linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
Cc: "Z.q. Hou" <zhiqiang.hou@nxp.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	Leo Li <leoyang.li@nxp.com>,
	"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
	"will.deacon@arm.com" <will.deacon@arm.com>,
	Mingkai Hu <mingkai.hu@nxp.com>,
	"M.h. Lian" <minghuan.lian@nxp.com>,
	Xiaowei Bao <xiaowei.bao@nxp.com>
Subject: Re: [PATCHv3 01/27] PCI: mobiveil: uniform the register accessors
Date: Tue, 5 Feb 2019 17:43:16 +0000	[thread overview]
Message-ID: <20190205174316.GA12956@e107981-ln.cambridge.arm.com> (raw)
In-Reply-To: <CAFZiPx0wA5=juO0PnuMKY_mJSPD12W09Vy+buW_EyQAKzZkjKw@mail.gmail.com>

On Tue, Feb 05, 2019 at 11:09:19AM +0530, Subrahmanya Lingappa wrote:
> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>

I have a feeling you do not read what I write. Please never top-post.

Read this, especially the email etiquette section:

https://kernelnewbies.org/PatchCulture

> 
> 
> 
> On Tue, Jan 29, 2019 at 1:38 PM Z.q. Hou <zhiqiang.hou@nxp.com> wrote:
> >
> > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> >
> > It's confused that R/W some registers by csr_readl()/csr_writel(),
> > while others by read_paged_register()/write_paged_register().
> > Actually the low 3KB of 4KB PCIe configure space can be accessed
> > directly and high 1KB is paging area. So this patch uniformed the
> > register accessors to csr_readl() and csr_writel() by comparing
> > the register offset with page access boundary 3KB in the accessor
> > internal.
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
> > ---
> > V3:
> >  - No change
> >
> >  drivers/pci/controller/pcie-mobiveil.c | 179 +++++++++++++++++--------
> >  1 file changed, 124 insertions(+), 55 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
> > index 77052a0712d0..d55c7e780c6e 100644
> > --- a/drivers/pci/controller/pcie-mobiveil.c
> > +++ b/drivers/pci/controller/pcie-mobiveil.c
> > @@ -47,7 +47,6 @@
> >  #define  PAGE_SEL_SHIFT        13
> >  #define  PAGE_SEL_MASK         0x3f
> >  #define  PAGE_LO_MASK          0x3ff
> > -#define  PAGE_SEL_EN           0xc00
> >  #define  PAGE_SEL_OFFSET_SHIFT 10
> >
> >  #define PAB_AXI_PIO_CTRL       0x0840
> > @@ -117,6 +116,12 @@
> >  #define LINK_WAIT_MIN  90000
> >  #define LINK_WAIT_MAX  100000
> >
> > +#define PAGED_ADDR_BNDRY                       0xc00
> > +#define OFFSET_TO_PAGE_ADDR(off)               \
> > +       ((off & PAGE_LO_MASK) | PAGED_ADDR_BNDRY)
> > +#define OFFSET_TO_PAGE_IDX(off)                        \
> > +       ((off >> PAGE_SEL_OFFSET_SHIFT) & PAGE_SEL_MASK)
> > +
> >  struct mobiveil_msi {                  /* MSI information */
> >         struct mutex lock;              /* protect bitmap variable */
> >         struct irq_domain *msi_domain;
> > @@ -145,15 +150,119 @@ struct mobiveil_pcie {
> >         struct mobiveil_msi msi;
> >  };
> >
> > -static inline void csr_writel(struct mobiveil_pcie *pcie, const u32 value,
> > -               const u32 reg)
> > +/*
> > + * mobiveil_pcie_sel_page - routine to access paged register
> > + *
> > + * Registers whose address greater than PAGED_ADDR_BNDRY (0xc00) are paged,
> > + * for this scheme to work extracted higher 6 bits of the offset will be
> > + * written to pg_sel field of PAB_CTRL register and rest of the lower 10
> > + * bits enabled with PAGED_ADDR_BNDRY are used as offset of the register.
> > + */
> > +static void mobiveil_pcie_sel_page(struct mobiveil_pcie *pcie, u8 pg_idx)
> >  {
> > -       writel_relaxed(value, pcie->csr_axi_slave_base + reg);
> > +       u32 val;
> > +
> > +       val = readl(pcie->csr_axi_slave_base + PAB_CTRL);
> > +       val &= ~(PAGE_SEL_MASK << PAGE_SEL_SHIFT);
> > +       val |= (pg_idx & PAGE_SEL_MASK) << PAGE_SEL_SHIFT;
> > +
> > +       writel(val, pcie->csr_axi_slave_base + PAB_CTRL);
> >  }
> >
> > -static inline u32 csr_readl(struct mobiveil_pcie *pcie, const u32 reg)
> > +static void *mobiveil_pcie_comp_addr(struct mobiveil_pcie *pcie, u32 off)
> >  {
> > -       return readl_relaxed(pcie->csr_axi_slave_base + reg);
> > +       if (off < PAGED_ADDR_BNDRY) {
> > +               /* For directly accessed registers, clear the pg_sel field */
> > +               mobiveil_pcie_sel_page(pcie, 0);
> > +               return pcie->csr_axi_slave_base + off;
> > +       }
> > +
> > +       mobiveil_pcie_sel_page(pcie, OFFSET_TO_PAGE_IDX(off));
> > +       return pcie->csr_axi_slave_base + OFFSET_TO_PAGE_ADDR(off);
> > +}
> > +
> > +static int mobiveil_pcie_read(void __iomem *addr, int size, u32 *val)
> > +{
> > +       if ((uintptr_t)addr & (size - 1)) {
> > +               *val = 0;
> > +               return PCIBIOS_BAD_REGISTER_NUMBER;
> > +       }
> > +
> > +       switch (size) {
> > +       case 4:
> > +               *val = readl(addr);
> > +               break;
> > +       case 2:
> > +               *val = readw(addr);
> > +               break;
> > +       case 1:
> > +               *val = readb(addr);
> > +               break;
> > +       default:
> > +               *val = 0;
> > +               return PCIBIOS_BAD_REGISTER_NUMBER;
> > +       }
> > +
> > +       return PCIBIOS_SUCCESSFUL;
> > +}
> > +
> > +static int mobiveil_pcie_write(void __iomem *addr, int size, u32 val)
> > +{
> > +       if ((uintptr_t)addr & (size - 1))
> > +               return PCIBIOS_BAD_REGISTER_NUMBER;
> > +
> > +       switch (size) {
> > +       case 4:
> > +               writel(val, addr);
> > +               break;
> > +       case 2:
> > +               writew(val, addr);
> > +               break;
> > +       case 1:
> > +               writeb(val, addr);
> > +               break;
> > +       default:
> > +               return PCIBIOS_BAD_REGISTER_NUMBER;
> > +       }
> > +
> > +       return PCIBIOS_SUCCESSFUL;
> > +}
> > +
> > +static u32 csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size)
> > +{
> > +       void *addr;
> > +       u32 val;
> > +       int ret;
> > +
> > +       addr = mobiveil_pcie_comp_addr(pcie, off);
> > +
> > +       ret = mobiveil_pcie_read(addr, size, &val);
> > +       if (ret)
> > +               dev_err(&pcie->pdev->dev, "read CSR address failed\n");
> > +
> > +       return val;
> > +}
> > +
> > +static void csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off, size_t size)
> > +{
> > +       void *addr;
> > +       int ret;
> > +
> > +       addr = mobiveil_pcie_comp_addr(pcie, off);
> > +
> > +       ret = mobiveil_pcie_write(addr, size, val);
> > +       if (ret)
> > +               dev_err(&pcie->pdev->dev, "write CSR address failed\n");
> > +}
> > +
> > +static u32 csr_readl(struct mobiveil_pcie *pcie, u32 off)
> > +{
> > +       return csr_read(pcie, off, 0x4);
> > +}
> > +
> > +static void csr_writel(struct mobiveil_pcie *pcie, u32 val, u32 off)
> > +{
> > +       csr_write(pcie, val, off, 0x4);
> >  }
> >
> >  static bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie)
> > @@ -342,45 +451,6 @@ static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
> >         return 0;
> >  }
> >
> > -/*
> > - * select_paged_register - routine to access paged register of root complex
> > - *
> > - * registers of RC are paged, for this scheme to work
> > - * extracted higher 6 bits of the offset will be written to pg_sel
> > - * field of PAB_CTRL register and rest of the lower 10 bits enabled with
> > - * PAGE_SEL_EN are used as offset of the register.
> > - */
> > -static void select_paged_register(struct mobiveil_pcie *pcie, u32 offset)
> > -{
> > -       int pab_ctrl_dw, pg_sel;
> > -
> > -       /* clear pg_sel field */
> > -       pab_ctrl_dw = csr_readl(pcie, PAB_CTRL);
> > -       pab_ctrl_dw = (pab_ctrl_dw & ~(PAGE_SEL_MASK << PAGE_SEL_SHIFT));
> > -
> > -       /* set pg_sel field */
> > -       pg_sel = (offset >> PAGE_SEL_OFFSET_SHIFT) & PAGE_SEL_MASK;
> > -       pab_ctrl_dw |= ((pg_sel << PAGE_SEL_SHIFT));
> > -       csr_writel(pcie, pab_ctrl_dw, PAB_CTRL);
> > -}
> > -
> > -static void write_paged_register(struct mobiveil_pcie *pcie,
> > -               u32 val, u32 offset)
> > -{
> > -       u32 off = (offset & PAGE_LO_MASK) | PAGE_SEL_EN;
> > -
> > -       select_paged_register(pcie, offset);
> > -       csr_writel(pcie, val, off);
> > -}
> > -
> > -static u32 read_paged_register(struct mobiveil_pcie *pcie, u32 offset)
> > -{
> > -       u32 off = (offset & PAGE_LO_MASK) | PAGE_SEL_EN;
> > -
> > -       select_paged_register(pcie, offset);
> > -       return csr_readl(pcie, off);
> > -}
> > -
> >  static void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
> >                 int pci_addr, u32 type, u64 size)
> >  {
> > @@ -397,19 +467,19 @@ static void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
> >         pio_ctrl_val = csr_readl(pcie, PAB_PEX_PIO_CTRL);
> >         csr_writel(pcie,
> >                 pio_ctrl_val | (1 << PIO_ENABLE_SHIFT), PAB_PEX_PIO_CTRL);
> > -       amap_ctrl_dw = read_paged_register(pcie, PAB_PEX_AMAP_CTRL(win_num));
> > +       amap_ctrl_dw = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
> >         amap_ctrl_dw = (amap_ctrl_dw | (type << AMAP_CTRL_TYPE_SHIFT));
> >         amap_ctrl_dw = (amap_ctrl_dw | (1 << AMAP_CTRL_EN_SHIFT));
> >
> > -       write_paged_register(pcie, amap_ctrl_dw | lower_32_bits(size64),
> > -                               PAB_PEX_AMAP_CTRL(win_num));
> > +       csr_writel(pcie, amap_ctrl_dw | lower_32_bits(size64),
> > +                  PAB_PEX_AMAP_CTRL(win_num));
> >
> > -       write_paged_register(pcie, upper_32_bits(size64),
> > -                               PAB_EXT_PEX_AMAP_SIZEN(win_num));
> > +       csr_writel(pcie, upper_32_bits(size64),
> > +                  PAB_EXT_PEX_AMAP_SIZEN(win_num));
> >
> > -       write_paged_register(pcie, pci_addr, PAB_PEX_AMAP_AXI_WIN(win_num));
> > -       write_paged_register(pcie, pci_addr, PAB_PEX_AMAP_PEX_WIN_L(win_num));
> > -       write_paged_register(pcie, 0, PAB_PEX_AMAP_PEX_WIN_H(win_num));
> > +       csr_writel(pcie, pci_addr, PAB_PEX_AMAP_AXI_WIN(win_num));
> > +       csr_writel(pcie, pci_addr, PAB_PEX_AMAP_PEX_WIN_L(win_num));
> > +       csr_writel(pcie, 0, PAB_PEX_AMAP_PEX_WIN_H(win_num));
> >  }
> >
> >  /*
> > @@ -437,8 +507,7 @@ static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
> >         csr_writel(pcie, 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
> >                         lower_32_bits(size64), PAB_AXI_AMAP_CTRL(win_num));
> >
> > -       write_paged_register(pcie, upper_32_bits(size64),
> > -                               PAB_EXT_AXI_AMAP_SIZE(win_num));
> > +       csr_writel(pcie, upper_32_bits(size64), PAB_EXT_AXI_AMAP_SIZE(win_num));
> >
> >         /*
> >          * program AXI window base with appropriate value in
> > --
> > 2.17.1
> >

  reply	other threads:[~2019-02-05 17:43 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-29  8:08 [PATCHv3 00/27] PCI: refactor Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Z.q. Hou
2019-01-29  8:08 ` [PATCHv3 01/27] PCI: mobiveil: uniform the register accessors Z.q. Hou
2019-02-05  5:39   ` Subrahmanya Lingappa
2019-02-05 17:43     ` Lorenzo Pieralisi [this message]
2019-02-06 10:59       ` Subrahmanya Lingappa
2019-01-29  8:08 ` [PATCHv3 02/27] PCI: mobiveil: format the code without function change Z.q. Hou
2019-02-05  5:48   ` Subrahmanya Lingappa
2019-02-18  7:03     ` Z.q. Hou
2019-01-29  8:08 ` [PATCHv3 03/27] PCI: mobiveil: correct the returned error number Z.q. Hou
2019-02-05  5:53   ` Subrahmanya Lingappa
2019-01-29  8:08 ` [PATCHv3 04/27] PCI: mobiveil: remove flag MSI_FLAG_MULTI_PCI_MSI Z.q. Hou
2019-02-05  6:05   ` Subrahmanya Lingappa
2019-02-18  7:03     ` Z.q. Hou
2019-01-29  8:09 ` [PATCHv3 05/27] PCI: mobiveil: correct PCI base address in MEM/IO outbound windows Z.q. Hou
2019-02-05  6:06   ` Subrahmanya Lingappa
2019-01-29  8:09 ` [PATCHv3 06/27] PCI: mobiveil: replace the resource list iteration function Z.q. Hou
2019-02-05  6:07   ` Subrahmanya Lingappa
2019-01-29  8:09 ` [PATCHv3 07/27] PCI: mobiveil: use WIN_NUM_0 explicitly for CFG outbound window Z.q. Hou
2019-02-05  6:08   ` Subrahmanya Lingappa
2019-01-29  8:09 ` [PATCHv3 08/27] PCI: mobiveil: use the 1st inbound window for MEM inbound transactions Z.q. Hou
2019-02-05  6:08   ` Subrahmanya Lingappa
2019-01-29  8:09 ` [PATCHv3 09/27] PCI: mobiveil: correct inbound/outbound window setup routines Z.q. Hou
2019-02-05  6:10   ` Subrahmanya Lingappa
2019-02-18  7:07     ` Z.q. Hou
2019-01-29  8:09 ` [PATCHv3 10/27] PCI: mobiveil: fix the INTx process error Z.q. Hou
2019-02-05  6:11   ` Subrahmanya Lingappa
2019-01-29  8:09 ` [PATCHv3 11/27] PCI: mobiveil: only fix up the Class Code field Z.q. Hou
2019-02-05  6:11   ` Subrahmanya Lingappa
2019-01-29  8:09 ` [PATCHv3 12/27] PCI: mobiveil: move out the link up waiting from mobiveil_host_init Z.q. Hou
2019-02-05  6:12   ` Subrahmanya Lingappa
2019-01-29  8:09 ` [PATCHv3 13/27] PCI: mobiveil: move irq chained handler setup out of DT parse Z.q. Hou
2019-02-08 12:30   ` Subrahmanya Lingappa
2019-01-29  8:09 ` [PATCHv3 14/27] PCI: mobiveil: initialize Primary/Secondary/Subordinate bus number Z.q. Hou
2019-02-08 12:31   ` Subrahmanya Lingappa
2019-01-29  8:10 ` [PATCHv3 15/27] dt-bindings: pci: mobiveil: change gpio_slave and apb_csr to optional Z.q. Hou
2019-02-08 12:32   ` Subrahmanya Lingappa
2019-01-29  8:10 ` [PATCHv3 16/27] PCI: mobiveil: refactor Mobiveil PCIe Host Bridge IP driver Z.q. Hou
2019-02-08 12:37   ` Subrahmanya Lingappa
2019-01-29  8:10 ` [PATCHv3 17/27] PCI: mobiveil: fix the checking of valid device Z.q. Hou
2019-02-08 12:41   ` Subrahmanya Lingappa
2019-02-08 14:13     ` Bjorn Helgaas
2019-02-18  7:15       ` Z.q. Hou
2019-02-18  7:04     ` Z.q. Hou
2019-01-29  8:10 ` [PATCHv3 18/27] PCI: mobiveil: continue to initialize the host upon no PCIe link Z.q. Hou
2019-02-08 12:41   ` Subrahmanya Lingappa
2019-01-29  8:10 ` [PATCHv3 19/27] PCI: mobiveil: disabled IB and OB windows set by bootloader Z.q. Hou
2019-02-08 12:42   ` Subrahmanya Lingappa
2019-01-29  8:10 ` [PATCHv3 20/27] PCI: mobiveil: add Byte and Half-Word width register accessors Z.q. Hou
2019-02-08 12:44   ` Subrahmanya Lingappa
2019-01-29  8:10 ` [PATCHv3 21/27] PCI: mobiveil: make mobiveil_host_init can be used to re-init host Z.q. Hou
2019-02-08 12:46   ` Subrahmanya Lingappa
2019-01-29  8:10 ` [PATCHv3 22/27] dt-bindings: pci: Add NXP Layerscape SoCs PCIe Gen4 controller Z.q. Hou
2019-01-30 18:49   ` Rob Herring
2019-01-29  8:10 ` [PATCHv3 23/27] PCI: mobiveil: add PCIe Gen4 RC driver for NXP Layerscape SoCs Z.q. Hou
2019-02-08 12:49   ` Subrahmanya Lingappa
2019-02-18  7:05     ` Z.q. Hou
2019-01-29  8:11 ` [PATCHv3 24/27] PCI: mobiveil: ls_pcie_g4: add Workaround for A-011577 Z.q. Hou
2019-02-08 12:52   ` Subrahmanya Lingappa
2019-02-18  7:10     ` Z.q. Hou
2019-01-29  8:11 ` [PATCHv3 25/27] PCI: mobiveil: ls_pcie_g4: add Workaround for A-011451 Z.q. Hou
2019-02-08 12:53   ` Subrahmanya Lingappa
2019-02-18  7:14     ` Z.q. Hou
2019-01-29  8:11 ` [PATCHv3 26/27] arm64: dts: freescale: lx2160a: add pcie DT nodes Z.q. Hou
2019-01-29  8:11 ` [PATCHv3 27/27] arm64: defconfig: Enable CONFIG_PCI_LAYERSCAPE_GEN4 Z.q. Hou
2019-01-29 11:39 ` [PATCHv3 00/27] PCI: refactor Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Lorenzo Pieralisi
     [not found]   ` <CAFZiPx002HED+YH2GysS7a7uoEDQuHGjxa_CQtwb9nSDH-XNuA@mail.gmail.com>
2019-02-04 16:13     ` Lorenzo Pieralisi
2019-02-04 16:51       ` Subrahmanya Lingappa
2019-01-30 15:34 ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190205174316.GA12956@e107981-ln.cambridge.arm.com \
    --to=lorenzo.pieralisi@arm.com \
    --cc=bhelgaas@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=l.subrahmanya@mobiveil.co.in \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=minghuan.lian@nxp.com \
    --cc=mingkai.hu@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=will.deacon@arm.com \
    --cc=xiaowei.bao@nxp.com \
    --cc=zhiqiang.hou@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).