[U-Boot] [RFC PATCH 0/4] arm: zynq: implement FPGA load from SPL

[Michal Simek <michal.simek@xilinx.com>]

Hi,

On 20.7.2018 18:17, Luis Araneda wrote:
> Hi Michal,
> 
> On Fri, Jul 20, 2018 at 6:38 AM Michal Simek <michal.simek@xilinx.com> wrote:
>> On 20.7.2018 01:37, Luis Araneda wrote:
>>> Hi Michal,
>>>
>>> On Thu, Jul 19, 2018 at 2:23 AM Michal Simek <michal.simek@xilinx.com> wrote:
>> We need that functionality first but then enable it for all boards is
>> fine for me and via one patch.
> 
> Ok
> 
>> Can you please be more specific what time1/time2 and time3 means?
> 
> The exact location of time 1/2/3 are on the attached diff file, and
> they are placed within the spl_load_simple_fit() function.
> They represent, roughly:
> - time1: Time to load the the FIT image
> - time2: Time to extract (and decompress)
>   the FPGA image from the FIT image
> - time3: Time to program the FPGA

Sorry I missed that attachment.

First of all I have sent patch for that gzip.

On zc706 with 13MB bitstream size this looks much better.

file         size (bytes) time1 time2 time3
uncompressed  13869613    2533  2694  4422
compressed -9   599149    144   765   2491

This is SD boot mode and initial time depends on SD you use.

Thanks,
Michal