From: Vignesh Raghavendra <vigneshr@ti.com>
To: <Tudor.Ambarus@microchip.com>, <boris.brezillon@collabora.com>,
<marek.vasut@gmail.com>, <miquel.raynal@bootlin.com>,
<richard@nod.at>, <linux-mtd@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core
Date: Tue, 27 Aug 2019 11:03:22 +0530 [thread overview]
Message-ID: <c70b4cc8-466d-3b20-2b0c-ff456f1b7b97@ti.com> (raw)
In-Reply-To: <20190826120821.16351-1-tudor.ambarus@microchip.com>
On 26/08/19 5:38 PM, Tudor.Ambarus@microchip.com wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
[...]
>
> Tested on sst26vf064b with atmel-quadspi SPIMEM driver.
>
Tested s25fl256s, mx66l51235l with ti-qspi and s25fl512s with
cadence-quadspi. n25q128a13 with legacy 1 bit SPI controller.
> Boris Brezillon (7):
> mtd: spi-nor: Add a default_init() fixup hook for gd25q256
> mtd: spi-nor: Create a ->set_4byte() method
> mtd: spi-nor: Rework the SPI NOR lock/unlock logic
> mtd: spi-nor: Add post_sfdp() hook to tweak flash config
> mtd: spi-nor: Add spansion_post_sfdp_fixups()
> mtd: spi-nor: Add a ->convert_addr() method
> mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag
>
> Tudor Ambarus (13):
> mtd: spi-nor: Regroup flash parameter and settings
> mtd: spi-nor: Use nor->params
> mtd: spi-nor: Drop quad_enable() from 'struct spi-nor'
> mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter'
> mtd: spi-nor: Add default_init() hook to tweak flash parameters
> mtd: spi_nor: Move manufacturer quad_enable() in ->default_init()
> mtd: spi-nor: Split spi_nor_init_params()
> mtd: spi_nor: Add a ->setup() method
> mtd: spi-nor: Add s3an_post_sfdp_fixups()
> mtd: spi-nor: Bring flash params init together
> mtd: spi_nor: Introduce spi_nor_set_addr_width()
> mtd: spi-nor: Introduce spi_nor_get_flash_info()
> mtd: spi-nor: Rework the disabling of block write protection
>
> drivers/mtd/spi-nor/spi-nor.c | 1304 +++++++++++++++++++++++------------------
> include/linux/mtd/spi-nor.h | 298 +++++++---
> 2 files changed, 927 insertions(+), 675 deletions(-)
>
--
Regards
Vignesh
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2019-08-27 5:33 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-26 12:08 [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 01/20] mtd: spi-nor: Regroup flash parameter and settings Tudor.Ambarus
2019-08-27 4:21 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 02/20] mtd: spi-nor: Use nor->params Tudor.Ambarus
2019-08-27 4:31 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 03/20] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' Tudor.Ambarus
2019-08-27 4:47 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 04/20] mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter' Tudor.Ambarus
2019-08-26 12:38 ` Boris Brezillon
2019-08-27 5:39 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 05/20] mtd: spi-nor: Add default_init() hook to tweak flash parameters Tudor.Ambarus
2019-08-27 5:48 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 06/20] mtd: spi-nor: Add a default_init() fixup hook for gd25q256 Tudor.Ambarus
2019-08-27 5:48 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 07/20] mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() Tudor.Ambarus
2019-08-27 5:54 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 08/20] mtd: spi-nor: Split spi_nor_init_params() Tudor.Ambarus
2019-08-27 6:00 ` Vignesh Raghavendra
2019-08-27 7:01 ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 09/20] mtd: spi-nor: Create a ->set_4byte() method Tudor.Ambarus
2019-08-27 6:07 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 10/20] mtd: spi-nor: Rework the SPI NOR lock/unlock logic Tudor.Ambarus
2019-08-27 6:36 ` Vignesh Raghavendra
2019-08-27 6:58 ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 11/20] mtd: spi-nor: Add post_sfdp() hook to tweak flash config Tudor.Ambarus
2019-08-27 7:08 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 12/20] mtd: spi-nor: Add spansion_post_sfdp_fixups() Tudor.Ambarus
2019-08-27 7:10 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 13/20] mtd: spi-nor: Add a ->convert_addr() method Tudor.Ambarus
2019-08-27 7:13 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 14/20] mtd: spi_nor: Add a ->setup() method Tudor.Ambarus
2019-08-26 12:40 ` Boris Brezillon
2019-08-26 13:38 ` Schrempf Frieder
2019-08-26 14:02 ` Boris Brezillon
2019-08-26 14:37 ` Schrempf Frieder
2019-08-27 7:16 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 15/20] mtd: spi-nor: Add s3an_post_sfdp_fixups() Tudor.Ambarus
2019-08-27 7:18 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 16/20] mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag Tudor.Ambarus
2019-08-27 7:48 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 17/20] mtd: spi-nor: Bring flash params init together Tudor.Ambarus
2019-08-27 7:35 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 18/20] mtd: spi_nor: Introduce spi_nor_set_addr_width() Tudor.Ambarus
2019-08-27 7:37 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 19/20] mtd: spi-nor: Introduce spi_nor_get_flash_info() Tudor.Ambarus
2019-08-27 7:37 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND RFC PATCH v3 20/20] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
2019-08-26 12:49 ` Boris Brezillon
2019-08-27 5:33 ` Vignesh Raghavendra [this message]
2019-08-28 10:18 ` [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Tudor.Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c70b4cc8-466d-3b20-2b0c-ff456f1b7b97@ti.com \
--to=vigneshr@ti.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=boris.brezillon@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).