Linux-MIPS Archive on lore.kernel.org
 help / color / Atom feed
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
To: linux-mips@vger.kernel.org
Cc: chenhc@lemote.com, paul.burton@mips.com, tglx@linutronix.de,
	jason@lakedaemon.net, maz@kernel.org,
	linux-kernel@vger.kernel.org, robh+dt@kernel.org,
	mark.rutland@arm.co, devicetree@vger.kernel.org,
	Jiaxun Yang <jiaxun.yang@flygoat.com>
Subject: [PATCH v2 05/19] irqchip: Add driver for Loongson-3 I/O interrupt controller
Date: Thu,  5 Sep 2019 22:43:02 +0800
Message-ID: <20190905144316.12527-6-jiaxun.yang@flygoat.com> (raw)
In-Reply-To: <20190905144316.12527-1-jiaxun.yang@flygoat.com>

This controller appeared on Loongson-3 family of chips as the primary
package interrupt source.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 drivers/irqchip/Kconfig          |   9 +
 drivers/irqchip/Makefile         |   1 +
 drivers/irqchip/irq-ls3-iointc.c | 275 +++++++++++++++++++++++++++++++
 3 files changed, 285 insertions(+)
 create mode 100644 drivers/irqchip/irq-ls3-iointc.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index ccbb8973a324..4acf38a20a2c 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -483,6 +483,15 @@ config TI_SCI_INTA_IRQCHIP
 	  If you wish to use interrupt aggregator irq resources managed by the
 	  TI System Controller, say Y here. Otherwise, say N.
 
+config LS3_IOINTC
+	bool "Loongson3 I/O Interrupt Controller"
+	depends on MACH_LOONGSON64
+	default y
+	select IRQ_DOMAIN
+	select GENERIC_IRQ_CHIP
+	help
+	  Support for the Loongson-3 I/O Interrupt Controller.
+
 endmenu
 
 config SIFIVE_PLIC
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index cc7c43932f16..18ba8f203afd 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -103,3 +103,4 @@ obj-$(CONFIG_MADERA_IRQ)		+= irq-madera.o
 obj-$(CONFIG_LS1X_IRQ)			+= irq-ls1x.o
 obj-$(CONFIG_TI_SCI_INTR_IRQCHIP)	+= irq-ti-sci-intr.o
 obj-$(CONFIG_TI_SCI_INTA_IRQCHIP)	+= irq-ti-sci-inta.o
+obj-$(CONFIG_LS3_IOINTC)			+= irq-ls3-iointc.o
diff --git a/drivers/irqchip/irq-ls3-iointc.c b/drivers/irqchip/irq-ls3-iointc.c
new file mode 100644
index 000000000000..0fbff7afa43c
--- /dev/null
+++ b/drivers/irqchip/irq-ls3-iointc.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2019, Jiaxun Yang <jiaxun.yang@flygoat.com>
+ *  Loongson-3 IOINTC IRQ support
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <linux/irqchip/chained_irq.h>
+
+
+#define LS3_CHIP_IRQ	32
+
+#define LS3_REG_INTx_MAP(x)	(x * 0x1)
+#define LS3_INTC_CHIP_START	0x20
+
+#define LS3_REG_INTC_STATUS	(LS3_INTC_CHIP_START + 0x00)
+#define LS3_REG_INTC_EN_STATUS	(LS3_INTC_CHIP_START + 0x04)
+#define LS3_REG_INTC_ENABLE	(LS3_INTC_CHIP_START + 0x08)
+#define LS3_REG_INTC_DISABLE	(LS3_INTC_CHIP_START + 0x0c)
+#define LS3_REG_INTC_POL	(LS3_INTC_CHIP_START + 0x10)
+#define LS3_REG_INTC_EDGE	(LS3_INTC_CHIP_START + 0x18)
+
+#define LS3_MAP_CORE_INT(x, y)	(u8)(BIT(x) | (BIT(y) << 4))
+
+struct ls3_iointc_priv {
+	u8 map_cache[LS3_CHIP_IRQ];
+};
+
+
+static void ls3_io_chained_handle_irq(struct irq_desc *desc)
+{
+	struct irq_chip_generic *gc = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	u32 pending;
+
+	chained_irq_enter(chip, desc);
+
+	/* Check with mask_cache to prevent HW fake interrupt */
+	pending = ~gc->mask_cache &
+				readl(gc->reg_base + LS3_REG_INTC_STATUS);
+
+	if (!pending)
+		spurious_interrupt();
+
+	while (pending) {
+		int bit = __ffs(pending);
+
+		generic_handle_irq(irq_find_mapping(gc->domain, bit));
+		pending &= ~BIT(bit);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static void ls_intc_set_bit(struct irq_chip_generic *gc,
+							unsigned int offset,
+							u32 mask, bool set)
+{
+	if (set)
+		writel(readl(gc->reg_base + offset) | mask,
+				gc->reg_base + offset);
+	else
+		writel(readl(gc->reg_base + offset) & ~mask,
+				gc->reg_base + offset);
+}
+
+static int ls_intc_set_type(struct irq_data *data, unsigned int type)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	u32 mask = data->mask;
+	unsigned long flags;
+
+	irq_gc_lock_irqsave(gc, flags);
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		ls_intc_set_bit(gc, LS3_REG_INTC_EDGE, mask, false);
+		ls_intc_set_bit(gc, LS3_REG_INTC_POL, mask, true);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		ls_intc_set_bit(gc, LS3_REG_INTC_EDGE, mask, false);
+		ls_intc_set_bit(gc, LS3_REG_INTC_POL, mask, false);
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		ls_intc_set_bit(gc, LS3_REG_INTC_EDGE, mask, true);
+		ls_intc_set_bit(gc, LS3_REG_INTC_POL, mask, true);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		ls_intc_set_bit(gc, LS3_REG_INTC_EDGE, mask, true);
+		ls_intc_set_bit(gc, LS3_REG_INTC_POL, mask, false);
+		break;
+	default:
+		return -EINVAL;
+	}
+	irq_gc_unlock_irqrestore(gc, flags);
+
+	irqd_set_trigger_type(data, type);
+	return 0;
+}
+
+static int ls_intc_set_affinity(struct irq_data *idata,
+					 const cpumask_t *cpu_mask, bool force)
+{
+	return -ENAVAIL;
+}
+
+static int ls3_iointc_irq_domain_xlate(struct irq_domain *d,
+				struct device_node *ctrlr,
+				const u32 *intspec, unsigned int intsize,
+				unsigned long *out_hwirq,
+				unsigned int *out_type)
+{
+	struct ls3_iointc_priv *priv = d->host_data;
+	struct irq_chip_generic *gc;
+	int err;
+	unsigned long flags;
+
+	/* Call the generic xlate to process first two cells  */
+	err = irq_domain_xlate_onetwocell(d, ctrlr, intspec,
+									intsize, out_hwirq, out_type);
+	if (err)
+		return err;
+	/* If we only have two cells, don't process map information */
+	if (intsize <= 2)
+		return 0;
+	else if (intsize != 4)
+		return -EINVAL; /* Only 4 cells is acceptable */
+
+	/* Third cell is the parent interrupt line, fourth is the Core */
+	if (intspec[3] > 5 || intspec[4] > 3)
+		return -EINVAL; /* Check IP & Core  */
+
+	gc = irq_get_domain_generic_chip(d, *out_hwirq);
+	priv->map_cache[*out_hwirq] = LS3_MAP_CORE_INT(intspec[4], intspec[3]);
+
+	irq_gc_lock_irqsave(gc, flags);
+	writeb(priv->map_cache[*out_hwirq],
+			gc->reg_base + LS3_REG_INTx_MAP(*out_hwirq));
+	irq_gc_unlock_irqrestore(gc, flags);
+
+	return 0;
+}
+
+static const struct irq_domain_ops ls3_iointc_irq_domain_ops = {
+	.map	= irq_map_generic_chip,
+	.unmap  = irq_unmap_generic_chip,
+	.xlate	= ls3_iointc_irq_domain_xlate,
+};
+
+static void ls3_iointc_resume(struct irq_chip_generic *gc)
+{
+	struct ls3_iointc_priv *priv = gc->private;
+	unsigned long flags;
+	int i;
+
+	irq_gc_lock_irqsave(gc, flags);
+	/* Revert map cache */
+	for (i = 0; i < LS3_CHIP_IRQ; i++)
+		writeb(priv->map_cache[i],
+				gc->reg_base + LS3_REG_INTx_MAP(i));
+
+	/* Revert mask cache */
+	writel(gc->mask_cache, gc->reg_base + LS3_REG_INTC_DISABLE);
+	writel(~gc->mask_cache, gc->reg_base + LS3_REG_INTC_ENABLE);
+	irq_gc_unlock_irqrestore(gc, flags);
+}
+
+int __init ls3_iointc_of_init(struct device_node *node,
+					   struct device_node *parent)
+{
+	struct irq_chip_generic *gc;
+	struct irq_domain *domain;
+	struct irq_chip_type *ct;
+	struct ls3_iointc_priv *priv;
+	void __iomem *intc_base;
+	int parent_irq, err = 0;
+	int core = cpu_logical_map(smp_processor_id());
+	int i;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	intc_base = of_iomap(node, 0);
+	if (!intc_base) {
+		err = -ENODEV;
+		goto out_free_priv;
+	}
+
+	parent_irq = irq_of_parse_and_map(node, 0);
+	if (!parent_irq) {
+		pr_err("ls3-iointc: unable to get parent irq\n");
+		err =  -ENODEV;
+		goto out_iounmap;
+	}
+	/* Setup IRQ domain */
+	domain = irq_domain_add_linear(node, 32,
+										&ls3_iointc_irq_domain_ops,
+										priv);
+	if (!domain) {
+		pr_err("ls3-iointc: cannot add IRQ domain\n");
+		err = -ENOMEM;
+		goto out_iounmap;
+	}
+
+	err = irq_alloc_domain_generic_chips(domain, 32, 1,
+										node->full_name,
+										handle_level_irq,
+										IRQ_NOPROBE, 0, 0);
+	if (err) {
+		pr_err("ls3-iointc: unable to register IRQ domain\n");
+		err = -ENOMEM;
+		goto out_free_domain;
+	}
+
+	/*
+	 * Initialize the map_cache by routing all the interrupts
+	 * to interrupt line 0 of the bootcore
+	 */
+	pr_info("ls3-iointc: Mapping All ls3-iointc IRQ to core %d, IP 0\n",
+			core);
+	for (i = 0; i < LS3_CHIP_IRQ; i++) {
+		priv->map_cache[i] = LS3_MAP_CORE_INT(core, 0);
+		writeb(priv->map_cache[i],
+				intc_base + LS3_REG_INTx_MAP(i));
+	}
+
+	/* Disable all IRQs */
+	writel(0xffffffff, intc_base + LS3_REG_INTC_DISABLE);
+	/* Set to level triggered */
+	writel(0x0, intc_base + LS3_REG_INTC_EDGE);
+
+	gc = irq_get_domain_generic_chip(domain, 0);
+	gc->private = priv;
+	gc->reg_base = intc_base;
+	gc->domain = domain;
+	gc->resume = ls3_iointc_resume;
+
+	ct = gc->chip_types;
+	ct->regs.enable = LS3_REG_INTC_ENABLE;
+	ct->regs.disable = LS3_REG_INTC_DISABLE;
+	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+	ct->chip.irq_mask = irq_gc_mask_disable_reg;
+	ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
+	ct->chip.irq_set_type = ls_intc_set_type;
+	ct->chip.irq_set_affinity = ls_intc_set_affinity;
+
+	/* Initialize mask_cache by read EN_STATUS register */
+	gc->mask_cache = ~readl(intc_base + LS3_REG_INTC_EN_STATUS);
+
+	irq_set_chained_handler_and_data(parent_irq,
+									ls3_io_chained_handle_irq,
+									gc);
+
+	return 0;
+
+out_free_domain:
+	irq_domain_remove(domain);
+out_iounmap:
+	iounmap(intc_base);
+out_free_priv:
+	kfree(priv);
+
+	return err;
+}
+
+IRQCHIP_DECLARE(ls3_iointc, "loongson,ls3-iointc", ls3_iointc_of_init);
-- 
2.22.0


  parent reply index

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-27  8:52 [PATCH 00/13] Modernize Loongson64 Machine Jiaxun Yang
2019-08-27  8:52 ` [PATCH 01/13] MIPS: Loongson64: Rename CPU TYPES Jiaxun Yang
2019-08-27  8:52 ` [PATCH 02/13] MIPS: Loongson64: Sepreate loongson2ef/loongson64 code Jiaxun Yang
2019-08-27 22:05   ` Aaro Koskinen
2019-08-28  0:37     ` Jiaxun Yang
2019-09-02 17:51       ` Aaro Koskinen
2019-08-27  8:52 ` [PATCH 03/13] MAINTAINERS: Fix entries for new loongson64 path Jiaxun Yang
2019-08-27  8:52 ` [PATCH 04/13] irqchip: Add driver for Loongson-3 I/O interrupt controller Jiaxun Yang
2019-08-27 16:45   ` Marc Zyngier
2019-08-28  0:27     ` Jiaxun Yang
2019-08-28  6:59       ` Marc Zyngier
2019-08-28 15:31         ` Jiaxun Yang
2019-08-28 16:02           ` Marc Zyngier
2019-08-27  8:52 ` [PATCH 05/13] dt-bindings: interrupt-controller: Add Loongson-3 IOINTC Jiaxun Yang
2019-08-27 13:08   ` Rob Herring
2019-08-27  8:52 ` [PATCH 06/13] irqchip: Add driver for Loongson-3 HyperTransport interrupt controller Jiaxun Yang
2019-08-27 12:53   ` Marc Zyngier
2019-08-27  8:52 ` [PATCH 07/13] dt-bindings: interrupt-controller: Add Loongson-3 HTINTC Jiaxun Yang
2019-08-27 12:49   ` Rob Herring
2019-08-27 14:08     ` Jiaxun Yang
2019-08-27  8:52 ` [PATCH 08/13] irqchip: i8259: Add plat-poll support Jiaxun Yang
2019-08-27  8:52 ` [PATCH 09/13] irqchip: mips-cpu: Convert to simple domain Jiaxun Yang
2019-08-27  8:52 ` [PATCH 10/13] MIPS: Loongson64: Drop legacy IRQ code Jiaxun Yang
2019-08-27  8:53 ` [PATCH 11/13] dt-bindings: mips: Add loongson cpus & boards Jiaxun Yang
2019-08-27 12:45   ` Rob Herring
2019-08-27 14:18     ` Jiaxun Yang
2019-08-27 20:41       ` Paul Burton
2019-08-28  0:15         ` Jiaxun Yang
2019-09-02 14:50         ` Rob Herring
2019-09-03  9:07           ` Paul Burton
2019-09-04  3:33             ` Huacai Chen
2019-08-27  8:53 ` [PATCH 12/13] MIPS: Loongson64: Add generic dts Jiaxun Yang
2019-08-27  8:53 ` [PATCH 13/13] MIPS: Loongson64: Load built-in dtbs Jiaxun Yang
2019-08-27 13:25 ` Re:[PATCH 00/13] Modernize Loongson64 Machine 陈华才
2019-08-27 14:39   ` [PATCH " Jiaxun Yang
2019-08-30  4:25 ` [PATCH v1 00/18] " Jiaxun Yang
2019-08-30  4:25   ` [PATCH v1 01/18] MIPS: Loongson64: Rename CPU TYPES Jiaxun Yang
2019-08-30  4:25   ` [PATCH v1 02/18] MIPS: Loongson64: separate loongson2ef/loongson64 code Jiaxun Yang
2019-08-30  4:25   ` [PATCH v1 03/18] MAINTAINERS: Fix entries for new loongson64 path Jiaxun Yang
2019-08-30  4:25   ` [PATCH v1 04/18] irqchip: Export generic chip domain map/unmap functions Jiaxun Yang
2019-08-30  4:25   ` [PATCH v1 05/18] irqchip: Add driver for Loongson-3 I/O interrupt controller Jiaxun Yang
2019-08-30  4:25   ` [PATCH v1 06/18] dt-bindings: interrupt-controller: Add Loongson-3 IOINTC Jiaxun Yang
2019-09-05 14:42 ` [PATCH v2 00/19] Modernize Loongson64 Machine Jiaxun Yang
2019-09-05 14:42   ` [PATCH v2 01/19] MIPS: Loongson64: Rename CPU TYPES Jiaxun Yang
2019-09-05 14:42   ` [PATCH v2 02/19] MIPS: Loongson64: separate loongson2ef/loongson64 code Jiaxun Yang
2019-09-10  0:12     ` Paul Burton
2019-09-16  2:23       ` Huacai Chen
2019-09-18  0:38       ` Jiaxun Yang
2019-09-05 14:43   ` [PATCH v2 03/19] MAINTAINERS: Fix entries for new loongson64 path Jiaxun Yang
2019-09-05 14:43   ` [PATCH v2 04/19] irqchip: Export generic chip domain map/unmap functions Jiaxun Yang
2019-09-05 14:43   ` Jiaxun Yang [this message]
2019-09-05 14:43   ` [PATCH v2 06/19] dt-bindings: interrupt-controller: Add Loongson-3 IOINTC Jiaxun Yang
2019-09-17 21:26     ` Rob Herring
2019-09-05 14:43   ` [PATCH v2 07/19] irqchip: Add driver for Loongson-3 HyperTransport interrupt controller Jiaxun Yang
2019-09-05 14:43   ` [PATCH v2 08/19] dt-bindings: interrupt-controller: Add Loongson-3 HTINTC Jiaxun Yang
2019-09-05 14:43   ` [PATCH v2 09/19] irqchip: i8259: Add plat-poll support Jiaxun Yang
2019-09-05 14:43   ` [PATCH v2 10/19] irqchip: mips-cpu: Convert to simple domain Jiaxun Yang
2019-09-05 14:43   ` [PATCH v2 11/19] MIPS: Loongson64: Drop legacy IRQ code Jiaxun Yang
2019-09-05 14:43   ` [PATCH v2 12/19] dt-bindings: mips: Add loongson boards Jiaxun Yang
2019-09-30 13:23     ` Rob Herring
2019-09-05 14:43   ` [PATCH v2 13/19] dt-bindings: Document loongson vendor-prefix Jiaxun Yang
2019-09-05 14:43   ` [PATCH v2 14/19] MIPS: Loongson64: Add generic dts Jiaxun Yang
2019-09-07  2:53     ` Huacai Chen
2019-09-07  3:14       ` Jiaxun Yang
2019-09-30 13:20     ` Rob Herring
2019-09-05 14:43   ` [PATCH v2 15/19] MIPS: Loongson64: Load built-in dtbs Jiaxun Yang
2019-09-05 14:43   ` [PATCH v2 16/19] GPIO: loongson: Drop Loongson-3A/3B support Jiaxun Yang
2019-09-05 14:43   ` [PATCH v2 17/19] MIPS: Loongson: Regenerate defconfigs Jiaxun Yang
2019-09-05 14:43   ` [PATCH v2 18/19] MAINTAINERS: Add new pathes to LOONGSON64 ARCHITECTURE Jiaxun Yang
2019-09-05 14:43   ` [PATCH v2 19/19] MAINTAINERS: Add myself as maintainer of LOONGSON64 Jiaxun Yang
2019-09-07  3:13   ` [PATCH v2 00/19] Modernize Loongson64 Machine Huacai Chen
2019-09-12  6:30 ` [PATCH 00/13] " Matt Turner
2019-09-18  0:33   ` Jiaxun Yang

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190905144316.12527-6-jiaxun.yang@flygoat.com \
    --to=jiaxun.yang@flygoat.com \
    --cc=chenhc@lemote.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.co \
    --cc=maz@kernel.org \
    --cc=paul.burton@mips.com \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-MIPS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mips/0 linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ https://lore.kernel.org/linux-mips \
		linux-mips@vger.kernel.org linux-mips@archiver.kernel.org
	public-inbox-index linux-mips

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mips


AGPL code for this site: git clone https://public-inbox.org/ public-inbox