* [PATCH 1/2] drm/panfrost: missing remove opp table in case of failure
@ 2020-04-11 20:06 Clément Péron
2020-04-11 20:06 ` [PATCH 2/2] drm/panfrost: add devfreq regulator support Clément Péron
2020-04-13 13:07 ` [PATCH 1/2] drm/panfrost: missing remove opp table in case of failure Steven Price
0 siblings, 2 replies; 26+ messages in thread
From: Clément Péron @ 2020-04-11 20:06 UTC (permalink / raw)
To: Rob Herring, Tomeu Vizoso, Steven Price, Alyssa Rosenzweig,
Viresh Kumar, Nishanth Menon, Stephen Boyd
Cc: Clément Péron, linux-kernel, dri-devel
In case of failure we need to remove OPP table.
Use Linux classic error handling with goto usage.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
drivers/gpu/drm/panfrost/panfrost_devfreq.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index 413987038fbf..62541f4edd81 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -90,8 +90,11 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
cur_freq = clk_get_rate(pfdev->clock);
opp = devfreq_recommended_opp(dev, &cur_freq, 0);
- if (IS_ERR(opp))
- return PTR_ERR(opp);
+ if (IS_ERR(opp)) {
+ DRM_DEV_ERROR(dev, "Failed to set recommended OPP\n");
+ ret = PTR_ERR(opp);
+ goto err_opp;
+ }
panfrost_devfreq_profile.initial_freq = cur_freq;
dev_pm_opp_put(opp);
@@ -100,8 +103,8 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
DEVFREQ_GOV_SIMPLE_ONDEMAND, NULL);
if (IS_ERR(devfreq)) {
DRM_DEV_ERROR(dev, "Couldn't initialize GPU devfreq\n");
- dev_pm_opp_of_remove_table(dev);
- return PTR_ERR(devfreq);
+ ret = PTR_ERR(devfreq);
+ goto err_opp;
}
pfdev->devfreq.devfreq = devfreq;
@@ -112,6 +115,11 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
pfdev->devfreq.cooling = cooling;
return 0;
+
+err_opp:
+ dev_pm_opp_of_remove_table(dev);
+
+ return ret;
}
void panfrost_devfreq_fini(struct panfrost_device *pfdev)
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-11 20:06 [PATCH 1/2] drm/panfrost: missing remove opp table in case of failure Clément Péron
@ 2020-04-11 20:06 ` Clément Péron
2020-04-13 11:33 ` Clément Péron
2020-04-13 13:18 ` Steven Price
2020-04-13 13:07 ` [PATCH 1/2] drm/panfrost: missing remove opp table in case of failure Steven Price
1 sibling, 2 replies; 26+ messages in thread
From: Clément Péron @ 2020-04-11 20:06 UTC (permalink / raw)
To: Rob Herring, Tomeu Vizoso, Steven Price, Alyssa Rosenzweig,
Viresh Kumar, Nishanth Menon, Stephen Boyd
Cc: Clément Péron, linux-kernel, dri-devel
OPP table can defined both frequency and voltage.
Register the mali regulator if it exist.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
drivers/gpu/drm/panfrost/panfrost_devfreq.c | 34 ++++++++++++++++++---
drivers/gpu/drm/panfrost/panfrost_device.h | 1 +
2 files changed, 31 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index 62541f4edd81..2dc8e2355358 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -78,12 +78,26 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
struct device *dev = &pfdev->pdev->dev;
struct devfreq *devfreq;
struct thermal_cooling_device *cooling;
+ const char *mali = "mali";
+ struct opp_table *opp_table = NULL;
+
+ /* Regulator is optional */
+ opp_table = dev_pm_opp_set_regulators(dev, &mali, 1);
+ if (IS_ERR(opp_table)) {
+ ret = PTR_ERR(opp_table);
+ if (ret != -ENODEV) {
+ DRM_DEV_ERROR(dev, "Failed to set regulator: %d\n", ret);
+ return ret;
+ }
+ }
+ pfdev->devfreq.opp_table = opp_table;
ret = dev_pm_opp_of_add_table(dev);
- if (ret == -ENODEV) /* Optional, continue without devfreq */
- return 0;
- else if (ret)
- return ret;
+ if (ret) {
+ if (ret == -ENODEV) /* Optional, continue without devfreq */
+ ret = 0;
+ goto err_opp_reg;
+ }
panfrost_devfreq_reset(pfdev);
@@ -119,6 +133,12 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
err_opp:
dev_pm_opp_of_remove_table(dev);
+err_opp_reg:
+ if (pfdev->devfreq.opp_table) {
+ dev_pm_opp_put_regulators(pfdev->devfreq.opp_table);
+ pfdev->devfreq.opp_table = NULL;
+ }
+
return ret;
}
@@ -126,7 +146,13 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev)
{
if (pfdev->devfreq.cooling)
devfreq_cooling_unregister(pfdev->devfreq.cooling);
+
dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
+
+ if (pfdev->devfreq.opp_table) {
+ dev_pm_opp_put_regulators(pfdev->devfreq.opp_table);
+ pfdev->devfreq.opp_table = NULL;
+ }
}
void panfrost_devfreq_resume(struct panfrost_device *pfdev)
diff --git a/drivers/gpu/drm/panfrost/panfrost_device.h b/drivers/gpu/drm/panfrost/panfrost_device.h
index 06713811b92c..f6b0c779dfe5 100644
--- a/drivers/gpu/drm/panfrost/panfrost_device.h
+++ b/drivers/gpu/drm/panfrost/panfrost_device.h
@@ -86,6 +86,7 @@ struct panfrost_device {
struct {
struct devfreq *devfreq;
struct thermal_cooling_device *cooling;
+ struct opp_table *opp_table;
ktime_t busy_time;
ktime_t idle_time;
ktime_t time_last_update;
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-11 20:06 ` [PATCH 2/2] drm/panfrost: add devfreq regulator support Clément Péron
@ 2020-04-13 11:33 ` Clément Péron
2020-04-13 13:18 ` Steven Price
1 sibling, 0 replies; 26+ messages in thread
From: Clément Péron @ 2020-04-13 11:33 UTC (permalink / raw)
To: Rob Herring, Tomeu Vizoso, Steven Price, Alyssa Rosenzweig,
Viresh Kumar, Nishanth Menon, Stephen Boyd
Cc: linux-kernel, dri-devel
Hi Panfrost and OPP Maintainers,
On Sat, 11 Apr 2020 at 22:06, Clément Péron <peron.clem@gmail.com> wrote:
>
> OPP table can defined both frequency and voltage.
>
> Register the mali regulator if it exist.
After this patch, Panfrost update properly both voltage and frequency.
But the GPU is still not properly down-clocked when temperature is high.
I try to add a cooling map like this :
https://github.com/clementperon/linux/commit/955961c7c035abbf44e74f608fe8f059c06a2fbe
But got the following error:
[ 2.712082] panfrost 1800000.gpu: [drm:panfrost_devfreq_init
[panfrost]] Failed to register cooling device
Do you see what I'm missing?
Thanks for your help,
Clement
>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> ---
> drivers/gpu/drm/panfrost/panfrost_devfreq.c | 34 ++++++++++++++++++---
> drivers/gpu/drm/panfrost/panfrost_device.h | 1 +
> 2 files changed, 31 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> index 62541f4edd81..2dc8e2355358 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> @@ -78,12 +78,26 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> struct device *dev = &pfdev->pdev->dev;
> struct devfreq *devfreq;
> struct thermal_cooling_device *cooling;
> + const char *mali = "mali";
> + struct opp_table *opp_table = NULL;
> +
> + /* Regulator is optional */
> + opp_table = dev_pm_opp_set_regulators(dev, &mali, 1);
> + if (IS_ERR(opp_table)) {
> + ret = PTR_ERR(opp_table);
> + if (ret != -ENODEV) {
> + DRM_DEV_ERROR(dev, "Failed to set regulator: %d\n", ret);
> + return ret;
> + }
> + }
> + pfdev->devfreq.opp_table = opp_table;
>
> ret = dev_pm_opp_of_add_table(dev);
> - if (ret == -ENODEV) /* Optional, continue without devfreq */
> - return 0;
> - else if (ret)
> - return ret;
> + if (ret) {
> + if (ret == -ENODEV) /* Optional, continue without devfreq */
> + ret = 0;
> + goto err_opp_reg;
> + }
>
> panfrost_devfreq_reset(pfdev);
>
> @@ -119,6 +133,12 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> err_opp:
> dev_pm_opp_of_remove_table(dev);
>
> +err_opp_reg:
> + if (pfdev->devfreq.opp_table) {
> + dev_pm_opp_put_regulators(pfdev->devfreq.opp_table);
> + pfdev->devfreq.opp_table = NULL;
> + }
> +
> return ret;
> }
>
> @@ -126,7 +146,13 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev)
> {
> if (pfdev->devfreq.cooling)
> devfreq_cooling_unregister(pfdev->devfreq.cooling);
> +
> dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
> +
> + if (pfdev->devfreq.opp_table) {
> + dev_pm_opp_put_regulators(pfdev->devfreq.opp_table);
> + pfdev->devfreq.opp_table = NULL;
> + }
> }
>
> void panfrost_devfreq_resume(struct panfrost_device *pfdev)
> diff --git a/drivers/gpu/drm/panfrost/panfrost_device.h b/drivers/gpu/drm/panfrost/panfrost_device.h
> index 06713811b92c..f6b0c779dfe5 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_device.h
> +++ b/drivers/gpu/drm/panfrost/panfrost_device.h
> @@ -86,6 +86,7 @@ struct panfrost_device {
> struct {
> struct devfreq *devfreq;
> struct thermal_cooling_device *cooling;
> + struct opp_table *opp_table;
> ktime_t busy_time;
> ktime_t idle_time;
> ktime_t time_last_update;
> --
> 2.20.1
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 1/2] drm/panfrost: missing remove opp table in case of failure
2020-04-11 20:06 [PATCH 1/2] drm/panfrost: missing remove opp table in case of failure Clément Péron
2020-04-11 20:06 ` [PATCH 2/2] drm/panfrost: add devfreq regulator support Clément Péron
@ 2020-04-13 13:07 ` Steven Price
1 sibling, 0 replies; 26+ messages in thread
From: Steven Price @ 2020-04-13 13:07 UTC (permalink / raw)
To: Clément Péron, Rob Herring, Tomeu Vizoso,
Alyssa Rosenzweig, Viresh Kumar, Nishanth Menon, Stephen Boyd
Cc: linux-kernel, dri-devel
On 11/04/2020 21:06, Clément Péron wrote:
> In case of failure we need to remove OPP table.
>
> Use Linux classic error handling with goto usage.
>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
> ---
> drivers/gpu/drm/panfrost/panfrost_devfreq.c | 16 ++++++++++++----
> 1 file changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> index 413987038fbf..62541f4edd81 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> @@ -90,8 +90,11 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> cur_freq = clk_get_rate(pfdev->clock);
>
> opp = devfreq_recommended_opp(dev, &cur_freq, 0);
> - if (IS_ERR(opp))
> - return PTR_ERR(opp);
> + if (IS_ERR(opp)) {
> + DRM_DEV_ERROR(dev, "Failed to set recommended OPP\n");
> + ret = PTR_ERR(opp);
> + goto err_opp;
> + }
>
> panfrost_devfreq_profile.initial_freq = cur_freq;
> dev_pm_opp_put(opp);
> @@ -100,8 +103,8 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> DEVFREQ_GOV_SIMPLE_ONDEMAND, NULL);
> if (IS_ERR(devfreq)) {
> DRM_DEV_ERROR(dev, "Couldn't initialize GPU devfreq\n");
> - dev_pm_opp_of_remove_table(dev);
> - return PTR_ERR(devfreq);
> + ret = PTR_ERR(devfreq);
> + goto err_opp;
> }
> pfdev->devfreq.devfreq = devfreq;
>
> @@ -112,6 +115,11 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> pfdev->devfreq.cooling = cooling;
>
> return 0;
> +
> +err_opp:
> + dev_pm_opp_of_remove_table(dev);
> +
> + return ret;
> }
>
> void panfrost_devfreq_fini(struct panfrost_device *pfdev)
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-11 20:06 ` [PATCH 2/2] drm/panfrost: add devfreq regulator support Clément Péron
2020-04-13 11:33 ` Clément Péron
@ 2020-04-13 13:18 ` Steven Price
2020-04-13 14:18 ` Clément Péron
1 sibling, 1 reply; 26+ messages in thread
From: Steven Price @ 2020-04-13 13:18 UTC (permalink / raw)
To: Clément Péron, Rob Herring, Tomeu Vizoso,
Alyssa Rosenzweig, Viresh Kumar, Nishanth Menon, Stephen Boyd
Cc: linux-kernel, dri-devel
On 11/04/2020 21:06, Clément Péron wrote:
> OPP table can defined both frequency and voltage.
>
> Register the mali regulator if it exist.
>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> ---
> drivers/gpu/drm/panfrost/panfrost_devfreq.c | 34 ++++++++++++++++++---
> drivers/gpu/drm/panfrost/panfrost_device.h | 1 +
> 2 files changed, 31 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> index 62541f4edd81..2dc8e2355358 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> @@ -78,12 +78,26 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> struct device *dev = &pfdev->pdev->dev;
> struct devfreq *devfreq;
> struct thermal_cooling_device *cooling;
> + const char *mali = "mali";
> + struct opp_table *opp_table = NULL;
> +
> + /* Regulator is optional */
> + opp_table = dev_pm_opp_set_regulators(dev, &mali, 1);
This looks like it applies before 3e1399bccf51 ("drm/panfrost: Add
support for multiple regulators") which is currently in drm-misc-next
(and linux-next). You want something more like:
opp_table = dev_pm_opp_set_regulators(dev,
pfdev->comp->supply_names,
pfdev->comp->num_supplies);
Otherwise a platform with multiple regulators won't work correctly.
Also running on my firefly (RK3288) board I get the following warning:
debugfs: Directory 'ffa30000.gpu-mali' with parent 'vdd_gpu' already
present!
This is due to the regulator debugfs entries getting created twice (once
in panfrost_regulator_init() and once here).
I have been taking a look at doing the same thing (I picked up Martin
Blumenstingl's patch series[1]), but haven't had much time to focus on
this recently.
Thanks,
Steve
[1]
https://lore.kernel.org/dri-devel/20200112001623.2121227-1-martin.blumenstingl@googlemail.com/
> + if (IS_ERR(opp_table)) {
> + ret = PTR_ERR(opp_table);
> + if (ret != -ENODEV) {
> + DRM_DEV_ERROR(dev, "Failed to set regulator: %d\n", ret);
> + return ret;
> + }
> + }
> + pfdev->devfreq.opp_table = opp_table;
>
> ret = dev_pm_opp_of_add_table(dev);
> - if (ret == -ENODEV) /* Optional, continue without devfreq */
> - return 0;
> - else if (ret)
> - return ret;
> + if (ret) {
> + if (ret == -ENODEV) /* Optional, continue without devfreq */
> + ret = 0;
> + goto err_opp_reg;
> + }
>
> panfrost_devfreq_reset(pfdev);
>
> @@ -119,6 +133,12 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> err_opp:
> dev_pm_opp_of_remove_table(dev);
>
> +err_opp_reg:
> + if (pfdev->devfreq.opp_table) {
> + dev_pm_opp_put_regulators(pfdev->devfreq.opp_table);
> + pfdev->devfreq.opp_table = NULL;
> + }
> +
> return ret;
> }
>
> @@ -126,7 +146,13 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev)
> {
> if (pfdev->devfreq.cooling)
> devfreq_cooling_unregister(pfdev->devfreq.cooling);
> +
> dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
> +
> + if (pfdev->devfreq.opp_table) {
> + dev_pm_opp_put_regulators(pfdev->devfreq.opp_table);
> + pfdev->devfreq.opp_table = NULL;
> + }
> }
>
> void panfrost_devfreq_resume(struct panfrost_device *pfdev)
> diff --git a/drivers/gpu/drm/panfrost/panfrost_device.h b/drivers/gpu/drm/panfrost/panfrost_device.h
> index 06713811b92c..f6b0c779dfe5 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_device.h
> +++ b/drivers/gpu/drm/panfrost/panfrost_device.h
> @@ -86,6 +86,7 @@ struct panfrost_device {
> struct {
> struct devfreq *devfreq;
> struct thermal_cooling_device *cooling;
> + struct opp_table *opp_table;
> ktime_t busy_time;
> ktime_t idle_time;
> ktime_t time_last_update;
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-13 13:18 ` Steven Price
@ 2020-04-13 14:18 ` Clément Péron
2020-04-13 14:31 ` Clément Péron
2020-04-14 13:09 ` Robin Murphy
0 siblings, 2 replies; 26+ messages in thread
From: Clément Péron @ 2020-04-13 14:18 UTC (permalink / raw)
To: Steven Price
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
linux-kernel, dri-devel, Alyssa Rosenzweig
Hi Steven,
On Mon, 13 Apr 2020 at 15:18, Steven Price <steven.price@arm.com> wrote:
>
> On 11/04/2020 21:06, Clément Péron wrote:
> > OPP table can defined both frequency and voltage.
> >
> > Register the mali regulator if it exist.
> >
> > Signed-off-by: Clément Péron <peron.clem@gmail.com>
> > ---
> > drivers/gpu/drm/panfrost/panfrost_devfreq.c | 34 ++++++++++++++++++---
> > drivers/gpu/drm/panfrost/panfrost_device.h | 1 +
> > 2 files changed, 31 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > index 62541f4edd81..2dc8e2355358 100644
> > --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > @@ -78,12 +78,26 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> > struct device *dev = &pfdev->pdev->dev;
> > struct devfreq *devfreq;
> > struct thermal_cooling_device *cooling;
> > + const char *mali = "mali";
> > + struct opp_table *opp_table = NULL;
> > +
> > + /* Regulator is optional */
> > + opp_table = dev_pm_opp_set_regulators(dev, &mali, 1);
>
> This looks like it applies before 3e1399bccf51 ("drm/panfrost: Add
> support for multiple regulators") which is currently in drm-misc-next
> (and linux-next). You want something more like:
Thanks for you review, indeed I didn't see that multiple regulators
support has been added.
Will update in v2.
>
> opp_table = dev_pm_opp_set_regulators(dev,
> pfdev->comp->supply_names,
> pfdev->comp->num_supplies);
>
> Otherwise a platform with multiple regulators won't work correctly.
>
> Also running on my firefly (RK3288) board I get the following warning:
>
> debugfs: Directory 'ffa30000.gpu-mali' with parent 'vdd_gpu' already
> present!
>
> This is due to the regulator debugfs entries getting created twice (once
> in panfrost_regulator_init() and once here).
Is it a warning that should be consider as an error? Look's more an info no?
What should be the correct behavior if a device want to register two
times the same regulator?
Link to original discussion:
https://lore.kernel.org/patchwork/patch/1176717/
Thanks,
Clement
>
> I have been taking a look at doing the same thing (I picked up Martin
> Blumenstingl's patch series[1]), but haven't had much time to focus on
> this recently.
>
> Thanks,
>
> Steve
>
> [1]
> https://lore.kernel.org/dri-devel/20200112001623.2121227-1-martin.blumenstingl@googlemail.com/
>
>
> > + if (IS_ERR(opp_table)) {
> > + ret = PTR_ERR(opp_table);
> > + if (ret != -ENODEV) {
> > + DRM_DEV_ERROR(dev, "Failed to set regulator: %d\n", ret);
> > + return ret;
> > + }
> > + }
> > + pfdev->devfreq.opp_table = opp_table;
> >
> > ret = dev_pm_opp_of_add_table(dev);
> > - if (ret == -ENODEV) /* Optional, continue without devfreq */
> > - return 0;
> > - else if (ret)
> > - return ret;
> > + if (ret) {
> > + if (ret == -ENODEV) /* Optional, continue without devfreq */
> > + ret = 0;
> > + goto err_opp_reg;
> > + }
> >
> > panfrost_devfreq_reset(pfdev);
> >
> > @@ -119,6 +133,12 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> > err_opp:
> > dev_pm_opp_of_remove_table(dev);
> >
> > +err_opp_reg:
> > + if (pfdev->devfreq.opp_table) {
> > + dev_pm_opp_put_regulators(pfdev->devfreq.opp_table);
> > + pfdev->devfreq.opp_table = NULL;
> > + }
> > +
> > return ret;
> > }
> >
> > @@ -126,7 +146,13 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev)
> > {
> > if (pfdev->devfreq.cooling)
> > devfreq_cooling_unregister(pfdev->devfreq.cooling);
> > +
> > dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
> > +
> > + if (pfdev->devfreq.opp_table) {
> > + dev_pm_opp_put_regulators(pfdev->devfreq.opp_table);
> > + pfdev->devfreq.opp_table = NULL;
> > + }
> > }
> >
> > void panfrost_devfreq_resume(struct panfrost_device *pfdev)
> > diff --git a/drivers/gpu/drm/panfrost/panfrost_device.h b/drivers/gpu/drm/panfrost/panfrost_device.h
> > index 06713811b92c..f6b0c779dfe5 100644
> > --- a/drivers/gpu/drm/panfrost/panfrost_device.h
> > +++ b/drivers/gpu/drm/panfrost/panfrost_device.h
> > @@ -86,6 +86,7 @@ struct panfrost_device {
> > struct {
> > struct devfreq *devfreq;
> > struct thermal_cooling_device *cooling;
> > + struct opp_table *opp_table;
> > ktime_t busy_time;
> > ktime_t idle_time;
> > ktime_t time_last_update;
> >
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-13 14:18 ` Clément Péron
@ 2020-04-13 14:31 ` Clément Péron
2020-04-13 15:55 ` Steven Price
2020-04-14 13:09 ` Robin Murphy
1 sibling, 1 reply; 26+ messages in thread
From: Clément Péron @ 2020-04-13 14:31 UTC (permalink / raw)
To: Steven Price
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
linux-kernel, dri-devel, Alyssa Rosenzweig
Hi,
On Mon, 13 Apr 2020 at 16:18, Clément Péron <peron.clem@gmail.com> wrote:
>
> Hi Steven,
>
> On Mon, 13 Apr 2020 at 15:18, Steven Price <steven.price@arm.com> wrote:
> >
> > On 11/04/2020 21:06, Clément Péron wrote:
> > > OPP table can defined both frequency and voltage.
> > >
> > > Register the mali regulator if it exist.
> > >
> > > Signed-off-by: Clément Péron <peron.clem@gmail.com>
> > > ---
> > > drivers/gpu/drm/panfrost/panfrost_devfreq.c | 34 ++++++++++++++++++---
> > > drivers/gpu/drm/panfrost/panfrost_device.h | 1 +
> > > 2 files changed, 31 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > > index 62541f4edd81..2dc8e2355358 100644
> > > --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > > +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > > @@ -78,12 +78,26 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> > > struct device *dev = &pfdev->pdev->dev;
> > > struct devfreq *devfreq;
> > > struct thermal_cooling_device *cooling;
> > > + const char *mali = "mali";
> > > + struct opp_table *opp_table = NULL;
> > > +
> > > + /* Regulator is optional */
> > > + opp_table = dev_pm_opp_set_regulators(dev, &mali, 1);
> >
> > This looks like it applies before 3e1399bccf51 ("drm/panfrost: Add
> > support for multiple regulators") which is currently in drm-misc-next
> > (and linux-next). You want something more like:
>
> Thanks for you review, indeed I didn't see that multiple regulators
> support has been added.
> Will update in v2.
>
> >
> > opp_table = dev_pm_opp_set_regulators(dev,
> > pfdev->comp->supply_names,
> > pfdev->comp->num_supplies);
> >
> > Otherwise a platform with multiple regulators won't work correctly.
> >
> > Also running on my firefly (RK3288) board I get the following warning:
> >
> > debugfs: Directory 'ffa30000.gpu-mali' with parent 'vdd_gpu' already
> > present!
> >
> > This is due to the regulator debugfs entries getting created twice (once
> > in panfrost_regulator_init() and once here).
>
> Is it a warning that should be consider as an error? Look's more an info no?
> What should be the correct behavior if a device want to register two
> times the same regulator?
Or we can change the name from vdd_XXX to opp_vdd_XXX ?
https://elixir.bootlin.com/linux/latest/source/drivers/opp/debugfs.c#L45
>
> Link to original discussion:
> https://lore.kernel.org/patchwork/patch/1176717/
>
> Thanks,
> Clement
>
> >
> > I have been taking a look at doing the same thing (I picked up Martin
> > Blumenstingl's patch series[1]), but haven't had much time to focus on
> > this recently.
> >
> > Thanks,
> >
> > Steve
> >
> > [1]
> > https://lore.kernel.org/dri-devel/20200112001623.2121227-1-martin.blumenstingl@googlemail.com/
> >
> >
> > > + if (IS_ERR(opp_table)) {
> > > + ret = PTR_ERR(opp_table);
> > > + if (ret != -ENODEV) {
> > > + DRM_DEV_ERROR(dev, "Failed to set regulator: %d\n", ret);
> > > + return ret;
> > > + }
> > > + }
> > > + pfdev->devfreq.opp_table = opp_table;
> > >
> > > ret = dev_pm_opp_of_add_table(dev);
> > > - if (ret == -ENODEV) /* Optional, continue without devfreq */
> > > - return 0;
> > > - else if (ret)
> > > - return ret;
> > > + if (ret) {
> > > + if (ret == -ENODEV) /* Optional, continue without devfreq */
> > > + ret = 0;
> > > + goto err_opp_reg;
> > > + }
> > >
> > > panfrost_devfreq_reset(pfdev);
> > >
> > > @@ -119,6 +133,12 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> > > err_opp:
> > > dev_pm_opp_of_remove_table(dev);
> > >
> > > +err_opp_reg:
> > > + if (pfdev->devfreq.opp_table) {
> > > + dev_pm_opp_put_regulators(pfdev->devfreq.opp_table);
> > > + pfdev->devfreq.opp_table = NULL;
> > > + }
> > > +
> > > return ret;
> > > }
> > >
> > > @@ -126,7 +146,13 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev)
> > > {
> > > if (pfdev->devfreq.cooling)
> > > devfreq_cooling_unregister(pfdev->devfreq.cooling);
> > > +
> > > dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
> > > +
> > > + if (pfdev->devfreq.opp_table) {
> > > + dev_pm_opp_put_regulators(pfdev->devfreq.opp_table);
> > > + pfdev->devfreq.opp_table = NULL;
> > > + }
> > > }
> > >
> > > void panfrost_devfreq_resume(struct panfrost_device *pfdev)
> > > diff --git a/drivers/gpu/drm/panfrost/panfrost_device.h b/drivers/gpu/drm/panfrost/panfrost_device.h
> > > index 06713811b92c..f6b0c779dfe5 100644
> > > --- a/drivers/gpu/drm/panfrost/panfrost_device.h
> > > +++ b/drivers/gpu/drm/panfrost/panfrost_device.h
> > > @@ -86,6 +86,7 @@ struct panfrost_device {
> > > struct {
> > > struct devfreq *devfreq;
> > > struct thermal_cooling_device *cooling;
> > > + struct opp_table *opp_table;
> > > ktime_t busy_time;
> > > ktime_t idle_time;
> > > ktime_t time_last_update;
> > >
> >
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-13 14:31 ` Clément Péron
@ 2020-04-13 15:55 ` Steven Price
2020-04-13 16:35 ` Clément Péron
0 siblings, 1 reply; 26+ messages in thread
From: Steven Price @ 2020-04-13 15:55 UTC (permalink / raw)
To: Clément Péron
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
linux-kernel, dri-devel, Alyssa Rosenzweig
On 13/04/2020 15:31, Clément Péron wrote:
> Hi,
>
> On Mon, 13 Apr 2020 at 16:18, Clément Péron <peron.clem@gmail.com> wrote:
>>
>> Hi Steven,
>>
>> On Mon, 13 Apr 2020 at 15:18, Steven Price <steven.price@arm.com> wrote:
>>>
>>> On 11/04/2020 21:06, Clément Péron wrote:
>>>> OPP table can defined both frequency and voltage.
>>>>
>>>> Register the mali regulator if it exist.
>>>>
>>>> Signed-off-by: Clément Péron <peron.clem@gmail.com>
>>>> ---
>>>> drivers/gpu/drm/panfrost/panfrost_devfreq.c | 34 ++++++++++++++++++---
>>>> drivers/gpu/drm/panfrost/panfrost_device.h | 1 +
>>>> 2 files changed, 31 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
>>>> index 62541f4edd81..2dc8e2355358 100644
>>>> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
>>>> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
>>>> @@ -78,12 +78,26 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
>>>> struct device *dev = &pfdev->pdev->dev;
>>>> struct devfreq *devfreq;
>>>> struct thermal_cooling_device *cooling;
>>>> + const char *mali = "mali";
>>>> + struct opp_table *opp_table = NULL;
>>>> +
>>>> + /* Regulator is optional */
>>>> + opp_table = dev_pm_opp_set_regulators(dev, &mali, 1);
>>>
>>> This looks like it applies before 3e1399bccf51 ("drm/panfrost: Add
>>> support for multiple regulators") which is currently in drm-misc-next
>>> (and linux-next). You want something more like:
>>
>> Thanks for you review, indeed I didn't see that multiple regulators
>> support has been added.
>> Will update in v2.
>>
>>>
>>> opp_table = dev_pm_opp_set_regulators(dev,
>>> pfdev->comp->supply_names,
>>> pfdev->comp->num_supplies);
>>>
>>> Otherwise a platform with multiple regulators won't work correctly.
>>>
>>> Also running on my firefly (RK3288) board I get the following warning:
>>>
>>> debugfs: Directory 'ffa30000.gpu-mali' with parent 'vdd_gpu' already
>>> present!
>>>
>>> This is due to the regulator debugfs entries getting created twice (once
>>> in panfrost_regulator_init() and once here).
>>
>> Is it a warning that should be consider as an error? Look's more an info no?
>> What should be the correct behavior if a device want to register two
>> times the same regulator?
>
> Or we can change the name from vdd_XXX to opp_vdd_XXX ?
> https://elixir.bootlin.com/linux/latest/source/drivers/opp/debugfs.c#L45
Yes, I'm not sure that it's actually a problem in practice. And it may
well be correct to change this in the generic code rather than try to
work around it in Panfrost. But we shouldn't spam the user with warnings
as that makes real issues harder to see.
Your suggestion to change the name seems reasonable to me, but I don't
fully understand the opp code, so we'd need some review from the OPP
maintainers. Hopefully Viresh, Nishanth or Stephen can provide some insight.
Steve
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-13 15:55 ` Steven Price
@ 2020-04-13 16:35 ` Clément Péron
2020-04-13 17:28 ` Clément Péron
0 siblings, 1 reply; 26+ messages in thread
From: Clément Péron @ 2020-04-13 16:35 UTC (permalink / raw)
To: Steven Price
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
linux-kernel, dri-devel, Alyssa Rosenzweig
Hi Steven,
On Mon, 13 Apr 2020 at 17:55, Steven Price <steven.price@arm.com> wrote:
>
> On 13/04/2020 15:31, Clément Péron wrote:
> > Hi,
> >
> > On Mon, 13 Apr 2020 at 16:18, Clément Péron <peron.clem@gmail.com> wrote:
> >>
> >> Hi Steven,
> >>
> >> On Mon, 13 Apr 2020 at 15:18, Steven Price <steven.price@arm.com> wrote:
> >>>
> >>> On 11/04/2020 21:06, Clément Péron wrote:
> >>>> OPP table can defined both frequency and voltage.
> >>>>
> >>>> Register the mali regulator if it exist.
> >>>>
> >>>> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> >>>> ---
> >>>> drivers/gpu/drm/panfrost/panfrost_devfreq.c | 34 ++++++++++++++++++---
> >>>> drivers/gpu/drm/panfrost/panfrost_device.h | 1 +
> >>>> 2 files changed, 31 insertions(+), 4 deletions(-)
> >>>>
> >>>> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> >>>> index 62541f4edd81..2dc8e2355358 100644
> >>>> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> >>>> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> >>>> @@ -78,12 +78,26 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> >>>> struct device *dev = &pfdev->pdev->dev;
> >>>> struct devfreq *devfreq;
> >>>> struct thermal_cooling_device *cooling;
> >>>> + const char *mali = "mali";
> >>>> + struct opp_table *opp_table = NULL;
> >>>> +
> >>>> + /* Regulator is optional */
> >>>> + opp_table = dev_pm_opp_set_regulators(dev, &mali, 1);
> >>>
> >>> This looks like it applies before 3e1399bccf51 ("drm/panfrost: Add
> >>> support for multiple regulators") which is currently in drm-misc-next
> >>> (and linux-next). You want something more like:
> >>
> >> Thanks for you review, indeed I didn't see that multiple regulators
> >> support has been added.
> >> Will update in v2.
> >>
> >>>
> >>> opp_table = dev_pm_opp_set_regulators(dev,
> >>> pfdev->comp->supply_names,
> >>> pfdev->comp->num_supplies);
> >>>
> >>> Otherwise a platform with multiple regulators won't work correctly.
> >>>
> >>> Also running on my firefly (RK3288) board I get the following warning:
> >>>
> >>> debugfs: Directory 'ffa30000.gpu-mali' with parent 'vdd_gpu' already
> >>> present!
> >>>
> >>> This is due to the regulator debugfs entries getting created twice (once
> >>> in panfrost_regulator_init() and once here).
> >>
> >> Is it a warning that should be consider as an error? Look's more an info no?
> >> What should be the correct behavior if a device want to register two
> >> times the same regulator?
> >
> > Or we can change the name from vdd_XXX to opp_vdd_XXX ?
> > https://elixir.bootlin.com/linux/latest/source/drivers/opp/debugfs.c#L45
>
> Yes, I'm not sure that it's actually a problem in practice. And it may
> well be correct to change this in the generic code rather than try to
> work around it in Panfrost. But we shouldn't spam the user with warnings
> as that makes real issues harder to see.
>
> Your suggestion to change the name seems reasonable to me, but I don't
> fully understand the opp code, so we'd need some review from the OPP
> maintainers. Hopefully Viresh, Nishanth or Stephen can provide some insight.
Agree, I will send a v2 with the rename and see if OPP Maintainers agree.
Regards,
Clement
>
> Steve
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-13 16:35 ` Clément Péron
@ 2020-04-13 17:28 ` Clément Péron
2020-04-14 13:10 ` Steven Price
0 siblings, 1 reply; 26+ messages in thread
From: Clément Péron @ 2020-04-13 17:28 UTC (permalink / raw)
To: Steven Price
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
linux-kernel, dri-devel, Alyssa Rosenzweig
Hi Steven,
On Mon, 13 Apr 2020 at 18:35, Clément Péron <peron.clem@gmail.com> wrote:
>
> Hi Steven,
>
> On Mon, 13 Apr 2020 at 17:55, Steven Price <steven.price@arm.com> wrote:
> >
> > On 13/04/2020 15:31, Clément Péron wrote:
> > > Hi,
> > >
> > > On Mon, 13 Apr 2020 at 16:18, Clément Péron <peron.clem@gmail.com> wrote:
> > >>
> > >> Hi Steven,
> > >>
> > >> On Mon, 13 Apr 2020 at 15:18, Steven Price <steven.price@arm.com> wrote:
> > >>>
> > >>> On 11/04/2020 21:06, Clément Péron wrote:
> > >>>> OPP table can defined both frequency and voltage.
> > >>>>
> > >>>> Register the mali regulator if it exist.
> > >>>>
> > >>>> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> > >>>> ---
> > >>>> drivers/gpu/drm/panfrost/panfrost_devfreq.c | 34 ++++++++++++++++++---
> > >>>> drivers/gpu/drm/panfrost/panfrost_device.h | 1 +
> > >>>> 2 files changed, 31 insertions(+), 4 deletions(-)
> > >>>>
> > >>>> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > >>>> index 62541f4edd81..2dc8e2355358 100644
> > >>>> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > >>>> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > >>>> @@ -78,12 +78,26 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> > >>>> struct device *dev = &pfdev->pdev->dev;
> > >>>> struct devfreq *devfreq;
> > >>>> struct thermal_cooling_device *cooling;
> > >>>> + const char *mali = "mali";
> > >>>> + struct opp_table *opp_table = NULL;
> > >>>> +
> > >>>> + /* Regulator is optional */
> > >>>> + opp_table = dev_pm_opp_set_regulators(dev, &mali, 1);
> > >>>
> > >>> This looks like it applies before 3e1399bccf51 ("drm/panfrost: Add
> > >>> support for multiple regulators") which is currently in drm-misc-next
> > >>> (and linux-next). You want something more like:
> > >>
> > >> Thanks for you review, indeed I didn't see that multiple regulators
> > >> support has been added.
> > >> Will update in v2.
> > >>
> > >>>
> > >>> opp_table = dev_pm_opp_set_regulators(dev,
> > >>> pfdev->comp->supply_names,
> > >>> pfdev->comp->num_supplies);
> > >>>
> > >>> Otherwise a platform with multiple regulators won't work correctly.
> > >>>
> > >>> Also running on my firefly (RK3288) board I get the following warning:
> > >>>
> > >>> debugfs: Directory 'ffa30000.gpu-mali' with parent 'vdd_gpu' already
> > >>> present!
I try to reproduce but it can't
regulator is mount at :
./regulator/vdd-gpu
whereas OPP is mount :
./opp/soc-1800000.gpu/opp:756000000/supply-0/
I see that firefly as 2 regulators with the same name :
vdd_gpu from syr828
(https://github.com/mopplayer/Firefly-RK3288-Kernel-With-Mali764/blob/master/arch/arm/boot/dts/firefly-rk3288.dts#L453)
vdd_gpu from rk808_dcdc2_reg
(https://github.com/mopplayer/Firefly-RK3288-Kernel-With-Mali764/blob/master/arch/arm/boot/dts/firefly-rk3288.dts#L841)
So i think the issue is from the firefly device-tree.
Regards,
Clement
> > >>>
> > >>> This is due to the regulator debugfs entries getting created twice (once
> > >>> in panfrost_regulator_init() and once here).
> > >>
> > >> Is it a warning that should be consider as an error? Look's more an info no?
> > >> What should be the correct behavior if a device want to register two
> > >> times the same regulator?
> > >
> > > Or we can change the name from vdd_XXX to opp_vdd_XXX ?
> > > https://elixir.bootlin.com/linux/latest/source/drivers/opp/debugfs.c#L45
> >
> > Yes, I'm not sure that it's actually a problem in practice. And it may
> > well be correct to change this in the generic code rather than try to
> > work around it in Panfrost. But we shouldn't spam the user with warnings
> > as that makes real issues harder to see.
> >
> > Your suggestion to change the name seems reasonable to me, but I don't
> > fully understand the opp code, so we'd need some review from the OPP
> > maintainers. Hopefully Viresh, Nishanth or Stephen can provide some insight.
>
> Agree, I will send a v2 with the rename and see if OPP Maintainers agree.
>
> Regards,
> Clement
>
> >
> > Steve
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-13 14:18 ` Clément Péron
2020-04-13 14:31 ` Clément Péron
@ 2020-04-14 13:09 ` Robin Murphy
1 sibling, 0 replies; 26+ messages in thread
From: Robin Murphy @ 2020-04-14 13:09 UTC (permalink / raw)
To: Clément Péron, Steven Price
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
linux-kernel, dri-devel, Alyssa Rosenzweig
On 2020-04-13 3:18 pm, Clément Péron wrote:
> Hi Steven,
>
> On Mon, 13 Apr 2020 at 15:18, Steven Price <steven.price@arm.com> wrote:
>>
>> On 11/04/2020 21:06, Clément Péron wrote:
>>> OPP table can defined both frequency and voltage.
>>>
>>> Register the mali regulator if it exist.
>>>
>>> Signed-off-by: Clément Péron <peron.clem@gmail.com>
>>> ---
>>> drivers/gpu/drm/panfrost/panfrost_devfreq.c | 34 ++++++++++++++++++---
>>> drivers/gpu/drm/panfrost/panfrost_device.h | 1 +
>>> 2 files changed, 31 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
>>> index 62541f4edd81..2dc8e2355358 100644
>>> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
>>> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
>>> @@ -78,12 +78,26 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
>>> struct device *dev = &pfdev->pdev->dev;
>>> struct devfreq *devfreq;
>>> struct thermal_cooling_device *cooling;
>>> + const char *mali = "mali";
>>> + struct opp_table *opp_table = NULL;
>>> +
>>> + /* Regulator is optional */
>>> + opp_table = dev_pm_opp_set_regulators(dev, &mali, 1);
>>
>> This looks like it applies before 3e1399bccf51 ("drm/panfrost: Add
>> support for multiple regulators") which is currently in drm-misc-next
>> (and linux-next). You want something more like:
>
> Thanks for you review, indeed I didn't see that multiple regulators
> support has been added.
> Will update in v2.
Although note that we probably also want a version that can be
backported to stable without that dependency, since this behaviour is
arguably a regression since 221bc77914cb ("drm/panfrost: Use generic
code for devfreq"), and does appear to have been causing subtle problems
for users.
Robin.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-13 17:28 ` Clément Péron
@ 2020-04-14 13:10 ` Steven Price
2020-04-14 18:20 ` Clément Péron
2020-05-02 22:07 ` Clément Péron
0 siblings, 2 replies; 26+ messages in thread
From: Steven Price @ 2020-04-14 13:10 UTC (permalink / raw)
To: Clément Péron
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
linux-kernel, dri-devel, Alyssa Rosenzweig
Hi Clément,
On 13/04/2020 18:28, Clément Péron wrote:
> Hi Steven,
>
> On Mon, 13 Apr 2020 at 18:35, Clément Péron <peron.clem@gmail.com> wrote:
>>
>> Hi Steven,
>>
>> On Mon, 13 Apr 2020 at 17:55, Steven Price <steven.price@arm.com> wrote:
>>>
>>> On 13/04/2020 15:31, Clément Péron wrote:
>>>> Hi,
>>>>
>>>> On Mon, 13 Apr 2020 at 16:18, Clément Péron <peron.clem@gmail.com> wrote:
>>>>>
>>>>> Hi Steven,
>>>>>
>>>>> On Mon, 13 Apr 2020 at 15:18, Steven Price <steven.price@arm.com> wrote:
>>>>>>
>>>>>> On 11/04/2020 21:06, Clément Péron wrote:
>>>>>>> OPP table can defined both frequency and voltage.
>>>>>>>
>>>>>>> Register the mali regulator if it exist.
>>>>>>>
>>>>>>> Signed-off-by: Clément Péron <peron.clem@gmail.com>
>>>>>>> ---
>>>>>>> drivers/gpu/drm/panfrost/panfrost_devfreq.c | 34 ++++++++++++++++++---
>>>>>>> drivers/gpu/drm/panfrost/panfrost_device.h | 1 +
>>>>>>> 2 files changed, 31 insertions(+), 4 deletions(-)
>>>>>>>
>>>>>>> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
>>>>>>> index 62541f4edd81..2dc8e2355358 100644
>>>>>>> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
>>>>>>> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
>>>>>>> @@ -78,12 +78,26 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
>>>>>>> struct device *dev = &pfdev->pdev->dev;
>>>>>>> struct devfreq *devfreq;
>>>>>>> struct thermal_cooling_device *cooling;
>>>>>>> + const char *mali = "mali";
>>>>>>> + struct opp_table *opp_table = NULL;
>>>>>>> +
>>>>>>> + /* Regulator is optional */
>>>>>>> + opp_table = dev_pm_opp_set_regulators(dev, &mali, 1);
>>>>>>
>>>>>> This looks like it applies before 3e1399bccf51 ("drm/panfrost: Add
>>>>>> support for multiple regulators") which is currently in drm-misc-next
>>>>>> (and linux-next). You want something more like:
>>>>>
>>>>> Thanks for you review, indeed I didn't see that multiple regulators
>>>>> support has been added.
>>>>> Will update in v2.
>>>>>
>>>>>>
>>>>>> opp_table = dev_pm_opp_set_regulators(dev,
>>>>>> pfdev->comp->supply_names,
>>>>>> pfdev->comp->num_supplies);
>>>>>>
>>>>>> Otherwise a platform with multiple regulators won't work correctly.
>>>>>>
>>>>>> Also running on my firefly (RK3288) board I get the following warning:
>>>>>>
>>>>>> debugfs: Directory 'ffa30000.gpu-mali' with parent 'vdd_gpu' already
>>>>>> present!
>
> I try to reproduce but it can't
> regulator is mount at :
> ./regulator/vdd-gpu
> whereas OPP is mount :
> ./opp/soc-1800000.gpu/opp:756000000/supply-0/
Getting a backtrace from the two occurrences, I see one added from:
(debugfs_create_dir) from [<c04633f8>] (create_regulator+0xe0/0x220)
(create_regulator) from [<c04681d8>] (_regulator_get+0x168/0x204)
(_regulator_get) from [<c04682e0>] (regulator_bulk_get+0x64/0xf4)
(regulator_bulk_get) from [<c04696f0>]
(devm_regulator_bulk_get+0x40/0x74)
(devm_regulator_bulk_get) from [<bf00af44>]
(panfrost_device_init+0x1b4/0x48c [panfrost])
(panfrost_device_init [panfrost]) from [<bf00a4d4>]
(panfrost_probe+0x94/0x184 [panfrost])
(panfrost_probe [panfrost]) from [<c04ee694>]
(platform_drv_probe+0x48/0x94)
And the other:
(debugfs_create_dir) from [<c04633f8>] (create_regulator+0xe0/0x220)
(create_regulator) from [<c04681d8>] (_regulator_get+0x168/0x204)
(_regulator_get) from [<c05c1280>] (dev_pm_opp_set_regulators+0x6c/0x184)
(dev_pm_opp_set_regulators) from [<bf00b4ac>]
(panfrost_devfreq_init+0x38/0x1ac [panfrost])
(panfrost_devfreq_init [panfrost]) from [<bf00a508>]
(panfrost_probe+0xc8/0x184 [panfrost])
(panfrost_probe [panfrost]) from [<c04ee694>]
(platform_drv_probe+0x48/0x94)
Both are created at /regulator/vdd_gpu
>
> I see that firefly as 2 regulators with the same name :
> vdd_gpu from syr828
> (https://github.com/mopplayer/Firefly-RK3288-Kernel-With-Mali764/blob/master/arch/arm/boot/dts/firefly-rk3288.dts#L453)
> vdd_gpu from rk808_dcdc2_reg
> (https://github.com/mopplayer/Firefly-RK3288-Kernel-With-Mali764/blob/master/arch/arm/boot/dts/firefly-rk3288.dts#L841)
>
> So i think the issue is from the firefly device-tree.
I'm using the DTB from the kernel tree
(/arch/arm/boot/dts/rk3288-firefly.dts) which as far as I can see
doesn't contain this problem. Certainly decompiling the DTB I can see
only one mention of vdd_gpu (in syr828).
Steve
>
> Regards,
> Clement
>
>>>>>>
>>>>>> This is due to the regulator debugfs entries getting created twice (once
>>>>>> in panfrost_regulator_init() and once here).
>>>>>
>>>>> Is it a warning that should be consider as an error? Look's more an info no?
>>>>> What should be the correct behavior if a device want to register two
>>>>> times the same regulator?
>>>>
>>>> Or we can change the name from vdd_XXX to opp_vdd_XXX ?
>>>> https://elixir.bootlin.com/linux/latest/source/drivers/opp/debugfs.c#L45
>>>
>>> Yes, I'm not sure that it's actually a problem in practice. And it may
>>> well be correct to change this in the generic code rather than try to
>>> work around it in Panfrost. But we shouldn't spam the user with warnings
>>> as that makes real issues harder to see.
>>>
>>> Your suggestion to change the name seems reasonable to me, but I don't
>>> fully understand the opp code, so we'd need some review from the OPP
>>> maintainers. Hopefully Viresh, Nishanth or Stephen can provide some insight.
>>
>> Agree, I will send a v2 with the rename and see if OPP Maintainers agree.
>>
>> Regards,
>> Clement
>>
>>>
>>> Steve
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-14 13:10 ` Steven Price
@ 2020-04-14 18:20 ` Clément Péron
2020-04-14 18:55 ` Mark Brown
2020-05-02 22:07 ` Clément Péron
1 sibling, 1 reply; 26+ messages in thread
From: Clément Péron @ 2020-04-14 18:20 UTC (permalink / raw)
To: Steven Price, Liam Girdwood, Mark Brown
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
linux-kernel, dri-devel, Alyssa Rosenzweig
Hi Liam and Mark,
On Tue, 14 Apr 2020 at 15:10, Steven Price <steven.price@arm.com> wrote:
>
> Hi Clément,
>
> On 13/04/2020 18:28, Clément Péron wrote:
> > Hi Steven,
> >
> > On Mon, 13 Apr 2020 at 18:35, Clément Péron <peron.clem@gmail.com> wrote:
> >>
> >> Hi Steven,
> >>
> >> On Mon, 13 Apr 2020 at 17:55, Steven Price <steven.price@arm.com> wrote:
> >>>
> >>> On 13/04/2020 15:31, Clément Péron wrote:
> >>>> Hi,
> >>>>
> >>>> On Mon, 13 Apr 2020 at 16:18, Clément Péron <peron.clem@gmail.com> wrote:
> >>>>>
> >>>>> Hi Steven,
> >>>>>
> >>>>> On Mon, 13 Apr 2020 at 15:18, Steven Price <steven.price@arm.com> wrote:
> >>>>>>
> >>>>>> On 11/04/2020 21:06, Clément Péron wrote:
> >>>>>>> OPP table can defined both frequency and voltage.
> >>>>>>>
> >>>>>>> Register the mali regulator if it exist.
> >>>>>>>
> >>>>>>> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> >>>>>>> ---
> >>>>>>> drivers/gpu/drm/panfrost/panfrost_devfreq.c | 34 ++++++++++++++++++---
> >>>>>>> drivers/gpu/drm/panfrost/panfrost_device.h | 1 +
> >>>>>>> 2 files changed, 31 insertions(+), 4 deletions(-)
> >>>>>>>
> >>>>>>> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> >>>>>>> index 62541f4edd81..2dc8e2355358 100644
> >>>>>>> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> >>>>>>> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> >>>>>>> @@ -78,12 +78,26 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
> >>>>>>> struct device *dev = &pfdev->pdev->dev;
> >>>>>>> struct devfreq *devfreq;
> >>>>>>> struct thermal_cooling_device *cooling;
> >>>>>>> + const char *mali = "mali";
> >>>>>>> + struct opp_table *opp_table = NULL;
> >>>>>>> +
> >>>>>>> + /* Regulator is optional */
> >>>>>>> + opp_table = dev_pm_opp_set_regulators(dev, &mali, 1);
> >>>>>>
> >>>>>> This looks like it applies before 3e1399bccf51 ("drm/panfrost: Add
> >>>>>> support for multiple regulators") which is currently in drm-misc-next
> >>>>>> (and linux-next). You want something more like:
> >>>>>
> >>>>> Thanks for you review, indeed I didn't see that multiple regulators
> >>>>> support has been added.
> >>>>> Will update in v2.
> >>>>>
> >>>>>>
> >>>>>> opp_table = dev_pm_opp_set_regulators(dev,
> >>>>>> pfdev->comp->supply_names,
> >>>>>> pfdev->comp->num_supplies);
> >>>>>>
> >>>>>> Otherwise a platform with multiple regulators won't work correctly.
> >>>>>>
> >>>>>> Also running on my firefly (RK3288) board I get the following warning:
> >>>>>>
> >>>>>> debugfs: Directory 'ffa30000.gpu-mali' with parent 'vdd_gpu' already
> >>>>>> present!
> >
> > I try to reproduce but it can't
Sorry, you're right I have indeed the same issue:
[ 2.903406] panfrost 1800000.gpu: Features: L2:0x07110206
Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf
JS:0x7
[ 2.913297] sunxi-ir 7040000.ir: initialized sunXi IR driver
[ 2.919901] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1
[ 2.920497] panfrost 1800000.gpu: Looking up mali-supply from device tree
[ 3.036568] vdd-gpu: could not add device link 1800000.gpu err -17
[ 3.036580] debugfs: Directory '1800000.gpu-mali' with parent
'vdd-gpu' already present!
[ 3.046312] panfrost 1800000.gpu: [drm:panfrost_devfreq_init
[panfrost]] Failed to register cooling device
[ 3.056322] [drm] Initialized panfrost 1.1.0 20180908 for
1800000.gpu on minor 0
> > regulator is mount at :
> > ./regulator/vdd-gpu
> > whereas OPP is mount :
> > ./opp/soc-1800000.gpu/opp:756000000/supply-0/
>
> Getting a backtrace from the two occurrences, I see one added from:
>
> (debugfs_create_dir) from [<c04633f8>] (create_regulator+0xe0/0x220)
> (create_regulator) from [<c04681d8>] (_regulator_get+0x168/0x204)
> (_regulator_get) from [<c04682e0>] (regulator_bulk_get+0x64/0xf4)
> (regulator_bulk_get) from [<c04696f0>]
> (devm_regulator_bulk_get+0x40/0x74)
> (devm_regulator_bulk_get) from [<bf00af44>]
> (panfrost_device_init+0x1b4/0x48c [panfrost])
> (panfrost_device_init [panfrost]) from [<bf00a4d4>]
> (panfrost_probe+0x94/0x184 [panfrost])
> (panfrost_probe [panfrost]) from [<c04ee694>]
> (platform_drv_probe+0x48/0x94)
>
> And the other:
>
> (debugfs_create_dir) from [<c04633f8>] (create_regulator+0xe0/0x220)
> (create_regulator) from [<c04681d8>] (_regulator_get+0x168/0x204)
> (_regulator_get) from [<c05c1280>] (dev_pm_opp_set_regulators+0x6c/0x184)
> (dev_pm_opp_set_regulators) from [<bf00b4ac>]
> (panfrost_devfreq_init+0x38/0x1ac [panfrost])
> (panfrost_devfreq_init [panfrost]) from [<bf00a508>]
> (panfrost_probe+0xc8/0x184 [panfrost])
> (panfrost_probe [panfrost]) from [<c04ee694>]
> (platform_drv_probe+0x48/0x94)
>
> Both are created at /regulator/vdd_gpu
We are having an issue with Panfrost driver registering two times the
same regulator and giving an error when trying to create the debugfs
folder.
Could you clarify if it is allowed for a device to register two times
the same regulator?
I check Documentation/power/regulator/regulator.rst but this point is
not specified.
Thanks,
Clement
>
> >
> > I see that firefly as 2 regulators with the same name :
> > vdd_gpu from syr828
> > (https://github.com/mopplayer/Firefly-RK3288-Kernel-With-Mali764/blob/master/arch/arm/boot/dts/firefly-rk3288.dts#L453)
> > vdd_gpu from rk808_dcdc2_reg
> > (https://github.com/mopplayer/Firefly-RK3288-Kernel-With-Mali764/blob/master/arch/arm/boot/dts/firefly-rk3288.dts#L841)
> >
> > So i think the issue is from the firefly device-tree.
>
> I'm using the DTB from the kernel tree
> (/arch/arm/boot/dts/rk3288-firefly.dts) which as far as I can see
> doesn't contain this problem. Certainly decompiling the DTB I can see
> only one mention of vdd_gpu (in syr828).
>
> Steve
>
> >
> > Regards,
> > Clement
> >
> >>>>>>
> >>>>>> This is due to the regulator debugfs entries getting created twice (once
> >>>>>> in panfrost_regulator_init() and once here).
> >>>>>
> >>>>> Is it a warning that should be consider as an error? Look's more an info no?
> >>>>> What should be the correct behavior if a device want to register two
> >>>>> times the same regulator?
> >>>>
> >>>> Or we can change the name from vdd_XXX to opp_vdd_XXX ?
> >>>> https://elixir.bootlin.com/linux/latest/source/drivers/opp/debugfs.c#L45
> >>>
> >>> Yes, I'm not sure that it's actually a problem in practice. And it may
> >>> well be correct to change this in the generic code rather than try to
> >>> work around it in Panfrost. But we shouldn't spam the user with warnings
> >>> as that makes real issues harder to see.
> >>>
> >>> Your suggestion to change the name seems reasonable to me, but I don't
> >>> fully understand the opp code, so we'd need some review from the OPP
> >>> maintainers. Hopefully Viresh, Nishanth or Stephen can provide some insight.
> >>
> >> Agree, I will send a v2 with the rename and see if OPP Maintainers agree.
> >>
> >> Regards,
> >> Clement
> >>
> >>>
> >>> Steve
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-14 18:20 ` Clément Péron
@ 2020-04-14 18:55 ` Mark Brown
2020-04-14 19:16 ` Clément Péron
0 siblings, 1 reply; 26+ messages in thread
From: Mark Brown @ 2020-04-14 18:55 UTC (permalink / raw)
To: Clément Péron
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
Liam Girdwood, dri-devel, Steven Price, Alyssa Rosenzweig,
linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 1011 bytes --]
On Tue, Apr 14, 2020 at 08:20:23PM +0200, Clément Péron wrote:
> Hi Liam and Mark,
You might want to flag stuff like this in the subject line, I very
nearly deleted this without opening it since most of the email I get
about panfrost appears to be coming from me having sent patches rather
than being relevant.
> We are having an issue with Panfrost driver registering two times the
> same regulator and giving an error when trying to create the debugfs
> folder.
> Could you clarify if it is allowed for a device to register two times
> the same regulator?
> I check Documentation/power/regulator/regulator.rst but this point is
> not specified.
We don't actively prevent it and I can't think what other than debugfs
might run into problems (and that's just a warning) but it does seem
like a weird thing to want to do and like it's pointing to some
confusion in your code with two different parts of the device
controlling the same supply independently. What's the use case here?
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-14 18:55 ` Mark Brown
@ 2020-04-14 19:16 ` Clément Péron
2020-04-16 13:42 ` Multiple regulators for one device [was drm/panfrost: add devfreq regulator support] Steven Price
2020-04-16 13:44 ` [PATCH 2/2] drm/panfrost: add devfreq regulator support Mark Brown
0 siblings, 2 replies; 26+ messages in thread
From: Clément Péron @ 2020-04-14 19:16 UTC (permalink / raw)
To: Mark Brown
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
Liam Girdwood, dri-devel, Steven Price, Alyssa Rosenzweig,
linux-kernel
Hi Mark,
On Tue, 14 Apr 2020 at 20:55, Mark Brown <broonie@kernel.org> wrote:
>
> On Tue, Apr 14, 2020 at 08:20:23PM +0200, Clément Péron wrote:
> > Hi Liam and Mark,
>
> You might want to flag stuff like this in the subject line, I very
> nearly deleted this without opening it since most of the email I get
> about panfrost appears to be coming from me having sent patches rather
> than being relevant.
Ok will do next time,
>
> > We are having an issue with Panfrost driver registering two times the
> > same regulator and giving an error when trying to create the debugfs
> > folder.
>
> > Could you clarify if it is allowed for a device to register two times
> > the same regulator?
>
> > I check Documentation/power/regulator/regulator.rst but this point is
> > not specified.
>
> We don't actively prevent it and I can't think what other than debugfs
> might run into problems (and that's just a warning) but it does seem
> like a weird thing to want to do and like it's pointing to some
> confusion in your code with two different parts of the device
> controlling the same supply independently. What's the use case here?
Panfrost first probe clock, reset and regulator in device_init:
https://elixir.bootlin.com/linux/v5.7-rc1/source/drivers/gpu/drm/panfrost/panfrost_drv.c#L602
Then it probe for optional devfreq, devfreq will get opp tables and
also get regulator again.
https://elixir.bootlin.com/linux/v5.7-rc1/source/drivers/gpu/drm/panfrost/panfrost_drv.c#L609
That's can be reworked and Panfrost can only probe regulator if there
is no opp-table.
But if multiple regulator is not an issue and as each request is logic.
The first in device_init assure to enable the regulator and the second
in OPP assure the voltage level.
Maybe we can just fix this warning?
Thanks,
Clement
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: Multiple regulators for one device [was drm/panfrost: add devfreq regulator support]
2020-04-14 19:16 ` Clément Péron
@ 2020-04-16 13:42 ` Steven Price
2020-04-16 14:04 ` Mark Brown
2020-04-17 11:10 ` Robin Murphy
2020-04-16 13:44 ` [PATCH 2/2] drm/panfrost: add devfreq regulator support Mark Brown
1 sibling, 2 replies; 26+ messages in thread
From: Steven Price @ 2020-04-16 13:42 UTC (permalink / raw)
To: Clément Péron, Mark Brown
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
Liam Girdwood, dri-devel, linux-kernel, Alyssa Rosenzweig
On 14/04/2020 20:16, Clément Péron wrote:
> Hi Mark,
>
> On Tue, 14 Apr 2020 at 20:55, Mark Brown <broonie@kernel.org> wrote:
>>
>> On Tue, Apr 14, 2020 at 08:20:23PM +0200, Clément Péron wrote:
>>> Hi Liam and Mark,
>>
>> You might want to flag stuff like this in the subject line, I very
>> nearly deleted this without opening it since most of the email I get
>> about panfrost appears to be coming from me having sent patches rather
>> than being relevant.
>
> Ok will do next time,
>
>>
>>> We are having an issue with Panfrost driver registering two times the
>>> same regulator and giving an error when trying to create the debugfs
>>> folder.
>>
>>> Could you clarify if it is allowed for a device to register two times
>>> the same regulator?
>>
>>> I check Documentation/power/regulator/regulator.rst but this point is
>>> not specified.
>>
>> We don't actively prevent it and I can't think what other than debugfs
>> might run into problems (and that's just a warning) but it does seem
>> like a weird thing to want to do and like it's pointing to some
>> confusion in your code with two different parts of the device
>> controlling the same supply independently. What's the use case here?
>
> Panfrost first probe clock, reset and regulator in device_init:
> https://elixir.bootlin.com/linux/v5.7-rc1/source/drivers/gpu/drm/panfrost/panfrost_drv.c#L602
> Then it probe for optional devfreq, devfreq will get opp tables and
> also get regulator again.
> https://elixir.bootlin.com/linux/v5.7-rc1/source/drivers/gpu/drm/panfrost/panfrost_drv.c#L609
>
> That's can be reworked and Panfrost can only probe regulator if there
> is no opp-table.
This is what I was thinking about looking at. But it may make sense
instead to extend the regulator API to allow multiple regualtor_get()
calls for a single device. I haven't had time to dig into how difficult
this would be.
> But if multiple regulator is not an issue and as each request is logic.
> The first in device_init assure to enable the regulator and the second
> in OPP assure the voltage level.
>
> Maybe we can just fix this warning?
From what I can see in the code, just silencing the warning would lead
to 'odd' behaviour with debugfs. The first struct regulator Panfrost
acquires is the one that is used purely for turning the GPU on (no
voltage scaling). The second struct regulator is the one which is
obtained by the OPP framework. However the debugfs entries point into
the actual struct regulator, so it would be far more logical/useful if
those were pointing into the second struct regulator.
Ideally calling regulator_get a second time for the same device would
simply return the same struct regulator object (with a reference count
increment).
Perhaps a better approach would be for Panfrost to hand over the struct
regulator objects it has already got to the OPP framework. I.e. open
code dev_pm_opp_set_regulators(), but instead of calling
regulator_get_optional() simply populate the regulators we already have?
The other benefit of that is it would provide a clear hand-over of
responsibility between Panfrost handling it's own regulators and the OPP
framework picking up the work. The disadvantage is that Panfrost would
have to track whether the regulators have been handed over or not.
Steve
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-14 19:16 ` Clément Péron
2020-04-16 13:42 ` Multiple regulators for one device [was drm/panfrost: add devfreq regulator support] Steven Price
@ 2020-04-16 13:44 ` Mark Brown
1 sibling, 0 replies; 26+ messages in thread
From: Mark Brown @ 2020-04-16 13:44 UTC (permalink / raw)
To: Clément Péron
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
Liam Girdwood, dri-devel, Steven Price, Alyssa Rosenzweig,
linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 349 bytes --]
On Tue, Apr 14, 2020 at 09:16:39PM +0200, Clément Péron wrote:
> But if multiple regulator is not an issue and as each request is logic.
> The first in device_init assure to enable the regulator and the second
> in OPP assure the voltage level.
> Maybe we can just fix this warning?
Well, if you have a tasteful way of doing it I guess.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: Multiple regulators for one device [was drm/panfrost: add devfreq regulator support]
2020-04-16 13:42 ` Multiple regulators for one device [was drm/panfrost: add devfreq regulator support] Steven Price
@ 2020-04-16 14:04 ` Mark Brown
2020-04-17 11:10 ` Robin Murphy
1 sibling, 0 replies; 26+ messages in thread
From: Mark Brown @ 2020-04-16 14:04 UTC (permalink / raw)
To: Steven Price
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
Liam Girdwood, dri-devel, linux-kernel, Clément Péron,
Alyssa Rosenzweig
[-- Attachment #1.1: Type: text/plain, Size: 1048 bytes --]
On Thu, Apr 16, 2020 at 02:42:13PM +0100, Steven Price wrote:
> On 14/04/2020 20:16, Clément Péron wrote:
> > That's can be reworked and Panfrost can only probe regulator if there
> > is no opp-table.
> This is what I was thinking about looking at. But it may make sense instead
> to extend the regulator API to allow multiple regualtor_get() calls for a
> single device. I haven't had time to dig into how difficult this would be.
To repeat what I said before we don't actively stop this, it's just not
something that seems particularly tasteful and the warning does find
actual errors. I definitely don't think it's a good idea to extend the
API for this.
> Ideally calling regulator_get a second time for the same device would simply
> return the same struct regulator object (with a reference count increment).
One of the goals with the distinct struct regulator is to make sure that
we track all the user's activity together - if we mix multiple users in
there it becomes harder to tell if something is going wrong.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: Multiple regulators for one device [was drm/panfrost: add devfreq regulator support]
2020-04-16 13:42 ` Multiple regulators for one device [was drm/panfrost: add devfreq regulator support] Steven Price
2020-04-16 14:04 ` Mark Brown
@ 2020-04-17 11:10 ` Robin Murphy
2020-04-17 12:33 ` Clément Péron
1 sibling, 1 reply; 26+ messages in thread
From: Robin Murphy @ 2020-04-17 11:10 UTC (permalink / raw)
To: Steven Price, Clément Péron, Mark Brown
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
Liam Girdwood, dri-devel, linux-kernel, Alyssa Rosenzweig
On 2020-04-16 2:42 pm, Steven Price wrote:
[...]
> Perhaps a better approach would be for Panfrost to hand over the struct
> regulator objects it has already got to the OPP framework. I.e. open
> code dev_pm_opp_set_regulators(), but instead of calling
> regulator_get_optional() simply populate the regulators we already have?
>
> The other benefit of that is it would provide a clear hand-over of
> responsibility between Panfrost handling it's own regulators and the OPP
> framework picking up the work. The disadvantage is that Panfrost would
> have to track whether the regulators have been handed over or not.
Sounds like the most logical thing to do is to shuffle things around so
we start by trying to set up an OPP table, then fall back to explicitly
claiming clocks and regulators if necessary. Then we can easily make the
devfreq decision later in probe based on how that turned out.
Robin.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: Multiple regulators for one device [was drm/panfrost: add devfreq regulator support]
2020-04-17 11:10 ` Robin Murphy
@ 2020-04-17 12:33 ` Clément Péron
2020-04-19 9:25 ` Clément Péron
0 siblings, 1 reply; 26+ messages in thread
From: Clément Péron @ 2020-04-17 12:33 UTC (permalink / raw)
To: Robin Murphy
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
Liam Girdwood, dri-devel, Steven Price, Mark Brown,
Alyssa Rosenzweig, linux-kernel
Hi Robin,
On Fri, 17 Apr 2020 at 13:10, Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2020-04-16 2:42 pm, Steven Price wrote:
> [...]
> > Perhaps a better approach would be for Panfrost to hand over the struct
> > regulator objects it has already got to the OPP framework. I.e. open
> > code dev_pm_opp_set_regulators(), but instead of calling
> > regulator_get_optional() simply populate the regulators we already have?
> >
> > The other benefit of that is it would provide a clear hand-over of
> > responsibility between Panfrost handling it's own regulators and the OPP
> > framework picking up the work. The disadvantage is that Panfrost would
> > have to track whether the regulators have been handed over or not.
>
> Sounds like the most logical thing to do is to shuffle things around so
> we start by trying to set up an OPP table, then fall back to explicitly
> claiming clocks and regulators if necessary. Then we can easily make the
> devfreq decision later in probe based on how that turned out.
Ok I will propose a new serie with this behavior,
Thanks
Clement
>
> Robin.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: Multiple regulators for one device [was drm/panfrost: add devfreq regulator support]
2020-04-17 12:33 ` Clément Péron
@ 2020-04-19 9:25 ` Clément Péron
2020-04-20 12:32 ` Mark Brown
0 siblings, 1 reply; 26+ messages in thread
From: Clément Péron @ 2020-04-19 9:25 UTC (permalink / raw)
To: Robin Murphy
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
Liam Girdwood, dri-devel, Steven Price, Mark Brown,
Alyssa Rosenzweig, linux-kernel
Hi,
On Fri, 17 Apr 2020 at 14:33, Clément Péron <peron.clem@gmail.com> wrote:
>
> Hi Robin,
>
> On Fri, 17 Apr 2020 at 13:10, Robin Murphy <robin.murphy@arm.com> wrote:
> >
> > On 2020-04-16 2:42 pm, Steven Price wrote:
> > [...]
> > > Perhaps a better approach would be for Panfrost to hand over the struct
> > > regulator objects it has already got to the OPP framework. I.e. open
> > > code dev_pm_opp_set_regulators(), but instead of calling
> > > regulator_get_optional() simply populate the regulators we already have?
Just saw that a Lima devfreq[0] has been also introduced with I think
exactly the same logic.
Is this something that hasn't been triggered by Maintainer or I am
missing something?
I will backport some remarks made on the lima devfreq to improve panfrost one.
They are almost identical.
Regards,
Clement
0: https://cgit.freedesktop.org/drm-misc/commit/?id=1996970773a323533e1cc1b6b97f00a95d675f32
> > >
> > > The other benefit of that is it would provide a clear hand-over of
> > > responsibility between Panfrost handling it's own regulators and the OPP
> > > framework picking up the work. The disadvantage is that Panfrost would
> > > have to track whether the regulators have been handed over or not.
> >
> > Sounds like the most logical thing to do is to shuffle things around so
> > we start by trying to set up an OPP table, then fall back to explicitly
> > claiming clocks and regulators if necessary. Then we can easily make the
> > devfreq decision later in probe based on how that turned out.
>
> Ok I will propose a new serie with this behavior,
>
> Thanks
> Clement
>
> >
> > Robin.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: Multiple regulators for one device [was drm/panfrost: add devfreq regulator support]
2020-04-19 9:25 ` Clément Péron
@ 2020-04-20 12:32 ` Mark Brown
0 siblings, 0 replies; 26+ messages in thread
From: Mark Brown @ 2020-04-20 12:32 UTC (permalink / raw)
To: Clément Péron
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
Liam Girdwood, dri-devel, Steven Price, Alyssa Rosenzweig,
Robin Murphy, linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 598 bytes --]
On Sun, Apr 19, 2020 at 11:25:08AM +0200, Clément Péron wrote:
> Just saw that a Lima devfreq[0] has been also introduced with I think
> exactly the same logic.
> Is this something that hasn't been triggered by Maintainer or I am
> missing something?
My understanding is that there is very little use of any of this
upstream since it's all pretty new, some platforms have OPPs but use a
firmware interface rather than the OS to control clocks and regulators
while most other platforms don't have OPPs defined and it's only
platforms with both regulators and OPPs that are affected.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-04-14 13:10 ` Steven Price
2020-04-14 18:20 ` Clément Péron
@ 2020-05-02 22:07 ` Clément Péron
2020-05-07 14:30 ` Steven Price
1 sibling, 1 reply; 26+ messages in thread
From: Clément Péron @ 2020-05-02 22:07 UTC (permalink / raw)
To: Steven Price
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
linux-kernel, dri-devel, Alyssa Rosenzweig
Hi Steven,
On Tue, 14 Apr 2020 at 15:10, Steven Price <steven.price@arm.com> wrote:
>
> Hi Clément,
>
> On 13/04/2020 18:28, Clément Péron wrote:
> > Hi Steven,
> >
<snip>
> Getting a backtrace from the two occurrences, I see one added from:
>
> (debugfs_create_dir) from [<c04633f8>] (create_regulator+0xe0/0x220)
> (create_regulator) from [<c04681d8>] (_regulator_get+0x168/0x204)
> (_regulator_get) from [<c04682e0>] (regulator_bulk_get+0x64/0xf4)
> (regulator_bulk_get) from [<c04696f0>]
> (devm_regulator_bulk_get+0x40/0x74)
> (devm_regulator_bulk_get) from [<bf00af44>]
> (panfrost_device_init+0x1b4/0x48c [panfrost])
> (panfrost_device_init [panfrost]) from [<bf00a4d4>]
> (panfrost_probe+0x94/0x184 [panfrost])
> (panfrost_probe [panfrost]) from [<c04ee694>]
> (platform_drv_probe+0x48/0x94)
>
> And the other:
>
> (debugfs_create_dir) from [<c04633f8>] (create_regulator+0xe0/0x220)
> (create_regulator) from [<c04681d8>] (_regulator_get+0x168/0x204)
> (_regulator_get) from [<c05c1280>] (dev_pm_opp_set_regulators+0x6c/0x184)
> (dev_pm_opp_set_regulators) from [<bf00b4ac>]
> (panfrost_devfreq_init+0x38/0x1ac [panfrost])
> (panfrost_devfreq_init [panfrost]) from [<bf00a508>]
> (panfrost_probe+0xc8/0x184 [panfrost])
> (panfrost_probe [panfrost]) from [<c04ee694>]
> (platform_drv_probe+0x48/0x94)
>
> Both are created at /regulator/vdd_gpu
I'm preparing a new version with some clean from lima devfreq.
My working branch :
https://github.com/clementperon/linux/commits/panfrost_devfreq
Two strange things I observe:
- After 30sec the regulator is released by OPP ???
[ 33.757627] vdd-gpu: disabling
Introduce the regulator support in this commit:
https://github.com/clementperon/linux/commit/be310c37b82010e293b7f129ccdcb711a2abb2ce
- The Cooling map is not probe correctly :
[ 2.545756] panfrost 1800000.gpu: [drm:panfrost_devfreq_init
[panfrost]] Failed to register cooling device
Introduce in this commit :
https://github.com/clementperon/linux/commit/0252c38fd55ad78366ac4b1714e285c88db34557
Do you have an hint about what I'm missing ?
Thanks for your help,
Clement
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-05-02 22:07 ` Clément Péron
@ 2020-05-07 14:30 ` Steven Price
2020-05-09 16:28 ` Clément Péron
0 siblings, 1 reply; 26+ messages in thread
From: Steven Price @ 2020-05-07 14:30 UTC (permalink / raw)
To: Clément Péron
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
linux-kernel, dri-devel, Alyssa Rosenzweig
On 02/05/2020 23:07, Clément Péron wrote:
> Hi Steven,
>
> On Tue, 14 Apr 2020 at 15:10, Steven Price <steven.price@arm.com> wrote:
>>
>> Hi Clément,
>>
>> On 13/04/2020 18:28, Clément Péron wrote:
>>> Hi Steven,
>>>
>
> <snip>
>
>> Getting a backtrace from the two occurrences, I see one added from:
>>
>> (debugfs_create_dir) from [<c04633f8>] (create_regulator+0xe0/0x220)
>> (create_regulator) from [<c04681d8>] (_regulator_get+0x168/0x204)
>> (_regulator_get) from [<c04682e0>] (regulator_bulk_get+0x64/0xf4)
>> (regulator_bulk_get) from [<c04696f0>]
>> (devm_regulator_bulk_get+0x40/0x74)
>> (devm_regulator_bulk_get) from [<bf00af44>]
>> (panfrost_device_init+0x1b4/0x48c [panfrost])
>> (panfrost_device_init [panfrost]) from [<bf00a4d4>]
>> (panfrost_probe+0x94/0x184 [panfrost])
>> (panfrost_probe [panfrost]) from [<c04ee694>]
>> (platform_drv_probe+0x48/0x94)
>>
>> And the other:
>>
>> (debugfs_create_dir) from [<c04633f8>] (create_regulator+0xe0/0x220)
>> (create_regulator) from [<c04681d8>] (_regulator_get+0x168/0x204)
>> (_regulator_get) from [<c05c1280>] (dev_pm_opp_set_regulators+0x6c/0x184)
>> (dev_pm_opp_set_regulators) from [<bf00b4ac>]
>> (panfrost_devfreq_init+0x38/0x1ac [panfrost])
>> (panfrost_devfreq_init [panfrost]) from [<bf00a508>]
>> (panfrost_probe+0xc8/0x184 [panfrost])
>> (panfrost_probe [panfrost]) from [<c04ee694>]
>> (platform_drv_probe+0x48/0x94)
>>
>> Both are created at /regulator/vdd_gpu
>
> I'm preparing a new version with some clean from lima devfreq.
> My working branch :
> https://github.com/clementperon/linux/commits/panfrost_devfreq
I had a look at that branch and gave it a quick spin on my Firefly
RK3288 and didn't notice any issues.
> Two strange things I observe:
> - After 30sec the regulator is released by OPP ???
> [ 33.757627] vdd-gpu: disabling
> Introduce the regulator support in this commit:
> https://github.com/clementperon/linux/commit/be310c37b82010e293b7f129ccdcb711a2abb2ce
I can't see anything wrong with this commit, but equally in my DTS I
have a "regulator-always-on" for vdd_gpu. My initial thought was that
this could be runtime PM of the GPU - but I can't see how
panfrost_device_suspend() would end up turning off the regulator. So
unless there's some way that the regulator itself suspends (but it
should know it's in use) I've no clue why this would be happening.
Since you've got a reproduction - can you get a backtrace where the
regulator is getting disabled?
> - The Cooling map is not probe correctly :
> [ 2.545756] panfrost 1800000.gpu: [drm:panfrost_devfreq_init
> [panfrost]] Failed to register cooling device
> Introduce in this commit :
> https://github.com/clementperon/linux/commit/0252c38fd55ad78366ac4b1714e285c88db34557
>
> Do you have an hint about what I'm missing ?
Sorry, my knowledge of the cooling framework is very limited. What
you've got looks plausible, but I'm afraid I can't really help beyond
that! As before - can you try adding some printk()s in e.g.
of_devfreq_cooling_register_power() and find out where it is bailing out?
Steve
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-05-07 14:30 ` Steven Price
@ 2020-05-09 16:28 ` Clément Péron
2020-05-09 19:40 ` Clément Péron
0 siblings, 1 reply; 26+ messages in thread
From: Clément Péron @ 2020-05-09 16:28 UTC (permalink / raw)
To: Steven Price
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
linux-kernel, dri-devel, Alyssa Rosenzweig
Hi Steven,
On Thu, 7 May 2020 at 16:30, Steven Price <steven.price@arm.com> wrote:
>
> On 02/05/2020 23:07, Clément Péron wrote:
> > Hi Steven,
> >
> > On Tue, 14 Apr 2020 at 15:10, Steven Price <steven.price@arm.com> wrote:
> >>
> >> Hi Clément,
> >>
> >> On 13/04/2020 18:28, Clément Péron wrote:
> >>> Hi Steven,
> >>>
> >
<snip>
>
> Since you've got a reproduction - can you get a backtrace where the
> regulator is getting disabled?
Regulator is disabled from regulator_late_cleanup()
[ 33.757650] vdd-gpu: disabling
[ 33.760718] CPU: 2 PID: 31 Comm: kworker/2:1 Not tainted
5.7.0-rc2-next-20200424 #8
[ 33.768362] Hardware name: Beelink GS1 (DT)
[ 33.772553] Workqueue: events regulator_init_complete_work_function
[ 33.778813] Call trace:
[ 33.781261] dump_backtrace+0x0/0x1a0
[ 33.784922] show_stack+0x18/0x30
[ 33.788238] dump_stack+0xc0/0x114
[ 33.791638] regulator_late_cleanup+0x164/0x1f0
[ 33.796165] class_for_each_device+0x64/0xe0
[ 33.800431] regulator_init_complete_work_function+0x4c/0x60
[ 33.806084] process_one_work+0x19c/0x330
[ 33.810090] worker_thread+0x4c/0x430
[ 33.813748] kthread+0x138/0x160
[ 33.816973] ret_from_fork+0x10/0x24
the use_count is at 0...
I have check and the regulator_get is called and regulator_put is
never called for vdd-gpu.
Not sure what is happening here...
>
> > - The Cooling map is not probe correctly :
> > [ 2.545756] panfrost 1800000.gpu: [drm:panfrost_devfreq_init
> > [panfrost]] Failed to register cooling device
> > Introduce in this commit :
> > https://github.com/clementperon/linux/commit/0252c38fd55ad78366ac4b1714e285c88db34557
> >
> > Do you have an hint about what I'm missing ?
>
> Sorry, my knowledge of the cooling framework is very limited. What
> you've got looks plausible, but I'm afraid I can't really help beyond
> that! As before - can you try adding some printk()s in e.g.
> of_devfreq_cooling_register_power() and find out where it is bailing out?
Dumb issue, I was missing the CONFIG_DEVFREQ_THERMAL -_-, I will make
a patch to enable it in arm64 defconfig.
Regards,
Clement
>
> Steve
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] drm/panfrost: add devfreq regulator support
2020-05-09 16:28 ` Clément Péron
@ 2020-05-09 19:40 ` Clément Péron
0 siblings, 0 replies; 26+ messages in thread
From: Clément Péron @ 2020-05-09 19:40 UTC (permalink / raw)
To: Steven Price
Cc: Nishanth Menon, Tomeu Vizoso, Stephen Boyd, Viresh Kumar,
linux-kernel, dri-devel, Alyssa Rosenzweig
On Sat, 9 May 2020 at 18:28, Clément Péron <peron.clem@gmail.com> wrote:
>
> Hi Steven,
>
> On Thu, 7 May 2020 at 16:30, Steven Price <steven.price@arm.com> wrote:
> >
> > On 02/05/2020 23:07, Clément Péron wrote:
> > > Hi Steven,
> > >
> > > On Tue, 14 Apr 2020 at 15:10, Steven Price <steven.price@arm.com> wrote:
> > >>
> > >> Hi Clément,
> > >>
> > >> On 13/04/2020 18:28, Clément Péron wrote:
> > >>> Hi Steven,
> > >>>
> > >
> <snip>
> >
> > Since you've got a reproduction - can you get a backtrace where the
> > regulator is getting disabled?
>
> Regulator is disabled from regulator_late_cleanup()
>
> [ 33.757650] vdd-gpu: disabling
> [ 33.760718] CPU: 2 PID: 31 Comm: kworker/2:1 Not tainted
> 5.7.0-rc2-next-20200424 #8
> [ 33.768362] Hardware name: Beelink GS1 (DT)
> [ 33.772553] Workqueue: events regulator_init_complete_work_function
> [ 33.778813] Call trace:
> [ 33.781261] dump_backtrace+0x0/0x1a0
> [ 33.784922] show_stack+0x18/0x30
> [ 33.788238] dump_stack+0xc0/0x114
> [ 33.791638] regulator_late_cleanup+0x164/0x1f0
> [ 33.796165] class_for_each_device+0x64/0xe0
> [ 33.800431] regulator_init_complete_work_function+0x4c/0x60
> [ 33.806084] process_one_work+0x19c/0x330
> [ 33.810090] worker_thread+0x4c/0x430
> [ 33.813748] kthread+0x138/0x160
> [ 33.816973] ret_from_fork+0x10/0x24
>
> the use_count is at 0...
>
> I have check and the regulator_get is called and regulator_put is
> never called for vdd-gpu.
> Not sure what is happening here...
Looks like the OPP framework only get the regulator but never enable it...
I will send a question to OPP Maintainer about this.
Regards,
CLement
>
>
> >
> > > - The Cooling map is not probe correctly :
> > > [ 2.545756] panfrost 1800000.gpu: [drm:panfrost_devfreq_init
> > > [panfrost]] Failed to register cooling device
> > > Introduce in this commit :
> > > https://github.com/clementperon/linux/commit/0252c38fd55ad78366ac4b1714e285c88db34557
> > >
> > > Do you have an hint about what I'm missing ?
> >
> > Sorry, my knowledge of the cooling framework is very limited. What
> > you've got looks plausible, but I'm afraid I can't really help beyond
> > that! As before - can you try adding some printk()s in e.g.
> > of_devfreq_cooling_register_power() and find out where it is bailing out?
>
> Dumb issue, I was missing the CONFIG_DEVFREQ_THERMAL -_-, I will make
> a patch to enable it in arm64 defconfig.
>
> Regards,
> Clement
>
> >
> > Steve
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 26+ messages in thread
end of thread, other threads:[~2020-05-11 7:17 UTC | newest]
Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-11 20:06 [PATCH 1/2] drm/panfrost: missing remove opp table in case of failure Clément Péron
2020-04-11 20:06 ` [PATCH 2/2] drm/panfrost: add devfreq regulator support Clément Péron
2020-04-13 11:33 ` Clément Péron
2020-04-13 13:18 ` Steven Price
2020-04-13 14:18 ` Clément Péron
2020-04-13 14:31 ` Clément Péron
2020-04-13 15:55 ` Steven Price
2020-04-13 16:35 ` Clément Péron
2020-04-13 17:28 ` Clément Péron
2020-04-14 13:10 ` Steven Price
2020-04-14 18:20 ` Clément Péron
2020-04-14 18:55 ` Mark Brown
2020-04-14 19:16 ` Clément Péron
2020-04-16 13:42 ` Multiple regulators for one device [was drm/panfrost: add devfreq regulator support] Steven Price
2020-04-16 14:04 ` Mark Brown
2020-04-17 11:10 ` Robin Murphy
2020-04-17 12:33 ` Clément Péron
2020-04-19 9:25 ` Clément Péron
2020-04-20 12:32 ` Mark Brown
2020-04-16 13:44 ` [PATCH 2/2] drm/panfrost: add devfreq regulator support Mark Brown
2020-05-02 22:07 ` Clément Péron
2020-05-07 14:30 ` Steven Price
2020-05-09 16:28 ` Clément Péron
2020-05-09 19:40 ` Clément Péron
2020-04-14 13:09 ` Robin Murphy
2020-04-13 13:07 ` [PATCH 1/2] drm/panfrost: missing remove opp table in case of failure Steven Price
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).