From: Conor Dooley <conor@kernel.org> To: Prabhakar <prabhakar.csengg@gmail.com> Cc: Paul Walmsley <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, Geert Uytterhoeven <geert+renesas@glider.be>, Magnus Damm <magnus.damm@gmail.com>, Heiko Stuebner <heiko@sntech.de>, Conor Dooley <conor.dooley@microchip.com>, Samuel Holland <samuel@sholland.org>, Guo Ren <guoren@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Jisheng Zhang <jszhang@kernel.org>, Atish Patra <atishp@rivosinc.com>, Anup Patel <apatel@ventanamicro.com>, Andrew Jones <ajones@ventanamicro.com>, Nathan Chancellor <nathan@kernel.org>, Philipp Tomsich <philipp.tomsich@vrull.eu>, devicetree@vger.kernel.org, linux-riscv@lists.infradead.org, linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Biju Das <biju.das.jz@bp.renesas.com>, Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Subject: Re: [PATCH v5 1/6] riscv: asm: alternative-macros: Introduce ALTERNATIVE_3() macro Date: Sat, 17 Dec 2022 21:41:36 +0000 [thread overview] Message-ID: <Y543kM4070CSDtZi@spud> (raw) In-Reply-To: <20221212115505.36770-2-prabhakar.mahadev-lad.rj@bp.renesas.com> [-- Attachment #1: Type: text/plain, Size: 5853 bytes --] On Mon, Dec 12, 2022 at 11:55:00AM +0000, Prabhakar wrote: > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Introduce ALTERNATIVE_3() macro. > > A vendor wants to replace an old_content, but another vendor has used > ALTERNATIVE_2() to patch its customized content at the same location. > In this case, this vendor can use macro ALTERNATIVE_3() and then replace > ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content. > > While at it update comment above ALTERNATIVE_2() macro and make it generic > so that the comment holds good for any new addition of ALTERNATIVE_X() > macros. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > v4->v5 > * Rebased the patch on top of Andrew's series (now in Palmers for next-branch) > * Updated comment for ALTERNATIVE_x() as suggested by Heiko > > RFC v3 -> v4 > * New patch > --- > arch/riscv/include/asm/alternative-macros.h | 46 ++++++++++++++++++--- > 1 file changed, 41 insertions(+), 5 deletions(-) > > diff --git a/arch/riscv/include/asm/alternative-macros.h b/arch/riscv/include/asm/alternative-macros.h > index 7226e2462584..a5b4691520da 100644 > --- a/arch/riscv/include/asm/alternative-macros.h > +++ b/arch/riscv/include/asm/alternative-macros.h > @@ -50,8 +50,17 @@ > ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2 > .endm > > +.macro ALTERNATIVE_CFG_3 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \ > + new_c_2, vendor_id_2, errata_id_2, enable_2, \ > + new_c_3, vendor_id_3, errata_id_3, enable_3 > + ALTERNATIVE_CFG_2 \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1, \ > + \new_c_2, \vendor_id_2, \errata_id_2, \enable_2 > + ALT_NEW_CONTENT \vendor_id_3, \errata_id_3, \enable_3, \new_c_3 > +.endm > + > #define __ALTERNATIVE_CFG(...) ALTERNATIVE_CFG __VA_ARGS__ > #define __ALTERNATIVE_CFG_2(...) ALTERNATIVE_CFG_2 __VA_ARGS__ > +#define __ALTERNATIVE_CFG_3(...) ALTERNATIVE_CFG_3 __VA_ARGS__ > > #else /* !__ASSEMBLY__ */ > > @@ -98,6 +107,13 @@ > __ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1) \ > ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2) > > +#define __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \ > + new_c_2, vendor_id_2, errata_id_2, enable_2, \ > + new_c_3, vendor_id_3, errata_id_3, enable_3) \ > + __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \ > + new_c_2, vendor_id_2, errata_id_2, enable_2) \ > + ALT_NEW_CONTENT(vendor_id_3, errata_id_3, enable_3, new_c_3) > + > #endif /* __ASSEMBLY__ */ > > #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \ > @@ -108,6 +124,13 @@ > __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \ > new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2)) > > +#define _ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1, \ > + new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2, \ > + new_c_3, vendor_id_3, errata_id_3, CONFIG_k_3) \ > + __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \ > + new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2), \ > + new_c_3, vendor_id_3, errata_id_3, IS_ENABLED(CONFIG_k_3)) > + > #else /* CONFIG_RISCV_ALTERNATIVE */ > #ifdef __ASSEMBLY__ > > @@ -152,15 +175,28 @@ > _ALTERNATIVE_CFG(old_content, new_content, vendor_id, errata_id, CONFIG_k) > > /* > - * A vendor wants to replace an old_content, but another vendor has used > - * ALTERNATIVE() to patch its customized content at the same location. In > - * this case, this vendor can create a new macro ALTERNATIVE_2() based > - * on the following sample code and then replace ALTERNATIVE() with > - * ALTERNATIVE_2() to append its customized content. > + * ALTERNATIVE_x macros allow providing multiple replacement options > + * for an ALTERNATIVE code section. This is helpful if multiple > + * implementation variants for the same functionality exist for > + * different cpu cores. I think this last sentence should be: "This is helpful if multiple implementation variants exist for the same functionality." I don't think CPU cores is the right level of "granularity". > + * > + * Usage: > + * ALTERNATIVE_x(old_content, > + * new_content1, vendor_id1, errata_id1, CONFIG_k1, > + * new_content2, vendor_id2, errata_id2, CONFIG_k2, > + * ... > + * new_contentx, vendor_idx, errata_idx, CONFIG_kx) > */ > #define ALTERNATIVE_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \ > new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2) \ > _ALTERNATIVE_CFG_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \ > new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2) > > +#define ALTERNATIVE_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \ > + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \ > + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3) \ > + _ALTERNATIVE_CFG_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \ > + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \ > + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3) btw, why is this indented with spaces when the line above it is indented with tabs? (At least, that is how it appears in mutt). With those minor bits & the suggested fixes from Drew/Geert: Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Thanks, Conor. > + > #endif > -- > 2.25.1 > [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Conor Dooley <conor@kernel.org> To: Prabhakar <prabhakar.csengg@gmail.com> Cc: Paul Walmsley <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, Geert Uytterhoeven <geert+renesas@glider.be>, Magnus Damm <magnus.damm@gmail.com>, Heiko Stuebner <heiko@sntech.de>, Conor Dooley <conor.dooley@microchip.com>, Samuel Holland <samuel@sholland.org>, Guo Ren <guoren@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Jisheng Zhang <jszhang@kernel.org>, Atish Patra <atishp@rivosinc.com>, Anup Patel <apatel@ventanamicro.com>, Andrew Jones <ajones@ventanamicro.com>, Nathan Chancellor <nathan@kernel.org>, Philipp Tomsich <philipp.tomsich@vrull.eu>, devicetree@vger.kernel.org, linux-riscv@lists.infradead.org, linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Biju Das <biju.das.jz@bp.renesas.com>, Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Subject: Re: [PATCH v5 1/6] riscv: asm: alternative-macros: Introduce ALTERNATIVE_3() macro Date: Sat, 17 Dec 2022 21:41:36 +0000 [thread overview] Message-ID: <Y543kM4070CSDtZi@spud> (raw) In-Reply-To: <20221212115505.36770-2-prabhakar.mahadev-lad.rj@bp.renesas.com> [-- Attachment #1.1: Type: text/plain, Size: 5853 bytes --] On Mon, Dec 12, 2022 at 11:55:00AM +0000, Prabhakar wrote: > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Introduce ALTERNATIVE_3() macro. > > A vendor wants to replace an old_content, but another vendor has used > ALTERNATIVE_2() to patch its customized content at the same location. > In this case, this vendor can use macro ALTERNATIVE_3() and then replace > ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content. > > While at it update comment above ALTERNATIVE_2() macro and make it generic > so that the comment holds good for any new addition of ALTERNATIVE_X() > macros. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > v4->v5 > * Rebased the patch on top of Andrew's series (now in Palmers for next-branch) > * Updated comment for ALTERNATIVE_x() as suggested by Heiko > > RFC v3 -> v4 > * New patch > --- > arch/riscv/include/asm/alternative-macros.h | 46 ++++++++++++++++++--- > 1 file changed, 41 insertions(+), 5 deletions(-) > > diff --git a/arch/riscv/include/asm/alternative-macros.h b/arch/riscv/include/asm/alternative-macros.h > index 7226e2462584..a5b4691520da 100644 > --- a/arch/riscv/include/asm/alternative-macros.h > +++ b/arch/riscv/include/asm/alternative-macros.h > @@ -50,8 +50,17 @@ > ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2 > .endm > > +.macro ALTERNATIVE_CFG_3 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \ > + new_c_2, vendor_id_2, errata_id_2, enable_2, \ > + new_c_3, vendor_id_3, errata_id_3, enable_3 > + ALTERNATIVE_CFG_2 \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1, \ > + \new_c_2, \vendor_id_2, \errata_id_2, \enable_2 > + ALT_NEW_CONTENT \vendor_id_3, \errata_id_3, \enable_3, \new_c_3 > +.endm > + > #define __ALTERNATIVE_CFG(...) ALTERNATIVE_CFG __VA_ARGS__ > #define __ALTERNATIVE_CFG_2(...) ALTERNATIVE_CFG_2 __VA_ARGS__ > +#define __ALTERNATIVE_CFG_3(...) ALTERNATIVE_CFG_3 __VA_ARGS__ > > #else /* !__ASSEMBLY__ */ > > @@ -98,6 +107,13 @@ > __ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1) \ > ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2) > > +#define __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \ > + new_c_2, vendor_id_2, errata_id_2, enable_2, \ > + new_c_3, vendor_id_3, errata_id_3, enable_3) \ > + __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \ > + new_c_2, vendor_id_2, errata_id_2, enable_2) \ > + ALT_NEW_CONTENT(vendor_id_3, errata_id_3, enable_3, new_c_3) > + > #endif /* __ASSEMBLY__ */ > > #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \ > @@ -108,6 +124,13 @@ > __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \ > new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2)) > > +#define _ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1, \ > + new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2, \ > + new_c_3, vendor_id_3, errata_id_3, CONFIG_k_3) \ > + __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \ > + new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2), \ > + new_c_3, vendor_id_3, errata_id_3, IS_ENABLED(CONFIG_k_3)) > + > #else /* CONFIG_RISCV_ALTERNATIVE */ > #ifdef __ASSEMBLY__ > > @@ -152,15 +175,28 @@ > _ALTERNATIVE_CFG(old_content, new_content, vendor_id, errata_id, CONFIG_k) > > /* > - * A vendor wants to replace an old_content, but another vendor has used > - * ALTERNATIVE() to patch its customized content at the same location. In > - * this case, this vendor can create a new macro ALTERNATIVE_2() based > - * on the following sample code and then replace ALTERNATIVE() with > - * ALTERNATIVE_2() to append its customized content. > + * ALTERNATIVE_x macros allow providing multiple replacement options > + * for an ALTERNATIVE code section. This is helpful if multiple > + * implementation variants for the same functionality exist for > + * different cpu cores. I think this last sentence should be: "This is helpful if multiple implementation variants exist for the same functionality." I don't think CPU cores is the right level of "granularity". > + * > + * Usage: > + * ALTERNATIVE_x(old_content, > + * new_content1, vendor_id1, errata_id1, CONFIG_k1, > + * new_content2, vendor_id2, errata_id2, CONFIG_k2, > + * ... > + * new_contentx, vendor_idx, errata_idx, CONFIG_kx) > */ > #define ALTERNATIVE_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \ > new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2) \ > _ALTERNATIVE_CFG_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \ > new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2) > > +#define ALTERNATIVE_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \ > + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \ > + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3) \ > + _ALTERNATIVE_CFG_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \ > + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \ > + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3) btw, why is this indented with spaces when the line above it is indented with tabs? (At least, that is how it appears in mutt). With those minor bits & the suggested fixes from Drew/Geert: Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Thanks, Conor. > + > #endif > -- > 2.25.1 > [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 161 bytes --] _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-12-17 21:41 UTC|newest] Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-12-12 11:54 [PATCH v5 0/6] AX45MP: Add support to non-coherent DMA Prabhakar 2022-12-12 11:54 ` Prabhakar 2022-12-12 11:55 ` [PATCH v5 1/6] riscv: asm: alternative-macros: Introduce ALTERNATIVE_3() macro Prabhakar 2022-12-12 11:55 ` Prabhakar 2022-12-12 12:32 ` Heiko Stuebner 2022-12-12 12:32 ` Heiko Stuebner 2022-12-13 17:21 ` Geert Uytterhoeven 2022-12-13 17:21 ` Geert Uytterhoeven 2022-12-13 17:49 ` Lad, Prabhakar 2022-12-13 17:49 ` Lad, Prabhakar 2022-12-14 14:34 ` Andrew Jones 2022-12-14 14:34 ` Andrew Jones 2022-12-17 21:41 ` Conor Dooley [this message] 2022-12-17 21:41 ` Conor Dooley 2022-12-19 11:15 ` Lad, Prabhakar 2022-12-19 11:15 ` Lad, Prabhakar 2022-12-19 16:22 ` Conor Dooley 2022-12-19 16:22 ` Conor Dooley 2022-12-19 16:24 ` Lad, Prabhakar 2022-12-19 16:24 ` Lad, Prabhakar 2022-12-12 11:55 ` [PATCH v5 2/6] riscv: asm: vendorid_list: Add Andes Technology to the vendors list Prabhakar 2022-12-12 11:55 ` Prabhakar 2022-12-12 11:55 ` [PATCH v5 3/6] riscv: errata: Add Andes alternative ports Prabhakar 2022-12-12 11:55 ` Prabhakar 2022-12-17 21:19 ` Conor Dooley 2022-12-17 21:19 ` Conor Dooley 2022-12-19 11:19 ` Lad, Prabhakar 2022-12-19 11:19 ` Lad, Prabhakar 2022-12-19 16:20 ` Conor Dooley 2022-12-19 16:20 ` Conor Dooley 2022-12-21 0:31 ` Lad, Prabhakar 2022-12-21 0:31 ` Lad, Prabhakar 2022-12-12 11:55 ` [PATCH v5 4/6] riscv: mm: dma-noncoherent: Pass direction and operation to ALT_CMO_OP() Prabhakar 2022-12-12 11:55 ` Prabhakar 2022-12-13 17:14 ` Geert Uytterhoeven 2022-12-13 17:14 ` Geert Uytterhoeven 2022-12-13 17:57 ` Lad, Prabhakar 2022-12-13 17:57 ` Lad, Prabhakar 2022-12-17 20:52 ` Conor Dooley 2022-12-17 20:52 ` Conor Dooley 2022-12-19 11:21 ` Lad, Prabhakar 2022-12-19 11:21 ` Lad, Prabhakar 2022-12-12 11:55 ` [PATCH v5 5/6] dt-bindings: cache: r9a07g043f-l2-cache: Add DT binding documentation for L2 cache controller Prabhakar 2022-12-12 11:55 ` Prabhakar 2022-12-12 17:28 ` Rob Herring 2022-12-12 17:28 ` Rob Herring 2022-12-12 11:55 ` [PATCH v5 6/6] soc: renesas: Add L2 cache management for RZ/Five SoC Prabhakar 2022-12-12 11:55 ` Prabhakar 2022-12-15 10:34 ` Geert Uytterhoeven 2022-12-15 10:34 ` Geert Uytterhoeven 2022-12-15 11:03 ` Lad, Prabhakar 2022-12-15 11:03 ` Lad, Prabhakar 2022-12-15 11:10 ` Geert Uytterhoeven 2022-12-15 11:10 ` Geert Uytterhoeven 2022-12-15 17:46 ` Lad, Prabhakar 2022-12-15 17:46 ` Lad, Prabhakar 2022-12-15 19:54 ` Conor Dooley 2022-12-15 19:54 ` Conor Dooley 2022-12-15 20:17 ` Geert Uytterhoeven 2022-12-15 20:17 ` Geert Uytterhoeven 2022-12-15 20:32 ` Conor Dooley 2022-12-15 20:32 ` Conor Dooley 2022-12-15 21:40 ` Palmer Dabbelt 2022-12-15 21:40 ` Palmer Dabbelt 2022-12-16 7:02 ` Christoph Hellwig 2022-12-16 7:02 ` Christoph Hellwig 2022-12-16 16:32 ` Palmer Dabbelt 2022-12-16 16:32 ` Palmer Dabbelt 2022-12-16 20:04 ` Arnd Bergmann 2022-12-16 20:04 ` Arnd Bergmann 2022-12-17 22:52 ` Conor Dooley 2022-12-17 22:52 ` Conor Dooley 2022-12-19 12:43 ` Lad, Prabhakar 2022-12-19 12:43 ` Lad, Prabhakar 2022-12-19 16:08 ` Conor Dooley 2022-12-19 16:08 ` Conor Dooley 2022-12-29 14:05 ` Arnd Bergmann 2022-12-29 14:05 ` Arnd Bergmann 2022-12-29 14:42 ` Conor Dooley 2022-12-29 14:42 ` Conor Dooley 2023-01-03 21:03 ` [RFC v5.1 0/9] Generic function based cache management operations (was Re: [PATCH v5 6/6] soc: renesas: Add L2 cache management for RZ/Five SoC) Conor Dooley 2023-01-03 21:03 ` Conor Dooley 2023-01-03 21:03 ` [RFC v5.1 1/9] riscv: asm: alternative-macros: Introduce ALTERNATIVE_3() macro Conor Dooley 2023-01-03 21:03 ` Conor Dooley 2023-01-03 21:03 ` [RFC v5.1 2/9] riscv: asm: vendorid_list: Add Andes Technology to the vendors list Conor Dooley 2023-01-03 21:03 ` Conor Dooley 2023-01-03 21:03 ` [RFC v5.1 3/9] riscv: errata: Add Andes alternative ports Conor Dooley 2023-01-03 21:03 ` Conor Dooley 2023-01-03 21:03 ` [RFC v5.1 4/9] riscv: mm: dma-noncoherent: Pass direction and operation to ALT_CMO_OP() Conor Dooley 2023-01-03 21:03 ` Conor Dooley 2023-01-03 21:03 ` [RFC v5.1 5/9] dt-bindings: cache: r9a07g043f-l2-cache: Add DT binding documentation for L2 cache controller Conor Dooley 2023-01-03 21:03 ` Conor Dooley 2023-01-03 21:03 ` [RFC v5.1 6/9] cache,soc: Move SiFive CCache driver & create drivers/cache Conor Dooley 2023-01-03 21:03 ` Conor Dooley 2023-01-04 9:50 ` Ben Dooks 2023-01-04 9:50 ` Ben Dooks 2023-01-04 10:18 ` Conor Dooley 2023-01-04 10:18 ` Conor Dooley 2023-01-03 21:03 ` [RFC v5.1 7/9] RISC-V: create a function based cache management interface Conor Dooley 2023-01-03 21:03 ` Conor Dooley 2023-01-03 21:04 ` [RFC v5.1 8/9] soc: renesas: Add L2 cache management for RZ/Five SoC Conor Dooley 2023-01-03 21:04 ` Conor Dooley 2023-01-03 21:04 ` [RFC v5.1 9/9] [DON'T APPLY] cache: sifive-ccache: add cache flushing capability Conor Dooley 2023-01-03 21:04 ` Conor Dooley 2023-01-03 21:25 ` Palmer Dabbelt 2023-01-03 21:25 ` Palmer Dabbelt 2023-01-03 21:28 ` Arnd Bergmann 2023-01-03 21:28 ` Arnd Bergmann 2023-01-04 0:00 ` Conor Dooley 2023-01-04 0:00 ` Conor Dooley 2023-01-04 8:17 ` Arnd Bergmann 2023-01-04 8:17 ` Arnd Bergmann 2023-01-04 9:23 ` Conor Dooley 2023-01-04 9:23 ` Conor Dooley 2023-01-04 10:19 ` Arnd Bergmann 2023-01-04 10:19 ` Arnd Bergmann 2023-01-04 11:56 ` Conor Dooley 2023-01-04 11:56 ` Conor Dooley 2023-01-04 12:18 ` Arnd Bergmann 2023-01-04 12:18 ` Arnd Bergmann 2023-01-04 13:20 ` Conor Dooley 2023-01-04 13:20 ` Conor Dooley 2023-01-04 14:15 ` Arnd Bergmann 2023-01-04 14:15 ` Arnd Bergmann 2023-01-04 9:45 ` Ben Dooks 2023-01-04 9:45 ` Ben Dooks 2023-01-04 9:57 ` Conor Dooley 2023-01-04 9:57 ` Conor Dooley 2022-12-17 21:35 ` [PATCH v5 6/6] soc: renesas: Add L2 cache management for RZ/Five SoC Conor Dooley 2022-12-17 21:35 ` Conor Dooley 2022-12-28 3:16 ` Samuel Holland 2022-12-28 3:16 ` Samuel Holland
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=Y543kM4070CSDtZi@spud \ --to=conor@kernel.org \ --cc=ajones@ventanamicro.com \ --cc=aou@eecs.berkeley.edu \ --cc=apatel@ventanamicro.com \ --cc=atishp@rivosinc.com \ --cc=biju.das.jz@bp.renesas.com \ --cc=conor.dooley@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=geert+renesas@glider.be \ --cc=guoren@kernel.org \ --cc=heiko@sntech.de \ --cc=jszhang@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=magnus.damm@gmail.com \ --cc=nathan@kernel.org \ --cc=palmer@dabbelt.com \ --cc=paul.walmsley@sifive.com \ --cc=philipp.tomsich@vrull.eu \ --cc=prabhakar.csengg@gmail.com \ --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \ --cc=robh+dt@kernel.org \ --cc=samuel@sholland.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.