linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Peter De Schrijver <pdeschrijver@nvidia.com>,
	Prashant Gaikwad <pgaikwad@nvidia.com>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Peter Geis <pgwipeout@gmail.com>,
	Nicolas Chauvet <kwizart@gmail.com>,
	Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 03/12] clk: tegra: cclk: Add helpers for handling PLLX rate changes
Date: Wed, 18 Dec 2019 23:21:33 +0300	[thread overview]
Message-ID: <20191218202142.11717-4-digetx@gmail.com> (raw)
In-Reply-To: <20191218202142.11717-1-digetx@gmail.com>

CCLK should be re-parented away from PLLX if PLLX's rate is changing.
The PLLP parent is a common safe CPU parent for all Tegra SoCs, thus
CCLK will be re-parented to PLLP before PLLX rate-change begins and then
switched back to PLLX after the rate-change completion. This patch adds
helper functions which perform CCLK re-parenting, these helpers will be
utilized by further patches.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-tegra-super-cclk.c | 34 ++++++++++++++++++++++++
 drivers/clk/tegra/clk.h                  |  2 ++
 2 files changed, 36 insertions(+)

diff --git a/drivers/clk/tegra/clk-tegra-super-cclk.c b/drivers/clk/tegra/clk-tegra-super-cclk.c
index 7bcb9e8d0860..a03119c30456 100644
--- a/drivers/clk/tegra/clk-tegra-super-cclk.c
+++ b/drivers/clk/tegra/clk-tegra-super-cclk.c
@@ -25,6 +25,9 @@
 
 #define SUPER_CDIV_ENB		BIT(31)
 
+static struct tegra_clk_super_mux *cclk_super;
+static bool cclk_on_pllx;
+
 static u8 cclk_super_get_parent(struct clk_hw *hw)
 {
 	return tegra_clk_super_ops.get_parent(hw);
@@ -115,6 +118,9 @@ struct clk *tegra_clk_register_super_cclk(const char *name,
 	struct clk_init_data init;
 	u32 val;
 
+	if (WARN_ON(cclk_super))
+		return ERR_PTR(-EBUSY);
+
 	super = kzalloc(sizeof(*super), GFP_KERNEL);
 	if (!super)
 		return ERR_PTR(-ENOMEM);
@@ -173,6 +179,34 @@ struct clk *tegra_clk_register_super_cclk(const char *name,
 	clk = clk_register(NULL, &super->hw);
 	if (IS_ERR(clk))
 		kfree(super);
+	else
+		cclk_super = super;
 
 	return clk;
 }
+
+int tegra_cclk_pre_pllx_rate_change(void)
+{
+	if (IS_ERR_OR_NULL(cclk_super))
+		return -EINVAL;
+
+	if (cclk_super_get_parent(&cclk_super->hw) == PLLX_INDEX)
+		cclk_on_pllx = true;
+	else
+		cclk_on_pllx = false;
+
+	/*
+	 * CPU needs to be temporarily re-parented away from PLLX if PLLX
+	 * changes its rate. PLLP is a safe parent for CPU on all Tegra SoCs.
+	 */
+	if (cclk_on_pllx)
+		cclk_super_set_parent(&cclk_super->hw, PLLP_INDEX);
+
+	return 0;
+}
+
+void tegra_cclk_post_pllx_rate_change(void)
+{
+	if (cclk_on_pllx)
+		cclk_super_set_parent(&cclk_super->hw, PLLX_INDEX);
+}
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index fa18bef914af..0afe28f4372b 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -771,6 +771,8 @@ struct clk *tegra_clk_register_super_cclk(const char *name,
 		const char * const *parent_names, u8 num_parents,
 		unsigned long flags, void __iomem *reg, u8 clk_super_flags,
 		spinlock_t *lock);
+int tegra_cclk_pre_pllx_rate_change(void);
+void tegra_cclk_post_pllx_rate_change(void);
 
 /**
  * struct tegra_sdmmc_mux - switch divider with Low Jitter inputs for SDMMC
-- 
2.24.0


  parent reply	other threads:[~2019-12-18 20:22 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-18 20:21 [PATCH v6 00/12] NVIDIA Tegra20 CPUFreq driver major update Dmitry Osipenko
2019-12-18 20:21 ` [PATCH v6 01/12] clk: tegra: Add custom CCLK implementation Dmitry Osipenko
2019-12-18 20:21 ` [PATCH v6 02/12] clk: tegra: pll: Add pre/post rate-change hooks Dmitry Osipenko
2019-12-18 20:21 ` Dmitry Osipenko [this message]
2019-12-18 20:21 ` [PATCH v6 04/12] clk: tegra20: Use custom CCLK implementation Dmitry Osipenko
2019-12-18 20:21 ` [PATCH v6 05/12] clk: tegra30: " Dmitry Osipenko
2019-12-18 20:21 ` [PATCH v6 06/12] ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30/114/124 Dmitry Osipenko
2019-12-18 20:21 ` [PATCH v6 07/12] ARM: tegra: Don't enable PLLX while resuming from LP1 on Tegra30 Dmitry Osipenko
2020-02-01 22:57   ` Marcel Ziswiler
2020-02-02  1:08     ` Dmitry Osipenko
2019-12-18 20:21 ` [PATCH v6 08/12] dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30 Dmitry Osipenko
2019-12-18 20:21 ` [PATCH v6 09/12] cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now) Dmitry Osipenko
2019-12-18 20:21 ` [PATCH v6 10/12] ARM: tegra: Create tegra20-cpufreq platform device on Tegra30 Dmitry Osipenko
2019-12-18 20:21 ` [PATCH v6 11/12] ARM: dts: tegra30: beaver: Set up voltage regulators for DVFS Dmitry Osipenko
2019-12-18 20:21 ` [PATCH v6 12/12] ARM: dts: tegra30: beaver: Add CPU Operating Performance Points Dmitry Osipenko
2020-01-07 23:17 ` [PATCH v6 00/12] NVIDIA Tegra20 CPUFreq driver major update Dmitry Osipenko
2020-01-14 15:53 ` Peter De Schrijver
2020-01-14 20:36   ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191218202142.11717-4-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=kwizart@gmail.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=marcel.ziswiler@toradex.com \
    --cc=mturquette@baylibre.com \
    --cc=pdeschrijver@nvidia.com \
    --cc=pgaikwad@nvidia.com \
    --cc=pgwipeout@gmail.com \
    --cc=rjw@rjwysocki.net \
    --cc=sboyd@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).