Re: [PATCH v6 19/43] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12)

["Alex Bennée" <alex.bennee@linaro.org>]

Jonathan Cameron <Jonathan.Cameron@huawei.com> writes:

> From: Ben Widawsky <ben.widawsky@intel.com>
>
> A device's volatile and persistent memory are known Host Defined Memory
> (HDM) regions. The mechanism by which the device is programmed to claim
> the addresses associated with those regions is through dedicated logic
> known as the HDM decoder. In order to allow the OS to properly program
> the HDMs, the HDM decoders must be modeled.
>
> There are two ways the HDM decoders can be implemented, the legacy
> mechanism is through the PCIe DVSEC programming from CXL 1.1 (8.1.3.8),
> and MMIO is found in 8.2.5.12 of the spec. For now, 8.1.3.8 is not
> implemented.
>
> Much of CXL device logic is implemented in cxl-utils. The HDM decoder
> however is implemented directly by the device implementation.
> Whilst the implementation currently does no validity checks on the
> encoder set up, future work will add sanity checking specific to
> the type of cxl component.
>
> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
>  hw/mem/cxl_type3.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
>
> diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> index c4021d2434..da091157f2 100644
> --- a/hw/mem/cxl_type3.c
> +++ b/hw/mem/cxl_type3.c
> @@ -61,6 +61,56 @@ static void build_dvsecs(CXLType3Dev *ct3d)
>                                 REG_LOC_DVSEC_REVID, dvsec);
>  }
>  
> +static void hdm_decoder_commit(CXLType3Dev *ct3d, int which)
> +{
> +    ComponentRegisters *cregs = &ct3d->cxl_cstate.crb;
> +    uint32_t *cache_mem = cregs->cache_mem_registers;
> +
> +    assert(which == 0);
> +
> +    /* TODO: Sanity checks that the decoder is possible */
> +    ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
> +    ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, ERR, 0);
> +
> +    ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
> +}
> +
> +static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
> +                           unsigned size)
> +{
> +    CXLComponentState *cxl_cstate = opaque;
> +    ComponentRegisters *cregs = &cxl_cstate->crb;
> +    CXLType3Dev *ct3d = container_of(cxl_cstate, CXLType3Dev, cxl_cstate);
> +    uint32_t *cache_mem = cregs->cache_mem_registers;
> +    bool should_commit = false;
> +    int which_hdm = -1;
> +
> +    assert(size == 4);

Maybe add:

      g_assert(offset <= (CXL2_COMPONENT_CM_REGION_SIZE >> 2));


> +
> +    switch (offset) {
> +    case A_CXL_HDM_DECODER0_CTRL:
> +        should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
> +        which_hdm = 0;
> +        break;
> +    default:
> +        break;
> +    }
> +
> +    stl_le_p((uint8_t *)cache_mem + offset, value);
> +    if (should_commit) {
> +        hdm_decoder_commit(ct3d, which_hdm);
> +    }
> +}
> +
> +static void ct3_finalize(Object *obj)
> +{
> +    CXLType3Dev *ct3d = CT3(obj);
> +    CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
> +    ComponentRegisters *regs = &cxl_cstate->crb;
> +
> +    g_free((void *)regs->special_ops);

nit: you don't need to cast her.

> +}
> +
>  static void cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
>  {
>      MemoryRegion *mr;
> @@ -103,6 +153,9 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
>      ct3d->cxl_cstate.pdev = pci_dev;
>      build_dvsecs(ct3d);
>  
> +    regs->special_ops = g_new0(MemoryRegionOps, 1);
> +    regs->special_ops->write = ct3d_reg_write;
> +
>      cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
>                                        TYPE_CXL_TYPE3_DEV);
>  
> @@ -155,6 +208,7 @@ static const TypeInfo ct3d_info = {
>      .parent = TYPE_PCI_DEVICE,
>      .class_init = ct3_class_init,
>      .instance_size = sizeof(CXLType3Dev),
> +    .instance_finalize = ct3_finalize,
>      .interfaces = (InterfaceInfo[]) {
>          { INTERFACE_CXL_DEVICE },
>          { INTERFACE_PCIE_DEVICE },

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

-- 
Alex Bennée