Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
From: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
To: jic23@kernel.org, linux-iio@vger.kernel.org
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Subject: [PATCH 13/13] iio: imu: inv_mpu6050: temperature only work with accel/gyro
Date: Wed, 12 Feb 2020 18:40:48 +0100
Message-ID: <20200212174048.1034-14-jmaneyrol@invensense.com> (raw)
In-Reply-To: <20200212174048.1034-1-jmaneyrol@invensense.com>

Temperature sensor works correctly only when accel and/or gyro
is turned on. Prevent polling value if they are not running.
Anyway it doesn't make sense to use it without sensor engines
on.

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index f698d2aa61f4..3212030cc083 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -597,6 +597,11 @@ static int inv_mpu6050_read_channel_data(struct iio_dev *indio_dev,
 					      chan->channel2, val);
 		break;
 	case IIO_TEMP:
+		/* temperature sensor work only with accel and/or gyro */
+		if (!st->chip_config.accl_en && !st->chip_config.gyro_en) {
+			result = -ENOTSUPP;
+			goto error_power_off;
+		}
 		if (!st->chip_config.temp_en) {
 			result = inv_mpu6050_switch_engine(st, true,
 					INV_MPU6050_SENSOR_TEMP);
-- 
2.17.1


  parent reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-12 17:40 [PATCH 00/13] Rework sensors engines and power management Jean-Baptiste Maneyrol
2020-02-12 17:40 ` [PATCH 01/13] iio: imu: inv_mpu6050: enable i2c aux mux bypass only once Jean-Baptiste Maneyrol
2020-02-15 17:30   ` Jonathan Cameron
2020-02-18 16:03     ` Jean-Baptiste Maneyrol
2020-02-12 17:40 ` [PATCH 02/13] iio: imu: inv_mpu6050: delete useless check Jean-Baptiste Maneyrol
2020-02-12 17:40 ` [PATCH 03/13] iio: imu: inv_mpu6050: set power on/off only once during all init Jean-Baptiste Maneyrol
2020-02-12 17:40 ` [PATCH 04/13] iio: imu: inv_mpu6050: simplify polling magnetometer Jean-Baptiste Maneyrol
2020-02-12 17:40 ` [PATCH 05/13] iio: imu: inv_mpu6050: early init of chip_config for use at setup Jean-Baptiste Maneyrol
2020-02-12 17:40 ` [PATCH 06/13] iio: imu: inv_mpu6050: add all signal path resets at init Jean-Baptiste Maneyrol
2020-02-12 17:40 ` [PATCH 07/13] iio: imu: inv_mpu6050: fix sleep time when turning regulators on Jean-Baptiste Maneyrol
2020-02-12 17:40 ` [PATCH 08/13] iio: imu: inv_mpu6050: rewrite power and engine management Jean-Baptiste Maneyrol
2020-02-15 18:09   ` Jonathan Cameron
2020-02-12 17:40 ` [PATCH 09/13] iio: imu: inv_mpu6050: fix data polling interface Jean-Baptiste Maneyrol
2020-02-12 17:40 ` [PATCH 10/13] iio: imu: inv_mpu6050: factorize fifo enable/disable Jean-Baptiste Maneyrol
2020-02-12 17:40 ` [PATCH 11/13] iio: imu: inv_mpu6050: dynamic sampling rate change Jean-Baptiste Maneyrol
2020-02-12 17:40 ` [PATCH 12/13] iio: imu: inv_mpu6050: use runtime pm with autosuspend Jean-Baptiste Maneyrol
2020-02-15 18:22   ` Jonathan Cameron
2020-02-18 16:44     ` Jean-Baptiste Maneyrol
2020-02-12 17:40 ` Jean-Baptiste Maneyrol [this message]
2020-02-15 18:23   ` [PATCH 13/13] iio: imu: inv_mpu6050: temperature only work with accel/gyro Jonathan Cameron
2020-02-18 16:46     ` Jean-Baptiste Maneyrol

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200212174048.1034-14-jmaneyrol@invensense.com \
    --to=jmaneyrol@invensense.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git