From: Yury Norov <ynorov@caviumnetworks.com>
To: arnd@arndb.de, catalin.marinas@arm.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
linux-arch@vger.kernel.org
Cc: schwidefsky@de.ibm.com, heiko.carstens@de.ibm.com,
ynorov@caviumnetworks.com, pinskia@gmail.com, broonie@kernel.org,
joseph@codesourcery.com,
christoph.muellner@theobroma-systems.com,
bamvor.zhangjian@huawei.com, szabolcs.nagy@arm.com,
klimov.linux@gmail.com, Nathan_Lynch@mentor.com, agraf@suse.de,
Prasun.Kapoor@caviumnetworks.com, kilobyte@angband.pl,
geert@linux-m68k.org, philipp.tomsich@theobroma-systems.com,
manuel.montezelo@gmail.com, linyongting@huawei.com,
maxim.kuvyrkov@linaro.org, davem@davemloft.net,
zhouchengming1@huawei.com, cmetcalf@ezchip.com
Subject: [PATCH 14/18] arm64: signal32: move ilp32 and aarch32 common code to separated file
Date: Fri, 21 Oct 2016 23:33:13 +0300 [thread overview]
Message-ID: <1477081997-4770-15-git-send-email-ynorov@caviumnetworks.com> (raw)
Message-ID: <20161021203313.choqKS-cQQZnSFBG9nRFSjTz_vDXWr7I2cPdWXhWhJM@z> (raw)
In-Reply-To: <1477081997-4770-1-git-send-email-ynorov@caviumnetworks.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
---
arch/arm64/include/asm/signal32.h | 3 +
arch/arm64/include/asm/signal32_common.h | 27 +++++++
arch/arm64/kernel/Makefile | 2 +-
arch/arm64/kernel/signal32.c | 107 ------------------------
arch/arm64/kernel/signal32_common.c | 135 +++++++++++++++++++++++++++++++
5 files changed, 166 insertions(+), 108 deletions(-)
create mode 100644 arch/arm64/include/asm/signal32_common.h
create mode 100644 arch/arm64/kernel/signal32_common.c
diff --git a/arch/arm64/include/asm/signal32.h b/arch/arm64/include/asm/signal32.h
index e68fcce..1c4ede7 100644
--- a/arch/arm64/include/asm/signal32.h
+++ b/arch/arm64/include/asm/signal32.h
@@ -13,6 +13,9 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+
+#include <asm/signal32_common.h>
+
#ifndef __ASM_SIGNAL32_H
#define __ASM_SIGNAL32_H
diff --git a/arch/arm64/include/asm/signal32_common.h b/arch/arm64/include/asm/signal32_common.h
new file mode 100644
index 0000000..36c1ebc
--- /dev/null
+++ b/arch/arm64/include/asm/signal32_common.h
@@ -0,0 +1,27 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SIGNAL32_COMMON_H
+#define __ASM_SIGNAL32_COMMON_H
+
+#ifdef CONFIG_COMPAT
+
+int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from);
+int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from);
+
+int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set);
+int get_sigset_t(sigset_t *set, const compat_sigset_t __user *uset);
+
+#endif /* CONFIG_COMPAT*/
+
+#endif /* __ASM_SIGNAL32_COMMON_H */
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 06070f5..fdc0052 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -30,7 +30,7 @@ $(obj)/%.stub.o: $(obj)/%.o FORCE
arm64-obj-$(CONFIG_AARCH32_EL0) += sys32.o kuser32.o signal32.o \
sys_compat.o entry32.o binfmt_elf32.o
arm64-obj-$(CONFIG_ARM64_ILP32) += binfmt_ilp32.o sys_ilp32.o
-arm64-obj-$(CONFIG_COMPAT) += entry32_common.o
+arm64-obj-$(CONFIG_COMPAT) += entry32_common.o signal32_common.o
arm64-obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o
arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o
arm64-obj-$(CONFIG_ARM64_MODULE_PLTS) += module-plts.o
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index b7063de..f2c1a38 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -103,113 +103,6 @@ struct compat_rt_sigframe {
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set)
-{
- compat_sigset_t cset;
-
- cset.sig[0] = set->sig[0] & 0xffffffffull;
- cset.sig[1] = set->sig[0] >> 32;
-
- return copy_to_user(uset, &cset, sizeof(*uset));
-}
-
-static inline int get_sigset_t(sigset_t *set,
- const compat_sigset_t __user *uset)
-{
- compat_sigset_t s32;
-
- if (copy_from_user(&s32, uset, sizeof(*uset)))
- return -EFAULT;
-
- set->sig[0] = s32.sig[0] | (((long)s32.sig[1]) << 32);
- return 0;
-}
-
-int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
-{
- int err;
-
- if (!access_ok(VERIFY_WRITE, to, sizeof(*to)))
- return -EFAULT;
-
- /* If you change siginfo_t structure, please be sure
- * this code is fixed accordingly.
- * It should never copy any pad contained in the structure
- * to avoid security leaks, but must copy the generic
- * 3 ints plus the relevant union member.
- * This routine must convert siginfo from 64bit to 32bit as well
- * at the same time.
- */
- err = __put_user(from->si_signo, &to->si_signo);
- err |= __put_user(from->si_errno, &to->si_errno);
- err |= __put_user((short)from->si_code, &to->si_code);
- if (from->si_code < 0)
- err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad,
- SI_PAD_SIZE);
- else switch (from->si_code & __SI_MASK) {
- case __SI_KILL:
- err |= __put_user(from->si_pid, &to->si_pid);
- err |= __put_user(from->si_uid, &to->si_uid);
- break;
- case __SI_TIMER:
- err |= __put_user(from->si_tid, &to->si_tid);
- err |= __put_user(from->si_overrun, &to->si_overrun);
- err |= __put_user(from->si_int, &to->si_int);
- break;
- case __SI_POLL:
- err |= __put_user(from->si_band, &to->si_band);
- err |= __put_user(from->si_fd, &to->si_fd);
- break;
- case __SI_FAULT:
- err |= __put_user((compat_uptr_t)(unsigned long)from->si_addr,
- &to->si_addr);
-#ifdef BUS_MCEERR_AO
- /*
- * Other callers might not initialize the si_lsb field,
- * so check explicitly for the right codes here.
- */
- if (from->si_signo == SIGBUS &&
- (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO))
- err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
-#endif
- break;
- case __SI_CHLD:
- err |= __put_user(from->si_pid, &to->si_pid);
- err |= __put_user(from->si_uid, &to->si_uid);
- err |= __put_user(from->si_status, &to->si_status);
- err |= __put_user(from->si_utime, &to->si_utime);
- err |= __put_user(from->si_stime, &to->si_stime);
- break;
- case __SI_RT: /* This is not generated by the kernel as of now. */
- case __SI_MESGQ: /* But this is */
- err |= __put_user(from->si_pid, &to->si_pid);
- err |= __put_user(from->si_uid, &to->si_uid);
- err |= __put_user(from->si_int, &to->si_int);
- break;
- case __SI_SYS:
- err |= __put_user((compat_uptr_t)(unsigned long)
- from->si_call_addr, &to->si_call_addr);
- err |= __put_user(from->si_syscall, &to->si_syscall);
- err |= __put_user(from->si_arch, &to->si_arch);
- break;
- default: /* this is just in case for now ... */
- err |= __put_user(from->si_pid, &to->si_pid);
- err |= __put_user(from->si_uid, &to->si_uid);
- break;
- }
- return err;
-}
-
-int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
-{
- if (copy_from_user(to, from, __ARCH_SI_PREAMBLE_SIZE) ||
- copy_from_user(to->_sifields._pad,
- from->_sifields._pad, SI_PAD_SIZE))
- return -EFAULT;
-
- return 0;
-}
-
/*
* VFP save/restore code.
*
diff --git a/arch/arm64/kernel/signal32_common.c b/arch/arm64/kernel/signal32_common.c
new file mode 100644
index 0000000..c8cba96
--- /dev/null
+++ b/arch/arm64/kernel/signal32_common.c
@@ -0,0 +1,135 @@
+/*
+ * Based on arch/arm/kernel/signal.c
+ *
+ * Copyright (C) 1995-2009 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ * Modified by Will Deacon <will.deacon@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/compat.h>
+#include <linux/signal.h>
+#include <linux/ratelimit.h>
+
+#include <asm/esr.h>
+#include <asm/fpsimd.h>
+#include <asm/signal32_common.h>
+#include <asm/uaccess.h>
+#include <asm/unistd.h>
+
+int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set)
+{
+ compat_sigset_t cset;
+
+ cset.sig[0] = set->sig[0] & 0xffffffffull;
+ cset.sig[1] = set->sig[0] >> 32;
+
+ return copy_to_user(uset, &cset, sizeof(*uset));
+}
+
+int get_sigset_t(sigset_t *set, const compat_sigset_t __user *uset)
+{
+ compat_sigset_t s32;
+
+ if (copy_from_user(&s32, uset, sizeof(*uset)))
+ return -EFAULT;
+
+ set->sig[0] = s32.sig[0] | (((long)s32.sig[1]) << 32);
+ return 0;
+}
+
+int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
+{
+ int err;
+
+ if (!access_ok(VERIFY_WRITE, to, sizeof(*to)))
+ return -EFAULT;
+
+ /* If you change siginfo_t structure, please be sure
+ * this code is fixed accordingly.
+ * It should never copy any pad contained in the structure
+ * to avoid security leaks, but must copy the generic
+ * 3 ints plus the relevant union member.
+ * This routine must convert siginfo from 64bit to 32bit as well
+ * at the same time.
+ */
+ err = __put_user(from->si_signo, &to->si_signo);
+ err |= __put_user(from->si_errno, &to->si_errno);
+ err |= __put_user((short)from->si_code, &to->si_code);
+ if (from->si_code < 0)
+ err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad,
+ SI_PAD_SIZE);
+ else switch (from->si_code & __SI_MASK) {
+ case __SI_KILL:
+ err |= __put_user(from->si_pid, &to->si_pid);
+ err |= __put_user(from->si_uid, &to->si_uid);
+ break;
+ case __SI_TIMER:
+ err |= __put_user(from->si_tid, &to->si_tid);
+ err |= __put_user(from->si_overrun, &to->si_overrun);
+ err |= __put_user(from->si_int, &to->si_int);
+ break;
+ case __SI_POLL:
+ err |= __put_user(from->si_band, &to->si_band);
+ err |= __put_user(from->si_fd, &to->si_fd);
+ break;
+ case __SI_FAULT:
+ err |= __put_user((compat_uptr_t)(unsigned long)from->si_addr,
+ &to->si_addr);
+#ifdef BUS_MCEERR_AO
+ /*
+ * Other callers might not initialize the si_lsb field,
+ * so check explicitly for the right codes here.
+ */
+ if (from->si_signo == SIGBUS &&
+ (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO))
+ err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
+#endif
+ break;
+ case __SI_CHLD:
+ err |= __put_user(from->si_pid, &to->si_pid);
+ err |= __put_user(from->si_uid, &to->si_uid);
+ err |= __put_user(from->si_status, &to->si_status);
+ err |= __put_user(from->si_utime, &to->si_utime);
+ err |= __put_user(from->si_stime, &to->si_stime);
+ break;
+ case __SI_RT: /* This is not generated by the kernel as of now. */
+ case __SI_MESGQ: /* But this is */
+ err |= __put_user(from->si_pid, &to->si_pid);
+ err |= __put_user(from->si_uid, &to->si_uid);
+ err |= __put_user(from->si_int, &to->si_int);
+ break;
+ case __SI_SYS:
+ err |= __put_user((compat_uptr_t)(unsigned long)
+ from->si_call_addr, &to->si_call_addr);
+ err |= __put_user(from->si_syscall, &to->si_syscall);
+ err |= __put_user(from->si_arch, &to->si_arch);
+ break;
+ default: /* this is just in case for now ... */
+ err |= __put_user(from->si_pid, &to->si_pid);
+ err |= __put_user(from->si_uid, &to->si_uid);
+ break;
+ }
+ return err;
+}
+
+int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
+{
+ if (copy_from_user(to, from, __ARCH_SI_PREAMBLE_SIZE) ||
+ copy_from_user(to->_sifields._pad,
+ from->_sifields._pad, SI_PAD_SIZE))
+ return -EFAULT;
+
+ return 0;
+}
--
2.7.4
next prev parent reply other threads:[~2016-10-21 20:50 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-21 20:32 [RFC3 nowrap: PATCH v7 00/18] ILP32 for ARM64 Yury Norov
2016-10-21 20:32 ` Yury Norov
2016-10-21 20:33 ` [PATCH 01/18] 32-bit ABI: introduce ARCH_32BIT_OFF_T config option Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-10-24 16:30 ` Chris Metcalf
2016-10-24 16:30 ` Chris Metcalf
2016-10-24 22:22 ` Arnd Bergmann
2016-10-27 9:29 ` Yury Norov
2016-10-27 9:29 ` Yury Norov
2016-10-21 20:33 ` [PATCH 02/18] arm64: ilp32: add documentation on the ILP32 ABI for ARM64 Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-10-24 16:36 ` Chris Metcalf
2016-10-24 16:36 ` Chris Metcalf
2016-10-27 9:40 ` Yury Norov
2016-10-27 9:40 ` Yury Norov
2016-10-21 20:33 ` [PATCH 03/18] arm64: rename COMPAT to AARCH32_EL0 in Kconfig Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-10-21 20:33 ` [PATCH 04/18] arm64: ensure the kernel is compiled for LP64 Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-10-21 20:33 ` [PATCH 05/18] arm64:uapi: set __BITS_PER_LONG correctly for ILP32 and LP64 Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-10-21 20:33 ` [PATCH 06/18] thread: move thread bits accessors to separated file Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-10-21 20:33 ` [PATCH 07/18] arm64: introduce is_a32_task and is_a32_thread (for AArch32 compat) Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-10-21 20:33 ` [PATCH 08/18] arm64: ilp32: add is_ilp32_compat_{task, thread} and TIF_32BIT_AARCH64 Yury Norov
2016-10-21 20:33 ` [PATCH 08/18] arm64: ilp32: add is_ilp32_compat_{task,thread} " Yury Norov
2016-10-21 20:33 ` [PATCH 09/18] arm64: introduce binfmt_elf32.c Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-12-05 15:10 ` Catalin Marinas
2016-12-14 9:39 ` Yury Norov
2016-12-14 9:39 ` Yury Norov
2016-10-21 20:33 ` [PATCH 10/18] arm64: ilp32: introduce binfmt_ilp32.c Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-12-05 15:38 ` Catalin Marinas
2016-12-05 15:38 ` Catalin Marinas
2016-12-21 18:56 ` Yury Norov
2016-12-21 18:56 ` Yury Norov
2017-01-06 14:48 ` Catalin Marinas
2017-01-06 14:48 ` Catalin Marinas
2016-10-21 20:33 ` [PATCH 11/18] arm64: ilp32: share aarch32 syscall handlers Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-12-05 17:12 ` Catalin Marinas
2016-12-06 7:32 ` Yury Norov
2016-12-06 7:32 ` Yury Norov
2016-10-21 20:33 ` [PATCH 12/18] arm64: ilp32: add sys_ilp32.c and a separate table (in entry.S) to use it Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-10-21 20:33 ` [PATCH 13/18] arm64: signal: share lp64 signal routines to ilp32 Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-10-21 20:33 ` Yury Norov [this message]
2016-10-21 20:33 ` [PATCH 14/18] arm64: signal32: move ilp32 and aarch32 common code to separated file Yury Norov
2016-12-05 16:18 ` Catalin Marinas
2016-12-05 16:18 ` Catalin Marinas
2016-12-06 9:36 ` Yury Norov
2016-12-06 9:36 ` Yury Norov
2016-10-21 20:33 ` [PATCH 15/18] arm64: ilp32: introduce ilp32-specific handlers for sigframe and ucontext Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-10-21 20:33 ` [PATCH 16/18] arm64: ptrace: handle ptrace_request differently for aarch32 and ilp32 Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-12-05 16:34 ` Catalin Marinas
2016-12-06 6:25 ` Yury Norov
2016-12-06 6:30 ` Yury Norov
2016-12-06 6:30 ` Yury Norov
2016-12-07 16:59 ` Catalin Marinas
2016-12-07 16:59 ` Catalin Marinas
2016-12-07 20:40 ` Arnd Bergmann
2016-12-07 20:40 ` Arnd Bergmann
2016-12-08 13:12 ` Catalin Marinas
2017-01-05 20:40 ` Yury Norov
2017-01-05 20:40 ` Yury Norov
2017-01-06 14:36 ` Catalin Marinas
2017-01-06 14:36 ` Catalin Marinas
2016-10-21 20:33 ` [PATCH 17/18] arm64:ilp32: add vdso-ilp32 and use for signal return Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-10-21 20:33 ` [PATCH 18/18] arm64:ilp32: add ARM64_ILP32 to Kconfig Yury Norov
2016-10-21 20:33 ` Yury Norov
2016-10-28 12:46 ` ILP32 for ARM64 - testing with lmbench Yury Norov
2016-11-17 3:28 ` Zhangjian (Bamvor)
2016-11-17 3:28 ` Zhangjian (Bamvor)
2016-11-17 5:02 ` Maxim Kuvyrkov
2016-11-17 5:02 ` Maxim Kuvyrkov
2016-11-17 7:48 ` Zhangjian (Bamvor)
2016-11-17 7:48 ` Zhangjian (Bamvor)
2016-12-05 10:16 ` Zhangjian (Bamvor)
2016-12-05 10:16 ` Zhangjian (Bamvor)
2016-12-05 14:13 ` Catalin Marinas
2016-12-05 14:13 ` Catalin Marinas
2016-12-11 12:08 ` Yury Norov
2016-12-11 12:08 ` Yury Norov
2016-11-07 8:23 ` ILP32 for ARM64: testing with glibc testsuite Yury Norov
2016-11-07 8:23 ` Yury Norov
2016-11-09 9:56 ` Yury Norov
2016-11-09 9:56 ` Yury Norov
2016-11-16 11:22 ` Maxim Kuvyrkov
2016-11-16 11:22 ` Maxim Kuvyrkov
2016-11-17 15:50 ` Catalin Marinas
2016-11-17 15:50 ` Catalin Marinas
2016-11-17 21:45 ` Steve Ellcey
2016-11-17 21:45 ` Steve Ellcey
2016-12-05 9:58 ` Zhangjian (Bamvor)
2016-12-05 9:58 ` Zhangjian (Bamvor)
2016-12-05 10:07 ` Andreas Schwab
2016-12-05 10:07 ` Andreas Schwab
2016-12-05 10:24 ` Zhangjian (Bamvor)
2016-12-05 10:24 ` Zhangjian (Bamvor)
2016-12-06 5:29 ` Yury Norov
2016-12-06 5:29 ` Yury Norov
2016-12-05 19:33 ` Steve Ellcey
2016-12-05 19:33 ` Steve Ellcey
2016-12-06 8:31 ` Andreas Schwab
2016-12-06 8:31 ` Andreas Schwab
2016-11-30 5:02 ` [RFC3 nowrap: PATCH v7 00/18] ILP32 for ARM64 Yury Norov
2016-11-30 5:02 ` Yury Norov
2016-11-30 6:52 ` Adam Borowski
2016-11-30 6:52 ` Adam Borowski
-- strict thread matches above, loose matches on Subject: below --
2016-08-17 11:46 [RFC2 " Yury Norov
2016-08-17 11:46 ` [PATCH 14/18] arm64: signal32: move ilp32 and aarch32 common code to separated file Yury Norov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477081997-4770-15-git-send-email-ynorov@caviumnetworks.com \
--to=ynorov@caviumnetworks.com \
--cc=Nathan_Lynch@mentor.com \
--cc=Prasun.Kapoor@caviumnetworks.com \
--cc=agraf@suse.de \
--cc=arnd@arndb.de \
--cc=bamvor.zhangjian@huawei.com \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=christoph.muellner@theobroma-systems.com \
--cc=cmetcalf@ezchip.com \
--cc=davem@davemloft.net \
--cc=geert@linux-m68k.org \
--cc=heiko.carstens@de.ibm.com \
--cc=joseph@codesourcery.com \
--cc=kilobyte@angband.pl \
--cc=klimov.linux@gmail.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linyongting@huawei.com \
--cc=manuel.montezelo@gmail.com \
--cc=maxim.kuvyrkov@linaro.org \
--cc=philipp.tomsich@theobroma-systems.com \
--cc=pinskia@gmail.com \
--cc=schwidefsky@de.ibm.com \
--cc=szabolcs.nagy@arm.com \
--cc=zhouchengming1@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).