[PATCH v2 00/13] MIPS: add support for the Microsemi MIPS SoCs

[PATCH v2 00/13] MIPS: add support for the Microsemi MIPS SoCs

[Alexandre Belloni]

Hi,

This patch series adds initial support for the Microsemi MIPS SoCs. It
is currently focusing on the Microsemi Ocelot (VSC7513, VSC7514).

It adds support for the IRQ controller, pinmux and gpio controller and
reset control.

This produces a kernel that can boot to the console.

This is a single series for reference but it can also be taken
separately by each maintainer as each drivers are independant.

Changes in v2:
 - removed the wildcard in MAINAINERS
 - corrected the Cc list
 - added proper documentation for both syscons
 - removed the mscc,cpucontrol property
 - updated the ranges property in the ocelot dtsi

Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org


Alexandre Belloni (13):
  dt-bindings: Add vendor prefix for Microsemi Corporation
  dt-bindings: interrupt-controller: Add binding for the Microsemi
    Ocelot interrupt controller
  irqchip: Add a driver for the Microsemi Ocelot controller
  dt-bindings: pinctrl: Add bindings for Microsemi Ocelot
  pinctrl: Add Microsemi Ocelot SoC driver
  dt-bindings: mips: Add bindings for Microsemi SoCs
  dt-bindings: power: reset: Document ocelot-reset binding
  power: reset: Add a driver for the Microsemi Ocelot reset
  MIPS: mscc: Add initial support for Microsemi MIPS SoCs
  MIPS: mscc: add ocelot dtsi
  MIPS: mscc: add ocelot PCB123 device tree
  MIPS: defconfigs: add a defconfig for Microsemi SoCs
  MAINTAINERS: Add entry for Microsemi MIPS SoCs

 .../interrupt-controller/mscc,ocelot-icpu-intr.txt |  22 +
 Documentation/devicetree/bindings/mips/mscc.txt    |  46 ++
 .../bindings/pinctrl/mscc,ocelot-pinctrl.txt       |  39 ++
 .../bindings/power/reset/ocelot-reset.txt          |  17 +
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 MAINTAINERS                                        |   7 +
 arch/mips/Kbuild.platforms                         |   1 +
 arch/mips/Kconfig                                  |  24 +
 arch/mips/boot/dts/Makefile                        |   1 +
 arch/mips/boot/dts/mscc/Makefile                   |   6 +
 arch/mips/boot/dts/mscc/ocelot.dtsi                | 115 +++++
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts          |  27 ++
 arch/mips/configs/mscc_defconfig                   |  84 ++++
 arch/mips/mscc/Makefile                            |  11 +
 arch/mips/mscc/Platform                            |  12 +
 arch/mips/mscc/setup.c                             | 106 +++++
 drivers/irqchip/Kconfig                            |   5 +
 drivers/irqchip/Makefile                           |   1 +
 drivers/irqchip/irq-mscc-ocelot.c                  | 109 +++++
 drivers/pinctrl/Kconfig                            |  10 +
 drivers/pinctrl/Makefile                           |   1 +
 drivers/pinctrl/pinctrl-ocelot.c                   | 505 +++++++++++++++++++++
 drivers/power/reset/Kconfig                        |   7 +
 drivers/power/reset/Makefile                       |   1 +
 drivers/power/reset/ocelot-reset.c                 |  86 ++++
 25 files changed, 1244 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
 create mode 100644 Documentation/devicetree/bindings/mips/mscc.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
 create mode 100644 arch/mips/boot/dts/mscc/Makefile
 create mode 100644 arch/mips/boot/dts/mscc/ocelot.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts
 create mode 100644 arch/mips/configs/mscc_defconfig
 create mode 100644 arch/mips/mscc/Makefile
 create mode 100644 arch/mips/mscc/Platform
 create mode 100644 arch/mips/mscc/setup.c
 create mode 100644 drivers/irqchip/irq-mscc-ocelot.c
 create mode 100644 drivers/pinctrl/pinctrl-ocelot.c
 create mode 100644 drivers/power/reset/ocelot-reset.c

-- 
2.15.1

[PATCH v2 06/13] dt-bindings: mips: Add bindings for Microsemi SoCs

[Alexandre Belloni]

Add bindings for Microsemi SoCs. Currently only Ocelot is supported.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 Documentation/devicetree/bindings/mips/mscc.txt | 46 +++++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mips/mscc.txt

diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt
new file mode 100644
index 000000000000..1bb578b9d135
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/mscc.txt
@@ -0,0 +1,46 @@
+* Microsemi MIPS CPUs
+
+Boards with a SoC of the Microsemi MIPS family shall have the following
+properties:
+
+Required properties:
+- compatible: "mscc,ocelot"
+- mips-hpt-frequency: CPU counter frequency.
+
+
+* Other peripherals:
+
+o CPU chip regs:
+
+The SoC has a few registers (DEVCPU_GCB:CHIP_REGS) handling miscellaneous
+functionalities: chip ID, general purpose register for software use, reset
+controller, hardware status and configuration, efuses.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-chip-regs", "simple-mfd", "syscon"
+- reg : Should contain registers location and length
+
+Example:
+	syscon@71070000 {
+		compatible = "mscc,ocelot-chip-regs", "simple-mfd", "syscon";
+		reg = <0x71070000 0x1c>;
+	};
+
+
+o CPU system control:
+
+The SoC has a few registers (ICPU_CFG:CPU_SYSTEM_CTRL) handling configuration of
+the CPU: 8 general purpose registers, reset control, CPU en/disabling, CPU
+endianess, CPU bus control, CPU status.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-cpu-syscon", "syscon"
+- reg : Should contain registers location and length
+
+Example:
+	syscon@70000000 {
+		compatible = "mscc,ocelot-cpu-syscon", "syscon";
+		reg = <0x70000000 0x2c>;
+	};
+
+
-- 
2.15.1

[PATCH v2 07/13] dt-bindings: power: reset: Document ocelot-reset binding

[Alexandre Belloni]

Add binding documentation for the Microsemi Ocelot reset block.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 .../devicetree/bindings/power/reset/ocelot-reset.txt    | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/ocelot-reset.txt

diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
new file mode 100644
index 000000000000..1bcf276b04cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
@@ -0,0 +1,17 @@
+Microsemi Ocelot reset controller
+
+The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
+SoC MIPS core.
+
+Required Properties:
+ - compatible: "mscc,ocelot-chip-reset"
+
+Example:
+	syscon@71070000 {
+		compatible = "mscc,ocelot-chip-regs", "simple-mfd", "syscon";
+		reg = <0x71070000 0x1c>;
+
+		reset {
+			compatible = "mscc,ocelot-chip-reset";
+		};
+	};
-- 
2.15.1

Re: [PATCH v2 06/13] dt-bindings: mips: Add bindings for Microsemi SoCs

[Rob Herring]

On Fri, Dec 08, 2017 at 04:46:11PM +0100, Alexandre Belloni wrote:
> Add bindings for Microsemi SoCs. Currently only Ocelot is supported.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>  Documentation/devicetree/bindings/mips/mscc.txt | 46 +++++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mips/mscc.txt

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 07/13] dt-bindings: power: reset: Document ocelot-reset binding

[Rob Herring]

On Fri, Dec 08, 2017 at 04:46:12PM +0100, Alexandre Belloni wrote:
> Add binding documentation for the Microsemi Ocelot reset block.
> 
> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Signed-off-by: Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> ---
>  .../devicetree/bindings/power/reset/ocelot-reset.txt    | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
> 
> diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
> new file mode 100644
> index 000000000000..1bcf276b04cb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
> @@ -0,0 +1,17 @@
> +Microsemi Ocelot reset controller
> +
> +The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
> +SoC MIPS core.
> +
> +Required Properties:
> + - compatible: "mscc,ocelot-chip-reset"
> +
> +Example:
> +	syscon@71070000 {
> +		compatible = "mscc,ocelot-chip-regs", "simple-mfd", "syscon";
> +		reg = <0x71070000 0x1c>;
> +
> +		reset {
> +			compatible = "mscc,ocelot-chip-reset";

Why do you need a subnode here other than as a way to instantiate a 
driver? Can you describe the SOFT_RST register in reg property here 
(without having overlapping regions)?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 07/13] dt-bindings: power: reset: Document ocelot-reset binding

[Alexandre Belloni]

On 15/12/2017 at 14:23:32 -0600, Rob Herring wrote:
> On Fri, Dec 08, 2017 at 04:46:12PM +0100, Alexandre Belloni wrote:
> > Add binding documentation for the Microsemi Ocelot reset block.
> > 
> > Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> > Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> > Cc: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> > Cc: linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> > Signed-off-by: Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> > ---
> >  .../devicetree/bindings/power/reset/ocelot-reset.txt    | 17 +++++++++++++++++
> >  1 file changed, 17 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
> > new file mode 100644
> > index 000000000000..1bcf276b04cb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
> > @@ -0,0 +1,17 @@
> > +Microsemi Ocelot reset controller
> > +
> > +The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
> > +SoC MIPS core.
> > +
> > +Required Properties:
> > + - compatible: "mscc,ocelot-chip-reset"
> > +
> > +Example:
> > +	syscon@71070000 {
> > +		compatible = "mscc,ocelot-chip-regs", "simple-mfd", "syscon";
> > +		reg = <0x71070000 0x1c>;
> > +
> > +		reset {
> > +			compatible = "mscc,ocelot-chip-reset";
> 
> Why do you need a subnode here other than as a way to instantiate a 
> driver? Can you describe the SOFT_RST register in reg property here 
> (without having overlapping regions)?

You mean like:

reset@7107001c {
	compatible = "mscc,ocelot-chip-reset";
	reg = <0x7107001c 0x4>;
};

I guess that could work.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 00/13] MIPS: add support for the Microsemi MIPS SoCs

[PrasannaKumar Muralidharan]

Hi Alexandre,

With very small amount of code in arch/mips this series looks really nice.

On 8 December 2017 at 21:16, Alexandre Belloni
<alexandre.belloni@free-electrons.com> wrote:
> Hi,
>
> This patch series adds initial support for the Microsemi MIPS SoCs. It
> is currently focusing on the Microsemi Ocelot (VSC7513, VSC7514).
>
> It adds support for the IRQ controller, pinmux and gpio controller and
> reset control.
>
> This produces a kernel that can boot to the console.
>
> This is a single series for reference but it can also be taken
> separately by each maintainer as each drivers are independant.
>
> Changes in v2:
>  - removed the wildcard in MAINAINERS
>  - corrected the Cc list
>  - added proper documentation for both syscons
>  - removed the mscc,cpucontrol property
>  - updated the ranges property in the ocelot dtsi
>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: linux-gpio@vger.kernel.org
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: linux-pm@vger.kernel.org
>
>
> Alexandre Belloni (13):
>   dt-bindings: Add vendor prefix for Microsemi Corporation
>   dt-bindings: interrupt-controller: Add binding for the Microsemi
>     Ocelot interrupt controller
>   irqchip: Add a driver for the Microsemi Ocelot controller
>   dt-bindings: pinctrl: Add bindings for Microsemi Ocelot
>   pinctrl: Add Microsemi Ocelot SoC driver
>   dt-bindings: mips: Add bindings for Microsemi SoCs
>   dt-bindings: power: reset: Document ocelot-reset binding
>   power: reset: Add a driver for the Microsemi Ocelot reset
>   MIPS: mscc: Add initial support for Microsemi MIPS SoCs
>   MIPS: mscc: add ocelot dtsi
>   MIPS: mscc: add ocelot PCB123 device tree
>   MIPS: defconfigs: add a defconfig for Microsemi SoCs
>   MAINTAINERS: Add entry for Microsemi MIPS SoCs
>
>  .../interrupt-controller/mscc,ocelot-icpu-intr.txt |  22 +
>  Documentation/devicetree/bindings/mips/mscc.txt    |  46 ++
>  .../bindings/pinctrl/mscc,ocelot-pinctrl.txt       |  39 ++
>  .../bindings/power/reset/ocelot-reset.txt          |  17 +
>  .../devicetree/bindings/vendor-prefixes.txt        |   1 +
>  MAINTAINERS                                        |   7 +
>  arch/mips/Kbuild.platforms                         |   1 +
>  arch/mips/Kconfig                                  |  24 +
>  arch/mips/boot/dts/Makefile                        |   1 +
>  arch/mips/boot/dts/mscc/Makefile                   |   6 +
>  arch/mips/boot/dts/mscc/ocelot.dtsi                | 115 +++++
>  arch/mips/boot/dts/mscc/ocelot_pcb123.dts          |  27 ++
>  arch/mips/configs/mscc_defconfig                   |  84 ++++
>  arch/mips/mscc/Makefile                            |  11 +
>  arch/mips/mscc/Platform                            |  12 +
>  arch/mips/mscc/setup.c                             | 106 +++++
>  drivers/irqchip/Kconfig                            |   5 +
>  drivers/irqchip/Makefile                           |   1 +
>  drivers/irqchip/irq-mscc-ocelot.c                  | 109 +++++
>  drivers/pinctrl/Kconfig                            |  10 +
>  drivers/pinctrl/Makefile                           |   1 +
>  drivers/pinctrl/pinctrl-ocelot.c                   | 505 +++++++++++++++++++++
>  drivers/power/reset/Kconfig                        |   7 +
>  drivers/power/reset/Makefile                       |   1 +
>  drivers/power/reset/ocelot-reset.c                 |  86 ++++
>  25 files changed, 1244 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
>  create mode 100644 Documentation/devicetree/bindings/mips/mscc.txt
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
>  create mode 100644 Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
>  create mode 100644 arch/mips/boot/dts/mscc/Makefile
>  create mode 100644 arch/mips/boot/dts/mscc/ocelot.dtsi
>  create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts
>  create mode 100644 arch/mips/configs/mscc_defconfig
>  create mode 100644 arch/mips/mscc/Makefile
>  create mode 100644 arch/mips/mscc/Platform
>  create mode 100644 arch/mips/mscc/setup.c
>  create mode 100644 drivers/irqchip/irq-mscc-ocelot.c
>  create mode 100644 drivers/pinctrl/pinctrl-ocelot.c
>  create mode 100644 drivers/power/reset/ocelot-reset.c
>
> --
> 2.15.1
>
>

Except for irqchip driver and pinctrl driver other parts of the series is
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>

Regards,
PrasannaKumar