[PATCH 19/25] media: ov5647: Implement set_fmt pad operation

[Jacopo Mondi <jacopo@jmondi.org>]

Now that the driver supports more than a single mode, implement the
.set_fmt pad operation and adjust the existing .get_fmt one to report
the currently applied format.

Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
---
 drivers/media/i2c/ov5647.c | 67 +++++++++++++++++++++++++++++++++++---
 1 file changed, 62 insertions(+), 5 deletions(-)

diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index af9e6d43967d8..39e320f321bd8 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -1016,15 +1016,72 @@ static int ov5647_enum_frame_size(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static int ov5647_set_get_fmt(struct v4l2_subdev *sd,
+static int ov5647_get_pad_fmt(struct v4l2_subdev *sd,
 			      struct v4l2_subdev_pad_config *cfg,
 			      struct v4l2_subdev_format *format)
 {
 	struct v4l2_mbus_framefmt *fmt = &format->format;
+	struct v4l2_mbus_framefmt *sensor_format;
+	struct ov5647 *sensor = to_sensor(sd);
 
-	/* Only one format is supported, so return that. */
+	mutex_lock(&sensor->lock);
 	memset(fmt, 0, sizeof(*fmt));
-	*fmt = OV5647_DEFAULT_FORMAT;
+
+	switch (format->which) {
+	case V4L2_SUBDEV_FORMAT_TRY:
+		sensor_format = v4l2_subdev_get_try_format(sd, cfg, format->pad);
+		break;
+	default:
+		sensor_format = &sensor->mode->format;
+		break;
+	}
+
+	*fmt = *sensor_format;
+	mutex_unlock(&sensor->lock);
+
+	return 0;
+}
+
+static int ov5647_set_pad_fmt(struct v4l2_subdev *sd,
+			      struct v4l2_subdev_pad_config *cfg,
+			      struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *fmt = &format->format;
+	struct ov5647 *sensor = to_sensor(sd);
+	struct ov5647_mode *ov5647_mode_list;
+	struct ov5647_mode *mode;
+	unsigned int num_modes;
+
+	/*
+	 * Default mbus code MEDIA_BUS_FMT_SBGGR10_1X10 if the requested one
+	 * is not supported.
+	 */
+	if (fmt->code == MEDIA_BUS_FMT_SBGGR8_1X8) {
+		ov5647_mode_list = ov5647_sbggr8_modes;
+		num_modes = ARRAY_SIZE(ov5647_sbggr8_modes);
+	} else {
+		ov5647_mode_list = ov5647_sbggr10_modes;
+		num_modes = ARRAY_SIZE(ov5647_sbggr10_modes);
+	}
+
+	mode = v4l2_find_nearest_size(ov5647_mode_list, num_modes,
+				      format.width, format.height,
+				      fmt->width, fmt->height);
+
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+		mutex_lock(&sensor->lock);
+		*v4l2_subdev_get_try_format(sd, cfg, format->pad) = mode->format;
+		*fmt = mode->format;
+		mutex_unlock(&sensor->lock);
+
+		return 0;
+	}
+
+	/* Update the sensor mode and apply at it at streamon time. */
+	mutex_lock(&sensor->lock);
+	sensor->mode = mode;
+	*fmt = mode->format;
+	mutex_unlock(&sensor->lock);
 
 	return 0;
 }
@@ -1068,8 +1125,8 @@ static int ov5647_get_selection(struct v4l2_subdev *sd,
 static const struct v4l2_subdev_pad_ops ov5647_subdev_pad_ops = {
 	.enum_mbus_code		= ov5647_enum_mbus_code,
 	.enum_frame_size	= ov5647_enum_frame_size,
-	.set_fmt		= ov5647_set_get_fmt,
-	.get_fmt		= ov5647_set_get_fmt,
+	.set_fmt		= ov5647_set_pad_fmt,
+	.get_fmt		= ov5647_get_pad_fmt,
 	.get_selection		= ov5647_get_selection,
 };
 
-- 
2.27.0