Re: [PATCH v3 03/10] dt-bindings: interrupt-controller: Add Loongson IOINTC

[Huacai Chen <chenhc@lemote.com>]

Hi, Jiaxun,

On Sun, Jan 12, 2020 at 4:21 PM Jiaxun Yang <jiaxun.yang@flygoat.com> wrote:
>
> Document Loongson I/O Interrupt controller.
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>  .../interrupt-controller/loongson,iointc.yaml | 92 +++++++++++++++++++
>  1 file changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,iointc.yaml
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,iointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,iointc.yaml
> new file mode 100644
> index 000000000000..b0fe6c551362
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,iointc.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/interrupt-controller/loongson,iointc.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Loongson I/O Interrupt Controller
> +
> +maintainers:
> +  - Jiaxun Yang <jiaxun.yang@flygoat.com>
> +
> +description: |
> +  This interrupt controller is found in the Loongson-3 family of chips as the primary
> +  package interrupt source which can route interrupt to interrupt line of cores.
> +
> +allOf:
> +  - $ref: /schemas/interrupt-controller.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: loongson,iointc-1.0
> +      - const: loongson,iointc-1.0a
As our early discussion, we should use liointc for the legacy Loongson
irq-controller ans use eiointc for the new irq-controller in
Loongson-3A4000. Moreover, could you please describe the difference
between 1.0 and 1.0a?

Huacai
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  interrupts:
> +    description:
> +      Interrupt source of the CPU interrupts.
> +    minItems: 1
> +    maxItems: 4
> +
> +  interrupt-names:
> +    description: List of names for the parent interrupts.
> +    oneOf:
> +      - items:
> +          - const: int0
> +          - const: int1
> +          - const: int2
> +          - const: int3
> +    minItems: 1
> +    maxItems: 4
> +
> +  '#interrupt-cells':
> +    const: 2
> +
> +  'loongson,parent_int_map':
> +    description: |
> +      This property points the accept range of children interrupts
> +      that parents will recieve. Each cell refers to a parent interrupt line
> +      and each bit in the cell refers to a children interrupt. If a parent
> +      did not connected, than keep it's cell with zero.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> +      - items:
> +          minItems: 4
> +          maxItems: 4
> +
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - 'loongson,parent_int_map'
> +
> +
> +examples:
> +  - |
> +    iointc: interrupt-controller@3ff01400 {
> +      compatible = "loongson,iointc-1.0";
> +      reg = <0 0x3ff01400 0x64>;
> +
> +      interrupt-controller;
> +      #interrupt-cells = <2>;
> +
> +      interrupt-parent = <&cpuintc>;
> +      interrupts = <2>, <3>;
> +      interrupt-names = "int0", "int1";
> +
> +      loongson,parent_int_map = <0xf0ffffff>, /* int0 */
> +                                <0x0f000000>, /* int1 */
> +                                <0x00000000>, /* int2 */
> +                                <0x00000000>; /* int3 */
> +
> +    };
> +
> +...
> --
> 2.24.1
>