Re: [PATCH v2 5/6] ARM: dts: Add generic interconnect target module node for MCAN

[Faiz Abbas <faiz_abbas@ti.com>]

Hi,

On Thursday 31 May 2018 09:36 AM, Rob Herring wrote:
> On Wed, May 30, 2018 at 07:41:32PM +0530, Faiz Abbas wrote:
>> The ti-sysc driver provides support for manipulating the idlemodes
>> and interconnect level resets.
>>
>> Add the generic interconnect target module node for MCAN to support
>> the same.
>>
>> CC: Tony Lindgren <tony@atomide.com>
>> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
>> ---
>>  arch/arm/boot/dts/dra76x.dtsi | 19 +++++++++++++++++++
>>  1 file changed, 19 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
>> index bfc82636999c..57b8dc0fe719 100644
>> --- a/arch/arm/boot/dts/dra76x.dtsi
>> +++ b/arch/arm/boot/dts/dra76x.dtsi
>> @@ -11,6 +11,25 @@
>>  / {
>>  	compatible = "ti,dra762", "ti,dra7";
>>  
>> +	ocp {
>> +
>> +		target-module@0x42c00000 {
> 
> Build your dtb with W=1 and fix warnings you add (drop '0x').

Sure, Will fix this.
> 
> This is a CAN bus controller? If so, then use 'can' for node name.

Yes but I am using m_can along the lines of dcan in other boards (For
example, see arch/arm/boot/dts/am33xx.dtsi:1046). Are you saying all CAN
controllers should only be called can?

Thanks,
Faiz