> @@ -460,7 +467,7 @@ static int tusb320_probe(struct i2c_client *client,
>> return ret;
>>
>> /* update initial state */
>> - tusb320_irq_handler(client->irq, priv);
>> + tusb320_state_update_handler(priv, true);
>>
>> /* Reset chip to its default state */
>> ret = tusb320_reset(priv);
>> @@ -471,7 +478,7 @@ static int tusb320_probe(struct i2c_client *client,
>> * State and polarity might change after a reset, so update
>> * them again and make sure the interrupt status bit is cleared.
>> */
>> - tusb320_irq_handler(client->irq, priv);
>> + tusb320_state_update_handler(priv, true);
>>
>> ret = devm_request_threaded_irq(priv->dev, client->irq, NULL,
>> tusb320_irq_handler,
>> --
>> 2.35.1
>>
>>
>>
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 456/731] extcon: usbc-tusb320: Update state on probe even if no IRQ pending
2022-12-28 21:04 ` Peter Rosin
@ 2022-12-29 0:09 ` Peter Rosin
2022-12-30 9:15 ` Greg Kroah-Hartman
0 siblings, 1 reply; 763+ messages in thread
From: Peter Rosin @ 2022-12-29 0:09 UTC (permalink / raw)
To: Alvin Šipraga, Greg Kroah-Hartman, Marek Vasut
Cc: stable, patches, Heikki Krogerus, Sasha Levin
2022-12-28 at 22:04, Peter Rosin wrote:
> Hi!
>
> 2022-12-28 at 16:45, Alvin Šipraga wrote:
>> On Wed, Dec 28, 2022 at 03:39:23PM +0100, Greg Kroah-Hartman wrote:
>>> From: Marek Vasut <marex@denx.de>
>>>
>>> [ Upstream commit 581c848b610dbf3fe1ed4d85fd53d0743c61faba ]
>>>
>>> Currently this driver triggers extcon and typec state update in its
>>> probe function, to read out current state reported by the chip and
>>> report the correct state to upper layers. This synchronization is
>>> performed correctly, but only in case the chip indicates a pending
>>> interrupt in reg09 register.
>>>
>>> This fails to cover the situation where all interrupts reported by
>>> the chip were already handled by Linux before reboot, then the system
>>> rebooted, and then Linux starts again. In this case, the TUSB320 no
>>> longer reports any interrupts in reg09, and the state update does not
>>> perform any update as it depends on that interrupt indication.
>>>
>>> Fix this by turning tusb320_irq_handler() into a thin wrapper around
>>> tusb320_state_update_handler(), where the later now contains the bulk
>>> of the code of tusb320_irq_handler(), but adds new function parameter
>>> "force_update". The "force_update" parameter can be used by the probe
>>> function to assure that the state synchronization is always performed,
>>> independent of the interrupt indicated in reg09. The interrupt handler
>>> tusb320_irq_handler() callback uses force_update=false to avoid state
>>> updates on potential spurious interrupts and retain current behavior.
>>>
>>> Fixes: 06bc4ca115cdd ("extcon: Add driver for TI TUSB320")
>>> Signed-off-by: Marek Vasut <marex@denx.de>
>>> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
>>> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
>>> Link: https://lore.kernel.org/r/20221120141509.81012-1-marex@denx.de
>>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>>> ---
>>
>> Is the Fixes: tag here actually wrong? There was a regression report here:
>>
>> https://lore.kernel.org/all/fd0f2d56-495e-6fdd-d1e8-ff40b558101e@axentia.se/
>>
>> which this patch fixed. But according to the report, it was a regression
>> introduced by Marek's recent addition of typec support. Since that new
>
> The fixes tag is correct here. What is wrong is that this patch does not fix
> the above reported regression which was instead fixed by
> 341fd15e2e18 ("extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered")
>
> However, this patch still fixes a problem so it should be considered for stable.
>
> From only looking at this patch, it looks easy to backport to kernels that do
> not have
> bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support")
> and its followup fix.
>
> But I have of course not tried, so maybe I'm wrong...
Sorry for the reply to self, but here's a backport for v5.15
Signed-off-by: Peter Rosin <peda@axentia.se>
Cheers,
Peter
diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
index 805af73b4152..1840614631bd 100644
--- a/drivers/extcon/extcon-usbc-tusb320.c
+++ b/drivers/extcon/extcon-usbc-tusb320.c
@@ -62,9 +62,9 @@ static int tusb320_check_signature(struct tusb320_priv *priv)
return 0;
}
-static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
+static irqreturn_t tusb320_state_update_handler(struct tusb320_priv *priv,
+ bool force_update)
{
- struct tusb320_priv *priv = dev_id;
int state, polarity;
unsigned reg;
@@ -73,7 +73,7 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
return IRQ_NONE;
}
- if (!(reg & TUSB320_REG9_INTERRUPT_STATUS))
+ if (!force_update && !(reg & TUSB320_REG9_INTERRUPT_STATUS))
return IRQ_NONE;
state = (reg >> TUSB320_REG9_ATTACHED_STATE_SHIFT) &
@@ -101,6 +101,13 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
+{
+ struct tusb320_priv *priv = dev_id;
+
+ return tusb320_state_update_handler(priv, false);
+}
+
static const struct regmap_config tusb320_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -143,7 +150,7 @@ static int tusb320_extcon_probe(struct i2c_client *client,
EXTCON_PROP_USB_TYPEC_POLARITY);
/* update initial state */
- tusb320_irq_handler(client->irq, priv);
+ tusb320_state_update_handler(priv, true);
ret = devm_request_threaded_irq(priv->dev, client->irq, NULL,
tusb320_irq_handler,
^ permalink raw reply related [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 000/731] 5.15.86-rc1 review
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (732 preceding siblings ...)
2022-12-28 20:42 ` Slade Watkins
@ 2022-12-29 3:42 ` Bagas Sanjaya
2022-12-29 3:50 ` Ron Economos
` (7 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Bagas Sanjaya @ 2022-12-29 3:42 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee, srw,
rwarsow
[-- Attachment #1: Type: text/plain, Size: 539 bytes --]
On Wed, Dec 28, 2022 at 03:31:47PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.86 release.
> There are 731 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
Successfully cross-compiled for arm64 (bcm2711_defconfig, GCC 10.2.0) and
powerpc (ps3_defconfig, GCC 12.2.0).
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
--
An old man doll... just what I always wanted! - Clara
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 000/731] 5.15.86-rc1 review
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (733 preceding siblings ...)
2022-12-29 3:42 ` Bagas Sanjaya
@ 2022-12-29 3:50 ` Ron Economos
2022-12-29 7:38 ` Thierry Reding
` (6 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Ron Economos @ 2022-12-29 3:50 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee, srw,
rwarsow
On 12/28/22 6:31 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.86 release.
> There are 731 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 30 Dec 2022 14:41:39 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.86-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos <re@w6rz.net>
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 000/731] 5.15.86-rc1 review
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (734 preceding siblings ...)
2022-12-29 3:50 ` Ron Economos
@ 2022-12-29 7:38 ` Thierry Reding
2022-12-29 7:43 ` Thierry Reding
` (5 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Thierry Reding @ 2022-12-29 7:38 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Greg Kroah-Hartman, patches, linux-kernel, torvalds, akpm, linux,
shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, linux-tegra
On Wed, 28 Dec 2022 15:31:47 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.86 release.
> There are 731 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 30 Dec 2022 14:41:39 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.86-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v5.15:
11 builds: 11 pass, 0 fail
28 boots: 28 pass, 0 fail
114 tests: 114 pass, 0 fail
Linux version: 5.15.86-rc1-g9c8c39127c59
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Thierry Reding <treding@nvidia.com>
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 000/731] 5.15.86-rc1 review
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (735 preceding siblings ...)
2022-12-29 7:38 ` Thierry Reding
@ 2022-12-29 7:43 ` Thierry Reding
2022-12-29 7:54 ` Thierry Reding
` (4 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Thierry Reding @ 2022-12-29 7:43 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Greg Kroah-Hartman, patches, linux-kernel, torvalds, akpm, linux,
shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, linux-tegra
On Wed, 28 Dec 2022 15:31:47 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.86 release.
> There are 731 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 30 Dec 2022 14:41:39 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.86-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v5.15:
11 builds: 11 pass, 0 fail
28 boots: 28 pass, 0 fail
114 tests: 114 pass, 0 fail
Linux version: 5.15.86-rc1-g87d5d5cae7d9
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Thierry Reding <treding@nvidia.com>
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 000/731] 5.15.86-rc1 review
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (736 preceding siblings ...)
2022-12-29 7:43 ` Thierry Reding
@ 2022-12-29 7:54 ` Thierry Reding
2022-12-29 13:42 ` Guenter Roeck
` (3 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Thierry Reding @ 2022-12-29 7:54 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: Greg Kroah-Hartman, patches, linux-kernel, torvalds, akpm, linux,
shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, linux-tegra
On Wed, 28 Dec 2022 15:31:47 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.86 release.
> There are 731 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 30 Dec 2022 14:41:39 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.86-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v5.15:
11 builds: 11 pass, 0 fail
28 boots: 28 pass, 0 fail
114 tests: 114 pass, 0 fail
Linux version: 5.15.86-rc1-g87d5d5cae7d9
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Thierry Reding <treding@nvidia.com>
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 000/731] 5.15.86-rc1 review
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (737 preceding siblings ...)
2022-12-29 7:54 ` Thierry Reding
@ 2022-12-29 13:42 ` Guenter Roeck
2022-12-29 14:40 ` Pavel Machek
` (2 subsequent siblings)
741 siblings, 0 replies; 763+ messages in thread
From: Guenter Roeck @ 2022-12-29 13:42 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee, srw,
rwarsow
On Wed, Dec 28, 2022 at 03:31:47PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.86 release.
> There are 731 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 30 Dec 2022 14:41:39 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 160 pass: 158 fail: 2
Failed builds:
arm:allmodconfig
arm64:allmodconfig
Qemu test results:
total: 489 pass: 489 fail: 0
Build errors as reported.
Guenter
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 000/731] 5.15.86-rc1 review
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (738 preceding siblings ...)
2022-12-29 13:42 ` Guenter Roeck
@ 2022-12-29 14:40 ` Pavel Machek
2022-12-29 16:56 ` Nathan Chancellor
2022-12-29 23:26 ` Shuah Khan
2022-12-30 7:28 ` Naresh Kamboju
741 siblings, 1 reply; 763+ messages in thread
From: Pavel Machek @ 2022-12-29 14:40 UTC (permalink / raw)
To: Greg Kroah-Hartman, nathan, andrii, dave.stevenson
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow
[-- Attachment #1: Type: text/plain, Size: 1415 bytes --]
Hi!
> This is the start of the stable review cycle for the 5.15.86 release.
> There are 731 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
These are just kCFI annotations. I don't believe we need them in 5.10
(and 5.15).
> Nathan Chancellor <nathan@kernel.org>
> net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
> Nathan Chancellor <nathan@kernel.org>
> drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
> Nathan Chancellor <nathan@kernel.org>
> drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
These are just preparation for "bpf: allow precision tracking for
programs with subprogs", but that is not queued here. We should not
need them.
> Andrii Nakryiko <andrii@kernel.org>
> bpf: propagate precision in ALU/ALU64 operations
> Andrii Nakryiko <andrii@kernel.org>
> bpf: propagate precision across all frames, not just the last one
AFAICT, DRM_FORMAT_P030 is not used anywhere in 5.15, so we should not
need this one.
> Dave Stevenson <dave.stevenson@raspberrypi.com>
> drm/fourcc: Add packed 10bit YUV 4:2:0 format
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 152/731] powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G
2022-12-28 14:34 ` [PATCH 5.15 152/731] powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G Greg Kroah-Hartman
@ 2022-12-29 16:00 ` Sean Anderson
2022-12-30 9:16 ` Greg Kroah-Hartman
0 siblings, 1 reply; 763+ messages in thread
From: Sean Anderson @ 2022-12-29 16:00 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable; +Cc: patches, David S. Miller, Sasha Levin
Hi Greg,
On 12/28/22 09:34, Greg Kroah-Hartman wrote:
> From: Sean Anderson <sean.anderson@seco.com>
>
> [ Upstream commit 36926a7d70c2d462fca1ed85bfee000d17fd8662 ]
>
> On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC dtsi
> fragments, and mark the QMAN ports as 10G.
>
> Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)")
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
This shouldn't be backported without [1].
That said, this fix isn't necessary for kernels which don't use phylink for this ethernet driver.
--Sean
[1] https://lore.kernel.org/netdev/20221216172937.2960054-1-sean.anderson@seco.com/
> ---
> .../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi | 44 +++++++++++++++++++
> .../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi | 44 +++++++++++++++++++
> arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 4 +-
> 3 files changed, 90 insertions(+), 2 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
>
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
> new file mode 100644
> index 000000000000..437dab3fc017
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
> +/*
> + * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset 0x400000 ]
> + *
> + * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
> + * Copyright 2012 - 2015 Freescale Semiconductor Inc.
> + */
> +
> +fman@400000 {
> + fman0_rx_0x08: port@88000 {
> + cell-index = <0x8>;
> + compatible = "fsl,fman-v3-port-rx";
> + reg = <0x88000 0x1000>;
> + fsl,fman-10g-port;
> + };
> +
> + fman0_tx_0x28: port@a8000 {
> + cell-index = <0x28>;
> + compatible = "fsl,fman-v3-port-tx";
> + reg = <0xa8000 0x1000>;
> + fsl,fman-10g-port;
> + };
> +
> + ethernet@e0000 {
> + cell-index = <0>;
> + compatible = "fsl,fman-memac";
> + reg = <0xe0000 0x1000>;
> + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
> + ptp-timer = <&ptp_timer0>;
> + pcsphy-handle = <&pcsphy0>;
> + };
> +
> + mdio@e1000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
> + reg = <0xe1000 0x1000>;
> + fsl,erratum-a011043; /* must ignore read errors */
> +
> + pcsphy0: ethernet-phy@0 {
> + reg = <0x0>;
> + };
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
> new file mode 100644
> index 000000000000..ad116b17850a
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
> +/*
> + * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset 0x400000 ]
> + *
> + * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
> + * Copyright 2012 - 2015 Freescale Semiconductor Inc.
> + */
> +
> +fman@400000 {
> + fman0_rx_0x09: port@89000 {
> + cell-index = <0x9>;
> + compatible = "fsl,fman-v3-port-rx";
> + reg = <0x89000 0x1000>;
> + fsl,fman-10g-port;
> + };
> +
> + fman0_tx_0x29: port@a9000 {
> + cell-index = <0x29>;
> + compatible = "fsl,fman-v3-port-tx";
> + reg = <0xa9000 0x1000>;
> + fsl,fman-10g-port;
> + };
> +
> + ethernet@e2000 {
> + cell-index = <1>;
> + compatible = "fsl,fman-memac";
> + reg = <0xe2000 0x1000>;
> + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
> + ptp-timer = <&ptp_timer0>;
> + pcsphy-handle = <&pcsphy1>;
> + };
> +
> + mdio@e3000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
> + reg = <0xe3000 0x1000>;
> + fsl,erratum-a011043; /* must ignore read errors */
> +
> + pcsphy1: ethernet-phy@0 {
> + reg = <0x0>;
> + };
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> index ecbb447920bc..74e17e134387 100644
> --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> @@ -609,8 +609,8 @@ usb1: usb@211000 {
> /include/ "qoriq-bman1.dtsi"
>
> /include/ "qoriq-fman3-0.dtsi"
> -/include/ "qoriq-fman3-0-1g-0.dtsi"
> -/include/ "qoriq-fman3-0-1g-1.dtsi"
> +/include/ "qoriq-fman3-0-10g-2.dtsi"
> +/include/ "qoriq-fman3-0-10g-3.dtsi"
> /include/ "qoriq-fman3-0-1g-2.dtsi"
> /include/ "qoriq-fman3-0-1g-3.dtsi"
> /include/ "qoriq-fman3-0-1g-4.dtsi"
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 000/731] 5.15.86-rc1 review
2022-12-29 14:40 ` Pavel Machek
@ 2022-12-29 16:56 ` Nathan Chancellor
0 siblings, 0 replies; 763+ messages in thread
From: Nathan Chancellor @ 2022-12-29 16:56 UTC (permalink / raw)
To: Pavel Machek
Cc: Greg Kroah-Hartman, andrii, dave.stevenson, stable, patches,
linux-kernel, torvalds, akpm, linux, shuah, patches, lkft-triage,
jonathanh, f.fainelli, sudipm.mukherjee, srw, rwarsow
On Thu, Dec 29, 2022 at 03:40:51PM +0100, Pavel Machek wrote:
> Hi!
>
> > This is the start of the stable review cycle for the 5.15.86 release.
> > There are 731 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
>
> These are just kCFI annotations. I don't believe we need them in 5.10
> (and 5.15).
The original CFI implementation exists in 5.15 and the problem described
in those patches should still trigger with that implementation just like
kCFI, so they should likely still go to 5.15. However, they were
AUTOSEL'd and we have not had any reports of problems that are solved
with these patches (although that is likely because nobody who is using
this hardware has tried running a CONFIG_CFI_CLANG kernel), so I do not
really care if they are applied or not.
> > Nathan Chancellor <nathan@kernel.org>
> > net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
> > Nathan Chancellor <nathan@kernel.org>
> > drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
> > Nathan Chancellor <nathan@kernel.org>
> > drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
Cheers,
Nathan
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 000/731] 5.15.86-rc1 review
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (739 preceding siblings ...)
2022-12-29 14:40 ` Pavel Machek
@ 2022-12-29 23:26 ` Shuah Khan
2022-12-30 7:28 ` Naresh Kamboju
741 siblings, 0 replies; 763+ messages in thread
From: Shuah Khan @ 2022-12-29 23:26 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee, srw,
rwarsow, Shuah Khan
On 12/28/22 07:31, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.86 release.
> There are 731 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 30 Dec 2022 14:41:39 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.86-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 000/731] 5.15.86-rc1 review
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
` (740 preceding siblings ...)
2022-12-29 23:26 ` Shuah Khan
@ 2022-12-30 7:28 ` Naresh Kamboju
741 siblings, 0 replies; 763+ messages in thread
From: Naresh Kamboju @ 2022-12-30 7:28 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow
On Wed, 28 Dec 2022 at 20:14, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.15.86 release.
> There are 731 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 30 Dec 2022 14:41:39 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.86-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
NOTE:
Daniel Díaz reported allmodconfig failures [1]
[1] https://lore.kernel.org/stable/0328eb25-f711-d6ca-28f4-60601b6e0bfe@linaro.org/
## Build
* kernel: 5.15.86-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.15.y
* git commit: 87d5d5cae7d93d584c504a91241ccf7a09217bab
* git describe: v5.15.85-732-g87d5d5cae7d9
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.85-732-g87d5d5cae7d9
## Test Regressions (compared to v5.15.84-18-gbef75c6188c7)
## Metric Regressions (compared to v5.15.84-18-gbef75c6188c7)
## Test Fixes (compared to v5.15.84-18-gbef75c6188c7)
## Metric Fixes (compared to v5.15.84-18-gbef75c6188c7)
## Test result summary
total: 148474, pass: 130464, fail: 2813, skip: 14903, xfail: 294
## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 151 total, 146 passed, 5 failed
* arm64: 49 total, 43 passed, 6 failed
* i386: 39 total, 35 passed, 4 failed
* mips: 31 total, 29 passed, 2 failed
* parisc: 8 total, 8 passed, 0 failed
* powerpc: 34 total, 32 passed, 2 failed
* riscv: 14 total, 14 passed, 0 failed
* s390: 16 total, 14 passed, 2 failed
* sh: 14 total, 12 passed, 2 failed
* sparc: 8 total, 8 passed, 0 failed
* x86_64: 42 total, 40 passed, 2 failed
## Test suites summary
* boot
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* perf
* rcutorture
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 456/731] extcon: usbc-tusb320: Update state on probe even if no IRQ pending
2022-12-29 0:09 ` Peter Rosin
@ 2022-12-30 9:15 ` Greg Kroah-Hartman
0 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-30 9:15 UTC (permalink / raw)
To: Peter Rosin
Cc: Alvin Šipraga, Marek Vasut, stable, patches,
Heikki Krogerus, Sasha Levin
On Thu, Dec 29, 2022 at 01:09:13AM +0100, Peter Rosin wrote:
> 2022-12-28 at 22:04, Peter Rosin wrote:
> > Hi!
> >
> > 2022-12-28 at 16:45, Alvin Šipraga wrote:
> >> On Wed, Dec 28, 2022 at 03:39:23PM +0100, Greg Kroah-Hartman wrote:
> >>> From: Marek Vasut <marex@denx.de>
> >>>
> >>> [ Upstream commit 581c848b610dbf3fe1ed4d85fd53d0743c61faba ]
> >>>
> >>> Currently this driver triggers extcon and typec state update in its
> >>> probe function, to read out current state reported by the chip and
> >>> report the correct state to upper layers. This synchronization is
> >>> performed correctly, but only in case the chip indicates a pending
> >>> interrupt in reg09 register.
> >>>
> >>> This fails to cover the situation where all interrupts reported by
> >>> the chip were already handled by Linux before reboot, then the system
> >>> rebooted, and then Linux starts again. In this case, the TUSB320 no
> >>> longer reports any interrupts in reg09, and the state update does not
> >>> perform any update as it depends on that interrupt indication.
> >>>
> >>> Fix this by turning tusb320_irq_handler() into a thin wrapper around
> >>> tusb320_state_update_handler(), where the later now contains the bulk
> >>> of the code of tusb320_irq_handler(), but adds new function parameter
> >>> "force_update". The "force_update" parameter can be used by the probe
> >>> function to assure that the state synchronization is always performed,
> >>> independent of the interrupt indicated in reg09. The interrupt handler
> >>> tusb320_irq_handler() callback uses force_update=false to avoid state
> >>> updates on potential spurious interrupts and retain current behavior.
> >>>
> >>> Fixes: 06bc4ca115cdd ("extcon: Add driver for TI TUSB320")
> >>> Signed-off-by: Marek Vasut <marex@denx.de>
> >>> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
> >>> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> >>> Link: https://lore.kernel.org/r/20221120141509.81012-1-marex@denx.de
> >>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >>> Signed-off-by: Sasha Levin <sashal@kernel.org>
> >>> ---
> >>
> >> Is the Fixes: tag here actually wrong? There was a regression report here:
> >>
> >> https://lore.kernel.org/all/fd0f2d56-495e-6fdd-d1e8-ff40b558101e@axentia.se/
> >>
> >> which this patch fixed. But according to the report, it was a regression
> >> introduced by Marek's recent addition of typec support. Since that new
> >
> > The fixes tag is correct here. What is wrong is that this patch does not fix
> > the above reported regression which was instead fixed by
> > 341fd15e2e18 ("extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered")
> >
> > However, this patch still fixes a problem so it should be considered for stable.
> >
> > From only looking at this patch, it looks easy to backport to kernels that do
> > not have
> > bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support")
> > and its followup fix.
> >
> > But I have of course not tried, so maybe I'm wrong...
>
> Sorry for the reply to self, but here's a backport for v5.15
>
> Signed-off-by: Peter Rosin <peda@axentia.se>
Can you send this as a new thread with the proper header and subject
line so that we can apply it correctly?
Right now it's burried down in this thread...
thanks,
greg k-h
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 152/731] powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G
2022-12-29 16:00 ` Sean Anderson
@ 2022-12-30 9:16 ` Greg Kroah-Hartman
0 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-30 9:16 UTC (permalink / raw)
To: Sean Anderson; +Cc: stable, patches, David S. Miller, Sasha Levin
On Thu, Dec 29, 2022 at 11:00:19AM -0500, Sean Anderson wrote:
> Hi Greg,
>
> On 12/28/22 09:34, Greg Kroah-Hartman wrote:
> > From: Sean Anderson <sean.anderson@seco.com>
> >
> > [ Upstream commit 36926a7d70c2d462fca1ed85bfee000d17fd8662 ]
> >
> > On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC dtsi
> > fragments, and mark the QMAN ports as 10G.
> >
> > Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)")
> > Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> > Signed-off-by: David S. Miller <davem@davemloft.net>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
>
> This shouldn't be backported without [1].
Thanks, I'll drop this from everywhere.
greg k-h
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 557/731] phy: qcom-qmp: create copies of QMP PHY driver
2022-12-28 16:49 ` Vinod Koul
@ 2022-12-31 11:56 ` Greg Kroah-Hartman
0 siblings, 0 replies; 763+ messages in thread
From: Greg Kroah-Hartman @ 2022-12-31 11:56 UTC (permalink / raw)
To: Vinod Koul
Cc: stable, patches, Bjorn Andersson, Dmitry Baryshkov, Sasha Levin
On Wed, Dec 28, 2022 at 10:19:05PM +0530, Vinod Koul wrote:
> On 28-12-22, 15:41, Greg Kroah-Hartman wrote:
> > From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> >
> > [ Upstream commit 94a407cc17a445ddb3f7315cee0b0916d35d177c ]
> >
> > In order to split and cleanup the single monstrous QMP PHY driver,
> > create blind copies of the current file. They will be used for:
> > - PCIe (and a separate msm8996 PCIe PHY driver)
> > - UFS
> > - USB
> > - Combo DP + USB
>
> Greg,
>
> Please drop this. This is a full driver rework and code reorg thus not
> suitable for stable
Now dropped, something went wrong with Sasha's scripts in that the
"dep-of" is not in the tree here so this isn't needed either.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 481/731] usb: gadget: f_hid: fix f_hidg lifetime vs cdev
2022-12-28 14:39 ` [PATCH 5.15 481/731] usb: gadget: f_hid: fix f_hidg lifetime vs cdev Greg Kroah-Hartman
@ 2023-01-05 12:18 ` Lee Jones
2023-01-05 12:28 ` Greg Kroah-Hartman
0 siblings, 1 reply; 763+ messages in thread
From: Lee Jones @ 2023-01-05 12:18 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, Andrzej Pietrasiewicz, John Keeping, Sasha Levin
On Wed, 28 Dec 2022, Greg Kroah-Hartman wrote:
> From: John Keeping <john@metanate.com>
>
> [ Upstream commit 89ff3dfac604614287ad5aad9370c3f984ea3f4b ]
>
> The embedded struct cdev does not have its lifetime correctly tied to
> the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN
> is held open while the gadget is deleted.
>
> This can readily be replicated with libusbgx's example programs (for
> conciseness - operating directly via configfs is equivalent):
>
> gadget-hid
> exec 3<> /dev/hidg0
> gadget-vid-pid-remove
> exec 3<&-
>
> Pull the existing device up in to struct f_hidg and make use of the
> cdev_device_{add,del}() helpers. This changes the lifetime of the
> device object to match struct f_hidg, but note that it is still added
> and deleted at the same time.
>
> Fixes: 71adf1189469 ("USB: gadget: add HID gadget driver")
> Tested-by: Lee Jones <lee@kernel.org>
> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
> Reviewed-by: Lee Jones <lee@kernel.org>
> Signed-off-by: John Keeping <john@metanate.com>
> Link: https://lore.kernel.org/r/20221122123523.3068034-2-john@metanate.com
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
> drivers/usb/gadget/function/f_hid.c | 52 ++++++++++++++++-------------
> 1 file changed, 28 insertions(+), 24 deletions(-)
Dear Stable,
Would you be kind enough to take this back as far back as linux.4.14.y
please? There is a trivial fix-up required for kernels older than
v5.15, but it's the same fix-up back through v4.14.
Thanks.
---
Lee Jones [李琼斯]
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 481/731] usb: gadget: f_hid: fix f_hidg lifetime vs cdev
2023-01-05 12:18 ` Lee Jones
@ 2023-01-05 12:28 ` Greg Kroah-Hartman
2023-01-05 14:08 ` Lee Jones
0 siblings, 1 reply; 763+ messages in thread
From: Greg Kroah-Hartman @ 2023-01-05 12:28 UTC (permalink / raw)
To: Lee Jones
Cc: stable, patches, Andrzej Pietrasiewicz, John Keeping, Sasha Levin
On Thu, Jan 05, 2023 at 12:18:18PM +0000, Lee Jones wrote:
> On Wed, 28 Dec 2022, Greg Kroah-Hartman wrote:
>
> > From: John Keeping <john@metanate.com>
> >
> > [ Upstream commit 89ff3dfac604614287ad5aad9370c3f984ea3f4b ]
> >
> > The embedded struct cdev does not have its lifetime correctly tied to
> > the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN
> > is held open while the gadget is deleted.
> >
> > This can readily be replicated with libusbgx's example programs (for
> > conciseness - operating directly via configfs is equivalent):
> >
> > gadget-hid
> > exec 3<> /dev/hidg0
> > gadget-vid-pid-remove
> > exec 3<&-
> >
> > Pull the existing device up in to struct f_hidg and make use of the
> > cdev_device_{add,del}() helpers. This changes the lifetime of the
> > device object to match struct f_hidg, but note that it is still added
> > and deleted at the same time.
> >
> > Fixes: 71adf1189469 ("USB: gadget: add HID gadget driver")
> > Tested-by: Lee Jones <lee@kernel.org>
> > Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
> > Reviewed-by: Lee Jones <lee@kernel.org>
> > Signed-off-by: John Keeping <john@metanate.com>
> > Link: https://lore.kernel.org/r/20221122123523.3068034-2-john@metanate.com
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> > ---
> > drivers/usb/gadget/function/f_hid.c | 52 ++++++++++++++++-------------
> > 1 file changed, 28 insertions(+), 24 deletions(-)
>
> Dear Stable,
>
> Would you be kind enough to take this back as far back as linux.4.14.y
> please? There is a trivial fix-up required for kernels older than
> v5.15, but it's the same fix-up back through v4.14.
This is already in the queue for 5.10, 5.4, and 4.19, but for some
reason not in 4.14. Can you verify that the 4.19 version works there
too?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 763+ messages in thread
* Re: [PATCH 5.15 481/731] usb: gadget: f_hid: fix f_hidg lifetime vs cdev
2023-01-05 12:28 ` Greg Kroah-Hartman
@ 2023-01-05 14:08 ` Lee Jones
0 siblings, 0 replies; 763+ messages in thread
From: Lee Jones @ 2023-01-05 14:08 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, Andrzej Pietrasiewicz, John Keeping, Sasha Levin
On Thu, 05 Jan 2023, Greg Kroah-Hartman wrote:
> On Thu, Jan 05, 2023 at 12:18:18PM +0000, Lee Jones wrote:
> > On Wed, 28 Dec 2022, Greg Kroah-Hartman wrote:
> >
> > > From: John Keeping <john@metanate.com>
> > >
> > > [ Upstream commit 89ff3dfac604614287ad5aad9370c3f984ea3f4b ]
> > >
> > > The embedded struct cdev does not have its lifetime correctly tied to
> > > the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN
> > > is held open while the gadget is deleted.
> > >
> > > This can readily be replicated with libusbgx's example programs (for
> > > conciseness - operating directly via configfs is equivalent):
> > >
> > > gadget-hid
> > > exec 3<> /dev/hidg0
> > > gadget-vid-pid-remove
> > > exec 3<&-
> > >
> > > Pull the existing device up in to struct f_hidg and make use of the
> > > cdev_device_{add,del}() helpers. This changes the lifetime of the
> > > device object to match struct f_hidg, but note that it is still added
> > > and deleted at the same time.
> > >
> > > Fixes: 71adf1189469 ("USB: gadget: add HID gadget driver")
> > > Tested-by: Lee Jones <lee@kernel.org>
> > > Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
> > > Reviewed-by: Lee Jones <lee@kernel.org>
> > > Signed-off-by: John Keeping <john@metanate.com>
> > > Link: https://lore.kernel.org/r/20221122123523.3068034-2-john@metanate.com
> > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > Signed-off-by: Sasha Levin <sashal@kernel.org>
> > > ---
> > > drivers/usb/gadget/function/f_hid.c | 52 ++++++++++++++++-------------
> > > 1 file changed, 28 insertions(+), 24 deletions(-)
> >
> > Dear Stable,
> >
> > Would you be kind enough to take this back as far back as linux.4.14.y
> > please? There is a trivial fix-up required for kernels older than
> > v5.15, but it's the same fix-up back through v4.14.
>
> This is already in the queue for 5.10, 5.4, and 4.19, but for some
> reason not in 4.14. Can you verify that the 4.19 version works there
> too?
That works. v4.19 isn't required. Thanks.
--
Lee Jones [李琼斯]
^ permalink raw reply [flat|nested] 763+ messages in thread
end of thread, other threads:[~2023-01-05 14:08 UTC | newest]
Thread overview: 763+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-28 14:31 [PATCH 5.15 000/731] 5.15.86-rc1 review Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 001/731] drm/amd/display: Manually adjust strobe for DCN303 Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 002/731] usb: musb: remove extra check in musb_gadget_vbus_draw Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 003/731] arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 004/731] arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 005/731] arm64: dts: qcom: msm8996: Add MSM8996 Pro support Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 006/731] arm64: dts: qcom: msm8996: fix supported-hw in cpufreq OPP tables Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 007/731] arm64: dts: qcom: msm8996: fix GPU OPP table Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 008/731] ARM: dts: qcom: apq8064: fix coresight compatible Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 009/731] arm64: dts: qcom: sdm630: fix UART1 pin bias Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 010/731] arm64: dts: qcom: sdm845-cheza: fix AP suspend " Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 011/731] arm64: dts: qcom: msm8916: Drop MSS fallback compatible Greg Kroah-Hartman
2022-12-28 14:31 ` [PATCH 5.15 012/731] objtool, kcsan: Add volatile read/write instrumentation to whitelist Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 013/731] ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96 Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 014/731] ARM: dts: stm32: Fix AV96 WLAN regulator gpio property Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 015/731] drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 016/731] arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 017/731] arm64: dts: qcom: sm8250: correct LPASS pin pull down Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 018/731] soc: qcom: llcc: make irq truly optional Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 019/731] arm64: dts: qcom: Correct QMP PHY child node name Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 020/731] arm64: dts: qcom: sm8150: fix UFS PHY registers Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 021/731] arm64: dts: qcom: sm8250: " Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 022/731] arm64: dts: qcom: sm8350: " Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 023/731] arm64: dts: qcom: sm8250: drop bogus DP PHY clock Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 024/731] soc: qcom: apr: make code more reuseable Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 025/731] soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 026/731] arm64: dts: qcom: sm6125: fix SDHCI CQE reg names Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 027/731] arm: dts: spear600: Fix clcd interrupt Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 028/731] soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 029/731] soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 030/731] soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 031/731] arm64: Treat ESR_ELx as a 64-bit register Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 032/731] arm64: mm: kfence: only handle translation faults Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 033/731] perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init() Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 034/731] perf/arm_dmc620: Fix hotplug callback leak in dmc620_pmu_init() Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 035/731] perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init() Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 036/731] arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 037/731] arm64: dts: ti: k3-j721e-main: " Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 038/731] ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 039/731] arm64: dts: mt6779: Fix devicetree build warnings Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 040/731] arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 041/731] arm64: dts: mt2712e: Fix unit address for pinctrl node Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 042/731] arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 043/731] arm64: dts: mt2712-evb: Fix usb vbus " Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 044/731] arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 045/731] arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 046/731] ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 047/731] ARM: dts: armada-370: " Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 048/731] ARM: dts: armada-xp: " Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 049/731] ARM: dts: armada-375: " Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 050/731] ARM: dts: armada-38x: " Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 051/731] ARM: dts: armada-39x: " Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 052/731] ARM: dts: turris-omnia: Add ethernet aliases Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 053/731] ARM: dts: turris-omnia: Add switch port 6 node Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 054/731] ARM: dts: armada-38x: Fix compatible string for gpios Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 055/731] ARM: dts: armada-39x: " Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 056/731] arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 057/731] seccomp: Move copy_seccomp() to no failure path Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 058/731] pstore/ram: Fix error return code in ramoops_probe() Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 059/731] ARM: mmp: fix timer_read delay Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 060/731] pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 061/731] tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init() Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 062/731] tpm/tpm_crb: Fix error message in __crb_relinquish_locality() Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 063/731] ovl: store lower path in ovl_inode Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 064/731] ovl: use ovl_copy_{real,upper}attr() wrappers Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 065/731] ovl: remove privs in ovl_copyfile() Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 066/731] ovl: remove privs in ovl_fallocate() Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 067/731] sched/fair: Cleanup task_util and capacity type Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 068/731] sched/uclamp: Fix relationship between uclamp and migration margin Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 069/731] sched/uclamp: Make task_fits_capacity() use util_fits_cpu() Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 070/731] sched/uclamp: Make select_idle_capacity() " Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 071/731] sched/fair: Removed useless update of p->recent_used_cpu Greg Kroah-Hartman
2022-12-28 14:32 ` [PATCH 5.15 072/731] sched/core: Introduce sched_asym_cpucap_active() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 073/731] sched/uclamp: Make asym_fits_capacity() use util_fits_cpu() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 074/731] cpuidle: dt: Return the correct numbers of parsed idle states Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 075/731] alpha: fix TIF_NOTIFY_SIGNAL handling Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 076/731] alpha: fix syscall entry in !AUDUT_SYSCALL case Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 077/731] x86/sgx: Reduce delay and interference of enclave release Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 078/731] PM: hibernate: Fix mistake in kerneldoc comment Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 079/731] fs: dont audit the capability check in simple_xattr_list() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 080/731] cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 081/731] selftests/ftrace: event_triggers: wait longer for test_event_enable Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 082/731] perf: Fix possible memleak in pmu_dev_alloc() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 083/731] lib/debugobjects: fix stat count and optimize debug_objects_mem_init Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 084/731] platform/x86: huawei-wmi: fix return value calculation Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 085/731] timerqueue: Use rb_entry_safe() in timerqueue_getnext() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 086/731] proc: fixup uptime selftest Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 087/731] lib/fonts: fix undefined behavior in bit shift for get_default_font Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 088/731] ocfs2: fix memory leak in ocfs2_stack_glue_init() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 089/731] MIPS: vpe-mt: fix possible memory leak while module exiting Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 090/731] MIPS: vpe-cmp: " Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 091/731] selftests/efivarfs: Add checking of the test return value Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 092/731] PNP: fix name memory leak in pnp_alloc_dev() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 093/731] perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 094/731] perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 095/731] perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 096/731] perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 097/731] platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 098/731] thermal: core: fix some possible name leaks in error paths Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 099/731] irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 100/731] irqchip/wpcm450: Fix memory leak in wpcm450_aic_of_init() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 101/731] EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 102/731] SUNRPC: Return true/false (not 1/0) from bool functions Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 103/731] NFSD: Finish converting the NFSv2 GETACL result encoder Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 104/731] nfsd: dont call nfsd_file_put from client states seqfile display Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 105/731] genirq/irqdesc: Dont try to remove non-existing sysfs files Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 106/731] cpufreq: amd_freq_sensitivity: Add missing pci_dev_put() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 107/731] libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 108/731] lib/notifier-error-inject: fix error when writing -errno to debugfs file Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 109/731] debugfs: fix error when writing negative value to atomic_t " Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 110/731] rapidio: fix possible name leaks when rio_add_device() fails Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 111/731] rapidio: rio: fix possible name leak in rio_register_mport() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 112/731] clocksource/drivers/sh_cmt: Access registers according to spec Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 113/731] mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 114/731] mips: ralink: mt7621: soc queries and tests as functions Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 115/731] mips: ralink: mt7621: do not use kzalloc too early Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 116/731] futex: Move to kernel/futex/ Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 117/731] futex: Resend potentially swallowed owner death notification Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 118/731] cpu/hotplug: Make target_store() a nop when target == state Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 119/731] cpu/hotplug: Do not bail-out in DYING/STARTING sections Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 120/731] clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 121/731] ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 122/731] uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 123/731] x86/xen: Fix memory leak in xen_smp_intr_init{_pv}() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 124/731] x86/xen: Fix memory leak in xen_init_lock_cpu() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 125/731] xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 126/731] PM: runtime: Do not call __rpm_callback() from rpm_idle() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 127/731] platform/chrome: cros_ec_typec: Cleanup switch handle return paths Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 128/731] platform/chrome: cros_ec_typec: zero out stale pointers Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 129/731] platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 130/731] platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register() Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 131/731] MIPS: BCM63xx: Add check for NULL for clk in clk_enable Greg Kroah-Hartman
2022-12-28 14:33 ` [PATCH 5.15 132/731] MIPS: OCTEON: warn only once if deprecated link status is being used Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 133/731] lockd: set other missing fields when unlocking files Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 134/731] fs: sysv: Fix sysv_nblocks() returns wrong value Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 135/731] rapidio: fix possible UAF when kfifo_alloc() fails Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 136/731] eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 137/731] relay: fix type mismatch when allocating memory in relay_create_buf() Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 138/731] hfs: Fix OOB Write in hfs_asc2mac Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 139/731] rapidio: devices: fix missing put_device in mport_cdev_open Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 140/731] platform/mellanox: mlxbf-pmc: Fix event typo Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 141/731] wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs() Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 142/731] wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb() Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 143/731] wifi: rtl8xxxu: Fix reading the vendor of combo chips Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 144/731] drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 145/731] libbpf: Fix use-after-free in btf_dump_name_dups Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 146/731] libbpf: Fix null-pointer dereference in find_prog_by_sec_insn() Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 147/731] ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 148/731] ata: add/use ata_taskfile::{error|status} fields Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 149/731] ata: libata: fix NCQ autosense logic Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 150/731] ipmi: kcs: Poll OBF briefly to reduce OBE latency Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 151/731] drm/amdgpu/powerplay/psm: Fix memory leak in power state init Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 152/731] powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G Greg Kroah-Hartman
2022-12-29 16:00 ` Sean Anderson
2022-12-30 9:16 ` Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 153/731] media: v4l2-ctrls: Fix off-by-one error in integer menu control check Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 154/731] media: coda: jpeg: Add check for kmalloc Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 155/731] media: adv748x: afe: Select input port when initializing AFE Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 156/731] media: i2c: ad5820: Fix error path Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 157/731] venus: pm_helpers: Fix error check in vcodec_domains_get() Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 158/731] soreuseport: Fix socket selection for SO_INCOMING_CPU Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 159/731] media: exynos4-is: dont rely on the v4l2_async_subdev internals Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 160/731] libbpf: Btf dedup identical struct test needs check for nested structs/arrays Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 161/731] can: kvaser_usb: do not increase tx statistics when sending error message frames Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 162/731] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 163/731] can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 164/731] can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 165/731] can: kvaser_usb_leaf: Set Warning state even without bus errors Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 166/731] can: kvaser_usb: make use of units.h in assignment of frequency Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 167/731] can: kvaser_usb_leaf: Fix improved state not being reported Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 168/731] can: kvaser_usb_leaf: Fix wrong CAN state after stopping Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 169/731] can: kvaser_usb_leaf: Fix bogus restart events Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 170/731] can: kvaser_usb: Add struct kvaser_usb_busparams Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 171/731] can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 172/731] drm/rockchip: lvds: fix PM usage counter unbalance in poweron Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 173/731] clk: renesas: r9a06g032: Repair grave increment error Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 174/731] spi: Update reference to struct spi_controller Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 175/731] drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 176/731] ima: Handle -ESTALE returned by ima_filter_rule_match() Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 177/731] drm/msm/hdmi: drop unused GPIO support Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 178/731] drm/msm/hdmi: use devres helper for runtime PM management Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 179/731] bpf: Fix slot type check in check_stack_write_var_off Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 180/731] media: vivid: fix compose size exceed boundary Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 181/731] media: platform: exynos4-is: fix return value check in fimc_md_probe() Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 182/731] bpf: propagate precision in ALU/ALU64 operations Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 183/731] bpf: Check the other end of slot_type for STACK_SPILL Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 184/731] bpf: propagate precision across all frames, not just the last one Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 185/731] clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 186/731] mtd: Fix device name leak when register device failed in add_mtd_device() Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 187/731] Input: joystick - fix Kconfig warning for JOYSTICK_ADC Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 188/731] wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 189/731] media: camss: Clean up received buffers on failed start of streaming Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 190/731] net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write() Greg Kroah-Hartman
2022-12-28 19:44 ` patchwork-bot+netdevbpf
2022-12-28 14:34 ` [PATCH 5.15 191/731] rxrpc: Fix ack.bufferSize to be 0 when generating an ack Greg Kroah-Hartman
2022-12-28 14:34 ` [PATCH 5.15 192/731] bfq: fix waker_bfqq inconsistency crash Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 193/731] drm/radeon: Add the missed acpi_put_table() to fix memory leak Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 194/731] drm/mediatek: Modify dpi power on/off sequence Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 195/731] ASoC: pxa: fix null-pointer dereference in filter() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 196/731] libbpf: Fix uninitialized warning in btf_dump_dump_type_data Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 197/731] nvmet: only allocate a single slab for bvecs Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 198/731] regulator: core: fix unbalanced of node refcount in regulator_dev_lookup() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 199/731] amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 200/731] nvme: return err on nvme_init_non_mdts_limits fail Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 201/731] regulator: qcom-rpmh: Fix PMR735a S3 regulator spec Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 202/731] drm/fourcc: Add packed 10bit YUV 4:2:0 format Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 203/731] drm/fourcc: Fix vsub/hsub for Q410 and Q401 Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 204/731] integrity: Fix memory leakage in keyring allocation error path Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 205/731] ima: Fix misuse of dereference of pointer in template_desc_init_fields() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 206/731] block: clear ->slave_dir when dropping the main slave_dir reference Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 207/731] wifi: ath10k: Fix return value in ath10k_pci_init() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 208/731] drm/msm/a6xx: Fix speed-bin detection vs probe-defer Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 209/731] mtd: lpddr2_nvm: Fix possible null-ptr-deref Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 210/731] Input: elants_i2c - properly handle the reset GPIO when power is off Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 211/731] media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 212/731] media: solo6x10: fix possible memory leak in solo_sysfs_init() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 213/731] media: platform: exynos4-is: Fix error handling in fimc_md_init() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 214/731] media: videobuf-dma-contig: use dma_mmap_coherent Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 215/731] inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 216/731] mtd: spi-nor: hide jedec_id sysfs attribute if not present Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 217/731] mtd: spi-nor: Fix the number of bytes for the dummy cycles Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 218/731] bpf: Move skb->len == 0 checks into __bpf_redirect Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 219/731] HID: hid-sensor-custom: set fixed size for custom attributes Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 220/731] pinctrl: k210: call of_node_put() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 221/731] ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 222/731] ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 223/731] regulator: core: use kfree_const() to free space conditionally Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 224/731] clk: rockchip: Fix memory leak in rockchip_clk_register_pll() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 225/731] drm/amdgpu: fix pci device refcount leak Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 226/731] bonding: fix link recovery in mode 2 when updelay is nonzero Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 227/731] mtd: maps: pxa2xx-flash: fix memory leak in probe Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 228/731] drbd: remove call to memset before free device/resource/connection Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 229/731] drbd: destroy workqueue when drbd device was freed Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 230/731] ASoC: qcom: Add checks for devm_kcalloc Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 231/731] media: vimc: Fix wrong function called when vimc_init() fails Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 232/731] media: imon: fix a race condition in send_packet() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 233/731] clk: imx8mn: rename vpu_pll to m7_alt_pll Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 234/731] clk: imx: replace osc_hdmi with dummy Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 235/731] clk: imx8mn: fix imx8mn_sai2_sels clocks list Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 236/731] clk: imx8mn: fix imx8mn_enet_phy_sels " Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 237/731] pinctrl: pinconf-generic: add missing of_node_put() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 238/731] media: dvb-core: Fix ignored return value in dvb_register_frontend() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 239/731] media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 240/731] media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 241/731] drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 242/731] ASoC: dt-bindings: wcd9335: fix reset line polarity in example Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 243/731] ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_snd Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 244/731] NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 245/731] NFSv4.2: Fix a memory stomp in decode_attr_security_label Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 246/731] NFSv4.2: Fix initialisation of struct nfs4_label Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 247/731] NFSv4: Fix a credential leak in _nfs4_discover_trunking() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 248/731] NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 249/731] NFS: Fix an Oops in nfs_d_automount() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 250/731] ALSA: asihpi: fix missing pci_disable_device() Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 251/731] wifi: iwlwifi: mvm: fix double free on tx path Greg Kroah-Hartman
2022-12-28 14:35 ` [PATCH 5.15 252/731] ASoC: mediatek: mt8173: Fix debugfs registration for components Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 253/731] ASoC: mediatek: mt8173: Enable IRQ when pdata is ready Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 254/731] drm/amd/pm/smu11: BACO is supported when its in BACO state Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 255/731] drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 256/731] drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 257/731] drm/amdkfd: Fix memory leakage Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 258/731] ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 259/731] netfilter: conntrack: set icmpv6 redirects as RELATED Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 260/731] Input: wistron_btns - disable on UML Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 261/731] bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 262/731] bpf, sockmap: Fix missing BPF_F_INGRESS flag when using apply_bytes Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 263/731] bpf, sockmap: Fix data loss caused by using apply_bytes on ingress redirect Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 264/731] bonding: uninitialized variable in bond_miimon_inspect() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 265/731] spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 266/731] wifi: mac80211: fix memory leak in ieee80211_if_add() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 267/731] wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() fails Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 268/731] mt76: stop the radar detector after leaving dfs channel Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 269/731] wifi: mt76: mt7921: fix reporting of TX AGGR histogram Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 270/731] wifi: mt76: fix coverity overrun-call in mt76_get_txpower() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 271/731] regulator: core: fix module refcount leak in set_supply() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 272/731] clk: qcom: lpass-sc7180: Fix pm_runtime usage Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 273/731] clk: qcom: clk-krait: fix wrong div2 functions Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 274/731] hsr: Add a rcu-read lock to hsr_forward_skb() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 275/731] hsr: Avoid double remove of a node Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 276/731] hsr: Disable netpoll Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 277/731] hsr: Synchronize sending frames to have always incremented outgoing seq nr Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 278/731] hsr: Synchronize sequence number updates Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 279/731] configfs: fix possible memory leak in configfs_create_dir() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 280/731] regulator: core: fix resource leak in regulator_register() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 281/731] hwmon: (jc42) Convert register access and caching to regmap/regcache Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 282/731] hwmon: (jc42) Restore the min/max/critical temperatures on resume Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 283/731] bpf, sockmap: fix race in sock_map_free() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 284/731] ALSA: pcm: Set missing stop_operating flag at undoing trigger start Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 285/731] media: saa7164: fix missing pci_disable_device() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 286/731] ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 287/731] xprtrdma: Fix regbuf data not freed in rpcrdma_req_create() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 288/731] SUNRPC: Fix missing release socket in rpc_sockname() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 289/731] NFSv4.x: Fail client initialisation if state manager thread cant run Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 290/731] riscv, bpf: Emit fixed-length instructions for BPF_PSEUDO_FUNC Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 291/731] mmc: alcor: fix return value check of mmc_add_host() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 292/731] mmc: moxart: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 293/731] mmc: mxcmmc: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 294/731] mmc: pxamci: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 295/731] mmc: rtsx_pci: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 296/731] mmc: rtsx_usb_sdmmc: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 297/731] mmc: toshsd: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 298/731] mmc: vub300: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 299/731] mmc: wmt-sdmmc: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 300/731] mmc: atmel-mci: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 301/731] mmc: omap_hsmmc: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 302/731] mmc: meson-gx: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 303/731] mmc: via-sdmmc: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 304/731] mmc: wbsd: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 305/731] mmc: mmci: " Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 306/731] mmc: renesas_sdhi: alway populate SCC pointer Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 307/731] memstick: ms_block: Add error handling support for add_disk() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 308/731] memstick/ms_block: Add check for alloc_ordered_workqueue Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 309/731] mmc: core: Normalize the error handling branch in sd_read_ext_regs() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 310/731] regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe() Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 311/731] media: c8sectpfe: Add of_node_put() when breaking out of loop Greg Kroah-Hartman
2022-12-28 14:36 ` [PATCH 5.15 312/731] media: coda: Add check for dcoda_iram_alloc Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 313/731] media: coda: Add check for kmalloc Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 314/731] clk: samsung: Fix memory leak in _samsung_clk_register_pll() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 315/731] spi: spi-gpio: Dont set MOSI as an input if not 3WIRE mode Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 316/731] wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 317/731] wifi: rtl8xxxu: Fix the channel width reporting Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 318/731] wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 319/731] blktrace: Fix output non-blktrace event when blk_classic option enabled Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 320/731] bpf: Do not zero-extend kfunc return values Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 321/731] clk: socfpga: Fix memory leak in socfpga_gate_init() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 322/731] net: vmw_vsock: vmci: Check memcpy_from_msg() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 323/731] net: defxx: Fix missing err handling in dfx_init() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 324/731] net: stmmac: selftests: fix potential memleak in stmmac_test_arpoffload() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 325/731] net: stmmac: fix possible memory leak in stmmac_dvr_probe() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 326/731] drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 327/731] of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 328/731] ethernet: s2io: dont call dev_kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 329/731] net: farsync: Fix kmemleak when rmmods farsync Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 330/731] net/tunnel: wait until all sk_user_data reader finish before releasing the sock Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 331/731] net: apple: mace: dont call dev_kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 332/731] net: apple: bmac: " Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 333/731] net: emaclite: " Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 334/731] net: ethernet: dnet: " Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 335/731] hamradio: " Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 336/731] net: amd: lance: " Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 337/731] af_unix: call proto_unregister() in the error path in af_unix_init() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 338/731] net: amd-xgbe: Fix logic around active and passive cables Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 339/731] net: amd-xgbe: Check only the minimum speed for active/passive cables Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 340/731] can: tcan4x5x: Remove invalid write in clear_interrupts Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 341/731] can: m_can: Call the RAM init directly from m_can_chip_config Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 342/731] can: tcan4x5x: Fix use of register error status mask Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 343/731] net: lan9303: Fix read error execution path Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 344/731] ntb_netdev: Use dev_kfree_skb_any() in interrupt context Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 345/731] sctp: sysctl: make extra pointers netns aware Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 346/731] Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMS Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 347/731] Bluetooth: btintel: Fix missing free skb in btintel_setup_combined() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 348/731] Bluetooth: btusb: dont call kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 349/731] Bluetooth: hci_qca: " Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 350/731] Bluetooth: hci_ll: " Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 351/731] Bluetooth: hci_h5: " Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 352/731] Bluetooth: hci_bcsp: " Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 353/731] Bluetooth: hci_core: " Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 354/731] Bluetooth: RFCOMM: " Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 355/731] stmmac: fix potential division by 0 Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 356/731] i40e: Fix the inability to attach XDP program on downed interface Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 357/731] net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 358/731] apparmor: fix a memleak in multi_transaction_new() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 359/731] apparmor: fix lockdep warning when removing a namespace Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 360/731] apparmor: Fix abi check to include v8 abi Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 361/731] crypto: hisilicon/qm - fix missing destroy qp_idr Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 362/731] crypto: sun8i-ss - use dma_addr instead u32 Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 363/731] crypto: nitrox - avoid double free on error path in nitrox_sriov_init() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 364/731] scsi: core: Fix a race between scsi_done() and scsi_timeout() Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 365/731] apparmor: Use pointer to struct aa_label for lbs_cred Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 366/731] PCI: dwc: Fix n_fts[] array overrun Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 367/731] RDMA/core: Fix order of nldev_exit call Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 368/731] PCI: pci-epf-test: Register notifier if only core_init_notifier is enabled Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 369/731] f2fs: Fix the race condition of resize flag between resizefs Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 370/731] crypto: rockchip - do not do custom power management Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 371/731] crypto: rockchip - do not store mode globally Greg Kroah-Hartman
2022-12-28 14:37 ` [PATCH 5.15 372/731] crypto: rockchip - add fallback for cipher Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 373/731] crypto: rockchip - add fallback for ahash Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 374/731] crypto: rockchip - better handle cipher key Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 375/731] crypto: rockchip - remove non-aligned handling Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 376/731] crypto: rockchip - rework by using crypto_engine Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 377/731] apparmor: Fix memleak in alloc_ns() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 378/731] f2fs: fix to invalidate dcc->f2fs_issue_discard in error path Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 379/731] f2fs: fix normal discard process Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 380/731] f2fs: fix to destroy sbi->post_read_wq in error path of f2fs_fill_super() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 381/731] RDMA/irdma: Report the correct link speed Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 382/731] scsi: qla2xxx: Fix set-but-not-used variable warnings Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 383/731] RDMA/siw: Fix immediate work request flush to completion queue Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 384/731] IB/mad: Dont call to function that might sleep while in atomic context Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 385/731] PCI: vmd: Disable MSI remapping after suspend Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 386/731] RDMA/restrack: Release MR restrack when delete Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 387/731] RDMA/core: Make sure "ib_port" is valid when access sysfs node Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 388/731] RDMA/nldev: Return "-EAGAIN" if the cm_id isnt from expected port Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 389/731] RDMA/siw: Set defined status for work completion with undefined status Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 390/731] scsi: scsi_debug: Fix a warning in resp_write_scat() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 391/731] crypto: ccree - Remove debugfs when platform_driver_register failed Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 392/731] crypto: cryptd - Use request context instead of stack for sub-request Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 393/731] crypto: hisilicon/qm - add missing pci_dev_put() in q_num_set() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 394/731] RDMA/hns: Repacing dseg_len by macros in fill_ext_sge_inl_data() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 395/731] RDMA/hns: Fix ext_sge num error when post send Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 396/731] PCI: Check for alloc failure in pci_request_irq() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 397/731] RDMA/hfi: Decrease PCI device reference count in error path Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 398/731] crypto: ccree - Make cc_debugfs_global_fini() available for module init function Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 399/731] RDMA/hns: fix memory leak in hns_roce_alloc_mr() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 400/731] RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 401/731] dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 402/731] dt-bindings: visconti-pcie: Fix interrupts array max constraints Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 403/731] scsi: hpsa: Fix possible memory leak in hpsa_init_one() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 404/731] crypto: tcrypt - Fix multibuffer skcipher speed test mem leak Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 405/731] padata: Always leave BHs disabled when running ->parallel() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 406/731] padata: Fix list iterator in padata_do_serial() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 407/731] scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 408/731] scsi: hpsa: Fix error handling in hpsa_add_sas_host() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 409/731] scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 410/731] scsi: efct: Fix possible memleak in efct_device_init() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 411/731] scsi: scsi_debug: Fix a warning in resp_verify() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 412/731] scsi: scsi_debug: Fix a warning in resp_report_zones() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 413/731] scsi: fcoe: Fix possible name leak when device_register() fails Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 414/731] scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 415/731] scsi: ipr: Fix WARNING in ipr_init() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 416/731] scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 417/731] scsi: snic: Fix possible UAF in snic_tgt_create() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 418/731] RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 419/731] f2fs: avoid victim selection from previous victim section Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 420/731] RDMA/nldev: Fix failure to send large messages Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 421/731] crypto: amlogic - Remove kcalloc without check Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 422/731] crypto: omap-sham - Use pm_runtime_resume_and_get() in omap_sham_probe() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 423/731] riscv/mm: add arch hook arch_clear_hugepage_flags Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 424/731] RDMA/hfi1: Fix error return code in parse_platform_config() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 425/731] RDMA/srp: Fix error return code in srp_parse_options() Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 426/731] PCI: mt7621: Rename mt7621_pci_ to mt7621_pcie_ Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 427/731] PCI: mt7621: Add sentinel to quirks table Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 428/731] orangefs: Fix sysfs not cleanup when dev init failed Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 429/731] RDMA/hns: Fix AH attr queried by query_qp Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 430/731] RDMA/hns: Fix PBL page MTR find Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 431/731] RDMA/hns: Fix page size cap from firmware Greg Kroah-Hartman
2022-12-28 14:38 ` [PATCH 5.15 432/731] RDMA/hns: Fix error code of CMD Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 433/731] crypto: img-hash - Fix variable dereferenced before check hdev->req Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 434/731] hwrng: amd - Fix PCI device refcount leak Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 435/731] hwrng: geode " Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 436/731] IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 437/731] RISC-V: Align the shadow stack Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 438/731] drivers: dio: fix possible memory leak in dio_init() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 439/731] serial: tegra: Read DMA status before terminating Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 440/731] serial: 8250_bcm7271: Fix error handling in brcmuart_init() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 441/731] class: fix possible memory leak in __class_register() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 442/731] vfio: platform: Do not pass return buffer to ACPI _RST method Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 443/731] uio: uio_dmem_genirq: Fix missing unlock in irq configuration Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 444/731] uio: uio_dmem_genirq: Fix deadlock between irq config and handling Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 445/731] usb: fotg210-udc: Fix ages old endianness issues Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 446/731] staging: vme_user: Fix possible UAF in tsi148_dma_list_add Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 447/731] usb: typec: Check for ops->exit instead of ops->enter in altmode_exit Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 448/731] usb: typec: tcpci: fix of node refcount leak in tcpci_register_port() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 449/731] usb: typec: tipd: Cleanup resources if devm_tps6598_psy_register fails Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 450/731] usb: typec: tipd: Fix spurious fwnode_handle_put in error path Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 451/731] extcon: usbc-tusb320: Add support for mode setting and reset Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 452/731] extcon: usbc-tusb320: Add support for TUSB320L Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 453/731] usb: typec: Factor out non-PD fwnode properties Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 454/731] extcon: usbc-tusb320: Factor out extcon into dedicated functions Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 455/731] extcon: usbc-tusb320: Add USB TYPE-C support Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 456/731] extcon: usbc-tusb320: Update state on probe even if no IRQ pending Greg Kroah-Hartman
2022-12-28 15:45 ` Alvin Šipraga
2022-12-28 21:04 ` Peter Rosin
2022-12-29 0:09 ` Peter Rosin
2022-12-30 9:15 ` Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 457/731] serial: amba-pl011: avoid SBSA UART accessing DMACR register Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 458/731] serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 459/731] serial: stm32: move dma_request_chan() before clk_prepare_enable() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 460/731] serial: pch: Fix PCI device refcount leak in pch_request_dma() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 461/731] tty: serial: clean up stop-tx part in altera_uart_tx_chars() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 462/731] tty: serial: altera_uart_{r,t}x_chars() need only uart_port Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 463/731] serial: altera_uart: fix locking in polling mode Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 464/731] serial: sunsab: Fix error handling in sunsab_init() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 465/731] test_firmware: fix memory leak in test_firmware_init() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 466/731] misc: ocxl: fix possible name leak in ocxl_file_register_afu() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 467/731] ocxl: fix pci device refcount leak when calling get_function_0() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 468/731] misc: tifm: fix possible memory leak in tifm_7xx1_switch_media() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 469/731] misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 470/731] firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 471/731] cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 472/731] cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 473/731] iio: temperature: ltc2983: make bulk write buffer DMA-safe Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 474/731] iio: adis: handle devices that cannot unmask the drdy pin Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 475/731] iio: adis: stylistic changes Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 476/731] iio:imu:adis: Move exports into IIO_ADISLIB namespace Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 477/731] iio: adis: add __adis_enable_irq() implementation Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 478/731] counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 479/731] coresight: trbe: remove cpuhp instance node before remove cpuhp state Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 480/731] usb: roles: fix of node refcount leak in usb_role_switch_is_parent() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 481/731] usb: gadget: f_hid: fix f_hidg lifetime vs cdev Greg Kroah-Hartman
2023-01-05 12:18 ` Lee Jones
2023-01-05 12:28 ` Greg Kroah-Hartman
2023-01-05 14:08 ` Lee Jones
2022-12-28 14:39 ` [PATCH 5.15 482/731] usb: gadget: f_hid: fix refcount leak on error path Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 483/731] drivers: mcb: fix resource leak in mcb_probe() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 484/731] mcb: mcb-parse: fix error handing in chameleon_parse_gdd() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 485/731] chardev: fix error handling in cdev_device_add() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 486/731] i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 487/731] staging: rtl8192u: Fix use after free in ieee80211_rx() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 488/731] staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 489/731] vme: Fix error not catched in fake_init() Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 490/731] gpiolib: Get rid of redundant else Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 491/731] gpiolib: cdev: fix NULL-pointer dereferences Greg Kroah-Hartman
2022-12-28 14:39 ` [PATCH 5.15 492/731] gpiolib: make struct comments into real kernel docs Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 493/731] gpiolib: protect the GPIO device against being dropped while in use by user-space Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 494/731] i2c: mux: reg: check return value after calling platform_get_resource() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 495/731] i2c: ismt: Fix an out-of-bounds bug in ismt_access() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 496/731] usb: storage: Add check for kcalloc Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 497/731] tracing/hist: Fix issue of losting command info in error_log Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 498/731] ksmbd: Fix resource leak in ksmbd_session_rpc_open() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 499/731] samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 500/731] thermal/drivers/imx8mm_thermal: Validate temperature range Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 501/731] thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2 Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 502/731] thermal/drivers/qcom/lmh: Fix irq handler return value Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 503/731] fbdev: ssd1307fb: Drop optional dependency Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 504/731] fbdev: pm2fb: fix missing pci_disable_device() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 505/731] fbdev: via: Fix error in via_core_init() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 506/731] fbdev: vermilion: decrease reference count in error path Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 507/731] fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 508/731] fbdev: geode: dont build on UML Greg Kroah-Hartman
2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 509/731] fbdev: uvesafb: " Greg Kroah-Hartman
2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 510/731] fbdev: uvesafb: Fixes an error handling path in uvesafb_probe() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 511/731] HSI: omap_ssi_core: fix unbalanced pm_runtime_disable() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 512/731] HSI: omap_ssi_core: fix possible memory leak in ssi_probe() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 513/731] power: supply: fix residue sysfs file in error handle route of __power_supply_register() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 514/731] perf trace: Return error if a system call doesnt exist Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 515/731] perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 516/731] perf trace: Handle failure when trace point folder is missed Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 517/731] perf symbol: correction while adjusting symbol Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 518/731] power: supply: z2_battery: Fix possible memleak in z2_batt_probe() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 519/731] HSI: omap_ssi_core: Fix error handling in ssi_init() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 520/731] power: supply: ab8500: Fix error handling in ab8500_charger_init() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 521/731] power: supply: fix null pointer dereferencing in power_supply_get_battery_info Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 522/731] perf stat: Refactor __run_perf_stat() common code Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 523/731] perf stat: Do not delay the workload with --delay Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 524/731] RDMA/siw: Fix pointer cast warning Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 525/731] fs/ntfs3: Avoid UBSAN error on true_sectors_per_clst() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 526/731] overflow: Implement size_t saturating arithmetic helpers Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 527/731] fs/ntfs3: Harden against integer overflows Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 528/731] iommu/sun50i: Fix reset release Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 529/731] iommu/sun50i: Consider all fault sources for reset Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 530/731] iommu/sun50i: Fix R/W permission check Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 531/731] iommu/sun50i: Fix flush size Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 532/731] iommu/rockchip: fix permission bits in page table entries v2 Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 533/731] phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 534/731] include/uapi/linux/swab: Fix potentially missing __always_inline Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 535/731] pwm: tegra: Improve required rate calculation Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 536/731] fs/ntfs3: Fix slab-out-of-bounds read in ntfs_trim_fs Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 537/731] dmaengine: idxd: Fix crc_val field for completion record Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 538/731] rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0 Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 539/731] rtc: cmos: Fix event handler registration ordering issue Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 540/731] rtc: cmos: Fix wake alarm breakage Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 541/731] rtc: cmos: fix build on non-ACPI platforms Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 542/731] rtc: cmos: Call cmos_wake_setup() from cmos_do_probe() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 543/731] rtc: cmos: Call rtc_wake_setup() " Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 544/731] rtc: cmos: Eliminate forward declarations of some functions Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 545/731] rtc: cmos: Rename ACPI-related functions Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 546/731] rtc: cmos: Disable ACPI RTC event on removal Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 547/731] rtc: snvs: Allow a time difference on clock register read Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 548/731] rtc: pcf85063: Fix reading alarm Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 549/731] iommu/amd: Fix pci device refcount leak in ppr_notifier() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 550/731] iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 551/731] macintosh: fix possible memory leak in macio_add_one_device() Greg Kroah-Hartman
2022-12-28 14:40 ` [PATCH 5.15 552/731] macintosh/macio-adb: check the return value of ioremap() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 553/731] powerpc/52xx: Fix a resource leak in an error handling path Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 554/731] cxl: Fix refcount leak in cxl_calc_capp_routing Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 555/731] powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 556/731] powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 557/731] phy: qcom-qmp: create copies of QMP PHY driver Greg Kroah-Hartman
2022-12-28 16:49 ` Vinod Koul
2022-12-31 11:56 ` Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 558/731] powerpc/perf: callchain validate kernel stack pointer bounds Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 559/731] powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 560/731] powerpc/hv-gpci: Fix hv_gpci event list Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 561/731] selftests/powerpc: Fix resource leaks Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 562/731] iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 563/731] pwm: sifive: Call pwm_sifive_update_clock() while mutex is held Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 564/731] pwm: mtk-disp: Fix the parameters calculated by the enabled flag of disp_pwm Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 565/731] pwm: mediatek: always use bus clock for PWM on MT7622 Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 566/731] remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 567/731] remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 568/731] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 569/731] remoteproc: qcom_q6v5_pas: detach power domains on remove Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 570/731] remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 571/731] remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 572/731] powerpc/eeh: Drop redundant spinlock initialization Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 573/731] powerpc/pseries/eeh: use correct API for error log size Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 574/731] mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 575/731] mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 576/731] mfd: pm8008: Remove driver data structure pm8008_data Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 577/731] mfd: pm8008: Fix return value check in pm8008_probe() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 578/731] netfilter: flowtable: really fix NAT IPv6 offload Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 579/731] rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 580/731] rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 581/731] rtc: pcf85063: fix pcf85063_clkout_control Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 582/731] nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 583/731] net: macsec: fix net device access prior to holding a lock Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 584/731] mISDN: hfcsusb: dont call dev_kfree_skb/kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 585/731] mISDN: hfcpci: " Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 586/731] mISDN: hfcmulti: " Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 587/731] block, bfq: fix possible uaf for bfqq->bic Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 588/731] selftests/bpf: Add test for unstable CT lookup API Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 589/731] net: enetc: avoid buffer leaks on xdp_do_redirect() failure Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 590/731] nfc: pn533: Clear nfc_target before being used Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 591/731] unix: Fix race in SOCK_SEQPACKETs unix_dgram_sendmsg() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 592/731] r6040: Fix kmemleak in probe and remove Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 593/731] blk-iocost: simplify ioc_name Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 594/731] igc: Enhance Qbv scheduling by using first flag bit Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 595/731] igc: Use strict cycles for Qbv scheduling Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 596/731] igc: Add checking for basetime less than zero Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 597/731] igc: allow BaseTime 0 enrollment for Qbv Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 598/731] igc: recalculate Qbv end_time by considering cycle time Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 599/731] igc: Lift TAPRIO schedule restriction Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 600/731] igc: Set Qbv start_time and end_time to end_time if not being configured in GCL Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 601/731] rtc: mxc_v2: Add missing clk_disable_unprepare() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 602/731] selftests: devlink: fix the fd redirect in dummy_reporter_test Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 603/731] openvswitch: Fix flow lookup to use unmasked key Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 604/731] soc: mediatek: pm-domains: Fix the power glitch issue Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 605/731] arm64: dts: mt8183: Fix Mali GPU clock Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 606/731] skbuff: Account for tail adjustment during pull operations Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 607/731] mailbox: mpfs: read the system controllers status Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 608/731] mailbox: arm_mhuv2: Fix return value check in mhuv2_probe() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 609/731] mailbox: zynq-ipi: fix error handling while device_register() fails Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 610/731] net_sched: reject TCF_EM_SIMPLE case for complex ematch module Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 611/731] rxrpc: Fix missing unlock in rxrpc_do_sendmsg() Greg Kroah-Hartman
2022-12-28 14:41 ` [PATCH 5.15 612/731] myri10ge: Fix an error handling path in myri10ge_probe() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 613/731] net: stream: purge sk_error_queue in sk_stream_kill_queues() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 614/731] HID: amd_sfh: Add missing check for dma_alloc_coherent Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 615/731] rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 616/731] arm64: make is_ttbrX_addr() noinstr-safe Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 617/731] video: hyperv_fb: Avoid taking busy spinlock on panic path Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 618/731] x86/hyperv: Remove unregister syscore call from Hyper-V cleanup Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 619/731] binfmt_misc: fix shift-out-of-bounds in check_special_flags Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 620/731] fs: jfs: fix shift-out-of-bounds in dbAllocAG Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 621/731] udf: Avoid double brelse() in udf_rename() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 622/731] jfs: Fix fortify moan in symlink Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 623/731] fs: jfs: fix shift-out-of-bounds in dbDiscardAG Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 624/731] ACPICA: Fix error code path in acpi_ds_call_control_method() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 625/731] nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 626/731] nilfs2: fix shift-out-of-bounds due to too large exponent of block size Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 627/731] acct: fix potential integer overflow in encode_comp_t() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 628/731] hfs: fix OOB Read in __hfs_brec_find Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 629/731] drm/etnaviv: add missing quirks for GC300 Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 630/731] media: imx-jpeg: Disable useless interrupt to avoid kernel panic Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 631/731] brcmfmac: return error when getting invalid max_flowrings from dongle Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 632/731] wifi: ath9k: verify the expected usb_endpoints are present Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 633/731] wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 634/731] ASoC: codecs: rt298: Add quirk for KBL-R RVP platform Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 635/731] ipmi: fix memleak when unload ipmi driver Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 636/731] drm/amd/display: prevent memory leak Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 637/731] Revert "drm/amd/display: Limit max DSC target bpp for specific monitors" Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 638/731] qed (gcc13): use u16 for fid to be big enough Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 639/731] bpf: make sure skb->len != 0 when redirecting to a tunneling device Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 640/731] net: ethernet: ti: Fix return type of netcp_ndo_start_xmit() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 641/731] hamradio: baycom_epp: Fix return type of baycom_send_packet() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 642/731] wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 643/731] igb: Do not free q_vector unless new one was allocated Greg Kroah-Hartman
2022-12-28 14:42 ` [Intel-wired-lan] " Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 644/731] drm/amdgpu: Fix type of second parameter in trans_msg() callback Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 645/731] drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 646/731] s390/ctcm: Fix return type of ctc{mp,}m_tx() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 647/731] s390/netiucv: Fix return type of netiucv_tx() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 648/731] s390/lcs: Fix return type of lcs_start_xmit() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 649/731] drm/msm: Use drm_mode_copy() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 650/731] drm/rockchip: " Greg Kroah-Hartman
2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 651/731] drm/sti: " Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 652/731] drm/mediatek: Fix return type of mtk_hdmi_bridge_mode_valid() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 653/731] drivers/md/md-bitmap: check the return value of md_bitmap_get_counter() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 654/731] md/raid1: stop mdx_raid1 thread when raid1 array run failed Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 655/731] drm/amd/display: fix array index out of bound error in bios parser Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 656/731] net: add atomic_long_t to net_device_stats fields Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 657/731] ipv6/sit: use DEV_STATS_INC() to avoid data-races Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 658/731] mrp: introduce active flags to prevent UAF when applicant uninit Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 659/731] ppp: associate skb with a device at tx Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 660/731] bpf: Prevent decl_tag from being referenced in func_proto arg Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 661/731] ethtool: avoiding integer overflow in ethtool_phys_id() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 662/731] media: dvb-frontends: fix leak of memory fw Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 663/731] media: dvbdev: adopts refcnt to avoid UAF Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 664/731] media: dvb-usb: fix memory leak in dvb_usb_adapter_init() Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 665/731] blk-mq: fix possible memleak when register hctx failed Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 666/731] drm/amd/display: Use the largest vready_offset in pipe group Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 667/731] libbpf: Avoid enum forward-declarations in public API in C++ mode Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 668/731] regulator: core: fix use_count leakage when handling boot-on Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 669/731] wifi: mt76: do not run mt76u_status_worker if the device is not running Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 670/731] mmc: f-sdh30: Add quirks for broken timeout clock capability Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 671/731] mmc: renesas_sdhi: better reset from HS400 mode Greg Kroah-Hartman
2022-12-28 14:42 ` [PATCH 5.15 672/731] media: si470x: Fix use-after-free in si470x_int_in_callback() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 673/731] clk: st: Fix memory leak in st_of_quadfs_setup() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 674/731] crypto: hisilicon/hpre - fix resource leak in remove process Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 675/731] scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 676/731] scsi: ufs: Reduce the START STOP UNIT timeout Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 677/731] scsi: elx: libefc: Fix second parameter type in state callbacks Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 678/731] hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 679/731] drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 680/731] drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 681/731] orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 682/731] orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 683/731] tools/include: Add _RET_IP_ and math definitions to kernel.h Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 684/731] KVM: selftests: Fix build regression by using accessor function Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 685/731] hwmon: (jc42) Fix missing unlock on error in jc42_write() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 686/731] ALSA/ASoC: hda: move/rename snd_hdac_ext_stop_streams to hdac_stream.c Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 687/731] ALSA: hda: add snd_hdac_stop_streams() helper Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 688/731] ASoC: Intel: Skylake: Fix driver hang during shutdown Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 689/731] ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 690/731] ASoC: audio-graph-card: fix refcount leak of cpu_ep in __graph_for_each_link() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 691/731] ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 692/731] ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 693/731] ASoC: wm8994: Fix potential deadlock Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 694/731] ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 695/731] ASoC: rt5670: Remove unbalanced pm_runtime_put() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 696/731] drm/i915/display: Dont disable DDI/Transcoder when setting phy test pattern Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 697/731] LoadPin: Ignore the "contents" argument of the LSM hooks Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 698/731] pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 699/731] perf debug: Set debug_peo_args and redirect_to_stderr variable to correct values in perf_quiet_option() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 700/731] afs: Fix lost servers_outstanding count Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 701/731] pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 702/731] ima: Simplify ima_lsm_copy_rule Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 703/731] ALSA: usb-audio: add the quirk for KT0206 device Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 704/731] ALSA: hda/realtek: Add quirk for Lenovo TianYi510Pro-14IOB Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 705/731] ALSA: hda/hdmi: Add HP Device 0x8711 to force connect list Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 706/731] usb: cdnsp: fix lack of ZLP for ep0 Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 707/731] usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 708/731] arm64: dts: qcom: sm8250: fix USB-DP PHY registers Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 709/731] usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_mode Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 710/731] usb: dwc3: core: defer probe on ulpi_read_id timeout Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 711/731] xhci: Prevent infinite loop in transaction errors recovery for streams Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 712/731] HID: wacom: Ensure bootloader PID is usable in hidraw mode Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 713/731] HID: mcp2221: dont connect hidraw Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 714/731] loop: Fix the max_loop commandline argument treatment when it is set to 0 Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 715/731] 9p: set req refcount to zero to avoid uninitialized usage Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 716/731] security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6 Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 717/731] reiserfs: Add missing calls to reiserfs_security_free() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 718/731] iio: fix memory leak in iio_device_register_eventset() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 719/731] iio: adc: ad_sigma_delta: do not use internal iio_dev lock Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 720/731] iio: adc128s052: add proper .data members in adc128_of_match table Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 721/731] regulator: core: fix deadlock on regulator enable Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 722/731] floppy: Fix memory leak in do_floppy_init() Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 723/731] gcov: add support for checksum field Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 724/731] fbdev: fbcon: release buffer when fbcon_do_set_font() failed Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 725/731] ovl: fix use inode directly in rcu-walk mode Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 726/731] btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 727/731] scsi: qla2xxx: Fix crash when I/O abort times out Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 728/731] net: stmmac: fix errno when create_singlethread_workqueue() fails Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 729/731] media: dvbdev: fix build warning due to comments Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 730/731] media: dvbdev: fix refcnt bug Greg Kroah-Hartman
2022-12-28 14:43 ` [PATCH 5.15 731/731] extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered Greg Kroah-Hartman
2022-12-28 19:08 ` [PATCH 5.15 000/731] 5.15.86-rc1 review Florian Fainelli
2022-12-28 20:42 ` Slade Watkins
2022-12-29 3:42 ` Bagas Sanjaya
2022-12-29 3:50 ` Ron Economos
2022-12-29 7:38 ` Thierry Reding
2022-12-29 7:43 ` Thierry Reding
2022-12-29 7:54 ` Thierry Reding
2022-12-29 13:42 ` Guenter Roeck
2022-12-29 14:40 ` Pavel Machek
2022-12-29 16:56 ` Nathan Chancellor
2022-12-29 23:26 ` Shuah Khan
2022-12-30 7:28 ` Naresh Kamboju
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.