* [PATCH v2 0/3] can: kvaser_usb: CAN clock frequency regression
@ 2022-06-03 8:38 Jimmy Assarsson
2022-06-03 8:38 ` [PATCH v2 1/3] can: kvaser_usb: Replace run-time checks with struct kvaser_usb_driver_info Jimmy Assarsson
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Jimmy Assarsson @ 2022-06-03 8:38 UTC (permalink / raw)
To: linux-can, Marc Kleine-Budde; +Cc: Jimmy Assarsson, stable, Jimmy Assarsson
When fixing the CAN clock frequency,
fb12797ab1fe ("can: kvaser_usb: get CAN clock frequency from device"),
I introduced a regression.
For Leaf devices based on M32C, the firmware expects bittiming parameters
calculated for 16MHz clock. Regardless of the actual clock frequency.
This regression affects M32C based Leaf devices with non-16MHz clock.
Also correct the bittiming constants in kvaser_usb_leaf.c, where the limits
are different depending on which firmware/device being used.
Once merged to mainline, I'll backport these fixes for the stable kernels.
Changes in v2:
- Add struct kvaser_usb_driver_info as suggested by Marc Kleine-Budde [1],
instead of adding dev->card_data.quirks.
[1] https://lore.kernel.org/linux-can/20220602063031.415858-1-extja@kvaser.com/T/#maf9cd66c368ce43eb509a27c69d0323cfc776809
Jimmy Assarsson (3):
can: kvaser_usb: Replace run-time checks with struct
kvaser_usb_driver_info
can: kvaser_usb: kvaser_usb_leaf: Fix CAN clock frequency regression
can: kvaser_usb: kvaser_usb_leaf: Fix bittiming limits
drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 73 ++++-
.../net/can/usb/kvaser_usb/kvaser_usb_core.c | 253 +++++++++---------
.../net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 14 +-
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 119 ++++----
4 files changed, 255 insertions(+), 204 deletions(-)
--
2.36.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/3] can: kvaser_usb: Replace run-time checks with struct kvaser_usb_driver_info
2022-06-03 8:38 [PATCH v2 0/3] can: kvaser_usb: CAN clock frequency regression Jimmy Assarsson
@ 2022-06-03 8:38 ` Jimmy Assarsson
2022-06-03 8:38 ` [PATCH v2 2/3] can: kvaser_usb: kvaser_usb_leaf: Fix CAN clock frequency regression Jimmy Assarsson
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Jimmy Assarsson @ 2022-06-03 8:38 UTC (permalink / raw)
To: linux-can, Marc Kleine-Budde; +Cc: Jimmy Assarsson, stable, Jimmy Assarsson
Unify and move compile-time known information into new struct
kvaser_usb_driver_info, in favour of run-time checks.
All Kvaser USBcanII supports listen-only mode and error counter reporting.
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
---
Changes in v2:
- New patch
Note: I got a patch for reading capabilities from Leaf devices,
that will remove kvaser_usb_driver_info_leaf_{err,err_listen}.
drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 52 +++-
.../net/can/usb/kvaser_usb/kvaser_usb_core.c | 249 +++++++++---------
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 24 +-
3 files changed, 174 insertions(+), 151 deletions(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
index 3a49257f9fa6..e3b7fce2cd89 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
@@ -35,9 +35,9 @@
#define KVASER_USB_RX_BUFFER_SIZE 3072
#define KVASER_USB_MAX_NET_DEVICES 5
-/* USB devices features */
-#define KVASER_USB_HAS_SILENT_MODE BIT(0)
-#define KVASER_USB_HAS_TXRX_ERRORS BIT(1)
+/* Kvaser USB device quirks */
+#define KVASER_USB_QUIRK_HAS_SILENT_MODE BIT(0)
+#define KVASER_USB_QUIRK_HAS_TXRX_ERRORS BIT(1)
/* Device capabilities */
#define KVASER_USB_CAP_BERR_CAP 0x01
@@ -65,12 +65,7 @@ struct kvaser_usb_dev_card_data_hydra {
struct kvaser_usb_dev_card_data {
u32 ctrlmode_supported;
u32 capabilities;
- union {
- struct {
- enum kvaser_usb_leaf_family family;
- } leaf;
- struct kvaser_usb_dev_card_data_hydra hydra;
- };
+ struct kvaser_usb_dev_card_data_hydra hydra;
};
/* Context for an outstanding, not yet ACKed, transmission */
@@ -83,7 +78,7 @@ struct kvaser_usb {
struct usb_device *udev;
struct usb_interface *intf;
struct kvaser_usb_net_priv *nets[KVASER_USB_MAX_NET_DEVICES];
- const struct kvaser_usb_dev_ops *ops;
+ const struct kvaser_usb_driver_info *driver_info;
const struct kvaser_usb_dev_cfg *cfg;
struct usb_endpoint_descriptor *bulk_in, *bulk_out;
@@ -165,6 +160,12 @@ struct kvaser_usb_dev_ops {
u16 transid);
};
+struct kvaser_usb_driver_info {
+ u32 quirks;
+ enum kvaser_usb_leaf_family family;
+ const struct kvaser_usb_dev_ops *ops;
+};
+
struct kvaser_usb_dev_cfg {
const struct can_clock clock;
const unsigned int timestamp_freq;
@@ -184,4 +185,35 @@ int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd,
int len);
int kvaser_usb_can_rx_over_error(struct net_device *netdev);
+
+static const struct kvaser_usb_driver_info kvaser_usb_driver_info_hydra = {
+ .quirks = 0,
+ .ops = &kvaser_usb_hydra_dev_ops,
+};
+
+static const struct kvaser_usb_driver_info kvaser_usb_driver_info_usbcan = {
+ .quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS |
+ KVASER_USB_QUIRK_HAS_SILENT_MODE,
+ .family = KVASER_USBCAN,
+ .ops = &kvaser_usb_leaf_dev_ops,
+};
+
+static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf = {
+ .quirks = 0,
+ .family = KVASER_LEAF,
+ .ops = &kvaser_usb_leaf_dev_ops,
+};
+
+static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf_err = {
+ .quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS,
+ .family = KVASER_LEAF,
+ .ops = &kvaser_usb_leaf_dev_ops,
+};
+
+static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf_err_listen = {
+ .quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS |
+ KVASER_USB_QUIRK_HAS_SILENT_MODE,
+ .family = KVASER_LEAF,
+ .ops = &kvaser_usb_leaf_dev_ops,
+};
#endif /* KVASER_USB_H */
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
index e67658b53d02..4f0f8849b568 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
@@ -61,8 +61,6 @@
#define USB_USBCAN_R_V2_PRODUCT_ID 294
#define USB_LEAF_LIGHT_R_V2_PRODUCT_ID 295
#define USB_LEAF_LIGHT_HS_V2_OEM2_PRODUCT_ID 296
-#define USB_LEAF_PRODUCT_ID_END \
- USB_LEAF_LIGHT_HS_V2_OEM2_PRODUCT_ID
/* Kvaser USBCan-II devices product ids */
#define USB_USBCAN_REVB_PRODUCT_ID 2
@@ -89,116 +87,113 @@
#define USB_USBCAN_PRO_4HS_PRODUCT_ID 276
#define USB_HYBRID_CANLIN_PRODUCT_ID 277
#define USB_HYBRID_PRO_CANLIN_PRODUCT_ID 278
-#define USB_HYDRA_PRODUCT_ID_END \
- USB_HYBRID_PRO_CANLIN_PRODUCT_ID
-
-static inline bool kvaser_is_leaf(const struct usb_device_id *id)
-{
- return (id->idProduct >= USB_LEAF_DEVEL_PRODUCT_ID &&
- id->idProduct <= USB_CAN_R_PRODUCT_ID) ||
- (id->idProduct >= USB_LEAF_LITE_V2_PRODUCT_ID &&
- id->idProduct <= USB_LEAF_PRODUCT_ID_END);
-}
-
-static inline bool kvaser_is_usbcan(const struct usb_device_id *id)
-{
- return id->idProduct >= USB_USBCAN_REVB_PRODUCT_ID &&
- id->idProduct <= USB_MEMORATOR_PRODUCT_ID;
-}
-
-static inline bool kvaser_is_hydra(const struct usb_device_id *id)
-{
- return id->idProduct >= USB_BLACKBIRD_V2_PRODUCT_ID &&
- id->idProduct <= USB_HYDRA_PRODUCT_ID_END;
-}
static const struct usb_device_id kvaser_usb_table[] = {
/* Leaf USB product IDs */
- { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_DEVEL_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_PRODUCT_ID) },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_DEVEL_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS |
- KVASER_USB_HAS_SILENT_MODE },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_SPRO_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS |
- KVASER_USB_HAS_SILENT_MODE },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_LS_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS |
- KVASER_USB_HAS_SILENT_MODE },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_SWC_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS |
- KVASER_USB_HAS_SILENT_MODE },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_LIN_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS |
- KVASER_USB_HAS_SILENT_MODE },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_SPRO_LS_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS |
- KVASER_USB_HAS_SILENT_MODE },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_SPRO_SWC_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS |
- KVASER_USB_HAS_SILENT_MODE },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO2_DEVEL_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS |
- KVASER_USB_HAS_SILENT_MODE },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO2_HSHS_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS |
- KVASER_USB_HAS_SILENT_MODE },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_UPRO_HSHS_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_GI_PRODUCT_ID) },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_GI_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_OBDII_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS |
- KVASER_USB_HAS_SILENT_MODE },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO2_HSLS_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_CH_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_BLACKBIRD_SPRO_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_OEM_MERCURY_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_OEM_LEAF_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_CAN_R_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_2HS_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_2HS_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_R_V2_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_R_V2_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM2_PRODUCT_ID) },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_2HS_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_2HS_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_R_V2_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_R_V2_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM2_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
/* USBCANII USB product IDs */
{ USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN2_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_usbcan },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_REVB_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_usbcan },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_MEMORATOR_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_usbcan },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_VCI2_PRODUCT_ID),
- .driver_info = KVASER_USB_HAS_TXRX_ERRORS },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_usbcan },
/* Minihydra USB product IDs */
- { USB_DEVICE(KVASER_VENDOR_ID, USB_BLACKBIRD_V2_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_PRO_5HS_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_PRO_5HS_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_4HS_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_HS_V2_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_PRO_2HS_V2_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_2HS_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_PRO_2HS_V2_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_2CANLIN_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_ATI_USBCAN_PRO_2HS_V2_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_ATI_MEMO_PRO_2HS_V2_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_PRO_2CANLIN_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_U100_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_U100P_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_U100S_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_PRO_4HS_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_CANLIN_PRODUCT_ID) },
- { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_PRO_CANLIN_PRODUCT_ID) },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_BLACKBIRD_V2_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_PRO_5HS_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_PRO_5HS_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_4HS_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_HS_V2_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_PRO_2HS_V2_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_2HS_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_PRO_2HS_V2_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_2CANLIN_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_ATI_USBCAN_PRO_2HS_V2_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_ATI_MEMO_PRO_2HS_V2_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_PRO_2CANLIN_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_U100_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_U100P_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_U100S_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_PRO_4HS_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_CANLIN_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_PRO_CANLIN_PRODUCT_ID),
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra },
{ }
};
MODULE_DEVICE_TABLE(usb, kvaser_usb_table);
@@ -285,6 +280,7 @@ int kvaser_usb_can_rx_over_error(struct net_device *netdev)
static void kvaser_usb_read_bulk_callback(struct urb *urb)
{
struct kvaser_usb *dev = urb->context;
+ const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops;
int err;
unsigned int i;
@@ -301,8 +297,8 @@ static void kvaser_usb_read_bulk_callback(struct urb *urb)
goto resubmit_urb;
}
- dev->ops->dev_read_bulk_callback(dev, urb->transfer_buffer,
- urb->actual_length);
+ ops->dev_read_bulk_callback(dev, urb->transfer_buffer,
+ urb->actual_length);
resubmit_urb:
usb_fill_bulk_urb(urb, dev->udev,
@@ -396,6 +392,7 @@ static int kvaser_usb_open(struct net_device *netdev)
{
struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
struct kvaser_usb *dev = priv->dev;
+ const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops;
int err;
err = open_candev(netdev);
@@ -406,11 +403,11 @@ static int kvaser_usb_open(struct net_device *netdev)
if (err)
goto error;
- err = dev->ops->dev_set_opt_mode(priv);
+ err = ops->dev_set_opt_mode(priv);
if (err)
goto error;
- err = dev->ops->dev_start_chip(priv);
+ err = ops->dev_start_chip(priv);
if (err) {
netdev_warn(netdev, "Cannot start device, error %d\n", err);
goto error;
@@ -467,22 +464,23 @@ static int kvaser_usb_close(struct net_device *netdev)
{
struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
struct kvaser_usb *dev = priv->dev;
+ const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops;
int err;
netif_stop_queue(netdev);
- err = dev->ops->dev_flush_queue(priv);
+ err = ops->dev_flush_queue(priv);
if (err)
netdev_warn(netdev, "Cannot flush queue, error %d\n", err);
- if (dev->ops->dev_reset_chip) {
- err = dev->ops->dev_reset_chip(dev, priv->channel);
+ if (ops->dev_reset_chip) {
+ err = ops->dev_reset_chip(dev, priv->channel);
if (err)
netdev_warn(netdev, "Cannot reset card, error %d\n",
err);
}
- err = dev->ops->dev_stop_chip(priv);
+ err = ops->dev_stop_chip(priv);
if (err)
netdev_warn(netdev, "Cannot stop device, error %d\n", err);
@@ -521,6 +519,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
{
struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
struct kvaser_usb *dev = priv->dev;
+ const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops;
struct net_device_stats *stats = &netdev->stats;
struct kvaser_usb_tx_urb_context *context = NULL;
struct urb *urb;
@@ -563,8 +562,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
goto freeurb;
}
- buf = dev->ops->dev_frame_to_cmd(priv, skb, &cmd_len,
- context->echo_index);
+ buf = ops->dev_frame_to_cmd(priv, skb, &cmd_len, context->echo_index);
if (!buf) {
stats->tx_dropped++;
dev_kfree_skb(skb);
@@ -648,15 +646,16 @@ static void kvaser_usb_remove_interfaces(struct kvaser_usb *dev)
}
}
-static int kvaser_usb_init_one(struct kvaser_usb *dev,
- const struct usb_device_id *id, int channel)
+static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel)
{
struct net_device *netdev;
struct kvaser_usb_net_priv *priv;
+ const struct kvaser_usb_driver_info *driver_info = dev->driver_info;
+ const struct kvaser_usb_dev_ops *ops = driver_info->ops;
int err;
- if (dev->ops->dev_reset_chip) {
- err = dev->ops->dev_reset_chip(dev, channel);
+ if (ops->dev_reset_chip) {
+ err = ops->dev_reset_chip(dev, channel);
if (err)
return err;
}
@@ -685,20 +684,19 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev,
priv->can.state = CAN_STATE_STOPPED;
priv->can.clock.freq = dev->cfg->clock.freq;
priv->can.bittiming_const = dev->cfg->bittiming_const;
- priv->can.do_set_bittiming = dev->ops->dev_set_bittiming;
- priv->can.do_set_mode = dev->ops->dev_set_mode;
- if ((id->driver_info & KVASER_USB_HAS_TXRX_ERRORS) ||
+ priv->can.do_set_bittiming = ops->dev_set_bittiming;
+ priv->can.do_set_mode = ops->dev_set_mode;
+ if ((driver_info->quirks & KVASER_USB_QUIRK_HAS_TXRX_ERRORS) ||
(priv->dev->card_data.capabilities & KVASER_USB_CAP_BERR_CAP))
- priv->can.do_get_berr_counter = dev->ops->dev_get_berr_counter;
- if (id->driver_info & KVASER_USB_HAS_SILENT_MODE)
+ priv->can.do_get_berr_counter = ops->dev_get_berr_counter;
+ if (driver_info->quirks & KVASER_USB_QUIRK_HAS_SILENT_MODE)
priv->can.ctrlmode_supported |= CAN_CTRLMODE_LISTENONLY;
priv->can.ctrlmode_supported |= dev->card_data.ctrlmode_supported;
if (priv->can.ctrlmode_supported & CAN_CTRLMODE_FD) {
priv->can.data_bittiming_const = dev->cfg->data_bittiming_const;
- priv->can.do_set_data_bittiming =
- dev->ops->dev_set_data_bittiming;
+ priv->can.do_set_data_bittiming = ops->dev_set_data_bittiming;
}
netdev->flags |= IFF_ECHO;
@@ -729,29 +727,22 @@ static int kvaser_usb_probe(struct usb_interface *intf,
struct kvaser_usb *dev;
int err;
int i;
+ const struct kvaser_usb_driver_info *driver_info;
+ const struct kvaser_usb_dev_ops *ops;
+
+ driver_info = (const struct kvaser_usb_driver_info *)id->driver_info;
+ if (!driver_info)
+ return -ENODEV;
dev = devm_kzalloc(&intf->dev, sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
- if (kvaser_is_leaf(id)) {
- dev->card_data.leaf.family = KVASER_LEAF;
- dev->ops = &kvaser_usb_leaf_dev_ops;
- } else if (kvaser_is_usbcan(id)) {
- dev->card_data.leaf.family = KVASER_USBCAN;
- dev->ops = &kvaser_usb_leaf_dev_ops;
- } else if (kvaser_is_hydra(id)) {
- dev->ops = &kvaser_usb_hydra_dev_ops;
- } else {
- dev_err(&intf->dev,
- "Product ID (%d) is not a supported Kvaser USB device\n",
- id->idProduct);
- return -ENODEV;
- }
-
dev->intf = intf;
+ dev->driver_info = driver_info;
+ ops = driver_info->ops;
- err = dev->ops->dev_setup_endpoints(dev);
+ err = ops->dev_setup_endpoints(dev);
if (err) {
dev_err(&intf->dev, "Cannot get usb endpoint(s)");
return err;
@@ -765,22 +756,22 @@ static int kvaser_usb_probe(struct usb_interface *intf,
dev->card_data.ctrlmode_supported = 0;
dev->card_data.capabilities = 0;
- err = dev->ops->dev_init_card(dev);
+ err = ops->dev_init_card(dev);
if (err) {
dev_err(&intf->dev,
"Failed to initialize card, error %d\n", err);
return err;
}
- err = dev->ops->dev_get_software_info(dev);
+ err = ops->dev_get_software_info(dev);
if (err) {
dev_err(&intf->dev,
"Cannot get software info, error %d\n", err);
return err;
}
- if (dev->ops->dev_get_software_details) {
- err = dev->ops->dev_get_software_details(dev);
+ if (ops->dev_get_software_details) {
+ err = ops->dev_get_software_details(dev);
if (err) {
dev_err(&intf->dev,
"Cannot get software details, error %d\n", err);
@@ -798,14 +789,14 @@ static int kvaser_usb_probe(struct usb_interface *intf,
dev_dbg(&intf->dev, "Max outstanding tx = %d URBs\n", dev->max_tx_urbs);
- err = dev->ops->dev_get_card_info(dev);
+ err = ops->dev_get_card_info(dev);
if (err) {
dev_err(&intf->dev, "Cannot get card info, error %d\n", err);
return err;
}
- if (dev->ops->dev_get_capabilities) {
- err = dev->ops->dev_get_capabilities(dev);
+ if (ops->dev_get_capabilities) {
+ err = ops->dev_get_capabilities(dev);
if (err) {
dev_err(&intf->dev,
"Cannot get capabilities, error %d\n", err);
@@ -815,7 +806,7 @@ static int kvaser_usb_probe(struct usb_interface *intf,
}
for (i = 0; i < dev->nchannels; i++) {
- err = kvaser_usb_init_one(dev, id, i);
+ err = kvaser_usb_init_one(dev, i);
if (err) {
kvaser_usb_remove_interfaces(dev);
return err;
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index c805b999c543..5cf940ba3f7f 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -404,7 +404,7 @@ kvaser_usb_leaf_frame_to_cmd(const struct kvaser_usb_net_priv *priv,
sizeof(struct kvaser_cmd_tx_can);
cmd->u.tx_can.channel = priv->channel;
- switch (dev->card_data.leaf.family) {
+ switch (dev->driver_info->family) {
case KVASER_LEAF:
cmd_tx_can_flags = &cmd->u.tx_can.leaf.flags;
break;
@@ -550,7 +550,7 @@ static int kvaser_usb_leaf_get_software_info_inner(struct kvaser_usb *dev)
if (err)
return err;
- switch (dev->card_data.leaf.family) {
+ switch (dev->driver_info->family) {
case KVASER_LEAF:
kvaser_usb_leaf_get_software_info_leaf(dev, &cmd.u.leaf.softinfo);
break;
@@ -597,7 +597,7 @@ static int kvaser_usb_leaf_get_card_info(struct kvaser_usb *dev)
dev->nchannels = cmd.u.cardinfo.nchannels;
if (dev->nchannels > KVASER_USB_MAX_NET_DEVICES ||
- (dev->card_data.leaf.family == KVASER_USBCAN &&
+ (dev->driver_info->family == KVASER_USBCAN &&
dev->nchannels > MAX_USBCAN_NET_DEVICES))
return -EINVAL;
@@ -730,7 +730,7 @@ kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
new_state < CAN_STATE_BUS_OFF)
priv->can.can_stats.restarts++;
- switch (dev->card_data.leaf.family) {
+ switch (dev->driver_info->family) {
case KVASER_LEAF:
if (es->leaf.error_factor) {
priv->can.can_stats.bus_error++;
@@ -809,7 +809,7 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev,
}
}
- switch (dev->card_data.leaf.family) {
+ switch (dev->driver_info->family) {
case KVASER_LEAF:
if (es->leaf.error_factor) {
cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT;
@@ -999,7 +999,7 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev,
stats = &priv->netdev->stats;
if ((cmd->u.rx_can_header.flag & MSG_FLAG_ERROR_FRAME) &&
- (dev->card_data.leaf.family == KVASER_LEAF &&
+ (dev->driver_info->family == KVASER_LEAF &&
cmd->id == CMD_LEAF_LOG_MESSAGE)) {
kvaser_usb_leaf_leaf_rx_error(dev, cmd);
return;
@@ -1015,7 +1015,7 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev,
return;
}
- switch (dev->card_data.leaf.family) {
+ switch (dev->driver_info->family) {
case KVASER_LEAF:
rx_data = cmd->u.leaf.rx_can.data;
break;
@@ -1030,7 +1030,7 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev,
return;
}
- if (dev->card_data.leaf.family == KVASER_LEAF && cmd->id ==
+ if (dev->driver_info->family == KVASER_LEAF && cmd->id ==
CMD_LEAF_LOG_MESSAGE) {
cf->can_id = le32_to_cpu(cmd->u.leaf.log_message.id);
if (cf->can_id & KVASER_EXTENDED_FRAME)
@@ -1128,14 +1128,14 @@ static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev,
break;
case CMD_LEAF_LOG_MESSAGE:
- if (dev->card_data.leaf.family != KVASER_LEAF)
+ if (dev->driver_info->family != KVASER_LEAF)
goto warn;
kvaser_usb_leaf_rx_can_msg(dev, cmd);
break;
case CMD_CHIP_STATE_EVENT:
case CMD_CAN_ERROR_EVENT:
- if (dev->card_data.leaf.family == KVASER_LEAF)
+ if (dev->driver_info->family == KVASER_LEAF)
kvaser_usb_leaf_leaf_rx_error(dev, cmd);
else
kvaser_usb_leaf_usbcan_rx_error(dev, cmd);
@@ -1147,12 +1147,12 @@ static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev,
/* Ignored commands */
case CMD_USBCAN_CLOCK_OVERFLOW_EVENT:
- if (dev->card_data.leaf.family != KVASER_USBCAN)
+ if (dev->driver_info->family != KVASER_USBCAN)
goto warn;
break;
case CMD_FLUSH_QUEUE_REPLY:
- if (dev->card_data.leaf.family != KVASER_LEAF)
+ if (dev->driver_info->family != KVASER_LEAF)
goto warn;
break;
--
2.36.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/3] can: kvaser_usb: kvaser_usb_leaf: Fix CAN clock frequency regression
2022-06-03 8:38 [PATCH v2 0/3] can: kvaser_usb: CAN clock frequency regression Jimmy Assarsson
2022-06-03 8:38 ` [PATCH v2 1/3] can: kvaser_usb: Replace run-time checks with struct kvaser_usb_driver_info Jimmy Assarsson
@ 2022-06-03 8:38 ` Jimmy Assarsson
2022-06-03 8:38 ` [PATCH v2 3/3] can: kvaser_usb: kvaser_usb_leaf: Fix bittiming limits Jimmy Assarsson
2022-07-04 13:07 ` [PATCH v2 0/3] can: kvaser_usb: CAN clock frequency regression Marc Kleine-Budde
3 siblings, 0 replies; 6+ messages in thread
From: Jimmy Assarsson @ 2022-06-03 8:38 UTC (permalink / raw)
To: linux-can, Marc Kleine-Budde; +Cc: Jimmy Assarsson, stable, Jimmy Assarsson
The firmware of M32C based Leaf devices expects bittiming parameters
calculated for 16MHz clock.
Since we use the actual clock frequency of the device, the device may end
up with wrong bittiming parameters, depending on user requested parameters.
This regression affects M32C based Leaf devices with non-16MHz clock.
Fixes: fb12797ab1fe ("can: kvaser_usb: get CAN clock frequency from device")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
---
Changes in v2:
- Remove quriks member in struct kvaser_usb_dev_card_data,
and use quirks in struct kvaser_usb_driver_info instead.
drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 14 ++++++++---
.../net/can/usb/kvaser_usb/kvaser_usb_core.c | 20 ++++++++-------
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 25 ++++++++++++-------
3 files changed, 38 insertions(+), 21 deletions(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
index e3b7fce2cd89..383b7144d6b5 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
@@ -38,6 +38,7 @@
/* Kvaser USB device quirks */
#define KVASER_USB_QUIRK_HAS_SILENT_MODE BIT(0)
#define KVASER_USB_QUIRK_HAS_TXRX_ERRORS BIT(1)
+#define KVASER_USB_QUIRK_IGNORE_CLK_FREQ BIT(2)
/* Device capabilities */
#define KVASER_USB_CAP_BERR_CAP 0x01
@@ -199,21 +200,28 @@ static const struct kvaser_usb_driver_info kvaser_usb_driver_info_usbcan = {
};
static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf = {
- .quirks = 0,
+ .quirks = KVASER_USB_QUIRK_IGNORE_CLK_FREQ,
.family = KVASER_LEAF,
.ops = &kvaser_usb_leaf_dev_ops,
};
static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf_err = {
- .quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS,
+ .quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS |
+ KVASER_USB_QUIRK_IGNORE_CLK_FREQ,
.family = KVASER_LEAF,
.ops = &kvaser_usb_leaf_dev_ops,
};
static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf_err_listen = {
.quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS |
- KVASER_USB_QUIRK_HAS_SILENT_MODE,
+ KVASER_USB_QUIRK_HAS_SILENT_MODE |
+ KVASER_USB_QUIRK_IGNORE_CLK_FREQ,
.family = KVASER_LEAF,
.ops = &kvaser_usb_leaf_dev_ops,
};
+
+static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leafimx = {
+ .quirks = 0,
+ .ops = &kvaser_usb_leaf_dev_ops,
+};
#endif /* KVASER_USB_H */
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
index 4f0f8849b568..7e63e198b03a 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
@@ -89,7 +89,7 @@
#define USB_HYBRID_PRO_CANLIN_PRODUCT_ID 278
static const struct usb_device_id kvaser_usb_table[] = {
- /* Leaf USB product IDs */
+ /* Leaf M32C USB product IDs */
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_DEVEL_PRODUCT_ID),
.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_PRODUCT_ID),
@@ -130,22 +130,24 @@ static const struct usb_device_id kvaser_usb_table[] = {
.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_CAN_R_PRODUCT_ID),
.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err },
+
+ /* Leaf i.MX28 USB product IDs */
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID),
- .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID),
- .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID),
- .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_2HS_PRODUCT_ID),
- .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_2HS_PRODUCT_ID),
- .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_R_V2_PRODUCT_ID),
- .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_R_V2_PRODUCT_ID),
- .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM2_PRODUCT_ID),
- .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+ .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
/* USBCANII USB product IDs */
{ USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN2_PRODUCT_ID),
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 5cf940ba3f7f..957144cee414 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -524,16 +524,23 @@ static void kvaser_usb_leaf_get_software_info_leaf(struct kvaser_usb *dev,
dev->fw_version = le32_to_cpu(softinfo->fw_version);
dev->max_tx_urbs = le16_to_cpu(softinfo->max_outstanding_tx);
- switch (sw_options & KVASER_USB_LEAF_SWOPTION_FREQ_MASK) {
- case KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK:
+ if (dev->driver_info->quirks & KVASER_USB_QUIRK_IGNORE_CLK_FREQ) {
+ /* Firmware expects bittiming parameters calculated for 16MHz
+ * clock, regardless of the actual clock
+ */
dev->cfg = &kvaser_usb_leaf_dev_cfg_16mhz;
- break;
- case KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK:
- dev->cfg = &kvaser_usb_leaf_dev_cfg_24mhz;
- break;
- case KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK:
- dev->cfg = &kvaser_usb_leaf_dev_cfg_32mhz;
- break;
+ } else {
+ switch (sw_options & KVASER_USB_LEAF_SWOPTION_FREQ_MASK) {
+ case KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK:
+ dev->cfg = &kvaser_usb_leaf_dev_cfg_16mhz;
+ break;
+ case KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK:
+ dev->cfg = &kvaser_usb_leaf_dev_cfg_24mhz;
+ break;
+ case KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK:
+ dev->cfg = &kvaser_usb_leaf_dev_cfg_32mhz;
+ break;
+ }
}
}
--
2.36.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 3/3] can: kvaser_usb: kvaser_usb_leaf: Fix bittiming limits
2022-06-03 8:38 [PATCH v2 0/3] can: kvaser_usb: CAN clock frequency regression Jimmy Assarsson
2022-06-03 8:38 ` [PATCH v2 1/3] can: kvaser_usb: Replace run-time checks with struct kvaser_usb_driver_info Jimmy Assarsson
2022-06-03 8:38 ` [PATCH v2 2/3] can: kvaser_usb: kvaser_usb_leaf: Fix CAN clock frequency regression Jimmy Assarsson
@ 2022-06-03 8:38 ` Jimmy Assarsson
2022-07-04 13:07 ` [PATCH v2 0/3] can: kvaser_usb: CAN clock frequency regression Marc Kleine-Budde
3 siblings, 0 replies; 6+ messages in thread
From: Jimmy Assarsson @ 2022-06-03 8:38 UTC (permalink / raw)
To: linux-can, Marc Kleine-Budde; +Cc: Jimmy Assarsson, stable, Jimmy Assarsson
Use correct bittiming limits depending on device.
For devices based on USBcanII, Leaf M32C or Leaf i.MX28.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Fixes: b4f20130af23 ("can: kvaser_usb: add support for Kvaser Leaf v2 and usb mini PCIe")
Fixes: f5d4abea3ce0 ("can: kvaser_usb: Add support for the USBcan-II family")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
---
Changes in v2:
- Rebased patch
drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 13 ++++
.../net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 14 +---
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 76 +++++++++++--------
3 files changed, 57 insertions(+), 46 deletions(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
index 383b7144d6b5..2813ec58ae1c 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
@@ -28,6 +28,7 @@
#include <linux/can.h>
#include <linux/can/dev.h>
+#include <linux/can/netlink.h>
#define KVASER_USB_MAX_RX_URBS 4
#define KVASER_USB_MAX_TX_URBS 128
@@ -224,4 +225,16 @@ static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leafimx = {
.quirks = 0,
.ops = &kvaser_usb_leaf_dev_ops,
};
+
+static const struct can_bittiming_const kvaser_usb_flexc_bittiming_const = {
+ .name = "kvaser_usb_flex",
+ .tseg1_min = 4,
+ .tseg1_max = 16,
+ .tseg2_min = 2,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 256,
+ .brp_inc = 1,
+};
#endif /* KVASER_USB_H */
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
index a26823c5b62a..faf901e7e568 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
@@ -375,18 +375,6 @@ static const struct can_bittiming_const kvaser_usb_hydra_kcan_bittiming_c = {
.brp_inc = 1,
};
-static const struct can_bittiming_const kvaser_usb_hydra_flexc_bittiming_c = {
- .name = "kvaser_usb_flex",
- .tseg1_min = 4,
- .tseg1_max = 16,
- .tseg2_min = 2,
- .tseg2_max = 8,
- .sjw_max = 4,
- .brp_min = 1,
- .brp_max = 256,
- .brp_inc = 1,
-};
-
static const struct can_bittiming_const kvaser_usb_hydra_rt_bittiming_c = {
.name = "kvaser_usb_rt",
.tseg1_min = 2,
@@ -2052,7 +2040,7 @@ static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_flexc = {
.freq = 24 * MEGA /* Hz */,
},
.timestamp_freq = 1,
- .bittiming_const = &kvaser_usb_hydra_flexc_bittiming_c,
+ .bittiming_const = &kvaser_usb_flexc_bittiming_const,
};
static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_rt = {
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 957144cee414..cc809ecd1e62 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -101,16 +101,6 @@
#define USBCAN_ERROR_STATE_RX_ERROR BIT(1)
#define USBCAN_ERROR_STATE_BUSERROR BIT(2)
-/* bittiming parameters */
-#define KVASER_USB_TSEG1_MIN 1
-#define KVASER_USB_TSEG1_MAX 16
-#define KVASER_USB_TSEG2_MIN 1
-#define KVASER_USB_TSEG2_MAX 8
-#define KVASER_USB_SJW_MAX 4
-#define KVASER_USB_BRP_MIN 1
-#define KVASER_USB_BRP_MAX 64
-#define KVASER_USB_BRP_INC 1
-
/* ctrl modes */
#define KVASER_CTRL_MODE_NORMAL 1
#define KVASER_CTRL_MODE_SILENT 2
@@ -343,48 +333,68 @@ struct kvaser_usb_err_summary {
};
};
-static const struct can_bittiming_const kvaser_usb_leaf_bittiming_const = {
- .name = "kvaser_usb",
- .tseg1_min = KVASER_USB_TSEG1_MIN,
- .tseg1_max = KVASER_USB_TSEG1_MAX,
- .tseg2_min = KVASER_USB_TSEG2_MIN,
- .tseg2_max = KVASER_USB_TSEG2_MAX,
- .sjw_max = KVASER_USB_SJW_MAX,
- .brp_min = KVASER_USB_BRP_MIN,
- .brp_max = KVASER_USB_BRP_MAX,
- .brp_inc = KVASER_USB_BRP_INC,
+static const struct can_bittiming_const kvaser_usb_leaf_m16c_bittiming_const = {
+ .name = "kvaser_usb_ucii",
+ .tseg1_min = 4,
+ .tseg1_max = 16,
+ .tseg2_min = 2,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 16,
+ .brp_inc = 1,
+};
+
+static const struct can_bittiming_const kvaser_usb_leaf_m32c_bittiming_const = {
+ .name = "kvaser_usb_leaf",
+ .tseg1_min = 3,
+ .tseg1_max = 16,
+ .tseg2_min = 2,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 2,
+ .brp_max = 128,
+ .brp_inc = 2,
};
-static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_8mhz = {
+static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_usbcan_dev_cfg = {
.clock = {
.freq = 8 * MEGA /* Hz */,
},
.timestamp_freq = 1,
- .bittiming_const = &kvaser_usb_leaf_bittiming_const,
+ .bittiming_const = &kvaser_usb_leaf_m16c_bittiming_const,
+};
+
+static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_m32c_dev_cfg = {
+ .clock = {
+ .freq = 16 * MEGA /* Hz */,
+ },
+ .timestamp_freq = 1,
+ .bittiming_const = &kvaser_usb_leaf_m32c_bittiming_const,
};
-static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_16mhz = {
+static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_imx_dev_cfg_16mhz = {
.clock = {
.freq = 16 * MEGA /* Hz */,
},
.timestamp_freq = 1,
- .bittiming_const = &kvaser_usb_leaf_bittiming_const,
+ .bittiming_const = &kvaser_usb_flexc_bittiming_const,
};
-static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_24mhz = {
+static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_imx_dev_cfg_24mhz = {
.clock = {
.freq = 24 * MEGA /* Hz */,
},
.timestamp_freq = 1,
- .bittiming_const = &kvaser_usb_leaf_bittiming_const,
+ .bittiming_const = &kvaser_usb_flexc_bittiming_const,
};
-static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_32mhz = {
+static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_imx_dev_cfg_32mhz = {
.clock = {
.freq = 32 * MEGA /* Hz */,
},
.timestamp_freq = 1,
- .bittiming_const = &kvaser_usb_leaf_bittiming_const,
+ .bittiming_const = &kvaser_usb_flexc_bittiming_const,
};
static void *
@@ -528,17 +538,17 @@ static void kvaser_usb_leaf_get_software_info_leaf(struct kvaser_usb *dev,
/* Firmware expects bittiming parameters calculated for 16MHz
* clock, regardless of the actual clock
*/
- dev->cfg = &kvaser_usb_leaf_dev_cfg_16mhz;
+ dev->cfg = &kvaser_usb_leaf_m32c_dev_cfg;
} else {
switch (sw_options & KVASER_USB_LEAF_SWOPTION_FREQ_MASK) {
case KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK:
- dev->cfg = &kvaser_usb_leaf_dev_cfg_16mhz;
+ dev->cfg = &kvaser_usb_leaf_imx_dev_cfg_16mhz;
break;
case KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK:
- dev->cfg = &kvaser_usb_leaf_dev_cfg_24mhz;
+ dev->cfg = &kvaser_usb_leaf_imx_dev_cfg_24mhz;
break;
case KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK:
- dev->cfg = &kvaser_usb_leaf_dev_cfg_32mhz;
+ dev->cfg = &kvaser_usb_leaf_imx_dev_cfg_32mhz;
break;
}
}
@@ -565,7 +575,7 @@ static int kvaser_usb_leaf_get_software_info_inner(struct kvaser_usb *dev)
dev->fw_version = le32_to_cpu(cmd.u.usbcan.softinfo.fw_version);
dev->max_tx_urbs =
le16_to_cpu(cmd.u.usbcan.softinfo.max_outstanding_tx);
- dev->cfg = &kvaser_usb_leaf_dev_cfg_8mhz;
+ dev->cfg = &kvaser_usb_leaf_usbcan_dev_cfg;
break;
}
--
2.36.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 0/3] can: kvaser_usb: CAN clock frequency regression
2022-06-03 8:38 [PATCH v2 0/3] can: kvaser_usb: CAN clock frequency regression Jimmy Assarsson
` (2 preceding siblings ...)
2022-06-03 8:38 ` [PATCH v2 3/3] can: kvaser_usb: kvaser_usb_leaf: Fix bittiming limits Jimmy Assarsson
@ 2022-07-04 13:07 ` Marc Kleine-Budde
2022-07-04 15:07 ` Jimmy Assarsson
3 siblings, 1 reply; 6+ messages in thread
From: Marc Kleine-Budde @ 2022-07-04 13:07 UTC (permalink / raw)
To: Jimmy Assarsson; +Cc: linux-can, Jimmy Assarsson, stable
[-- Attachment #1: Type: text/plain, Size: 1216 bytes --]
On 03.06.2022 10:38:17, Jimmy Assarsson wrote:
> When fixing the CAN clock frequency,
> fb12797ab1fe ("can: kvaser_usb: get CAN clock frequency from device"),
> I introduced a regression.
>
> For Leaf devices based on M32C, the firmware expects bittiming parameters
> calculated for 16MHz clock. Regardless of the actual clock frequency.
>
> This regression affects M32C based Leaf devices with non-16MHz clock.
>
> Also correct the bittiming constants in kvaser_usb_leaf.c, where the limits
> are different depending on which firmware/device being used.
>
> Once merged to mainline, I'll backport these fixes for the stable kernels.
Added to linux-can/testing. I had to move the kvaser_usb_driver_info
into kvaser_usb_core.c and the keep struct can_bittiming_const
kvaser_usb_flexc_bittiming_const in kvaser_usb_hydra.c as structs in
header files cause defined but not used warnings on some platforms.
regards,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 0/3] can: kvaser_usb: CAN clock frequency regression
2022-07-04 13:07 ` [PATCH v2 0/3] can: kvaser_usb: CAN clock frequency regression Marc Kleine-Budde
@ 2022-07-04 15:07 ` Jimmy Assarsson
0 siblings, 0 replies; 6+ messages in thread
From: Jimmy Assarsson @ 2022-07-04 15:07 UTC (permalink / raw)
To: Marc Kleine-Budde; +Cc: linux-can, Jimmy Assarsson, stable
On 7/4/22 15:07, Marc Kleine-Budde wrote:
> On 03.06.2022 10:38:17, Jimmy Assarsson wrote:
>> When fixing the CAN clock frequency,
>> fb12797ab1fe ("can: kvaser_usb: get CAN clock frequency from device"),
>> I introduced a regression.
>>
>> For Leaf devices based on M32C, the firmware expects bittiming parameters
>> calculated for 16MHz clock. Regardless of the actual clock frequency.
>>
>> This regression affects M32C based Leaf devices with non-16MHz clock.
>>
>> Also correct the bittiming constants in kvaser_usb_leaf.c, where the limits
>> are different depending on which firmware/device being used.
>>
>> Once merged to mainline, I'll backport these fixes for the stable kernels.
>
> Added to linux-can/testing. I had to move the kvaser_usb_driver_info
> into kvaser_usb_core.c and the keep struct can_bittiming_const
> kvaser_usb_flexc_bittiming_const in kvaser_usb_hydra.c as structs in
> header files cause defined but not used warnings on some platforms.
Ok. Thanks Marc!
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-07-04 15:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-06-03 8:38 [PATCH v2 0/3] can: kvaser_usb: CAN clock frequency regression Jimmy Assarsson
2022-06-03 8:38 ` [PATCH v2 1/3] can: kvaser_usb: Replace run-time checks with struct kvaser_usb_driver_info Jimmy Assarsson
2022-06-03 8:38 ` [PATCH v2 2/3] can: kvaser_usb: kvaser_usb_leaf: Fix CAN clock frequency regression Jimmy Assarsson
2022-06-03 8:38 ` [PATCH v2 3/3] can: kvaser_usb: kvaser_usb_leaf: Fix bittiming limits Jimmy Assarsson
2022-07-04 13:07 ` [PATCH v2 0/3] can: kvaser_usb: CAN clock frequency regression Marc Kleine-Budde
2022-07-04 15:07 ` Jimmy Assarsson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).