* [PATCH] mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt @ 2022-09-13 8:40 yaliang.wang [not found] ` <MN2PR17MB3375BC0E5878B19651475413B8479@MN2PR17MB3375.namprd17.prod.outlook.com> 2022-10-03 5:35 ` Tudor.Ambarus 0 siblings, 2 replies; 8+ messages in thread From: yaliang.wang @ 2022-09-13 8:40 UTC (permalink / raw) To: tudor.ambarus, pratyush, michael, miquel.raynal, richard, vigneshr Cc: linux-mtd, linux-kernel From: Yaliang Wang <Yaliang.Wang@windriver.com> When utilizing PARSE_SFDP to initialize the flash parameter, the deprecated initializing method spi_nor_init_params_deprecated() and the function spi_nor_manufacturer_init_params() within it will never be executed, which results in the default_init hook function will also never be executed. As we do have quad enable function defined in BFPT, the post_bfpt hook will be the right place to tweak the function. Cc: stable@vger.kernel.org Fixes: 047275f7de18 ("mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com> --- drivers/mtd/spi-nor/gigadevice.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c index 119b38e6fc2a..bdc4d73424af 100644 --- a/drivers/mtd/spi-nor/gigadevice.c +++ b/drivers/mtd/spi-nor/gigadevice.c @@ -8,19 +8,24 @@ #include "core.h" -static void gd25q256_default_init(struct spi_nor *nor) +static int +gd25q256_post_bfpt(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt) { /* * Some manufacturer like GigaDevice may use different * bit to set QE on different memories, so the MFR can't * indicate the quad_enable method for this case, we need - * to set it in the default_init fixup hook. + * to set it in the post_bfpt fixup hook. */ nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable; + + return 0; } static const struct spi_nor_fixups gd25q256_fixups = { - .default_init = gd25q256_default_init, + .post_bfpt = gd25q256_post_bfpt, }; static const struct flash_info gigadevice_nor_parts[] = { -- 2.34.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/ ^ permalink raw reply related [flat|nested] 8+ messages in thread
[parent not found: <MN2PR17MB3375BC0E5878B19651475413B8479@MN2PR17MB3375.namprd17.prod.outlook.com>]
* Re: [PATCH] mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt [not found] ` <MN2PR17MB3375BC0E5878B19651475413B8479@MN2PR17MB3375.namprd17.prod.outlook.com> @ 2022-09-14 3:05 ` Yaliang Wang 2022-09-14 7:27 ` Michael Walle 0 siblings, 1 reply; 8+ messages in thread From: Yaliang Wang @ 2022-09-14 3:05 UTC (permalink / raw) To: Vanessa Page, tudor.ambarus, pratyush, michael, miquel.raynal, richard, vigneshr Cc: linux-mtd, linux-kernel In case the mail list can't receive the email, I'd like to send the email again. Sorry, I didn't make it clear. I'm doing this because the flash info member parse_sfdp is initialized to "true" by PARSE_SFDP macro, as you can see below { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512) PARSE_SFDP FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6) FIXUP_FLAGS(SPI_NOR_4B_OPCODES) .fixups = &gd25q256_fixups }, And when parse_sfdp is true, the function spi_nor_init_params() will call spi_nor_parse_sfdp() to initialize the parameters, and I can't see any other place to call the original default_init() hook in the fixups other than in spi_nor_init_params_deprecated() -> spi_nor_manufacturer_init_params(). After checking the history of why we are adding this, that is to say the commit 48e4d973aefe ("mtd: spi-nor: Add a default_init() fixup hook for gd25q256") and the corresponding disscusions, I believe it was added for some reason, and we need to add back this function. On 9/13/22 18:46, Vanessa Page wrote: > **[Please note: This e-mail is from an EXTERNAL e-mail address] > > Why are you doing this? > ------------------------------------------------------------------------ > *From:* linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of > yaliang.wang@windriver.com <yaliang.wang@windriver.com> > *Sent:* Tuesday, September 13, 2022 4:40 AM > *To:* tudor.ambarus@microchip.com <tudor.ambarus@microchip.com>; > pratyush@kernel.org <pratyush@kernel.org>; michael@walle.cc > <michael@walle.cc>; miquel.raynal@bootlin.com > <miquel.raynal@bootlin.com>; richard@nod.at <richard@nod.at>; > vigneshr@ti.com <vigneshr@ti.com> > *Cc:* linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; > linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> > *Subject:* [PATCH] mtd: spi-nor: gigadevice: gd25q256: replace > gd25q256_default_init with gd25q256_post_bfpt > From: Yaliang Wang <Yaliang.Wang@windriver.com> > > When utilizing PARSE_SFDP to initialize the flash parameter, the > deprecated initializing method spi_nor_init_params_deprecated() and the > function spi_nor_manufacturer_init_params() within it will never be > executed, which results in the default_init hook function will also never > be executed. As we do have quad enable function defined in BFPT, the > post_bfpt hook will be the right place to tweak the function. > > Cc: stable@vger.kernel.org > Fixes: 047275f7de18 ("mtd: spi-nor: gigadevice: gd25q256: Init flash > based on SFDP") > Reported-by: kernel test robot <lkp@intel.com> > Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com> > --- > drivers/mtd/spi-nor/gigadevice.c | 11 ++++++++--- > 1 file changed, 8 insertions(+), 3 deletions(-) > > diff --git a/drivers/mtd/spi-nor/gigadevice.c > b/drivers/mtd/spi-nor/gigadevice.c > index 119b38e6fc2a..bdc4d73424af 100644 > --- a/drivers/mtd/spi-nor/gigadevice.c > +++ b/drivers/mtd/spi-nor/gigadevice.c > @@ -8,19 +8,24 @@ > > #include "core.h" > > -static void gd25q256_default_init(struct spi_nor *nor) > +static int > +gd25q256_post_bfpt(struct spi_nor *nor, > + const struct sfdp_parameter_header *bfpt_header, > + const struct sfdp_bfpt *bfpt) > { > /* > * Some manufacturer like GigaDevice may use different > * bit to set QE on different memories, so the MFR can't > * indicate the quad_enable method for this case, we need > - * to set it in the default_init fixup hook. > + * to set it in the post_bfpt fixup hook. > */ > nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable; > + > + return 0; > } > > static const struct spi_nor_fixups gd25q256_fixups = { > - .default_init = gd25q256_default_init, > + .post_bfpt = gd25q256_post_bfpt, > }; > > static const struct flash_info gigadevice_nor_parts[] = { > -- > 2.34.1 > > > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/ > <https://urldefense.com/v3/__http://lists.infradead.org/mailman/listinfo/linux-mtd/__;!!AjveYdw8EvQ!cFcIju_6rdasA67JAVB5Ww727YTj7uzWhJ8HjkRjEJmn-BFGWsga9mPTqCo_m8WFT4Jcu8Uj0iME34B3OOc$> ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt 2022-09-14 3:05 ` Yaliang Wang @ 2022-09-14 7:27 ` Michael Walle 0 siblings, 0 replies; 8+ messages in thread From: Michael Walle @ 2022-09-14 7:27 UTC (permalink / raw) To: Yaliang Wang Cc: tudor.ambarus, pratyush, miquel.raynal, richard, vigneshr, linux-mtd, linux-kernel Am 2022-09-14 05:05, schrieb Yaliang Wang: > In case the mail list can't receive the email, I'd like to send the > email again. > > Sorry, I didn't make it clear. > I'm doing this because the flash info member parse_sfdp is initialized > to "true" by PARSE_SFDP macro, as you can see below > { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512) > PARSE_SFDP > FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | > SPI_NOR_TB_SR_BIT6) > FIXUP_FLAGS(SPI_NOR_4B_OPCODES) > .fixups = &gd25q256_fixups }, > > And when parse_sfdp is true, the function spi_nor_init_params() will > call spi_nor_parse_sfdp() to initialize the parameters, and I can't > see any other place to call the original default_init() hook in the > fixups other than in spi_nor_init_params_deprecated() -> > spi_nor_manufacturer_init_params(). > > After checking the history of why we are adding this, that is to say > the commit 48e4d973aefe ("mtd: spi-nor: Add a default_init() fixup > hook for gd25q256") and the corresponding disscusions, I believe it > was added for some reason, and we need to add back this function. > > On 9/13/22 18:46, Vanessa Page wrote: >> **[Please note: This e-mail is from an EXTERNAL e-mail address] >> >> Why are you doing this? Vanessa Page is a bot/troll. -michael ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt 2022-09-13 8:40 [PATCH] mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt yaliang.wang [not found] ` <MN2PR17MB3375BC0E5878B19651475413B8479@MN2PR17MB3375.namprd17.prod.outlook.com> @ 2022-10-03 5:35 ` Tudor.Ambarus 2022-10-16 8:37 ` Yaliang Wang 2022-10-16 17:19 ` [PATCH v2 0/1] " yaliang.wang 1 sibling, 2 replies; 8+ messages in thread From: Tudor.Ambarus @ 2022-10-03 5:35 UTC (permalink / raw) To: yaliang.wang, pratyush, michael, miquel.raynal, richard, vigneshr Cc: linux-mtd, linux-kernel On 9/13/22 11:40, yaliang.wang@windriver.com wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > From: Yaliang Wang <Yaliang.Wang@windriver.com> > > When utilizing PARSE_SFDP to initialize the flash parameter, the > deprecated initializing method spi_nor_init_params_deprecated() and the > function spi_nor_manufacturer_init_params() within it will never be > executed, which results in the default_init hook function will also never > be executed. As we do have quad enable function defined in BFPT, the > post_bfpt hook will be the right place to tweak the function. > > Cc: stable@vger.kernel.org > Fixes: 047275f7de18 ("mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP") > Reported-by: kernel test robot <lkp@intel.com> > Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com> > --- > drivers/mtd/spi-nor/gigadevice.c | 11 ++++++++--- > 1 file changed, 8 insertions(+), 3 deletions(-) > > diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c > index 119b38e6fc2a..bdc4d73424af 100644 > --- a/drivers/mtd/spi-nor/gigadevice.c > +++ b/drivers/mtd/spi-nor/gigadevice.c > @@ -8,19 +8,24 @@ > > #include "core.h" > > -static void gd25q256_default_init(struct spi_nor *nor) > +static int > +gd25q256_post_bfpt(struct spi_nor *nor, > + const struct sfdp_parameter_header *bfpt_header, > + const struct sfdp_bfpt *bfpt) > { > /* > * Some manufacturer like GigaDevice may use different > * bit to set QE on different memories, so the MFR can't > * indicate the quad_enable method for this case, we need > - * to set it in the default_init fixup hook. > + * to set it in the post_bfpt fixup hook. > */ > nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable; > + > + return 0; > } Maybe we can get rid of this fixup hook entirely. If it was a default_init(), then it was set before the SFDP was parsed, so the quad_enable method was overwritten anyway. Would you please check why this method was introduced? What Quad Enable method do you get from SFDP? I expect that spi_nor_sr1_bit6_quad_enable, and the fixup hook to be in vain. > > static const struct spi_nor_fixups gd25q256_fixups = { > - .default_init = gd25q256_default_init, > + .post_bfpt = gd25q256_post_bfpt, > }; > > static const struct flash_info gigadevice_nor_parts[] = { > -- > 2.34.1 > -- Cheers, ta ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt 2022-10-03 5:35 ` Tudor.Ambarus @ 2022-10-16 8:37 ` Yaliang Wang 2022-10-16 17:19 ` [PATCH v2 0/1] " yaliang.wang 1 sibling, 0 replies; 8+ messages in thread From: Yaliang Wang @ 2022-10-16 8:37 UTC (permalink / raw) To: Tudor.Ambarus, pratyush, michael, miquel.raynal, richard, vigneshr Cc: linux-mtd, linux-kernel On 10/3/22 13:35, Tudor.Ambarus@microchip.com wrote: > [Please note: This e-mail is from an EXTERNAL e-mail address] > > On 9/13/22 11:40, yaliang.wang@windriver.com wrote: >> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe >> >> From: Yaliang Wang <Yaliang.Wang@windriver.com> >> >> When utilizing PARSE_SFDP to initialize the flash parameter, the >> deprecated initializing method spi_nor_init_params_deprecated() and the >> function spi_nor_manufacturer_init_params() within it will never be >> executed, which results in the default_init hook function will also never >> be executed. As we do have quad enable function defined in BFPT, the >> post_bfpt hook will be the right place to tweak the function. >> >> Cc: stable@vger.kernel.org >> Fixes: 047275f7de18 ("mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP") >> Reported-by: kernel test robot <lkp@intel.com> >> Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com> >> --- >> drivers/mtd/spi-nor/gigadevice.c | 11 ++++++++--- >> 1 file changed, 8 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c >> index 119b38e6fc2a..bdc4d73424af 100644 >> --- a/drivers/mtd/spi-nor/gigadevice.c >> +++ b/drivers/mtd/spi-nor/gigadevice.c >> @@ -8,19 +8,24 @@ >> >> #include "core.h" >> >> -static void gd25q256_default_init(struct spi_nor *nor) >> +static int >> +gd25q256_post_bfpt(struct spi_nor *nor, >> + const struct sfdp_parameter_header *bfpt_header, >> + const struct sfdp_bfpt *bfpt) >> { >> /* >> * Some manufacturer like GigaDevice may use different >> * bit to set QE on different memories, so the MFR can't >> * indicate the quad_enable method for this case, we need >> - * to set it in the default_init fixup hook. >> + * to set it in the post_bfpt fixup hook. >> */ >> nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable; >> + >> + return 0; >> } > > Maybe we can get rid of this fixup hook entirely. If it was a default_init(), then it > was set before the SFDP was parsed, so the quad_enable method was overwritten anyway. > Would you please check why this method was introduced? I googled the gd25q256 datasheet, and found 'C' generation datasheet(GD25Q256C[1]) implements the JESD216 standards, it doesn't have the QER(Quad Enable Requirements) field in BFPT, but it does have the QE bit in SR1 bit6, this may be the reason why the method was introduced. [1]https://datasheetspdf.com/pdf-file/1295936/GigaDevice/GD25Q256C/1 > > What Quad Enable method do you get from SFDP? I expect that spi_nor_sr1_bit6_quad_enable, > and the fixup hook to be in vain. As above mentioned, 'C' generation doesn't have the QER field in BFPT, so no corresponding quad_enable method can be found in SFDP. Regrading to 'D' generation [2], it implements the JESD216B standards, the corresponding quad_enable method is spi_nor_sr2_bit1_quad_enable, parsing the BFPT can get the right method. As for 'E' generation[3], it also implements the JESD216B standards and has the same status registers as defined in 'D' generation, but its datasheet doesn't contain SFDP and BFPT definations, so there may be some uncertain. So, in summary, I think 'C' generation devices still need the post_bfpt to add the correct quad_enable method, this can do some benefits to the outdated devices. For sure, the post_bfpt method should distinguish the JESD216 standards the first and then apply the correct quad_enable method, I can cook another patch to do this. [2]https://www.gigadevice.com/datasheet/gd25q256d/ [3]https://www.gigadevice.com/datasheet/gd25q256e/ > >> >> static const struct spi_nor_fixups gd25q256_fixups = { >> - .default_init = gd25q256_default_init, >> + .post_bfpt = gd25q256_post_bfpt, >> }; >> >> static const struct flash_info gigadevice_nor_parts[] = { >> -- >> 2.34.1 >> > > > -- > Cheers, > ta ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/ ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 0/1] mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt 2022-10-03 5:35 ` Tudor.Ambarus 2022-10-16 8:37 ` Yaliang Wang @ 2022-10-16 17:19 ` yaliang.wang 2022-10-16 17:19 ` [PATCH] " yaliang.wang 2022-11-21 14:32 ` [PATCH v2 0/1] " Tudor Ambarus 1 sibling, 2 replies; 8+ messages in thread From: yaliang.wang @ 2022-10-16 17:19 UTC (permalink / raw) To: tudor.ambarus, pratyush, michael, miquel.raynal, richard, vigneshr, andy.yan, cyrille.pitchen Cc: linux-mtd, linux-kernel GD25Q256 'C' generation 'GD25Q256C' implements the JESD216 standards, JESD216 doesn't define the QER field in BFPT, but the 'GD25Q256C' does define QE bit in status register 1 bit 6, so we need to tweak quad_enable to properly set the function. 'D' and 'E' generations implement the JESD216B standards, so parsing the SFDP to set quad_enable function is enough for them. As the default_init is deprecated, so the post_bfpt hook will be the right place to do this tweak. Changes since v1 [1] - Just tweak the quad_enable function when needed. Yaliang Wang (1): mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt drivers/mtd/spi-nor/gigadevice.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/ ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt 2022-10-16 17:19 ` [PATCH v2 0/1] " yaliang.wang @ 2022-10-16 17:19 ` yaliang.wang 2022-11-21 14:32 ` [PATCH v2 0/1] " Tudor Ambarus 1 sibling, 0 replies; 8+ messages in thread From: yaliang.wang @ 2022-10-16 17:19 UTC (permalink / raw) To: tudor.ambarus, pratyush, michael, miquel.raynal, richard, vigneshr, andy.yan, cyrille.pitchen Cc: linux-mtd, linux-kernel From: Yaliang Wang <Yaliang.Wang@windriver.com> When utilizing PARSE_SFDP to initialize the flash parameter, the deprecated initializing method spi_nor_init_params_deprecated() and the function spi_nor_manufacturer_init_params() within it will never be executed, which results in the default_init hook function will also never be executed. This is okay for 'D' generation of GD25Q256, because 'D' generation is implementing the JESD216B standards, it has QER field defined in BFPT, parsing the SFDP can properly set the quad_enable function. The 'E' generation also implements the JESD216B standards, and it has the same status register definitions as 'D' generation, parsing the SFDP to set the quad_enable function should also work for 'E' generation. However, the same thing can't apply to 'C' generation. 'C' generation 'GD25Q256C' implements the JESD216 standards, and it doesn't have the QER field defined in BFPT, since it does have QE bit in status register 1, the quad_enable hook needs to be tweaked to properly set the quad_enable function, this can be done in post_bfpt fixup hook. Cc: stable@vger.kernel.org Fixes: 047275f7de18 ("mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com> --- drivers/mtd/spi-nor/gigadevice.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c index 119b38e6fc2a..5fc5d2b2d15e 100644 --- a/drivers/mtd/spi-nor/gigadevice.c +++ b/drivers/mtd/spi-nor/gigadevice.c @@ -8,19 +8,33 @@ #include "core.h" -static void gd25q256_default_init(struct spi_nor *nor) +static int +gd25q256_post_bfpt(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt) { /* - * Some manufacturer like GigaDevice may use different - * bit to set QE on different memories, so the MFR can't - * indicate the quad_enable method for this case, we need - * to set it in the default_init fixup hook. + * GD25Q256 'C' generation 'GD25Q256C' implements the JESD216 + * standards, JESD216 doesn't define QER field in BFPT, but + * the 'GD25Q256C' does have QE bit defined in status register + * 1, this means parsing the BFPT can't properly set the + * quad_enable function, so we need to tweak the quad_enable + * function manually. + * + * GD25Q256 GENERATION|SFDP MAJOR VERSION|SFDP MINOR VERSION + * GD25Q256C |SFDP_JESD216_MAJOR|SFDP_JESD216_MINOR + * GD25Q256D |SFDP_JESD216_MAJOR|SFDP_JESD216B_MINOR + * GD25Q256E |SFDP_JESD216_MAJOR|SFDP_JESD216B_MINOR */ - nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable; + if (bfpt_header->major == SFDP_JESD216_MAJOR && + bfpt_header->minor == SFDP_JESD216_MINOR) + nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable; + + return 0; } static const struct spi_nor_fixups gd25q256_fixups = { - .default_init = gd25q256_default_init, + .post_bfpt = gd25q256_post_bfpt, }; static const struct flash_info gigadevice_nor_parts[] = { -- 2.34.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/ ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 0/1] mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt 2022-10-16 17:19 ` [PATCH v2 0/1] " yaliang.wang 2022-10-16 17:19 ` [PATCH] " yaliang.wang @ 2022-11-21 14:32 ` Tudor Ambarus 1 sibling, 0 replies; 8+ messages in thread From: Tudor Ambarus @ 2022-11-21 14:32 UTC (permalink / raw) To: pratyush, michael, yaliang.wang, richard, cyrille.pitchen, vigneshr, andy.yan, miquel.raynal Cc: Tudor Ambarus, linux-mtd, linux-kernel On Mon, 17 Oct 2022 01:19:00 +0800, yaliang.wang@windriver.com wrote: > GD25Q256 'C' generation 'GD25Q256C' implements the JESD216 standards, > JESD216 doesn't define the QER field in BFPT, but the 'GD25Q256C' > does define QE bit in status register 1 bit 6, so we need to tweak > quad_enable to properly set the function. > > 'D' and 'E' generations implement the JESD216B standards, so parsing > the SFDP to set quad_enable function is enough for them. > > [...] Updated comment in gd25q256_post_bfpt and applied to spi-nor/next, thanks! [1/1] mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt https://git.kernel.org/mtd/c/4dc49062a7e9 Best regards, -- Tudor Ambarus <tudor.ambarus@microchip.com> ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/ ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-11-21 14:36 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-09-13 8:40 [PATCH] mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt yaliang.wang [not found] ` <MN2PR17MB3375BC0E5878B19651475413B8479@MN2PR17MB3375.namprd17.prod.outlook.com> 2022-09-14 3:05 ` Yaliang Wang 2022-09-14 7:27 ` Michael Walle 2022-10-03 5:35 ` Tudor.Ambarus 2022-10-16 8:37 ` Yaliang Wang 2022-10-16 17:19 ` [PATCH v2 0/1] " yaliang.wang 2022-10-16 17:19 ` [PATCH] " yaliang.wang 2022-11-21 14:32 ` [PATCH v2 0/1] " Tudor Ambarus
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).