From: Vignesh Raghavendra <vigneshr@ti.com>
To: <Tudor.Ambarus@microchip.com>, <boris.brezillon@collabora.com>,
<marek.vasut@gmail.com>, <miquel.raynal@bootlin.com>,
<richard@nod.at>, <linux-mtd@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [RESEND PATCH v3 17/20] mtd: spi-nor: Bring flash params init together
Date: Tue, 27 Aug 2019 13:05:44 +0530 [thread overview]
Message-ID: <ac7d3f7d-b396-f011-a045-98f85819c968@ti.com> (raw)
In-Reply-To: <20190826120821.16351-18-tudor.ambarus@microchip.com>
On 26/08/19 5:39 PM, Tudor.Ambarus@microchip.com wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>
> Bring all flash parameters default initialization in
> spi_nor_legacy_params_init().
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
> ---
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Regards
Vignesh
> v3: collect R-b
>
> drivers/mtd/spi-nor/spi-nor.c | 29 +++++++++++------------------
> 1 file changed, 11 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 2699e999d21a..dcda96a20f6c 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -4453,6 +4453,7 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
> struct spi_nor_flash_parameter *params = &nor->params;
> struct spi_nor_erase_map *map = ¶ms->erase_map;
> const struct flash_info *info = nor->info;
> + struct device_node *np = spi_nor_get_flash_node(nor);
> u8 i, erase_mask;
>
> /* Initialize legacy flash parameters and settings. */
> @@ -4464,18 +4465,25 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
> params->size = (u64)info->sector_size * info->n_sectors;
> params->page_size = info->page_size;
>
> + if (!(info->flags & SPI_NOR_NO_FR)) {
> + /* Default to Fast Read for DT and non-DT platform devices. */
> + params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
> +
> + /* Mask out Fast Read if not requested at DT instantiation. */
> + if (np && !of_property_read_bool(np, "m25p,fast-read"))
> + params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
> + }
> +
> /* (Fast) Read settings. */
> params->hwcaps.mask |= SNOR_HWCAPS_READ;
> spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ],
> 0, 0, SPINOR_OP_READ,
> SNOR_PROTO_1_1_1);
>
> - if (!(info->flags & SPI_NOR_NO_FR)) {
> - params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
> + if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
> spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST],
> 0, 8, SPINOR_OP_READ_FAST,
> SNOR_PROTO_1_1_1);
> - }
>
> if (info->flags & SPI_NOR_DUAL_READ) {
> params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
> @@ -4864,24 +4872,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> nor->page_size = params->page_size;
> mtd->writebufsize = nor->page_size;
>
> - if (np) {
> - /* If we were instantiated by DT, use it */
> - if (of_property_read_bool(np, "m25p,fast-read"))
> - params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
> - else
> - params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
> - } else {
> - /* If we weren't instantiated by DT, default to fast-read */
> - params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
> - }
> -
> if (of_property_read_bool(np, "broken-flash-reset"))
> nor->flags |= SNOR_F_BROKEN_RESET;
>
> - /* Some devices cannot do fast-read, no matter what DT tells us */
> - if (info->flags & SPI_NOR_NO_FR)
> - params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
> -
> /*
> * Configure the SPI memory:
> * - select op codes for (Fast) Read, Page Program and Sector Erase.
>
--
Regards
Vignesh
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2019-08-27 7:35 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-26 12:08 [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 01/20] mtd: spi-nor: Regroup flash parameter and settings Tudor.Ambarus
2019-08-27 4:21 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 02/20] mtd: spi-nor: Use nor->params Tudor.Ambarus
2019-08-27 4:31 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 03/20] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' Tudor.Ambarus
2019-08-27 4:47 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 04/20] mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter' Tudor.Ambarus
2019-08-26 12:38 ` Boris Brezillon
2019-08-27 5:39 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 05/20] mtd: spi-nor: Add default_init() hook to tweak flash parameters Tudor.Ambarus
2019-08-27 5:48 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 06/20] mtd: spi-nor: Add a default_init() fixup hook for gd25q256 Tudor.Ambarus
2019-08-27 5:48 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 07/20] mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() Tudor.Ambarus
2019-08-27 5:54 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 08/20] mtd: spi-nor: Split spi_nor_init_params() Tudor.Ambarus
2019-08-27 6:00 ` Vignesh Raghavendra
2019-08-27 7:01 ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 09/20] mtd: spi-nor: Create a ->set_4byte() method Tudor.Ambarus
2019-08-27 6:07 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 10/20] mtd: spi-nor: Rework the SPI NOR lock/unlock logic Tudor.Ambarus
2019-08-27 6:36 ` Vignesh Raghavendra
2019-08-27 6:58 ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 11/20] mtd: spi-nor: Add post_sfdp() hook to tweak flash config Tudor.Ambarus
2019-08-27 7:08 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 12/20] mtd: spi-nor: Add spansion_post_sfdp_fixups() Tudor.Ambarus
2019-08-27 7:10 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 13/20] mtd: spi-nor: Add a ->convert_addr() method Tudor.Ambarus
2019-08-27 7:13 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 14/20] mtd: spi_nor: Add a ->setup() method Tudor.Ambarus
2019-08-26 12:40 ` Boris Brezillon
2019-08-26 13:38 ` Schrempf Frieder
2019-08-26 14:02 ` Boris Brezillon
2019-08-26 14:37 ` Schrempf Frieder
2019-08-27 7:16 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 15/20] mtd: spi-nor: Add s3an_post_sfdp_fixups() Tudor.Ambarus
2019-08-27 7:18 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 16/20] mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag Tudor.Ambarus
2019-08-27 7:48 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 17/20] mtd: spi-nor: Bring flash params init together Tudor.Ambarus
2019-08-27 7:35 ` Vignesh Raghavendra [this message]
2019-08-26 12:09 ` [RESEND PATCH v3 18/20] mtd: spi_nor: Introduce spi_nor_set_addr_width() Tudor.Ambarus
2019-08-27 7:37 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 19/20] mtd: spi-nor: Introduce spi_nor_get_flash_info() Tudor.Ambarus
2019-08-27 7:37 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND RFC PATCH v3 20/20] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
2019-08-26 12:49 ` Boris Brezillon
2019-08-27 5:33 ` [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Vignesh Raghavendra
2019-08-28 10:18 ` Tudor.Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ac7d3f7d-b396-f011-a045-98f85819c968@ti.com \
--to=vigneshr@ti.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=boris.brezillon@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).