Linux-MIPS Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/4] MIPS: Exception vector improvements
@ 2019-04-30 22:53 Paul Burton
  2019-04-30 22:53 ` [PATCH 2/4] MIPS: Always allocate exception vector for MIPSr2+ Paul Burton
                   ` (5 more replies)
  0 siblings, 6 replies; 9+ messages in thread
From: Paul Burton @ 2019-04-30 22:53 UTC (permalink / raw)
  To: linux-mips; +Cc: Serge Semin, Paul Burton

This series improves the way we allocate memory for our exception vector
& configure it in EBase.

Patch 2 in particular is important preparation for changes being made by
Serge Semin in his "mips: Post-bootmem-memblock transition fixes"
series.

Paul Burton (4):
  MIPS: Use mnemblock_phys_alloc() for exception vector
  MIPS: Always allocate exception vector for MIPSr2+
  MIPS: Sync icache for whole exception vector
  MIPS: Remove duplicate EBase configuration

 arch/mips/kernel/traps.c | 63 ++++++++++++++--------------------------
 1 file changed, 22 insertions(+), 41 deletions(-)

-- 
2.21.0


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-30 22:53 [PATCH 0/4] MIPS: Exception vector improvements Paul Burton
2019-04-30 22:53 ` [PATCH 2/4] MIPS: Always allocate exception vector for MIPSr2+ Paul Burton
2019-04-30 22:53 ` [PATCH 1/4] MIPS: Use memblock_phys_alloc() for exception vector Paul Burton
2019-05-01 14:32   ` Philippe Mathieu-Daudé
2019-04-30 22:53 ` [PATCH 4/4] MIPS: Remove duplicate EBase configuration Paul Burton
2019-04-30 22:53 ` [PATCH 3/4] MIPS: Sync icache for whole exception vector Paul Burton
2019-05-01 15:09   ` Philippe Mathieu-Daudé
2019-05-02 13:59 ` [PATCH 0/4] MIPS: Exception vector improvements Serge Semin
2019-05-02 18:35 ` Paul Burton

Linux-MIPS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mips/0 linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ https://lore.kernel.org/linux-mips \
		linux-mips@vger.kernel.org
	public-inbox-index linux-mips

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mips


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git