Re: [PATCH v3 00/24] i.MX Media Driver

[Steve Longerbeam <steve_longerbeam@mentor.com>]

Hi Tim,


On 01/11/2017 03:14 PM, Tim Harvey wrote:
>
> <snip>
>
> Hi Steve,
>
> I took a stab at testing this today on a gw51xx which has an adv7180
> hooked up as follows:
> - i2c3@0x20
> - 8bit data bus from DAT12 to DAT19, HSYNC, VSYNC, PIXCLK on CSI0 pads
> (CSI0_IPU1)
> - PWRDWN# on MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20
> - IRQ# on MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23
> - all three analog inputs available to off-board connector
>
> My patch to the imx6qdl-gw51xx dtsi is:

As long as you used the patch to imx6qdl-sabreauto.dtsti that adds
the adv7180 support as a guide, you should be ok here.

> <snip>
>
>
>
> On an IMX6Q I'm getting the following when the adv7180 module loads:
> [   12.862477] adv7180 2-0020: chip found @ 0x20 (21a8000.i2c)
> [   12.907767] imx-media: Registered subdev adv7180 2-0020
> [   12.907793] imx-media soc:media@0: Entity type for entity adv7180
> 2-0020 was not initialized!
> [   12.907867] imx-media: imx_media_create_link: adv7180 2-0020:0 ->
> ipu1_csi0_mux:1
>
> Is the warning that adv7180 was not initialized expected and or an issue?

Yeah it's still a bug in the adv7180 driver, needs fixing.

>
> Now that your driver is hooking into the current media framework, I'm
> not at all clear on how to link and configure the media entities.

It's all documented at Documentation/media/v4l-drivers/imx.rst.
Follow the SabreAuto pipeline setup example.



> <snip>
>
>
> Additionally I've found that on an IMX6S/IMX6DL we crash while
> registering the media-ic subdev's:
> [    3.975473] imx-media: Registered subdev ipu1_csi1_mux
> [    3.980921] imx-media: Registered subdev ipu1_csi0_mux
> [    4.003205] imx-media: Registered subdev ipu1_ic_prpenc
> [    4.025373] imx-media: Registered subdev ipu1_ic_prpvf
> [    4.037944] ------------[ cut here ]------------
> [    4.042571] Kernel BUG at c06717dc [verbose debug info unavailable]
> [    4.048845] Internal error: Oops - BUG: 0 [#1] SMP ARM
> [    4.053990] Modules linked in:
> [    4.057076] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
> 4.9.0-rc6-00524-g84dad6e-dirty #446
> [    4.065260] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
> ...
> [    4.296250] [<c0671780>] (v4l2_subdev_init) from [<c06fb02c>]
> (imx_ic_probe+0x94/0x1ac)
> [    4.304271] [<c06faf98>] (imx_ic_probe) from [<c05173d8>]
> (platform_drv_probe+0x54/0xb8)
> [    4.312373]  r9:c0d5e858 r8:00000000 r7:fffffdfb r6:c0e5dbf8
> r5:da603810 r4:c16738d8
> [    4.320129] [<c0517384>] (platform_drv_probe) from [<c0515978>]
> (driver_probe_device+0x20c/0x2c0)
> [    4.329010]  r7:c0e5dbf8 r6:00000000 r5:da603810 r4:c16738d8
> [    4.334681] [<c051576c>] (driver_probe_device) from [<c0515af4>]
> (__driver_attach+0xc8/0xcc)
> [    4.343129]  r9:c0d5e858 r8:00000000 r7:00000000 r6:da603844
> r5:c0e5dbf8 r4:da603810
> [    4.350889] [<c0515a2c>] (__driver_attach) from [<c0513adc>]
> (bus_for_each_dev+0x74/0xa8)
> [    4.359078]  r7:00000000 r6:c0515a2c r5:c0e5dbf8 r4:00000000
> [    4.364753] [<c0513a68>] (bus_for_each_dev) from [<c05151d4>]
> (driver_attach+0x20/0x28)
>
> I assume there is an iteration that needs a test on a missing pointer
> only available on chips with both IPU's or PRP

Yep, I only have quad boards here so I haven't gotten around to
testing on S/DL.

But it looks like I forgot to clear out the csi subdev pointer array before
passing it to imx_media_of_parse(). I think that might explain the OOPS
above. Try this patch:

diff --git a/drivers/staging/media/imx/imx-media-dev.c 
b/drivers/staging/media/imx/imx-media-dev.c
index 357654d..0cf2d61 100644
--- a/drivers/staging/media/imx/imx-media-dev.c
+++ b/drivers/staging/media/imx/imx-media-dev.c
@@ -379,7 +379,7 @@ static int imx_media_probe(struct platform_device *pdev)
  {
         struct device *dev = &pdev->dev;
         struct device_node *node = dev->of_node;
-       struct imx_media_subdev *csi[4];
+       struct imx_media_subdev *csi[4] = {0};
         struct imx_media_dev *imxmd;
         int ret;


Steve