* [PATCH 1/3] ARM: dts: sun4i: The blue led on the Mele A1000 is a power led @ 2016-06-05 12:23 Hans de Goede [not found] ` <1465129393-22379-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: Hans de Goede @ 2016-06-05 12:23 UTC (permalink / raw) To: Chen-Yu Tsai, Maxime Ripard Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, Hans de Goede The blue led on the Mele A1000 is wired to light up as soon as the board has powered (it will be on while the gpio is still in input / floating mode), also its location on the top-set box clearly signals "power led". Until now we've been treating this as a generic usr function led, which means that when you plug power into the top-set box, the power-led lights and then turns off as soon as the kernel loads, which looks wrong. This renames the led from a1000:blue:usr to a1000:blue:pwr and marks it as default on, fixing this. Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- arch/arm/boot/dts/sun4i-a10-a1000.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index fa70b8f..39e368e 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -72,8 +72,9 @@ }; blue { - label = "a1000:blue:usr"; + label = "a1000:blue:pwr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 11+ messages in thread
[parent not found: <1465129393-22379-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* [PATCH 2/3] ARM: dts: sun6i: The blue led on the Mele A1000G quad is a power led [not found] ` <1465129393-22379-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> @ 2016-06-05 12:23 ` Hans de Goede [not found] ` <1465129393-22379-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-06-05 12:23 ` [PATCH 3/3] ARM: dts: sun6i: The blue led on the Mele M9 " Hans de Goede ` (2 subsequent siblings) 3 siblings, 1 reply; 11+ messages in thread From: Hans de Goede @ 2016-06-05 12:23 UTC (permalink / raw) To: Chen-Yu Tsai, Maxime Ripard Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, Hans de Goede The blue led on the Mele A1000 is wired to light up as soon as the board has powered (it will be on while the gpio is still in input / floating mode), also its location on the top-set box clearly signals "power led". Until now we've been treating this as a generic usr function led, which means that when you plug power into the top-set box, the power-led lights and then turns off as soon as the kernel loads, which looks wrong. This renames the led from m9:blue:usr to a1000g:blue:pwr (fixing a copy and paste error in the prefix while at it) and marks it as default on, fixing this. Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index 4dd70cc..e063dab 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -65,8 +65,9 @@ pinctrl-0 = <&led_pins_m9>; blue { - label = "m9:blue:usr"; + label = "a1000g:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 11+ messages in thread
[parent not found: <1465129393-22379-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH 2/3] ARM: dts: sun6i: The blue led on the Mele A1000G quad is a power led [not found] ` <1465129393-22379-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> @ 2016-06-06 7:01 ` Chen-Yu Tsai 0 siblings, 0 replies; 11+ messages in thread From: Chen-Yu Tsai @ 2016-06-06 7:01 UTC (permalink / raw) To: Hans de Goede; +Cc: Chen-Yu Tsai, Maxime Ripard, linux-arm-kernel, devicetree On Sun, Jun 5, 2016 at 8:23 PM, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote: > The blue led on the Mele A1000 is wired to light up as soon as the board > has powered (it will be on while the gpio is still in input / floating > mode), also its location on the top-set box clearly signals "power led". > > Until now we've been treating this as a generic usr function led, which > means that when you plug power into the top-set box, the power-led lights > and then turns off as soon as the kernel loads, which looks wrong. > > This renames the led from m9:blue:usr to a1000g:blue:pwr (fixing a copy > and paste error in the prefix while at it) and marks it as default on, > fixing this. > > Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 3/3] ARM: dts: sun6i: The blue led on the Mele M9 is a power led [not found] ` <1465129393-22379-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-06-05 12:23 ` [PATCH 2/3] ARM: dts: sun6i: The blue led on the Mele A1000G quad " Hans de Goede @ 2016-06-05 12:23 ` Hans de Goede [not found] ` <1465129393-22379-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-06-06 7:01 ` [PATCH 1/3] ARM: dts: sun4i: The blue led on the Mele A1000 " Chen-Yu Tsai 2016-06-07 21:24 ` Maxime Ripard 3 siblings, 1 reply; 11+ messages in thread From: Hans de Goede @ 2016-06-05 12:23 UTC (permalink / raw) To: Chen-Yu Tsai, Maxime Ripard Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, Hans de Goede The blue led on the Mele M9 is wired to light up as soon as the board has powered (it will be on while the gpio is still in input / floating mode), also its location on the top-set box clearly signals "power led". Until now we've been treating this as a generic usr function led, which means that when you plug power into the top-set box, the power-led lights and then turns off as soon as the kernel loads, which looks wrong. This renames the led from m9:blue:usr to m9:blue:pwr and marks it as default on, fixing this. Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- arch/arm/boot/dts/sun6i-a31-m9.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 6e0e5687..66d29b8 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -65,8 +65,9 @@ pinctrl-0 = <&led_pins_m9>; blue { - label = "m9:blue:usr"; + label = "m9:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 11+ messages in thread
[parent not found: <1465129393-22379-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH 3/3] ARM: dts: sun6i: The blue led on the Mele M9 is a power led [not found] ` <1465129393-22379-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> @ 2016-06-06 7:02 ` Chen-Yu Tsai 0 siblings, 0 replies; 11+ messages in thread From: Chen-Yu Tsai @ 2016-06-06 7:02 UTC (permalink / raw) To: Hans de Goede; +Cc: Chen-Yu Tsai, Maxime Ripard, linux-arm-kernel, devicetree On Sun, Jun 5, 2016 at 8:23 PM, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote: > The blue led on the Mele M9 is wired to light up as soon as the board > has powered (it will be on while the gpio is still in input / floating > mode), also its location on the top-set box clearly signals "power led". > > Until now we've been treating this as a generic usr function led, which > means that when you plug power into the top-set box, the power-led lights > and then turns off as soon as the kernel loads, which looks wrong. > > This renames the led from m9:blue:usr to m9:blue:pwr and marks > it as default on, fixing this. > > Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/3] ARM: dts: sun4i: The blue led on the Mele A1000 is a power led [not found] ` <1465129393-22379-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-06-05 12:23 ` [PATCH 2/3] ARM: dts: sun6i: The blue led on the Mele A1000G quad " Hans de Goede 2016-06-05 12:23 ` [PATCH 3/3] ARM: dts: sun6i: The blue led on the Mele M9 " Hans de Goede @ 2016-06-06 7:01 ` Chen-Yu Tsai [not found] ` <CAGb2v66iYcOCSbX6Q9OLFYaaCpzqRC94v+OXfd8gcD7GG1eZRg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2016-06-07 21:24 ` Maxime Ripard 3 siblings, 1 reply; 11+ messages in thread From: Chen-Yu Tsai @ 2016-06-06 7:01 UTC (permalink / raw) To: Hans de Goede; +Cc: Chen-Yu Tsai, Maxime Ripard, linux-arm-kernel, devicetree On Sun, Jun 5, 2016 at 8:23 PM, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote: > The blue led on the Mele A1000 is wired to light up as soon as the board > has powered (it will be on while the gpio is still in input / floating > mode), also its location on the top-set box clearly signals "power led". > > Until now we've been treating this as a generic usr function led, which > means that when you plug power into the top-set box, the power-led lights > and then turns off as soon as the kernel loads, which looks wrong. > > This renames the led from a1000:blue:usr to a1000:blue:pwr and marks > it as default on, fixing this. > > Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <CAGb2v66iYcOCSbX6Q9OLFYaaCpzqRC94v+OXfd8gcD7GG1eZRg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH 1/3] ARM: dts: sun4i: The blue led on the Mele A1000 is a power led [not found] ` <CAGb2v66iYcOCSbX6Q9OLFYaaCpzqRC94v+OXfd8gcD7GG1eZRg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2016-06-06 7:05 ` Chen-Yu Tsai [not found] ` <CAGb2v66nnStG-JUwgPpiSsde0kbfeL5m-OfpmDNornhiMrhm7A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: Chen-Yu Tsai @ 2016-06-06 7:05 UTC (permalink / raw) To: Hans de Goede; +Cc: Maxime Ripard, Chen-Yu Tsai, linux-arm-kernel, devicetree On Mon, Jun 6, 2016 at 3:01 PM, Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> wrote: > On Sun, Jun 5, 2016 at 8:23 PM, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote: >> The blue led on the Mele A1000 is wired to light up as soon as the board >> has powered (it will be on while the gpio is still in input / floating >> mode), also its location on the top-set box clearly signals "power led". >> >> Until now we've been treating this as a generic usr function led, which >> means that when you plug power into the top-set box, the power-led lights >> and then turns off as soon as the kernel loads, which looks wrong. >> >> This renames the led from a1000:blue:usr to a1000:blue:pwr and marks >> it as default on, fixing this. >> >> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> > > Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> BTW, the kernel now supports using an LED as a panic indicator. Would it be useful to use the power LED for this? ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <CAGb2v66nnStG-JUwgPpiSsde0kbfeL5m-OfpmDNornhiMrhm7A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH 1/3] ARM: dts: sun4i: The blue led on the Mele A1000 is a power led [not found] ` <CAGb2v66nnStG-JUwgPpiSsde0kbfeL5m-OfpmDNornhiMrhm7A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2016-06-06 7:24 ` Hans de Goede 0 siblings, 0 replies; 11+ messages in thread From: Hans de Goede @ 2016-06-06 7:24 UTC (permalink / raw) To: Chen-Yu Tsai; +Cc: Maxime Ripard, linux-arm-kernel, devicetree Hi, On 06-06-16 09:05, Chen-Yu Tsai wrote: > On Mon, Jun 6, 2016 at 3:01 PM, Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> wrote: >> On Sun, Jun 5, 2016 at 8:23 PM, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote: >>> The blue led on the Mele A1000 is wired to light up as soon as the board >>> has powered (it will be on while the gpio is still in input / floating >>> mode), also its location on the top-set box clearly signals "power led". >>> >>> Until now we've been treating this as a generic usr function led, which >>> means that when you plug power into the top-set box, the power-led lights >>> and then turns off as soon as the kernel loads, which looks wrong. >>> >>> This renames the led from a1000:blue:usr to a1000:blue:pwr and marks >>> it as default on, fixing this. >>> >>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> >> >> Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> > > BTW, the kernel now supports using an LED as a panic indicator. > Would it be useful to use the power LED for this? Maybe I'm not 100% sure either way. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/3] ARM: dts: sun4i: The blue led on the Mele A1000 is a power led [not found] ` <1465129393-22379-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> ` (2 preceding siblings ...) 2016-06-06 7:01 ` [PATCH 1/3] ARM: dts: sun4i: The blue led on the Mele A1000 " Chen-Yu Tsai @ 2016-06-07 21:24 ` Maxime Ripard 2016-06-08 13:23 ` Hans de Goede 3 siblings, 1 reply; 11+ messages in thread From: Maxime Ripard @ 2016-06-07 21:24 UTC (permalink / raw) To: Hans de Goede Cc: Chen-Yu Tsai, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree [-- Attachment #1: Type: text/plain, Size: 960 bytes --] On Sun, Jun 05, 2016 at 02:23:11PM +0200, Hans de Goede wrote: > The blue led on the Mele A1000 is wired to light up as soon as the board > has powered (it will be on while the gpio is still in input / floating > mode), also its location on the top-set box clearly signals "power led". > > Until now we've been treating this as a generic usr function led, which > means that when you plug power into the top-set box, the power-led lights > and then turns off as soon as the kernel loads, which looks wrong. I'm not sure I understand the relationship between usr vs pwr led and the fact that it's disabled. > This renames the led from a1000:blue:usr to a1000:blue:pwr and marks > it as default on, fixing this. however, the default on might. Is it just a confusing commit log, or am I overlooking something? thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/3] ARM: dts: sun4i: The blue led on the Mele A1000 is a power led 2016-06-07 21:24 ` Maxime Ripard @ 2016-06-08 13:23 ` Hans de Goede [not found] ` <0acb666e-3fa7-fb10-4c0d-1d7990f9eaa6-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: Hans de Goede @ 2016-06-08 13:23 UTC (permalink / raw) To: Maxime Ripard Cc: Chen-Yu Tsai, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree Hi, On 07-06-16 23:24, Maxime Ripard wrote: > On Sun, Jun 05, 2016 at 02:23:11PM +0200, Hans de Goede wrote: >> The blue led on the Mele A1000 is wired to light up as soon as the board >> has powered (it will be on while the gpio is still in input / floating >> mode), also its location on the top-set box clearly signals "power led". >> >> Until now we've been treating this as a generic usr function led, which >> means that when you plug power into the top-set box, the power-led lights >> and then turns off as soon as the kernel loads, which looks wrong. > > I'm not sure I understand the relationship between usr vs pwr led and > the fact that it's disabled. There is no relation, other then that pwr leds typically have default-state = "on"; set whereas usr leds do not. >> This renames the led from a1000:blue:usr to a1000:blue:pwr and marks >> it as default on, fixing this. > > however, the default on might. Is it just a confusing commit log, or > am I overlooking something? Just a slightly confusing commit log. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <0acb666e-3fa7-fb10-4c0d-1d7990f9eaa6-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH 1/3] ARM: dts: sun4i: The blue led on the Mele A1000 is a power led [not found] ` <0acb666e-3fa7-fb10-4c0d-1d7990f9eaa6-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> @ 2016-06-11 15:45 ` Maxime Ripard 0 siblings, 0 replies; 11+ messages in thread From: Maxime Ripard @ 2016-06-11 15:45 UTC (permalink / raw) To: Hans de Goede Cc: Chen-Yu Tsai, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree [-- Attachment #1: Type: text/plain, Size: 1304 bytes --] On Wed, Jun 08, 2016 at 03:23:31PM +0200, Hans de Goede wrote: > Hi, > > On 07-06-16 23:24, Maxime Ripard wrote: > >On Sun, Jun 05, 2016 at 02:23:11PM +0200, Hans de Goede wrote: > >>The blue led on the Mele A1000 is wired to light up as soon as the board > >>has powered (it will be on while the gpio is still in input / floating > >>mode), also its location on the top-set box clearly signals "power led". > >> > >>Until now we've been treating this as a generic usr function led, which > >>means that when you plug power into the top-set box, the power-led lights > >>and then turns off as soon as the kernel loads, which looks wrong. > > > >I'm not sure I understand the relationship between usr vs pwr led and > >the fact that it's disabled. > > There is no relation, other then that pwr leds typically have > default-state = "on"; set whereas usr leds do not. > > >>This renames the led from a1000:blue:usr to a1000:blue:pwr and marks > >>it as default on, fixing this. > > > >however, the default on might. Is it just a confusing commit log, or > >am I overlooking something? > > Just a slightly confusing commit log. Ok, applied all three. Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2016-06-11 15:45 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-06-05 12:23 [PATCH 1/3] ARM: dts: sun4i: The blue led on the Mele A1000 is a power led Hans de Goede [not found] ` <1465129393-22379-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-06-05 12:23 ` [PATCH 2/3] ARM: dts: sun6i: The blue led on the Mele A1000G quad " Hans de Goede [not found] ` <1465129393-22379-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-06-06 7:01 ` Chen-Yu Tsai 2016-06-05 12:23 ` [PATCH 3/3] ARM: dts: sun6i: The blue led on the Mele M9 " Hans de Goede [not found] ` <1465129393-22379-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-06-06 7:02 ` Chen-Yu Tsai 2016-06-06 7:01 ` [PATCH 1/3] ARM: dts: sun4i: The blue led on the Mele A1000 " Chen-Yu Tsai [not found] ` <CAGb2v66iYcOCSbX6Q9OLFYaaCpzqRC94v+OXfd8gcD7GG1eZRg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2016-06-06 7:05 ` Chen-Yu Tsai [not found] ` <CAGb2v66nnStG-JUwgPpiSsde0kbfeL5m-OfpmDNornhiMrhm7A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2016-06-06 7:24 ` Hans de Goede 2016-06-07 21:24 ` Maxime Ripard 2016-06-08 13:23 ` Hans de Goede [not found] ` <0acb666e-3fa7-fb10-4c0d-1d7990f9eaa6-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-06-11 15:45 ` Maxime Ripard
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).