messages from 2019-11-22 10:05:25 to 2019-12-03 05:03:00 UTC [more...]
[PATCH 0/3] thermal: tsens: Handle critical interrupts
2019-12-03 5:02 UTC (13+ messages)
` [PATCH 1/3] drivers: thermal: tsens: Add critical interrupt support
` [PATCH 2/3] drivers: thermal: tsens: Add watchdog support
[PATCH] drm/msm/mdp5: enable autocommit
2019-12-03 1:40 UTC (4+ messages)
[PATCH v1] drm/msm: add support for 2.4.1 DSI version for sc7180 soc
2019-12-02 19:55 UTC (2+ messages)
[DPU PATCH v3 2/5] drm: add constant N value in helper file
2019-12-02 18:59 UTC (7+ messages)
` [DPU PATCH v3 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon 845
` [DPU PATCH v3 5/5] drm/msm/dpu: add display port support in DPU
` [DPU PATCH v3 4/5] drm/msm/dp: add support for DP PLL driver
` [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support
[PATCH v2 1/5] interconnect: qcom: sdm845: Walk the list safely on node removal
2019-12-02 17:40 UTC (9+ messages)
` [PATCH v2 2/5] interconnect: qcom: qcs404: "
` [PATCH v2 3/5] interconnect: qcom: msm8974: "
` [PATCH v2 4/5] interconnect: Add a common helper for removing all nodes
` [PATCH v2 5/5] interconnect: qcom: Use the new common helper for node removal
[PATCH] rnndb: Add GBIF registers for a6xx GPU
2019-12-02 17:24 UTC (2+ messages)
[PATCH v2 0/2] tty: serial: msm_serial: Fix lockup issues
2019-12-02 16:40 UTC (5+ messages)
` [PATCH v2 1/2] tty: serial: msm_serial: Fix lockup for sysrq and oops
` [PATCH v2 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output
[DPU PATCH v3 0/5] List of patches for DP drivers on SnapDragon
2019-12-02 16:33 UTC
[DPU PATCH v3 0/5] List of patches for DP drivers on SnapDragon
2019-12-02 13:47 UTC
[PATCH v7 0/5] Add support for QCOM Core Power Reduction
2019-12-02 9:56 UTC (7+ messages)
` [PATCH v7 1/5] dt-bindings: power: avs: Add support for CPR (Core Power Reduction)
` [PATCH v7 2/5] "
` [PATCH v7 3/5] arm64: dts: qcom: qcs404: Add CPR and populate OPP table
` [PATCH v7 4/5] arm64: defconfig: enable CONFIG_QCOM_CPR
` [PATCH v7 5/5] arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM
[PATCH 0/4] drm+dt+efi: support devices with multiple possible panels
2019-11-30 18:39 UTC (5+ messages)
` [PATCH 1/4] dt-bindings: chosen: document panel-id binding
[PATCH v1 0/2] Add suppport for rm69299 Visionox panel driver and add devicetree bindings for visionox panel
2019-11-29 16:48 UTC (4+ messages)
` [PATCH v1 1/2] dt-bindings: display: add sc7180 panel variant
` [Freedreno] "
` [PATCH v1 2/2] drm/panel: add support for rm69299 visionox panel driver
[PATCH v3 0/1] Add USB related nodes for SC7180
2019-11-28 22:11 UTC (6+ messages)
` [PATCH v3 1/1] arm64: dts: qcom: sc7180: Add USB related nodes
[PATCH v3 00/13] cpuidle: psci: Support hierarchical CPU arrangement
2019-11-28 22:04 UTC (18+ messages)
` [PATCH v3 01/13] cpuidle: psci: Align psci_power_state count with idle state count
` [PATCH v3 02/13] dt: psci: Update DT bindings to support hierarchical PSCI states
` [PATCH v3 03/13] firmware: psci: Export functions to manage the OSI mode
` [PATCH v3 04/13] of: base: Add of_get_cpu_state_node() to get idle states for a CPU node
` [PATCH v3 05/13] cpuidle: dt: Support hierarchical CPU idle states
` [PATCH v3 06/13] cpuidle: psci: Simplify OF parsing of CPU idle state nodes
` [PATCH v3 07/13] cpuidle: psci: Support hierarchical CPU idle states
` [PATCH v3 08/13] cpuidle: psci: Add a helper to attach a CPU to its PM domain
` [PATCH v3 09/13] cpuidle: psci: Attach CPU devices to their PM domains
` [PATCH v3 10/13] cpuidle: psci: Prepare to use OS initiated suspend mode via "
` [PATCH v3 11/13] cpuidle: psci: Manage runtime PM in the idle path
` [PATCH v3 12/13] cpuidle: psci: Add support for PM domains by using genpd
` [PATCH v3 13/13] arm64: dts: Convert to the hierarchical CPU topology layout for MSM8916
[PATCH 1/5] interconnect: qcom: sdm845: Walk the list safely on node removal
2019-11-28 18:20 UTC (10+ messages)
` [PATCH 2/5] interconnect: qcom: qcs404: "
` [PATCH 3/5] interconnect: qcom: msm8974: "
` [PATCH 4/5] interconnect: Add a common helper for removing all nodes
` [PATCH 5/5] interconnect: qcom: Use the new common helper for node removal
[PATCH v4 0/3] interconnect: Add basic tracepoints
2019-11-28 18:08 UTC (7+ messages)
` [PATCH v4 1/3] interconnect: Move internal structs into a separate file
` [PATCH v4 2/3] interconnect: Add a name to struct icc_path
` [PATCH v4 3/3] interconnect: Add basic tracepoints
[PATCH 1/2] interconnect: Add a common standard aggregate function
2019-11-28 17:54 UTC (6+ messages)
` [PATCH 2/2] interconnect: qcom: Use the "
[PATCH v2 0/3] Add USB DWC3 support for SC7180
2019-11-28 11:33 UTC (4+ messages)
` [PATCH v2 1/3] usb: dwc3: Add support for SC7180 SOC
` [PATCH v2 2/3] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
` [PATCH v2 3/3] dt-bindings: usb: qcom,dwc3: Add compatible for SC7180
[PATCH v2 0/1] Add device node support for TSENS in SC7180
2019-11-28 9:54 UTC (2+ messages)
` [PATCH v2 1/1] arm64: dts: qcom: sc7180: "
[PATCH V3 00/10] remoteproc: qcom: q6v5-wcss: Add support for secure pil
2019-11-27 15:12 UTC (11+ messages)
` [PATCH V3 01/10] remoteproc: qcom: Add PRNG proxy clock
` [PATCH V3 02/10] remoteproc: qcom: Add secure PIL support
` [PATCH V3 03/10] remoteproc: qcom: Add support for split q6 + m3 wlan firmware
` [PATCH V3 04/10] remoteproc: qcom: Add ssr subdevice identifier
` [PATCH V3 05/10] remoteproc: qcom: Update regmap offsets for halt register
` [PATCH V3 06/10] dt-bindings: clock: qcom: Add reset for WCSSAON
` [PATCH V3 07/10] clk: qcom: Add WCSSAON reset
` [PATCH V3 08/10] dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
` [PATCH V3 09/10] arm64: dts: Add support for scm on IPQ8074 SoCs
` [PATCH V3 10/10] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
[PATCH V2 00/12] remoteproc: qcom: q6v5-wcss: Add support for secure pil
2019-11-27 15:03 UTC (4+ messages)
` [PATCH V2 12/12] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
[PATCH] phy: qcom-qmp: Use the correct style for SPDX License Identifier
2019-11-27 14:02 UTC
[PATCH V1 2/2] arm64: dts: qcom: sc7180: Add nodes for eMMC and SD card
2019-11-27 11:50 UTC
[PATCH V1 1/2] dt-bindings: mmc: sdhci-msm: Add compatible string for sc7180
2019-11-27 11:49 UTC
[PATCH] msm:disp:dpu1: Fix core clk rate in display driver
2019-11-27 10:16 UTC
[PATCH] msm:disp:dpu1: add scaler support on SC7180 display
2019-11-27 10:14 UTC
[PATCH V1 1/2] dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings
2019-11-27 9:01 UTC (3+ messages)
` [PATCH V1 2/2] interconnect: qcom: Add SC7180 interconnect provider driver
[PATCH v3 2/2] interconnect: qcom: Add OSM L3 interconnect provider support
2019-11-27 8:42 UTC (3+ messages)
[PATCH v2 0/8] Add GPU & Video Clock controller driver for SC7180
2019-11-27 4:06 UTC (5+ messages)
` [PATCH v2 3/8] dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings
[PATCH] clk: qcom: gcc-sdm845: Add missing flag to votable GDSCs
2019-11-26 18:11 UTC (2+ messages)
[PATCH v5 0/4] usb: xhci: Add support for Renesas USB controllers
2019-11-26 15:59 UTC (3+ messages)
[PATCH V1 0/2] Add SC7180 interconnect provider driver
2019-11-26 15:01 UTC
[PATCH V7 1/2] tty: serial: qcom_geni_serial: Wakeup IRQ cleanup
2019-11-26 12:21 UTC (4+ messages)
` [PATCH V7 2/2] tty: serial: qcom_geni_serial: Move loopback support to TIOCM_LOOP
[PATCH] mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register
2019-11-26 10:19 UTC
[PATCH V7 0/2] Cleanup wakeup IRQ and move loopback to TIOCM_LOOP
2019-11-25 15:08 UTC
[PATCH v2 0/5] DTS changes to support cpufreq on QCS404
2019-11-25 14:25 UTC (6+ messages)
` [PATCH v2 1/5] arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider
` [PATCH v2 2/5] arm64: dts: qcom: qcs404: Add HFPLL node
` [PATCH v2 3/5] arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider
` [PATCH v2 4/5] arm64: dts: qcom: qcs404: Add DVFS support
` [PATCH v2 5/5] arm64: defconfig: Enable HFPLL
[PATCH v3 0/7] Clock changes to support cpufreq on QCS404
2019-11-25 13:59 UTC (8+ messages)
` [PATCH v3 1/7] dt-bindings: mailbox: qcom: Add clock-name optional property
` [PATCH v3 2/7] clk: qcom: gcc: limit GPLL0_AO_OUT operating frequency
` [PATCH v3 3/7] clk: qcom: hfpll: register as clock provider
` [PATCH v3 4/7] clk: qcom: hfpll: CLK_IGNORE_UNUSED
` [PATCH v3 5/7] clk: qcom: hfpll: use clk_parent_data to specify the parent
` [PATCH v3 6/7] clk: qcom: apcs-msm8916: silently error out on EPROBE_DEFER
` [PATCH v3 7/7] clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent
[PATCH v2] ath10k: Handle "invalid" BDFs for msm8998 devices
2019-11-25 12:11 UTC (2+ messages)
[PATCH v6 1/5] Revert "tty: serial: qcom_geni_serial: Wakeup over UART RX"
2019-11-25 12:06 UTC (13+ messages)
` [PATCH v6 2/5] Revert "tty: serial: qcom_geni_serial: IRQ cleanup"
` [PATCH v6 3/5] tty: serial: qcom_geni_serial: IRQ cleanup
` [PATCH v6 4/5] tty: serial: qcom_geni_serial: Wakeup over UART RX
` [PATCH v6 5/5] tty: serial: qcom_geni_serial: Move loopback support to TIOCM_LOOP
[PATCH v6 0/5] Add wakeup support and move loopback to TIOCM_LOOP
2019-11-25 12:03 UTC (2+ messages)
[PATCH v2] ath10k: Fix qmi init error handling
2019-11-25 12:02 UTC (2+ messages)
[PATCH 0/4] Add support for SC7180 display
2019-11-25 11:59 UTC (5+ messages)
` [PATCH 1/4] dt-bindings: msm:disp: add sc7180 DPU variant
` [PATCH 2/4] msm:disp:dpu1: add support for display for SC7180 target
` [PATCH 3/4] msm:disp:dpu1: setup display datapath "
` [PATCH 4/4] msm:disp:dpu1: add mixer selection for display topology
[PATCH] ath10k: Handle when FW doesn't support QMI_WLFW_HOST_CAP_REQ_V01
2019-11-25 11:56 UTC (2+ messages)
[PATCH v2 00/13] cpuidle: psci: Support hierarchical CPU arrangement
2019-11-25 10:44 UTC (6+ messages)
` [PATCH v2 10/13] cpuidle: psci: Prepare to use OS initiated suspend mode via PM domains
[PATCH 3/4] drm/msm: Use dma_resv locking wrappers
2019-11-25 9:43 UTC
[PATCH 1/2] tty: serial: msm_serial: Fix lockup for sysrq and oops
2019-11-25 1:21 UTC (4+ messages)
` [PATCH 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output
[PATCH] drm/msm/adreno: fix zap vs no-zap handling
2019-11-24 22:23 UTC
[PATCH v3] msm:disp:dpu1: add support for display for SC7180 target
2019-11-23 0:44 UTC (2+ messages)
[Patch v4 0/7] Introduce Power domain based warming device driver
2019-11-22 23:59 UTC (3+ messages)
` [Patch v4 6/7] dt-bindings: soc: qcom: Extend RPMh power controller binding to describe thermal warming device
[PATCH v2 1/8] dt-bindings: arm-smmu: Add Adreno GPU variant
2019-11-22 23:32 UTC (8+ messages)
` [PATCH v2 2/8] iommu: Add DOMAIN_ATTR_SPLIT_TABLES
` [PATCH v2 3/8] iommu/arm-smmu: Pass io_pgtable_cfg to impl specific init_context
` [PATCH v2 4/8] iommu/arm-smmu: Add split pagetables for Adreno IOMMU implementations
` [PATCH v2 5/8] drm/msm: Attach the IOMMU device during initialization
` [PATCH v2 8/8] arm64: dts: qcom: sdm845: Update Adreno GPU SMMU compatible string
` [PATCH v2 7/8] drm/msm/a6xx: Support split pagetables
` [PATCH v2 6/8] drm/msm: Refactor address space initialization
[PATCH v2 0/8] iommu/arm-smmu: Split pagetable support for Adreno GPUs
2019-11-22 23:31 UTC
[PATCH 03/16] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180
2019-11-22 23:15 UTC (4+ messages)
` [PATCH 06/16] dt-bindings: remoteproc: qcom: Add power-domain bindings for Q6V5 PAS
[PATCH v3 0/3] interconnect: Add basic tracepoints
2019-11-22 21:10 UTC (6+ messages)
` [PATCH v3 1/3] interconnect: Move internal structs into a separate file
` [PATCH v3 2/3] interconnect: Add a name to struct icc_path
` [PATCH v3 3/3] interconnect: Add basic tracepoints
[PATCH v5 2/3] tty: serial: qcom_geni_serial: Wakeup over UART RX
2019-11-22 18:24 UTC (5+ messages)
[PATCH v6 0/5] Add wakeup support and move loopback to TIOCM_LOOP
2019-11-22 14:17 UTC
[RESEND PATCH V4 2/4] rpmsg: glink: Add support to handle signals command
2019-11-22 10:06 UTC
[PATCH V5 3/5] rpmsg: glink: Add support for rpmsg glink chrdev
2019-11-22 10:05 UTC (3+ messages)
` [PATCH V5 4/5] rpmsg: glink: Expose rpmsg name attr for glink
` [PATCH V5 5/5] rpmsg: glink: unregister rpmsg device during endpoint destroy
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).