Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Jacopo Mondi <jacopo@jmondi.org>
Cc: mchehab@kernel.org, hverkuil@xs4all.nl,
	laurent.pinchart@ideasonboard.com,
	roman.kovalivskyi@globallogic.com,
	dave.stevenson@raspberrypi.org, naush@raspberrypi.com,
	mrodin@de.adit-jv.com, hugues.fruchet@st.com, mripard@kernel.org,
	aford173@gmail.com, sudipi@jp.adit-jv.com,
	andrew_gabbasov@mentor.com, erosca@de.adit-jv.com,
	linux-media@vger.kernel.org, libcamera-devel@lists.libcamera.org
Subject: Re: [PATCH 15/25] media: ov5647: Break out format handling
Date: Fri, 31 Jul 2020 14:44:39 +0300
Message-ID: <20200731114439.GN13316@paasikivi.fi.intel.com> (raw)
In-Reply-To: <20200623164224.44476-5-jacopo@jmondi.org>

Hi Jacopo,

Btw. I've bounced the two DT binding patches to DT list + Rob. Please
remember that in v2 if there are changes.

On Tue, Jun 23, 2020 at 06:42:24PM +0200, Jacopo Mondi wrote:
> Break format handling out from the main driver structure.
> 
> This commit prepares for the introduction of more sensor formats and
> resolutions by instrumenting the existing operation to work on multiple
> modes instead of assuming a single one supported.
> 
> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
> ---
>  drivers/media/i2c/ov5647.c | 84 +++++++++++++++++++++++++++-----------
>  1 file changed, 61 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
> index 03f4f1a257ecd..a801ed0249aad 100644
> --- a/drivers/media/i2c/ov5647.c
> +++ b/drivers/media/i2c/ov5647.c
> @@ -84,18 +84,28 @@ struct regval_list {
>  	u8 data;
>  };
>  
> +struct ov5647_mode {
> +	struct v4l2_mbus_framefmt	format;
> +	struct regval_list		*reg_list;
> +	unsigned int			num_regs;
> +};
> +
> +struct ov5647_format_list {
> +	unsigned int			mbus_code;
> +	struct ov5647_mode		*modes;
> +	unsigned int			num_modes;
> +};
> +
>  struct ov5647 {
>  	struct v4l2_subdev		sd;
>  	struct media_pad		pad;
>  	struct mutex			lock;
> -	struct v4l2_mbus_framefmt	format;
> -	unsigned int			width;
> -	unsigned int			height;
>  	int				power_count;
>  	struct clk			*xclk;
>  	struct gpio_desc		*pwdn;
>  	bool				clock_ncont;
>  	struct v4l2_ctrl_handler	ctrls;
> +	struct ov5647_mode		*mode;
>  };
>  
>  static inline struct ov5647 *to_sensor(struct v4l2_subdev *sd)
> @@ -205,6 +215,33 @@ static struct regval_list ov5647_640x480[] = {
>  	{0x0100, 0x01},
>  };
>  
> +static struct ov5647_mode ov5647_8bit_modes[] = {

const

> +	{
> +		.format	= {
> +			.code		= MEDIA_BUS_FMT_SBGGR8_1X8,
> +			.colorspace	= V4L2_COLORSPACE_SRGB,
> +			.field		= V4L2_FIELD_NONE,
> +			.width		= 640,
> +			.height		= 480
> +		},
> +		.reg_list	= ov5647_640x480,
> +		.num_regs	= ARRAY_SIZE(ov5647_640x480)
> +	},
> +};
> +
> +static const struct ov5647_format_list ov5647_formats[] = {
> +	{
> +		.mbus_code	= MEDIA_BUS_FMT_SBGGR8_1X8,
> +		.modes		= ov5647_8bit_modes,
> +		.num_modes	= ARRAY_SIZE(ov5647_8bit_modes),
> +	},
> +};
> +
> +#define OV5647_NUM_FORMATS	(ARRAY_SIZE(ov5647_formats))

Please use ARRAY_SIZE() directly, you don't need a macro here.

> +
> +#define OV5647_DEFAULT_MODE	(&ov5647_formats[0].modes[0])
> +#define OV5647_DEFAULT_FORMAT	(ov5647_formats[0].modes[0].format)
> +
>  static int ov5647_write(struct v4l2_subdev *sd, u16 reg, u8 val)
>  {
>  	unsigned char data[3] = { reg >> 8, reg & 0xff, val};
> @@ -282,8 +319,7 @@ static int ov5647_set_mode(struct v4l2_subdev *sd)
>  	if (ret < 0)
>  		return ret;
>  
> -	ret = ov5647_write_array(sd, ov5647_640x480,
> -				 ARRAY_SIZE(ov5647_640x480));
> +	ret = ov5647_write_array(sd, sensor->mode->reg_list, sensor->mode->num_regs);

No need for a line over 80.

>  	if (ret < 0) {
>  		dev_err(&client->dev, "write sensor default regs error\n");
>  		return ret;
> @@ -494,10 +530,10 @@ static int ov5647_enum_mbus_code(struct v4l2_subdev *sd,
>  				 struct v4l2_subdev_pad_config *cfg,
>  				 struct v4l2_subdev_mbus_code_enum *code)
>  {
> -	if (code->index > 0)
> +	if (code->index >= OV5647_NUM_FORMATS)
>  		return -EINVAL;
>  
> -	code->code = MEDIA_BUS_FMT_SBGGR8_1X8;
> +	code->code = ov5647_formats[code->index].mbus_code;
>  
>  	return 0;
>  }
> @@ -506,16 +542,24 @@ static int ov5647_enum_frame_size(struct v4l2_subdev *sd,
>  				  struct v4l2_subdev_pad_config *cfg,
>  				  struct v4l2_subdev_frame_size_enum *fse)
>  {
> -	if (fse->index)
> +	const struct v4l2_mbus_framefmt *fmt;
> +	unsigned int i = 0;
> +
> +	for (; i < OV5647_NUM_FORMATS; ++i) {
> +		if (ov5647_formats[i].mbus_code == fse->code)
> +			break;
> +	}
> +	if (i == OV5647_NUM_FORMATS)
>  		return -EINVAL;
>  
> -	if (fse->code != MEDIA_BUS_FMT_SBGGR8_1X8)
> +	if (fse->index >= ov5647_formats[i].num_modes)
>  		return -EINVAL;
>  
> -	fse->min_width = 640;
> -	fse->max_width = 640;
> -	fse->min_height = 480;
> -	fse->max_height = 480;
> +	fmt = &ov5647_formats[i].modes[fse->index].format;
> +	fse->min_width = fmt->width;
> +	fse->max_width = fmt->width;
> +	fse->min_height = fmt->height;
> +	fse->max_height = fmt->height;
>  
>  	return 0;
>  }
> @@ -528,11 +572,7 @@ static int ov5647_set_get_fmt(struct v4l2_subdev *sd,
>  
>  	/* Only one format is supported, so return that. */
>  	memset(fmt, 0, sizeof(*fmt));
> -	fmt->code = MEDIA_BUS_FMT_SBGGR8_1X8;
> -	fmt->colorspace = V4L2_COLORSPACE_SRGB;
> -	fmt->field = V4L2_FIELD_NONE;
> -	fmt->width = 640;
> -	fmt->height = 480;
> +	*fmt = OV5647_DEFAULT_FORMAT;
>  
>  	return 0;
>  }
> @@ -591,11 +631,7 @@ static int ov5647_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
>  	crop->width = OV5647_WINDOW_WIDTH_DEF;
>  	crop->height = OV5647_WINDOW_HEIGHT_DEF;
>  
> -	format->code = MEDIA_BUS_FMT_SBGGR8_1X8;
> -	format->width = 640;
> -	format->height = 480;
> -	format->field = V4L2_FIELD_NONE;
> -	format->colorspace = V4L2_COLORSPACE_SRGB;
> +	*format = OV5647_DEFAULT_FORMAT;
>  
>  	return 0;
>  }
> @@ -813,6 +849,8 @@ static int ov5647_probe(struct i2c_client *client)
>  
>  	mutex_init(&sensor->lock);
>  
> +	sensor->mode = OV5647_DEFAULT_MODE;

You could do this without the macro, too.

> +
>  	ret = ov5647_init_controls(sensor);
>  	if (ret)
>  		goto mutex_destroy;

-- 
Kind regards,

Sakari Ailus

  reply index

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-23 10:07 [PATCH 00/25] media: ov5647: Support RaspberryPi Camera Module v1 Jacopo Mondi
2020-06-23 10:07 ` [PATCH 01/25] dt-bindings: media: ov5647: Document pwdn-gpios Jacopo Mondi
2020-06-23 10:07 ` [PATCH 02/25] dt-bindings: media: ov5647: Document clock-noncontinuous Jacopo Mondi
2020-06-23 10:07 ` [PATCH 03/25] media: ov5647: Add support for PWDN GPIO Jacopo Mondi
2020-07-09 20:04   ` [libcamera-devel] " Dafna Hirschfeld
2020-07-14 12:45     ` Jacopo Mondi
2020-06-23 10:07 ` [PATCH 04/25] media: ov5647: Add support for non-continuous clock mode Jacopo Mondi
2020-06-23 10:07 ` [PATCH 05/25] media: ov5647: Add set_fmt and get_fmt calls Jacopo Mondi
2020-06-23 10:07 ` [PATCH 06/25] media: ov5647: Fix format initialization Jacopo Mondi
2020-06-23 10:07 ` [PATCH 07/25] media: ov5647: Fix style issues Jacopo Mondi
2020-06-23 10:07 ` [PATCH 08/25] media: ov5647: Replace license with SPDX identifier Jacopo Mondi
2020-06-23 10:07 ` [PATCH 09/25] media: ov5647: Fix return value from read/write Jacopo Mondi
2020-06-23 10:08 ` [PATCH 10/25] media: ov5647: Program mode at s_stream(1) time Jacopo Mondi
2020-06-23 16:42 ` [PATCH 11/25] media: ov5647: Implement enum_frame_size() Jacopo Mondi
2020-08-18  7:33   ` Sakari Ailus
2020-08-18  7:38     ` Sakari Ailus
2020-06-23 16:42 ` [PATCH 12/25] media: ov5647: Protect s_stream() with mutex Jacopo Mondi
2020-06-23 16:42 ` [PATCH 13/25] media: ov5647: Support gain, exposure and AWB controls Jacopo Mondi
2020-06-23 16:42 ` [PATCH 14/25] media: ov5647: Rationalize driver structure name Jacopo Mondi
2020-06-23 16:42 ` [PATCH 15/25] media: ov5647: Break out format handling Jacopo Mondi
2020-07-31 11:44   ` Sakari Ailus [this message]
2020-06-23 16:49 ` [PATCH 16/25] media: ov5647: Add support for get_selection() Jacopo Mondi
2020-07-09 19:56   ` [libcamera-devel] " Dafna Hirschfeld
2020-06-23 16:49 ` [PATCH 17/25] media: ov5647: Rename SBGGR8 VGA mode Jacopo Mondi
2020-06-23 16:49 ` [PATCH 18/25] media: ov5647: Add SGGBR10_1X10 modes Jacopo Mondi
2020-06-23 16:49 ` [PATCH 19/25] media: ov5647: Implement set_fmt pad operation Jacopo Mondi
2020-06-29 16:54   ` [libcamera-devel] " Dafna Hirschfeld
2020-06-30 10:13     ` Jacopo Mondi
2020-06-30 11:09       ` Dafna Hirschfeld
2020-06-23 16:55 ` [PATCH 20/25] media: ov5647: Program mode only if it has changed Jacopo Mondi
2020-06-29 17:48   ` Dafna Hirschfeld
2020-06-30  7:43     ` Jacopo Mondi
2020-06-30  9:32       ` Dafna Hirschfeld
2020-06-30 10:06         ` Jacopo Mondi
2020-06-30 10:56           ` Dafna Hirschfeld
2020-06-30 12:05             ` Jacopo Mondi
2020-06-30 13:01               ` Dafna Hirschfeld
2020-06-30 14:53                 ` [libcamera-devel] " Dave Stevenson
2020-06-30 15:11                   ` Dafna Hirschfeld
2020-07-01  7:25                 ` Laurent Pinchart
2020-07-03 12:21                   ` Jacopo Mondi
2020-07-03 16:33                     ` Laurent Pinchart
2020-06-23 16:55 ` [PATCH 21/25] media: ov5647: Set V4L2_SUBDEV_FL_HAS_EVENTS flag Jacopo Mondi
2020-06-23 16:55 ` [PATCH 22/25] media: ov5647: Support V4L2_CID_PIXEL_RATE Jacopo Mondi
2020-06-29 17:01   ` [libcamera-devel] " Dafna Hirschfeld
2020-06-29 21:25     ` Dave Stevenson
2020-06-30 15:13       ` Dave Stevenson
2020-07-01  7:21         ` Laurent Pinchart
2020-06-23 16:55 ` [PATCH 23/25] media: ov5647: Support V4L2_CID_HBLANK control Jacopo Mondi
2020-06-23 16:55 ` [PATCH 24/25] media: ov5647: Support V4L2_CID_VBLANK control Jacopo Mondi
2020-06-23 16:55 ` [PATCH 25/25] media: ov5647: Advertise the correct exposure range Jacopo Mondi
2020-06-29 17:33 ` [PATCH 00/25] media: ov5647: Support RaspberryPi Camera Module v1 Dafna Hirschfeld
2020-06-29 18:08   ` Dafna Hirschfeld
2020-07-10 15:59 ` Dafna Hirschfeld
2020-07-14 12:48   ` Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200731114439.GN13316@paasikivi.fi.intel.com \
    --to=sakari.ailus@linux.intel.com \
    --cc=aford173@gmail.com \
    --cc=andrew_gabbasov@mentor.com \
    --cc=dave.stevenson@raspberrypi.org \
    --cc=erosca@de.adit-jv.com \
    --cc=hugues.fruchet@st.com \
    --cc=hverkuil@xs4all.nl \
    --cc=jacopo@jmondi.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=libcamera-devel@lists.libcamera.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=mrodin@de.adit-jv.com \
    --cc=naush@raspberrypi.com \
    --cc=roman.kovalivskyi@globallogic.com \
    --cc=sudipi@jp.adit-jv.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org
	public-inbox-index linux-media

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git