[PATCH v2 0/9] re-enable DAX PMD support

[PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
locking.  This series allows DAX PMDs to participate in the DAX radix tree
based locking scheme so that they can be re-enabled.

Changes since v1:
 - PMD entry locking is now done based on the starting offset of the PMD
   entry, rather than on the radix tree slot which was unreliable. (Jan)
 - Fixed the one issue I could find with hole punch.  As far as I can tell
   hole punch now works correctly for both PMD and PTE DAX entries, 4k zero
   pages and huge zero pages.
 - Fixed the way that ext2 returns the size of holes in ext2_get_block().
   (Jan)
 - Made the 'wait_table' global variable static in respnse to a sparse
   warning.
 - Fixed some more inconsitent usage between the names 'ret' and 'entry'
   for radix tree entry variables.

Ross Zwisler (9):
  ext4: allow DAX writeback for hole punch
  ext2: tell DAX the size of allocation holes
  ext4: tell DAX the size of allocation holes
  dax: remove buffer_size_valid()
  dax: make 'wait_table' global variable static
  dax: consistent variable naming for DAX entries
  dax: coordinate locking for offsets in PMD range
  dax: re-enable DAX PMD support
  dax: remove "depends on BROKEN" from FS_DAX_PMD

 fs/Kconfig          |   1 -
 fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------------------
 fs/ext2/inode.c     |   3 +
 fs/ext4/inode.c     |   7 +-
 include/linux/dax.h |  29 ++++-
 mm/filemap.c        |   6 +-
 6 files changed, 201 insertions(+), 142 deletions(-)

-- 
2.9.0

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

[PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
locking.  This series allows DAX PMDs to participate in the DAX radix tree
based locking scheme so that they can be re-enabled.

Changes since v1:
 - PMD entry locking is now done based on the starting offset of the PMD
   entry, rather than on the radix tree slot which was unreliable. (Jan)
 - Fixed the one issue I could find with hole punch.  As far as I can tell
   hole punch now works correctly for both PMD and PTE DAX entries, 4k zero
   pages and huge zero pages.
 - Fixed the way that ext2 returns the size of holes in ext2_get_block().
   (Jan)
 - Made the 'wait_table' global variable static in respnse to a sparse
   warning.
 - Fixed some more inconsitent usage between the names 'ret' and 'entry'
   for radix tree entry variables.

Ross Zwisler (9):
  ext4: allow DAX writeback for hole punch
  ext2: tell DAX the size of allocation holes
  ext4: tell DAX the size of allocation holes
  dax: remove buffer_size_valid()
  dax: make 'wait_table' global variable static
  dax: consistent variable naming for DAX entries
  dax: coordinate locking for offsets in PMD range
  dax: re-enable DAX PMD support
  dax: remove "depends on BROKEN" from FS_DAX_PMD

 fs/Kconfig          |   1 -
 fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------------------
 fs/ext2/inode.c     |   3 +
 fs/ext4/inode.c     |   7 +-
 include/linux/dax.h |  29 ++++-
 mm/filemap.c        |   6 +-
 6 files changed, 201 insertions(+), 142 deletions(-)

-- 
2.9.0

[PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
locking.  This series allows DAX PMDs to participate in the DAX radix tree
based locking scheme so that they can be re-enabled.

Changes since v1:
 - PMD entry locking is now done based on the starting offset of the PMD
   entry, rather than on the radix tree slot which was unreliable. (Jan)
 - Fixed the one issue I could find with hole punch.  As far as I can tell
   hole punch now works correctly for both PMD and PTE DAX entries, 4k zero
   pages and huge zero pages.
 - Fixed the way that ext2 returns the size of holes in ext2_get_block().
   (Jan)
 - Made the 'wait_table' global variable static in respnse to a sparse
   warning.
 - Fixed some more inconsitent usage between the names 'ret' and 'entry'
   for radix tree entry variables.

Ross Zwisler (9):
  ext4: allow DAX writeback for hole punch
  ext2: tell DAX the size of allocation holes
  ext4: tell DAX the size of allocation holes
  dax: remove buffer_size_valid()
  dax: make 'wait_table' global variable static
  dax: consistent variable naming for DAX entries
  dax: coordinate locking for offsets in PMD range
  dax: re-enable DAX PMD support
  dax: remove "depends on BROKEN" from FS_DAX_PMD

 fs/Kconfig          |   1 -
 fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------------------
 fs/ext2/inode.c     |   3 +
 fs/ext4/inode.c     |   7 +-
 include/linux/dax.h |  29 ++++-
 mm/filemap.c        |   6 +-
 6 files changed, 201 insertions(+), 142 deletions(-)

-- 
2.9.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
locking.  This series allows DAX PMDs to participate in the DAX radix tree
based locking scheme so that they can be re-enabled.

Changes since v1:
 - PMD entry locking is now done based on the starting offset of the PMD
   entry, rather than on the radix tree slot which was unreliable. (Jan)
 - Fixed the one issue I could find with hole punch.  As far as I can tell
   hole punch now works correctly for both PMD and PTE DAX entries, 4k zero
   pages and huge zero pages.
 - Fixed the way that ext2 returns the size of holes in ext2_get_block().
   (Jan)
 - Made the 'wait_table' global variable static in respnse to a sparse
   warning.
 - Fixed some more inconsitent usage between the names 'ret' and 'entry'
   for radix tree entry variables.

Ross Zwisler (9):
  ext4: allow DAX writeback for hole punch
  ext2: tell DAX the size of allocation holes
  ext4: tell DAX the size of allocation holes
  dax: remove buffer_size_valid()
  dax: make 'wait_table' global variable static
  dax: consistent variable naming for DAX entries
  dax: coordinate locking for offsets in PMD range
  dax: re-enable DAX PMD support
  dax: remove "depends on BROKEN" from FS_DAX_PMD

 fs/Kconfig          |   1 -
 fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------------------
 fs/ext2/inode.c     |   3 +
 fs/ext4/inode.c     |   7 +-
 include/linux/dax.h |  29 ++++-
 mm/filemap.c        |   6 +-
 6 files changed, 201 insertions(+), 142 deletions(-)

-- 
2.9.0

[PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Ross Zwisler]

Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
This is because the logic around filemap_write_and_wait_range() in
ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
not for dirty DAX exceptional entries.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
---
 fs/ext4/inode.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 3131747..0900cb4 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
 }
 
 /*
- * ext4_punch_hole: punches a hole in a file by releaseing the blocks
+ * ext4_punch_hole: punches a hole in a file by releasing the blocks
  * associated with the given offset and length
  *
  * @inode:  File inode
@@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
 	 * Write out all dirty pages to avoid race conditions
 	 * Then release them.
 	 */
-	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
+	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
 		ret = filemap_write_and_wait_range(mapping, offset,
 						   offset + length - 1);
 		if (ret)
-- 
2.9.0

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

[PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Ross Zwisler]

Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
This is because the logic around filemap_write_and_wait_range() in
ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
not for dirty DAX exceptional entries.

Signed-off-by: Ross Zwisler <ross.zwisler-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Reviewed-by: Jan Kara <jack-AlSwsSmVLrQ@public.gmane.org>
Cc: <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
---
 fs/ext4/inode.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 3131747..0900cb4 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
 }
 
 /*
- * ext4_punch_hole: punches a hole in a file by releaseing the blocks
+ * ext4_punch_hole: punches a hole in a file by releasing the blocks
  * associated with the given offset and length
  *
  * @inode:  File inode
@@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
 	 * Write out all dirty pages to avoid race conditions
 	 * Then release them.
 	 */
-	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
+	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
 		ret = filemap_write_and_wait_range(mapping, offset,
 						   offset + length - 1);
 		if (ret)
-- 
2.9.0

[PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Ross Zwisler]

Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
This is because the logic around filemap_write_and_wait_range() in
ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
not for dirty DAX exceptional entries.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
---
 fs/ext4/inode.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 3131747..0900cb4 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
 }
 
 /*
- * ext4_punch_hole: punches a hole in a file by releaseing the blocks
+ * ext4_punch_hole: punches a hole in a file by releasing the blocks
  * associated with the given offset and length
  *
  * @inode:  File inode
@@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
 	 * Write out all dirty pages to avoid race conditions
 	 * Then release them.
 	 */
-	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
+	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
 		ret = filemap_write_and_wait_range(mapping, offset,
 						   offset + length - 1);
 		if (ret)
-- 
2.9.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Ross Zwisler]

Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
This is because the logic around filemap_write_and_wait_range() in
ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
not for dirty DAX exceptional entries.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
---
 fs/ext4/inode.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 3131747..0900cb4 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
 }
 
 /*
- * ext4_punch_hole: punches a hole in a file by releaseing the blocks
+ * ext4_punch_hole: punches a hole in a file by releasing the blocks
  * associated with the given offset and length
  *
  * @inode:  File inode
@@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
 	 * Write out all dirty pages to avoid race conditions
 	 * Then release them.
 	 */
-	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
+	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
 		ret = filemap_write_and_wait_range(mapping, offset,
 						   offset + length - 1);
 		if (ret)
-- 
2.9.0

Re: [PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Ross Zwisler]

On Tue, Aug 23, 2016 at 04:04:11PM -0600, Ross Zwisler wrote:
> Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
> This is because the logic around filemap_write_and_wait_range() in
> ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
> not for dirty DAX exceptional entries.
> 
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> Reviewed-by: Jan Kara <jack@suse.cz>
> Cc: <stable@vger.kernel.org>

Ted & Jan,

I'm still working on the latest version of the PMD work which integrates with
the new struct iomap faults.  At this point it doesn't look like I'm going to
make v4.9, but I think that this bug fix at least should probably go in alone?

Thanks,
- Ross

> ---
>  fs/ext4/inode.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 3131747..0900cb4 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
>  }
>  
>  /*
> - * ext4_punch_hole: punches a hole in a file by releaseing the blocks
> + * ext4_punch_hole: punches a hole in a file by releasing the blocks
>   * associated with the given offset and length
>   *
>   * @inode:  File inode
> @@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
>  	 * Write out all dirty pages to avoid race conditions
>  	 * Then release them.
>  	 */
> -	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> +	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
>  		ret = filemap_write_and_wait_range(mapping, offset,
>  						   offset + length - 1);
>  		if (ret)
> -- 
> 2.9.0
> 
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

Re: [PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Ross Zwisler]

On Tue, Aug 23, 2016 at 04:04:11PM -0600, Ross Zwisler wrote:
> Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
> This is because the logic around filemap_write_and_wait_range() in
> ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
> not for dirty DAX exceptional entries.
> 
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> Reviewed-by: Jan Kara <jack@suse.cz>
> Cc: <stable@vger.kernel.org>

Ted & Jan,

I'm still working on the latest version of the PMD work which integrates with
the new struct iomap faults.  At this point it doesn't look like I'm going to
make v4.9, but I think that this bug fix at least should probably go in alone?

Thanks,
- Ross

> ---
>  fs/ext4/inode.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 3131747..0900cb4 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
>  }
>  
>  /*
> - * ext4_punch_hole: punches a hole in a file by releaseing the blocks
> + * ext4_punch_hole: punches a hole in a file by releasing the blocks
>   * associated with the given offset and length
>   *
>   * @inode:  File inode
> @@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
>  	 * Write out all dirty pages to avoid race conditions
>  	 * Then release them.
>  	 */
> -	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> +	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
>  		ret = filemap_write_and_wait_range(mapping, offset,
>  						   offset + length - 1);
>  		if (ret)
> -- 
> 2.9.0
> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Ross Zwisler]

On Tue, Aug 23, 2016 at 04:04:11PM -0600, Ross Zwisler wrote:
> Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
> This is because the logic around filemap_write_and_wait_range() in
> ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
> not for dirty DAX exceptional entries.
> 
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> Reviewed-by: Jan Kara <jack@suse.cz>
> Cc: <stable@vger.kernel.org>

Ted & Jan,

I'm still working on the latest version of the PMD work which integrates with
the new struct iomap faults.  At this point it doesn't look like I'm going to
make v4.9, but I think that this bug fix at least should probably go in alone?

Thanks,
- Ross

> ---
>  fs/ext4/inode.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 3131747..0900cb4 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
>  }
>  
>  /*
> - * ext4_punch_hole: punches a hole in a file by releaseing the blocks
> + * ext4_punch_hole: punches a hole in a file by releasing the blocks
>   * associated with the given offset and length
>   *
>   * @inode:  File inode
> @@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
>  	 * Write out all dirty pages to avoid race conditions
>  	 * Then release them.
>  	 */
> -	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> +	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
>  		ret = filemap_write_and_wait_range(mapping, offset,
>  						   offset + length - 1);
>  		if (ret)
> -- 
> 2.9.0
> 

Re: [PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Ross Zwisler]

On Tue, Aug 23, 2016 at 04:04:11PM -0600, Ross Zwisler wrote:
> Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
> This is because the logic around filemap_write_and_wait_range() in
> ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
> not for dirty DAX exceptional entries.
> 
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> Reviewed-by: Jan Kara <jack@suse.cz>
> Cc: <stable@vger.kernel.org>

Ted & Jan,

I'm still working on the latest version of the PMD work which integrates with
the new struct iomap faults.  At this point it doesn't look like I'm going to
make v4.9, but I think that this bug fix at least should probably go in alone?

Thanks,
- Ross

> ---
>  fs/ext4/inode.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 3131747..0900cb4 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
>  }
>  
>  /*
> - * ext4_punch_hole: punches a hole in a file by releaseing the blocks
> + * ext4_punch_hole: punches a hole in a file by releasing the blocks
>   * associated with the given offset and length
>   *
>   * @inode:  File inode
> @@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
>  	 * Write out all dirty pages to avoid race conditions
>  	 * Then release them.
>  	 */
> -	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> +	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
>  		ret = filemap_write_and_wait_range(mapping, offset,
>  						   offset + length - 1);
>  		if (ret)
> -- 
> 2.9.0
> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Ross Zwisler]

On Tue, Aug 23, 2016 at 04:04:11PM -0600, Ross Zwisler wrote:
> Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
> This is because the logic around filemap_write_and_wait_range() in
> ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
> not for dirty DAX exceptional entries.
> 
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> Reviewed-by: Jan Kara <jack@suse.cz>
> Cc: <stable@vger.kernel.org>

Ted & Jan,

I'm still working on the latest version of the PMD work which integrates with
the new struct iomap faults.  At this point it doesn't look like I'm going to
make v4.9, but I think that this bug fix at least should probably go in alone?

Thanks,
- Ross

> ---
>  fs/ext4/inode.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 3131747..0900cb4 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
>  }
>  
>  /*
> - * ext4_punch_hole: punches a hole in a file by releaseing the blocks
> + * ext4_punch_hole: punches a hole in a file by releasing the blocks
>   * associated with the given offset and length
>   *
>   * @inode:  File inode
> @@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
>  	 * Write out all dirty pages to avoid race conditions
>  	 * Then release them.
>  	 */
> -	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> +	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
>  		ret = filemap_write_and_wait_range(mapping, offset,
>  						   offset + length - 1);
>  		if (ret)
> -- 
> 2.9.0
> 

Re: [PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Jan Kara]

On Wed 21-09-16 09:22:44, Ross Zwisler wrote:
> On Tue, Aug 23, 2016 at 04:04:11PM -0600, Ross Zwisler wrote:
> > Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
> > This is because the logic around filemap_write_and_wait_range() in
> > ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
> > not for dirty DAX exceptional entries.
> > 
> > Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> > Reviewed-by: Jan Kara <jack@suse.cz>
> > Cc: <stable@vger.kernel.org>
> 
> Ted & Jan,
> 
> I'm still working on the latest version of the PMD work which integrates with
> the new struct iomap faults.  At this point it doesn't look like I'm going to
> make v4.9, but I think that this bug fix at least should probably go in alone?

Yeah. Ted, feel free to add:

Reviewed-by: Jan Kara <jack@suse.cz>

and merge this change. Thanks!

								Honza
> >  fs/ext4/inode.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> > index 3131747..0900cb4 100644
> > --- a/fs/ext4/inode.c
> > +++ b/fs/ext4/inode.c
> > @@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
> >  }
> >  
> >  /*
> > - * ext4_punch_hole: punches a hole in a file by releaseing the blocks
> > + * ext4_punch_hole: punches a hole in a file by releasing the blocks
> >   * associated with the given offset and length
> >   *
> >   * @inode:  File inode
> > @@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
> >  	 * Write out all dirty pages to avoid race conditions
> >  	 * Then release them.
> >  	 */
> > -	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> > +	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> >  		ret = filemap_write_and_wait_range(mapping, offset,
> >  						   offset + length - 1);
> >  		if (ret)
> > -- 
> > 2.9.0
> > 
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

Re: [PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Jan Kara]

On Wed 21-09-16 09:22:44, Ross Zwisler wrote:
> On Tue, Aug 23, 2016 at 04:04:11PM -0600, Ross Zwisler wrote:
> > Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
> > This is because the logic around filemap_write_and_wait_range() in
> > ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
> > not for dirty DAX exceptional entries.
> > 
> > Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> > Reviewed-by: Jan Kara <jack@suse.cz>
> > Cc: <stable@vger.kernel.org>
> 
> Ted & Jan,
> 
> I'm still working on the latest version of the PMD work which integrates with
> the new struct iomap faults.  At this point it doesn't look like I'm going to
> make v4.9, but I think that this bug fix at least should probably go in alone?

Yeah. Ted, feel free to add:

Reviewed-by: Jan Kara <jack@suse.cz>

and merge this change. Thanks!

								Honza
> >  fs/ext4/inode.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> > index 3131747..0900cb4 100644
> > --- a/fs/ext4/inode.c
> > +++ b/fs/ext4/inode.c
> > @@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
> >  }
> >  
> >  /*
> > - * ext4_punch_hole: punches a hole in a file by releaseing the blocks
> > + * ext4_punch_hole: punches a hole in a file by releasing the blocks
> >   * associated with the given offset and length
> >   *
> >   * @inode:  File inode
> > @@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
> >  	 * Write out all dirty pages to avoid race conditions
> >  	 * Then release them.
> >  	 */
> > -	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> > +	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> >  		ret = filemap_write_and_wait_range(mapping, offset,
> >  						   offset + length - 1);
> >  		if (ret)
> > -- 
> > 2.9.0
> > 
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

Re: [PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Jan Kara]

On Wed 21-09-16 09:22:44, Ross Zwisler wrote:
> On Tue, Aug 23, 2016 at 04:04:11PM -0600, Ross Zwisler wrote:
> > Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
> > This is because the logic around filemap_write_and_wait_range() in
> > ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
> > not for dirty DAX exceptional entries.
> > 
> > Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> > Reviewed-by: Jan Kara <jack@suse.cz>
> > Cc: <stable@vger.kernel.org>
> 
> Ted & Jan,
> 
> I'm still working on the latest version of the PMD work which integrates with
> the new struct iomap faults.  At this point it doesn't look like I'm going to
> make v4.9, but I think that this bug fix at least should probably go in alone?

Yeah. Ted, feel free to add:

Reviewed-by: Jan Kara <jack@suse.cz>

and merge this change. Thanks!

								Honza
> >  fs/ext4/inode.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> > index 3131747..0900cb4 100644
> > --- a/fs/ext4/inode.c
> > +++ b/fs/ext4/inode.c
> > @@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
> >  }
> >  
> >  /*
> > - * ext4_punch_hole: punches a hole in a file by releaseing the blocks
> > + * ext4_punch_hole: punches a hole in a file by releasing the blocks
> >   * associated with the given offset and length
> >   *
> >   * @inode:  File inode
> > @@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
> >  	 * Write out all dirty pages to avoid race conditions
> >  	 * Then release them.
> >  	 */
> > -	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> > +	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> >  		ret = filemap_write_and_wait_range(mapping, offset,
> >  						   offset + length - 1);
> >  		if (ret)
> > -- 
> > 2.9.0
> > 
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Jan Kara]

On Wed 21-09-16 09:22:44, Ross Zwisler wrote:
> On Tue, Aug 23, 2016 at 04:04:11PM -0600, Ross Zwisler wrote:
> > Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
> > This is because the logic around filemap_write_and_wait_range() in
> > ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
> > not for dirty DAX exceptional entries.
> > 
> > Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> > Reviewed-by: Jan Kara <jack@suse.cz>
> > Cc: <stable@vger.kernel.org>
> 
> Ted & Jan,
> 
> I'm still working on the latest version of the PMD work which integrates with
> the new struct iomap faults.  At this point it doesn't look like I'm going to
> make v4.9, but I think that this bug fix at least should probably go in alone?

Yeah. Ted, feel free to add:

Reviewed-by: Jan Kara <jack@suse.cz>

and merge this change. Thanks!

								Honza
> >  fs/ext4/inode.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> > index 3131747..0900cb4 100644
> > --- a/fs/ext4/inode.c
> > +++ b/fs/ext4/inode.c
> > @@ -3890,7 +3890,7 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
> >  }
> >  
> >  /*
> > - * ext4_punch_hole: punches a hole in a file by releaseing the blocks
> > + * ext4_punch_hole: punches a hole in a file by releasing the blocks
> >   * associated with the given offset and length
> >   *
> >   * @inode:  File inode
> > @@ -3919,7 +3919,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
> >  	 * Write out all dirty pages to avoid race conditions
> >  	 * Then release them.
> >  	 */
> > -	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> > +	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> >  		ret = filemap_write_and_wait_range(mapping, offset,
> >  						   offset + length - 1);
> >  		if (ret)
> > -- 
> > 2.9.0
> > 
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

Re: [PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Theodore Ts'o]

On Wed, Sep 21, 2016 at 09:22:44AM -0600, Ross Zwisler wrote:
> 
> Ted & Jan,
> 
> I'm still working on the latest version of the PMD work which integrates with
> the new struct iomap faults.  At this point it doesn't look like I'm going to
> make v4.9, but I think that this bug fix at least should probably go in alone?

Thanks, applied.

						- Ted

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 1/9] ext4: allow DAX writeback for hole punch

[Theodore Ts'o]

On Wed, Sep 21, 2016 at 09:22:44AM -0600, Ross Zwisler wrote:
> 
> Ted & Jan,
> 
> I'm still working on the latest version of the PMD work which integrates with
> the new struct iomap faults.  At this point it doesn't look like I'm going to
> make v4.9, but I think that this bug fix at least should probably go in alone?

Thanks, applied.

						- Ted

[PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

When DAX calls ext2_get_block() and the file offset points to a hole we
currently don't set bh_result->b_size.  When we re-enable PMD faults DAX
will need bh_result->b_size to tell it the size of the hole so it can
decide whether to fault in a 4 KiB zero page or a 2 MiB zero page.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/ext2/inode.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index d5c7d09..dd55d74 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -773,6 +773,9 @@ int ext2_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_
 	if (ret > 0) {
 		bh_result->b_size = (ret << inode->i_blkbits);
 		ret = 0;
+	} else if (ret == 0) {
+		/* hole case, need to fill in bh_result->b_size */
+		bh_result->b_size = 1 << inode->i_blkbits;
 	}
 	return ret;
 
-- 
2.9.0

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

[PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

When DAX calls ext2_get_block() and the file offset points to a hole we
currently don't set bh_result->b_size.  When we re-enable PMD faults DAX
will need bh_result->b_size to tell it the size of the hole so it can
decide whether to fault in a 4 KiB zero page or a 2 MiB zero page.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/ext2/inode.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index d5c7d09..dd55d74 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -773,6 +773,9 @@ int ext2_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_
 	if (ret > 0) {
 		bh_result->b_size = (ret << inode->i_blkbits);
 		ret = 0;
+	} else if (ret == 0) {
+		/* hole case, need to fill in bh_result->b_size */
+		bh_result->b_size = 1 << inode->i_blkbits;
 	}
 	return ret;
 
-- 
2.9.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

When DAX calls ext2_get_block() and the file offset points to a hole we
currently don't set bh_result->b_size.  When we re-enable PMD faults DAX
will need bh_result->b_size to tell it the size of the hole so it can
decide whether to fault in a 4 KiB zero page or a 2 MiB zero page.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/ext2/inode.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index d5c7d09..dd55d74 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -773,6 +773,9 @@ int ext2_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_
 	if (ret > 0) {
 		bh_result->b_size = (ret << inode->i_blkbits);
 		ret = 0;
+	} else if (ret == 0) {
+		/* hole case, need to fill in bh_result->b_size */
+		bh_result->b_size = 1 << inode->i_blkbits;
 	}
 	return ret;
 
-- 
2.9.0

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

Hi Ross,

can you take at my (fully working, but not fully cleaned up) version
of the iomap based DAX code here:

http://git.infradead.org/users/hch/vfs.git/shortlog/refs/heads/iomap-dax

By using iomap we don't even have the size hole problem and totally
get out of the reverse-engineer what buffer_heads are trying to tell
us business.  It also gets rid of the other warts of the DAX path
due to pretending to be like direct I/O, so this might be a better
way forward also for ext2/4.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

Hi Ross,

can you take at my (fully working, but not fully cleaned up) version
of the iomap based DAX code here:

http://git.infradead.org/users/hch/vfs.git/shortlog/refs/heads/iomap-dax

By using iomap we don't even have the size hole problem and totally
get out of the reverse-engineer what buffer_heads are trying to tell
us business.  It also gets rid of the other warts of the DAX path
due to pretending to be like direct I/O, so this might be a better
way forward also for ext2/4.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

Hi Ross,

can you take at my (fully working, but not fully cleaned up) version
of the iomap based DAX code here:

http://git.infradead.org/users/hch/vfs.git/shortlog/refs/heads/iomap-dax

By using iomap we don't even have the size hole problem and totally
get out of the reverse-engineer what buffer_heads are trying to tell
us business.  It also gets rid of the other warts of the DAX path
due to pretending to be like direct I/O, so this might be a better
way forward also for ext2/4.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Thu, Aug 25, 2016 at 12:57:28AM -0700, Christoph Hellwig wrote:
> Hi Ross,
> 
> can you take at my (fully working, but not fully cleaned up) version
> of the iomap based DAX code here:
> 
> http://git.infradead.org/users/hch/vfs.git/shortlog/refs/heads/iomap-dax
> 
> By using iomap we don't even have the size hole problem and totally
> get out of the reverse-engineer what buffer_heads are trying to tell
> us business.  It also gets rid of the other warts of the DAX path
> due to pretending to be like direct I/O, so this might be a better
> way forward also for ext2/4.

Sure, I'll take a look.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Thu, Aug 25, 2016 at 12:57:28AM -0700, Christoph Hellwig wrote:
> Hi Ross,
> 
> can you take at my (fully working, but not fully cleaned up) version
> of the iomap based DAX code here:
> 
> http://git.infradead.org/users/hch/vfs.git/shortlog/refs/heads/iomap-dax
> 
> By using iomap we don't even have the size hole problem and totally
> get out of the reverse-engineer what buffer_heads are trying to tell
> us business.  It also gets rid of the other warts of the DAX path
> due to pretending to be like direct I/O, so this might be a better
> way forward also for ext2/4.

Sure, I'll take a look.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Thu, Aug 25, 2016 at 12:57:28AM -0700, Christoph Hellwig wrote:
> Hi Ross,
> 
> can you take at my (fully working, but not fully cleaned up) version
> of the iomap based DAX code here:
> 
> http://git.infradead.org/users/hch/vfs.git/shortlog/refs/heads/iomap-dax
> 
> By using iomap we don't even have the size hole problem and totally
> get out of the reverse-engineer what buffer_heads are trying to tell
> us business.  It also gets rid of the other warts of the DAX path
> due to pretending to be like direct I/O, so this might be a better
> way forward also for ext2/4.

Sure, I'll take a look.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Thu, Aug 25, 2016 at 12:57:28AM -0700, Christoph Hellwig wrote:
> Hi Ross,
> 
> can you take at my (fully working, but not fully cleaned up) version
> of the iomap based DAX code here:
> 
> http://git.infradead.org/users/hch/vfs.git/shortlog/refs/heads/iomap-dax
> 
> By using iomap we don't even have the size hole problem and totally
> get out of the reverse-engineer what buffer_heads are trying to tell
> us business.  It also gets rid of the other warts of the DAX path
> due to pretending to be like direct I/O, so this might be a better
> way forward also for ext2/4.

In general I agree that the usage of struct iomap seems more straightforward
than the old way of using struct buffer_head + get_block_t.  I really don't
think we want to have two competing DAX I/O and fault paths, though, which I
assume everyone else agrees with as well.

These changes don't remove the things in XFS needed by the old I/O and fault
paths (e.g.  xfs_get_blocks_direct() is still there an unchanged).  Is the
correct way forward to get buy-in from ext2/ext4 so that they also move to
supporting an iomap based I/O path (xfs_file_iomap_begin(),
xfs_iomap_write_direct(), etc?).  That would allow us to have parallel I/O and
fault paths for a while, then remove the old buffer_head based versions when
the three supported filesystems have moved to iomap.

If ext2 and ext4 don't choose to move to iomap, though, I don't think we want
to have a separate I/O & fault path for iomap/XFS.  That seems too painful,
and the old buffer_head version should continue to work, ugly as it may be.

Assuming we can get buy-in from ext4/ext2, I can work on a PMD version of the
iomap based fault path that is equivalent to the buffer_head based one I sent
out in my series, and we can all eventually move to that.

A few comments/questions on the implementation:

1) In your mail above you say "It also gets rid of the other warts of the DAX
   path due to pretending to be like direct I/O".  I assume by this you mean
   the code in dax_do_io() around DIO_LOCKING, inode_dio_begin(), etc?
   Perhaps there are other things as well in XFS, but this is what I see in
   the DAX code.  If so, yep, this seems like a win.  I don't understand how
   DIO_LOCKING is relevant to the DAX I/O path, as we never mix buffered and
   direct access.

   The comment in dax_do_io() for the inode_dio_begin() call says that it
   prevents the I/O from races with truncate.  Am I correct that we now get
   this protection via the xfs_rw_ilock()/xfs_rw_iunlock() calls in
   xfs_file_dax_write()?

2) Just a nit, I noticed that you used "~(PAGE_SIZE - 1)" in several places in
   iomap_dax_actor() and iomap_dax_fault() instead of PAGE_MASK.  Was this
   intentional?

3) It's kind of weird having iomap_dax_fault() in fs/dax.c but having
   iomap_dax_actor() and iomap_dax_rw() in fs/iomap.c?  I'm guessing the
   latter is placed where it is because it uses iomap_apply(), which is local
   to fs/iomap.c?  Anyway, it would be nice if we could keep them together, if
   possible.

4) In iomap_dax_actor() you do this check:

	WARN_ON_ONCE(iomap->type != IOMAP_MAPPED);

   If we hit this we should bail with -EIO, yea?  Otherwise we could write to
   unmapped space or something horrible.

5) In iomap_dax_fault, I think the "I/O beyond the end of the file" check
   might have been broken.  Take for example an I/O to the second page of a
   file, where the file has size one page.  So:
   
   vmf->pgoff = 1
   i_size_read(inode) = 4096 
   
   Here's the old code in dax_fault():

	size = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT;
	if (vmf->pgoff >= size)
		return VM_FAULT_SIGBUS;

   size = (4096 + 4096 - 1) >> PAGE_SHIFT = 1
   vmf->pgoff is 1 and size is 1, so we return SIGBUS

   Here's the new code:

	   if (pos >= i_size_read(inode) + PAGE_SIZE - 1)
		return VM_FAULT_SIGBUS;

   pos = vmf->pgoff << PAGE_SHIFT = 4096
   i_size_read(inode) + PAGE_SIZE  - 1 = 8193
   so, 'pos' isn't >= where we calculate the end of the file to be, so we do I/O

   Basically the old check did the "+ PAGE_SIZE - 1" so that the >> PAGE_SHIFT
   was sure to round up to the next full page.  You don't need this with your
   current logic, so I think the test should just be:

	   if (pos >= i_size_read(inode))
		return VM_FAULT_SIGBUS;

   Right?

6) Regarding the "we don't even have the size hole problem" comment in your
   mail, the current PMD logic requires us to know the size of the hole.  This
   is important so that we can fault in a huge zero page if we have a 2 MiB
   hole.  It's fine if that 2 MiB page then gets fragmented into 4k DAX
   allocations when we start to do writes, but the path the other way doesn't
   work.  If we don't know the size of holes then we can't fault in a 2 MiB
   zero page, so we'll use 4k zero pages to satisfy reads.  This means that if
   later we want to fault in a 2MiB DAX allocation, we don't have a single
   entry that we can use to lock the entire 2MiB range while we clean the
   radix tree an unmap the range from all the user processes.  With the
   current PMD logic this will mean that if someone does a 4k read that faults
   in a 4k zero page, we will only use 4k faults for that range and won't use
   PMDs.

   The current XFS code in the v4.8 tree tells me the size of the hole, and I
   think we need to keep this functionality.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Thu, Aug 25, 2016 at 12:57:28AM -0700, Christoph Hellwig wrote:
> Hi Ross,
> 
> can you take at my (fully working, but not fully cleaned up) version
> of the iomap based DAX code here:
> 
> http://git.infradead.org/users/hch/vfs.git/shortlog/refs/heads/iomap-dax
> 
> By using iomap we don't even have the size hole problem and totally
> get out of the reverse-engineer what buffer_heads are trying to tell
> us business.  It also gets rid of the other warts of the DAX path
> due to pretending to be like direct I/O, so this might be a better
> way forward also for ext2/4.

In general I agree that the usage of struct iomap seems more straightforward
than the old way of using struct buffer_head + get_block_t.  I really don't
think we want to have two competing DAX I/O and fault paths, though, which I
assume everyone else agrees with as well.

These changes don't remove the things in XFS needed by the old I/O and fault
paths (e.g.  xfs_get_blocks_direct() is still there an unchanged).  Is the
correct way forward to get buy-in from ext2/ext4 so that they also move to
supporting an iomap based I/O path (xfs_file_iomap_begin(),
xfs_iomap_write_direct(), etc?).  That would allow us to have parallel I/O and
fault paths for a while, then remove the old buffer_head based versions when
the three supported filesystems have moved to iomap.

If ext2 and ext4 don't choose to move to iomap, though, I don't think we want
to have a separate I/O & fault path for iomap/XFS.  That seems too painful,
and the old buffer_head version should continue to work, ugly as it may be.

Assuming we can get buy-in from ext4/ext2, I can work on a PMD version of the
iomap based fault path that is equivalent to the buffer_head based one I sent
out in my series, and we can all eventually move to that.

A few comments/questions on the implementation:

1) In your mail above you say "It also gets rid of the other warts of the DAX
   path due to pretending to be like direct I/O".  I assume by this you mean
   the code in dax_do_io() around DIO_LOCKING, inode_dio_begin(), etc?
   Perhaps there are other things as well in XFS, but this is what I see in
   the DAX code.  If so, yep, this seems like a win.  I don't understand how
   DIO_LOCKING is relevant to the DAX I/O path, as we never mix buffered and
   direct access.

   The comment in dax_do_io() for the inode_dio_begin() call says that it
   prevents the I/O from races with truncate.  Am I correct that we now get
   this protection via the xfs_rw_ilock()/xfs_rw_iunlock() calls in
   xfs_file_dax_write()?

2) Just a nit, I noticed that you used "~(PAGE_SIZE - 1)" in several places in
   iomap_dax_actor() and iomap_dax_fault() instead of PAGE_MASK.  Was this
   intentional?

3) It's kind of weird having iomap_dax_fault() in fs/dax.c but having
   iomap_dax_actor() and iomap_dax_rw() in fs/iomap.c?  I'm guessing the
   latter is placed where it is because it uses iomap_apply(), which is local
   to fs/iomap.c?  Anyway, it would be nice if we could keep them together, if
   possible.

4) In iomap_dax_actor() you do this check:

	WARN_ON_ONCE(iomap->type != IOMAP_MAPPED);

   If we hit this we should bail with -EIO, yea?  Otherwise we could write to
   unmapped space or something horrible.

5) In iomap_dax_fault, I think the "I/O beyond the end of the file" check
   might have been broken.  Take for example an I/O to the second page of a
   file, where the file has size one page.  So:
   
   vmf->pgoff = 1
   i_size_read(inode) = 4096 
   
   Here's the old code in dax_fault():

	size = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT;
	if (vmf->pgoff >= size)
		return VM_FAULT_SIGBUS;

   size = (4096 + 4096 - 1) >> PAGE_SHIFT = 1
   vmf->pgoff is 1 and size is 1, so we return SIGBUS

   Here's the new code:

	   if (pos >= i_size_read(inode) + PAGE_SIZE - 1)
		return VM_FAULT_SIGBUS;

   pos = vmf->pgoff << PAGE_SHIFT = 4096
   i_size_read(inode) + PAGE_SIZE  - 1 = 8193
   so, 'pos' isn't >= where we calculate the end of the file to be, so we do I/O

   Basically the old check did the "+ PAGE_SIZE - 1" so that the >> PAGE_SHIFT
   was sure to round up to the next full page.  You don't need this with your
   current logic, so I think the test should just be:

	   if (pos >= i_size_read(inode))
		return VM_FAULT_SIGBUS;

   Right?

6) Regarding the "we don't even have the size hole problem" comment in your
   mail, the current PMD logic requires us to know the size of the hole.  This
   is important so that we can fault in a huge zero page if we have a 2 MiB
   hole.  It's fine if that 2 MiB page then gets fragmented into 4k DAX
   allocations when we start to do writes, but the path the other way doesn't
   work.  If we don't know the size of holes then we can't fault in a 2 MiB
   zero page, so we'll use 4k zero pages to satisfy reads.  This means that if
   later we want to fault in a 2MiB DAX allocation, we don't have a single
   entry that we can use to lock the entire 2MiB range while we clean the
   radix tree an unmap the range from all the user processes.  With the
   current PMD logic this will mean that if someone does a 4k read that faults
   in a 4k zero page, we will only use 4k faults for that range and won't use
   PMDs.

   The current XFS code in the v4.8 tree tells me the size of the hole, and I
   think we need to keep this functionality.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Thu, Aug 25, 2016 at 12:57:28AM -0700, Christoph Hellwig wrote:
> Hi Ross,
> 
> can you take at my (fully working, but not fully cleaned up) version
> of the iomap based DAX code here:
> 
> http://git.infradead.org/users/hch/vfs.git/shortlog/refs/heads/iomap-dax
> 
> By using iomap we don't even have the size hole problem and totally
> get out of the reverse-engineer what buffer_heads are trying to tell
> us business.  It also gets rid of the other warts of the DAX path
> due to pretending to be like direct I/O, so this might be a better
> way forward also for ext2/4.

In general I agree that the usage of struct iomap seems more straightforward
than the old way of using struct buffer_head + get_block_t.  I really don't
think we want to have two competing DAX I/O and fault paths, though, which I
assume everyone else agrees with as well.

These changes don't remove the things in XFS needed by the old I/O and fault
paths (e.g.  xfs_get_blocks_direct() is still there an unchanged).  Is the
correct way forward to get buy-in from ext2/ext4 so that they also move to
supporting an iomap based I/O path (xfs_file_iomap_begin(),
xfs_iomap_write_direct(), etc?).  That would allow us to have parallel I/O and
fault paths for a while, then remove the old buffer_head based versions when
the three supported filesystems have moved to iomap.

If ext2 and ext4 don't choose to move to iomap, though, I don't think we want
to have a separate I/O & fault path for iomap/XFS.  That seems too painful,
and the old buffer_head version should continue to work, ugly as it may be.

Assuming we can get buy-in from ext4/ext2, I can work on a PMD version of the
iomap based fault path that is equivalent to the buffer_head based one I sent
out in my series, and we can all eventually move to that.

A few comments/questions on the implementation:

1) In your mail above you say "It also gets rid of the other warts of the DAX
   path due to pretending to be like direct I/O".  I assume by this you mean
   the code in dax_do_io() around DIO_LOCKING, inode_dio_begin(), etc?
   Perhaps there are other things as well in XFS, but this is what I see in
   the DAX code.  If so, yep, this seems like a win.  I don't understand how
   DIO_LOCKING is relevant to the DAX I/O path, as we never mix buffered and
   direct access.

   The comment in dax_do_io() for the inode_dio_begin() call says that it
   prevents the I/O from races with truncate.  Am I correct that we now get
   this protection via the xfs_rw_ilock()/xfs_rw_iunlock() calls in
   xfs_file_dax_write()?

2) Just a nit, I noticed that you used "~(PAGE_SIZE - 1)" in several places in
   iomap_dax_actor() and iomap_dax_fault() instead of PAGE_MASK.  Was this
   intentional?

3) It's kind of weird having iomap_dax_fault() in fs/dax.c but having
   iomap_dax_actor() and iomap_dax_rw() in fs/iomap.c?  I'm guessing the
   latter is placed where it is because it uses iomap_apply(), which is local
   to fs/iomap.c?  Anyway, it would be nice if we could keep them together, if
   possible.

4) In iomap_dax_actor() you do this check:

	WARN_ON_ONCE(iomap->type != IOMAP_MAPPED);

   If we hit this we should bail with -EIO, yea?  Otherwise we could write to
   unmapped space or something horrible.

5) In iomap_dax_fault, I think the "I/O beyond the end of the file" check
   might have been broken.  Take for example an I/O to the second page of a
   file, where the file has size one page.  So:
   
   vmf->pgoff = 1
   i_size_read(inode) = 4096 
   
   Here's the old code in dax_fault():

	size = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT;
	if (vmf->pgoff >= size)
		return VM_FAULT_SIGBUS;

   size = (4096 + 4096 - 1) >> PAGE_SHIFT = 1
   vmf->pgoff is 1 and size is 1, so we return SIGBUS

   Here's the new code:

	   if (pos >= i_size_read(inode) + PAGE_SIZE - 1)
		return VM_FAULT_SIGBUS;

   pos = vmf->pgoff << PAGE_SHIFT = 4096
   i_size_read(inode) + PAGE_SIZE  - 1 = 8193
   so, 'pos' isn't >= where we calculate the end of the file to be, so we do I/O

   Basically the old check did the "+ PAGE_SIZE - 1" so that the >> PAGE_SHIFT
   was sure to round up to the next full page.  You don't need this with your
   current logic, so I think the test should just be:

	   if (pos >= i_size_read(inode))
		return VM_FAULT_SIGBUS;

   Right?

6) Regarding the "we don't even have the size hole problem" comment in your
   mail, the current PMD logic requires us to know the size of the hole.  This
   is important so that we can fault in a huge zero page if we have a 2 MiB
   hole.  It's fine if that 2 MiB page then gets fragmented into 4k DAX
   allocations when we start to do writes, but the path the other way doesn't
   work.  If we don't know the size of holes then we can't fault in a 2 MiB
   zero page, so we'll use 4k zero pages to satisfy reads.  This means that if
   later we want to fault in a 2MiB DAX allocation, we don't have a single
   entry that we can use to lock the entire 2MiB range while we clean the
   radix tree an unmap the range from all the user processes.  With the
   current PMD logic this will mean that if someone does a 4k read that faults
   in a 4k zero page, we will only use 4k faults for that range and won't use
   PMDs.

   The current XFS code in the v4.8 tree tells me the size of the hole, and I
   think we need to keep this functionality.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Dave Chinner]

On Fri, Aug 26, 2016 at 03:29:34PM -0600, Ross Zwisler wrote:
> On Thu, Aug 25, 2016 at 12:57:28AM -0700, Christoph Hellwig wrote:
> > Hi Ross,
> > 
> > can you take at my (fully working, but not fully cleaned up) version
> > of the iomap based DAX code here:
> > 
> > http://git.infradead.org/users/hch/vfs.git/shortlog/refs/heads/iomap-dax
> > 
> > By using iomap we don't even have the size hole problem and totally
> > get out of the reverse-engineer what buffer_heads are trying to tell
> > us business.  It also gets rid of the other warts of the DAX path
> > due to pretending to be like direct I/O, so this might be a better
> > way forward also for ext2/4.
> 
> In general I agree that the usage of struct iomap seems more straightforward
> than the old way of using struct buffer_head + get_block_t.  I really don't
> think we want to have two competing DAX I/O and fault paths, though, which I
> assume everyone else agrees with as well.

We'll be moving XFS this way, regardless of whether the generic DAX
code goes that way or not. iomap is a much cleaner, more efficient
interface than get_blocks via bufferheads. We are slowly removing
bufferheads from XFS so anything that uses them or depends on them
that Xfs requires is going to have an iomap-based variant written
for it.

Christoph is doing the hard yards to make iomap a VFS level
interface because that's a) the most efficient way to implement it,
and b) it's the right place for IO path extent mapping abstractions.
So there will be a iomap path for DAX, just like there will be a
iomap path for direct IO, regardless of what other filesystems
implement. i.e. other filesystems can move to the more efficient
iomap infrastructure if they want, but we can't force them to do so.

As such, the generic DAX path can either remain as it is, or we can
move to iomap and use wrappers for converting get_block() +
bufferehead to iomaps on non-iomap filesystems.  (i.e. similar to
the existing iomap_to_bh() for allowing iomap lookups to be used to
replace bufferheads returned by get_block().)

I'd much prefer we move DAX to iomaps before there is wider uptake
of it in other filesystems - I've been saying we should use iomaps
for DAX right from the start. Now we have the iomap infrastructure
in place we should jump straight to it. If we have to drag ext4
kicking and screaming into the 1990s to get there then so be it - it
won't be the first time...

> These changes don't remove the things in XFS needed by the old I/O and fault
> paths (e.g.  xfs_get_blocks_direct() is still there an unchanged).  Is the

Yes, they'll remain until their functionality has been replaced by
iomap functions. e.g. xfs_get_blocks_direct() can't be removed
until the direct IO path has an iomap interface.

....

> 6) Regarding the "we don't even have the size hole problem" comment in your
>    mail, the current PMD logic requires us to know the size of the hole.  This
....
>    The current XFS code in the v4.8 tree tells me the size of the hole, and I
>    think we need to keep this functionality.

IOMAP_HOLE extents. It's a requirement of the iomap infrastructure
that the filesystem reports hole extents in full for the range being
mapped.

Cheers,

Dave.

-- 
Dave Chinner
david@fromorbit.com

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Dave Chinner]

On Fri, Aug 26, 2016 at 03:29:34PM -0600, Ross Zwisler wrote:
> On Thu, Aug 25, 2016 at 12:57:28AM -0700, Christoph Hellwig wrote:
> > Hi Ross,
> > 
> > can you take at my (fully working, but not fully cleaned up) version
> > of the iomap based DAX code here:
> > 
> > http://git.infradead.org/users/hch/vfs.git/shortlog/refs/heads/iomap-dax
> > 
> > By using iomap we don't even have the size hole problem and totally
> > get out of the reverse-engineer what buffer_heads are trying to tell
> > us business.  It also gets rid of the other warts of the DAX path
> > due to pretending to be like direct I/O, so this might be a better
> > way forward also for ext2/4.
> 
> In general I agree that the usage of struct iomap seems more straightforward
> than the old way of using struct buffer_head + get_block_t.  I really don't
> think we want to have two competing DAX I/O and fault paths, though, which I
> assume everyone else agrees with as well.

We'll be moving XFS this way, regardless of whether the generic DAX
code goes that way or not. iomap is a much cleaner, more efficient
interface than get_blocks via bufferheads. We are slowly removing
bufferheads from XFS so anything that uses them or depends on them
that Xfs requires is going to have an iomap-based variant written
for it.

Christoph is doing the hard yards to make iomap a VFS level
interface because that's a) the most efficient way to implement it,
and b) it's the right place for IO path extent mapping abstractions.
So there will be a iomap path for DAX, just like there will be a
iomap path for direct IO, regardless of what other filesystems
implement. i.e. other filesystems can move to the more efficient
iomap infrastructure if they want, but we can't force them to do so.

As such, the generic DAX path can either remain as it is, or we can
move to iomap and use wrappers for converting get_block() +
bufferehead to iomaps on non-iomap filesystems.  (i.e. similar to
the existing iomap_to_bh() for allowing iomap lookups to be used to
replace bufferheads returned by get_block().)

I'd much prefer we move DAX to iomaps before there is wider uptake
of it in other filesystems - I've been saying we should use iomaps
for DAX right from the start. Now we have the iomap infrastructure
in place we should jump straight to it. If we have to drag ext4
kicking and screaming into the 1990s to get there then so be it - it
won't be the first time...

> These changes don't remove the things in XFS needed by the old I/O and fault
> paths (e.g.  xfs_get_blocks_direct() is still there an unchanged).  Is the

Yes, they'll remain until their functionality has been replaced by
iomap functions. e.g. xfs_get_blocks_direct() can't be removed
until the direct IO path has an iomap interface.

....

> 6) Regarding the "we don't even have the size hole problem" comment in your
>    mail, the current PMD logic requires us to know the size of the hole.  This
....
>    The current XFS code in the v4.8 tree tells me the size of the hole, and I
>    think we need to keep this functionality.

IOMAP_HOLE extents. It's a requirement of the iomap infrastructure
that the filesystem reports hole extents in full for the range being
mapped.

Cheers,

Dave.

-- 
Dave Chinner
david@fromorbit.com

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Fri, Aug 26, 2016 at 03:29:34PM -0600, Ross Zwisler wrote:
> These changes don't remove the things in XFS needed by the old I/O and fault
> paths (e.g.  xfs_get_blocks_direct() is still there an unchanged).  Is the
> correct way forward to get buy-in from ext2/ext4 so that they also move to
> supporting an iomap based I/O path (xfs_file_iomap_begin(),
> xfs_iomap_write_direct(), etc?).  That would allow us to have parallel I/O and
> fault paths for a while, then remove the old buffer_head based versions when
> the three supported filesystems have moved to iomap.
> 
> If ext2 and ext4 don't choose to move to iomap, though, I don't think we want
> to have a separate I/O & fault path for iomap/XFS.  That seems too painful,
> and the old buffer_head version should continue to work, ugly as it may be.

We're going to move forward killing buffer_heads in XFS.  I think ext4
would dramatically benefit from this a well, as would ext2 (although I
think all that DAX work in ext2 is a horrible idea to start with).

If I don't get buy-in for the iomap DAX work in the dax code we'll just
have to keep it separate.  That buffer_head mess just isn't maintainable
the long run.

> 1) In your mail above you say "It also gets rid of the other warts of the DAX
>    path due to pretending to be like direct I/O".  I assume by this you mean
>    the code in dax_do_io() around DIO_LOCKING, inode_dio_begin(), etc?

Yes.

>    Perhaps there are other things as well in XFS, but this is what I see in
>    the DAX code.  If so, yep, this seems like a win.  I don't understand how
>    DIO_LOCKING is relevant to the DAX I/O path, as we never mix buffered and
>    direct access.

It's related to doing stupid copy and paste from direct I/O in the DAX
code.

>    The comment in dax_do_io() for the inode_dio_begin() call says that it
>    prevents the I/O from races with truncate.  Am I correct that we now get
>    this protection via the xfs_rw_ilock()/xfs_rw_iunlock() calls in
>    xfs_file_dax_write()?

Yes, XFS always has a lock over reads that serializes with truncate.
Currenrly it's the XFS i_iolock, but I'll remove that soon and use the
VFS i_rwsem instead.  For ext2/4 we could go straight to i_rwsem in
shared mode.

> 2) Just a nit, I noticed that you used "~(PAGE_SIZE - 1)" in several places in
>    iomap_dax_actor() and iomap_dax_fault() instead of PAGE_MASK.  Was this
>    intentional?

Mostly because that's how I think.  I'm fine using PAGE_MASK, though.

> 3) It's kind of weird having iomap_dax_fault() in fs/dax.c but having
>    iomap_dax_actor() and iomap_dax_rw() in fs/iomap.c?  I'm guessing the
>    latter is placed where it is because it uses iomap_apply(), which is local
>    to fs/iomap.c?  Anyway, it would be nice if we could keep them together, if
>    possible.

It's still work in progress and could use a few cleanups.

> 
> 4) In iomap_dax_actor() you do this check:
> 
> 	WARN_ON_ONCE(iomap->type != IOMAP_MAPPED);
> 
>    If we hit this we should bail with -EIO, yea?  Otherwise we could write to
>    unmapped space or something horrible.

Fine with me.

> 5) In iomap_dax_fault, I think the "I/O beyond the end of the file" check
>    might have been broken.  Take for example an I/O to the second page of a
>    file, where the file has size one page.  So:

sure, I can fix this up.

> 6) Regarding the "we don't even have the size hole problem" comment in your
>    mail, the current PMD logic requires us to know the size of the hole.

And a big part of the iomap interface is proper reporting of holes.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Fri, Aug 26, 2016 at 03:29:34PM -0600, Ross Zwisler wrote:
> These changes don't remove the things in XFS needed by the old I/O and fault
> paths (e.g.  xfs_get_blocks_direct() is still there an unchanged).  Is the
> correct way forward to get buy-in from ext2/ext4 so that they also move to
> supporting an iomap based I/O path (xfs_file_iomap_begin(),
> xfs_iomap_write_direct(), etc?).  That would allow us to have parallel I/O and
> fault paths for a while, then remove the old buffer_head based versions when
> the three supported filesystems have moved to iomap.
> 
> If ext2 and ext4 don't choose to move to iomap, though, I don't think we want
> to have a separate I/O & fault path for iomap/XFS.  That seems too painful,
> and the old buffer_head version should continue to work, ugly as it may be.

We're going to move forward killing buffer_heads in XFS.  I think ext4
would dramatically benefit from this a well, as would ext2 (although I
think all that DAX work in ext2 is a horrible idea to start with).

If I don't get buy-in for the iomap DAX work in the dax code we'll just
have to keep it separate.  That buffer_head mess just isn't maintainable
the long run.

> 1) In your mail above you say "It also gets rid of the other warts of the DAX
>    path due to pretending to be like direct I/O".  I assume by this you mean
>    the code in dax_do_io() around DIO_LOCKING, inode_dio_begin(), etc?

Yes.

>    Perhaps there are other things as well in XFS, but this is what I see in
>    the DAX code.  If so, yep, this seems like a win.  I don't understand how
>    DIO_LOCKING is relevant to the DAX I/O path, as we never mix buffered and
>    direct access.

It's related to doing stupid copy and paste from direct I/O in the DAX
code.

>    The comment in dax_do_io() for the inode_dio_begin() call says that it
>    prevents the I/O from races with truncate.  Am I correct that we now get
>    this protection via the xfs_rw_ilock()/xfs_rw_iunlock() calls in
>    xfs_file_dax_write()?

Yes, XFS always has a lock over reads that serializes with truncate.
Currenrly it's the XFS i_iolock, but I'll remove that soon and use the
VFS i_rwsem instead.  For ext2/4 we could go straight to i_rwsem in
shared mode.

> 2) Just a nit, I noticed that you used "~(PAGE_SIZE - 1)" in several places in
>    iomap_dax_actor() and iomap_dax_fault() instead of PAGE_MASK.  Was this
>    intentional?

Mostly because that's how I think.  I'm fine using PAGE_MASK, though.

> 3) It's kind of weird having iomap_dax_fault() in fs/dax.c but having
>    iomap_dax_actor() and iomap_dax_rw() in fs/iomap.c?  I'm guessing the
>    latter is placed where it is because it uses iomap_apply(), which is local
>    to fs/iomap.c?  Anyway, it would be nice if we could keep them together, if
>    possible.

It's still work in progress and could use a few cleanups.

> 
> 4) In iomap_dax_actor() you do this check:
> 
> 	WARN_ON_ONCE(iomap->type != IOMAP_MAPPED);
> 
>    If we hit this we should bail with -EIO, yea?  Otherwise we could write to
>    unmapped space or something horrible.

Fine with me.

> 5) In iomap_dax_fault, I think the "I/O beyond the end of the file" check
>    might have been broken.  Take for example an I/O to the second page of a
>    file, where the file has size one page.  So:

sure, I can fix this up.

> 6) Regarding the "we don't even have the size hole problem" comment in your
>    mail, the current PMD logic requires us to know the size of the hole.

And a big part of the iomap interface is proper reporting of holes.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Fri, Aug 26, 2016 at 03:29:34PM -0600, Ross Zwisler wrote:
> These changes don't remove the things in XFS needed by the old I/O and fault
> paths (e.g.  xfs_get_blocks_direct() is still there an unchanged).  Is the
> correct way forward to get buy-in from ext2/ext4 so that they also move to
> supporting an iomap based I/O path (xfs_file_iomap_begin(),
> xfs_iomap_write_direct(), etc?).  That would allow us to have parallel I/O and
> fault paths for a while, then remove the old buffer_head based versions when
> the three supported filesystems have moved to iomap.
> 
> If ext2 and ext4 don't choose to move to iomap, though, I don't think we want
> to have a separate I/O & fault path for iomap/XFS.  That seems too painful,
> and the old buffer_head version should continue to work, ugly as it may be.

We're going to move forward killing buffer_heads in XFS.  I think ext4
would dramatically benefit from this a well, as would ext2 (although I
think all that DAX work in ext2 is a horrible idea to start with).

If I don't get buy-in for the iomap DAX work in the dax code we'll just
have to keep it separate.  That buffer_head mess just isn't maintainable
the long run.

> 1) In your mail above you say "It also gets rid of the other warts of the DAX
>    path due to pretending to be like direct I/O".  I assume by this you mean
>    the code in dax_do_io() around DIO_LOCKING, inode_dio_begin(), etc?

Yes.

>    Perhaps there are other things as well in XFS, but this is what I see in
>    the DAX code.  If so, yep, this seems like a win.  I don't understand how
>    DIO_LOCKING is relevant to the DAX I/O path, as we never mix buffered and
>    direct access.

It's related to doing stupid copy and paste from direct I/O in the DAX
code.

>    The comment in dax_do_io() for the inode_dio_begin() call says that it
>    prevents the I/O from races with truncate.  Am I correct that we now get
>    this protection via the xfs_rw_ilock()/xfs_rw_iunlock() calls in
>    xfs_file_dax_write()?

Yes, XFS always has a lock over reads that serializes with truncate.
Currenrly it's the XFS i_iolock, but I'll remove that soon and use the
VFS i_rwsem instead.  For ext2/4 we could go straight to i_rwsem in
shared mode.

> 2) Just a nit, I noticed that you used "~(PAGE_SIZE - 1)" in several places in
>    iomap_dax_actor() and iomap_dax_fault() instead of PAGE_MASK.  Was this
>    intentional?

Mostly because that's how I think.  I'm fine using PAGE_MASK, though.

> 3) It's kind of weird having iomap_dax_fault() in fs/dax.c but having
>    iomap_dax_actor() and iomap_dax_rw() in fs/iomap.c?  I'm guessing the
>    latter is placed where it is because it uses iomap_apply(), which is local
>    to fs/iomap.c?  Anyway, it would be nice if we could keep them together, if
>    possible.

It's still work in progress and could use a few cleanups.

> 
> 4) In iomap_dax_actor() you do this check:
> 
> 	WARN_ON_ONCE(iomap->type != IOMAP_MAPPED);
> 
>    If we hit this we should bail with -EIO, yea?  Otherwise we could write to
>    unmapped space or something horrible.

Fine with me.

> 5) In iomap_dax_fault, I think the "I/O beyond the end of the file" check
>    might have been broken.  Take for example an I/O to the second page of a
>    file, where the file has size one page.  So:

sure, I can fix this up.

> 6) Regarding the "we don't even have the size hole problem" comment in your
>    mail, the current PMD logic requires us to know the size of the hole.

And a big part of the iomap interface is proper reporting of holes.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Theodore Ts'o]

On Mon, Aug 29, 2016 at 12:41:16AM -0700, Christoph Hellwig wrote:
> 
> We're going to move forward killing buffer_heads in XFS.  I think ext4
> would dramatically benefit from this a well, as would ext2 (although I
> think all that DAX work in ext2 is a horrible idea to start with).

It's been on my todo list.  The only reason why I haven't done it yet
is because I knew you were working on a solution, and I didn't want to
do things one way for buffered I/O, and a different way for Direct
I/O, and disentangling the DIO code and the different assumptions of
how different file systems interact with the DIO code is a *mess*.

It may have gotten better more recently, but a few years ago I took a
look at it and backed slowly away.....

						- Ted

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Theodore Ts'o]

On Mon, Aug 29, 2016 at 12:41:16AM -0700, Christoph Hellwig wrote:
> 
> We're going to move forward killing buffer_heads in XFS.  I think ext4
> would dramatically benefit from this a well, as would ext2 (although I
> think all that DAX work in ext2 is a horrible idea to start with).

It's been on my todo list.  The only reason why I haven't done it yet
is because I knew you were working on a solution, and I didn't want to
do things one way for buffered I/O, and a different way for Direct
I/O, and disentangling the DIO code and the different assumptions of
how different file systems interact with the DIO code is a *mess*.

It may have gotten better more recently, but a few years ago I took a
look at it and backed slowly away.....

						- Ted

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Theodore Ts'o]

On Mon, Aug 29, 2016 at 12:41:16AM -0700, Christoph Hellwig wrote:
> 
> We're going to move forward killing buffer_heads in XFS.  I think ext4
> would dramatically benefit from this a well, as would ext2 (although I
> think all that DAX work in ext2 is a horrible idea to start with).

It's been on my todo list.  The only reason why I haven't done it yet
is because I knew you were working on a solution, and I didn't want to
do things one way for buffered I/O, and a different way for Direct
I/O, and disentangling the DIO code and the different assumptions of
how different file systems interact with the DIO code is a *mess*.

It may have gotten better more recently, but a few years ago I took a
look at it and backed slowly away.....

						- Ted

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Mon, Aug 29, 2016 at 08:57:41AM -0400, Theodore Ts'o wrote:
> It's been on my todo list.  The only reason why I haven't done it yet
> is because I knew you were working on a solution, and I didn't want to
> do things one way for buffered I/O, and a different way for Direct
> I/O, and disentangling the DIO code and the different assumptions of
> how different file systems interact with the DIO code is a *mess*.

It is.  I have an almost working iomap direct I/O implementation, which
simplifies a lot of this.  Partially because it expects sane locking
(a shared lock should be held over read, fortunately we now have i_rwsem
for that) and allows less opt-in/out behavior, and partially just
because we have so much better infrastructure now (iomap, bio chaining,
iov_iters, ...).

The iomap version is still work in progress, but I'm about to post
a cut down version for block devices which reduces I/O latency by
20%.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Mon, Aug 29, 2016 at 08:57:41AM -0400, Theodore Ts'o wrote:
> It's been on my todo list.  The only reason why I haven't done it yet
> is because I knew you were working on a solution, and I didn't want to
> do things one way for buffered I/O, and a different way for Direct
> I/O, and disentangling the DIO code and the different assumptions of
> how different file systems interact with the DIO code is a *mess*.

It is.  I have an almost working iomap direct I/O implementation, which
simplifies a lot of this.  Partially because it expects sane locking
(a shared lock should be held over read, fortunately we now have i_rwsem
for that) and allows less opt-in/out behavior, and partially just
because we have so much better infrastructure now (iomap, bio chaining,
iov_iters, ...).

The iomap version is still work in progress, but I'm about to post
a cut down version for block devices which reduces I/O latency by
20%.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Mon, Aug 29, 2016 at 08:57:41AM -0400, Theodore Ts'o wrote:
> It's been on my todo list.  The only reason why I haven't done it yet
> is because I knew you were working on a solution, and I didn't want to
> do things one way for buffered I/O, and a different way for Direct
> I/O, and disentangling the DIO code and the different assumptions of
> how different file systems interact with the DIO code is a *mess*.

It is.  I have an almost working iomap direct I/O implementation, which
simplifies a lot of this.  Partially because it expects sane locking
(a shared lock should be held over read, fortunately we now have i_rwsem
for that) and allows less opt-in/out behavior, and partially just
because we have so much better infrastructure now (iomap, bio chaining,
iov_iters, ...).

The iomap version is still work in progress, but I'm about to post
a cut down version for block devices which reduces I/O latency by
20%.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Mon, Aug 29, 2016 at 08:57:41AM -0400, Theodore Ts'o wrote:
> On Mon, Aug 29, 2016 at 12:41:16AM -0700, Christoph Hellwig wrote:
> > 
> > We're going to move forward killing buffer_heads in XFS.  I think ext4
> > would dramatically benefit from this a well, as would ext2 (although I
> > think all that DAX work in ext2 is a horrible idea to start with).
> 
> It's been on my todo list.  The only reason why I haven't done it yet
> is because I knew you were working on a solution, and I didn't want to
> do things one way for buffered I/O, and a different way for Direct
> I/O, and disentangling the DIO code and the different assumptions of
> how different file systems interact with the DIO code is a *mess*.
> 
> It may have gotten better more recently, but a few years ago I took a
> look at it and backed slowly away.....

Ted, what do you think of the idea of moving to struct iomap in ext2?

If ext2 stays with the current struct buffer_head + get_block_t interface,
then it looks like DAX basically has three options:

1) Support two I/O paths and two versions of each of the fault paths (PTE,
PMD, etc).  One of each of these would be based on struct iomap and would be
used by xfs and potentially ext4, and the other would be based on struct
buffer_head + get_block_t and would be used by ext2.

2) Only have a single struct iomap based I/O path and fault path, and add
shim/support code so that ext2 can use it, leaving the rest of ext2 to be
struct buffer_head + get_block_t based.

3) Only have a single struct buffer_head + get_block_t based DAX I/O and fault
path, and have XFS and potentially ext4 do the translation from their native
struct iomap interface.

It seems ideal for ext2 to switch along with everyone else, if getting rid of
struct buffer_head is a global goal.  If not, I guess barring technical issues
#2 above seems cleanest - move DAX to the new structure, and provide backwards
compatibility to ext2.  Thoughts?

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Mon, Aug 29, 2016 at 08:57:41AM -0400, Theodore Ts'o wrote:
> On Mon, Aug 29, 2016 at 12:41:16AM -0700, Christoph Hellwig wrote:
> > 
> > We're going to move forward killing buffer_heads in XFS.  I think ext4
> > would dramatically benefit from this a well, as would ext2 (although I
> > think all that DAX work in ext2 is a horrible idea to start with).
> 
> It's been on my todo list.  The only reason why I haven't done it yet
> is because I knew you were working on a solution, and I didn't want to
> do things one way for buffered I/O, and a different way for Direct
> I/O, and disentangling the DIO code and the different assumptions of
> how different file systems interact with the DIO code is a *mess*.
> 
> It may have gotten better more recently, but a few years ago I took a
> look at it and backed slowly away.....

Ted, what do you think of the idea of moving to struct iomap in ext2?

If ext2 stays with the current struct buffer_head + get_block_t interface,
then it looks like DAX basically has three options:

1) Support two I/O paths and two versions of each of the fault paths (PTE,
PMD, etc).  One of each of these would be based on struct iomap and would be
used by xfs and potentially ext4, and the other would be based on struct
buffer_head + get_block_t and would be used by ext2.

2) Only have a single struct iomap based I/O path and fault path, and add
shim/support code so that ext2 can use it, leaving the rest of ext2 to be
struct buffer_head + get_block_t based.

3) Only have a single struct buffer_head + get_block_t based DAX I/O and fault
path, and have XFS and potentially ext4 do the translation from their native
struct iomap interface.

It seems ideal for ext2 to switch along with everyone else, if getting rid of
struct buffer_head is a global goal.  If not, I guess barring technical issues
#2 above seems cleanest - move DAX to the new structure, and provide backwards
compatibility to ext2.  Thoughts?

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Mon, Aug 29, 2016 at 08:57:41AM -0400, Theodore Ts'o wrote:
> On Mon, Aug 29, 2016 at 12:41:16AM -0700, Christoph Hellwig wrote:
> > 
> > We're going to move forward killing buffer_heads in XFS.  I think ext4
> > would dramatically benefit from this a well, as would ext2 (although I
> > think all that DAX work in ext2 is a horrible idea to start with).
> 
> It's been on my todo list.  The only reason why I haven't done it yet
> is because I knew you were working on a solution, and I didn't want to
> do things one way for buffered I/O, and a different way for Direct
> I/O, and disentangling the DIO code and the different assumptions of
> how different file systems interact with the DIO code is a *mess*.
> 
> It may have gotten better more recently, but a few years ago I took a
> look at it and backed slowly away.....

Ted, what do you think of the idea of moving to struct iomap in ext2?

If ext2 stays with the current struct buffer_head + get_block_t interface,
then it looks like DAX basically has three options:

1) Support two I/O paths and two versions of each of the fault paths (PTE,
PMD, etc).  One of each of these would be based on struct iomap and would be
used by xfs and potentially ext4, and the other would be based on struct
buffer_head + get_block_t and would be used by ext2.

2) Only have a single struct iomap based I/O path and fault path, and add
shim/support code so that ext2 can use it, leaving the rest of ext2 to be
struct buffer_head + get_block_t based.

3) Only have a single struct buffer_head + get_block_t based DAX I/O and fault
path, and have XFS and potentially ext4 do the translation from their native
struct iomap interface.

It seems ideal for ext2 to switch along with everyone else, if getting rid of
struct buffer_head is a global goal.  If not, I guess barring technical issues
#2 above seems cleanest - move DAX to the new structure, and provide backwards
compatibility to ext2.  Thoughts?

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

I feel like we're not only building on shifting sands, but we haven't decided whether we're building a Pyramid or a Sphinx.

I thought after Storage Summit, we had broad agreement that we were moving to a primary DAX API that was not BH (nor indeed iomap) based.  We would still have DAX helpers for block based filesystems (because duplicating all that code between filesystems is pointless), but I now know of three filesystems which are not block based that are interested in using DAX.  Jared Hulbert's AXFS is a nice public example.

I posted a prototype of this here:

https://groups.google.com/d/msg/linux.kernel/xFFHVCQM7Go/ZQeDVYTnFgAJ

It is, of course, woefully out of date, but some of the principles in it are still good (and I'm working to split it into digestible chunks).

The essence:

1. VFS or VM calls filesystem (eg ->fault()) 
2. Filesystem calls DAX (eg dax_fault()) 
3. DAX looks in radix tree, finds no information. 
4. DAX calls (NEW!) mapping->a_ops->populate_pfns 
5a. Filesystem (if not block based) does its own thing to find out the PFNs corresponding to the requested range, then inserts them into the radix tree (possible helper in DAX code)
5b. Filesystem (if block based) looks up its internal data structure (eg extent tree) and 
   calls dax_create_pfns() (see giant patch from yesterday, only instead of 
   passing a get_block_t, the filesystem has already filled in a bh which 
   describes the entire extent that this access happens to land in). 
6b. DAX takes care of calling bdev_direct_access() from dax_create_pfns().

Now, notice that there's no interaction with the rest of the filesystem here.  We can swap out BHs and iomaps relatively trivially; there's no call for making grand changes, like converting ext2 over to iomap.  The BH or iomap is only used for communicating the extent from the filesystem to DAX.

Do we have agreement that this is the right way to go?

-----Original Message-----
From: Ross Zwisler [mailto:ross.zwisler@linux.intel.com] 
Sent: Friday, September 9, 2016 12:48 PM
To: Theodore Ts'o <tytso@mit.edu>; Christoph Hellwig <hch@infradead.org>; Ross Zwisler <ross.zwisler@linux.intel.com>; linux-kernel@vger.kernel.org; Andrew Morton <akpm@linux-foundation.org>; linux-nvdimm@ml01.01.org; Matthew Wilcox <mawilcox@microsoft.com>; Dave Chinner <david@fromorbit.com>; linux-mm@kvack.org; Andreas Dilger <adilger.kernel@dilger.ca>; Alexander Viro <viro@zeniv.linux.org.uk>; Jan Kara <jack@suse.com>; linux-fsdevel@vger.kernel.org; linux-ext4@vger.kernel.org
Subject: Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

On Mon, Aug 29, 2016 at 08:57:41AM -0400, Theodore Ts'o wrote:
> On Mon, Aug 29, 2016 at 12:41:16AM -0700, Christoph Hellwig wrote:
> > 
> > We're going to move forward killing buffer_heads in XFS.  I think ext4
> > would dramatically benefit from this a well, as would ext2 (although I
> > think all that DAX work in ext2 is a horrible idea to start with).
> 
> It's been on my todo list.  The only reason why I haven't done it yet
> is because I knew you were working on a solution, and I didn't want to
> do things one way for buffered I/O, and a different way for Direct
> I/O, and disentangling the DIO code and the different assumptions of
> how different file systems interact with the DIO code is a *mess*.
> 
> It may have gotten better more recently, but a few years ago I took a
> look at it and backed slowly away.....

Ted, what do you think of the idea of moving to struct iomap in ext2?

If ext2 stays with the current struct buffer_head + get_block_t interface,
then it looks like DAX basically has three options:

1) Support two I/O paths and two versions of each of the fault paths (PTE,
PMD, etc).  One of each of these would be based on struct iomap and would be
used by xfs and potentially ext4, and the other would be based on struct
buffer_head + get_block_t and would be used by ext2.

2) Only have a single struct iomap based I/O path and fault path, and add
shim/support code so that ext2 can use it, leaving the rest of ext2 to be
struct buffer_head + get_block_t based.

3) Only have a single struct buffer_head + get_block_t based DAX I/O and fault
path, and have XFS and potentially ext4 do the translation from their native
struct iomap interface.

It seems ideal for ext2 to switch along with everyone else, if getting rid of
struct buffer_head is a global goal.  If not, I guess barring technical issues
#2 above seems cleanest - move DAX to the new structure, and provide backwards
compatibility to ext2.  Thoughts?

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

I feel like we're not only building on shifting sands, but we haven't decided whether we're building a Pyramid or a Sphinx.

I thought after Storage Summit, we had broad agreement that we were moving to a primary DAX API that was not BH (nor indeed iomap) based.  We would still have DAX helpers for block based filesystems (because duplicating all that code between filesystems is pointless), but I now know of three filesystems which are not block based that are interested in using DAX.  Jared Hulbert's AXFS is a nice public example.

I posted a prototype of this here:

https://groups.google.com/d/msg/linux.kernel/xFFHVCQM7Go/ZQeDVYTnFgAJ

It is, of course, woefully out of date, but some of the principles in it are still good (and I'm working to split it into digestible chunks).

The essence:

1. VFS or VM calls filesystem (eg ->fault()) 
2. Filesystem calls DAX (eg dax_fault()) 
3. DAX looks in radix tree, finds no information. 
4. DAX calls (NEW!) mapping->a_ops->populate_pfns 
5a. Filesystem (if not block based) does its own thing to find out the PFNs corresponding to the requested range, then inserts them into the radix tree (possible helper in DAX code)
5b. Filesystem (if block based) looks up its internal data structure (eg extent tree) and 
   calls dax_create_pfns() (see giant patch from yesterday, only instead of 
   passing a get_block_t, the filesystem has already filled in a bh which 
   describes the entire extent that this access happens to land in). 
6b. DAX takes care of calling bdev_direct_access() from dax_create_pfns().

Now, notice that there's no interaction with the rest of the filesystem here.  We can swap out BHs and iomaps relatively trivially; there's no call for making grand changes, like converting ext2 over to iomap.  The BH or iomap is only used for communicating the extent from the filesystem to DAX.

Do we have agreement that this is the right way to go?

-----Original Message-----
From: Ross Zwisler [mailto:ross.zwisler@linux.intel.com] 
Sent: Friday, September 9, 2016 12:48 PM
To: Theodore Ts'o <tytso@mit.edu>; Christoph Hellwig <hch@infradead.org>; Ross Zwisler <ross.zwisler@linux.intel.com>; linux-kernel@vger.kernel.org; Andrew Morton <akpm@linux-foundation.org>; linux-nvdimm@ml01.01.org; Matthew Wilcox <mawilcox@microsoft.com>; Dave Chinner <david@fromorbit.com>; linux-mm@kvack.org; Andreas Dilger <adilger.kernel@dilger.ca>; Alexander Viro <viro@zeniv.linux.org.uk>; Jan Kara <jack@suse.com>; linux-fsdevel@vger.kernel.org; linux-ext4@vger.kernel.org
Subject: Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

On Mon, Aug 29, 2016 at 08:57:41AM -0400, Theodore Ts'o wrote:
> On Mon, Aug 29, 2016 at 12:41:16AM -0700, Christoph Hellwig wrote:
> > 
> > We're going to move forward killing buffer_heads in XFS.  I think ext4
> > would dramatically benefit from this a well, as would ext2 (although I
> > think all that DAX work in ext2 is a horrible idea to start with).
> 
> It's been on my todo list.  The only reason why I haven't done it yet
> is because I knew you were working on a solution, and I didn't want to
> do things one way for buffered I/O, and a different way for Direct
> I/O, and disentangling the DIO code and the different assumptions of
> how different file systems interact with the DIO code is a *mess*.
> 
> It may have gotten better more recently, but a few years ago I took a
> look at it and backed slowly away.....

Ted, what do you think of the idea of moving to struct iomap in ext2?

If ext2 stays with the current struct buffer_head + get_block_t interface,
then it looks like DAX basically has three options:

1) Support two I/O paths and two versions of each of the fault paths (PTE,
PMD, etc).  One of each of these would be based on struct iomap and would be
used by xfs and potentially ext4, and the other would be based on struct
buffer_head + get_block_t and would be used by ext2.

2) Only have a single struct iomap based I/O path and fault path, and add
shim/support code so that ext2 can use it, leaving the rest of ext2 to be
struct buffer_head + get_block_t based.

3) Only have a single struct buffer_head + get_block_t based DAX I/O and fault
path, and have XFS and potentially ext4 do the translation from their native
struct iomap interface.

It seems ideal for ext2 to switch along with everyone else, if getting rid of
struct buffer_head is a global goal.  If not, I guess barring technical issues
#2 above seems cleanest - move DAX to the new structure, and provide backwards
compatibility to ext2.  Thoughts?

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Dan Williams]

/me grumbles about top-posting...

On Fri, Sep 9, 2016 at 1:35 PM, Matthew Wilcox <mawilcox-0li6OtcxBFHby3iVrkZq2A@public.gmane.org> wrote:
> I feel like we're not only building on shifting sands, but we haven't decided whether we're building a Pyramid or a Sphinx.
>
> I thought after Storage Summit, we had broad agreement that we were moving to a primary DAX API that was not BH (nor indeed iomap) based.  We would still have DAX helpers for block based filesystems (because duplicating all that code between filesystems is pointless), but I now know of three filesystems which are not block based that are interested in using DAX.  Jared Hulbert's AXFS is a nice public example.
>
> I posted a prototype of this here:
>
> https://groups.google.com/d/msg/linux.kernel/xFFHVCQM7Go/ZQeDVYTnFgAJ
>
> It is, of course, woefully out of date, but some of the principles in it are still good (and I'm working to split it into digestible chunks).
>
> The essence:
>
> 1. VFS or VM calls filesystem (eg ->fault())
> 2. Filesystem calls DAX (eg dax_fault())
> 3. DAX looks in radix tree, finds no information.
> 4. DAX calls (NEW!) mapping->a_ops->populate_pfns
> 5a. Filesystem (if not block based) does its own thing to find out the PFNs corresponding to the requested range, then inserts them into the radix tree (possible helper in DAX code)
> 5b. Filesystem (if block based) looks up its internal data structure (eg extent tree) and
>    calls dax_create_pfns() (see giant patch from yesterday, only instead of
>    passing a get_block_t, the filesystem has already filled in a bh which
>    describes the entire extent that this access happens to land in).
> 6b. DAX takes care of calling bdev_direct_access() from dax_create_pfns().
>
> Now, notice that there's no interaction with the rest of the filesystem here.  We can swap out BHs and iomaps relatively trivially; there's no call for making grand changes, like converting ext2 over to iomap.  The BH or iomap is only used for communicating the extent from the filesystem to DAX.
>
> Do we have agreement that this is the right way to go?

My $0.02...

So the current dax implementation is still struggling to get right
(pmd faulting, dirty entry cleaning, etc) and this seems like a
rewrite that sets us up for future features without addressing the
current bugs and todo items.  In comparison the iomap conversion work
seems incremental and conserving of current development momentum.

I agree with you that continuing to touch ext2 is not a good idea, but
I'm not yet convinced that now is the time to go do dax-2.0 when we
haven't finished shipping dax-1.0.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Dan Williams]

/me grumbles about top-posting...

On Fri, Sep 9, 2016 at 1:35 PM, Matthew Wilcox <mawilcox@microsoft.com> wrote:
> I feel like we're not only building on shifting sands, but we haven't decided whether we're building a Pyramid or a Sphinx.
>
> I thought after Storage Summit, we had broad agreement that we were moving to a primary DAX API that was not BH (nor indeed iomap) based.  We would still have DAX helpers for block based filesystems (because duplicating all that code between filesystems is pointless), but I now know of three filesystems which are not block based that are interested in using DAX.  Jared Hulbert's AXFS is a nice public example.
>
> I posted a prototype of this here:
>
> https://groups.google.com/d/msg/linux.kernel/xFFHVCQM7Go/ZQeDVYTnFgAJ
>
> It is, of course, woefully out of date, but some of the principles in it are still good (and I'm working to split it into digestible chunks).
>
> The essence:
>
> 1. VFS or VM calls filesystem (eg ->fault())
> 2. Filesystem calls DAX (eg dax_fault())
> 3. DAX looks in radix tree, finds no information.
> 4. DAX calls (NEW!) mapping->a_ops->populate_pfns
> 5a. Filesystem (if not block based) does its own thing to find out the PFNs corresponding to the requested range, then inserts them into the radix tree (possible helper in DAX code)
> 5b. Filesystem (if block based) looks up its internal data structure (eg extent tree) and
>    calls dax_create_pfns() (see giant patch from yesterday, only instead of
>    passing a get_block_t, the filesystem has already filled in a bh which
>    describes the entire extent that this access happens to land in).
> 6b. DAX takes care of calling bdev_direct_access() from dax_create_pfns().
>
> Now, notice that there's no interaction with the rest of the filesystem here.  We can swap out BHs and iomaps relatively trivially; there's no call for making grand changes, like converting ext2 over to iomap.  The BH or iomap is only used for communicating the extent from the filesystem to DAX.
>
> Do we have agreement that this is the right way to go?

My $0.02...

So the current dax implementation is still struggling to get right
(pmd faulting, dirty entry cleaning, etc) and this seems like a
rewrite that sets us up for future features without addressing the
current bugs and todo items.  In comparison the iomap conversion work
seems incremental and conserving of current development momentum.

I agree with you that continuing to touch ext2 is not a good idea, but
I'm not yet convinced that now is the time to go do dax-2.0 when we
haven't finished shipping dax-1.0.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Dan Williams]

/me grumbles about top-posting...

On Fri, Sep 9, 2016 at 1:35 PM, Matthew Wilcox <mawilcox@microsoft.com> wrote:
> I feel like we're not only building on shifting sands, but we haven't decided whether we're building a Pyramid or a Sphinx.
>
> I thought after Storage Summit, we had broad agreement that we were moving to a primary DAX API that was not BH (nor indeed iomap) based.  We would still have DAX helpers for block based filesystems (because duplicating all that code between filesystems is pointless), but I now know of three filesystems which are not block based that are interested in using DAX.  Jared Hulbert's AXFS is a nice public example.
>
> I posted a prototype of this here:
>
> https://groups.google.com/d/msg/linux.kernel/xFFHVCQM7Go/ZQeDVYTnFgAJ
>
> It is, of course, woefully out of date, but some of the principles in it are still good (and I'm working to split it into digestible chunks).
>
> The essence:
>
> 1. VFS or VM calls filesystem (eg ->fault())
> 2. Filesystem calls DAX (eg dax_fault())
> 3. DAX looks in radix tree, finds no information.
> 4. DAX calls (NEW!) mapping->a_ops->populate_pfns
> 5a. Filesystem (if not block based) does its own thing to find out the PFNs corresponding to the requested range, then inserts them into the radix tree (possible helper in DAX code)
> 5b. Filesystem (if block based) looks up its internal data structure (eg extent tree) and
>    calls dax_create_pfns() (see giant patch from yesterday, only instead of
>    passing a get_block_t, the filesystem has already filled in a bh which
>    describes the entire extent that this access happens to land in).
> 6b. DAX takes care of calling bdev_direct_access() from dax_create_pfns().
>
> Now, notice that there's no interaction with the rest of the filesystem here.  We can swap out BHs and iomaps relatively trivially; there's no call for making grand changes, like converting ext2 over to iomap.  The BH or iomap is only used for communicating the extent from the filesystem to DAX.
>
> Do we have agreement that this is the right way to go?

My $0.02...

So the current dax implementation is still struggling to get right
(pmd faulting, dirty entry cleaning, etc) and this seems like a
rewrite that sets us up for future features without addressing the
current bugs and todo items.  In comparison the iomap conversion work
seems incremental and conserving of current development momentum.

I agree with you that continuing to touch ext2 is not a good idea, but
I'm not yet convinced that now is the time to go do dax-2.0 when we
haven't finished shipping dax-1.0.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Fri, Sep 09, 2016 at 03:34:43PM -0700, Dan Williams wrote:
> I agree with you that continuing to touch ext2 is not a good idea, but
> I'm not yet convinced that now is the time to go do dax-2.0 when we
> haven't finished shipping dax-1.0.

I've mentioned this before, but I'd like to repeat it.  With all the
work reqwuired in the file system I would prefer to drop DAX support
in ext2 (and if people really cry for it reinstate the trivial old xip
support).

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Fri, Sep 09, 2016 at 03:34:43PM -0700, Dan Williams wrote:
> I agree with you that continuing to touch ext2 is not a good idea, but
> I'm not yet convinced that now is the time to go do dax-2.0 when we
> haven't finished shipping dax-1.0.

I've mentioned this before, but I'd like to repeat it.  With all the
work reqwuired in the file system I would prefer to drop DAX support
in ext2 (and if people really cry for it reinstate the trivial old xip
support).

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Fri, Sep 09, 2016 at 03:34:43PM -0700, Dan Williams wrote:
> I agree with you that continuing to touch ext2 is not a good idea, but
> I'm not yet convinced that now is the time to go do dax-2.0 when we
> haven't finished shipping dax-1.0.

I've mentioned this before, but I'd like to repeat it.  With all the
work reqwuired in the file system I would prefer to drop DAX support
in ext2 (and if people really cry for it reinstate the trivial old xip
support).

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Christoph Hellwig [mailto:hch@infradead.org]
> On Fri, Sep 09, 2016 at 03:34:43PM -0700, Dan Williams wrote:
> > I agree with you that continuing to touch ext2 is not a good idea, but
> > I'm not yet convinced that now is the time to go do dax-2.0 when we
> > haven't finished shipping dax-1.0.
> 
> I've mentioned this before, but I'd like to repeat it.  With all the work reqwuired
> in the file system I would prefer to drop DAX support in ext2 (and if people
> really cry for it reinstate the trivial old xip support).

That allegedly trivial old xip support was horrendously broken.  And, er, it used an aop
which you seem implacably opposed to in your earlier email.  And that was truly a
disgusting one from a layering point of view.  Let me remind you:

-       int (*get_xip_mem)(struct address_space *, pgoff_t, int,
-                                               void **, unsigned long *);

That void ** was an 'out' parameter to store a kernel address for the memory.  The
unsigned long * was also an 'out' parameter to store the PFN for the memory.  The
'int' was actually a Boolean for whether to create or not, but you'd actually have to
go look at the implementation to find that out; the documentation never said it.  A
real dog's breakfast of an API.

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Christoph Hellwig [mailto:hch@infradead.org]
> On Fri, Sep 09, 2016 at 03:34:43PM -0700, Dan Williams wrote:
> > I agree with you that continuing to touch ext2 is not a good idea, but
> > I'm not yet convinced that now is the time to go do dax-2.0 when we
> > haven't finished shipping dax-1.0.
> 
> I've mentioned this before, but I'd like to repeat it.  With all the work reqwuired
> in the file system I would prefer to drop DAX support in ext2 (and if people
> really cry for it reinstate the trivial old xip support).

That allegedly trivial old xip support was horrendously broken.  And, er, it used an aop
which you seem implacably opposed to in your earlier email.  And that was truly a
disgusting one from a layering point of view.  Let me remind you:

-       int (*get_xip_mem)(struct address_space *, pgoff_t, int,
-                                               void **, unsigned long *);

That void ** was an 'out' parameter to store a kernel address for the memory.  The
unsigned long * was also an 'out' parameter to store the PFN for the memory.  The
'int' was actually a Boolean for whether to create or not, but you'd actually have to
go look at the implementation to find that out; the documentation never said it.  A
real dog's breakfast of an API.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Theodore Ts'o]

On Sat, Sep 10, 2016 at 12:31:51AM -0700, Christoph Hellwig wrote:
> I've mentioned this before, but I'd like to repeat it.  With all the
> work reqwuired in the file system I would prefer to drop DAX support
> in ext2 (and if people really cry for it reinstate the trivial old xip
> support).

Why is so much work required to support the new DAX interfaces in
ext2?  Is that unique to ext2, or is adding DAX support just going to
be painful for all file systems?  Hopefully it's not the latter,
right?

						- Ted

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Theodore Ts'o]

On Sat, Sep 10, 2016 at 12:31:51AM -0700, Christoph Hellwig wrote:
> I've mentioned this before, but I'd like to repeat it.  With all the
> work reqwuired in the file system I would prefer to drop DAX support
> in ext2 (and if people really cry for it reinstate the trivial old xip
> support).

Why is so much work required to support the new DAX interfaces in
ext2?  Is that unique to ext2, or is adding DAX support just going to
be painful for all file systems?  Hopefully it's not the latter,
right?

						- Ted

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Theodore Ts'o [mailto:tytso-3s7WtUTddSA@public.gmane.org]
> On Sat, Sep 10, 2016 at 12:31:51AM -0700, Christoph Hellwig wrote:
> > I've mentioned this before, but I'd like to repeat it.  With all the
> > work reqwuired in the file system I would prefer to drop DAX support
> > in ext2 (and if people really cry for it reinstate the trivial old xip
> > support).
> 
> Why is so much work required to support the new DAX interfaces in
> ext2?  Is that unique to ext2, or is adding DAX support just going to
> be painful for all file systems?  Hopefully it's not the latter,
> right?

It's always been my goal to make supporting DAX as easy as possible
for the filesystem.  Hence the sharing of the DIO locking, and the (it
turned out) premature reliance on helper functions.  It's more complex
than I wanted it to be right now, and I hope we get to simplify it again.

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Theodore Ts'o [mailto:tytso@mit.edu]
> On Sat, Sep 10, 2016 at 12:31:51AM -0700, Christoph Hellwig wrote:
> > I've mentioned this before, but I'd like to repeat it.  With all the
> > work reqwuired in the file system I would prefer to drop DAX support
> > in ext2 (and if people really cry for it reinstate the trivial old xip
> > support).
> 
> Why is so much work required to support the new DAX interfaces in
> ext2?  Is that unique to ext2, or is adding DAX support just going to
> be painful for all file systems?  Hopefully it's not the latter,
> right?

It's always been my goal to make supporting DAX as easy as possible
for the filesystem.  Hence the sharing of the DIO locking, and the (it
turned out) premature reliance on helper functions.  It's more complex
than I wanted it to be right now, and I hope we get to simplify it again.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Theodore Ts'o [mailto:tytso@mit.edu]
> On Sat, Sep 10, 2016 at 12:31:51AM -0700, Christoph Hellwig wrote:
> > I've mentioned this before, but I'd like to repeat it.  With all the
> > work reqwuired in the file system I would prefer to drop DAX support
> > in ext2 (and if people really cry for it reinstate the trivial old xip
> > support).
> 
> Why is so much work required to support the new DAX interfaces in
> ext2?  Is that unique to ext2, or is adding DAX support just going to
> be painful for all file systems?  Hopefully it's not the latter,
> right?

It's always been my goal to make supporting DAX as easy as possible
for the filesystem.  Hence the sharing of the DIO locking, and the (it
turned out) premature reliance on helper functions.  It's more complex
than I wanted it to be right now, and I hope we get to simplify it again.

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Dan Williams [mailto:dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org]
> /me grumbles about top-posting...

Let's see if this does any better .. there's lots of new features, but I don't see a 'wrap lines at 80 columns' option.  Unfortunately.

> On Fri, Sep 9, 2016 at 1:35 PM, Matthew Wilcox <mawilcox-0li6OtcxBFHby3iVrkZq2A@public.gmane.org>
> wrote:
> > I thought after Storage Summit, we had broad agreement that we were
> > moving to a primary DAX API that was not BH (nor indeed iomap) based.  We
> > would still have DAX helpers for block based filesystems (because duplicating
> > all that code between filesystems is pointless), but I now know of three
> > filesystems which are not block based that are interested in using DAX.  Jared
> > Hulbert's AXFS is a nice public example.
> >
> > I posted a prototype of this here:
> >
> >
> https://groups.google.com/d/msg/linux.kernel/xFFHVCQM7Go/ZQeDVYTnFgAJ
> >
> > It is, of course, woefully out of date, but some of the principles in it are still
> good (and I'm working to split it into digestible chunks).
> >
> > The essence:
> >
> > 1. VFS or VM calls filesystem (eg ->fault()) 2. Filesystem calls DAX
> > (eg dax_fault()) 3. DAX looks in radix tree, finds no information.
> > 4. DAX calls (NEW!) mapping->a_ops->populate_pfns 5a. Filesystem (if
> > not block based) does its own thing to find out the PFNs corresponding
> > to the requested range, then inserts them into the radix tree (possible helper
> in DAX code) 5b. Filesystem (if block based) looks up its internal data structure
> (eg extent tree) and
> >    calls dax_create_pfns() (see giant patch from yesterday, only instead of
> >    passing a get_block_t, the filesystem has already filled in a bh which
> >    describes the entire extent that this access happens to land in).
> > 6b. DAX takes care of calling bdev_direct_access() from dax_create_pfns().
> >
> > Now, notice that there's no interaction with the rest of the filesystem here.
> We can swap out BHs and iomaps relatively trivially; there's no call for making
> grand changes, like converting ext2 over to iomap.  The BH or iomap is only
> used for communicating the extent from the filesystem to DAX.
> >
> > Do we have agreement that this is the right way to go?
> 
> My $0.02...
> 
> So the current dax implementation is still struggling to get right (pmd faulting,
> dirty entry cleaning, etc) and this seems like a rewrite that sets us up for future
> features without addressing the current bugs and todo items.  In comparison
> the iomap conversion work seems incremental and conserving of current
> development momentum.

I believe your assessment is incorrect.  If converting the current DAX code to
use iomap forces converting ext2, then it's time to get rid of all the half-measures
currently in place.  You left off one todo item that this does get us a step closer to
fixing -- support for DMA to mmaped DAX files.  I think it also puts us in a better
position to fix the 2MB support, locking, and dirtiness tracking.  Oh, and it does
fix the multivolume support (because the sectors in the radix tree could be
interpreted as being from the wrong volume).

> I agree with you that continuing to touch ext2 is not a good idea, but I'm not
> yet convinced that now is the time to go do dax-2.0 when we haven't finished
> shipping dax-1.0.

dax-1.0 died long ago ... I think we're up to at least DAX version 4 by now.

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 3540 bytes --]

From: Dan Williams [mailto:dan.j.williams@intel.com]
> /me grumbles about top-posting...

Let's see if this does any better .. there's lots of new features, but I don't see a 'wrap lines at 80 columns' option.  Unfortunately.

> On Fri, Sep 9, 2016 at 1:35 PM, Matthew Wilcox <mawilcox@microsoft.com>
> wrote:
> > I thought after Storage Summit, we had broad agreement that we were
> > moving to a primary DAX API that was not BH (nor indeed iomap) based.  We
> > would still have DAX helpers for block based filesystems (because duplicating
> > all that code between filesystems is pointless), but I now know of three
> > filesystems which are not block based that are interested in using DAX.  Jared
> > Hulbert's AXFS is a nice public example.
> >
> > I posted a prototype of this here:
> >
> >
> https://groups.google.com/d/msg/linux.kernel/xFFHVCQM7Go/ZQeDVYTnFgAJ
> >
> > It is, of course, woefully out of date, but some of the principles in it are still
> good (and I'm working to split it into digestible chunks).
> >
> > The essence:
> >
> > 1. VFS or VM calls filesystem (eg ->fault()) 2. Filesystem calls DAX
> > (eg dax_fault()) 3. DAX looks in radix tree, finds no information.
> > 4. DAX calls (NEW!) mapping->a_ops->populate_pfns 5a. Filesystem (if
> > not block based) does its own thing to find out the PFNs corresponding
> > to the requested range, then inserts them into the radix tree (possible helper
> in DAX code) 5b. Filesystem (if block based) looks up its internal data structure
> (eg extent tree) and
> >    calls dax_create_pfns() (see giant patch from yesterday, only instead of
> >    passing a get_block_t, the filesystem has already filled in a bh which
> >    describes the entire extent that this access happens to land in).
> > 6b. DAX takes care of calling bdev_direct_access() from dax_create_pfns().
> >
> > Now, notice that there's no interaction with the rest of the filesystem here.
> We can swap out BHs and iomaps relatively trivially; there's no call for making
> grand changes, like converting ext2 over to iomap.  The BH or iomap is only
> used for communicating the extent from the filesystem to DAX.
> >
> > Do we have agreement that this is the right way to go?
> 
> My $0.02...
> 
> So the current dax implementation is still struggling to get right (pmd faulting,
> dirty entry cleaning, etc) and this seems like a rewrite that sets us up for future
> features without addressing the current bugs and todo items.  In comparison
> the iomap conversion work seems incremental and conserving of current
> development momentum.

I believe your assessment is incorrect.  If converting the current DAX code to
use iomap forces converting ext2, then it's time to get rid of all the half-measures
currently in place.  You left off one todo item that this does get us a step closer to
fixing -- support for DMA to mmaped DAX files.  I think it also puts us in a better
position to fix the 2MB support, locking, and dirtiness tracking.  Oh, and it does
fix the multivolume support (because the sectors in the radix tree could be
interpreted as being from the wrong volume).

> I agree with you that continuing to touch ext2 is not a good idea, but I'm not
> yet convinced that now is the time to go do dax-2.0 when we haven't finished
> shipping dax-1.0.

dax-1.0 died long ago ... I think we're up to at least DAX version 4 by now.

N‹§²æìr¸›zǧu©ž²Æ {\b­†éì¹»\x1c®&Þ–)îÆi¢žØ^n‡r¶‰šŽŠÝ¢j$½§$¢¸\x05¢¹¨­è§~Š'.)îÄÃ,yèm¶ŸÿÃ\f%Š{±šj+ƒðèž×¦j)Z†·Ÿ

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Dan Williams [mailto:dan.j.williams@intel.com]
> /me grumbles about top-posting...

Let's see if this does any better .. there's lots of new features, but I don't see a 'wrap lines at 80 columns' option.  Unfortunately.

> On Fri, Sep 9, 2016 at 1:35 PM, Matthew Wilcox <mawilcox@microsoft.com>
> wrote:
> > I thought after Storage Summit, we had broad agreement that we were
> > moving to a primary DAX API that was not BH (nor indeed iomap) based.  We
> > would still have DAX helpers for block based filesystems (because duplicating
> > all that code between filesystems is pointless), but I now know of three
> > filesystems which are not block based that are interested in using DAX.  Jared
> > Hulbert's AXFS is a nice public example.
> >
> > I posted a prototype of this here:
> >
> >
> https://groups.google.com/d/msg/linux.kernel/xFFHVCQM7Go/ZQeDVYTnFgAJ
> >
> > It is, of course, woefully out of date, but some of the principles in it are still
> good (and I'm working to split it into digestible chunks).
> >
> > The essence:
> >
> > 1. VFS or VM calls filesystem (eg ->fault()) 2. Filesystem calls DAX
> > (eg dax_fault()) 3. DAX looks in radix tree, finds no information.
> > 4. DAX calls (NEW!) mapping->a_ops->populate_pfns 5a. Filesystem (if
> > not block based) does its own thing to find out the PFNs corresponding
> > to the requested range, then inserts them into the radix tree (possible helper
> in DAX code) 5b. Filesystem (if block based) looks up its internal data structure
> (eg extent tree) and
> >    calls dax_create_pfns() (see giant patch from yesterday, only instead of
> >    passing a get_block_t, the filesystem has already filled in a bh which
> >    describes the entire extent that this access happens to land in).
> > 6b. DAX takes care of calling bdev_direct_access() from dax_create_pfns().
> >
> > Now, notice that there's no interaction with the rest of the filesystem here.
> We can swap out BHs and iomaps relatively trivially; there's no call for making
> grand changes, like converting ext2 over to iomap.  The BH or iomap is only
> used for communicating the extent from the filesystem to DAX.
> >
> > Do we have agreement that this is the right way to go?
> 
> My $0.02...
> 
> So the current dax implementation is still struggling to get right (pmd faulting,
> dirty entry cleaning, etc) and this seems like a rewrite that sets us up for future
> features without addressing the current bugs and todo items.  In comparison
> the iomap conversion work seems incremental and conserving of current
> development momentum.

I believe your assessment is incorrect.  If converting the current DAX code to
use iomap forces converting ext2, then it's time to get rid of all the half-measures
currently in place.  You left off one todo item that this does get us a step closer to
fixing -- support for DMA to mmaped DAX files.  I think it also puts us in a better
position to fix the 2MB support, locking, and dirtiness tracking.  Oh, and it does
fix the multivolume support (because the sectors in the radix tree could be
interpreted as being from the wrong volume).

> I agree with you that continuing to touch ext2 is not a good idea, but I'm not
> yet convinced that now is the time to go do dax-2.0 when we haven't finished
> shipping dax-1.0.

dax-1.0 died long ago ... I think we're up to at least DAX version 4 by now.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Dan Williams]

On Sat, Sep 10, 2016 at 1:15 AM, Matthew Wilcox <mawilcox@microsoft.com> wrote:
> From: Dan Williams [mailto:dan.j.williams@intel.com]
>> /me grumbles about top-posting...
>
> Let's see if this does any better .. there's lots of new features, but I don't see a 'wrap lines at 80 columns' option.  Unfortunately.

Much appreciated.

[..]
>> So the current dax implementation is still struggling to get right (pmd faulting,
>> dirty entry cleaning, etc) and this seems like a rewrite that sets us up for future
>> features without addressing the current bugs and todo items.  In comparison
>> the iomap conversion work seems incremental and conserving of current
>> development momentum.
>
> I believe your assessment is incorrect.  If converting the current DAX code to
> use iomap forces converting ext2, then it's time to get rid of all the half-measures
> currently in place.  You left off one todo item that this does get us a step closer to
> fixing -- support for DMA to mmaped DAX files.

I didn't leave that off, DMA is solved with devm_memremap_pages().
Now, DMA without the ~1.6% capacity tax for the memmap array is
interesting, but that's a new feature.

> I think it also puts us in a better
> position to fix the 2MB support, locking, and dirtiness tracking.  Oh, and it does
> fix the multivolume support (because the sectors in the radix tree could be
> interpreted as being from the wrong volume).
>
>> I agree with you that continuing to touch ext2 is not a good idea, but I'm not
>> yet convinced that now is the time to go do dax-2.0 when we haven't finished
>> shipping dax-1.0.
>
> dax-1.0 died long ago ... I think we're up to at least DAX version 4 by now.

My point is that I want to address the current slate of problems
before solving new questions like "how do we support non-block based
filesystems?".  We just happened to land DAX in the middle of the
in-progress buffer_head removal effort, so DAX should not stand in the
way of where filesystems were already going.  I'm arguing to complete
all the false starts and half measures that are presently in DAX and
then look to incrementally evolve the interfaces to something new
without regressing any of it.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Dan Williams]

On Sat, Sep 10, 2016 at 1:15 AM, Matthew Wilcox <mawilcox@microsoft.com> wrote:
> From: Dan Williams [mailto:dan.j.williams@intel.com]
>> /me grumbles about top-posting...
>
> Let's see if this does any better .. there's lots of new features, but I don't see a 'wrap lines at 80 columns' option.  Unfortunately.

Much appreciated.

[..]
>> So the current dax implementation is still struggling to get right (pmd faulting,
>> dirty entry cleaning, etc) and this seems like a rewrite that sets us up for future
>> features without addressing the current bugs and todo items.  In comparison
>> the iomap conversion work seems incremental and conserving of current
>> development momentum.
>
> I believe your assessment is incorrect.  If converting the current DAX code to
> use iomap forces converting ext2, then it's time to get rid of all the half-measures
> currently in place.  You left off one todo item that this does get us a step closer to
> fixing -- support for DMA to mmaped DAX files.

I didn't leave that off, DMA is solved with devm_memremap_pages().
Now, DMA without the ~1.6% capacity tax for the memmap array is
interesting, but that's a new feature.

> I think it also puts us in a better
> position to fix the 2MB support, locking, and dirtiness tracking.  Oh, and it does
> fix the multivolume support (because the sectors in the radix tree could be
> interpreted as being from the wrong volume).
>
>> I agree with you that continuing to touch ext2 is not a good idea, but I'm not
>> yet convinced that now is the time to go do dax-2.0 when we haven't finished
>> shipping dax-1.0.
>
> dax-1.0 died long ago ... I think we're up to at least DAX version 4 by now.

My point is that I want to address the current slate of problems
before solving new questions like "how do we support non-block based
filesystems?".  We just happened to land DAX in the middle of the
in-progress buffer_head removal effort, so DAX should not stand in the
way of where filesystems were already going.  I'm arguing to complete
all the false starts and half measures that are presently in DAX and
then look to incrementally evolve the interfaces to something new
without regressing any of it.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

The mail is basically unparsable (hint: you can use a sane mailer even
with exchange servers :)).

Either way we need to get rid of buffer_heads, and another aop that
is entirely caller specific is unaceptable.  That being said your idea
doesn't sounds unreasonable, but will require a bit more work and has
no real short-term need.

So let's revisit the idea once you have patches to post and move forward
with the more urgent needs for now.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

The mail is basically unparsable (hint: you can use a sane mailer even
with exchange servers :)).

Either way we need to get rid of buffer_heads, and another aop that
is entirely caller specific is unaceptable.  That being said your idea
doesn't sounds unreasonable, but will require a bit more work and has
no real short-term need.

So let's revisit the idea once you have patches to post and move forward
with the more urgent needs for now.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Christoph Hellwig [mailto:hch@infradead.org]
> The mail is basically unparsable (hint: you can use a sane mailer even with
> exchange servers :)).

That rather depends on how the Exchange servers are configured ... this isn't the
appropriate place to discuss IT issues though.

> Either way we need to get rid of buffer_heads, and another aop that is entirely
> caller specific is unaceptable.  That being said your idea doesn't sounds
> unreasonable, but will require a bit more work and has no real short-term
> need.

So your proposal is to remove buffer_heads from ext2?

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Christoph Hellwig [mailto:hch@infradead.org]
> The mail is basically unparsable (hint: you can use a sane mailer even with
> exchange servers :)).

That rather depends on how the Exchange servers are configured ... this isn't the
appropriate place to discuss IT issues though.

> Either way we need to get rid of buffer_heads, and another aop that is entirely
> caller specific is unaceptable.  That being said your idea doesn't sounds
> unreasonable, but will require a bit more work and has no real short-term
> need.

So your proposal is to remove buffer_heads from ext2?

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Sat, Sep 10, 2016 at 07:33:18AM +0000, Matthew Wilcox wrote:
> > caller specific is unaceptable.  That being said your idea doesn't sounds
> > unreasonable, but will require a bit more work and has no real short-term
> > need.
> 
> So your proposal is to remove buffer_heads from ext2?

No, the proposal is to remove buffer_heads from XFS first, then GFS2
and then maybe others like ext4.  I'd like to remove buffer_heads from
the DAX path for ext2 and ext4 entitrely for sure (and direct I/O next).

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Sat, Sep 10, 2016 at 07:33:18AM +0000, Matthew Wilcox wrote:
> > caller specific is unaceptable.  That being said your idea doesn't sounds
> > unreasonable, but will require a bit more work and has no real short-term
> > need.
> 
> So your proposal is to remove buffer_heads from ext2?

No, the proposal is to remove buffer_heads from XFS first, then GFS2
and then maybe others like ext4.  I'd like to remove buffer_heads from
the DAX path for ext2 and ext4 entitrely for sure (and direct I/O next).

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Christoph Hellwig [mailto:hch@infradead.org]
> On Sat, Sep 10, 2016 at 07:33:18AM +0000, Matthew Wilcox wrote:
> > > caller specific is unaceptable.  That being said your idea doesn't
> > > sounds unreasonable, but will require a bit more work and has no
> > > real short-term need.
> >
> > So your proposal is to remove buffer_heads from ext2?
> 
> No, the proposal is to remove buffer_heads from XFS first, then GFS2 and then
> maybe others like ext4.  I'd like to remove buffer_heads from the DAX path for
> ext2 and ext4 entitrely for sure (and direct I/O next).

That's ... what I propose.  The only use of buffer_head in my proposal is to
communicate a single extent from the filesystem to the DAX core, and that
can equally well use an iomap.  Ross seems to think that converting the current
DAX code over to using iomap requires converting all of ext2 away from
buffer_head; are you saying he's wrong?

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Christoph Hellwig [mailto:hch@infradead.org]
> On Sat, Sep 10, 2016 at 07:33:18AM +0000, Matthew Wilcox wrote:
> > > caller specific is unaceptable.  That being said your idea doesn't
> > > sounds unreasonable, but will require a bit more work and has no
> > > real short-term need.
> >
> > So your proposal is to remove buffer_heads from ext2?
> 
> No, the proposal is to remove buffer_heads from XFS first, then GFS2 and then
> maybe others like ext4.  I'd like to remove buffer_heads from the DAX path for
> ext2 and ext4 entitrely for sure (and direct I/O next).

That's ... what I propose.  The only use of buffer_head in my proposal is to
communicate a single extent from the filesystem to the DAX core, and that
can equally well use an iomap.  Ross seems to think that converting the current
DAX code over to using iomap requires converting all of ext2 away from
buffer_head; are you saying he's wrong?

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Sat, Sep 10, 2016 at 07:52:53AM +0000, Matthew Wilcox wrote:
> DAX code over to using iomap requires converting all of ext2 away from
> buffer_head; are you saying he's wrong?

Not sure if he's really saying that, but it's wrong for sure.  Just
to prove that I came up with a working ext2 iomap DAX implementation
in a few hours today.  I'll take a stab at ext4 and the block device
as well and will post the updated series early next week - I'll need
to take care of a few high priority todo list items first.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Sat, Sep 10, 2016 at 07:52:53AM +0000, Matthew Wilcox wrote:
> DAX code over to using iomap requires converting all of ext2 away from
> buffer_head; are you saying he's wrong?

Not sure if he's really saying that, but it's wrong for sure.  Just
to prove that I came up with a working ext2 iomap DAX implementation
in a few hours today.  I'll take a stab at ext4 and the block device
as well and will post the updated series early next week - I'll need
to take care of a few high priority todo list items first.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Christoph Hellwig]

On Sat, Sep 10, 2016 at 07:52:53AM +0000, Matthew Wilcox wrote:
> DAX code over to using iomap requires converting all of ext2 away from
> buffer_head; are you saying he's wrong?

Not sure if he's really saying that, but it's wrong for sure.  Just
to prove that I came up with a working ext2 iomap DAX implementation
in a few hours today.  I'll take a stab at ext4 and the block device
as well and will post the updated series early next week - I'll need
to take care of a few high priority todo list items first.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Sun, Sep 11, 2016 at 05:47:41AM -0700, Christoph Hellwig wrote:
> On Sat, Sep 10, 2016 at 07:52:53AM +0000, Matthew Wilcox wrote:
> > DAX code over to using iomap requires converting all of ext2 away from
> > buffer_head; are you saying he's wrong?
> 
> Not sure if he's really saying that, but it's wrong for sure.  Just
> to prove that I came up with a working ext2 iomap DAX implementation
> in a few hours today.  I'll take a stab at ext4 and the block device
> as well and will post the updated series early next week - I'll need
> to take care of a few high priority todo list items first.

Yay!  Sorry if I was unclear, I wasn't trying to say that we had to change all
of ext2 over to using struct iomap.  If we can (and apparently we can) just
switch over the DAX interfaces, that's good enough to me.  I understand that
this will mean that we may have overlapping DAX paths for a while (an iomap
version and a buffer_head version).  I just wanted to figure out whether this
overlap would need to be permanent - sounds like not, which is ideal.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Sun, Sep 11, 2016 at 05:47:41AM -0700, Christoph Hellwig wrote:
> On Sat, Sep 10, 2016 at 07:52:53AM +0000, Matthew Wilcox wrote:
> > DAX code over to using iomap requires converting all of ext2 away from
> > buffer_head; are you saying he's wrong?
> 
> Not sure if he's really saying that, but it's wrong for sure.  Just
> to prove that I came up with a working ext2 iomap DAX implementation
> in a few hours today.  I'll take a stab at ext4 and the block device
> as well and will post the updated series early next week - I'll need
> to take care of a few high priority todo list items first.

Yay!  Sorry if I was unclear, I wasn't trying to say that we had to change all
of ext2 over to using struct iomap.  If we can (and apparently we can) just
switch over the DAX interfaces, that's good enough to me.  I understand that
this will mean that we may have overlapping DAX paths for a while (an iomap
version and a buffer_head version).  I just wanted to figure out whether this
overlap would need to be permanent - sounds like not, which is ideal.

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Christoph Hellwig [mailto:hch@infradead.org]
> Either way we need to get rid of buffer_heads, and another aop that is entirely
> caller specific is unaceptable.

I finally figured out what you actually meant by this.  You mean that instead of having an aop->populate_pfn, you want to define a populate_pfn_t callback and pass it in.

Something like this:

int ext2_populate_pfn(struct address_space *mapping, pgoff_t pgoff)
{
	struct iomap iomap;
	...
	return dax_populate_pfn(mapping, pgoff, &iomap);
}

int ext2_dax_fault(vma, vmf)
{
	...
	ret = dax_fault(vma, vmf, ext2_populate_pfn);
	...
}

I don't have a problem with that.  I'll work up something along those lines next week.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

RE: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Matthew Wilcox]

From: Christoph Hellwig [mailto:hch@infradead.org]
> Either way we need to get rid of buffer_heads, and another aop that is entirely
> caller specific is unaceptable.

I finally figured out what you actually meant by this.  You mean that instead of having an aop->populate_pfn, you want to define a populate_pfn_t callback and pass it in.

Something like this:

int ext2_populate_pfn(struct address_space *mapping, pgoff_t pgoff)
{
	struct iomap iomap;
	...
	return dax_populate_pfn(mapping, pgoff, &iomap);
}

int ext2_dax_fault(vma, vmf)
{
	...
	ret = dax_fault(vma, vmf, ext2_populate_pfn);
	...
}

I don't have a problem with that.  I'll work up something along those lines next week.

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Tue, Aug 23, 2016 at 04:04:12PM -0600, Ross Zwisler wrote:
> When DAX calls ext2_get_block() and the file offset points to a hole we
> currently don't set bh_result->b_size.  When we re-enable PMD faults DAX
> will need bh_result->b_size to tell it the size of the hole so it can
> decide whether to fault in a 4 KiB zero page or a 2 MiB zero page.
> 
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> ---
>  fs/ext2/inode.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
> index d5c7d09..dd55d74 100644
> --- a/fs/ext2/inode.c
> +++ b/fs/ext2/inode.c
> @@ -773,6 +773,9 @@ int ext2_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_
>  	if (ret > 0) {
>  		bh_result->b_size = (ret << inode->i_blkbits);
>  		ret = 0;
> +	} else if (ret == 0) {
> +		/* hole case, need to fill in bh_result->b_size */
> +		bh_result->b_size = 1 << inode->i_blkbits;
>  	}
>  	return ret;
>  
> -- 
> 2.9.0
> 

Jan, is it possible for ext2 to return 2 MiB of contiguous space to us via
ext2_get_block()?

I ask because we have all the infrastructure in place for ext2 to handle PMD
faults (ext2_dax_pmd_fault(), etc.), but I don't think in my testing I've ever
seen this actually happen.

ext2 can obviously return multiple blocks from ext2_get_block(), but can it
actually satisfy a whole PMD's worth (512 contiguous blocks)?  If so, what
steps do I need to take to get this to work in my testing?

If it can't happen, we should probably rip out ext2_dax_pmd_fault() so that we
don't have to keep falling back to PTEs via the PMD path.

Thanks,
- Ross
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Tue, Aug 23, 2016 at 04:04:12PM -0600, Ross Zwisler wrote:
> When DAX calls ext2_get_block() and the file offset points to a hole we
> currently don't set bh_result->b_size.  When we re-enable PMD faults DAX
> will need bh_result->b_size to tell it the size of the hole so it can
> decide whether to fault in a 4 KiB zero page or a 2 MiB zero page.
> 
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> ---
>  fs/ext2/inode.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
> index d5c7d09..dd55d74 100644
> --- a/fs/ext2/inode.c
> +++ b/fs/ext2/inode.c
> @@ -773,6 +773,9 @@ int ext2_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_
>  	if (ret > 0) {
>  		bh_result->b_size = (ret << inode->i_blkbits);
>  		ret = 0;
> +	} else if (ret == 0) {
> +		/* hole case, need to fill in bh_result->b_size */
> +		bh_result->b_size = 1 << inode->i_blkbits;
>  	}
>  	return ret;
>  
> -- 
> 2.9.0
> 

Jan, is it possible for ext2 to return 2 MiB of contiguous space to us via
ext2_get_block()?

I ask because we have all the infrastructure in place for ext2 to handle PMD
faults (ext2_dax_pmd_fault(), etc.), but I don't think in my testing I've ever
seen this actually happen.

ext2 can obviously return multiple blocks from ext2_get_block(), but can it
actually satisfy a whole PMD's worth (512 contiguous blocks)?  If so, what
steps do I need to take to get this to work in my testing?

If it can't happen, we should probably rip out ext2_dax_pmd_fault() so that we
don't have to keep falling back to PTEs via the PMD path.

Thanks,
- Ross

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 2/9] ext2: tell DAX the size of allocation holes

[Ross Zwisler]

On Tue, Aug 23, 2016 at 04:04:12PM -0600, Ross Zwisler wrote:
> When DAX calls ext2_get_block() and the file offset points to a hole we
> currently don't set bh_result->b_size.  When we re-enable PMD faults DAX
> will need bh_result->b_size to tell it the size of the hole so it can
> decide whether to fault in a 4 KiB zero page or a 2 MiB zero page.
> 
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> ---
>  fs/ext2/inode.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
> index d5c7d09..dd55d74 100644
> --- a/fs/ext2/inode.c
> +++ b/fs/ext2/inode.c
> @@ -773,6 +773,9 @@ int ext2_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_
>  	if (ret > 0) {
>  		bh_result->b_size = (ret << inode->i_blkbits);
>  		ret = 0;
> +	} else if (ret == 0) {
> +		/* hole case, need to fill in bh_result->b_size */
> +		bh_result->b_size = 1 << inode->i_blkbits;
>  	}
>  	return ret;
>  
> -- 
> 2.9.0
> 

Jan, is it possible for ext2 to return 2 MiB of contiguous space to us via
ext2_get_block()?

I ask because we have all the infrastructure in place for ext2 to handle PMD
faults (ext2_dax_pmd_fault(), etc.), but I don't think in my testing I've ever
seen this actually happen.

ext2 can obviously return multiple blocks from ext2_get_block(), but can it
actually satisfy a whole PMD's worth (512 contiguous blocks)?  If so, what
steps do I need to take to get this to work in my testing?

If it can't happen, we should probably rip out ext2_dax_pmd_fault() so that we
don't have to keep falling back to PTEs via the PMD path.

Thanks,
- Ross

[PATCH v2 3/9] ext4: tell DAX the size of allocation holes

[Ross Zwisler]

When DAX calls _ext4_get_block() and the file offset points to a hole we
currently don't set bh->b_size.  When we re-enable PMD faults DAX will
need bh->b_size to tell it the size of the hole so it can decide whether to
fault in a 4 KiB zero page or a 2 MiB zero page.

_ext4_get_block() has the hole size information from ext4_map_blocks(), so
populate bh->b_size.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
---
 fs/ext4/inode.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 0900cb4..9075fac 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -759,6 +759,9 @@ static int _ext4_get_block(struct inode *inode, sector_t iblock,
 		ext4_update_bh_state(bh, map.m_flags);
 		bh->b_size = inode->i_sb->s_blocksize * map.m_len;
 		ret = 0;
+	} else if (ret == 0) {
+		/* hole case, need to fill in bh->b_size */
+		bh->b_size = inode->i_sb->s_blocksize * map.m_len;
 	}
 	return ret;
 }
-- 
2.9.0

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

[PATCH v2 3/9] ext4: tell DAX the size of allocation holes

[Ross Zwisler]

When DAX calls _ext4_get_block() and the file offset points to a hole we
currently don't set bh->b_size.  When we re-enable PMD faults DAX will
need bh->b_size to tell it the size of the hole so it can decide whether to
fault in a 4 KiB zero page or a 2 MiB zero page.

_ext4_get_block() has the hole size information from ext4_map_blocks(), so
populate bh->b_size.

Signed-off-by: Ross Zwisler <ross.zwisler-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Reviewed-by: Jan Kara <jack-AlSwsSmVLrQ@public.gmane.org>
---
 fs/ext4/inode.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 0900cb4..9075fac 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -759,6 +759,9 @@ static int _ext4_get_block(struct inode *inode, sector_t iblock,
 		ext4_update_bh_state(bh, map.m_flags);
 		bh->b_size = inode->i_sb->s_blocksize * map.m_len;
 		ret = 0;
+	} else if (ret == 0) {
+		/* hole case, need to fill in bh->b_size */
+		bh->b_size = inode->i_sb->s_blocksize * map.m_len;
 	}
 	return ret;
 }
-- 
2.9.0

[PATCH v2 3/9] ext4: tell DAX the size of allocation holes

[Ross Zwisler]

When DAX calls _ext4_get_block() and the file offset points to a hole we
currently don't set bh->b_size.  When we re-enable PMD faults DAX will
need bh->b_size to tell it the size of the hole so it can decide whether to
fault in a 4 KiB zero page or a 2 MiB zero page.

_ext4_get_block() has the hole size information from ext4_map_blocks(), so
populate bh->b_size.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
---
 fs/ext4/inode.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 0900cb4..9075fac 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -759,6 +759,9 @@ static int _ext4_get_block(struct inode *inode, sector_t iblock,
 		ext4_update_bh_state(bh, map.m_flags);
 		bh->b_size = inode->i_sb->s_blocksize * map.m_len;
 		ret = 0;
+	} else if (ret == 0) {
+		/* hole case, need to fill in bh->b_size */
+		bh->b_size = inode->i_sb->s_blocksize * map.m_len;
 	}
 	return ret;
 }
-- 
2.9.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v2 3/9] ext4: tell DAX the size of allocation holes

[Ross Zwisler]

When DAX calls _ext4_get_block() and the file offset points to a hole we
currently don't set bh->b_size.  When we re-enable PMD faults DAX will
need bh->b_size to tell it the size of the hole so it can decide whether to
fault in a 4 KiB zero page or a 2 MiB zero page.

_ext4_get_block() has the hole size information from ext4_map_blocks(), so
populate bh->b_size.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
---
 fs/ext4/inode.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 0900cb4..9075fac 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -759,6 +759,9 @@ static int _ext4_get_block(struct inode *inode, sector_t iblock,
 		ext4_update_bh_state(bh, map.m_flags);
 		bh->b_size = inode->i_sb->s_blocksize * map.m_len;
 		ret = 0;
+	} else if (ret == 0) {
+		/* hole case, need to fill in bh->b_size */
+		bh->b_size = inode->i_sb->s_blocksize * map.m_len;
 	}
 	return ret;
 }
-- 
2.9.0

[PATCH v2 4/9] dax: remove buffer_size_valid()

[Ross Zwisler]

Now that all our supported filesystems (ext2, ext4 and XFS) all properly
set bh.b_size when we call get_block() for a hole, rely on that value and
remove the buffer_size_valid() sanity check.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
---
 fs/dax.c | 22 +---------------------
 1 file changed, 1 insertion(+), 21 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 993dc6f..8030f93 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -121,19 +121,6 @@ static bool buffer_written(struct buffer_head *bh)
 	return buffer_mapped(bh) && !buffer_unwritten(bh);
 }
 
-/*
- * When ext4 encounters a hole, it returns without modifying the buffer_head
- * which means that we can't trust b_size.  To cope with this, we set b_state
- * to 0 before calling get_block and, if any bit is set, we know we can trust
- * b_size.  Unfortunate, really, since ext4 knows precisely how long a hole is
- * and would save us time calling get_block repeatedly.
- */
-static bool buffer_size_valid(struct buffer_head *bh)
-{
-	return bh->b_state != 0;
-}
-
-
 static sector_t to_sector(const struct buffer_head *bh,
 		const struct inode *inode)
 {
@@ -175,8 +162,6 @@ static ssize_t dax_io(struct inode *inode, struct iov_iter *iter,
 				rc = get_block(inode, block, bh, rw == WRITE);
 				if (rc)
 					break;
-				if (!buffer_size_valid(bh))
-					bh->b_size = 1 << blkbits;
 				bh_max = pos - first + bh->b_size;
 				bdev = bh->b_bdev;
 				/*
@@ -1010,12 +995,7 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 
 	bdev = bh.b_bdev;
 
-	/*
-	 * If the filesystem isn't willing to tell us the length of a hole,
-	 * just fall back to PTEs.  Calling get_block 512 times in a loop
-	 * would be silly.
-	 */
-	if (!buffer_size_valid(&bh) || bh.b_size < PMD_SIZE) {
+	if (bh.b_size < PMD_SIZE) {
 		dax_pmd_dbg(&bh, address, "allocated block too small");
 		return VM_FAULT_FALLBACK;
 	}
-- 
2.9.0

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

[PATCH v2 4/9] dax: remove buffer_size_valid()

[Ross Zwisler]

Now that all our supported filesystems (ext2, ext4 and XFS) all properly
set bh.b_size when we call get_block() for a hole, rely on that value and
remove the buffer_size_valid() sanity check.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
---
 fs/dax.c | 22 +---------------------
 1 file changed, 1 insertion(+), 21 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 993dc6f..8030f93 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -121,19 +121,6 @@ static bool buffer_written(struct buffer_head *bh)
 	return buffer_mapped(bh) && !buffer_unwritten(bh);
 }
 
-/*
- * When ext4 encounters a hole, it returns without modifying the buffer_head
- * which means that we can't trust b_size.  To cope with this, we set b_state
- * to 0 before calling get_block and, if any bit is set, we know we can trust
- * b_size.  Unfortunate, really, since ext4 knows precisely how long a hole is
- * and would save us time calling get_block repeatedly.
- */
-static bool buffer_size_valid(struct buffer_head *bh)
-{
-	return bh->b_state != 0;
-}
-
-
 static sector_t to_sector(const struct buffer_head *bh,
 		const struct inode *inode)
 {
@@ -175,8 +162,6 @@ static ssize_t dax_io(struct inode *inode, struct iov_iter *iter,
 				rc = get_block(inode, block, bh, rw == WRITE);
 				if (rc)
 					break;
-				if (!buffer_size_valid(bh))
-					bh->b_size = 1 << blkbits;
 				bh_max = pos - first + bh->b_size;
 				bdev = bh->b_bdev;
 				/*
@@ -1010,12 +995,7 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 
 	bdev = bh.b_bdev;
 
-	/*
-	 * If the filesystem isn't willing to tell us the length of a hole,
-	 * just fall back to PTEs.  Calling get_block 512 times in a loop
-	 * would be silly.
-	 */
-	if (!buffer_size_valid(&bh) || bh.b_size < PMD_SIZE) {
+	if (bh.b_size < PMD_SIZE) {
 		dax_pmd_dbg(&bh, address, "allocated block too small");
 		return VM_FAULT_FALLBACK;
 	}
-- 
2.9.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v2 4/9] dax: remove buffer_size_valid()

[Ross Zwisler]

Now that all our supported filesystems (ext2, ext4 and XFS) all properly
set bh.b_size when we call get_block() for a hole, rely on that value and
remove the buffer_size_valid() sanity check.

Signed-off-by: Ross Zwisler <ross.zwisler-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Reviewed-by: Jan Kara <jack-AlSwsSmVLrQ@public.gmane.org>
---
 fs/dax.c | 22 +---------------------
 1 file changed, 1 insertion(+), 21 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 993dc6f..8030f93 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -121,19 +121,6 @@ static bool buffer_written(struct buffer_head *bh)
 	return buffer_mapped(bh) && !buffer_unwritten(bh);
 }
 
-/*
- * When ext4 encounters a hole, it returns without modifying the buffer_head
- * which means that we can't trust b_size.  To cope with this, we set b_state
- * to 0 before calling get_block and, if any bit is set, we know we can trust
- * b_size.  Unfortunate, really, since ext4 knows precisely how long a hole is
- * and would save us time calling get_block repeatedly.
- */
-static bool buffer_size_valid(struct buffer_head *bh)
-{
-	return bh->b_state != 0;
-}
-
-
 static sector_t to_sector(const struct buffer_head *bh,
 		const struct inode *inode)
 {
@@ -175,8 +162,6 @@ static ssize_t dax_io(struct inode *inode, struct iov_iter *iter,
 				rc = get_block(inode, block, bh, rw == WRITE);
 				if (rc)
 					break;
-				if (!buffer_size_valid(bh))
-					bh->b_size = 1 << blkbits;
 				bh_max = pos - first + bh->b_size;
 				bdev = bh->b_bdev;
 				/*
@@ -1010,12 +995,7 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 
 	bdev = bh.b_bdev;
 
-	/*
-	 * If the filesystem isn't willing to tell us the length of a hole,
-	 * just fall back to PTEs.  Calling get_block 512 times in a loop
-	 * would be silly.
-	 */
-	if (!buffer_size_valid(&bh) || bh.b_size < PMD_SIZE) {
+	if (bh.b_size < PMD_SIZE) {
 		dax_pmd_dbg(&bh, address, "allocated block too small");
 		return VM_FAULT_FALLBACK;
 	}
-- 
2.9.0

[PATCH v2 4/9] dax: remove buffer_size_valid()

[Ross Zwisler]

Now that all our supported filesystems (ext2, ext4 and XFS) all properly
set bh.b_size when we call get_block() for a hole, rely on that value and
remove the buffer_size_valid() sanity check.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
---
 fs/dax.c | 22 +---------------------
 1 file changed, 1 insertion(+), 21 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 993dc6f..8030f93 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -121,19 +121,6 @@ static bool buffer_written(struct buffer_head *bh)
 	return buffer_mapped(bh) && !buffer_unwritten(bh);
 }
 
-/*
- * When ext4 encounters a hole, it returns without modifying the buffer_head
- * which means that we can't trust b_size.  To cope with this, we set b_state
- * to 0 before calling get_block and, if any bit is set, we know we can trust
- * b_size.  Unfortunate, really, since ext4 knows precisely how long a hole is
- * and would save us time calling get_block repeatedly.
- */
-static bool buffer_size_valid(struct buffer_head *bh)
-{
-	return bh->b_state != 0;
-}
-
-
 static sector_t to_sector(const struct buffer_head *bh,
 		const struct inode *inode)
 {
@@ -175,8 +162,6 @@ static ssize_t dax_io(struct inode *inode, struct iov_iter *iter,
 				rc = get_block(inode, block, bh, rw == WRITE);
 				if (rc)
 					break;
-				if (!buffer_size_valid(bh))
-					bh->b_size = 1 << blkbits;
 				bh_max = pos - first + bh->b_size;
 				bdev = bh->b_bdev;
 				/*
@@ -1010,12 +995,7 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 
 	bdev = bh.b_bdev;
 
-	/*
-	 * If the filesystem isn't willing to tell us the length of a hole,
-	 * just fall back to PTEs.  Calling get_block 512 times in a loop
-	 * would be silly.
-	 */
-	if (!buffer_size_valid(&bh) || bh.b_size < PMD_SIZE) {
+	if (bh.b_size < PMD_SIZE) {
 		dax_pmd_dbg(&bh, address, "allocated block too small");
 		return VM_FAULT_FALLBACK;
 	}
-- 
2.9.0

[PATCH v2 4/9] dax: remove buffer_size_valid()

[Ross Zwisler]

Now that all our supported filesystems (ext2, ext4 and XFS) all properly
set bh.b_size when we call get_block() for a hole, rely on that value and
remove the buffer_size_valid() sanity check.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
---
 fs/dax.c | 22 +---------------------
 1 file changed, 1 insertion(+), 21 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 993dc6f..8030f93 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -121,19 +121,6 @@ static bool buffer_written(struct buffer_head *bh)
 	return buffer_mapped(bh) && !buffer_unwritten(bh);
 }
 
-/*
- * When ext4 encounters a hole, it returns without modifying the buffer_head
- * which means that we can't trust b_size.  To cope with this, we set b_state
- * to 0 before calling get_block and, if any bit is set, we know we can trust
- * b_size.  Unfortunate, really, since ext4 knows precisely how long a hole is
- * and would save us time calling get_block repeatedly.
- */
-static bool buffer_size_valid(struct buffer_head *bh)
-{
-	return bh->b_state != 0;
-}
-
-
 static sector_t to_sector(const struct buffer_head *bh,
 		const struct inode *inode)
 {
@@ -175,8 +162,6 @@ static ssize_t dax_io(struct inode *inode, struct iov_iter *iter,
 				rc = get_block(inode, block, bh, rw == WRITE);
 				if (rc)
 					break;
-				if (!buffer_size_valid(bh))
-					bh->b_size = 1 << blkbits;
 				bh_max = pos - first + bh->b_size;
 				bdev = bh->b_bdev;
 				/*
@@ -1010,12 +995,7 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 
 	bdev = bh.b_bdev;
 
-	/*
-	 * If the filesystem isn't willing to tell us the length of a hole,
-	 * just fall back to PTEs.  Calling get_block 512 times in a loop
-	 * would be silly.
-	 */
-	if (!buffer_size_valid(&bh) || bh.b_size < PMD_SIZE) {
+	if (bh.b_size < PMD_SIZE) {
 		dax_pmd_dbg(&bh, address, "allocated block too small");
 		return VM_FAULT_FALLBACK;
 	}
-- 
2.9.0

[PATCH v2 5/9] dax: make 'wait_table' global variable static

[Ross Zwisler]

The global 'wait_table' variable is only used within fs/dax.c, and
generates the following sparse warning:

fs/dax.c:39:19: warning: symbol 'wait_table' was not declared. Should it be static?

Make it static so it has scope local to fs/dax.c, and to make sparse happy.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/dax.c b/fs/dax.c
index 8030f93..3066a9b 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -50,7 +50,7 @@
 #define DAX_WAIT_TABLE_BITS 12
 #define DAX_WAIT_TABLE_ENTRIES (1 << DAX_WAIT_TABLE_BITS)
 
-wait_queue_head_t wait_table[DAX_WAIT_TABLE_ENTRIES];
+static wait_queue_head_t wait_table[DAX_WAIT_TABLE_ENTRIES];
 
 static int __init init_dax_wait_table(void)
 {
-- 
2.9.0

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

[PATCH v2 5/9] dax: make 'wait_table' global variable static

[Ross Zwisler]

The global 'wait_table' variable is only used within fs/dax.c, and
generates the following sparse warning:

fs/dax.c:39:19: warning: symbol 'wait_table' was not declared. Should it be static?

Make it static so it has scope local to fs/dax.c, and to make sparse happy.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/dax.c b/fs/dax.c
index 8030f93..3066a9b 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -50,7 +50,7 @@
 #define DAX_WAIT_TABLE_BITS 12
 #define DAX_WAIT_TABLE_ENTRIES (1 << DAX_WAIT_TABLE_BITS)
 
-wait_queue_head_t wait_table[DAX_WAIT_TABLE_ENTRIES];
+static wait_queue_head_t wait_table[DAX_WAIT_TABLE_ENTRIES];
 
 static int __init init_dax_wait_table(void)
 {
-- 
2.9.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v2 5/9] dax: make 'wait_table' global variable static

[Ross Zwisler]

The global 'wait_table' variable is only used within fs/dax.c, and
generates the following sparse warning:

fs/dax.c:39:19: warning: symbol 'wait_table' was not declared. Should it be static?

Make it static so it has scope local to fs/dax.c, and to make sparse happy.

Signed-off-by: Ross Zwisler <ross.zwisler-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 fs/dax.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/dax.c b/fs/dax.c
index 8030f93..3066a9b 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -50,7 +50,7 @@
 #define DAX_WAIT_TABLE_BITS 12
 #define DAX_WAIT_TABLE_ENTRIES (1 << DAX_WAIT_TABLE_BITS)
 
-wait_queue_head_t wait_table[DAX_WAIT_TABLE_ENTRIES];
+static wait_queue_head_t wait_table[DAX_WAIT_TABLE_ENTRIES];
 
 static int __init init_dax_wait_table(void)
 {
-- 
2.9.0

[PATCH v2 5/9] dax: make 'wait_table' global variable static

[Ross Zwisler]

The global 'wait_table' variable is only used within fs/dax.c, and
generates the following sparse warning:

fs/dax.c:39:19: warning: symbol 'wait_table' was not declared. Should it be static?

Make it static so it has scope local to fs/dax.c, and to make sparse happy.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/dax.c b/fs/dax.c
index 8030f93..3066a9b 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -50,7 +50,7 @@
 #define DAX_WAIT_TABLE_BITS 12
 #define DAX_WAIT_TABLE_ENTRIES (1 << DAX_WAIT_TABLE_BITS)
 
-wait_queue_head_t wait_table[DAX_WAIT_TABLE_ENTRIES];
+static wait_queue_head_t wait_table[DAX_WAIT_TABLE_ENTRIES];
 
 static int __init init_dax_wait_table(void)
 {
-- 
2.9.0

[PATCH v2 5/9] dax: make 'wait_table' global variable static

[Ross Zwisler]

The global 'wait_table' variable is only used within fs/dax.c, and
generates the following sparse warning:

fs/dax.c:39:19: warning: symbol 'wait_table' was not declared. Should it be static?

Make it static so it has scope local to fs/dax.c, and to make sparse happy.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/dax.c b/fs/dax.c
index 8030f93..3066a9b 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -50,7 +50,7 @@
 #define DAX_WAIT_TABLE_BITS 12
 #define DAX_WAIT_TABLE_ENTRIES (1 << DAX_WAIT_TABLE_BITS)
 
-wait_queue_head_t wait_table[DAX_WAIT_TABLE_ENTRIES];
+static wait_queue_head_t wait_table[DAX_WAIT_TABLE_ENTRIES];
 
 static int __init init_dax_wait_table(void)
 {
-- 
2.9.0

[PATCH v2 6/9] dax: consistent variable naming for DAX entries

[Ross Zwisler]

No functional change.

Consistently use the variable name 'entry' instead of 'ret' for DAX radix
tree entries.  This was already happening in most of the code, so update
get_unlocked_mapping_entry(), grab_mapping_entry() and
dax_unlock_mapping_entry().

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 3066a9b..0e3f462 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -355,7 +355,7 @@ static inline void *unlock_slot(struct address_space *mapping, void **slot)
 static void *get_unlocked_mapping_entry(struct address_space *mapping,
 					pgoff_t index, void ***slotp)
 {
-	void *ret, **slot;
+	void *entry, **slot;
 	struct wait_exceptional_entry_queue ewait;
 	wait_queue_head_t *wq = dax_entry_waitqueue(mapping, index);
 
@@ -365,13 +365,13 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
 	ewait.key.index = index;
 
 	for (;;) {
-		ret = __radix_tree_lookup(&mapping->page_tree, index, NULL,
+		entry = __radix_tree_lookup(&mapping->page_tree, index, NULL,
 					  &slot);
-		if (!ret || !radix_tree_exceptional_entry(ret) ||
+		if (!entry || !radix_tree_exceptional_entry(entry) ||
 		    !slot_locked(mapping, slot)) {
 			if (slotp)
 				*slotp = slot;
-			return ret;
+			return entry;
 		}
 		prepare_to_wait_exclusive(wq, &ewait.wait,
 					  TASK_UNINTERRUPTIBLE);
@@ -394,13 +394,13 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
  */
 static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index)
 {
-	void *ret, **slot;
+	void *entry, **slot;
 
 restart:
 	spin_lock_irq(&mapping->tree_lock);
-	ret = get_unlocked_mapping_entry(mapping, index, &slot);
+	entry = get_unlocked_mapping_entry(mapping, index, &slot);
 	/* No entry for given index? Make sure radix tree is big enough. */
-	if (!ret) {
+	if (!entry) {
 		int err;
 
 		spin_unlock_irq(&mapping->tree_lock);
@@ -408,10 +408,10 @@ restart:
 				mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM);
 		if (err)
 			return ERR_PTR(err);
-		ret = (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
+		entry = (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
 			       RADIX_DAX_ENTRY_LOCK);
 		spin_lock_irq(&mapping->tree_lock);
-		err = radix_tree_insert(&mapping->page_tree, index, ret);
+		err = radix_tree_insert(&mapping->page_tree, index, entry);
 		radix_tree_preload_end();
 		if (err) {
 			spin_unlock_irq(&mapping->tree_lock);
@@ -423,11 +423,11 @@ restart:
 		/* Good, we have inserted empty locked entry into the tree. */
 		mapping->nrexceptional++;
 		spin_unlock_irq(&mapping->tree_lock);
-		return ret;
+		return entry;
 	}
 	/* Normal page in radix tree? */
-	if (!radix_tree_exceptional_entry(ret)) {
-		struct page *page = ret;
+	if (!radix_tree_exceptional_entry(entry)) {
+		struct page *page = entry;
 
 		get_page(page);
 		spin_unlock_irq(&mapping->tree_lock);
@@ -440,9 +440,9 @@ restart:
 		}
 		return page;
 	}
-	ret = lock_slot(mapping, slot);
+	entry = lock_slot(mapping, slot);
 	spin_unlock_irq(&mapping->tree_lock);
-	return ret;
+	return entry;
 }
 
 void dax_wake_mapping_entry_waiter(struct address_space *mapping,
@@ -467,11 +467,11 @@ void dax_wake_mapping_entry_waiter(struct address_space *mapping,
 
 void dax_unlock_mapping_entry(struct address_space *mapping, pgoff_t index)
 {
-	void *ret, **slot;
+	void *entry, **slot;
 
 	spin_lock_irq(&mapping->tree_lock);
-	ret = __radix_tree_lookup(&mapping->page_tree, index, NULL, &slot);
-	if (WARN_ON_ONCE(!ret || !radix_tree_exceptional_entry(ret) ||
+	entry = __radix_tree_lookup(&mapping->page_tree, index, NULL, &slot);
+	if (WARN_ON_ONCE(!entry || !radix_tree_exceptional_entry(entry) ||
 			 !slot_locked(mapping, slot))) {
 		spin_unlock_irq(&mapping->tree_lock);
 		return;
-- 
2.9.0

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

[PATCH v2 6/9] dax: consistent variable naming for DAX entries

[Ross Zwisler]

No functional change.

Consistently use the variable name 'entry' instead of 'ret' for DAX radix
tree entries.  This was already happening in most of the code, so update
get_unlocked_mapping_entry(), grab_mapping_entry() and
dax_unlock_mapping_entry().

Signed-off-by: Ross Zwisler <ross.zwisler-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 fs/dax.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 3066a9b..0e3f462 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -355,7 +355,7 @@ static inline void *unlock_slot(struct address_space *mapping, void **slot)
 static void *get_unlocked_mapping_entry(struct address_space *mapping,
 					pgoff_t index, void ***slotp)
 {
-	void *ret, **slot;
+	void *entry, **slot;
 	struct wait_exceptional_entry_queue ewait;
 	wait_queue_head_t *wq = dax_entry_waitqueue(mapping, index);
 
@@ -365,13 +365,13 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
 	ewait.key.index = index;
 
 	for (;;) {
-		ret = __radix_tree_lookup(&mapping->page_tree, index, NULL,
+		entry = __radix_tree_lookup(&mapping->page_tree, index, NULL,
 					  &slot);
-		if (!ret || !radix_tree_exceptional_entry(ret) ||
+		if (!entry || !radix_tree_exceptional_entry(entry) ||
 		    !slot_locked(mapping, slot)) {
 			if (slotp)
 				*slotp = slot;
-			return ret;
+			return entry;
 		}
 		prepare_to_wait_exclusive(wq, &ewait.wait,
 					  TASK_UNINTERRUPTIBLE);
@@ -394,13 +394,13 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
  */
 static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index)
 {
-	void *ret, **slot;
+	void *entry, **slot;
 
 restart:
 	spin_lock_irq(&mapping->tree_lock);
-	ret = get_unlocked_mapping_entry(mapping, index, &slot);
+	entry = get_unlocked_mapping_entry(mapping, index, &slot);
 	/* No entry for given index? Make sure radix tree is big enough. */
-	if (!ret) {
+	if (!entry) {
 		int err;
 
 		spin_unlock_irq(&mapping->tree_lock);
@@ -408,10 +408,10 @@ restart:
 				mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM);
 		if (err)
 			return ERR_PTR(err);
-		ret = (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
+		entry = (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
 			       RADIX_DAX_ENTRY_LOCK);
 		spin_lock_irq(&mapping->tree_lock);
-		err = radix_tree_insert(&mapping->page_tree, index, ret);
+		err = radix_tree_insert(&mapping->page_tree, index, entry);
 		radix_tree_preload_end();
 		if (err) {
 			spin_unlock_irq(&mapping->tree_lock);
@@ -423,11 +423,11 @@ restart:
 		/* Good, we have inserted empty locked entry into the tree. */
 		mapping->nrexceptional++;
 		spin_unlock_irq(&mapping->tree_lock);
-		return ret;
+		return entry;
 	}
 	/* Normal page in radix tree? */
-	if (!radix_tree_exceptional_entry(ret)) {
-		struct page *page = ret;
+	if (!radix_tree_exceptional_entry(entry)) {
+		struct page *page = entry;
 
 		get_page(page);
 		spin_unlock_irq(&mapping->tree_lock);
@@ -440,9 +440,9 @@ restart:
 		}
 		return page;
 	}
-	ret = lock_slot(mapping, slot);
+	entry = lock_slot(mapping, slot);
 	spin_unlock_irq(&mapping->tree_lock);
-	return ret;
+	return entry;
 }
 
 void dax_wake_mapping_entry_waiter(struct address_space *mapping,
@@ -467,11 +467,11 @@ void dax_wake_mapping_entry_waiter(struct address_space *mapping,
 
 void dax_unlock_mapping_entry(struct address_space *mapping, pgoff_t index)
 {
-	void *ret, **slot;
+	void *entry, **slot;
 
 	spin_lock_irq(&mapping->tree_lock);
-	ret = __radix_tree_lookup(&mapping->page_tree, index, NULL, &slot);
-	if (WARN_ON_ONCE(!ret || !radix_tree_exceptional_entry(ret) ||
+	entry = __radix_tree_lookup(&mapping->page_tree, index, NULL, &slot);
+	if (WARN_ON_ONCE(!entry || !radix_tree_exceptional_entry(entry) ||
 			 !slot_locked(mapping, slot))) {
 		spin_unlock_irq(&mapping->tree_lock);
 		return;
-- 
2.9.0

[PATCH v2 6/9] dax: consistent variable naming for DAX entries

[Ross Zwisler]

No functional change.

Consistently use the variable name 'entry' instead of 'ret' for DAX radix
tree entries.  This was already happening in most of the code, so update
get_unlocked_mapping_entry(), grab_mapping_entry() and
dax_unlock_mapping_entry().

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 3066a9b..0e3f462 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -355,7 +355,7 @@ static inline void *unlock_slot(struct address_space *mapping, void **slot)
 static void *get_unlocked_mapping_entry(struct address_space *mapping,
 					pgoff_t index, void ***slotp)
 {
-	void *ret, **slot;
+	void *entry, **slot;
 	struct wait_exceptional_entry_queue ewait;
 	wait_queue_head_t *wq = dax_entry_waitqueue(mapping, index);
 
@@ -365,13 +365,13 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
 	ewait.key.index = index;
 
 	for (;;) {
-		ret = __radix_tree_lookup(&mapping->page_tree, index, NULL,
+		entry = __radix_tree_lookup(&mapping->page_tree, index, NULL,
 					  &slot);
-		if (!ret || !radix_tree_exceptional_entry(ret) ||
+		if (!entry || !radix_tree_exceptional_entry(entry) ||
 		    !slot_locked(mapping, slot)) {
 			if (slotp)
 				*slotp = slot;
-			return ret;
+			return entry;
 		}
 		prepare_to_wait_exclusive(wq, &ewait.wait,
 					  TASK_UNINTERRUPTIBLE);
@@ -394,13 +394,13 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
  */
 static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index)
 {
-	void *ret, **slot;
+	void *entry, **slot;
 
 restart:
 	spin_lock_irq(&mapping->tree_lock);
-	ret = get_unlocked_mapping_entry(mapping, index, &slot);
+	entry = get_unlocked_mapping_entry(mapping, index, &slot);
 	/* No entry for given index? Make sure radix tree is big enough. */
-	if (!ret) {
+	if (!entry) {
 		int err;
 
 		spin_unlock_irq(&mapping->tree_lock);
@@ -408,10 +408,10 @@ restart:
 				mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM);
 		if (err)
 			return ERR_PTR(err);
-		ret = (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
+		entry = (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
 			       RADIX_DAX_ENTRY_LOCK);
 		spin_lock_irq(&mapping->tree_lock);
-		err = radix_tree_insert(&mapping->page_tree, index, ret);
+		err = radix_tree_insert(&mapping->page_tree, index, entry);
 		radix_tree_preload_end();
 		if (err) {
 			spin_unlock_irq(&mapping->tree_lock);
@@ -423,11 +423,11 @@ restart:
 		/* Good, we have inserted empty locked entry into the tree. */
 		mapping->nrexceptional++;
 		spin_unlock_irq(&mapping->tree_lock);
-		return ret;
+		return entry;
 	}
 	/* Normal page in radix tree? */
-	if (!radix_tree_exceptional_entry(ret)) {
-		struct page *page = ret;
+	if (!radix_tree_exceptional_entry(entry)) {
+		struct page *page = entry;
 
 		get_page(page);
 		spin_unlock_irq(&mapping->tree_lock);
@@ -440,9 +440,9 @@ restart:
 		}
 		return page;
 	}
-	ret = lock_slot(mapping, slot);
+	entry = lock_slot(mapping, slot);
 	spin_unlock_irq(&mapping->tree_lock);
-	return ret;
+	return entry;
 }
 
 void dax_wake_mapping_entry_waiter(struct address_space *mapping,
@@ -467,11 +467,11 @@ void dax_wake_mapping_entry_waiter(struct address_space *mapping,
 
 void dax_unlock_mapping_entry(struct address_space *mapping, pgoff_t index)
 {
-	void *ret, **slot;
+	void *entry, **slot;
 
 	spin_lock_irq(&mapping->tree_lock);
-	ret = __radix_tree_lookup(&mapping->page_tree, index, NULL, &slot);
-	if (WARN_ON_ONCE(!ret || !radix_tree_exceptional_entry(ret) ||
+	entry = __radix_tree_lookup(&mapping->page_tree, index, NULL, &slot);
+	if (WARN_ON_ONCE(!entry || !radix_tree_exceptional_entry(entry) ||
 			 !slot_locked(mapping, slot))) {
 		spin_unlock_irq(&mapping->tree_lock);
 		return;
-- 
2.9.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v2 6/9] dax: consistent variable naming for DAX entries

[Ross Zwisler]

No functional change.

Consistently use the variable name 'entry' instead of 'ret' for DAX radix
tree entries.  This was already happening in most of the code, so update
get_unlocked_mapping_entry(), grab_mapping_entry() and
dax_unlock_mapping_entry().

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 3066a9b..0e3f462 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -355,7 +355,7 @@ static inline void *unlock_slot(struct address_space *mapping, void **slot)
 static void *get_unlocked_mapping_entry(struct address_space *mapping,
 					pgoff_t index, void ***slotp)
 {
-	void *ret, **slot;
+	void *entry, **slot;
 	struct wait_exceptional_entry_queue ewait;
 	wait_queue_head_t *wq = dax_entry_waitqueue(mapping, index);
 
@@ -365,13 +365,13 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
 	ewait.key.index = index;
 
 	for (;;) {
-		ret = __radix_tree_lookup(&mapping->page_tree, index, NULL,
+		entry = __radix_tree_lookup(&mapping->page_tree, index, NULL,
 					  &slot);
-		if (!ret || !radix_tree_exceptional_entry(ret) ||
+		if (!entry || !radix_tree_exceptional_entry(entry) ||
 		    !slot_locked(mapping, slot)) {
 			if (slotp)
 				*slotp = slot;
-			return ret;
+			return entry;
 		}
 		prepare_to_wait_exclusive(wq, &ewait.wait,
 					  TASK_UNINTERRUPTIBLE);
@@ -394,13 +394,13 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
  */
 static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index)
 {
-	void *ret, **slot;
+	void *entry, **slot;
 
 restart:
 	spin_lock_irq(&mapping->tree_lock);
-	ret = get_unlocked_mapping_entry(mapping, index, &slot);
+	entry = get_unlocked_mapping_entry(mapping, index, &slot);
 	/* No entry for given index? Make sure radix tree is big enough. */
-	if (!ret) {
+	if (!entry) {
 		int err;
 
 		spin_unlock_irq(&mapping->tree_lock);
@@ -408,10 +408,10 @@ restart:
 				mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM);
 		if (err)
 			return ERR_PTR(err);
-		ret = (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
+		entry = (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
 			       RADIX_DAX_ENTRY_LOCK);
 		spin_lock_irq(&mapping->tree_lock);
-		err = radix_tree_insert(&mapping->page_tree, index, ret);
+		err = radix_tree_insert(&mapping->page_tree, index, entry);
 		radix_tree_preload_end();
 		if (err) {
 			spin_unlock_irq(&mapping->tree_lock);
@@ -423,11 +423,11 @@ restart:
 		/* Good, we have inserted empty locked entry into the tree. */
 		mapping->nrexceptional++;
 		spin_unlock_irq(&mapping->tree_lock);
-		return ret;
+		return entry;
 	}
 	/* Normal page in radix tree? */
-	if (!radix_tree_exceptional_entry(ret)) {
-		struct page *page = ret;
+	if (!radix_tree_exceptional_entry(entry)) {
+		struct page *page = entry;
 
 		get_page(page);
 		spin_unlock_irq(&mapping->tree_lock);
@@ -440,9 +440,9 @@ restart:
 		}
 		return page;
 	}
-	ret = lock_slot(mapping, slot);
+	entry = lock_slot(mapping, slot);
 	spin_unlock_irq(&mapping->tree_lock);
-	return ret;
+	return entry;
 }
 
 void dax_wake_mapping_entry_waiter(struct address_space *mapping,
@@ -467,11 +467,11 @@ void dax_wake_mapping_entry_waiter(struct address_space *mapping,
 
 void dax_unlock_mapping_entry(struct address_space *mapping, pgoff_t index)
 {
-	void *ret, **slot;
+	void *entry, **slot;
 
 	spin_lock_irq(&mapping->tree_lock);
-	ret = __radix_tree_lookup(&mapping->page_tree, index, NULL, &slot);
-	if (WARN_ON_ONCE(!ret || !radix_tree_exceptional_entry(ret) ||
+	entry = __radix_tree_lookup(&mapping->page_tree, index, NULL, &slot);
+	if (WARN_ON_ONCE(!entry || !radix_tree_exceptional_entry(entry) ||
 			 !slot_locked(mapping, slot))) {
 		spin_unlock_irq(&mapping->tree_lock);
 		return;
-- 
2.9.0

[PATCH v2 7/9] dax: coordinate locking for offsets in PMD range

[Ross Zwisler]

DAX radix tree locking currently locks entries based on the unique
combination of the 'mapping' pointer and the pgoff_t 'index' for the entry.
This works for PTEs, but as we move to PMDs we will need to have all the
offsets within the range covered by the PMD to map to the same bit lock.
To accomplish this, for ranges covered by a PMD entry we will instead lock
based on the page offset of the beginning of the PMD entry.  The 'mapping'
pointer is still used in the same way.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c            | 37 ++++++++++++++++++++++++-------------
 include/linux/dax.h |  2 +-
 mm/filemap.c        |  2 +-
 3 files changed, 26 insertions(+), 15 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 0e3f462..955e184 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -62,10 +62,17 @@ static int __init init_dax_wait_table(void)
 }
 fs_initcall(init_dax_wait_table);
 
+static pgoff_t dax_entry_start(pgoff_t index, void *entry)
+{
+	if (RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD)
+		index &= (PMD_MASK >> PAGE_SHIFT);
+	return index;
+}
+
 static wait_queue_head_t *dax_entry_waitqueue(struct address_space *mapping,
-					      pgoff_t index)
+					      pgoff_t entry_start)
 {
-	unsigned long hash = hash_long((unsigned long)mapping ^ index,
+	unsigned long hash = hash_long((unsigned long)mapping ^ entry_start,
 				       DAX_WAIT_TABLE_BITS);
 	return wait_table + hash;
 }
@@ -283,7 +290,7 @@ EXPORT_SYMBOL_GPL(dax_do_io);
  */
 struct exceptional_entry_key {
 	struct address_space *mapping;
-	unsigned long index;
+	pgoff_t entry_start;
 };
 
 struct wait_exceptional_entry_queue {
@@ -299,7 +306,7 @@ static int wake_exceptional_entry_func(wait_queue_t *wait, unsigned int mode,
 		container_of(wait, struct wait_exceptional_entry_queue, wait);
 
 	if (key->mapping != ewait->key.mapping ||
-	    key->index != ewait->key.index)
+	    key->entry_start != ewait->key.entry_start)
 		return 0;
 	return autoremove_wake_function(wait, mode, sync, NULL);
 }
@@ -357,12 +364,10 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
 {
 	void *entry, **slot;
 	struct wait_exceptional_entry_queue ewait;
-	wait_queue_head_t *wq = dax_entry_waitqueue(mapping, index);
+	wait_queue_head_t *wq;
 
 	init_wait(&ewait.wait);
 	ewait.wait.func = wake_exceptional_entry_func;
-	ewait.key.mapping = mapping;
-	ewait.key.index = index;
 
 	for (;;) {
 		entry = __radix_tree_lookup(&mapping->page_tree, index, NULL,
@@ -373,6 +378,11 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
 				*slotp = slot;
 			return entry;
 		}
+
+		wq = dax_entry_waitqueue(mapping,
+				dax_entry_start(index, entry));
+		ewait.key.mapping = mapping;
+		ewait.key.entry_start = dax_entry_start(index, entry);
 		prepare_to_wait_exclusive(wq, &ewait.wait,
 					  TASK_UNINTERRUPTIBLE);
 		spin_unlock_irq(&mapping->tree_lock);
@@ -445,10 +455,11 @@ restart:
 	return entry;
 }
 
-void dax_wake_mapping_entry_waiter(struct address_space *mapping,
+void dax_wake_mapping_entry_waiter(void *entry, struct address_space *mapping,
 				   pgoff_t index, bool wake_all)
 {
-	wait_queue_head_t *wq = dax_entry_waitqueue(mapping, index);
+	wait_queue_head_t *wq = dax_entry_waitqueue(mapping,
+						dax_entry_start(index, entry));
 
 	/*
 	 * Checking for locked entry and prepare_to_wait_exclusive() happens
@@ -460,7 +471,7 @@ void dax_wake_mapping_entry_waiter(struct address_space *mapping,
 		struct exceptional_entry_key key;
 
 		key.mapping = mapping;
-		key.index = index;
+		key.entry_start = dax_entry_start(index, entry);
 		__wake_up(wq, TASK_NORMAL, wake_all ? 0 : 1, &key);
 	}
 }
@@ -478,7 +489,7 @@ void dax_unlock_mapping_entry(struct address_space *mapping, pgoff_t index)
 	}
 	unlock_slot(mapping, slot);
 	spin_unlock_irq(&mapping->tree_lock);
-	dax_wake_mapping_entry_waiter(mapping, index, false);
+	dax_wake_mapping_entry_waiter(entry, mapping, index, false);
 }
 
 static void put_locked_mapping_entry(struct address_space *mapping,
@@ -503,7 +514,7 @@ static void put_unlocked_mapping_entry(struct address_space *mapping,
 		return;
 
 	/* We have to wake up next waiter for the radix tree entry lock */
-	dax_wake_mapping_entry_waiter(mapping, index, false);
+	dax_wake_mapping_entry_waiter(entry, mapping, index, false);
 }
 
 /*
@@ -530,7 +541,7 @@ int dax_delete_mapping_entry(struct address_space *mapping, pgoff_t index)
 	radix_tree_delete(&mapping->page_tree, index);
 	mapping->nrexceptional--;
 	spin_unlock_irq(&mapping->tree_lock);
-	dax_wake_mapping_entry_waiter(mapping, index, true);
+	dax_wake_mapping_entry_waiter(entry, mapping, index, true);
 
 	return 1;
 }
diff --git a/include/linux/dax.h b/include/linux/dax.h
index 9c6dc77..f6cab31 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -15,7 +15,7 @@ int dax_zero_page_range(struct inode *, loff_t from, unsigned len, get_block_t);
 int dax_truncate_page(struct inode *, loff_t from, get_block_t);
 int dax_fault(struct vm_area_struct *, struct vm_fault *, get_block_t);
 int dax_delete_mapping_entry(struct address_space *mapping, pgoff_t index);
-void dax_wake_mapping_entry_waiter(struct address_space *mapping,
+void dax_wake_mapping_entry_waiter(void *entry, struct address_space *mapping,
 				   pgoff_t index, bool wake_all);
 
 #ifdef CONFIG_FS_DAX
diff --git a/mm/filemap.c b/mm/filemap.c
index 8a287df..35e880d 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -617,7 +617,7 @@ static int page_cache_tree_insert(struct address_space *mapping,
 			if (node)
 				workingset_node_pages_dec(node);
 			/* Wakeup waiters for exceptional entry lock */
-			dax_wake_mapping_entry_waiter(mapping, page->index,
+			dax_wake_mapping_entry_waiter(p, mapping, page->index,
 						      false);
 		}
 	}
-- 
2.9.0

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

[PATCH v2 7/9] dax: coordinate locking for offsets in PMD range

[Ross Zwisler]

DAX radix tree locking currently locks entries based on the unique
combination of the 'mapping' pointer and the pgoff_t 'index' for the entry.
This works for PTEs, but as we move to PMDs we will need to have all the
offsets within the range covered by the PMD to map to the same bit lock.
To accomplish this, for ranges covered by a PMD entry we will instead lock
based on the page offset of the beginning of the PMD entry.  The 'mapping'
pointer is still used in the same way.

Signed-off-by: Ross Zwisler <ross.zwisler-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 fs/dax.c            | 37 ++++++++++++++++++++++++-------------
 include/linux/dax.h |  2 +-
 mm/filemap.c        |  2 +-
 3 files changed, 26 insertions(+), 15 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 0e3f462..955e184 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -62,10 +62,17 @@ static int __init init_dax_wait_table(void)
 }
 fs_initcall(init_dax_wait_table);
 
+static pgoff_t dax_entry_start(pgoff_t index, void *entry)
+{
+	if (RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD)
+		index &= (PMD_MASK >> PAGE_SHIFT);
+	return index;
+}
+
 static wait_queue_head_t *dax_entry_waitqueue(struct address_space *mapping,
-					      pgoff_t index)
+					      pgoff_t entry_start)
 {
-	unsigned long hash = hash_long((unsigned long)mapping ^ index,
+	unsigned long hash = hash_long((unsigned long)mapping ^ entry_start,
 				       DAX_WAIT_TABLE_BITS);
 	return wait_table + hash;
 }
@@ -283,7 +290,7 @@ EXPORT_SYMBOL_GPL(dax_do_io);
  */
 struct exceptional_entry_key {
 	struct address_space *mapping;
-	unsigned long index;
+	pgoff_t entry_start;
 };
 
 struct wait_exceptional_entry_queue {
@@ -299,7 +306,7 @@ static int wake_exceptional_entry_func(wait_queue_t *wait, unsigned int mode,
 		container_of(wait, struct wait_exceptional_entry_queue, wait);
 
 	if (key->mapping != ewait->key.mapping ||
-	    key->index != ewait->key.index)
+	    key->entry_start != ewait->key.entry_start)
 		return 0;
 	return autoremove_wake_function(wait, mode, sync, NULL);
 }
@@ -357,12 +364,10 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
 {
 	void *entry, **slot;
 	struct wait_exceptional_entry_queue ewait;
-	wait_queue_head_t *wq = dax_entry_waitqueue(mapping, index);
+	wait_queue_head_t *wq;
 
 	init_wait(&ewait.wait);
 	ewait.wait.func = wake_exceptional_entry_func;
-	ewait.key.mapping = mapping;
-	ewait.key.index = index;
 
 	for (;;) {
 		entry = __radix_tree_lookup(&mapping->page_tree, index, NULL,
@@ -373,6 +378,11 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
 				*slotp = slot;
 			return entry;
 		}
+
+		wq = dax_entry_waitqueue(mapping,
+				dax_entry_start(index, entry));
+		ewait.key.mapping = mapping;
+		ewait.key.entry_start = dax_entry_start(index, entry);
 		prepare_to_wait_exclusive(wq, &ewait.wait,
 					  TASK_UNINTERRUPTIBLE);
 		spin_unlock_irq(&mapping->tree_lock);
@@ -445,10 +455,11 @@ restart:
 	return entry;
 }
 
-void dax_wake_mapping_entry_waiter(struct address_space *mapping,
+void dax_wake_mapping_entry_waiter(void *entry, struct address_space *mapping,
 				   pgoff_t index, bool wake_all)
 {
-	wait_queue_head_t *wq = dax_entry_waitqueue(mapping, index);
+	wait_queue_head_t *wq = dax_entry_waitqueue(mapping,
+						dax_entry_start(index, entry));
 
 	/*
 	 * Checking for locked entry and prepare_to_wait_exclusive() happens
@@ -460,7 +471,7 @@ void dax_wake_mapping_entry_waiter(struct address_space *mapping,
 		struct exceptional_entry_key key;
 
 		key.mapping = mapping;
-		key.index = index;
+		key.entry_start = dax_entry_start(index, entry);
 		__wake_up(wq, TASK_NORMAL, wake_all ? 0 : 1, &key);
 	}
 }
@@ -478,7 +489,7 @@ void dax_unlock_mapping_entry(struct address_space *mapping, pgoff_t index)
 	}
 	unlock_slot(mapping, slot);
 	spin_unlock_irq(&mapping->tree_lock);
-	dax_wake_mapping_entry_waiter(mapping, index, false);
+	dax_wake_mapping_entry_waiter(entry, mapping, index, false);
 }
 
 static void put_locked_mapping_entry(struct address_space *mapping,
@@ -503,7 +514,7 @@ static void put_unlocked_mapping_entry(struct address_space *mapping,
 		return;
 
 	/* We have to wake up next waiter for the radix tree entry lock */
-	dax_wake_mapping_entry_waiter(mapping, index, false);
+	dax_wake_mapping_entry_waiter(entry, mapping, index, false);
 }
 
 /*
@@ -530,7 +541,7 @@ int dax_delete_mapping_entry(struct address_space *mapping, pgoff_t index)
 	radix_tree_delete(&mapping->page_tree, index);
 	mapping->nrexceptional--;
 	spin_unlock_irq(&mapping->tree_lock);
-	dax_wake_mapping_entry_waiter(mapping, index, true);
+	dax_wake_mapping_entry_waiter(entry, mapping, index, true);
 
 	return 1;
 }
diff --git a/include/linux/dax.h b/include/linux/dax.h
index 9c6dc77..f6cab31 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -15,7 +15,7 @@ int dax_zero_page_range(struct inode *, loff_t from, unsigned len, get_block_t);
 int dax_truncate_page(struct inode *, loff_t from, get_block_t);
 int dax_fault(struct vm_area_struct *, struct vm_fault *, get_block_t);
 int dax_delete_mapping_entry(struct address_space *mapping, pgoff_t index);
-void dax_wake_mapping_entry_waiter(struct address_space *mapping,
+void dax_wake_mapping_entry_waiter(void *entry, struct address_space *mapping,
 				   pgoff_t index, bool wake_all);
 
 #ifdef CONFIG_FS_DAX
diff --git a/mm/filemap.c b/mm/filemap.c
index 8a287df..35e880d 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -617,7 +617,7 @@ static int page_cache_tree_insert(struct address_space *mapping,
 			if (node)
 				workingset_node_pages_dec(node);
 			/* Wakeup waiters for exceptional entry lock */
-			dax_wake_mapping_entry_waiter(mapping, page->index,
+			dax_wake_mapping_entry_waiter(p, mapping, page->index,
 						      false);
 		}
 	}
-- 
2.9.0

[PATCH v2 7/9] dax: coordinate locking for offsets in PMD range

[Ross Zwisler]

DAX radix tree locking currently locks entries based on the unique
combination of the 'mapping' pointer and the pgoff_t 'index' for the entry.
This works for PTEs, but as we move to PMDs we will need to have all the
offsets within the range covered by the PMD to map to the same bit lock.
To accomplish this, for ranges covered by a PMD entry we will instead lock
based on the page offset of the beginning of the PMD entry.  The 'mapping'
pointer is still used in the same way.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c            | 37 ++++++++++++++++++++++++-------------
 include/linux/dax.h |  2 +-
 mm/filemap.c        |  2 +-
 3 files changed, 26 insertions(+), 15 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 0e3f462..955e184 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -62,10 +62,17 @@ static int __init init_dax_wait_table(void)
 }
 fs_initcall(init_dax_wait_table);
 
+static pgoff_t dax_entry_start(pgoff_t index, void *entry)
+{
+	if (RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD)
+		index &= (PMD_MASK >> PAGE_SHIFT);
+	return index;
+}
+
 static wait_queue_head_t *dax_entry_waitqueue(struct address_space *mapping,
-					      pgoff_t index)
+					      pgoff_t entry_start)
 {
-	unsigned long hash = hash_long((unsigned long)mapping ^ index,
+	unsigned long hash = hash_long((unsigned long)mapping ^ entry_start,
 				       DAX_WAIT_TABLE_BITS);
 	return wait_table + hash;
 }
@@ -283,7 +290,7 @@ EXPORT_SYMBOL_GPL(dax_do_io);
  */
 struct exceptional_entry_key {
 	struct address_space *mapping;
-	unsigned long index;
+	pgoff_t entry_start;
 };
 
 struct wait_exceptional_entry_queue {
@@ -299,7 +306,7 @@ static int wake_exceptional_entry_func(wait_queue_t *wait, unsigned int mode,
 		container_of(wait, struct wait_exceptional_entry_queue, wait);
 
 	if (key->mapping != ewait->key.mapping ||
-	    key->index != ewait->key.index)
+	    key->entry_start != ewait->key.entry_start)
 		return 0;
 	return autoremove_wake_function(wait, mode, sync, NULL);
 }
@@ -357,12 +364,10 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
 {
 	void *entry, **slot;
 	struct wait_exceptional_entry_queue ewait;
-	wait_queue_head_t *wq = dax_entry_waitqueue(mapping, index);
+	wait_queue_head_t *wq;
 
 	init_wait(&ewait.wait);
 	ewait.wait.func = wake_exceptional_entry_func;
-	ewait.key.mapping = mapping;
-	ewait.key.index = index;
 
 	for (;;) {
 		entry = __radix_tree_lookup(&mapping->page_tree, index, NULL,
@@ -373,6 +378,11 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
 				*slotp = slot;
 			return entry;
 		}
+
+		wq = dax_entry_waitqueue(mapping,
+				dax_entry_start(index, entry));
+		ewait.key.mapping = mapping;
+		ewait.key.entry_start = dax_entry_start(index, entry);
 		prepare_to_wait_exclusive(wq, &ewait.wait,
 					  TASK_UNINTERRUPTIBLE);
 		spin_unlock_irq(&mapping->tree_lock);
@@ -445,10 +455,11 @@ restart:
 	return entry;
 }
 
-void dax_wake_mapping_entry_waiter(struct address_space *mapping,
+void dax_wake_mapping_entry_waiter(void *entry, struct address_space *mapping,
 				   pgoff_t index, bool wake_all)
 {
-	wait_queue_head_t *wq = dax_entry_waitqueue(mapping, index);
+	wait_queue_head_t *wq = dax_entry_waitqueue(mapping,
+						dax_entry_start(index, entry));
 
 	/*
 	 * Checking for locked entry and prepare_to_wait_exclusive() happens
@@ -460,7 +471,7 @@ void dax_wake_mapping_entry_waiter(struct address_space *mapping,
 		struct exceptional_entry_key key;
 
 		key.mapping = mapping;
-		key.index = index;
+		key.entry_start = dax_entry_start(index, entry);
 		__wake_up(wq, TASK_NORMAL, wake_all ? 0 : 1, &key);
 	}
 }
@@ -478,7 +489,7 @@ void dax_unlock_mapping_entry(struct address_space *mapping, pgoff_t index)
 	}
 	unlock_slot(mapping, slot);
 	spin_unlock_irq(&mapping->tree_lock);
-	dax_wake_mapping_entry_waiter(mapping, index, false);
+	dax_wake_mapping_entry_waiter(entry, mapping, index, false);
 }
 
 static void put_locked_mapping_entry(struct address_space *mapping,
@@ -503,7 +514,7 @@ static void put_unlocked_mapping_entry(struct address_space *mapping,
 		return;
 
 	/* We have to wake up next waiter for the radix tree entry lock */
-	dax_wake_mapping_entry_waiter(mapping, index, false);
+	dax_wake_mapping_entry_waiter(entry, mapping, index, false);
 }
 
 /*
@@ -530,7 +541,7 @@ int dax_delete_mapping_entry(struct address_space *mapping, pgoff_t index)
 	radix_tree_delete(&mapping->page_tree, index);
 	mapping->nrexceptional--;
 	spin_unlock_irq(&mapping->tree_lock);
-	dax_wake_mapping_entry_waiter(mapping, index, true);
+	dax_wake_mapping_entry_waiter(entry, mapping, index, true);
 
 	return 1;
 }
diff --git a/include/linux/dax.h b/include/linux/dax.h
index 9c6dc77..f6cab31 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -15,7 +15,7 @@ int dax_zero_page_range(struct inode *, loff_t from, unsigned len, get_block_t);
 int dax_truncate_page(struct inode *, loff_t from, get_block_t);
 int dax_fault(struct vm_area_struct *, struct vm_fault *, get_block_t);
 int dax_delete_mapping_entry(struct address_space *mapping, pgoff_t index);
-void dax_wake_mapping_entry_waiter(struct address_space *mapping,
+void dax_wake_mapping_entry_waiter(void *entry, struct address_space *mapping,
 				   pgoff_t index, bool wake_all);
 
 #ifdef CONFIG_FS_DAX
diff --git a/mm/filemap.c b/mm/filemap.c
index 8a287df..35e880d 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -617,7 +617,7 @@ static int page_cache_tree_insert(struct address_space *mapping,
 			if (node)
 				workingset_node_pages_dec(node);
 			/* Wakeup waiters for exceptional entry lock */
-			dax_wake_mapping_entry_waiter(mapping, page->index,
+			dax_wake_mapping_entry_waiter(p, mapping, page->index,
 						      false);
 		}
 	}
-- 
2.9.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v2 7/9] dax: coordinate locking for offsets in PMD range

[Ross Zwisler]

DAX radix tree locking currently locks entries based on the unique
combination of the 'mapping' pointer and the pgoff_t 'index' for the entry.
This works for PTEs, but as we move to PMDs we will need to have all the
offsets within the range covered by the PMD to map to the same bit lock.
To accomplish this, for ranges covered by a PMD entry we will instead lock
based on the page offset of the beginning of the PMD entry.  The 'mapping'
pointer is still used in the same way.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c            | 37 ++++++++++++++++++++++++-------------
 include/linux/dax.h |  2 +-
 mm/filemap.c        |  2 +-
 3 files changed, 26 insertions(+), 15 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 0e3f462..955e184 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -62,10 +62,17 @@ static int __init init_dax_wait_table(void)
 }
 fs_initcall(init_dax_wait_table);
 
+static pgoff_t dax_entry_start(pgoff_t index, void *entry)
+{
+	if (RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD)
+		index &= (PMD_MASK >> PAGE_SHIFT);
+	return index;
+}
+
 static wait_queue_head_t *dax_entry_waitqueue(struct address_space *mapping,
-					      pgoff_t index)
+					      pgoff_t entry_start)
 {
-	unsigned long hash = hash_long((unsigned long)mapping ^ index,
+	unsigned long hash = hash_long((unsigned long)mapping ^ entry_start,
 				       DAX_WAIT_TABLE_BITS);
 	return wait_table + hash;
 }
@@ -283,7 +290,7 @@ EXPORT_SYMBOL_GPL(dax_do_io);
  */
 struct exceptional_entry_key {
 	struct address_space *mapping;
-	unsigned long index;
+	pgoff_t entry_start;
 };
 
 struct wait_exceptional_entry_queue {
@@ -299,7 +306,7 @@ static int wake_exceptional_entry_func(wait_queue_t *wait, unsigned int mode,
 		container_of(wait, struct wait_exceptional_entry_queue, wait);
 
 	if (key->mapping != ewait->key.mapping ||
-	    key->index != ewait->key.index)
+	    key->entry_start != ewait->key.entry_start)
 		return 0;
 	return autoremove_wake_function(wait, mode, sync, NULL);
 }
@@ -357,12 +364,10 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
 {
 	void *entry, **slot;
 	struct wait_exceptional_entry_queue ewait;
-	wait_queue_head_t *wq = dax_entry_waitqueue(mapping, index);
+	wait_queue_head_t *wq;
 
 	init_wait(&ewait.wait);
 	ewait.wait.func = wake_exceptional_entry_func;
-	ewait.key.mapping = mapping;
-	ewait.key.index = index;
 
 	for (;;) {
 		entry = __radix_tree_lookup(&mapping->page_tree, index, NULL,
@@ -373,6 +378,11 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
 				*slotp = slot;
 			return entry;
 		}
+
+		wq = dax_entry_waitqueue(mapping,
+				dax_entry_start(index, entry));
+		ewait.key.mapping = mapping;
+		ewait.key.entry_start = dax_entry_start(index, entry);
 		prepare_to_wait_exclusive(wq, &ewait.wait,
 					  TASK_UNINTERRUPTIBLE);
 		spin_unlock_irq(&mapping->tree_lock);
@@ -445,10 +455,11 @@ restart:
 	return entry;
 }
 
-void dax_wake_mapping_entry_waiter(struct address_space *mapping,
+void dax_wake_mapping_entry_waiter(void *entry, struct address_space *mapping,
 				   pgoff_t index, bool wake_all)
 {
-	wait_queue_head_t *wq = dax_entry_waitqueue(mapping, index);
+	wait_queue_head_t *wq = dax_entry_waitqueue(mapping,
+						dax_entry_start(index, entry));
 
 	/*
 	 * Checking for locked entry and prepare_to_wait_exclusive() happens
@@ -460,7 +471,7 @@ void dax_wake_mapping_entry_waiter(struct address_space *mapping,
 		struct exceptional_entry_key key;
 
 		key.mapping = mapping;
-		key.index = index;
+		key.entry_start = dax_entry_start(index, entry);
 		__wake_up(wq, TASK_NORMAL, wake_all ? 0 : 1, &key);
 	}
 }
@@ -478,7 +489,7 @@ void dax_unlock_mapping_entry(struct address_space *mapping, pgoff_t index)
 	}
 	unlock_slot(mapping, slot);
 	spin_unlock_irq(&mapping->tree_lock);
-	dax_wake_mapping_entry_waiter(mapping, index, false);
+	dax_wake_mapping_entry_waiter(entry, mapping, index, false);
 }
 
 static void put_locked_mapping_entry(struct address_space *mapping,
@@ -503,7 +514,7 @@ static void put_unlocked_mapping_entry(struct address_space *mapping,
 		return;
 
 	/* We have to wake up next waiter for the radix tree entry lock */
-	dax_wake_mapping_entry_waiter(mapping, index, false);
+	dax_wake_mapping_entry_waiter(entry, mapping, index, false);
 }
 
 /*
@@ -530,7 +541,7 @@ int dax_delete_mapping_entry(struct address_space *mapping, pgoff_t index)
 	radix_tree_delete(&mapping->page_tree, index);
 	mapping->nrexceptional--;
 	spin_unlock_irq(&mapping->tree_lock);
-	dax_wake_mapping_entry_waiter(mapping, index, true);
+	dax_wake_mapping_entry_waiter(entry, mapping, index, true);
 
 	return 1;
 }
diff --git a/include/linux/dax.h b/include/linux/dax.h
index 9c6dc77..f6cab31 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -15,7 +15,7 @@ int dax_zero_page_range(struct inode *, loff_t from, unsigned len, get_block_t);
 int dax_truncate_page(struct inode *, loff_t from, get_block_t);
 int dax_fault(struct vm_area_struct *, struct vm_fault *, get_block_t);
 int dax_delete_mapping_entry(struct address_space *mapping, pgoff_t index);
-void dax_wake_mapping_entry_waiter(struct address_space *mapping,
+void dax_wake_mapping_entry_waiter(void *entry, struct address_space *mapping,
 				   pgoff_t index, bool wake_all);
 
 #ifdef CONFIG_FS_DAX
diff --git a/mm/filemap.c b/mm/filemap.c
index 8a287df..35e880d 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -617,7 +617,7 @@ static int page_cache_tree_insert(struct address_space *mapping,
 			if (node)
 				workingset_node_pages_dec(node);
 			/* Wakeup waiters for exceptional entry lock */
-			dax_wake_mapping_entry_waiter(mapping, page->index,
+			dax_wake_mapping_entry_waiter(p, mapping, page->index,
 						      false);
 		}
 	}
-- 
2.9.0

[PATCH v2 8/9] dax: re-enable DAX PMD support

[Ross Zwisler]

DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
locking.  This patch allows DAX PMDs to participate in the DAX radix tree
based locking scheme so that they can be re-enabled.

There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX
mappings that have an associated block allocation, and 4k DAX empty
entries.  The empty entries exist to provide locking for the duration of a
given page fault.

This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP)
entries, PMD DAX entries that have associated block allocations, and 2 MiB
DAX empty entries.

Unlike the 4k case where we insert a struct page* into the radix tree for
4k zero pages, for HZP we insert a DAX exceptional entry with the new
RADIX_DAX_HZP flag set.  This is because we use a single 2 MiB zero page in
every 2MiB hole mapping, and it doesn't make sense to have that same struct
page* with multiple entries in multiple trees.  This would cause contention
on the single page lock for the one Huge Zero Page, and it would break the
page->index and page->mapping associations that are assumed to be valid in
many other places in the kernel.

One difficult use case is when one thread is trying to use 4k entries in
radix tree for a given offset, and another thread is using 2 MiB entries
for that same offset.  The current code handles this by making the 2 MiB
user fall back to 4k entries for most cases.  This was done because it is
the simplest solution, and because the use of 2MiB pages is already
opportunistic.

If we were to try to upgrade from 4k pages to 2MiB pages for a given range,
we run into the problem of how we lock out 4k page faults for the entire
2MiB range while we clean out the radix tree so we can insert the 2MiB
entry.  We can solve this problem if we need to, but I think that the cases
where both 2MiB entries and 4K entries are being used for the same range
will be rare enough and the gain small enough that it probably won't be
worth the complexity.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c            | 208 +++++++++++++++++++++++++++++++---------------------
 include/linux/dax.h |  27 ++++++-
 mm/filemap.c        |   4 +-
 3 files changed, 151 insertions(+), 88 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 955e184..d11c996 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -32,20 +32,6 @@
 #include <linux/pfn_t.h>
 #include <linux/sizes.h>
 
-/*
- * We use lowest available bit in exceptional entry for locking, other two
- * bits to determine entry type. In total 3 special bits.
- */
-#define RADIX_DAX_SHIFT	(RADIX_TREE_EXCEPTIONAL_SHIFT + 3)
-#define RADIX_DAX_PTE (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 1))
-#define RADIX_DAX_PMD (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 2))
-#define RADIX_DAX_TYPE_MASK (RADIX_DAX_PTE | RADIX_DAX_PMD)
-#define RADIX_DAX_TYPE(entry) ((unsigned long)entry & RADIX_DAX_TYPE_MASK)
-#define RADIX_DAX_SECTOR(entry) (((unsigned long)entry >> RADIX_DAX_SHIFT))
-#define RADIX_DAX_ENTRY(sector, pmd) ((void *)((unsigned long)sector << \
-		RADIX_DAX_SHIFT | (pmd ? RADIX_DAX_PMD : RADIX_DAX_PTE) | \
-		RADIX_TREE_EXCEPTIONAL_ENTRY))
-
 /* We choose 4096 entries - same as per-zone page wait tables */
 #define DAX_WAIT_TABLE_BITS 12
 #define DAX_WAIT_TABLE_ENTRIES (1 << DAX_WAIT_TABLE_BITS)
@@ -402,15 +388,32 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
  * persistent memory the benefit is doubtful. We can add that later if we can
  * show it helps.
  */
-static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index)
+static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index,
+		unsigned long new_type)
 {
+	bool pmd_downgrade = false;
 	void *entry, **slot;
 
 restart:
 	spin_lock_irq(&mapping->tree_lock);
 	entry = get_unlocked_mapping_entry(mapping, index, &slot);
+
+	if (entry && new_type == RADIX_DAX_PMD) {
+		if (!radix_tree_exceptional_entry(entry) ||
+				RADIX_DAX_TYPE(entry) == RADIX_DAX_PTE) {
+			spin_unlock_irq(&mapping->tree_lock);
+			return ERR_PTR(-EEXIST);
+		}
+	} else if (entry && new_type == RADIX_DAX_PTE) {
+		if (radix_tree_exceptional_entry(entry) &&
+		    RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD &&
+		    (unsigned long)entry & (RADIX_DAX_HZP|RADIX_DAX_EMPTY)) {
+			pmd_downgrade = true;
+		}
+	}
+
 	/* No entry for given index? Make sure radix tree is big enough. */
-	if (!entry) {
+	if (!entry || pmd_downgrade) {
 		int err;
 
 		spin_unlock_irq(&mapping->tree_lock);
@@ -418,15 +421,29 @@ restart:
 				mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM);
 		if (err)
 			return ERR_PTR(err);
-		entry = (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
-			       RADIX_DAX_ENTRY_LOCK);
+
+		if (pmd_downgrade && ((unsigned long)entry & RADIX_DAX_HZP))
+			unmap_mapping_range(mapping,
+				(index << PAGE_SHIFT) & PMD_MASK, PMD_SIZE, 0);
+
 		spin_lock_irq(&mapping->tree_lock);
-		err = radix_tree_insert(&mapping->page_tree, index, entry);
+
+		if (pmd_downgrade) {
+			radix_tree_delete(&mapping->page_tree, index);
+			mapping->nrexceptional--;
+			dax_wake_mapping_entry_waiter(entry, mapping, index,
+					false);
+		}
+
+		entry = RADIX_DAX_EMPTY_ENTRY(new_type);
+
+		err = __radix_tree_insert(&mapping->page_tree, index,
+				RADIX_DAX_ORDER(new_type), entry);
 		radix_tree_preload_end();
 		if (err) {
 			spin_unlock_irq(&mapping->tree_lock);
 			/* Someone already created the entry? */
-			if (err == -EEXIST)
+			if (err == -EEXIST && new_type == RADIX_DAX_PTE)
 				goto restart;
 			return ERR_PTR(err);
 		}
@@ -595,15 +612,15 @@ static int copy_user_bh(struct page *to, struct inode *inode,
 	return 0;
 }
 
-#define DAX_PMD_INDEX(page_index) (page_index & (PMD_MASK >> PAGE_SHIFT))
-
 static void *dax_insert_mapping_entry(struct address_space *mapping,
 				      struct vm_fault *vmf,
-				      void *entry, sector_t sector)
+				      void *entry, sector_t sector,
+				      unsigned long new_type, bool hzp)
 {
 	struct radix_tree_root *page_tree = &mapping->page_tree;
 	int error = 0;
 	bool hole_fill = false;
+	bool hzp_fill = false;
 	void *new_entry;
 	pgoff_t index = vmf->pgoff;
 
@@ -622,22 +639,30 @@ static void *dax_insert_mapping_entry(struct address_space *mapping,
 		error = radix_tree_preload(vmf->gfp_mask & ~__GFP_HIGHMEM);
 		if (error)
 			return ERR_PTR(error);
+	} else if ((unsigned long)entry & RADIX_DAX_HZP && !hzp) {
+		hzp_fill = true;
+		unmap_mapping_range(mapping,
+			(vmf->pgoff << PAGE_SHIFT) & PMD_MASK, PMD_SIZE, 0);
 	}
 
 	spin_lock_irq(&mapping->tree_lock);
-	new_entry = (void *)((unsigned long)RADIX_DAX_ENTRY(sector, false) |
-		       RADIX_DAX_ENTRY_LOCK);
+	if (hzp)
+		new_entry = RADIX_DAX_HZP_ENTRY();
+	else
+		new_entry = RADIX_DAX_ENTRY(sector, new_type);
+
 	if (hole_fill) {
 		__delete_from_page_cache(entry, NULL);
 		/* Drop pagecache reference */
 		put_page(entry);
-		error = radix_tree_insert(page_tree, index, new_entry);
+		error = __radix_tree_insert(page_tree, index,
+				RADIX_DAX_ORDER(new_type), new_entry);
 		if (error) {
 			new_entry = ERR_PTR(error);
 			goto unlock;
 		}
 		mapping->nrexceptional++;
-	} else {
+	} else if ((unsigned long)entry & (RADIX_DAX_HZP|RADIX_DAX_EMPTY)) {
 		void **slot;
 		void *ret;
 
@@ -693,6 +718,18 @@ static int dax_writeback_one(struct block_device *bdev,
 		goto unlock;
 	}
 
+	if (WARN_ON_ONCE((unsigned long)entry & RADIX_DAX_EMPTY)) {
+		ret = -EIO;
+		goto unlock;
+	}
+
+	/*
+	 * Even if dax_writeback_mapping_range() was given a wbc->range_start
+	 * in the middle of a PMD, the 'index' we are given will be aligned to
+	 * the start index of the PMD, as will the sector we pull from
+	 * 'entry'.  This allows us to flush for PMD_SIZE and not have to
+	 * worry about partial PMD writebacks.
+	 */
 	dax.sector = RADIX_DAX_SECTOR(entry);
 	dax.size = (type == RADIX_DAX_PMD ? PMD_SIZE : PAGE_SIZE);
 	spin_unlock_irq(&mapping->tree_lock);
@@ -733,12 +770,11 @@ int dax_writeback_mapping_range(struct address_space *mapping,
 		struct block_device *bdev, struct writeback_control *wbc)
 {
 	struct inode *inode = mapping->host;
-	pgoff_t start_index, end_index, pmd_index;
+	pgoff_t start_index, end_index;
 	pgoff_t indices[PAGEVEC_SIZE];
 	struct pagevec pvec;
 	bool done = false;
 	int i, ret = 0;
-	void *entry;
 
 	if (WARN_ON_ONCE(inode->i_blkbits != PAGE_SHIFT))
 		return -EIO;
@@ -748,15 +784,6 @@ int dax_writeback_mapping_range(struct address_space *mapping,
 
 	start_index = wbc->range_start >> PAGE_SHIFT;
 	end_index = wbc->range_end >> PAGE_SHIFT;
-	pmd_index = DAX_PMD_INDEX(start_index);
-
-	rcu_read_lock();
-	entry = radix_tree_lookup(&mapping->page_tree, pmd_index);
-	rcu_read_unlock();
-
-	/* see if the start of our range is covered by a PMD entry */
-	if (entry && RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD)
-		start_index = pmd_index;
 
 	tag_pages_for_writeback(mapping, start_index, end_index);
 
@@ -802,7 +829,8 @@ static int dax_insert_mapping(struct address_space *mapping,
 		return PTR_ERR(dax.addr);
 	dax_unmap_atomic(bdev, &dax);
 
-	ret = dax_insert_mapping_entry(mapping, vmf, entry, dax.sector);
+	ret = dax_insert_mapping_entry(mapping, vmf, entry, dax.sector,
+			RADIX_DAX_PTE, false);
 	if (IS_ERR(ret))
 		return PTR_ERR(ret);
 	*entryp = ret;
@@ -849,7 +877,7 @@ int dax_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
 	bh.b_bdev = inode->i_sb->s_bdev;
 	bh.b_size = PAGE_SIZE;
 
-	entry = grab_mapping_entry(mapping, vmf->pgoff);
+	entry = grab_mapping_entry(mapping, vmf->pgoff, RADIX_DAX_PTE);
 	if (IS_ERR(entry)) {
 		error = PTR_ERR(entry);
 		goto out;
@@ -953,9 +981,11 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 	bool write = flags & FAULT_FLAG_WRITE;
 	struct block_device *bdev;
 	pgoff_t size, pgoff;
+	struct vm_fault vmf;
 	sector_t block;
 	int result = 0;
-	bool alloc = false;
+	void *entry, *ret;
+
 
 	/* dax pmd mappings require pfn_t_devmap() */
 	if (!IS_ENABLED(CONFIG_FS_DAX_PMD))
@@ -977,6 +1007,11 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 		return VM_FAULT_FALLBACK;
 	}
 
+	/*
+	 * Check whether offset isn't beyond end of file now. Caller is supposed
+	 * to hold locks serializing us with truncate / punch hole so this is
+	 * a reliable test.
+	 */
 	pgoff = linear_page_index(vma, pmd_addr);
 	size = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	if (pgoff >= size)
@@ -994,37 +1029,45 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 
 	bh.b_size = PMD_SIZE;
 
-	if (get_block(inode, block, &bh, 0) != 0)
-		return VM_FAULT_SIGBUS;
+	/*
+	 * grab_mapping_entry() will make sure we get a 2M empty entry, a DAX
+	 * PMD or a HZP entry.  If it can't (because a 4k page is already in
+	 * the tree, for instance), it will return -EEXIST and we just fall
+	 * back to 4k entries.
+	 */
+	entry = grab_mapping_entry(mapping, pgoff, RADIX_DAX_PMD);
+	if (IS_ERR(entry))
+		return VM_FAULT_FALLBACK;
+
+	if (get_block(inode, block, &bh, 0) != 0) {
+		result = VM_FAULT_SIGBUS;
+		goto unlock_entry;
+	}
 
 	if (!buffer_mapped(&bh) && write) {
-		if (get_block(inode, block, &bh, 1) != 0)
-			return VM_FAULT_SIGBUS;
-		alloc = true;
-		WARN_ON_ONCE(buffer_unwritten(&bh) || buffer_new(&bh));
+		if (get_block(inode, block, &bh, 1) != 0) {
+			result = VM_FAULT_SIGBUS;
+			goto unlock_entry;
+		}
 	}
 
+	/* Filesystem should not return unwritten buffers to us! */
+	WARN_ON_ONCE(buffer_unwritten(&bh) || buffer_new(&bh));
+
 	bdev = bh.b_bdev;
 
 	if (bh.b_size < PMD_SIZE) {
 		dax_pmd_dbg(&bh, address, "allocated block too small");
-		return VM_FAULT_FALLBACK;
+		goto fallback;
 	}
 
-	/*
-	 * If we allocated new storage, make sure no process has any
-	 * zero pages covering this hole
-	 */
-	if (alloc) {
-		loff_t lstart = pgoff << PAGE_SHIFT;
-		loff_t lend = lstart + PMD_SIZE - 1; /* inclusive */
-
-		truncate_pagecache_range(inode, lstart, lend);
-	}
+	vmf.pgoff = pgoff;
+	vmf.flags = flags;
+	vmf.gfp_mask = mapping_gfp_mask(mapping) | __GFP_FS | __GFP_IO;
 
 	if (!write && !buffer_mapped(&bh)) {
 		spinlock_t *ptl;
-		pmd_t entry;
+		pmd_t pmd_entry;
 		struct page *zero_page = get_huge_zero_page();
 
 		if (unlikely(!zero_page)) {
@@ -1032,6 +1075,15 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 			goto fallback;
 		}
 
+		ret = dax_insert_mapping_entry(mapping, &vmf, entry,
+				0, RADIX_DAX_PMD, true);
+		if (IS_ERR(ret)) {
+			dax_pmd_dbg(&bh, address,
+					"PMD radix insertion failed");
+			goto fallback;
+		}
+		entry = ret;
+
 		ptl = pmd_lock(vma->vm_mm, pmd);
 		if (!pmd_none(*pmd)) {
 			spin_unlock(ptl);
@@ -1044,9 +1096,9 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 				__func__, current->comm, address,
 				(unsigned long long) to_sector(&bh, inode));
 
-		entry = mk_pmd(zero_page, vma->vm_page_prot);
-		entry = pmd_mkhuge(entry);
-		set_pmd_at(vma->vm_mm, pmd_addr, pmd, entry);
+		pmd_entry = mk_pmd(zero_page, vma->vm_page_prot);
+		pmd_entry = pmd_mkhuge(pmd_entry);
+		set_pmd_at(vma->vm_mm, pmd_addr, pmd, pmd_entry);
 		result = VM_FAULT_NOPAGE;
 		spin_unlock(ptl);
 	} else {
@@ -1078,27 +1130,14 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 		}
 		dax_unmap_atomic(bdev, &dax);
 
-		/*
-		 * For PTE faults we insert a radix tree entry for reads, and
-		 * leave it clean.  Then on the first write we dirty the radix
-		 * tree entry via the dax_pfn_mkwrite() path.  This sequence
-		 * allows the dax_pfn_mkwrite() call to be simpler and avoid a
-		 * call into get_block() to translate the pgoff to a sector in
-		 * order to be able to create a new radix tree entry.
-		 *
-		 * The PMD path doesn't have an equivalent to
-		 * dax_pfn_mkwrite(), though, so for a read followed by a
-		 * write we traverse all the way through dax_pmd_fault()
-		 * twice.  This means we can just skip inserting a radix tree
-		 * entry completely on the initial read and just wait until
-		 * the write to insert a dirty entry.
-		 */
-		if (write) {
-			/*
-			 * We should insert radix-tree entry and dirty it here.
-			 * For now this is broken...
-			 */
+		ret = dax_insert_mapping_entry(mapping, &vmf, entry,
+				dax.sector, RADIX_DAX_PMD, false);
+		if (IS_ERR(ret)) {
+			dax_pmd_dbg(&bh, address,
+					"PMD radix insertion failed");
+			goto fallback;
 		}
+		entry = ret;
 
 		dev_dbg(part_to_dev(bdev->bd_part),
 				"%s: %s addr: %lx pfn: %lx sect: %llx\n",
@@ -1109,13 +1148,14 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 				dax.pfn, write);
 	}
 
- out:
+ unlock_entry:
+	put_locked_mapping_entry(mapping, pgoff, entry);
 	return result;
 
  fallback:
 	count_vm_event(THP_FAULT_FALLBACK);
 	result = VM_FAULT_FALLBACK;
-	goto out;
+	goto unlock_entry;
 }
 EXPORT_SYMBOL_GPL(dax_pmd_fault);
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git a/include/linux/dax.h b/include/linux/dax.h
index f6cab31..bdf6064 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -6,8 +6,33 @@
 #include <linux/radix-tree.h>
 #include <asm/pgtable.h>
 
-/* We use lowest available exceptional entry bit for locking */
+/*
+ * We use lowest available bit in exceptional entry for locking, two bits for
+ * the entry type (PMD & PTE), and two more for flags (HZP and empty).  In
+ * total five special bits.
+ */
+#define RADIX_DAX_SHIFT	(RADIX_TREE_EXCEPTIONAL_SHIFT + 5)
 #define RADIX_DAX_ENTRY_LOCK (1 << RADIX_TREE_EXCEPTIONAL_SHIFT)
+/* PTE and PMD types */
+#define RADIX_DAX_PTE (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 1))
+#define RADIX_DAX_PMD (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 2))
+/* huge zero page and empty entry flags */
+#define RADIX_DAX_HZP (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 3))
+#define RADIX_DAX_EMPTY (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 4))
+
+#define RADIX_DAX_TYPE_MASK (RADIX_DAX_PTE | RADIX_DAX_PMD)
+#define RADIX_DAX_TYPE(entry) ((unsigned long)entry & RADIX_DAX_TYPE_MASK)
+#define RADIX_DAX_SECTOR(entry) (((unsigned long)entry >> RADIX_DAX_SHIFT))
+
+/* entries begin locked */
+#define RADIX_DAX_ENTRY(sector, type) ((void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |\
+	type | (unsigned long)sector << RADIX_DAX_SHIFT | RADIX_DAX_ENTRY_LOCK))
+#define RADIX_DAX_HZP_ENTRY() ((void *)(RADIX_TREE_EXCEPTIONAL_ENTRY | \
+	RADIX_DAX_PMD | RADIX_DAX_HZP | RADIX_DAX_EMPTY | RADIX_DAX_ENTRY_LOCK))
+#define RADIX_DAX_EMPTY_ENTRY(type) ((void *)(RADIX_TREE_EXCEPTIONAL_ENTRY | \
+		type | RADIX_DAX_EMPTY | RADIX_DAX_ENTRY_LOCK))
+
+#define RADIX_DAX_ORDER(type) (type == RADIX_DAX_PMD ? PMD_SHIFT-PAGE_SHIFT : 0)
 
 ssize_t dax_do_io(struct kiocb *, struct inode *, struct iov_iter *,
 		  get_block_t, dio_iodone_t, int flags);
diff --git a/mm/filemap.c b/mm/filemap.c
index 35e880d..d9dd97e 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -610,9 +610,7 @@ static int page_cache_tree_insert(struct address_space *mapping,
 				workingset_node_shadows_dec(node);
 		} else {
 			/* DAX can replace empty locked entry with a hole */
-			WARN_ON_ONCE(p !=
-				(void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
-					 RADIX_DAX_ENTRY_LOCK));
+			WARN_ON_ONCE(p != RADIX_DAX_EMPTY_ENTRY(RADIX_DAX_PTE));
 			/* DAX accounts exceptional entries as normal pages */
 			if (node)
 				workingset_node_pages_dec(node);
-- 
2.9.0

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

[PATCH v2 8/9] dax: re-enable DAX PMD support

[Ross Zwisler]

DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
locking.  This patch allows DAX PMDs to participate in the DAX radix tree
based locking scheme so that they can be re-enabled.

There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX
mappings that have an associated block allocation, and 4k DAX empty
entries.  The empty entries exist to provide locking for the duration of a
given page fault.

This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP)
entries, PMD DAX entries that have associated block allocations, and 2 MiB
DAX empty entries.

Unlike the 4k case where we insert a struct page* into the radix tree for
4k zero pages, for HZP we insert a DAX exceptional entry with the new
RADIX_DAX_HZP flag set.  This is because we use a single 2 MiB zero page in
every 2MiB hole mapping, and it doesn't make sense to have that same struct
page* with multiple entries in multiple trees.  This would cause contention
on the single page lock for the one Huge Zero Page, and it would break the
page->index and page->mapping associations that are assumed to be valid in
many other places in the kernel.

One difficult use case is when one thread is trying to use 4k entries in
radix tree for a given offset, and another thread is using 2 MiB entries
for that same offset.  The current code handles this by making the 2 MiB
user fall back to 4k entries for most cases.  This was done because it is
the simplest solution, and because the use of 2MiB pages is already
opportunistic.

If we were to try to upgrade from 4k pages to 2MiB pages for a given range,
we run into the problem of how we lock out 4k page faults for the entire
2MiB range while we clean out the radix tree so we can insert the 2MiB
entry.  We can solve this problem if we need to, but I think that the cases
where both 2MiB entries and 4K entries are being used for the same range
will be rare enough and the gain small enough that it probably won't be
worth the complexity.

Signed-off-by: Ross Zwisler <ross.zwisler-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 fs/dax.c            | 208 +++++++++++++++++++++++++++++++---------------------
 include/linux/dax.h |  27 ++++++-
 mm/filemap.c        |   4 +-
 3 files changed, 151 insertions(+), 88 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 955e184..d11c996 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -32,20 +32,6 @@
 #include <linux/pfn_t.h>
 #include <linux/sizes.h>
 
-/*
- * We use lowest available bit in exceptional entry for locking, other two
- * bits to determine entry type. In total 3 special bits.
- */
-#define RADIX_DAX_SHIFT	(RADIX_TREE_EXCEPTIONAL_SHIFT + 3)
-#define RADIX_DAX_PTE (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 1))
-#define RADIX_DAX_PMD (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 2))
-#define RADIX_DAX_TYPE_MASK (RADIX_DAX_PTE | RADIX_DAX_PMD)
-#define RADIX_DAX_TYPE(entry) ((unsigned long)entry & RADIX_DAX_TYPE_MASK)
-#define RADIX_DAX_SECTOR(entry) (((unsigned long)entry >> RADIX_DAX_SHIFT))
-#define RADIX_DAX_ENTRY(sector, pmd) ((void *)((unsigned long)sector << \
-		RADIX_DAX_SHIFT | (pmd ? RADIX_DAX_PMD : RADIX_DAX_PTE) | \
-		RADIX_TREE_EXCEPTIONAL_ENTRY))
-
 /* We choose 4096 entries - same as per-zone page wait tables */
 #define DAX_WAIT_TABLE_BITS 12
 #define DAX_WAIT_TABLE_ENTRIES (1 << DAX_WAIT_TABLE_BITS)
@@ -402,15 +388,32 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
  * persistent memory the benefit is doubtful. We can add that later if we can
  * show it helps.
  */
-static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index)
+static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index,
+		unsigned long new_type)
 {
+	bool pmd_downgrade = false;
 	void *entry, **slot;
 
 restart:
 	spin_lock_irq(&mapping->tree_lock);
 	entry = get_unlocked_mapping_entry(mapping, index, &slot);
+
+	if (entry && new_type == RADIX_DAX_PMD) {
+		if (!radix_tree_exceptional_entry(entry) ||
+				RADIX_DAX_TYPE(entry) == RADIX_DAX_PTE) {
+			spin_unlock_irq(&mapping->tree_lock);
+			return ERR_PTR(-EEXIST);
+		}
+	} else if (entry && new_type == RADIX_DAX_PTE) {
+		if (radix_tree_exceptional_entry(entry) &&
+		    RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD &&
+		    (unsigned long)entry & (RADIX_DAX_HZP|RADIX_DAX_EMPTY)) {
+			pmd_downgrade = true;
+		}
+	}
+
 	/* No entry for given index? Make sure radix tree is big enough. */
-	if (!entry) {
+	if (!entry || pmd_downgrade) {
 		int err;
 
 		spin_unlock_irq(&mapping->tree_lock);
@@ -418,15 +421,29 @@ restart:
 				mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM);
 		if (err)
 			return ERR_PTR(err);
-		entry = (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
-			       RADIX_DAX_ENTRY_LOCK);
+
+		if (pmd_downgrade && ((unsigned long)entry & RADIX_DAX_HZP))
+			unmap_mapping_range(mapping,
+				(index << PAGE_SHIFT) & PMD_MASK, PMD_SIZE, 0);
+
 		spin_lock_irq(&mapping->tree_lock);
-		err = radix_tree_insert(&mapping->page_tree, index, entry);
+
+		if (pmd_downgrade) {
+			radix_tree_delete(&mapping->page_tree, index);
+			mapping->nrexceptional--;
+			dax_wake_mapping_entry_waiter(entry, mapping, index,
+					false);
+		}
+
+		entry = RADIX_DAX_EMPTY_ENTRY(new_type);
+
+		err = __radix_tree_insert(&mapping->page_tree, index,
+				RADIX_DAX_ORDER(new_type), entry);
 		radix_tree_preload_end();
 		if (err) {
 			spin_unlock_irq(&mapping->tree_lock);
 			/* Someone already created the entry? */
-			if (err == -EEXIST)
+			if (err == -EEXIST && new_type == RADIX_DAX_PTE)
 				goto restart;
 			return ERR_PTR(err);
 		}
@@ -595,15 +612,15 @@ static int copy_user_bh(struct page *to, struct inode *inode,
 	return 0;
 }
 
-#define DAX_PMD_INDEX(page_index) (page_index & (PMD_MASK >> PAGE_SHIFT))
-
 static void *dax_insert_mapping_entry(struct address_space *mapping,
 				      struct vm_fault *vmf,
-				      void *entry, sector_t sector)
+				      void *entry, sector_t sector,
+				      unsigned long new_type, bool hzp)
 {
 	struct radix_tree_root *page_tree = &mapping->page_tree;
 	int error = 0;
 	bool hole_fill = false;
+	bool hzp_fill = false;
 	void *new_entry;
 	pgoff_t index = vmf->pgoff;
 
@@ -622,22 +639,30 @@ static void *dax_insert_mapping_entry(struct address_space *mapping,
 		error = radix_tree_preload(vmf->gfp_mask & ~__GFP_HIGHMEM);
 		if (error)
 			return ERR_PTR(error);
+	} else if ((unsigned long)entry & RADIX_DAX_HZP && !hzp) {
+		hzp_fill = true;
+		unmap_mapping_range(mapping,
+			(vmf->pgoff << PAGE_SHIFT) & PMD_MASK, PMD_SIZE, 0);
 	}
 
 	spin_lock_irq(&mapping->tree_lock);
-	new_entry = (void *)((unsigned long)RADIX_DAX_ENTRY(sector, false) |
-		       RADIX_DAX_ENTRY_LOCK);
+	if (hzp)
+		new_entry = RADIX_DAX_HZP_ENTRY();
+	else
+		new_entry = RADIX_DAX_ENTRY(sector, new_type);
+
 	if (hole_fill) {
 		__delete_from_page_cache(entry, NULL);
 		/* Drop pagecache reference */
 		put_page(entry);
-		error = radix_tree_insert(page_tree, index, new_entry);
+		error = __radix_tree_insert(page_tree, index,
+				RADIX_DAX_ORDER(new_type), new_entry);
 		if (error) {
 			new_entry = ERR_PTR(error);
 			goto unlock;
 		}
 		mapping->nrexceptional++;
-	} else {
+	} else if ((unsigned long)entry & (RADIX_DAX_HZP|RADIX_DAX_EMPTY)) {
 		void **slot;
 		void *ret;
 
@@ -693,6 +718,18 @@ static int dax_writeback_one(struct block_device *bdev,
 		goto unlock;
 	}
 
+	if (WARN_ON_ONCE((unsigned long)entry & RADIX_DAX_EMPTY)) {
+		ret = -EIO;
+		goto unlock;
+	}
+
+	/*
+	 * Even if dax_writeback_mapping_range() was given a wbc->range_start
+	 * in the middle of a PMD, the 'index' we are given will be aligned to
+	 * the start index of the PMD, as will the sector we pull from
+	 * 'entry'.  This allows us to flush for PMD_SIZE and not have to
+	 * worry about partial PMD writebacks.
+	 */
 	dax.sector = RADIX_DAX_SECTOR(entry);
 	dax.size = (type == RADIX_DAX_PMD ? PMD_SIZE : PAGE_SIZE);
 	spin_unlock_irq(&mapping->tree_lock);
@@ -733,12 +770,11 @@ int dax_writeback_mapping_range(struct address_space *mapping,
 		struct block_device *bdev, struct writeback_control *wbc)
 {
 	struct inode *inode = mapping->host;
-	pgoff_t start_index, end_index, pmd_index;
+	pgoff_t start_index, end_index;
 	pgoff_t indices[PAGEVEC_SIZE];
 	struct pagevec pvec;
 	bool done = false;
 	int i, ret = 0;
-	void *entry;
 
 	if (WARN_ON_ONCE(inode->i_blkbits != PAGE_SHIFT))
 		return -EIO;
@@ -748,15 +784,6 @@ int dax_writeback_mapping_range(struct address_space *mapping,
 
 	start_index = wbc->range_start >> PAGE_SHIFT;
 	end_index = wbc->range_end >> PAGE_SHIFT;
-	pmd_index = DAX_PMD_INDEX(start_index);
-
-	rcu_read_lock();
-	entry = radix_tree_lookup(&mapping->page_tree, pmd_index);
-	rcu_read_unlock();
-
-	/* see if the start of our range is covered by a PMD entry */
-	if (entry && RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD)
-		start_index = pmd_index;
 
 	tag_pages_for_writeback(mapping, start_index, end_index);
 
@@ -802,7 +829,8 @@ static int dax_insert_mapping(struct address_space *mapping,
 		return PTR_ERR(dax.addr);
 	dax_unmap_atomic(bdev, &dax);
 
-	ret = dax_insert_mapping_entry(mapping, vmf, entry, dax.sector);
+	ret = dax_insert_mapping_entry(mapping, vmf, entry, dax.sector,
+			RADIX_DAX_PTE, false);
 	if (IS_ERR(ret))
 		return PTR_ERR(ret);
 	*entryp = ret;
@@ -849,7 +877,7 @@ int dax_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
 	bh.b_bdev = inode->i_sb->s_bdev;
 	bh.b_size = PAGE_SIZE;
 
-	entry = grab_mapping_entry(mapping, vmf->pgoff);
+	entry = grab_mapping_entry(mapping, vmf->pgoff, RADIX_DAX_PTE);
 	if (IS_ERR(entry)) {
 		error = PTR_ERR(entry);
 		goto out;
@@ -953,9 +981,11 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 	bool write = flags & FAULT_FLAG_WRITE;
 	struct block_device *bdev;
 	pgoff_t size, pgoff;
+	struct vm_fault vmf;
 	sector_t block;
 	int result = 0;
-	bool alloc = false;
+	void *entry, *ret;
+
 
 	/* dax pmd mappings require pfn_t_devmap() */
 	if (!IS_ENABLED(CONFIG_FS_DAX_PMD))
@@ -977,6 +1007,11 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 		return VM_FAULT_FALLBACK;
 	}
 
+	/*
+	 * Check whether offset isn't beyond end of file now. Caller is supposed
+	 * to hold locks serializing us with truncate / punch hole so this is
+	 * a reliable test.
+	 */
 	pgoff = linear_page_index(vma, pmd_addr);
 	size = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	if (pgoff >= size)
@@ -994,37 +1029,45 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 
 	bh.b_size = PMD_SIZE;
 
-	if (get_block(inode, block, &bh, 0) != 0)
-		return VM_FAULT_SIGBUS;
+	/*
+	 * grab_mapping_entry() will make sure we get a 2M empty entry, a DAX
+	 * PMD or a HZP entry.  If it can't (because a 4k page is already in
+	 * the tree, for instance), it will return -EEXIST and we just fall
+	 * back to 4k entries.
+	 */
+	entry = grab_mapping_entry(mapping, pgoff, RADIX_DAX_PMD);
+	if (IS_ERR(entry))
+		return VM_FAULT_FALLBACK;
+
+	if (get_block(inode, block, &bh, 0) != 0) {
+		result = VM_FAULT_SIGBUS;
+		goto unlock_entry;
+	}
 
 	if (!buffer_mapped(&bh) && write) {
-		if (get_block(inode, block, &bh, 1) != 0)
-			return VM_FAULT_SIGBUS;
-		alloc = true;
-		WARN_ON_ONCE(buffer_unwritten(&bh) || buffer_new(&bh));
+		if (get_block(inode, block, &bh, 1) != 0) {
+			result = VM_FAULT_SIGBUS;
+			goto unlock_entry;
+		}
 	}
 
+	/* Filesystem should not return unwritten buffers to us! */
+	WARN_ON_ONCE(buffer_unwritten(&bh) || buffer_new(&bh));
+
 	bdev = bh.b_bdev;
 
 	if (bh.b_size < PMD_SIZE) {
 		dax_pmd_dbg(&bh, address, "allocated block too small");
-		return VM_FAULT_FALLBACK;
+		goto fallback;
 	}
 
-	/*
-	 * If we allocated new storage, make sure no process has any
-	 * zero pages covering this hole
-	 */
-	if (alloc) {
-		loff_t lstart = pgoff << PAGE_SHIFT;
-		loff_t lend = lstart + PMD_SIZE - 1; /* inclusive */
-
-		truncate_pagecache_range(inode, lstart, lend);
-	}
+	vmf.pgoff = pgoff;
+	vmf.flags = flags;
+	vmf.gfp_mask = mapping_gfp_mask(mapping) | __GFP_FS | __GFP_IO;
 
 	if (!write && !buffer_mapped(&bh)) {
 		spinlock_t *ptl;
-		pmd_t entry;
+		pmd_t pmd_entry;
 		struct page *zero_page = get_huge_zero_page();
 
 		if (unlikely(!zero_page)) {
@@ -1032,6 +1075,15 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 			goto fallback;
 		}
 
+		ret = dax_insert_mapping_entry(mapping, &vmf, entry,
+				0, RADIX_DAX_PMD, true);
+		if (IS_ERR(ret)) {
+			dax_pmd_dbg(&bh, address,
+					"PMD radix insertion failed");
+			goto fallback;
+		}
+		entry = ret;
+
 		ptl = pmd_lock(vma->vm_mm, pmd);
 		if (!pmd_none(*pmd)) {
 			spin_unlock(ptl);
@@ -1044,9 +1096,9 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 				__func__, current->comm, address,
 				(unsigned long long) to_sector(&bh, inode));
 
-		entry = mk_pmd(zero_page, vma->vm_page_prot);
-		entry = pmd_mkhuge(entry);
-		set_pmd_at(vma->vm_mm, pmd_addr, pmd, entry);
+		pmd_entry = mk_pmd(zero_page, vma->vm_page_prot);
+		pmd_entry = pmd_mkhuge(pmd_entry);
+		set_pmd_at(vma->vm_mm, pmd_addr, pmd, pmd_entry);
 		result = VM_FAULT_NOPAGE;
 		spin_unlock(ptl);
 	} else {
@@ -1078,27 +1130,14 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 		}
 		dax_unmap_atomic(bdev, &dax);
 
-		/*
-		 * For PTE faults we insert a radix tree entry for reads, and
-		 * leave it clean.  Then on the first write we dirty the radix
-		 * tree entry via the dax_pfn_mkwrite() path.  This sequence
-		 * allows the dax_pfn_mkwrite() call to be simpler and avoid a
-		 * call into get_block() to translate the pgoff to a sector in
-		 * order to be able to create a new radix tree entry.
-		 *
-		 * The PMD path doesn't have an equivalent to
-		 * dax_pfn_mkwrite(), though, so for a read followed by a
-		 * write we traverse all the way through dax_pmd_fault()
-		 * twice.  This means we can just skip inserting a radix tree
-		 * entry completely on the initial read and just wait until
-		 * the write to insert a dirty entry.
-		 */
-		if (write) {
-			/*
-			 * We should insert radix-tree entry and dirty it here.
-			 * For now this is broken...
-			 */
+		ret = dax_insert_mapping_entry(mapping, &vmf, entry,
+				dax.sector, RADIX_DAX_PMD, false);
+		if (IS_ERR(ret)) {
+			dax_pmd_dbg(&bh, address,
+					"PMD radix insertion failed");
+			goto fallback;
 		}
+		entry = ret;
 
 		dev_dbg(part_to_dev(bdev->bd_part),
 				"%s: %s addr: %lx pfn: %lx sect: %llx\n",
@@ -1109,13 +1148,14 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 				dax.pfn, write);
 	}
 
- out:
+ unlock_entry:
+	put_locked_mapping_entry(mapping, pgoff, entry);
 	return result;
 
  fallback:
 	count_vm_event(THP_FAULT_FALLBACK);
 	result = VM_FAULT_FALLBACK;
-	goto out;
+	goto unlock_entry;
 }
 EXPORT_SYMBOL_GPL(dax_pmd_fault);
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git a/include/linux/dax.h b/include/linux/dax.h
index f6cab31..bdf6064 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -6,8 +6,33 @@
 #include <linux/radix-tree.h>
 #include <asm/pgtable.h>
 
-/* We use lowest available exceptional entry bit for locking */
+/*
+ * We use lowest available bit in exceptional entry for locking, two bits for
+ * the entry type (PMD & PTE), and two more for flags (HZP and empty).  In
+ * total five special bits.
+ */
+#define RADIX_DAX_SHIFT	(RADIX_TREE_EXCEPTIONAL_SHIFT + 5)
 #define RADIX_DAX_ENTRY_LOCK (1 << RADIX_TREE_EXCEPTIONAL_SHIFT)
+/* PTE and PMD types */
+#define RADIX_DAX_PTE (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 1))
+#define RADIX_DAX_PMD (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 2))
+/* huge zero page and empty entry flags */
+#define RADIX_DAX_HZP (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 3))
+#define RADIX_DAX_EMPTY (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 4))
+
+#define RADIX_DAX_TYPE_MASK (RADIX_DAX_PTE | RADIX_DAX_PMD)
+#define RADIX_DAX_TYPE(entry) ((unsigned long)entry & RADIX_DAX_TYPE_MASK)
+#define RADIX_DAX_SECTOR(entry) (((unsigned long)entry >> RADIX_DAX_SHIFT))
+
+/* entries begin locked */
+#define RADIX_DAX_ENTRY(sector, type) ((void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |\
+	type | (unsigned long)sector << RADIX_DAX_SHIFT | RADIX_DAX_ENTRY_LOCK))
+#define RADIX_DAX_HZP_ENTRY() ((void *)(RADIX_TREE_EXCEPTIONAL_ENTRY | \
+	RADIX_DAX_PMD | RADIX_DAX_HZP | RADIX_DAX_EMPTY | RADIX_DAX_ENTRY_LOCK))
+#define RADIX_DAX_EMPTY_ENTRY(type) ((void *)(RADIX_TREE_EXCEPTIONAL_ENTRY | \
+		type | RADIX_DAX_EMPTY | RADIX_DAX_ENTRY_LOCK))
+
+#define RADIX_DAX_ORDER(type) (type == RADIX_DAX_PMD ? PMD_SHIFT-PAGE_SHIFT : 0)
 
 ssize_t dax_do_io(struct kiocb *, struct inode *, struct iov_iter *,
 		  get_block_t, dio_iodone_t, int flags);
diff --git a/mm/filemap.c b/mm/filemap.c
index 35e880d..d9dd97e 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -610,9 +610,7 @@ static int page_cache_tree_insert(struct address_space *mapping,
 				workingset_node_shadows_dec(node);
 		} else {
 			/* DAX can replace empty locked entry with a hole */
-			WARN_ON_ONCE(p !=
-				(void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
-					 RADIX_DAX_ENTRY_LOCK));
+			WARN_ON_ONCE(p != RADIX_DAX_EMPTY_ENTRY(RADIX_DAX_PTE));
 			/* DAX accounts exceptional entries as normal pages */
 			if (node)
 				workingset_node_pages_dec(node);
-- 
2.9.0

[PATCH v2 8/9] dax: re-enable DAX PMD support

[Ross Zwisler]

DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
locking.  This patch allows DAX PMDs to participate in the DAX radix tree
based locking scheme so that they can be re-enabled.

There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX
mappings that have an associated block allocation, and 4k DAX empty
entries.  The empty entries exist to provide locking for the duration of a
given page fault.

This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP)
entries, PMD DAX entries that have associated block allocations, and 2 MiB
DAX empty entries.

Unlike the 4k case where we insert a struct page* into the radix tree for
4k zero pages, for HZP we insert a DAX exceptional entry with the new
RADIX_DAX_HZP flag set.  This is because we use a single 2 MiB zero page in
every 2MiB hole mapping, and it doesn't make sense to have that same struct
page* with multiple entries in multiple trees.  This would cause contention
on the single page lock for the one Huge Zero Page, and it would break the
page->index and page->mapping associations that are assumed to be valid in
many other places in the kernel.

One difficult use case is when one thread is trying to use 4k entries in
radix tree for a given offset, and another thread is using 2 MiB entries
for that same offset.  The current code handles this by making the 2 MiB
user fall back to 4k entries for most cases.  This was done because it is
the simplest solution, and because the use of 2MiB pages is already
opportunistic.

If we were to try to upgrade from 4k pages to 2MiB pages for a given range,
we run into the problem of how we lock out 4k page faults for the entire
2MiB range while we clean out the radix tree so we can insert the 2MiB
entry.  We can solve this problem if we need to, but I think that the cases
where both 2MiB entries and 4K entries are being used for the same range
will be rare enough and the gain small enough that it probably won't be
worth the complexity.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c            | 208 +++++++++++++++++++++++++++++++---------------------
 include/linux/dax.h |  27 ++++++-
 mm/filemap.c        |   4 +-
 3 files changed, 151 insertions(+), 88 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 955e184..d11c996 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -32,20 +32,6 @@
 #include <linux/pfn_t.h>
 #include <linux/sizes.h>
 
-/*
- * We use lowest available bit in exceptional entry for locking, other two
- * bits to determine entry type. In total 3 special bits.
- */
-#define RADIX_DAX_SHIFT	(RADIX_TREE_EXCEPTIONAL_SHIFT + 3)
-#define RADIX_DAX_PTE (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 1))
-#define RADIX_DAX_PMD (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 2))
-#define RADIX_DAX_TYPE_MASK (RADIX_DAX_PTE | RADIX_DAX_PMD)
-#define RADIX_DAX_TYPE(entry) ((unsigned long)entry & RADIX_DAX_TYPE_MASK)
-#define RADIX_DAX_SECTOR(entry) (((unsigned long)entry >> RADIX_DAX_SHIFT))
-#define RADIX_DAX_ENTRY(sector, pmd) ((void *)((unsigned long)sector << \
-		RADIX_DAX_SHIFT | (pmd ? RADIX_DAX_PMD : RADIX_DAX_PTE) | \
-		RADIX_TREE_EXCEPTIONAL_ENTRY))
-
 /* We choose 4096 entries - same as per-zone page wait tables */
 #define DAX_WAIT_TABLE_BITS 12
 #define DAX_WAIT_TABLE_ENTRIES (1 << DAX_WAIT_TABLE_BITS)
@@ -402,15 +388,32 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
  * persistent memory the benefit is doubtful. We can add that later if we can
  * show it helps.
  */
-static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index)
+static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index,
+		unsigned long new_type)
 {
+	bool pmd_downgrade = false;
 	void *entry, **slot;
 
 restart:
 	spin_lock_irq(&mapping->tree_lock);
 	entry = get_unlocked_mapping_entry(mapping, index, &slot);
+
+	if (entry && new_type == RADIX_DAX_PMD) {
+		if (!radix_tree_exceptional_entry(entry) ||
+				RADIX_DAX_TYPE(entry) == RADIX_DAX_PTE) {
+			spin_unlock_irq(&mapping->tree_lock);
+			return ERR_PTR(-EEXIST);
+		}
+	} else if (entry && new_type == RADIX_DAX_PTE) {
+		if (radix_tree_exceptional_entry(entry) &&
+		    RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD &&
+		    (unsigned long)entry & (RADIX_DAX_HZP|RADIX_DAX_EMPTY)) {
+			pmd_downgrade = true;
+		}
+	}
+
 	/* No entry for given index? Make sure radix tree is big enough. */
-	if (!entry) {
+	if (!entry || pmd_downgrade) {
 		int err;
 
 		spin_unlock_irq(&mapping->tree_lock);
@@ -418,15 +421,29 @@ restart:
 				mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM);
 		if (err)
 			return ERR_PTR(err);
-		entry = (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
-			       RADIX_DAX_ENTRY_LOCK);
+
+		if (pmd_downgrade && ((unsigned long)entry & RADIX_DAX_HZP))
+			unmap_mapping_range(mapping,
+				(index << PAGE_SHIFT) & PMD_MASK, PMD_SIZE, 0);
+
 		spin_lock_irq(&mapping->tree_lock);
-		err = radix_tree_insert(&mapping->page_tree, index, entry);
+
+		if (pmd_downgrade) {
+			radix_tree_delete(&mapping->page_tree, index);
+			mapping->nrexceptional--;
+			dax_wake_mapping_entry_waiter(entry, mapping, index,
+					false);
+		}
+
+		entry = RADIX_DAX_EMPTY_ENTRY(new_type);
+
+		err = __radix_tree_insert(&mapping->page_tree, index,
+				RADIX_DAX_ORDER(new_type), entry);
 		radix_tree_preload_end();
 		if (err) {
 			spin_unlock_irq(&mapping->tree_lock);
 			/* Someone already created the entry? */
-			if (err == -EEXIST)
+			if (err == -EEXIST && new_type == RADIX_DAX_PTE)
 				goto restart;
 			return ERR_PTR(err);
 		}
@@ -595,15 +612,15 @@ static int copy_user_bh(struct page *to, struct inode *inode,
 	return 0;
 }
 
-#define DAX_PMD_INDEX(page_index) (page_index & (PMD_MASK >> PAGE_SHIFT))
-
 static void *dax_insert_mapping_entry(struct address_space *mapping,
 				      struct vm_fault *vmf,
-				      void *entry, sector_t sector)
+				      void *entry, sector_t sector,
+				      unsigned long new_type, bool hzp)
 {
 	struct radix_tree_root *page_tree = &mapping->page_tree;
 	int error = 0;
 	bool hole_fill = false;
+	bool hzp_fill = false;
 	void *new_entry;
 	pgoff_t index = vmf->pgoff;
 
@@ -622,22 +639,30 @@ static void *dax_insert_mapping_entry(struct address_space *mapping,
 		error = radix_tree_preload(vmf->gfp_mask & ~__GFP_HIGHMEM);
 		if (error)
 			return ERR_PTR(error);
+	} else if ((unsigned long)entry & RADIX_DAX_HZP && !hzp) {
+		hzp_fill = true;
+		unmap_mapping_range(mapping,
+			(vmf->pgoff << PAGE_SHIFT) & PMD_MASK, PMD_SIZE, 0);
 	}
 
 	spin_lock_irq(&mapping->tree_lock);
-	new_entry = (void *)((unsigned long)RADIX_DAX_ENTRY(sector, false) |
-		       RADIX_DAX_ENTRY_LOCK);
+	if (hzp)
+		new_entry = RADIX_DAX_HZP_ENTRY();
+	else
+		new_entry = RADIX_DAX_ENTRY(sector, new_type);
+
 	if (hole_fill) {
 		__delete_from_page_cache(entry, NULL);
 		/* Drop pagecache reference */
 		put_page(entry);
-		error = radix_tree_insert(page_tree, index, new_entry);
+		error = __radix_tree_insert(page_tree, index,
+				RADIX_DAX_ORDER(new_type), new_entry);
 		if (error) {
 			new_entry = ERR_PTR(error);
 			goto unlock;
 		}
 		mapping->nrexceptional++;
-	} else {
+	} else if ((unsigned long)entry & (RADIX_DAX_HZP|RADIX_DAX_EMPTY)) {
 		void **slot;
 		void *ret;
 
@@ -693,6 +718,18 @@ static int dax_writeback_one(struct block_device *bdev,
 		goto unlock;
 	}
 
+	if (WARN_ON_ONCE((unsigned long)entry & RADIX_DAX_EMPTY)) {
+		ret = -EIO;
+		goto unlock;
+	}
+
+	/*
+	 * Even if dax_writeback_mapping_range() was given a wbc->range_start
+	 * in the middle of a PMD, the 'index' we are given will be aligned to
+	 * the start index of the PMD, as will the sector we pull from
+	 * 'entry'.  This allows us to flush for PMD_SIZE and not have to
+	 * worry about partial PMD writebacks.
+	 */
 	dax.sector = RADIX_DAX_SECTOR(entry);
 	dax.size = (type == RADIX_DAX_PMD ? PMD_SIZE : PAGE_SIZE);
 	spin_unlock_irq(&mapping->tree_lock);
@@ -733,12 +770,11 @@ int dax_writeback_mapping_range(struct address_space *mapping,
 		struct block_device *bdev, struct writeback_control *wbc)
 {
 	struct inode *inode = mapping->host;
-	pgoff_t start_index, end_index, pmd_index;
+	pgoff_t start_index, end_index;
 	pgoff_t indices[PAGEVEC_SIZE];
 	struct pagevec pvec;
 	bool done = false;
 	int i, ret = 0;
-	void *entry;
 
 	if (WARN_ON_ONCE(inode->i_blkbits != PAGE_SHIFT))
 		return -EIO;
@@ -748,15 +784,6 @@ int dax_writeback_mapping_range(struct address_space *mapping,
 
 	start_index = wbc->range_start >> PAGE_SHIFT;
 	end_index = wbc->range_end >> PAGE_SHIFT;
-	pmd_index = DAX_PMD_INDEX(start_index);
-
-	rcu_read_lock();
-	entry = radix_tree_lookup(&mapping->page_tree, pmd_index);
-	rcu_read_unlock();
-
-	/* see if the start of our range is covered by a PMD entry */
-	if (entry && RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD)
-		start_index = pmd_index;
 
 	tag_pages_for_writeback(mapping, start_index, end_index);
 
@@ -802,7 +829,8 @@ static int dax_insert_mapping(struct address_space *mapping,
 		return PTR_ERR(dax.addr);
 	dax_unmap_atomic(bdev, &dax);
 
-	ret = dax_insert_mapping_entry(mapping, vmf, entry, dax.sector);
+	ret = dax_insert_mapping_entry(mapping, vmf, entry, dax.sector,
+			RADIX_DAX_PTE, false);
 	if (IS_ERR(ret))
 		return PTR_ERR(ret);
 	*entryp = ret;
@@ -849,7 +877,7 @@ int dax_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
 	bh.b_bdev = inode->i_sb->s_bdev;
 	bh.b_size = PAGE_SIZE;
 
-	entry = grab_mapping_entry(mapping, vmf->pgoff);
+	entry = grab_mapping_entry(mapping, vmf->pgoff, RADIX_DAX_PTE);
 	if (IS_ERR(entry)) {
 		error = PTR_ERR(entry);
 		goto out;
@@ -953,9 +981,11 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 	bool write = flags & FAULT_FLAG_WRITE;
 	struct block_device *bdev;
 	pgoff_t size, pgoff;
+	struct vm_fault vmf;
 	sector_t block;
 	int result = 0;
-	bool alloc = false;
+	void *entry, *ret;
+
 
 	/* dax pmd mappings require pfn_t_devmap() */
 	if (!IS_ENABLED(CONFIG_FS_DAX_PMD))
@@ -977,6 +1007,11 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 		return VM_FAULT_FALLBACK;
 	}
 
+	/*
+	 * Check whether offset isn't beyond end of file now. Caller is supposed
+	 * to hold locks serializing us with truncate / punch hole so this is
+	 * a reliable test.
+	 */
 	pgoff = linear_page_index(vma, pmd_addr);
 	size = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	if (pgoff >= size)
@@ -994,37 +1029,45 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 
 	bh.b_size = PMD_SIZE;
 
-	if (get_block(inode, block, &bh, 0) != 0)
-		return VM_FAULT_SIGBUS;
+	/*
+	 * grab_mapping_entry() will make sure we get a 2M empty entry, a DAX
+	 * PMD or a HZP entry.  If it can't (because a 4k page is already in
+	 * the tree, for instance), it will return -EEXIST and we just fall
+	 * back to 4k entries.
+	 */
+	entry = grab_mapping_entry(mapping, pgoff, RADIX_DAX_PMD);
+	if (IS_ERR(entry))
+		return VM_FAULT_FALLBACK;
+
+	if (get_block(inode, block, &bh, 0) != 0) {
+		result = VM_FAULT_SIGBUS;
+		goto unlock_entry;
+	}
 
 	if (!buffer_mapped(&bh) && write) {
-		if (get_block(inode, block, &bh, 1) != 0)
-			return VM_FAULT_SIGBUS;
-		alloc = true;
-		WARN_ON_ONCE(buffer_unwritten(&bh) || buffer_new(&bh));
+		if (get_block(inode, block, &bh, 1) != 0) {
+			result = VM_FAULT_SIGBUS;
+			goto unlock_entry;
+		}
 	}
 
+	/* Filesystem should not return unwritten buffers to us! */
+	WARN_ON_ONCE(buffer_unwritten(&bh) || buffer_new(&bh));
+
 	bdev = bh.b_bdev;
 
 	if (bh.b_size < PMD_SIZE) {
 		dax_pmd_dbg(&bh, address, "allocated block too small");
-		return VM_FAULT_FALLBACK;
+		goto fallback;
 	}
 
-	/*
-	 * If we allocated new storage, make sure no process has any
-	 * zero pages covering this hole
-	 */
-	if (alloc) {
-		loff_t lstart = pgoff << PAGE_SHIFT;
-		loff_t lend = lstart + PMD_SIZE - 1; /* inclusive */
-
-		truncate_pagecache_range(inode, lstart, lend);
-	}
+	vmf.pgoff = pgoff;
+	vmf.flags = flags;
+	vmf.gfp_mask = mapping_gfp_mask(mapping) | __GFP_FS | __GFP_IO;
 
 	if (!write && !buffer_mapped(&bh)) {
 		spinlock_t *ptl;
-		pmd_t entry;
+		pmd_t pmd_entry;
 		struct page *zero_page = get_huge_zero_page();
 
 		if (unlikely(!zero_page)) {
@@ -1032,6 +1075,15 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 			goto fallback;
 		}
 
+		ret = dax_insert_mapping_entry(mapping, &vmf, entry,
+				0, RADIX_DAX_PMD, true);
+		if (IS_ERR(ret)) {
+			dax_pmd_dbg(&bh, address,
+					"PMD radix insertion failed");
+			goto fallback;
+		}
+		entry = ret;
+
 		ptl = pmd_lock(vma->vm_mm, pmd);
 		if (!pmd_none(*pmd)) {
 			spin_unlock(ptl);
@@ -1044,9 +1096,9 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 				__func__, current->comm, address,
 				(unsigned long long) to_sector(&bh, inode));
 
-		entry = mk_pmd(zero_page, vma->vm_page_prot);
-		entry = pmd_mkhuge(entry);
-		set_pmd_at(vma->vm_mm, pmd_addr, pmd, entry);
+		pmd_entry = mk_pmd(zero_page, vma->vm_page_prot);
+		pmd_entry = pmd_mkhuge(pmd_entry);
+		set_pmd_at(vma->vm_mm, pmd_addr, pmd, pmd_entry);
 		result = VM_FAULT_NOPAGE;
 		spin_unlock(ptl);
 	} else {
@@ -1078,27 +1130,14 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 		}
 		dax_unmap_atomic(bdev, &dax);
 
-		/*
-		 * For PTE faults we insert a radix tree entry for reads, and
-		 * leave it clean.  Then on the first write we dirty the radix
-		 * tree entry via the dax_pfn_mkwrite() path.  This sequence
-		 * allows the dax_pfn_mkwrite() call to be simpler and avoid a
-		 * call into get_block() to translate the pgoff to a sector in
-		 * order to be able to create a new radix tree entry.
-		 *
-		 * The PMD path doesn't have an equivalent to
-		 * dax_pfn_mkwrite(), though, so for a read followed by a
-		 * write we traverse all the way through dax_pmd_fault()
-		 * twice.  This means we can just skip inserting a radix tree
-		 * entry completely on the initial read and just wait until
-		 * the write to insert a dirty entry.
-		 */
-		if (write) {
-			/*
-			 * We should insert radix-tree entry and dirty it here.
-			 * For now this is broken...
-			 */
+		ret = dax_insert_mapping_entry(mapping, &vmf, entry,
+				dax.sector, RADIX_DAX_PMD, false);
+		if (IS_ERR(ret)) {
+			dax_pmd_dbg(&bh, address,
+					"PMD radix insertion failed");
+			goto fallback;
 		}
+		entry = ret;
 
 		dev_dbg(part_to_dev(bdev->bd_part),
 				"%s: %s addr: %lx pfn: %lx sect: %llx\n",
@@ -1109,13 +1148,14 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 				dax.pfn, write);
 	}
 
- out:
+ unlock_entry:
+	put_locked_mapping_entry(mapping, pgoff, entry);
 	return result;
 
  fallback:
 	count_vm_event(THP_FAULT_FALLBACK);
 	result = VM_FAULT_FALLBACK;
-	goto out;
+	goto unlock_entry;
 }
 EXPORT_SYMBOL_GPL(dax_pmd_fault);
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git a/include/linux/dax.h b/include/linux/dax.h
index f6cab31..bdf6064 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -6,8 +6,33 @@
 #include <linux/radix-tree.h>
 #include <asm/pgtable.h>
 
-/* We use lowest available exceptional entry bit for locking */
+/*
+ * We use lowest available bit in exceptional entry for locking, two bits for
+ * the entry type (PMD & PTE), and two more for flags (HZP and empty).  In
+ * total five special bits.
+ */
+#define RADIX_DAX_SHIFT	(RADIX_TREE_EXCEPTIONAL_SHIFT + 5)
 #define RADIX_DAX_ENTRY_LOCK (1 << RADIX_TREE_EXCEPTIONAL_SHIFT)
+/* PTE and PMD types */
+#define RADIX_DAX_PTE (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 1))
+#define RADIX_DAX_PMD (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 2))
+/* huge zero page and empty entry flags */
+#define RADIX_DAX_HZP (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 3))
+#define RADIX_DAX_EMPTY (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 4))
+
+#define RADIX_DAX_TYPE_MASK (RADIX_DAX_PTE | RADIX_DAX_PMD)
+#define RADIX_DAX_TYPE(entry) ((unsigned long)entry & RADIX_DAX_TYPE_MASK)
+#define RADIX_DAX_SECTOR(entry) (((unsigned long)entry >> RADIX_DAX_SHIFT))
+
+/* entries begin locked */
+#define RADIX_DAX_ENTRY(sector, type) ((void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |\
+	type | (unsigned long)sector << RADIX_DAX_SHIFT | RADIX_DAX_ENTRY_LOCK))
+#define RADIX_DAX_HZP_ENTRY() ((void *)(RADIX_TREE_EXCEPTIONAL_ENTRY | \
+	RADIX_DAX_PMD | RADIX_DAX_HZP | RADIX_DAX_EMPTY | RADIX_DAX_ENTRY_LOCK))
+#define RADIX_DAX_EMPTY_ENTRY(type) ((void *)(RADIX_TREE_EXCEPTIONAL_ENTRY | \
+		type | RADIX_DAX_EMPTY | RADIX_DAX_ENTRY_LOCK))
+
+#define RADIX_DAX_ORDER(type) (type == RADIX_DAX_PMD ? PMD_SHIFT-PAGE_SHIFT : 0)
 
 ssize_t dax_do_io(struct kiocb *, struct inode *, struct iov_iter *,
 		  get_block_t, dio_iodone_t, int flags);
diff --git a/mm/filemap.c b/mm/filemap.c
index 35e880d..d9dd97e 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -610,9 +610,7 @@ static int page_cache_tree_insert(struct address_space *mapping,
 				workingset_node_shadows_dec(node);
 		} else {
 			/* DAX can replace empty locked entry with a hole */
-			WARN_ON_ONCE(p !=
-				(void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
-					 RADIX_DAX_ENTRY_LOCK));
+			WARN_ON_ONCE(p != RADIX_DAX_EMPTY_ENTRY(RADIX_DAX_PTE));
 			/* DAX accounts exceptional entries as normal pages */
 			if (node)
 				workingset_node_pages_dec(node);
-- 
2.9.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v2 8/9] dax: re-enable DAX PMD support

[Ross Zwisler]

DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
locking.  This patch allows DAX PMDs to participate in the DAX radix tree
based locking scheme so that they can be re-enabled.

There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX
mappings that have an associated block allocation, and 4k DAX empty
entries.  The empty entries exist to provide locking for the duration of a
given page fault.

This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP)
entries, PMD DAX entries that have associated block allocations, and 2 MiB
DAX empty entries.

Unlike the 4k case where we insert a struct page* into the radix tree for
4k zero pages, for HZP we insert a DAX exceptional entry with the new
RADIX_DAX_HZP flag set.  This is because we use a single 2 MiB zero page in
every 2MiB hole mapping, and it doesn't make sense to have that same struct
page* with multiple entries in multiple trees.  This would cause contention
on the single page lock for the one Huge Zero Page, and it would break the
page->index and page->mapping associations that are assumed to be valid in
many other places in the kernel.

One difficult use case is when one thread is trying to use 4k entries in
radix tree for a given offset, and another thread is using 2 MiB entries
for that same offset.  The current code handles this by making the 2 MiB
user fall back to 4k entries for most cases.  This was done because it is
the simplest solution, and because the use of 2MiB pages is already
opportunistic.

If we were to try to upgrade from 4k pages to 2MiB pages for a given range,
we run into the problem of how we lock out 4k page faults for the entire
2MiB range while we clean out the radix tree so we can insert the 2MiB
entry.  We can solve this problem if we need to, but I think that the cases
where both 2MiB entries and 4K entries are being used for the same range
will be rare enough and the gain small enough that it probably won't be
worth the complexity.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c            | 208 +++++++++++++++++++++++++++++++---------------------
 include/linux/dax.h |  27 ++++++-
 mm/filemap.c        |   4 +-
 3 files changed, 151 insertions(+), 88 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 955e184..d11c996 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -32,20 +32,6 @@
 #include <linux/pfn_t.h>
 #include <linux/sizes.h>
 
-/*
- * We use lowest available bit in exceptional entry for locking, other two
- * bits to determine entry type. In total 3 special bits.
- */
-#define RADIX_DAX_SHIFT	(RADIX_TREE_EXCEPTIONAL_SHIFT + 3)
-#define RADIX_DAX_PTE (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 1))
-#define RADIX_DAX_PMD (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 2))
-#define RADIX_DAX_TYPE_MASK (RADIX_DAX_PTE | RADIX_DAX_PMD)
-#define RADIX_DAX_TYPE(entry) ((unsigned long)entry & RADIX_DAX_TYPE_MASK)
-#define RADIX_DAX_SECTOR(entry) (((unsigned long)entry >> RADIX_DAX_SHIFT))
-#define RADIX_DAX_ENTRY(sector, pmd) ((void *)((unsigned long)sector << \
-		RADIX_DAX_SHIFT | (pmd ? RADIX_DAX_PMD : RADIX_DAX_PTE) | \
-		RADIX_TREE_EXCEPTIONAL_ENTRY))
-
 /* We choose 4096 entries - same as per-zone page wait tables */
 #define DAX_WAIT_TABLE_BITS 12
 #define DAX_WAIT_TABLE_ENTRIES (1 << DAX_WAIT_TABLE_BITS)
@@ -402,15 +388,32 @@ static void *get_unlocked_mapping_entry(struct address_space *mapping,
  * persistent memory the benefit is doubtful. We can add that later if we can
  * show it helps.
  */
-static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index)
+static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index,
+		unsigned long new_type)
 {
+	bool pmd_downgrade = false;
 	void *entry, **slot;
 
 restart:
 	spin_lock_irq(&mapping->tree_lock);
 	entry = get_unlocked_mapping_entry(mapping, index, &slot);
+
+	if (entry && new_type == RADIX_DAX_PMD) {
+		if (!radix_tree_exceptional_entry(entry) ||
+				RADIX_DAX_TYPE(entry) == RADIX_DAX_PTE) {
+			spin_unlock_irq(&mapping->tree_lock);
+			return ERR_PTR(-EEXIST);
+		}
+	} else if (entry && new_type == RADIX_DAX_PTE) {
+		if (radix_tree_exceptional_entry(entry) &&
+		    RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD &&
+		    (unsigned long)entry & (RADIX_DAX_HZP|RADIX_DAX_EMPTY)) {
+			pmd_downgrade = true;
+		}
+	}
+
 	/* No entry for given index? Make sure radix tree is big enough. */
-	if (!entry) {
+	if (!entry || pmd_downgrade) {
 		int err;
 
 		spin_unlock_irq(&mapping->tree_lock);
@@ -418,15 +421,29 @@ restart:
 				mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM);
 		if (err)
 			return ERR_PTR(err);
-		entry = (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
-			       RADIX_DAX_ENTRY_LOCK);
+
+		if (pmd_downgrade && ((unsigned long)entry & RADIX_DAX_HZP))
+			unmap_mapping_range(mapping,
+				(index << PAGE_SHIFT) & PMD_MASK, PMD_SIZE, 0);
+
 		spin_lock_irq(&mapping->tree_lock);
-		err = radix_tree_insert(&mapping->page_tree, index, entry);
+
+		if (pmd_downgrade) {
+			radix_tree_delete(&mapping->page_tree, index);
+			mapping->nrexceptional--;
+			dax_wake_mapping_entry_waiter(entry, mapping, index,
+					false);
+		}
+
+		entry = RADIX_DAX_EMPTY_ENTRY(new_type);
+
+		err = __radix_tree_insert(&mapping->page_tree, index,
+				RADIX_DAX_ORDER(new_type), entry);
 		radix_tree_preload_end();
 		if (err) {
 			spin_unlock_irq(&mapping->tree_lock);
 			/* Someone already created the entry? */
-			if (err == -EEXIST)
+			if (err == -EEXIST && new_type == RADIX_DAX_PTE)
 				goto restart;
 			return ERR_PTR(err);
 		}
@@ -595,15 +612,15 @@ static int copy_user_bh(struct page *to, struct inode *inode,
 	return 0;
 }
 
-#define DAX_PMD_INDEX(page_index) (page_index & (PMD_MASK >> PAGE_SHIFT))
-
 static void *dax_insert_mapping_entry(struct address_space *mapping,
 				      struct vm_fault *vmf,
-				      void *entry, sector_t sector)
+				      void *entry, sector_t sector,
+				      unsigned long new_type, bool hzp)
 {
 	struct radix_tree_root *page_tree = &mapping->page_tree;
 	int error = 0;
 	bool hole_fill = false;
+	bool hzp_fill = false;
 	void *new_entry;
 	pgoff_t index = vmf->pgoff;
 
@@ -622,22 +639,30 @@ static void *dax_insert_mapping_entry(struct address_space *mapping,
 		error = radix_tree_preload(vmf->gfp_mask & ~__GFP_HIGHMEM);
 		if (error)
 			return ERR_PTR(error);
+	} else if ((unsigned long)entry & RADIX_DAX_HZP && !hzp) {
+		hzp_fill = true;
+		unmap_mapping_range(mapping,
+			(vmf->pgoff << PAGE_SHIFT) & PMD_MASK, PMD_SIZE, 0);
 	}
 
 	spin_lock_irq(&mapping->tree_lock);
-	new_entry = (void *)((unsigned long)RADIX_DAX_ENTRY(sector, false) |
-		       RADIX_DAX_ENTRY_LOCK);
+	if (hzp)
+		new_entry = RADIX_DAX_HZP_ENTRY();
+	else
+		new_entry = RADIX_DAX_ENTRY(sector, new_type);
+
 	if (hole_fill) {
 		__delete_from_page_cache(entry, NULL);
 		/* Drop pagecache reference */
 		put_page(entry);
-		error = radix_tree_insert(page_tree, index, new_entry);
+		error = __radix_tree_insert(page_tree, index,
+				RADIX_DAX_ORDER(new_type), new_entry);
 		if (error) {
 			new_entry = ERR_PTR(error);
 			goto unlock;
 		}
 		mapping->nrexceptional++;
-	} else {
+	} else if ((unsigned long)entry & (RADIX_DAX_HZP|RADIX_DAX_EMPTY)) {
 		void **slot;
 		void *ret;
 
@@ -693,6 +718,18 @@ static int dax_writeback_one(struct block_device *bdev,
 		goto unlock;
 	}
 
+	if (WARN_ON_ONCE((unsigned long)entry & RADIX_DAX_EMPTY)) {
+		ret = -EIO;
+		goto unlock;
+	}
+
+	/*
+	 * Even if dax_writeback_mapping_range() was given a wbc->range_start
+	 * in the middle of a PMD, the 'index' we are given will be aligned to
+	 * the start index of the PMD, as will the sector we pull from
+	 * 'entry'.  This allows us to flush for PMD_SIZE and not have to
+	 * worry about partial PMD writebacks.
+	 */
 	dax.sector = RADIX_DAX_SECTOR(entry);
 	dax.size = (type == RADIX_DAX_PMD ? PMD_SIZE : PAGE_SIZE);
 	spin_unlock_irq(&mapping->tree_lock);
@@ -733,12 +770,11 @@ int dax_writeback_mapping_range(struct address_space *mapping,
 		struct block_device *bdev, struct writeback_control *wbc)
 {
 	struct inode *inode = mapping->host;
-	pgoff_t start_index, end_index, pmd_index;
+	pgoff_t start_index, end_index;
 	pgoff_t indices[PAGEVEC_SIZE];
 	struct pagevec pvec;
 	bool done = false;
 	int i, ret = 0;
-	void *entry;
 
 	if (WARN_ON_ONCE(inode->i_blkbits != PAGE_SHIFT))
 		return -EIO;
@@ -748,15 +784,6 @@ int dax_writeback_mapping_range(struct address_space *mapping,
 
 	start_index = wbc->range_start >> PAGE_SHIFT;
 	end_index = wbc->range_end >> PAGE_SHIFT;
-	pmd_index = DAX_PMD_INDEX(start_index);
-
-	rcu_read_lock();
-	entry = radix_tree_lookup(&mapping->page_tree, pmd_index);
-	rcu_read_unlock();
-
-	/* see if the start of our range is covered by a PMD entry */
-	if (entry && RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD)
-		start_index = pmd_index;
 
 	tag_pages_for_writeback(mapping, start_index, end_index);
 
@@ -802,7 +829,8 @@ static int dax_insert_mapping(struct address_space *mapping,
 		return PTR_ERR(dax.addr);
 	dax_unmap_atomic(bdev, &dax);
 
-	ret = dax_insert_mapping_entry(mapping, vmf, entry, dax.sector);
+	ret = dax_insert_mapping_entry(mapping, vmf, entry, dax.sector,
+			RADIX_DAX_PTE, false);
 	if (IS_ERR(ret))
 		return PTR_ERR(ret);
 	*entryp = ret;
@@ -849,7 +877,7 @@ int dax_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
 	bh.b_bdev = inode->i_sb->s_bdev;
 	bh.b_size = PAGE_SIZE;
 
-	entry = grab_mapping_entry(mapping, vmf->pgoff);
+	entry = grab_mapping_entry(mapping, vmf->pgoff, RADIX_DAX_PTE);
 	if (IS_ERR(entry)) {
 		error = PTR_ERR(entry);
 		goto out;
@@ -953,9 +981,11 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 	bool write = flags & FAULT_FLAG_WRITE;
 	struct block_device *bdev;
 	pgoff_t size, pgoff;
+	struct vm_fault vmf;
 	sector_t block;
 	int result = 0;
-	bool alloc = false;
+	void *entry, *ret;
+
 
 	/* dax pmd mappings require pfn_t_devmap() */
 	if (!IS_ENABLED(CONFIG_FS_DAX_PMD))
@@ -977,6 +1007,11 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 		return VM_FAULT_FALLBACK;
 	}
 
+	/*
+	 * Check whether offset isn't beyond end of file now. Caller is supposed
+	 * to hold locks serializing us with truncate / punch hole so this is
+	 * a reliable test.
+	 */
 	pgoff = linear_page_index(vma, pmd_addr);
 	size = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	if (pgoff >= size)
@@ -994,37 +1029,45 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 
 	bh.b_size = PMD_SIZE;
 
-	if (get_block(inode, block, &bh, 0) != 0)
-		return VM_FAULT_SIGBUS;
+	/*
+	 * grab_mapping_entry() will make sure we get a 2M empty entry, a DAX
+	 * PMD or a HZP entry.  If it can't (because a 4k page is already in
+	 * the tree, for instance), it will return -EEXIST and we just fall
+	 * back to 4k entries.
+	 */
+	entry = grab_mapping_entry(mapping, pgoff, RADIX_DAX_PMD);
+	if (IS_ERR(entry))
+		return VM_FAULT_FALLBACK;
+
+	if (get_block(inode, block, &bh, 0) != 0) {
+		result = VM_FAULT_SIGBUS;
+		goto unlock_entry;
+	}
 
 	if (!buffer_mapped(&bh) && write) {
-		if (get_block(inode, block, &bh, 1) != 0)
-			return VM_FAULT_SIGBUS;
-		alloc = true;
-		WARN_ON_ONCE(buffer_unwritten(&bh) || buffer_new(&bh));
+		if (get_block(inode, block, &bh, 1) != 0) {
+			result = VM_FAULT_SIGBUS;
+			goto unlock_entry;
+		}
 	}
 
+	/* Filesystem should not return unwritten buffers to us! */
+	WARN_ON_ONCE(buffer_unwritten(&bh) || buffer_new(&bh));
+
 	bdev = bh.b_bdev;
 
 	if (bh.b_size < PMD_SIZE) {
 		dax_pmd_dbg(&bh, address, "allocated block too small");
-		return VM_FAULT_FALLBACK;
+		goto fallback;
 	}
 
-	/*
-	 * If we allocated new storage, make sure no process has any
-	 * zero pages covering this hole
-	 */
-	if (alloc) {
-		loff_t lstart = pgoff << PAGE_SHIFT;
-		loff_t lend = lstart + PMD_SIZE - 1; /* inclusive */
-
-		truncate_pagecache_range(inode, lstart, lend);
-	}
+	vmf.pgoff = pgoff;
+	vmf.flags = flags;
+	vmf.gfp_mask = mapping_gfp_mask(mapping) | __GFP_FS | __GFP_IO;
 
 	if (!write && !buffer_mapped(&bh)) {
 		spinlock_t *ptl;
-		pmd_t entry;
+		pmd_t pmd_entry;
 		struct page *zero_page = get_huge_zero_page();
 
 		if (unlikely(!zero_page)) {
@@ -1032,6 +1075,15 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 			goto fallback;
 		}
 
+		ret = dax_insert_mapping_entry(mapping, &vmf, entry,
+				0, RADIX_DAX_PMD, true);
+		if (IS_ERR(ret)) {
+			dax_pmd_dbg(&bh, address,
+					"PMD radix insertion failed");
+			goto fallback;
+		}
+		entry = ret;
+
 		ptl = pmd_lock(vma->vm_mm, pmd);
 		if (!pmd_none(*pmd)) {
 			spin_unlock(ptl);
@@ -1044,9 +1096,9 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 				__func__, current->comm, address,
 				(unsigned long long) to_sector(&bh, inode));
 
-		entry = mk_pmd(zero_page, vma->vm_page_prot);
-		entry = pmd_mkhuge(entry);
-		set_pmd_at(vma->vm_mm, pmd_addr, pmd, entry);
+		pmd_entry = mk_pmd(zero_page, vma->vm_page_prot);
+		pmd_entry = pmd_mkhuge(pmd_entry);
+		set_pmd_at(vma->vm_mm, pmd_addr, pmd, pmd_entry);
 		result = VM_FAULT_NOPAGE;
 		spin_unlock(ptl);
 	} else {
@@ -1078,27 +1130,14 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 		}
 		dax_unmap_atomic(bdev, &dax);
 
-		/*
-		 * For PTE faults we insert a radix tree entry for reads, and
-		 * leave it clean.  Then on the first write we dirty the radix
-		 * tree entry via the dax_pfn_mkwrite() path.  This sequence
-		 * allows the dax_pfn_mkwrite() call to be simpler and avoid a
-		 * call into get_block() to translate the pgoff to a sector in
-		 * order to be able to create a new radix tree entry.
-		 *
-		 * The PMD path doesn't have an equivalent to
-		 * dax_pfn_mkwrite(), though, so for a read followed by a
-		 * write we traverse all the way through dax_pmd_fault()
-		 * twice.  This means we can just skip inserting a radix tree
-		 * entry completely on the initial read and just wait until
-		 * the write to insert a dirty entry.
-		 */
-		if (write) {
-			/*
-			 * We should insert radix-tree entry and dirty it here.
-			 * For now this is broken...
-			 */
+		ret = dax_insert_mapping_entry(mapping, &vmf, entry,
+				dax.sector, RADIX_DAX_PMD, false);
+		if (IS_ERR(ret)) {
+			dax_pmd_dbg(&bh, address,
+					"PMD radix insertion failed");
+			goto fallback;
 		}
+		entry = ret;
 
 		dev_dbg(part_to_dev(bdev->bd_part),
 				"%s: %s addr: %lx pfn: %lx sect: %llx\n",
@@ -1109,13 +1148,14 @@ int dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 				dax.pfn, write);
 	}
 
- out:
+ unlock_entry:
+	put_locked_mapping_entry(mapping, pgoff, entry);
 	return result;
 
  fallback:
 	count_vm_event(THP_FAULT_FALLBACK);
 	result = VM_FAULT_FALLBACK;
-	goto out;
+	goto unlock_entry;
 }
 EXPORT_SYMBOL_GPL(dax_pmd_fault);
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git a/include/linux/dax.h b/include/linux/dax.h
index f6cab31..bdf6064 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -6,8 +6,33 @@
 #include <linux/radix-tree.h>
 #include <asm/pgtable.h>
 
-/* We use lowest available exceptional entry bit for locking */
+/*
+ * We use lowest available bit in exceptional entry for locking, two bits for
+ * the entry type (PMD & PTE), and two more for flags (HZP and empty).  In
+ * total five special bits.
+ */
+#define RADIX_DAX_SHIFT	(RADIX_TREE_EXCEPTIONAL_SHIFT + 5)
 #define RADIX_DAX_ENTRY_LOCK (1 << RADIX_TREE_EXCEPTIONAL_SHIFT)
+/* PTE and PMD types */
+#define RADIX_DAX_PTE (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 1))
+#define RADIX_DAX_PMD (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 2))
+/* huge zero page and empty entry flags */
+#define RADIX_DAX_HZP (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 3))
+#define RADIX_DAX_EMPTY (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 4))
+
+#define RADIX_DAX_TYPE_MASK (RADIX_DAX_PTE | RADIX_DAX_PMD)
+#define RADIX_DAX_TYPE(entry) ((unsigned long)entry & RADIX_DAX_TYPE_MASK)
+#define RADIX_DAX_SECTOR(entry) (((unsigned long)entry >> RADIX_DAX_SHIFT))
+
+/* entries begin locked */
+#define RADIX_DAX_ENTRY(sector, type) ((void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |\
+	type | (unsigned long)sector << RADIX_DAX_SHIFT | RADIX_DAX_ENTRY_LOCK))
+#define RADIX_DAX_HZP_ENTRY() ((void *)(RADIX_TREE_EXCEPTIONAL_ENTRY | \
+	RADIX_DAX_PMD | RADIX_DAX_HZP | RADIX_DAX_EMPTY | RADIX_DAX_ENTRY_LOCK))
+#define RADIX_DAX_EMPTY_ENTRY(type) ((void *)(RADIX_TREE_EXCEPTIONAL_ENTRY | \
+		type | RADIX_DAX_EMPTY | RADIX_DAX_ENTRY_LOCK))
+
+#define RADIX_DAX_ORDER(type) (type == RADIX_DAX_PMD ? PMD_SHIFT-PAGE_SHIFT : 0)
 
 ssize_t dax_do_io(struct kiocb *, struct inode *, struct iov_iter *,
 		  get_block_t, dio_iodone_t, int flags);
diff --git a/mm/filemap.c b/mm/filemap.c
index 35e880d..d9dd97e 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -610,9 +610,7 @@ static int page_cache_tree_insert(struct address_space *mapping,
 				workingset_node_shadows_dec(node);
 		} else {
 			/* DAX can replace empty locked entry with a hole */
-			WARN_ON_ONCE(p !=
-				(void *)(RADIX_TREE_EXCEPTIONAL_ENTRY |
-					 RADIX_DAX_ENTRY_LOCK));
+			WARN_ON_ONCE(p != RADIX_DAX_EMPTY_ENTRY(RADIX_DAX_PTE));
 			/* DAX accounts exceptional entries as normal pages */
 			if (node)
 				workingset_node_pages_dec(node);
-- 
2.9.0

[PATCH v2 9/9] dax: remove "depends on BROKEN" from FS_DAX_PMD

[Ross Zwisler]

Now that DAX PMD faults are once again working and are now participating in
DAX's radix tree locking scheme, allow their config option to be enabled.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/Kconfig b/fs/Kconfig
index 2bc7ad7..b6f0fce 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -55,7 +55,6 @@ config FS_DAX_PMD
 	depends on FS_DAX
 	depends on ZONE_DEVICE
 	depends on TRANSPARENT_HUGEPAGE
-	depends on BROKEN
 
 endif # BLOCK
 
-- 
2.9.0

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

[PATCH v2 9/9] dax: remove "depends on BROKEN" from FS_DAX_PMD

[Ross Zwisler]

Now that DAX PMD faults are once again working and are now participating in
DAX's radix tree locking scheme, allow their config option to be enabled.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/Kconfig b/fs/Kconfig
index 2bc7ad7..b6f0fce 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -55,7 +55,6 @@ config FS_DAX_PMD
 	depends on FS_DAX
 	depends on ZONE_DEVICE
 	depends on TRANSPARENT_HUGEPAGE
-	depends on BROKEN
 
 endif # BLOCK
 
-- 
2.9.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v2 9/9] dax: remove "depends on BROKEN" from FS_DAX_PMD

[Ross Zwisler]

Now that DAX PMD faults are once again working and are now participating in
DAX's radix tree locking scheme, allow their config option to be enabled.

Signed-off-by: Ross Zwisler <ross.zwisler-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 fs/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/Kconfig b/fs/Kconfig
index 2bc7ad7..b6f0fce 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -55,7 +55,6 @@ config FS_DAX_PMD
 	depends on FS_DAX
 	depends on ZONE_DEVICE
 	depends on TRANSPARENT_HUGEPAGE
-	depends on BROKEN
 
 endif # BLOCK
 
-- 
2.9.0

[PATCH v2 9/9] dax: remove "depends on BROKEN" from FS_DAX_PMD

[Ross Zwisler]

Now that DAX PMD faults are once again working and are now participating in
DAX's radix tree locking scheme, allow their config option to be enabled.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/Kconfig b/fs/Kconfig
index 2bc7ad7..b6f0fce 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -55,7 +55,6 @@ config FS_DAX_PMD
 	depends on FS_DAX
 	depends on ZONE_DEVICE
 	depends on TRANSPARENT_HUGEPAGE
-	depends on BROKEN
 
 endif # BLOCK
 
-- 
2.9.0

[PATCH v2 9/9] dax: remove "depends on BROKEN" from FS_DAX_PMD

[Ross Zwisler]

Now that DAX PMD faults are once again working and are now participating in
DAX's radix tree locking scheme, allow their config option to be enabled.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/Kconfig b/fs/Kconfig
index 2bc7ad7..b6f0fce 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -55,7 +55,6 @@ config FS_DAX_PMD
 	depends on FS_DAX
 	depends on ZONE_DEVICE
 	depends on TRANSPARENT_HUGEPAGE
-	depends on BROKEN
 
 endif # BLOCK
 
-- 
2.9.0

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
> locking.  This series allows DAX PMDs to participate in the DAX radix tree
> based locking scheme so that they can be re-enabled.
> 
> Changes since v1:
>  - PMD entry locking is now done based on the starting offset of the PMD
>    entry, rather than on the radix tree slot which was unreliable. (Jan)
>  - Fixed the one issue I could find with hole punch.  As far as I can tell
>    hole punch now works correctly for both PMD and PTE DAX entries, 4k zero
>    pages and huge zero pages.
>  - Fixed the way that ext2 returns the size of holes in ext2_get_block().
>    (Jan)
>  - Made the 'wait_table' global variable static in respnse to a sparse
>    warning.
>  - Fixed some more inconsitent usage between the names 'ret' and 'entry'
>    for radix tree entry variables.
> 
> Ross Zwisler (9):
>   ext4: allow DAX writeback for hole punch
>   ext2: tell DAX the size of allocation holes
>   ext4: tell DAX the size of allocation holes
>   dax: remove buffer_size_valid()
>   dax: make 'wait_table' global variable static
>   dax: consistent variable naming for DAX entries
>   dax: coordinate locking for offsets in PMD range
>   dax: re-enable DAX PMD support
>   dax: remove "depends on BROKEN" from FS_DAX_PMD
> 
>  fs/Kconfig          |   1 -
>  fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------------------
>  fs/ext2/inode.c     |   3 +
>  fs/ext4/inode.c     |   7 +-
>  include/linux/dax.h |  29 ++++-
>  mm/filemap.c        |   6 +-
>  6 files changed, 201 insertions(+), 142 deletions(-)
> 
> -- 
> 2.9.0

Ping on this series?  Any objections or comments?
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
> locking.  This series allows DAX PMDs to participate in the DAX radix tree
> based locking scheme so that they can be re-enabled.
> 
> Changes since v1:
>  - PMD entry locking is now done based on the starting offset of the PMD
>    entry, rather than on the radix tree slot which was unreliable. (Jan)
>  - Fixed the one issue I could find with hole punch.  As far as I can tell
>    hole punch now works correctly for both PMD and PTE DAX entries, 4k zero
>    pages and huge zero pages.
>  - Fixed the way that ext2 returns the size of holes in ext2_get_block().
>    (Jan)
>  - Made the 'wait_table' global variable static in respnse to a sparse
>    warning.
>  - Fixed some more inconsitent usage between the names 'ret' and 'entry'
>    for radix tree entry variables.
> 
> Ross Zwisler (9):
>   ext4: allow DAX writeback for hole punch
>   ext2: tell DAX the size of allocation holes
>   ext4: tell DAX the size of allocation holes
>   dax: remove buffer_size_valid()
>   dax: make 'wait_table' global variable static
>   dax: consistent variable naming for DAX entries
>   dax: coordinate locking for offsets in PMD range
>   dax: re-enable DAX PMD support
>   dax: remove "depends on BROKEN" from FS_DAX_PMD
> 
>  fs/Kconfig          |   1 -
>  fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------------------
>  fs/ext2/inode.c     |   3 +
>  fs/ext4/inode.c     |   7 +-
>  include/linux/dax.h |  29 ++++-
>  mm/filemap.c        |   6 +-
>  6 files changed, 201 insertions(+), 142 deletions(-)
> 
> -- 
> 2.9.0

Ping on this series?  Any objections or comments?

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
> locking.  This series allows DAX PMDs to participate in the DAX radix tree
> based locking scheme so that they can be re-enabled.
> 
> Changes since v1:
>  - PMD entry locking is now done based on the starting offset of the PMD
>    entry, rather than on the radix tree slot which was unreliable. (Jan)
>  - Fixed the one issue I could find with hole punch.  As far as I can tell
>    hole punch now works correctly for both PMD and PTE DAX entries, 4k zero
>    pages and huge zero pages.
>  - Fixed the way that ext2 returns the size of holes in ext2_get_block().
>    (Jan)
>  - Made the 'wait_table' global variable static in respnse to a sparse
>    warning.
>  - Fixed some more inconsitent usage between the names 'ret' and 'entry'
>    for radix tree entry variables.
> 
> Ross Zwisler (9):
>   ext4: allow DAX writeback for hole punch
>   ext2: tell DAX the size of allocation holes
>   ext4: tell DAX the size of allocation holes
>   dax: remove buffer_size_valid()
>   dax: make 'wait_table' global variable static
>   dax: consistent variable naming for DAX entries
>   dax: coordinate locking for offsets in PMD range
>   dax: re-enable DAX PMD support
>   dax: remove "depends on BROKEN" from FS_DAX_PMD
> 
>  fs/Kconfig          |   1 -
>  fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------------------
>  fs/ext2/inode.c     |   3 +
>  fs/ext4/inode.c     |   7 +-
>  include/linux/dax.h |  29 ++++-
>  mm/filemap.c        |   6 +-
>  6 files changed, 201 insertions(+), 142 deletions(-)
> 
> -- 
> 2.9.0

Ping on this series?  Any objections or comments?

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
> locking.  This series allows DAX PMDs to participate in the DAX radix tree
> based locking scheme so that they can be re-enabled.
> 
> Changes since v1:
>  - PMD entry locking is now done based on the starting offset of the PMD
>    entry, rather than on the radix tree slot which was unreliable. (Jan)
>  - Fixed the one issue I could find with hole punch.  As far as I can tell
>    hole punch now works correctly for both PMD and PTE DAX entries, 4k zero
>    pages and huge zero pages.
>  - Fixed the way that ext2 returns the size of holes in ext2_get_block().
>    (Jan)
>  - Made the 'wait_table' global variable static in respnse to a sparse
>    warning.
>  - Fixed some more inconsitent usage between the names 'ret' and 'entry'
>    for radix tree entry variables.
> 
> Ross Zwisler (9):
>   ext4: allow DAX writeback for hole punch
>   ext2: tell DAX the size of allocation holes
>   ext4: tell DAX the size of allocation holes
>   dax: remove buffer_size_valid()
>   dax: make 'wait_table' global variable static
>   dax: consistent variable naming for DAX entries
>   dax: coordinate locking for offsets in PMD range
>   dax: re-enable DAX PMD support
>   dax: remove "depends on BROKEN" from FS_DAX_PMD
> 
>  fs/Kconfig          |   1 -
>  fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------------------
>  fs/ext2/inode.c     |   3 +
>  fs/ext4/inode.c     |   7 +-
>  include/linux/dax.h |  29 ++++-
>  mm/filemap.c        |   6 +-
>  6 files changed, 201 insertions(+), 142 deletions(-)
> 
> -- 
> 2.9.0

Ping on this series?  Any objections or comments?

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Kani, Toshimitsu]

On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> > 
> > DAX PMDs have been disabled since Jan Kara introduced DAX radix
> > tree based locking.  This series allows DAX PMDs to participate in
> > the DAX radix tree based locking scheme so that they can be re-
> > enabled.
> > 
> > Changes since v1:
> >  - PMD entry locking is now done based on the starting offset of
> > the PMD entry, rather than on the radix tree slot which was
> > unreliable. (Jan)
> >  - Fixed the one issue I could find with hole punch.  As far as I
> > can tell hole punch now works correctly for both PMD and PTE DAX
> > entries, 4k zero pages and huge zero pages.
> >  - Fixed the way that ext2 returns the size of holes in
> > ext2_get_block(). (Jan)
> >  - Made the 'wait_table' global variable static in respnse to a
> > sparse warning.
> >  - Fixed some more inconsitent usage between the names 'ret' and
> > 'entry' for radix tree entry variables.
> > 
> > Ross Zwisler (9):
> >   ext4: allow DAX writeback for hole punch
> >   ext2: tell DAX the size of allocation holes
> >   ext4: tell DAX the size of allocation holes
> >   dax: remove buffer_size_valid()
> >   dax: make 'wait_table' global variable static
> >   dax: consistent variable naming for DAX entries
> >   dax: coordinate locking for offsets in PMD range
> >   dax: re-enable DAX PMD support
> >   dax: remove "depends on BROKEN" from FS_DAX_PMD
> > 
> >  fs/Kconfig          |   1 -
> >  fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------
> > ------------
> >  fs/ext2/inode.c     |   3 +
> >  fs/ext4/inode.c     |   7 +-
> >  include/linux/dax.h |  29 ++++-
> >  mm/filemap.c        |   6 +-
> >  6 files changed, 201 insertions(+), 142 deletions(-)
> > 
> > -- 
> > 2.9.0
> 
> Ping on this series?  Any objections or comments?

Hi Ross,

I am seeing a major performance loss in fio mmap test with this patch-
set applied.  This happens with or without my patches [1] applied on
top of yours.  Without my patches, dax_pmd_fault() falls back to the
pte handler since an mmap'ed address is not 2MB-aligned.

I have attached three test results.
 o rc4.log - 4.8.0-rc4 (base)
 o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
 o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)

My test steps are as follows.

mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
mount -o dax /dev/pmem0 /mnt/pmem0
numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio test.fio

"test.fio"
---
[global]
bs=4k
size=2G
directory=/mnt/pmem0
ioengine=mmap
[randrw]
rw=randrw
---

Can you please take a look?
Thanks,
-Toshi

[1] https://lkml.org/lkml/2016/8/29/560




_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Kani, Toshimitsu]

[-- Attachment #1: Type: text/plain, Size: 2878 bytes --]

On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> > 
> > DAX PMDs have been disabled since Jan Kara introduced DAX radix
> > tree based locking.  This series allows DAX PMDs to participate in
> > the DAX radix tree based locking scheme so that they can be re-
> > enabled.
> > 
> > Changes since v1:
> >  - PMD entry locking is now done based on the starting offset of
> > the PMD entry, rather than on the radix tree slot which was
> > unreliable. (Jan)
> >  - Fixed the one issue I could find with hole punch.  As far as I
> > can tell hole punch now works correctly for both PMD and PTE DAX
> > entries, 4k zero pages and huge zero pages.
> >  - Fixed the way that ext2 returns the size of holes in
> > ext2_get_block(). (Jan)
> >  - Made the 'wait_table' global variable static in respnse to a
> > sparse warning.
> >  - Fixed some more inconsitent usage between the names 'ret' and
> > 'entry' for radix tree entry variables.
> > 
> > Ross Zwisler (9):
> >   ext4: allow DAX writeback for hole punch
> >   ext2: tell DAX the size of allocation holes
> >   ext4: tell DAX the size of allocation holes
> >   dax: remove buffer_size_valid()
> >   dax: make 'wait_table' global variable static
> >   dax: consistent variable naming for DAX entries
> >   dax: coordinate locking for offsets in PMD range
> >   dax: re-enable DAX PMD support
> >   dax: remove "depends on BROKEN" from FS_DAX_PMD
> > 
> >  fs/Kconfig          |   1 -
> >  fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------
> > ------------
> >  fs/ext2/inode.c     |   3 +
> >  fs/ext4/inode.c     |   7 +-
> >  include/linux/dax.h |  29 ++++-
> >  mm/filemap.c        |   6 +-
> >  6 files changed, 201 insertions(+), 142 deletions(-)
> > 
> > -- 
> > 2.9.0
> 
> Ping on this series?  Any objections or comments?

Hi Ross,

I am seeing a major performance loss in fio mmap test with this patch-
set applied.  This happens with or without my patches [1] applied on
top of yours.  Without my patches, dax_pmd_fault() falls back to the
pte handler since an mmap'ed address is not 2MB-aligned.

I have attached three test results.
 o rc4.log - 4.8.0-rc4 (base)
 o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
 o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)

My test steps are as follows.

mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
mount -o dax /dev/pmem0 /mnt/pmem0
numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio test.fio

"test.fio"
---
[global]
bs=4k
size=2G
directory=/mnt/pmem0
ioengine=mmap
[randrw]
rw=randrw
---

Can you please take a look?
Thanks,
-Toshi

[1] https://lkml.org/lkml/2016/8/29/560





[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: non-pmd.log --]
[-- Type: text/x-log; name="non-pmd.log", Size: 2306 bytes --]

randrw: (g=0): rw=randrw, bs=4K-4K/4K-4K/4K-4K, ioengine=mmap, iodepth=1
fio-2.6
Starting 1 process
randrw: Laying out IO file(s) (1 file(s) / 2048MB)

randrw: (groupid=0, jobs=1): err= 0: pid=12656: Wed Aug 31 18:14:06 2016
  read : io=1024.7MB, bw=3076.4KB/s, iops=769, runt=341062msec
    clat (usec): min=415, max=1703, avg=509.78, stdev=37.40
     lat (usec): min=415, max=1703, avg=509.81, stdev=37.40
    clat percentiles (usec):
     |  1.00th=[  482],  5.00th=[  498], 10.00th=[  498], 20.00th=[  498],
     | 30.00th=[  502], 40.00th=[  502], 50.00th=[  502], 60.00th=[  502],
     | 70.00th=[  502], 80.00th=[  506], 90.00th=[  524], 95.00th=[  540],
     | 99.00th=[  724], 99.50th=[  732], 99.90th=[  748], 99.95th=[  860],
     | 99.99th=[  900]
    bw (KB  /s): min= 2688, max= 3552, per=100.00%, avg=3078.69, stdev=143.84
  write: io=1023.4MB, bw=3072.6KB/s, iops=768, runt=341062msec
    clat (usec): min=683, max=1955, avg=788.99, stdev=45.83
     lat (usec): min=683, max=1955, avg=789.04, stdev=45.84
    clat percentiles (usec):
     |  1.00th=[  756],  5.00th=[  772], 10.00th=[  772], 20.00th=[  772],
     | 30.00th=[  772], 40.00th=[  780], 50.00th=[  780], 60.00th=[  780],
     | 70.00th=[  780], 80.00th=[  788], 90.00th=[  812], 95.00th=[  828],
     | 99.00th=[ 1004], 99.50th=[ 1012], 99.90th=[ 1128], 99.95th=[ 1144],
     | 99.99th=[ 1208]
    bw (KB  /s): min= 2752, max= 3552, per=100.00%, avg=3074.60, stdev=96.62
    lat (usec) : 500=12.55%, 750=37.73%, 1000=48.96%
    lat (msec) : 2=0.76%
  cpu          : usr=99.96%, sys=0.01%, ctx=32870, majf=0, minf=3014
  IO depths    : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     issued    : total=r=262309/w=261979/d=0, short=r=0/w=0/d=0, drop=r=0/w=0/d=0
     latency   : target=0, window=0, percentile=100.00%, depth=1

Run status group 0 (all jobs):
   READ: io=1024.7MB, aggrb=3076KB/s, minb=3076KB/s, maxb=3076KB/s, mint=341062msec, maxt=341062msec
  WRITE: io=1023.4MB, aggrb=3072KB/s, minb=3072KB/s, maxb=3072KB/s, mint=341062msec, maxt=341062msec

Disk stats (read/write):
  pmem0: ios=0/0, merge=0/0, ticks=0/0, in_queue=0, util=0.00%

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: pmd.log --]
[-- Type: text/x-log; name="pmd.log", Size: 2306 bytes --]

randrw: (g=0): rw=randrw, bs=4K-4K/4K-4K/4K-4K, ioengine=mmap, iodepth=1
fio-2.6
Starting 1 process
randrw: Laying out IO file(s) (1 file(s) / 2048MB)

randrw: (groupid=0, jobs=1): err= 0: pid=19521: Wed Aug 31 17:50:39 2016
  read : io=1024.7MB, bw=3034.5KB/s, iops=758, runt=345780msec
    clat (usec): min=492, max=1359, avg=517.20, stdev=55.87
     lat (usec): min=492, max=1359, avg=517.23, stdev=55.87
    clat percentiles (usec):
     |  1.00th=[  498],  5.00th=[  498], 10.00th=[  498], 20.00th=[  498],
     | 30.00th=[  502], 40.00th=[  502], 50.00th=[  502], 60.00th=[  502],
     | 70.00th=[  502], 80.00th=[  506], 90.00th=[  524], 95.00th=[  708],
     | 99.00th=[  740], 99.50th=[  756], 99.90th=[  900], 99.95th=[  908],
     | 99.99th=[ 1048]
    bw (KB  /s): min= 2600, max= 3448, per=100.00%, avg=3036.52, stdev=141.59
  write: io=1023.4MB, bw=3030.6KB/s, iops=757, runt=345780msec
    clat (usec): min=765, max=1788, avg=799.46, stdev=67.19
     lat (usec): min=766, max=1788, avg=799.50, stdev=67.20
    clat percentiles (usec):
     |  1.00th=[  772],  5.00th=[  772], 10.00th=[  772], 20.00th=[  772],
     | 30.00th=[  772], 40.00th=[  780], 50.00th=[  780], 60.00th=[  780],
     | 70.00th=[  780], 80.00th=[  788], 90.00th=[  820], 95.00th=[  996],
     | 99.00th=[ 1020], 99.50th=[ 1144], 99.90th=[ 1176], 99.95th=[ 1208],
     | 99.99th=[ 1320]
    bw (KB  /s): min= 2704, max= 3328, per=100.00%, avg=3032.56, stdev=93.00
    lat (usec) : 500=10.66%, 750=39.06%, 1000=48.19%
    lat (msec) : 2=2.08%
  cpu          : usr=99.96%, sys=0.00%, ctx=32513, majf=0, minf=3012
  IO depths    : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     issued    : total=r=262309/w=261979/d=0, short=r=0/w=0/d=0, drop=r=0/w=0/d=0
     latency   : target=0, window=0, percentile=100.00%, depth=1

Run status group 0 (all jobs):
   READ: io=1024.7MB, aggrb=3034KB/s, minb=3034KB/s, maxb=3034KB/s, mint=345780msec, maxt=345780msec
  WRITE: io=1023.4MB, aggrb=3030KB/s, minb=3030KB/s, maxb=3030KB/s, mint=345780msec, maxt=345780msec

Disk stats (read/write):
  pmem0: ios=0/0, merge=0/0, ticks=0/0, in_queue=0, util=0.00%

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #4: rc4.log --]
[-- Type: text/x-log; name="rc4.log", Size: 2338 bytes --]

randrw: (g=0): rw=randrw, bs=4K-4K/4K-4K/4K-4K, ioengine=mmap, iodepth=1
fio-2.6
Starting 1 process
randrw: Laying out IO file(s) (1 file(s) / 2048MB)

randrw: (groupid=0, jobs=1): err= 0: pid=12678: Wed Aug 31 19:59:45 2016
  read : io=1024.7MB, bw=775489KB/s, iops=193872, runt=  1353msec
    clat (usec): min=1, max=297, avg= 1.67, stdev= 2.92
     lat (usec): min=1, max=297, avg= 1.70, stdev= 2.96
    clat percentiles (usec):
     |  1.00th=[    1],  5.00th=[    1], 10.00th=[    1], 20.00th=[    1],
     | 30.00th=[    1], 40.00th=[    1], 50.00th=[    2], 60.00th=[    2],
     | 70.00th=[    2], 80.00th=[    2], 90.00th=[    2], 95.00th=[    2],
     | 99.00th=[    3], 99.50th=[    4], 99.90th=[   12], 99.95th=[   12],
     | 99.99th=[  189]
    bw (KB  /s): min=736608, max=792296, per=98.58%, avg=764452.00, stdev=39377.36
  write: io=1023.4MB, bw=774513KB/s, iops=193628, runt=  1353msec
    clat (usec): min=2, max=235, avg= 2.66, stdev= 3.59
     lat (usec): min=2, max=235, avg= 2.70, stdev= 3.61
    clat percentiles (usec):
     |  1.00th=[    2],  5.00th=[    2], 10.00th=[    2], 20.00th=[    2],
     | 30.00th=[    2], 40.00th=[    2], 50.00th=[    3], 60.00th=[    3],
     | 70.00th=[    3], 80.00th=[    3], 90.00th=[    3], 95.00th=[    3],
     | 99.00th=[    4], 99.50th=[    6], 99.90th=[   13], 99.95th=[   14],
     | 99.99th=[  193]
    bw (KB  /s): min=736288, max=789440, per=98.50%, avg=762864.00, stdev=37584.14
    lat (usec) : 2=20.18%, 4=78.23%, 10=1.40%, 20=0.16%, 50=0.01%
    lat (usec) : 250=0.03%, 500=0.01%
  cpu          : usr=46.82%, sys=53.03%, ctx=135, majf=0, minf=786279
  IO depths    : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     issued    : total=r=262309/w=261979/d=0, short=r=0/w=0/d=0, drop=r=0/w=0/d=0
     latency   : target=0, window=0, percentile=100.00%, depth=1

Run status group 0 (all jobs):
   READ: io=1024.7MB, aggrb=775488KB/s, minb=775488KB/s, maxb=775488KB/s, mint=1353msec, maxt=1353msec
  WRITE: io=1023.4MB, aggrb=774512KB/s, minb=774512KB/s, maxb=774512KB/s, mint=1353msec, maxt=1353msec

Disk stats (read/write):
  pmem0: ios=0/0, merge=0/0, ticks=0/0, in_queue=0, util=0.00%

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Kani, Toshimitsu]

[-- Attachment #1: Type: text/plain, Size: 2878 bytes --]

On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> > 
> > DAX PMDs have been disabled since Jan Kara introduced DAX radix
> > tree based locking.  This series allows DAX PMDs to participate in
> > the DAX radix tree based locking scheme so that they can be re-
> > enabled.
> > 
> > Changes since v1:
> >  - PMD entry locking is now done based on the starting offset of
> > the PMD entry, rather than on the radix tree slot which was
> > unreliable. (Jan)
> >  - Fixed the one issue I could find with hole punch.  As far as I
> > can tell hole punch now works correctly for both PMD and PTE DAX
> > entries, 4k zero pages and huge zero pages.
> >  - Fixed the way that ext2 returns the size of holes in
> > ext2_get_block(). (Jan)
> >  - Made the 'wait_table' global variable static in respnse to a
> > sparse warning.
> >  - Fixed some more inconsitent usage between the names 'ret' and
> > 'entry' for radix tree entry variables.
> > 
> > Ross Zwisler (9):
> >   ext4: allow DAX writeback for hole punch
> >   ext2: tell DAX the size of allocation holes
> >   ext4: tell DAX the size of allocation holes
> >   dax: remove buffer_size_valid()
> >   dax: make 'wait_table' global variable static
> >   dax: consistent variable naming for DAX entries
> >   dax: coordinate locking for offsets in PMD range
> >   dax: re-enable DAX PMD support
> >   dax: remove "depends on BROKEN" from FS_DAX_PMD
> > 
> >  fs/Kconfig          |   1 -
> >  fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------
> > ------------
> >  fs/ext2/inode.c     |   3 +
> >  fs/ext4/inode.c     |   7 +-
> >  include/linux/dax.h |  29 ++++-
> >  mm/filemap.c        |   6 +-
> >  6 files changed, 201 insertions(+), 142 deletions(-)
> > 
> > -- 
> > 2.9.0
> 
> Ping on this series?  Any objections or comments?

Hi Ross,

I am seeing a major performance loss in fio mmap test with this patch-
set applied.  This happens with or without my patches [1] applied on
top of yours.  Without my patches, dax_pmd_fault() falls back to the
pte handler since an mmap'ed address is not 2MB-aligned.

I have attached three test results.
 o rc4.log - 4.8.0-rc4 (base)
 o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
 o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)

My test steps are as follows.

mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
mount -o dax /dev/pmem0 /mnt/pmem0
numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio test.fio

"test.fio"
---
[global]
bs=4k
size=2G
directory=/mnt/pmem0
ioengine=mmap
[randrw]
rw=randrw
---

Can you please take a look?
Thanks,
-Toshi

[1] https://lkml.org/lkml/2016/8/29/560





[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: non-pmd.log --]
[-- Type: text/x-log; name="non-pmd.log", Size: 2306 bytes --]

randrw: (g=0): rw=randrw, bs=4K-4K/4K-4K/4K-4K, ioengine=mmap, iodepth=1
fio-2.6
Starting 1 process
randrw: Laying out IO file(s) (1 file(s) / 2048MB)

randrw: (groupid=0, jobs=1): err= 0: pid=12656: Wed Aug 31 18:14:06 2016
  read : io=1024.7MB, bw=3076.4KB/s, iops=769, runt=341062msec
    clat (usec): min=415, max=1703, avg=509.78, stdev=37.40
     lat (usec): min=415, max=1703, avg=509.81, stdev=37.40
    clat percentiles (usec):
     |  1.00th=[  482],  5.00th=[  498], 10.00th=[  498], 20.00th=[  498],
     | 30.00th=[  502], 40.00th=[  502], 50.00th=[  502], 60.00th=[  502],
     | 70.00th=[  502], 80.00th=[  506], 90.00th=[  524], 95.00th=[  540],
     | 99.00th=[  724], 99.50th=[  732], 99.90th=[  748], 99.95th=[  860],
     | 99.99th=[  900]
    bw (KB  /s): min= 2688, max= 3552, per=100.00%, avg=3078.69, stdev=143.84
  write: io=1023.4MB, bw=3072.6KB/s, iops=768, runt=341062msec
    clat (usec): min=683, max=1955, avg=788.99, stdev=45.83
     lat (usec): min=683, max=1955, avg=789.04, stdev=45.84
    clat percentiles (usec):
     |  1.00th=[  756],  5.00th=[  772], 10.00th=[  772], 20.00th=[  772],
     | 30.00th=[  772], 40.00th=[  780], 50.00th=[  780], 60.00th=[  780],
     | 70.00th=[  780], 80.00th=[  788], 90.00th=[  812], 95.00th=[  828],
     | 99.00th=[ 1004], 99.50th=[ 1012], 99.90th=[ 1128], 99.95th=[ 1144],
     | 99.99th=[ 1208]
    bw (KB  /s): min= 2752, max= 3552, per=100.00%, avg=3074.60, stdev=96.62
    lat (usec) : 500=12.55%, 750=37.73%, 1000=48.96%
    lat (msec) : 2=0.76%
  cpu          : usr=99.96%, sys=0.01%, ctx=32870, majf=0, minf=3014
  IO depths    : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     issued    : total=r=262309/w=261979/d=0, short=r=0/w=0/d=0, drop=r=0/w=0/d=0
     latency   : target=0, window=0, percentile=100.00%, depth=1

Run status group 0 (all jobs):
   READ: io=1024.7MB, aggrb=3076KB/s, minb=3076KB/s, maxb=3076KB/s, mint=341062msec, maxt=341062msec
  WRITE: io=1023.4MB, aggrb=3072KB/s, minb=3072KB/s, maxb=3072KB/s, mint=341062msec, maxt=341062msec

Disk stats (read/write):
  pmem0: ios=0/0, merge=0/0, ticks=0/0, in_queue=0, util=0.00%

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: pmd.log --]
[-- Type: text/x-log; name="pmd.log", Size: 2306 bytes --]

randrw: (g=0): rw=randrw, bs=4K-4K/4K-4K/4K-4K, ioengine=mmap, iodepth=1
fio-2.6
Starting 1 process
randrw: Laying out IO file(s) (1 file(s) / 2048MB)

randrw: (groupid=0, jobs=1): err= 0: pid=19521: Wed Aug 31 17:50:39 2016
  read : io=1024.7MB, bw=3034.5KB/s, iops=758, runt=345780msec
    clat (usec): min=492, max=1359, avg=517.20, stdev=55.87
     lat (usec): min=492, max=1359, avg=517.23, stdev=55.87
    clat percentiles (usec):
     |  1.00th=[  498],  5.00th=[  498], 10.00th=[  498], 20.00th=[  498],
     | 30.00th=[  502], 40.00th=[  502], 50.00th=[  502], 60.00th=[  502],
     | 70.00th=[  502], 80.00th=[  506], 90.00th=[  524], 95.00th=[  708],
     | 99.00th=[  740], 99.50th=[  756], 99.90th=[  900], 99.95th=[  908],
     | 99.99th=[ 1048]
    bw (KB  /s): min= 2600, max= 3448, per=100.00%, avg=3036.52, stdev=141.59
  write: io=1023.4MB, bw=3030.6KB/s, iops=757, runt=345780msec
    clat (usec): min=765, max=1788, avg=799.46, stdev=67.19
     lat (usec): min=766, max=1788, avg=799.50, stdev=67.20
    clat percentiles (usec):
     |  1.00th=[  772],  5.00th=[  772], 10.00th=[  772], 20.00th=[  772],
     | 30.00th=[  772], 40.00th=[  780], 50.00th=[  780], 60.00th=[  780],
     | 70.00th=[  780], 80.00th=[  788], 90.00th=[  820], 95.00th=[  996],
     | 99.00th=[ 1020], 99.50th=[ 1144], 99.90th=[ 1176], 99.95th=[ 1208],
     | 99.99th=[ 1320]
    bw (KB  /s): min= 2704, max= 3328, per=100.00%, avg=3032.56, stdev=93.00
    lat (usec) : 500=10.66%, 750=39.06%, 1000=48.19%
    lat (msec) : 2=2.08%
  cpu          : usr=99.96%, sys=0.00%, ctx=32513, majf=0, minf=3012
  IO depths    : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     issued    : total=r=262309/w=261979/d=0, short=r=0/w=0/d=0, drop=r=0/w=0/d=0
     latency   : target=0, window=0, percentile=100.00%, depth=1

Run status group 0 (all jobs):
   READ: io=1024.7MB, aggrb=3034KB/s, minb=3034KB/s, maxb=3034KB/s, mint=345780msec, maxt=345780msec
  WRITE: io=1023.4MB, aggrb=3030KB/s, minb=3030KB/s, maxb=3030KB/s, mint=345780msec, maxt=345780msec

Disk stats (read/write):
  pmem0: ios=0/0, merge=0/0, ticks=0/0, in_queue=0, util=0.00%

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #4: rc4.log --]
[-- Type: text/x-log; name="rc4.log", Size: 2338 bytes --]

randrw: (g=0): rw=randrw, bs=4K-4K/4K-4K/4K-4K, ioengine=mmap, iodepth=1
fio-2.6
Starting 1 process
randrw: Laying out IO file(s) (1 file(s) / 2048MB)

randrw: (groupid=0, jobs=1): err= 0: pid=12678: Wed Aug 31 19:59:45 2016
  read : io=1024.7MB, bw=775489KB/s, iops=193872, runt=  1353msec
    clat (usec): min=1, max=297, avg= 1.67, stdev= 2.92
     lat (usec): min=1, max=297, avg= 1.70, stdev= 2.96
    clat percentiles (usec):
     |  1.00th=[    1],  5.00th=[    1], 10.00th=[    1], 20.00th=[    1],
     | 30.00th=[    1], 40.00th=[    1], 50.00th=[    2], 60.00th=[    2],
     | 70.00th=[    2], 80.00th=[    2], 90.00th=[    2], 95.00th=[    2],
     | 99.00th=[    3], 99.50th=[    4], 99.90th=[   12], 99.95th=[   12],
     | 99.99th=[  189]
    bw (KB  /s): min=736608, max=792296, per=98.58%, avg=764452.00, stdev=39377.36
  write: io=1023.4MB, bw=774513KB/s, iops=193628, runt=  1353msec
    clat (usec): min=2, max=235, avg= 2.66, stdev= 3.59
     lat (usec): min=2, max=235, avg= 2.70, stdev= 3.61
    clat percentiles (usec):
     |  1.00th=[    2],  5.00th=[    2], 10.00th=[    2], 20.00th=[    2],
     | 30.00th=[    2], 40.00th=[    2], 50.00th=[    3], 60.00th=[    3],
     | 70.00th=[    3], 80.00th=[    3], 90.00th=[    3], 95.00th=[    3],
     | 99.00th=[    4], 99.50th=[    6], 99.90th=[   13], 99.95th=[   14],
     | 99.99th=[  193]
    bw (KB  /s): min=736288, max=789440, per=98.50%, avg=762864.00, stdev=37584.14
    lat (usec) : 2=20.18%, 4=78.23%, 10=1.40%, 20=0.16%, 50=0.01%
    lat (usec) : 250=0.03%, 500=0.01%
  cpu          : usr=46.82%, sys=53.03%, ctx=135, majf=0, minf=786279
  IO depths    : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     issued    : total=r=262309/w=261979/d=0, short=r=0/w=0/d=0, drop=r=0/w=0/d=0
     latency   : target=0, window=0, percentile=100.00%, depth=1

Run status group 0 (all jobs):
   READ: io=1024.7MB, aggrb=775488KB/s, minb=775488KB/s, maxb=775488KB/s, mint=1353msec, maxt=1353msec
  WRITE: io=1023.4MB, aggrb=774512KB/s, minb=774512KB/s, maxb=774512KB/s, mint=1353msec, maxt=1353msec

Disk stats (read/write):
  pmem0: ios=0/0, merge=0/0, ticks=0/0, in_queue=0, util=0.00%

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> > > 
> > > DAX PMDs have been disabled since Jan Kara introduced DAX radix
> > > tree based locking.  This series allows DAX PMDs to participate in
> > > the DAX radix tree based locking scheme so that they can be re-
> > > enabled.
> > > 
> > > Changes since v1:
> > >  - PMD entry locking is now done based on the starting offset of
> > > the PMD entry, rather than on the radix tree slot which was
> > > unreliable. (Jan)
> > >  - Fixed the one issue I could find with hole punch.  As far as I
> > > can tell hole punch now works correctly for both PMD and PTE DAX
> > > entries, 4k zero pages and huge zero pages.
> > >  - Fixed the way that ext2 returns the size of holes in
> > > ext2_get_block(). (Jan)
> > >  - Made the 'wait_table' global variable static in respnse to a
> > > sparse warning.
> > >  - Fixed some more inconsitent usage between the names 'ret' and
> > > 'entry' for radix tree entry variables.
> > > 
> > > Ross Zwisler (9):
> > >   ext4: allow DAX writeback for hole punch
> > >   ext2: tell DAX the size of allocation holes
> > >   ext4: tell DAX the size of allocation holes
> > >   dax: remove buffer_size_valid()
> > >   dax: make 'wait_table' global variable static
> > >   dax: consistent variable naming for DAX entries
> > >   dax: coordinate locking for offsets in PMD range
> > >   dax: re-enable DAX PMD support
> > >   dax: remove "depends on BROKEN" from FS_DAX_PMD
> > > 
> > >  fs/Kconfig          |   1 -
> > >  fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------
> > > ------------
> > >  fs/ext2/inode.c     |   3 +
> > >  fs/ext4/inode.c     |   7 +-
> > >  include/linux/dax.h |  29 ++++-
> > >  mm/filemap.c        |   6 +-
> > >  6 files changed, 201 insertions(+), 142 deletions(-)
> > > 
> > > -- 
> > > 2.9.0
> > 
> > Ping on this series?  Any objections or comments?
> 
> Hi Ross,
> 
> I am seeing a major performance loss in fio mmap test with this patch-
> set applied.  This happens with or without my patches [1] applied on
> top of yours.  Without my patches, dax_pmd_fault() falls back to the
> pte handler since an mmap'ed address is not 2MB-aligned.
> 
> I have attached three test results.
>  o rc4.log - 4.8.0-rc4 (base)
>  o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
>  o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> 
> My test steps are as follows.
> 
> mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> mount -o dax /dev/pmem0 /mnt/pmem0
> numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio test.fio
> 
> "test.fio"
> ---
> [global]
> bs=4k
> size=2G
> directory=/mnt/pmem0
> ioengine=mmap
> [randrw]
> rw=randrw
> ---
> 
> Can you please take a look?

Yep, thanks for the report.
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> > > 
> > > DAX PMDs have been disabled since Jan Kara introduced DAX radix
> > > tree based locking.  This series allows DAX PMDs to participate in
> > > the DAX radix tree based locking scheme so that they can be re-
> > > enabled.
> > > 
> > > Changes since v1:
> > >  - PMD entry locking is now done based on the starting offset of
> > > the PMD entry, rather than on the radix tree slot which was
> > > unreliable. (Jan)
> > >  - Fixed the one issue I could find with hole punch.  As far as I
> > > can tell hole punch now works correctly for both PMD and PTE DAX
> > > entries, 4k zero pages and huge zero pages.
> > >  - Fixed the way that ext2 returns the size of holes in
> > > ext2_get_block(). (Jan)
> > >  - Made the 'wait_table' global variable static in respnse to a
> > > sparse warning.
> > >  - Fixed some more inconsitent usage between the names 'ret' and
> > > 'entry' for radix tree entry variables.
> > > 
> > > Ross Zwisler (9):
> > >   ext4: allow DAX writeback for hole punch
> > >   ext2: tell DAX the size of allocation holes
> > >   ext4: tell DAX the size of allocation holes
> > >   dax: remove buffer_size_valid()
> > >   dax: make 'wait_table' global variable static
> > >   dax: consistent variable naming for DAX entries
> > >   dax: coordinate locking for offsets in PMD range
> > >   dax: re-enable DAX PMD support
> > >   dax: remove "depends on BROKEN" from FS_DAX_PMD
> > > 
> > >  fs/Kconfig          |   1 -
> > >  fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------
> > > ------------
> > >  fs/ext2/inode.c     |   3 +
> > >  fs/ext4/inode.c     |   7 +-
> > >  include/linux/dax.h |  29 ++++-
> > >  mm/filemap.c        |   6 +-
> > >  6 files changed, 201 insertions(+), 142 deletions(-)
> > > 
> > > -- 
> > > 2.9.0
> > 
> > Ping on this series?  Any objections or comments?
> 
> Hi Ross,
> 
> I am seeing a major performance loss in fio mmap test with this patch-
> set applied.  This happens with or without my patches [1] applied on
> top of yours.  Without my patches, dax_pmd_fault() falls back to the
> pte handler since an mmap'ed address is not 2MB-aligned.
> 
> I have attached three test results.
>  o rc4.log - 4.8.0-rc4 (base)
>  o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
>  o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> 
> My test steps are as follows.
> 
> mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> mount -o dax /dev/pmem0 /mnt/pmem0
> numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio test.fio
> 
> "test.fio"
> ---
> [global]
> bs=4k
> size=2G
> directory=/mnt/pmem0
> ioengine=mmap
> [randrw]
> rw=randrw
> ---
> 
> Can you please take a look?

Yep, thanks for the report.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> > > 
> > > DAX PMDs have been disabled since Jan Kara introduced DAX radix
> > > tree based locking.  This series allows DAX PMDs to participate in
> > > the DAX radix tree based locking scheme so that they can be re-
> > > enabled.
> > > 
> > > Changes since v1:
> > >  - PMD entry locking is now done based on the starting offset of
> > > the PMD entry, rather than on the radix tree slot which was
> > > unreliable. (Jan)
> > >  - Fixed the one issue I could find with hole punch.  As far as I
> > > can tell hole punch now works correctly for both PMD and PTE DAX
> > > entries, 4k zero pages and huge zero pages.
> > >  - Fixed the way that ext2 returns the size of holes in
> > > ext2_get_block(). (Jan)
> > >  - Made the 'wait_table' global variable static in respnse to a
> > > sparse warning.
> > >  - Fixed some more inconsitent usage between the names 'ret' and
> > > 'entry' for radix tree entry variables.
> > > 
> > > Ross Zwisler (9):
> > >   ext4: allow DAX writeback for hole punch
> > >   ext2: tell DAX the size of allocation holes
> > >   ext4: tell DAX the size of allocation holes
> > >   dax: remove buffer_size_valid()
> > >   dax: make 'wait_table' global variable static
> > >   dax: consistent variable naming for DAX entries
> > >   dax: coordinate locking for offsets in PMD range
> > >   dax: re-enable DAX PMD support
> > >   dax: remove "depends on BROKEN" from FS_DAX_PMD
> > > 
> > >  fs/Kconfig          |   1 -
> > >  fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------
> > > ------------
> > >  fs/ext2/inode.c     |   3 +
> > >  fs/ext4/inode.c     |   7 +-
> > >  include/linux/dax.h |  29 ++++-
> > >  mm/filemap.c        |   6 +-
> > >  6 files changed, 201 insertions(+), 142 deletions(-)
> > > 
> > > -- 
> > > 2.9.0
> > 
> > Ping on this series?  Any objections or comments?
> 
> Hi Ross,
> 
> I am seeing a major performance loss in fio mmap test with this patch-
> set applied.  This happens with or without my patches [1] applied on
> top of yours.  Without my patches, dax_pmd_fault() falls back to the
> pte handler since an mmap'ed address is not 2MB-aligned.
> 
> I have attached three test results.
>  o rc4.log - 4.8.0-rc4 (base)
>  o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
>  o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> 
> My test steps are as follows.
> 
> mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> mount -o dax /dev/pmem0 /mnt/pmem0
> numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio test.fio
> 
> "test.fio"
> ---
> [global]
> bs=4k
> size=2G
> directory=/mnt/pmem0
> ioengine=mmap
> [randrw]
> rw=randrw
> ---
> 
> Can you please take a look?

Yep, thanks for the report.

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> > > 
> > > DAX PMDs have been disabled since Jan Kara introduced DAX radix
> > > tree based locking.��This series allows DAX PMDs to participate in
> > > the DAX radix tree based locking scheme so that they can be re-
> > > enabled.
> > > 
> > > Changes since v1:
> > > �- PMD entry locking is now done based on the starting offset of
> > > the PMD entry, rather than on the radix tree slot which was
> > > unreliable. (Jan)
> > > �- Fixed the one issue I could find with hole punch.��As far as I
> > > can tell hole punch now works correctly for both PMD and PTE DAX
> > > entries, 4k zero pages and huge zero pages.
> > > �- Fixed the way that ext2 returns the size of holes in
> > > ext2_get_block(). (Jan)
> > > �- Made the 'wait_table' global variable static in respnse to a
> > > sparse warning.
> > > �- Fixed some more inconsitent usage between the names 'ret' and
> > > 'entry' for radix tree entry variables.
> > > 
> > > Ross Zwisler (9):
> > > � ext4: allow DAX writeback for hole punch
> > > � ext2: tell DAX the size of allocation holes
> > > � ext4: tell DAX the size of allocation holes
> > > � dax: remove buffer_size_valid()
> > > � dax: make 'wait_table' global variable static
> > > � dax: consistent variable naming for DAX entries
> > > � dax: coordinate locking for offsets in PMD range
> > > � dax: re-enable DAX PMD support
> > > � dax: remove "depends on BROKEN" from FS_DAX_PMD
> > > 
> > > �fs/Kconfig����������|���1 -
> > > �fs/dax.c������������| 297 +++++++++++++++++++++++++++++-----------
> > > ------------
> > > �fs/ext2/inode.c�����|���3 +
> > > �fs/ext4/inode.c�����|���7 +-
> > > �include/linux/dax.h |��29 ++++-
> > > �mm/filemap.c��������|���6 +-
> > > �6 files changed, 201 insertions(+), 142 deletions(-)
> > > 
> > > --�
> > > 2.9.0
> > 
> > Ping on this series?��Any objections or comments?
> 
> Hi Ross,
> 
> I am seeing a major performance loss in fio mmap test with this patch-
> set applied. �This happens with or without my patches [1] applied on
> top of yours. �Without my patches,�dax_pmd_fault() falls back to the
> pte handler since an mmap'ed address is not 2MB-aligned.
> 
> I have attached three test results.
> �o rc4.log - 4.8.0-rc4 (base)
> �o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
> �o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> 
> My test steps are as follows.
> 
> mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> mount -o dax /dev/pmem0 /mnt/pmem0
> numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio test.fio
> 
> "test.fio"
> ---
> [global]
> bs=4k
> size=2G
> directory=/mnt/pmem0
> ioengine=mmap
> [randrw]
> rw=randrw
> ---
> 
> Can you please take a look?

Yep, thanks for the report.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> > > 
> > > DAX PMDs have been disabled since Jan Kara introduced DAX radix
> > > tree based locking.  This series allows DAX PMDs to participate in
> > > the DAX radix tree based locking scheme so that they can be re-
> > > enabled.
> > > 
> > > Changes since v1:
> > >  - PMD entry locking is now done based on the starting offset of
> > > the PMD entry, rather than on the radix tree slot which was
> > > unreliable. (Jan)
> > >  - Fixed the one issue I could find with hole punch.  As far as I
> > > can tell hole punch now works correctly for both PMD and PTE DAX
> > > entries, 4k zero pages and huge zero pages.
> > >  - Fixed the way that ext2 returns the size of holes in
> > > ext2_get_block(). (Jan)
> > >  - Made the 'wait_table' global variable static in respnse to a
> > > sparse warning.
> > >  - Fixed some more inconsitent usage between the names 'ret' and
> > > 'entry' for radix tree entry variables.
> > > 
> > > Ross Zwisler (9):
> > >   ext4: allow DAX writeback for hole punch
> > >   ext2: tell DAX the size of allocation holes
> > >   ext4: tell DAX the size of allocation holes
> > >   dax: remove buffer_size_valid()
> > >   dax: make 'wait_table' global variable static
> > >   dax: consistent variable naming for DAX entries
> > >   dax: coordinate locking for offsets in PMD range
> > >   dax: re-enable DAX PMD support
> > >   dax: remove "depends on BROKEN" from FS_DAX_PMD
> > > 
> > >  fs/Kconfig          |   1 -
> > >  fs/dax.c            | 297 +++++++++++++++++++++++++++++-----------
> > > ------------
> > >  fs/ext2/inode.c     |   3 +
> > >  fs/ext4/inode.c     |   7 +-
> > >  include/linux/dax.h |  29 ++++-
> > >  mm/filemap.c        |   6 +-
> > >  6 files changed, 201 insertions(+), 142 deletions(-)
> > > 
> > > -- 
> > > 2.9.0
> > 
> > Ping on this series?  Any objections or comments?
> 
> Hi Ross,
> 
> I am seeing a major performance loss in fio mmap test with this patch-
> set applied.  This happens with or without my patches [1] applied on
> top of yours.  Without my patches, dax_pmd_fault() falls back to the
> pte handler since an mmap'ed address is not 2MB-aligned.
> 
> I have attached three test results.
>  o rc4.log - 4.8.0-rc4 (base)
>  o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
>  o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> 
> My test steps are as follows.
> 
> mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> mount -o dax /dev/pmem0 /mnt/pmem0
> numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio test.fio
> 
> "test.fio"
> ---
> [global]
> bs=4k
> size=2G
> directory=/mnt/pmem0
> ioengine=mmap
> [randrw]
> rw=randrw
> ---
> 
> Can you please take a look?

Yep, thanks for the report.

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Kani, Toshimitsu]

On Wed, 2016-08-31 at 15:36 -0600, Ross Zwisler wrote:
> On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> > 
> > On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > > 
> > > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
 :
> > > 
> > > Ping on this series?  Any objections or comments?
> > 
> > Hi Ross,
> > 
> > I am seeing a major performance loss in fio mmap test with this
> > patch-set applied.  This happens with or without my patches [1]
> > applied on top of yours.  Without my patches, dax_pmd_fault() falls
> > back to the pte handler since an mmap'ed address is not 2MB-
> > aligned.
> > 
> > I have attached three test results.
> >  o rc4.log - 4.8.0-rc4 (base)
> >  o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
> >  o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> > 
> > My test steps are as follows.
> > 
> > mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> > mount -o dax /dev/pmem0 /mnt/pmem0
> > numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio
> > test.fio
> > 
> > "test.fio"
> > ---
> > [global]
> > bs=4k
> > size=2G
> > directory=/mnt/pmem0
> > ioengine=mmap
> > [randrw]
> > rw=randrw
> > ---
> > 
> > Can you please take a look?
> 
> Yep, thanks for the report.

I have some more observations.  It seems this issue is related with pmd
mappings after all.  fio creates "randrw.0.0" file.  In my setup, an
initial test run creates pmd mappings and hits this issue.  Subsequent
test runs (i.e. randrw.0.0 exists), without my patches, fall back to
pte mappings and do not hit this issue.  With my patches applied,
subsequent runs still create pmd mappings and hit this issue.

Thanks,
-Toshi  






_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Kani, Toshimitsu]

On Wed, 2016-08-31 at 15:36 -0600, Ross Zwisler wrote:
> On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> > 
> > On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > > 
> > > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
 :
> > > 
> > > Ping on this series?  Any objections or comments?
> > 
> > Hi Ross,
> > 
> > I am seeing a major performance loss in fio mmap test with this
> > patch-set applied.  This happens with or without my patches [1]
> > applied on top of yours.  Without my patches, dax_pmd_fault() falls
> > back to the pte handler since an mmap'ed address is not 2MB-
> > aligned.
> > 
> > I have attached three test results.
> >  o rc4.log - 4.8.0-rc4 (base)
> >  o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
> >  o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> > 
> > My test steps are as follows.
> > 
> > mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> > mount -o dax /dev/pmem0 /mnt/pmem0
> > numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio
> > test.fio
> > 
> > "test.fio"
> > ---
> > [global]
> > bs=4k
> > size=2G
> > directory=/mnt/pmem0
> > ioengine=mmap
> > [randrw]
> > rw=randrw
> > ---
> > 
> > Can you please take a look?
> 
> Yep, thanks for the report.

I have some more observations.  It seems this issue is related with pmd
mappings after all.  fio creates "randrw.0.0" file.  In my setup, an
initial test run creates pmd mappings and hits this issue.  Subsequent
test runs (i.e. randrw.0.0 exists), without my patches, fall back to
pte mappings and do not hit this issue.  With my patches applied,
subsequent runs still create pmd mappings and hit this issue.

Thanks,
-Toshi  






_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Kani, Toshimitsu]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1878 bytes --]

On Wed, 2016-08-31 at 15:36 -0600, Ross Zwisler wrote:
> On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> > 
> > On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > > 
> > > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
 :
> > > 
> > > Ping on this series?  Any objections or comments?
> > 
> > Hi Ross,
> > 
> > I am seeing a major performance loss in fio mmap test with this
> > patch-set applied.  This happens with or without my patches [1]
> > applied on top of yours.  Without my patches, dax_pmd_fault() falls
> > back to the pte handler since an mmap'ed address is not 2MB-
> > aligned.
> > 
> > I have attached three test results.
> >  o rc4.log - 4.8.0-rc4 (base)
> >  o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
> >  o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> > 
> > My test steps are as follows.
> > 
> > mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> > mount -o dax /dev/pmem0 /mnt/pmem0
> > numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio
> > test.fio
> > 
> > "test.fio"
> > ---
> > [global]
> > bs=4k
> > size=2G
> > directory=/mnt/pmem0
> > ioengine=mmap
> > [randrw]
> > rw=randrw
> > ---
> > 
> > Can you please take a look?
> 
> Yep, thanks for the report.

I have some more observations.  It seems this issue is related with pmd
mappings after all.  fio creates "randrw.0.0" file.  In my setup, an
initial test run creates pmd mappings and hits this issue.  Subsequent
test runs (i.e. randrw.0.0 exists), without my patches, fall back to
pte mappings and do not hit this issue.  With my patches applied,
subsequent runs still create pmd mappings and hit this issue.

Thanks,
-Toshi  






N‹§²æìr¸›zǧu©ž²Æ {\b­†éì¹»\x1c®&Þ–)îÆi¢žØ^n‡r¶‰šŽŠÝ¢j$½§$¢¸\x05¢¹¨­è§~Š'.)îÄÃ,yèm¶ŸÿÃ\f%Š{±šj+ƒðèž×¦j)Z†·Ÿ

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Kani, Toshimitsu]

On Wed, 2016-08-31 at 15:36 -0600, Ross Zwisler wrote:
> On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> > 
> > On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > > 
> > > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
 :
> > > 
> > > Ping on this series?  Any objections or comments?
> > 
> > Hi Ross,
> > 
> > I am seeing a major performance loss in fio mmap test with this
> > patch-set applied.  This happens with or without my patches [1]
> > applied on top of yours.  Without my patches, dax_pmd_fault() falls
> > back to the pte handler since an mmap'ed address is not 2MB-
> > aligned.
> > 
> > I have attached three test results.
> >  o rc4.log - 4.8.0-rc4 (base)
> >  o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
> >  o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> > 
> > My test steps are as follows.
> > 
> > mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> > mount -o dax /dev/pmem0 /mnt/pmem0
> > numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio
> > test.fio
> > 
> > "test.fio"
> > ---
> > [global]
> > bs=4k
> > size=2G
> > directory=/mnt/pmem0
> > ioengine=mmap
> > [randrw]
> > rw=randrw
> > ---
> > 
> > Can you please take a look?
> 
> Yep, thanks for the report.

I have some more observations.  It seems this issue is related with pmd
mappings after all.  fio creates "randrw.0.0" file.  In my setup, an
initial test run creates pmd mappings and hits this issue.  Subsequent
test runs (i.e. randrw.0.0 exists), without my patches, fall back to
pte mappings and do not hit this issue.  With my patches applied,
subsequent runs still create pmd mappings and hit this issue.

Thanks,
-Toshi  

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Wed, Aug 31, 2016 at 10:08:59PM +0000, Kani, Toshimitsu wrote:
> On Wed, 2016-08-31 at 15:36 -0600, Ross Zwisler wrote:
> > On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> > > 
> > > On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > > > 
> > > > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
>  :
> > > > 
> > > > Ping on this series?  Any objections or comments?
> > > 
> > > Hi Ross,
> > > 
> > > I am seeing a major performance loss in fio mmap test with this
> > > patch-set applied.  This happens with or without my patches [1]
> > > applied on top of yours.  Without my patches, dax_pmd_fault() falls
> > > back to the pte handler since an mmap'ed address is not 2MB-
> > > aligned.
> > > 
> > > I have attached three test results.
> > >  o rc4.log - 4.8.0-rc4 (base)
> > >  o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
> > >  o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> > > 
> > > My test steps are as follows.
> > > 
> > > mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> > > mount -o dax /dev/pmem0 /mnt/pmem0
> > > numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio
> > > test.fio
> > > 
> > > "test.fio"
> > > ---
> > > [global]
> > > bs=4k
> > > size=2G
> > > directory=/mnt/pmem0
> > > ioengine=mmap
> > > [randrw]
> > > rw=randrw
> > > ---
> > > 
> > > Can you please take a look?
> > 
> > Yep, thanks for the report.
> 
> I have some more observations.  It seems this issue is related with pmd
> mappings after all.  fio creates "randrw.0.0" file.  In my setup, an
> initial test run creates pmd mappings and hits this issue.  Subsequent
> test runs (i.e. randrw.0.0 exists), without my patches, fall back to
> pte mappings and do not hit this issue.  With my patches applied,
> subsequent runs still create pmd mappings and hit this issue.

I've been able to reproduce this on my test setup, and I agree that it appears
to be related to the PMD mappings.  Here's my performance with 4k mappings,
either before my set or without your patches:

 READ: io=1022.7MB, aggrb=590299KB/s, minb=590299KB/s, maxb=590299KB/s, mint=1774msec, maxt=1774msec
WRITE: io=1025.4MB, aggrb=591860KB/s, minb=591860KB/s, maxb=591860KB/s, mint=1774msec, maxt=1774msec

And with 2 MiB pages:

 READ: io=1022.7MB, aggrb=17931KB/s, minb=17931KB/s, maxb=17931KB/s, mint=58401msec, maxt=58401msec
WRITE: io=1025.4MB, aggrb=17978KB/s, minb=17978KB/s, maxb=17978KB/s, mint=58401msec, maxt=58401msec

Dan is seeing something similar with his device DAX code with 2MiB pages, so
our best guess right now is that it must be in the PMD MM code, since that's
really the only thing that the fs/dax and device/dax implementations share.

Interestingly, I'm getting the opposite results when testing in my VM.  Here's
the performance with 4k pages:

 READ: io=1022.7MB, aggrb=251728KB/s, minb=251728KB/s, maxb=251728KB/s, mint=4160msec, maxt=4160msec
WRITE: io=1025.4MB, aggrb=252394KB/s, minb=252394KB/s, maxb=252394KB/s, mint=4160msec, maxt=4160msec

And with 2MiB pages:

 READ: io=1022.7MB, aggrb=902751KB/s, minb=902751KB/s, maxb=902751KB/s, mint=1160msec, maxt=1160msec
WRITE: io=1025.4MB, aggrb=905137KB/s, minb=905137KB/s, maxb=905137KB/s, mint=1160msec, maxt=1160msec

This is a totally different system, so the halved 4k performance in the VM
isn't comparable to my bare metal system, but it's interesting that the use of
PMDs over tripled the performance in my VM.  Hmm...

We'll keep digging into this.  Thanks again for the report. :)
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Wed, Aug 31, 2016 at 10:08:59PM +0000, Kani, Toshimitsu wrote:
> On Wed, 2016-08-31 at 15:36 -0600, Ross Zwisler wrote:
> > On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> > > 
> > > On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > > > 
> > > > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
>  :
> > > > 
> > > > Ping on this series?  Any objections or comments?
> > > 
> > > Hi Ross,
> > > 
> > > I am seeing a major performance loss in fio mmap test with this
> > > patch-set applied.  This happens with or without my patches [1]
> > > applied on top of yours.  Without my patches, dax_pmd_fault() falls
> > > back to the pte handler since an mmap'ed address is not 2MB-
> > > aligned.
> > > 
> > > I have attached three test results.
> > >  o rc4.log - 4.8.0-rc4 (base)
> > >  o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
> > >  o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> > > 
> > > My test steps are as follows.
> > > 
> > > mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> > > mount -o dax /dev/pmem0 /mnt/pmem0
> > > numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio
> > > test.fio
> > > 
> > > "test.fio"
> > > ---
> > > [global]
> > > bs=4k
> > > size=2G
> > > directory=/mnt/pmem0
> > > ioengine=mmap
> > > [randrw]
> > > rw=randrw
> > > ---
> > > 
> > > Can you please take a look?
> > 
> > Yep, thanks for the report.
> 
> I have some more observations.  It seems this issue is related with pmd
> mappings after all.  fio creates "randrw.0.0" file.  In my setup, an
> initial test run creates pmd mappings and hits this issue.  Subsequent
> test runs (i.e. randrw.0.0 exists), without my patches, fall back to
> pte mappings and do not hit this issue.  With my patches applied,
> subsequent runs still create pmd mappings and hit this issue.

I've been able to reproduce this on my test setup, and I agree that it appears
to be related to the PMD mappings.  Here's my performance with 4k mappings,
either before my set or without your patches:

 READ: io=1022.7MB, aggrb=590299KB/s, minb=590299KB/s, maxb=590299KB/s, mint=1774msec, maxt=1774msec
WRITE: io=1025.4MB, aggrb=591860KB/s, minb=591860KB/s, maxb=591860KB/s, mint=1774msec, maxt=1774msec

And with 2 MiB pages:

 READ: io=1022.7MB, aggrb=17931KB/s, minb=17931KB/s, maxb=17931KB/s, mint=58401msec, maxt=58401msec
WRITE: io=1025.4MB, aggrb=17978KB/s, minb=17978KB/s, maxb=17978KB/s, mint=58401msec, maxt=58401msec

Dan is seeing something similar with his device DAX code with 2MiB pages, so
our best guess right now is that it must be in the PMD MM code, since that's
really the only thing that the fs/dax and device/dax implementations share.

Interestingly, I'm getting the opposite results when testing in my VM.  Here's
the performance with 4k pages:

 READ: io=1022.7MB, aggrb=251728KB/s, minb=251728KB/s, maxb=251728KB/s, mint=4160msec, maxt=4160msec
WRITE: io=1025.4MB, aggrb=252394KB/s, minb=252394KB/s, maxb=252394KB/s, mint=4160msec, maxt=4160msec

And with 2MiB pages:

 READ: io=1022.7MB, aggrb=902751KB/s, minb=902751KB/s, maxb=902751KB/s, mint=1160msec, maxt=1160msec
WRITE: io=1025.4MB, aggrb=905137KB/s, minb=905137KB/s, maxb=905137KB/s, mint=1160msec, maxt=1160msec

This is a totally different system, so the halved 4k performance in the VM
isn't comparable to my bare metal system, but it's interesting that the use of
PMDs over tripled the performance in my VM.  Hmm...

We'll keep digging into this.  Thanks again for the report. :)

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Wed, Aug 31, 2016 at 10:08:59PM +0000, Kani, Toshimitsu wrote:
> On Wed, 2016-08-31 at 15:36 -0600, Ross Zwisler wrote:
> > On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> > > 
> > > On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > > > 
> > > > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
>  :
> > > > 
> > > > Ping on this series?  Any objections or comments?
> > > 
> > > Hi Ross,
> > > 
> > > I am seeing a major performance loss in fio mmap test with this
> > > patch-set applied.  This happens with or without my patches [1]
> > > applied on top of yours.  Without my patches, dax_pmd_fault() falls
> > > back to the pte handler since an mmap'ed address is not 2MB-
> > > aligned.
> > > 
> > > I have attached three test results.
> > >  o rc4.log - 4.8.0-rc4 (base)
> > >  o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
> > >  o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> > > 
> > > My test steps are as follows.
> > > 
> > > mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> > > mount -o dax /dev/pmem0 /mnt/pmem0
> > > numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio
> > > test.fio
> > > 
> > > "test.fio"
> > > ---
> > > [global]
> > > bs=4k
> > > size=2G
> > > directory=/mnt/pmem0
> > > ioengine=mmap
> > > [randrw]
> > > rw=randrw
> > > ---
> > > 
> > > Can you please take a look?
> > 
> > Yep, thanks for the report.
> 
> I have some more observations.  It seems this issue is related with pmd
> mappings after all.  fio creates "randrw.0.0" file.  In my setup, an
> initial test run creates pmd mappings and hits this issue.  Subsequent
> test runs (i.e. randrw.0.0 exists), without my patches, fall back to
> pte mappings and do not hit this issue.  With my patches applied,
> subsequent runs still create pmd mappings and hit this issue.

I've been able to reproduce this on my test setup, and I agree that it appears
to be related to the PMD mappings.  Here's my performance with 4k mappings,
either before my set or without your patches:

 READ: io=1022.7MB, aggrb=590299KB/s, minb=590299KB/s, maxb=590299KB/s, mint=1774msec, maxt=1774msec
WRITE: io=1025.4MB, aggrb=591860KB/s, minb=591860KB/s, maxb=591860KB/s, mint=1774msec, maxt=1774msec

And with 2 MiB pages:

 READ: io=1022.7MB, aggrb=17931KB/s, minb=17931KB/s, maxb=17931KB/s, mint=58401msec, maxt=58401msec
WRITE: io=1025.4MB, aggrb=17978KB/s, minb=17978KB/s, maxb=17978KB/s, mint=58401msec, maxt=58401msec

Dan is seeing something similar with his device DAX code with 2MiB pages, so
our best guess right now is that it must be in the PMD MM code, since that's
really the only thing that the fs/dax and device/dax implementations share.

Interestingly, I'm getting the opposite results when testing in my VM.  Here's
the performance with 4k pages:

 READ: io=1022.7MB, aggrb=251728KB/s, minb=251728KB/s, maxb=251728KB/s, mint=4160msec, maxt=4160msec
WRITE: io=1025.4MB, aggrb=252394KB/s, minb=252394KB/s, maxb=252394KB/s, mint=4160msec, maxt=4160msec

And with 2MiB pages:

 READ: io=1022.7MB, aggrb=902751KB/s, minb=902751KB/s, maxb=902751KB/s, mint=1160msec, maxt=1160msec
WRITE: io=1025.4MB, aggrb=905137KB/s, minb=905137KB/s, maxb=905137KB/s, mint=1160msec, maxt=1160msec

This is a totally different system, so the halved 4k performance in the VM
isn't comparable to my bare metal system, but it's interesting that the use of
PMDs over tripled the performance in my VM.  Hmm...

We'll keep digging into this.  Thanks again for the report. :)

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Wed, Aug 31, 2016 at 10:08:59PM +0000, Kani, Toshimitsu wrote:
> On Wed, 2016-08-31 at 15:36 -0600, Ross Zwisler wrote:
> > On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> > > 
> > > On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > > > 
> > > > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
> �:
> > > > 
> > > > Ping on this series?��Any objections or comments?
> > > 
> > > Hi Ross,
> > > 
> > > I am seeing a major performance loss in fio mmap test with this
> > > patch-set applied. �This happens with or without my patches [1]
> > > applied on top of yours. �Without my patches,�dax_pmd_fault() falls
> > > back to the pte handler since an mmap'ed address is not 2MB-
> > > aligned.
> > > 
> > > I have attached three test results.
> > > �o rc4.log - 4.8.0-rc4 (base)
> > > �o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
> > > �o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> > > 
> > > My test steps are as follows.
> > > 
> > > mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> > > mount -o dax /dev/pmem0 /mnt/pmem0
> > > numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio
> > > test.fio
> > > 
> > > "test.fio"
> > > ---
> > > [global]
> > > bs=4k
> > > size=2G
> > > directory=/mnt/pmem0
> > > ioengine=mmap
> > > [randrw]
> > > rw=randrw
> > > ---
> > > 
> > > Can you please take a look?
> > 
> > Yep, thanks for the report.
> 
> I have some more observations. �It seems this issue is related with pmd
> mappings after all. �fio creates "randrw.0.0" file. �In my setup, an
> initial test run creates pmd mappings and hits this issue. �Subsequent
> test runs (i.e. randrw.0.0 exists), without my patches, fall back to
> pte mappings and do not hit this issue. �With my patches applied,
> subsequent runs still create pmd mappings and hit this issue.

I've been able to reproduce this on my test setup, and I agree that it appears
to be related to the PMD mappings.  Here's my performance with 4k mappings,
either before my set or without your patches:

 READ: io=1022.7MB, aggrb=590299KB/s, minb=590299KB/s, maxb=590299KB/s, mint=1774msec, maxt=1774msec
WRITE: io=1025.4MB, aggrb=591860KB/s, minb=591860KB/s, maxb=591860KB/s, mint=1774msec, maxt=1774msec

And with 2 MiB pages:

 READ: io=1022.7MB, aggrb=17931KB/s, minb=17931KB/s, maxb=17931KB/s, mint=58401msec, maxt=58401msec
WRITE: io=1025.4MB, aggrb=17978KB/s, minb=17978KB/s, maxb=17978KB/s, mint=58401msec, maxt=58401msec

Dan is seeing something similar with his device DAX code with 2MiB pages, so
our best guess right now is that it must be in the PMD MM code, since that's
really the only thing that the fs/dax and device/dax implementations share.

Interestingly, I'm getting the opposite results when testing in my VM.  Here's
the performance with 4k pages:

 READ: io=1022.7MB, aggrb=251728KB/s, minb=251728KB/s, maxb=251728KB/s, mint=4160msec, maxt=4160msec
WRITE: io=1025.4MB, aggrb=252394KB/s, minb=252394KB/s, maxb=252394KB/s, mint=4160msec, maxt=4160msec

And with 2MiB pages:

 READ: io=1022.7MB, aggrb=902751KB/s, minb=902751KB/s, maxb=902751KB/s, mint=1160msec, maxt=1160msec
WRITE: io=1025.4MB, aggrb=905137KB/s, minb=905137KB/s, maxb=905137KB/s, mint=1160msec, maxt=1160msec

This is a totally different system, so the halved 4k performance in the VM
isn't comparable to my bare metal system, but it's interesting that the use of
PMDs over tripled the performance in my VM.  Hmm...

We'll keep digging into this.  Thanks again for the report. :)

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v2 0/9] re-enable DAX PMD support

[Ross Zwisler]

On Wed, Aug 31, 2016 at 10:08:59PM +0000, Kani, Toshimitsu wrote:
> On Wed, 2016-08-31 at 15:36 -0600, Ross Zwisler wrote:
> > On Wed, Aug 31, 2016 at 08:20:48PM +0000, Kani, Toshimitsu wrote:
> > > 
> > > On Tue, 2016-08-30 at 17:01 -0600, Ross Zwisler wrote:
> > > > 
> > > > On Tue, Aug 23, 2016 at 04:04:10PM -0600, Ross Zwisler wrote:
>  :
> > > > 
> > > > Ping on this series?  Any objections or comments?
> > > 
> > > Hi Ross,
> > > 
> > > I am seeing a major performance loss in fio mmap test with this
> > > patch-set applied.  This happens with or without my patches [1]
> > > applied on top of yours.  Without my patches, dax_pmd_fault() falls
> > > back to the pte handler since an mmap'ed address is not 2MB-
> > > aligned.
> > > 
> > > I have attached three test results.
> > >  o rc4.log - 4.8.0-rc4 (base)
> > >  o non-pmd.log - 4.8.0-rc4 + your patchset (fall back to pte)
> > >  o pmd.log - 4.8.0-rc4 + your patchset + my patchset (use pmd maps)
> > > 
> > > My test steps are as follows.
> > > 
> > > mkfs.ext4 -O bigalloc -C 2M /dev/pmem0
> > > mount -o dax /dev/pmem0 /mnt/pmem0
> > > numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio
> > > test.fio
> > > 
> > > "test.fio"
> > > ---
> > > [global]
> > > bs=4k
> > > size=2G
> > > directory=/mnt/pmem0
> > > ioengine=mmap
> > > [randrw]
> > > rw=randrw
> > > ---
> > > 
> > > Can you please take a look?
> > 
> > Yep, thanks for the report.
> 
> I have some more observations.  It seems this issue is related with pmd
> mappings after all.  fio creates "randrw.0.0" file.  In my setup, an
> initial test run creates pmd mappings and hits this issue.  Subsequent
> test runs (i.e. randrw.0.0 exists), without my patches, fall back to
> pte mappings and do not hit this issue.  With my patches applied,
> subsequent runs still create pmd mappings and hit this issue.

I've been able to reproduce this on my test setup, and I agree that it appears
to be related to the PMD mappings.  Here's my performance with 4k mappings,
either before my set or without your patches:

 READ: io=1022.7MB, aggrb=590299KB/s, minb=590299KB/s, maxb=590299KB/s, mint=1774msec, maxt=1774msec
WRITE: io=1025.4MB, aggrb=591860KB/s, minb=591860KB/s, maxb=591860KB/s, mint=1774msec, maxt=1774msec

And with 2 MiB pages:

 READ: io=1022.7MB, aggrb=17931KB/s, minb=17931KB/s, maxb=17931KB/s, mint=58401msec, maxt=58401msec
WRITE: io=1025.4MB, aggrb=17978KB/s, minb=17978KB/s, maxb=17978KB/s, mint=58401msec, maxt=58401msec

Dan is seeing something similar with his device DAX code with 2MiB pages, so
our best guess right now is that it must be in the PMD MM code, since that's
really the only thing that the fs/dax and device/dax implementations share.

Interestingly, I'm getting the opposite results when testing in my VM.  Here's
the performance with 4k pages:

 READ: io=1022.7MB, aggrb=251728KB/s, minb=251728KB/s, maxb=251728KB/s, mint=4160msec, maxt=4160msec
WRITE: io=1025.4MB, aggrb=252394KB/s, minb=252394KB/s, maxb=252394KB/s, mint=4160msec, maxt=4160msec

And with 2MiB pages:

 READ: io=1022.7MB, aggrb=902751KB/s, minb=902751KB/s, maxb=902751KB/s, mint=1160msec, maxt=1160msec
WRITE: io=1025.4MB, aggrb=905137KB/s, minb=905137KB/s, maxb=905137KB/s, mint=1160msec, maxt=1160msec

This is a totally different system, so the halved 4k performance in the VM
isn't comparable to my bare metal system, but it's interesting that the use of
PMDs over tripled the performance in my VM.  Hmm...

We'll keep digging into this.  Thanks again for the report. :)