From: Tudor Ambarus <tudor.ambarus@microchip.com>
To: <p.yadav@ti.com>, <vigneshr@ti.com>, <boris.brezillon@collabora.com>
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
Tudor Ambarus <tudor.ambarus@microchip.com>
Subject: [RFC PATCH 3/3] mtd: spi-nor: Parse SFDP SCCR Map
Date: Tue, 29 Sep 2020 12:59:51 +0300 [thread overview]
Message-ID: <20200929095951.1575658-4-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20200929095951.1575658-1-tudor.ambarus@microchip.com>
Parse just the 22nd dword and look for the 'DTR Octal Mode Enable
Volatile bit'.
SPI_NOR_IO_MODE_EN_VOLATILE should be set just for the flashes
that don't define the optional SFDP SCCR Map. For the others,
let the SFDP do its job and fill the SNOR_F_IO_MODE_EN_VOLATILE
flag. We avoid this way polluting the flash flags when declaring
one.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
drivers/mtd/spi-nor/sfdp.c | 52 ++++++++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index f192710aca31..7bca64cbba02 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -21,6 +21,10 @@
#define SFDP_SECTOR_MAP_ID 0xff81 /* Sector Map Table */
#define SFDP_4BAIT_ID 0xff84 /* 4-byte Address Instruction Table */
#define SFDP_PROFILE1_ID 0xff05 /* xSPI Profile 1.0 table. */
+#define SFDP_SCCR_MAP_ID 0xff87 /*
+ * Status, Control and Configuration
+ * Register Map.
+ */
#define SFDP_SIGNATURE 0x50444653U
@@ -1199,6 +1203,50 @@ static int spi_nor_parse_profile1(struct spi_nor *nor,
return ret;
}
+#define SCCR_DWORD22_OCTAL_DTR_EN_VOLATILE BIT(31)
+
+/**
+ * spi_nor_parse_sccr() - Parse the Status, Control and Configuration Register
+ * Map.
+ * @nor: pointer to a 'struct spi_nor'
+ * @sccr_header: pointer to the 'struct sfdp_parameter_header' describing
+ * the SCCR Map table length and version.
+ * @params: pointer to the 'struct spi_nor_flash_parameter' to be.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_sccr(struct spi_nor *nor,
+ const struct sfdp_parameter_header *sccr_header,
+ struct spi_nor_flash_parameter *params)
+{
+ u32 *dwords, addr;
+ size_t len;
+ int ret;
+ u8 io_mode_en_volatile;
+
+ len = sccr_header->length * sizeof(*dwords);
+ dwords = kmalloc(len, GFP_KERNEL);
+ if (!dwords)
+ return -ENOMEM;
+
+ addr = SFDP_PARAM_HEADER_PTP(sccr_header);
+ ret = spi_nor_read_sfdp(nor, addr, len, dwords);
+ if (ret)
+ goto out;
+
+ le32_to_cpu_array(dwords, sccr_header->length);
+
+ io_mode_en_volatile = FIELD_GET(SCCR_DWORD22_OCTAL_DTR_EN_VOLATILE,
+ dwords[22]);
+
+ if (io_mode_en_volatile)
+ nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
+
+out:
+ kfree(dwords);
+ return ret;
+}
+
/**
* spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
* @nor: pointer to a 'struct spi_nor'
@@ -1304,6 +1352,10 @@ int spi_nor_parse_sfdp(struct spi_nor *nor,
err = spi_nor_parse_profile1(nor, param_header, params);
break;
+ case SFDP_SCCR_MAP_ID:
+ err = spi_nor_parse_sccr(nor, param_header, params);
+ break;
+
default:
break;
}
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2020-09-29 10:00 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-16 12:44 [PATCH v13 00/15] mtd: spi-nor: add xSPI Octal DTR support Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 01/15] mtd: spi-nor: core: use EOPNOTSUPP instead of ENOTSUPP Pratyush Yadav
2020-09-29 11:30 ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 02/15] mtd: spi-nor: core: add spi_nor_{read, write}_reg() helpers Pratyush Yadav
2020-09-29 11:38 ` [PATCH v13 02/15] mtd: spi-nor: core: add spi_nor_{read,write}_reg() helpers Tudor.Ambarus
2020-09-29 12:54 ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 03/15] mtd: spi-nor: core: add spi_nor_controller_ops_erase helper Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 04/15] mtd: spi-nor: add support for DTR protocol Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 05/15] mtd: spi-nor: sfdp: get command opcode extension type from BFPT Pratyush Yadav
2020-09-30 6:17 ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 06/15] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table Pratyush Yadav
2020-09-30 6:44 ` Tudor.Ambarus
2020-09-30 6:53 ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 07/15] mtd: spi-nor: core: use dummy cycle and address width info from SFDP Pratyush Yadav
2020-09-30 6:46 ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 08/15] mtd: spi-nor: core: do 2 byte reads for SR and FSR in DTR mode Pratyush Yadav
2020-09-30 6:50 ` Tudor.Ambarus
2020-09-30 6:55 ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 09/15] mtd: spi-nor: core: enable octal DTR mode when possible Pratyush Yadav
2020-09-29 11:26 ` Tudor.Ambarus
2020-09-29 12:51 ` Pratyush Yadav
2020-09-29 13:05 ` Tudor.Ambarus
2020-09-30 7:11 ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 10/15] mtd: spi-nor: sfdp: detect Soft Reset sequence support from BFPT Pratyush Yadav
2020-09-30 7:23 ` Tudor.Ambarus
2020-09-30 7:31 ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 11/15] mtd: spi-nor: core: perform a Soft Reset on shutdown Pratyush Yadav
2020-09-29 13:08 ` Pratyush Yadav
2020-09-30 7:32 ` Tudor.Ambarus
2020-09-30 7:43 ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 12/15] mtd: spi-nor: core: disable Octal DTR mode on suspend Pratyush Yadav
2020-09-30 7:40 ` Tudor.Ambarus
2020-09-30 7:44 ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 13/15] mtd: spi-nor: core: expose spi_nor_default_setup() in core.h Pratyush Yadav
2020-09-30 7:51 ` Tudor.Ambarus
2020-09-30 8:03 ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 14/15] mtd: spi-nor: spansion: add support for Cypress Semper flash Pratyush Yadav
2020-09-30 8:36 ` Tudor.Ambarus
2020-09-30 12:32 ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 15/15] mtd: spi-nor: micron-st: allow using MT35XU512ABA in Octal DTR mode Pratyush Yadav
2020-09-30 9:12 ` Tudor.Ambarus
2020-09-29 9:59 ` [RFC PATCH 0/3] mtd: spi-nor: Tackle stateful modes Tudor Ambarus
2020-09-29 9:59 ` [RFC PATCH 1/3] mtd: spi-nor: Introduce SNOR_F_IO_MODE_EN_VOLATILE Tudor Ambarus
2020-09-29 16:45 ` Vignesh Raghavendra
2020-09-29 9:59 ` [RFC PATCH 2/3] mtd: spi-nor: Introduce MTD_SPI_NOR_ALLOW_STATEFUL_MODES Tudor Ambarus
2020-09-29 16:45 ` Vignesh Raghavendra
2020-09-29 9:59 ` Tudor Ambarus [this message]
2020-09-30 9:57 ` [PATCH v13 00/15] mtd: spi-nor: add xSPI Octal DTR support Tudor.Ambarus
2020-09-30 12:01 ` Pratyush Yadav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200929095951.1575658-4-tudor.ambarus@microchip.com \
--to=tudor.ambarus@microchip.com \
--cc=boris.brezillon@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=p.yadav@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).