* [PULL 00/34] target-arm queue
@ 2023-01-05 16:43 Peter Maydell
2023-01-05 16:43 ` [PULL 01/34] target/arm:Set lg_page_size to 0 if either S1 or S2 asks for it Peter Maydell
` (34 more replies)
0 siblings, 35 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
Some arm patches; my to-review queue is by no means empty, but
this is a big enough set of patches to be getting on with...
-- PMM
The following changes since commit cb9c6a8e5ad6a1f0ce164d352e3102df46986e22:
.gitlab-ci.d/windows: Work-around timeout and OpenGL problems of the MSYS2 jobs (2023-01-04 18:58:33 +0000)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230105
for you to fetch changes up to 93c9678de9dc7d2e68f9e8477da072bac30ef132:
hw/net: Fix read of uninitialized memory in imx_fec. (2023-01-05 15:33:00 +0000)
----------------------------------------------------------------
target-arm queue:
* Implement AArch32 ARMv8-R support
* Add Cortex-R52 CPU
* fix handling of HLT semihosting in system mode
* hw/timer/ixm_epit: cleanup and fix bug in compare handling
* target/arm: Coding style fixes
* target/arm: Clean up includes
* nseries: minor code cleanups
* target/arm: align exposed ID registers with Linux
* hw/arm/smmu-common: remove unnecessary inlines
* i.MX7D: Handle GPT timers
* i.MX7D: Connect IRQs to GPIO devices
* i.MX6UL: Add a specific GPT timer instance
* hw/net: Fix read of uninitialized memory in imx_fec
----------------------------------------------------------------
Alex Bennée (1):
target/arm: fix handling of HLT semihosting in system mode
Axel Heider (8):
hw/timer/imx_epit: improve comments
hw/timer/imx_epit: cleanup CR defines
hw/timer/imx_epit: define SR_OCIF
hw/timer/imx_epit: update interrupt state on CR write access
hw/timer/imx_epit: hard reset initializes CR with 0
hw/timer/imx_epit: factor out register write handlers
hw/timer/imx_epit: remove explicit fields cnt and freq
hw/timer/imx_epit: fix compare timer handling
Claudio Fontana (1):
target/arm: cleanup cpu includes
Fabiano Rosas (5):
target/arm: Fix checkpatch comment style warnings in helper.c
target/arm: Fix checkpatch space errors in helper.c
target/arm: Fix checkpatch brace errors in helper.c
target/arm: Remove unused includes from m_helper.c
target/arm: Remove unused includes from helper.c
Jean-Christophe Dubois (4):
i.MX7D: Connect GPT timers to IRQ
i.MX7D: Compute clock frequency for the fixed frequency clocks.
i.MX6UL: Add a specific GPT timer instance for the i.MX6UL
i.MX7D: Connect IRQs to GPIO devices.
Peter Maydell (1):
target/arm:Set lg_page_size to 0 if either S1 or S2 asks for it
Philippe Mathieu-Daudé (5):
hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo arg
hw/arm/nseries: Constify various read-only arrays
hw/arm/nseries: Silent -Wmissing-field-initializers warning
hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scope
hw/arm/smmu-common: Avoid using inlined functions with external linkage
Stephen Longfield (1):
hw/net: Fix read of uninitialized memory in imx_fec.
Tobias Röhmel (7):
target/arm: Don't add all MIDR aliases for cores that implement PMSA
target/arm: Make RVBAR available for all ARMv8 CPUs
target/arm: Make stage_2_format for cache attributes optional
target/arm: Enable TTBCR_EAE for ARMv8-R AArch32
target/arm: Add PMSAv8r registers
target/arm: Add PMSAv8r functionality
target/arm: Add ARM Cortex-R52 CPU
Zhuojia Shen (1):
target/arm: align exposed ID registers with Linux
include/hw/arm/fsl-imx7.h | 20 +
include/hw/arm/smmu-common.h | 3 -
include/hw/input/tsc2xxx.h | 4 +-
include/hw/timer/imx_epit.h | 8 +-
include/hw/timer/imx_gpt.h | 1 +
target/arm/cpu.h | 6 +
target/arm/internals.h | 4 +
hw/arm/fsl-imx6ul.c | 2 +-
hw/arm/fsl-imx7.c | 41 +-
hw/arm/nseries.c | 28 +-
hw/arm/smmu-common.c | 15 +-
hw/input/tsc2005.c | 2 +-
hw/input/tsc210x.c | 3 +-
hw/misc/imx6ul_ccm.c | 6 -
hw/misc/imx7_ccm.c | 49 ++-
hw/net/imx_fec.c | 8 +-
hw/timer/imx_epit.c | 376 +++++++++-------
hw/timer/imx_gpt.c | 25 ++
target/arm/cpu.c | 35 +-
target/arm/cpu64.c | 6 -
target/arm/cpu_tcg.c | 42 ++
target/arm/debug_helper.c | 3 +
target/arm/helper.c | 871 +++++++++++++++++++++++++++++---------
target/arm/m_helper.c | 16 -
target/arm/machine.c | 28 ++
target/arm/ptw.c | 152 +++++--
target/arm/tlb_helper.c | 4 +
target/arm/translate.c | 2 +-
tests/tcg/aarch64/sysregs.c | 24 +-
tests/tcg/aarch64/Makefile.target | 7 +-
30 files changed, 1330 insertions(+), 461 deletions(-)
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PULL 01/34] target/arm:Set lg_page_size to 0 if either S1 or S2 asks for it
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 02/34] target/arm: Don't add all MIDR aliases for cores that implement PMSA Peter Maydell
` (33 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
In get_phys_addr_twostage() we set the lg_page_size of the result to
the maximum of the stage 1 and stage 2 page sizes. This works for
the case where we do want to create a TLB entry, because we know the
common TLB code only creates entries of the TARGET_PAGE_SIZE and
asking for a size larger than that only means that invalidations
invalidate the whole larger area. However, if lg_page_size is
smaller than TARGET_PAGE_SIZE this effectively means "don't create a
TLB entry"; in this case if either S1 or S2 said "this covers less
than a page and can't go in a TLB" then the final result also should
be marked that way. Set the resulting page size to 0 if either
stage asked for a less-than-a-page entry, and expand the comment
to explain what's going on.
This has no effect for VMSA because currently the VMSA lookup always
returns results that cover at least TARGET_PAGE_SIZE; however when we
add v8R support it will reuse this code path, and for v8R the S1 and
S2 results can be smaller than TARGET_PAGE_SIZE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221212142708.610090-1-peter.maydell@linaro.org
---
target/arm/ptw.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/target/arm/ptw.c b/target/arm/ptw.c
index f812734bfb2..2e7826dc29b 100644
--- a/target/arm/ptw.c
+++ b/target/arm/ptw.c
@@ -2655,10 +2655,20 @@ static bool get_phys_addr_twostage(CPUARMState *env, S1Translate *ptw,
}
/*
- * Use the maximum of the S1 & S2 page size, so that invalidation
- * of pages > TARGET_PAGE_SIZE works correctly.
+ * If either S1 or S2 returned a result smaller than TARGET_PAGE_SIZE,
+ * this means "don't put this in the TLB"; in this case, return a
+ * result with lg_page_size == 0 to achieve that. Otherwise,
+ * use the maximum of the S1 & S2 page size, so that invalidation
+ * of pages > TARGET_PAGE_SIZE works correctly. (This works even though
+ * we know the combined result permissions etc only cover the minimum
+ * of the S1 and S2 page size, because we know that the common TLB code
+ * never actually creates TLB entries bigger than TARGET_PAGE_SIZE,
+ * and passing a larger page size value only affects invalidations.)
*/
- if (result->f.lg_page_size < s1_lgpgsz) {
+ if (result->f.lg_page_size < TARGET_PAGE_BITS ||
+ s1_lgpgsz < TARGET_PAGE_BITS) {
+ result->f.lg_page_size = 0;
+ } else if (result->f.lg_page_size < s1_lgpgsz) {
result->f.lg_page_size = s1_lgpgsz;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 02/34] target/arm: Don't add all MIDR aliases for cores that implement PMSA
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
2023-01-05 16:43 ` [PULL 01/34] target/arm:Set lg_page_size to 0 if either S1 or S2 asks for it Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 03/34] target/arm: Make RVBAR available for all ARMv8 CPUs Peter Maydell
` (32 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Cores with PMSA have the MPUIR register which has the
same encoding as the MIDR alias with opc2=4. So we only
add that alias if we are not realizing a core that
implements PMSA.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221206102504.165775-2-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index bac2ea62c44..090daf93c71 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -8153,10 +8153,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
.access = PL1_R, .type = ARM_CP_NO_RAW, .resetvalue = cpu->midr,
.fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid),
.readfn = midr_read },
- /* crn = 0 op1 = 0 crm = 0 op2 = 4,7 : AArch32 aliases of MIDR */
- { .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST,
- .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4,
- .access = PL1_R, .resetvalue = cpu->midr },
+ /* crn = 0 op1 = 0 crm = 0 op2 = 7 : AArch32 aliases of MIDR */
{ .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST,
.cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 7,
.access = PL1_R, .resetvalue = cpu->midr },
@@ -8166,6 +8163,11 @@ void register_cp_regs_for_features(ARMCPU *cpu)
.accessfn = access_aa64_tid1,
.type = ARM_CP_CONST, .resetvalue = cpu->revidr },
};
+ ARMCPRegInfo id_v8_midr_alias_cp_reginfo = {
+ .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST,
+ .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4,
+ .access = PL1_R, .resetvalue = cpu->midr
+ };
ARMCPRegInfo id_cp_reginfo[] = {
/* These are common to v8 and pre-v8 */
{ .name = "CTR",
@@ -8231,6 +8233,9 @@ void register_cp_regs_for_features(ARMCPU *cpu)
}
if (arm_feature(env, ARM_FEATURE_V8)) {
define_arm_cp_regs(cpu, id_v8_midr_cp_reginfo);
+ if (!arm_feature(env, ARM_FEATURE_PMSA)) {
+ define_one_arm_cp_reg(cpu, &id_v8_midr_alias_cp_reginfo);
+ }
} else {
define_arm_cp_regs(cpu, id_pre_v8_midr_cp_reginfo);
}
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 03/34] target/arm: Make RVBAR available for all ARMv8 CPUs
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
2023-01-05 16:43 ` [PULL 01/34] target/arm:Set lg_page_size to 0 if either S1 or S2 asks for it Peter Maydell
2023-01-05 16:43 ` [PULL 02/34] target/arm: Don't add all MIDR aliases for cores that implement PMSA Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 04/34] target/arm: Make stage_2_format for cache attributes optional Peter Maydell
` (31 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
RVBAR shadows RVBAR_ELx where x is the highest exception
level if the highest EL is not EL3. This patch also allows
ARMv8 CPUs to change the reset address with
the rvbar property.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-3-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu.c | 6 +++++-
target/arm/helper.c | 21 ++++++++++++++-------
2 files changed, 19 insertions(+), 8 deletions(-)
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 2fa022f62ba..c107cbd7574 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -309,6 +309,10 @@ static void arm_cpu_reset_hold(Object *obj)
env->cp15.cpacr_el1 = FIELD_DP64(env->cp15.cpacr_el1,
CPACR, CP11, 3);
#endif
+ if (arm_feature(env, ARM_FEATURE_V8)) {
+ env->cp15.rvbar = cpu->rvbar_prop;
+ env->regs[15] = cpu->rvbar_prop;
+ }
}
#if defined(CONFIG_USER_ONLY)
@@ -1345,7 +1349,7 @@ void arm_cpu_post_init(Object *obj)
qdev_property_add_static(DEVICE(obj), &arm_cpu_reset_hivecs_property);
}
- if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
+ if (arm_feature(&cpu->env, ARM_FEATURE_V8)) {
object_property_add_uint64_ptr(obj, "rvbar",
&cpu->rvbar_prop,
OBJ_PROP_FLAG_READWRITE);
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 090daf93c71..d8066fe97d3 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -7896,7 +7896,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
if (!arm_feature(env, ARM_FEATURE_EL3) &&
!arm_feature(env, ARM_FEATURE_EL2)) {
ARMCPRegInfo rvbar = {
- .name = "RVBAR_EL1", .state = ARM_CP_STATE_AA64,
+ .name = "RVBAR_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1,
.access = PL1_R,
.fieldoffset = offsetof(CPUARMState, cp15.rvbar),
@@ -7987,13 +7987,20 @@ void register_cp_regs_for_features(ARMCPU *cpu)
}
/* RVBAR_EL2 is only implemented if EL2 is the highest EL */
if (!arm_feature(env, ARM_FEATURE_EL3)) {
- ARMCPRegInfo rvbar = {
- .name = "RVBAR_EL2", .state = ARM_CP_STATE_AA64,
- .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 1,
- .access = PL2_R,
- .fieldoffset = offsetof(CPUARMState, cp15.rvbar),
+ ARMCPRegInfo rvbar[] = {
+ {
+ .name = "RVBAR_EL2", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 1,
+ .access = PL2_R,
+ .fieldoffset = offsetof(CPUARMState, cp15.rvbar),
+ },
+ { .name = "RVBAR", .type = ARM_CP_ALIAS,
+ .cp = 15, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1,
+ .access = PL2_R,
+ .fieldoffset = offsetof(CPUARMState, cp15.rvbar),
+ },
};
- define_one_arm_cp_reg(cpu, &rvbar);
+ define_arm_cp_regs(cpu, rvbar);
}
}
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 04/34] target/arm: Make stage_2_format for cache attributes optional
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (2 preceding siblings ...)
2023-01-05 16:43 ` [PULL 03/34] target/arm: Make RVBAR available for all ARMv8 CPUs Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 05/34] target/arm: Enable TTBCR_EAE for ARMv8-R AArch32 Peter Maydell
` (30 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
The v8R PMSAv8 has a two-stage MPU translation process, but, unlike
VMSAv8, the stage 2 attributes are in the same format as the stage 1
attributes (8-bit MAIR format). Rather than converting the MAIR
format to the format used for VMSA stage 2 (bits [5:2] of a VMSA
stage 2 descriptor) and then converting back to do the attribute
combination, allow combined_attrs_nofwb() to accept s2 attributes
that are already in the MAIR format.
We move the assert() to combined_attrs_fwb(), because that function
really does require a VMSA stage 2 attribute format. (We will never
get there for v8R, because PMSAv8 does not implement FEAT_S2FWB.)
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-4-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/ptw.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/target/arm/ptw.c b/target/arm/ptw.c
index 2e7826dc29b..1c7c9cb5e37 100644
--- a/target/arm/ptw.c
+++ b/target/arm/ptw.c
@@ -2361,7 +2361,11 @@ static uint8_t combined_attrs_nofwb(uint64_t hcr,
{
uint8_t s1lo, s2lo, s1hi, s2hi, s2_mair_attrs, ret_attrs;
- s2_mair_attrs = convert_stage2_attrs(hcr, s2.attrs);
+ if (s2.is_s2_format) {
+ s2_mair_attrs = convert_stage2_attrs(hcr, s2.attrs);
+ } else {
+ s2_mair_attrs = s2.attrs;
+ }
s1lo = extract32(s1.attrs, 0, 4);
s2lo = extract32(s2_mair_attrs, 0, 4);
@@ -2418,6 +2422,8 @@ static uint8_t force_cacheattr_nibble_wb(uint8_t attr)
*/
static uint8_t combined_attrs_fwb(ARMCacheAttrs s1, ARMCacheAttrs s2)
{
+ assert(s2.is_s2_format && !s1.is_s2_format);
+
switch (s2.attrs) {
case 7:
/* Use stage 1 attributes */
@@ -2467,7 +2473,7 @@ static ARMCacheAttrs combine_cacheattrs(uint64_t hcr,
ARMCacheAttrs ret;
bool tagged = false;
- assert(s2.is_s2_format && !s1.is_s2_format);
+ assert(!s1.is_s2_format);
ret.is_s2_format = false;
if (s1.attrs == 0xf0) {
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 05/34] target/arm: Enable TTBCR_EAE for ARMv8-R AArch32
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (3 preceding siblings ...)
2023-01-05 16:43 ` [PULL 04/34] target/arm: Make stage_2_format for cache attributes optional Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 06/34] target/arm: Add PMSAv8r registers Peter Maydell
` (29 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
ARMv8-R AArch32 CPUs behave as if TTBCR.EAE is always 1 even
tough they don't have the TTBCR register.
See ARM Architecture Reference Manual Supplement - ARMv8, for the ARMv8-R
AArch32 architecture profile Version:A.c section C1.2.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-5-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/internals.h | 4 ++++
target/arm/debug_helper.c | 3 +++
target/arm/tlb_helper.c | 4 ++++
3 files changed, 11 insertions(+)
diff --git a/target/arm/internals.h b/target/arm/internals.h
index 161e42d50f4..d9555309df0 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -257,6 +257,10 @@ unsigned int arm_pamax(ARMCPU *cpu);
static inline bool extended_addresses_enabled(CPUARMState *env)
{
uint64_t tcr = env->cp15.tcr_el[arm_is_secure(env) ? 3 : 1];
+ if (arm_feature(env, ARM_FEATURE_PMSA) &&
+ arm_feature(env, ARM_FEATURE_V8)) {
+ return true;
+ }
return arm_el_is_aa64(env, 1) ||
(arm_feature(env, ARM_FEATURE_LPAE) && (tcr & TTBCR_EAE));
}
diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c
index c21739242c5..2f6ddc0da57 100644
--- a/target/arm/debug_helper.c
+++ b/target/arm/debug_helper.c
@@ -437,6 +437,9 @@ static uint32_t arm_debug_exception_fsr(CPUARMState *env)
if (target_el == 2 || arm_el_is_aa64(env, target_el)) {
using_lpae = true;
+ } else if (arm_feature(env, ARM_FEATURE_PMSA) &&
+ arm_feature(env, ARM_FEATURE_V8)) {
+ using_lpae = true;
} else {
if (arm_feature(env, ARM_FEATURE_LPAE) &&
(env->cp15.tcr_el[target_el] & TTBCR_EAE)) {
diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c
index 0f4f4fc8094..60abcbebe64 100644
--- a/target/arm/tlb_helper.c
+++ b/target/arm/tlb_helper.c
@@ -19,6 +19,10 @@ bool regime_using_lpae_format(CPUARMState *env, ARMMMUIdx mmu_idx)
if (el == 2 || arm_el_is_aa64(env, el)) {
return true;
}
+ if (arm_feature(env, ARM_FEATURE_PMSA) &&
+ arm_feature(env, ARM_FEATURE_V8)) {
+ return true;
+ }
if (arm_feature(env, ARM_FEATURE_LPAE)
&& (regime_tcr(env, mmu_idx) & TTBCR_EAE)) {
return true;
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 06/34] target/arm: Add PMSAv8r registers
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (4 preceding siblings ...)
2023-01-05 16:43 ` [PULL 05/34] target/arm: Enable TTBCR_EAE for ARMv8-R AArch32 Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 07/34] target/arm: Add PMSAv8r functionality Peter Maydell
` (28 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Message-id: 20221206102504.165775-6-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu.h | 6 +
target/arm/cpu.c | 28 +++-
target/arm/helper.c | 302 +++++++++++++++++++++++++++++++++++++++++++
target/arm/machine.c | 28 ++++
4 files changed, 360 insertions(+), 4 deletions(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 2b4bd20f9d0..bf2bce046d5 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -309,6 +309,7 @@ typedef struct CPUArchState {
};
uint64_t sctlr_el[4];
};
+ uint64_t vsctlr; /* Virtualization System control register. */
uint64_t cpacr_el1; /* Architectural feature access control register */
uint64_t cptr_el[4]; /* ARMv8 feature trap registers */
uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */
@@ -745,8 +746,11 @@ typedef struct CPUArchState {
*/
uint32_t *rbar[M_REG_NUM_BANKS];
uint32_t *rlar[M_REG_NUM_BANKS];
+ uint32_t *hprbar;
+ uint32_t *hprlar;
uint32_t mair0[M_REG_NUM_BANKS];
uint32_t mair1[M_REG_NUM_BANKS];
+ uint32_t hprselr;
} pmsav8;
/* v8M SAU */
@@ -906,6 +910,8 @@ struct ArchCPU {
bool has_mpu;
/* PMSAv7 MPU number of supported regions */
uint32_t pmsav7_dregion;
+ /* PMSAv8 MPU number of supported hyp regions */
+ uint32_t pmsav8r_hdregion;
/* v8M SAU number of supported regions */
uint32_t sau_sregion;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index c107cbd7574..f99f749b295 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -491,6 +491,14 @@ static void arm_cpu_reset_hold(Object *obj)
sizeof(*env->pmsav7.dracr) * cpu->pmsav7_dregion);
}
}
+
+ if (cpu->pmsav8r_hdregion > 0) {
+ memset(env->pmsav8.hprbar, 0,
+ sizeof(*env->pmsav8.hprbar) * cpu->pmsav8r_hdregion);
+ memset(env->pmsav8.hprlar, 0,
+ sizeof(*env->pmsav8.hprlar) * cpu->pmsav8r_hdregion);
+ }
+
env->pmsav7.rnr[M_REG_NS] = 0;
env->pmsav7.rnr[M_REG_S] = 0;
env->pmsav8.mair0[M_REG_NS] = 0;
@@ -2002,11 +2010,10 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
/* MPU can be configured out of a PMSA CPU either by setting has-mpu
* to false or by setting pmsav7-dregion to 0.
*/
- if (!cpu->has_mpu) {
- cpu->pmsav7_dregion = 0;
- }
- if (cpu->pmsav7_dregion == 0) {
+ if (!cpu->has_mpu || cpu->pmsav7_dregion == 0) {
cpu->has_mpu = false;
+ cpu->pmsav7_dregion = 0;
+ cpu->pmsav8r_hdregion = 0;
}
if (arm_feature(env, ARM_FEATURE_PMSA) &&
@@ -2033,6 +2040,19 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
env->pmsav7.dracr = g_new0(uint32_t, nr);
}
}
+
+ if (cpu->pmsav8r_hdregion > 0xff) {
+ error_setg(errp, "PMSAv8 MPU EL2 #regions invalid %" PRIu32,
+ cpu->pmsav8r_hdregion);
+ return;
+ }
+
+ if (cpu->pmsav8r_hdregion) {
+ env->pmsav8.hprbar = g_new0(uint32_t,
+ cpu->pmsav8r_hdregion);
+ env->pmsav8.hprlar = g_new0(uint32_t,
+ cpu->pmsav8r_hdregion);
+ }
}
if (arm_feature(env, ARM_FEATURE_M_SECURITY)) {
diff --git a/target/arm/helper.c b/target/arm/helper.c
index d8066fe97d3..b13f6ff328c 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -3682,6 +3682,222 @@ static void pmsav7_rgnr_write(CPUARMState *env, const ARMCPRegInfo *ri,
raw_write(env, ri, value);
}
+static void prbar_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ ARMCPU *cpu = env_archcpu(env);
+
+ tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */
+ env->pmsav8.rbar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]] = value;
+}
+
+static uint64_t prbar_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ return env->pmsav8.rbar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]];
+}
+
+static void prlar_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ ARMCPU *cpu = env_archcpu(env);
+
+ tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */
+ env->pmsav8.rlar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]] = value;
+}
+
+static uint64_t prlar_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ return env->pmsav8.rlar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]];
+}
+
+static void prselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ ARMCPU *cpu = env_archcpu(env);
+
+ /*
+ * Ignore writes that would select not implemented region.
+ * This is architecturally UNPREDICTABLE.
+ */
+ if (value >= cpu->pmsav7_dregion) {
+ return;
+ }
+
+ env->pmsav7.rnr[M_REG_NS] = value;
+}
+
+static void hprbar_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ ARMCPU *cpu = env_archcpu(env);
+
+ tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */
+ env->pmsav8.hprbar[env->pmsav8.hprselr] = value;
+}
+
+static uint64_t hprbar_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ return env->pmsav8.hprbar[env->pmsav8.hprselr];
+}
+
+static void hprlar_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ ARMCPU *cpu = env_archcpu(env);
+
+ tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */
+ env->pmsav8.hprlar[env->pmsav8.hprselr] = value;
+}
+
+static uint64_t hprlar_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ return env->pmsav8.hprlar[env->pmsav8.hprselr];
+}
+
+static void hprenr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ uint32_t n;
+ uint32_t bit;
+ ARMCPU *cpu = env_archcpu(env);
+
+ /* Ignore writes to unimplemented regions */
+ int rmax = MIN(cpu->pmsav8r_hdregion, 32);
+ value &= MAKE_64BIT_MASK(0, rmax);
+
+ tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */
+
+ /* Register alias is only valid for first 32 indexes */
+ for (n = 0; n < rmax; ++n) {
+ bit = extract32(value, n, 1);
+ env->pmsav8.hprlar[n] = deposit32(
+ env->pmsav8.hprlar[n], 0, 1, bit);
+ }
+}
+
+static uint64_t hprenr_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ uint32_t n;
+ uint32_t result = 0x0;
+ ARMCPU *cpu = env_archcpu(env);
+
+ /* Register alias is only valid for first 32 indexes */
+ for (n = 0; n < MIN(cpu->pmsav8r_hdregion, 32); ++n) {
+ if (env->pmsav8.hprlar[n] & 0x1) {
+ result |= (0x1 << n);
+ }
+ }
+ return result;
+}
+
+static void hprselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ ARMCPU *cpu = env_archcpu(env);
+
+ /*
+ * Ignore writes that would select not implemented region.
+ * This is architecturally UNPREDICTABLE.
+ */
+ if (value >= cpu->pmsav8r_hdregion) {
+ return;
+ }
+
+ env->pmsav8.hprselr = value;
+}
+
+static void pmsav8r_regn_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ ARMCPU *cpu = env_archcpu(env);
+ uint8_t index = (extract32(ri->opc0, 0, 1) << 4) |
+ (extract32(ri->crm, 0, 3) << 1) | extract32(ri->opc2, 2, 1);
+
+ tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */
+
+ if (ri->opc1 & 4) {
+ if (index >= cpu->pmsav8r_hdregion) {
+ return;
+ }
+ if (ri->opc2 & 0x1) {
+ env->pmsav8.hprlar[index] = value;
+ } else {
+ env->pmsav8.hprbar[index] = value;
+ }
+ } else {
+ if (index >= cpu->pmsav7_dregion) {
+ return;
+ }
+ if (ri->opc2 & 0x1) {
+ env->pmsav8.rlar[M_REG_NS][index] = value;
+ } else {
+ env->pmsav8.rbar[M_REG_NS][index] = value;
+ }
+ }
+}
+
+static uint64_t pmsav8r_regn_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ ARMCPU *cpu = env_archcpu(env);
+ uint8_t index = (extract32(ri->opc0, 0, 1) << 4) |
+ (extract32(ri->crm, 0, 3) << 1) | extract32(ri->opc2, 2, 1);
+
+ if (ri->opc1 & 4) {
+ if (index >= cpu->pmsav8r_hdregion) {
+ return 0x0;
+ }
+ if (ri->opc2 & 0x1) {
+ return env->pmsav8.hprlar[index];
+ } else {
+ return env->pmsav8.hprbar[index];
+ }
+ } else {
+ if (index >= cpu->pmsav7_dregion) {
+ return 0x0;
+ }
+ if (ri->opc2 & 0x1) {
+ return env->pmsav8.rlar[M_REG_NS][index];
+ } else {
+ return env->pmsav8.rbar[M_REG_NS][index];
+ }
+ }
+}
+
+static const ARMCPRegInfo pmsav8r_cp_reginfo[] = {
+ { .name = "PRBAR",
+ .cp = 15, .opc1 = 0, .crn = 6, .crm = 3, .opc2 = 0,
+ .access = PL1_RW, .type = ARM_CP_NO_RAW,
+ .accessfn = access_tvm_trvm,
+ .readfn = prbar_read, .writefn = prbar_write },
+ { .name = "PRLAR",
+ .cp = 15, .opc1 = 0, .crn = 6, .crm = 3, .opc2 = 1,
+ .access = PL1_RW, .type = ARM_CP_NO_RAW,
+ .accessfn = access_tvm_trvm,
+ .readfn = prlar_read, .writefn = prlar_write },
+ { .name = "PRSELR", .resetvalue = 0,
+ .cp = 15, .opc1 = 0, .crn = 6, .crm = 2, .opc2 = 1,
+ .access = PL1_RW, .accessfn = access_tvm_trvm,
+ .writefn = prselr_write,
+ .fieldoffset = offsetof(CPUARMState, pmsav7.rnr[M_REG_NS]) },
+ { .name = "HPRBAR", .resetvalue = 0,
+ .cp = 15, .opc1 = 4, .crn = 6, .crm = 3, .opc2 = 0,
+ .access = PL2_RW, .type = ARM_CP_NO_RAW,
+ .readfn = hprbar_read, .writefn = hprbar_write },
+ { .name = "HPRLAR",
+ .cp = 15, .opc1 = 4, .crn = 6, .crm = 3, .opc2 = 1,
+ .access = PL2_RW, .type = ARM_CP_NO_RAW,
+ .readfn = hprlar_read, .writefn = hprlar_write },
+ { .name = "HPRSELR", .resetvalue = 0,
+ .cp = 15, .opc1 = 4, .crn = 6, .crm = 2, .opc2 = 1,
+ .access = PL2_RW,
+ .writefn = hprselr_write,
+ .fieldoffset = offsetof(CPUARMState, pmsav8.hprselr) },
+ { .name = "HPRENR",
+ .cp = 15, .opc1 = 4, .crn = 6, .crm = 1, .opc2 = 1,
+ .access = PL2_RW, .type = ARM_CP_NO_RAW,
+ .readfn = hprenr_read, .writefn = hprenr_write },
+};
+
static const ARMCPRegInfo pmsav7_cp_reginfo[] = {
/* Reset for all these registers is handled in arm_cpu_reset(),
* because the PMSAv7 is also used by M-profile CPUs, which do
@@ -8207,6 +8423,13 @@ void register_cp_regs_for_features(ARMCPU *cpu)
.access = PL1_R, .type = ARM_CP_CONST,
.resetvalue = cpu->pmsav7_dregion << 8
};
+ /* HMPUIR is specific to PMSA V8 */
+ ARMCPRegInfo id_hmpuir_reginfo = {
+ .name = "HMPUIR",
+ .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 4,
+ .access = PL2_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->pmsav8r_hdregion
+ };
static const ARMCPRegInfo crn0_wi_reginfo = {
.name = "CRN0_WI", .cp = 15, .crn = 0, .crm = CP_ANY,
.opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_W,
@@ -8249,6 +8472,74 @@ void register_cp_regs_for_features(ARMCPU *cpu)
define_arm_cp_regs(cpu, id_cp_reginfo);
if (!arm_feature(env, ARM_FEATURE_PMSA)) {
define_one_arm_cp_reg(cpu, &id_tlbtr_reginfo);
+ } else if (arm_feature(env, ARM_FEATURE_PMSA) &&
+ arm_feature(env, ARM_FEATURE_V8)) {
+ uint32_t i = 0;
+ char *tmp_string;
+
+ define_one_arm_cp_reg(cpu, &id_mpuir_reginfo);
+ define_one_arm_cp_reg(cpu, &id_hmpuir_reginfo);
+ define_arm_cp_regs(cpu, pmsav8r_cp_reginfo);
+
+ /* Register alias is only valid for first 32 indexes */
+ for (i = 0; i < MIN(cpu->pmsav7_dregion, 32); ++i) {
+ uint8_t crm = 0b1000 | extract32(i, 1, 3);
+ uint8_t opc1 = extract32(i, 4, 1);
+ uint8_t opc2 = extract32(i, 0, 1) << 2;
+
+ tmp_string = g_strdup_printf("PRBAR%u", i);
+ ARMCPRegInfo tmp_prbarn_reginfo = {
+ .name = tmp_string, .type = ARM_CP_ALIAS | ARM_CP_NO_RAW,
+ .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2,
+ .access = PL1_RW, .resetvalue = 0,
+ .accessfn = access_tvm_trvm,
+ .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read
+ };
+ define_one_arm_cp_reg(cpu, &tmp_prbarn_reginfo);
+ g_free(tmp_string);
+
+ opc2 = extract32(i, 0, 1) << 2 | 0x1;
+ tmp_string = g_strdup_printf("PRLAR%u", i);
+ ARMCPRegInfo tmp_prlarn_reginfo = {
+ .name = tmp_string, .type = ARM_CP_ALIAS | ARM_CP_NO_RAW,
+ .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2,
+ .access = PL1_RW, .resetvalue = 0,
+ .accessfn = access_tvm_trvm,
+ .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read
+ };
+ define_one_arm_cp_reg(cpu, &tmp_prlarn_reginfo);
+ g_free(tmp_string);
+ }
+
+ /* Register alias is only valid for first 32 indexes */
+ for (i = 0; i < MIN(cpu->pmsav8r_hdregion, 32); ++i) {
+ uint8_t crm = 0b1000 | extract32(i, 1, 3);
+ uint8_t opc1 = 0b100 | extract32(i, 4, 1);
+ uint8_t opc2 = extract32(i, 0, 1) << 2;
+
+ tmp_string = g_strdup_printf("HPRBAR%u", i);
+ ARMCPRegInfo tmp_hprbarn_reginfo = {
+ .name = tmp_string,
+ .type = ARM_CP_NO_RAW,
+ .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2,
+ .access = PL2_RW, .resetvalue = 0,
+ .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read
+ };
+ define_one_arm_cp_reg(cpu, &tmp_hprbarn_reginfo);
+ g_free(tmp_string);
+
+ opc2 = extract32(i, 0, 1) << 2 | 0x1;
+ tmp_string = g_strdup_printf("HPRLAR%u", i);
+ ARMCPRegInfo tmp_hprlarn_reginfo = {
+ .name = tmp_string,
+ .type = ARM_CP_NO_RAW,
+ .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2,
+ .access = PL2_RW, .resetvalue = 0,
+ .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read
+ };
+ define_one_arm_cp_reg(cpu, &tmp_hprlarn_reginfo);
+ g_free(tmp_string);
+ }
} else if (arm_feature(env, ARM_FEATURE_V7)) {
define_one_arm_cp_reg(cpu, &id_mpuir_reginfo);
}
@@ -8370,6 +8661,17 @@ void register_cp_regs_for_features(ARMCPU *cpu)
sctlr.type |= ARM_CP_SUPPRESS_TB_END;
}
define_one_arm_cp_reg(cpu, &sctlr);
+
+ if (arm_feature(env, ARM_FEATURE_PMSA) &&
+ arm_feature(env, ARM_FEATURE_V8)) {
+ ARMCPRegInfo vsctlr = {
+ .name = "VSCTLR", .state = ARM_CP_STATE_AA32,
+ .cp = 15, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0,
+ .access = PL2_RW, .resetvalue = 0x0,
+ .fieldoffset = offsetoflow32(CPUARMState, cp15.vsctlr),
+ };
+ define_one_arm_cp_reg(cpu, &vsctlr);
+ }
}
if (cpu_isar_feature(aa64_lor, cpu)) {
diff --git a/target/arm/machine.c b/target/arm/machine.c
index 54c5c62433d..5f261526525 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -487,6 +487,30 @@ static bool pmsav8_needed(void *opaque)
arm_feature(env, ARM_FEATURE_V8);
}
+static bool pmsav8r_needed(void *opaque)
+{
+ ARMCPU *cpu = opaque;
+ CPUARMState *env = &cpu->env;
+
+ return arm_feature(env, ARM_FEATURE_PMSA) &&
+ arm_feature(env, ARM_FEATURE_V8) &&
+ !arm_feature(env, ARM_FEATURE_M);
+}
+
+static const VMStateDescription vmstate_pmsav8r = {
+ .name = "cpu/pmsav8/pmsav8r",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .needed = pmsav8r_needed,
+ .fields = (VMStateField[]) {
+ VMSTATE_VARRAY_UINT32(env.pmsav8.hprbar, ARMCPU,
+ pmsav8r_hdregion, 0, vmstate_info_uint32, uint32_t),
+ VMSTATE_VARRAY_UINT32(env.pmsav8.hprlar, ARMCPU,
+ pmsav8r_hdregion, 0, vmstate_info_uint32, uint32_t),
+ VMSTATE_END_OF_LIST()
+ },
+};
+
static const VMStateDescription vmstate_pmsav8 = {
.name = "cpu/pmsav8",
.version_id = 1,
@@ -500,6 +524,10 @@ static const VMStateDescription vmstate_pmsav8 = {
VMSTATE_UINT32(env.pmsav8.mair0[M_REG_NS], ARMCPU),
VMSTATE_UINT32(env.pmsav8.mair1[M_REG_NS], ARMCPU),
VMSTATE_END_OF_LIST()
+ },
+ .subsections = (const VMStateDescription * []) {
+ &vmstate_pmsav8r,
+ NULL
}
};
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 07/34] target/arm: Add PMSAv8r functionality
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (5 preceding siblings ...)
2023-01-05 16:43 ` [PULL 06/34] target/arm: Add PMSAv8r registers Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 08/34] target/arm: Add ARM Cortex-R52 CPU Peter Maydell
` (27 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Add PMSAv8r translation.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-7-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/ptw.c | 126 ++++++++++++++++++++++++++++++++++++++---------
1 file changed, 104 insertions(+), 22 deletions(-)
diff --git a/target/arm/ptw.c b/target/arm/ptw.c
index 1c7c9cb5e37..4bda0590c7c 100644
--- a/target/arm/ptw.c
+++ b/target/arm/ptw.c
@@ -1758,9 +1758,13 @@ static bool pmsav7_use_background_region(ARMCPU *cpu, ARMMMUIdx mmu_idx,
if (arm_feature(env, ARM_FEATURE_M)) {
return env->v7m.mpu_ctrl[is_secure] & R_V7M_MPU_CTRL_PRIVDEFENA_MASK;
- } else {
- return regime_sctlr(env, mmu_idx) & SCTLR_BR;
}
+
+ if (mmu_idx == ARMMMUIdx_Stage2) {
+ return false;
+ }
+
+ return regime_sctlr(env, mmu_idx) & SCTLR_BR;
}
static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address,
@@ -1952,6 +1956,26 @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address,
return !(result->f.prot & (1 << access_type));
}
+static uint32_t *regime_rbar(CPUARMState *env, ARMMMUIdx mmu_idx,
+ uint32_t secure)
+{
+ if (regime_el(env, mmu_idx) == 2) {
+ return env->pmsav8.hprbar;
+ } else {
+ return env->pmsav8.rbar[secure];
+ }
+}
+
+static uint32_t *regime_rlar(CPUARMState *env, ARMMMUIdx mmu_idx,
+ uint32_t secure)
+{
+ if (regime_el(env, mmu_idx) == 2) {
+ return env->pmsav8.hprlar;
+ } else {
+ return env->pmsav8.rlar[secure];
+ }
+}
+
bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
MMUAccessType access_type, ARMMMUIdx mmu_idx,
bool secure, GetPhysAddrResult *result,
@@ -1974,6 +1998,13 @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
bool hit = false;
uint32_t addr_page_base = address & TARGET_PAGE_MASK;
uint32_t addr_page_limit = addr_page_base + (TARGET_PAGE_SIZE - 1);
+ int region_counter;
+
+ if (regime_el(env, mmu_idx) == 2) {
+ region_counter = cpu->pmsav8r_hdregion;
+ } else {
+ region_counter = cpu->pmsav7_dregion;
+ }
result->f.lg_page_size = TARGET_PAGE_BITS;
result->f.phys_addr = address;
@@ -1982,6 +2013,10 @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
*mregion = -1;
}
+ if (mmu_idx == ARMMMUIdx_Stage2) {
+ fi->stage2 = true;
+ }
+
/*
* Unlike the ARM ARM pseudocode, we don't need to check whether this
* was an exception vector read from the vector table (which is always
@@ -1998,17 +2033,26 @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
hit = true;
}
- for (n = (int)cpu->pmsav7_dregion - 1; n >= 0; n--) {
+ uint32_t bitmask;
+ if (arm_feature(env, ARM_FEATURE_M)) {
+ bitmask = 0x1f;
+ } else {
+ bitmask = 0x3f;
+ fi->level = 0;
+ }
+
+ for (n = region_counter - 1; n >= 0; n--) {
/* region search */
/*
- * Note that the base address is bits [31:5] from the register
- * with bits [4:0] all zeroes, but the limit address is bits
- * [31:5] from the register with bits [4:0] all ones.
+ * Note that the base address is bits [31:x] from the register
+ * with bits [x-1:0] all zeroes, but the limit address is bits
+ * [31:x] from the register with bits [x:0] all ones. Where x is
+ * 5 for Cortex-M and 6 for Cortex-R
*/
- uint32_t base = env->pmsav8.rbar[secure][n] & ~0x1f;
- uint32_t limit = env->pmsav8.rlar[secure][n] | 0x1f;
+ uint32_t base = regime_rbar(env, mmu_idx, secure)[n] & ~bitmask;
+ uint32_t limit = regime_rlar(env, mmu_idx, secure)[n] | bitmask;
- if (!(env->pmsav8.rlar[secure][n] & 0x1)) {
+ if (!(regime_rlar(env, mmu_idx, secure)[n] & 0x1)) {
/* Region disabled */
continue;
}
@@ -2042,7 +2086,9 @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
* PMSAv7 where highest-numbered-region wins)
*/
fi->type = ARMFault_Permission;
- fi->level = 1;
+ if (arm_feature(env, ARM_FEATURE_M)) {
+ fi->level = 1;
+ }
return true;
}
@@ -2052,8 +2098,11 @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
}
if (!hit) {
- /* background fault */
- fi->type = ARMFault_Background;
+ if (arm_feature(env, ARM_FEATURE_M)) {
+ fi->type = ARMFault_Background;
+ } else {
+ fi->type = ARMFault_Permission;
+ }
return true;
}
@@ -2061,12 +2110,14 @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
/* hit using the background region */
get_phys_addr_pmsav7_default(env, mmu_idx, address, &result->f.prot);
} else {
- uint32_t ap = extract32(env->pmsav8.rbar[secure][matchregion], 1, 2);
- uint32_t xn = extract32(env->pmsav8.rbar[secure][matchregion], 0, 1);
+ uint32_t matched_rbar = regime_rbar(env, mmu_idx, secure)[matchregion];
+ uint32_t matched_rlar = regime_rlar(env, mmu_idx, secure)[matchregion];
+ uint32_t ap = extract32(matched_rbar, 1, 2);
+ uint32_t xn = extract32(matched_rbar, 0, 1);
bool pxn = false;
if (arm_feature(env, ARM_FEATURE_V8_1M)) {
- pxn = extract32(env->pmsav8.rlar[secure][matchregion], 4, 1);
+ pxn = extract32(matched_rlar, 4, 1);
}
if (m_is_system_region(env, address)) {
@@ -2074,21 +2125,46 @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
xn = 1;
}
- result->f.prot = simple_ap_to_rw_prot(env, mmu_idx, ap);
+ if (regime_el(env, mmu_idx) == 2) {
+ result->f.prot = simple_ap_to_rw_prot_is_user(ap,
+ mmu_idx != ARMMMUIdx_E2);
+ } else {
+ result->f.prot = simple_ap_to_rw_prot(env, mmu_idx, ap);
+ }
+
+ if (!arm_feature(env, ARM_FEATURE_M)) {
+ uint8_t attrindx = extract32(matched_rlar, 1, 3);
+ uint64_t mair = env->cp15.mair_el[regime_el(env, mmu_idx)];
+ uint8_t sh = extract32(matched_rlar, 3, 2);
+
+ if (regime_sctlr(env, mmu_idx) & SCTLR_WXN &&
+ result->f.prot & PAGE_WRITE && mmu_idx != ARMMMUIdx_Stage2) {
+ xn = 0x1;
+ }
+
+ if ((regime_el(env, mmu_idx) == 1) &&
+ regime_sctlr(env, mmu_idx) & SCTLR_UWXN && ap == 0x1) {
+ pxn = 0x1;
+ }
+
+ result->cacheattrs.is_s2_format = false;
+ result->cacheattrs.attrs = extract64(mair, attrindx * 8, 8);
+ result->cacheattrs.shareability = sh;
+ }
+
if (result->f.prot && !xn && !(pxn && !is_user)) {
result->f.prot |= PAGE_EXEC;
}
- /*
- * We don't need to look the attribute up in the MAIR0/MAIR1
- * registers because that only tells us about cacheability.
- */
+
if (mregion) {
*mregion = matchregion;
}
}
fi->type = ARMFault_Permission;
- fi->level = 1;
+ if (arm_feature(env, ARM_FEATURE_M)) {
+ fi->level = 1;
+ }
return !(result->f.prot & (1 << access_type));
}
@@ -2649,7 +2725,13 @@ static bool get_phys_addr_twostage(CPUARMState *env, S1Translate *ptw,
cacheattrs1 = result->cacheattrs;
memset(result, 0, sizeof(*result));
- ret = get_phys_addr_lpae(env, ptw, ipa, access_type, is_el0, result, fi);
+ if (arm_feature(env, ARM_FEATURE_PMSA)) {
+ ret = get_phys_addr_pmsav8(env, ipa, access_type,
+ ptw->in_mmu_idx, is_secure, result, fi);
+ } else {
+ ret = get_phys_addr_lpae(env, ptw, ipa, access_type,
+ is_el0, result, fi);
+ }
fi->s2addr = ipa;
/* Combine the S1 and S2 perms. */
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 08/34] target/arm: Add ARM Cortex-R52 CPU
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (6 preceding siblings ...)
2023-01-05 16:43 ` [PULL 07/34] target/arm: Add PMSAv8r functionality Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 09/34] target/arm: fix handling of HLT semihosting in system mode Peter Maydell
` (26 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
All constants are taken from the ARM Cortex-R52 Processor TRM Revision: r1p3
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-8-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu_tcg.c | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c
index 568cbcfc524..ccde5080eb7 100644
--- a/target/arm/cpu_tcg.c
+++ b/target/arm/cpu_tcg.c
@@ -854,6 +854,47 @@ static void cortex_r5_initfn(Object *obj)
define_arm_cp_regs(cpu, cortexr5_cp_reginfo);
}
+static void cortex_r52_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ set_feature(&cpu->env, ARM_FEATURE_V8);
+ set_feature(&cpu->env, ARM_FEATURE_EL2);
+ set_feature(&cpu->env, ARM_FEATURE_PMSA);
+ set_feature(&cpu->env, ARM_FEATURE_NEON);
+ set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
+ cpu->midr = 0x411fd133; /* r1p3 */
+ cpu->revidr = 0x00000000;
+ cpu->reset_fpsid = 0x41034023;
+ cpu->isar.mvfr0 = 0x10110222;
+ cpu->isar.mvfr1 = 0x12111111;
+ cpu->isar.mvfr2 = 0x00000043;
+ cpu->ctr = 0x8144c004;
+ cpu->reset_sctlr = 0x30c50838;
+ cpu->isar.id_pfr0 = 0x00000131;
+ cpu->isar.id_pfr1 = 0x10111001;
+ cpu->isar.id_dfr0 = 0x03010006;
+ cpu->id_afr0 = 0x00000000;
+ cpu->isar.id_mmfr0 = 0x00211040;
+ cpu->isar.id_mmfr1 = 0x40000000;
+ cpu->isar.id_mmfr2 = 0x01200000;
+ cpu->isar.id_mmfr3 = 0xf0102211;
+ cpu->isar.id_mmfr4 = 0x00000010;
+ cpu->isar.id_isar0 = 0x02101110;
+ cpu->isar.id_isar1 = 0x13112111;
+ cpu->isar.id_isar2 = 0x21232142;
+ cpu->isar.id_isar3 = 0x01112131;
+ cpu->isar.id_isar4 = 0x00010142;
+ cpu->isar.id_isar5 = 0x00010001;
+ cpu->isar.dbgdidr = 0x77168000;
+ cpu->clidr = (1 << 27) | (1 << 24) | 0x3;
+ cpu->ccsidr[0] = 0x700fe01a; /* 32KB L1 dcache */
+ cpu->ccsidr[1] = 0x201fe00a; /* 32KB L1 icache */
+
+ cpu->pmsav7_dregion = 16;
+ cpu->pmsav8r_hdregion = 16;
+}
+
static void cortex_r5f_initfn(Object *obj)
{
ARMCPU *cpu = ARM_CPU(obj);
@@ -1163,6 +1204,7 @@ static const ARMCPUInfo arm_tcg_cpus[] = {
.class_init = arm_v7m_class_init },
{ .name = "cortex-r5", .initfn = cortex_r5_initfn },
{ .name = "cortex-r5f", .initfn = cortex_r5f_initfn },
+ { .name = "cortex-r52", .initfn = cortex_r52_initfn },
{ .name = "ti925t", .initfn = ti925t_initfn },
{ .name = "sa1100", .initfn = sa1100_initfn },
{ .name = "sa1110", .initfn = sa1110_initfn },
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 09/34] target/arm: fix handling of HLT semihosting in system mode
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (7 preceding siblings ...)
2023-01-05 16:43 ` [PULL 08/34] target/arm: Add ARM Cortex-R52 CPU Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 10/34] hw/timer/imx_epit: improve comments Peter Maydell
` (25 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Alex Bennée <alex.bennee@linaro.org>
The check semihosting_enabled() wants to know if the guest is
currently in user mode. Unlike the other cases the test was inverted
causing us to block semihosting calls in non-EL0 modes.
Cc: qemu-stable@nongnu.org
Fixes: 19b26317e9 (target/arm: Honour -semihosting-config userspace=on)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/translate.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 74a903072fe..1dcaefb8e75 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -1184,7 +1184,7 @@ static inline void gen_hlt(DisasContext *s, int imm)
* semihosting, to provide some semblance of security
* (and for consistency with our 32-bit semihosting).
*/
- if (semihosting_enabled(s->current_el != 0) &&
+ if (semihosting_enabled(s->current_el == 0) &&
(imm == (s->thumb ? 0x3c : 0xf000))) {
gen_exception_internal_insn(s, EXCP_SEMIHOST);
return;
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 10/34] hw/timer/imx_epit: improve comments
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (8 preceding siblings ...)
2023-01-05 16:43 ` [PULL 09/34] target/arm: fix handling of HLT semihosting in system mode Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 11/34] hw/timer/imx_epit: cleanup CR defines Peter Maydell
` (24 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Axel Heider <axel.heider@hensoldt.net>
Fix typos, add background information
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/timer/imx_epit.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c
index ec0fa440d72..2841fbaa1c8 100644
--- a/hw/timer/imx_epit.c
+++ b/hw/timer/imx_epit.c
@@ -96,13 +96,14 @@ static void imx_epit_set_freq(IMXEPITState *s)
}
}
+/*
+ * This is called both on hardware (device) reset and software reset.
+ */
static void imx_epit_reset(DeviceState *dev)
{
IMXEPITState *s = IMX_EPIT(dev);
- /*
- * Soft reset doesn't touch some bits; hard reset clears them
- */
+ /* Soft reset doesn't touch some bits; hard reset clears them */
s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN);
s->sr = 0;
s->lr = EPIT_TIMER_MAX;
@@ -214,6 +215,7 @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value,
ptimer_transaction_begin(s->timer_cmp);
ptimer_transaction_begin(s->timer_reload);
+ /* Update the frequency. Has been done already in case of a reset. */
if (!(s->cr & CR_SWR)) {
imx_epit_set_freq(s);
}
@@ -254,7 +256,7 @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value,
break;
case 1: /* SR - ACK*/
- /* writing 1 to OCIF clear the OCIF bit */
+ /* writing 1 to OCIF clears the OCIF bit */
if (value & 0x01) {
s->sr = 0;
imx_epit_update_int(s);
@@ -352,8 +354,18 @@ static void imx_epit_realize(DeviceState *dev, Error **errp)
0x00001000);
sysbus_init_mmio(sbd, &s->iomem);
+ /*
+ * The reload timer keeps running when the peripheral is enabled. It is a
+ * kind of wall clock that does not generate any interrupts. The callback
+ * needs to be provided, but it does nothing as the ptimer already supports
+ * all necessary reloading functionality.
+ */
s->timer_reload = ptimer_init(imx_epit_reload, s, PTIMER_POLICY_LEGACY);
+ /*
+ * The compare timer is running only when the peripheral configuration is
+ * in a state that will generate compare interrupts.
+ */
s->timer_cmp = ptimer_init(imx_epit_cmp, s, PTIMER_POLICY_LEGACY);
}
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 11/34] hw/timer/imx_epit: cleanup CR defines
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (9 preceding siblings ...)
2023-01-05 16:43 ` [PULL 10/34] hw/timer/imx_epit: improve comments Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 12/34] hw/timer/imx_epit: define SR_OCIF Peter Maydell
` (23 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Axel Heider <axel.heider@hensoldt.net>
remove unused defines, add needed defines
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/timer/imx_epit.h | 4 ++--
hw/timer/imx_epit.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h
index 2acc41e9822..e2cb96229be 100644
--- a/include/hw/timer/imx_epit.h
+++ b/include/hw/timer/imx_epit.h
@@ -43,7 +43,7 @@
#define CR_OCIEN (1 << 2)
#define CR_RLD (1 << 3)
#define CR_PRESCALE_SHIFT (4)
-#define CR_PRESCALE_MASK (0xfff)
+#define CR_PRESCALE_BITS (12)
#define CR_SWR (1 << 16)
#define CR_IOVW (1 << 17)
#define CR_DBGEN (1 << 18)
@@ -51,7 +51,7 @@
#define CR_DOZEN (1 << 20)
#define CR_STOPEN (1 << 21)
#define CR_CLKSRC_SHIFT (24)
-#define CR_CLKSRC_MASK (0x3 << CR_CLKSRC_SHIFT)
+#define CR_CLKSRC_BITS (2)
#define EPIT_TIMER_MAX 0XFFFFFFFFUL
diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c
index 2841fbaa1c8..661e9158e3b 100644
--- a/hw/timer/imx_epit.c
+++ b/hw/timer/imx_epit.c
@@ -82,8 +82,8 @@ static void imx_epit_set_freq(IMXEPITState *s)
uint32_t clksrc;
uint32_t prescaler;
- clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, 2);
- prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, 12);
+ clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, CR_CLKSRC_BITS);
+ prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, CR_PRESCALE_BITS);
s->freq = imx_ccm_get_clock_frequency(s->ccm,
imx_epit_clocks[clksrc]) / prescaler;
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 12/34] hw/timer/imx_epit: define SR_OCIF
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (10 preceding siblings ...)
2023-01-05 16:43 ` [PULL 11/34] hw/timer/imx_epit: cleanup CR defines Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 13/34] hw/timer/imx_epit: update interrupt state on CR write access Peter Maydell
` (22 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Axel Heider <axel.heider@hensoldt.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/timer/imx_epit.h | 2 ++
hw/timer/imx_epit.c | 12 ++++++------
2 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h
index e2cb96229be..783eaf0c3a6 100644
--- a/include/hw/timer/imx_epit.h
+++ b/include/hw/timer/imx_epit.h
@@ -53,6 +53,8 @@
#define CR_CLKSRC_SHIFT (24)
#define CR_CLKSRC_BITS (2)
+#define SR_OCIF (1 << 0)
+
#define EPIT_TIMER_MAX 0XFFFFFFFFUL
#define TYPE_IMX_EPIT "imx.epit"
diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c
index 661e9158e3b..f148868b8cb 100644
--- a/hw/timer/imx_epit.c
+++ b/hw/timer/imx_epit.c
@@ -66,7 +66,7 @@ static const IMXClk imx_epit_clocks[] = {
*/
static void imx_epit_update_int(IMXEPITState *s)
{
- if (s->sr && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) {
+ if ((s->sr & SR_OCIF) && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) {
qemu_irq_raise(s->irq);
} else {
qemu_irq_lower(s->irq);
@@ -256,9 +256,9 @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value,
break;
case 1: /* SR - ACK*/
- /* writing 1 to OCIF clears the OCIF bit */
- if (value & 0x01) {
- s->sr = 0;
+ /* writing 1 to SR.OCIF clears this bit and turns the interrupt off */
+ if (value & SR_OCIF) {
+ s->sr = 0; /* SR.OCIF is the only bit in this register anyway */
imx_epit_update_int(s);
}
break;
@@ -309,8 +309,8 @@ static void imx_epit_cmp(void *opaque)
IMXEPITState *s = IMX_EPIT(opaque);
DPRINTF("sr was %d\n", s->sr);
-
- s->sr = 1;
+ /* Set interrupt status bit SR.OCIF and update the interrupt state */
+ s->sr |= SR_OCIF;
imx_epit_update_int(s);
}
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 13/34] hw/timer/imx_epit: update interrupt state on CR write access
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (11 preceding siblings ...)
2023-01-05 16:43 ` [PULL 12/34] hw/timer/imx_epit: define SR_OCIF Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 14/34] hw/timer/imx_epit: hard reset initializes CR with 0 Peter Maydell
` (21 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Axel Heider <axel.heider@hensoldt.net>
The interrupt state can change due to:
- reset clears both SR.OCIF and CR.OCIE
- write to CR.EN or CR.OCIE
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/timer/imx_epit.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c
index f148868b8cb..7af3a8b10e8 100644
--- a/hw/timer/imx_epit.c
+++ b/hw/timer/imx_epit.c
@@ -206,12 +206,20 @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value,
if (s->cr & CR_SWR) {
/* handle the reset */
imx_epit_reset(DEVICE(s));
- /*
- * TODO: could we 'break' here? following operations appear
- * to duplicate the work imx_epit_reset() already did.
- */
}
+ /*
+ * The interrupt state can change due to:
+ * - reset clears both SR.OCIF and CR.OCIE
+ * - write to CR.EN or CR.OCIE
+ */
+ imx_epit_update_int(s);
+
+ /*
+ * TODO: could we 'break' here for reset? following operations appear
+ * to duplicate the work imx_epit_reset() already did.
+ */
+
ptimer_transaction_begin(s->timer_cmp);
ptimer_transaction_begin(s->timer_reload);
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 14/34] hw/timer/imx_epit: hard reset initializes CR with 0
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (12 preceding siblings ...)
2023-01-05 16:43 ` [PULL 13/34] hw/timer/imx_epit: update interrupt state on CR write access Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 15/34] hw/timer/imx_epit: factor out register write handlers Peter Maydell
` (20 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Axel Heider <axel.heider@hensoldt.net>
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/timer/imx_epit.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c
index 7af3a8b10e8..39f47222d05 100644
--- a/hw/timer/imx_epit.c
+++ b/hw/timer/imx_epit.c
@@ -99,12 +99,14 @@ static void imx_epit_set_freq(IMXEPITState *s)
/*
* This is called both on hardware (device) reset and software reset.
*/
-static void imx_epit_reset(DeviceState *dev)
+static void imx_epit_reset(IMXEPITState *s, bool is_hard_reset)
{
- IMXEPITState *s = IMX_EPIT(dev);
-
/* Soft reset doesn't touch some bits; hard reset clears them */
- s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN);
+ if (is_hard_reset) {
+ s->cr = 0;
+ } else {
+ s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN);
+ }
s->sr = 0;
s->lr = EPIT_TIMER_MAX;
s->cmp = 0;
@@ -205,7 +207,7 @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value,
s->cr = value & 0x03ffffff;
if (s->cr & CR_SWR) {
/* handle the reset */
- imx_epit_reset(DEVICE(s));
+ imx_epit_reset(s, false);
}
/*
@@ -377,12 +379,18 @@ static void imx_epit_realize(DeviceState *dev, Error **errp)
s->timer_cmp = ptimer_init(imx_epit_cmp, s, PTIMER_POLICY_LEGACY);
}
+static void imx_epit_dev_reset(DeviceState *dev)
+{
+ IMXEPITState *s = IMX_EPIT(dev);
+ imx_epit_reset(s, true);
+}
+
static void imx_epit_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = imx_epit_realize;
- dc->reset = imx_epit_reset;
+ dc->reset = imx_epit_dev_reset;
dc->vmsd = &vmstate_imx_timer_epit;
dc->desc = "i.MX periodic timer";
}
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 15/34] hw/timer/imx_epit: factor out register write handlers
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (13 preceding siblings ...)
2023-01-05 16:43 ` [PULL 14/34] hw/timer/imx_epit: hard reset initializes CR with 0 Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:43 ` [PULL 16/34] hw/timer/imx_epit: remove explicit fields cnt and freq Peter Maydell
` (19 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Axel Heider <axel.heider@hensoldt.net>
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/timer/imx_epit.c | 215 ++++++++++++++++++++++++--------------------
1 file changed, 117 insertions(+), 98 deletions(-)
diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c
index 39f47222d05..e04427542ff 100644
--- a/hw/timer/imx_epit.c
+++ b/hw/timer/imx_epit.c
@@ -191,129 +191,148 @@ static void imx_epit_reload_compare_timer(IMXEPITState *s)
}
}
+static void imx_epit_write_cr(IMXEPITState *s, uint32_t value)
+{
+ uint32_t oldcr = s->cr;
+
+ s->cr = value & 0x03ffffff;
+
+ if (s->cr & CR_SWR) {
+ /* handle the reset */
+ imx_epit_reset(s, false);
+ }
+
+ /*
+ * The interrupt state can change due to:
+ * - reset clears both SR.OCIF and CR.OCIE
+ * - write to CR.EN or CR.OCIE
+ */
+ imx_epit_update_int(s);
+
+ /*
+ * TODO: could we 'break' here for reset? following operations appear
+ * to duplicate the work imx_epit_reset() already did.
+ */
+
+ ptimer_transaction_begin(s->timer_cmp);
+ ptimer_transaction_begin(s->timer_reload);
+
+ /* Update the frequency. Has been done already in case of a reset. */
+ if (!(s->cr & CR_SWR)) {
+ imx_epit_set_freq(s);
+ }
+
+ if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) {
+ if (s->cr & CR_ENMOD) {
+ if (s->cr & CR_RLD) {
+ ptimer_set_limit(s->timer_reload, s->lr, 1);
+ ptimer_set_limit(s->timer_cmp, s->lr, 1);
+ } else {
+ ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1);
+ ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1);
+ }
+ }
+
+ imx_epit_reload_compare_timer(s);
+ ptimer_run(s->timer_reload, 0);
+ if (s->cr & CR_OCIEN) {
+ ptimer_run(s->timer_cmp, 0);
+ } else {
+ ptimer_stop(s->timer_cmp);
+ }
+ } else if (!(s->cr & CR_EN)) {
+ /* stop both timers */
+ ptimer_stop(s->timer_reload);
+ ptimer_stop(s->timer_cmp);
+ } else if (s->cr & CR_OCIEN) {
+ if (!(oldcr & CR_OCIEN)) {
+ imx_epit_reload_compare_timer(s);
+ ptimer_run(s->timer_cmp, 0);
+ }
+ } else {
+ ptimer_stop(s->timer_cmp);
+ }
+
+ ptimer_transaction_commit(s->timer_cmp);
+ ptimer_transaction_commit(s->timer_reload);
+}
+
+static void imx_epit_write_sr(IMXEPITState *s, uint32_t value)
+{
+ /* writing 1 to SR.OCIF clears this bit and turns the interrupt off */
+ if (value & SR_OCIF) {
+ s->sr = 0; /* SR.OCIF is the only bit in this register anyway */
+ imx_epit_update_int(s);
+ }
+}
+
+static void imx_epit_write_lr(IMXEPITState *s, uint32_t value)
+{
+ s->lr = value;
+
+ ptimer_transaction_begin(s->timer_cmp);
+ ptimer_transaction_begin(s->timer_reload);
+ if (s->cr & CR_RLD) {
+ /* Also set the limit if the LRD bit is set */
+ /* If IOVW bit is set then set the timer value */
+ ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW);
+ ptimer_set_limit(s->timer_cmp, s->lr, 0);
+ } else if (s->cr & CR_IOVW) {
+ /* If IOVW bit is set then set the timer value */
+ ptimer_set_count(s->timer_reload, s->lr);
+ }
+ /*
+ * Commit the change to s->timer_reload, so it can propagate. Otherwise
+ * the timer interrupt may not fire properly. The commit must happen
+ * before calling imx_epit_reload_compare_timer(), which reads
+ * s->timer_reload internally again.
+ */
+ ptimer_transaction_commit(s->timer_reload);
+ imx_epit_reload_compare_timer(s);
+ ptimer_transaction_commit(s->timer_cmp);
+}
+
+static void imx_epit_write_cmp(IMXEPITState *s, uint32_t value)
+{
+ s->cmp = value;
+
+ ptimer_transaction_begin(s->timer_cmp);
+ imx_epit_reload_compare_timer(s);
+ ptimer_transaction_commit(s->timer_cmp);
+}
+
static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
IMXEPITState *s = IMX_EPIT(opaque);
- uint64_t oldcr;
DPRINTF("(%s, value = 0x%08x)\n", imx_epit_reg_name(offset >> 2),
(uint32_t)value);
switch (offset >> 2) {
case 0: /* CR */
-
- oldcr = s->cr;
- s->cr = value & 0x03ffffff;
- if (s->cr & CR_SWR) {
- /* handle the reset */
- imx_epit_reset(s, false);
- }
-
- /*
- * The interrupt state can change due to:
- * - reset clears both SR.OCIF and CR.OCIE
- * - write to CR.EN or CR.OCIE
- */
- imx_epit_update_int(s);
-
- /*
- * TODO: could we 'break' here for reset? following operations appear
- * to duplicate the work imx_epit_reset() already did.
- */
-
- ptimer_transaction_begin(s->timer_cmp);
- ptimer_transaction_begin(s->timer_reload);
-
- /* Update the frequency. Has been done already in case of a reset. */
- if (!(s->cr & CR_SWR)) {
- imx_epit_set_freq(s);
- }
-
- if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) {
- if (s->cr & CR_ENMOD) {
- if (s->cr & CR_RLD) {
- ptimer_set_limit(s->timer_reload, s->lr, 1);
- ptimer_set_limit(s->timer_cmp, s->lr, 1);
- } else {
- ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1);
- ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1);
- }
- }
-
- imx_epit_reload_compare_timer(s);
- ptimer_run(s->timer_reload, 0);
- if (s->cr & CR_OCIEN) {
- ptimer_run(s->timer_cmp, 0);
- } else {
- ptimer_stop(s->timer_cmp);
- }
- } else if (!(s->cr & CR_EN)) {
- /* stop both timers */
- ptimer_stop(s->timer_reload);
- ptimer_stop(s->timer_cmp);
- } else if (s->cr & CR_OCIEN) {
- if (!(oldcr & CR_OCIEN)) {
- imx_epit_reload_compare_timer(s);
- ptimer_run(s->timer_cmp, 0);
- }
- } else {
- ptimer_stop(s->timer_cmp);
- }
-
- ptimer_transaction_commit(s->timer_cmp);
- ptimer_transaction_commit(s->timer_reload);
+ imx_epit_write_cr(s, (uint32_t)value);
break;
- case 1: /* SR - ACK*/
- /* writing 1 to SR.OCIF clears this bit and turns the interrupt off */
- if (value & SR_OCIF) {
- s->sr = 0; /* SR.OCIF is the only bit in this register anyway */
- imx_epit_update_int(s);
- }
+ case 1: /* SR */
+ imx_epit_write_sr(s, (uint32_t)value);
break;
- case 2: /* LR - set ticks */
- s->lr = value;
-
- ptimer_transaction_begin(s->timer_cmp);
- ptimer_transaction_begin(s->timer_reload);
- if (s->cr & CR_RLD) {
- /* Also set the limit if the LRD bit is set */
- /* If IOVW bit is set then set the timer value */
- ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW);
- ptimer_set_limit(s->timer_cmp, s->lr, 0);
- } else if (s->cr & CR_IOVW) {
- /* If IOVW bit is set then set the timer value */
- ptimer_set_count(s->timer_reload, s->lr);
- }
- /*
- * Commit the change to s->timer_reload, so it can propagate. Otherwise
- * the timer interrupt may not fire properly. The commit must happen
- * before calling imx_epit_reload_compare_timer(), which reads
- * s->timer_reload internally again.
- */
- ptimer_transaction_commit(s->timer_reload);
- imx_epit_reload_compare_timer(s);
- ptimer_transaction_commit(s->timer_cmp);
+ case 2: /* LR */
+ imx_epit_write_lr(s, (uint32_t)value);
break;
case 3: /* CMP */
- s->cmp = value;
-
- ptimer_transaction_begin(s->timer_cmp);
- imx_epit_reload_compare_timer(s);
- ptimer_transaction_commit(s->timer_cmp);
-
+ imx_epit_write_cmp(s, (uint32_t)value);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
HWADDR_PRIx "\n", TYPE_IMX_EPIT, __func__, offset);
-
break;
}
}
+
static void imx_epit_cmp(void *opaque)
{
IMXEPITState *s = IMX_EPIT(opaque);
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 16/34] hw/timer/imx_epit: remove explicit fields cnt and freq
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (14 preceding siblings ...)
2023-01-05 16:43 ` [PULL 15/34] hw/timer/imx_epit: factor out register write handlers Peter Maydell
@ 2023-01-05 16:43 ` Peter Maydell
2023-01-05 16:44 ` [PULL 17/34] hw/timer/imx_epit: fix compare timer handling Peter Maydell
` (18 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:43 UTC (permalink / raw)
To: qemu-devel
From: Axel Heider <axel.heider@hensoldt.net>
The CNT register is a read-only register. There is no need to
store it's value, it can be calculated on demand.
The calculated frequency is needed temporarily only.
Note that this is a migration compatibility break for all boards
types that use the EPIT peripheral.
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/timer/imx_epit.h | 2 -
hw/timer/imx_epit.c | 73 ++++++++++++++-----------------------
2 files changed, 28 insertions(+), 47 deletions(-)
diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h
index 783eaf0c3a6..79aff0cec20 100644
--- a/include/hw/timer/imx_epit.h
+++ b/include/hw/timer/imx_epit.h
@@ -74,9 +74,7 @@ struct IMXEPITState {
uint32_t sr;
uint32_t lr;
uint32_t cmp;
- uint32_t cnt;
- uint32_t freq;
qemu_irq irq;
};
diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c
index e04427542ff..cf134961650 100644
--- a/hw/timer/imx_epit.c
+++ b/hw/timer/imx_epit.c
@@ -73,27 +73,14 @@ static void imx_epit_update_int(IMXEPITState *s)
}
}
-/*
- * Must be called from within a ptimer_transaction_begin/commit block
- * for both s->timer_cmp and s->timer_reload.
- */
-static void imx_epit_set_freq(IMXEPITState *s)
+static uint32_t imx_epit_get_freq(IMXEPITState *s)
{
- uint32_t clksrc;
- uint32_t prescaler;
-
- clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, CR_CLKSRC_BITS);
- prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, CR_PRESCALE_BITS);
-
- s->freq = imx_ccm_get_clock_frequency(s->ccm,
- imx_epit_clocks[clksrc]) / prescaler;
-
- DPRINTF("Setting ptimer frequency to %u\n", s->freq);
-
- if (s->freq) {
- ptimer_set_freq(s->timer_reload, s->freq);
- ptimer_set_freq(s->timer_cmp, s->freq);
- }
+ uint32_t clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, CR_CLKSRC_BITS);
+ uint32_t prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, CR_PRESCALE_BITS);
+ uint32_t f_in = imx_ccm_get_clock_frequency(s->ccm, imx_epit_clocks[clksrc]);
+ uint32_t freq = f_in / prescaler;
+ DPRINTF("ptimer frequency is %u\n", freq);
+ return freq;
}
/*
@@ -110,32 +97,23 @@ static void imx_epit_reset(IMXEPITState *s, bool is_hard_reset)
s->sr = 0;
s->lr = EPIT_TIMER_MAX;
s->cmp = 0;
- s->cnt = 0;
ptimer_transaction_begin(s->timer_cmp);
ptimer_transaction_begin(s->timer_reload);
- /* stop both timers */
+
+ /*
+ * The reset switches off the input clock, so even if the CR.EN is still
+ * set, the timers are no longer running.
+ */
+ assert(imx_epit_get_freq(s) == 0);
ptimer_stop(s->timer_cmp);
ptimer_stop(s->timer_reload);
- /* compute new frequency */
- imx_epit_set_freq(s);
/* init both timers to EPIT_TIMER_MAX */
ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1);
ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1);
- if (s->freq && (s->cr & CR_EN)) {
- /* if the timer is still enabled, restart it */
- ptimer_run(s->timer_reload, 0);
- }
ptimer_transaction_commit(s->timer_cmp);
ptimer_transaction_commit(s->timer_reload);
}
-static uint32_t imx_epit_update_count(IMXEPITState *s)
-{
- s->cnt = ptimer_get_count(s->timer_reload);
-
- return s->cnt;
-}
-
static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size)
{
IMXEPITState *s = IMX_EPIT(opaque);
@@ -159,8 +137,7 @@ static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size)
break;
case 4: /* CNT */
- imx_epit_update_count(s);
- reg_value = s->cnt;
+ reg_value = ptimer_get_count(s->timer_reload);
break;
default:
@@ -179,7 +156,7 @@ static void imx_epit_reload_compare_timer(IMXEPITState *s)
{
if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) {
/* if the compare feature is on and timers are running */
- uint32_t tmp = imx_epit_update_count(s);
+ uint32_t tmp = ptimer_get_count(s->timer_reload);
uint64_t next;
if (tmp > s->cmp) {
/* It'll fire in this round of the timer */
@@ -193,6 +170,7 @@ static void imx_epit_reload_compare_timer(IMXEPITState *s)
static void imx_epit_write_cr(IMXEPITState *s, uint32_t value)
{
+ uint32_t freq = 0;
uint32_t oldcr = s->cr;
s->cr = value & 0x03ffffff;
@@ -217,12 +195,19 @@ static void imx_epit_write_cr(IMXEPITState *s, uint32_t value)
ptimer_transaction_begin(s->timer_cmp);
ptimer_transaction_begin(s->timer_reload);
- /* Update the frequency. Has been done already in case of a reset. */
+ /*
+ * Update the frequency. In case of a reset the input clock was
+ * switched off, so this can be skipped.
+ */
if (!(s->cr & CR_SWR)) {
- imx_epit_set_freq(s);
+ freq = imx_epit_get_freq(s);
+ if (freq) {
+ ptimer_set_freq(s->timer_reload, freq);
+ ptimer_set_freq(s->timer_cmp, freq);
+ }
}
- if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) {
+ if (freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) {
if (s->cr & CR_ENMOD) {
if (s->cr & CR_RLD) {
ptimer_set_limit(s->timer_reload, s->lr, 1);
@@ -356,15 +341,13 @@ static const MemoryRegionOps imx_epit_ops = {
static const VMStateDescription vmstate_imx_timer_epit = {
.name = TYPE_IMX_EPIT,
- .version_id = 2,
- .minimum_version_id = 2,
+ .version_id = 3,
+ .minimum_version_id = 3,
.fields = (VMStateField[]) {
VMSTATE_UINT32(cr, IMXEPITState),
VMSTATE_UINT32(sr, IMXEPITState),
VMSTATE_UINT32(lr, IMXEPITState),
VMSTATE_UINT32(cmp, IMXEPITState),
- VMSTATE_UINT32(cnt, IMXEPITState),
- VMSTATE_UINT32(freq, IMXEPITState),
VMSTATE_PTIMER(timer_reload, IMXEPITState),
VMSTATE_PTIMER(timer_cmp, IMXEPITState),
VMSTATE_END_OF_LIST()
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 17/34] hw/timer/imx_epit: fix compare timer handling
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (15 preceding siblings ...)
2023-01-05 16:43 ` [PULL 16/34] hw/timer/imx_epit: remove explicit fields cnt and freq Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 18/34] target/arm: Fix checkpatch comment style warnings in helper.c Peter Maydell
` (17 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Axel Heider <axel.heider@hensoldt.net>
- fix #1263 for CR writes
- rework compare time handling
- The compare timer has to run even if CR.OCIEN is not set,
as SR.OCIF must be updated.
- The compare timer fires exactly once when the
compare value is less than the current value, but the
reload values is less than the compare value.
- The compare timer will never fire if the reload value is
less than the compare value. Disable it in this case.
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
[PMM: fixed minor style nits]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/timer/imx_epit.c | 192 ++++++++++++++++++++++++++------------------
1 file changed, 116 insertions(+), 76 deletions(-)
diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c
index cf134961650..3a869782bcd 100644
--- a/hw/timer/imx_epit.c
+++ b/hw/timer/imx_epit.c
@@ -6,6 +6,7 @@
* Originally written by Hans Jiang
* Updated by Peter Chubb
* Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
+ * Updated by Axel Heider
*
* This code is licensed under GPL version 2 or later. See
* the COPYING file in the top-level directory.
@@ -151,33 +152,126 @@ static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size)
return reg_value;
}
-/* Must be called from ptimer_transaction_begin/commit block for s->timer_cmp */
-static void imx_epit_reload_compare_timer(IMXEPITState *s)
+/*
+ * Must be called from a ptimer_transaction_begin/commit block for
+ * s->timer_cmp, but outside of a transaction block of s->timer_reload,
+ * so the proper counter value is read.
+ */
+static void imx_epit_update_compare_timer(IMXEPITState *s)
{
- if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) {
- /* if the compare feature is on and timers are running */
- uint32_t tmp = ptimer_get_count(s->timer_reload);
- uint64_t next;
- if (tmp > s->cmp) {
- /* It'll fire in this round of the timer */
- next = tmp - s->cmp;
- } else { /* catch it next time around */
- next = tmp - s->cmp + ((s->cr & CR_RLD) ? EPIT_TIMER_MAX : s->lr);
+ uint64_t counter = 0;
+ bool is_oneshot = false;
+ /*
+ * The compare timer only has to run if the timer peripheral is active
+ * and there is an input clock, Otherwise it can be switched off.
+ */
+ bool is_active = (s->cr & CR_EN) && imx_epit_get_freq(s);
+ if (is_active) {
+ /*
+ * Calculate next timeout for compare timer. Reading the reload
+ * counter returns proper results only if pending transactions
+ * on it are committed here. Otherwise stale values are be read.
+ */
+ counter = ptimer_get_count(s->timer_reload);
+ uint64_t limit = ptimer_get_limit(s->timer_cmp);
+ /*
+ * The compare timer is a periodic timer if the limit is at least
+ * the compare value. Otherwise it may fire at most once in the
+ * current round.
+ */
+ bool is_oneshot = (limit >= s->cmp);
+ if (counter >= s->cmp) {
+ /* The compare timer fires in the current round. */
+ counter -= s->cmp;
+ } else if (!is_oneshot) {
+ /*
+ * The compare timer fires after a reload, as it is below the
+ * compare value already in this round. Note that the counter
+ * value calculated below can be above the 32-bit limit, which
+ * is legal here because the compare timer is an internal
+ * helper ptimer only.
+ */
+ counter += limit - s->cmp;
+ } else {
+ /*
+ * The compare timer won't fire in this round, and the limit is
+ * set to a value below the compare value. This practically means
+ * it will never fire, so it can be switched off.
+ */
+ is_active = false;
}
- ptimer_set_count(s->timer_cmp, next);
}
+
+ /*
+ * Set the compare timer and let it run, or stop it. This is agnostic
+ * of CR.OCIEN bit, as this bit affects interrupt generation only. The
+ * compare timer needs to run even if no interrupts are to be generated,
+ * because the SR.OCIF bit must be updated also.
+ * Note that the timer might already be stopped or be running with
+ * counter values. However, finding out when an update is needed and
+ * when not is not trivial. It's much easier applying the setting again,
+ * as this does not harm either and the overhead is negligible.
+ */
+ if (is_active) {
+ ptimer_set_count(s->timer_cmp, counter);
+ ptimer_run(s->timer_cmp, is_oneshot ? 1 : 0);
+ } else {
+ ptimer_stop(s->timer_cmp);
+ }
+
}
static void imx_epit_write_cr(IMXEPITState *s, uint32_t value)
{
- uint32_t freq = 0;
uint32_t oldcr = s->cr;
s->cr = value & 0x03ffffff;
if (s->cr & CR_SWR) {
- /* handle the reset */
+ /*
+ * Reset clears CR.SWR again. It does not touch CR.EN, but the timers
+ * are still stopped because the input clock is disabled.
+ */
imx_epit_reset(s, false);
+ } else {
+ uint32_t freq;
+ uint32_t toggled_cr_bits = oldcr ^ s->cr;
+ /* re-initialize the limits if CR.RLD has changed */
+ bool set_limit = toggled_cr_bits & CR_RLD;
+ /* set the counter if the timer got just enabled and CR.ENMOD is set */
+ bool is_switched_on = (toggled_cr_bits & s->cr) & CR_EN;
+ bool set_counter = is_switched_on && (s->cr & CR_ENMOD);
+
+ ptimer_transaction_begin(s->timer_cmp);
+ ptimer_transaction_begin(s->timer_reload);
+ freq = imx_epit_get_freq(s);
+ if (freq) {
+ ptimer_set_freq(s->timer_reload, freq);
+ ptimer_set_freq(s->timer_cmp, freq);
+ }
+
+ if (set_limit || set_counter) {
+ uint64_t limit = (s->cr & CR_RLD) ? s->lr : EPIT_TIMER_MAX;
+ ptimer_set_limit(s->timer_reload, limit, set_counter ? 1 : 0);
+ if (set_limit) {
+ ptimer_set_limit(s->timer_cmp, limit, 0);
+ }
+ }
+ /*
+ * If there is an input clock and the peripheral is enabled, then
+ * ensure the wall clock timer is ticking. Otherwise stop the timers.
+ * The compare timer will be updated later.
+ */
+ if (freq && (s->cr & CR_EN)) {
+ ptimer_run(s->timer_reload, 0);
+ } else {
+ ptimer_stop(s->timer_reload);
+ }
+ /* Commit changes to reload timer, so they can propagate. */
+ ptimer_transaction_commit(s->timer_reload);
+ /* Update compare timer based on the committed reload timer value. */
+ imx_epit_update_compare_timer(s);
+ ptimer_transaction_commit(s->timer_cmp);
}
/*
@@ -186,60 +280,6 @@ static void imx_epit_write_cr(IMXEPITState *s, uint32_t value)
* - write to CR.EN or CR.OCIE
*/
imx_epit_update_int(s);
-
- /*
- * TODO: could we 'break' here for reset? following operations appear
- * to duplicate the work imx_epit_reset() already did.
- */
-
- ptimer_transaction_begin(s->timer_cmp);
- ptimer_transaction_begin(s->timer_reload);
-
- /*
- * Update the frequency. In case of a reset the input clock was
- * switched off, so this can be skipped.
- */
- if (!(s->cr & CR_SWR)) {
- freq = imx_epit_get_freq(s);
- if (freq) {
- ptimer_set_freq(s->timer_reload, freq);
- ptimer_set_freq(s->timer_cmp, freq);
- }
- }
-
- if (freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) {
- if (s->cr & CR_ENMOD) {
- if (s->cr & CR_RLD) {
- ptimer_set_limit(s->timer_reload, s->lr, 1);
- ptimer_set_limit(s->timer_cmp, s->lr, 1);
- } else {
- ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1);
- ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1);
- }
- }
-
- imx_epit_reload_compare_timer(s);
- ptimer_run(s->timer_reload, 0);
- if (s->cr & CR_OCIEN) {
- ptimer_run(s->timer_cmp, 0);
- } else {
- ptimer_stop(s->timer_cmp);
- }
- } else if (!(s->cr & CR_EN)) {
- /* stop both timers */
- ptimer_stop(s->timer_reload);
- ptimer_stop(s->timer_cmp);
- } else if (s->cr & CR_OCIEN) {
- if (!(oldcr & CR_OCIEN)) {
- imx_epit_reload_compare_timer(s);
- ptimer_run(s->timer_cmp, 0);
- }
- } else {
- ptimer_stop(s->timer_cmp);
- }
-
- ptimer_transaction_commit(s->timer_cmp);
- ptimer_transaction_commit(s->timer_reload);
}
static void imx_epit_write_sr(IMXEPITState *s, uint32_t value)
@@ -266,14 +306,10 @@ static void imx_epit_write_lr(IMXEPITState *s, uint32_t value)
/* If IOVW bit is set then set the timer value */
ptimer_set_count(s->timer_reload, s->lr);
}
- /*
- * Commit the change to s->timer_reload, so it can propagate. Otherwise
- * the timer interrupt may not fire properly. The commit must happen
- * before calling imx_epit_reload_compare_timer(), which reads
- * s->timer_reload internally again.
- */
+ /* Commit the changes to s->timer_reload, so they can propagate. */
ptimer_transaction_commit(s->timer_reload);
- imx_epit_reload_compare_timer(s);
+ /* Update the compare timer based on the committed reload timer value. */
+ imx_epit_update_compare_timer(s);
ptimer_transaction_commit(s->timer_cmp);
}
@@ -281,8 +317,9 @@ static void imx_epit_write_cmp(IMXEPITState *s, uint32_t value)
{
s->cmp = value;
+ /* Update the compare timer based on the committed reload timer value. */
ptimer_transaction_begin(s->timer_cmp);
- imx_epit_reload_compare_timer(s);
+ imx_epit_update_compare_timer(s);
ptimer_transaction_commit(s->timer_cmp);
}
@@ -322,6 +359,9 @@ static void imx_epit_cmp(void *opaque)
{
IMXEPITState *s = IMX_EPIT(opaque);
+ /* The cmp ptimer can't be running when the peripheral is disabled */
+ assert(s->cr & CR_EN);
+
DPRINTF("sr was %d\n", s->sr);
/* Set interrupt status bit SR.OCIF and update the interrupt state */
s->sr |= SR_OCIF;
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 18/34] target/arm: Fix checkpatch comment style warnings in helper.c
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (16 preceding siblings ...)
2023-01-05 16:44 ` [PULL 17/34] hw/timer/imx_epit: fix compare timer handling Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 19/34] target/arm: Fix checkpatch space errors " Peter Maydell
` (16 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Fabiano Rosas <farosas@suse.de>
Fix these:
WARNING: Block comments use a leading /* on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-2-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper.c | 323 +++++++++++++++++++++++++++++---------------
1 file changed, 215 insertions(+), 108 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index b13f6ff328c..a5f96ab77dd 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -83,7 +83,8 @@ uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri)
static void write_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t v)
{
- /* Raw write of a coprocessor register (as needed for migration, etc).
+ /*
+ * Raw write of a coprocessor register (as needed for migration, etc).
* Note that constant registers are treated as write-ignored; the
* caller should check for success by whether a readback gives the
* value written.
@@ -101,7 +102,8 @@ static void write_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri,
static bool raw_accessors_invalid(const ARMCPRegInfo *ri)
{
- /* Return true if the regdef would cause an assertion if you called
+ /*
+ * Return true if the regdef would cause an assertion if you called
* read_raw_cp_reg() or write_raw_cp_reg() on it (ie if it is a
* program bug for it not to have the NO_RAW flag).
* NB that returning false here doesn't necessarily mean that calling
@@ -184,7 +186,8 @@ bool write_list_to_cpustate(ARMCPU *cpu)
if (ri->type & ARM_CP_NO_RAW) {
continue;
}
- /* Write value and confirm it reads back as written
+ /*
+ * Write value and confirm it reads back as written
* (to catch read-only registers and partially read-only
* registers where the incoming migration value doesn't match)
*/
@@ -237,7 +240,8 @@ static gint cpreg_key_compare(gconstpointer a, gconstpointer b)
void init_cpreg_list(ARMCPU *cpu)
{
- /* Initialise the cpreg_tuples[] array based on the cp_regs hash.
+ /*
+ * Initialise the cpreg_tuples[] array based on the cp_regs hash.
* Note that we require cpreg_tuples[] to be sorted by key ID.
*/
GList *keys;
@@ -279,7 +283,8 @@ static CPAccessResult access_el3_aa32ns(CPUARMState *env,
return CP_ACCESS_OK;
}
-/* Some secure-only AArch32 registers trap to EL3 if used from
+/*
+ * Some secure-only AArch32 registers trap to EL3 if used from
* Secure EL1 (but are just ordinary UNDEF in other non-EL3 contexts).
* Note that an access from Secure EL1 can only happen if EL3 is AArch64.
* We assume that the .access field is set to PL1_RW.
@@ -301,7 +306,8 @@ static CPAccessResult access_trap_aa32s_el1(CPUARMState *env,
return CP_ACCESS_TRAP_UNCATEGORIZED;
}
-/* Check for traps to performance monitor registers, which are controlled
+/*
+ * Check for traps to performance monitor registers, which are controlled
* by MDCR_EL2.TPM for EL2 and MDCR_EL3.TPM for EL3.
*/
static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -399,7 +405,8 @@ static void fcse_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
ARMCPU *cpu = env_archcpu(env);
if (raw_read(env, ri) != value) {
- /* Unlike real hardware the qemu TLB uses virtual addresses,
+ /*
+ * Unlike real hardware the qemu TLB uses virtual addresses,
* not modified virtual addresses, so this causes a TLB flush.
*/
tlb_flush(CPU(cpu));
@@ -414,7 +421,8 @@ static void contextidr_write(CPUARMState *env, const ARMCPRegInfo *ri,
if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_PMSA)
&& !extended_addresses_enabled(env)) {
- /* For VMSA (when not using the LPAE long descriptor page table
+ /*
+ * For VMSA (when not using the LPAE long descriptor page table
* format) this register includes the ASID, so do a TLB flush.
* For PMSA it is purely a process ID and no action is needed.
*/
@@ -606,7 +614,8 @@ static void tlbiipas2is_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri,
}
static const ARMCPRegInfo cp_reginfo[] = {
- /* Define the secure and non-secure FCSE identifier CP registers
+ /*
+ * Define the secure and non-secure FCSE identifier CP registers
* separately because there is no secure bank in V8 (no _EL3). This allows
* the secure register to be properly reset and migrated. There is also no
* v8 EL1 version of the register so the non-secure instance stands alone.
@@ -621,7 +630,8 @@ static const ARMCPRegInfo cp_reginfo[] = {
.access = PL1_RW, .secure = ARM_CP_SECSTATE_S,
.fieldoffset = offsetof(CPUARMState, cp15.fcseidr_s),
.resetvalue = 0, .writefn = fcse_write, .raw_writefn = raw_write, },
- /* Define the secure and non-secure context identifier CP registers
+ /*
+ * Define the secure and non-secure context identifier CP registers
* separately because there is no secure bank in V8 (no _EL3). This allows
* the secure register to be properly reset and migrated. In the
* non-secure case, the 32-bit register will have reset and migration
@@ -642,7 +652,8 @@ static const ARMCPRegInfo cp_reginfo[] = {
};
static const ARMCPRegInfo not_v8_cp_reginfo[] = {
- /* NB: Some of these registers exist in v8 but with more precise
+ /*
+ * NB: Some of these registers exist in v8 but with more precise
* definitions that don't use CP_ANY wildcards (mostly in v8_cp_reginfo[]).
*/
/* MMU Domain access control / MPU write buffer control */
@@ -652,7 +663,8 @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = {
.writefn = dacr_write, .raw_writefn = raw_write,
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s),
offsetoflow32(CPUARMState, cp15.dacr_ns) } },
- /* ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs.
+ /*
+ * ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs.
* For v6 and v5, these mappings are overly broad.
*/
{ .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 0,
@@ -670,7 +682,8 @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = {
};
static const ARMCPRegInfo not_v6_cp_reginfo[] = {
- /* Not all pre-v6 cores implemented this WFI, so this is slightly
+ /*
+ * Not all pre-v6 cores implemented this WFI, so this is slightly
* over-broad.
*/
{ .name = "WFI_v5", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = 2,
@@ -678,12 +691,14 @@ static const ARMCPRegInfo not_v6_cp_reginfo[] = {
};
static const ARMCPRegInfo not_v7_cp_reginfo[] = {
- /* Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which
+ /*
+ * Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which
* is UNPREDICTABLE; we choose to NOP as most implementations do).
*/
{ .name = "WFI_v6", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4,
.access = PL1_W, .type = ARM_CP_WFI },
- /* L1 cache lockdown. Not architectural in v6 and earlier but in practice
+ /*
+ * L1 cache lockdown. Not architectural in v6 and earlier but in practice
* implemented in 926, 946, 1026, 1136, 1176 and 11MPCore. StrongARM and
* OMAPCP will override this space.
*/
@@ -697,14 +712,16 @@ static const ARMCPRegInfo not_v7_cp_reginfo[] = {
{ .name = "DUMMY", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = CP_ANY,
.access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW,
.resetvalue = 0 },
- /* We don't implement pre-v7 debug but most CPUs had at least a DBGDIDR;
+ /*
+ * We don't implement pre-v7 debug but most CPUs had at least a DBGDIDR;
* implementing it as RAZ means the "debug architecture version" bits
* will read as a reserved value, which should cause Linux to not try
* to use the debug hardware.
*/
{ .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0,
.access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 },
- /* MMU TLB control. Note that the wildcarding means we cover not just
+ /*
+ * MMU TLB control. Note that the wildcarding means we cover not just
* the unified TLB ops but also the dside/iside/inner-shareable variants.
*/
{ .name = "TLBIALL", .cp = 15, .crn = 8, .crm = CP_ANY,
@@ -732,7 +749,8 @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri,
/* In ARMv8 most bits of CPACR_EL1 are RES0. */
if (!arm_feature(env, ARM_FEATURE_V8)) {
- /* ARMv7 defines bits for unimplemented coprocessors as RAZ/WI.
+ /*
+ * ARMv7 defines bits for unimplemented coprocessors as RAZ/WI.
* ASEDIS [31] and D32DIS [30] are both UNK/SBZP without VFP.
* TRCDIS [28] is RAZ/WI since we do not implement a trace macrocell.
*/
@@ -748,7 +766,8 @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri,
value |= R_CPACR_ASEDIS_MASK;
}
- /* VFPv3 and upwards with NEON implement 32 double precision
+ /*
+ * VFPv3 and upwards with NEON implement 32 double precision
* registers (D0-D31).
*/
if (!cpu_isar_feature(aa32_simd_r32, env_archcpu(env))) {
@@ -790,7 +809,8 @@ static uint64_t cpacr_read(CPUARMState *env, const ARMCPRegInfo *ri)
static void cpacr_reset(CPUARMState *env, const ARMCPRegInfo *ri)
{
- /* Call cpacr_write() so that we reset with the correct RAO bits set
+ /*
+ * Call cpacr_write() so that we reset with the correct RAO bits set
* for our CPU features.
*/
cpacr_write(env, ri, 0);
@@ -831,7 +851,8 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
{ .name = "MVA_prefetch",
.cp = 15, .crn = 7, .crm = 13, .opc1 = 0, .opc2 = 1,
.access = PL1_W, .type = ARM_CP_NOP },
- /* We need to break the TB after ISB to execute self-modifying code
+ /*
+ * We need to break the TB after ISB to execute self-modifying code
* correctly and also to take any pending interrupts immediately.
* So use arm_cp_write_ignore() function instead of ARM_CP_NOP flag.
*/
@@ -846,7 +867,8 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifar_s),
offsetof(CPUARMState, cp15.ifar_ns) },
.resetvalue = 0, },
- /* Watchpoint Fault Address Register : should actually only be present
+ /*
+ * Watchpoint Fault Address Register : should actually only be present
* for 1136, 1176, 11MPCore.
*/
{ .name = "WFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1,
@@ -1051,7 +1073,8 @@ static bool event_supported(uint16_t number)
static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri,
bool isread)
{
- /* Performance monitor registers user accessibility is controlled
+ /*
+ * Performance monitor registers user accessibility is controlled
* by PMUSERENR. MDCR_EL2.TPM and MDCR_EL3.TPM allow configurable
* trapping to EL2 or EL3 for other accesses.
*/
@@ -1139,7 +1162,8 @@ static CPAccessResult pmreg_access_ccntr(CPUARMState *env,
(MDCR_HPME | MDCR_HPMD | MDCR_HPMN | MDCR_HCCD | MDCR_HLP)
#define MDCR_EL3_PMU_ENABLE_BITS (MDCR_SPME | MDCR_SCCD)
-/* Returns true if the counter (pass 31 for PMCCNTR) should count events using
+/*
+ * Returns true if the counter (pass 31 for PMCCNTR) should count events using
* the current EL, security state, and register configuration.
*/
static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)
@@ -1503,7 +1527,8 @@ static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri)
static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- /* The value of PMSELR.SEL affects the behavior of PMXEVTYPER and
+ /*
+ * The value of PMSELR.SEL affects the behavior of PMXEVTYPER and
* PMXEVCNTR. We allow [0..31] to be written to PMSELR here; in the
* meanwhile, we check PMSELR.SEL when PMXEVTYPER and PMXEVCNTR are
* accessed.
@@ -1614,7 +1639,8 @@ static void pmevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri,
env->cp15.c14_pmevtyper[counter] = value & PMXEVTYPER_MASK;
pmevcntr_op_finish(env, counter);
}
- /* Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when
+ /*
+ * Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when
* PMSELR value is equal to or greater than the number of implemented
* counters, but not equal to 0x1f. We opt to behave as a RAZ/WI.
*/
@@ -1715,8 +1741,10 @@ static uint64_t pmevcntr_read(CPUARMState *env, const ARMCPRegInfo *ri,
}
return ret;
} else {
- /* We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR
- * are CONSTRAINED UNPREDICTABLE. */
+ /*
+ * We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR
+ * are CONSTRAINED UNPREDICTABLE.
+ */
return 0;
}
}
@@ -1791,7 +1819,8 @@ static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void vbar_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- /* Note that even though the AArch64 view of this register has bits
+ /*
+ * Note that even though the AArch64 view of this register has bits
* [10:0] all RES0 we can only mask the bottom 5, to comply with the
* architectural requirements for bits which are RES0 only in some
* contexts. (ARMv8 would permit us to do no masking at all, but ARMv7
@@ -1854,7 +1883,8 @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
if (!arm_feature(env, ARM_FEATURE_EL2)) {
valid_mask &= ~SCR_HCE;
- /* On ARMv7, SMD (or SCD as it is called in v7) is only
+ /*
+ * On ARMv7, SMD (or SCD as it is called in v7) is only
* supported if EL2 exists. The bit is UNK/SBZP when
* EL2 is unavailable. In QEMU ARMv7, we force it to always zero
* when EL2 is unavailable.
@@ -1911,7 +1941,8 @@ static uint64_t ccsidr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
ARMCPU *cpu = env_archcpu(env);
- /* Acquire the CSSELR index from the bank corresponding to the CCSIDR
+ /*
+ * Acquire the CSSELR index from the bank corresponding to the CCSIDR
* bank
*/
uint32_t index = A32_BANKED_REG_GET(env, csselr,
@@ -1986,7 +2017,8 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
/* the old v6 WFI, UNPREDICTABLE in v7 but we choose to NOP */
{ .name = "NOP", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4,
.access = PL1_W, .type = ARM_CP_NOP },
- /* Performance monitors are implementation defined in v7,
+ /*
+ * Performance monitors are implementation defined in v7,
* but with an ARM recommended set of registers, which we
* follow.
*
@@ -2140,7 +2172,8 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
.writefn = csselr_write, .resetvalue = 0,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.csselr_s),
offsetof(CPUARMState, cp15.csselr_ns) } },
- /* Auxiliary ID register: this actually has an IMPDEF value but for now
+ /*
+ * Auxiliary ID register: this actually has an IMPDEF value but for now
* just RAZ for all cores:
*/
{ .name = "AIDR", .state = ARM_CP_STATE_BOTH,
@@ -2148,7 +2181,8 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
.access = PL1_R, .type = ARM_CP_CONST,
.accessfn = access_aa64_tid1,
.resetvalue = 0 },
- /* Auxiliary fault status registers: these also are IMPDEF, and we
+ /*
+ * Auxiliary fault status registers: these also are IMPDEF, and we
* choose to RAZ/WI for all cores.
*/
{ .name = "AFSR0_EL1", .state = ARM_CP_STATE_BOTH,
@@ -2159,7 +2193,8 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
.opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1,
.access = PL1_RW, .accessfn = access_tvm_trvm,
.type = ARM_CP_CONST, .resetvalue = 0 },
- /* MAIR can just read-as-written because we don't implement caches
+ /*
+ * MAIR can just read-as-written because we don't implement caches
* and so don't need to care about memory attributes.
*/
{ .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64,
@@ -2171,10 +2206,12 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
.opc0 = 3, .opc1 = 6, .crn = 10, .crm = 2, .opc2 = 0,
.access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[3]),
.resetvalue = 0 },
- /* For non-long-descriptor page tables these are PRRR and NMRR;
+ /*
+ * For non-long-descriptor page tables these are PRRR and NMRR;
* regardless they still act as reads-as-written for QEMU.
*/
- /* MAIR0/1 are defined separately from their 64-bit counterpart which
+ /*
+ * MAIR0/1 are defined separately from their 64-bit counterpart which
* allows them to assign the correct fieldoffset based on the endianness
* handled in the field definitions.
*/
@@ -2337,7 +2374,8 @@ static const ARMCPRegInfo v6k_cp_reginfo[] = {
static CPAccessResult gt_cntfrq_access(CPUARMState *env, const ARMCPRegInfo *ri,
bool isread)
{
- /* CNTFRQ: not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero.
+ /*
+ * CNTFRQ: not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero.
* Writable only at the highest implemented exception level.
*/
int el = arm_current_el(env);
@@ -2496,7 +2534,8 @@ static CPAccessResult gt_stimer_access(CPUARMState *env,
const ARMCPRegInfo *ri,
bool isread)
{
- /* The AArch64 register view of the secure physical timer is
+ /*
+ * The AArch64 register view of the secure physical timer is
* always accessible from EL3, and configurably accessible from
* Secure EL1.
*/
@@ -2531,7 +2570,8 @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx)
ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx];
if (gt->ctl & 1) {
- /* Timer enabled: calculate and set current ISTATUS, irq, and
+ /*
+ * Timer enabled: calculate and set current ISTATUS, irq, and
* reset timer to when ISTATUS next has to change
*/
uint64_t offset = timeridx == GTIMER_VIRT ?
@@ -2554,7 +2594,8 @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx)
/* Next transition is when we hit cval */
nexttick = gt->cval + offset;
}
- /* Note that the desired next expiry time might be beyond the
+ /*
+ * Note that the desired next expiry time might be beyond the
* signed-64-bit range of a QEMUTimer -- in this case we just
* set the timer for as far in the future as possible. When the
* timer expires we will reset the timer for any remaining period.
@@ -2671,7 +2712,8 @@ static void gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
/* Enable toggled */
gt_recalc_timer(cpu, timeridx);
} else if ((oldval ^ value) & 2) {
- /* IMASK toggled: don't need to recalculate,
+ /*
+ * IMASK toggled: don't need to recalculate,
* just set the interrupt line based on ISTATUS
*/
int irqstate = (oldval & 4) && !(value & 2);
@@ -2982,7 +3024,8 @@ static void arm_gt_cntfrq_reset(CPUARMState *env, const ARMCPRegInfo *opaque)
}
static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
- /* Note that CNTFRQ is purely reads-as-written for the benefit
+ /*
+ * Note that CNTFRQ is purely reads-as-written for the benefit
* of software; writing it doesn't actually change the timer frequency.
* Our reset value matches the fixed frequency we implement the timer at.
*/
@@ -3145,7 +3188,8 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
.readfn = gt_virt_redir_cval_read, .raw_readfn = raw_read,
.writefn = gt_virt_redir_cval_write, .raw_writefn = raw_write,
},
- /* Secure timer -- this is actually restricted to only EL3
+ /*
+ * Secure timer -- this is actually restricted to only EL3
* and configurably Secure-EL1 via the accessfn.
*/
{ .name = "CNTPS_TVAL_EL1", .state = ARM_CP_STATE_AA64,
@@ -3184,7 +3228,8 @@ static CPAccessResult e2h_access(CPUARMState *env, const ARMCPRegInfo *ri,
#else
-/* In user-mode most of the generic timer registers are inaccessible
+/*
+ * In user-mode most of the generic timer registers are inaccessible
* however modern kernels (4.12+) allow access to cntvct_el0
*/
@@ -3192,7 +3237,8 @@ static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
ARMCPU *cpu = env_archcpu(env);
- /* Currently we have no support for QEMUTimer in linux-user so we
+ /*
+ * Currently we have no support for QEMUTimer in linux-user so we
* can't call gt_get_countervalue(env), instead we directly
* call the lower level functions.
*/
@@ -3233,7 +3279,8 @@ static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri,
bool isread)
{
if (ri->opc2 & 4) {
- /* The ATS12NSO* operations must trap to EL3 or EL2 if executed in
+ /*
+ * The ATS12NSO* operations must trap to EL3 or EL2 if executed in
* Secure EL1 (which can only happen if EL3 is AArch64).
* They are simply UNDEF if executed from NS EL1.
* They function normally from EL2 or EL3.
@@ -3394,7 +3441,8 @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value,
}
}
} else {
- /* fsr is a DFSR/IFSR value for the short descriptor
+ /*
+ * fsr is a DFSR/IFSR value for the short descriptor
* translation table format (with WnR always clear).
* Convert it to a 32-bit PAR.
*/
@@ -3899,7 +3947,8 @@ static const ARMCPRegInfo pmsav8r_cp_reginfo[] = {
};
static const ARMCPRegInfo pmsav7_cp_reginfo[] = {
- /* Reset for all these registers is handled in arm_cpu_reset(),
+ /*
+ * Reset for all these registers is handled in arm_cpu_reset(),
* because the PMSAv7 is also used by M-profile CPUs, which do
* not register cpregs but still need the state to be reset.
*/
@@ -4000,7 +4049,8 @@ static void vmsa_ttbcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
}
if (arm_feature(env, ARM_FEATURE_LPAE)) {
- /* With LPAE the TTBCR could result in a change of ASID
+ /*
+ * With LPAE the TTBCR could result in a change of ASID
* via the TTBCR.A1 bit, so do a TLB flush.
*/
tlb_flush(CPU(cpu));
@@ -4117,7 +4167,8 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
offsetoflow32(CPUARMState, cp15.tcr_el[1])} },
};
-/* Note that unlike TTBCR, writing to TTBCR2 does not require flushing
+/*
+ * Note that unlike TTBCR, writing to TTBCR2 does not require flushing
* qemu tlbs nor adjusting cached masks.
*/
static const ARMCPRegInfo ttbcr2_reginfo = {
@@ -4155,7 +4206,8 @@ static void omap_wfi_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void omap_cachemaint_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- /* On OMAP there are registers indicating the max/min index of dcache lines
+ /*
+ * On OMAP there are registers indicating the max/min index of dcache lines
* containing a dirty line; cache flush operations have to reset these.
*/
env->cp15.c15_i_max = 0x000;
@@ -4187,7 +4239,8 @@ static const ARMCPRegInfo omap_cp_reginfo[] = {
.crm = 8, .opc1 = 0, .opc2 = 0, .access = PL1_RW,
.type = ARM_CP_NO_RAW,
.readfn = arm_cp_read_zero, .writefn = omap_wfi_write, },
- /* TODO: Peripheral port remap register:
+ /*
+ * TODO: Peripheral port remap register:
* On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt controller
* base address at $rn & ~0xfff and map size of 0x200 << ($rn & 0xfff),
* when MMU is off.
@@ -4216,7 +4269,8 @@ static const ARMCPRegInfo xscale_cp_reginfo[] = {
.cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1, .access = PL1_RW,
.fieldoffset = offsetof(CPUARMState, cp15.c1_xscaleauxcr),
.resetvalue = 0, },
- /* XScale specific cache-lockdown: since we have no cache we NOP these
+ /*
+ * XScale specific cache-lockdown: since we have no cache we NOP these
* and hope the guest does not really rely on cache behaviour.
*/
{ .name = "XSCALE_LOCK_ICACHE_LINE",
@@ -4234,7 +4288,8 @@ static const ARMCPRegInfo xscale_cp_reginfo[] = {
};
static const ARMCPRegInfo dummy_c15_cp_reginfo[] = {
- /* RAZ/WI the whole crn=15 space, when we don't have a more specific
+ /*
+ * RAZ/WI the whole crn=15 space, when we don't have a more specific
* implementation of this implementation-defined space.
* Ideally this should eventually disappear in favour of actually
* implementing the correct behaviour for all cores.
@@ -4274,7 +4329,8 @@ static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = {
};
static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = {
- /* The cache test-and-clean instructions always return (1 << 30)
+ /*
+ * The cache test-and-clean instructions always return (1 << 30)
* to indicate that there are no dirty cache lines.
*/
{ .name = "TC_DCACHE", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 3,
@@ -4310,7 +4366,8 @@ static uint64_t mpidr_read_val(CPUARMState *env)
if (arm_feature(env, ARM_FEATURE_V7MP)) {
mpidr |= (1U << 31);
- /* Cores which are uniprocessor (non-coherent)
+ /*
+ * Cores which are uniprocessor (non-coherent)
* but still implement the MP extensions set
* bit 30. (For instance, Cortex-R5).
*/
@@ -4522,7 +4579,8 @@ static CPAccessResult access_tocu(CPUARMState *env, const ARMCPRegInfo *ri,
return do_cacheop_pou_access(env, HCR_TOCU | HCR_TPU);
}
-/* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions
+/*
+ * See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions
* Page D4-1736 (DDI0487A.b)
*/
@@ -4655,7 +4713,8 @@ static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- /* Invalidate by VA, EL2
+ /*
+ * Invalidate by VA, EL2
* Currently handles both VAE2 and VALE2, since we don't support
* flush-last-level-only.
*/
@@ -4669,7 +4728,8 @@ static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- /* Invalidate by VA, EL3
+ /*
+ * Invalidate by VA, EL3
* Currently handles both VAE3 and VALE3, since we don't support
* flush-last-level-only.
*/
@@ -4694,7 +4754,8 @@ static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- /* Invalidate by VA, EL1&0 (AArch64 version).
+ /*
+ * Invalidate by VA, EL1&0 (AArch64 version).
* Currently handles all of VAE1, VAAE1, VAALE1 and VALE1,
* since we don't support flush-for-specific-ASID-only or
* flush-last-level-only.
@@ -5015,7 +5076,8 @@ static CPAccessResult sp_el0_access(CPUARMState *env, const ARMCPRegInfo *ri,
bool isread)
{
if (!(env->pstate & PSTATE_SP)) {
- /* Access to SP_EL0 is undefined if it's being used as
+ /*
+ * Access to SP_EL0 is undefined if it's being used as
* the stack pointer.
*/
return CP_ACCESS_TRAP_UNCATEGORIZED;
@@ -5055,7 +5117,8 @@ static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri,
}
if (raw_read(env, ri) == value) {
- /* Skip the TLB flush if nothing actually changed; Linux likes
+ /*
+ * Skip the TLB flush if nothing actually changed; Linux likes
* to do a lot of pointless SCTLR writes.
*/
return;
@@ -5123,7 +5186,8 @@ static void mdcr_el2_write(CPUARMState *env, const ARMCPRegInfo *ri,
}
static const ARMCPRegInfo v8_cp_reginfo[] = {
- /* Minimal set of EL0-visible registers. This will need to be expanded
+ /*
+ * Minimal set of EL0-visible registers. This will need to be expanded
* significantly for system emulation of AArch64 CPUs.
*/
{ .name = "NZCV", .state = ARM_CP_STATE_AA64,
@@ -5406,7 +5470,8 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 0,
.access = PL1_RW,
.fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_SVC]) },
- /* We rely on the access checks not allowing the guest to write to the
+ /*
+ * We rely on the access checks not allowing the guest to write to the
* state field when SPSel indicates that it's being used as the stack
* pointer.
*/
@@ -5484,7 +5549,8 @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask)
if (arm_feature(env, ARM_FEATURE_EL3)) {
valid_mask &= ~HCR_HCD;
} else if (cpu->psci_conduit != QEMU_PSCI_CONDUIT_SMC) {
- /* Architecturally HCR.TSC is RES0 if EL3 is not implemented.
+ /*
+ * Architecturally HCR.TSC is RES0 if EL3 is not implemented.
* However, if we're using the SMC PSCI conduit then QEMU is
* effectively acting like EL3 firmware and so the guest at
* EL2 should retain the ability to prevent EL1 from being
@@ -5914,7 +5980,8 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
.writefn = tlbi_aa64_vae2is_write },
#ifndef CONFIG_USER_ONLY
- /* Unlike the other EL2-related AT operations, these must
+ /*
+ * Unlike the other EL2-related AT operations, these must
* UNDEF from EL3 if EL2 is not implemented, which is why we
* define them here rather than with the rest of the AT ops.
*/
@@ -5928,7 +5995,8 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.access = PL2_W, .accessfn = at_s1e2_access,
.type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF,
.writefn = ats_write64 },
- /* The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE
+ /*
+ * The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE
* if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3
* with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose
* to behave as if SCR.NS was 1.
@@ -5941,7 +6009,8 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.writefn = ats1h_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC },
{ .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0,
- /* ARMv7 requires bit 0 and 1 to reset to 1. ARMv8 defines the
+ /*
+ * ARMv7 requires bit 0 and 1 to reset to 1. ARMv8 defines the
* reset values as IMPDEF. We choose to reset to 3 to comply with
* both ARMv7 and ARMv8.
*/
@@ -6024,7 +6093,8 @@ static const ARMCPRegInfo el2_sec_cp_reginfo[] = {
static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri,
bool isread)
{
- /* The NSACR is RW at EL3, and RO for NS EL1 and NS EL2.
+ /*
+ * The NSACR is RW at EL3, and RO for NS EL1 and NS EL2.
* At Secure EL1 it traps to EL3 or EL2.
*/
if (arm_current_el(env) == 3) {
@@ -6828,7 +6898,8 @@ static void define_pmu_regs(ARMCPU *cpu)
}
}
-/* We don't know until after realize whether there's a GICv3
+/*
+ * We don't know until after realize whether there's a GICv3
* attached, and that is what registers the gicv3 sysregs.
* So we have to fill in the GIC fields in ID_PFR/ID_PFR1_EL1/ID_AA64PFR0_EL1
* at runtime.
@@ -6857,7 +6928,8 @@ static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri)
}
#endif
-/* Shared logic between LORID and the rest of the LOR* registers.
+/*
+ * Shared logic between LORID and the rest of the LOR* registers.
* Secure state exclusion has already been dealt with.
*/
static CPAccessResult access_lor_ns(CPUARMState *env,
@@ -7684,7 +7756,8 @@ void register_cp_regs_for_features(ARMCPU *cpu)
define_arm_cp_regs(cpu, cp_reginfo);
if (!arm_feature(env, ARM_FEATURE_V8)) {
- /* Must go early as it is full of wildcards that may be
+ /*
+ * Must go early as it is full of wildcards that may be
* overridden by later definitions.
*/
define_arm_cp_regs(cpu, not_v8_cp_reginfo);
@@ -7698,7 +7771,8 @@ void register_cp_regs_for_features(ARMCPU *cpu)
.access = PL1_R, .type = ARM_CP_CONST,
.accessfn = access_aa32_tid3,
.resetvalue = cpu->isar.id_pfr0 },
- /* ID_PFR1 is not a plain ARM_CP_CONST because we don't know
+ /*
+ * ID_PFR1 is not a plain ARM_CP_CONST because we don't know
* the value of the GIC field until after we define these regs.
*/
{ .name = "ID_PFR1", .state = ARM_CP_STATE_BOTH,
@@ -8239,7 +8313,8 @@ void register_cp_regs_for_features(ARMCPU *cpu)
define_arm_cp_regs(cpu, el3_regs);
}
- /* The behaviour of NSACR is sufficiently various that we don't
+ /*
+ * The behaviour of NSACR is sufficiently various that we don't
* try to describe it in a single reginfo:
* if EL3 is 64 bit, then trap to EL3 from S EL1,
* reads as constant 0xc00 from NS EL1 and NS EL2
@@ -8331,13 +8406,15 @@ void register_cp_regs_for_features(ARMCPU *cpu)
if (cpu_isar_feature(aa32_jazelle, cpu)) {
define_arm_cp_regs(cpu, jazelle_regs);
}
- /* Slightly awkwardly, the OMAP and StrongARM cores need all of
+ /*
+ * Slightly awkwardly, the OMAP and StrongARM cores need all of
* cp15 crn=0 to be writes-ignored, whereas for other cores they should
* be read-only (ie write causes UNDEF exception).
*/
{
ARMCPRegInfo id_pre_v8_midr_cp_reginfo[] = {
- /* Pre-v8 MIDR space.
+ /*
+ * Pre-v8 MIDR space.
* Note that the MIDR isn't a simple constant register because
* of the TI925 behaviour where writes to another register can
* cause the MIDR value to change.
@@ -8446,7 +8523,8 @@ void register_cp_regs_for_features(ARMCPU *cpu)
if (arm_feature(env, ARM_FEATURE_OMAPCP) ||
arm_feature(env, ARM_FEATURE_STRONGARM)) {
size_t i;
- /* Register the blanket "writes ignored" value first to cover the
+ /*
+ * Register the blanket "writes ignored" value first to cover the
* whole space. Then update the specific ID registers to allow write
* access, so that they ignore writes rather than causing them to
* UNDEF.
@@ -8654,7 +8732,8 @@ void register_cp_regs_for_features(ARMCPU *cpu)
.raw_writefn = raw_write,
};
if (arm_feature(env, ARM_FEATURE_XSCALE)) {
- /* Normally we would always end the TB on an SCTLR write, but Linux
+ /*
+ * Normally we would always end the TB on an SCTLR write, but Linux
* arch/arm/mach-pxa/sleep.S expects two instructions following
* an MMU enable to execute from cache. Imitate this behaviour.
*/
@@ -9060,7 +9139,8 @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
const ARMCPRegInfo *r, void *opaque)
{
- /* Define implementations of coprocessor registers.
+ /*
+ * Define implementations of coprocessor registers.
* We store these in a hashtable because typically
* there are less than 150 registers in a space which
* is 16*16*16*8*8 = 262144 in size.
@@ -9127,7 +9207,8 @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
default:
g_assert_not_reached();
}
- /* The AArch64 pseudocode CheckSystemAccess() specifies that op1
+ /*
+ * The AArch64 pseudocode CheckSystemAccess() specifies that op1
* encodes a minimum access level for the register. We roll this
* runtime check into our general permission check code, so check
* here that the reginfo's specified permissions are strict enough
@@ -9169,7 +9250,8 @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
assert((r->access & ~mask) == 0);
}
- /* Check that the register definition has enough info to handle
+ /*
+ * Check that the register definition has enough info to handle
* reads and writes if they are permitted.
*/
if (!(r->type & (ARM_CP_SPECIAL_MASK | ARM_CP_CONST))) {
@@ -9194,7 +9276,8 @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
continue;
}
if (state == ARM_CP_STATE_AA32) {
- /* Under AArch32 CP registers can be common
+ /*
+ * Under AArch32 CP registers can be common
* (same for secure and non-secure world) or banked.
*/
char *name;
@@ -9220,8 +9303,10 @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
g_assert_not_reached();
}
} else {
- /* AArch64 registers get mapped to non-secure instance
- * of AArch32 */
+ /*
+ * AArch64 registers get mapped to non-secure instance
+ * of AArch32
+ */
add_cpreg_to_hashtable(cpu, r, opaque, state,
ARM_CP_SECSTATE_NS,
crm, opc1, opc2, r->name);
@@ -9307,7 +9392,8 @@ void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque)
static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type)
{
- /* Return true if it is not valid for us to switch to
+ /*
+ * Return true if it is not valid for us to switch to
* this CPU mode (ie all the UNPREDICTABLE cases in
* the ARM ARM CPSRWriteByInstr pseudocode).
*/
@@ -9328,10 +9414,12 @@ static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type)
case ARM_CPU_MODE_UND:
case ARM_CPU_MODE_IRQ:
case ARM_CPU_MODE_FIQ:
- /* Note that we don't implement the IMPDEF NSACR.RFR which in v7
+ /*
+ * Note that we don't implement the IMPDEF NSACR.RFR which in v7
* allows FIQ mode to be Secure-only. (In v8 this doesn't exist.)
*/
- /* If HCR.TGE is set then changes from Monitor to NS PL1 via MSR
+ /*
+ * If HCR.TGE is set then changes from Monitor to NS PL1 via MSR
* and CPS are treated as illegal mode changes.
*/
if (write_type == CPSRWriteByInstr &&
@@ -9389,7 +9477,8 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
env->GE = (val >> 16) & 0xf;
}
- /* In a V7 implementation that includes the security extensions but does
+ /*
+ * In a V7 implementation that includes the security extensions but does
* not include Virtualization Extensions the SCR.FW and SCR.AW bits control
* whether non-secure software is allowed to change the CPSR_F and CPSR_A
* bits respectively.
@@ -9405,7 +9494,8 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
changed_daif = (env->daif ^ val) & mask;
if (changed_daif & CPSR_A) {
- /* Check to see if we are allowed to change the masking of async
+ /*
+ * Check to see if we are allowed to change the masking of async
* abort exceptions from a non-secure state.
*/
if (!(env->cp15.scr_el3 & SCR_AW)) {
@@ -9417,7 +9507,8 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
}
if (changed_daif & CPSR_F) {
- /* Check to see if we are allowed to change the masking of FIQ
+ /*
+ * Check to see if we are allowed to change the masking of FIQ
* exceptions from a non-secure state.
*/
if (!(env->cp15.scr_el3 & SCR_FW)) {
@@ -9427,7 +9518,8 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
mask &= ~CPSR_F;
}
- /* Check whether non-maskable FIQ (NMFI) support is enabled.
+ /*
+ * Check whether non-maskable FIQ (NMFI) support is enabled.
* If this bit is set software is not allowed to mask
* FIQs, but is allowed to set CPSR_F to 0.
*/
@@ -9447,7 +9539,8 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
if (write_type != CPSRWriteRaw &&
((env->uncached_cpsr ^ val) & mask & CPSR_M)) {
if ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_USR) {
- /* Note that we can only get here in USR mode if this is a
+ /*
+ * Note that we can only get here in USR mode if this is a
* gdb stub write; for this case we follow the architectural
* behaviour for guest writes in USR mode of ignoring an attempt
* to switch mode. (Those are caught by translate.c for writes
@@ -9455,7 +9548,8 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
*/
mask &= ~CPSR_M;
} else if (bad_mode_switch(env, val & CPSR_M, write_type)) {
- /* Attempt to switch to an invalid mode: this is UNPREDICTABLE in
+ /*
+ * Attempt to switch to an invalid mode: this is UNPREDICTABLE in
* v7, and has defined behaviour in v8:
* + leave CPSR.M untouched
* + allow changes to the other CPSR fields
@@ -9598,7 +9692,8 @@ static void switch_mode(CPUARMState *env, int mode)
env->regs[14] = env->banked_r14[r14_bank_number(mode)];
}
-/* Physical Interrupt Target EL Lookup Table
+/*
+ * Physical Interrupt Target EL Lookup Table
*
* [ From ARM ARM section G1.13.4 (Table G1-15) ]
*
@@ -9672,7 +9767,8 @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
if (arm_feature(env, ARM_FEATURE_EL3)) {
rw = ((env->cp15.scr_el3 & SCR_RW) == SCR_RW);
} else {
- /* Either EL2 is the highest EL (and so the EL2 register width
+ /*
+ * Either EL2 is the highest EL (and so the EL2 register width
* is given by is64); or there is no EL2 or EL3, in which case
* the value of 'rw' does not affect the table lookup anyway.
*/
@@ -9947,7 +10043,8 @@ void aarch64_sync_64_to_32(CPUARMState *env)
env->banked_r13[bank_number(ARM_CPU_MODE_UND)] = env->xregs[23];
}
- /* Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ
+ /*
+ * Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ
* mode, then we can copy to r8-r14. Otherwise, we copy to the
* FIQ bank for r8-r14.
*/
@@ -10293,7 +10390,8 @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs)
/* High vectors. When enabled, base address cannot be remapped. */
addr += 0xffff0000;
} else {
- /* ARM v7 architectures provide a vector base address register to remap
+ /*
+ * ARM v7 architectures provide a vector base address register to remap
* the interrupt vector table.
* This register is only followed in non-monitor mode, and is banked.
* Note: only bits 31:5 are valid.
@@ -10427,7 +10525,8 @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs)
aarch64_sve_change_el(env, cur_el, new_el, is_a64(env));
if (cur_el < new_el) {
- /* Entry vector offset depends on whether the implemented EL
+ /*
+ * Entry vector offset depends on whether the implemented EL
* immediately lower than the target level is using AArch32 or AArch64
*/
bool is_aa64;
@@ -10628,7 +10727,8 @@ static void handle_semihosting(CPUState *cs)
}
#endif
-/* Handle a CPU exception for A and R profile CPUs.
+/*
+ * Handle a CPU exception for A and R profile CPUs.
* Do any appropriate logging, handle PSCI calls, and then hand off
* to the AArch64-entry or AArch32-entry function depending on the
* target exception level's register width.
@@ -10673,7 +10773,8 @@ void arm_cpu_do_interrupt(CPUState *cs)
}
#endif
- /* Hooks may change global state so BQL should be held, also the
+ /*
+ * Hooks may change global state so BQL should be held, also the
* BQL needs to be held for any modification of
* cs->interrupt_request.
*/
@@ -10954,9 +11055,11 @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
};
}
-/* Note that signed overflow is undefined in C. The following routines are
- careful to use unsigned types where modulo arithmetic is required.
- Failure to do so _will_ break on newer gcc. */
+/*
+ * Note that signed overflow is undefined in C. The following routines are
+ * careful to use unsigned types where modulo arithmetic is required.
+ * Failure to do so _will_ break on newer gcc.
+ */
/* Signed saturating arithmetic. */
@@ -11198,7 +11301,8 @@ uint32_t HELPER(sel_flags)(uint32_t flags, uint32_t a, uint32_t b)
return (a & mask) | (b & ~mask);
}
-/* CRC helpers.
+/*
+ * CRC helpers.
* The upper bytes of val (above the number specified by 'bytes') must have
* been zeroed out by the caller.
*/
@@ -11222,7 +11326,8 @@ uint32_t HELPER(crc32c)(uint32_t acc, uint32_t val, uint32_t bytes)
return crc32c(acc, buf, bytes) ^ 0xffffffff;
}
-/* Return the exception level to which FP-disabled exceptions should
+/*
+ * Return the exception level to which FP-disabled exceptions should
* be taken, or 0 if FP is enabled.
*/
int fp_exception_el(CPUARMState *env, int cur_el)
@@ -11230,7 +11335,8 @@ int fp_exception_el(CPUARMState *env, int cur_el)
#ifndef CONFIG_USER_ONLY
uint64_t hcr_el2;
- /* CPACR and the CPTR registers don't exist before v6, so FP is
+ /*
+ * CPACR and the CPTR registers don't exist before v6, so FP is
* always accessible
*/
if (!arm_feature(env, ARM_FEATURE_V6)) {
@@ -11255,7 +11361,8 @@ int fp_exception_el(CPUARMState *env, int cur_el)
hcr_el2 = arm_hcr_el2_eff(env);
- /* The CPACR controls traps to EL1, or PL1 if we're 32 bit:
+ /*
+ * The CPACR controls traps to EL1, or PL1 if we're 32 bit:
* 0, 2 : trap EL0 and EL1/PL1 accesses
* 1 : trap only EL0 accesses
* 3 : trap no accesses
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 19/34] target/arm: Fix checkpatch space errors in helper.c
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (17 preceding siblings ...)
2023-01-05 16:44 ` [PULL 18/34] target/arm: Fix checkpatch comment style warnings in helper.c Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 20/34] target/arm: Fix checkpatch brace " Peter Maydell
` (15 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Fabiano Rosas <farosas@suse.de>
Fix the following:
ERROR: spaces required around that '|' (ctx:VxV)
ERROR: space required before the open parenthesis '('
ERROR: spaces required around that '+' (ctx:VxB)
ERROR: space prohibited between function name and open parenthesis '('
(the last two still have some occurrences in macros which I left
behind because it might impact readability)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper.c | 42 +++++++++++++++++++++---------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index a5f96ab77dd..8f1cc2d7cfb 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -205,7 +205,7 @@ static void add_cpreg_to_list(gpointer key, gpointer opaque)
uint32_t regidx = (uintptr_t)key;
const ARMCPRegInfo *ri = get_arm_cp_reginfo(cpu->cp_regs, regidx);
- if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) {
+ if (!(ri->type & (ARM_CP_NO_RAW | ARM_CP_ALIAS))) {
cpu->cpreg_indexes[cpu->cpreg_array_len] = cpreg_to_kvm_id(regidx);
/* The value array need not be initialized at this point */
cpu->cpreg_array_len++;
@@ -219,7 +219,7 @@ static void count_cpreg(gpointer key, gpointer opaque)
ri = g_hash_table_lookup(cpu->cp_regs, key);
- if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) {
+ if (!(ri->type & (ARM_CP_NO_RAW | ARM_CP_ALIAS))) {
cpu->cpreg_array_len++;
}
}
@@ -2350,11 +2350,11 @@ static const ARMCPRegInfo v6k_cp_reginfo[] = {
.resetfn = arm_cp_reset_ignore },
{ .name = "TPIDRRO_EL0", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 3, .opc2 = 3, .crn = 13, .crm = 0,
- .access = PL0_R|PL1_W,
+ .access = PL0_R | PL1_W,
.fieldoffset = offsetof(CPUARMState, cp15.tpidrro_el[0]),
.resetvalue = 0},
{ .name = "TPIDRURO", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 3,
- .access = PL0_R|PL1_W,
+ .access = PL0_R | PL1_W,
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidruro_s),
offsetoflow32(CPUARMState, cp15.tpidruro_ns) },
.resetfn = arm_cp_reset_ignore },
@@ -4315,17 +4315,17 @@ static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = {
.resetvalue = 0 },
/* The cache ops themselves: these all NOP for QEMU */
{ .name = "IICR", .cp = 15, .crm = 5, .opc1 = 0,
- .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+ .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT },
{ .name = "IDCR", .cp = 15, .crm = 6, .opc1 = 0,
- .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+ .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT },
{ .name = "CDCR", .cp = 15, .crm = 12, .opc1 = 0,
- .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+ .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT },
{ .name = "PIR", .cp = 15, .crm = 12, .opc1 = 1,
- .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+ .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT },
{ .name = "PDR", .cp = 15, .crm = 12, .opc1 = 2,
- .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+ .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT },
{ .name = "CIDCR", .cp = 15, .crm = 14, .opc1 = 0,
- .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+ .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT },
};
static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = {
@@ -8695,7 +8695,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
ARMCPRegInfo cbar = {
.name = "CBAR",
.cp = 15, .crn = 15, .crm = 0, .opc1 = 4, .opc2 = 0,
- .access = PL1_R|PL3_W, .resetvalue = cpu->reset_cbar,
+ .access = PL1_R | PL3_W, .resetvalue = cpu->reset_cbar,
.fieldoffset = offsetof(CPUARMState,
cp15.c15_config_base_address)
};
@@ -9673,11 +9673,11 @@ static void switch_mode(CPUARMState *env, int mode)
return;
if (old_mode == ARM_CPU_MODE_FIQ) {
- memcpy (env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t));
- memcpy (env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t));
+ memcpy(env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t));
+ memcpy(env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t));
} else if (mode == ARM_CPU_MODE_FIQ) {
- memcpy (env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t));
- memcpy (env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t));
+ memcpy(env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t));
+ memcpy(env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t));
}
i = bank_number(old_mode);
@@ -11181,7 +11181,7 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
RESULT(sum, n, 16); \
if (sum >= 0) \
ge |= 3 << (n * 2); \
- } while(0)
+ } while (0)
#define SARITH8(a, b, n, op) do { \
int32_t sum; \
@@ -11189,7 +11189,7 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
RESULT(sum, n, 8); \
if (sum >= 0) \
ge |= 1 << n; \
- } while(0)
+ } while (0)
#define ADD16(a, b, n) SARITH16(a, b, n, +)
@@ -11208,7 +11208,7 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
RESULT(sum, n, 16); \
if ((sum >> 16) == 1) \
ge |= 3 << (n * 2); \
- } while(0)
+ } while (0)
#define ADD8(a, b, n) do { \
uint32_t sum; \
@@ -11216,7 +11216,7 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
RESULT(sum, n, 8); \
if ((sum >> 8) == 1) \
ge |= 1 << n; \
- } while(0)
+ } while (0)
#define SUB16(a, b, n) do { \
uint32_t sum; \
@@ -11224,7 +11224,7 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
RESULT(sum, n, 16); \
if ((sum >> 16) == 0) \
ge |= 3 << (n * 2); \
- } while(0)
+ } while (0)
#define SUB8(a, b, n) do { \
uint32_t sum; \
@@ -11232,7 +11232,7 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
RESULT(sum, n, 8); \
if ((sum >> 8) == 0) \
ge |= 1 << n; \
- } while(0)
+ } while (0)
#define PFX u
#define ARITH_GE
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 20/34] target/arm: Fix checkpatch brace errors in helper.c
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (18 preceding siblings ...)
2023-01-05 16:44 ` [PULL 19/34] target/arm: Fix checkpatch space errors " Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 21/34] target/arm: Remove unused includes from m_helper.c Peter Maydell
` (14 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Fabiano Rosas <farosas@suse.de>
Fix this:
ERROR: braces {} are necessary for all arms of this statement
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-4-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper.c | 67 ++++++++++++++++++++++++++++-----------------
1 file changed, 42 insertions(+), 25 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 8f1cc2d7cfb..5d8971aa51e 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -9461,10 +9461,12 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
env->CF = (val >> 29) & 1;
env->VF = (val << 3) & 0x80000000;
}
- if (mask & CPSR_Q)
+ if (mask & CPSR_Q) {
env->QF = ((val & CPSR_Q) != 0);
- if (mask & CPSR_T)
+ }
+ if (mask & CPSR_T) {
env->thumb = ((val & CPSR_T) != 0);
+ }
if (mask & CPSR_IT_0_1) {
env->condexec_bits &= ~3;
env->condexec_bits |= (val >> 25) & 3;
@@ -9669,8 +9671,9 @@ static void switch_mode(CPUARMState *env, int mode)
int i;
old_mode = env->uncached_cpsr & CPSR_M;
- if (mode == old_mode)
+ if (mode == old_mode) {
return;
+ }
if (old_mode == ARM_CPU_MODE_FIQ) {
memcpy(env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t));
@@ -10276,10 +10279,11 @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs)
new_mode = ARM_CPU_MODE_UND;
addr = 0x04;
mask = CPSR_I;
- if (env->thumb)
+ if (env->thumb) {
offset = 2;
- else
+ } else {
offset = 4;
+ }
break;
case EXCP_SWI:
new_mode = ARM_CPU_MODE_SVC;
@@ -11070,10 +11074,11 @@ static inline uint16_t add16_sat(uint16_t a, uint16_t b)
res = a + b;
if (((res ^ a) & 0x8000) && !((a ^ b) & 0x8000)) {
- if (a & 0x8000)
+ if (a & 0x8000) {
res = 0x8000;
- else
+ } else {
res = 0x7fff;
+ }
}
return res;
}
@@ -11085,10 +11090,11 @@ static inline uint8_t add8_sat(uint8_t a, uint8_t b)
res = a + b;
if (((res ^ a) & 0x80) && !((a ^ b) & 0x80)) {
- if (a & 0x80)
+ if (a & 0x80) {
res = 0x80;
- else
+ } else {
res = 0x7f;
+ }
}
return res;
}
@@ -11100,10 +11106,11 @@ static inline uint16_t sub16_sat(uint16_t a, uint16_t b)
res = a - b;
if (((res ^ a) & 0x8000) && ((a ^ b) & 0x8000)) {
- if (a & 0x8000)
+ if (a & 0x8000) {
res = 0x8000;
- else
+ } else {
res = 0x7fff;
+ }
}
return res;
}
@@ -11115,10 +11122,11 @@ static inline uint8_t sub8_sat(uint8_t a, uint8_t b)
res = a - b;
if (((res ^ a) & 0x80) && ((a ^ b) & 0x80)) {
- if (a & 0x80)
+ if (a & 0x80) {
res = 0x80;
- else
+ } else {
res = 0x7f;
+ }
}
return res;
}
@@ -11136,34 +11144,38 @@ static inline uint16_t add16_usat(uint16_t a, uint16_t b)
{
uint16_t res;
res = a + b;
- if (res < a)
+ if (res < a) {
res = 0xffff;
+ }
return res;
}
static inline uint16_t sub16_usat(uint16_t a, uint16_t b)
{
- if (a > b)
+ if (a > b) {
return a - b;
- else
+ } else {
return 0;
+ }
}
static inline uint8_t add8_usat(uint8_t a, uint8_t b)
{
uint8_t res;
res = a + b;
- if (res < a)
+ if (res < a) {
res = 0xff;
+ }
return res;
}
static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
{
- if (a > b)
+ if (a > b) {
return a - b;
- else
+ } else {
return 0;
+ }
}
#define ADD16(a, b, n) RESULT(add16_usat(a, b), n, 16);
@@ -11267,10 +11279,11 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
static inline uint8_t do_usad(uint8_t a, uint8_t b)
{
- if (a > b)
+ if (a > b) {
return a - b;
- else
+ } else {
return b - a;
+ }
}
/* Unsigned sum of absolute byte differences. */
@@ -11290,14 +11303,18 @@ uint32_t HELPER(sel_flags)(uint32_t flags, uint32_t a, uint32_t b)
uint32_t mask;
mask = 0;
- if (flags & 1)
+ if (flags & 1) {
mask |= 0xff;
- if (flags & 2)
+ }
+ if (flags & 2) {
mask |= 0xff00;
- if (flags & 4)
+ }
+ if (flags & 4) {
mask |= 0xff0000;
- if (flags & 8)
+ }
+ if (flags & 8) {
mask |= 0xff000000;
+ }
return (a & mask) | (b & ~mask);
}
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 21/34] target/arm: Remove unused includes from m_helper.c
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (19 preceding siblings ...)
2023-01-05 16:44 ` [PULL 20/34] target/arm: Fix checkpatch brace " Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 22/34] target/arm: Remove unused includes from helper.c Peter Maydell
` (13 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-5-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/m_helper.c | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c
index 355cd4d60a7..033a4d92614 100644
--- a/target/arm/m_helper.c
+++ b/target/arm/m_helper.c
@@ -7,30 +7,14 @@
*/
#include "qemu/osdep.h"
-#include "qemu/units.h"
-#include "target/arm/idau.h"
-#include "trace.h"
#include "cpu.h"
#include "internals.h"
-#include "exec/gdbstub.h"
#include "exec/helper-proto.h"
-#include "qemu/host-utils.h"
#include "qemu/main-loop.h"
#include "qemu/bitops.h"
-#include "qemu/crc32c.h"
-#include "qemu/qemu-print.h"
#include "qemu/log.h"
#include "exec/exec-all.h"
-#include <zlib.h> /* For crc32 */
-#include "semihosting/semihost.h"
-#include "sysemu/cpus.h"
-#include "sysemu/kvm.h"
-#include "qemu/range.h"
-#include "qapi/qapi-commands-machine-target.h"
-#include "qapi/error.h"
-#include "qemu/guest-random.h"
#ifdef CONFIG_TCG
-#include "arm_ldst.h"
#include "exec/cpu_ldst.h"
#include "semihosting/common-semi.h"
#endif
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 22/34] target/arm: Remove unused includes from helper.c
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (20 preceding siblings ...)
2023-01-05 16:44 ` [PULL 21/34] target/arm: Remove unused includes from m_helper.c Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 23/34] target/arm: cleanup cpu includes Peter Maydell
` (12 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-6-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 5d8971aa51e..d3e8e606475 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -7,13 +7,11 @@
*/
#include "qemu/osdep.h"
-#include "qemu/units.h"
#include "qemu/log.h"
#include "trace.h"
#include "cpu.h"
#include "internals.h"
#include "exec/helper-proto.h"
-#include "qemu/host-utils.h"
#include "qemu/main-loop.h"
#include "qemu/timer.h"
#include "qemu/bitops.h"
@@ -22,17 +20,12 @@
#include "exec/exec-all.h"
#include <zlib.h> /* For crc32 */
#include "hw/irq.h"
-#include "semihosting/semihost.h"
-#include "sysemu/cpus.h"
#include "sysemu/cpu-timers.h"
#include "sysemu/kvm.h"
-#include "qemu/range.h"
#include "qapi/qapi-commands-machine-target.h"
#include "qapi/error.h"
#include "qemu/guest-random.h"
#ifdef CONFIG_TCG
-#include "arm_ldst.h"
-#include "exec/cpu_ldst.h"
#include "semihosting/common-semi.h"
#endif
#include "cpregs.h"
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 23/34] target/arm: cleanup cpu includes
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (21 preceding siblings ...)
2023-01-05 16:44 ` [PULL 22/34] target/arm: Remove unused includes from helper.c Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 24/34] hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo arg Peter Maydell
` (11 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Claudio Fontana <cfontana@suse.de>
Remove some unused headers.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20221213190537.511-7-farosas@suse.de
[added back some includes that are still needed at this point]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu.c | 1 -
target/arm/cpu64.c | 6 ------
2 files changed, 7 deletions(-)
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index f99f749b295..5f63316dbf2 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -26,7 +26,6 @@
#include "target/arm/idau.h"
#include "qemu/module.h"
#include "qapi/error.h"
-#include "qapi/visitor.h"
#include "cpu.h"
#ifdef CONFIG_TCG
#include "hw/core/tcg-cpu-ops.h"
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index 2cf2ca4ce5a..0e021960fb5 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -21,13 +21,7 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "cpu.h"
-#ifdef CONFIG_TCG
-#include "hw/core/tcg-cpu-ops.h"
-#endif /* CONFIG_TCG */
#include "qemu/module.h"
-#if !defined(CONFIG_USER_ONLY)
-#include "hw/loader.h"
-#endif
#include "sysemu/kvm.h"
#include "sysemu/hvf.h"
#include "kvm_arm.h"
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 24/34] hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo arg
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (22 preceding siblings ...)
2023-01-05 16:44 ` [PULL 23/34] target/arm: cleanup cpu includes Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 25/34] hw/arm/nseries: Constify various read-only arrays Peter Maydell
` (10 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <philmd@linaro.org>
The pointed MouseTransformInfo structure is accessed read-only.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221220142520.24094-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/input/tsc2xxx.h | 4 ++--
hw/input/tsc2005.c | 2 +-
hw/input/tsc210x.c | 3 +--
3 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h
index 5b76ebc1776..00eca17674e 100644
--- a/include/hw/input/tsc2xxx.h
+++ b/include/hw/input/tsc2xxx.h
@@ -30,12 +30,12 @@ uWireSlave *tsc2102_init(qemu_irq pint);
uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav);
I2SCodec *tsc210x_codec(uWireSlave *chip);
uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len);
-void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info);
+void tsc210x_set_transform(uWireSlave *chip, const MouseTransformInfo *info);
void tsc210x_key_event(uWireSlave *chip, int key, int down);
/* tsc2005.c */
void *tsc2005_init(qemu_irq pintdav);
uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len);
-void tsc2005_set_transform(void *opaque, MouseTransformInfo *info);
+void tsc2005_set_transform(void *opaque, const MouseTransformInfo *info);
#endif
diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c
index 14698ce1097..555b6771738 100644
--- a/hw/input/tsc2005.c
+++ b/hw/input/tsc2005.c
@@ -523,7 +523,7 @@ void *tsc2005_init(qemu_irq pintdav)
* from the touchscreen. Assuming 12-bit precision was used during
* tslib calibration.
*/
-void tsc2005_set_transform(void *opaque, MouseTransformInfo *info)
+void tsc2005_set_transform(void *opaque, const MouseTransformInfo *info)
{
TSC2005State *s = (TSC2005State *) opaque;
diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c
index df7313db5d7..fdd5ff87d94 100644
--- a/hw/input/tsc210x.c
+++ b/hw/input/tsc210x.c
@@ -1176,8 +1176,7 @@ I2SCodec *tsc210x_codec(uWireSlave *chip)
* from the touchscreen. Assuming 12-bit precision was used during
* tslib calibration.
*/
-void tsc210x_set_transform(uWireSlave *chip,
- MouseTransformInfo *info)
+void tsc210x_set_transform(uWireSlave *chip, const MouseTransformInfo *info)
{
TSC210xState *s = (TSC210xState *) chip->opaque;
#if 0
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 25/34] hw/arm/nseries: Constify various read-only arrays
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (23 preceding siblings ...)
2023-01-05 16:44 ` [PULL 24/34] hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo arg Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 26/34] hw/arm/nseries: Silent -Wmissing-field-initializers warning Peter Maydell
` (9 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221220142520.24094-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/nseries.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c
index b151113c275..2ff29f52e2d 100644
--- a/hw/arm/nseries.c
+++ b/hw/arm/nseries.c
@@ -230,13 +230,13 @@ static void n8x0_i2c_setup(struct n800_s *s)
}
/* Touchscreen and keypad controller */
-static MouseTransformInfo n800_pointercal = {
+static const MouseTransformInfo n800_pointercal = {
.x = 800,
.y = 480,
.a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 },
};
-static MouseTransformInfo n810_pointercal = {
+static const MouseTransformInfo n810_pointercal = {
.x = 800,
.y = 480,
.a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 },
@@ -334,7 +334,7 @@ static void n810_key_event(void *opaque, int keycode)
#define M 0
-static int n810_keys[0x80] = {
+static const int n810_keys[0x80] = {
[0x01] = 16, /* Q */
[0x02] = 37, /* K */
[0x03] = 24, /* O */
@@ -810,7 +810,7 @@ static void n8x0_usb_setup(struct n800_s *s)
/* Setup done before the main bootloader starts by some early setup code
* - used when we want to run the main bootloader in emulation. This
* isn't documented. */
-static uint32_t n800_pinout[104] = {
+static const uint32_t n800_pinout[104] = {
0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0,
0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808,
0x08080808, 0x180800c4, 0x00b80000, 0x08080808,
@@ -1060,7 +1060,7 @@ static void n8x0_boot_init(void *opaque)
#define OMAP_TAG_CBUS 0x4e03
#define OMAP_TAG_EM_ASIC_BB5 0x4e04
-static struct omap_gpiosw_info_s {
+static const struct omap_gpiosw_info_s {
const char *name;
int line;
int type;
@@ -1102,7 +1102,7 @@ static struct omap_gpiosw_info_s {
{ NULL }
};
-static struct omap_partition_info_s {
+static const struct omap_partition_info_s {
uint32_t offset;
uint32_t size;
int mask;
@@ -1125,15 +1125,15 @@ static struct omap_partition_info_s {
{ 0, 0, 0, NULL }
};
-static uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR };
+static const uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR };
static int n8x0_atag_setup(void *p, int model)
{
uint8_t *b;
uint16_t *w;
uint32_t *l;
- struct omap_gpiosw_info_s *gpiosw;
- struct omap_partition_info_s *partition;
+ const struct omap_gpiosw_info_s *gpiosw;
+ const struct omap_partition_info_s *partition;
const char *tag;
w = p;
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 26/34] hw/arm/nseries: Silent -Wmissing-field-initializers warning
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (24 preceding siblings ...)
2023-01-05 16:44 ` [PULL 25/34] hw/arm/nseries: Constify various read-only arrays Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 27/34] target/arm: align exposed ID registers with Linux Peter Maydell
` (8 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <philmd@linaro.org>
Silent when compiling with -Wextra:
../hw/arm/nseries.c:1081:12: warning: missing field 'line' initializer [-Wmissing-field-initializers]
{ NULL }
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221220142520.24094-4-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/nseries.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c
index 2ff29f52e2d..c9df063a082 100644
--- a/hw/arm/nseries.c
+++ b/hw/arm/nseries.c
@@ -1078,7 +1078,7 @@ static const struct omap_gpiosw_info_s {
"headphone", N8X0_HEADPHONE_GPIO,
OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
},
- { NULL }
+ { /* end of list */ }
}, n810_gpiosw_info[] = {
{
"gps_reset", N810_GPS_RESET_GPIO,
@@ -1099,7 +1099,7 @@ static const struct omap_gpiosw_info_s {
"slide", N810_SLIDE_GPIO,
OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
},
- { NULL }
+ { /* end of list */ }
};
static const struct omap_partition_info_s {
@@ -1113,16 +1113,14 @@ static const struct omap_partition_info_s {
{ 0x00080000, 0x00200000, 0x0, "kernel" },
{ 0x00280000, 0x00200000, 0x3, "initfs" },
{ 0x00480000, 0x0fb80000, 0x3, "rootfs" },
-
- { 0, 0, 0, NULL }
+ { /* end of list */ }
}, n810_part_info[] = {
{ 0x00000000, 0x00020000, 0x3, "bootloader" },
{ 0x00020000, 0x00060000, 0x0, "config" },
{ 0x00080000, 0x00220000, 0x0, "kernel" },
{ 0x002a0000, 0x00400000, 0x0, "initfs" },
{ 0x006a0000, 0x0f960000, 0x0, "rootfs" },
-
- { 0, 0, 0, NULL }
+ { /* end of list */ }
};
static const uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR };
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 27/34] target/arm: align exposed ID registers with Linux
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (25 preceding siblings ...)
2023-01-05 16:44 ` [PULL 26/34] hw/arm/nseries: Silent -Wmissing-field-initializers warning Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 28/34] hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scope Peter Maydell
` (7 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Zhuojia Shen <chaosdefinition@hotmail.com>
In CPUID registers exposed to userspace, some registers were missing
and some fields were not exposed. This patch aligns exposed ID
registers and their fields with what the upstream kernel currently
exposes.
Specifically, the following new ID registers/fields are exposed to
userspace:
ID_AA64PFR1_EL1.BT: bits 3-0
ID_AA64PFR1_EL1.MTE: bits 11-8
ID_AA64PFR1_EL1.SME: bits 27-24
ID_AA64ZFR0_EL1.SVEver: bits 3-0
ID_AA64ZFR0_EL1.AES: bits 7-4
ID_AA64ZFR0_EL1.BitPerm: bits 19-16
ID_AA64ZFR0_EL1.BF16: bits 23-20
ID_AA64ZFR0_EL1.SHA3: bits 35-32
ID_AA64ZFR0_EL1.SM4: bits 43-40
ID_AA64ZFR0_EL1.I8MM: bits 47-44
ID_AA64ZFR0_EL1.F32MM: bits 55-52
ID_AA64ZFR0_EL1.F64MM: bits 59-56
ID_AA64SMFR0_EL1.F32F32: bit 32
ID_AA64SMFR0_EL1.B16F32: bit 34
ID_AA64SMFR0_EL1.F16F32: bit 35
ID_AA64SMFR0_EL1.I8I32: bits 39-36
ID_AA64SMFR0_EL1.F64F64: bit 48
ID_AA64SMFR0_EL1.I16I64: bits 55-52
ID_AA64SMFR0_EL1.FA64: bit 63
ID_AA64MMFR0_EL1.ECV: bits 63-60
ID_AA64MMFR1_EL1.AFP: bits 47-44
ID_AA64MMFR2_EL1.AT: bits 35-32
ID_AA64ISAR0_EL1.RNDR: bits 63-60
ID_AA64ISAR1_EL1.FRINTTS: bits 35-32
ID_AA64ISAR1_EL1.BF16: bits 47-44
ID_AA64ISAR1_EL1.DGH: bits 51-48
ID_AA64ISAR1_EL1.I8MM: bits 55-52
ID_AA64ISAR2_EL1.WFxT: bits 3-0
ID_AA64ISAR2_EL1.RPRES: bits 7-4
ID_AA64ISAR2_EL1.GPA3: bits 11-8
ID_AA64ISAR2_EL1.APA3: bits 15-12
The code is also refactored to use symbolic names for ID register fields
for better readability and maintainability.
The test case in tests/tcg/aarch64/sysregs.c is also updated to match
the intended behavior.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Message-id: DS7PR12MB6309FB585E10772928F14271ACE79@DS7PR12MB6309.namprd12.prod.outlook.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: use Sn_n_Cn_Cn_n syntax to work with older assemblers
that don't recognize id_aa64isar2_el1 and id_aa64mmfr2_el1]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper.c | 96 +++++++++++++++++++++++++------
tests/tcg/aarch64/sysregs.c | 24 ++++++--
tests/tcg/aarch64/Makefile.target | 7 ++-
3 files changed, 103 insertions(+), 24 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index d3e8e606475..cee38043540 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -8147,31 +8147,89 @@ void register_cp_regs_for_features(ARMCPU *cpu)
#ifdef CONFIG_USER_ONLY
static const ARMCPRegUserSpaceInfo v8_user_idregs[] = {
{ .name = "ID_AA64PFR0_EL1",
- .exported_bits = 0x000f000f00ff0000,
- .fixed_bits = 0x0000000000000011 },
+ .exported_bits = R_ID_AA64PFR0_FP_MASK |
+ R_ID_AA64PFR0_ADVSIMD_MASK |
+ R_ID_AA64PFR0_SVE_MASK |
+ R_ID_AA64PFR0_DIT_MASK,
+ .fixed_bits = (0x1u << R_ID_AA64PFR0_EL0_SHIFT) |
+ (0x1u << R_ID_AA64PFR0_EL1_SHIFT) },
{ .name = "ID_AA64PFR1_EL1",
- .exported_bits = 0x00000000000000f0 },
+ .exported_bits = R_ID_AA64PFR1_BT_MASK |
+ R_ID_AA64PFR1_SSBS_MASK |
+ R_ID_AA64PFR1_MTE_MASK |
+ R_ID_AA64PFR1_SME_MASK },
{ .name = "ID_AA64PFR*_EL1_RESERVED",
- .is_glob = true },
- { .name = "ID_AA64ZFR0_EL1" },
+ .is_glob = true },
+ { .name = "ID_AA64ZFR0_EL1",
+ .exported_bits = R_ID_AA64ZFR0_SVEVER_MASK |
+ R_ID_AA64ZFR0_AES_MASK |
+ R_ID_AA64ZFR0_BITPERM_MASK |
+ R_ID_AA64ZFR0_BFLOAT16_MASK |
+ R_ID_AA64ZFR0_SHA3_MASK |
+ R_ID_AA64ZFR0_SM4_MASK |
+ R_ID_AA64ZFR0_I8MM_MASK |
+ R_ID_AA64ZFR0_F32MM_MASK |
+ R_ID_AA64ZFR0_F64MM_MASK },
+ { .name = "ID_AA64SMFR0_EL1",
+ .exported_bits = R_ID_AA64SMFR0_F32F32_MASK |
+ R_ID_AA64SMFR0_B16F32_MASK |
+ R_ID_AA64SMFR0_F16F32_MASK |
+ R_ID_AA64SMFR0_I8I32_MASK |
+ R_ID_AA64SMFR0_F64F64_MASK |
+ R_ID_AA64SMFR0_I16I64_MASK |
+ R_ID_AA64SMFR0_FA64_MASK },
{ .name = "ID_AA64MMFR0_EL1",
- .fixed_bits = 0x00000000ff000000 },
- { .name = "ID_AA64MMFR1_EL1" },
+ .exported_bits = R_ID_AA64MMFR0_ECV_MASK,
+ .fixed_bits = (0xfu << R_ID_AA64MMFR0_TGRAN64_SHIFT) |
+ (0xfu << R_ID_AA64MMFR0_TGRAN4_SHIFT) },
+ { .name = "ID_AA64MMFR1_EL1",
+ .exported_bits = R_ID_AA64MMFR1_AFP_MASK },
+ { .name = "ID_AA64MMFR2_EL1",
+ .exported_bits = R_ID_AA64MMFR2_AT_MASK },
{ .name = "ID_AA64MMFR*_EL1_RESERVED",
- .is_glob = true },
+ .is_glob = true },
{ .name = "ID_AA64DFR0_EL1",
- .fixed_bits = 0x0000000000000006 },
- { .name = "ID_AA64DFR1_EL1" },
+ .fixed_bits = (0x6u << R_ID_AA64DFR0_DEBUGVER_SHIFT) },
+ { .name = "ID_AA64DFR1_EL1" },
{ .name = "ID_AA64DFR*_EL1_RESERVED",
- .is_glob = true },
+ .is_glob = true },
{ .name = "ID_AA64AFR*",
- .is_glob = true },
+ .is_glob = true },
{ .name = "ID_AA64ISAR0_EL1",
- .exported_bits = 0x00fffffff0fffff0 },
+ .exported_bits = R_ID_AA64ISAR0_AES_MASK |
+ R_ID_AA64ISAR0_SHA1_MASK |
+ R_ID_AA64ISAR0_SHA2_MASK |
+ R_ID_AA64ISAR0_CRC32_MASK |
+ R_ID_AA64ISAR0_ATOMIC_MASK |
+ R_ID_AA64ISAR0_RDM_MASK |
+ R_ID_AA64ISAR0_SHA3_MASK |
+ R_ID_AA64ISAR0_SM3_MASK |
+ R_ID_AA64ISAR0_SM4_MASK |
+ R_ID_AA64ISAR0_DP_MASK |
+ R_ID_AA64ISAR0_FHM_MASK |
+ R_ID_AA64ISAR0_TS_MASK |
+ R_ID_AA64ISAR0_RNDR_MASK },
{ .name = "ID_AA64ISAR1_EL1",
- .exported_bits = 0x000000f0ffffffff },
+ .exported_bits = R_ID_AA64ISAR1_DPB_MASK |
+ R_ID_AA64ISAR1_APA_MASK |
+ R_ID_AA64ISAR1_API_MASK |
+ R_ID_AA64ISAR1_JSCVT_MASK |
+ R_ID_AA64ISAR1_FCMA_MASK |
+ R_ID_AA64ISAR1_LRCPC_MASK |
+ R_ID_AA64ISAR1_GPA_MASK |
+ R_ID_AA64ISAR1_GPI_MASK |
+ R_ID_AA64ISAR1_FRINTTS_MASK |
+ R_ID_AA64ISAR1_SB_MASK |
+ R_ID_AA64ISAR1_BF16_MASK |
+ R_ID_AA64ISAR1_DGH_MASK |
+ R_ID_AA64ISAR1_I8MM_MASK },
+ { .name = "ID_AA64ISAR2_EL1",
+ .exported_bits = R_ID_AA64ISAR2_WFXT_MASK |
+ R_ID_AA64ISAR2_RPRES_MASK |
+ R_ID_AA64ISAR2_GPA3_MASK |
+ R_ID_AA64ISAR2_APA3_MASK },
{ .name = "ID_AA64ISAR*_EL1_RESERVED",
- .is_glob = true },
+ .is_glob = true },
};
modify_arm_cp_regs(v8_idregs, v8_user_idregs);
#endif
@@ -8508,8 +8566,12 @@ void register_cp_regs_for_features(ARMCPU *cpu)
#ifdef CONFIG_USER_ONLY
static const ARMCPRegUserSpaceInfo id_v8_user_midr_cp_reginfo[] = {
{ .name = "MIDR_EL1",
- .exported_bits = 0x00000000ffffffff },
- { .name = "REVIDR_EL1" },
+ .exported_bits = R_MIDR_EL1_REVISION_MASK |
+ R_MIDR_EL1_PARTNUM_MASK |
+ R_MIDR_EL1_ARCHITECTURE_MASK |
+ R_MIDR_EL1_VARIANT_MASK |
+ R_MIDR_EL1_IMPLEMENTER_MASK },
+ { .name = "REVIDR_EL1" },
};
modify_arm_cp_regs(id_v8_midr_cp_reginfo, id_v8_user_midr_cp_reginfo);
#endif
diff --git a/tests/tcg/aarch64/sysregs.c b/tests/tcg/aarch64/sysregs.c
index 40cf8d2877e..46b931f781d 100644
--- a/tests/tcg/aarch64/sysregs.c
+++ b/tests/tcg/aarch64/sysregs.c
@@ -22,6 +22,13 @@
#define HWCAP_CPUID (1 << 11)
#endif
+/*
+ * Older assemblers don't recognize newer system register names,
+ * but we can still access them by the Sn_n_Cn_Cn_n syntax.
+ */
+#define SYS_ID_AA64ISAR2_EL1 S3_0_C0_C6_2
+#define SYS_ID_AA64MMFR2_EL1 S3_0_C0_C7_2
+
int failed_bit_count;
/* Read and print system register `id' value */
@@ -112,18 +119,23 @@ int main(void)
* minimum valid fields - for the purposes of this check allowed
* to have non-zero values.
*/
- get_cpu_reg_check_mask(id_aa64isar0_el1, _m(00ff,ffff,f0ff,fff0));
- get_cpu_reg_check_mask(id_aa64isar1_el1, _m(0000,00f0,ffff,ffff));
+ get_cpu_reg_check_mask(id_aa64isar0_el1, _m(f0ff,ffff,f0ff,fff0));
+ get_cpu_reg_check_mask(id_aa64isar1_el1, _m(00ff,f0ff,ffff,ffff));
+ get_cpu_reg_check_mask(SYS_ID_AA64ISAR2_EL1, _m(0000,0000,0000,ffff));
/* TGran4 & TGran64 as pegged to -1 */
- get_cpu_reg_check_mask(id_aa64mmfr0_el1, _m(0000,0000,ff00,0000));
- get_cpu_reg_check_zero(id_aa64mmfr1_el1);
+ get_cpu_reg_check_mask(id_aa64mmfr0_el1, _m(f000,0000,ff00,0000));
+ get_cpu_reg_check_mask(id_aa64mmfr1_el1, _m(0000,f000,0000,0000));
+ get_cpu_reg_check_mask(SYS_ID_AA64MMFR2_EL1, _m(0000,000f,0000,0000));
/* EL1/EL0 reported as AA64 only */
get_cpu_reg_check_mask(id_aa64pfr0_el1, _m(000f,000f,00ff,0011));
- get_cpu_reg_check_mask(id_aa64pfr1_el1, _m(0000,0000,0000,00f0));
+ get_cpu_reg_check_mask(id_aa64pfr1_el1, _m(0000,0000,0f00,0fff));
/* all hidden, DebugVer fixed to 0x6 (ARMv8 debug architecture) */
get_cpu_reg_check_mask(id_aa64dfr0_el1, _m(0000,0000,0000,0006));
get_cpu_reg_check_zero(id_aa64dfr1_el1);
- get_cpu_reg_check_zero(id_aa64zfr0_el1);
+ get_cpu_reg_check_mask(id_aa64zfr0_el1, _m(0ff0,ff0f,00ff,00ff));
+#ifdef HAS_ARMV9_SME
+ get_cpu_reg_check_mask(id_aa64smfr0_el1, _m(80f1,00fd,0000,0000));
+#endif
get_cpu_reg_check_zero(id_aa64afr0_el1);
get_cpu_reg_check_zero(id_aa64afr1_el1);
diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target
index fc8d90ed692..db122ab4ff3 100644
--- a/tests/tcg/aarch64/Makefile.target
+++ b/tests/tcg/aarch64/Makefile.target
@@ -23,7 +23,8 @@ config-cc.mak: Makefile
$(call cc-option,-march=armv8.1-a+sve2, CROSS_CC_HAS_SVE2); \
$(call cc-option,-march=armv8.3-a, CROSS_CC_HAS_ARMV8_3); \
$(call cc-option,-mbranch-protection=standard, CROSS_CC_HAS_ARMV8_BTI); \
- $(call cc-option,-march=armv8.5-a+memtag, CROSS_CC_HAS_ARMV8_MTE)) 3> config-cc.mak
+ $(call cc-option,-march=armv8.5-a+memtag, CROSS_CC_HAS_ARMV8_MTE); \
+ $(call cc-option,-march=armv9-a+sme, CROSS_CC_HAS_ARMV9_SME)) 3> config-cc.mak
-include config-cc.mak
# Pauth Tests
@@ -53,7 +54,11 @@ endif
ifneq ($(CROSS_CC_HAS_SVE),)
# System Registers Tests
AARCH64_TESTS += sysregs
+ifneq ($(CROSS_CC_HAS_ARMV9_SME),)
+sysregs: CFLAGS+=-march=armv9-a+sme -DHAS_ARMV9_SME
+else
sysregs: CFLAGS+=-march=armv8.1-a+sve
+endif
# SVE ioctl test
AARCH64_TESTS += sve-ioctls
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 28/34] hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scope
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (26 preceding siblings ...)
2023-01-05 16:44 ` [PULL 27/34] target/arm: align exposed ID registers with Linux Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 29/34] hw/arm/smmu-common: Avoid using inlined functions with external linkage Peter Maydell
` (6 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <philmd@linaro.org>
This function is not used anywhere outside this file,
so we can make the function "static void".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20221216214924.4711-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/smmu-common.h | 3 ---
hw/arm/smmu-common.c | 2 +-
2 files changed, 1 insertion(+), 4 deletions(-)
diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h
index 21e62342e92..c5683af07d6 100644
--- a/include/hw/arm/smmu-common.h
+++ b/include/hw/arm/smmu-common.h
@@ -173,7 +173,4 @@ void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova,
/* Unmap the range of all the notifiers registered to any IOMMU mr */
void smmu_inv_notifiers_all(SMMUState *s);
-/* Unmap the range of all the notifiers registered to @mr */
-void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr);
-
#endif /* HW_ARM_SMMU_COMMON_H */
diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c
index 220838525d4..9f196625a2b 100644
--- a/hw/arm/smmu-common.c
+++ b/hw/arm/smmu-common.c
@@ -483,7 +483,7 @@ static void smmu_unmap_notifier_range(IOMMUNotifier *n)
}
/* Unmap all notifiers attached to @mr */
-inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr)
+static void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr)
{
IOMMUNotifier *n;
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 29/34] hw/arm/smmu-common: Avoid using inlined functions with external linkage
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (27 preceding siblings ...)
2023-01-05 16:44 ` [PULL 28/34] hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scope Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 30/34] i.MX7D: Connect GPT timers to IRQ Peter Maydell
` (5 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <philmd@linaro.org>
When using Clang ("Apple clang version 14.0.0 (clang-1400.0.29.202)")
and building with -Wall we get:
hw/arm/smmu-common.c:173:33: warning: static function 'smmu_hash_remove_by_asid_iova' is used in an inline function with external linkage [-Wstatic-in-inline]
hw/arm/smmu-common.h:170:1: note: use 'static' to give inline function 'smmu_iotlb_inv_iova' internal linkage
void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova,
^
static
None of our code base require / use inlined functions with external
linkage. Some places use internal inlining in the hot path. These
two functions are certainly not in any hot path and don't justify
any inlining, so these are likely oversights rather than intentional.
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20221216214924.4711-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/smmu-common.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c
index 9f196625a2b..54186f31cb5 100644
--- a/hw/arm/smmu-common.c
+++ b/hw/arm/smmu-common.c
@@ -116,7 +116,7 @@ void smmu_iotlb_insert(SMMUState *bs, SMMUTransCfg *cfg, SMMUTLBEntry *new)
g_hash_table_insert(bs->iotlb, key, new);
}
-inline void smmu_iotlb_inv_all(SMMUState *s)
+void smmu_iotlb_inv_all(SMMUState *s)
{
trace_smmu_iotlb_inv_all();
g_hash_table_remove_all(s->iotlb);
@@ -146,9 +146,8 @@ static gboolean smmu_hash_remove_by_asid_iova(gpointer key, gpointer value,
((entry->iova & ~info->mask) == info->iova);
}
-inline void
-smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova,
- uint8_t tg, uint64_t num_pages, uint8_t ttl)
+void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova,
+ uint8_t tg, uint64_t num_pages, uint8_t ttl)
{
/* if tg is not set we use 4KB range invalidation */
uint8_t granule = tg ? tg * 2 + 10 : 12;
@@ -174,7 +173,7 @@ smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova,
&info);
}
-inline void smmu_iotlb_inv_asid(SMMUState *s, uint16_t asid)
+void smmu_iotlb_inv_asid(SMMUState *s, uint16_t asid)
{
trace_smmu_iotlb_inv_asid(asid);
g_hash_table_foreach_remove(s->iotlb, smmu_hash_remove_by_asid, &asid);
@@ -374,8 +373,8 @@ error:
*
* return 0 on success
*/
-inline int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm,
- SMMUTLBEntry *tlbe, SMMUPTWEventInfo *info)
+int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm,
+ SMMUTLBEntry *tlbe, SMMUPTWEventInfo *info)
{
if (!cfg->aa64) {
/*
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 30/34] i.MX7D: Connect GPT timers to IRQ
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (28 preceding siblings ...)
2023-01-05 16:44 ` [PULL 29/34] hw/arm/smmu-common: Avoid using inlined functions with external linkage Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 31/34] i.MX7D: Compute clock frequency for the fixed frequency clocks Peter Maydell
` (4 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Jean-Christophe Dubois <jcd@tribudubois.net>
So far the GPT timers were unable to raise IRQs to the processor.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/fsl-imx7.h | 5 +++++
hw/arm/fsl-imx7.c | 10 ++++++++++
2 files changed, 15 insertions(+)
diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h
index 1c5fa6fd676..50f19d8db04 100644
--- a/include/hw/arm/fsl-imx7.h
+++ b/include/hw/arm/fsl-imx7.h
@@ -235,6 +235,11 @@ enum FslIMX7IRQs {
FSL_IMX7_USB2_IRQ = 42,
FSL_IMX7_USB3_IRQ = 40,
+ FSL_IMX7_GPT1_IRQ = 55,
+ FSL_IMX7_GPT2_IRQ = 54,
+ FSL_IMX7_GPT3_IRQ = 53,
+ FSL_IMX7_GPT4_IRQ = 52,
+
FSL_IMX7_WDOG1_IRQ = 78,
FSL_IMX7_WDOG2_IRQ = 79,
FSL_IMX7_WDOG3_IRQ = 10,
diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c
index cc6fdb9373f..146bb559bbc 100644
--- a/hw/arm/fsl-imx7.c
+++ b/hw/arm/fsl-imx7.c
@@ -219,9 +219,19 @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp)
FSL_IMX7_GPT4_ADDR,
};
+ static const int FSL_IMX7_GPTn_IRQ[FSL_IMX7_NUM_GPTS] = {
+ FSL_IMX7_GPT1_IRQ,
+ FSL_IMX7_GPT2_IRQ,
+ FSL_IMX7_GPT3_IRQ,
+ FSL_IMX7_GPT4_IRQ,
+ };
+
s->gpt[i].ccm = IMX_CCM(&s->ccm);
sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, FSL_IMX7_GPTn_ADDR[i]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
+ qdev_get_gpio_in(DEVICE(&s->a7mpcore),
+ FSL_IMX7_GPTn_IRQ[i]));
}
for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) {
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 31/34] i.MX7D: Compute clock frequency for the fixed frequency clocks.
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (29 preceding siblings ...)
2023-01-05 16:44 ` [PULL 30/34] i.MX7D: Connect GPT timers to IRQ Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 32/34] i.MX6UL: Add a specific GPT timer instance for the i.MX6UL Peter Maydell
` (3 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Jean-Christophe Dubois <jcd@tribudubois.net>
CCM derived clocks will have to be added later.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/misc/imx7_ccm.c | 49 +++++++++++++++++++++++++++++++++++++---------
1 file changed, 40 insertions(+), 9 deletions(-)
diff --git a/hw/misc/imx7_ccm.c b/hw/misc/imx7_ccm.c
index 075159e497b..f135ec7b7e4 100644
--- a/hw/misc/imx7_ccm.c
+++ b/hw/misc/imx7_ccm.c
@@ -16,6 +16,10 @@
#include "hw/misc/imx7_ccm.h"
#include "migration/vmstate.h"
+#include "trace.h"
+
+#define CKIH_FREQ 24000000 /* 24MHz crystal input */
+
static void imx7_analog_reset(DeviceState *dev)
{
IMX7AnalogState *s = IMX7_ANALOG(dev);
@@ -219,16 +223,43 @@ static const VMStateDescription vmstate_imx7_ccm = {
static uint32_t imx7_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock)
{
/*
- * This function is "consumed" by GPT emulation code, however on
- * i.MX7 each GPT block can have their own clock root. This means
- * that this functions needs somehow to know requester's identity
- * and the way to pass it: be it via additional IMXClk constants
- * or by adding another argument to this method needs to be
- * figured out
+ * This function is "consumed" by GPT emulation code. Some clocks
+ * have fixed frequencies and we can provide requested frequency
+ * easily. However for CCM provided clocks (like IPG) each GPT
+ * timer can have its own clock root.
+ * This means we need additionnal information when calling this
+ * function to know the requester's identity.
*/
- qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Not implemented\n",
- TYPE_IMX7_CCM, __func__);
- return 0;
+ uint32_t freq = 0;
+
+ switch (clock) {
+ case CLK_NONE:
+ break;
+ case CLK_32k:
+ freq = CKIL_FREQ;
+ break;
+ case CLK_HIGH:
+ freq = CKIH_FREQ;
+ break;
+ case CLK_IPG:
+ case CLK_IPG_HIGH:
+ /*
+ * For now we don't have a way to figure out the device this
+ * function is called for. Until then the IPG derived clocks
+ * are left unimplemented.
+ */
+ qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Clock %d Not implemented\n",
+ TYPE_IMX7_CCM, __func__, clock);
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: unsupported clock %d\n",
+ TYPE_IMX7_CCM, __func__, clock);
+ break;
+ }
+
+ trace_ccm_clock_freq(clock, freq);
+
+ return freq;
}
static void imx7_ccm_class_init(ObjectClass *klass, void *data)
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 32/34] i.MX6UL: Add a specific GPT timer instance for the i.MX6UL
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (30 preceding siblings ...)
2023-01-05 16:44 ` [PULL 31/34] i.MX7D: Compute clock frequency for the fixed frequency clocks Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 33/34] i.MX7D: Connect IRQs to GPIO devices Peter Maydell
` (2 subsequent siblings)
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Jean-Christophe Dubois <jcd@tribudubois.net>
The i.MX6UL doesn't support CLK_HIGH ou CLK_HIGH_DIV clock source.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/timer/imx_gpt.h | 1 +
hw/arm/fsl-imx6ul.c | 2 +-
hw/misc/imx6ul_ccm.c | 6 ------
hw/timer/imx_gpt.c | 25 +++++++++++++++++++++++++
4 files changed, 27 insertions(+), 7 deletions(-)
diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h
index ff5c8a351a0..5a1230da35e 100644
--- a/include/hw/timer/imx_gpt.h
+++ b/include/hw/timer/imx_gpt.h
@@ -78,6 +78,7 @@
#define TYPE_IMX25_GPT "imx25.gpt"
#define TYPE_IMX31_GPT "imx31.gpt"
#define TYPE_IMX6_GPT "imx6.gpt"
+#define TYPE_IMX6UL_GPT "imx6ul.gpt"
#define TYPE_IMX7_GPT "imx7.gpt"
#define TYPE_IMX_GPT TYPE_IMX25_GPT
diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c
index f1897123294..d88d6cc1c5f 100644
--- a/hw/arm/fsl-imx6ul.c
+++ b/hw/arm/fsl-imx6ul.c
@@ -81,7 +81,7 @@ static void fsl_imx6ul_init(Object *obj)
*/
for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) {
snprintf(name, NAME_SIZE, "gpt%d", i);
- object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX7_GPT);
+ object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX6UL_GPT);
}
/*
diff --git a/hw/misc/imx6ul_ccm.c b/hw/misc/imx6ul_ccm.c
index a65d0314556..e01bb68ac72 100644
--- a/hw/misc/imx6ul_ccm.c
+++ b/hw/misc/imx6ul_ccm.c
@@ -522,12 +522,6 @@ static uint32_t imx6ul_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock)
case CLK_32k:
freq = CKIL_FREQ;
break;
- case CLK_HIGH:
- freq = CKIH_FREQ;
- break;
- case CLK_HIGH_DIV:
- freq = CKIH_FREQ / 8;
- break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: unsupported clock %d\n",
TYPE_IMX6UL_CCM, __func__, clock);
diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c
index 80b83026399..7222b1b3874 100644
--- a/hw/timer/imx_gpt.c
+++ b/hw/timer/imx_gpt.c
@@ -115,6 +115,17 @@ static const IMXClk imx6_gpt_clocks[] = {
CLK_HIGH, /* 111 reference clock */
};
+static const IMXClk imx6ul_gpt_clocks[] = {
+ CLK_NONE, /* 000 No clock source */
+ CLK_IPG, /* 001 ipg_clk, 532MHz*/
+ CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */
+ CLK_EXT, /* 011 External clock */
+ CLK_32k, /* 100 ipg_clk_32k */
+ CLK_NONE, /* 101 not defined */
+ CLK_NONE, /* 110 not defined */
+ CLK_NONE, /* 111 not defined */
+};
+
static const IMXClk imx7_gpt_clocks[] = {
CLK_NONE, /* 000 No clock source */
CLK_IPG, /* 001 ipg_clk, 532MHz*/
@@ -539,6 +550,13 @@ static void imx6_gpt_init(Object *obj)
s->clocks = imx6_gpt_clocks;
}
+static void imx6ul_gpt_init(Object *obj)
+{
+ IMXGPTState *s = IMX_GPT(obj);
+
+ s->clocks = imx6ul_gpt_clocks;
+}
+
static void imx7_gpt_init(Object *obj)
{
IMXGPTState *s = IMX_GPT(obj);
@@ -566,6 +584,12 @@ static const TypeInfo imx6_gpt_info = {
.instance_init = imx6_gpt_init,
};
+static const TypeInfo imx6ul_gpt_info = {
+ .name = TYPE_IMX6UL_GPT,
+ .parent = TYPE_IMX25_GPT,
+ .instance_init = imx6ul_gpt_init,
+};
+
static const TypeInfo imx7_gpt_info = {
.name = TYPE_IMX7_GPT,
.parent = TYPE_IMX25_GPT,
@@ -577,6 +601,7 @@ static void imx_gpt_register_types(void)
type_register_static(&imx25_gpt_info);
type_register_static(&imx31_gpt_info);
type_register_static(&imx6_gpt_info);
+ type_register_static(&imx6ul_gpt_info);
type_register_static(&imx7_gpt_info);
}
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 33/34] i.MX7D: Connect IRQs to GPIO devices.
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (31 preceding siblings ...)
2023-01-05 16:44 ` [PULL 32/34] i.MX6UL: Add a specific GPT timer instance for the i.MX6UL Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-05 16:44 ` [PULL 34/34] hw/net: Fix read of uninitialized memory in imx_fec Peter Maydell
2023-01-06 12:10 ` [PULL 00/34] target-arm queue Peter Maydell
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Jean-Christophe Dubois <jcd@tribudubois.net>
IRQs were not associated to the various GPIO devices inside i.MX7D.
This patch brings the i.MX7D on par with i.MX6.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20221226101418.415170-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/fsl-imx7.h | 15 +++++++++++++++
hw/arm/fsl-imx7.c | 31 ++++++++++++++++++++++++++++++-
2 files changed, 45 insertions(+), 1 deletion(-)
diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h
index 50f19d8db04..4e5e0718648 100644
--- a/include/hw/arm/fsl-imx7.h
+++ b/include/hw/arm/fsl-imx7.h
@@ -240,6 +240,21 @@ enum FslIMX7IRQs {
FSL_IMX7_GPT3_IRQ = 53,
FSL_IMX7_GPT4_IRQ = 52,
+ FSL_IMX7_GPIO1_LOW_IRQ = 64,
+ FSL_IMX7_GPIO1_HIGH_IRQ = 65,
+ FSL_IMX7_GPIO2_LOW_IRQ = 66,
+ FSL_IMX7_GPIO2_HIGH_IRQ = 67,
+ FSL_IMX7_GPIO3_LOW_IRQ = 68,
+ FSL_IMX7_GPIO3_HIGH_IRQ = 69,
+ FSL_IMX7_GPIO4_LOW_IRQ = 70,
+ FSL_IMX7_GPIO4_HIGH_IRQ = 71,
+ FSL_IMX7_GPIO5_LOW_IRQ = 72,
+ FSL_IMX7_GPIO5_HIGH_IRQ = 73,
+ FSL_IMX7_GPIO6_LOW_IRQ = 74,
+ FSL_IMX7_GPIO6_HIGH_IRQ = 75,
+ FSL_IMX7_GPIO7_LOW_IRQ = 76,
+ FSL_IMX7_GPIO7_HIGH_IRQ = 77,
+
FSL_IMX7_WDOG1_IRQ = 78,
FSL_IMX7_WDOG2_IRQ = 79,
FSL_IMX7_WDOG3_IRQ = 10,
diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c
index 146bb559bbc..afc74807990 100644
--- a/hw/arm/fsl-imx7.c
+++ b/hw/arm/fsl-imx7.c
@@ -245,8 +245,37 @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp)
FSL_IMX7_GPIO7_ADDR,
};
+ static const int FSL_IMX7_GPIOn_LOW_IRQ[FSL_IMX7_NUM_GPIOS] = {
+ FSL_IMX7_GPIO1_LOW_IRQ,
+ FSL_IMX7_GPIO2_LOW_IRQ,
+ FSL_IMX7_GPIO3_LOW_IRQ,
+ FSL_IMX7_GPIO4_LOW_IRQ,
+ FSL_IMX7_GPIO5_LOW_IRQ,
+ FSL_IMX7_GPIO6_LOW_IRQ,
+ FSL_IMX7_GPIO7_LOW_IRQ,
+ };
+
+ static const int FSL_IMX7_GPIOn_HIGH_IRQ[FSL_IMX7_NUM_GPIOS] = {
+ FSL_IMX7_GPIO1_HIGH_IRQ,
+ FSL_IMX7_GPIO2_HIGH_IRQ,
+ FSL_IMX7_GPIO3_HIGH_IRQ,
+ FSL_IMX7_GPIO4_HIGH_IRQ,
+ FSL_IMX7_GPIO5_HIGH_IRQ,
+ FSL_IMX7_GPIO6_HIGH_IRQ,
+ FSL_IMX7_GPIO7_HIGH_IRQ,
+ };
+
sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), &error_abort);
- sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, FSL_IMX7_GPIOn_ADDR[i]);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0,
+ FSL_IMX7_GPIOn_ADDR[i]);
+
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
+ qdev_get_gpio_in(DEVICE(&s->a7mpcore),
+ FSL_IMX7_GPIOn_LOW_IRQ[i]));
+
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1,
+ qdev_get_gpio_in(DEVICE(&s->a7mpcore),
+ FSL_IMX7_GPIOn_HIGH_IRQ[i]));
}
/*
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PULL 34/34] hw/net: Fix read of uninitialized memory in imx_fec.
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (32 preceding siblings ...)
2023-01-05 16:44 ` [PULL 33/34] i.MX7D: Connect IRQs to GPIO devices Peter Maydell
@ 2023-01-05 16:44 ` Peter Maydell
2023-01-06 12:10 ` [PULL 00/34] target-arm queue Peter Maydell
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-05 16:44 UTC (permalink / raw)
To: qemu-devel
From: Stephen Longfield <slongfield@google.com>
Size is used at lines 1088/1188 for the loop, which reads the last 4
bytes from the crc_ptr so it does need to get increased, however it
shouldn't be increased before the buffer is passed to CRC computation,
or the crc32 function will access uninitialized memory.
This was pointed out to me by clg@kaod.org during the code review of
a similar patch to hw/net/ftgmac100.c
Change-Id: Ib0464303b191af1e28abeb2f5105eb25aadb5e9b
Signed-off-by: Stephen Longfield <slongfield@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Message-id: 20221221183202.3788132-1-slongfield@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/net/imx_fec.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index 8c11b237de7..c862d965930 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -1068,9 +1068,9 @@ static ssize_t imx_fec_receive(NetClientState *nc, const uint8_t *buf,
return 0;
}
- /* 4 bytes for the CRC. */
- size += 4;
crc = cpu_to_be32(crc32(~0, buf, size));
+ /* Increase size by 4, loop below reads the last 4 bytes from crc_ptr. */
+ size += 4;
crc_ptr = (uint8_t *) &crc;
/* Huge frames are truncated. */
@@ -1164,9 +1164,9 @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
return 0;
}
- /* 4 bytes for the CRC. */
- size += 4;
crc = cpu_to_be32(crc32(~0, buf, size));
+ /* Increase size by 4, loop below reads the last 4 bytes from crc_ptr. */
+ size += 4;
crc_ptr = (uint8_t *) &crc;
if (shift16) {
--
2.25.1
^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PULL 00/34] target-arm queue
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
` (33 preceding siblings ...)
2023-01-05 16:44 ` [PULL 34/34] hw/net: Fix read of uninitialized memory in imx_fec Peter Maydell
@ 2023-01-06 12:10 ` Peter Maydell
34 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2023-01-06 12:10 UTC (permalink / raw)
To: qemu-devel
On Thu, 5 Jan 2023 at 16:44, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> Some arm patches; my to-review queue is by no means empty, but
> this is a big enough set of patches to be getting on with...
>
> -- PMM
>
> The following changes since commit cb9c6a8e5ad6a1f0ce164d352e3102df46986e22:
>
> .gitlab-ci.d/windows: Work-around timeout and OpenGL problems of the MSYS2 jobs (2023-01-04 18:58:33 +0000)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230105
>
> for you to fetch changes up to 93c9678de9dc7d2e68f9e8477da072bac30ef132:
>
> hw/net: Fix read of uninitialized memory in imx_fec. (2023-01-05 15:33:00 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
> * Implement AArch32 ARMv8-R support
> * Add Cortex-R52 CPU
> * fix handling of HLT semihosting in system mode
> * hw/timer/ixm_epit: cleanup and fix bug in compare handling
> * target/arm: Coding style fixes
> * target/arm: Clean up includes
> * nseries: minor code cleanups
> * target/arm: align exposed ID registers with Linux
> * hw/arm/smmu-common: remove unnecessary inlines
> * i.MX7D: Handle GPT timers
> * i.MX7D: Connect IRQs to GPIO devices
> * i.MX6UL: Add a specific GPT timer instance
> * hw/net: Fix read of uninitialized memory in imx_fec
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/8.0
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PULL 00/34] target-arm queue
2020-07-03 16:53 Peter Maydell
2020-07-03 17:50 ` no-reply
@ 2020-07-04 17:43 ` Peter Maydell
1 sibling, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2020-07-04 17:43 UTC (permalink / raw)
To: QEMU Developers
On Fri, 3 Jul 2020 at 17:54, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> I might squeeze in another pullreq before softfreeze, but the
> queue was already big enough that I wanted to send this lot out now.
>
> -- PMM
>
> The following changes since commit 4abf70a661a5df3886ac9d7c19c3617fa92b922a:
>
> Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-06-24' into staging (2020-07-03 15:34:45 +0100)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200703
>
> for you to fetch changes up to 0f10bf84a9d489259a5b11c6aa1b05c1175b76ea:
>
> Deprecate TileGX port (2020-07-03 16:59:46 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
> * i.MX6UL EVK board: put PHYs in the correct places
> * hw/arm/virt: Let the virtio-iommu bypass MSIs
> * target/arm: kvm: Handle DABT with no valid ISS
> * hw/arm/virt-acpi-build: Only expose flash on older machine types
> * target/arm: Fix temp double-free in sve ldr/str
> * hw/display/bcm2835_fb.c: Initialize all fields of struct
> * hw/arm/spitz: Code cleanup to fix Coverity-detected memory leak
> * Deprecate TileGX port
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/5.1
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PULL 00/34] target-arm queue
2020-07-03 16:53 Peter Maydell
@ 2020-07-03 17:50 ` no-reply
2020-07-04 17:43 ` Peter Maydell
1 sibling, 0 replies; 46+ messages in thread
From: no-reply @ 2020-07-03 17:50 UTC (permalink / raw)
To: peter.maydell; +Cc: qemu-devel
Patchew URL: https://patchew.org/QEMU/20200703165405.17672-1-peter.maydell@linaro.org/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Subject: [PULL 00/34] target-arm queue
Type: series
Message-id: 20200703165405.17672-1-peter.maydell@linaro.org
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
From https://github.com/patchew-project/qemu
* [new tag] patchew/20200703165405.17672-1-peter.maydell@linaro.org -> patchew/20200703165405.17672-1-peter.maydell@linaro.org
Switched to a new branch 'test'
d638580 Deprecate TileGX port
1e2e778 Replace uses of FROM_SSI_SLAVE() macro with QOM casts
92a5f92 hw/arm/spitz: Provide usual QOM macros for corgi-ssp and spitz-lcdtg
d578f7a hw/arm/pxa2xx_pic: Use LOG_GUEST_ERROR for bad guest register accesses
8ca1ff9 hw/arm/spitz: Use LOG_GUEST_ERROR for bad guest register accesses
bdc8b3f hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses
a7f0ce8 hw/arm/spitz: Encapsulate misc GPIO handling in a device
2d29801 hw/misc/max111x: Create header file for documentation, TYPE_ macros
1b20083 hw/misc/max111x: Use GPIO lines rather than max111x_set_input()
9ddef16 hw/arm/spitz: Use max111x properties to set initial values
208445b ssi: Add ssi_realize_and_unref()
7017444 hw/misc/max111x: Don't use vmstate_register()
57e564b hw/misc/max111x: provide QOM properties for setting initial values
4902bce hw/arm/spitz: Implement inbound GPIO lines for bit5 and power signals
d769576 hw/arm/spitz: Keep pointers to scp0, scp1 in SpitzMachineState
9970786 hw/arm/spitz: Keep pointers to MPU and SSI devices in SpitzMachineState
8943225 hw/arm/spitz: Create SpitzMachineClass abstract base class
2d5eafe hw/arm/spitz: Detabify
1f8dfdb hw/display/bcm2835_fb.c: Initialize all fields of struct
20ee56a target/arm: Fix temp double-free in sve ldr/str
705ce73 tests/acpi: virt: update golden masters for DSDT
c3b5af7 hw/arm/virt-acpi-build: Only expose flash on older machine types
e26cb37 tests/acpi: virt: allow DSDT acpi table changes
c824523 tests/acpi: remove stale allowed tables
4bcd8be target/arm: kvm: Handle misconfigured dabt injection
4dba079 target/arm: kvm: Handle DABT with no valid ISS
71f7055 hw/arm/virt: Let the virtio-iommu bypass MSIs
b692f4b virtio-iommu-pci: Add array of Interval properties
bf5c2b0 virtio-iommu: Handle reserved regions in the translation process
da96f35 virtio-iommu: Implement RESV_MEM probe request
b518252 qdev: Introduce DEFINE_PROP_RESERVED_REGION
88ac8a1 Select MDIO device 2 and 1 as PHY devices for i.MX6UL EVK board.
ab25de9 Add the ability to select a different PHY for each i.MX6UL FEC interface
0e700cc Add a phy-num property to the i.MX FEC emulator
=== OUTPUT BEGIN ===
1/34 Checking commit 0e700cc2f90d (Add a phy-num property to the i.MX FEC emulator)
2/34 Checking commit ab25de9b1194 (Add the ability to select a different PHY for each i.MX6UL FEC interface)
3/34 Checking commit 88ac8a1e6c55 (Select MDIO device 2 and 1 as PHY devices for i.MX6UL EVK board.)
4/34 Checking commit b518252f4b6a (qdev: Introduce DEFINE_PROP_RESERVED_REGION)
5/34 Checking commit da96f35271a3 (virtio-iommu: Implement RESV_MEM probe request)
6/34 Checking commit bf5c2b0b1ae2 (virtio-iommu: Handle reserved regions in the translation process)
7/34 Checking commit b692f4b0e005 (virtio-iommu-pci: Add array of Interval properties)
8/34 Checking commit 71f7055c32e1 (hw/arm/virt: Let the virtio-iommu bypass MSIs)
9/34 Checking commit 4dba079f1e38 (target/arm: kvm: Handle DABT with no valid ISS)
10/34 Checking commit 4bcd8bef2ef5 (target/arm: kvm: Handle misconfigured dabt injection)
11/34 Checking commit c824523e1b1f (tests/acpi: remove stale allowed tables)
12/34 Checking commit e26cb3737b8e (tests/acpi: virt: allow DSDT acpi table changes)
13/34 Checking commit c3b5af781c16 (hw/arm/virt-acpi-build: Only expose flash on older machine types)
14/34 Checking commit 705ce7328c86 (tests/acpi: virt: update golden masters for DSDT)
15/34 Checking commit 20ee56a97cef (target/arm: Fix temp double-free in sve ldr/str)
16/34 Checking commit 1f8dfdbe0e2f (hw/display/bcm2835_fb.c: Initialize all fields of struct)
17/34 Checking commit 2d5eafee3dfb (hw/arm/spitz: Detabify)
ERROR: space prohibited before that '++' (ctx:WxB)
#113: FILE: hw/arm/spitz.c:303:
+#define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c
^
ERROR: Macros with complex values should be enclosed in parenthesis
#113: FILE: hw/arm/spitz.c:303:
+#define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c
total: 2 errors, 0 warnings, 259 lines checked
Patch 17/34 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
18/34 Checking commit 89432250560f (hw/arm/spitz: Create SpitzMachineClass abstract base class)
19/34 Checking commit 9970786d97e1 (hw/arm/spitz: Keep pointers to MPU and SSI devices in SpitzMachineState)
20/34 Checking commit d769576c9302 (hw/arm/spitz: Keep pointers to scp0, scp1 in SpitzMachineState)
21/34 Checking commit 4902bce57643 (hw/arm/spitz: Implement inbound GPIO lines for bit5 and power signals)
WARNING: line over 80 characters
#96: FILE: hw/arm/spitz.c:859:
+ qdev_get_gpio_in_named(sms->lcdtg, "bl_power", 0));
total: 0 errors, 1 warnings, 68 lines checked
Patch 21/34 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
22/34 Checking commit 57e564bca41b (hw/misc/max111x: provide QOM properties for setting initial values)
23/34 Checking commit 701744470cb1 (hw/misc/max111x: Don't use vmstate_register())
24/34 Checking commit 208445bd32c9 (ssi: Add ssi_realize_and_unref())
25/34 Checking commit 9ddef165a4eb (hw/arm/spitz: Use max111x properties to set initial values)
WARNING: Block comments use a leading /* on a separate line
#31: FILE: hw/arm/spitz.c:736:
+ qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */,
WARNING: Block comments use a leading /* on a separate line
#33: FILE: hw/arm/spitz.c:738:
+ qdev_prop_set_uint8(sms->max1111, "input2" /* BATT_TEMP */, 0);
WARNING: Block comments use a leading /* on a separate line
#34: FILE: hw/arm/spitz.c:739:
+ qdev_prop_set_uint8(sms->max1111, "input3" /* ACIN_VOLT */,
total: 0 errors, 3 warnings, 18 lines checked
Patch 25/34 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
26/34 Checking commit 1b20083f7207 (hw/misc/max111x: Use GPIO lines rather than max111x_set_input())
27/34 Checking commit 2d29801356e9 (hw/misc/max111x: Create header file for documentation, TYPE_ macros)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#96:
new file mode 100644
total: 0 errors, 1 warnings, 113 lines checked
Patch 27/34 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
28/34 Checking commit a7f0ce85ac48 (hw/arm/spitz: Encapsulate misc GPIO handling in a device)
WARNING: line over 80 characters
#186: FILE: hw/arm/spitz.c:893:
+ qdev_get_gpio_in(sms->max1111, MAX1111_BATT_TEMP));
total: 0 errors, 1 warnings, 185 lines checked
Patch 28/34 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
29/34 Checking commit bdc8b3f67a7c (hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses)
30/34 Checking commit 8ca1ff9ccf5b (hw/arm/spitz: Use LOG_GUEST_ERROR for bad guest register accesses)
31/34 Checking commit d578f7a7793b (hw/arm/pxa2xx_pic: Use LOG_GUEST_ERROR for bad guest register accesses)
32/34 Checking commit 92a5f929696f (hw/arm/spitz: Provide usual QOM macros for corgi-ssp and spitz-lcdtg)
33/34 Checking commit 1e2e778ea0bb (Replace uses of FROM_SSI_SLAVE() macro with QOM casts)
34/34 Checking commit d638580b6ac3 (Deprecate TileGX port)
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/20200703165405.17672-1-peter.maydell@linaro.org/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PULL 00/34] target-arm queue
@ 2020-07-03 16:53 Peter Maydell
2020-07-03 17:50 ` no-reply
2020-07-04 17:43 ` Peter Maydell
0 siblings, 2 replies; 46+ messages in thread
From: Peter Maydell @ 2020-07-03 16:53 UTC (permalink / raw)
To: qemu-devel
I might squeeze in another pullreq before softfreeze, but the
queue was already big enough that I wanted to send this lot out now.
-- PMM
The following changes since commit 4abf70a661a5df3886ac9d7c19c3617fa92b922a:
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-06-24' into staging (2020-07-03 15:34:45 +0100)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200703
for you to fetch changes up to 0f10bf84a9d489259a5b11c6aa1b05c1175b76ea:
Deprecate TileGX port (2020-07-03 16:59:46 +0100)
----------------------------------------------------------------
target-arm queue:
* i.MX6UL EVK board: put PHYs in the correct places
* hw/arm/virt: Let the virtio-iommu bypass MSIs
* target/arm: kvm: Handle DABT with no valid ISS
* hw/arm/virt-acpi-build: Only expose flash on older machine types
* target/arm: Fix temp double-free in sve ldr/str
* hw/display/bcm2835_fb.c: Initialize all fields of struct
* hw/arm/spitz: Code cleanup to fix Coverity-detected memory leak
* Deprecate TileGX port
----------------------------------------------------------------
Andrew Jones (4):
tests/acpi: remove stale allowed tables
tests/acpi: virt: allow DSDT acpi table changes
hw/arm/virt-acpi-build: Only expose flash on older machine types
tests/acpi: virt: update golden masters for DSDT
Beata Michalska (2):
target/arm: kvm: Handle DABT with no valid ISS
target/arm: kvm: Handle misconfigured dabt injection
Eric Auger (5):
qdev: Introduce DEFINE_PROP_RESERVED_REGION
virtio-iommu: Implement RESV_MEM probe request
virtio-iommu: Handle reserved regions in the translation process
virtio-iommu-pci: Add array of Interval properties
hw/arm/virt: Let the virtio-iommu bypass MSIs
Jean-Christophe Dubois (3):
Add a phy-num property to the i.MX FEC emulator
Add the ability to select a different PHY for each i.MX6UL FEC interface
Select MDIO device 2 and 1 as PHY devices for i.MX6UL EVK board.
Peter Maydell (19):
hw/display/bcm2835_fb.c: Initialize all fields of struct
hw/arm/spitz: Detabify
hw/arm/spitz: Create SpitzMachineClass abstract base class
hw/arm/spitz: Keep pointers to MPU and SSI devices in SpitzMachineState
hw/arm/spitz: Keep pointers to scp0, scp1 in SpitzMachineState
hw/arm/spitz: Implement inbound GPIO lines for bit5 and power signals
hw/misc/max111x: provide QOM properties for setting initial values
hw/misc/max111x: Don't use vmstate_register()
ssi: Add ssi_realize_and_unref()
hw/arm/spitz: Use max111x properties to set initial values
hw/misc/max111x: Use GPIO lines rather than max111x_set_input()
hw/misc/max111x: Create header file for documentation, TYPE_ macros
hw/arm/spitz: Encapsulate misc GPIO handling in a device
hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses
hw/arm/spitz: Use LOG_GUEST_ERROR for bad guest register accesses
hw/arm/pxa2xx_pic: Use LOG_GUEST_ERROR for bad guest register accesses
hw/arm/spitz: Provide usual QOM macros for corgi-ssp and spitz-lcdtg
Replace uses of FROM_SSI_SLAVE() macro with QOM casts
Deprecate TileGX port
Richard Henderson (1):
target/arm: Fix temp double-free in sve ldr/str
docs/system/deprecated.rst | 11 +
include/exec/memory.h | 6 +
include/hw/arm/fsl-imx6ul.h | 2 +
include/hw/arm/pxa.h | 1 -
include/hw/arm/sharpsl.h | 3 -
include/hw/arm/virt.h | 8 +
include/hw/misc/max111x.h | 56 +++
include/hw/net/imx_fec.h | 1 +
include/hw/qdev-properties.h | 3 +
include/hw/ssi/ssi.h | 31 +-
include/hw/virtio/virtio-iommu.h | 2 +
include/qemu/typedefs.h | 1 +
target/arm/cpu.h | 2 +
target/arm/kvm_arm.h | 10 +
target/arm/translate-a64.h | 1 +
tests/qtest/bios-tables-test-allowed-diff.h | 18 -
hw/arm/fsl-imx6ul.c | 10 +
hw/arm/mcimx6ul-evk.c | 2 +
hw/arm/pxa2xx_pic.c | 9 +-
hw/arm/spitz.c | 507 ++++++++++++++++------------
hw/arm/virt-acpi-build.c | 5 +-
hw/arm/virt.c | 33 ++
hw/arm/z2.c | 11 +-
hw/core/qdev-properties.c | 89 +++++
hw/display/ads7846.c | 9 +-
hw/display/bcm2835_fb.c | 4 +
hw/display/ssd0323.c | 10 +-
hw/gpio/zaurus.c | 12 +-
hw/misc/max111x.c | 86 +++--
hw/net/imx_fec.c | 24 +-
hw/sd/ssi-sd.c | 4 +-
hw/ssi/ssi.c | 7 +-
hw/virtio/virtio-iommu-pci.c | 11 +
hw/virtio/virtio-iommu.c | 114 ++++++-
target/arm/kvm.c | 80 +++++
target/arm/kvm32.c | 34 ++
target/arm/kvm64.c | 49 +++
target/arm/translate-a64.c | 6 +
target/arm/translate-sve.c | 8 +-
MAINTAINERS | 1 +
hw/net/trace-events | 4 +-
hw/virtio/trace-events | 1 +
tests/data/acpi/virt/DSDT | Bin 5307 -> 5205 bytes
tests/data/acpi/virt/DSDT.memhp | Bin 6668 -> 6566 bytes
tests/data/acpi/virt/DSDT.numamem | Bin 5307 -> 5205 bytes
45 files changed, 974 insertions(+), 312 deletions(-)
create mode 100644 include/hw/misc/max111x.h
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PULL 00/34] target-arm queue
2020-05-11 13:33 Peter Maydell
2020-05-11 14:03 ` Peter Maydell
2020-05-11 15:17 ` no-reply
@ 2020-05-11 15:44 ` Peter Maydell
2 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2020-05-11 15:44 UTC (permalink / raw)
To: QEMU Developers, Richard Henderson
On Mon, 11 May 2020 at 14:34, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> The following changes since commit c88f1ffc19e38008a1c33ae039482a860aa7418c:
>
> Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging (2020-05-08 14:29:18 +0100)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200511
>
> for you to fetch changes up to 7e17d50ebd359ee5fa3d65d7fdc0fe0336d60694:
>
> target/arm: Fix tcg_gen_gvec_dup_imm vs DUP (indexed) (2020-05-11 14:22:54 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
> aspeed: Add boot stub for smp booting
> target/arm: Drop access_el3_aa32ns_aa64any()
> aspeed: Support AST2600A1 silicon revision
> aspeed: sdmc: Implement AST2600 locking behaviour
> nrf51: Tracing cleanups
> target/arm: Improve handling of SVE loads and stores
> target/arm: Don't show TCG-only CPUs in KVM-only QEMU builds
> hw/arm/musicpal: Map the UART devices unconditionally
> target/arm: Fix tcg_gen_gvec_dup_imm vs DUP (indexed)
> target/arm: Use tcg_gen_gvec_5_ptr for sve FMLA/FCMLA
Applied, thanks. (I just blew away the broken build trees which
had missing .d files -- it didn't seem worth trying to
investigate why they were missing, and they've been created
properly in the rebuild.)
Please update the changelog at https://wiki.qemu.org/ChangeLog/5.1
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PULL 00/34] target-arm queue
2020-05-11 13:33 Peter Maydell
2020-05-11 14:03 ` Peter Maydell
@ 2020-05-11 15:17 ` no-reply
2020-05-11 15:44 ` Peter Maydell
2 siblings, 0 replies; 46+ messages in thread
From: no-reply @ 2020-05-11 15:17 UTC (permalink / raw)
To: peter.maydell; +Cc: qemu-devel
Patchew URL: https://patchew.org/QEMU/20200511133405.5275-1-peter.maydell@linaro.org/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Message-id: 20200511133405.5275-1-peter.maydell@linaro.org
Subject: [PULL 00/34] target-arm queue
Type: series
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
- [tag update] patchew/20200508230823.22956-1-walling@linux.ibm.com -> patchew/20200508230823.22956-1-walling@linux.ibm.com
Switched to a new branch 'test'
9dfe2c2 target/arm: Fix tcg_gen_gvec_dup_imm vs DUP (indexed)
cfaddf9 target/arm: Use tcg_gen_gvec_5_ptr for sve FMLA/FCMLA
7b2835e hw/arm/musicpal: Map the UART devices unconditionally
25a82de target/arm: Restrict TCG cpus to TCG accel
ea192eb target/arm/cpu: Restrict v8M IDAU interface to Aarch32 CPUs
155a4fc target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[]
ae7d2bb target/arm: Make set_feature() available for other files
3580056 target/arm/kvm: Inline set_feature() calls
e1812d5 target/arm: Remove sve_memopidx
4c62164 target/arm: Reuse sve_probe_page for gather loads
a9d5f8c target/arm: Reuse sve_probe_page for scatter stores
f189a3c target/arm: Reuse sve_probe_page for gather first-fault loads
0036b73 target/arm: Use SVEContLdSt for contiguous stores
14753d7 target/arm: Update contiguous first-fault and no-fault loads
7e60f45 target/arm: Use SVEContLdSt for multi-register contiguous loads
bb5288a target/arm: Handle watchpoints in sve_ld1_r
ad4a669 target/arm: Use SVEContLdSt in sve_ld1_r
e5540d6 target/arm: Adjust interface of sve_ld1_host_fn
7feb92f target/arm: Add sve infrastructure for page lookup
9efa4b5 target/arm: Drop manual handling of set/clear_helper_retaddr
d9b5d7d target/arm: Use cpu_*_data_ra for sve_ldst_tlb_fn
4f7c0fe accel/tcg: Add endian-specific cpu_{ld, st}* operations
224ecf5 accel/tcg: Add probe_access_flags
c10fe3e accel/tcg: Adjust probe_access call to page_check_range
614fa6a accel/tcg: Add block comment for probe_access
e0d5231 exec: Fix cpu_watchpoint_address_matches address length
242ddfc exec: Add block comments for watchpoint routines
3991eff hw/timer/nrf51_timer: Add trace event of counter value update
1ab8730 hw/timer/nrf51_timer: Display timer ID in trace events
7cdf7df hw/arm/nrf51: Add NRF51_PERIPHERAL_SIZE definition
cdfa878 aspeed: sdmc: Implement AST2600 locking behaviour
188b075 aspeed: Support AST2600A1 silicon revision
39850d0 target/arm: Drop access_el3_aa32ns_aa64any()
cfdf77b aspeed: Add boot stub for smp booting
=== OUTPUT BEGIN ===
1/34 Checking commit cfdf77bca19f (aspeed: Add boot stub for smp booting)
2/34 Checking commit 39850d0702c1 (target/arm: Drop access_el3_aa32ns_aa64any())
3/34 Checking commit 188b075af0c6 (aspeed: Support AST2600A1 silicon revision)
4/34 Checking commit cdfa8784a707 (aspeed: sdmc: Implement AST2600 locking behaviour)
WARNING: line over 80 characters
#55: FILE: hw/misc/aspeed_sdmc.c:319:
+ s->regs[reg] = (data == PROT_KEY_UNLOCK) ? PROT_UNLOCKED : PROT_SOFTLOCKED;
WARNING: line over 80 characters
#72: FILE: hw/misc/aspeed_sdmc.c:377:
+ s->regs[reg] = (data == PROT_KEY_UNLOCK) ? PROT_UNLOCKED : PROT_SOFTLOCKED;
WARNING: line over 80 characters
#89: FILE: hw/misc/aspeed_sdmc.c:443:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: SDMC is locked until system reset!\n",
total: 0 errors, 3 warnings, 87 lines checked
Patch 4/34 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
5/34 Checking commit 7cdf7df779d5 (hw/arm/nrf51: Add NRF51_PERIPHERAL_SIZE definition)
6/34 Checking commit 1ab873079bf9 (hw/timer/nrf51_timer: Display timer ID in trace events)
7/34 Checking commit 3991effa9b6b (hw/timer/nrf51_timer: Add trace event of counter value update)
8/34 Checking commit 242ddfc7ed54 (exec: Add block comments for watchpoint routines)
9/34 Checking commit e0d523194cd2 (exec: Fix cpu_watchpoint_address_matches address length)
10/34 Checking commit 614fa6a6fae8 (accel/tcg: Add block comment for probe_access)
11/34 Checking commit c10fe3ec0a64 (accel/tcg: Adjust probe_access call to page_check_range)
12/34 Checking commit 224ecf552a2b (accel/tcg: Add probe_access_flags)
13/34 Checking commit 4f7c0fe71952 (accel/tcg: Add endian-specific cpu_{ld, st}* operations)
14/34 Checking commit d9b5d7d5be19 (target/arm: Use cpu_*_data_ra for sve_ldst_tlb_fn)
ERROR: spaces required around that '*' (ctx:VxV)
#65: FILE: target/arm/sve_helper.c:4029:
+ TLB(env, addr, (TYPEM)*(TYPEE *)(vd + H(reg_off)), ra); \
^
ERROR: spaces required around that '*' (ctx:WxV)
#155: FILE: target/arm/sve_helper.c:4162:
+ sve_ldst1_tlb_fn *tlb_fn)
^
total: 2 errors, 0 warnings, 455 lines checked
Patch 14/34 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
15/34 Checking commit 9efa4b5ee7d6 (target/arm: Drop manual handling of set/clear_helper_retaddr)
16/34 Checking commit 7feb92f0d11c (target/arm: Add sve infrastructure for page lookup)
WARNING: Block comments use a leading /* on a separate line
#34: FILE: target/arm/sve_helper.c:1633:
+/* Big-endian hosts need to frob the byte indices. If the copy
total: 0 errors, 1 warnings, 281 lines checked
Patch 16/34 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
17/34 Checking commit e5540d612369 (target/arm: Adjust interface of sve_ld1_host_fn)
18/34 Checking commit ad4a669635e4 (target/arm: Use SVEContLdSt in sve_ld1_r)
19/34 Checking commit bb5288aedcee (target/arm: Handle watchpoints in sve_ld1_r)
20/34 Checking commit 7e60f45c72a9 (target/arm: Use SVEContLdSt for multi-register contiguous loads)
21/34 Checking commit 14753d799ca0 (target/arm: Update contiguous first-fault and no-fault loads)
22/34 Checking commit 0036b7386e67 (target/arm: Use SVEContLdSt for contiguous stores)
23/34 Checking commit f189a3cb6bb4 (target/arm: Reuse sve_probe_page for gather first-fault loads)
24/34 Checking commit a9d5f8cc29ab (target/arm: Reuse sve_probe_page for scatter stores)
25/34 Checking commit 4c621648b45c (target/arm: Reuse sve_probe_page for gather loads)
26/34 Checking commit e1812d5c4e69 (target/arm: Remove sve_memopidx)
27/34 Checking commit 35800561704a (target/arm/kvm: Inline set_feature() calls)
28/34 Checking commit ae7d2bb1441d (target/arm: Make set_feature() available for other files)
29/34 Checking commit 155a4fc01861 (target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[])
30/34 Checking commit ea192ebb3a2a (target/arm/cpu: Restrict v8M IDAU interface to Aarch32 CPUs)
31/34 Checking commit 25a82de56c7f (target/arm: Restrict TCG cpus to TCG accel)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#698:
new file mode 100644
total: 0 errors, 1 warnings, 1333 lines checked
Patch 31/34 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
32/34 Checking commit 7b2835e18978 (hw/arm/musicpal: Map the UART devices unconditionally)
33/34 Checking commit cfaddf9fd5e1 (target/arm: Use tcg_gen_gvec_5_ptr for sve FMLA/FCMLA)
34/34 Checking commit 9dfe2c2a2aec (target/arm: Fix tcg_gen_gvec_dup_imm vs DUP (indexed))
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/20200511133405.5275-1-peter.maydell@linaro.org/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PULL 00/34] target-arm queue
2020-05-11 14:03 ` Peter Maydell
@ 2020-05-11 14:25 ` Peter Maydell
0 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2020-05-11 14:25 UTC (permalink / raw)
To: QEMU Developers, Richard Henderson
On Mon, 11 May 2020 at 15:03, Peter Maydell <peter.maydell@linaro.org> wrote:
> Hmm. I get this link failure, but only on non-x86 hosts
> (aarch64, ppc, s390 [aarch32 ran into a temporary connectivity
> problem and didn't run]):
>
> linux-user/vm86.o: In function `do_int':
> /home/pm/qemu/linux-user/vm86.c:224: undefined reference to `cpu_ldl_data'
This seems to be because we're using a stale vm86.o (if you touch
linux-user/vm86.c then the build succeeds), which is in turn
because the build tree has i386-linux-user/linux-user/vm86.o but
no i386-linux-user/linux-user/vm86.d so it has no dependency
file to tell it that the header change means the object file
needs rebuilding. I have no idea how a build tree could get into
that state -- half the .o files in the i386-linux-user/linux-user/
directory have no .d, but half do...
thanks
-- PMM
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PULL 00/34] target-arm queue
2020-05-11 13:33 Peter Maydell
@ 2020-05-11 14:03 ` Peter Maydell
2020-05-11 14:25 ` Peter Maydell
2020-05-11 15:17 ` no-reply
2020-05-11 15:44 ` Peter Maydell
2 siblings, 1 reply; 46+ messages in thread
From: Peter Maydell @ 2020-05-11 14:03 UTC (permalink / raw)
To: QEMU Developers, Richard Henderson
On Mon, 11 May 2020 at 14:34, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> The following changes since commit c88f1ffc19e38008a1c33ae039482a860aa7418c:
>
> Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging (2020-05-08 14:29:18 +0100)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200511
>
> for you to fetch changes up to 7e17d50ebd359ee5fa3d65d7fdc0fe0336d60694:
>
> target/arm: Fix tcg_gen_gvec_dup_imm vs DUP (indexed) (2020-05-11 14:22:54 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
> aspeed: Add boot stub for smp booting
> target/arm: Drop access_el3_aa32ns_aa64any()
> aspeed: Support AST2600A1 silicon revision
> aspeed: sdmc: Implement AST2600 locking behaviour
> nrf51: Tracing cleanups
> target/arm: Improve handling of SVE loads and stores
> target/arm: Don't show TCG-only CPUs in KVM-only QEMU builds
> hw/arm/musicpal: Map the UART devices unconditionally
> target/arm: Fix tcg_gen_gvec_dup_imm vs DUP (indexed)
> target/arm: Use tcg_gen_gvec_5_ptr for sve FMLA/FCMLA
Hmm. I get this link failure, but only on non-x86 hosts
(aarch64, ppc, s390 [aarch32 ran into a temporary connectivity
problem and didn't run]):
linux-user/vm86.o: In function `do_int':
/home/pm/qemu/linux-user/vm86.c:224: undefined reference to `cpu_ldl_data'
linux-user/vm86.o: In function `vm_putw':
/home/pm/qemu/linux-user/vm86.c:46: undefined reference to `cpu_stw_data'
/home/pm/qemu/linux-user/vm86.c:46: undefined reference to `cpu_stw_data'
/home/pm/qemu/linux-user/vm86.c:46: undefined reference to `cpu_stw_data'
linux-user/vm86.o: In function `vm_getl':
/home/pm/qemu/linux-user/vm86.c:70: undefined reference to `cpu_ldl_data'
/home/pm/qemu/linux-user/vm86.c:70: undefined reference to `cpu_ldl_data'
/home/pm/qemu/linux-user/vm86.c:70: undefined reference to `cpu_ldl_data'
/home/pm/qemu/linux-user/vm86.c:70: undefined reference to `cpu_ldl_data'
linux-user/vm86.o: In function `vm_putl':
/home/pm/qemu/linux-user/vm86.c:52: undefined reference to `cpu_stl_data'
linux-user/vm86.o: In function `vm_putw':
/home/pm/qemu/linux-user/vm86.c:46: undefined reference to `cpu_stw_data'
linux-user/vm86.o: In function `vm_getw':
/home/pm/qemu/linux-user/vm86.c:64: undefined reference to `cpu_lduw_data'
/home/pm/qemu/linux-user/vm86.c:64: undefined reference to `cpu_lduw_data'
/home/pm/qemu/linux-user/vm86.c:64: undefined reference to `cpu_lduw_data'
/home/pm/qemu/linux-user/vm86.c:64: undefined reference to `cpu_lduw_data'
collect2: error: ld returned 1 exit status
Makefile:208: recipe for target 'qemu-i386' failed
Any idea what's going on here, Richard? Presumably it's fallout
from some change in the sve-loads-and-stores patchset...
thanks
-- PMM
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PULL 00/34] target-arm queue
@ 2020-05-11 13:33 Peter Maydell
2020-05-11 14:03 ` Peter Maydell
` (2 more replies)
0 siblings, 3 replies; 46+ messages in thread
From: Peter Maydell @ 2020-05-11 13:33 UTC (permalink / raw)
To: qemu-devel
The following changes since commit c88f1ffc19e38008a1c33ae039482a860aa7418c:
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging (2020-05-08 14:29:18 +0100)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200511
for you to fetch changes up to 7e17d50ebd359ee5fa3d65d7fdc0fe0336d60694:
target/arm: Fix tcg_gen_gvec_dup_imm vs DUP (indexed) (2020-05-11 14:22:54 +0100)
----------------------------------------------------------------
target-arm queue:
aspeed: Add boot stub for smp booting
target/arm: Drop access_el3_aa32ns_aa64any()
aspeed: Support AST2600A1 silicon revision
aspeed: sdmc: Implement AST2600 locking behaviour
nrf51: Tracing cleanups
target/arm: Improve handling of SVE loads and stores
target/arm: Don't show TCG-only CPUs in KVM-only QEMU builds
hw/arm/musicpal: Map the UART devices unconditionally
target/arm: Fix tcg_gen_gvec_dup_imm vs DUP (indexed)
target/arm: Use tcg_gen_gvec_5_ptr for sve FMLA/FCMLA
----------------------------------------------------------------
Edgar E. Iglesias (1):
target/arm: Drop access_el3_aa32ns_aa64any()
Joel Stanley (3):
aspeed: Add boot stub for smp booting
aspeed: Support AST2600A1 silicon revision
aspeed: sdmc: Implement AST2600 locking behaviour
Philippe Mathieu-Daudé (8):
hw/arm/nrf51: Add NRF51_PERIPHERAL_SIZE definition
hw/timer/nrf51_timer: Display timer ID in trace events
hw/timer/nrf51_timer: Add trace event of counter value update
target/arm/kvm: Inline set_feature() calls
target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[]
target/arm/cpu: Restrict v8M IDAU interface to Aarch32 CPUs
target/arm: Restrict TCG cpus to TCG accel
hw/arm/musicpal: Map the UART devices unconditionally
Richard Henderson (21):
exec: Add block comments for watchpoint routines
exec: Fix cpu_watchpoint_address_matches address length
accel/tcg: Add block comment for probe_access
accel/tcg: Adjust probe_access call to page_check_range
accel/tcg: Add probe_access_flags
accel/tcg: Add endian-specific cpu_{ld, st}* operations
target/arm: Use cpu_*_data_ra for sve_ldst_tlb_fn
target/arm: Drop manual handling of set/clear_helper_retaddr
target/arm: Add sve infrastructure for page lookup
target/arm: Adjust interface of sve_ld1_host_fn
target/arm: Use SVEContLdSt in sve_ld1_r
target/arm: Handle watchpoints in sve_ld1_r
target/arm: Use SVEContLdSt for multi-register contiguous loads
target/arm: Update contiguous first-fault and no-fault loads
target/arm: Use SVEContLdSt for contiguous stores
target/arm: Reuse sve_probe_page for gather first-fault loads
target/arm: Reuse sve_probe_page for scatter stores
target/arm: Reuse sve_probe_page for gather loads
target/arm: Remove sve_memopidx
target/arm: Use tcg_gen_gvec_5_ptr for sve FMLA/FCMLA
target/arm: Fix tcg_gen_gvec_dup_imm vs DUP (indexed)
Thomas Huth (1):
target/arm: Make set_feature() available for other files
docs/devel/loads-stores.rst | 39 +-
include/exec/cpu-all.h | 13 +-
include/exec/cpu_ldst.h | 283 +++--
include/exec/exec-all.h | 39 +
include/hw/arm/nrf51.h | 3 +-
include/hw/core/cpu.h | 23 +
include/hw/i2c/microbit_i2c.h | 2 +-
include/hw/misc/aspeed_scu.h | 1 +
include/hw/timer/nrf51_timer.h | 1 +
target/arm/cpu.h | 10 +
target/arm/helper-sve.h | 45 +-
target/arm/internals.h | 5 -
accel/tcg/cputlb.c | 413 ++++---
accel/tcg/user-exec.c | 256 ++++-
exec.c | 2 +-
hw/arm/aspeed.c | 73 +-
hw/arm/aspeed_ast2600.c | 6 +-
hw/arm/musicpal.c | 12 +-
hw/arm/nrf51_soc.c | 9 +-
hw/i2c/microbit_i2c.c | 2 +-
hw/misc/aspeed_scu.c | 11 +-
hw/misc/aspeed_sdmc.c | 55 +-
hw/timer/nrf51_timer.c | 14 +-
target/arm/cpu.c | 662 +----------
target/arm/cpu64.c | 18 +-
target/arm/cpu_tcg.c | 664 +++++++++++
target/arm/helper.c | 30 +-
target/arm/kvm32.c | 13 +-
target/arm/kvm64.c | 22 +-
target/arm/sve_helper.c | 2398 +++++++++++++++++++++-------------------
target/arm/translate-sve.c | 93 +-
hw/timer/trace-events | 5 +-
target/arm/Makefile.objs | 1 +
33 files changed, 2975 insertions(+), 2248 deletions(-)
create mode 100644 target/arm/cpu_tcg.c
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PULL 00/34] target-arm queue
2019-12-16 11:08 Peter Maydell
@ 2019-12-16 14:07 ` Peter Maydell
0 siblings, 0 replies; 46+ messages in thread
From: Peter Maydell @ 2019-12-16 14:07 UTC (permalink / raw)
To: QEMU Developers
On Mon, 16 Dec 2019 at 11:09, Peter Maydell <peter.maydell@linaro.org> wrote:
>
>
> First arm pullreq of 5.0!
>
> The following changes since commit 084a398bf8aa7634738e6c6c0103236ee1b3b72f:
>
> Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging (2019-12-13 18:14:07 +0000)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20191216-1
>
> for you to fetch changes up to f80741d107673f162e3b097fc76a1590036cc9d1:
>
> target/arm: ensure we use current exception state after SCR update (2019-12-16 10:52:58 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
> * Add support for Cortex-M7 CPU
> * exynos4210_gic: Suppress gcc9 format-truncation warnings
> * aspeed: Various minor bug fixes and improvements
> * aspeed: Add support for the tacoma-bmc board
> * Honour HCR_EL32.TID1 and .TID2 trapping requirements
> * Handle trapping to EL2 of AArch32 VMRS instructions
> * Handle AArch32 CP15 trapping via HSTR_EL2
> * Add support for missing Jazelle system registers
> * arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on
> * Add support for DC CVAP & DC CVADP instructions
> * Fix assertion when SCR.NS is changed in Secure-SVC &c
> * enable SHPC native hot plug in arm ACPI
>
> ----------------------------------------------------------------
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/5.0
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PULL 00/34] target-arm queue
@ 2019-12-16 11:08 Peter Maydell
2019-12-16 14:07 ` Peter Maydell
0 siblings, 1 reply; 46+ messages in thread
From: Peter Maydell @ 2019-12-16 11:08 UTC (permalink / raw)
To: qemu-devel
First arm pullreq of 5.0!
The following changes since commit 084a398bf8aa7634738e6c6c0103236ee1b3b72f:
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging (2019-12-13 18:14:07 +0000)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20191216-1
for you to fetch changes up to f80741d107673f162e3b097fc76a1590036cc9d1:
target/arm: ensure we use current exception state after SCR update (2019-12-16 10:52:58 +0000)
----------------------------------------------------------------
target-arm queue:
* Add support for Cortex-M7 CPU
* exynos4210_gic: Suppress gcc9 format-truncation warnings
* aspeed: Various minor bug fixes and improvements
* aspeed: Add support for the tacoma-bmc board
* Honour HCR_EL32.TID1 and .TID2 trapping requirements
* Handle trapping to EL2 of AArch32 VMRS instructions
* Handle AArch32 CP15 trapping via HSTR_EL2
* Add support for missing Jazelle system registers
* arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on
* Add support for DC CVAP & DC CVADP instructions
* Fix assertion when SCR.NS is changed in Secure-SVC &c
* enable SHPC native hot plug in arm ACPI
----------------------------------------------------------------
Alex Bennée (1):
target/arm: ensure we use current exception state after SCR update
Beata Michalska (4):
tcg: cputlb: Add probe_read
Memory: Enable writeback for given memory region
migration: ram: Switch to ram block writeback
target/arm: Add support for DC CVAP & DC CVADP ins
Christophe Lyon (1):
target/arm: Add support for cortex-m7 CPU
Cédric Le Goater (12):
aspeed/i2c: Add support for pool buffer transfers
aspeed/i2c: Check SRAM enablement on AST2500
aspeed: Add a DRAM memory region at the SoC level
aspeed/i2c: Add support for DMA transfers
aspeed/i2c: Add trace events
aspeed/smc: Restore default AHB window mapping at reset
aspeed/smc: Do not map disabled segment on the AST2600
aspeed/smc: Add AST2600 timings registers
aspeed: Remove AspeedBoardConfig array and use AspeedMachineClass
aspeed: Add support for the tacoma-bmc board
aspeed: Change the "scu" property definition
aspeed: Change the "nic" property definition
David Gibson (1):
exynos4210_gic: Suppress gcc9 format-truncation warnings
Heyi Guo (2):
hw/arm/acpi: simplify AML bit and/or statement
hw/arm/acpi: enable SHPC native hot plug
Joel Stanley (4):
aspeed/sdmc: Make ast2600 default 1G
aspeed/scu: Fix W1C behavior
watchdog/aspeed: Improve watchdog timeout message
watchdog/aspeed: Fix AST2600 frequency behaviour
Marc Zyngier (5):
target/arm: Honor HCR_EL2.TID2 trapping requirements
target/arm: Honor HCR_EL2.TID1 trapping requirements
target/arm: Handle trapping to EL2 of AArch32 VMRS instructions
target/arm: Handle AArch32 CP15 trapping via HSTR_EL2
target/arm: Add support for missing Jazelle system registers
Niek Linnenbank (1):
arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on()
PanNengyuan (1):
gpio: fix memory leak in aspeed_gpio_init()
Philippe Mathieu-Daudé (2):
hw/arm/sbsa-ref: Simplify by moving the gic in the machine state
hw/arm/virt: Simplify by moving the gic in the machine state
include/exec/exec-all.h | 6 +
include/exec/memory.h | 6 +
include/exec/ram_addr.h | 8 +
include/hw/arm/aspeed.h | 24 +--
include/hw/arm/aspeed_soc.h | 1 +
include/hw/arm/virt.h | 1 +
include/hw/i2c/aspeed_i2c.h | 16 ++
include/hw/ssi/aspeed_smc.h | 1 +
include/hw/watchdog/wdt_aspeed.h | 1 +
include/qemu/cutils.h | 1 +
target/arm/cpu.h | 20 +-
target/arm/helper.h | 3 +
target/arm/translate.h | 2 +
exec.c | 36 ++++
hw/arm/aspeed.c | 271 +++++++++++++----------
hw/arm/aspeed_ast2600.c | 25 ++-
hw/arm/aspeed_soc.c | 22 +-
hw/arm/sbsa-ref.c | 86 ++++----
hw/arm/virt-acpi-build.c | 21 +-
hw/arm/virt.c | 109 +++++-----
hw/gpio/aspeed_gpio.c | 1 +
hw/i2c/aspeed_i2c.c | 439 +++++++++++++++++++++++++++++++++++---
hw/intc/exynos4210_gic.c | 9 +-
hw/misc/aspeed_scu.c | 19 +-
hw/misc/aspeed_sdmc.c | 6 +-
hw/net/ftgmac100.c | 19 +-
hw/ssi/aspeed_smc.c | 63 ++++--
hw/timer/aspeed_timer.c | 17 +-
hw/watchdog/wdt_aspeed.c | 41 ++--
linux-user/elfload.c | 2 +
memory.c | 12 ++
migration/ram.c | 5 +-
target/arm/arm-powerctl.c | 3 +
target/arm/cpu.c | 33 +++
target/arm/cpu64.c | 1 +
target/arm/helper.c | 170 ++++++++++++++-
target/arm/op_helper.c | 22 ++
target/arm/translate-vfp.inc.c | 20 +-
target/arm/translate.c | 9 +-
target/arm/vfp_helper.c | 29 +++
util/cutils.c | 38 ++++
hw/i2c/trace-events | 9 +
tests/data/acpi/virt/DSDT | Bin 18470 -> 18462 bytes
tests/data/acpi/virt/DSDT.memhp | Bin 19807 -> 19799 bytes
tests/data/acpi/virt/DSDT.numamem | Bin 18470 -> 18462 bytes
45 files changed, 1273 insertions(+), 354 deletions(-)
^ permalink raw reply [flat|nested] 46+ messages in thread
end of thread, other threads:[~2023-01-06 12:12 UTC | newest]
Thread overview: 46+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-05 16:43 [PULL 00/34] target-arm queue Peter Maydell
2023-01-05 16:43 ` [PULL 01/34] target/arm:Set lg_page_size to 0 if either S1 or S2 asks for it Peter Maydell
2023-01-05 16:43 ` [PULL 02/34] target/arm: Don't add all MIDR aliases for cores that implement PMSA Peter Maydell
2023-01-05 16:43 ` [PULL 03/34] target/arm: Make RVBAR available for all ARMv8 CPUs Peter Maydell
2023-01-05 16:43 ` [PULL 04/34] target/arm: Make stage_2_format for cache attributes optional Peter Maydell
2023-01-05 16:43 ` [PULL 05/34] target/arm: Enable TTBCR_EAE for ARMv8-R AArch32 Peter Maydell
2023-01-05 16:43 ` [PULL 06/34] target/arm: Add PMSAv8r registers Peter Maydell
2023-01-05 16:43 ` [PULL 07/34] target/arm: Add PMSAv8r functionality Peter Maydell
2023-01-05 16:43 ` [PULL 08/34] target/arm: Add ARM Cortex-R52 CPU Peter Maydell
2023-01-05 16:43 ` [PULL 09/34] target/arm: fix handling of HLT semihosting in system mode Peter Maydell
2023-01-05 16:43 ` [PULL 10/34] hw/timer/imx_epit: improve comments Peter Maydell
2023-01-05 16:43 ` [PULL 11/34] hw/timer/imx_epit: cleanup CR defines Peter Maydell
2023-01-05 16:43 ` [PULL 12/34] hw/timer/imx_epit: define SR_OCIF Peter Maydell
2023-01-05 16:43 ` [PULL 13/34] hw/timer/imx_epit: update interrupt state on CR write access Peter Maydell
2023-01-05 16:43 ` [PULL 14/34] hw/timer/imx_epit: hard reset initializes CR with 0 Peter Maydell
2023-01-05 16:43 ` [PULL 15/34] hw/timer/imx_epit: factor out register write handlers Peter Maydell
2023-01-05 16:43 ` [PULL 16/34] hw/timer/imx_epit: remove explicit fields cnt and freq Peter Maydell
2023-01-05 16:44 ` [PULL 17/34] hw/timer/imx_epit: fix compare timer handling Peter Maydell
2023-01-05 16:44 ` [PULL 18/34] target/arm: Fix checkpatch comment style warnings in helper.c Peter Maydell
2023-01-05 16:44 ` [PULL 19/34] target/arm: Fix checkpatch space errors " Peter Maydell
2023-01-05 16:44 ` [PULL 20/34] target/arm: Fix checkpatch brace " Peter Maydell
2023-01-05 16:44 ` [PULL 21/34] target/arm: Remove unused includes from m_helper.c Peter Maydell
2023-01-05 16:44 ` [PULL 22/34] target/arm: Remove unused includes from helper.c Peter Maydell
2023-01-05 16:44 ` [PULL 23/34] target/arm: cleanup cpu includes Peter Maydell
2023-01-05 16:44 ` [PULL 24/34] hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo arg Peter Maydell
2023-01-05 16:44 ` [PULL 25/34] hw/arm/nseries: Constify various read-only arrays Peter Maydell
2023-01-05 16:44 ` [PULL 26/34] hw/arm/nseries: Silent -Wmissing-field-initializers warning Peter Maydell
2023-01-05 16:44 ` [PULL 27/34] target/arm: align exposed ID registers with Linux Peter Maydell
2023-01-05 16:44 ` [PULL 28/34] hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scope Peter Maydell
2023-01-05 16:44 ` [PULL 29/34] hw/arm/smmu-common: Avoid using inlined functions with external linkage Peter Maydell
2023-01-05 16:44 ` [PULL 30/34] i.MX7D: Connect GPT timers to IRQ Peter Maydell
2023-01-05 16:44 ` [PULL 31/34] i.MX7D: Compute clock frequency for the fixed frequency clocks Peter Maydell
2023-01-05 16:44 ` [PULL 32/34] i.MX6UL: Add a specific GPT timer instance for the i.MX6UL Peter Maydell
2023-01-05 16:44 ` [PULL 33/34] i.MX7D: Connect IRQs to GPIO devices Peter Maydell
2023-01-05 16:44 ` [PULL 34/34] hw/net: Fix read of uninitialized memory in imx_fec Peter Maydell
2023-01-06 12:10 ` [PULL 00/34] target-arm queue Peter Maydell
-- strict thread matches above, loose matches on Subject: below --
2020-07-03 16:53 Peter Maydell
2020-07-03 17:50 ` no-reply
2020-07-04 17:43 ` Peter Maydell
2020-05-11 13:33 Peter Maydell
2020-05-11 14:03 ` Peter Maydell
2020-05-11 14:25 ` Peter Maydell
2020-05-11 15:17 ` no-reply
2020-05-11 15:44 ` Peter Maydell
2019-12-16 11:08 Peter Maydell
2019-12-16 14:07 ` Peter Maydell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.