KVM Archive on lore.kernel.org
 help / color / Atom feed
* [kvm-unit-tests PATCH v7 0/4] s390x: SCLP Unit test
@ 2020-01-10 18:40 Claudio Imbrenda
  2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 1/4] s390x: export sclp_setup_int Claudio Imbrenda
                   ` (3 more replies)
  0 siblings, 4 replies; 19+ messages in thread
From: Claudio Imbrenda @ 2020-01-10 18:40 UTC (permalink / raw)
  To: kvm; +Cc: linux-s390, thuth, david, borntraeger, frankja

This patchset contains some minor cleanup, some preparatory work and
then the SCLP unit test itself.

The unit test checks the following:
    
    * Correctly ignoring instruction bits that should be ignored
    * Privileged instruction check
    * Check for addressing exceptions
    * Specification exceptions:
      - SCCB size less than 8
      - SCCB unaligned
      - SCCB overlaps prefix or lowcore
      - SCCB address higher than 2GB
    * Return codes for
      - Invalid command
      - SCCB too short (but at least 8)
      - SCCB page boundary violation

v6 -> v7
* renamed spx() and stpx() wrappers to set_prefix and get_prefix
* set_prefix now takes a value and get_prefix now returns a value
* put back some inline assembly for spx and stpx as a consequence
* used LC_SIZE instead of 2 * PAGE_SIZE everywhere in the unit test
v5 -> v6
* fixed a bug in test_addressing
* improved comments in test_sccb_prefix
* replaced all inline assembly usages of spx and stpx with the wrappers
* added one more wrapper for test_one_sccb for read-only tests
v4 -> v5
* updated usage of report()
* added SPX and STPX wrappers to the library
* improved readability
* addressed some more comments
v3 -> v4
* export sclp_setup_int instead of copying it
* add more comments
* rename some more variables to improve readability
* improve the prefix test
* improved the invalid address test
* addressed further comments received during review
v2 -> v3
* generally improved the naming of variables
* added and fixed comments
* renamed test_one_run to test_one_simple
* added some const where needed
* addresed many more small comments received during review
v1 -> v2
* fix many small issues that came up during the first round of reviews
* add comments to each function
* use a static buffer for the SCCP template when used

Claudio Imbrenda (4):
  s390x: export sclp_setup_int
  s390x: sclp: add service call instruction wrapper
  s390x: lib: add SPX and STPX instruction wrapper
  s390x: SCLP unit test

 s390x/Makefile           |   1 +
 lib/s390x/asm/arch_def.h |  26 +++
 lib/s390x/sclp.h         |   1 +
 lib/s390x/sclp.c         |   9 +-
 s390x/intercept.c        |  23 +-
 s390x/sclp.c             | 472 +++++++++++++++++++++++++++++++++++++++
 s390x/unittests.cfg      |   8 +
 7 files changed, 518 insertions(+), 22 deletions(-)
 create mode 100644 s390x/sclp.c

-- 
2.24.1


^ permalink raw reply	[flat|nested] 19+ messages in thread

* [kvm-unit-tests PATCH v7 1/4] s390x: export sclp_setup_int
  2020-01-10 18:40 [kvm-unit-tests PATCH v7 0/4] s390x: SCLP Unit test Claudio Imbrenda
@ 2020-01-10 18:40 ` Claudio Imbrenda
  2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 2/4] s390x: sclp: add service call instruction wrapper Claudio Imbrenda
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 19+ messages in thread
From: Claudio Imbrenda @ 2020-01-10 18:40 UTC (permalink / raw)
  To: kvm; +Cc: linux-s390, thuth, david, borntraeger, frankja

Export sclp_setup_int() so that it can be used in tests.

Needed for an upcoming unit test.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
---
 lib/s390x/sclp.h | 1 +
 lib/s390x/sclp.c | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/lib/s390x/sclp.h b/lib/s390x/sclp.h
index 6d40fb7..675f07e 100644
--- a/lib/s390x/sclp.h
+++ b/lib/s390x/sclp.h
@@ -265,6 +265,7 @@ typedef struct ReadEventData {
 } __attribute__((packed)) ReadEventData;
 
 extern char _sccb[];
+void sclp_setup_int(void);
 void sclp_handle_ext(void);
 void sclp_wait_busy(void);
 void sclp_mark_busy(void);
diff --git a/lib/s390x/sclp.c b/lib/s390x/sclp.c
index 7798f04..123b639 100644
--- a/lib/s390x/sclp.c
+++ b/lib/s390x/sclp.c
@@ -45,7 +45,7 @@ static void mem_init(phys_addr_t mem_end)
 	page_alloc_ops_enable();
 }
 
-static void sclp_setup_int(void)
+void sclp_setup_int(void)
 {
 	uint64_t mask;
 
-- 
2.24.1


^ permalink raw reply	[flat|nested] 19+ messages in thread

* [kvm-unit-tests PATCH v7 2/4] s390x: sclp: add service call instruction wrapper
  2020-01-10 18:40 [kvm-unit-tests PATCH v7 0/4] s390x: SCLP Unit test Claudio Imbrenda
  2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 1/4] s390x: export sclp_setup_int Claudio Imbrenda
@ 2020-01-10 18:40 ` Claudio Imbrenda
  2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 3/4] s390x: lib: add SPX and STPX " Claudio Imbrenda
  2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test Claudio Imbrenda
  3 siblings, 0 replies; 19+ messages in thread
From: Claudio Imbrenda @ 2020-01-10 18:40 UTC (permalink / raw)
  To: kvm; +Cc: linux-s390, thuth, david, borntraeger, frankja

Add a wrapper for the service call instruction, and use it for SCLP
interactions instead of using inline assembly everywhere.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
---
 lib/s390x/asm/arch_def.h | 13 +++++++++++++
 lib/s390x/sclp.c         |  7 +------
 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/lib/s390x/asm/arch_def.h b/lib/s390x/asm/arch_def.h
index cf6e1ca..1a5e3c6 100644
--- a/lib/s390x/asm/arch_def.h
+++ b/lib/s390x/asm/arch_def.h
@@ -271,4 +271,17 @@ static inline int stsi(void *addr, int fc, int sel1, int sel2)
 	return cc;
 }
 
+static inline int servc(uint32_t command, unsigned long sccb)
+{
+	int cc;
+
+	asm volatile(
+		"       .insn   rre,0xb2200000,%1,%2\n"  /* servc %1,%2 */
+		"       ipm     %0\n"
+		"       srl     %0,28"
+		: "=&d" (cc) : "d" (command), "a" (sccb)
+		: "cc", "memory");
+	return cc;
+}
+
 #endif
diff --git a/lib/s390x/sclp.c b/lib/s390x/sclp.c
index 123b639..4054d0e 100644
--- a/lib/s390x/sclp.c
+++ b/lib/s390x/sclp.c
@@ -116,12 +116,7 @@ int sclp_service_call(unsigned int command, void *sccb)
 	int cc;
 
 	sclp_setup_int();
-	asm volatile(
-		"       .insn   rre,0xb2200000,%1,%2\n"  /* servc %1,%2 */
-		"       ipm     %0\n"
-		"       srl     %0,28"
-		: "=&d" (cc) : "d" (command), "a" (__pa(sccb))
-		: "cc", "memory");
+	cc = servc(command, __pa(sccb));
 	sclp_wait_busy();
 	if (cc == 3)
 		return -1;
-- 
2.24.1


^ permalink raw reply	[flat|nested] 19+ messages in thread

* [kvm-unit-tests PATCH v7 3/4] s390x: lib: add SPX and STPX instruction wrapper
  2020-01-10 18:40 [kvm-unit-tests PATCH v7 0/4] s390x: SCLP Unit test Claudio Imbrenda
  2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 1/4] s390x: export sclp_setup_int Claudio Imbrenda
  2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 2/4] s390x: sclp: add service call instruction wrapper Claudio Imbrenda
@ 2020-01-10 18:40 ` " Claudio Imbrenda
  2020-01-13  9:42   ` Janosch Frank
  2020-01-13 10:42   ` David Hildenbrand
  2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test Claudio Imbrenda
  3 siblings, 2 replies; 19+ messages in thread
From: Claudio Imbrenda @ 2020-01-10 18:40 UTC (permalink / raw)
  To: kvm; +Cc: linux-s390, thuth, david, borntraeger, frankja

Add a wrapper for the SET PREFIX and STORE PREFIX instructions, and
use it instead of using inline assembly.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
 lib/s390x/asm/arch_def.h | 13 +++++++++++++
 s390x/intercept.c        | 23 ++++++++---------------
 2 files changed, 21 insertions(+), 15 deletions(-)

diff --git a/lib/s390x/asm/arch_def.h b/lib/s390x/asm/arch_def.h
index 1a5e3c6..15a4d49 100644
--- a/lib/s390x/asm/arch_def.h
+++ b/lib/s390x/asm/arch_def.h
@@ -284,4 +284,17 @@ static inline int servc(uint32_t command, unsigned long sccb)
 	return cc;
 }
 
+static inline void set_prefix(uint32_t new_prefix)
+{
+	asm volatile("	spx %0" : : "Q" (new_prefix) : "memory");
+}
+
+static inline uint32_t get_prefix(void)
+{
+	uint32_t current_prefix;
+
+	asm volatile("	stpx %0" : "=Q" (current_prefix));
+	return current_prefix;
+}
+
 #endif
diff --git a/s390x/intercept.c b/s390x/intercept.c
index 3696e33..cd96121 100644
--- a/s390x/intercept.c
+++ b/s390x/intercept.c
@@ -26,13 +26,10 @@ static void test_stpx(void)
 	uint32_t new_prefix = (uint32_t)(intptr_t)pagebuf;
 
 	/* Can we successfully change the prefix? */
-	asm volatile (
-		" stpx	%0\n"
-		" spx	%2\n"
-		" stpx	%1\n"
-		" spx	%0\n"
-		: "+Q"(old_prefix), "+Q"(tst_prefix)
-		: "Q"(new_prefix));
+	old_prefix = get_prefix();
+	set_prefix(new_prefix);
+	tst_prefix = get_prefix();
+	set_prefix(old_prefix);
 	report(old_prefix == 0 && tst_prefix == new_prefix, "store prefix");
 
 	expect_pgm_int();
@@ -63,14 +60,10 @@ static void test_spx(void)
 	 * some facility bits there ... at least some of them should be
 	 * set in our buffer afterwards.
 	 */
-	asm volatile (
-		" stpx	%0\n"
-		" spx	%1\n"
-		" stfl	0\n"
-		" spx	%0\n"
-		: "+Q"(old_prefix)
-		: "Q"(new_prefix)
-		: "memory");
+	old_prefix = get_prefix();
+	set_prefix(new_prefix);
+	asm volatile("	stfl 0" : : : "memory");
+	set_prefix(old_prefix);
 	report(pagebuf[GEN_LC_STFL] != 0, "stfl to new prefix");
 
 	expect_pgm_int();
-- 
2.24.1


^ permalink raw reply	[flat|nested] 19+ messages in thread

* [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test
  2020-01-10 18:40 [kvm-unit-tests PATCH v7 0/4] s390x: SCLP Unit test Claudio Imbrenda
                   ` (2 preceding siblings ...)
  2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 3/4] s390x: lib: add SPX and STPX " Claudio Imbrenda
@ 2020-01-10 18:40 ` Claudio Imbrenda
  2020-01-13 11:00   ` David Hildenbrand
  3 siblings, 1 reply; 19+ messages in thread
From: Claudio Imbrenda @ 2020-01-10 18:40 UTC (permalink / raw)
  To: kvm; +Cc: linux-s390, thuth, david, borntraeger, frankja

SCLP unit test. Testing the following:

* Correctly ignoring instruction bits that should be ignored
* Privileged instruction check
* Check for addressing exceptions
* Specification exceptions:
  - SCCB size less than 8
  - SCCB unaligned
  - SCCB overlaps prefix or lowcore
  - SCCB address higher than 2GB
* Return codes for
  - Invalid command
  - SCCB too short (but at least 8)
  - SCCB page boundary violation

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
---
 s390x/Makefile      |   1 +
 s390x/sclp.c        | 472 ++++++++++++++++++++++++++++++++++++++++++++
 s390x/unittests.cfg |   8 +
 3 files changed, 481 insertions(+)
 create mode 100644 s390x/sclp.c

diff --git a/s390x/Makefile b/s390x/Makefile
index 3744372..ddb4b48 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -16,6 +16,7 @@ tests += $(TEST_DIR)/diag288.elf
 tests += $(TEST_DIR)/stsi.elf
 tests += $(TEST_DIR)/skrf.elf
 tests += $(TEST_DIR)/smp.elf
+tests += $(TEST_DIR)/sclp.elf
 tests_binary = $(patsubst %.elf,%.bin,$(tests))
 
 all: directories test_cases test_cases_binary
diff --git a/s390x/sclp.c b/s390x/sclp.c
new file mode 100644
index 0000000..10f0809
--- /dev/null
+++ b/s390x/sclp.c
@@ -0,0 +1,472 @@
+/*
+ * Service Call tests
+ *
+ * Copyright (c) 2019 IBM Corp
+ *
+ * Authors:
+ *  Claudio Imbrenda <imbrenda@linux.ibm.com>
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2.
+ */
+
+#include <libcflat.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+#include <asm/interrupt.h>
+#include <sclp.h>
+
+#define PGM_NONE	1
+#define PGM_BIT_SPEC	(1ULL << PGM_INT_CODE_SPECIFICATION)
+#define PGM_BIT_ADDR	(1ULL << PGM_INT_CODE_ADDRESSING)
+#define PGM_BIT_PRIV	(1ULL << PGM_INT_CODE_PRIVILEGED_OPERATION)
+#define MKPTR(x) ((void *)(uint64_t)(x))
+
+#define LC_SIZE (2 * PAGE_SIZE)
+
+static uint8_t pagebuf[LC_SIZE] __attribute__((aligned(LC_SIZE)));	/* scratch pages used for some tests */
+static uint8_t prefix_buf[LC_SIZE] __attribute__((aligned(LC_SIZE)));	/* temporary lowcore for test_sccb_prefix */
+static uint8_t sccb_template[PAGE_SIZE];				/* SCCB template to be used */
+static uint32_t valid_code;						/* valid command code for READ SCP INFO */
+static struct lowcore *lc;
+
+/**
+ * Perform one service call, handling exceptions and interrupts.
+ */
+static int sclp_service_call_test(unsigned int command, void *sccb)
+{
+	int cc;
+
+	sclp_mark_busy();
+	sclp_setup_int();
+	cc = servc(command, __pa(sccb));
+	if (lc->pgm_int_code) {
+		sclp_handle_ext();
+		return 0;
+	}
+	if (!cc)
+		sclp_wait_busy();
+	return cc;
+}
+
+/**
+ * Perform one test at the given address, optionally using the SCCB template,
+ * checking for the expected program interrupts and return codes.
+ *
+ * The parameter buf_len indicates the number of bytes of the template that
+ * should be copied to the test address, and should be 0 when the test
+ * address is invalid, in which case nothing is copied.
+ *
+ * The template is used to simplify tests where the same buffer content is
+ * used many times in a row, at different addresses.
+ *
+ * Returns true in case of success or false in case of failure
+ */
+static bool test_one_sccb(uint32_t cmd, uint8_t *addr, uint16_t buf_len, uint64_t exp_pgm, uint16_t exp_rc)
+{
+	SCCBHeader *h = (SCCBHeader *)addr;
+	int res, pgm;
+
+	/* Copy the template to the test address if needed */
+	if (buf_len)
+		memcpy(addr, sccb_template, buf_len);
+	expect_pgm_int();
+	/* perform the actual call */
+	res = sclp_service_call_test(cmd, h);
+	if (res) {
+		report_info("SCLP not ready (command %#x, address %p, cc %d)", cmd, addr, res);
+		return false;
+	}
+	pgm = clear_pgm_int();
+	/* Check if the program exception was one of the expected ones */
+	if (!((1ULL << pgm) & exp_pgm)) {
+		report_info("First failure at addr %p, buf_len %d, cmd %#x, pgm code %d",
+				addr, buf_len, cmd, pgm);
+		return false;
+	}
+	/* Check if the response code is the one expected */
+	if (exp_rc && exp_rc != h->response_code) {
+		report_info("First failure at addr %p, buf_len %d, cmd %#x, resp code %#x",
+				addr, buf_len, cmd, h->response_code);
+		return false;
+	}
+	return true;
+}
+
+/**
+ * Wrapper for test_one_sccb to be used when the template should not be
+ * copied and the memory address should not be touched.
+ */
+static bool test_one_ro(uint32_t cmd, uint8_t *addr, uint64_t exp_pgm, uint16_t exp_rc)
+{
+	return test_one_sccb(cmd, addr, 0, exp_pgm, exp_rc);
+}
+
+/**
+ * Wrapper for test_one_sccb to set up a simple SCCB template.
+ *
+ * The parameter sccb_len indicates the value that will be saved in the SCCB
+ * length field of the SCCB, buf_len indicates the number of bytes of
+ * template that need to be copied to the actual test address. In many cases
+ * it's enough to clear/copy the first 8 bytes of the buffer, while the SCCB
+ * itself can be larger.
+ *
+ * Returns true in case of success or false in case of failure
+ */
+static bool test_one_simple(uint32_t cmd, uint8_t *addr, uint16_t sccb_len,
+			uint16_t buf_len, uint64_t exp_pgm, uint16_t exp_rc)
+{
+	memset(sccb_template, 0, sizeof(sccb_template));
+	((SCCBHeader *)sccb_template)->length = sccb_len;
+	return test_one_sccb(cmd, addr, buf_len, exp_pgm, exp_rc);
+}
+
+/**
+ * Test SCCB lengths < 8.
+ */
+static void test_sccb_too_short(void)
+{
+	int len;
+
+	for (len = 0; len < 8; len++)
+		if (!test_one_simple(valid_code, pagebuf, len, 8, PGM_BIT_SPEC, 0))
+			break;
+
+	report(len == 8, "SCCB too short");
+}
+
+/**
+ * Test SCCBs that are not 64-bit aligned.
+ */
+static void test_sccb_unaligned(void)
+{
+	int offset;
+
+	for (offset = 1; offset < 8; offset++)
+		if (!test_one_simple(valid_code, offset + pagebuf, 8, 8, PGM_BIT_SPEC, 0))
+			break;
+	report(offset == 8, "SCCB unaligned");
+}
+
+/**
+ * Test SCCBs whose address is in the lowcore or prefix area.
+ */
+static void test_sccb_prefix(void)
+{
+	uint8_t scratch[LC_SIZE];
+	uint32_t prefix, new_prefix;
+	int offset;
+
+	/*
+	 * copy the current lowcore to the future new location, otherwise we
+	 * will not have a valid lowcore after setting the new prefix.
+	 */
+	memcpy(prefix_buf, 0, LC_SIZE);
+	/* save the current prefix (it's probably going to be 0) */
+	prefix = get_prefix();
+	/*
+	 * save the current content of absolute pages 0 and 1, so we can
+	 * restore them after we trash them later on
+	 */
+	memcpy(scratch, (void *)(intptr_t)prefix, LC_SIZE);
+	/* set the new prefix to prefix_buf */
+	new_prefix = (uint32_t)(intptr_t)prefix_buf;
+	set_prefix(new_prefix);
+
+	/*
+	 * testing with SCCB addresses in the lowcore; since we can't
+	 * actually trash the lowcore (unsurprisingly, things break if we
+	 * do), this will be a read-only test.
+	 */
+	for (offset = 0; offset < LC_SIZE; offset += 8)
+		if (!test_one_ro(valid_code, MKPTR(offset), PGM_BIT_SPEC, 0))
+			break;
+	report(offset == LC_SIZE, "SCCB low pages");
+
+	/*
+	 * the SCLP should not even touch the memory, but we will write the
+	 * SCCBs all over the two pages starting at absolute address 0, thus
+	 * trashing them; we will need to restore them later.
+	 */
+	for (offset = 0; offset < LC_SIZE; offset += 8)
+		if (!test_one_simple(valid_code, MKPTR(new_prefix + offset), 8, 8, PGM_BIT_SPEC, 0))
+			break;
+	report(offset == LC_SIZE, "SCCB prefix pages");
+
+	/* restore the previous contents of absolute pages 0 and 1 */
+	memcpy(prefix_buf, 0, LC_SIZE);
+	/* restore the prefix to the original value */
+	set_prefix(prefix);
+}
+
+/**
+ * Test SCCBs that are above 2GB. If outside of memory, an addressing
+ * exception is also allowed.
+ */
+static void test_sccb_high(void)
+{
+	SCCBHeader *h = (SCCBHeader *)pagebuf;
+	uintptr_t a[33 * 4 * 2 + 2];	/* for the list of addresses to test */
+
+	uint64_t maxram;
+	int i, pgm, len = 0;
+
+	h->length = 8;
+	/* addresses with 1 bit set in the first 33 bits */
+	for (i = 0; i < 33; i++)
+		a[len++] = 1UL << (i + 31);
+	/* addresses with 2 consecutive bits set in the first 33 bits */
+	for (i = 0; i < 33; i++)
+		a[len++] = 3UL << (i + 31);
+	/* addresses with all bits set in bits 0..N */
+	for (i = 0; i < 33; i++)
+		a[len++] = 0xffffffff80000000UL << i;
+	/* addresses with all bits set in bits N..33 */
+	a[len++] = 0x80000000;
+	for (i = 1; i < 33; i++, len++)
+		a[len] = a[len - 1] | (1UL << (i + 31));
+	/* all the addresses above, but adding the offset of a valid buffer */
+	for (i = 0; i < len; i++)
+		a[len + i] = a[i] + (intptr_t)h;
+	len += i;
+	/* two more hand-crafted addresses */
+	a[len++] = 0xdeadbeef00000000;
+	a[len++] = 0xdeaddeadbeef0000;
+
+	maxram = get_ram_size();
+	for (i = 0; i < len; i++) {
+		pgm = PGM_BIT_SPEC | (a[i] >= maxram ? PGM_BIT_ADDR : 0);
+		if (!test_one_ro(valid_code, (void *)a[i], pgm, 0))
+			break;
+	}
+	report(i == len, "SCCB high addresses");
+}
+
+/**
+ * Test invalid commands, both invalid command detail codes and valid
+ * ones with invalid command class code.
+ */
+static void test_inval(void)
+{
+	const uint16_t res = SCLP_RC_INVALID_SCLP_COMMAND;
+	uint32_t cmd;
+	int i;
+
+	report_prefix_push("Invalid command");
+	for (i = 0; i < 65536; i++) {
+		cmd = 0xdead0000 | i;
+		if (!test_one_simple(cmd, pagebuf, PAGE_SIZE, PAGE_SIZE, PGM_NONE, res))
+			break;
+	}
+	report(i == 65536, "Command detail code");
+
+	for (i = 0; i < 256; i++) {
+		cmd = (valid_code & ~0xff) | i;
+		if (cmd == valid_code)
+			continue;
+		if (!test_one_simple(cmd, pagebuf, PAGE_SIZE, PAGE_SIZE, PGM_NONE, res))
+			break;
+	}
+	report(i == 256, "Command class code");
+	report_prefix_pop();
+}
+
+
+/**
+ * Test short SCCBs (but larger than 8).
+ */
+static void test_short(void)
+{
+	const uint16_t res = SCLP_RC_INSUFFICIENT_SCCB_LENGTH;
+	int len;
+
+	for (len = 8; len < 144; len++)
+		if (!test_one_simple(valid_code, pagebuf, len, len, PGM_NONE, res))
+			break;
+	report(len == 144, "Insufficient SCCB length (Read SCP info)");
+
+	for (len = 8; len < 40; len++)
+		if (!test_one_simple(SCLP_READ_CPU_INFO, pagebuf, len, len, PGM_NONE, res))
+			break;
+	report(len == 40, "Insufficient SCCB length (Read CPU info)");
+}
+
+/**
+ * Test SCCB page boundary violations.
+ */
+static void test_boundary(void)
+{
+	const uint32_t cmd = SCLP_CMD_WRITE_EVENT_DATA;
+	const uint16_t res = SCLP_RC_SCCB_BOUNDARY_VIOLATION;
+	WriteEventData *sccb = (WriteEventData *)sccb_template;
+	int len, offset;
+
+	memset(sccb_template, 0, sizeof(sccb_template));
+	sccb->h.function_code = SCLP_FC_NORMAL_WRITE;
+	for (len = 32; len <= 4096; len++) {
+		offset = len & 7 ? len & ~7 : len - 8;
+		for (offset = 4096 - offset; offset < 4096; offset += 8) {
+			sccb->h.length = len;
+			if (!test_one_sccb(cmd, offset + pagebuf, len, PGM_NONE, res))
+				goto out;
+		}
+	}
+out:
+	report(len > 4096 && offset == 4096, "SCCB page boundary violation");
+}
+
+/**
+ * Test excessively long SCCBs.
+ */
+static void test_toolong(void)
+{
+	const uint32_t cmd = SCLP_CMD_WRITE_EVENT_DATA;
+	const uint16_t res = SCLP_RC_SCCB_BOUNDARY_VIOLATION;
+	WriteEventData *sccb = (WriteEventData *)sccb_template;
+	int len;
+
+	memset(sccb_template, 0, sizeof(sccb_template));
+	sccb->h.function_code = SCLP_FC_NORMAL_WRITE;
+	for (len = 4097; len < 8192; len++) {
+		sccb->h.length = len;
+		if (!test_one_sccb(cmd, pagebuf, PAGE_SIZE, PGM_NONE, res))
+			break;
+	}
+	report(len == 8192, "SCCB bigger than 4k");
+}
+
+/**
+ * Test privileged operation.
+ */
+static void test_priv(void)
+{
+	SCCBHeader *h = (SCCBHeader *)pagebuf;
+
+	report_prefix_push("Privileged operation");
+	h->length = 8;
+	expect_pgm_int();
+	enter_pstate();
+	servc(valid_code, __pa(h));
+	check_pgm_int_code(PGM_INT_CODE_PRIVILEGED_OPERATION);
+	report_prefix_pop();
+}
+
+/**
+ * Test addressing exceptions. We need to test SCCB addresses between the
+ * end of available memory and 2GB, because after 2GB a specification
+ * exception is also allowed.
+ * Only applicable if the VM has less than 2GB of memory
+ */
+static void test_addressing(void)
+{
+	unsigned long i, maxram = get_ram_size();
+
+	/* the VM has more than 2GB of memory */
+	if (maxram >= 0x80000000) {
+		report_skip("Invalid SCCB address");
+		return;
+	}
+	/* test all possible valid addresses immediately after the end of memory
+	 * up to 64KB after the end of memory
+	 */
+	for (i = 0; i < 0x10000 && i + maxram < 0x80000000; i += 8)
+		if (!test_one_ro(valid_code, MKPTR(i + maxram), PGM_BIT_ADDR, 0))
+			goto out;
+	/* test more addresses until we reach 1MB after end of memory;
+	 * increment by a prime number (times 8) in order to test all
+	 * possible valid offsets inside pages
+	 */
+	for (; i < 0x100000 && i + maxram < 0x80000000 ; i += 808)
+		if (!test_one_ro(valid_code, MKPTR(i + maxram), PGM_BIT_ADDR, 0))
+			goto out;
+	/* test the remaining addresses until we reach address 2GB;
+	 * increment by a prime number (times 8) in order to test all
+	 * possible valid offsets inside pages
+	 */
+	for (; i + maxram < 0x80000000; i += 800024)
+		if (!test_one_ro(valid_code, MKPTR(i + maxram), PGM_BIT_ADDR, 0))
+			goto out;
+out:
+	report(i + maxram >= 0x80000000, "Invalid SCCB address");
+}
+
+/**
+ * Test some bits in the instruction format that are specified to be ignored.
+ */
+static void test_instbits(void)
+{
+	SCCBHeader *h = (SCCBHeader *)pagebuf;
+	int cc;
+
+	expect_pgm_int();
+	sclp_mark_busy();
+	h->length = 8;
+	sclp_setup_int();
+
+	asm volatile(
+		"       .insn   rre,0xb2204200,%1,%2\n"  /* servc %1,%2 */
+		"       ipm     %0\n"
+		"       srl     %0,28"
+		: "=&d" (cc) : "d" (valid_code), "a" (__pa(pagebuf))
+		: "cc", "memory");
+	if (lc->pgm_int_code) {
+		sclp_handle_ext();
+		cc = 1;
+	} else if (!cc)
+		sclp_wait_busy();
+	report(cc == 0, "Instruction format ignored bits");
+}
+
+/**
+ * Find a valid READ INFO command code; not all codes are always allowed, and
+ * probing should be performed in the right order.
+ */
+static void find_valid_sclp_code(void)
+{
+	const unsigned int commands[] = { SCLP_CMDW_READ_SCP_INFO_FORCED,
+					  SCLP_CMDW_READ_SCP_INFO };
+	SCCBHeader *h = (SCCBHeader *)pagebuf;
+	int i, cc;
+
+	for (i = 0; i < ARRAY_SIZE(commands); i++) {
+		sclp_mark_busy();
+		memset(h, 0, sizeof(*h));
+		h->length = 4096;
+
+		valid_code = commands[i];
+		cc = sclp_service_call(commands[i], h);
+		if (cc)
+			break;
+		if (h->response_code == SCLP_RC_NORMAL_READ_COMPLETION)
+			return;
+		if (h->response_code != SCLP_RC_INVALID_SCLP_COMMAND)
+			break;
+	}
+	valid_code = 0;
+	report_abort("READ_SCP_INFO failed");
+}
+
+int main(void)
+{
+	report_prefix_push("sclp");
+	find_valid_sclp_code();
+
+	/* Test some basic things */
+	test_instbits();
+	test_priv();
+	test_addressing();
+
+	/* Test the specification exceptions */
+	test_sccb_too_short();
+	test_sccb_unaligned();
+	test_sccb_prefix();
+	test_sccb_high();
+
+	/* Test the expected response codes */
+	test_inval();
+	test_short();
+	test_boundary();
+	test_toolong();
+
+	return report_summary();
+}
diff --git a/s390x/unittests.cfg b/s390x/unittests.cfg
index f1b07cd..07013b2 100644
--- a/s390x/unittests.cfg
+++ b/s390x/unittests.cfg
@@ -75,3 +75,11 @@ file = stsi.elf
 [smp]
 file = smp.elf
 extra_params =-smp 2
+
+[sclp-1g]
+file = sclp.elf
+extra_params = -m 1G
+
+[sclp-3g]
+file = sclp.elf
+extra_params = -m 3G
-- 
2.24.1


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 3/4] s390x: lib: add SPX and STPX instruction wrapper
  2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 3/4] s390x: lib: add SPX and STPX " Claudio Imbrenda
@ 2020-01-13  9:42   ` Janosch Frank
  2020-01-13 12:27     ` Claudio Imbrenda
  2020-01-13 10:42   ` David Hildenbrand
  1 sibling, 1 reply; 19+ messages in thread
From: Janosch Frank @ 2020-01-13  9:42 UTC (permalink / raw)
  To: Claudio Imbrenda, kvm; +Cc: linux-s390, thuth, david, borntraeger

[-- Attachment #1.1: Type: text/plain, Size: 987 bytes --]

On 1/10/20 7:40 PM, Claudio Imbrenda wrote:
> Add a wrapper for the SET PREFIX and STORE PREFIX instructions, and
> use it instead of using inline assembly.
> 
> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
> Reviewed-by: Thomas Huth <thuth@redhat.com>

Reviewed-by: Janosch Frank <frankja@linux.ibm.com>

> @@ -63,14 +60,10 @@ static void test_spx(void)
>  	 * some facility bits there ... at least some of them should be
>  	 * set in our buffer afterwards.
>  	 */
> -	asm volatile (
> -		" stpx	%0\n"
> -		" spx	%1\n"
> -		" stfl	0\n"
> -		" spx	%0\n"
> -		: "+Q"(old_prefix)
> -		: "Q"(new_prefix)
> -		: "memory");
> +	old_prefix = get_prefix();
> +	set_prefix(new_prefix);
> +	asm volatile("	stfl 0" : : : "memory");

Couldn't we also use stfl from facility.h here?
And do we need to add a memory clobber to it?

> +	set_prefix(old_prefix);
>  	report(pagebuf[GEN_LC_STFL] != 0, "stfl to new prefix");
>  
>  	expect_pgm_int();
> 



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 3/4] s390x: lib: add SPX and STPX instruction wrapper
  2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 3/4] s390x: lib: add SPX and STPX " Claudio Imbrenda
  2020-01-13  9:42   ` Janosch Frank
@ 2020-01-13 10:42   ` David Hildenbrand
  1 sibling, 0 replies; 19+ messages in thread
From: David Hildenbrand @ 2020-01-13 10:42 UTC (permalink / raw)
  To: Claudio Imbrenda, kvm; +Cc: linux-s390, thuth, borntraeger, frankja

On 10.01.20 19:40, Claudio Imbrenda wrote:
> Add a wrapper for the SET PREFIX and STORE PREFIX instructions, and
> use it instead of using inline assembly.
> 
> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
> Reviewed-by: Thomas Huth <thuth@redhat.com>
> ---
>  lib/s390x/asm/arch_def.h | 13 +++++++++++++
>  s390x/intercept.c        | 23 ++++++++---------------
>  2 files changed, 21 insertions(+), 15 deletions(-)
> 
> diff --git a/lib/s390x/asm/arch_def.h b/lib/s390x/asm/arch_def.h
> index 1a5e3c6..15a4d49 100644
> --- a/lib/s390x/asm/arch_def.h
> +++ b/lib/s390x/asm/arch_def.h
> @@ -284,4 +284,17 @@ static inline int servc(uint32_t command, unsigned long sccb)
>  	return cc;
>  }
>  
> +static inline void set_prefix(uint32_t new_prefix)
> +{
> +	asm volatile("	spx %0" : : "Q" (new_prefix) : "memory");
> +}
> +
> +static inline uint32_t get_prefix(void)
> +{
> +	uint32_t current_prefix;
> +
> +	asm volatile("	stpx %0" : "=Q" (current_prefix));
> +	return current_prefix;
> +}
> +
>  #endif
> diff --git a/s390x/intercept.c b/s390x/intercept.c
> index 3696e33..cd96121 100644
> --- a/s390x/intercept.c
> +++ b/s390x/intercept.c
> @@ -26,13 +26,10 @@ static void test_stpx(void)
>  	uint32_t new_prefix = (uint32_t)(intptr_t)pagebuf;
>  
>  	/* Can we successfully change the prefix? */
> -	asm volatile (
> -		" stpx	%0\n"
> -		" spx	%2\n"
> -		" stpx	%1\n"
> -		" spx	%0\n"
> -		: "+Q"(old_prefix), "+Q"(tst_prefix)
> -		: "Q"(new_prefix));
> +	old_prefix = get_prefix();
> +	set_prefix(new_prefix);
> +	tst_prefix = get_prefix();
> +	set_prefix(old_prefix);
>  	report(old_prefix == 0 && tst_prefix == new_prefix, "store prefix");
>  
>  	expect_pgm_int();
> @@ -63,14 +60,10 @@ static void test_spx(void)
>  	 * some facility bits there ... at least some of them should be
>  	 * set in our buffer afterwards.
>  	 */
> -	asm volatile (
> -		" stpx	%0\n"
> -		" spx	%1\n"
> -		" stfl	0\n"
> -		" spx	%0\n"
> -		: "+Q"(old_prefix)
> -		: "Q"(new_prefix)
> -		: "memory");
> +	old_prefix = get_prefix();
> +	set_prefix(new_prefix);
> +	asm volatile("	stfl 0" : : : "memory");
> +	set_prefix(old_prefix);
>  	report(pagebuf[GEN_LC_STFL] != 0, "stfl to new prefix");
>  
>  	expect_pgm_int();
> 

Besides the comments from Janosch, looks good to me.

-- 
Thanks,

David / dhildenb


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test
  2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test Claudio Imbrenda
@ 2020-01-13 11:00   ` David Hildenbrand
  2020-01-13 12:33     ` Claudio Imbrenda
  0 siblings, 1 reply; 19+ messages in thread
From: David Hildenbrand @ 2020-01-13 11:00 UTC (permalink / raw)
  To: Claudio Imbrenda, kvm; +Cc: linux-s390, thuth, borntraeger, frankja

> +/**
> + * Test some bits in the instruction format that are specified to be ignored.
> + */
> +static void test_instbits(void)
> +{
> +	SCCBHeader *h = (SCCBHeader *)pagebuf;
> +	int cc;
> +
> +	expect_pgm_int();
> +	sclp_mark_busy();
> +	h->length = 8;
> +	sclp_setup_int();
> +
> +	asm volatile(
> +		"       .insn   rre,0xb2204200,%1,%2\n"  /* servc %1,%2 */
> +		"       ipm     %0\n"
> +		"       srl     %0,28"
> +		: "=&d" (cc) : "d" (valid_code), "a" (__pa(pagebuf))
> +		: "cc", "memory");
> +	if (lc->pgm_int_code) {
> +		sclp_handle_ext();
> +		cc = 1;
> +	} else if (!cc)
> +		

I wonder if something like the following would be possible:

expect_pgm_int();
...
asm volatiole();
...
sclp_wait_busy();
check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);

We would have to clear "sclp_busy" when we get a progam interrupt on a
servc instruction - shouldn't be too hard to add to the program
exception handler.

> +	report(cc == 0, "Instruction format ignored bits");
> +}
> +
> +/**
> + * Find a valid READ INFO command code; not all codes are always allowed, and
> + * probing should be performed in the right order.
> + */
> +static void find_valid_sclp_code(void)
> +{
> +	const unsigned int commands[] = { SCLP_CMDW_READ_SCP_INFO_FORCED,
> +					  SCLP_CMDW_READ_SCP_INFO };
> +	SCCBHeader *h = (SCCBHeader *)pagebuf;
> +	int i, cc;
> +
> +	for (i = 0; i < ARRAY_SIZE(commands); i++) {
> +		sclp_mark_busy();
> +		memset(h, 0, sizeof(*h));
> +		h->length = 4096;
> +
> +		valid_code = commands[i];
> +		cc = sclp_service_call(commands[i], h);
> +		if (cc)
> +			break;
> +		if (h->response_code == SCLP_RC_NORMAL_READ_COMPLETION)
> +			return;
> +		if (h->response_code != SCLP_RC_INVALID_SCLP_COMMAND)
> +			break;
> +	}
> +	valid_code = 0;

This can be dropped because ...

> +	report_abort("READ_SCP_INFO failed");

... you abort here.


-- 
Thanks,

David / dhildenb


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 3/4] s390x: lib: add SPX and STPX instruction wrapper
  2020-01-13  9:42   ` Janosch Frank
@ 2020-01-13 12:27     ` Claudio Imbrenda
  0 siblings, 0 replies; 19+ messages in thread
From: Claudio Imbrenda @ 2020-01-13 12:27 UTC (permalink / raw)
  To: Janosch Frank; +Cc: kvm, linux-s390, thuth, david, borntraeger

On Mon, 13 Jan 2020 10:42:01 +0100
Janosch Frank <frankja@linux.ibm.com> wrote:

> On 1/10/20 7:40 PM, Claudio Imbrenda wrote:
> > Add a wrapper for the SET PREFIX and STORE PREFIX instructions, and
> > use it instead of using inline assembly.
> > 
> > Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
> > Reviewed-by: Thomas Huth <thuth@redhat.com>  
> 
> Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
> 
> > @@ -63,14 +60,10 @@ static void test_spx(void)
> >  	 * some facility bits there ... at least some of them
> > should be
> >  	 * set in our buffer afterwards.
> >  	 */
> > -	asm volatile (
> > -		" stpx	%0\n"
> > -		" spx	%1\n"
> > -		" stfl	0\n"
> > -		" spx	%0\n"
> > -		: "+Q"(old_prefix)
> > -		: "Q"(new_prefix)
> > -		: "memory");
> > +	old_prefix = get_prefix();
> > +	set_prefix(new_prefix);
> > +	asm volatile("	stfl 0" : : : "memory");  
> 
> Couldn't we also use stfl from facility.h here?
> And do we need to add a memory clobber to it?

will do both

> > +	set_prefix(old_prefix);
> >  	report(pagebuf[GEN_LC_STFL] != 0, "stfl to new prefix");
> >  
> >  	expect_pgm_int();
> >   
> 
> 


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test
  2020-01-13 11:00   ` David Hildenbrand
@ 2020-01-13 12:33     ` Claudio Imbrenda
  2020-01-13 12:48       ` David Hildenbrand
  0 siblings, 1 reply; 19+ messages in thread
From: Claudio Imbrenda @ 2020-01-13 12:33 UTC (permalink / raw)
  To: David Hildenbrand; +Cc: kvm, linux-s390, thuth, borntraeger, frankja

On Mon, 13 Jan 2020 12:00:00 +0100
David Hildenbrand <david@redhat.com> wrote:

> > +/**
> > + * Test some bits in the instruction format that are specified to
> > be ignored.
> > + */
> > +static void test_instbits(void)
> > +{
> > +	SCCBHeader *h = (SCCBHeader *)pagebuf;
> > +	int cc;
> > +
> > +	expect_pgm_int();
> > +	sclp_mark_busy();
> > +	h->length = 8;
> > +	sclp_setup_int();
> > +
> > +	asm volatile(
> > +		"       .insn   rre,0xb2204200,%1,%2\n"  /* servc
> > %1,%2 */
> > +		"       ipm     %0\n"
> > +		"       srl     %0,28"
> > +		: "=&d" (cc) : "d" (valid_code), "a"
> > (__pa(pagebuf))
> > +		: "cc", "memory");
> > +	if (lc->pgm_int_code) {
> > +		sclp_handle_ext();
> > +		cc = 1;
> > +	} else if (!cc)
> > +		  
> 
> I wonder if something like the following would be possible:
> 
> expect_pgm_int();
> ...
> asm volatiole();
> ...
> sclp_wait_busy();
> check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);

we do not expect a specification exception, if that happens it's
a bug and the test should rightfully fail.

> We would have to clear "sclp_busy" when we get a progam interrupt on a
> servc instruction - shouldn't be too hard to add to the program
> exception handler.

Sure that could be done, but is it worth it to rework the program
interrupt handler only for one unit test?

[...]

> > +	valid_code = 0;  
> 
> This can be dropped because ...
> 
> > +	report_abort("READ_SCP_INFO failed");  
> 
> ... you abort here.

will fix 


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test
  2020-01-13 12:33     ` Claudio Imbrenda
@ 2020-01-13 12:48       ` David Hildenbrand
  2020-01-13 12:58         ` Claudio Imbrenda
  0 siblings, 1 reply; 19+ messages in thread
From: David Hildenbrand @ 2020-01-13 12:48 UTC (permalink / raw)
  To: Claudio Imbrenda; +Cc: kvm, linux-s390, thuth, borntraeger, frankja

On 13.01.20 13:33, Claudio Imbrenda wrote:
> On Mon, 13 Jan 2020 12:00:00 +0100
> David Hildenbrand <david@redhat.com> wrote:
> 
>>> +/**
>>> + * Test some bits in the instruction format that are specified to
>>> be ignored.
>>> + */
>>> +static void test_instbits(void)
>>> +{
>>> +	SCCBHeader *h = (SCCBHeader *)pagebuf;
>>> +	int cc;
>>> +
>>> +	expect_pgm_int();
>>> +	sclp_mark_busy();
>>> +	h->length = 8;
>>> +	sclp_setup_int();
>>> +
>>> +	asm volatile(
>>> +		"       .insn   rre,0xb2204200,%1,%2\n"  /* servc
>>> %1,%2 */
>>> +		"       ipm     %0\n"
>>> +		"       srl     %0,28"
>>> +		: "=&d" (cc) : "d" (valid_code), "a"
>>> (__pa(pagebuf))
>>> +		: "cc", "memory");
>>> +	if (lc->pgm_int_code) {
>>> +		sclp_handle_ext();
>>> +		cc = 1;
>>> +	} else if (!cc)
>>> +		  
>>
>> I wonder if something like the following would be possible:
>>
>> expect_pgm_int();
>> ...
>> asm volatiole();
>> ...
>> sclp_wait_busy();
>> check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);
> 
> we do not expect a specification exception, if that happens it's
> a bug and the test should rightfully fail.

Which one do we expect? (you're not checking for a specific one, should
you?)

> 
>> We would have to clear "sclp_busy" when we get a progam interrupt on a
>> servc instruction - shouldn't be too hard to add to the program
>> exception handler.
> 
> Sure that could be done, but is it worth it to rework the program
> interrupt handler only for one unit test?

Good point. I don't like this particular code, but I can live with it :)

-- 
Thanks,

David / dhildenb


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test
  2020-01-13 12:48       ` David Hildenbrand
@ 2020-01-13 12:58         ` Claudio Imbrenda
  2020-01-13 13:10           ` David Hildenbrand
  0 siblings, 1 reply; 19+ messages in thread
From: Claudio Imbrenda @ 2020-01-13 12:58 UTC (permalink / raw)
  To: David Hildenbrand; +Cc: kvm, linux-s390, thuth, borntraeger, frankja

On Mon, 13 Jan 2020 13:48:17 +0100
David Hildenbrand <david@redhat.com> wrote:

[...]
	    
> >>
> >> I wonder if something like the following would be possible:
> >>
> >> expect_pgm_int();
> >> ...
> >> asm volatiole();
> >> ...
> >> sclp_wait_busy();
> >> check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);  
> > 
> > we do not expect a specification exception, if that happens it's
> > a bug and the test should rightfully fail.  
> 
> Which one do we expect? (you're not checking for a specific one,
> should you?)

nothing, the call should succeed :)

> >   
> >> We would have to clear "sclp_busy" when we get a progam interrupt
> >> on a servc instruction - shouldn't be too hard to add to the
> >> program exception handler.  
> > 
> > Sure that could be done, but is it worth it to rework the program
> > interrupt handler only for one unit test?  
> 
> Good point. I don't like this particular code, but I can live with it
> :)
> 


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test
  2020-01-13 12:58         ` Claudio Imbrenda
@ 2020-01-13 13:10           ` David Hildenbrand
  2020-01-13 14:05             ` Claudio Imbrenda
  0 siblings, 1 reply; 19+ messages in thread
From: David Hildenbrand @ 2020-01-13 13:10 UTC (permalink / raw)
  To: Claudio Imbrenda; +Cc: kvm, linux-s390, thuth, borntraeger, frankja

On 13.01.20 13:58, Claudio Imbrenda wrote:
> On Mon, 13 Jan 2020 13:48:17 +0100
> David Hildenbrand <david@redhat.com> wrote:
> 
> [...]
> 	    
>>>>
>>>> I wonder if something like the following would be possible:
>>>>
>>>> expect_pgm_int();
>>>> ...
>>>> asm volatiole();
>>>> ...
>>>> sclp_wait_busy();
>>>> check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);  
>>>
>>> we do not expect a specification exception, if that happens it's
>>> a bug and the test should rightfully fail.  
>>
>> Which one do we expect? (you're not checking for a specific one,
>> should you?)
> 
> nothing, the call should succeed :)

:) I'm confused by the fact that you "expect_pgm_int()" but actually
don't expect one ...

Please enlighten me why this isn't

+	sclp_mark_busy();
+	h->length = 8;
+	sclp_setup_int();
+
+	asm volatile(
+		"       .insn   rre,0xb2204200,%1,%2\n"  /* servc %1,%2 */
+		"       ipm     %0\n"
+		"       srl     %0,28"
+		: "=&d" (cc) : "d" (valid_code), "a" (__pa(pagebuf))
+		: "cc", "memory");
+	if (!cc)
+		sclp_wait_busy();
+	report(cc == 0, "Instruction format ignored bits");

I feel like I am missing something important.

-- 
Thanks,

David / dhildenb


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test
  2020-01-13 13:10           ` David Hildenbrand
@ 2020-01-13 14:05             ` Claudio Imbrenda
  2020-01-13 14:43               ` David Hildenbrand
  0 siblings, 1 reply; 19+ messages in thread
From: Claudio Imbrenda @ 2020-01-13 14:05 UTC (permalink / raw)
  To: David Hildenbrand; +Cc: kvm, linux-s390, thuth, borntraeger, frankja

On Mon, 13 Jan 2020 14:10:10 +0100
David Hildenbrand <david@redhat.com> wrote:

[...]

> :) I'm confused by the fact that you "expect_pgm_int()" but actually
> don't expect one ...
> 
> Please enlighten me why this isn't
> 
> +	sclp_mark_busy();
> +	h->length = 8;
> +	sclp_setup_int();
> +
> +	asm volatile(
> +		"       .insn   rre,0xb2204200,%1,%2\n"  /* servc
> %1,%2 */
> +		"       ipm     %0\n"
> +		"       srl     %0,28"
> +		: "=&d" (cc) : "d" (valid_code), "a" (__pa(pagebuf))
> +		: "cc", "memory");
> +	if (!cc)
> +		sclp_wait_busy();
> +	report(cc == 0, "Instruction format ignored bits");
> 
> I feel like I am missing something important.

because if we take an unexpected pgm interrupt:
* the interrupt handler will write stuff on the console using SCLP
* it will wait for the busy flag to be cleared before doing so
* thus it will hang.

this would be solved by adding special logic to the pgm interrupt
handler (as we have discussed in your previous email)


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test
  2020-01-13 14:05             ` Claudio Imbrenda
@ 2020-01-13 14:43               ` David Hildenbrand
  2020-01-13 15:24                 ` Claudio Imbrenda
  0 siblings, 1 reply; 19+ messages in thread
From: David Hildenbrand @ 2020-01-13 14:43 UTC (permalink / raw)
  To: Claudio Imbrenda; +Cc: kvm, linux-s390, thuth, borntraeger, frankja

On 13.01.20 15:05, Claudio Imbrenda wrote:
> On Mon, 13 Jan 2020 14:10:10 +0100
> David Hildenbrand <david@redhat.com> wrote:
> 
> [...]
> 
>> :) I'm confused by the fact that you "expect_pgm_int()" but actually
>> don't expect one ...
>>
>> Please enlighten me why this isn't
>>
>> +	sclp_mark_busy();
>> +	h->length = 8;
>> +	sclp_setup_int();
>> +
>> +	asm volatile(
>> +		"       .insn   rre,0xb2204200,%1,%2\n"  /* servc
>> %1,%2 */
>> +		"       ipm     %0\n"
>> +		"       srl     %0,28"
>> +		: "=&d" (cc) : "d" (valid_code), "a" (__pa(pagebuf))
>> +		: "cc", "memory");
>> +	if (!cc)
>> +		sclp_wait_busy();
>> +	report(cc == 0, "Instruction format ignored bits");
>>
>> I feel like I am missing something important.
> 
> because if we take an unexpected pgm interrupt:
> * the interrupt handler will write stuff on the console using SCLP
> * it will wait for the busy flag to be cleared before doing so
> * thus it will hang.
> 
> this would be solved by adding special logic to the pgm interrupt
> handler (as we have discussed in your previous email)
> 

I see, so the issue should hold for all SCLP checks where we don't
expect an exception ... hmmm

-- 
Thanks,

David / dhildenb


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test
  2020-01-13 14:43               ` David Hildenbrand
@ 2020-01-13 15:24                 ` Claudio Imbrenda
  2020-01-13 16:06                   ` David Hildenbrand
  0 siblings, 1 reply; 19+ messages in thread
From: Claudio Imbrenda @ 2020-01-13 15:24 UTC (permalink / raw)
  To: David Hildenbrand; +Cc: kvm, linux-s390, thuth, borntraeger, frankja

On Mon, 13 Jan 2020 15:43:28 +0100
David Hildenbrand <david@redhat.com> wrote:

> On 13.01.20 15:05, Claudio Imbrenda wrote:
> > On Mon, 13 Jan 2020 14:10:10 +0100
> > David Hildenbrand <david@redhat.com> wrote:
> > 
> > [...]
> >   
> >> :) I'm confused by the fact that you "expect_pgm_int()" but
> >> actually don't expect one ...
> >>
> >> Please enlighten me why this isn't
> >>
> >> +	sclp_mark_busy();
> >> +	h->length = 8;
> >> +	sclp_setup_int();
> >> +
> >> +	asm volatile(
> >> +		"       .insn   rre,0xb2204200,%1,%2\n"  /* servc
> >> %1,%2 */
> >> +		"       ipm     %0\n"
> >> +		"       srl     %0,28"
> >> +		: "=&d" (cc) : "d" (valid_code), "a"
> >> (__pa(pagebuf))
> >> +		: "cc", "memory");
> >> +	if (!cc)
> >> +		sclp_wait_busy();
> >> +	report(cc == 0, "Instruction format ignored bits");
> >>
> >> I feel like I am missing something important.  
> > 
> > because if we take an unexpected pgm interrupt:
> > * the interrupt handler will write stuff on the console using SCLP
> > * it will wait for the busy flag to be cleared before doing so
> > * thus it will hang.
> > 
> > this would be solved by adding special logic to the pgm interrupt
> > handler (as we have discussed in your previous email)
> >   
> 
> I see, so the issue should hold for all SCLP checks where we don't
> expect an exception ... hmmm
 
which is why my wrapper in the unit test is so complicated :)


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test
  2020-01-13 15:24                 ` Claudio Imbrenda
@ 2020-01-13 16:06                   ` David Hildenbrand
  2020-01-13 16:17                     ` Claudio Imbrenda
  0 siblings, 1 reply; 19+ messages in thread
From: David Hildenbrand @ 2020-01-13 16:06 UTC (permalink / raw)
  To: Claudio Imbrenda; +Cc: kvm, linux-s390, thuth, borntraeger, frankja

On 13.01.20 16:24, Claudio Imbrenda wrote:
> On Mon, 13 Jan 2020 15:43:28 +0100
> David Hildenbrand <david@redhat.com> wrote:
> 
>> On 13.01.20 15:05, Claudio Imbrenda wrote:
>>> On Mon, 13 Jan 2020 14:10:10 +0100
>>> David Hildenbrand <david@redhat.com> wrote:
>>>
>>> [...]
>>>   
>>>> :) I'm confused by the fact that you "expect_pgm_int()" but
>>>> actually don't expect one ...
>>>>
>>>> Please enlighten me why this isn't
>>>>
>>>> +	sclp_mark_busy();
>>>> +	h->length = 8;
>>>> +	sclp_setup_int();
>>>> +
>>>> +	asm volatile(
>>>> +		"       .insn   rre,0xb2204200,%1,%2\n"  /* servc
>>>> %1,%2 */
>>>> +		"       ipm     %0\n"
>>>> +		"       srl     %0,28"
>>>> +		: "=&d" (cc) : "d" (valid_code), "a"
>>>> (__pa(pagebuf))
>>>> +		: "cc", "memory");
>>>> +	if (!cc)
>>>> +		sclp_wait_busy();
>>>> +	report(cc == 0, "Instruction format ignored bits");
>>>>
>>>> I feel like I am missing something important.  
>>>
>>> because if we take an unexpected pgm interrupt:
>>> * the interrupt handler will write stuff on the console using SCLP
>>> * it will wait for the busy flag to be cleared before doing so
>>> * thus it will hang.
>>>
>>> this would be solved by adding special logic to the pgm interrupt
>>> handler (as we have discussed in your previous email)
>>>   
>>
>> I see, so the issue should hold for all SCLP checks where we don't
>> expect an exception ... hmmm
>  
> which is why my wrapper in the unit test is so complicated :)
> 

so .... if we would implement my suggestion (if we get an exception on a
servc instruction, clear sclp_busy) that code would get simplified as
well? :)

It would be really beneficial if we could rely on

expect_pgm_int()
...
check_pgm_int_code(whatever)

if we *expect an interrupt and none of that if we don't. So if it's a
matter of clearing sclp_busy on PGM exceptions, that shouldn't be too
hard ... but maybe I am missing something (haven't looked again at the
whole patch ...).

-- 
Thanks,

David / dhildenb


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test
  2020-01-13 16:06                   ` David Hildenbrand
@ 2020-01-13 16:17                     ` Claudio Imbrenda
  2020-01-15  9:57                       ` David Hildenbrand
  0 siblings, 1 reply; 19+ messages in thread
From: Claudio Imbrenda @ 2020-01-13 16:17 UTC (permalink / raw)
  To: David Hildenbrand; +Cc: kvm, linux-s390, thuth, borntraeger, frankja

On Mon, 13 Jan 2020 17:06:05 +0100
David Hildenbrand <david@redhat.com> wrote:

[...]

> >>> this would be solved by adding special logic to the pgm interrupt
> >>> handler (as we have discussed in your previous email)
> >>>     
> >>
> >> I see, so the issue should hold for all SCLP checks where we don't
> >> expect an exception ... hmmm  
> >  
> > which is why my wrapper in the unit test is so complicated :)
> >   
> 
> so .... if we would implement my suggestion (if we get an exception
> on a servc instruction, clear sclp_busy) that code would get
> simplified as well? :)

sure, as I said, that can be done. The question is if we really want to
change something in the interrupt handler (shared by all s390x unit
tests) just for the benefit of this one unit test.

Also consider that the changes to the interrupt handler would not
necessarily be trivial. i.e. you need to check that the origin of the
pgm interrupt is a SERVC instruction, and then act accordingly.


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test
  2020-01-13 16:17                     ` Claudio Imbrenda
@ 2020-01-15  9:57                       ` David Hildenbrand
  0 siblings, 0 replies; 19+ messages in thread
From: David Hildenbrand @ 2020-01-15  9:57 UTC (permalink / raw)
  To: Claudio Imbrenda; +Cc: kvm, linux-s390, thuth, borntraeger, frankja

On 13.01.20 17:17, Claudio Imbrenda wrote:
> On Mon, 13 Jan 2020 17:06:05 +0100
> David Hildenbrand <david@redhat.com> wrote:
> 
> [...]
> 
>>>>> this would be solved by adding special logic to the pgm interrupt
>>>>> handler (as we have discussed in your previous email)
>>>>>     
>>>>
>>>> I see, so the issue should hold for all SCLP checks where we don't
>>>> expect an exception ... hmmm  
>>>  
>>> which is why my wrapper in the unit test is so complicated :)
>>>   
>>
>> so .... if we would implement my suggestion (if we get an exception
>> on a servc instruction, clear sclp_busy) that code would get
>> simplified as well? :)
> 
> sure, as I said, that can be done. The question is if we really want to
> change something in the interrupt handler (shared by all s390x unit
> tests) just for the benefit of this one unit test.
> 
> Also consider that the changes to the interrupt handler would not
> necessarily be trivial. i.e. you need to check that the origin of the
> pgm interrupt is a SERVC instruction, and then act accordingly.
> 

I suggest something like the following:

diff --git a/lib/s390x/interrupt.c b/lib/s390x/interrupt.c
index 05f30be..d762e83 100644
--- a/lib/s390x/interrupt.c
+++ b/lib/s390x/interrupt.c
@@ -106,10 +106,17 @@ static void fixup_pgm_int(void)
 
 void handle_pgm_int(void)
 {
-       if (!pgm_int_expected)
+       if (!pgm_int_expected) {
+               /*
+                * If we get a PGM interrupt while having sclp_busy=true, we
+                * will loop forever. Just force sclp_busy=false to make
+                * progress here.
+                */
+               sclp_handle_ext();
                report_abort("Unexpected program interrupt: %d at %#lx, ilen %d\n",
                             lc->pgm_int_code, lc->pgm_old_psw.addr,
                             lc->pgm_int_id);
+       }
 
        pgm_int_expected = false;
        fixup_pgm_int();

Then this test could become something like (not sure about cc handling)

diff --git a/s390x/sclp.c b/s390x/sclp.c
index 10f0809..81c5a76 100644
--- a/s390x/sclp.c
+++ b/s390x/sclp.c
@@ -396,25 +396,18 @@ out:
 static void test_instbits(void)
 {
        SCCBHeader *h = (SCCBHeader *)pagebuf;
-       int cc;
 
-       expect_pgm_int();
        sclp_mark_busy();
        h->length = 8;
        sclp_setup_int();
 
        asm volatile(
-               "       .insn   rre,0xb2204200,%1,%2\n"  /* servc %1,%2 */
-               "       ipm     %0\n"
-               "       srl     %0,28"
-               : "=&d" (cc) : "d" (valid_code), "a" (__pa(pagebuf))
+               "       .insn   rre,0xb2204200,%0,%1\n"
+               :: "d" (valid_code), "a" (__pa(pagebuf))
                : "cc", "memory");
-       if (lc->pgm_int_code) {
-               sclp_handle_ext();
-               cc = 1;
-       } else if (!cc)
-               sclp_wait_busy();
-       report(cc == 0, "Instruction format ignored bits");
+       sclp_wait_busy();
+       report(true, "Instruction format ignored bits");
 }


This works correctly. E.g., adding a "*((uint8_t *)-50ul) = 2;"
after the sclp_setup_int(); - to quickly fake a PGM exception - makes the
test abort correctly:

FAIL sclp-1g (0 tests)
FAIL sclp-3g (0 tests)

ABORT: sclp: Unexpected program interrupt: 5 at 0x155e8, ilen 6

-- 
Thanks,

David / dhildenb


^ permalink raw reply	[flat|nested] 19+ messages in thread

end of thread, back to index

Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-10 18:40 [kvm-unit-tests PATCH v7 0/4] s390x: SCLP Unit test Claudio Imbrenda
2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 1/4] s390x: export sclp_setup_int Claudio Imbrenda
2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 2/4] s390x: sclp: add service call instruction wrapper Claudio Imbrenda
2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 3/4] s390x: lib: add SPX and STPX " Claudio Imbrenda
2020-01-13  9:42   ` Janosch Frank
2020-01-13 12:27     ` Claudio Imbrenda
2020-01-13 10:42   ` David Hildenbrand
2020-01-10 18:40 ` [kvm-unit-tests PATCH v7 4/4] s390x: SCLP unit test Claudio Imbrenda
2020-01-13 11:00   ` David Hildenbrand
2020-01-13 12:33     ` Claudio Imbrenda
2020-01-13 12:48       ` David Hildenbrand
2020-01-13 12:58         ` Claudio Imbrenda
2020-01-13 13:10           ` David Hildenbrand
2020-01-13 14:05             ` Claudio Imbrenda
2020-01-13 14:43               ` David Hildenbrand
2020-01-13 15:24                 ` Claudio Imbrenda
2020-01-13 16:06                   ` David Hildenbrand
2020-01-13 16:17                     ` Claudio Imbrenda
2020-01-15  9:57                       ` David Hildenbrand

KVM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvm/0 kvm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvm kvm/ https://lore.kernel.org/kvm \
		kvm@vger.kernel.org
	public-inbox-index kvm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.kvm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git