[PATCH 0/11] introduce down_write_killable for rw_semaphore

[PATCH 0/11] introduce down_write_killable for rw_semaphore

[Michal Hocko]

Hi,
I have posted this series [1] and there didn't seem to be any
fundamental objections except for x86 maintainers who preferred the asm
__down_write implementation which I have reworked for this series. Apart
from that I have refreshed on top of the current linux-next and fixed
one unused variable warning which happened to trigger a compilation
failure on ppc.

The following patchset implements a killable variant of write lock for
rw_semaphore. My usecase is to turn as many mmap_sem write users to use
a killable variant which will be helpful for the oom_reaper [2] to
asynchronously tear down the oom victim address space which requires
mmap_sem for read. This will reduce a likelihood of OOM livelocks caused
by oom victim being stuck on a lock or other resource which prevents it
to reach its exit path and release the memory. I haven't implemented
the killable variant of the read lock because I do not have any usecase
for this API.

The patchset is organized as follows.
- Patch 1 is a trivial cleanup
- Patch 2, I belive, shouldn't introduce any functional changes as per
  Documentation/memory-barriers.txt.
- Patch 3 is the preparatory work and necessary infrastructure for
  down_write_killable. It implements generic __down_write_killable
  and prepares the write lock slow path to bail out earlier when told so
- Patch 4-1- are implementing arch specific __down_write_killable. One
  patch per architecture.
- finally patch 11 implements down_write_killable and ties everything
  together. I am not really an expert on lockdep so I hope I got it right.

Many of arch specific patches are basically same and I can squash them
into one patch if this is preferred but I thought that one patch per
arch is preferable.

My patch to change mmap_sem write users to killable form is not part of
the series because it is a larger change and I would like to prevent
from spamming people too much. I will post the series shortly.

I have tested on x86 with OOM situations with high mmap_sem contention
(basically many parallel page faults racing with many parallel mmap/munmap
tight loops) so the waiters for the write locks are routinely interrupted
by SIGKILL.

Patches should apply cleanly on both Linus and next tree.

[1] http://lkml.kernel.org/r/1454444369-2146-1-git-send-email-mhocko@kernel.org
[2] http://lkml.kernel.org/r/1452094975-551-1-git-send-email-mhocko@kernel.org

Any feedback is highly appreciated.

[PATCH 01/11] locking, rwsem: get rid of __down_write_nested

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

This is no longer used anywhere and all callers (__down_write) use
0 as a subclass. Ditch __down_write_nested to make the code easier
to follow.

This shouldn't introduce any functional change.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/s390/include/asm/rwsem.h   | 7 +------
 arch/sh/include/asm/rwsem.h     | 5 -----
 arch/sparc/include/asm/rwsem.h  | 7 +------
 arch/x86/include/asm/rwsem.h    | 7 +------
 include/asm-generic/rwsem.h     | 7 +------
 include/linux/rwsem-spinlock.h  | 1 -
 kernel/locking/rwsem-spinlock.c | 7 +------
 7 files changed, 5 insertions(+), 36 deletions(-)

diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h
index 4b43ee7e6776..8e52e72f3efc 100644
--- a/arch/s390/include/asm/rwsem.h
+++ b/arch/s390/include/asm/rwsem.h
@@ -90,7 +90,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * lock for writing
  */
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+static inline void __down_write(struct rw_semaphore *sem)
 {
 	signed long old, new, tmp;
 
@@ -108,11 +108,6 @@ static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
 		rwsem_down_write_failed(sem);
 }
 
-static inline void __down_write(struct rw_semaphore *sem)
-{
-	__down_write_nested(sem, 0);
-}
-
 /*
  * trylock for writing -- returns 1 if successful, 0 if contention
  */
diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h
index edab57265293..a5104bebd1eb 100644
--- a/arch/sh/include/asm/rwsem.h
+++ b/arch/sh/include/asm/rwsem.h
@@ -114,11 +114,6 @@ static inline void __downgrade_write(struct rw_semaphore *sem)
 		rwsem_downgrade_wake(sem);
 }
 
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
-{
-	__down_write(sem);
-}
-
 /*
  * implement exchange and add functionality
  */
diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h
index 069bf4d663a1..e5a0d575bc7f 100644
--- a/arch/sparc/include/asm/rwsem.h
+++ b/arch/sparc/include/asm/rwsem.h
@@ -45,7 +45,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * lock for writing
  */
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+static inline void __down_write(struct rw_semaphore *sem)
 {
 	long tmp;
 
@@ -55,11 +55,6 @@ static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
 		rwsem_down_write_failed(sem);
 }
 
-static inline void __down_write(struct rw_semaphore *sem)
-{
-	__down_write_nested(sem, 0);
-}
-
 static inline int __down_write_trylock(struct rw_semaphore *sem)
 {
 	long tmp;
diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
index ceec86eb68e9..4a8292a0d6e1 100644
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -99,7 +99,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * lock for writing
  */
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+static inline void __down_write(struct rw_semaphore *sem)
 {
 	long tmp;
 	asm volatile("# beginning down_write\n\t"
@@ -116,11 +116,6 @@ static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
 		     : "memory", "cc");
 }
 
-static inline void __down_write(struct rw_semaphore *sem)
-{
-	__down_write_nested(sem, 0);
-}
-
 /*
  * trylock for writing -- returns 1 if successful, 0 if contention
  */
diff --git a/include/asm-generic/rwsem.h b/include/asm-generic/rwsem.h
index d6d5dc98d7da..b8d8a6cf4ca8 100644
--- a/include/asm-generic/rwsem.h
+++ b/include/asm-generic/rwsem.h
@@ -53,7 +53,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * lock for writing
  */
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+static inline void __down_write(struct rw_semaphore *sem)
 {
 	long tmp;
 
@@ -63,11 +63,6 @@ static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
 		rwsem_down_write_failed(sem);
 }
 
-static inline void __down_write(struct rw_semaphore *sem)
-{
-	__down_write_nested(sem, 0);
-}
-
 static inline int __down_write_trylock(struct rw_semaphore *sem)
 {
 	long tmp;
diff --git a/include/linux/rwsem-spinlock.h b/include/linux/rwsem-spinlock.h
index 561e8615528d..a733a5467e6c 100644
--- a/include/linux/rwsem-spinlock.h
+++ b/include/linux/rwsem-spinlock.h
@@ -34,7 +34,6 @@ struct rw_semaphore {
 extern void __down_read(struct rw_semaphore *sem);
 extern int __down_read_trylock(struct rw_semaphore *sem);
 extern void __down_write(struct rw_semaphore *sem);
-extern void __down_write_nested(struct rw_semaphore *sem, int subclass);
 extern int __down_write_trylock(struct rw_semaphore *sem);
 extern void __up_read(struct rw_semaphore *sem);
 extern void __up_write(struct rw_semaphore *sem);
diff --git a/kernel/locking/rwsem-spinlock.c b/kernel/locking/rwsem-spinlock.c
index 3a5048572065..bab26104a5d0 100644
--- a/kernel/locking/rwsem-spinlock.c
+++ b/kernel/locking/rwsem-spinlock.c
@@ -191,7 +191,7 @@ int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * get a write lock on the semaphore
  */
-void __sched __down_write_nested(struct rw_semaphore *sem, int subclass)
+void __sched __down_write(struct rw_semaphore *sem)
 {
 	struct rwsem_waiter waiter;
 	struct task_struct *tsk;
@@ -227,11 +227,6 @@ void __sched __down_write_nested(struct rw_semaphore *sem, int subclass)
 	raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
 }
 
-void __sched __down_write(struct rw_semaphore *sem)
-{
-	__down_write_nested(sem, 0);
-}
-
 /*
  * trylock for writing -- returns 1 if successful, 0 if contention
  */
-- 
2.7.0

[PATCH 02/11] locking, rwsem: drop explicit memory barriers

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

sh and xtensa seem to be the only architectures which use explicit
memory barriers for rw_semaphore operations even though they are not
really needed because there is the full memory barrier is always implied
by atomic_{inc,dec,add,sub}_return resp. cmpxchg. Remove them.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/sh/include/asm/rwsem.h     | 14 ++------------
 arch/xtensa/include/asm/rwsem.h | 14 ++------------
 2 files changed, 4 insertions(+), 24 deletions(-)

diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h
index a5104bebd1eb..f6c951c7a875 100644
--- a/arch/sh/include/asm/rwsem.h
+++ b/arch/sh/include/asm/rwsem.h
@@ -24,9 +24,7 @@
  */
 static inline void __down_read(struct rw_semaphore *sem)
 {
-	if (atomic_inc_return((atomic_t *)(&sem->count)) > 0)
-		smp_wmb();
-	else
+	if (atomic_inc_return((atomic_t *)(&sem->count)) <= 0)
 		rwsem_down_read_failed(sem);
 }
 
@@ -37,7 +35,6 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 	while ((tmp = sem->count) >= 0) {
 		if (tmp == cmpxchg(&sem->count, tmp,
 				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
-			smp_wmb();
 			return 1;
 		}
 	}
@@ -53,9 +50,7 @@ static inline void __down_write(struct rw_semaphore *sem)
 
 	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
 				(atomic_t *)(&sem->count));
-	if (tmp == RWSEM_ACTIVE_WRITE_BIAS)
-		smp_wmb();
-	else
+	if (tmp != RWSEM_ACTIVE_WRITE_BIAS)
 		rwsem_down_write_failed(sem);
 }
 
@@ -65,7 +60,6 @@ static inline int __down_write_trylock(struct rw_semaphore *sem)
 
 	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
 		      RWSEM_ACTIVE_WRITE_BIAS);
-	smp_wmb();
 	return tmp == RWSEM_UNLOCKED_VALUE;
 }
 
@@ -76,7 +70,6 @@ static inline void __up_read(struct rw_semaphore *sem)
 {
 	int tmp;
 
-	smp_wmb();
 	tmp = atomic_dec_return((atomic_t *)(&sem->count));
 	if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)
 		rwsem_wake(sem);
@@ -87,7 +80,6 @@ static inline void __up_read(struct rw_semaphore *sem)
  */
 static inline void __up_write(struct rw_semaphore *sem)
 {
-	smp_wmb();
 	if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
 			      (atomic_t *)(&sem->count)) < 0)
 		rwsem_wake(sem);
@@ -108,7 +100,6 @@ static inline void __downgrade_write(struct rw_semaphore *sem)
 {
 	int tmp;
 
-	smp_wmb();
 	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
 	if (tmp < 0)
 		rwsem_downgrade_wake(sem);
@@ -119,7 +110,6 @@ static inline void __downgrade_write(struct rw_semaphore *sem)
  */
 static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
 {
-	smp_mb();
 	return atomic_add_return(delta, (atomic_t *)(&sem->count));
 }
 
diff --git a/arch/xtensa/include/asm/rwsem.h b/arch/xtensa/include/asm/rwsem.h
index 249619e7e7f2..593483f6e1ff 100644
--- a/arch/xtensa/include/asm/rwsem.h
+++ b/arch/xtensa/include/asm/rwsem.h
@@ -29,9 +29,7 @@
  */
 static inline void __down_read(struct rw_semaphore *sem)
 {
-	if (atomic_add_return(1,(atomic_t *)(&sem->count)) > 0)
-		smp_wmb();
-	else
+	if (atomic_add_return(1,(atomic_t *)(&sem->count)) <= 0)
 		rwsem_down_read_failed(sem);
 }
 
@@ -42,7 +40,6 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 	while ((tmp = sem->count) >= 0) {
 		if (tmp == cmpxchg(&sem->count, tmp,
 				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
-			smp_wmb();
 			return 1;
 		}
 	}
@@ -58,9 +55,7 @@ static inline void __down_write(struct rw_semaphore *sem)
 
 	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
 				(atomic_t *)(&sem->count));
-	if (tmp == RWSEM_ACTIVE_WRITE_BIAS)
-		smp_wmb();
-	else
+	if (tmp != RWSEM_ACTIVE_WRITE_BIAS)
 		rwsem_down_write_failed(sem);
 }
 
@@ -70,7 +65,6 @@ static inline int __down_write_trylock(struct rw_semaphore *sem)
 
 	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
 		      RWSEM_ACTIVE_WRITE_BIAS);
-	smp_wmb();
 	return tmp == RWSEM_UNLOCKED_VALUE;
 }
 
@@ -81,7 +75,6 @@ static inline void __up_read(struct rw_semaphore *sem)
 {
 	int tmp;
 
-	smp_wmb();
 	tmp = atomic_sub_return(1,(atomic_t *)(&sem->count));
 	if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)
 		rwsem_wake(sem);
@@ -92,7 +85,6 @@ static inline void __up_read(struct rw_semaphore *sem)
  */
 static inline void __up_write(struct rw_semaphore *sem)
 {
-	smp_wmb();
 	if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
 			      (atomic_t *)(&sem->count)) < 0)
 		rwsem_wake(sem);
@@ -113,7 +105,6 @@ static inline void __downgrade_write(struct rw_semaphore *sem)
 {
 	int tmp;
 
-	smp_wmb();
 	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
 	if (tmp < 0)
 		rwsem_downgrade_wake(sem);
@@ -124,7 +115,6 @@ static inline void __downgrade_write(struct rw_semaphore *sem)
  */
 static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
 {
-	smp_mb();
 	return atomic_add_return(delta, (atomic_t *)(&sem->count));
 }
 
-- 
2.7.0

[PATCH 02/11] locking, rwsem: drop explicit memory barriers

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

sh and xtensa seem to be the only architectures which use explicit
memory barriers for rw_semaphore operations even though they are not
really needed because there is the full memory barrier is always implied
by atomic_{inc,dec,add,sub}_return resp. cmpxchg. Remove them.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/sh/include/asm/rwsem.h     | 14 ++------------
 arch/xtensa/include/asm/rwsem.h | 14 ++------------
 2 files changed, 4 insertions(+), 24 deletions(-)

diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h
index a5104bebd1eb..f6c951c7a875 100644
--- a/arch/sh/include/asm/rwsem.h
+++ b/arch/sh/include/asm/rwsem.h
@@ -24,9 +24,7 @@
  */
 static inline void __down_read(struct rw_semaphore *sem)
 {
-	if (atomic_inc_return((atomic_t *)(&sem->count)) > 0)
-		smp_wmb();
-	else
+	if (atomic_inc_return((atomic_t *)(&sem->count)) <= 0)
 		rwsem_down_read_failed(sem);
 }
 
@@ -37,7 +35,6 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 	while ((tmp = sem->count) >= 0) {
 		if (tmp == cmpxchg(&sem->count, tmp,
 				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
-			smp_wmb();
 			return 1;
 		}
 	}
@@ -53,9 +50,7 @@ static inline void __down_write(struct rw_semaphore *sem)
 
 	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
 				(atomic_t *)(&sem->count));
-	if (tmp == RWSEM_ACTIVE_WRITE_BIAS)
-		smp_wmb();
-	else
+	if (tmp != RWSEM_ACTIVE_WRITE_BIAS)
 		rwsem_down_write_failed(sem);
 }
 
@@ -65,7 +60,6 @@ static inline int __down_write_trylock(struct rw_semaphore *sem)
 
 	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
 		      RWSEM_ACTIVE_WRITE_BIAS);
-	smp_wmb();
 	return tmp == RWSEM_UNLOCKED_VALUE;
 }
 
@@ -76,7 +70,6 @@ static inline void __up_read(struct rw_semaphore *sem)
 {
 	int tmp;
 
-	smp_wmb();
 	tmp = atomic_dec_return((atomic_t *)(&sem->count));
 	if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)
 		rwsem_wake(sem);
@@ -87,7 +80,6 @@ static inline void __up_read(struct rw_semaphore *sem)
  */
 static inline void __up_write(struct rw_semaphore *sem)
 {
-	smp_wmb();
 	if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
 			      (atomic_t *)(&sem->count)) < 0)
 		rwsem_wake(sem);
@@ -108,7 +100,6 @@ static inline void __downgrade_write(struct rw_semaphore *sem)
 {
 	int tmp;
 
-	smp_wmb();
 	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
 	if (tmp < 0)
 		rwsem_downgrade_wake(sem);
@@ -119,7 +110,6 @@ static inline void __downgrade_write(struct rw_semaphore *sem)
  */
 static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
 {
-	smp_mb();
 	return atomic_add_return(delta, (atomic_t *)(&sem->count));
 }
 
diff --git a/arch/xtensa/include/asm/rwsem.h b/arch/xtensa/include/asm/rwsem.h
index 249619e7e7f2..593483f6e1ff 100644
--- a/arch/xtensa/include/asm/rwsem.h
+++ b/arch/xtensa/include/asm/rwsem.h
@@ -29,9 +29,7 @@
  */
 static inline void __down_read(struct rw_semaphore *sem)
 {
-	if (atomic_add_return(1,(atomic_t *)(&sem->count)) > 0)
-		smp_wmb();
-	else
+	if (atomic_add_return(1,(atomic_t *)(&sem->count)) <= 0)
 		rwsem_down_read_failed(sem);
 }
 
@@ -42,7 +40,6 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 	while ((tmp = sem->count) >= 0) {
 		if (tmp == cmpxchg(&sem->count, tmp,
 				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
-			smp_wmb();
 			return 1;
 		}
 	}
@@ -58,9 +55,7 @@ static inline void __down_write(struct rw_semaphore *sem)
 
 	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
 				(atomic_t *)(&sem->count));
-	if (tmp == RWSEM_ACTIVE_WRITE_BIAS)
-		smp_wmb();
-	else
+	if (tmp != RWSEM_ACTIVE_WRITE_BIAS)
 		rwsem_down_write_failed(sem);
 }
 
@@ -70,7 +65,6 @@ static inline int __down_write_trylock(struct rw_semaphore *sem)
 
 	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
 		      RWSEM_ACTIVE_WRITE_BIAS);
-	smp_wmb();
 	return tmp == RWSEM_UNLOCKED_VALUE;
 }
 
@@ -81,7 +75,6 @@ static inline void __up_read(struct rw_semaphore *sem)
 {
 	int tmp;
 
-	smp_wmb();
 	tmp = atomic_sub_return(1,(atomic_t *)(&sem->count));
 	if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)
 		rwsem_wake(sem);
@@ -92,7 +85,6 @@ static inline void __up_read(struct rw_semaphore *sem)
  */
 static inline void __up_write(struct rw_semaphore *sem)
 {
-	smp_wmb();
 	if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
 			      (atomic_t *)(&sem->count)) < 0)
 		rwsem_wake(sem);
@@ -113,7 +105,6 @@ static inline void __downgrade_write(struct rw_semaphore *sem)
 {
 	int tmp;
 
-	smp_wmb();
 	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
 	if (tmp < 0)
 		rwsem_downgrade_wake(sem);
@@ -124,7 +115,6 @@ static inline void __downgrade_write(struct rw_semaphore *sem)
  */
 static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
 {
-	smp_mb();
 	return atomic_add_return(delta, (atomic_t *)(&sem->count));
 }
 
-- 
2.7.0

[PATCH 03/11] locking, rwsem: introduce basis for down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

Introduce a generic implementation necessary for down_write_killable.
This is a trivial extension of the already existing down_write call
which can be interrupted by SIGKILL.  This patch doesn't provide
down_write_killable yet because arches have to provide the necessary
pieces before.

rwsem_down_write_failed which is a generic slow path for the
write lock is extended to allow a task state and renamed to
__rwsem_down_write_failed_state. The return value is either a valid
semaphore pointer or ERR_PTR(-EINTR).

rwsem_down_write_failed_killable is exported as a new way to wait for
the lock and be killable.

For rwsem-spinlock implementation the current __down_write it updated
in a similar way as __rwsem_down_write_failed_state except it doesn't
need new exports just visible __down_write_killable.

Architectures which are not using the generic rwsem implementation are
supposed to provide their __down_write_killable implementation and
use rwsem_down_write_failed_killable for the slow path.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 include/asm-generic/rwsem.h     | 12 ++++++++++++
 include/linux/rwsem-spinlock.h  |  1 +
 include/linux/rwsem.h           |  2 ++
 kernel/locking/rwsem-spinlock.c | 23 +++++++++++++++++++++--
 kernel/locking/rwsem-xadd.c     | 31 +++++++++++++++++++++++++------
 5 files changed, 61 insertions(+), 8 deletions(-)

diff --git a/include/asm-generic/rwsem.h b/include/asm-generic/rwsem.h
index b8d8a6cf4ca8..3fc94a046bf5 100644
--- a/include/asm-generic/rwsem.h
+++ b/include/asm-generic/rwsem.h
@@ -63,6 +63,18 @@ static inline void __down_write(struct rw_semaphore *sem)
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	long tmp;
+
+	tmp = atomic_long_add_return_acquire(RWSEM_ACTIVE_WRITE_BIAS,
+				     (atomic_long_t *)&sem->count);
+	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+	return 0;
+}
+
 static inline int __down_write_trylock(struct rw_semaphore *sem)
 {
 	long tmp;
diff --git a/include/linux/rwsem-spinlock.h b/include/linux/rwsem-spinlock.h
index a733a5467e6c..ae0528b834cd 100644
--- a/include/linux/rwsem-spinlock.h
+++ b/include/linux/rwsem-spinlock.h
@@ -34,6 +34,7 @@ struct rw_semaphore {
 extern void __down_read(struct rw_semaphore *sem);
 extern int __down_read_trylock(struct rw_semaphore *sem);
 extern void __down_write(struct rw_semaphore *sem);
+extern int __must_check __down_write_killable(struct rw_semaphore *sem);
 extern int __down_write_trylock(struct rw_semaphore *sem);
 extern void __up_read(struct rw_semaphore *sem);
 extern void __up_write(struct rw_semaphore *sem);
diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h
index 8f498cdde280..7d7ae029dac5 100644
--- a/include/linux/rwsem.h
+++ b/include/linux/rwsem.h
@@ -14,6 +14,7 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/atomic.h>
+#include <linux/err.h>
 #ifdef CONFIG_RWSEM_SPIN_ON_OWNER
 #include <linux/osq_lock.h>
 #endif
@@ -43,6 +44,7 @@ struct rw_semaphore {
 
 extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
 extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed_killable(struct rw_semaphore *sem);
 extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
 extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
 
diff --git a/kernel/locking/rwsem-spinlock.c b/kernel/locking/rwsem-spinlock.c
index bab26104a5d0..d1d04ca10d0e 100644
--- a/kernel/locking/rwsem-spinlock.c
+++ b/kernel/locking/rwsem-spinlock.c
@@ -191,11 +191,12 @@ int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * get a write lock on the semaphore
  */
-void __sched __down_write(struct rw_semaphore *sem)
+int __sched __down_write_state(struct rw_semaphore *sem, int state)
 {
 	struct rwsem_waiter waiter;
 	struct task_struct *tsk;
 	unsigned long flags;
+	int ret = 0;
 
 	raw_spin_lock_irqsave(&sem->wait_lock, flags);
 
@@ -215,16 +216,34 @@ void __sched __down_write(struct rw_semaphore *sem)
 		 */
 		if (sem->count == 0)
 			break;
-		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+		set_task_state(tsk, state);
 		raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
 		schedule();
+		if (signal_pending_state(state, current)) {
+			ret = -EINTR;
+			raw_spin_lock_irqsave(&sem->wait_lock, flags);
+			goto out;
+		}
 		raw_spin_lock_irqsave(&sem->wait_lock, flags);
 	}
 	/* got the lock */
 	sem->count = -1;
+out:
 	list_del(&waiter.list);
 
 	raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+	return ret;
+}
+
+void __sched __down_write(struct rw_semaphore *sem)
+{
+	__down_write_state(sem, TASK_UNINTERRUPTIBLE);
+}
+
+int __sched __down_write_killable(struct rw_semaphore *sem)
+{
+	return __down_write_state(sem, TASK_KILLABLE);
 }
 
 /*
diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c
index a4d4de05b2d1..5cec34f1ad6f 100644
--- a/kernel/locking/rwsem-xadd.c
+++ b/kernel/locking/rwsem-xadd.c
@@ -433,12 +433,13 @@ static inline bool rwsem_has_spinner(struct rw_semaphore *sem)
 /*
  * Wait until we successfully acquire the write lock
  */
-__visible
-struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
+static inline struct rw_semaphore *
+__rwsem_down_write_failed_state(struct rw_semaphore *sem, int state)
 {
 	long count;
 	bool waiting = true; /* any queued threads before us */
 	struct rwsem_waiter waiter;
+	struct rw_semaphore *ret = sem;
 
 	/* undo write bias from down_write operation, stop active locking */
 	count = rwsem_atomic_update(-RWSEM_ACTIVE_WRITE_BIAS, sem);
@@ -478,7 +479,7 @@ struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
 		count = rwsem_atomic_update(RWSEM_WAITING_BIAS, sem);
 
 	/* wait until we successfully acquire the lock */
-	set_current_state(TASK_UNINTERRUPTIBLE);
+	set_current_state(state);
 	while (true) {
 		if (rwsem_try_write_lock(count, sem))
 			break;
@@ -487,20 +488,38 @@ struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
 		/* Block until there are no active lockers. */
 		do {
 			schedule();
-			set_current_state(TASK_UNINTERRUPTIBLE);
+			if (signal_pending_state(state, current)) {
+				raw_spin_lock_irq(&sem->wait_lock);
+				ret = ERR_PTR(-EINTR);
+				goto out;
+			}
+			set_current_state(state);
 		} while ((count = sem->count) & RWSEM_ACTIVE_MASK);
 
 		raw_spin_lock_irq(&sem->wait_lock);
 	}
 	__set_current_state(TASK_RUNNING);
-
+out:
 	list_del(&waiter.list);
 	raw_spin_unlock_irq(&sem->wait_lock);
 
-	return sem;
+	return ret;
+}
+
+__visible struct rw_semaphore * __sched
+rwsem_down_write_failed(struct rw_semaphore *sem)
+{
+	return __rwsem_down_write_failed_state(sem, TASK_UNINTERRUPTIBLE);
 }
 EXPORT_SYMBOL(rwsem_down_write_failed);
 
+__visible struct rw_semaphore * __sched
+rwsem_down_write_failed_killable(struct rw_semaphore *sem)
+{
+	return __rwsem_down_write_failed_state(sem, TASK_KILLABLE);
+}
+EXPORT_SYMBOL(rwsem_down_write_failed_killable);
+
 /*
  * handle waking up a waiter on the semaphore
  * - up_read/up_write has decremented the active part of count if we come here
-- 
2.7.0

[PATCH 03/11] locking, rwsem: introduce basis for down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

Introduce a generic implementation necessary for down_write_killable.
This is a trivial extension of the already existing down_write call
which can be interrupted by SIGKILL.  This patch doesn't provide
down_write_killable yet because arches have to provide the necessary
pieces before.

rwsem_down_write_failed which is a generic slow path for the
write lock is extended to allow a task state and renamed to
__rwsem_down_write_failed_state. The return value is either a valid
semaphore pointer or ERR_PTR(-EINTR).

rwsem_down_write_failed_killable is exported as a new way to wait for
the lock and be killable.

For rwsem-spinlock implementation the current __down_write it updated
in a similar way as __rwsem_down_write_failed_state except it doesn't
need new exports just visible __down_write_killable.

Architectures which are not using the generic rwsem implementation are
supposed to provide their __down_write_killable implementation and
use rwsem_down_write_failed_killable for the slow path.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 include/asm-generic/rwsem.h     | 12 ++++++++++++
 include/linux/rwsem-spinlock.h  |  1 +
 include/linux/rwsem.h           |  2 ++
 kernel/locking/rwsem-spinlock.c | 23 +++++++++++++++++++++--
 kernel/locking/rwsem-xadd.c     | 31 +++++++++++++++++++++++++------
 5 files changed, 61 insertions(+), 8 deletions(-)

diff --git a/include/asm-generic/rwsem.h b/include/asm-generic/rwsem.h
index b8d8a6cf4ca8..3fc94a046bf5 100644
--- a/include/asm-generic/rwsem.h
+++ b/include/asm-generic/rwsem.h
@@ -63,6 +63,18 @@ static inline void __down_write(struct rw_semaphore *sem)
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	long tmp;
+
+	tmp = atomic_long_add_return_acquire(RWSEM_ACTIVE_WRITE_BIAS,
+				     (atomic_long_t *)&sem->count);
+	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+	return 0;
+}
+
 static inline int __down_write_trylock(struct rw_semaphore *sem)
 {
 	long tmp;
diff --git a/include/linux/rwsem-spinlock.h b/include/linux/rwsem-spinlock.h
index a733a5467e6c..ae0528b834cd 100644
--- a/include/linux/rwsem-spinlock.h
+++ b/include/linux/rwsem-spinlock.h
@@ -34,6 +34,7 @@ struct rw_semaphore {
 extern void __down_read(struct rw_semaphore *sem);
 extern int __down_read_trylock(struct rw_semaphore *sem);
 extern void __down_write(struct rw_semaphore *sem);
+extern int __must_check __down_write_killable(struct rw_semaphore *sem);
 extern int __down_write_trylock(struct rw_semaphore *sem);
 extern void __up_read(struct rw_semaphore *sem);
 extern void __up_write(struct rw_semaphore *sem);
diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h
index 8f498cdde280..7d7ae029dac5 100644
--- a/include/linux/rwsem.h
+++ b/include/linux/rwsem.h
@@ -14,6 +14,7 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/atomic.h>
+#include <linux/err.h>
 #ifdef CONFIG_RWSEM_SPIN_ON_OWNER
 #include <linux/osq_lock.h>
 #endif
@@ -43,6 +44,7 @@ struct rw_semaphore {
 
 extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
 extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed_killable(struct rw_semaphore *sem);
 extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
 extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
 
diff --git a/kernel/locking/rwsem-spinlock.c b/kernel/locking/rwsem-spinlock.c
index bab26104a5d0..d1d04ca10d0e 100644
--- a/kernel/locking/rwsem-spinlock.c
+++ b/kernel/locking/rwsem-spinlock.c
@@ -191,11 +191,12 @@ int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * get a write lock on the semaphore
  */
-void __sched __down_write(struct rw_semaphore *sem)
+int __sched __down_write_state(struct rw_semaphore *sem, int state)
 {
 	struct rwsem_waiter waiter;
 	struct task_struct *tsk;
 	unsigned long flags;
+	int ret = 0;
 
 	raw_spin_lock_irqsave(&sem->wait_lock, flags);
 
@@ -215,16 +216,34 @@ void __sched __down_write(struct rw_semaphore *sem)
 		 */
 		if (sem->count == 0)
 			break;
-		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+		set_task_state(tsk, state);
 		raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
 		schedule();
+		if (signal_pending_state(state, current)) {
+			ret = -EINTR;
+			raw_spin_lock_irqsave(&sem->wait_lock, flags);
+			goto out;
+		}
 		raw_spin_lock_irqsave(&sem->wait_lock, flags);
 	}
 	/* got the lock */
 	sem->count = -1;
+out:
 	list_del(&waiter.list);
 
 	raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+	return ret;
+}
+
+void __sched __down_write(struct rw_semaphore *sem)
+{
+	__down_write_state(sem, TASK_UNINTERRUPTIBLE);
+}
+
+int __sched __down_write_killable(struct rw_semaphore *sem)
+{
+	return __down_write_state(sem, TASK_KILLABLE);
 }
 
 /*
diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c
index a4d4de05b2d1..5cec34f1ad6f 100644
--- a/kernel/locking/rwsem-xadd.c
+++ b/kernel/locking/rwsem-xadd.c
@@ -433,12 +433,13 @@ static inline bool rwsem_has_spinner(struct rw_semaphore *sem)
 /*
  * Wait until we successfully acquire the write lock
  */
-__visible
-struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
+static inline struct rw_semaphore *
+__rwsem_down_write_failed_state(struct rw_semaphore *sem, int state)
 {
 	long count;
 	bool waiting = true; /* any queued threads before us */
 	struct rwsem_waiter waiter;
+	struct rw_semaphore *ret = sem;
 
 	/* undo write bias from down_write operation, stop active locking */
 	count = rwsem_atomic_update(-RWSEM_ACTIVE_WRITE_BIAS, sem);
@@ -478,7 +479,7 @@ struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
 		count = rwsem_atomic_update(RWSEM_WAITING_BIAS, sem);
 
 	/* wait until we successfully acquire the lock */
-	set_current_state(TASK_UNINTERRUPTIBLE);
+	set_current_state(state);
 	while (true) {
 		if (rwsem_try_write_lock(count, sem))
 			break;
@@ -487,20 +488,38 @@ struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
 		/* Block until there are no active lockers. */
 		do {
 			schedule();
-			set_current_state(TASK_UNINTERRUPTIBLE);
+			if (signal_pending_state(state, current)) {
+				raw_spin_lock_irq(&sem->wait_lock);
+				ret = ERR_PTR(-EINTR);
+				goto out;
+			}
+			set_current_state(state);
 		} while ((count = sem->count) & RWSEM_ACTIVE_MASK);
 
 		raw_spin_lock_irq(&sem->wait_lock);
 	}
 	__set_current_state(TASK_RUNNING);
-
+out:
 	list_del(&waiter.list);
 	raw_spin_unlock_irq(&sem->wait_lock);
 
-	return sem;
+	return ret;
+}
+
+__visible struct rw_semaphore * __sched
+rwsem_down_write_failed(struct rw_semaphore *sem)
+{
+	return __rwsem_down_write_failed_state(sem, TASK_UNINTERRUPTIBLE);
 }
 EXPORT_SYMBOL(rwsem_down_write_failed);
 
+__visible struct rw_semaphore * __sched
+rwsem_down_write_failed_killable(struct rw_semaphore *sem)
+{
+	return __rwsem_down_write_failed_state(sem, TASK_KILLABLE);
+}
+EXPORT_SYMBOL(rwsem_down_write_failed_killable);
+
 /*
  * handle waking up a waiter on the semaphore
  * - up_read/up_write has decremented the active part of count if we come here
-- 
2.7.0

[PATCH 04/11] alpha, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

Introduce ___down_write for the fast path and reuse it for __down_write
resp. __down_write_killable each using the respective generic slow path
(rwsem_down_write_failed resp. rwsem_down_write_failed_killable).

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/alpha/include/asm/rwsem.h | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/alpha/include/asm/rwsem.h b/arch/alpha/include/asm/rwsem.h
index a83bbea62c67..0131a7058778 100644
--- a/arch/alpha/include/asm/rwsem.h
+++ b/arch/alpha/include/asm/rwsem.h
@@ -63,7 +63,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 	return res >= 0 ? 1 : 0;
 }
 
-static inline void __down_write(struct rw_semaphore *sem)
+static inline long ___down_write(struct rw_semaphore *sem)
 {
 	long oldcount;
 #ifndef	CONFIG_SMP
@@ -83,10 +83,24 @@ static inline void __down_write(struct rw_semaphore *sem)
 	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
 	:"Ir" (RWSEM_ACTIVE_WRITE_BIAS), "m" (sem->count) : "memory");
 #endif
-	if (unlikely(oldcount))
+	return oldcount;
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	if (unlikely(___down_write(sem)))
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	if (unlikely(___down_write(sem)))
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+
+	return 0;
+}
+
 /*
  * trylock for writing -- returns 1 if successful, 0 if contention
  */
-- 
2.7.0

[PATCH 05/11] ia64, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

Introduce ___down_write for the fast path and reuse it for __down_write
resp. __down_write_killable each using the respective generic slow path
(rwsem_down_write_failed resp. rwsem_down_write_failed_killable).

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/ia64/include/asm/rwsem.h | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/arch/ia64/include/asm/rwsem.h b/arch/ia64/include/asm/rwsem.h
index 3027e7516d85..5e78cb40d9df 100644
--- a/arch/ia64/include/asm/rwsem.h
+++ b/arch/ia64/include/asm/rwsem.h
@@ -49,8 +49,8 @@ __down_read (struct rw_semaphore *sem)
 /*
  * lock for writing
  */
-static inline void
-__down_write (struct rw_semaphore *sem)
+static inline long
+___down_write (struct rw_semaphore *sem)
 {
 	long old, new;
 
@@ -59,10 +59,26 @@ __down_write (struct rw_semaphore *sem)
 		new = old + RWSEM_ACTIVE_WRITE_BIAS;
 	} while (cmpxchg_acq(&sem->count, old, new) != old);
 
-	if (old != 0)
+	return old;
+}
+
+static inline void
+__down_write (struct rw_semaphore *sem)
+{
+	if (___down_write(sem))
 		rwsem_down_write_failed(sem);
 }
 
+static inline int
+__down_write_killable (struct rw_semaphore *sem)
+{
+	if (___down_write(sem))
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+
+	return 0;
+}
+
 /*
  * unlock after reading
  */
-- 
2.7.0

[PATCH 05/11] ia64, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

Introduce ___down_write for the fast path and reuse it for __down_write
resp. __down_write_killable each using the respective generic slow path
(rwsem_down_write_failed resp. rwsem_down_write_failed_killable).

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/ia64/include/asm/rwsem.h | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/arch/ia64/include/asm/rwsem.h b/arch/ia64/include/asm/rwsem.h
index 3027e7516d85..5e78cb40d9df 100644
--- a/arch/ia64/include/asm/rwsem.h
+++ b/arch/ia64/include/asm/rwsem.h
@@ -49,8 +49,8 @@ __down_read (struct rw_semaphore *sem)
 /*
  * lock for writing
  */
-static inline void
-__down_write (struct rw_semaphore *sem)
+static inline long
+___down_write (struct rw_semaphore *sem)
 {
 	long old, new;
 
@@ -59,10 +59,26 @@ __down_write (struct rw_semaphore *sem)
 		new = old + RWSEM_ACTIVE_WRITE_BIAS;
 	} while (cmpxchg_acq(&sem->count, old, new) != old);
 
-	if (old != 0)
+	return old;
+}
+
+static inline void
+__down_write (struct rw_semaphore *sem)
+{
+	if (___down_write(sem))
 		rwsem_down_write_failed(sem);
 }
 
+static inline int
+__down_write_killable (struct rw_semaphore *sem)
+{
+	if (___down_write(sem))
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+
+	return 0;
+}
+
 /*
  * unlock after reading
  */
-- 
2.7.0

[PATCH 06/11] s390, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

Introduce ___down_write for the fast path and reuse it for __down_write
resp. __down_write_killable each using the respective generic slow path
(rwsem_down_write_failed resp. rwsem_down_write_failed_killable).

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/s390/include/asm/rwsem.h | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h
index 8e52e72f3efc..8e7b2b7e10f3 100644
--- a/arch/s390/include/asm/rwsem.h
+++ b/arch/s390/include/asm/rwsem.h
@@ -90,7 +90,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * lock for writing
  */
-static inline void __down_write(struct rw_semaphore *sem)
+static inline long ___down_write(struct rw_semaphore *sem)
 {
 	signed long old, new, tmp;
 
@@ -104,10 +104,25 @@ static inline void __down_write(struct rw_semaphore *sem)
 		: "=&d" (old), "=&d" (new), "=Q" (sem->count)
 		: "Q" (sem->count), "m" (tmp)
 		: "cc", "memory");
-	if (old != 0)
+
+	return old;
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	if (___down_write(sem))
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	if (___down_write(sem))
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+
+	return 0;
+}
+
 /*
  * trylock for writing -- returns 1 if successful, 0 if contention
  */
-- 
2.7.0

[PATCH 06/11] s390, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

Introduce ___down_write for the fast path and reuse it for __down_write
resp. __down_write_killable each using the respective generic slow path
(rwsem_down_write_failed resp. rwsem_down_write_failed_killable).

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/s390/include/asm/rwsem.h | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h
index 8e52e72f3efc..8e7b2b7e10f3 100644
--- a/arch/s390/include/asm/rwsem.h
+++ b/arch/s390/include/asm/rwsem.h
@@ -90,7 +90,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * lock for writing
  */
-static inline void __down_write(struct rw_semaphore *sem)
+static inline long ___down_write(struct rw_semaphore *sem)
 {
 	signed long old, new, tmp;
 
@@ -104,10 +104,25 @@ static inline void __down_write(struct rw_semaphore *sem)
 		: "=&d" (old), "=&d" (new), "=Q" (sem->count)
 		: "Q" (sem->count), "m" (tmp)
 		: "cc", "memory");
-	if (old != 0)
+
+	return old;
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	if (___down_write(sem))
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	if (___down_write(sem))
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+
+	return 0;
+}
+
 /*
  * trylock for writing -- returns 1 if successful, 0 if contention
  */
-- 
2.7.0

[PATCH 07/11] sh, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

which uses the same fast path as __down_write except it falls back to
rwsem_down_write_failed_killable slow path and return -EINTR if killed.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/sh/include/asm/rwsem.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h
index f6c951c7a875..8a457b83d2a5 100644
--- a/arch/sh/include/asm/rwsem.h
+++ b/arch/sh/include/asm/rwsem.h
@@ -54,6 +54,19 @@ static inline void __down_write(struct rw_semaphore *sem)
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (tmp != RWSEM_ACTIVE_WRITE_BIAS)
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+
+	return 0;
+}
+
 static inline int __down_write_trylock(struct rw_semaphore *sem)
 {
 	int tmp;
-- 
2.7.0

[PATCH 07/11] sh, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

which uses the same fast path as __down_write except it falls back to
rwsem_down_write_failed_killable slow path and return -EINTR if killed.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/sh/include/asm/rwsem.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h
index f6c951c7a875..8a457b83d2a5 100644
--- a/arch/sh/include/asm/rwsem.h
+++ b/arch/sh/include/asm/rwsem.h
@@ -54,6 +54,19 @@ static inline void __down_write(struct rw_semaphore *sem)
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (tmp != RWSEM_ACTIVE_WRITE_BIAS)
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+
+	return 0;
+}
+
 static inline int __down_write_trylock(struct rw_semaphore *sem)
 {
 	int tmp;
-- 
2.7.0

[PATCH 08/11] sparc, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

which uses the same fast path as __down_write except it falls back to
rwsem_down_write_failed_killable slow path and return -EINTR if killed.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/sparc/include/asm/rwsem.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h
index e5a0d575bc7f..c1e9e32e8b63 100644
--- a/arch/sparc/include/asm/rwsem.h
+++ b/arch/sparc/include/asm/rwsem.h
@@ -55,6 +55,19 @@ static inline void __down_write(struct rw_semaphore *sem)
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	long tmp;
+
+	tmp = atomic64_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				  (atomic64_t *)(&sem->count));
+	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+
+	return 0;
+}
+
 static inline int __down_write_trylock(struct rw_semaphore *sem)
 {
 	long tmp;
-- 
2.7.0

[PATCH 08/11] sparc, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

which uses the same fast path as __down_write except it falls back to
rwsem_down_write_failed_killable slow path and return -EINTR if killed.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/sparc/include/asm/rwsem.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h
index e5a0d575bc7f..c1e9e32e8b63 100644
--- a/arch/sparc/include/asm/rwsem.h
+++ b/arch/sparc/include/asm/rwsem.h
@@ -55,6 +55,19 @@ static inline void __down_write(struct rw_semaphore *sem)
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	long tmp;
+
+	tmp = atomic64_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				  (atomic64_t *)(&sem->count));
+	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+
+	return 0;
+}
+
 static inline int __down_write_trylock(struct rw_semaphore *sem)
 {
 	long tmp;
-- 
2.7.0

[PATCH 09/11] xtensa, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

which uses the same fast path as __down_write except it falls back to
rwsem_down_write_failed_killable slow path and return -EINTR if killed.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/xtensa/include/asm/rwsem.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/xtensa/include/asm/rwsem.h b/arch/xtensa/include/asm/rwsem.h
index 593483f6e1ff..6283823b8040 100644
--- a/arch/xtensa/include/asm/rwsem.h
+++ b/arch/xtensa/include/asm/rwsem.h
@@ -59,6 +59,19 @@ static inline void __down_write(struct rw_semaphore *sem)
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (tmp != RWSEM_ACTIVE_WRITE_BIAS)
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+
+	return 0;
+}
+
 static inline int __down_write_trylock(struct rw_semaphore *sem)
 {
 	int tmp;
-- 
2.7.0

[PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

which uses the same fast path as __down_write except it falls back to
call_rwsem_down_write_failed_killable slow path and return -EINTR if
killed. To prevent from code duplication extract the skeleton of
__down_write into a helper macro which just takes the semaphore
and the slow path function to be called.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/x86/include/asm/rwsem.h | 41 ++++++++++++++++++++++++++++-------------
 arch/x86/lib/rwsem.S         |  8 ++++++++
 2 files changed, 36 insertions(+), 13 deletions(-)

diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
index 4a8292a0d6e1..d759c5f70f49 100644
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -99,21 +99,36 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * lock for writing
  */
+#define ____down_write(sem, slow_path)			\
+({							\
+	long tmp;					\
+	struct rw_semaphore* ret = sem;			\
+	asm volatile("# beginning down_write\n\t"	\
+		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"	\
+		     /* adds 0xffff0001, returns the old value */ \
+		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t" \
+		     /* was the active mask 0 before? */\
+		     "  jz        1f\n"			\
+		     "  call " slow_path "\n"		\
+		     "1:\n"				\
+		     "# ending down_write"		\
+		     : "+m" (sem->count), "=d" (tmp), "+a" (ret)	\
+		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS) \
+		     : "memory", "cc");			\
+	ret;						\
+})
+
 static inline void __down_write(struct rw_semaphore *sem)
 {
-	long tmp;
-	asm volatile("# beginning down_write\n\t"
-		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"
-		     /* adds 0xffff0001, returns the old value */
-		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t"
-		     /* was the active mask 0 before? */
-		     "  jz        1f\n"
-		     "  call call_rwsem_down_write_failed\n"
-		     "1:\n"
-		     "# ending down_write"
-		     : "+m" (sem->count), "=d" (tmp)
-		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS)
-		     : "memory", "cc");
+	____down_write(sem, "call_rwsem_down_write_failed");
+}
+
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	if (IS_ERR(____down_write(sem, "call_rwsem_down_write_failed_killable")))
+		return -EINTR;
+
+	return 0;
 }
 
 /*
diff --git a/arch/x86/lib/rwsem.S b/arch/x86/lib/rwsem.S
index be110efa0096..4534a7e912f3 100644
--- a/arch/x86/lib/rwsem.S
+++ b/arch/x86/lib/rwsem.S
@@ -106,6 +106,14 @@ ENTRY(call_rwsem_down_write_failed)
 	ret
 ENDPROC(call_rwsem_down_write_failed)
 
+ENTRY(call_rwsem_down_write_failed_killable)
+	save_common_regs
+	movq %rax,%rdi
+	call rwsem_down_write_failed_killable
+	restore_common_regs
+	ret
+ENDPROC(call_rwsem_down_write_failed_killable)
+
 ENTRY(call_rwsem_wake)
 	FRAME_BEGIN
 	/* do nothing if still outstanding active readers */
-- 
2.7.0

[PATCH 11/11] locking, rwsem: provide down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

Now that all the architectures implement the necessary glue code
we can introduce down_write_killable. The only difference wrt. regular
down_write is that the slow path waits in TASK_KILLABLE state and the
interruption by the fatal signal is reported as -EINTR to the caller.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 include/linux/lockdep.h | 15 +++++++++++++++
 include/linux/rwsem.h   |  1 +
 kernel/locking/rwsem.c  | 19 +++++++++++++++++++
 3 files changed, 35 insertions(+)

diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index d026b190c530..accfe56d8c51 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -444,6 +444,18 @@ do {								\
 	lock_acquired(&(_lock)->dep_map, _RET_IP_);			\
 } while (0)
 
+#define LOCK_CONTENDED_RETURN(_lock, try, lock)			\
+({								\
+	int ____err = 0;					\
+	if (!try(_lock)) {					\
+		lock_contended(&(_lock)->dep_map, _RET_IP_);	\
+		____err = lock(_lock);				\
+	}							\
+	if (!____err)						\
+		lock_acquired(&(_lock)->dep_map, _RET_IP_);	\
+	____err;						\
+})
+
 #else /* CONFIG_LOCK_STAT */
 
 #define lock_contended(lockdep_map, ip) do {} while (0)
@@ -452,6 +464,9 @@ do {								\
 #define LOCK_CONTENDED(_lock, try, lock) \
 	lock(_lock)
 
+#define LOCK_CONTENDED_RETURN(_lock, try, lock) \
+	lock(_lock)
+
 #endif /* CONFIG_LOCK_STAT */
 
 #ifdef CONFIG_LOCKDEP
diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h
index 7d7ae029dac5..d1c12d160ace 100644
--- a/include/linux/rwsem.h
+++ b/include/linux/rwsem.h
@@ -118,6 +118,7 @@ extern int down_read_trylock(struct rw_semaphore *sem);
  * lock for writing
  */
 extern void down_write(struct rw_semaphore *sem);
+extern int __must_check down_write_killable(struct rw_semaphore *sem);
 
 /*
  * trylock for writing -- returns 1 if successful, 0 if contention
diff --git a/kernel/locking/rwsem.c b/kernel/locking/rwsem.c
index 205be0ce34de..c817216c1615 100644
--- a/kernel/locking/rwsem.c
+++ b/kernel/locking/rwsem.c
@@ -55,6 +55,25 @@ void __sched down_write(struct rw_semaphore *sem)
 EXPORT_SYMBOL(down_write);
 
 /*
+ * lock for writing
+ */
+int __sched down_write_killable(struct rw_semaphore *sem)
+{
+	might_sleep();
+	rwsem_acquire(&sem->dep_map, 0, 0, _RET_IP_);
+
+	if (LOCK_CONTENDED_RETURN(sem, __down_write_trylock, __down_write_killable)) {
+		rwsem_release(&sem->dep_map, 1, _RET_IP_);
+		return -EINTR;
+	}
+
+	rwsem_set_owner(sem);
+	return 0;
+}
+
+EXPORT_SYMBOL(down_write_killable);
+
+/*
  * trylock for writing -- returns 1 if successful, 0 if contention
  */
 int down_write_trylock(struct rw_semaphore *sem)
-- 
2.7.0

Re: [PATCH 03/11] locking, rwsem: introduce basis for down_write_killable

[Peter Zijlstra]

On Mon, Feb 29, 2016 at 01:58:17PM +0100, Michal Hocko wrote:
> @@ -215,16 +216,34 @@ void __sched __down_write(struct rw_semaphore *sem)
>  		 */
>  		if (sem->count == 0)
>  			break;
> -		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
> +		set_task_state(tsk, state);
>  		raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
>  		schedule();
> +		if (signal_pending_state(state, current)) {
> +			ret = -EINTR;
> +			raw_spin_lock_irqsave(&sem->wait_lock, flags);
> +			goto out;
> +		}
>  		raw_spin_lock_irqsave(&sem->wait_lock, flags);
>  	}
>  	/* got the lock */
>  	sem->count = -1;

> @@ -487,20 +488,38 @@ struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
>  		/* Block until there are no active lockers. */
>  		do {
>  			schedule();
> -			set_current_state(TASK_UNINTERRUPTIBLE);
> +			if (signal_pending_state(state, current)) {
> +				raw_spin_lock_irq(&sem->wait_lock);
> +				ret = ERR_PTR(-EINTR);
> +				goto out;
> +			}
> +			set_current_state(state);
>  		} while ((count = sem->count) & RWSEM_ACTIVE_MASK);
>  
>  		raw_spin_lock_irq(&sem->wait_lock);
>  	}
>  	__set_current_state(TASK_RUNNING);

Why is the signal_pending_state() test _after_ the call to schedule()
and before the 'trylock'.

__mutex_lock_common() has it before the call to schedule and after the
'trylock'.

The difference is that rwsem will now respond to the KILL and return
-EINTR even if the lock is available, whereas mutex will acquire it and
ignore the signal (for a little while longer).

Neither is wrong per se, but I feel all the locking primitives should
behave in a consistent manner in this regard.

Re: [PATCH 03/11] locking, rwsem: introduce basis for down_write_killable

[Peter Zijlstra]

On Mon, Feb 29, 2016 at 01:58:17PM +0100, Michal Hocko wrote:
> @@ -215,16 +216,34 @@ void __sched __down_write(struct rw_semaphore *sem)
>  		 */
>  		if (sem->count == 0)
>  			break;
> -		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
> +		set_task_state(tsk, state);
>  		raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
>  		schedule();
> +		if (signal_pending_state(state, current)) {
> +			ret = -EINTR;
> +			raw_spin_lock_irqsave(&sem->wait_lock, flags);
> +			goto out;
> +		}
>  		raw_spin_lock_irqsave(&sem->wait_lock, flags);
>  	}
>  	/* got the lock */
>  	sem->count = -1;

> @@ -487,20 +488,38 @@ struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
>  		/* Block until there are no active lockers. */
>  		do {
>  			schedule();
> -			set_current_state(TASK_UNINTERRUPTIBLE);
> +			if (signal_pending_state(state, current)) {
> +				raw_spin_lock_irq(&sem->wait_lock);
> +				ret = ERR_PTR(-EINTR);
> +				goto out;
> +			}
> +			set_current_state(state);
>  		} while ((count = sem->count) & RWSEM_ACTIVE_MASK);
>  
>  		raw_spin_lock_irq(&sem->wait_lock);
>  	}
>  	__set_current_state(TASK_RUNNING);

Why is the signal_pending_state() test _after_ the call to schedule()
and before the 'trylock'.

__mutex_lock_common() has it before the call to schedule and after the
'trylock'.

The difference is that rwsem will now respond to the KILL and return
-EINTR even if the lock is available, whereas mutex will acquire it and
ignore the signal (for a little while longer).

Neither is wrong per se, but I feel all the locking primitives should
behave in a consistent manner in this regard.

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Peter Zijlstra]

On Mon, Feb 29, 2016 at 01:58:14PM +0100, Michal Hocko wrote:
> I have tested on x86 with OOM situations with high mmap_sem contention
> (basically many parallel page faults racing with many parallel mmap/munmap
> tight loops) so the waiters for the write locks are routinely interrupted
> by SIGKILL.

Aside from the one niggle (as per the other email) they look good to me
and I would take them through the tip/locking tree.

Thanks!

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Peter Zijlstra]

On Mon, Feb 29, 2016 at 01:58:14PM +0100, Michal Hocko wrote:
> I have tested on x86 with OOM situations with high mmap_sem contention
> (basically many parallel page faults racing with many parallel mmap/munmap
> tight loops) so the waiters for the write locks are routinely interrupted
> by SIGKILL.

Aside from the one niggle (as per the other email) they look good to me
and I would take them through the tip/locking tree.

Thanks!

Re: [PATCH 03/11] locking, rwsem: introduce basis for down_write_killable

[Michal Hocko]

On Wed 30-03-16 15:25:49, Peter Zijlstra wrote:
[...]
> Why is the signal_pending_state() test _after_ the call to schedule()
> and before the 'trylock'.

No special reason. I guess I was just too focused on the wake_by_signal
path and didn't realize the trylock as well.

> __mutex_lock_common() has it before the call to schedule and after the
> 'trylock'.
> 
> The difference is that rwsem will now respond to the KILL and return
> -EINTR even if the lock is available, whereas mutex will acquire it and
> ignore the signal (for a little while longer).
> 
> Neither is wrong per se, but I feel all the locking primitives should
> behave in a consistent manner in this regard.

Agreed! What about the following on top? I will repost the full patch
if it looks OK.

Thanks!
---
diff --git a/kernel/locking/rwsem-spinlock.c b/kernel/locking/rwsem-spinlock.c
index d1d04ca10d0e..fb2db7b408f0 100644
--- a/kernel/locking/rwsem-spinlock.c
+++ b/kernel/locking/rwsem-spinlock.c
@@ -216,14 +216,13 @@ int __sched __down_write_state(struct rw_semaphore *sem, int state)
 		 */
 		if (sem->count == 0)
 			break;
-		set_task_state(tsk, state);
-		raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
-		schedule();
 		if (signal_pending_state(state, current)) {
 			ret = -EINTR;
-			raw_spin_lock_irqsave(&sem->wait_lock, flags);
 			goto out;
 		}
+		set_task_state(tsk, state);
+		raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
+		schedule();
 		raw_spin_lock_irqsave(&sem->wait_lock, flags);
 	}
 	/* got the lock */
diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c
index 5cec34f1ad6f..781b2628e41b 100644
--- a/kernel/locking/rwsem-xadd.c
+++ b/kernel/locking/rwsem-xadd.c
@@ -487,19 +487,19 @@ __rwsem_down_write_failed_state(struct rw_semaphore *sem, int state)
 
 		/* Block until there are no active lockers. */
 		do {
-			schedule();
 			if (signal_pending_state(state, current)) {
 				raw_spin_lock_irq(&sem->wait_lock);
 				ret = ERR_PTR(-EINTR);
 				goto out;
 			}
+			schedule();
 			set_current_state(state);
 		} while ((count = sem->count) & RWSEM_ACTIVE_MASK);
 
 		raw_spin_lock_irq(&sem->wait_lock);
 	}
-	__set_current_state(TASK_RUNNING);
 out:
+	__set_current_state(TASK_RUNNING);
 	list_del(&waiter.list);
 	raw_spin_unlock_irq(&sem->wait_lock);
 

-- 
Michal Hocko
SUSE Labs

Re: [PATCH 03/11] locking, rwsem: introduce basis for down_write_killable

[Peter Zijlstra]

On Thu, Mar 31, 2016 at 10:33:36AM +0200, Michal Hocko wrote:
> > __mutex_lock_common() has it before the call to schedule and after the
> > 'trylock'.
> > 
> > The difference is that rwsem will now respond to the KILL and return
> > -EINTR even if the lock is available, whereas mutex will acquire it and
> > ignore the signal (for a little while longer).
> > 
> > Neither is wrong per se, but I feel all the locking primitives should
> > behave in a consistent manner in this regard.
> 
> Agreed! What about the following on top? I will repost the full patch
> if it looks OK.

Yep, that seems to have the right shape to it.

Thanks!

Re: [PATCH 03/11] locking, rwsem: introduce basis for down_write_killable

[Peter Zijlstra]

On Thu, Mar 31, 2016 at 10:33:36AM +0200, Michal Hocko wrote:
> > __mutex_lock_common() has it before the call to schedule and after the
> > 'trylock'.
> > 
> > The difference is that rwsem will now respond to the KILL and return
> > -EINTR even if the lock is available, whereas mutex will acquire it and
> > ignore the signal (for a little while longer).
> > 
> > Neither is wrong per se, but I feel all the locking primitives should
> > behave in a consistent manner in this regard.
> 
> Agreed! What about the following on top? I will repost the full patch
> if it looks OK.

Yep, that seems to have the right shape to it.

Thanks!

[PATCH] locking, rwsem: introduce basis for down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

Introduce a generic implementation necessary for down_write_killable.
This is a trivial extension of the already existing down_write call
which can be interrupted by SIGKILL.  This patch doesn't provide
down_write_killable yet because arches have to provide the necessary
pieces before.

rwsem_down_write_failed which is a generic slow path for the
write lock is extended to allow a task state and renamed to
__rwsem_down_write_failed_state. The return value is either a valid
semaphore pointer or ERR_PTR(-EINTR).

rwsem_down_write_failed_killable is exported as a new way to wait for
the lock and be killable.

For rwsem-spinlock implementation the current __down_write it updated
in a similar way as __rwsem_down_write_failed_state except it doesn't
need new exports just visible __down_write_killable.

Architectures which are not using the generic rwsem implementation are
supposed to provide their __down_write_killable implementation and
use rwsem_down_write_failed_killable for the slow path.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 include/asm-generic/rwsem.h     | 12 ++++++++++++
 include/linux/rwsem-spinlock.h  |  1 +
 include/linux/rwsem.h           |  2 ++
 kernel/locking/rwsem-spinlock.c | 22 ++++++++++++++++++++--
 kernel/locking/rwsem-xadd.c     | 31 +++++++++++++++++++++++++------
 5 files changed, 60 insertions(+), 8 deletions(-)

diff --git a/include/asm-generic/rwsem.h b/include/asm-generic/rwsem.h
index b8d8a6cf4ca8..3fc94a046bf5 100644
--- a/include/asm-generic/rwsem.h
+++ b/include/asm-generic/rwsem.h
@@ -63,6 +63,18 @@ static inline void __down_write(struct rw_semaphore *sem)
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	long tmp;
+
+	tmp = atomic_long_add_return_acquire(RWSEM_ACTIVE_WRITE_BIAS,
+				     (atomic_long_t *)&sem->count);
+	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+	return 0;
+}
+
 static inline int __down_write_trylock(struct rw_semaphore *sem)
 {
 	long tmp;
diff --git a/include/linux/rwsem-spinlock.h b/include/linux/rwsem-spinlock.h
index a733a5467e6c..ae0528b834cd 100644
--- a/include/linux/rwsem-spinlock.h
+++ b/include/linux/rwsem-spinlock.h
@@ -34,6 +34,7 @@ struct rw_semaphore {
 extern void __down_read(struct rw_semaphore *sem);
 extern int __down_read_trylock(struct rw_semaphore *sem);
 extern void __down_write(struct rw_semaphore *sem);
+extern int __must_check __down_write_killable(struct rw_semaphore *sem);
 extern int __down_write_trylock(struct rw_semaphore *sem);
 extern void __up_read(struct rw_semaphore *sem);
 extern void __up_write(struct rw_semaphore *sem);
diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h
index 8f498cdde280..7d7ae029dac5 100644
--- a/include/linux/rwsem.h
+++ b/include/linux/rwsem.h
@@ -14,6 +14,7 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/atomic.h>
+#include <linux/err.h>
 #ifdef CONFIG_RWSEM_SPIN_ON_OWNER
 #include <linux/osq_lock.h>
 #endif
@@ -43,6 +44,7 @@ struct rw_semaphore {
 
 extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
 extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed_killable(struct rw_semaphore *sem);
 extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
 extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
 
diff --git a/kernel/locking/rwsem-spinlock.c b/kernel/locking/rwsem-spinlock.c
index bab26104a5d0..fb2db7b408f0 100644
--- a/kernel/locking/rwsem-spinlock.c
+++ b/kernel/locking/rwsem-spinlock.c
@@ -191,11 +191,12 @@ int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * get a write lock on the semaphore
  */
-void __sched __down_write(struct rw_semaphore *sem)
+int __sched __down_write_state(struct rw_semaphore *sem, int state)
 {
 	struct rwsem_waiter waiter;
 	struct task_struct *tsk;
 	unsigned long flags;
+	int ret = 0;
 
 	raw_spin_lock_irqsave(&sem->wait_lock, flags);
 
@@ -215,16 +216,33 @@ void __sched __down_write(struct rw_semaphore *sem)
 		 */
 		if (sem->count == 0)
 			break;
-		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+		if (signal_pending_state(state, current)) {
+			ret = -EINTR;
+			goto out;
+		}
+		set_task_state(tsk, state);
 		raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
 		schedule();
 		raw_spin_lock_irqsave(&sem->wait_lock, flags);
 	}
 	/* got the lock */
 	sem->count = -1;
+out:
 	list_del(&waiter.list);
 
 	raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+	return ret;
+}
+
+void __sched __down_write(struct rw_semaphore *sem)
+{
+	__down_write_state(sem, TASK_UNINTERRUPTIBLE);
+}
+
+int __sched __down_write_killable(struct rw_semaphore *sem)
+{
+	return __down_write_state(sem, TASK_KILLABLE);
 }
 
 /*
diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c
index a4d4de05b2d1..781b2628e41b 100644
--- a/kernel/locking/rwsem-xadd.c
+++ b/kernel/locking/rwsem-xadd.c
@@ -433,12 +433,13 @@ static inline bool rwsem_has_spinner(struct rw_semaphore *sem)
 /*
  * Wait until we successfully acquire the write lock
  */
-__visible
-struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
+static inline struct rw_semaphore *
+__rwsem_down_write_failed_state(struct rw_semaphore *sem, int state)
 {
 	long count;
 	bool waiting = true; /* any queued threads before us */
 	struct rwsem_waiter waiter;
+	struct rw_semaphore *ret = sem;
 
 	/* undo write bias from down_write operation, stop active locking */
 	count = rwsem_atomic_update(-RWSEM_ACTIVE_WRITE_BIAS, sem);
@@ -478,7 +479,7 @@ struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
 		count = rwsem_atomic_update(RWSEM_WAITING_BIAS, sem);
 
 	/* wait until we successfully acquire the lock */
-	set_current_state(TASK_UNINTERRUPTIBLE);
+	set_current_state(state);
 	while (true) {
 		if (rwsem_try_write_lock(count, sem))
 			break;
@@ -486,21 +487,39 @@ struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
 
 		/* Block until there are no active lockers. */
 		do {
+			if (signal_pending_state(state, current)) {
+				raw_spin_lock_irq(&sem->wait_lock);
+				ret = ERR_PTR(-EINTR);
+				goto out;
+			}
 			schedule();
-			set_current_state(TASK_UNINTERRUPTIBLE);
+			set_current_state(state);
 		} while ((count = sem->count) & RWSEM_ACTIVE_MASK);
 
 		raw_spin_lock_irq(&sem->wait_lock);
 	}
+out:
 	__set_current_state(TASK_RUNNING);
-
 	list_del(&waiter.list);
 	raw_spin_unlock_irq(&sem->wait_lock);
 
-	return sem;
+	return ret;
+}
+
+__visible struct rw_semaphore * __sched
+rwsem_down_write_failed(struct rw_semaphore *sem)
+{
+	return __rwsem_down_write_failed_state(sem, TASK_UNINTERRUPTIBLE);
 }
 EXPORT_SYMBOL(rwsem_down_write_failed);
 
+__visible struct rw_semaphore * __sched
+rwsem_down_write_failed_killable(struct rw_semaphore *sem)
+{
+	return __rwsem_down_write_failed_state(sem, TASK_KILLABLE);
+}
+EXPORT_SYMBOL(rwsem_down_write_failed_killable);
+
 /*
  * handle waking up a waiter on the semaphore
  * - up_read/up_write has decremented the active part of count if we come here
-- 
2.8.0.rc3

[PATCH] locking, rwsem: introduce basis for down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

Introduce a generic implementation necessary for down_write_killable.
This is a trivial extension of the already existing down_write call
which can be interrupted by SIGKILL.  This patch doesn't provide
down_write_killable yet because arches have to provide the necessary
pieces before.

rwsem_down_write_failed which is a generic slow path for the
write lock is extended to allow a task state and renamed to
__rwsem_down_write_failed_state. The return value is either a valid
semaphore pointer or ERR_PTR(-EINTR).

rwsem_down_write_failed_killable is exported as a new way to wait for
the lock and be killable.

For rwsem-spinlock implementation the current __down_write it updated
in a similar way as __rwsem_down_write_failed_state except it doesn't
need new exports just visible __down_write_killable.

Architectures which are not using the generic rwsem implementation are
supposed to provide their __down_write_killable implementation and
use rwsem_down_write_failed_killable for the slow path.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 include/asm-generic/rwsem.h     | 12 ++++++++++++
 include/linux/rwsem-spinlock.h  |  1 +
 include/linux/rwsem.h           |  2 ++
 kernel/locking/rwsem-spinlock.c | 22 ++++++++++++++++++++--
 kernel/locking/rwsem-xadd.c     | 31 +++++++++++++++++++++++++------
 5 files changed, 60 insertions(+), 8 deletions(-)

diff --git a/include/asm-generic/rwsem.h b/include/asm-generic/rwsem.h
index b8d8a6cf4ca8..3fc94a046bf5 100644
--- a/include/asm-generic/rwsem.h
+++ b/include/asm-generic/rwsem.h
@@ -63,6 +63,18 @@ static inline void __down_write(struct rw_semaphore *sem)
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	long tmp;
+
+	tmp = atomic_long_add_return_acquire(RWSEM_ACTIVE_WRITE_BIAS,
+				     (atomic_long_t *)&sem->count);
+	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+		if (IS_ERR(rwsem_down_write_failed_killable(sem)))
+			return -EINTR;
+	return 0;
+}
+
 static inline int __down_write_trylock(struct rw_semaphore *sem)
 {
 	long tmp;
diff --git a/include/linux/rwsem-spinlock.h b/include/linux/rwsem-spinlock.h
index a733a5467e6c..ae0528b834cd 100644
--- a/include/linux/rwsem-spinlock.h
+++ b/include/linux/rwsem-spinlock.h
@@ -34,6 +34,7 @@ struct rw_semaphore {
 extern void __down_read(struct rw_semaphore *sem);
 extern int __down_read_trylock(struct rw_semaphore *sem);
 extern void __down_write(struct rw_semaphore *sem);
+extern int __must_check __down_write_killable(struct rw_semaphore *sem);
 extern int __down_write_trylock(struct rw_semaphore *sem);
 extern void __up_read(struct rw_semaphore *sem);
 extern void __up_write(struct rw_semaphore *sem);
diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h
index 8f498cdde280..7d7ae029dac5 100644
--- a/include/linux/rwsem.h
+++ b/include/linux/rwsem.h
@@ -14,6 +14,7 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/atomic.h>
+#include <linux/err.h>
 #ifdef CONFIG_RWSEM_SPIN_ON_OWNER
 #include <linux/osq_lock.h>
 #endif
@@ -43,6 +44,7 @@ struct rw_semaphore {
 
 extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
 extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed_killable(struct rw_semaphore *sem);
 extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
 extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
 
diff --git a/kernel/locking/rwsem-spinlock.c b/kernel/locking/rwsem-spinlock.c
index bab26104a5d0..fb2db7b408f0 100644
--- a/kernel/locking/rwsem-spinlock.c
+++ b/kernel/locking/rwsem-spinlock.c
@@ -191,11 +191,12 @@ int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * get a write lock on the semaphore
  */
-void __sched __down_write(struct rw_semaphore *sem)
+int __sched __down_write_state(struct rw_semaphore *sem, int state)
 {
 	struct rwsem_waiter waiter;
 	struct task_struct *tsk;
 	unsigned long flags;
+	int ret = 0;
 
 	raw_spin_lock_irqsave(&sem->wait_lock, flags);
 
@@ -215,16 +216,33 @@ void __sched __down_write(struct rw_semaphore *sem)
 		 */
 		if (sem->count == 0)
 			break;
-		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+		if (signal_pending_state(state, current)) {
+			ret = -EINTR;
+			goto out;
+		}
+		set_task_state(tsk, state);
 		raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
 		schedule();
 		raw_spin_lock_irqsave(&sem->wait_lock, flags);
 	}
 	/* got the lock */
 	sem->count = -1;
+out:
 	list_del(&waiter.list);
 
 	raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+	return ret;
+}
+
+void __sched __down_write(struct rw_semaphore *sem)
+{
+	__down_write_state(sem, TASK_UNINTERRUPTIBLE);
+}
+
+int __sched __down_write_killable(struct rw_semaphore *sem)
+{
+	return __down_write_state(sem, TASK_KILLABLE);
 }
 
 /*
diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c
index a4d4de05b2d1..781b2628e41b 100644
--- a/kernel/locking/rwsem-xadd.c
+++ b/kernel/locking/rwsem-xadd.c
@@ -433,12 +433,13 @@ static inline bool rwsem_has_spinner(struct rw_semaphore *sem)
 /*
  * Wait until we successfully acquire the write lock
  */
-__visible
-struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
+static inline struct rw_semaphore *
+__rwsem_down_write_failed_state(struct rw_semaphore *sem, int state)
 {
 	long count;
 	bool waiting = true; /* any queued threads before us */
 	struct rwsem_waiter waiter;
+	struct rw_semaphore *ret = sem;
 
 	/* undo write bias from down_write operation, stop active locking */
 	count = rwsem_atomic_update(-RWSEM_ACTIVE_WRITE_BIAS, sem);
@@ -478,7 +479,7 @@ struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
 		count = rwsem_atomic_update(RWSEM_WAITING_BIAS, sem);
 
 	/* wait until we successfully acquire the lock */
-	set_current_state(TASK_UNINTERRUPTIBLE);
+	set_current_state(state);
 	while (true) {
 		if (rwsem_try_write_lock(count, sem))
 			break;
@@ -486,21 +487,39 @@ struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
 
 		/* Block until there are no active lockers. */
 		do {
+			if (signal_pending_state(state, current)) {
+				raw_spin_lock_irq(&sem->wait_lock);
+				ret = ERR_PTR(-EINTR);
+				goto out;
+			}
 			schedule();
-			set_current_state(TASK_UNINTERRUPTIBLE);
+			set_current_state(state);
 		} while ((count = sem->count) & RWSEM_ACTIVE_MASK);
 
 		raw_spin_lock_irq(&sem->wait_lock);
 	}
+out:
 	__set_current_state(TASK_RUNNING);
-
 	list_del(&waiter.list);
 	raw_spin_unlock_irq(&sem->wait_lock);
 
-	return sem;
+	return ret;
+}
+
+__visible struct rw_semaphore * __sched
+rwsem_down_write_failed(struct rw_semaphore *sem)
+{
+	return __rwsem_down_write_failed_state(sem, TASK_UNINTERRUPTIBLE);
 }
 EXPORT_SYMBOL(rwsem_down_write_failed);
 
+__visible struct rw_semaphore * __sched
+rwsem_down_write_failed_killable(struct rw_semaphore *sem)
+{
+	return __rwsem_down_write_failed_state(sem, TASK_KILLABLE);
+}
+EXPORT_SYMBOL(rwsem_down_write_failed_killable);
+
 /*
  * handle waking up a waiter on the semaphore
  * - up_read/up_write has decremented the active part of count if we come here
-- 
2.8.0.rc3

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Michal Hocko]

On Wed 30-03-16 15:32:17, Peter Zijlstra wrote:
> On Mon, Feb 29, 2016 at 01:58:14PM +0100, Michal Hocko wrote:
> > I have tested on x86 with OOM situations with high mmap_sem contention
> > (basically many parallel page faults racing with many parallel mmap/munmap
> > tight loops) so the waiters for the write locks are routinely interrupted
> > by SIGKILL.
> 
> Aside from the one niggle (as per the other email) they look good to me
> and I would take them through the tip/locking tree.

Thanks for the review! I understand that tip/locking would be the most
appropriate place but I am wondering whether this causes some issues
with the follow up patches which use this new API and which I expect to
go via Andrew's tree.

That being said I do not care much but then we have a potential
dependency between mmotm and tip/locking.

-- 
Michal Hocko
SUSE Labs

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Michal Hocko]

On Wed 30-03-16 15:32:17, Peter Zijlstra wrote:
> On Mon, Feb 29, 2016 at 01:58:14PM +0100, Michal Hocko wrote:
> > I have tested on x86 with OOM situations with high mmap_sem contention
> > (basically many parallel page faults racing with many parallel mmap/munmap
> > tight loops) so the waiters for the write locks are routinely interrupted
> > by SIGKILL.
> 
> Aside from the one niggle (as per the other email) they look good to me
> and I would take them through the tip/locking tree.

Thanks for the review! I understand that tip/locking would be the most
appropriate place but I am wondering whether this causes some issues
with the follow up patches which use this new API and which I expect to
go via Andrew's tree.

That being said I do not care much but then we have a potential
dependency between mmotm and tip/locking.

-- 
Michal Hocko
SUSE Labs

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Ingo Molnar]

* Michal Hocko <mhocko@kernel.org> wrote:

> On Wed 30-03-16 15:32:17, Peter Zijlstra wrote:
> > On Mon, Feb 29, 2016 at 01:58:14PM +0100, Michal Hocko wrote:
> > > I have tested on x86 with OOM situations with high mmap_sem contention
> > > (basically many parallel page faults racing with many parallel mmap/munmap
> > > tight loops) so the waiters for the write locks are routinely interrupted
> > > by SIGKILL.
> > 
> > Aside from the one niggle (as per the other email) they look good to me
> > and I would take them through the tip/locking tree.
> 
> Thanks for the review! I understand that tip/locking would be the most 
> appropriate place [...]

Yes.

> [...] but I am wondering whether this causes some issues with the follow up 
> patches which use this new API and which I expect to go via Andrew's tree.

So AFAIK Andrew's tree is based on top of linux-next, so once it goes into 
tip:locking/core, -mm can pick it up as well 1-2 days later.

Please send the changes in isolation, for merge into the locking tree.

Thanks,

	Ingo

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Ingo Molnar]

* Michal Hocko <mhocko@kernel.org> wrote:

> On Wed 30-03-16 15:32:17, Peter Zijlstra wrote:
> > On Mon, Feb 29, 2016 at 01:58:14PM +0100, Michal Hocko wrote:
> > > I have tested on x86 with OOM situations with high mmap_sem contention
> > > (basically many parallel page faults racing with many parallel mmap/munmap
> > > tight loops) so the waiters for the write locks are routinely interrupted
> > > by SIGKILL.
> > 
> > Aside from the one niggle (as per the other email) they look good to me
> > and I would take them through the tip/locking tree.
> 
> Thanks for the review! I understand that tip/locking would be the most 
> appropriate place [...]

Yes.

> [...] but I am wondering whether this causes some issues with the follow up 
> patches which use this new API and which I expect to go via Andrew's tree.

So AFAIK Andrew's tree is based on top of linux-next, so once it goes into 
tip:locking/core, -mm can pick it up as well 1-2 days later.

Please send the changes in isolation, for merge into the locking tree.

Thanks,

	Ingo

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Michal Hocko]

On Thu 31-03-16 11:20:05, Ingo Molnar wrote:
> 
> * Michal Hocko <mhocko@kernel.org> wrote:
> 
> > On Wed 30-03-16 15:32:17, Peter Zijlstra wrote:
> > > On Mon, Feb 29, 2016 at 01:58:14PM +0100, Michal Hocko wrote:
> > > > I have tested on x86 with OOM situations with high mmap_sem contention
> > > > (basically many parallel page faults racing with many parallel mmap/munmap
> > > > tight loops) so the waiters for the write locks are routinely interrupted
> > > > by SIGKILL.
> > > 
> > > Aside from the one niggle (as per the other email) they look good to me
> > > and I would take them through the tip/locking tree.
> > 
> > Thanks for the review! I understand that tip/locking would be the most 
> > appropriate place [...]
> 
> Yes.
> 
> > [...] but I am wondering whether this causes some issues with the follow up 
> > patches which use this new API and which I expect to go via Andrew's tree.
> 
> So AFAIK Andrew's tree is based on top of linux-next, so once it goes into 
> tip:locking/core, -mm can pick it up as well 1-2 days later.

OK. Andrew, just make sure you send the follow up changes to Linus after
tip/locking is merged.

> Please send the changes in isolation, for merge into the locking tree.

Yes, that's what I plan to do in few days.

Thanks!
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Michal Hocko]

On Thu 31-03-16 11:20:05, Ingo Molnar wrote:
> 
> * Michal Hocko <mhocko@kernel.org> wrote:
> 
> > On Wed 30-03-16 15:32:17, Peter Zijlstra wrote:
> > > On Mon, Feb 29, 2016 at 01:58:14PM +0100, Michal Hocko wrote:
> > > > I have tested on x86 with OOM situations with high mmap_sem contention
> > > > (basically many parallel page faults racing with many parallel mmap/munmap
> > > > tight loops) so the waiters for the write locks are routinely interrupted
> > > > by SIGKILL.
> > > 
> > > Aside from the one niggle (as per the other email) they look good to me
> > > and I would take them through the tip/locking tree.
> > 
> > Thanks for the review! I understand that tip/locking would be the most 
> > appropriate place [...]
> 
> Yes.
> 
> > [...] but I am wondering whether this causes some issues with the follow up 
> > patches which use this new API and which I expect to go via Andrew's tree.
> 
> So AFAIK Andrew's tree is based on top of linux-next, so once it goes into 
> tip:locking/core, -mm can pick it up as well 1-2 days later.

OK. Andrew, just make sure you send the follow up changes to Linus after
tip/locking is merged.

> Please send the changes in isolation, for merge into the locking tree.

Yes, that's what I plan to do in few days.

Thanks!
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Andrew Morton]

On Thu, 31 Mar 2016 11:20:05 +0200 Ingo Molnar <mingo@kernel.org> wrote:

> So AFAIK Andrew's tree is based on top of linux-next

Not really true any more - I only base -mm patches on linux-next
patches when they must be based that way due to some known dependency.

I can certainly handle MM patches which are based on linux-next.  Such
an arrangement is going to make life awkward for Michal's
auto-maintained git tree of the -mm MM patches
(git://git.kernel.org/pub/scm/linux/kernel/git/mhocko/mm.git).

Maybe I could merge down_write_killable into -mm's main MM section then
knock it out of my copy of linux-next, so everything is seamless for
mm.git.  I've done that before.

But it's all a bit of a pain - it would be simpler to keep
down_write_killable in the same tree as the patches which depend on it.


Michal, how about this?

mm.git currently takes the patches between

#NEXT_PATCHES_START mm
...
#NEXT_PATCHES_END


Can you change it to also take the patches between

#NEXT_PATCHES_START mm-post-next
...
#NEXT_PATCHES_END

?

That way I can do


#NEXT_PATCHES_START mm
...
#NEXT_PATCHES_END
...
linux-next.patch
revert-down_write_killable.patch
...
#NEXT_PATCHES_START mm-post-next
down_write_killlable.patch
...
#NEXT_PATCHES_END

then everything you have should apply and run OK.

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Ingo Molnar]

* Andrew Morton <akpm@linux-foundation.org> wrote:

> On Thu, 31 Mar 2016 11:20:05 +0200 Ingo Molnar <mingo@kernel.org> wrote:
> 
> > So AFAIK Andrew's tree is based on top of linux-next
> 
> Not really true any more - I only base -mm patches on linux-next
> patches when they must be based that way due to some known dependency.
> 
> I can certainly handle MM patches which are based on linux-next.  Such
> an arrangement is going to make life awkward for Michal's
> auto-maintained git tree of the -mm MM patches
> (git://git.kernel.org/pub/scm/linux/kernel/git/mhocko/mm.git).
> 
> Maybe I could merge down_write_killable into -mm's main MM section then
> knock it out of my copy of linux-next, so everything is seamless for
> mm.git.  I've done that before.
> 
> But it's all a bit of a pain - it would be simpler to keep
> down_write_killable in the same tree as the patches which depend on it.

I can help on the Git level: I can do tip:locking/rwsem tree with only these 
changes, with stable sha1's, on which the remaining work can be based. The
locking tree typically goes in early during the merge window, so there's no
real dependencies.

On the source code level this series is changing the existing locking code too,
it doesn't just add a new orthogonal method or so, so I'd really like to have
it in the locking tree.

Thanks,

	Ingo

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Ingo Molnar]

* Andrew Morton <akpm@linux-foundation.org> wrote:

> On Thu, 31 Mar 2016 11:20:05 +0200 Ingo Molnar <mingo@kernel.org> wrote:
> 
> > So AFAIK Andrew's tree is based on top of linux-next
> 
> Not really true any more - I only base -mm patches on linux-next
> patches when they must be based that way due to some known dependency.
> 
> I can certainly handle MM patches which are based on linux-next.  Such
> an arrangement is going to make life awkward for Michal's
> auto-maintained git tree of the -mm MM patches
> (git://git.kernel.org/pub/scm/linux/kernel/git/mhocko/mm.git).
> 
> Maybe I could merge down_write_killable into -mm's main MM section then
> knock it out of my copy of linux-next, so everything is seamless for
> mm.git.  I've done that before.
> 
> But it's all a bit of a pain - it would be simpler to keep
> down_write_killable in the same tree as the patches which depend on it.

I can help on the Git level: I can do tip:locking/rwsem tree with only these 
changes, with stable sha1's, on which the remaining work can be based. The
locking tree typically goes in early during the merge window, so there's no
real dependencies.

On the source code level this series is changing the existing locking code too,
it doesn't just add a new orthogonal method or so, so I'd really like to have
it in the locking tree.

Thanks,

	Ingo

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Michal Hocko]

On Thu 31-03-16 10:03:31, Andrew Morton wrote:
> On Thu, 31 Mar 2016 11:20:05 +0200 Ingo Molnar <mingo@kernel.org> wrote:
> 
> > So AFAIK Andrew's tree is based on top of linux-next
> 
> Not really true any more - I only base -mm patches on linux-next
> patches when they must be based that way due to some known dependency.
> 
> I can certainly handle MM patches which are based on linux-next.  Such
> an arrangement is going to make life awkward for Michal's
> auto-maintained git tree of the -mm MM patches
> (git://git.kernel.org/pub/scm/linux/kernel/git/mhocko/mm.git).

Don't worry about my mmotm git tree. I will either cherry-pick these
patches from the tip or if Ingo can base them on 4.5 then I can pull
from his branch.

I was more worried about dependencies when you send your patch bomb to
Linus because then it is an additional burden on you to watch for tip
merge before you send yours.

Thanks!
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Michal Hocko]

On Thu 31-03-16 10:03:31, Andrew Morton wrote:
> On Thu, 31 Mar 2016 11:20:05 +0200 Ingo Molnar <mingo@kernel.org> wrote:
> 
> > So AFAIK Andrew's tree is based on top of linux-next
> 
> Not really true any more - I only base -mm patches on linux-next
> patches when they must be based that way due to some known dependency.
> 
> I can certainly handle MM patches which are based on linux-next.  Such
> an arrangement is going to make life awkward for Michal's
> auto-maintained git tree of the -mm MM patches
> (git://git.kernel.org/pub/scm/linux/kernel/git/mhocko/mm.git).

Don't worry about my mmotm git tree. I will either cherry-pick these
patches from the tip or if Ingo can base them on 4.5 then I can pull
from his branch.

I was more worried about dependencies when you send your patch bomb to
Linus because then it is an additional burden on you to watch for tip
merge before you send yours.

Thanks!
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Andrew Morton]

On Fri, 1 Apr 2016 09:26:54 +0200 Michal Hocko <mhocko@kernel.org> wrote:

> I was more worried about dependencies when you send your patch bomb to
> Linus because then it is an additional burden on you to watch for tip
> merge before you send yours.

That happens pretty often.  I haven't screwed it up yet ;)

Usually stuff just won't compile, but I always have little notes-to-self
in the series file reminding me to check stuff.

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Andrew Morton]

On Fri, 1 Apr 2016 09:26:54 +0200 Michal Hocko <mhocko@kernel.org> wrote:

> I was more worried about dependencies when you send your patch bomb to
> Linus because then it is an additional burden on you to watch for tip
> merge before you send yours.

That happens pretty often.  I haven't screwed it up yet ;)

Usually stuff just won't compile, but I always have little notes-to-self
in the series file reminding me to check stuff.

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Michal Hocko]

On Fri 01-04-16 08:33:48, Ingo Molnar wrote:
[...]
> I can help on the Git level: I can do tip:locking/rwsem tree with only these 
> changes, with stable sha1's, on which the remaining work can be based. The
> locking tree typically goes in early during the merge window, so there's no
> real dependencies.

OK, I will wait for this series to apear in tip:locking/rwsem and then
post the follow up patches to Andrew. If you can base this branch on 4.5
that would be ideal for mmotm git tree workflow but I can work that
around should there be a complication.

Thanks!
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Michal Hocko]

On Fri 01-04-16 08:33:48, Ingo Molnar wrote:
[...]
> I can help on the Git level: I can do tip:locking/rwsem tree with only these 
> changes, with stable sha1's, on which the remaining work can be based. The
> locking tree typically goes in early during the merge window, so there's no
> real dependencies.

OK, I will wait for this series to apear in tip:locking/rwsem and then
post the follow up patches to Andrew. If you can base this branch on 4.5
that would be ideal for mmotm git tree workflow but I can work that
around should there be a complication.

Thanks!
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Ingo Molnar]

* Michal Hocko <mhocko@kernel.org> wrote:

> On Fri 01-04-16 08:33:48, Ingo Molnar wrote:
> [...]
> > I can help on the Git level: I can do tip:locking/rwsem tree with only these 
> > changes, with stable sha1's, on which the remaining work can be based. The
> > locking tree typically goes in early during the merge window, so there's no
> > real dependencies.
> 
> OK, I will wait for this series to apear in tip:locking/rwsem and then post the 
> follow up patches to Andrew. [...]

Well, 'this series' was posted a month ago, and patch #3 had a discussion and some 
corrections to it - so please re-send with a v4.6-rc1 base. (v4.5 is fine too if 
you double check that v4.6-rc1 merges cleanly with it.)

Thanks,

	Ingo

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Ingo Molnar]

* Michal Hocko <mhocko@kernel.org> wrote:

> On Fri 01-04-16 08:33:48, Ingo Molnar wrote:
> [...]
> > I can help on the Git level: I can do tip:locking/rwsem tree with only these 
> > changes, with stable sha1's, on which the remaining work can be based. The
> > locking tree typically goes in early during the merge window, so there's no
> > real dependencies.
> 
> OK, I will wait for this series to apear in tip:locking/rwsem and then post the 
> follow up patches to Andrew. [...]

Well, 'this series' was posted a month ago, and patch #3 had a discussion and some 
corrections to it - so please re-send with a v4.6-rc1 base. (v4.5 is fine too if 
you double check that v4.6-rc1 merges cleanly with it.)

Thanks,

	Ingo

Re: [PATCH 0/11] introduce down_write_killable for rw_semaphore

[Michal Hocko]

On Fri 01-04-16 11:50:00, Ingo Molnar wrote:
> 
> * Michal Hocko <mhocko@kernel.org> wrote:
> 
> > On Fri 01-04-16 08:33:48, Ingo Molnar wrote:
> > [...]
> > > I can help on the Git level: I can do tip:locking/rwsem tree with only these 
> > > changes, with stable sha1's, on which the remaining work can be based. The
> > > locking tree typically goes in early during the merge window, so there's no
> > > real dependencies.
> > 
> > OK, I will wait for this series to apear in tip:locking/rwsem and then post the 
> > follow up patches to Andrew. [...]
> 
> Well, 'this series' was posted a month ago, and patch #3 had a discussion and some 
> corrections to it - so please re-send with a v4.6-rc1 base. (v4.5 is fine too if 
> you double check that v4.6-rc1 merges cleanly with it.)

Sure will do.

Thanks!
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Ingo Molnar]

* Peter Zijlstra <peterz@infradead.org> wrote:

> On Wed, Apr 13, 2016 at 02:49:43PM +0200, Michal Hocko wrote:
> > On Wed 13-04-16 12:27:31, Ingo Molnar wrote:
> > > 
> > > * Ingo Molnar <mingo@kernel.org> wrote:
> > > 
> > > > I'm testing your patches today, if they are otherwise OK [...]
> > > 
> > > got this build failure:
> > > 
> > >   ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has impossible constraints
> > 
> > Hmm, I have no idea why 64b didn't have problem with the asm but 32b
> > complains. Anyway, the following makes both happy. I have checked the
> > generated code for 64b and it hasn't changed after the patch. 32b also
> > seems to be generating a proper code. My gcc asm()-foo is rather weak so
> > I would feel better if somebody double checked after me.
> 
> I completely blow at this gcc-asm constraints thing too :/
> 
> In any case, Ingo will you look after the rest of these patches, or do
> you want me to pick up the remaining bits?

Yeah, it's on my list!

Thanks,

	Ingo
--
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Ingo Molnar]

* Peter Zijlstra <peterz@infradead.org> wrote:

> On Wed, Apr 13, 2016 at 02:49:43PM +0200, Michal Hocko wrote:
> > On Wed 13-04-16 12:27:31, Ingo Molnar wrote:
> > > 
> > > * Ingo Molnar <mingo@kernel.org> wrote:
> > > 
> > > > I'm testing your patches today, if they are otherwise OK [...]
> > > 
> > > got this build failure:
> > > 
> > >   ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has impossible constraints
> > 
> > Hmm, I have no idea why 64b didn't have problem with the asm but 32b
> > complains. Anyway, the following makes both happy. I have checked the
> > generated code for 64b and it hasn't changed after the patch. 32b also
> > seems to be generating a proper code. My gcc asm()-foo is rather weak so
> > I would feel better if somebody double checked after me.
> 
> I completely blow at this gcc-asm constraints thing too :/
> 
> In any case, Ingo will you look after the rest of these patches, or do
> you want me to pick up the remaining bits?

Yeah, it's on my list!

Thanks,

	Ingo

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Borislav Petkov]

On Thu, Apr 21, 2016 at 09:09:11AM -0400, Michal Hocko wrote:
> Thanks Boris! This is highly appreciated.

I know ;-)

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Borislav Petkov]

On Thu, Apr 21, 2016 at 09:09:11AM -0400, Michal Hocko wrote:
> Thanks Boris! This is highly appreciated.

I know ;-)

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

On Thu 21-04-16 13:35:16, Borislav Petkov wrote:
> On Wed, Apr 20, 2016 at 03:29:30PM -0700, H. Peter Anvin wrote:
> > Since it is a fixed register we could just mark edx clobbered, but
> > with more flexible register constraints it can permit gcc to allocate
> > a temp resister for us. --
> 
> Right.
> 
> I'll try to hack up a cleanup ontop once the dust here settles and Ingo
> pushes out the pile.

Thanks Boris! This is highly appreciated.
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

On Thu 21-04-16 13:35:16, Borislav Petkov wrote:
> On Wed, Apr 20, 2016 at 03:29:30PM -0700, H. Peter Anvin wrote:
> > Since it is a fixed register we could just mark edx clobbered, but
> > with more flexible register constraints it can permit gcc to allocate
> > a temp resister for us. --
> 
> Right.
> 
> I'll try to hack up a cleanup ontop once the dust here settles and Ingo
> pushes out the pile.

Thanks Boris! This is highly appreciated.
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Borislav Petkov]

On Wed, Apr 20, 2016 at 03:29:30PM -0700, H. Peter Anvin wrote:
> Since it is a fixed register we could just mark edx clobbered, but
> with more flexible register constraints it can permit gcc to allocate
> a temp resister for us. --

Right.

I'll try to hack up a cleanup ontop once the dust here settles and Ingo
pushes out the pile.

Thanks.

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Borislav Petkov]

On Wed, Apr 20, 2016 at 03:29:30PM -0700, H. Peter Anvin wrote:
> Since it is a fixed register we could just mark edx clobbered, but
> with more flexible register constraints it can permit gcc to allocate
> a temp resister for us. --

Right.

I'll try to hack up a cleanup ontop once the dust here settles and Ingo
pushes out the pile.

Thanks.

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[H. Peter Anvin]

On April 20, 2016 2:36:37 PM PDT, Borislav Petkov <bp@alien8.de> wrote:
>On Wed, Apr 20, 2016 at 02:06:33PM -0700, H. Peter Anvin wrote:
>> Setting ret to sem doesn't make any sense.  Just use "=a" and "a".
>
>Yeah, that's what Michal's patch ontop does.
>
>And to answer my own question: we need the "a" (sem) input for the fast
>path.
>
>I guess we can still move "1" (RWSEM_ACTIVE_WRITE_BIAS) before the
>asm():
>
>	long tmp = RWSEM_ACTIVE_WRITE_BIAS;
>
>One thing I'm still not clear on is why we need the output tmp operand:
>"=d" (tmp) ?

Since it is a fixed register we could just mark edx clobbered, but with more flexible register constraints it can permit gcc to allocate a temp resister for us.
-- 
Sent from my Android device with K-9 Mail. Please excuse brevity and formatting.

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[H. Peter Anvin]

On April 20, 2016 2:36:37 PM PDT, Borislav Petkov <bp@alien8.de> wrote:
>On Wed, Apr 20, 2016 at 02:06:33PM -0700, H. Peter Anvin wrote:
>> Setting ret to sem doesn't make any sense.  Just use "=a" and "a".
>
>Yeah, that's what Michal's patch ontop does.
>
>And to answer my own question: we need the "a" (sem) input for the fast
>path.
>
>I guess we can still move "1" (RWSEM_ACTIVE_WRITE_BIAS) before the
>asm():
>
>	long tmp = RWSEM_ACTIVE_WRITE_BIAS;
>
>One thing I'm still not clear on is why we need the output tmp operand:
>"=d" (tmp) ?

Since it is a fixed register we could just mark edx clobbered, but with more flexible register constraints it can permit gcc to allocate a temp resister for us.
-- 
Sent from my Android device with K-9 Mail. Please excuse brevity and formatting.

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Borislav Petkov]

On Wed, Apr 20, 2016 at 02:06:33PM -0700, H. Peter Anvin wrote:
> Setting ret to sem doesn't make any sense.  Just use "=a" and "a".

Yeah, that's what Michal's patch ontop does.

And to answer my own question: we need the "a" (sem) input for the fast
path.

I guess we can still move "1" (RWSEM_ACTIVE_WRITE_BIAS) before the asm():

	long tmp = RWSEM_ACTIVE_WRITE_BIAS;

One thing I'm still not clear on is why we need the output tmp operand:
"=d" (tmp) ?

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[H. Peter Anvin]

On 04/20/2016 01:45 PM, Borislav Petkov wrote:
> On Wed, Apr 20, 2016 at 11:04:05AM -0700, H. Peter Anvin wrote:
>> The reason it breaks is because the same register can't be an
>> input-output register and a separate input. However, the input side of
>> the input-output is probably undefined, and so gcc may not notice.
> 
> So Michal and I talked about this a while ago. Why do we need the '"a"
> (sem)' input dependency if '"+a" (ret)' already supplies the same thing?
> 

Setting ret to sem doesn't make any sense.  Just use "=a" and "a".

	-hpa

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[H. Peter Anvin]

On 04/20/2016 01:45 PM, Borislav Petkov wrote:
> On Wed, Apr 20, 2016 at 11:04:05AM -0700, H. Peter Anvin wrote:
>> The reason it breaks is because the same register can't be an
>> input-output register and a separate input. However, the input side of
>> the input-output is probably undefined, and so gcc may not notice.
> 
> So Michal and I talked about this a while ago. Why do we need the '"a"
> (sem)' input dependency if '"+a" (ret)' already supplies the same thing?
> 

Setting ret to sem doesn't make any sense.  Just use "=a" and "a".

	-hpa

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

On Wed 20-04-16 22:45:01, Borislav Petkov wrote:
> On Wed, Apr 20, 2016 at 11:04:05AM -0700, H. Peter Anvin wrote:
> > The reason it breaks is because the same register can't be an
> > input-output register and a separate input. However, the input side of
> > the input-output is probably undefined, and so gcc may not notice.
> 
> So Michal and I talked about this a while ago. Why do we need the '"a"
> (sem)' input dependency if '"+a" (ret)' already supplies the same thing?
> 
> There's also that "=d" (tmp) thing which we don't really need as an
> output, right?
> 
> I.e., can we simplify like this?

I am for any simplification, my gcc-asm-foo is just too weak and I
wanted my change to be as minimal as possible. So if you feel you can
clean up this I would more than welcome that. Maybe a follow up patch
would be a better approach so that we can check that the generated code
hasn't changed.

Thanks!
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

On Wed 20-04-16 22:45:01, Borislav Petkov wrote:
> On Wed, Apr 20, 2016 at 11:04:05AM -0700, H. Peter Anvin wrote:
> > The reason it breaks is because the same register can't be an
> > input-output register and a separate input. However, the input side of
> > the input-output is probably undefined, and so gcc may not notice.
> 
> So Michal and I talked about this a while ago. Why do we need the '"a"
> (sem)' input dependency if '"+a" (ret)' already supplies the same thing?
> 
> There's also that "=d" (tmp) thing which we don't really need as an
> output, right?
> 
> I.e., can we simplify like this?

I am for any simplification, my gcc-asm-foo is just too weak and I
wanted my change to be as minimal as possible. So if you feel you can
clean up this I would more than welcome that. Maybe a follow up patch
would be a better approach so that we can check that the generated code
hasn't changed.

Thanks!
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Borislav Petkov]

On Wed, Apr 20, 2016 at 11:04:05AM -0700, H. Peter Anvin wrote:
> The reason it breaks is because the same register can't be an
> input-output register and a separate input. However, the input side of
> the input-output is probably undefined, and so gcc may not notice.

So Michal and I talked about this a while ago. Why do we need the '"a"
(sem)' input dependency if '"+a" (ret)' already supplies the same thing?

There's also that "=d" (tmp) thing which we don't really need as an
output, right?

I.e., can we simplify like this?

---
#define ____down_write(sem, slow_path)                  \
({                                                      \
        long tmp = RWSEM_ACTIVE_WRITE_BIAS;             \
	struct rw_semaphore* ret = sem;			\
                                                        \
        asm volatile("# beginning down_write\n\t"       \
                     LOCK_PREFIX "  xadd      %[tmp],(%[ret])\n\t"      \
                     /* adds 0xffff0001, returns the old value */ \
                     "  test " __ASM_SEL(%w[tmp],%k[tmp]) "," __ASM_SEL(%w[tmp],%k[tmp]) "\n\t" \
                     /* was the active mask 0 before? */\
                     "  jz        1f\n"                 \
                     "  call " slow_path "\n"           \
                     "1:\n"                             \
                     "# ending down_write"              \
                     : "+m" (sem->count), [ret] "+a" (ret) \
                     : [tmp] "d" (tmp)                  \
                     : "memory", "cc");                 \
        ret;                                            \
})

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Borislav Petkov]

On Wed, Apr 20, 2016 at 11:04:05AM -0700, H. Peter Anvin wrote:
> The reason it breaks is because the same register can't be an
> input-output register and a separate input. However, the input side of
> the input-output is probably undefined, and so gcc may not notice.

So Michal and I talked about this a while ago. Why do we need the '"a"
(sem)' input dependency if '"+a" (ret)' already supplies the same thing?

There's also that "=d" (tmp) thing which we don't really need as an
output, right?

I.e., can we simplify like this?

---
#define ____down_write(sem, slow_path)                  \
({                                                      \
        long tmp = RWSEM_ACTIVE_WRITE_BIAS;             \
	struct rw_semaphore* ret = sem;			\
                                                        \
        asm volatile("# beginning down_write\n\t"       \
                     LOCK_PREFIX "  xadd      %[tmp],(%[ret])\n\t"      \
                     /* adds 0xffff0001, returns the old value */ \
                     "  test " __ASM_SEL(%w[tmp],%k[tmp]) "," __ASM_SEL(%w[tmp],%k[tmp]) "\n\t" \
                     /* was the active mask 0 before? */\
                     "  jz        1f\n"                 \
                     "  call " slow_path "\n"           \
                     "1:\n"                             \
                     "# ending down_write"              \
                     : "+m" (sem->count), [ret] "+a" (ret) \
                     : [tmp] "d" (tmp)                  \
                     : "memory", "cc");                 \
        ret;                                            \
})

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[H. Peter Anvin]

On April 20, 2016 6:40:19 AM PDT, Peter Zijlstra <peterz@infradead.org> wrote:
>On Wed, Apr 13, 2016 at 02:49:43PM +0200, Michal Hocko wrote:
>> On Wed 13-04-16 12:27:31, Ingo Molnar wrote:
>> > 
>> > * Ingo Molnar <mingo@kernel.org> wrote:
>> > 
>> > > I'm testing your patches today, if they are otherwise OK [...]
>> > 
>> > got this build failure:
>> > 
>> >   ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has
>impossible constraints
>> 
>> Hmm, I have no idea why 64b didn't have problem with the asm but 32b
>> complains. Anyway, the following makes both happy. I have checked the
>> generated code for 64b and it hasn't changed after the patch. 32b
>also
>> seems to be generating a proper code. My gcc asm()-foo is rather weak
>so
>> I would feel better if somebody double checked after me.
>
>I completely blow at this gcc-asm constraints thing too :/
>
>In any case, Ingo will you look after the rest of these patches, or do
>you want me to pick up the remaining bits?

The reason it breaks is because the same register can't be an input-output register and a separate input.  However, the input side of the input-output is probably undefined, and so gcc may not notice.
-- 
Sent from my Android device with K-9 Mail. Please excuse brevity and formatting.

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[H. Peter Anvin]

On April 20, 2016 6:40:19 AM PDT, Peter Zijlstra <peterz@infradead.org> wrote:
>On Wed, Apr 13, 2016 at 02:49:43PM +0200, Michal Hocko wrote:
>> On Wed 13-04-16 12:27:31, Ingo Molnar wrote:
>> > 
>> > * Ingo Molnar <mingo@kernel.org> wrote:
>> > 
>> > > I'm testing your patches today, if they are otherwise OK [...]
>> > 
>> > got this build failure:
>> > 
>> >   ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has
>impossible constraints
>> 
>> Hmm, I have no idea why 64b didn't have problem with the asm but 32b
>> complains. Anyway, the following makes both happy. I have checked the
>> generated code for 64b and it hasn't changed after the patch. 32b
>also
>> seems to be generating a proper code. My gcc asm()-foo is rather weak
>so
>> I would feel better if somebody double checked after me.
>
>I completely blow at this gcc-asm constraints thing too :/
>
>In any case, Ingo will you look after the rest of these patches, or do
>you want me to pick up the remaining bits?

The reason it breaks is because the same register can't be an input-output register and a separate input.  However, the input side of the input-output is probably undefined, and so gcc may not notice.
-- 
Sent from my Android device with K-9 Mail. Please excuse brevity and formatting.

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Peter Zijlstra]

On Wed, Apr 13, 2016 at 02:49:43PM +0200, Michal Hocko wrote:
> On Wed 13-04-16 12:27:31, Ingo Molnar wrote:
> > 
> > * Ingo Molnar <mingo@kernel.org> wrote:
> > 
> > > I'm testing your patches today, if they are otherwise OK [...]
> > 
> > got this build failure:
> > 
> >   ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has impossible constraints
> 
> Hmm, I have no idea why 64b didn't have problem with the asm but 32b
> complains. Anyway, the following makes both happy. I have checked the
> generated code for 64b and it hasn't changed after the patch. 32b also
> seems to be generating a proper code. My gcc asm()-foo is rather weak so
> I would feel better if somebody double checked after me.

I completely blow at this gcc-asm constraints thing too :/

In any case, Ingo will you look after the rest of these patches, or do
you want me to pick up the remaining bits?
--
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Peter Zijlstra]

On Wed, Apr 13, 2016 at 02:49:43PM +0200, Michal Hocko wrote:
> On Wed 13-04-16 12:27:31, Ingo Molnar wrote:
> > 
> > * Ingo Molnar <mingo@kernel.org> wrote:
> > 
> > > I'm testing your patches today, if they are otherwise OK [...]
> > 
> > got this build failure:
> > 
> >   ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has impossible constraints
> 
> Hmm, I have no idea why 64b didn't have problem with the asm but 32b
> complains. Anyway, the following makes both happy. I have checked the
> generated code for 64b and it hasn't changed after the patch. 32b also
> seems to be generating a proper code. My gcc asm()-foo is rather weak so
> I would feel better if somebody double checked after me.

I completely blow at this gcc-asm constraints thing too :/

In any case, Ingo will you look after the rest of these patches, or do
you want me to pick up the remaining bits?

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

On Wed 13-04-16 14:49:43, Michal Hocko wrote:
> On Wed 13-04-16 12:27:31, Ingo Molnar wrote:
> > 
> > * Ingo Molnar <mingo@kernel.org> wrote:
> > 
> > > I'm testing your patches today, if they are otherwise OK [...]
> > 
> > got this build failure:
> > 
> >   ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has impossible constraints
> 
> Hmm, I have no idea why 64b didn't have problem with the asm but 32b
> complains. Anyway, the following makes both happy. I have checked the
> generated code for 64b and it hasn't changed after the patch. 32b also
> seems to be generating a proper code. My gcc asm()-foo is rather weak so
> I would feel better if somebody double checked after me.

Peter, Ingo, does the patch makes sense to you?
Thanks!

> ---
> From d23f4e6994670bf2c5d864f2190f21022b4499b2 Mon Sep 17 00:00:00 2001
> From: Michal Hocko <mhocko@suse.com>
> Date: Wed, 13 Apr 2016 14:21:25 +0200
> Subject: [PATCH] x86: __down_read_trylock fix 32b build failure
> MIME-Version: 1.0
> Content-Type: text/plain; charset=UTF-8
> Content-Transfer-Encoding: 8bit
> 
> Ingo has noticed the following compilation error with CONFIG_X86_32=y
> ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has impossible constraints
> 
> The reason seems to be that 32b doesn't like ret being input and output
> argument sharing the same register with sem which is only the input. Fix
> this by making ret output only and use %3 (aka sem) for xadd.
> 
> ret initialization is not needed now because this is done implicitly
> by the asm even for the fast path as both sem and ret share the same
> register.
> 
> Reported-by: Ingo Molnar <mingo@kernel.org>
> Signed-off-by: Michal Hocko <mhocko@suse.com>
> ---
>  arch/x86/include/asm/rwsem.h | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
> index d759c5f70f49..453744c1d347 100644
> --- a/arch/x86/include/asm/rwsem.h
> +++ b/arch/x86/include/asm/rwsem.h
> @@ -102,9 +102,9 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
>  #define ____down_write(sem, slow_path)			\
>  ({							\
>  	long tmp;					\
> -	struct rw_semaphore* ret = sem;			\
> +	struct rw_semaphore* ret;			\
>  	asm volatile("# beginning down_write\n\t"	\
> -		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"	\
> +		     LOCK_PREFIX "  xadd      %1,(%3)\n\t"	\
>  		     /* adds 0xffff0001, returns the old value */ \
>  		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t" \
>  		     /* was the active mask 0 before? */\
> @@ -112,7 +112,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
>  		     "  call " slow_path "\n"		\
>  		     "1:\n"				\
>  		     "# ending down_write"		\
> -		     : "+m" (sem->count), "=d" (tmp), "+a" (ret)	\
> +		     : "+m" (sem->count), "=d" (tmp), "=a" (ret)	\
>  		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS) \
>  		     : "memory", "cc");			\
>  	ret;						\
> -- 
> 2.8.0.rc3
> 
> -- 
> Michal Hocko
> SUSE Labs

-- 
Michal Hocko
SUSE Labs
--
To unsubscribe from this list: send the line "unsubscribe linux-alpha" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

On Wed 13-04-16 14:49:43, Michal Hocko wrote:
> On Wed 13-04-16 12:27:31, Ingo Molnar wrote:
> > 
> > * Ingo Molnar <mingo@kernel.org> wrote:
> > 
> > > I'm testing your patches today, if they are otherwise OK [...]
> > 
> > got this build failure:
> > 
> >   ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has impossible constraints
> 
> Hmm, I have no idea why 64b didn't have problem with the asm but 32b
> complains. Anyway, the following makes both happy. I have checked the
> generated code for 64b and it hasn't changed after the patch. 32b also
> seems to be generating a proper code. My gcc asm()-foo is rather weak so
> I would feel better if somebody double checked after me.

Peter, Ingo, does the patch makes sense to you?
Thanks!

> ---
> From d23f4e6994670bf2c5d864f2190f21022b4499b2 Mon Sep 17 00:00:00 2001
> From: Michal Hocko <mhocko@suse.com>
> Date: Wed, 13 Apr 2016 14:21:25 +0200
> Subject: [PATCH] x86: __down_read_trylock fix 32b build failure
> MIME-Version: 1.0
> Content-Type: text/plain; charset=UTF-8
> Content-Transfer-Encoding: 8bit
> 
> Ingo has noticed the following compilation error with CONFIG_X86_32=y
> ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has impossible constraints
> 
> The reason seems to be that 32b doesn't like ret being input and output
> argument sharing the same register with sem which is only the input. Fix
> this by making ret output only and use %3 (aka sem) for xadd.
> 
> ret initialization is not needed now because this is done implicitly
> by the asm even for the fast path as both sem and ret share the same
> register.
> 
> Reported-by: Ingo Molnar <mingo@kernel.org>
> Signed-off-by: Michal Hocko <mhocko@suse.com>
> ---
>  arch/x86/include/asm/rwsem.h | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
> index d759c5f70f49..453744c1d347 100644
> --- a/arch/x86/include/asm/rwsem.h
> +++ b/arch/x86/include/asm/rwsem.h
> @@ -102,9 +102,9 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
>  #define ____down_write(sem, slow_path)			\
>  ({							\
>  	long tmp;					\
> -	struct rw_semaphore* ret = sem;			\
> +	struct rw_semaphore* ret;			\
>  	asm volatile("# beginning down_write\n\t"	\
> -		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"	\
> +		     LOCK_PREFIX "  xadd      %1,(%3)\n\t"	\
>  		     /* adds 0xffff0001, returns the old value */ \
>  		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t" \
>  		     /* was the active mask 0 before? */\
> @@ -112,7 +112,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
>  		     "  call " slow_path "\n"		\
>  		     "1:\n"				\
>  		     "# ending down_write"		\
> -		     : "+m" (sem->count), "=d" (tmp), "+a" (ret)	\
> +		     : "+m" (sem->count), "=d" (tmp), "=a" (ret)	\
>  		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS) \
>  		     : "memory", "cc");			\
>  	ret;						\
> -- 
> 2.8.0.rc3
> 
> -- 
> Michal Hocko
> SUSE Labs

-- 
Michal Hocko
SUSE Labs

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

On Wed 13-04-16 12:27:31, Ingo Molnar wrote:
> 
> * Ingo Molnar <mingo@kernel.org> wrote:
> 
> > I'm testing your patches today, if they are otherwise OK [...]
> 
> got this build failure:
> 
>   ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has impossible constraints

Hmm, I have no idea why 64b didn't have problem with the asm but 32b
complains. Anyway, the following makes both happy. I have checked the
generated code for 64b and it hasn't changed after the patch. 32b also
seems to be generating a proper code. My gcc asm()-foo is rather weak so
I would feel better if somebody double checked after me.
---
From d23f4e6994670bf2c5d864f2190f21022b4499b2 Mon Sep 17 00:00:00 2001
From: Michal Hocko <mhocko@suse.com>
Date: Wed, 13 Apr 2016 14:21:25 +0200
Subject: [PATCH] x86: __down_read_trylock fix 32b build failure
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Ingo has noticed the following compilation error with CONFIG_X86_32=y
./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has impossible constraints

The reason seems to be that 32b doesn't like ret being input and output
argument sharing the same register with sem which is only the input. Fix
this by making ret output only and use %3 (aka sem) for xadd.

ret initialization is not needed now because this is done implicitly
by the asm even for the fast path as both sem and ret share the same
register.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/x86/include/asm/rwsem.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
index d759c5f70f49..453744c1d347 100644
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -102,9 +102,9 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 #define ____down_write(sem, slow_path)			\
 ({							\
 	long tmp;					\
-	struct rw_semaphore* ret = sem;			\
+	struct rw_semaphore* ret;			\
 	asm volatile("# beginning down_write\n\t"	\
-		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"	\
+		     LOCK_PREFIX "  xadd      %1,(%3)\n\t"	\
 		     /* adds 0xffff0001, returns the old value */ \
 		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t" \
 		     /* was the active mask 0 before? */\
@@ -112,7 +112,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 		     "  call " slow_path "\n"		\
 		     "1:\n"				\
 		     "# ending down_write"		\
-		     : "+m" (sem->count), "=d" (tmp), "+a" (ret)	\
+		     : "+m" (sem->count), "=d" (tmp), "=a" (ret)	\
 		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS) \
 		     : "memory", "cc");			\
 	ret;						\
-- 
2.8.0.rc3

-- 
Michal Hocko
SUSE Labs
--
To unsubscribe from this list: send the line "unsubscribe linux-alpha" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

On Wed 13-04-16 12:27:31, Ingo Molnar wrote:
> 
> * Ingo Molnar <mingo@kernel.org> wrote:
> 
> > I'm testing your patches today, if they are otherwise OK [...]
> 
> got this build failure:
> 
>   ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has impossible constraints

Hmm, I have no idea why 64b didn't have problem with the asm but 32b
complains. Anyway, the following makes both happy. I have checked the
generated code for 64b and it hasn't changed after the patch. 32b also
seems to be generating a proper code. My gcc asm()-foo is rather weak so
I would feel better if somebody double checked after me.
---

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 428 bytes --]


* Ingo Molnar <mingo@kernel.org> wrote:

> I'm testing your patches today, if they are otherwise OK [...]

got this build failure:

  ./arch/x86/include/asm/rwsem.h:106:2: error: ‘asm’ operand has impossible constraints

with the attached config and with:

  gcc version 5.3.1 20151207 (Red Hat 5.3.1-2) (GCC) 

Please send a delta patch for this bug too - I'll squash the fix into the 
originating commit.

Thanks,

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 123054 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.6.0-rc3 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_32_SMP=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_KERNEL_LZ4=y
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_KTHREAD_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
# CONFIG_RCU_NOCB_CPU is not set
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=m
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_USERFAULTFD=y
# CONFIG_PCI_QUIRKS is not set
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
# CONFIG_MODULE_SIG_ALL is not set

#
# Do not forget to sign required modules with scripts/sign-file
#
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_CMDLINE_PARSER=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_CMDLINE_PARTITION=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_GOLDFISH is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_QUEUED_LOCK_STAT=y
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set

#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_INTEL_UNCORE is not set
# CONFIG_PERF_EVENTS_INTEL_RAPL is not set
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
CONFIG_PERF_EVENTS_AMD_POWER=y
CONFIG_X86_LEGACY_VM86=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=y
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
CONFIG_VMSPLIT_2G_OPT=y
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0x78000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# CONFIG_BOUNCE is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZPOOL=m
# CONFIG_ZBUD is not set
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
CONFIG_X86_INTEL_MPX=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM is not set
CONFIG_PM_OPP=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=m
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K6=m
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=m
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
CONFIG_X86_LONGRUN=y
CONFIG_X86_LONGHAUL=m
CONFIG_X86_E_POWERSAVER=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
CONFIG_PCI_GODIRECT=y
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
# CONFIG_PCIEASPM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
# CONFIG_HT_IRQ is not set
CONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI host controller drivers
#
# CONFIG_PCIE_DW_PLAT is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
# CONFIG_OLPC is not set
CONFIG_ALIX=y
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
# CONFIG_YENTA_ENE_TUNE is not set
# CONFIG_YENTA_TOSHIBA is not set
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=y
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_RAPIDIO=m
CONFIG_RAPIDIO_TSI721=m
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DMA_ENGINE=y
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=m
CONFIG_RAPIDIO_MPORT_CDEV=m

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=m
CONFIG_RAPIDIO_CPS_XX=m
CONFIG_RAPIDIO_TSI568=m
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_PMC_ATOM=y
CONFIG_VMD=m
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=m
# CONFIG_SYN_COOKIES is not set
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
CONFIG_DEFAULT_HTCP=y
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="htcp"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_VTI=m
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
# CONFIG_IP_DCCP_CCID3 is not set

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
# CONFIG_ATM_BR2684 is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
# CONFIG_L2TP_ETH is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
# CONFIG_LTPC is not set
# CONFIG_COPS is not set
# CONFIG_IPDDP is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_6LOWPAN=y
# CONFIG_6LOWPAN_DEBUGFS is not set
CONFIG_6LOWPAN_NHC=y
# CONFIG_6LOWPAN_NHC_DEST is not set
CONFIG_6LOWPAN_NHC_FRAGMENT=y
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=y
# CONFIG_6LOWPAN_NHC_MOBILITY is not set
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=y
# CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set
CONFIG_6LOWPAN_GHC_UDP=y
CONFIG_6LOWPAN_GHC_ICMPV6=y
# CONFIG_6LOWPAN_GHC_EXT_HDR_DEST is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG is not set
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=y
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
# CONFIG_BATMAN_ADV_NC is not set
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=y
# CONFIG_OPENVSWITCH_GRE is not set
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=y
CONFIG_VSOCKETS=y
CONFIG_VMWARE_VMCI_VSOCKETS=m
# CONFIG_NETLINK_DIAG is not set
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=m
CONFIG_HSR=m
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=m
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
# CONFIG_NETROM is not set
# CONFIG_ROSE is not set

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
# CONFIG_BPQETHER is not set
CONFIG_SCC=m
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
# CONFIG_BAYCOM_SER_FDX is not set
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_YAM=m
# CONFIG_CAN is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRNET is not set
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not set
CONFIG_ACTISYS_DONGLE=m
# CONFIG_TEKRAM_DONGLE is not set
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
# CONFIG_GIRBIL_DONGLE is not set
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
# CONFIG_BT_BREDR is not set
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=m
# CONFIG_BT_LEDS is not set
CONFIG_BT_SELFTEST=y
CONFIG_BT_SELFTEST_ECDH=y
CONFIG_BT_SELFTEST_SMP=y
CONFIG_BT_DEBUGFS=y

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTUSB_BCM is not set
# CONFIG_BT_HCIBTUSB_RTL is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
CONFIG_BT_HCIBTUART=m
# CONFIG_BT_HCIVHCI is not set
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_WILINK=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_REGULATOR=m
CONFIG_RFKILL_GPIO=m
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
# CONFIG_CAIF_USB is not set
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=m
CONFIG_NFC_NCI_SPI=m
CONFIG_NFC_NCI_UART=m
CONFIG_NFC_HCI=m
# CONFIG_NFC_SHDLC is not set

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=m
CONFIG_NFC_WILINK=m
CONFIG_NFC_MEI_PHY=m
CONFIG_NFC_SIM=m
# CONFIG_NFC_FDP is not set
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_MEI=m
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_MEI=m
CONFIG_NFC_MRVL=m
CONFIG_NFC_MRVL_USB=m
CONFIG_NFC_MRVL_UART=m
CONFIG_NFC_MRVL_I2C=m
# CONFIG_NFC_MRVL_SPI is not set
CONFIG_NFC_ST_NCI=m
CONFIG_NFC_ST_NCI_I2C=m
# CONFIG_NFC_ST_NCI_SPI is not set
CONFIG_NFC_NXP_NCI=m
CONFIG_NFC_NXP_NCI_I2C=m
# CONFIG_NFC_S3FWRN5_I2C is not set
CONFIG_LWTUNNEL=y
CONFIG_DST_CACHE=y
CONFIG_NET_DEVLINK=m
CONFIG_MAY_USE_DEVLINK=m

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_PERCENTAGE=0
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
# CONFIG_ZRAM_LZ4_COMPRESS is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=y
# CONFIG_DRBD_FAULT_INJECTION is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_OSD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
CONFIG_BLK_DEV_HD=y
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RSXX=m
# CONFIG_BLK_DEV_NVME is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_AD525X_DPOT_SPI=m
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=y
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_CS5535_MFGPT=m
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=m
CONFIG_ISL29020=m
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1780=y
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=y
CONFIG_VMWARE_BALLOON=m
CONFIG_BMP085=m
CONFIG_BMP085_I2C=m
# CONFIG_BMP085_SPI is not set
CONFIG_PCH_PHUB=m
CONFIG_USB_SWITCH_FSA9480=m
CONFIG_LATTICE_ECP3_CONFIG=m
# CONFIG_SRAM is not set
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=y
# CONFIG_INTEL_MEI_ME is not set
CONFIG_INTEL_MEI_TXE=y
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
CONFIG_ECHO=m
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_KERNEL_API is not set
# CONFIG_CXL_EEH is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_MQ_DEFAULT=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_ENCLOSURE is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_CXGB3_ISCSI=m
# CONFIG_SCSI_CXGB4_ISCSI is not set
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=y
# CONFIG_SCSI_AHA152X is not set
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=y
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_IN2000=y
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_UFSHCD is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_HYPERV_STORAGE is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_DTC3280=y
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_GENERIC_NCR5380=y
CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_PAS16=m
# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_SYM53C416=y
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=y
# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_WD719X=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=y
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
# CONFIG_PCMCIA_FDOMAIN is not set
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_CEVA is not set
CONFIG_AHCI_QORIQ=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_ACARD_AHCI=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=m
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=m
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
# CONFIG_PATA_HPT3X2N is not set
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=m
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
# CONFIG_PATA_ISAPNP is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=m
# CONFIG_PATA_OF_PLATFORM is not set
CONFIG_PATA_QDI=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_WINBOND_VLB=y

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
# CONFIG_MD is not set
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=y
# CONFIG_ISCSI_TARGET is not set
CONFIG_SBP_TARGET=m
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=y
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=y
# CONFIG_MACVTAP is not set
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=m
CONFIG_GENEVE=y
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=m
CONFIG_RIONET=m
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=m
CONFIG_TUN_VNET_CROSS_LE=y
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
CONFIG_ARCNET=m
# CONFIG_ARCNET_1201 is not set
CONFIG_ARCNET_1051=m
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
# CONFIG_ARCNET_RIM_I is not set
# CONFIG_ARCNET_COM20020 is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
CONFIG_ATM_ENI_TUNE_BURST=y
CONFIG_ATM_ENI_BURST_TX_16W=y
CONFIG_ATM_ENI_BURST_TX_8W=y
# CONFIG_ATM_ENI_BURST_TX_4W is not set
# CONFIG_ATM_ENI_BURST_TX_2W is not set
# CONFIG_ATM_ENI_BURST_RX_16W is not set
# CONFIG_ATM_ENI_BURST_RX_8W is not set
CONFIG_ATM_ENI_BURST_RX_4W=y
# CONFIG_ATM_ENI_BURST_RX_2W is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=m
CONFIG_ATM_ZATM_DEBUG=y
# CONFIG_ATM_NICSTAR is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
# CONFIG_ATM_SOLOS is not set

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=m
CONFIG_CAIF_SPI_SLAVE=m
# CONFIG_CAIF_SPI_SYNC is not set
CONFIG_CAIF_HSI=m
CONFIG_CAIF_VIRTIO=m
# CONFIG_VHOST_NET is not set
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_RING=m
CONFIG_VHOST=m
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=y
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_ALTERA_TSE=y
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_ARC_EMAC_CORE=m
CONFIG_ARC_EMAC=m
# CONFIG_EMAC_ROCKCHIP is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_CADENCE is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BCMGENET=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
CONFIG_BNX2X=m
CONFIG_BNX2X_VXLAN=y
CONFIG_BNX2X_GENEVE=y
CONFIG_SYSTEMPORT=y
CONFIG_BNXT=m
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_UWIRE is not set
# CONFIG_CHELSIO_T4VF is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_CISCO is not set
CONFIG_CX_ECAT=y
CONFIG_DNET=m
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
# CONFIG_IGB_HWMON is not set
CONFIG_IGBVF=m
CONFIG_IXGB=y
CONFIG_IXGBE=y
# CONFIG_IXGBE_HWMON is not set
CONFIG_IXGBEVF=m
CONFIG_I40E=y
CONFIG_I40E_GENEVE=y
CONFIG_I40EVF=y
CONFIG_FM10K=y
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_JME=y
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
CONFIG_MLX5_CORE=m
# CONFIG_MLX5_CORE_EN is not set
CONFIG_MLXSW_CORE=m
# CONFIG_MLXSW_CORE_HWMON is not set
# CONFIG_MLXSW_PCI is not set
CONFIG_MLXSW_SWITCHX2=m
CONFIG_MLXSW_SPECTRUM=m
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851=y
CONFIG_KS8851_MLL=m
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=m
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_ENCX24J600=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=y
CONFIG_FEALNX=m
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP_NETVF is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=y
CONFIG_ETHOC=y
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=y
CONFIG_QLCNIC=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
# CONFIG_QED is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=y
CONFIG_SIS190=m
CONFIG_SFC=m
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_MCDI_LOGGING=y
# CONFIG_NET_VENDOR_SMSC is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
CONFIG_TLAN=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XIRCOM is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_AQUANTIA_PHY=m
CONFIG_AT803X_PHY=y
# CONFIG_AMD_PHY is not set
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=m
CONFIG_TERANETICS_PHY=y
# CONFIG_SMSC_PHY is not set
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM7XXX_PHY=y
# CONFIG_BCM87XX_PHY is not set
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MICREL_PHY=y
CONFIG_DP83848_PHY=m
# CONFIG_DP83867_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_GPIO=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_MDIO_BCM_UNIMAC=m
CONFIG_MICREL_KS8995MA=m
CONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
# CONFIG_PPPOL2TP is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=m
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN is not set

#
# WiMAX Wireless Broadband devices
#
# CONFIG_WIMAX_I2400M_USB is not set
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
# CONFIG_COSA is not set
CONFIG_LANMEDIA=m
# CONFIG_SEALEVEL_4021 is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=y
# CONFIG_HDLC_FR is not set
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=m
# CONFIG_PCI200SYN is not set
CONFIG_WANXL=y
CONFIG_PC300TOO=y
CONFIG_N2=y
# CONFIG_C101 is not set
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
# CONFIG_DSCC4_PCISYNC is not set
# CONFIG_DSCC4_PCI_RST is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_LAPBETHER=y
CONFIG_X25_ASY=y
# CONFIG_SBNI is not set
CONFIG_VMXNET3=m
CONFIG_FUJITSU_ES=m
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
# CONFIG_ISDN_PPP is not set
CONFIG_ISDN_AUDIO=y
# CONFIG_ISDN_TTY_FAX is not set
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
# CONFIG_ISDN_DIVERSION is not set

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
# CONFIG_HISAX_EURO is not set
CONFIG_HISAX_1TR6=y
# CONFIG_HISAX_NI1 is not set
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
# CONFIG_HISAX_16_3 is not set
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
# CONFIG_HISAX_AVM_A1 is not set
CONFIG_HISAX_FRITZPCI=y
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
# CONFIG_HISAX_SPORTSTER is not set
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
# CONFIG_HISAX_NICCY is not set
CONFIG_HISAX_ISURF=y
# CONFIG_HISAX_HSTSAPHIR is not set
# CONFIG_HISAX_BKM_A4T is not set
# CONFIG_HISAX_SCT_QUADRO is not set
# CONFIG_HISAX_GAZEL is not set
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y

#
# HiSax PCMCIA card service modules
#
# CONFIG_HISAX_SEDLBAUER_CS is not set
CONFIG_HISAX_ELSA_CS=m
# CONFIG_HISAX_AVM_A1_CS is not set

#
# HiSax sub driver modules
#
# CONFIG_HISAX_ST5481 is not set
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
# CONFIG_ISDN_CAPI is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_I4L=y
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
# CONFIG_GIGASET_M105 is not set
CONFIG_GIGASET_M101=m
CONFIG_GIGASET_DEBUG=y
# CONFIG_HYSDN is not set
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
# CONFIG_MISDN_HFCUSB is not set
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
# CONFIG_MISDN_INFINEON is not set
CONFIG_MISDN_W6692=m
# CONFIG_MISDN_NETJET is not set
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_KEYBOARD_CAP11XX=y
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
CONFIG_MOUSE_PS2_BYD=y
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_CYPRESS is not set
CONFIG_MOUSE_PS2_LIFEBOOK=y
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_PS2_FOCALTECH is not set
# CONFIG_MOUSE_PS2_VMMOUSE is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_BCM5974=y
# CONFIG_MOUSE_CYAPA is not set
CONFIG_MOUSE_ELAN_I2C=m
# CONFIG_MOUSE_ELAN_I2C_I2C is not set
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
# CONFIG_MOUSE_INPORT is not set
CONFIG_MOUSE_LOGIBM=y
CONFIG_MOUSE_PC110PAD=y
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=y
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=m
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=y
CONFIG_RMI4_2D_SENSOR=y
# CONFIG_RMI4_F11 is not set
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=m
CONFIG_HYPERV_KEYBOARD=m
CONFIG_USERIO=m
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y
CONFIG_N_GSM=y
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_PNP is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_MID=m
CONFIG_SERIAL_8250_MOXA=y
# CONFIG_SERIAL_OF_PLATFORM is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_KGDB_NMI=y
CONFIG_SERIAL_MAX3100=y
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_UARTLITE=y
# CONFIG_SERIAL_UARTLITE_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
CONFIG_SERIAL_SC16IS7XX=m
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
# CONFIG_SERIAL_SC16IS7XX_SPI is not set
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_IFX6X60=y
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_MVEBU_UART=y
# CONFIG_SERIAL_MVEBU_CONSOLE is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=m
CONFIG_DTLK=m
# CONFIG_R3964 is not set
CONFIG_APPLICOM=y
CONFIG_SONYPI=y

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
CONFIG_CARDMAN_4040=y
CONFIG_IPWIRELESS=y
CONFIG_MWAVE=m
# CONFIG_SCx200_GPIO is not set
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
# CONFIG_TCG_TIS is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
CONFIG_TCG_CRB=m
CONFIG_TCG_TIS_ST33ZP24=m
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
CONFIG_TCG_TIS_ST33ZP24_SPI=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_DEMUX_PINCTRL=m
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
CONFIG_I2C_SCMI=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_PCI=m
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_EMEV2=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_PCI=y
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
# CONFIG_I2C_VIPERBOARD is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_CROS_EC_TUNNEL is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_AXI_SPI_ENGINE=m
CONFIG_SPI_BITBANG=y
CONFIG_SPI_CADENCE=m
CONFIG_SPI_DESIGNWARE=m
CONFIG_SPI_DW_PCI=m
CONFIG_SPI_DW_MID_DMA=y
CONFIG_SPI_DW_MMIO=m
CONFIG_SPI_GPIO=y
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_TOPCLIFF_PCH=y
CONFIG_SPI_XCOMM=y
CONFIG_SPI_XILINX=m
CONFIG_SPI_ZYNQMP_GQSPI=y

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=m
# CONFIG_SPMI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
# CONFIG_HSI_CHAR is not set

#
# PPS support
#
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_GPIO=y

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
# CONFIG_DP83640_PHY is not set
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_BROXTON=y
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_LYNXPOINT is not set
# CONFIG_GPIO_MENZ127 is not set
CONFIG_GPIO_SYSCON=m
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_ZX=y

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=m
CONFIG_GPIO_104_IDIO_16=m
CONFIG_GPIO_104_IDI_48=y
# CONFIG_GPIO_F7188X is not set
CONFIG_GPIO_IT87=y
CONFIG_GPIO_SCH=y
CONFIG_GPIO_SCH311X=m
# CONFIG_GPIO_WS16C48 is not set

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
# CONFIG_GPIO_ADNP is not set
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=m
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TPIC2810=y

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_CS5535=y
# CONFIG_GPIO_RC5T583 is not set
CONFIG_GPIO_TIMBERDALE=y
# CONFIG_GPIO_TPS65218 is not set
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8994=y

#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_INTEL_MID=y
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCH=y
# CONFIG_GPIO_RDC321X is not set
# CONFIG_GPIO_SODAVILLE is not set

#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=m
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=m
CONFIG_GPIO_PISOSR=m

#
# SPI or I2C GPIO expanders
#
CONFIG_GPIO_MCP23S08=m

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2406=m
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_MAX8925_POWER=m
CONFIG_WM831X_BACKUP=m
# CONFIG_WM831X_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=m
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
CONFIG_BATTERY_DA9150=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_ISP1704=y
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=y
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_MAX14577=m
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
CONFIG_CHARGER_TPS65090=m
CONFIG_CHARGER_TPS65217=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=m
# CONFIG_POWER_RESET is not set
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=y
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_MC13783_ADC is not set
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_I5500=y
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_POWR1220=m
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=y
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=y
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MAX31790=y
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_MENF21BMC_HWMON=m
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=m
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=y
# CONFIG_PMBUS is not set
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_ADS7871=m
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=m
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=m
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=y
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM831X is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CPU_THERMAL is not set
CONFIG_CLOCK_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_INTEL_POWERCLAMP=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
CONFIG_INTEL_SOC_DTS_THERMAL=y
# CONFIG_INT340X_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=m
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_ATMEL_FLEXCOM is not set
CONFIG_MFD_ATMEL_HLCDC=m
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_CROS_EC=m
CONFIG_MFD_CROS_EC_I2C=m
CONFIG_MFD_CROS_EC_SPI=m
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_DA9062=m
CONFIG_MFD_DA9063=m
CONFIG_MFD_DA9150=y
# CONFIG_MFD_DLN2 is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_MFD_HI6421_PMIC=m
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=m
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_MAX14577=y
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=m
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=m
CONFIG_EZX_PCAP=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_RETU=m
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
CONFIG_MFD_RDC321X=m
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RTSX_USB is not set
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=m
# CONFIG_MFD_RN5T618 is not set
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
# CONFIG_MFD_TPS65086 is not set
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
CONFIG_MFD_TIMBERDALE=m
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_ARIZONA_SPI=y
# CONFIG_MFD_CS47L24 is not set
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
# CONFIG_MFD_WM8998 is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PM800=y
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_ACT8945A is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=m
CONFIG_REGULATOR_ARIZONA=m
CONFIG_REGULATOR_AS3711=m
# CONFIG_REGULATOR_DA9062 is not set
CONFIG_REGULATOR_DA9063=m
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=m
CONFIG_REGULATOR_ISL9305=m
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not set
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LTC3589=m
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=y
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8907=m
# CONFIG_REGULATOR_MAX8925 is not set
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX8973=m
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX8998 is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_PCAP=m
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=m
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_RK808=m
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_S2MPA01=m
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65090=m
CONFIG_REGULATOR_TPS65217=m
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS6524X=y
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TPS80031 is not set
# CONFIG_REGULATOR_WM831X is not set
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
# CONFIG_TTPCI_EEPROM is not set

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Analog TV USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
CONFIG_VIDEO_HDPVR=m
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_VIDEO_STK1160_COMMON is not set
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m

#
# Analog/digital TV USB devices
#

#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not set
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture/analog TV support
#
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DT3155=m

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
# CONFIG_VIDEO_SAA7134 is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SI470X=y
# CONFIG_USB_SI470X is not set
CONFIG_I2C_SI470X=m
CONFIG_RADIO_SI4713=m
# CONFIG_USB_SI4713 is not set
# CONFIG_PLATFORM_SI4713 is not set
CONFIG_I2C_SI4713=m
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
CONFIG_USB_RAREMONO=m
CONFIG_USB_MA901=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_TIMBERDALE=m
CONFIG_RADIO_WL1273=m

#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_RADIO_WL128X=m
# CONFIG_V4L_RADIO_ISA_DRIVERS is not set
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_SONY_BTF_MPX=m

#
# RDS decoders
#

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m

#
# Video and audio decoders
#

#
# Video encoders
#

#
# Camera sensor devices
#
CONFIG_VIDEO_OV7640=m

#
# Flash devices
#

#
# Video improvement chips
#

#
# Audio/Video compression chips
#

#
# Miscellaneous helper chips
#

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MC44S803=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=m
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_INTEL_GTT=y
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_ADV7511=y
# CONFIG_DRM_I2C_CH7006 is not set
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=m
# CONFIG_DRM_AMDGPU_CIK is not set
CONFIG_DRM_AMDGPU_USERPTR=y
# CONFIG_DRM_AMD_POWERPLAY is not set

#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_DRM_NOUVEAU_BACKLIGHT is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT=y
CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_MGA=m
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=y
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
CONFIG_DRM_UDL=y
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_QXL=y
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_PANEL_SIMPLE=y
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
CONFIG_DRM_PANEL_LG_LG4573=y
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
CONFIG_DRM_NXP_PTN3460=m
# CONFIG_DRM_PARADE_PS8622 is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_CYBER2000_DDC is not set
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=m
CONFIG_FB_OPENCORES=m
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=m
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_FB_MATROX_G is not set
# CONFIG_FB_MATROX_I2C is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=y
CONFIG_FB_VIA_DIRECT_PROCFS=y
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
# CONFIG_FB_CARMINE_DRAM_EVAL is not set
CONFIG_CARMINE_DRAM_CUSTOM=y
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=m
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=y
CONFIG_FB_AUO_K190X=y
# CONFIG_FB_AUO_K1900 is not set
# CONFIG_FB_AUO_K1901 is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
CONFIG_FB_SM712=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_L4F00242T03=m
# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=m
# CONFIG_LCD_ILI922X is not set
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_S6E63M0 is not set
CONFIG_LCD_LD9040=m
CONFIG_LCD_AMS369FG06=m
CONFIG_LCD_LMS501KF03=m
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_CARILLO_RANCH=m
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_MAX8925 is not set
CONFIG_BACKLIGHT_APPLE=m
CONFIG_BACKLIGHT_PM8941_WLED=y
CONFIG_BACKLIGHT_SAHARA=m
# CONFIG_BACKLIGHT_WM831X is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_AAT2870=m
CONFIG_BACKLIGHT_LM3630A=y
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=y
# CONFIG_BACKLIGHT_OT200 is not set
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_AS3711=y
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=y
CONFIG_VGASTATE=y
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_PCM_OSS_PLUGINS is not set
# CONFIG_SND_PCM_TIMER is not set
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
CONFIG_SND_ALOOP=m
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_WSS_LIB=y
CONFIG_SND_SB_COMMON=y
CONFIG_SND_SB8_DSP=y
CONFIG_SND_SB16_DSP=y
CONFIG_SND_ISA=y
CONFIG_SND_ADLIB=y
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
# CONFIG_SND_ALS100 is not set
CONFIG_SND_AZT1605=m
CONFIG_SND_AZT2316=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8328=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4236=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=y
CONFIG_SND_SC6000=m
CONFIG_SND_GUSCLASSIC=m
# CONFIG_SND_GUSEXTREME is not set
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=y
# CONFIG_SND_INTERWAVE_STB is not set
CONFIG_SND_JAZZ16=m
# CONFIG_SND_OPL3SA2 is not set
CONFIG_SND_OPTI92X_AD1848=m
# CONFIG_SND_OPTI92X_CS4231 is not set
CONFIG_SND_OPTI93X=y
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=y
CONFIG_SND_SB16=y
CONFIG_SND_SBAWE=y
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SSCAPE=y
# CONFIG_SND_WAVEFRONT is not set
CONFIG_SND_MSND_PINNACLE=y
CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
CONFIG_SND_ALS4000=m
CONFIG_SND_ASIHPI=y
# CONFIG_SND_ATIIXP is not set
CONFIG_SND_ATIIXP_MODEM=m
# CONFIG_SND_AU8810 is not set
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_BT87X=m
CONFIG_SND_BT87X_OVERCLOCK=y
# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=y
CONFIG_SND_CS46XX=m
# CONFIG_SND_CS46XX_NEW_DSP is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_CTXFI=y
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
# CONFIG_SND_LAYLA20 is not set
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=y
CONFIG_SND_LAYLA24=m
# CONFIG_SND_MONA is not set
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
CONFIG_SND_INDIGODJX=y
CONFIG_SND_ENS1370=y
# CONFIG_SND_ENS1371 is not set
CONFIG_SND_FM801=y
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
CONFIG_SND_RIPTIDE=y
CONFIG_SND_RME32=m
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=y
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_HDMI is not set
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
# CONFIG_SND_HDA_CODEC_CA0132 is not set
CONFIG_SND_HDA_CODEC_CMEDIA=m
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_EXT_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=y
# CONFIG_SND_USB_CAIAQ_INPUT is not set
CONFIG_SND_USB_US122L=y
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
CONFIG_SND_USB_LINE6=y
CONFIG_SND_USB_POD=y
CONFIG_SND_USB_PODHD=y
CONFIG_SND_USB_TONEPORT=y
CONFIG_SND_USB_VARIAX=m
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=y
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_AMD_ACP=m
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_DESIGNWARE_I2S is not set

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=m
# CONFIG_SND_SOC_FSL_SAI is not set
# CONFIG_SND_SOC_FSL_SSI is not set
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_ESAI=m
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SST_MFLD_PLATFORM=m
CONFIG_SND_SST_IPC=m
CONFIG_SND_SST_IPC_ACPI=m
CONFIG_SND_SOC_INTEL_SST=m
CONFIG_SND_SOC_INTEL_SST_ACPI=m
CONFIG_SND_SOC_INTEL_SST_MATCH=m
CONFIG_SND_SOC_INTEL_HASWELL=m
CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
CONFIG_SND_SOC_INTEL_SKYLAKE=m
CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m
# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH is not set

#
# Allwinner SoC Audio support
#
# CONFIG_SND_SUN4I_CODEC is not set
CONFIG_SND_SUN4I_SPDIF=m
CONFIG_SND_SOC_XTFPGA_I2S=m
CONFIG_SND_SOC_I2C_AND_SPI=m

#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_CS35L32=m
# CONFIG_SND_SOC_CS42L51_I2C is not set
CONFIG_SND_SOC_CS42L52=m
# CONFIG_SND_SOC_CS42L56 is not set
CONFIG_SND_SOC_CS42L73=m
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
# CONFIG_SND_SOC_CS4349 is not set
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_HDAC_HDMI=m
# CONFIG_SND_SOC_INNO_RK3036 is not set
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM179X=m
# CONFIG_SND_SOC_PCM179X_I2C is not set
CONFIG_SND_SOC_PCM179X_SPI=m
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
# CONFIG_SND_SOC_PCM3168A_SPI is not set
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
# CONFIG_SND_SOC_PCM512x_SPI is not set
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RL6347A=m
CONFIG_SND_SOC_RT286=m
CONFIG_SND_SOC_RT5616=m
CONFIG_SND_SOC_RT5631=m
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5651=m
CONFIG_SND_SOC_RT5670=m
# CONFIG_SND_SOC_RT5677_SPI is not set
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_SSM2602_SPI=m
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
CONFIG_SND_SOC_STI_SAS=m
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS5086 is not set
CONFIG_SND_SOC_TAS571X=m
CONFIG_SND_SOC_TFA9879=m
CONFIG_SND_SOC_TLV320AIC23=m
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
CONFIG_SND_SOC_TLV320AIC23_SPI=m
CONFIG_SND_SOC_TLV320AIC31XX=m
# CONFIG_SND_SOC_TLV320AIC3X is not set
CONFIG_SND_SOC_TS3A227E=m
CONFIG_SND_SOC_WM8510=m
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8580 is not set
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
# CONFIG_SND_SOC_WM8770 is not set
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8804=m
# CONFIG_SND_SOC_WM8804_I2C is not set
CONFIG_SND_SOC_WM8804_SPI=m
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8962 is not set
CONFIG_SND_SOC_WM8974=m
# CONFIG_SND_SOC_WM8978 is not set
CONFIG_SND_SOC_NAU8825=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SIMPLE_CARD=m
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y

#
# HID support
#
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
CONFIG_UHID=m
# CONFIG_HID_GENERIC is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_AUREAL=m
# CONFIG_HID_BELKIN is not set
CONFIG_HID_BETOP_FF=m
CONFIG_HID_CHERRY=m
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CORSAIR=m
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CMEDIA=m
CONFIG_HID_CP2112=m
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LENOVO=m
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
# CONFIG_HID_PICOLCD_FB is not set
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=m
# CONFIG_HID_THINGM is not set
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m

#
# USB HID support
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=y
CONFIG_USB_MOUSE=m

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_ULPI_BUS=m
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=m
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_FOTG210_HCD=y
CONFIG_USB_MAX3421_HCD=m
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=m
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_HCD_BCMA=m
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_HOST=y

#
# Platform Glue Driver Support
#
# CONFIG_USB_DWC3_PCI is not set
CONFIG_USB_DWC3_OF_SIMPLE=y
# CONFIG_USB_DWC2 is not set
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_OF=y
CONFIG_USB_CHIPIDEA_PCI=m
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760_HOST_ROLE=y

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=y
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HSIC_USB3503=m
CONFIG_USB_LINK_LAYER_TEST=y
# CONFIG_USB_CHAOSKEY is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_CXACRU is not set
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
CONFIG_USB_GPIO_VBUS=m
# CONFIG_TAHVO_USB is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
CONFIG_USB_LED_TRIG=y
CONFIG_UWB=y
# CONFIG_UWB_HWA is not set
CONFIG_UWB_WHCI=y
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=y
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_TOSHIBA_PCI=y
CONFIG_MMC_MTK=y
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set
CONFIG_MS_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y

#
# LED drivers
#
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_BCM6328=m
# CONFIG_LEDS_BCM6358 is not set
CONFIG_LEDS_LM3530=y
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
CONFIG_LEDS_LP8860=y
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=m
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_INTEL_SS4200=y
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_MC13783 is not set
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=m
# CONFIG_LEDS_MAX8997 is not set
CONFIG_LEDS_LM355x=m
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_MENF21BMC is not set
CONFIG_LEDS_KTD2692=m
CONFIG_LEDS_IS31FL32XX=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_SYSCON=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
CONFIG_FSL_EDMA=y
CONFIG_INTEL_IDMA64=m
CONFIG_PCH_DMA=m
CONFIG_TIMB_DMA=m
CONFIG_QCOM_HIDMA_MGMT=y
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=m
CONFIG_HSU_DMA=m

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=m
CONFIG_UIO_PRUSS=m
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI=m
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
CONFIG_IRQ_BYPASS_MANAGER=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_BALLOON=m
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
# CONFIG_ACERHDF is not set
CONFIG_ALIENWARE_WMI=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_WMI_AIO=m
CONFIG_DELL_SMO8800=m
CONFIG_DELL_RBTN=m
CONFIG_FUJITSU_LAPTOP=y
CONFIG_FUJITSU_LAPTOP_DEBUG=y
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
CONFIG_TC1100_WMI=m
CONFIG_HP_ACCEL=m
CONFIG_HP_WIRELESS=m
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
CONFIG_PANASONIC_LAPTOP=m
# CONFIG_COMPAL_LAPTOP is not set
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
CONFIG_THINKPAD_ACPI_DEBUG=y
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
# CONFIG_THINKPAD_ACPI_VIDEO is not set
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
# CONFIG_TOPSTAR_LAPTOP is not set
CONFIG_ACPI_TOSHIBA=m
# CONFIG_TOSHIBA_BT_RFKILL is not set
CONFIG_TOSHIBA_HAPS=y
CONFIG_TOSHIBA_WMI=m
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_HID_EVENT=m
CONFIG_INTEL_IPS=m
CONFIG_IBM_RTL=y
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
# CONFIG_INTEL_OAKTRAIL is not set
CONFIG_SAMSUNG_Q10=y
CONFIG_APPLE_GMUX=m
CONFIG_INTEL_RST=m
CONFIG_INTEL_SMARTCONNECT=y
CONFIG_PVPANIC=y
# CONFIG_INTEL_PMC_IPC is not set
CONFIG_SURFACE_PRO3_BUTTON=m
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CHROMEOS_LAPTOP is not set
# CONFIG_CHROMEOS_PSTORE is not set
# CONFIG_CROS_EC_CHARDEV is not set
# CONFIG_CROS_EC_LPC is not set
CONFIG_CROS_EC_PROTO=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_WM831X is not set
# CONFIG_COMMON_CLK_RK808 is not set
CONFIG_COMMON_CLK_SI5351=m
# CONFIG_COMMON_CLK_SI514 is not set
CONFIG_COMMON_CLK_SI570=m
CONFIG_COMMON_CLK_CDCE706=y
# CONFIG_COMMON_CLK_CDCE925 is not set
CONFIG_COMMON_CLK_CS2000_CP=m
CONFIG_COMMON_CLK_S2MPS11=m
# CONFIG_COMMON_CLK_NXP is not set
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_PXA is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_OF_IOMMU=y
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=m
CONFIG_STE_MODEM_RPROC=m

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SUNXI_SRAM is not set
CONFIG_SOC_TI=y
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ARIZONA is not set
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX3355=y
# CONFIG_EXTCON_MAX8997 is not set
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=y
# CONFIG_EXTCON_USB_GPIO is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=y
# CONFIG_NTB_PINGPONG is not set
CONFIG_NTB_TOOL=m
CONFIG_NTB_PERF=y
CONFIG_NTB_TRANSPORT=m
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_ATMEL_HLCDC_PWM=m
CONFIG_PWM_FSL_FTM=m
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_PCA9685 is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=m
CONFIG_SERIAL_IPOCTAL=m
CONFIG_RESET_CONTROLLER=y
CONFIG_FMC=y
# CONFIG_FMC_FAKEDEV is not set
CONFIG_FMC_TRIVIAL=y
# CONFIG_FMC_WRITE_EEPROM is not set
CONFIG_FMC_CHARDEV=m

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=m
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_TUSB1210 is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=m
CONFIG_MCB=y
# CONFIG_MCB_PCI is not set

#
# Performance monitor support
#
CONFIG_RAS=y
CONFIG_THUNDERBOLT=y

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
CONFIG_NVMEM=y
# CONFIG_STM is not set
CONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_PCI is not set
CONFIG_INTEL_TH_GTH=y
# CONFIG_INTEL_TH_MSU is not set
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=y

#
# FPGA Configuration Support
#
CONFIG_FPGA=y
CONFIG_FPGA_MGR_ZYNQ_FPGA=m

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=m
CONFIG_EXT4_FS_ENCRYPTION=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
CONFIG_NILFS2_FS=y
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=m
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_OVERLAY_FS=m

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_HFSPLUS_FS_POSIX_ACL=y
# CONFIG_BEFS_FS is not set
CONFIG_BFS_FS=y
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=y
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_QNX6FS_FS=m
# CONFIG_QNX6FS_DEBUG is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
CONFIG_PSTORE_PMSG=y
CONFIG_PSTORE_RAM=m
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
# CONFIG_EXOFS_DEBUG is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
# CONFIG_NFS_V4_2 is not set
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_V4 is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_CEPH_FS=y
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_ACL is not set
# CONFIG_CIFS_DEBUG is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_SMB311 is not set
CONFIG_CIFS_FSCACHE=y
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=m
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
CONFIG_SCHED_STACK_END_CHECK=y
# CONFIG_DEBUG_TIMEKEEPING is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT=y
CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT_DELAY=3
CONFIG_RCU_TORTURE_TEST_SLOW_INIT=y
CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP=y
CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY=3
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_EQS_DEBUG=y
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAIL_IO_TIMEOUT is not set
CONFIG_FAIL_MMC_REQUEST=y
# CONFIG_FAIL_FUTEX is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_PROFILE_ALL_BRANCHES=y
# CONFIG_BRANCH_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_EVENT_TRACE_TEST_SYSCALLS is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
CONFIG_RING_BUFFER_STARTUP_TEST=y
# CONFIG_TRACE_ENUM_MAP_FILE is not set
# CONFIG_TRACING_EVENTS_GPIO is not set

#
# Runtime Testing
#
CONFIG_LKDTM=y
CONFIG_TEST_LIST_SORT=y
CONFIG_BACKTRACE_SELF_TEST=m
CONFIG_RBTREE_TEST=y
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=y
CONFIG_TEST_RHASHTABLE=m
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_DMA_API_DEBUG=y
# CONFIG_TEST_LKM is not set
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_MEMTEST=y
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=m
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"
CONFIG_KGDB_LOW_LEVEL_TRAP=y
# CONFIG_KGDB_KDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_WX is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
CONFIG_DEBUG_TLBFLUSH=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_DEBUG_ENTRY=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
CONFIG_PUNIT_ATOM_DEBUG=m

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
CONFIG_TRUSTED_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
# CONFIG_SECURITY_APPARMOR is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="tomoyo"
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=m
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=m
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_CHACHA20=m
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_586=m
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_842=m
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=y
CONFIG_CRYPTO_DEV_HIFN_795X=y
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
# CONFIG_CRYPTO_DEV_CCP is not set
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=y
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_LGUEST is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=m
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=y
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
# CONFIG_FONT_6x10 is not set
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_10x18=y
# CONFIG_SG_SPLIT is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Ingo Molnar]

* Michal Hocko <mhocko@kernel.org> wrote:

> On Wed 13-04-16 11:08:30, Ingo Molnar wrote:
> > 
> > * Michal Hocko <mhocko@kernel.org> wrote:
> [...]
> > > +ENTRY(call_rwsem_down_write_failed_killable)
> > > +	save_common_regs
> > > +	movq %rax,%rdi
> > > +	call rwsem_down_write_failed_killable
> > > +	restore_common_regs
> > > +	ret
> > > +ENDPROC(call_rwsem_down_write_failed_killable)
> > 
> > Got this objtool warning on x86-64 allyesconfig:
> > 
> >   arch/x86/lib/rwsem.o: warning: objtool: call_rwsem_down_write_failed_killable()+0xe: call without frame pointer save/setup
> 
> Peter has already pointed that out. This is because the 4.5 which I was
> basing my work on doesn't have 3387a535ce62 ("x86/asm: Create stack
> frames in rwsem functions") which shown up in 4.6-rc1. He mentioned to
> add the missing FRAME_{BEGIN,END} during the merge AFAIR.
> 
> Does that sound reasonable to you or should I rebase?

I'm testing your patches today, if they are otherwise OK then please send a delta 
patch against the tip:locking/rwsem tree I'll push out.

Thanks,

	Ingo

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Ingo Molnar]

* Michal Hocko <mhocko@kernel.org> wrote:

> On Wed 13-04-16 11:08:30, Ingo Molnar wrote:
> > 
> > * Michal Hocko <mhocko@kernel.org> wrote:
> [...]
> > > +ENTRY(call_rwsem_down_write_failed_killable)
> > > +	save_common_regs
> > > +	movq %rax,%rdi
> > > +	call rwsem_down_write_failed_killable
> > > +	restore_common_regs
> > > +	ret
> > > +ENDPROC(call_rwsem_down_write_failed_killable)
> > 
> > Got this objtool warning on x86-64 allyesconfig:
> > 
> >   arch/x86/lib/rwsem.o: warning: objtool: call_rwsem_down_write_failed_killable()+0xe: call without frame pointer save/setup
> 
> Peter has already pointed that out. This is because the 4.5 which I was
> basing my work on doesn't have 3387a535ce62 ("x86/asm: Create stack
> frames in rwsem functions") which shown up in 4.6-rc1. He mentioned to
> add the missing FRAME_{BEGIN,END} during the merge AFAIR.
> 
> Does that sound reasonable to you or should I rebase?

I'm testing your patches today, if they are otherwise OK then please send a delta 
patch against the tip:locking/rwsem tree I'll push out.

Thanks,

	Ingo

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

On Wed 13-04-16 11:08:30, Ingo Molnar wrote:
> 
> * Michal Hocko <mhocko@kernel.org> wrote:
[...]
> > +ENTRY(call_rwsem_down_write_failed_killable)
> > +	save_common_regs
> > +	movq %rax,%rdi
> > +	call rwsem_down_write_failed_killable
> > +	restore_common_regs
> > +	ret
> > +ENDPROC(call_rwsem_down_write_failed_killable)
> 
> Got this objtool warning on x86-64 allyesconfig:
> 
>   arch/x86/lib/rwsem.o: warning: objtool: call_rwsem_down_write_failed_killable()+0xe: call without frame pointer save/setup

Peter has already pointed that out. This is because the 4.5 which I was
basing my work on doesn't have 3387a535ce62 ("x86/asm: Create stack
frames in rwsem functions") which shown up in 4.6-rc1. He mentioned to
add the missing FRAME_{BEGIN,END} during the merge AFAIR.

Does that sound reasonable to you or should I rebase?

-- 
Michal Hocko
SUSE Labs

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

On Wed 13-04-16 11:08:30, Ingo Molnar wrote:
> 
> * Michal Hocko <mhocko@kernel.org> wrote:
[...]
> > +ENTRY(call_rwsem_down_write_failed_killable)
> > +	save_common_regs
> > +	movq %rax,%rdi
> > +	call rwsem_down_write_failed_killable
> > +	restore_common_regs
> > +	ret
> > +ENDPROC(call_rwsem_down_write_failed_killable)
> 
> Got this objtool warning on x86-64 allyesconfig:
> 
>   arch/x86/lib/rwsem.o: warning: objtool: call_rwsem_down_write_failed_killable()+0xe: call without frame pointer save/setup

Peter has already pointed that out. This is because the 4.5 which I was
basing my work on doesn't have 3387a535ce62 ("x86/asm: Create stack
frames in rwsem functions") which shown up in 4.6-rc1. He mentioned to
add the missing FRAME_{BEGIN,END} during the merge AFAIR.

Does that sound reasonable to you or should I rebase?

-- 
Michal Hocko
SUSE Labs

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Ingo Molnar]

* Michal Hocko <mhocko@kernel.org> wrote:

> From: Michal Hocko <mhocko@suse.com>
> 
> which uses the same fast path as __down_write except it falls back to
> call_rwsem_down_write_failed_killable slow path and return -EINTR if
> killed. To prevent from code duplication extract the skeleton of
> __down_write into a helper macro which just takes the semaphore
> and the slow path function to be called.
> 
> Signed-off-by: Michal Hocko <mhocko@suse.com>
> ---
>  arch/x86/include/asm/rwsem.h | 41 ++++++++++++++++++++++++++++-------------
>  arch/x86/lib/rwsem.S         |  8 ++++++++
>  2 files changed, 36 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
> index d79a218675bc..4c3d90dbe89a 100644
> --- a/arch/x86/include/asm/rwsem.h
> +++ b/arch/x86/include/asm/rwsem.h
> @@ -99,21 +99,36 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
>  /*
>   * lock for writing
>   */
> +#define ____down_write(sem, slow_path)			\
> +({							\
> +	long tmp;					\
> +	struct rw_semaphore* ret = sem;			\
> +	asm volatile("# beginning down_write\n\t"	\
> +		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"	\
> +		     /* adds 0xffff0001, returns the old value */ \
> +		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t" \
> +		     /* was the active mask 0 before? */\
> +		     "  jz        1f\n"			\
> +		     "  call " slow_path "\n"		\
> +		     "1:\n"				\
> +		     "# ending down_write"		\
> +		     : "+m" (sem->count), "=d" (tmp), "+a" (ret)	\
> +		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS) \
> +		     : "memory", "cc");			\
> +	ret;						\
> +})
> +
>  static inline void __down_write(struct rw_semaphore *sem)
>  {
> -	long tmp;
> -	asm volatile("# beginning down_write\n\t"
> -		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"
> -		     /* adds 0xffff0001, returns the old value */
> -		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t"
> -		     /* was the active mask 0 before? */
> -		     "  jz        1f\n"
> -		     "  call call_rwsem_down_write_failed\n"
> -		     "1:\n"
> -		     "# ending down_write"
> -		     : "+m" (sem->count), "=d" (tmp)
> -		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS)
> -		     : "memory", "cc");
> +	____down_write(sem, "call_rwsem_down_write_failed");
> +}
> +
> +static inline int __down_write_killable(struct rw_semaphore *sem)
> +{
> +	if (IS_ERR(____down_write(sem, "call_rwsem_down_write_failed_killable")))
> +		return -EINTR;
> +
> +	return 0;
>  }
>  
>  /*
> diff --git a/arch/x86/lib/rwsem.S b/arch/x86/lib/rwsem.S
> index 40027db99140..d1a1397e1fb3 100644
> --- a/arch/x86/lib/rwsem.S
> +++ b/arch/x86/lib/rwsem.S
> @@ -101,6 +101,14 @@ ENTRY(call_rwsem_down_write_failed)
>  	ret
>  ENDPROC(call_rwsem_down_write_failed)
>  
> +ENTRY(call_rwsem_down_write_failed_killable)
> +	save_common_regs
> +	movq %rax,%rdi
> +	call rwsem_down_write_failed_killable
> +	restore_common_regs
> +	ret
> +ENDPROC(call_rwsem_down_write_failed_killable)

Got this objtool warning on x86-64 allyesconfig:

  arch/x86/lib/rwsem.o: warning: objtool: call_rwsem_down_write_failed_killable()+0xe: call without frame pointer save/setup

Thanks,

	Ingo

[PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

which uses the same fast path as __down_write except it falls back to
call_rwsem_down_write_failed_killable slow path and return -EINTR if
killed. To prevent from code duplication extract the skeleton of
__down_write into a helper macro which just takes the semaphore
and the slow path function to be called.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/x86/include/asm/rwsem.h | 41 ++++++++++++++++++++++++++++-------------
 arch/x86/lib/rwsem.S         |  8 ++++++++
 2 files changed, 36 insertions(+), 13 deletions(-)

diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
index d79a218675bc..4c3d90dbe89a 100644
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -99,21 +99,36 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * lock for writing
  */
+#define ____down_write(sem, slow_path)			\
+({							\
+	long tmp;					\
+	struct rw_semaphore* ret = sem;			\
+	asm volatile("# beginning down_write\n\t"	\
+		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"	\
+		     /* adds 0xffff0001, returns the old value */ \
+		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t" \
+		     /* was the active mask 0 before? */\
+		     "  jz        1f\n"			\
+		     "  call " slow_path "\n"		\
+		     "1:\n"				\
+		     "# ending down_write"		\
+		     : "+m" (sem->count), "=d" (tmp), "+a" (ret)	\
+		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS) \
+		     : "memory", "cc");			\
+	ret;						\
+})
+
 static inline void __down_write(struct rw_semaphore *sem)
 {
-	long tmp;
-	asm volatile("# beginning down_write\n\t"
-		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"
-		     /* adds 0xffff0001, returns the old value */
-		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t"
-		     /* was the active mask 0 before? */
-		     "  jz        1f\n"
-		     "  call call_rwsem_down_write_failed\n"
-		     "1:\n"
-		     "# ending down_write"
-		     : "+m" (sem->count), "=d" (tmp)
-		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS)
-		     : "memory", "cc");
+	____down_write(sem, "call_rwsem_down_write_failed");
+}
+
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	if (IS_ERR(____down_write(sem, "call_rwsem_down_write_failed_killable")))
+		return -EINTR;
+
+	return 0;
 }
 
 /*
diff --git a/arch/x86/lib/rwsem.S b/arch/x86/lib/rwsem.S
index 40027db99140..d1a1397e1fb3 100644
--- a/arch/x86/lib/rwsem.S
+++ b/arch/x86/lib/rwsem.S
@@ -101,6 +101,14 @@ ENTRY(call_rwsem_down_write_failed)
 	ret
 ENDPROC(call_rwsem_down_write_failed)
 
+ENTRY(call_rwsem_down_write_failed_killable)
+	save_common_regs
+	movq %rax,%rdi
+	call rwsem_down_write_failed_killable
+	restore_common_regs
+	ret
+ENDPROC(call_rwsem_down_write_failed_killable)
+
 ENTRY(call_rwsem_wake)
 	/* do nothing if still outstanding active readers */
 	__ASM_HALF_SIZE(dec) %__ASM_HALF_REG(dx)
-- 
2.8.0.rc3

[PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

which uses the same fast path as __down_write except it falls back to
call_rwsem_down_write_failed_killable slow path and return -EINTR if
killed. To prevent from code duplication extract the skeleton of
__down_write into a helper macro which just takes the semaphore
and the slow path function to be called.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/x86/include/asm/rwsem.h | 41 ++++++++++++++++++++++++++++-------------
 arch/x86/lib/rwsem.S         |  8 ++++++++
 2 files changed, 36 insertions(+), 13 deletions(-)

diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
index d79a218675bc..4c3d90dbe89a 100644
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -99,21 +99,36 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * lock for writing
  */
+#define ____down_write(sem, slow_path)			\
+({							\
+	long tmp;					\
+	struct rw_semaphore* ret = sem;			\
+	asm volatile("# beginning down_write\n\t"	\
+		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"	\
+		     /* adds 0xffff0001, returns the old value */ \
+		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t" \
+		     /* was the active mask 0 before? */\
+		     "  jz        1f\n"			\
+		     "  call " slow_path "\n"		\
+		     "1:\n"				\
+		     "# ending down_write"		\
+		     : "+m" (sem->count), "=d" (tmp), "+a" (ret)	\
+		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS) \
+		     : "memory", "cc");			\
+	ret;						\
+})
+
 static inline void __down_write(struct rw_semaphore *sem)
 {
-	long tmp;
-	asm volatile("# beginning down_write\n\t"
-		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"
-		     /* adds 0xffff0001, returns the old value */
-		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t"
-		     /* was the active mask 0 before? */
-		     "  jz        1f\n"
-		     "  call call_rwsem_down_write_failed\n"
-		     "1:\n"
-		     "# ending down_write"
-		     : "+m" (sem->count), "=d" (tmp)
-		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS)
-		     : "memory", "cc");
+	____down_write(sem, "call_rwsem_down_write_failed");
+}
+
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	if (IS_ERR(____down_write(sem, "call_rwsem_down_write_failed_killable")))
+		return -EINTR;
+
+	return 0;
 }
 
 /*
diff --git a/arch/x86/lib/rwsem.S b/arch/x86/lib/rwsem.S
index 40027db99140..d1a1397e1fb3 100644
--- a/arch/x86/lib/rwsem.S
+++ b/arch/x86/lib/rwsem.S
@@ -101,6 +101,14 @@ ENTRY(call_rwsem_down_write_failed)
 	ret
 ENDPROC(call_rwsem_down_write_failed)
 
+ENTRY(call_rwsem_down_write_failed_killable)
+	save_common_regs
+	movq %rax,%rdi
+	call rwsem_down_write_failed_killable
+	restore_common_regs
+	ret
+ENDPROC(call_rwsem_down_write_failed_killable)
+
 ENTRY(call_rwsem_wake)
 	/* do nothing if still outstanding active readers */
 	__ASM_HALF_SIZE(dec) %__ASM_HALF_REG(dx)
-- 
2.8.0.rc3

Re: [PATCH 10/11] x86, rwsem: provide __down_write_killable

[Peter Zijlstra]

On Fri, Apr 01, 2016 at 01:04:54PM +0200, Michal Hocko wrote:
> diff --git a/arch/x86/lib/rwsem.S b/arch/x86/lib/rwsem.S
> index 40027db99140..d1a1397e1fb3 100644
> --- a/arch/x86/lib/rwsem.S
> +++ b/arch/x86/lib/rwsem.S
> @@ -101,6 +101,14 @@ ENTRY(call_rwsem_down_write_failed)
>  	ret
>  ENDPROC(call_rwsem_down_write_failed)
>  
> +ENTRY(call_rwsem_down_write_failed_killable)
> +	save_common_regs
> +	movq %rax,%rdi
> +	call rwsem_down_write_failed_killable
> +	restore_common_regs
> +	ret
> +ENDPROC(call_rwsem_down_write_failed_killable)
> +

I had a conflict here and made that:

--- a/arch/x86/lib/rwsem.S
+++ b/arch/x86/lib/rwsem.S
@@ -106,6 +106,16 @@ ENTRY(call_rwsem_down_write_failed)
 	ret
 ENDPROC(call_rwsem_down_write_failed)
 
+ENTRY(call_rwsem_down_write_failed_killable)
+	FRAME_BEGIN
+	save_common_regs
+	movq %rax,%rdi
+	call rwsem_down_write_failed_killable
+	restore_common_regs
+	FRAME_END
+	ret
+ENDPROC(call_rwsem_down_write_failed_killable)
+
 ENTRY(call_rwsem_wake)
 	FRAME_BEGIN
 	/* do nothing if still outstanding active readers */

[PATCH 10/11] x86, rwsem: provide __down_write_killable

[Michal Hocko]

From: Michal Hocko <mhocko@suse.com>

which uses the same fast path as __down_write except it falls back to
call_rwsem_down_write_failed_killable slow path and return -EINTR if
killed. To prevent from code duplication extract the skeleton of
__down_write into a helper macro which just takes the semaphore
and the slow path function to be called.

Signed-off-by: Michal Hocko <mhocko@suse.com>
---
 arch/x86/include/asm/rwsem.h | 41 ++++++++++++++++++++++++++++-------------
 arch/x86/lib/rwsem.S         |  8 ++++++++
 2 files changed, 36 insertions(+), 13 deletions(-)

diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
index d79a218675bc..4c3d90dbe89a 100644
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -99,21 +99,36 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 /*
  * lock for writing
  */
+#define ____down_write(sem, slow_path)			\
+({							\
+	long tmp;					\
+	struct rw_semaphore* ret = sem;			\
+	asm volatile("# beginning down_write\n\t"	\
+		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"	\
+		     /* adds 0xffff0001, returns the old value */ \
+		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t" \
+		     /* was the active mask 0 before? */\
+		     "  jz        1f\n"			\
+		     "  call " slow_path "\n"		\
+		     "1:\n"				\
+		     "# ending down_write"		\
+		     : "+m" (sem->count), "=d" (tmp), "+a" (ret)	\
+		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS) \
+		     : "memory", "cc");			\
+	ret;						\
+})
+
 static inline void __down_write(struct rw_semaphore *sem)
 {
-	long tmp;
-	asm volatile("# beginning down_write\n\t"
-		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"
-		     /* adds 0xffff0001, returns the old value */
-		     "  test " __ASM_SEL(%w1,%k1) "," __ASM_SEL(%w1,%k1) "\n\t"
-		     /* was the active mask 0 before? */
-		     "  jz        1f\n"
-		     "  call call_rwsem_down_write_failed\n"
-		     "1:\n"
-		     "# ending down_write"
-		     : "+m" (sem->count), "=d" (tmp)
-		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS)
-		     : "memory", "cc");
+	____down_write(sem, "call_rwsem_down_write_failed");
+}
+
+static inline int __down_write_killable(struct rw_semaphore *sem)
+{
+	if (IS_ERR(____down_write(sem, "call_rwsem_down_write_failed_killable")))
+		return -EINTR;
+
+	return 0;
 }
 
 /*
diff --git a/arch/x86/lib/rwsem.S b/arch/x86/lib/rwsem.S
index 40027db99140..d1a1397e1fb3 100644
--- a/arch/x86/lib/rwsem.S
+++ b/arch/x86/lib/rwsem.S
@@ -101,6 +101,14 @@ ENTRY(call_rwsem_down_write_failed)
 	ret
 ENDPROC(call_rwsem_down_write_failed)
 
+ENTRY(call_rwsem_down_write_failed_killable)
+	save_common_regs
+	movq %rax,%rdi
+	call rwsem_down_write_failed_killable
+	restore_common_regs
+	ret
+ENDPROC(call_rwsem_down_write_failed_killable)
+
 ENTRY(call_rwsem_wake)
 	/* do nothing if still outstanding active readers */
 	__ASM_HALF_SIZE(dec) %__ASM_HALF_REG(dx)
-- 
2.8.0.rc3