From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: qemu-devel@nongnu.org, "Alex Bennée" <alex.bennee@linaro.org>,
"Marcel Apfelbaum" <marcel@redhat.com>,
"Michael S . Tsirkin" <mst@redhat.com>,
"Igor Mammedov" <imammedo@redhat.com>
Cc: linux-cxl@vger.kernel.org,
"Ben Widawsky" <ben.widawsky@intel.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
linuxarm@huawei.com,
"Shameerali Kolothum Thodi"
<shameerali.kolothum.thodi@huawei.com>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Saransh Gupta1" <saransh@ibm.com>,
"Shreyas Shah" <shreyas.shah@elastics.cloud>,
"Chris Browy" <cbrowy@avery-design.com>,
"Samarth Saxena" <samarths@cadence.com>,
"Dan Williams" <dan.j.williams@intel.com>
Subject: [PATCH v6 32/43] mem/cxl_type3: Add read and write functions for associated hostmem.
Date: Fri, 11 Feb 2022 12:07:36 +0000 [thread overview]
Message-ID: <20220211120747.3074-33-Jonathan.Cameron@huawei.com> (raw)
In-Reply-To: <20220211120747.3074-1-Jonathan.Cameron@huawei.com>
From: Jonathan Cameron <jonathan.cameron@huawei.com>
Once a read or write reaches a CXL type 3 device, the HDM decoders
on the device are used to establish the Device Physical Address
which should be accessed. These functions peform the required maths
and then directly access the hostmem->mr to fullfil the actual
operation. Note that failed writes are silent, but failed reads
return poison. Note this is based loosely on:
https://lore.kernel.org/qemu-devel/20200817161853.593247-6-f4bug@amsat.org/
[RFC PATCH 0/9] hw/misc: Add support for interleaved memory accesses
Only lightly tested so far. More complex test cases yet to be written.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/mem/cxl_type3.c | 81 +++++++++++++++++++++++++++++++++++++
include/hw/cxl/cxl_device.h | 5 +++
2 files changed, 86 insertions(+)
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index b1ba4bf0de..064e8c942c 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -161,6 +161,87 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
&ct3d->cxl_dstate.device_registers);
}
+/* TODO: Support multiple HDM decoders and DPA skip */
+static bool cxl_type3_dpa(CXLType3Dev *ct3d, hwaddr host_addr, uint64_t *dpa)
+{
+ uint32_t *cache_mem = ct3d->cxl_cstate.crb.cache_mem_registers;
+ uint64_t decoder_base, decoder_size, hpa_offset;
+ uint32_t hdm0_ctrl;
+ int ig, iw;
+
+ decoder_base = (((uint64_t)cache_mem[R_CXL_HDM_DECODER0_BASE_HI] << 32) |
+ cache_mem[R_CXL_HDM_DECODER0_BASE_LO]);
+ if ((uint64_t)host_addr < decoder_base) {
+ return false;
+ }
+
+ hpa_offset = (uint64_t)host_addr - decoder_base;
+
+ decoder_size = ((uint64_t)cache_mem[R_CXL_HDM_DECODER0_SIZE_HI] << 32) |
+ cache_mem[R_CXL_HDM_DECODER0_SIZE_LO];
+ if (hpa_offset >= decoder_size) {
+ return false;
+ }
+
+ hdm0_ctrl = cache_mem[R_CXL_HDM_DECODER0_CTRL];
+ iw = FIELD_EX32(hdm0_ctrl, CXL_HDM_DECODER0_CTRL, IW);
+ ig = FIELD_EX32(hdm0_ctrl, CXL_HDM_DECODER0_CTRL, IG);
+
+ *dpa = (MAKE_64BIT_MASK(0, 8 + ig) & hpa_offset) |
+ ((MAKE_64BIT_MASK(8 + ig + iw, 64 - 8 - ig - iw) & hpa_offset) >> iw);
+
+ return true;
+}
+
+MemTxResult cxl_type3_read(PCIDevice *d, hwaddr host_addr, uint64_t *data,
+ unsigned size, MemTxAttrs attrs)
+{
+ CXLType3Dev *ct3d = CT3(d);
+ uint64_t dpa_offset;
+ MemoryRegion *mr;
+
+ /* TODO support volatile region */
+ mr = host_memory_backend_get_memory(ct3d->hostmem);
+ if (!mr) {
+ return MEMTX_ERROR;
+ }
+
+ if (!cxl_type3_dpa(ct3d, host_addr, &dpa_offset)) {
+ return MEMTX_ERROR;
+ }
+
+ if (dpa_offset > int128_get64(mr->size)) {
+ return MEMTX_ERROR;
+ }
+
+ return memory_region_dispatch_read(mr, dpa_offset, data,
+ size_memop(size), attrs);
+}
+
+MemTxResult cxl_type3_write(PCIDevice *d, hwaddr host_addr, uint64_t data,
+ unsigned size, MemTxAttrs attrs)
+{
+ CXLType3Dev *ct3d = CT3(d);
+ uint64_t dpa_offset;
+ MemoryRegion *mr;
+
+ mr = host_memory_backend_get_memory(ct3d->hostmem);
+ if (!mr) {
+ return MEMTX_OK;
+ }
+
+ if (!cxl_type3_dpa(ct3d, host_addr, &dpa_offset)) {
+ return MEMTX_OK;
+ }
+
+ if (dpa_offset > int128_get64(mr->size)) {
+ return MEMTX_OK;
+ }
+
+ return memory_region_dispatch_write(mr, dpa_offset, data,
+ size_memop(size), attrs);
+}
+
static void ct3d_reset(DeviceState *dev)
{
CXLType3Dev *ct3d = CT3(dev);
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 43908f161b..83da5d4e8f 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -264,4 +264,9 @@ struct CXLType3Class {
uint64_t offset);
};
+MemTxResult cxl_type3_read(PCIDevice *d, hwaddr host_addr, uint64_t *data,
+ unsigned size, MemTxAttrs attrs);
+MemTxResult cxl_type3_write(PCIDevice *d, hwaddr host_addr, uint64_t data,
+ unsigned size, MemTxAttrs attrs);
+
#endif
--
2.32.0
next prev parent reply other threads:[~2022-02-11 12:24 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-11 12:07 [PATCH v6 00/43] CXl 2.0 emulation Support Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 01/43] hw/pci/cxl: Add a CXL component type (interface) Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 02/43] hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5) Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 03/43] MAINTAINERS: Add entry for Compute Express Link Emulation Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 04/43] hw/cxl/device: Introduce a CXL device (8.2.8) Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 05/43] hw/cxl/device: Implement the CAP array (8.2.8.1-2) Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 06/43] hw/cxl/device: Implement basic mailbox (8.2.8.4) Jonathan Cameron
2022-03-01 15:32 ` Alex Bennée
2022-03-03 16:31 ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 07/43] hw/cxl/device: Add memory device utilities Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 08/43] hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1) Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 09/43] hw/cxl/device: Timestamp implementation (8.2.9.3) Jonathan Cameron
2022-03-01 15:54 ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 10/43] hw/cxl/device: Add log commands (8.2.9.4) + CEL Jonathan Cameron
2022-03-01 17:45 ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 11/43] hw/pxb: Use a type for realizing expanders Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 12/43] hw/pci/cxl: Create a CXL bus type Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 13/43] cxl: Machine level control on whether CXL support is enabled Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 14/43] hw/pxb: Allow creation of a CXL PXB (host bridge) Jonathan Cameron
2022-03-01 17:47 ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 15/43] qtest/cxl: Introduce initial test for pxb-cxl only Jonathan Cameron
2022-03-01 18:00 ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 16/43] hw/cxl/rp: Add a root port Jonathan Cameron
2022-03-01 18:08 ` Alex Bennée
2022-03-03 17:22 ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 17/43] hw/cxl/device: Add a memory device (8.2.8.5) Jonathan Cameron
2022-02-11 16:50 ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 18/43] qtests/cxl: Add initial root port and CXL type3 tests Jonathan Cameron
2022-03-01 18:11 ` Alex Bennée
2022-03-03 17:53 ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 19/43] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12) Jonathan Cameron
2022-03-01 18:17 ` Alex Bennée
2022-03-03 18:07 ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 20/43] hw/cxl/device: Add some trivial commands Jonathan Cameron
2022-03-01 18:46 ` Alex Bennée
2022-03-04 13:16 ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 21/43] hw/cxl/device: Plumb real Label Storage Area (LSA) sizing Jonathan Cameron
2022-03-02 10:01 ` Alex Bennée
2022-03-04 13:30 ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 22/43] hw/cxl/device: Implement get/set Label Storage Area (LSA) Jonathan Cameron
2022-03-02 10:03 ` Alex Bennée
2022-03-04 14:16 ` Jonathan Cameron
2022-03-04 14:26 ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 23/43] hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142) Jonathan Cameron
2022-03-02 10:20 ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 24/43] acpi/cxl: Add _OSC implementation (9.14.2) Jonathan Cameron
2022-03-02 12:14 ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 25/43] acpi/cxl: Create the CEDT (9.14.1) Jonathan Cameron
2022-03-02 12:16 ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 26/43] hw/cxl/component: Add utils for interleave parameter encoding/decoding Jonathan Cameron
2022-03-02 12:17 ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 27/43] hw/cxl/host: Add support for CXL Fixed Memory Windows Jonathan Cameron
2022-03-02 6:55 ` Markus Armbruster
2022-03-04 15:56 ` Jonathan Cameron
2022-03-04 17:13 ` Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 28/43] acpi/cxl: Introduce CFMWS structures in CEDT Jonathan Cameron
2022-03-02 12:18 ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 29/43] hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxl Jonathan Cameron
2022-03-02 13:53 ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 30/43] pci/pcie_port: Add pci_find_port_by_pn() Jonathan Cameron
2022-03-02 16:07 ` Alex Bennée
2022-02-11 12:07 ` [PATCH v6 31/43] CXL/cxl_component: Add cxl_get_hb_cstate() Jonathan Cameron
2022-03-02 16:07 ` Alex Bennée
2022-02-11 12:07 ` Jonathan Cameron [this message]
2022-02-11 12:07 ` [PATCH v6 33/43] cxl/cxl-host: Add memops for CFMWS region Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 34/43] RFC: softmmu/memory: Add ops to memory_region_ram_init_from_file Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 35/43] hw/cxl/component Add a dumb HDM decoder handler Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 36/43] i386/pc: Enable CXL fixed memory windows Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 37/43] tests/acpi: q35: Allow addition of a CXL test Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 38/43] qtests/bios-tables-test: Add a test for CXL emulation Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 39/43] tests/acpi: Add tables " Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 40/43] qtest/cxl: Add more complex test cases with CFMWs Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 41/43] hw/arm/virt: Basic CXL enablement on pci_expander_bridge instances pxb-cxl Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 42/43] qtest/cxl: Add aarch64 virt test for CXL Jonathan Cameron
2022-02-11 12:07 ` [PATCH v6 43/43] docs/cxl: Add initial Compute eXpress Link (CXL) documentation Jonathan Cameron
2022-02-18 18:17 ` [PATCH v6 00/43] CXl 2.0 emulation Support Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220211120747.3074-33-Jonathan.Cameron@huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alex.bennee@linaro.org \
--cc=ben.widawsky@intel.com \
--cc=cbrowy@avery-design.com \
--cc=dan.j.williams@intel.com \
--cc=f4bug@amsat.org \
--cc=imammedo@redhat.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=marcel@redhat.com \
--cc=mst@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=samarths@cadence.com \
--cc=saransh@ibm.com \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=shreyas.shah@elastics.cloud \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).