linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan McDowell <noodles@earth.li>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Ansuel Smith <ansuelsmth@gmail.com>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/5] ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x
Date: Sat, 15 May 2021 17:52:21 +0100	[thread overview]
Message-ID: <fb8b3df3a25120cb1ae9adfd25c754334e8eaf4e.1621097174.git.noodles@earth.li> (raw)
In-Reply-To: <cover.1621097174.git.noodles@earth.li>

Now the ADM driver is in mainline add the appropriate definitions for it
and the NAND controller to get NAND working on IPQ806x platforms,

Signed-off-by: Jonathan McDowell <noodles@earth.li>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 67 +++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 98995ead4413..aaab3820ab0b 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -185,6 +185,31 @@
 					bias-pull-up;
 				};
 			};
+
+			nand_pins: nand_pins {
+				mux {
+					pins = "gpio34", "gpio35", "gpio36",
+					       "gpio37", "gpio38", "gpio39",
+					       "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				pullups {
+					pins = "gpio39";
+					bias-pull-up;
+				};
+
+				hold {
+					pins = "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					bias-bus-hold;
+				};
+			};
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -226,6 +251,26 @@
 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
 		};
 
+		adm_dma: dma@18300000 {
+			compatible = "qcom,adm";
+			reg = <0x18300000 0x100000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+
+			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+			clock-names = "core", "iface";
+
+			resets = <&gcc ADM0_RESET>,
+				 <&gcc ADM0_PBUS_RESET>,
+				 <&gcc ADM0_C0_RESET>,
+				 <&gcc ADM0_C1_RESET>,
+				 <&gcc ADM0_C2_RESET>;
+			reset-names = "clk", "pbus", "c0", "c1", "c2";
+			qcom,ee = <0>;
+
+			status = "disabled";
+		};
+
 		saw0: regulator@2089000 {
 			compatible = "qcom,saw2";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
@@ -403,6 +448,28 @@
 			status = "disabled";
 		};
 
+		nand: nand-controller@1ac00000 {
+			compatible = "qcom,ipq806x-nand";
+			reg = <0x1ac00000 0x800>;
+
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+
+			clocks = <&gcc EBI2_CLK>,
+				 <&gcc EBI2_AON_CLK>;
+			clock-names = "core", "aon";
+
+			dmas = <&adm_dma 3>;
+			dma-names = "rxtx";
+			qcom,cmd-crci = <15>;
+			qcom,data-crci = <3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		sata: sata@29000000 {
 			compatible = "qcom,ipq806x-ahci", "generic-ahci";
 			reg = <0x29000000 0x180>;
-- 
2.20.1


  reply	other threads:[~2021-05-15 17:22 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-15 16:52 [PATCH 0/5] ARM: dts: qcom: Enable various devices for IPQ806x / RB3011 Jonathan McDowell
2021-05-15 16:52 ` Jonathan McDowell [this message]
2021-05-17  9:40   ` [PATCH 1/5] ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x Vinod Koul
2021-05-19 10:29     ` Jonathan McDowell
2021-05-15 16:52 ` [PATCH 2/5] ARM: dts: qcom: Add tsens details " Jonathan McDowell
2021-05-17  9:42   ` Vinod Koul
2021-05-19 11:00     ` Jonathan McDowell
2021-05-15 16:52 ` [PATCH 3/5] ARM: dts: qcom: Add USB port definitions " Jonathan McDowell
2021-05-15 16:53 ` [PATCH 4/5] ARM: dts: qcom: add L2CC and RPM for IPQ8064 Jonathan McDowell
2021-05-15 16:53 ` [PATCH 5/5] ARM: dts: qcom: Enable NAND + USB for RB3011 Jonathan McDowell
2021-05-20 17:29 ` [PATCH v2 0/5] ARM: dts: qcom: Enable various devices for IPQ806x / RB3011 Jonathan McDowell
2021-05-20 17:29   ` [PATCH v2 1/5] ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x Jonathan McDowell
2021-05-20 17:29   ` [PATCH v2 2/5] ARM: dts: qcom: Add tsens details " Jonathan McDowell
2021-05-20 17:30   ` [PATCH v2 3/5] ARM: dts: qcom: Add USB port definitions " Jonathan McDowell
2021-05-31 15:58     ` Bjorn Andersson
2021-05-20 17:30   ` [PATCH v2 4/5] ARM: dts: qcom: add L2CC and RPM for IPQ8064 Jonathan McDowell
2021-05-20 17:30   ` [PATCH v2 5/5] ARM: dts: qcom: Enable NAND + USB for RB3011 Jonathan McDowell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fb8b3df3a25120cb1ae9adfd25c754334e8eaf4e.1621097174.git.noodles@earth.li \
    --to=noodles@earth.li \
    --cc=agross@kernel.org \
    --cc=ansuelsmth@gmail.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH 1/5] ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).