* __elv_add_request OOPS
@ 2011-05-24 4:29 Parag Warudkar
2011-05-24 10:44 ` Jens Axboe
0 siblings, 1 reply; 47+ messages in thread
From: Parag Warudkar @ 2011-05-24 4:29 UTC (permalink / raw)
To: linux-kernel; +Cc: jaxboe
External DVD drive - connected when suspended, removed before resume.
Results in NULL pointer dereference in __blk_add_request on resume.
*ffffffff811d6503: 48 89 58 08 mov %rbx,0x8(%rax) |
%ebx = ffff880131559020 <--- faulting instruction
48 89 58 08 appears only in list_add :
static inline void list_add(struct list_head *new, struct list_head *head)
{
__list_add(new, head, head->next);
ffffffff81ac012c: 49 8b 04 24 mov (%r12),%rax
#ifndef CONFIG_DEBUG_LIST
static inline void __list_add(struct list_head *new,
struct list_head *prev,
struct list_head *next)
{
next->prev = new;
ffffffff81ac0130: 48 89 58 08 mov %rbx,0x8(%rax)
AFAICS list_add is only called from one place in __elv_add_request :
switch (where) {
case ELEVATOR_INSERT_REQUEUE:
case ELEVATOR_INSERT_FRONT:
rq->cmd_flags |= REQ_SOFTBARRIER;
** list_add(&rq->queuelist, &q->queue_head);
break;
Now, where is the patch? :)
Parag
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39+ (parag@natty-nar) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #4 SMP Mon May 23 09:50:31 EDT 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.39+ root=UUID=0433b702-6d22-4465-a752-f3e5485dac09 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bb63f000 (usable)
[ 0.000000] BIOS-e820: 00000000bb63f000 - 00000000bb6bf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb6bf000 - 00000000bb7bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb7bf000 - 00000000bb7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb7ff000 - 00000000bb800000 (usable)
[ 0.000000] BIOS-e820: 00000000bb800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 0876 /Base Board Product Name, BIOS 37CN18WW(V1.04) 01/25/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 138000000 mask FF8000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bb800000
[ 0.000000] 0000000000 - 00bb800000 page 2M
[ 0.000000] kernel direct mapping tables up to bb800000 @ bb63b000-bb63f000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ 137ffa000-138000000
[ 0.000000] RAMDISK: 35fa4000 - 36fca000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bb7fe120 00084 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000bb7fc000 000F4 (v04 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000bb7ee000 0AFDE (v02 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000bb76a000 00040
[ 0.000000] ACPI: ASF! 00000000bb7fd000 000A5 (v32 INTEL Calpella 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 00000000bb7fb000 00038 (v01 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 00000000bb7fa000 0008C (v02 INTEL Calpella 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000bb7f9000 0003C (v01 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 00000000bb7ed000 00176 (v01 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 00000000bb7ea000 00028 (v01 INTEL Calpella 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 00000000bb7e7000 00034 (v04 INTEL Calpella 00000001 MSFT 01000013)
[ 0.000000] ACPI: WDAT 00000000bb7e6000 00224 (v01 INTEL Calpella 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bb7e5000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bb7e4000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bb7e3000 0049F (v01 PmRef ApTst 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880128200000-ffff88012b9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bb63f
[ 0.000000] 0: 0x000bb7ff -> 0x000bb800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 996813
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 749176 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bb63f000 - 00000000bb6bf000
[ 0.000000] PM: Registered nosave memory: 00000000bb6bf000 - 00000000bb7bf000
[ 0.000000] PM: Registered nosave memory: 00000000bb7bf000 - 00000000bb7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s82752 r8192 d23744 u262144
[ 0.000000] pcpu-alloc: s82752 r8192 d23744 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 979336
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.39+ root=UUID=0433b702-6d22-4465-a752-f3e5485dac09 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3827640k/5111808k available (4645k kernel code, 1124556k absent, 159612k reserved, 6126k data, 760k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 1330.019 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2661.87 BogoMIPS (lpj=4433396)
[ 0.000011] pid_max: default: 32768 minimum: 301
[ 0.000053] Security Framework initialized
[ 0.000069] Mount-cache hash table entries: 256
[ 0.000222] Initializing cgroup subsys ns
[ 0.000227] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.000230] Initializing cgroup subsys cpuacct
[ 0.000237] Initializing cgroup subsys memory
[ 0.000246] Initializing cgroup subsys devices
[ 0.000249] Initializing cgroup subsys freezer
[ 0.000252] Initializing cgroup subsys net_cls
[ 0.000279] CPU: Physical Processor ID: 0
[ 0.000281] CPU: Processor Core ID: 0
[ 0.000288] mce: CPU supports 9 MCE banks
[ 0.000304] CPU0: Thermal monitoring enabled (TM1)
[ 0.000314] using mwait in idle threads.
[ 0.003354] ACPI: Core revision 20110316
[ 0.184385] ftrace: allocating 18717 entries in 74 pages
[ 0.193049] Setting APIC routing to flat
[ 0.193465] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.226432] CPU0: Intel(R) Core(TM) i5 CPU U 470 @ 1.33GHz stepping 05
[ 0.332814] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.332823] ... version: 3
[ 0.332825] ... bit width: 48
[ 0.332827] ... generic registers: 4
[ 0.332829] ... value mask: 0000ffffffffffff
[ 0.332831] ... max period: 000000007fffffff
[ 0.332833] ... fixed-purpose events: 3
[ 0.332834] ... event mask: 000000070000000f
[ 0.333369] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.333496] Booting Node 0, Processors #1
[ 0.333500] smpboot cpu 1: start_ip = 98000
[ 0.446177] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.446328] #2
[ 0.446331] smpboot cpu 2: start_ip = 98000
[ 0.559385] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.559530] #3
[ 0.559532] smpboot cpu 3: start_ip = 98000
[ 0.672588] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.672638] Brought up 4 CPUs
[ 0.672641] Total of 4 processors activated (10644.35 BogoMIPS).
[ 0.675300] devtmpfs: initialized
[ 0.675465] PM: Registering ACPI NVS region at bb6bf000 (1048576 bytes)
[ 0.676675] print_constraints: dummy:
[ 0.676706] Time: 15:15:24 Date: 05/23/11
[ 0.676746] NET: Registered protocol family 16
[ 0.676844] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.676847] ACPI: bus type pci registered
[ 0.676943] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.676948] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.729391] PCI: Using configuration type 1 for base access
[ 0.730050] bio: create slab <bio-0> at 0
[ 0.733723] ACPI: EC: Look up EC in DSDT
[ 0.737215] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.759212] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.761159] ACPI: SSDT 00000000bb691a98 00300 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.762023] ACPI: Dynamic OEM Table Load:
[ 0.762027] ACPI: SSDT (null) 00300 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.762282] ACPI: SSDT 00000000bb690018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.763141] ACPI: Dynamic OEM Table Load:
[ 0.763145] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.782863] ACPI: SSDT 00000000bb691718 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.783791] ACPI: Dynamic OEM Table Load:
[ 0.783795] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.792522] ACPI: SSDT 00000000bb68fd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.793402] ACPI: Dynamic OEM Table Load:
[ 0.793406] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.804201] ACPI: Interpreter enabled
[ 0.804205] ACPI: (supports S0 S3 S4 S5)
[ 0.804257] ACPI: Using IOAPIC for interrupt routing
[ 0.849935] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.849976] HEST: Table not found.
[ 0.849981] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.850483] \_SB_.PCI0:_OSC invalid UUID
[ 0.850485] _OSC request data:1 8 1f
[ 0.850491] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.851303] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.851307] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.851310] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.851314] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff]
[ 0.851331] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.851359] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.851386] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.851403] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.851413] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.851420] pci 0000:00:02.0: reg 20: [io 0x4078-0x407f]
[ 0.851502] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.851541] pci 0000:00:16.0: reg 10: [mem 0xd6407100-0xd640710f 64bit]
[ 0.851640] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.851646] pci 0000:00:16.0: PME# disabled
[ 0.851699] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.852258] pci 0000:00:1a.0: reg 10: [mem 0xd6406c00-0xd6406fff]
[ 0.855229] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.855236] pci 0000:00:1a.0: PME# disabled
[ 0.855279] pci 0000:00:1b.0: [8086:3b57] type 0 class 0x000403
[ 0.855306] pci 0000:00:1b.0: reg 10: [mem 0xd6400000-0xd6403fff 64bit]
[ 0.855401] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.855408] pci 0000:00:1b.0: PME# disabled
[ 0.855437] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.855538] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.855545] pci 0000:00:1c.0: PME# disabled
[ 0.855578] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 0.855681] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.855687] pci 0000:00:1c.1: PME# disabled
[ 0.855723] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[ 0.855820] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.855826] pci 0000:00:1c.2: PME# disabled
[ 0.855874] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.856391] pci 0000:00:1d.0: reg 10: [mem 0xd6406800-0xd6406bff]
[ 0.859390] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.859397] pci 0000:00:1d.0: PME# disabled
[ 0.859430] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.859523] pci 0000:00:1f.0: [8086:3b0f] type 0 class 0x000601
[ 0.859670] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[ 0.859702] pci 0000:00:1f.2: reg 10: [io 0x4058-0x405f]
[ 0.859717] pci 0000:00:1f.2: reg 14: [io 0x4084-0x4087]
[ 0.859732] pci 0000:00:1f.2: reg 18: [io 0x4050-0x4057]
[ 0.859746] pci 0000:00:1f.2: reg 1c: [io 0x4080-0x4083]
[ 0.859759] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f]
[ 0.859774] pci 0000:00:1f.2: reg 24: [mem 0xd6406000-0xd64067ff]
[ 0.859832] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.859838] pci 0000:00:1f.2: PME# disabled
[ 0.859865] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.859891] pci 0000:00:1f.3: reg 10: [mem 0xd6407000-0xd64070ff 64bit]
[ 0.859929] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
[ 0.859985] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.860020] pci 0000:00:1f.6: reg 10: [mem 0xd6404000-0xd6404fff 64bit]
[ 0.860190] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.860196] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.860202] pci 0000:00:1c.0: bridge window [mem 0xd5400000-0xd63fffff]
[ 0.860211] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.860413] pci 0000:02:00.0: [8086:0084] type 0 class 0x000280
[ 0.860528] pci 0000:02:00.0: reg 10: [mem 0xd4400000-0xd4401fff 64bit]
[ 0.861145] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.861182] pci 0000:02:00.0: PME# disabled
[ 0.861341] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.861348] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.861354] pci 0000:00:1c.1: bridge window [mem 0xd4400000-0xd53fffff]
[ 0.861363] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.861455] pci 0000:03:00.0: [1969:1073] type 0 class 0x000200
[ 0.861488] pci 0000:03:00.0: reg 10: [mem 0xd3400000-0xd343ffff 64bit]
[ 0.861506] pci 0000:03:00.0: reg 18: [io 0x1000-0x107f]
[ 0.861620] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.861626] pci 0000:03:00.0: PME# disabled
[ 0.861670] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.861676] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.861682] pci 0000:00:1c.2: bridge window [mem 0xd3400000-0xd43fffff]
[ 0.861691] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.861784] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.861791] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.861797] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.861807] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.861810] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.861813] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.861816] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.861819] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[ 0.861851] pci_bus 0000:00: on NUMA node 0
[ 0.861856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.862041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.862125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.862176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.862236] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.862371] \_SB_.PCI0:_OSC invalid UUID
[ 0.862374] _OSC request data:1 1f 1f
[ 0.862380] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.862425] \_SB_.PCI0:_OSC invalid UUID
[ 0.862427] _OSC request data:1 0 1d
[ 0.862431] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.872022] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.872095] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.872124] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.872153] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.872184] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.872211] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.872236] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.872276] pci_bus 0000:ff: on NUMA node 0
[ 0.872287] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.872290] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.872565] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.872626] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.872686] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.872746] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.872805] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.872867] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.872928] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.872987] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.873092] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.873104] vgaarb: loaded
[ 0.873188] SCSI subsystem initialized
[ 0.873234] usbcore: registered new interface driver usbfs
[ 0.873247] usbcore: registered new interface driver hub
[ 0.873297] usbcore: registered new device driver usb
[ 0.873502] wmi: Mapper loaded
[ 0.873504] PCI: Using ACPI for IRQ routing
[ 0.873507] PCI: pci_cache_line_size set to 64 bytes
[ 0.873606] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[ 0.873609] reserve RAM buffer: 00000000bb63f000 - 00000000bbffffff
[ 0.873612] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff
[ 0.873716] NetLabel: Initializing
[ 0.873718] NetLabel: domain hash size = 128
[ 0.873720] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.873735] NetLabel: unlabeled traffic allowed by default
[ 0.873779] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.873788] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.875820] Switching to clocksource hpet
[ 0.878854] Switched to NOHz mode on CPU #0
[ 0.878970] Switched to NOHz mode on CPU #1
[ 0.878986] Switched to NOHz mode on CPU #2
[ 0.878999] Switched to NOHz mode on CPU #3
[ 0.882089] pnp: PnP ACPI init
[ 0.882108] ACPI: bus type pnp registered
[ 0.882628] pnp 00:00: [bus 00-fe]
[ 0.882632] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.882634] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.882637] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.882640] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.882643] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.882645] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.882648] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.882650] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.882653] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.882655] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.882658] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.882660] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.882663] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.882665] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.882668] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.882670] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.882673] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.882676] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
[ 0.882678] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.882681] pnp 00:00: [io 0x0068-0x006f]
[ 0.882683] pnp 00:00: [io 0x0700-0x0707]
[ 0.882790] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.902601] pnp 00:01: [io 0x0000-0x001f]
[ 0.902604] pnp 00:01: [io 0x0081-0x0091]
[ 0.902606] pnp 00:01: [io 0x0093-0x009f]
[ 0.902608] pnp 00:01: [io 0x00c0-0x00df]
[ 0.902611] pnp 00:01: [dma 4]
[ 0.902648] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.902659] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.902693] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.902819] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.902854] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.902868] pnp 00:04: [io 0x00f0]
[ 0.902883] pnp 00:04: [irq 13]
[ 0.902917] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.902932] pnp 00:05: [io 0x002e-0x002f]
[ 0.902935] pnp 00:05: [io 0x004e-0x004f]
[ 0.902937] pnp 00:05: [io 0x0061]
[ 0.902939] pnp 00:05: [io 0x0063]
[ 0.902941] pnp 00:05: [io 0x0065]
[ 0.902943] pnp 00:05: [io 0x0067]
[ 0.902946] pnp 00:05: [io 0x0068-0x006f]
[ 0.902949] pnp 00:05: [io 0x0070]
[ 0.902951] pnp 00:05: [io 0x0080]
[ 0.902953] pnp 00:05: [io 0x0092]
[ 0.902955] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.902957] pnp 00:05: [io 0x0680-0x069f]
[ 0.902959] pnp 00:05: [io 0x0800-0x080f]
[ 0.902962] pnp 00:05: [io 0xffff]
[ 0.902964] pnp 00:05: [io 0xffff]
[ 0.902966] pnp 00:05: [io 0x0400-0x047f]
[ 0.902968] pnp 00:05: [io 0x0500-0x057f]
[ 0.902970] pnp 00:05: [io 0x164e-0x164f]
[ 0.902992] pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 7 [io 0x1000-0x1fff]
[ 0.903051] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.903055] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.903058] system 00:05: [io 0xffff] has been reserved
[ 0.903061] system 00:05: [io 0xffff] has been reserved
[ 0.903064] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.903067] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.903071] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.903082] pnp 00:06: [io 0x0070-0x0077]
[ 0.903090] pnp 00:06: [irq 8]
[ 0.903122] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.903148] pnp 00:07: [irq 12]
[ 0.903186] pnp 00:07: Plug and Play ACPI device, IDs SYN0729 SYN0700 SYN0002 PNP0f13 (active)
[ 0.903197] pnp 00:08: [io 0x0060]
[ 0.903200] pnp 00:08: [io 0x0064]
[ 0.903206] pnp 00:08: [irq 1]
[ 0.903241] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.903859] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.903862] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[ 0.903865] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 0.903867] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 0.903869] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.903872] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.903874] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.903877] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 0.903879] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.903882] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 0.903884] pnp 00:09: [mem 0xd6500000-0xd6500fff]
[ 0.903961] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.903965] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.903968] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.903971] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.903975] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.903978] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.903981] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.903985] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.903988] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.903992] system 00:09: [mem 0xd6500000-0xd6500fff] has been reserved
[ 0.903996] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.904180] pnp 00:0a: [bus ff]
[ 0.904233] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.904256] pnp: PnP ACPI: found 11 devices
[ 0.904258] ACPI: ACPI bus type pnp unregistered
[ 0.910318] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.910324] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.910332] pci 0000:00:1c.0: bridge window [mem 0xd5400000-0xd63fffff]
[ 0.910339] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.910349] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.910354] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.910361] pci 0000:00:1c.1: bridge window [mem 0xd4400000-0xd53fffff]
[ 0.910368] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.910378] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.910383] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.910390] pci 0000:00:1c.2: bridge window [mem 0xd3400000-0xd43fffff]
[ 0.910396] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.910406] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.910409] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.910416] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.910422] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.910449] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.910457] pci 0000:00:1c.0: setting latency timer to 64
[ 0.910471] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.910477] pci 0000:00:1c.1: setting latency timer to 64
[ 0.910493] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.910500] pci 0000:00:1c.2: setting latency timer to 64
[ 0.910511] pci 0000:00:1e.0: setting latency timer to 64
[ 0.910517] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.910520] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.910523] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.910525] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[ 0.910529] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.910531] pci_bus 0000:01: resource 1 [mem 0xd5400000-0xd63fffff]
[ 0.910534] pci_bus 0000:01: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.910537] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.910540] pci_bus 0000:02: resource 1 [mem 0xd4400000-0xd53fffff]
[ 0.910543] pci_bus 0000:02: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.910546] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.910549] pci_bus 0000:03: resource 1 [mem 0xd3400000-0xd43fffff]
[ 0.910552] pci_bus 0000:03: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.910555] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.910558] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.910560] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.910563] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfeafffff]
[ 0.910607] NET: Registered protocol family 2
[ 0.910691] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.911134] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.912660] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.913067] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.913071] TCP reno registered
[ 0.913075] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.913102] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.913281] NET: Registered protocol family 1
[ 0.913305] pci 0000:00:02.0: Boot video device
[ 0.939236] PCI: CLS 64 bytes, default 64
[ 0.939304] Trying to unpack rootfs image as initramfs...
[ 1.367266] Freeing initrd memory: 16536k freed
[ 1.372375] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.372383] Placing 64MB software IO TLB between ffff8800b763b000 - ffff8800bb63b000
[ 1.372386] software IO TLB at phys 0xb763b000 - 0xbb63b000
[ 1.372434] Simple Boot Flag at 0x44 set to 0x1
[ 1.373063] audit: initializing netlink socket (disabled)
[ 1.373087] type=2000 audit(1306163725.056:1): initialized
[ 1.395351] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.397498] VFS: Disk quotas dquot_6.5.2
[ 1.397559] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.397653] msgmni has been set to 7508
[ 1.397928] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.397932] io scheduler noop registered
[ 1.397934] io scheduler deadline registered (default)
[ 1.398258] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.398284] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.398304] intel_idle: MWAIT substates: 0x1120
[ 1.398306] intel_idle: v0.4 model 0x25
[ 1.398308] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.398624] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.398859] ACPI: AC Adapter [ACAD] (on-line)
[ 1.398976] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:10/PNP0C0C:00/input/input0
[ 1.398984] ACPI: Power Button [PWRB]
[ 1.399027] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:10/PNP0C0E:00/input/input1
[ 1.399031] ACPI: Sleep Button [SLPB]
[ 1.399111] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:10/PNP0C0D:00/input/input2
[ 1.399210] ACPI: Lid Switch [LID0]
[ 1.399294] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.399318] ACPI: Power Button [PWRF]
[ 1.399583] ACPI: acpi_idle yielding to intel_idle
[ 1.423565] ACPI: Invalid active0 threshold
[ 1.423656] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.423659] ACPI: Thermal Zone [TZ00] (27 C)
[ 1.423673] ERST: Table is not found!
[ 1.423746] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.513839] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.513847] ACPI: Battery Slot [BAT1] (battery present)
[ 1.513985] Linux agpgart interface v0.103
[ 1.514086] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.514231] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.515286] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.515488] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.516622] brd: module loaded
[ 1.517139] loop: module loaded
[ 1.517533] Fixed MDIO Bus: probed
[ 1.517624] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.517651] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.517677] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.517682] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.517719] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.517756] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.521675] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.521700] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd6406c00
[ 1.535118] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.535268] hub 1-0:1.0: USB hub found
[ 1.535274] hub 1-0:1.0: 3 ports detected
[ 1.535360] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.535377] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.535381] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.535421] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.535452] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.539339] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.539356] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd6406800
[ 1.551761] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.551909] hub 2-0:1.0: USB hub found
[ 1.551914] hub 2-0:1.0: 3 ports detected
[ 1.551979] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.551991] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.552073] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 1.593728] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.593737] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.593848] mousedev: PS/2 mouse device common for all mice
[ 1.595892] rtc_cmos 00:06: RTC can wake from S4
[ 1.595996] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.596029] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.596094] device-mapper: uevent: version 1.0.3
[ 1.596158] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.596252] device-mapper: multipath: version 1.3.0 loaded
[ 1.596256] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.596425] cpuidle: using governor ladder
[ 1.596604] cpuidle: using governor menu
[ 1.596872] TCP cubic registered
[ 1.596968] NET: Registered protocol family 10
[ 1.597515] NET: Registered protocol family 17
[ 1.597532] Registering the dns_resolver key type
[ 1.597633] PM: Hibernation image not present or could not be loaded.
[ 1.598317] Magic number: 11:33:286
[ 1.598527] rtc_cmos 00:06: setting system clock to 2011-05-23 15:15:25 UTC (1306163725)
[ 1.600585] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.600587] EDD information not available.
[ 1.602488] Freeing unused kernel memory: 760k freed
[ 1.602632] Write protecting the kernel read-only data: 10240k
[ 1.609045] Freeing unused kernel memory: 1480k freed
[ 1.617503] Freeing unused kernel memory: 2024k freed
[ 1.633259] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.640916] udev[75]: starting version 167
[ 1.667748] atl1c 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.667767] atl1c 0000:03:00.0: setting latency timer to 64
[ 1.676279] [drm] Initialized drm 1.1.0 20060810
[ 1.680945] libata version 3.00 loaded.
[ 1.682496] ahci 0000:00:1f.2: version 3.0
[ 1.682533] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.682623] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.682678] ahci: SSS flag set, parallel bus scan disabled
[ 1.682721] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
[ 1.682727] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag led clo pio slum part ems apst
[ 1.682738] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.684300] scsi0 : ahci
[ 1.684786] scsi1 : ahci
[ 1.684891] scsi2 : ahci
[ 1.685038] scsi3 : ahci
[ 1.685773] scsi4 : ahci
[ 1.687941] scsi5 : ahci
[ 1.688053] ata1: SATA max UDMA/133 abar m2048@0xd6406000 port 0xd6406100 irq 40
[ 1.688059] ata2: DUMMY
[ 1.688062] ata3: DUMMY
[ 1.688065] ata4: DUMMY
[ 1.688067] ata5: DUMMY
[ 1.688070] ata6: DUMMY
[ 1.688155] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.688164] i915 0000:00:02.0: setting latency timer to 64
[ 1.762211] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[ 1.762219] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.762221] [drm] Driver supports precise vblank timestamp query.
[ 1.782340] atl1c 0000:03:00.0: version 1.0.1.0-NAPI
[ 1.841465] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.965544] hub 1-1:1.0: USB hub found
[ 1.965653] hub 1-1:1.0: 6 ports detected
[ 1.982632] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.004706] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.005846] ata1.00: ATA-8: HITACHI HTS543232A7A384, ES2ZB90A, max UDMA/100
[ 2.005851] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.007068] ata1.00: configured for UDMA/100
[ 2.007352] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54323 ES2Z PQ: 0 ANSI: 5
[ 2.007621] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.007688] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.007840] sd 0:0:0:0: [sda] Write Protect is off
[ 2.007867] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.007939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.008290] sda: detected capacity change from 0 to 320072933376
[ 2.037950] sda: sda1 sda2 < sda5 sda6 >
[ 2.038448] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.071269] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 2.134468] [drm] GMBUS timed out, falling back to bit banging on pin 4 [i915 gmbus dpc]
[ 2.156122] fbcon: inteldrmfb (fb0) is primary device
[ 2.195270] hub 2-1:1.0: USB hub found
[ 2.195343] hub 2-1:1.0: 8 ports detected
[ 2.277831] usb 1-1.4: new full speed USB device number 3 using ehci_hcd
[ 2.316030] Console: switching to colour frame buffer device 170x48
[ 2.319374] fb0: inteldrmfb frame buffer device
[ 2.319376] drm: registered panic notifier
[ 2.337385] acpi device:02: registered as cooling_device4
[ 2.337795] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 2.337872] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.337949] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.374186] Refined TSC clocksource calibration: 1329.999 MHz.
[ 2.374204] Switching to clocksource tsc
[ 2.460924] usb 2-1.3: new high speed USB device number 3 using ehci_hcd
[ 2.817938] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 14.292076] Adding 7999484k swap on /dev/sda5. Priority:-1 extents:1 across:7999484k
[ 14.318351] udev[353]: starting version 167
[ 14.471971] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 11, expected 14)
[ 14.472009] intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 14.473303] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 14.506513] lp: driver loaded but no devices found
[ 14.605809] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6
[ 14.671769] Linux video capture interface: v2.00
[ 14.699048] Bluetooth: Core ver 2.16
[ 14.699085] NET: Registered protocol family 31
[ 14.699089] Bluetooth: HCI device and connection manager initialized
[ 14.699093] Bluetooth: HCI socket layer initialized
[ 14.718845] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0195)
[ 14.723102] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input7
[ 14.723296] usbcore: registered new interface driver uvcvideo
[ 14.723300] USB Video Class driver (v1.0.0)
[ 14.723651] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 14.723892] usbcore: registered new interface driver btusb
[ 14.749729] cfg80211: Calling CRDA to update world regulatory domain
[ 14.930587] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 14.930593] iwlagn: Copyright(c) 2003-2011 Intel Corporation
[ 14.930939] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.930949] iwlagn 0000:02:00.0: setting latency timer to 64
[ 14.930988] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 14.947108] cfg80211: World regulatory domain updated:
[ 14.947112] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.947116] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.947120] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.947123] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.947126] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.947131] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.950675] iwlagn 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6
[ 14.950679] iwlagn 0000:02:00.0: Device SKU: 0X9
[ 14.950681] iwlagn 0000:02:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[ 14.950691] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 14.950778] iwlagn 0000:02:00.0: irq 42 for MSI/MSI-X
[ 14.984536] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 14.984547] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 14.984578] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.984675] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 14.984720] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.984944] iwlagn 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138
[ 14.985280] Registered led device: phy0-led
[ 15.059502] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 15.123548] hda_codec: ALC269VB: BIOS auto-probing.
[ 15.140898] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.141014] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.146909] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 15.530580] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 16.084157] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 16.126527] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.158616] atl1c 0000:03:00.0: irq 44 for MSI/MSI-X
[ 16.193912] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 16.238374] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.898667] ppdev: user-space parallel port driver
[ 17.724357] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 17.726945] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 33.076729] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 33.083202] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 56.874971] fuse init (API version 7.16)
[ 85.946451] wlan%d: authenticate with 98:fc:11:8e:c9:ea (try 1)
[ 85.949242] wlan%d: authenticated
[ 85.949389] wlan%d: waiting for beacon from 98:fc:11:8e:c9:ea
[ 86.007151] wlan%d: beacon received
[ 86.036807] wlan%d: associate with 98:fc:11:8e:c9:ea (try 1)
[ 86.040213] wlan%d: RX AssocResp from 98:fc:11:8e:c9:ea (capab=0x411 status=0 aid=6)
[ 86.040225] wlan%d: associated
[ 86.045110] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 86.479671] Intel AES-NI instructions are not detected.
[ 86.555302] padlock_aes: VIA PadLock not detected.
[ 96.483988] wlan0: no IPv6 routers present
[ 1863.102058] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 2
[ 2131.822161] iwlagn 0000:02:00.0: iwlagn_tx_agg_start on ra = 98:fc:11:8e:c9:ea tid = 0
[ 7958.806306] wlan%d: deauthenticated from 98:fc:11:8e:c9:ea (Reason: 7)
[ 7958.811375] iwlagn 0000:02:00.0: Stopping AGG while state not ON or starting
[ 7958.837072] cfg80211: Calling CRDA to update world regulatory domain
[ 7958.844191] cfg80211: World regulatory domain updated:
[ 7958.844200] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7958.844209] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7958.844218] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7958.844225] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7958.844233] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7958.844240] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7964.889363] wlan%d: authenticate with 98:fc:11:8e:c9:ea (try 1)
[ 7964.892254] wlan%d: authenticated
[ 7964.892403] wlan%d: waiting for beacon from 98:fc:11:8e:c9:ea
[ 7964.913451] wlan%d: beacon received
[ 7964.917833] wlan%d: associate with 98:fc:11:8e:c9:ea (try 1)
[ 7964.921102] wlan%d: RX AssocResp from 98:fc:11:8e:c9:ea (capab=0x411 status=0 aid=6)
[ 7964.921115] wlan%d: associated
[ 9054.270670] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 0
[10851.808791] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 1
[12055.147786] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 0
[12062.068790] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 0
[12069.092474] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 0
[12077.387109] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 0
[12184.286708] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 1
[12188.576867] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 2
[12193.310005] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 5
[12196.399039] iwlagn 0000:02:00.0: iwlagn_tx_agg_start on ra = 98:fc:11:8e:c9:ea tid = 0
[13718.430495] exe (5524): /proc/5524/oom_adj is deprecated, please use /proc/5524/oom_score_adj instead.
[14396.777039] perf[11375]: segfault at fffffffffffffff8 ip 0000000000418efd sp 00007fffbbffd770 error 4 in perf[400000+91000]
[16735.144852] process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
[18064.447939] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[18070.988616] keyboard: can't emulate rawmode for keycode 240
[18070.988638] keyboard: can't emulate rawmode for keycode 240
[18071.661562] wlan%d: deauthenticating from 98:fc:11:8e:c9:ea by local choice (reason=3)
[18071.736637] cfg80211: Calling CRDA to update world regulatory domain
[18071.898292] cfg80211: World regulatory domain updated:
[18071.898299] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[18071.898303] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[18071.898307] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[18071.898310] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[18071.898314] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[18071.898318] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[18074.082863] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[18074.088451] EXT4-fs (sda1): re-mounted. Opts: commit=0
[18075.903057] PM: Syncing filesystems ... done.
[18075.930608] PM: Preparing system for mem sleep
[18076.041579] Freezing user space processes ... (elapsed 0.01 seconds) done.
[18076.054682] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[18076.067989] PM: Entering mem sleep
[18076.068104] Suspending console(s) (use no_console_suspend to debug)
[18076.068847] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[18076.069063] sd 0:0:0:0: [sda] Stopping disk
[18076.201144] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[18076.201260] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[18076.394581] HDA Intel 0000:00:1b.0: PCI INT A disabled
[18076.407593] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
[18076.597445] PM: suspend of devices complete after 529.629 msecs
[18076.650659] PM: late suspend of devices complete after 53.275 msecs
[18076.650918] ACPI: Preparing to enter system sleep state S3
[18076.667422] PM: Saving platform NVS memory
[18076.672054] Disabling non-boot CPUs ...
[18076.674200] CPU 1 is now offline
[18076.777106] CPU 2 is now offline
[18076.778443] Broke affinity for irq 1
[18076.778472] Broke affinity for irq 23
[18076.880313] CPU 3 is now offline
[18076.880851] Extended CMOS year: 2000
[18076.881113] ACPI: Low-level resume complete
[18076.881191] PM: Restoring platform NVS memory
[18076.881892] Extended CMOS year: 2000
[18076.881942] Enabling non-boot CPUs ...
[18076.882074] Booting Node 0 Processor 1 APIC 0x1
[18076.882077] smpboot cpu 1: start_ip = 98000
[18076.995017] NMI watchdog enabled, takes one hw-pmu counter.
[18076.995711] CPU1 is up
[18076.995997] Booting Node 0 Processor 2 APIC 0x4
[18076.995999] smpboot cpu 2: start_ip = 98000
[18076.997793] Switched to NOHz mode on CPU #1
[18077.108342] NMI watchdog enabled, takes one hw-pmu counter.
[18077.108806] CPU2 is up
[18077.108945] Booting Node 0 Processor 3 APIC 0x5
[18077.108948] smpboot cpu 3: start_ip = 98000
[18077.110989] Switched to NOHz mode on CPU #2
[18077.221706] NMI watchdog enabled, takes one hw-pmu counter.
[18077.222242] CPU3 is up
[18077.224749] Switched to NOHz mode on CPU #3
[18077.225246] ACPI: Waking up from system sleep state S3
[18077.274409] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[18077.274463] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[18077.274518] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[18077.274579] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[18077.274630] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20003030, writing 0x3030)
[18077.274825] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[18077.274863] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[18077.274972] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[18077.275138] iwlagn 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[18077.275174] iwlagn 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd4400004)
[18077.275183] iwlagn 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[18077.275193] iwlagn 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[18077.275477] PM: early resume of devices complete after 1.145 msecs
[18077.275634] i915 0000:00:02.0: setting latency timer to 64
[18077.275640] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[18077.275649] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[18077.275719] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[18077.275727] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[18077.275741] pci 0000:00:1e.0: setting latency timer to 64
[18077.275761] ahci 0000:00:1f.2: setting latency timer to 64
[18077.275924] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[18077.275933] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[18077.275944] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[18077.275953] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[18077.275963] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[18077.275974] HDA Intel 0000:00:1b.0: setting latency timer to 64
[18077.276045] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[18077.276454] sd 0:0:0:0: [sda] Starting disk
[18077.461618] Extended CMOS year: 2000
[18077.527605] usb 2-1.3: reset high speed USB device number 3 using ehci_hcd
[18077.677442] usb 1-1.4: reset full speed USB device number 3 using ehci_hcd
[18077.762746] btusb 1-1.4:1.0: no reset_resume for driver btusb?
[18077.762755] btusb 1-1.4:1.1: no reset_resume for driver btusb?
[18079.831142] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18079.833510] ata1.00: configured for UDMA/100
[18079.850609] PM: resume of devices complete after 2578.167 msecs
[18079.850984] PM: Finishing wakeup.
[18079.850987] Restarting tasks ... done.
[18079.924342] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
[18079.942332] video LNXVIDEO:00: Restoring backlight state
[18079.992367] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[18080.014060] hub 1-1.2:1.0: USB hub found
[18080.014519] hub 1-1.2:1.0: 4 ports detected
[18080.280951] usb 1-1.2.3: new high speed USB device number 5 using ehci_hcd
[18080.358466] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18080.362743] atl1c 0000:03:00.0: irq 44 for MSI/MSI-X
[18080.441957] ADDRCONF(NETDEV_UP): eth0: link is not ready
[18080.558631] Initializing USB Mass Storage driver...
[18080.558864] scsi6 : usb-storage 1-1.2.3:1.0
[18080.559087] usbcore: registered new interface driver usb-storage
[18080.559091] USB Mass Storage support registered.
[18081.562052] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084D TS01 PQ: 0 ANSI: 0
[18081.571762] sr0: scsi3-mmc drive: 31x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[18081.571770] cdrom: Uniform CD-ROM driver Revision: 3.20
[18081.572208] sr 6:0:0:0: Attached scsi CD-ROM sr0
[18081.573905] sr 6:0:0:0: Attached scsi generic sg1 type 5
[18081.629060] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[18081.634699] EXT4-fs (sda1): re-mounted. Opts: commit=0
[18081.994906] wlan%d: authenticate with 98:fc:11:8e:c9:ea (try 1)
[18081.997762] wlan%d: authenticated
[18081.998035] wlan%d: associate with 98:fc:11:8e:c9:ea (try 1)
[18082.001248] wlan%d: RX AssocResp from 98:fc:11:8e:c9:ea (capab=0x411 status=0 aid=2)
[18082.001254] wlan%d: associated
[18082.007345] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[18092.439263] wlan0: no IPv6 routers present
[18141.304612] UDF-fs: Partition marked readonly; forcing readonly mount
[18141.351521] UDF-fs INFO UDF: Mounting volume 'THE_OTHER_GUYS', timestamp 2010/10/23 02:04 (1f10)
[18143.437130] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[18143.437149] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current]
[18143.437165] sr 6:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[18143.437186] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 36 11 e8 00 00 08 00 00 00
[18143.437222] end_request: I/O error, dev sr0, sector 14174112
[18143.437236] Buffer I/O error on device sr0, logical block 3543528
[18143.437249] Buffer I/O error on device sr0, logical block 3543529
[18143.437265] Buffer I/O error on device sr0, logical block 3543530
[18143.437275] Buffer I/O error on device sr0, logical block 3543531
[18143.437285] Buffer I/O error on device sr0, logical block 3543532
[18143.437294] Buffer I/O error on device sr0, logical block 3543533
[18143.437304] Buffer I/O error on device sr0, logical block 3543534
[18143.437313] Buffer I/O error on device sr0, logical block 3543535
[18143.918185] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[18143.918201] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current]
[18143.918213] sr 6:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[18143.918229] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 33 aa 00 00 3c 00 00 00
[18143.918256] end_request: I/O error, dev sr0, sector 577192
[18143.918268] Buffer I/O error on device sr0, logical block 144298
[18143.918277] Buffer I/O error on device sr0, logical block 144299
[18143.987862] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[18143.987875] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current]
[18143.987887] sr 6:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[18143.987901] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 33 e6 00 00 04 00 00 00
[18143.987927] end_request: I/O error, dev sr0, sector 577432
[18144.056791] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[18144.056806] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current]
[18144.056818] sr 6:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[18144.056834] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 33 ea 00 00 3c 00 00 00
[18144.056862] end_request: I/O error, dev sr0, sector 577448
[18144.105364] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[18144.105450] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current]
[18144.105458] sr 6:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[18144.105469] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 34 26 00 00 04 00 00 00
[18144.105493] end_request: I/O error, dev sr0, sector 577688
[18144.469042] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[18144.469057] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current]
[18144.469069] sr 6:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[18144.469086] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 2d 89 24 00 00 10 00 00 00
[18144.469113] end_request: I/O error, dev sr0, sector 11936912
[18145.490797] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[18145.490811] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current]
[18145.490824] sr 6:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[18145.490840] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 2d 89 90 00 00 02 00 00 00
[18145.490868] end_request: I/O error, dev sr0, sector 11937344
[18145.538425] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[18145.538438] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current]
[18145.538450] sr 6:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[18145.538465] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 2d 89 90 00 00 02 00 00 00
[18145.538491] end_request: I/O error, dev sr0, sector 11937344
[18145.862109] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[18145.862118] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current]
[18145.862124] sr 6:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[18145.862133] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 b3 fe 00 00 08 00 00 00
[18145.862147] end_request: I/O error, dev sr0, sector 708600
[18145.931049] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[18145.931056] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current]
[18145.931062] sr 6:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[18145.931070] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 b3 fe 00 00 02 00 00 00
[18145.931083] end_request: I/O error, dev sr0, sector 708600
[18146.000117] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[18146.000130] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current]
[18146.000142] sr 6:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[18146.000157] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 b3 fe 00 00 02 00 00 00
[18146.000183] end_request: I/O error, dev sr0, sector 708600
[18221.328750] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 0
[18225.972918] iwlagn 0000:02:00.0: iwlagn_tx_agg_start on ra = 98:fc:11:8e:c9:ea tid = 0
[18387.361455] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18275, limit 18000
[18449.216351] ACPI: Failed to switch the brightness
[18449.755974] ACPI: Failed to switch the brightness
[18450.188179] ACPI: Failed to switch the brightness
[18450.395348] ACPI: Failed to switch the brightness
[18450.615398] ACPI: Failed to switch the brightness
[18450.791131] ACPI: Failed to switch the brightness
[18451.005950] ACPI: Failed to switch the brightness
[18451.191396] ACPI: Failed to switch the brightness
[18451.367185] ACPI: Failed to switch the brightness
[18453.353965] ACPI: Failed to switch the brightness
[18454.079110] ACPI: Failed to switch the brightness
[18454.945659] ACPI: Failed to switch the brightness
[18668.950279] usb 1-1.2: USB disconnect, device number 4
[18668.950290] usb 1-1.2.3: USB disconnect, device number 5
[18674.215261] kbd_keycode: 158 callbacks suppressed
[18674.215266] keyboard: can't emulate rawmode for keycode 240
[18674.215281] keyboard: can't emulate rawmode for keycode 240
[18674.631803] wlan%d: deauthenticating from 98:fc:11:8e:c9:ea by local choice (reason=3)
[18674.705696] cfg80211: Calling CRDA to update world regulatory domain
[18674.711376] cfg80211: World regulatory domain updated:
[18674.711383] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[18674.711388] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[18674.711393] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[18674.711397] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[18674.711401] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[18674.711406] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[18676.395574] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[18676.401587] EXT4-fs (sda1): re-mounted. Opts: commit=0
[18677.371316] PM: Syncing filesystems ... done.
[18677.399215] PM: Preparing system for mem sleep
[18677.515818] Freezing user space processes ... (elapsed 0.01 seconds) done.
[18677.528903] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[18677.542110] PM: Entering mem sleep
[18677.542248] Suspending console(s) (use no_console_suspend to debug)
[18677.555929] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[18677.556073] sd 0:0:0:0: [sda] Stopping disk
[18677.688596] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[18677.688604] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[18677.778723] HDA Intel 0000:00:1b.0: PCI INT A disabled
[18677.791842] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
[18678.064907] PM: suspend of devices complete after 510.083 msecs
[18678.118137] PM: late suspend of devices complete after 53.289 msecs
[18678.118400] ACPI: Preparing to enter system sleep state S3
[18678.134900] PM: Saving platform NVS memory
[18678.139388] Disabling non-boot CPUs ...
[18678.141817] CPU 1 is now offline
[18678.244590] CPU 2 is now offline
[18678.245801] Broke affinity for irq 12
[18678.347819] CPU 3 is now offline
[18678.348407] Extended CMOS year: 2000
[18678.348683] ACPI: Low-level resume complete
[18678.348762] PM: Restoring platform NVS memory
[18678.349470] Extended CMOS year: 2000
[18678.349521] Enabling non-boot CPUs ...
[18678.349653] Booting Node 0 Processor 1 APIC 0x1
[18678.349656] smpboot cpu 1: start_ip = 98000
[18678.462607] NMI watchdog enabled, takes one hw-pmu counter.
[18678.463303] CPU1 is up
[18678.463568] Booting Node 0 Processor 2 APIC 0x4
[18678.463570] smpboot cpu 2: start_ip = 98000
[18678.465293] Switched to NOHz mode on CPU #1
[18678.575788] NMI watchdog enabled, takes one hw-pmu counter.
[18678.576259] CPU2 is up
[18678.576531] Booting Node 0 Processor 3 APIC 0x5
[18678.576537] smpboot cpu 3: start_ip = 98000
[18678.578490] Switched to NOHz mode on CPU #2
[18678.689084] NMI watchdog enabled, takes one hw-pmu counter.
[18678.689609] CPU3 is up
[18678.692117] Switched to NOHz mode on CPU #3
[18678.692610] ACPI: Waking up from system sleep state S3
[18678.748512] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[18678.748618] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[18678.748679] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[18678.748923] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[18678.748959] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[18678.749064] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[18678.749230] iwlagn 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[18678.749266] iwlagn 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd4400004)
[18678.749275] iwlagn 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[18678.749286] iwlagn 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
[18678.749572] PM: early resume of devices complete after 1.141 msecs
[18678.749697] i915 0000:00:02.0: setting latency timer to 64
[18678.749912] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[18678.749920] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[18678.750017] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[18678.750025] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[18678.750036] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[18678.750041] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[18678.750050] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[18678.750059] HDA Intel 0000:00:1b.0: setting latency timer to 64
[18678.750134] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[18678.750181] ahci 0000:00:1f.2: setting latency timer to 64
[18678.750314] pci 0000:00:1e.0: setting latency timer to 64
[18678.750320] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[18678.750331] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[18678.750515] sd 0:0:0:0: [sda] Starting disk
[18678.934823] Extended CMOS year: 2000
[18678.998282] usb 2-1.3: reset high speed USB device number 3 using ehci_hcd
[18679.148146] usb 1-1.4: reset full speed USB device number 3 using ehci_hcd
[18679.233502] btusb 1-1.4:1.0: no reset_resume for driver btusb?
[18679.233511] btusb 1-1.4:1.1: no reset_resume for driver btusb?
[18681.252038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18681.254366] ata1.00: configured for UDMA/100
[18681.272264] PM: resume of devices complete after 2525.643 msecs
[18681.272729] PM: Finishing wakeup.
[18681.272732] Restarting tasks ... done.
[18681.357654] video LNXVIDEO:00: Restoring backlight state
[18681.372073] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[18681.787673] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18681.789999] atl1c 0000:03:00.0: irq 44 for MSI/MSI-X
[18681.868857] ADDRCONF(NETDEV_UP): eth0: link is not ready
[18682.256362] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[18682.256535] IP: [<ffffffff811d6503>] __elv_add_request+0x1e3/0x270
[18682.256603] PGD 0
[18682.256632] Oops: 0002 [#1] SMP
[18682.256686] CPU 2
[18682.256714] Modules linked in: nls_utf8 udf crc_itu_t usb_storage cryptd aes_x86_64 aes_generic fuse parport_pc ppdev dm_crypt kvm_intel joydev kvm binfmt_misc snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwlagn snd_hwdep snd_pcm mac80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd cfg80211 soundcore btusb uvcvideo snd_page_alloc bluetooth videodev v4l2_compat_ioctl32 psmouse ideapad_laptop serio_raw sparse_keymap lp intel_ips mac_hid parport ext4 mbcache jbd2 i915 ahci libahci libata drm_kms_helper drm i2c_algo_bit cfbcopyarea video cfbimgblt cfbfillrect atl1c
[18682.257659]
[18682.257685] Pid: 14069, comm: xdg-screensaver Not tainted 2.6.39+ #4 LENOVO 0876 /Base Board Product Name
[18682.257845] RIP: 0010:[<ffffffff811d6503>] [<ffffffff811d6503>] __elv_add_request+0x1e3/0x270
[18682.257964] RSP: 0018:ffff88009b3a19e8 EFLAGS: 00010006
[18682.258056] RAX: 0000000000000000 RBX: ffff880131559020 RCX: 0000000000000001
[18682.258152] RDX: 0000000000000001 RSI: ffff880131559020 RDI: ffff8801315f77d0
[18682.258248] RBP: ffff88009b3a1a08 R08: ffffffff811e1000 R09: ffff8801315f77d0
[18682.258343] R10: ffff8800b5085e40 R11: ffff8800b5085e40 R12: ffff8801315f77d0
[18682.258437] R13: 0000000000000001 R14: 0000000000000001 R15: ffff8800b5085e40
[18682.258529] FS: 0000000000000000(0000) GS:ffff880137c80000(0000) knlGS:0000000000000000
[18682.258636] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[18682.258712] CR2: 0000000000000008 CR3: 0000000001a03000 CR4: 00000000000006e0
[18682.258807] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[18682.258898] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[18682.258994] Process xdg-screensaver (pid: 14069, threadinfo ffff88009b3a0000, task ffff8800aff096b0)
[18682.259112] Stack:
[18682.259140] ffff8801315f77d0 ffff880131559020 0000000000000001 ffff88009b3a1c48
[18682.259249] ffff88009b3a1a38 ffffffff811e10a0 0000000000000000 ffff88009b3a1a48
[18682.259354] ffff880131559020 0000000000000000 ffff88009b3a1af8 ffffffff811e118e
[18682.259460] Call Trace:
[18682.259504] [<ffffffff811e10a0>] blk_execute_rq_nowait+0x60/0xc0
[18682.259587] [<ffffffff811e118e>] blk_execute_rq+0x8e/0x130
[18682.259668] [<ffffffff812db5bc>] scsi_execute+0xfc/0x160
[18682.259742] [<ffffffff812dc18f>] scsi_execute_req+0xbf/0x130
[18682.259821] [<ffffffff812d5c71>] ioctl_internal_command.clone.4+0x61/0x1b0
[18682.259914] [<ffffffff812d5e3e>] scsi_set_medium_removal+0x7e/0xb0
[18682.260000] [<ffffffff812ecfa0>] sr_lock_door+0x20/0x30
[18682.260075] [<ffffffff812f9da7>] cdrom_release+0x147/0x270
[18682.260153] [<ffffffff812ebac8>] sr_block_release+0x38/0x60
[18682.260233] [<ffffffff811730ac>] __blkdev_put+0x16c/0x1b0
[18682.260308] [<ffffffff81173129>] blkdev_put+0x39/0x150
[18682.260379] [<ffffffff81173264>] blkdev_close+0x24/0x30
[18682.260455] [<ffffffff81140fba>] fput+0xea/0x220
[18682.260521] [<ffffffff8113d396>] filp_close+0x66/0x90
[18682.260592] [<ffffffff8105c117>] put_files_struct+0x87/0xf0
[18682.260668] [<ffffffff8105c244>] exit_files+0x54/0x70
[18682.264275] [<ffffffff8105c72b>] do_exit+0x16b/0x860
[18682.267802] [<ffffffff811f6c2a>] ? trace_hardirqs_off_thunk+0x3a/0x6c
[18682.271512] [<ffffffff8105d0e8>] do_group_exit+0x58/0xd0
[18682.276948] [<ffffffff8105d177>] sys_exit_group+0x17/0x20
[18682.281121] [<ffffffff81485d42>] system_call_fastpath+0x16/0x1b
[18682.284603] Code: ff ff e9 90 fe ff ff 90 81 4b 40 00 08 00 00 48 89 df e8 c1 93 00 00 eb c1 0f 1f 80 00 00 00 00 81 4b 40 00 08 00 00 49 8b 04 24
[18682.284903] 89 58 08 48 89 03 4c 89 63 08 49 89 1c 24 eb 9e 0f 1f 40 00
[18682.290727] RIP [<ffffffff811d6503>] __elv_add_request+0x1e3/0x270
[18682.293189] RSP <ffff88009b3a19e8>
[18682.296075] CR2: 0000000000000008
[18682.358582] ---[ end trace 82dd699fdeb50b72 ]---
[18682.358587] Fixing recursive fault but reboot is needed!
[18683.171429] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=600
[18683.177875] EXT4-fs (sda1): re-mounted. Opts: commit=600
[18683.222874] wlan%d: authenticate with 98:fc:11:8e:c9:ea (try 1)
[18683.225750] wlan%d: authenticated
[18683.225948] wlan%d: associate with 98:fc:11:8e:c9:ea (try 1)
[18683.229308] wlan%d: RX AssocResp from 98:fc:11:8e:c9:ea (capab=0x411 status=0 aid=2)
[18683.229324] wlan%d: associated
[18683.236596] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[18684.010470] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=600
[18684.014968] EXT4-fs (sda1): re-mounted. Opts: commit=600
[18694.226375] wlan0: no IPv6 routers present
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: __elv_add_request OOPS
2011-05-24 4:29 __elv_add_request OOPS Parag Warudkar
@ 2011-05-24 10:44 ` Jens Axboe
0 siblings, 0 replies; 47+ messages in thread
From: Jens Axboe @ 2011-05-24 10:44 UTC (permalink / raw)
To: Parag Warudkar; +Cc: linux-kernel, James.Bottomley, Linux SCSI List
On 2011-05-24 06:29, Parag Warudkar wrote:
>
> External DVD drive - connected when suspended, removed before resume.
> Results in NULL pointer dereference in __blk_add_request on resume.
>
> *ffffffff811d6503: 48 89 58 08 mov %rbx,0x8(%rax) |
> %ebx = ffff880131559020 <--- faulting instruction
>
> 48 89 58 08 appears only in list_add :
>
> static inline void list_add(struct list_head *new, struct list_head *head)
> {
> __list_add(new, head, head->next);
> ffffffff81ac012c: 49 8b 04 24 mov (%r12),%rax
> #ifndef CONFIG_DEBUG_LIST
> static inline void __list_add(struct list_head *new,
> struct list_head *prev,
> struct list_head *next)
> {
> next->prev = new;
> ffffffff81ac0130: 48 89 58 08 mov %rbx,0x8(%rax)
>
> AFAICS list_add is only called from one place in __elv_add_request :
>
> switch (where) {
> case ELEVATOR_INSERT_REQUEUE:
> case ELEVATOR_INSERT_FRONT:
> rq->cmd_flags |= REQ_SOFTBARRIER;
> ** list_add(&rq->queuelist, &q->queue_head);
> break;
>
> Now, where is the patch? :)
You forgot to attach it?
This is clearly q == NULL, CC'ing James/linux-scsi. Oops left below.
> [18682.256362] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
> [18682.256535] IP: [<ffffffff811d6503>] __elv_add_request+0x1e3/0x270
> [18682.256603] PGD 0
> [18682.256632] Oops: 0002 [#1] SMP
> [18682.256686] CPU 2
> [18682.256714] Modules linked in: nls_utf8 udf crc_itu_t usb_storage cryptd aes_x86_64 aes_generic fuse parport_pc ppdev dm_crypt kvm_intel joydev kvm binfmt_misc snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwlagn snd_hwdep snd_pcm mac80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd cfg80211 soundcore btusb uvcvideo snd_page_alloc bluetooth videodev v4l2_compat_ioctl32 psmouse ideapad_laptop serio_raw sparse_keymap lp intel_ips mac_hid parport ext4 mbcache jbd2 i915 ahci libahci libata drm_kms_helper drm i2c_algo_bit cfbcopyarea video cfbimgblt cfbfillrect atl1c
> [18682.257659]
> [18682.257685] Pid: 14069, comm: xdg-screensaver Not tainted 2.6.39+ #4 LENOVO 0876 /Base Board Product Name
> [18682.257845] RIP: 0010:[<ffffffff811d6503>] [<ffffffff811d6503>] __elv_add_request+0x1e3/0x270
> [18682.257964] RSP: 0018:ffff88009b3a19e8 EFLAGS: 00010006
> [18682.258056] RAX: 0000000000000000 RBX: ffff880131559020 RCX: 0000000000000001
> [18682.258152] RDX: 0000000000000001 RSI: ffff880131559020 RDI: ffff8801315f77d0
> [18682.258248] RBP: ffff88009b3a1a08 R08: ffffffff811e1000 R09: ffff8801315f77d0
> [18682.258343] R10: ffff8800b5085e40 R11: ffff8800b5085e40 R12: ffff8801315f77d0
> [18682.258437] R13: 0000000000000001 R14: 0000000000000001 R15: ffff8800b5085e40
> [18682.258529] FS: 0000000000000000(0000) GS:ffff880137c80000(0000) knlGS:0000000000000000
> [18682.258636] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [18682.258712] CR2: 0000000000000008 CR3: 0000000001a03000 CR4: 00000000000006e0
> [18682.258807] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [18682.258898] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [18682.258994] Process xdg-screensaver (pid: 14069, threadinfo ffff88009b3a0000, task ffff8800aff096b0)
> [18682.259112] Stack:
> [18682.259140] ffff8801315f77d0 ffff880131559020 0000000000000001 ffff88009b3a1c48
> [18682.259249] ffff88009b3a1a38 ffffffff811e10a0 0000000000000000 ffff88009b3a1a48
> [18682.259354] ffff880131559020 0000000000000000 ffff88009b3a1af8 ffffffff811e118e
> [18682.259460] Call Trace:
> [18682.259504] [<ffffffff811e10a0>] blk_execute_rq_nowait+0x60/0xc0
> [18682.259587] [<ffffffff811e118e>] blk_execute_rq+0x8e/0x130
> [18682.259668] [<ffffffff812db5bc>] scsi_execute+0xfc/0x160
> [18682.259742] [<ffffffff812dc18f>] scsi_execute_req+0xbf/0x130
> [18682.259821] [<ffffffff812d5c71>] ioctl_internal_command.clone.4+0x61/0x1b0
> [18682.259914] [<ffffffff812d5e3e>] scsi_set_medium_removal+0x7e/0xb0
> [18682.260000] [<ffffffff812ecfa0>] sr_lock_door+0x20/0x30
> [18682.260075] [<ffffffff812f9da7>] cdrom_release+0x147/0x270
> [18682.260153] [<ffffffff812ebac8>] sr_block_release+0x38/0x60
> [18682.260233] [<ffffffff811730ac>] __blkdev_put+0x16c/0x1b0
> [18682.260308] [<ffffffff81173129>] blkdev_put+0x39/0x150
> [18682.260379] [<ffffffff81173264>] blkdev_close+0x24/0x30
> [18682.260455] [<ffffffff81140fba>] fput+0xea/0x220
> [18682.260521] [<ffffffff8113d396>] filp_close+0x66/0x90
> [18682.260592] [<ffffffff8105c117>] put_files_struct+0x87/0xf0
> [18682.260668] [<ffffffff8105c244>] exit_files+0x54/0x70
> [18682.264275] [<ffffffff8105c72b>] do_exit+0x16b/0x860
> [18682.267802] [<ffffffff811f6c2a>] ? trace_hardirqs_off_thunk+0x3a/0x6c
> [18682.271512] [<ffffffff8105d0e8>] do_group_exit+0x58/0xd0
> [18682.276948] [<ffffffff8105d177>] sys_exit_group+0x17/0x20
> [18682.281121] [<ffffffff81485d42>] system_call_fastpath+0x16/0x1b
> [18682.284603] Code: ff ff e9 90 fe ff ff 90 81 4b 40 00 08 00 00 48 89 df e8 c1 93 00 00 eb c1 0f 1f 80 00 00 00 00 81 4b 40 00 08 00 00 49 8b 04 24
> [18682.284903] 89 58 08 48 89 03 4c 89 63 08 49 89 1c 24 eb 9e 0f 1f 40 00
> [18682.290727] RIP [<ffffffff811d6503>] __elv_add_request+0x1e3/0x270
> [18682.293189] RSP <ffff88009b3a19e8>
> [18682.296075] CR2: 0000000000000008
> [18682.358582] ---[ end trace 82dd699fdeb50b72 ]---
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: __elv_add_request OOPS
@ 2011-05-24 10:44 ` Jens Axboe
0 siblings, 0 replies; 47+ messages in thread
From: Jens Axboe @ 2011-05-24 10:44 UTC (permalink / raw)
To: Parag Warudkar; +Cc: linux-kernel, James.Bottomley, Linux SCSI List
On 2011-05-24 06:29, Parag Warudkar wrote:
>
> External DVD drive - connected when suspended, removed before resume.
> Results in NULL pointer dereference in __blk_add_request on resume.
>
> *ffffffff811d6503: 48 89 58 08 mov %rbx,0x8(%rax) |
> %ebx = ffff880131559020 <--- faulting instruction
>
> 48 89 58 08 appears only in list_add :
>
> static inline void list_add(struct list_head *new, struct list_head *head)
> {
> __list_add(new, head, head->next);
> ffffffff81ac012c: 49 8b 04 24 mov (%r12),%rax
> #ifndef CONFIG_DEBUG_LIST
> static inline void __list_add(struct list_head *new,
> struct list_head *prev,
> struct list_head *next)
> {
> next->prev = new;
> ffffffff81ac0130: 48 89 58 08 mov %rbx,0x8(%rax)
>
> AFAICS list_add is only called from one place in __elv_add_request :
>
> switch (where) {
> case ELEVATOR_INSERT_REQUEUE:
> case ELEVATOR_INSERT_FRONT:
> rq->cmd_flags |= REQ_SOFTBARRIER;
> ** list_add(&rq->queuelist, &q->queue_head);
> break;
>
> Now, where is the patch? :)
You forgot to attach it?
This is clearly q == NULL, CC'ing James/linux-scsi. Oops left below.
> [18682.256362] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
> [18682.256535] IP: [<ffffffff811d6503>] __elv_add_request+0x1e3/0x270
> [18682.256603] PGD 0
> [18682.256632] Oops: 0002 [#1] SMP
> [18682.256686] CPU 2
> [18682.256714] Modules linked in: nls_utf8 udf crc_itu_t usb_storage cryptd aes_x86_64 aes_generic fuse parport_pc ppdev dm_crypt kvm_intel joydev kvm binfmt_misc snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwlagn snd_hwdep snd_pcm mac80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd cfg80211 soundcore btusb uvcvideo snd_page_alloc bluetooth videodev v4l2_compat_ioctl32 psmouse ideapad_laptop serio_raw sparse_keymap lp intel_ips mac_hid parport ext4 mbcache jbd2 i915 ahci libahci libata drm_kms_helper drm i2c_algo_bit cfbcopyarea video cfbimgblt cfbfillrect atl1c
> [18682.257659]
> [18682.257685] Pid: 14069, comm: xdg-screensaver Not tainted 2.6.39+ #4 LENOVO 0876 /Base Board Product Name
> [18682.257845] RIP: 0010:[<ffffffff811d6503>] [<ffffffff811d6503>] __elv_add_request+0x1e3/0x270
> [18682.257964] RSP: 0018:ffff88009b3a19e8 EFLAGS: 00010006
> [18682.258056] RAX: 0000000000000000 RBX: ffff880131559020 RCX: 0000000000000001
> [18682.258152] RDX: 0000000000000001 RSI: ffff880131559020 RDI: ffff8801315f77d0
> [18682.258248] RBP: ffff88009b3a1a08 R08: ffffffff811e1000 R09: ffff8801315f77d0
> [18682.258343] R10: ffff8800b5085e40 R11: ffff8800b5085e40 R12: ffff8801315f77d0
> [18682.258437] R13: 0000000000000001 R14: 0000000000000001 R15: ffff8800b5085e40
> [18682.258529] FS: 0000000000000000(0000) GS:ffff880137c80000(0000) knlGS:0000000000000000
> [18682.258636] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [18682.258712] CR2: 0000000000000008 CR3: 0000000001a03000 CR4: 00000000000006e0
> [18682.258807] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [18682.258898] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [18682.258994] Process xdg-screensaver (pid: 14069, threadinfo ffff88009b3a0000, task ffff8800aff096b0)
> [18682.259112] Stack:
> [18682.259140] ffff8801315f77d0 ffff880131559020 0000000000000001 ffff88009b3a1c48
> [18682.259249] ffff88009b3a1a38 ffffffff811e10a0 0000000000000000 ffff88009b3a1a48
> [18682.259354] ffff880131559020 0000000000000000 ffff88009b3a1af8 ffffffff811e118e
> [18682.259460] Call Trace:
> [18682.259504] [<ffffffff811e10a0>] blk_execute_rq_nowait+0x60/0xc0
> [18682.259587] [<ffffffff811e118e>] blk_execute_rq+0x8e/0x130
> [18682.259668] [<ffffffff812db5bc>] scsi_execute+0xfc/0x160
> [18682.259742] [<ffffffff812dc18f>] scsi_execute_req+0xbf/0x130
> [18682.259821] [<ffffffff812d5c71>] ioctl_internal_command.clone.4+0x61/0x1b0
> [18682.259914] [<ffffffff812d5e3e>] scsi_set_medium_removal+0x7e/0xb0
> [18682.260000] [<ffffffff812ecfa0>] sr_lock_door+0x20/0x30
> [18682.260075] [<ffffffff812f9da7>] cdrom_release+0x147/0x270
> [18682.260153] [<ffffffff812ebac8>] sr_block_release+0x38/0x60
> [18682.260233] [<ffffffff811730ac>] __blkdev_put+0x16c/0x1b0
> [18682.260308] [<ffffffff81173129>] blkdev_put+0x39/0x150
> [18682.260379] [<ffffffff81173264>] blkdev_close+0x24/0x30
> [18682.260455] [<ffffffff81140fba>] fput+0xea/0x220
> [18682.260521] [<ffffffff8113d396>] filp_close+0x66/0x90
> [18682.260592] [<ffffffff8105c117>] put_files_struct+0x87/0xf0
> [18682.260668] [<ffffffff8105c244>] exit_files+0x54/0x70
> [18682.264275] [<ffffffff8105c72b>] do_exit+0x16b/0x860
> [18682.267802] [<ffffffff811f6c2a>] ? trace_hardirqs_off_thunk+0x3a/0x6c
> [18682.271512] [<ffffffff8105d0e8>] do_group_exit+0x58/0xd0
> [18682.276948] [<ffffffff8105d177>] sys_exit_group+0x17/0x20
> [18682.281121] [<ffffffff81485d42>] system_call_fastpath+0x16/0x1b
> [18682.284603] Code: ff ff e9 90 fe ff ff 90 81 4b 40 00 08 00 00 48 89 df e8 c1 93 00 00 eb c1 0f 1f 80 00 00 00 00 81 4b 40 00 08 00 00 49 8b 04 24
> [18682.284903] 89 58 08 48 89 03 4c 89 63 08 49 89 1c 24 eb 9e 0f 1f 40 00
> [18682.290727] RIP [<ffffffff811d6503>] __elv_add_request+0x1e3/0x270
> [18682.293189] RSP <ffff88009b3a19e8>
> [18682.296075] CR2: 0000000000000008
> [18682.358582] ---[ end trace 82dd699fdeb50b72 ]---
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-24 10:44 ` Jens Axboe
@ 2011-05-25 1:41 ` Parag Warudkar
-1 siblings, 0 replies; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 1:41 UTC (permalink / raw)
To: Jens Axboe
Cc: Parag Warudkar, linux-kernel, James.Bottomley, akpm, torvalds,
Linux SCSI List
On Tue, 24 May 2011, Jens Axboe wrote:
> On 2011-05-24 06:29, Parag Warudkar wrote:
> >
> > External DVD drive - connected when suspended, removed before resume.
> > Results in NULL pointer dereference in __blk_add_request on resume.
> >
> > *ffffffff811d6503: 48 89 58 08 mov %rbx,0x8(%rax) |
> > %ebx = ffff880131559020 <--- faulting instruction
> >
> > 48 89 58 08 appears only in list_add :
> >
> > static inline void list_add(struct list_head *new, struct list_head *head)
> > {
> > __list_add(new, head, head->next);
> > ffffffff81ac012c: 49 8b 04 24 mov (%r12),%rax
> > #ifndef CONFIG_DEBUG_LIST
> > static inline void __list_add(struct list_head *new,
> > struct list_head *prev,
> > struct list_head *next)
> > {
> > next->prev = new;
> > ffffffff81ac0130: 48 89 58 08 mov %rbx,0x8(%rax)
> >
> > AFAICS list_add is only called from one place in __elv_add_request :
> >
> > switch (where) {
> > case ELEVATOR_INSERT_REQUEUE:
> > case ELEVATOR_INSERT_FRONT:
> > rq->cmd_flags |= REQ_SOFTBARRIER;
> > ** list_add(&rq->queuelist, &q->queue_head);
> > break;
> >
> > Now, where is the patch? :)
>
> You forgot to attach it?
>
> This is clearly q == NULL [snip]
OK, I think this patch should do the trick.
Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
Check for device deletion before sending it a scsi command. This fixes an
OOPS I was seeing during resume when the external dvd drive was removed
while suspended.
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index d9564fb..cc4edbf 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -136,7 +136,7 @@ int scsi_set_medium_removal(struct scsi_device *sdev, char state)
char scsi_cmd[MAX_COMMAND_SIZE];
int ret;
- if (!sdev->removable || !sdev->lockable)
+ if (!sdev->removable || !sdev->lockable || sdev->sdev_state == SDEV_DEL)
return 0;
scsi_cmd[0] = ALLOW_MEDIUM_REMOVAL;
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-25 1:41 ` Parag Warudkar
0 siblings, 0 replies; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 1:41 UTC (permalink / raw)
To: Jens Axboe
Cc: Parag Warudkar, linux-kernel, James.Bottomley, akpm, torvalds,
Linux SCSI List
On Tue, 24 May 2011, Jens Axboe wrote:
> On 2011-05-24 06:29, Parag Warudkar wrote:
> >
> > External DVD drive - connected when suspended, removed before resume.
> > Results in NULL pointer dereference in __blk_add_request on resume.
> >
> > *ffffffff811d6503: 48 89 58 08 mov %rbx,0x8(%rax) |
> > %ebx = ffff880131559020 <--- faulting instruction
> >
> > 48 89 58 08 appears only in list_add :
> >
> > static inline void list_add(struct list_head *new, struct list_head *head)
> > {
> > __list_add(new, head, head->next);
> > ffffffff81ac012c: 49 8b 04 24 mov (%r12),%rax
> > #ifndef CONFIG_DEBUG_LIST
> > static inline void __list_add(struct list_head *new,
> > struct list_head *prev,
> > struct list_head *next)
> > {
> > next->prev = new;
> > ffffffff81ac0130: 48 89 58 08 mov %rbx,0x8(%rax)
> >
> > AFAICS list_add is only called from one place in __elv_add_request :
> >
> > switch (where) {
> > case ELEVATOR_INSERT_REQUEUE:
> > case ELEVATOR_INSERT_FRONT:
> > rq->cmd_flags |= REQ_SOFTBARRIER;
> > ** list_add(&rq->queuelist, &q->queue_head);
> > break;
> >
> > Now, where is the patch? :)
>
> You forgot to attach it?
>
> This is clearly q == NULL [snip]
OK, I think this patch should do the trick.
Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
Check for device deletion before sending it a scsi command. This fixes an
OOPS I was seeing during resume when the external dvd drive was removed
while suspended.
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index d9564fb..cc4edbf 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -136,7 +136,7 @@ int scsi_set_medium_removal(struct scsi_device *sdev, char state)
char scsi_cmd[MAX_COMMAND_SIZE];
int ret;
- if (!sdev->removable || !sdev->lockable)
+ if (!sdev->removable || !sdev->lockable || sdev->sdev_state == SDEV_DEL)
return 0;
scsi_cmd[0] = ALLOW_MEDIUM_REMOVAL;
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 1:41 ` Parag Warudkar
@ 2011-05-25 7:37 ` Jens Axboe
-1 siblings, 0 replies; 47+ messages in thread
From: Jens Axboe @ 2011-05-25 7:37 UTC (permalink / raw)
To: Parag Warudkar
Cc: linux-kernel, James.Bottomley, akpm, torvalds, Linux SCSI List
On 2011-05-25 03:41, Parag Warudkar wrote:
>
>
> On Tue, 24 May 2011, Jens Axboe wrote:
>
>> On 2011-05-24 06:29, Parag Warudkar wrote:
>>>
>>> External DVD drive - connected when suspended, removed before resume.
>>> Results in NULL pointer dereference in __blk_add_request on resume.
>>>
>>> *ffffffff811d6503: 48 89 58 08 mov %rbx,0x8(%rax) |
>>> %ebx = ffff880131559020 <--- faulting instruction
>>>
>>> 48 89 58 08 appears only in list_add :
>>>
>>> static inline void list_add(struct list_head *new, struct list_head *head)
>>> {
>>> __list_add(new, head, head->next);
>>> ffffffff81ac012c: 49 8b 04 24 mov (%r12),%rax
>>> #ifndef CONFIG_DEBUG_LIST
>>> static inline void __list_add(struct list_head *new,
>>> struct list_head *prev,
>>> struct list_head *next)
>>> {
>>> next->prev = new;
>>> ffffffff81ac0130: 48 89 58 08 mov %rbx,0x8(%rax)
>>>
>>> AFAICS list_add is only called from one place in __elv_add_request :
>>>
>>> switch (where) {
>>> case ELEVATOR_INSERT_REQUEUE:
>>> case ELEVATOR_INSERT_FRONT:
>>> rq->cmd_flags |= REQ_SOFTBARRIER;
>>> ** list_add(&rq->queuelist, &q->queue_head);
>>> break;
>>>
>>> Now, where is the patch? :)
>>
>> You forgot to attach it?
>>
>> This is clearly q == NULL [snip]
>
> OK, I think this patch should do the trick.
>
> Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
> Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
>
> Check for device deletion before sending it a scsi command. This fixes an
> OOPS I was seeing during resume when the external dvd drive was removed
> while suspended.
>
> diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
> index d9564fb..cc4edbf 100644
> --- a/drivers/scsi/scsi_ioctl.c
> +++ b/drivers/scsi/scsi_ioctl.c
> @@ -136,7 +136,7 @@ int scsi_set_medium_removal(struct scsi_device *sdev, char state)
> char scsi_cmd[MAX_COMMAND_SIZE];
> int ret;
>
> - if (!sdev->removable || !sdev->lockable)
> + if (!sdev->removable || !sdev->lockable || sdev->sdev_state == SDEV_DEL)
> return 0;
>
> scsi_cmd[0] = ALLOW_MEDIUM_REMOVAL;
While this will fix your particular oops, I don't think it's quite
right. It's fixing one particular piece of fall out from attempting to
talk to a removed device, it's not necessarily fixing the full class of
them. The other checks in scsi_set_medium_removal() aren't related to a
changing state of the device, they are capability checks.
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-25 7:37 ` Jens Axboe
0 siblings, 0 replies; 47+ messages in thread
From: Jens Axboe @ 2011-05-25 7:37 UTC (permalink / raw)
To: Parag Warudkar
Cc: linux-kernel, James.Bottomley, akpm, torvalds, Linux SCSI List
On 2011-05-25 03:41, Parag Warudkar wrote:
>
>
> On Tue, 24 May 2011, Jens Axboe wrote:
>
>> On 2011-05-24 06:29, Parag Warudkar wrote:
>>>
>>> External DVD drive - connected when suspended, removed before resume.
>>> Results in NULL pointer dereference in __blk_add_request on resume.
>>>
>>> *ffffffff811d6503: 48 89 58 08 mov %rbx,0x8(%rax) |
>>> %ebx = ffff880131559020 <--- faulting instruction
>>>
>>> 48 89 58 08 appears only in list_add :
>>>
>>> static inline void list_add(struct list_head *new, struct list_head *head)
>>> {
>>> __list_add(new, head, head->next);
>>> ffffffff81ac012c: 49 8b 04 24 mov (%r12),%rax
>>> #ifndef CONFIG_DEBUG_LIST
>>> static inline void __list_add(struct list_head *new,
>>> struct list_head *prev,
>>> struct list_head *next)
>>> {
>>> next->prev = new;
>>> ffffffff81ac0130: 48 89 58 08 mov %rbx,0x8(%rax)
>>>
>>> AFAICS list_add is only called from one place in __elv_add_request :
>>>
>>> switch (where) {
>>> case ELEVATOR_INSERT_REQUEUE:
>>> case ELEVATOR_INSERT_FRONT:
>>> rq->cmd_flags |= REQ_SOFTBARRIER;
>>> ** list_add(&rq->queuelist, &q->queue_head);
>>> break;
>>>
>>> Now, where is the patch? :)
>>
>> You forgot to attach it?
>>
>> This is clearly q == NULL [snip]
>
> OK, I think this patch should do the trick.
>
> Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
> Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
>
> Check for device deletion before sending it a scsi command. This fixes an
> OOPS I was seeing during resume when the external dvd drive was removed
> while suspended.
>
> diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
> index d9564fb..cc4edbf 100644
> --- a/drivers/scsi/scsi_ioctl.c
> +++ b/drivers/scsi/scsi_ioctl.c
> @@ -136,7 +136,7 @@ int scsi_set_medium_removal(struct scsi_device *sdev, char state)
> char scsi_cmd[MAX_COMMAND_SIZE];
> int ret;
>
> - if (!sdev->removable || !sdev->lockable)
> + if (!sdev->removable || !sdev->lockable || sdev->sdev_state == SDEV_DEL)
> return 0;
>
> scsi_cmd[0] = ALLOW_MEDIUM_REMOVAL;
While this will fix your particular oops, I don't think it's quite
right. It's fixing one particular piece of fall out from attempting to
talk to a removed device, it's not necessarily fixing the full class of
them. The other checks in scsi_set_medium_removal() aren't related to a
changing state of the device, they are capability checks.
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 7:37 ` Jens Axboe
@ 2011-05-25 18:44 ` Parag Warudkar
-1 siblings, 0 replies; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 18:44 UTC (permalink / raw)
To: Jens Axboe
Cc: Parag Warudkar, linux-kernel, James.Bottomley, akpm, torvalds,
Linux SCSI List
On Wed, 25 May 2011, Jens Axboe wrote:
> While this will fix your particular oops, I don't think it's quite
> right. It's fixing one particular piece of fall out from attempting to
> talk to a removed device, it's not necessarily fixing the full class of
> them. The other checks in scsi_set_medium_removal() aren't related to a
> changing state of the device, they are capability checks.
Below patch pushes the check down to ioctl functions and hopefully should
cover more ioctl-on-gone-device cases by returning -ENXIO if an attempt
was made to submit request to a non-running device.
With this patch in place - instead of oopsing I now get a proper I/O error
on resume.
AFAICT from my limited SCSI layer knowledge - these seem to be the right
places to check. Would be interested in knowing if there are better/more
complete ways to handle this but if they are going to take time IMHO it
certainly doesn't hurt to keep the below patch in.
Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index d9564fb..c32cade 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -91,6 +91,10 @@ static int ioctl_internal_command(struct scsi_device *sdev, char *cmd,
int result;
struct scsi_sense_hdr sshdr;
+ if (!sdev || sdev->sdev_state == SDEV_DEL
+ || sdev->sdev_state > SDEV_QUIESCE)
+ return -ENXIO;
+
SCSI_LOG_IOCTL(1, printk("Trying ioctl with scsi command %d\n", *cmd));
result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0,
@@ -195,8 +199,9 @@ int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
char scsi_cmd[MAX_COMMAND_SIZE];
- /* No idea how this happens.... */
- if (!sdev)
+ /* No idea how !sdev happens.... */
+ if (!sdev || sdev->sdev_state == SDEV_DEL
+ || sdev->sdev_state > SDEV_QUIESCE)
return -ENXIO;
/*
@@ -288,6 +293,10 @@ int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd,
{
int val, result;
+ if (!sdev || sdev->sdev_state == SDEV_DEL
+ || sdev->sdev_state > SDEV_QUIESCE)
+ return -ENXIO;
+
/* The first set of iocts may be executed even if we're doing
* error processing, as long as the device was opened
* non-blocking */
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-25 18:44 ` Parag Warudkar
0 siblings, 0 replies; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 18:44 UTC (permalink / raw)
To: Jens Axboe
Cc: Parag Warudkar, linux-kernel, James.Bottomley, akpm, torvalds,
Linux SCSI List
On Wed, 25 May 2011, Jens Axboe wrote:
> While this will fix your particular oops, I don't think it's quite
> right. It's fixing one particular piece of fall out from attempting to
> talk to a removed device, it's not necessarily fixing the full class of
> them. The other checks in scsi_set_medium_removal() aren't related to a
> changing state of the device, they are capability checks.
Below patch pushes the check down to ioctl functions and hopefully should
cover more ioctl-on-gone-device cases by returning -ENXIO if an attempt
was made to submit request to a non-running device.
With this patch in place - instead of oopsing I now get a proper I/O error
on resume.
AFAICT from my limited SCSI layer knowledge - these seem to be the right
places to check. Would be interested in knowing if there are better/more
complete ways to handle this but if they are going to take time IMHO it
certainly doesn't hurt to keep the below patch in.
Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index d9564fb..c32cade 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -91,6 +91,10 @@ static int ioctl_internal_command(struct scsi_device *sdev, char *cmd,
int result;
struct scsi_sense_hdr sshdr;
+ if (!sdev || sdev->sdev_state == SDEV_DEL
+ || sdev->sdev_state > SDEV_QUIESCE)
+ return -ENXIO;
+
SCSI_LOG_IOCTL(1, printk("Trying ioctl with scsi command %d\n", *cmd));
result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0,
@@ -195,8 +199,9 @@ int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
char scsi_cmd[MAX_COMMAND_SIZE];
- /* No idea how this happens.... */
- if (!sdev)
+ /* No idea how !sdev happens.... */
+ if (!sdev || sdev->sdev_state == SDEV_DEL
+ || sdev->sdev_state > SDEV_QUIESCE)
return -ENXIO;
/*
@@ -288,6 +293,10 @@ int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd,
{
int val, result;
+ if (!sdev || sdev->sdev_state == SDEV_DEL
+ || sdev->sdev_state > SDEV_QUIESCE)
+ return -ENXIO;
+
/* The first set of iocts may be executed even if we're doing
* error processing, as long as the device was opened
* non-blocking */
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 18:44 ` Parag Warudkar
@ 2011-05-25 18:55 ` Linus Torvalds
-1 siblings, 0 replies; 47+ messages in thread
From: Linus Torvalds @ 2011-05-25 18:55 UTC (permalink / raw)
To: Parag Warudkar
Cc: Jens Axboe, linux-kernel, James.Bottomley, akpm, Linux SCSI List
On Wed, May 25, 2011 at 11:44 AM, Parag Warudkar <parag.lkml@gmail.com> wrote:
>
> Below patch pushes the check down to ioctl functions and hopefully should
> cover more ioctl-on-gone-device cases by returning -ENXIO if an attempt
> was made to submit request to a non-running device.
Can we please not duplicate complicated logic like that?
IOW, just make a helper function for it.
That said, isn't this all *exactly* what scsi_prep_state_check() is
supposed to check for? Why isn't that called, or if called, why isn't
it doing the right thing?
Linus
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-25 18:55 ` Linus Torvalds
0 siblings, 0 replies; 47+ messages in thread
From: Linus Torvalds @ 2011-05-25 18:55 UTC (permalink / raw)
To: Parag Warudkar
Cc: Jens Axboe, linux-kernel, James.Bottomley, akpm, Linux SCSI List
On Wed, May 25, 2011 at 11:44 AM, Parag Warudkar <parag.lkml@gmail.com> wrote:
>
> Below patch pushes the check down to ioctl functions and hopefully should
> cover more ioctl-on-gone-device cases by returning -ENXIO if an attempt
> was made to submit request to a non-running device.
Can we please not duplicate complicated logic like that?
IOW, just make a helper function for it.
That said, isn't this all *exactly* what scsi_prep_state_check() is
supposed to check for? Why isn't that called, or if called, why isn't
it doing the right thing?
Linus
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 18:55 ` Linus Torvalds
@ 2011-05-25 19:02 ` Jens Axboe
-1 siblings, 0 replies; 47+ messages in thread
From: Jens Axboe @ 2011-05-25 19:02 UTC (permalink / raw)
To: Linus Torvalds
Cc: Parag Warudkar, linux-kernel, James.Bottomley, akpm, Linux SCSI List
On 2011-05-25 20:55, Linus Torvalds wrote:
> On Wed, May 25, 2011 at 11:44 AM, Parag Warudkar <parag.lkml@gmail.com> wrote:
>>
>> Below patch pushes the check down to ioctl functions and hopefully should
>> cover more ioctl-on-gone-device cases by returning -ENXIO if an attempt
>> was made to submit request to a non-running device.
>
> Can we please not duplicate complicated logic like that?
>
> IOW, just make a helper function for it.
>
> That said, isn't this all *exactly* what scsi_prep_state_check() is
> supposed to check for? Why isn't that called, or if called, why isn't
> it doing the right thing?
This is before you get that far, it's actually oopsing on inserting the
request on sdev->sdev_queue that is now NULL. The prep state checking
happens when sr/sd pulls the request off the queue for processing.
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-25 19:02 ` Jens Axboe
0 siblings, 0 replies; 47+ messages in thread
From: Jens Axboe @ 2011-05-25 19:02 UTC (permalink / raw)
To: Linus Torvalds
Cc: Parag Warudkar, linux-kernel, James.Bottomley, akpm, Linux SCSI List
On 2011-05-25 20:55, Linus Torvalds wrote:
> On Wed, May 25, 2011 at 11:44 AM, Parag Warudkar <parag.lkml@gmail.com> wrote:
>>
>> Below patch pushes the check down to ioctl functions and hopefully should
>> cover more ioctl-on-gone-device cases by returning -ENXIO if an attempt
>> was made to submit request to a non-running device.
>
> Can we please not duplicate complicated logic like that?
>
> IOW, just make a helper function for it.
>
> That said, isn't this all *exactly* what scsi_prep_state_check() is
> supposed to check for? Why isn't that called, or if called, why isn't
> it doing the right thing?
This is before you get that far, it's actually oopsing on inserting the
request on sdev->sdev_queue that is now NULL. The prep state checking
happens when sr/sd pulls the request off the queue for processing.
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 19:02 ` Jens Axboe
@ 2011-05-25 19:13 ` Linus Torvalds
-1 siblings, 0 replies; 47+ messages in thread
From: Linus Torvalds @ 2011-05-25 19:13 UTC (permalink / raw)
To: Jens Axboe
Cc: Parag Warudkar, linux-kernel, James.Bottomley, akpm, Linux SCSI List
On Wed, May 25, 2011 at 12:02 PM, Jens Axboe <jaxboe@fusionio.com> wrote:
>
> This is before you get that far, it's actually oopsing on inserting the
> request on sdev->sdev_queue that is now NULL. The prep state checking
> happens when sr/sd pulls the request off the queue for processing.
Ok, please just add a "sdev_alive(sdev)" helper that checks for sdev
&& sdev->sdev_queue. Apparently the issue isn't "this device is
SDEV_DEL, so don't send commands". Apparently the issue is literally
"don't oops".
Or maybe the prep state checking could be moved earlier. It seems
stupid to have a "can I do this command" function that is run too late
to actually catch the problems..
Linus
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-25 19:13 ` Linus Torvalds
0 siblings, 0 replies; 47+ messages in thread
From: Linus Torvalds @ 2011-05-25 19:13 UTC (permalink / raw)
To: Jens Axboe
Cc: Parag Warudkar, linux-kernel, James.Bottomley, akpm, Linux SCSI List
On Wed, May 25, 2011 at 12:02 PM, Jens Axboe <jaxboe@fusionio.com> wrote:
>
> This is before you get that far, it's actually oopsing on inserting the
> request on sdev->sdev_queue that is now NULL. The prep state checking
> happens when sr/sd pulls the request off the queue for processing.
Ok, please just add a "sdev_alive(sdev)" helper that checks for sdev
&& sdev->sdev_queue. Apparently the issue isn't "this device is
SDEV_DEL, so don't send commands". Apparently the issue is literally
"don't oops".
Or maybe the prep state checking could be moved earlier. It seems
stupid to have a "can I do this command" function that is run too late
to actually catch the problems..
Linus
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 19:13 ` Linus Torvalds
@ 2011-05-25 19:17 ` Jens Axboe
-1 siblings, 0 replies; 47+ messages in thread
From: Jens Axboe @ 2011-05-25 19:17 UTC (permalink / raw)
To: Linus Torvalds
Cc: Parag Warudkar, linux-kernel, James.Bottomley, akpm, Linux SCSI List
On 2011-05-25 21:13, Linus Torvalds wrote:
> On Wed, May 25, 2011 at 12:02 PM, Jens Axboe <jaxboe@fusionio.com> wrote:
>>
>> This is before you get that far, it's actually oopsing on inserting the
>> request on sdev->sdev_queue that is now NULL. The prep state checking
>> happens when sr/sd pulls the request off the queue for processing.
>
> Ok, please just add a "sdev_alive(sdev)" helper that checks for sdev
> && sdev->sdev_queue. Apparently the issue isn't "this device is
> SDEV_DEL, so don't send commands". Apparently the issue is literally
> "don't oops".
Yep, will do.
> Or maybe the prep state checking could be moved earlier. It seems
> stupid to have a "can I do this command" function that is run too late
> to actually catch the problems..
I don't think we can move it earlier, we essentially have to do the
check at both ends. The "normal" IO path would see that the queue is
dead and error the IO, but this is an internal setup that sets up the
request and then adds it to the stored queue pointer. So it needs to
check this state one way or the other. I think the above fix with the
sdev_alive() will be good enough.
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-25 19:17 ` Jens Axboe
0 siblings, 0 replies; 47+ messages in thread
From: Jens Axboe @ 2011-05-25 19:17 UTC (permalink / raw)
To: Linus Torvalds
Cc: Parag Warudkar, linux-kernel, James.Bottomley, akpm, Linux SCSI List
On 2011-05-25 21:13, Linus Torvalds wrote:
> On Wed, May 25, 2011 at 12:02 PM, Jens Axboe <jaxboe@fusionio.com> wrote:
>>
>> This is before you get that far, it's actually oopsing on inserting the
>> request on sdev->sdev_queue that is now NULL. The prep state checking
>> happens when sr/sd pulls the request off the queue for processing.
>
> Ok, please just add a "sdev_alive(sdev)" helper that checks for sdev
> && sdev->sdev_queue. Apparently the issue isn't "this device is
> SDEV_DEL, so don't send commands". Apparently the issue is literally
> "don't oops".
Yep, will do.
> Or maybe the prep state checking could be moved earlier. It seems
> stupid to have a "can I do this command" function that is run too late
> to actually catch the problems..
I don't think we can move it earlier, we essentially have to do the
check at both ends. The "normal" IO path would see that the queue is
dead and error the IO, but this is an internal setup that sets up the
request and then adds it to the stored queue pointer. So it needs to
check this state one way or the other. I think the above fix with the
sdev_alive() will be good enough.
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 19:17 ` Jens Axboe
@ 2011-05-25 19:52 ` Parag Warudkar
-1 siblings, 0 replies; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 19:52 UTC (permalink / raw)
To: Jens Axboe
Cc: Linus Torvalds, Parag Warudkar, linux-kernel, James.Bottomley,
akpm, Linux SCSI List
On Wed, 25 May 2011, Jens Axboe wrote:
> I don't think we can move it earlier, we essentially have to do the
> check at both ends. The "normal" IO path would see that the queue is
> dead and error the IO, but this is an internal setup that sets up the
> request and then adds it to the stored queue pointer. So it needs to
> check this state one way or the other. I think the above fix with the
> sdev_alive() will be good enough.
>
If I understood it right we need checks in both places (kind of makes
sense as the device could be gone *after* we checked in ioctl function and
before the request queue was dereferenced). So here is the ioctl check
with a helper function for state check that Linus asked for.
Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index d9564fb..8615e63 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -30,6 +30,13 @@
#define MAX_BUF PAGE_SIZE
+static inline int sdev_early_check(struct scsi_device *sdev)
+{
+ if (!sdev || sdev->sdev_state == SDEV_DEL
+ || sdev->sdev_state > SDEV_QUIESCE)
+ return -ENXIO;
+ return 0;
+}
/**
* ioctl_probe -- return host identification
* @host: host to identify
@@ -91,6 +98,10 @@ static int ioctl_internal_command(struct scsi_device *sdev, char *cmd,
int result;
struct scsi_sense_hdr sshdr;
+ result = sdev_early_check(sdev);
+ if (result)
+ return result;
+
SCSI_LOG_IOCTL(1, printk("Trying ioctl with scsi command %d\n", *cmd));
result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0,
@@ -194,10 +205,11 @@ static int scsi_ioctl_get_pci(struct scsi_device *sdev, void __user *arg)
int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
char scsi_cmd[MAX_COMMAND_SIZE];
+ int result;
- /* No idea how this happens.... */
- if (!sdev)
- return -ENXIO;
+ result = sdev_early_check(sdev);
+ if (result)
+ return result;
/*
* If we are in the middle of error recovery, don't let anyone
@@ -288,6 +300,10 @@ int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd,
{
int val, result;
+ result = sdev_early_check(sdev);
+ if (result)
+ return result;
+
/* The first set of iocts may be executed even if we're doing
* error processing, as long as the device was opened
* non-blocking */
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-25 19:52 ` Parag Warudkar
0 siblings, 0 replies; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 19:52 UTC (permalink / raw)
To: Jens Axboe
Cc: Linus Torvalds, Parag Warudkar, linux-kernel, James.Bottomley,
akpm, Linux SCSI List
On Wed, 25 May 2011, Jens Axboe wrote:
> I don't think we can move it earlier, we essentially have to do the
> check at both ends. The "normal" IO path would see that the queue is
> dead and error the IO, but this is an internal setup that sets up the
> request and then adds it to the stored queue pointer. So it needs to
> check this state one way or the other. I think the above fix with the
> sdev_alive() will be good enough.
>
If I understood it right we need checks in both places (kind of makes
sense as the device could be gone *after* we checked in ioctl function and
before the request queue was dereferenced). So here is the ioctl check
with a helper function for state check that Linus asked for.
Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index d9564fb..8615e63 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -30,6 +30,13 @@
#define MAX_BUF PAGE_SIZE
+static inline int sdev_early_check(struct scsi_device *sdev)
+{
+ if (!sdev || sdev->sdev_state == SDEV_DEL
+ || sdev->sdev_state > SDEV_QUIESCE)
+ return -ENXIO;
+ return 0;
+}
/**
* ioctl_probe -- return host identification
* @host: host to identify
@@ -91,6 +98,10 @@ static int ioctl_internal_command(struct scsi_device *sdev, char *cmd,
int result;
struct scsi_sense_hdr sshdr;
+ result = sdev_early_check(sdev);
+ if (result)
+ return result;
+
SCSI_LOG_IOCTL(1, printk("Trying ioctl with scsi command %d\n", *cmd));
result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0,
@@ -194,10 +205,11 @@ static int scsi_ioctl_get_pci(struct scsi_device *sdev, void __user *arg)
int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
char scsi_cmd[MAX_COMMAND_SIZE];
+ int result;
- /* No idea how this happens.... */
- if (!sdev)
- return -ENXIO;
+ result = sdev_early_check(sdev);
+ if (result)
+ return result;
/*
* If we are in the middle of error recovery, don't let anyone
@@ -288,6 +300,10 @@ int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd,
{
int val, result;
+ result = sdev_early_check(sdev);
+ if (result)
+ return result;
+
/* The first set of iocts may be executed even if we're doing
* error processing, as long as the device was opened
* non-blocking */
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 19:52 ` Parag Warudkar
@ 2011-05-25 20:03 ` Linus Torvalds
-1 siblings, 0 replies; 47+ messages in thread
From: Linus Torvalds @ 2011-05-25 20:03 UTC (permalink / raw)
To: Parag Warudkar
Cc: Jens Axboe, linux-kernel, James.Bottomley, akpm, Linux SCSI List
On Wed, May 25, 2011 at 12:52 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
>
> +static inline int sdev_early_check(struct scsi_device *sdev)
> +{
> + if (!sdev || sdev->sdev_state == SDEV_DEL
> + || sdev->sdev_state > SDEV_QUIESCE)
> + return -ENXIO;
> + return 0;
> +}
Can somebody explain why it's those states, and nothing else?
Quite frankly, if it's about "don't oops on sdev->queue not existing",
then test for that. Not for some random and uncommented list of
states.
Linus
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-25 20:03 ` Linus Torvalds
0 siblings, 0 replies; 47+ messages in thread
From: Linus Torvalds @ 2011-05-25 20:03 UTC (permalink / raw)
To: Parag Warudkar
Cc: Jens Axboe, linux-kernel, James.Bottomley, akpm, Linux SCSI List
On Wed, May 25, 2011 at 12:52 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
>
> +static inline int sdev_early_check(struct scsi_device *sdev)
> +{
> + if (!sdev || sdev->sdev_state == SDEV_DEL
> + || sdev->sdev_state > SDEV_QUIESCE)
> + return -ENXIO;
> + return 0;
> +}
Can somebody explain why it's those states, and nothing else?
Quite frankly, if it's about "don't oops on sdev->queue not existing",
then test for that. Not for some random and uncommented list of
states.
Linus
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 20:03 ` Linus Torvalds
@ 2011-05-25 20:18 ` Parag Warudkar
-1 siblings, 0 replies; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 20:18 UTC (permalink / raw)
To: Linus Torvalds
Cc: Parag Warudkar, Jens Axboe, linux-kernel, James.Bottomley, akpm,
Linux SCSI List
[-- Attachment #1: Type: TEXT/PLAIN, Size: 2175 bytes --]
On Wed, 25 May 2011, Linus Torvalds wrote:
> On Wed, May 25, 2011 at 12:52 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
> >
> > +static inline int sdev_early_check(struct scsi_device *sdev)
> > +{
> > + if (!sdev || sdev->sdev_state == SDEV_DEL
> > + || sdev->sdev_state > SDEV_QUIESCE)
> > + return -ENXIO;
> > + return 0;
> > +}
>
> Can somebody explain why it's those states, and nothing else?
>
> Quite frankly, if it's about "don't oops on sdev->queue not existing",
> then test for that. Not for some random and uncommented list of
> states.
List of states and what commands if any are accepeted for each state are
explained in scsi_device.h enum definition of scsi_device_state :
enum scsi_device_state {
SDEV_CREATED = 1, /* device created but not added to sysfs
* Only internal commands allowed (for
inq) */
SDEV_RUNNING, /* device properly configured
* All commands allowed */
SDEV_CANCEL, /* beginning to delete device
* Only error handler commands allowed */
SDEV_DEL, /* device deleted
* no commands allowed */
SDEV_QUIESCE, /* Device quiescent. No block commands
* will be accepted, only specials (which
* originate in the mid-layer) */
SDEV_OFFLINE, /* Device offlined (by error handling or
* user request */
SDEV_BLOCK, /* Device blocked by scsi lld. No
* scsi commands from user or midlayer
* should be issued to the scsi
* lld. */
SDEV_CREATED_BLOCK, /* same as above but for created devices
*/
};
In this case - we check for cases where no commands are allowed and reject
those right away, leaving prep_state_check to do filtering at lower level
for which commands are allowed and which are not as the state permits.
Parag
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-25 20:18 ` Parag Warudkar
0 siblings, 0 replies; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 20:18 UTC (permalink / raw)
To: Linus Torvalds
Cc: Parag Warudkar, Jens Axboe, linux-kernel, James.Bottomley, akpm,
Linux SCSI List
[-- Attachment #1: Type: TEXT/PLAIN, Size: 2175 bytes --]
On Wed, 25 May 2011, Linus Torvalds wrote:
> On Wed, May 25, 2011 at 12:52 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
> >
> > +static inline int sdev_early_check(struct scsi_device *sdev)
> > +{
> > + if (!sdev || sdev->sdev_state == SDEV_DEL
> > + || sdev->sdev_state > SDEV_QUIESCE)
> > + return -ENXIO;
> > + return 0;
> > +}
>
> Can somebody explain why it's those states, and nothing else?
>
> Quite frankly, if it's about "don't oops on sdev->queue not existing",
> then test for that. Not for some random and uncommented list of
> states.
List of states and what commands if any are accepeted for each state are
explained in scsi_device.h enum definition of scsi_device_state :
enum scsi_device_state {
SDEV_CREATED = 1, /* device created but not added to sysfs
* Only internal commands allowed (for
inq) */
SDEV_RUNNING, /* device properly configured
* All commands allowed */
SDEV_CANCEL, /* beginning to delete device
* Only error handler commands allowed */
SDEV_DEL, /* device deleted
* no commands allowed */
SDEV_QUIESCE, /* Device quiescent. No block commands
* will be accepted, only specials (which
* originate in the mid-layer) */
SDEV_OFFLINE, /* Device offlined (by error handling or
* user request */
SDEV_BLOCK, /* Device blocked by scsi lld. No
* scsi commands from user or midlayer
* should be issued to the scsi
* lld. */
SDEV_CREATED_BLOCK, /* same as above but for created devices
*/
};
In this case - we check for cases where no commands are allowed and reject
those right away, leaving prep_state_check to do filtering at lower level
for which commands are allowed and which are not as the state permits.
Parag
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 20:03 ` Linus Torvalds
(?)
(?)
@ 2011-05-25 20:20 ` James Bottomley
2011-05-25 20:22 ` Parag Warudkar
-1 siblings, 1 reply; 47+ messages in thread
From: James Bottomley @ 2011-05-25 20:20 UTC (permalink / raw)
To: Linus Torvalds
Cc: Parag Warudkar, Jens Axboe, linux-kernel, akpm, Linux SCSI List
On Wed, 2011-05-25 at 13:03 -0700, Linus Torvalds wrote:
> On Wed, May 25, 2011 at 12:52 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
> >
> > +static inline int sdev_early_check(struct scsi_device *sdev)
> > +{
> > + if (!sdev || sdev->sdev_state == SDEV_DEL
> > + || sdev->sdev_state > SDEV_QUIESCE)
> > + return -ENXIO;
> > + return 0;
> > +}
>
> Can somebody explain why it's those states, and nothing else?
The states are definitely wrong. QUIESCE shouldn't cause an error.
Can we back up a bit. I agree with Jens that sdev->request_queue looks
to be NULL, but that *only* happens in the final sdev release, so this
must be a refcounting problem higher up the stack. Something is holding
an unrefcounted pointer to the sdev.
James
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 20:20 ` James Bottomley
@ 2011-05-25 20:22 ` Parag Warudkar
2011-05-25 20:29 ` James Bottomley
0 siblings, 1 reply; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 20:22 UTC (permalink / raw)
To: James Bottomley
Cc: Linus Torvalds, Parag Warudkar, Jens Axboe, linux-kernel, akpm,
Linux SCSI List
On Wed, 25 May 2011, James Bottomley wrote:
> On Wed, 2011-05-25 at 13:03 -0700, Linus Torvalds wrote:
> > On Wed, May 25, 2011 at 12:52 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
> > >
> > > +static inline int sdev_early_check(struct scsi_device *sdev)
> > > +{
> > > + if (!sdev || sdev->sdev_state == SDEV_DEL
> > > + || sdev->sdev_state > SDEV_QUIESCE)
> > > + return -ENXIO;
> > > + return 0;
> > > +}
> >
> > Can somebody explain why it's those states, and nothing else?
>
> The states are definitely wrong. QUIESCE shouldn't cause an error.
>
QUIESCE is not causing an error above - > QUIESCE is which per the
documentation is correct.
Parag
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: __elv_add_request OOPS
2011-05-24 10:44 ` Jens Axboe
(?)
(?)
@ 2011-05-25 20:26 ` James Bottomley
-1 siblings, 0 replies; 47+ messages in thread
From: James Bottomley @ 2011-05-25 20:26 UTC (permalink / raw)
To: Jens Axboe; +Cc: Parag Warudkar, linux-kernel, Linux SCSI List
On Tue, 2011-05-24 at 12:44 +0200, Jens Axboe wrote:
> On 2011-05-24 06:29, Parag Warudkar wrote:
> >
> > External DVD drive - connected when suspended, removed before resume.
> > Results in NULL pointer dereference in __blk_add_request on resume.
> >
> > *ffffffff811d6503: 48 89 58 08 mov %rbx,0x8(%rax) |
> > %ebx = ffff880131559020 <--- faulting instruction
> >
> > 48 89 58 08 appears only in list_add :
> >
> > static inline void list_add(struct list_head *new, struct list_head *head)
> > {
> > __list_add(new, head, head->next);
> > ffffffff81ac012c: 49 8b 04 24 mov (%r12),%rax
> > #ifndef CONFIG_DEBUG_LIST
> > static inline void __list_add(struct list_head *new,
> > struct list_head *prev,
> > struct list_head *next)
> > {
> > next->prev = new;
> > ffffffff81ac0130: 48 89 58 08 mov %rbx,0x8(%rax)
> >
> > AFAICS list_add is only called from one place in __elv_add_request :
> >
> > switch (where) {
> > case ELEVATOR_INSERT_REQUEUE:
> > case ELEVATOR_INSERT_FRONT:
> > rq->cmd_flags |= REQ_SOFTBARRIER;
> > ** list_add(&rq->queuelist, &q->queue_head);
> > break;
> >
> > Now, where is the patch? :)
>
> You forgot to attach it?
>
> This is clearly q == NULL, CC'ing James/linux-scsi. Oops left below.
Something strange is going on here. the q can't have been NULL when we
called blk_get_request() in scsi_execute() otherwise we'd have oopsed on
q->queue_lock, so it's not as simple as sdev->request_queue being NULL.
James
> > [18682.256362] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
> > [18682.256535] IP: [<ffffffff811d6503>] __elv_add_request+0x1e3/0x270
> > [18682.256603] PGD 0
> > [18682.256632] Oops: 0002 [#1] SMP
> > [18682.256686] CPU 2
> > [18682.256714] Modules linked in: nls_utf8 udf crc_itu_t usb_storage cryptd aes_x86_64 aes_generic fuse parport_pc ppdev dm_crypt kvm_intel joydev kvm binfmt_misc snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwlagn snd_hwdep snd_pcm mac80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd cfg80211 soundcore btusb uvcvideo snd_page_alloc bluetooth videodev v4l2_compat_ioctl32 psmouse ideapad_laptop serio_raw sparse_keymap lp intel_ips mac_hid parport ext4 mbcache jbd2 i915 ahci libahci libata drm_kms_helper drm i2c_algo_bit cfbcopyarea video cfbimgblt cfbfillrect atl1c
> > [18682.257659]
> > [18682.257685] Pid: 14069, comm: xdg-screensaver Not tainted 2.6.39+ #4 LENOVO 0876 /Base Board Product Name
> > [18682.257845] RIP: 0010:[<ffffffff811d6503>] [<ffffffff811d6503>] __elv_add_request+0x1e3/0x270
> > [18682.257964] RSP: 0018:ffff88009b3a19e8 EFLAGS: 00010006
> > [18682.258056] RAX: 0000000000000000 RBX: ffff880131559020 RCX: 0000000000000001
> > [18682.258152] RDX: 0000000000000001 RSI: ffff880131559020 RDI: ffff8801315f77d0
> > [18682.258248] RBP: ffff88009b3a1a08 R08: ffffffff811e1000 R09: ffff8801315f77d0
> > [18682.258343] R10: ffff8800b5085e40 R11: ffff8800b5085e40 R12: ffff8801315f77d0
> > [18682.258437] R13: 0000000000000001 R14: 0000000000000001 R15: ffff8800b5085e40
> > [18682.258529] FS: 0000000000000000(0000) GS:ffff880137c80000(0000) knlGS:0000000000000000
> > [18682.258636] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [18682.258712] CR2: 0000000000000008 CR3: 0000000001a03000 CR4: 00000000000006e0
> > [18682.258807] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > [18682.258898] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > [18682.258994] Process xdg-screensaver (pid: 14069, threadinfo ffff88009b3a0000, task ffff8800aff096b0)
> > [18682.259112] Stack:
> > [18682.259140] ffff8801315f77d0 ffff880131559020 0000000000000001 ffff88009b3a1c48
> > [18682.259249] ffff88009b3a1a38 ffffffff811e10a0 0000000000000000 ffff88009b3a1a48
> > [18682.259354] ffff880131559020 0000000000000000 ffff88009b3a1af8 ffffffff811e118e
> > [18682.259460] Call Trace:
> > [18682.259504] [<ffffffff811e10a0>] blk_execute_rq_nowait+0x60/0xc0
> > [18682.259587] [<ffffffff811e118e>] blk_execute_rq+0x8e/0x130
> > [18682.259668] [<ffffffff812db5bc>] scsi_execute+0xfc/0x160
> > [18682.259742] [<ffffffff812dc18f>] scsi_execute_req+0xbf/0x130
> > [18682.259821] [<ffffffff812d5c71>] ioctl_internal_command.clone.4+0x61/0x1b0
> > [18682.259914] [<ffffffff812d5e3e>] scsi_set_medium_removal+0x7e/0xb0
> > [18682.260000] [<ffffffff812ecfa0>] sr_lock_door+0x20/0x30
> > [18682.260075] [<ffffffff812f9da7>] cdrom_release+0x147/0x270
> > [18682.260153] [<ffffffff812ebac8>] sr_block_release+0x38/0x60
> > [18682.260233] [<ffffffff811730ac>] __blkdev_put+0x16c/0x1b0
> > [18682.260308] [<ffffffff81173129>] blkdev_put+0x39/0x150
> > [18682.260379] [<ffffffff81173264>] blkdev_close+0x24/0x30
> > [18682.260455] [<ffffffff81140fba>] fput+0xea/0x220
> > [18682.260521] [<ffffffff8113d396>] filp_close+0x66/0x90
> > [18682.260592] [<ffffffff8105c117>] put_files_struct+0x87/0xf0
> > [18682.260668] [<ffffffff8105c244>] exit_files+0x54/0x70
> > [18682.264275] [<ffffffff8105c72b>] do_exit+0x16b/0x860
> > [18682.267802] [<ffffffff811f6c2a>] ? trace_hardirqs_off_thunk+0x3a/0x6c
> > [18682.271512] [<ffffffff8105d0e8>] do_group_exit+0x58/0xd0
> > [18682.276948] [<ffffffff8105d177>] sys_exit_group+0x17/0x20
> > [18682.281121] [<ffffffff81485d42>] system_call_fastpath+0x16/0x1b
> > [18682.284603] Code: ff ff e9 90 fe ff ff 90 81 4b 40 00 08 00 00 48 89 df e8 c1 93 00 00 eb c1 0f 1f 80 00 00 00 00 81 4b 40 00 08 00 00 49 8b 04 24
> > [18682.284903] 89 58 08 48 89 03 4c 89 63 08 49 89 1c 24 eb 9e 0f 1f 40 00
> > [18682.290727] RIP [<ffffffff811d6503>] __elv_add_request+0x1e3/0x270
> > [18682.293189] RSP <ffff88009b3a19e8>
> > [18682.296075] CR2: 0000000000000008
> > [18682.358582] ---[ end trace 82dd699fdeb50b72 ]---
>
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 20:18 ` Parag Warudkar
@ 2011-05-25 20:26 ` Linus Torvalds
-1 siblings, 0 replies; 47+ messages in thread
From: Linus Torvalds @ 2011-05-25 20:26 UTC (permalink / raw)
To: Parag Warudkar
Cc: Jens Axboe, linux-kernel, James.Bottomley, akpm, Linux SCSI List
On Wed, May 25, 2011 at 1:18 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
> SDEV_OFFLINE, /* Device offlined (by error handling or
> * user request */
So how do you fix the error or online it again? No chance it should
have commands passed to it to do that?
I don't know. My point is that I don't see why we should look at the
state at this point at all. We do that _later_.
Linus
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-25 20:26 ` Linus Torvalds
0 siblings, 0 replies; 47+ messages in thread
From: Linus Torvalds @ 2011-05-25 20:26 UTC (permalink / raw)
To: Parag Warudkar
Cc: Jens Axboe, linux-kernel, James.Bottomley, akpm, Linux SCSI List
On Wed, May 25, 2011 at 1:18 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
> SDEV_OFFLINE, /* Device offlined (by error handling or
> * user request */
So how do you fix the error or online it again? No chance it should
have commands passed to it to do that?
I don't know. My point is that I don't see why we should look at the
state at this point at all. We do that _later_.
Linus
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 20:22 ` Parag Warudkar
@ 2011-05-25 20:29 ` James Bottomley
0 siblings, 0 replies; 47+ messages in thread
From: James Bottomley @ 2011-05-25 20:29 UTC (permalink / raw)
To: Parag Warudkar
Cc: Linus Torvalds, Jens Axboe, linux-kernel, akpm, Linux SCSI List
On Wed, 2011-05-25 at 16:22 -0400, Parag Warudkar wrote:
>
> On Wed, 25 May 2011, James Bottomley wrote:
>
> > On Wed, 2011-05-25 at 13:03 -0700, Linus Torvalds wrote:
> > > On Wed, May 25, 2011 at 12:52 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
> > > >
> > > > +static inline int sdev_early_check(struct scsi_device *sdev)
> > > > +{
> > > > + if (!sdev || sdev->sdev_state == SDEV_DEL
> > > > + || sdev->sdev_state > SDEV_QUIESCE)
> > > > + return -ENXIO;
> > > > + return 0;
> > > > +}
> > >
> > > Can somebody explain why it's those states, and nothing else?
> >
> > The states are definitely wrong. QUIESCE shouldn't cause an error.
> >
> QUIESCE is not causing an error above - > QUIESCE is which per the
> documentation is correct.
BLOCK means a similar thing.
James
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 20:26 ` Linus Torvalds
@ 2011-05-25 20:42 ` Parag Warudkar
-1 siblings, 0 replies; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 20:42 UTC (permalink / raw)
To: Linus Torvalds
Cc: Parag Warudkar, Jens Axboe, linux-kernel, James.Bottomley, akpm,
Linux SCSI List
[-- Attachment #1: Type: TEXT/PLAIN, Size: 761 bytes --]
On Wed, 25 May 2011, Linus Torvalds wrote:
> On Wed, May 25, 2011 at 1:18 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
> > SDEV_OFFLINE, /* Device offlined (by error handling or
> > * user request */
>
> So how do you fix the error or online it again? No chance it should
> have commands passed to it to do that?
Yeah - that makes sense. By that logic, looks like we can only disallow
for SDEV_DEL (if we decide to do that check here).
> I don't know. My point is that I don't see why we should look at the
> state at this point at all. We do that _later_.
If we can do it later, well and good. I just didn't think it would hurt to
check upfront in ioctl if we are dealing with a dead device.
Parag
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-25 20:42 ` Parag Warudkar
0 siblings, 0 replies; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 20:42 UTC (permalink / raw)
To: Linus Torvalds
Cc: Parag Warudkar, Jens Axboe, linux-kernel, James.Bottomley, akpm,
Linux SCSI List
[-- Attachment #1: Type: TEXT/PLAIN, Size: 761 bytes --]
On Wed, 25 May 2011, Linus Torvalds wrote:
> On Wed, May 25, 2011 at 1:18 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
> > SDEV_OFFLINE, /* Device offlined (by error handling or
> > * user request */
>
> So how do you fix the error or online it again? No chance it should
> have commands passed to it to do that?
Yeah - that makes sense. By that logic, looks like we can only disallow
for SDEV_DEL (if we decide to do that check here).
> I don't know. My point is that I don't see why we should look at the
> state at this point at all. We do that _later_.
If we can do it later, well and good. I just didn't think it would hurt to
check upfront in ioctl if we are dealing with a dead device.
Parag
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 20:42 ` Parag Warudkar
(?)
@ 2011-05-25 20:52 ` James Bottomley
2011-05-25 23:00 ` Parag Warudkar
2011-05-27 3:53 ` James Bottomley
-1 siblings, 2 replies; 47+ messages in thread
From: James Bottomley @ 2011-05-25 20:52 UTC (permalink / raw)
To: Parag Warudkar
Cc: Linus Torvalds, Jens Axboe, linux-kernel, akpm, Linux SCSI List
On Wed, 2011-05-25 at 16:42 -0400, Parag Warudkar wrote:
> Yeah - that makes sense. By that logic, looks like we can only disallow
> for SDEV_DEL (if we decide to do that check here).
I don't think this is the root cause. I think q is non-NULL but has
already been released, so we're just getting a NULL deref on the actual
list head.
Does this fix it? It adds the refcounting at approximately the correct
places. Of course, we'll now be trying elevator operations on an extant
queue but one whose elevator functions have been destroyed, so there are
probably additional state guards to place.
James
---
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 58584dc..44e8ca3 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -297,7 +297,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
kfree(sdev);
goto out;
}
-
+ blk_get_queue(sdev->request_queue);
sdev->request_queue->queuedata = sdev;
scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index e639125..e0bd3f7 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -322,6 +322,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)
kfree(evt);
}
+ blk_put_queue(sdev->request_queue);
/* NULL queue means the device can't be used */
sdev->request_queue = NULL;
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 20:52 ` James Bottomley
@ 2011-05-25 23:00 ` Parag Warudkar
2011-05-25 23:14 ` Linus Torvalds
[not found] ` <1306370123.1641.76.camel@mulgrave.site>
2011-05-27 3:53 ` James Bottomley
1 sibling, 2 replies; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 23:00 UTC (permalink / raw)
To: James Bottomley
Cc: Linus Torvalds, Jens Axboe, linux-kernel, akpm, Linux SCSI List
On Wed, May 25, 2011 at 4:52 PM, James Bottomley
<James.Bottomley@hansenpartnership.com> wrote:
> On Wed, 2011-05-25 at 16:42 -0400, Parag Warudkar wrote:
>> Yeah - that makes sense. By that logic, looks like we can only disallow
>> for SDEV_DEL (if we decide to do that check here).
>
> I don't think this is the root cause. I think q is non-NULL but has
> already been released, so we're just getting a NULL deref on the actual
> list head.
>
> Does this fix it? It adds the refcounting at approximately the correct
> places. Of course, we'll now be trying elevator operations on an extant
> queue but one whose elevator functions have been destroyed, so there are
> probably additional state guards to place.
[ Resend with URL - I got a bounce back from vger for attaching the OOPS JPEG ]
It doesn't seem to help. Machine locked up and I was dropped to text
console. I could only capture the oops by a camera.
OOPS available at below URLs [*]
Parag
[*] https://picasaweb.google.com/lh/photo/yccmqaz3xwumwjvecb-b0pTdDOYIfFRksMrZBIo-Inw?feat=directlink
[*] https://picasaweb.google.com/lh/photo/Lim6d3b8p7Lj4D3nHmkbFJTdDOYIfFRksMrZBIo-Inw?feat=directlink
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 23:00 ` Parag Warudkar
@ 2011-05-25 23:14 ` Linus Torvalds
2011-05-25 23:45 ` Parag Warudkar
[not found] ` <1306370123.1641.76.camel@mulgrave.site>
1 sibling, 1 reply; 47+ messages in thread
From: Linus Torvalds @ 2011-05-25 23:14 UTC (permalink / raw)
To: Parag Warudkar
Cc: James Bottomley, Jens Axboe, linux-kernel, akpm, Linux SCSI List
On Wed, May 25, 2011 at 4:00 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
>
> It doesn't seem to help. Machine locked up and I was dropped to text
> console. I could only capture the oops by a camera.
Hmm. That's a different oops. It is now in scsi_prep_state_check().
At the beginning of it too. You can't see the "Code: " line in the
pictures, but the only dereference I see there is "sdev" itself being
NULL. And %cr2 is 0x640, which would seem to agree (the 'sdev'
structure is absolutely disgustingly big, and sdev->sdev_state is
indeed at an offset in that region.
That 'sdev' comes from scsi_prep_fn() doing
struct scsi_device *sdev = q->queuedata;
is that queuedata perhaps cleared even if the queue itself stays
around due to refcounts?
Linus
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 23:14 ` Linus Torvalds
@ 2011-05-25 23:45 ` Parag Warudkar
2011-05-25 23:52 ` Linus Torvalds
0 siblings, 1 reply; 47+ messages in thread
From: Parag Warudkar @ 2011-05-25 23:45 UTC (permalink / raw)
To: Linus Torvalds
Cc: Parag Warudkar, James Bottomley, Jens Axboe, linux-kernel, akpm,
Linux SCSI List
On Wed, 25 May 2011, Linus Torvalds wrote:
> On Wed, May 25, 2011 at 4:00 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
> >
> > It doesn't seem to help. Machine locked up and I was dropped to text
> > console. I could only capture the oops by a camera.
>
> Hmm. That's a different oops. It is now in scsi_prep_state_check().
Different at top but the call trace upto scsi_set_medium_removal is the
same.
And since now we are upping the refcnt we keep the request queue around it
was kind of expected that it won't oops on the request queue.
>
> At the beginning of it too. You can't see the "Code: " line in the
> pictures, but the only dereference I see there is "sdev" itself being
> NULL. And %cr2 is 0x640, which would seem to agree (the 'sdev'
> structure is absolutely disgustingly big, and sdev->sdev_state is
> indeed at an offset in that region.
>
> That 'sdev' comes from scsi_prep_fn() doing
>
> struct scsi_device *sdev = q->queuedata;
>
> is that queuedata perhaps cleared even if the queue itself stays
> around due to refcounts?
So now the issue is with scsi_device refcnt?
Parag
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 23:45 ` Parag Warudkar
@ 2011-05-25 23:52 ` Linus Torvalds
0 siblings, 0 replies; 47+ messages in thread
From: Linus Torvalds @ 2011-05-25 23:52 UTC (permalink / raw)
To: Parag Warudkar
Cc: James Bottomley, Jens Axboe, linux-kernel, akpm, Linux SCSI List
On Wed, May 25, 2011 at 4:45 PM, Parag Warudkar <parag.lkml@gmail.com> wrote:
>
> So now the issue is with scsi_device refcnt?
No, I'd guess that the problem is just that __scsi_remove_device()
sets queuedata to NULL. Afaik, both sdev and the queue actually stay
around.
That said, I don't have very high opinions of some of the SCSI code.
And that's me being polite. The thing is a overcomplicated mess of
indirection and pointers back-and-forth. The refcounting is crazy
and/or impossible, since the pointers really do go back-and-forth.
Linus
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
[not found] ` <1306370123.1641.76.camel@mulgrave.site>
@ 2011-05-26 1:01 ` Linus Torvalds
2011-05-26 1:06 ` James Bottomley
2011-05-26 1:43 ` Parag Warudkar
1 sibling, 1 reply; 47+ messages in thread
From: Linus Torvalds @ 2011-05-26 1:01 UTC (permalink / raw)
To: James Bottomley
Cc: Parag Warudkar, Jens Axboe, linux-kernel, akpm, Linux SCSI List
On Wed, May 25, 2011 at 5:35 PM, James Bottomley
<James.Bottomley@hansenpartnership.com> wrote:
>
> Jens, can you look at this, please ... would you prefer a separate DEAD
> test instead? Incidentally, this is in addition to the other DEAD test
> you still haven't applied ...
Ugh.
Can you please just always set STOPPED at the same time you set DEAD?
Linus
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-26 1:01 ` Linus Torvalds
@ 2011-05-26 1:06 ` James Bottomley
0 siblings, 0 replies; 47+ messages in thread
From: James Bottomley @ 2011-05-26 1:06 UTC (permalink / raw)
To: Linus Torvalds
Cc: Parag Warudkar, Jens Axboe, linux-kernel, akpm, Linux SCSI List
On Wed, 2011-05-25 at 18:01 -0700, Linus Torvalds wrote:
> On Wed, May 25, 2011 at 5:35 PM, James Bottomley
> <James.Bottomley@hansenpartnership.com> wrote: > > Jens, can you look
> at this, please ... would you prefer a separate DEAD > test instead?
> Incidentally, this is in addition to the other DEAD test > you still
> haven't applied ...
>
> Ugh.
>
> Can you please just always set STOPPED at the same time you set DEAD?
Well, Jens wondered the same thing in this thread:
http://marc.info/?l=linux-scsi&m=130632292705404
It's just an RFC patch to see if I can fix an oops ... how it's
ultimately implemented will be up to Jens.
James
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
[not found] ` <1306370123.1641.76.camel@mulgrave.site>
2011-05-26 1:01 ` Linus Torvalds
@ 2011-05-26 1:43 ` Parag Warudkar
1 sibling, 0 replies; 47+ messages in thread
From: Parag Warudkar @ 2011-05-26 1:43 UTC (permalink / raw)
To: James Bottomley
Cc: Parag Warudkar, Linus Torvalds, Jens Axboe, linux-kernel, akpm,
Linux SCSI List
On Wed, 25 May 2011, James Bottomley wrote:
> so, hopefully, applying this on top will now fix it.
>
Yeah seems to be OK with that patch on top of the previous one - thanks.
Now I am left with 2 more unrelated suspend/resume issues to report.
Parag
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-25 20:52 ` James Bottomley
2011-05-25 23:00 ` Parag Warudkar
@ 2011-05-27 3:53 ` James Bottomley
2011-05-27 5:43 ` Jens Axboe
1 sibling, 1 reply; 47+ messages in thread
From: James Bottomley @ 2011-05-27 3:53 UTC (permalink / raw)
To: Parag Warudkar
Cc: Linus Torvalds, Jens Axboe, linux-kernel, akpm, Linux SCSI List
On Wed, 2011-05-25 at 15:52 -0500, James Bottomley wrote:
> On Wed, 2011-05-25 at 16:42 -0400, Parag Warudkar wrote:
> > Yeah - that makes sense. By that logic, looks like we can only disallow
> > for SDEV_DEL (if we decide to do that check here).
>
> I don't think this is the root cause. I think q is non-NULL but has
> already been released, so we're just getting a NULL deref on the actual
> list head.
>
> Does this fix it? It adds the refcounting at approximately the correct
> places. Of course, we'll now be trying elevator operations on an extant
> queue but one whose elevator functions have been destroyed, so there are
> probably additional state guards to place.
>
> James
>
> ---
>
> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
> index 58584dc..44e8ca3 100644
> --- a/drivers/scsi/scsi_scan.c
> +++ b/drivers/scsi/scsi_scan.c
> @@ -297,7 +297,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
> kfree(sdev);
> goto out;
> }
> -
> + blk_get_queue(sdev->request_queue);
Apparently we can't do this because blk_[put|get]_queue aren't exported
for use in modules (and SCSI can be modular), so this caused a build
failure in linux-next.
James
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-27 3:53 ` James Bottomley
@ 2011-05-27 5:43 ` Jens Axboe
2011-05-27 20:21 ` James Bottomley
0 siblings, 1 reply; 47+ messages in thread
From: Jens Axboe @ 2011-05-27 5:43 UTC (permalink / raw)
To: James Bottomley
Cc: Parag Warudkar, Linus Torvalds, linux-kernel, akpm, Linux SCSI List
On 2011-05-27 05:53, James Bottomley wrote:
> On Wed, 2011-05-25 at 15:52 -0500, James Bottomley wrote:
>> On Wed, 2011-05-25 at 16:42 -0400, Parag Warudkar wrote:
>>> Yeah - that makes sense. By that logic, looks like we can only disallow
>>> for SDEV_DEL (if we decide to do that check here).
>>
>> I don't think this is the root cause. I think q is non-NULL but has
>> already been released, so we're just getting a NULL deref on the actual
>> list head.
>>
>> Does this fix it? It adds the refcounting at approximately the correct
>> places. Of course, we'll now be trying elevator operations on an extant
>> queue but one whose elevator functions have been destroyed, so there are
>> probably additional state guards to place.
>>
>> James
>>
>> ---
>>
>> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
>> index 58584dc..44e8ca3 100644
>> --- a/drivers/scsi/scsi_scan.c
>> +++ b/drivers/scsi/scsi_scan.c
>> @@ -297,7 +297,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
>> kfree(sdev);
>> goto out;
>> }
>> -
>> + blk_get_queue(sdev->request_queue);
>
> Apparently we can't do this because blk_[put|get]_queue aren't exported
> for use in modules (and SCSI can be modular), so this caused a build
> failure in linux-next.
I'll just export them.
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-27 5:43 ` Jens Axboe
@ 2011-05-27 20:21 ` James Bottomley
0 siblings, 0 replies; 47+ messages in thread
From: James Bottomley @ 2011-05-27 20:21 UTC (permalink / raw)
To: Jens Axboe
Cc: Parag Warudkar, Linus Torvalds, linux-kernel, akpm, Linux SCSI List
On Fri, 2011-05-27 at 07:43 +0200, Jens Axboe wrote:
> On 2011-05-27 05:53, James Bottomley wrote:
> > On Wed, 2011-05-25 at 15:52 -0500, James Bottomley wrote:
> >> On Wed, 2011-05-25 at 16:42 -0400, Parag Warudkar wrote:
> >>> Yeah - that makes sense. By that logic, looks like we can only disallow
> >>> for SDEV_DEL (if we decide to do that check here).
> >>
> >> I don't think this is the root cause. I think q is non-NULL but has
> >> already been released, so we're just getting a NULL deref on the actual
> >> list head.
> >>
> >> Does this fix it? It adds the refcounting at approximately the correct
> >> places. Of course, we'll now be trying elevator operations on an extant
> >> queue but one whose elevator functions have been destroyed, so there are
> >> probably additional state guards to place.
> >>
> >> James
> >>
> >> ---
> >>
> >> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
> >> index 58584dc..44e8ca3 100644
> >> --- a/drivers/scsi/scsi_scan.c
> >> +++ b/drivers/scsi/scsi_scan.c
> >> @@ -297,7 +297,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
> >> kfree(sdev);
> >> goto out;
> >> }
> >> -
> >> + blk_get_queue(sdev->request_queue);
> >
> > Apparently we can't do this because blk_[put|get]_queue aren't exported
> > for use in modules (and SCSI can be modular), so this caused a build
> > failure in linux-next.
>
> I'll just export them.
OK, if you're fine with that, how does this patch look?
I can take it through my rc-fixes tree (with your ack), since I'm a bit
late on the merge window now.
James
---
From: James Bottomley <James.Bottomley@HansenPartnership.com>
Subject: [PATCH] [SCSI] Fix oops caused by queue refcounting failure
In certain circumstances, we can get an oops from a torn down device.
Most notably this is from CD roms trying to call scsi_ioctl. The root
cause of the problem is the fact that after scsi_remove_device() has
been called, the queue is fully torn down. This is actually wrong
since the queue can be used until the sdev release function is called.
Therefore, we add an extra reference to the queue which is released in
sdev->release, so the queue always exists.
Also export blk_queue_get/blk_queue_put for the refcounting.
Reported-by: Parag Warudkar <parag.lkml@gmail.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
diff --git a/block/blk-core.c b/block/blk-core.c
index 3fe00a1..1aa776c 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -345,6 +345,7 @@ void blk_put_queue(struct request_queue *q)
{
kobject_put(&q->kobj);
}
+EXPORT_SYMBOL_GPL(blk_put_queue);
/*
* Note: If a driver supplied the queue lock, it should not zap that lock
@@ -566,6 +567,7 @@ int blk_get_queue(struct request_queue *q)
return 1;
}
+EXPORT_SYMBOL_GPL(blk_get_queue);
static inline void blk_free_request(struct request_queue *q, struct request *rq)
{
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 58584dc..44e8ca3 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -297,7 +297,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
kfree(sdev);
goto out;
}
-
+ blk_get_queue(sdev->request_queue);
sdev->request_queue->queuedata = sdev;
scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index e639125..e0bd3f7 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -322,6 +322,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)
kfree(evt);
}
+ blk_put_queue(sdev->request_queue);
/* NULL queue means the device can't be used */
sdev->request_queue = NULL;
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-27 20:21 ` James Bottomley
0 siblings, 0 replies; 47+ messages in thread
From: James Bottomley @ 2011-05-27 20:21 UTC (permalink / raw)
To: Jens Axboe
Cc: Parag Warudkar, Linus Torvalds, linux-kernel, akpm, Linux SCSI List
On Fri, 2011-05-27 at 07:43 +0200, Jens Axboe wrote:
> On 2011-05-27 05:53, James Bottomley wrote:
> > On Wed, 2011-05-25 at 15:52 -0500, James Bottomley wrote:
> >> On Wed, 2011-05-25 at 16:42 -0400, Parag Warudkar wrote:
> >>> Yeah - that makes sense. By that logic, looks like we can only disallow
> >>> for SDEV_DEL (if we decide to do that check here).
> >>
> >> I don't think this is the root cause. I think q is non-NULL but has
> >> already been released, so we're just getting a NULL deref on the actual
> >> list head.
> >>
> >> Does this fix it? It adds the refcounting at approximately the correct
> >> places. Of course, we'll now be trying elevator operations on an extant
> >> queue but one whose elevator functions have been destroyed, so there are
> >> probably additional state guards to place.
> >>
> >> James
> >>
> >> ---
> >>
> >> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
> >> index 58584dc..44e8ca3 100644
> >> --- a/drivers/scsi/scsi_scan.c
> >> +++ b/drivers/scsi/scsi_scan.c
> >> @@ -297,7 +297,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
> >> kfree(sdev);
> >> goto out;
> >> }
> >> -
> >> + blk_get_queue(sdev->request_queue);
> >
> > Apparently we can't do this because blk_[put|get]_queue aren't exported
> > for use in modules (and SCSI can be modular), so this caused a build
> > failure in linux-next.
>
> I'll just export them.
OK, if you're fine with that, how does this patch look?
I can take it through my rc-fixes tree (with your ack), since I'm a bit
late on the merge window now.
James
---
From: James Bottomley <James.Bottomley@HansenPartnership.com>
Subject: [PATCH] [SCSI] Fix oops caused by queue refcounting failure
In certain circumstances, we can get an oops from a torn down device.
Most notably this is from CD roms trying to call scsi_ioctl. The root
cause of the problem is the fact that after scsi_remove_device() has
been called, the queue is fully torn down. This is actually wrong
since the queue can be used until the sdev release function is called.
Therefore, we add an extra reference to the queue which is released in
sdev->release, so the queue always exists.
Also export blk_queue_get/blk_queue_put for the refcounting.
Reported-by: Parag Warudkar <parag.lkml@gmail.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
diff --git a/block/blk-core.c b/block/blk-core.c
index 3fe00a1..1aa776c 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -345,6 +345,7 @@ void blk_put_queue(struct request_queue *q)
{
kobject_put(&q->kobj);
}
+EXPORT_SYMBOL_GPL(blk_put_queue);
/*
* Note: If a driver supplied the queue lock, it should not zap that lock
@@ -566,6 +567,7 @@ int blk_get_queue(struct request_queue *q)
return 1;
}
+EXPORT_SYMBOL_GPL(blk_get_queue);
static inline void blk_free_request(struct request_queue *q, struct request *rq)
{
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 58584dc..44e8ca3 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -297,7 +297,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
kfree(sdev);
goto out;
}
-
+ blk_get_queue(sdev->request_queue);
sdev->request_queue->queuedata = sdev;
scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index e639125..e0bd3f7 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -322,6 +322,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)
kfree(evt);
}
+ blk_put_queue(sdev->request_queue);
/* NULL queue means the device can't be used */
sdev->request_queue = NULL;
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-27 20:21 ` James Bottomley
@ 2011-05-28 12:42 ` Jens Axboe
-1 siblings, 0 replies; 47+ messages in thread
From: Jens Axboe @ 2011-05-28 12:42 UTC (permalink / raw)
To: James Bottomley
Cc: Parag Warudkar, Linus Torvalds, linux-kernel, akpm, Linux SCSI List
On 2011-05-27 22:21, James Bottomley wrote:
> On Fri, 2011-05-27 at 07:43 +0200, Jens Axboe wrote:
>> On 2011-05-27 05:53, James Bottomley wrote:
>>> On Wed, 2011-05-25 at 15:52 -0500, James Bottomley wrote:
>>>> On Wed, 2011-05-25 at 16:42 -0400, Parag Warudkar wrote:
>>>>> Yeah - that makes sense. By that logic, looks like we can only disallow
>>>>> for SDEV_DEL (if we decide to do that check here).
>>>>
>>>> I don't think this is the root cause. I think q is non-NULL but has
>>>> already been released, so we're just getting a NULL deref on the actual
>>>> list head.
>>>>
>>>> Does this fix it? It adds the refcounting at approximately the correct
>>>> places. Of course, we'll now be trying elevator operations on an extant
>>>> queue but one whose elevator functions have been destroyed, so there are
>>>> probably additional state guards to place.
>>>>
>>>> James
>>>>
>>>> ---
>>>>
>>>> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
>>>> index 58584dc..44e8ca3 100644
>>>> --- a/drivers/scsi/scsi_scan.c
>>>> +++ b/drivers/scsi/scsi_scan.c
>>>> @@ -297,7 +297,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
>>>> kfree(sdev);
>>>> goto out;
>>>> }
>>>> -
>>>> + blk_get_queue(sdev->request_queue);
>>>
>>> Apparently we can't do this because blk_[put|get]_queue aren't exported
>>> for use in modules (and SCSI can be modular), so this caused a build
>>> failure in linux-next.
>>
>> I'll just export them.
>
> OK, if you're fine with that, how does this patch look?
Outdated :-)
I already merged the export addition:
commit d86e0e83b32bc84600adb0b6ea1fce389b266682
Author: Jens Axboe <jaxboe@fusionio.com>
Date: Fri May 27 07:44:43 2011 +0200
block: export blk_{get,put}_queue()
> I can take it through my rc-fixes tree (with your ack), since I'm a bit
> late on the merge window now.
Only the SCSI bit remains, so add at will. You can add my acked-by to
that standalone, if you wish.
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-05-28 12:42 ` Jens Axboe
0 siblings, 0 replies; 47+ messages in thread
From: Jens Axboe @ 2011-05-28 12:42 UTC (permalink / raw)
To: James Bottomley
Cc: Parag Warudkar, Linus Torvalds, linux-kernel, akpm, Linux SCSI List
On 2011-05-27 22:21, James Bottomley wrote:
> On Fri, 2011-05-27 at 07:43 +0200, Jens Axboe wrote:
>> On 2011-05-27 05:53, James Bottomley wrote:
>>> On Wed, 2011-05-25 at 15:52 -0500, James Bottomley wrote:
>>>> On Wed, 2011-05-25 at 16:42 -0400, Parag Warudkar wrote:
>>>>> Yeah - that makes sense. By that logic, looks like we can only disallow
>>>>> for SDEV_DEL (if we decide to do that check here).
>>>>
>>>> I don't think this is the root cause. I think q is non-NULL but has
>>>> already been released, so we're just getting a NULL deref on the actual
>>>> list head.
>>>>
>>>> Does this fix it? It adds the refcounting at approximately the correct
>>>> places. Of course, we'll now be trying elevator operations on an extant
>>>> queue but one whose elevator functions have been destroyed, so there are
>>>> probably additional state guards to place.
>>>>
>>>> James
>>>>
>>>> ---
>>>>
>>>> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
>>>> index 58584dc..44e8ca3 100644
>>>> --- a/drivers/scsi/scsi_scan.c
>>>> +++ b/drivers/scsi/scsi_scan.c
>>>> @@ -297,7 +297,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
>>>> kfree(sdev);
>>>> goto out;
>>>> }
>>>> -
>>>> + blk_get_queue(sdev->request_queue);
>>>
>>> Apparently we can't do this because blk_[put|get]_queue aren't exported
>>> for use in modules (and SCSI can be modular), so this caused a build
>>> failure in linux-next.
>>
>> I'll just export them.
>
> OK, if you're fine with that, how does this patch look?
Outdated :-)
I already merged the export addition:
commit d86e0e83b32bc84600adb0b6ea1fce389b266682
Author: Jens Axboe <jaxboe@fusionio.com>
Date: Fri May 27 07:44:43 2011 +0200
block: export blk_{get,put}_queue()
> I can take it through my rc-fixes tree (with your ack), since I'm a bit
> late on the merge window now.
Only the SCSI bit remains, so add at will. You can add my acked-by to
that standalone, if you wish.
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
2011-05-27 20:21 ` James Bottomley
@ 2011-06-08 6:50 ` Torsten Hilbrich
-1 siblings, 0 replies; 47+ messages in thread
From: Torsten Hilbrich @ 2011-06-08 6:50 UTC (permalink / raw)
To: James Bottomley
Cc: Jens Axboe, Parag Warudkar, Linus Torvalds, linux-kernel, akpm,
Linux SCSI List
[-- Attachment #1: Type: text/plain, Size: 4506 bytes --]
Am 27.05.2011 22:21, schrieb James Bottomley:
> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
> index 58584dc..44e8ca3 100644
> --- a/drivers/scsi/scsi_scan.c
> +++ b/drivers/scsi/scsi_scan.c
> @@ -297,7 +297,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
> kfree(sdev);
> goto out;
> }
> -
> + blk_get_queue(sdev->request_queue);
> sdev->request_queue->queuedata = sdev;
> scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
>
> diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
> index e639125..e0bd3f7 100644
> --- a/drivers/scsi/scsi_sysfs.c
> +++ b/drivers/scsi/scsi_sysfs.c
> @@ -322,6 +322,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)
> kfree(evt);
> }
>
> + blk_put_queue(sdev->request_queue);
> /* NULL queue means the device can't be used */
> sdev->request_queue = NULL;
I did some testing with this patch (using 3.0rc2 for reproducing it upstream, but the same behaviour
with 2.6.39 and e73e079bf128d68284efedeba1fbbc18d78610f9 applied).
ext2 and ext3 FS on the USB sticks are working fine, however I get the following oops when performing
the same test with the CDROM part of a sandisk cruzer:
general protection fault: 0000 [#1] SMP
CPU 1
Modules linked in:
Pid: 1978, comm: umount Not tainted 3.0.0-rc2 #41 LENOVO 20077KG/20077KG
RIP: 0010:[<ffffffff81244590>] [<ffffffff81244590>] elv_may_queue+0x10/0x20
RSP: 0018:ffff88007be17aa8 EFLAGS: 00010097
RAX: 6b6b6b6b6b6b6b6b RBX: ffff88007bc628c0 RCX: 0000000000000010
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88007bc628c0
RBP: ffff88007be17aa8 R08: 0000000000000000 R09: ffff88007bc6f340
R10: ffff88007be17d08 R11: ffff88007be061c8 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: ffff88007bc6f340
FS: 00007f5f4ba89740(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5f4b12a355 CR3: 000000007be2f000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process umount (pid: 1978, threadinfo ffff88007be16000, task ffff88007cceb7b0)
Stack:
ffff88007be17b08 ffffffff8124b3ce ffff88007d19f5f8 ffff88007bd90188
ffff880000000010 ffffffff810f52a6 ffff88007be17b08 ffff88007bc628c0
0000000000000000 0000000000000010 ffff88007be17d08 ffff88007bc6f340
Call Trace:
[<ffffffff8124b3ce>] get_request+0x3e/0x380
[<ffffffff810f52a6>] ? kfree_debugcheck+0x16/0x40
[<ffffffff8124b739>] get_request_wait+0x29/0x190
[<ffffffff8124bc0d>] blk_get_request+0x6d/0x80
[<ffffffff8149a258>] scsi_execute+0x48/0x160
[<ffffffff8149a491>] ? scsi_execute_req+0x61/0x110
[<ffffffff8149a4d7>] scsi_execute_req+0xa7/0x110
[<ffffffff81493e0d>] T.752+0x4d/0x110
[<ffffffff810f5d68>] ? cache_free_debugcheck+0x198/0x250
[<ffffffff81493f36>] scsi_set_medium_removal+0x66/0x90
[<ffffffff81135c6a>] ? fsnotify_clear_marks_by_inode+0x2a/0xf0
[<ffffffff814d4670>] sr_lock_door+0x20/0x30
[<ffffffff816d05a7>] cdrom_release+0x137/0x250
[<ffffffff810f5d68>] ? cache_free_debugcheck+0x198/0x250
[<ffffffff811de45c>] ? isofs_destroy_inode+0x1c/0x20
[<ffffffff814d3a08>] sr_block_release+0x38/0x60
[<ffffffff81130cac>] __blkdev_put+0x16c/0x1b0
[<ffffffff81130d21>] blkdev_put+0x31/0x130
[<ffffffff810ffc3d>] kill_block_super+0x4d/0x80
[<ffffffff811003d5>] deactivate_locked_super+0x45/0x60
[<ffffffff8110100a>] deactivate_super+0x4a/0x70
[<ffffffff8111a98a>] mntput_no_expire+0x12a/0x1a0
[<ffffffff8111afb8>] sys_umount+0x78/0x3b0
[<ffffffff819cd3ab>] system_call_fastpath+0x16/0x1b
Code: 66 66 66 90 48 8b 47 18 48 8b 00 48 8b 40 68 48 85 c0 74 05 48 89 f7 ff d0 c9 c3 55 48 89 e5 66 66 66 66 90 48 8b 47 18 48 8b 00
8b 50 70 31 c0 48 85 d2 74 02 ff d2 c9 c3 90 55 48 89 e5 66
RIP [<ffffffff81244590>] elv_may_queue+0x10/0x20
RSP <ffff88007be17aa8>
---[ end trace a59ceb38f50c5e0c ]---
Steps to reproduce:
1. mount /dev/sr0 /mnt # Mount fails
2. umount /mnt # Message about not being mounted
3. mount /dev/sr0 /mnt # [sr0] messages appears in kernel log
4. remove USB stick # USB disconnect message
5. umount /mnt # above error message
I mount the /dev/sr0 in /mnt and remove it before calling umount. I had to repeat the mount as it seemed to fail the first time (calling umount /mnt in-between). The second mount succeeded with some errors reported by the sr0.
Full logs attached as text file.
Torsten
[-- Attachment #2: screenlog.0 --]
[-- Type: text/plain, Size: 51967 bytes --]
Linux version 3.0.0-rc2 (thilbrich@sn-be111) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41 SMP Tue Jun 7 13:06:34 CEST 2011
Command line: BOOT_IMAGE=/bzImage-ipsec-test root=/dev/sda1 ro single init=/bin/bash console=ttyS0,115200 console=tty0 loglevel=7
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI data)
BIOS-e820: 000000007fedf000 - 000000007ff00000 (ACPI NVS)
BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
No AGP bridge found
last_pfn = 0x7fed0 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f6810] f6810
init_memory_mapping: 0000000000000000-000000007fed0000
ACPI: RSDP 00000000000f67e0 00024 (v02 LENOVO)
ACPI: XSDT 000000007fed13c7 0008C (v01 LENOVO TP-79 00002180 LTP 00000000)
ACPI: FACP 000000007fed1500 000F4 (v03 LENOVO TP-79 00002180 LNVO 00000001)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110413/tbfadt-529)
ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110413/tbfadt-560)
ACPI: DSDT 000000007fed185e 0D3C2 (v01 LENOVO TP-79 00002180 MSFT 0100000E)
ACPI: FACS 000000007fef4000 00040
ACPI: SSDT 000000007fed16b4 001AA (v01 LENOVO TP-79 00002180 MSFT 0100000E)
ACPI: ECDT 000000007fedec20 00052 (v01 LENOVO TP-79 00002180 LNVO 00000001)
ACPI: TCPA 000000007fedec72 00032 (v02 LENOVO TP-79 00002180 LNVO 00000001)
ACPI: APIC 000000007fedeca4 00068 (v01 LENOVO TP-79 00002180 LNVO 00000001)
ACPI: MCFG 000000007feded0c 0003C (v01 LENOVO TP-79 00002180 LNVO 00000001)
ACPI: HPET 000000007feded48 00038 (v01 LENOVO TP-79 00002180 LNVO 00000001)
ACPI: SLIC 000000007fedee62 00176 (v01 LENOVO TP-79 00002180 LTP 00000000)
ACPI: BOOT 000000007fedefd8 00028 (v01 LENOVO TP-79 00002180 LTP 00000001)
ACPI: SSDT 000000007fef2697 0025F (v01 LENOVO TP-79 00002180 INTL 20050513)
ACPI: SSDT 000000007fef28f6 000A6 (v01 LENOVO TP-79 00002180 INTL 20050513)
ACPI: SSDT 000000007fef299c 004F7 (v01 LENOVO TP-79 00002180 INTL 20050513)
ACPI: SSDT 000000007fef2e93 001D8 (v01 LENOVO TP-79 00002180 INTL 20050513)
No NUMA configuration found
Faking a node at 0000000000000000-000000007fed0000
Initmem setup node 0 0000000000000000-000000007fed0000
NODE_DATA [000000007fec7000 - 000000007fecbfff]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fed0
ACPI: PM-Timer IO Port: 0x1008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88007fc00000 s70336 r8192 d23872 u1048576
Built 1 zonelists in Node order, mobility grouping on. Total pages: 516702
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/bzImage-ipsec-test root=/dev/sda1 ro single init=/bin/bash console=ttyS0,115200 console=tty0 loglevel=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 2045612k/2095936k available (10053k kernel code, 452k absent, 49872k reserved, 7108k data, 920k init)
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:512 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Fast TSC calibration using PIT
Detected 2161.314 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.62 BogoMIPS (lpj=2161314)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using mwait in idle threads.
ACPI: Core revision 20110413
ftrace: allocating 33379 entries in 131 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Booting Node 0, Processors #1 Ok.
TSC synchronization [CPU#0 -> CPU#1]:
Measured 669123 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (8644.94 BogoMIPS).
kworker/u:0 used greatest stack depth: 6048 bytes left
PM: Registering ACPI NVS region at 7fedf000 (135168 bytes)
NET: Registered protocol family 16
kworker/u:0 used greatest stack depth: 5664 bytes left
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: SSDT 000000007fef1d36 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 000000007fef203d 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 000000007fef1c6e 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 000000007fef1fb8 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PUBS] (on)
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 3 docks/bays found
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
cfg80211: Calling CRDA to update world regulatory domain
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: [io 0x1000-0x107f] has been reserved
system 00:02: [io 0x1180-0x11bf] has been reserved
system 00:02: [io 0x0800-0x080f] has been reserved
system 00:02: [io 0x15e0-0x15ef] has been reserved
system 00:02: [io 0x1600-0x165f] could not be reserved
system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xee120000-0xee13ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x4000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2: bridge window [io 0x6000-0x7fff]
pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
pci 0000:15:00.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref]
pci 0000:15:00.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
pci 0000:15:00.0: BAR 13: assigned [io 0xa000-0xa0ff]
pci 0000:15:00.0: BAR 14: assigned [io 0xa400-0xa4ff]
pci 0000:15:00.0: CardBus bridge to [bus 16-17]
pci 0000:15:00.0: bridge window [io 0xa000-0xa0ff]
pci 0000:15:00.0: bridge window [io 0xa400-0xa4ff]
pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref]
pci 0000:15:00.0: bridge window [mem 0x84000000-0x87ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 15-18]
pci 0000:00:1e.0: bridge window [io 0xa000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1e.0: enabling device (0005 -> 0007)
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Simple Boot Flag at 0x35 set to 0x1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 3995
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
acpi device:06: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input3
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (63 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (63 C)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Initializing Nozomi driver 2.1d
lp: driver loaded but no devices found
Non-volatile memory driver v1.3
intel_rng: FWH not detected
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: power state changed by ACPI to D0
radeon 0000:01:00.0: power state changed by ACPI to D0
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] initializing kernel modesetting (RV530 0x1002:0x71D4).
[drm] register mmio base: 0xEE100000
[drm] register mmio size: 65536
ATOM BIOS: Lenovo
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 1022806 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 1 quad pipes, 2 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x00040000).
radeon 0000:01:00.0: WB enabled
[drm] Loading R500 Microcode
[drm] radeon: ring at 0x0000000010001000
[drm] ring test succeeded in 10 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] LVDS
[drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm] Encoders:
[drm] LCD1: INTERNAL_LVTM1
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_KLDSCP_TMDS1
[drm] radeon: power management initialized
[drm] fb mappable at 0xD00C0000
[drm] vram apper at 0xD0000000
[drm] size 5914624
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 175x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
drm/i810 does not support SMP
[drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
parport_pc 00:0b: activated
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
HP CISS Driver (v 3.6.26)
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
pci 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1880-0x1887
hda: HL-DT-ST DVDRAM GSA-4083N, ATAPI CD/DVD-ROM drive
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
cdrom: Uniform CD-ROM driver Revision: 3.20
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 46
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:02:00.0: Disabling ASPM L0s L1
e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1a:6b:6d:52:3a
e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
sky2: driver version 1.28
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
hso: drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
cdc_ncm: 01-June-2011
usbcore: registered new interface driver cdc_ncm
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
libipw: 802.11 data/management/control stack, git-1.1.13
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
airo(): Probing for PCI adapters
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
airo(): Finished probing for PCI adapters
Loaded prism54 driver, version 1.2
ata1.00: ATA-7: HITACHI HTS541612J9SA00 3H, SB3IC7UP, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usbcore: registered new interface driver zd1211rw
usbcore: registered new interface driver rtl8187
usbcore: registered new interface driver zd1201
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2011 Intel Corporation
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
iwl3945: Copyright(c) 2003-2011 Intel Corporation
iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
usbcore: registered new interface driver rt73usb
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54161 SB3I PQ: 0 ANSI: 5
console [netcon0] enabled
netconsole: network logging started
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0c78, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000007
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0xa000-0xdfff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.0.0-rc2 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.0.0-rc2 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.0.0-rc2 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.0.0-rc2 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.0.0-rc2 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usb 1-6: new high speed USB device number 3 using ehci_hcd
usb 1-6: New USB device found, idVendor=04b3, idProduct=4485
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 2-2: new full speed USB device number 2 using uhci_hcd
usb 2-2: New USB device found, idVendor=0d46, idProduct=3003
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: KAAN SIM III
usb 2-2: Manufacturer: KOBIL
usb 2-2: SerialNumber: K_000000000
usb 5-1: new full speed USB device number 2 using uhci_hcd
usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: BCM2045B
usb 5-1: Manufacturer: Broadcom Corp
usb 5-2: new full speed USB device number 3 using uhci_hcd
usb 5-2: New USB device found, idVendor=0483, idProduct=2016
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Biometric Coprocessor
usb 5-2: Manufacturer: STMicroelectronics
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for Keyspan - (without firmware)
USB Serial support registered for Keyspan 1 port adapter
USB Serial support registered for Keyspan 2 port adapter
USB Serial support registered for Keyspan 4 port adapter
usbcore: registered new interface driver keyspan
keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for Qualcomm USB modem
usbcore: registered new interface driver qcserial
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
md: linear personality registered for level -1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
dell_wmi: No known WMI GUID found
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 79ETD8WW (2.18 ), EC 79HT50WW-1.07
thinkpad_acpi: Lenovo ThinkPad T60p, model 20077KG
thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
hdaps: inverting axis (3) readings
hdaps: LENOVO ThinkPad T60 detected
input: hdaps as /devices/platform/hdaps/input/input6
hdaps: driver successfully loaded
fujitsu_laptop: driver 0.6.0 successfully loaded
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:2010
ALSA device list:
#0: Dummy 1
#1: HDA Intel at 0xee400000 irq 49
#29: ThinkPad Console Audio Control at EC reg 0x30, fw 79HT50WW-1.07
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
registered taskstats version 1
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 164k freed
Freeing unused kernel memory: 1404k freed
groups used greatest stack depth: 4656 bytes left
bash used greatest stack depth: 4488 bytes left
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
mount used greatest stack depth: 4232 bytes left
usb 1-5: new high speed USB device number 6 using ehci_hcd
usb 1-5: New USB device found, idVendor=0781, idProduct=5406
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: U3 Cruzer Micro
usb 1-5: Manufacturer: SanDisk
usb 1-5: SerialNumber: 0774231405811B9E
scsi4 : usb-storage 1-5:1.0
scsi 4:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sdb] 3907583 512-byte logical blocks: (2.00 GB/1.86 GiB)
scsi 4:0:0:1: CD-ROM SanDisk Cruzer 7.01 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sr0: scsi3-mmc drive: 48x/48x tray
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb3
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
usb 1-5: USB disconnect, device number 6
usb 1-5: new high speed USB device number 7 using ehci_hcd
usb 1-5: New USB device found, idVendor=0781, idProduct=5406
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: U3 Cruzer Micro
usb 1-5: Manufacturer: SanDisk
usb 1-5: SerialNumber: 0774231405811B9E
scsi5 : usb-storage 1-5:1.0
scsi 5:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: [sdb] 3907583 512-byte logical blocks: (2.00 GB/1.86 GiB)
scsi 5:0:0:1: CD-ROM SanDisk Cruzer 7.01 PQ: 0 ANSI: 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] No Caching mode page present
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sr0: scsi3-mmc drive: 48x/48x tray
sd 5:0:0:0: [sdb] No Caching mode page present
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb3
sd 5:0:0:0: [sdb] No Caching mode page present
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f c0 00 00 02 00
end_request: I/O error, dev sr0, sector 130816
Buffer I/O error on device sr0, logical block 32704
Buffer I/O error on device sr0, logical block 32705
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f c0 00 00 02 00
end_request: I/O error, dev sr0, sector 130816
Buffer I/O error on device sr0, logical block 32704
Buffer I/O error on device sr0, logical block 32705
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fa 00 00 02 00
end_request: I/O error, dev sr0, sector 131048
Buffer I/O error on device sr0, logical block 32762
Buffer I/O error on device sr0, logical block 32763
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fa 00 00 02 00
end_request: I/O error, dev sr0, sector 131048
Buffer I/O error on device sr0, logical block 32762
Buffer I/O error on device sr0, logical block 32763
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
Buffer I/O error on device sr0, logical block 32766
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
Buffer I/O error on device sr0, logical block 32766
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f ee 00 00 02 00
end_request: I/O error, dev sr0, sector 131000
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fc 00 00 02 00
end_request: I/O error, dev sr0, sector 131056
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fc 00 00 02 00
end_request: I/O error, dev sr0, sector 131056
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f c0 00 00 02 00
end_request: I/O error, dev sr0, sector 130816
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f c0 00 00 02 00
end_request: I/O error, dev sr0, sector 130816
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fa 00 00 02 00
end_request: I/O error, dev sr0, sector 131048
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fa 00 00 02 00
end_request: I/O error, dev sr0, sector 131048
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f ee 00 00 02 00
end_request: I/O error, dev sr0, sector 131000
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fc 00 00 02 00
end_request: I/O error, dev sr0, sector 131056
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fc 00 00 02 00
end_request: I/O error, dev sr0, sector 131056
usb 1-5: USB disconnect, device number 7
general protection fault: 0000 [#1] SMP
CPU 1
Modules linked in:
Pid: 1978, comm: umount Not tainted 3.0.0-rc2 #41 LENOVO 20077KG/20077KG
RIP: 0010:[<ffffffff81244590>] [<ffffffff81244590>] elv_may_queue+0x10/0x20
RSP: 0018:ffff88007be17aa8 EFLAGS: 00010097
RAX: 6b6b6b6b6b6b6b6b RBX: ffff88007bc628c0 RCX: 0000000000000010
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88007bc628c0
RBP: ffff88007be17aa8 R08: 0000000000000000 R09: ffff88007bc6f340
R10: ffff88007be17d08 R11: ffff88007be061c8 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: ffff88007bc6f340
FS: 00007f5f4ba89740(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5f4b12a355 CR3: 000000007be2f000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process umount (pid: 1978, threadinfo ffff88007be16000, task ffff88007cceb7b0)
Stack:
ffff88007be17b08 ffffffff8124b3ce ffff88007d19f5f8 ffff88007bd90188
ffff880000000010 ffffffff810f52a6 ffff88007be17b08 ffff88007bc628c0
0000000000000000 0000000000000010 ffff88007be17d08 ffff88007bc6f340
Call Trace:
[<ffffffff8124b3ce>] get_request+0x3e/0x380
[<ffffffff810f52a6>] ? kfree_debugcheck+0x16/0x40
[<ffffffff8124b739>] get_request_wait+0x29/0x190
[<ffffffff8124bc0d>] blk_get_request+0x6d/0x80
[<ffffffff8149a258>] scsi_execute+0x48/0x160
[<ffffffff8149a491>] ? scsi_execute_req+0x61/0x110
[<ffffffff8149a4d7>] scsi_execute_req+0xa7/0x110
[<ffffffff81493e0d>] T.752+0x4d/0x110
[<ffffffff810f5d68>] ? cache_free_debugcheck+0x198/0x250
[<ffffffff81493f36>] scsi_set_medium_removal+0x66/0x90
[<ffffffff81135c6a>] ? fsnotify_clear_marks_by_inode+0x2a/0xf0
[<ffffffff814d4670>] sr_lock_door+0x20/0x30
[<ffffffff816d05a7>] cdrom_release+0x137/0x250
[<ffffffff810f5d68>] ? cache_free_debugcheck+0x198/0x250
[<ffffffff811de45c>] ? isofs_destroy_inode+0x1c/0x20
[<ffffffff814d3a08>] sr_block_release+0x38/0x60
[<ffffffff81130cac>] __blkdev_put+0x16c/0x1b0
[<ffffffff81130d21>] blkdev_put+0x31/0x130
[<ffffffff810ffc3d>] kill_block_super+0x4d/0x80
[<ffffffff811003d5>] deactivate_locked_super+0x45/0x60
[<ffffffff8110100a>] deactivate_super+0x4a/0x70
[<ffffffff8111a98a>] mntput_no_expire+0x12a/0x1a0
[<ffffffff8111afb8>] sys_umount+0x78/0x3b0
[<ffffffff819cd3ab>] system_call_fastpath+0x16/0x1b
Code: 66 66 66 90 48 8b 47 18 48 8b 00 48 8b 40 68 48 85 c0 74 05 48 89 f7 ff d0 c9 c3 55 48 89 e5 66 66 66 66 90 48 8b 47 18 48 8b 00
8b 50 70 31 c0 48 85 d2 74 02 ff d2 c9 c3 90 55 48 89 e5 66
RIP [<ffffffff81244590>] elv_may_queue+0x10/0x20
RSP <ffff88007be17aa8>
---[ end trace a59ceb38f50c5e0c ]---
kworker/u:0 used greatest stack depth: 3952 bytes left
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS]
@ 2011-06-08 6:50 ` Torsten Hilbrich
0 siblings, 0 replies; 47+ messages in thread
From: Torsten Hilbrich @ 2011-06-08 6:50 UTC (permalink / raw)
To: James Bottomley
Cc: Jens Axboe, Parag Warudkar, Linus Torvalds, linux-kernel, akpm,
Linux SCSI List
[-- Attachment #1: Type: text/plain, Size: 4506 bytes --]
Am 27.05.2011 22:21, schrieb James Bottomley:
> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
> index 58584dc..44e8ca3 100644
> --- a/drivers/scsi/scsi_scan.c
> +++ b/drivers/scsi/scsi_scan.c
> @@ -297,7 +297,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
> kfree(sdev);
> goto out;
> }
> -
> + blk_get_queue(sdev->request_queue);
> sdev->request_queue->queuedata = sdev;
> scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
>
> diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
> index e639125..e0bd3f7 100644
> --- a/drivers/scsi/scsi_sysfs.c
> +++ b/drivers/scsi/scsi_sysfs.c
> @@ -322,6 +322,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)
> kfree(evt);
> }
>
> + blk_put_queue(sdev->request_queue);
> /* NULL queue means the device can't be used */
> sdev->request_queue = NULL;
I did some testing with this patch (using 3.0rc2 for reproducing it upstream, but the same behaviour
with 2.6.39 and e73e079bf128d68284efedeba1fbbc18d78610f9 applied).
ext2 and ext3 FS on the USB sticks are working fine, however I get the following oops when performing
the same test with the CDROM part of a sandisk cruzer:
general protection fault: 0000 [#1] SMP
CPU 1
Modules linked in:
Pid: 1978, comm: umount Not tainted 3.0.0-rc2 #41 LENOVO 20077KG/20077KG
RIP: 0010:[<ffffffff81244590>] [<ffffffff81244590>] elv_may_queue+0x10/0x20
RSP: 0018:ffff88007be17aa8 EFLAGS: 00010097
RAX: 6b6b6b6b6b6b6b6b RBX: ffff88007bc628c0 RCX: 0000000000000010
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88007bc628c0
RBP: ffff88007be17aa8 R08: 0000000000000000 R09: ffff88007bc6f340
R10: ffff88007be17d08 R11: ffff88007be061c8 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: ffff88007bc6f340
FS: 00007f5f4ba89740(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5f4b12a355 CR3: 000000007be2f000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process umount (pid: 1978, threadinfo ffff88007be16000, task ffff88007cceb7b0)
Stack:
ffff88007be17b08 ffffffff8124b3ce ffff88007d19f5f8 ffff88007bd90188
ffff880000000010 ffffffff810f52a6 ffff88007be17b08 ffff88007bc628c0
0000000000000000 0000000000000010 ffff88007be17d08 ffff88007bc6f340
Call Trace:
[<ffffffff8124b3ce>] get_request+0x3e/0x380
[<ffffffff810f52a6>] ? kfree_debugcheck+0x16/0x40
[<ffffffff8124b739>] get_request_wait+0x29/0x190
[<ffffffff8124bc0d>] blk_get_request+0x6d/0x80
[<ffffffff8149a258>] scsi_execute+0x48/0x160
[<ffffffff8149a491>] ? scsi_execute_req+0x61/0x110
[<ffffffff8149a4d7>] scsi_execute_req+0xa7/0x110
[<ffffffff81493e0d>] T.752+0x4d/0x110
[<ffffffff810f5d68>] ? cache_free_debugcheck+0x198/0x250
[<ffffffff81493f36>] scsi_set_medium_removal+0x66/0x90
[<ffffffff81135c6a>] ? fsnotify_clear_marks_by_inode+0x2a/0xf0
[<ffffffff814d4670>] sr_lock_door+0x20/0x30
[<ffffffff816d05a7>] cdrom_release+0x137/0x250
[<ffffffff810f5d68>] ? cache_free_debugcheck+0x198/0x250
[<ffffffff811de45c>] ? isofs_destroy_inode+0x1c/0x20
[<ffffffff814d3a08>] sr_block_release+0x38/0x60
[<ffffffff81130cac>] __blkdev_put+0x16c/0x1b0
[<ffffffff81130d21>] blkdev_put+0x31/0x130
[<ffffffff810ffc3d>] kill_block_super+0x4d/0x80
[<ffffffff811003d5>] deactivate_locked_super+0x45/0x60
[<ffffffff8110100a>] deactivate_super+0x4a/0x70
[<ffffffff8111a98a>] mntput_no_expire+0x12a/0x1a0
[<ffffffff8111afb8>] sys_umount+0x78/0x3b0
[<ffffffff819cd3ab>] system_call_fastpath+0x16/0x1b
Code: 66 66 66 90 48 8b 47 18 48 8b 00 48 8b 40 68 48 85 c0 74 05 48 89 f7 ff d0 c9 c3 55 48 89 e5 66 66 66 66 90 48 8b 47 18 48 8b 00
8b 50 70 31 c0 48 85 d2 74 02 ff d2 c9 c3 90 55 48 89 e5 66
RIP [<ffffffff81244590>] elv_may_queue+0x10/0x20
RSP <ffff88007be17aa8>
---[ end trace a59ceb38f50c5e0c ]---
Steps to reproduce:
1. mount /dev/sr0 /mnt # Mount fails
2. umount /mnt # Message about not being mounted
3. mount /dev/sr0 /mnt # [sr0] messages appears in kernel log
4. remove USB stick # USB disconnect message
5. umount /mnt # above error message
I mount the /dev/sr0 in /mnt and remove it before calling umount. I had to repeat the mount as it seemed to fail the first time (calling umount /mnt in-between). The second mount succeeded with some errors reported by the sr0.
Full logs attached as text file.
Torsten
[-- Attachment #2: screenlog.0 --]
[-- Type: text/plain, Size: 51967 bytes --]
Linux version 3.0.0-rc2 (thilbrich@sn-be111) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41 SMP Tue Jun 7 13:06:34 CEST 2011
Command line: BOOT_IMAGE=/bzImage-ipsec-test root=/dev/sda1 ro single init=/bin/bash console=ttyS0,115200 console=tty0 loglevel=7
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI data)
BIOS-e820: 000000007fedf000 - 000000007ff00000 (ACPI NVS)
BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
No AGP bridge found
last_pfn = 0x7fed0 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f6810] f6810
init_memory_mapping: 0000000000000000-000000007fed0000
ACPI: RSDP 00000000000f67e0 00024 (v02 LENOVO)
ACPI: XSDT 000000007fed13c7 0008C (v01 LENOVO TP-79 00002180 LTP 00000000)
ACPI: FACP 000000007fed1500 000F4 (v03 LENOVO TP-79 00002180 LNVO 00000001)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110413/tbfadt-529)
ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110413/tbfadt-560)
ACPI: DSDT 000000007fed185e 0D3C2 (v01 LENOVO TP-79 00002180 MSFT 0100000E)
ACPI: FACS 000000007fef4000 00040
ACPI: SSDT 000000007fed16b4 001AA (v01 LENOVO TP-79 00002180 MSFT 0100000E)
ACPI: ECDT 000000007fedec20 00052 (v01 LENOVO TP-79 00002180 LNVO 00000001)
ACPI: TCPA 000000007fedec72 00032 (v02 LENOVO TP-79 00002180 LNVO 00000001)
ACPI: APIC 000000007fedeca4 00068 (v01 LENOVO TP-79 00002180 LNVO 00000001)
ACPI: MCFG 000000007feded0c 0003C (v01 LENOVO TP-79 00002180 LNVO 00000001)
ACPI: HPET 000000007feded48 00038 (v01 LENOVO TP-79 00002180 LNVO 00000001)
ACPI: SLIC 000000007fedee62 00176 (v01 LENOVO TP-79 00002180 LTP 00000000)
ACPI: BOOT 000000007fedefd8 00028 (v01 LENOVO TP-79 00002180 LTP 00000001)
ACPI: SSDT 000000007fef2697 0025F (v01 LENOVO TP-79 00002180 INTL 20050513)
ACPI: SSDT 000000007fef28f6 000A6 (v01 LENOVO TP-79 00002180 INTL 20050513)
ACPI: SSDT 000000007fef299c 004F7 (v01 LENOVO TP-79 00002180 INTL 20050513)
ACPI: SSDT 000000007fef2e93 001D8 (v01 LENOVO TP-79 00002180 INTL 20050513)
No NUMA configuration found
Faking a node at 0000000000000000-000000007fed0000
Initmem setup node 0 0000000000000000-000000007fed0000
NODE_DATA [000000007fec7000 - 000000007fecbfff]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fed0
ACPI: PM-Timer IO Port: 0x1008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88007fc00000 s70336 r8192 d23872 u1048576
Built 1 zonelists in Node order, mobility grouping on. Total pages: 516702
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/bzImage-ipsec-test root=/dev/sda1 ro single init=/bin/bash console=ttyS0,115200 console=tty0 loglevel=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 2045612k/2095936k available (10053k kernel code, 452k absent, 49872k reserved, 7108k data, 920k init)
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:512 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Fast TSC calibration using PIT
Detected 2161.314 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.62 BogoMIPS (lpj=2161314)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using mwait in idle threads.
ACPI: Core revision 20110413
ftrace: allocating 33379 entries in 131 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Booting Node 0, Processors #1 Ok.
TSC synchronization [CPU#0 -> CPU#1]:
Measured 669123 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (8644.94 BogoMIPS).
kworker/u:0 used greatest stack depth: 6048 bytes left
PM: Registering ACPI NVS region at 7fedf000 (135168 bytes)
NET: Registered protocol family 16
kworker/u:0 used greatest stack depth: 5664 bytes left
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: SSDT 000000007fef1d36 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 000000007fef203d 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 000000007fef1c6e 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 000000007fef1fb8 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PUBS] (on)
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 3 docks/bays found
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
cfg80211: Calling CRDA to update world regulatory domain
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: [io 0x1000-0x107f] has been reserved
system 00:02: [io 0x1180-0x11bf] has been reserved
system 00:02: [io 0x0800-0x080f] has been reserved
system 00:02: [io 0x15e0-0x15ef] has been reserved
system 00:02: [io 0x1600-0x165f] could not be reserved
system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xee120000-0xee13ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x4000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2: bridge window [io 0x6000-0x7fff]
pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
pci 0000:15:00.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref]
pci 0000:15:00.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
pci 0000:15:00.0: BAR 13: assigned [io 0xa000-0xa0ff]
pci 0000:15:00.0: BAR 14: assigned [io 0xa400-0xa4ff]
pci 0000:15:00.0: CardBus bridge to [bus 16-17]
pci 0000:15:00.0: bridge window [io 0xa000-0xa0ff]
pci 0000:15:00.0: bridge window [io 0xa400-0xa4ff]
pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref]
pci 0000:15:00.0: bridge window [mem 0x84000000-0x87ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 15-18]
pci 0000:00:1e.0: bridge window [io 0xa000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1e.0: enabling device (0005 -> 0007)
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Simple Boot Flag at 0x35 set to 0x1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 3995
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
acpi device:06: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input3
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (63 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (63 C)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Initializing Nozomi driver 2.1d
lp: driver loaded but no devices found
Non-volatile memory driver v1.3
intel_rng: FWH not detected
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: power state changed by ACPI to D0
radeon 0000:01:00.0: power state changed by ACPI to D0
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] initializing kernel modesetting (RV530 0x1002:0x71D4).
[drm] register mmio base: 0xEE100000
[drm] register mmio size: 65536
ATOM BIOS: Lenovo
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 1022806 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 1 quad pipes, 2 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x00040000).
radeon 0000:01:00.0: WB enabled
[drm] Loading R500 Microcode
[drm] radeon: ring at 0x0000000010001000
[drm] ring test succeeded in 10 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] LVDS
[drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm] Encoders:
[drm] LCD1: INTERNAL_LVTM1
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_KLDSCP_TMDS1
[drm] radeon: power management initialized
[drm] fb mappable at 0xD00C0000
[drm] vram apper at 0xD0000000
[drm] size 5914624
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 175x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
drm/i810 does not support SMP
[drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
parport_pc 00:0b: activated
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
HP CISS Driver (v 3.6.26)
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
pci 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1880-0x1887
hda: HL-DT-ST DVDRAM GSA-4083N, ATAPI CD/DVD-ROM drive
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
cdrom: Uniform CD-ROM driver Revision: 3.20
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 46
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:02:00.0: Disabling ASPM L0s L1
e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1a:6b:6d:52:3a
e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
sky2: driver version 1.28
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
hso: drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
cdc_ncm: 01-June-2011
usbcore: registered new interface driver cdc_ncm
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
libipw: 802.11 data/management/control stack, git-1.1.13
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
airo(): Probing for PCI adapters
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
airo(): Finished probing for PCI adapters
Loaded prism54 driver, version 1.2
ata1.00: ATA-7: HITACHI HTS541612J9SA00 3H, SB3IC7UP, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usbcore: registered new interface driver zd1211rw
usbcore: registered new interface driver rtl8187
usbcore: registered new interface driver zd1201
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2011 Intel Corporation
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
iwl3945: Copyright(c) 2003-2011 Intel Corporation
iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
usbcore: registered new interface driver rt73usb
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54161 SB3I PQ: 0 ANSI: 5
console [netcon0] enabled
netconsole: network logging started
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0c78, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000007
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0xa000-0xdfff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.0.0-rc2 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.0.0-rc2 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.0.0-rc2 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.0.0-rc2 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.0.0-rc2 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usb 1-6: new high speed USB device number 3 using ehci_hcd
usb 1-6: New USB device found, idVendor=04b3, idProduct=4485
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 2-2: new full speed USB device number 2 using uhci_hcd
usb 2-2: New USB device found, idVendor=0d46, idProduct=3003
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: KAAN SIM III
usb 2-2: Manufacturer: KOBIL
usb 2-2: SerialNumber: K_000000000
usb 5-1: new full speed USB device number 2 using uhci_hcd
usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: BCM2045B
usb 5-1: Manufacturer: Broadcom Corp
usb 5-2: new full speed USB device number 3 using uhci_hcd
usb 5-2: New USB device found, idVendor=0483, idProduct=2016
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Biometric Coprocessor
usb 5-2: Manufacturer: STMicroelectronics
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for Keyspan - (without firmware)
USB Serial support registered for Keyspan 1 port adapter
USB Serial support registered for Keyspan 2 port adapter
USB Serial support registered for Keyspan 4 port adapter
usbcore: registered new interface driver keyspan
keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for Qualcomm USB modem
usbcore: registered new interface driver qcserial
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
md: linear personality registered for level -1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
dell_wmi: No known WMI GUID found
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 79ETD8WW (2.18 ), EC 79HT50WW-1.07
thinkpad_acpi: Lenovo ThinkPad T60p, model 20077KG
thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
hdaps: inverting axis (3) readings
hdaps: LENOVO ThinkPad T60 detected
input: hdaps as /devices/platform/hdaps/input/input6
hdaps: driver successfully loaded
fujitsu_laptop: driver 0.6.0 successfully loaded
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:2010
ALSA device list:
#0: Dummy 1
#1: HDA Intel at 0xee400000 irq 49
#29: ThinkPad Console Audio Control at EC reg 0x30, fw 79HT50WW-1.07
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
registered taskstats version 1
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 164k freed
Freeing unused kernel memory: 1404k freed
groups used greatest stack depth: 4656 bytes left
bash used greatest stack depth: 4488 bytes left
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
mount used greatest stack depth: 4232 bytes left
usb 1-5: new high speed USB device number 6 using ehci_hcd
usb 1-5: New USB device found, idVendor=0781, idProduct=5406
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: U3 Cruzer Micro
usb 1-5: Manufacturer: SanDisk
usb 1-5: SerialNumber: 0774231405811B9E
scsi4 : usb-storage 1-5:1.0
scsi 4:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sdb] 3907583 512-byte logical blocks: (2.00 GB/1.86 GiB)
scsi 4:0:0:1: CD-ROM SanDisk Cruzer 7.01 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sr0: scsi3-mmc drive: 48x/48x tray
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb3
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
usb 1-5: USB disconnect, device number 6
usb 1-5: new high speed USB device number 7 using ehci_hcd
usb 1-5: New USB device found, idVendor=0781, idProduct=5406
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: U3 Cruzer Micro
usb 1-5: Manufacturer: SanDisk
usb 1-5: SerialNumber: 0774231405811B9E
scsi5 : usb-storage 1-5:1.0
scsi 5:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: [sdb] 3907583 512-byte logical blocks: (2.00 GB/1.86 GiB)
scsi 5:0:0:1: CD-ROM SanDisk Cruzer 7.01 PQ: 0 ANSI: 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] No Caching mode page present
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sr0: scsi3-mmc drive: 48x/48x tray
sd 5:0:0:0: [sdb] No Caching mode page present
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb3
sd 5:0:0:0: [sdb] No Caching mode page present
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f c0 00 00 02 00
end_request: I/O error, dev sr0, sector 130816
Buffer I/O error on device sr0, logical block 32704
Buffer I/O error on device sr0, logical block 32705
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f c0 00 00 02 00
end_request: I/O error, dev sr0, sector 130816
Buffer I/O error on device sr0, logical block 32704
Buffer I/O error on device sr0, logical block 32705
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fa 00 00 02 00
end_request: I/O error, dev sr0, sector 131048
Buffer I/O error on device sr0, logical block 32762
Buffer I/O error on device sr0, logical block 32763
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fa 00 00 02 00
end_request: I/O error, dev sr0, sector 131048
Buffer I/O error on device sr0, logical block 32762
Buffer I/O error on device sr0, logical block 32763
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
Buffer I/O error on device sr0, logical block 32766
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
Buffer I/O error on device sr0, logical block 32766
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f ee 00 00 02 00
end_request: I/O error, dev sr0, sector 131000
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fc 00 00 02 00
end_request: I/O error, dev sr0, sector 131056
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fc 00 00 02 00
end_request: I/O error, dev sr0, sector 131056
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f c0 00 00 02 00
end_request: I/O error, dev sr0, sector 130816
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f c0 00 00 02 00
end_request: I/O error, dev sr0, sector 130816
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fa 00 00 02 00
end_request: I/O error, dev sr0, sector 131048
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fa 00 00 02 00
end_request: I/O error, dev sr0, sector 131048
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f ee 00 00 02 00
end_request: I/O error, dev sr0, sector 131000
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fc 00 00 02 00
end_request: I/O error, dev sr0, sector 131056
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fe 00 00 01 00
end_request: I/O error, dev sr0, sector 131064
sr 5:0:0:1: [sr0] Unhandled sense code
sr 5:0:0:1: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr0] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
sr 5:0:0:1: [sr0] CDB: Read(10): 28 00 00 00 7f fc 00 00 02 00
end_request: I/O error, dev sr0, sector 131056
usb 1-5: USB disconnect, device number 7
general protection fault: 0000 [#1] SMP
CPU 1
Modules linked in:
Pid: 1978, comm: umount Not tainted 3.0.0-rc2 #41 LENOVO 20077KG/20077KG
RIP: 0010:[<ffffffff81244590>] [<ffffffff81244590>] elv_may_queue+0x10/0x20
RSP: 0018:ffff88007be17aa8 EFLAGS: 00010097
RAX: 6b6b6b6b6b6b6b6b RBX: ffff88007bc628c0 RCX: 0000000000000010
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88007bc628c0
RBP: ffff88007be17aa8 R08: 0000000000000000 R09: ffff88007bc6f340
R10: ffff88007be17d08 R11: ffff88007be061c8 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: ffff88007bc6f340
FS: 00007f5f4ba89740(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5f4b12a355 CR3: 000000007be2f000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process umount (pid: 1978, threadinfo ffff88007be16000, task ffff88007cceb7b0)
Stack:
ffff88007be17b08 ffffffff8124b3ce ffff88007d19f5f8 ffff88007bd90188
ffff880000000010 ffffffff810f52a6 ffff88007be17b08 ffff88007bc628c0
0000000000000000 0000000000000010 ffff88007be17d08 ffff88007bc6f340
Call Trace:
[<ffffffff8124b3ce>] get_request+0x3e/0x380
[<ffffffff810f52a6>] ? kfree_debugcheck+0x16/0x40
[<ffffffff8124b739>] get_request_wait+0x29/0x190
[<ffffffff8124bc0d>] blk_get_request+0x6d/0x80
[<ffffffff8149a258>] scsi_execute+0x48/0x160
[<ffffffff8149a491>] ? scsi_execute_req+0x61/0x110
[<ffffffff8149a4d7>] scsi_execute_req+0xa7/0x110
[<ffffffff81493e0d>] T.752+0x4d/0x110
[<ffffffff810f5d68>] ? cache_free_debugcheck+0x198/0x250
[<ffffffff81493f36>] scsi_set_medium_removal+0x66/0x90
[<ffffffff81135c6a>] ? fsnotify_clear_marks_by_inode+0x2a/0xf0
[<ffffffff814d4670>] sr_lock_door+0x20/0x30
[<ffffffff816d05a7>] cdrom_release+0x137/0x250
[<ffffffff810f5d68>] ? cache_free_debugcheck+0x198/0x250
[<ffffffff811de45c>] ? isofs_destroy_inode+0x1c/0x20
[<ffffffff814d3a08>] sr_block_release+0x38/0x60
[<ffffffff81130cac>] __blkdev_put+0x16c/0x1b0
[<ffffffff81130d21>] blkdev_put+0x31/0x130
[<ffffffff810ffc3d>] kill_block_super+0x4d/0x80
[<ffffffff811003d5>] deactivate_locked_super+0x45/0x60
[<ffffffff8110100a>] deactivate_super+0x4a/0x70
[<ffffffff8111a98a>] mntput_no_expire+0x12a/0x1a0
[<ffffffff8111afb8>] sys_umount+0x78/0x3b0
[<ffffffff819cd3ab>] system_call_fastpath+0x16/0x1b
Code: 66 66 66 90 48 8b 47 18 48 8b 00 48 8b 40 68 48 85 c0 74 05 48 89 f7 ff d0 c9 c3 55 48 89 e5 66 66 66 66 90 48 8b 47 18 48 8b 00
8b 50 70 31 c0 48 85 d2 74 02 ff d2 c9 c3 90 55 48 89 e5 66
RIP [<ffffffff81244590>] elv_may_queue+0x10/0x20
RSP <ffff88007be17aa8>
---[ end trace a59ceb38f50c5e0c ]---
kworker/u:0 used greatest stack depth: 3952 bytes left
^ permalink raw reply [flat|nested] 47+ messages in thread
end of thread, other threads:[~2011-06-08 6:51 UTC | newest]
Thread overview: 47+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-24 4:29 __elv_add_request OOPS Parag Warudkar
2011-05-24 10:44 ` Jens Axboe
2011-05-24 10:44 ` Jens Axboe
2011-05-25 1:41 ` [PATCH] SCSI IOCTL: Check for device deletion [was Re: __elv_add_request OOPS] Parag Warudkar
2011-05-25 1:41 ` Parag Warudkar
2011-05-25 7:37 ` Jens Axboe
2011-05-25 7:37 ` Jens Axboe
2011-05-25 18:44 ` Parag Warudkar
2011-05-25 18:44 ` Parag Warudkar
2011-05-25 18:55 ` Linus Torvalds
2011-05-25 18:55 ` Linus Torvalds
2011-05-25 19:02 ` Jens Axboe
2011-05-25 19:02 ` Jens Axboe
2011-05-25 19:13 ` Linus Torvalds
2011-05-25 19:13 ` Linus Torvalds
2011-05-25 19:17 ` Jens Axboe
2011-05-25 19:17 ` Jens Axboe
2011-05-25 19:52 ` Parag Warudkar
2011-05-25 19:52 ` Parag Warudkar
2011-05-25 20:03 ` Linus Torvalds
2011-05-25 20:03 ` Linus Torvalds
2011-05-25 20:18 ` Parag Warudkar
2011-05-25 20:18 ` Parag Warudkar
2011-05-25 20:26 ` Linus Torvalds
2011-05-25 20:26 ` Linus Torvalds
2011-05-25 20:42 ` Parag Warudkar
2011-05-25 20:42 ` Parag Warudkar
2011-05-25 20:52 ` James Bottomley
2011-05-25 23:00 ` Parag Warudkar
2011-05-25 23:14 ` Linus Torvalds
2011-05-25 23:45 ` Parag Warudkar
2011-05-25 23:52 ` Linus Torvalds
[not found] ` <1306370123.1641.76.camel@mulgrave.site>
2011-05-26 1:01 ` Linus Torvalds
2011-05-26 1:06 ` James Bottomley
2011-05-26 1:43 ` Parag Warudkar
2011-05-27 3:53 ` James Bottomley
2011-05-27 5:43 ` Jens Axboe
2011-05-27 20:21 ` James Bottomley
2011-05-27 20:21 ` James Bottomley
2011-05-28 12:42 ` Jens Axboe
2011-05-28 12:42 ` Jens Axboe
2011-06-08 6:50 ` Torsten Hilbrich
2011-06-08 6:50 ` Torsten Hilbrich
2011-05-25 20:20 ` James Bottomley
2011-05-25 20:22 ` Parag Warudkar
2011-05-25 20:29 ` James Bottomley
2011-05-25 20:26 ` __elv_add_request OOPS James Bottomley
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.