linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vidya Sagar <vidyas@nvidia.com>
To: <lorenzo.pieralisi@arm.com>, <bhelgaas@google.com>,
	<robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<kishon@ti.com>, <catalin.marinas@arm.com>, <will.deacon@arm.com>,
	<jingoohan1@gmail.com>, <gustavo.pimentel@synopsys.com>
Cc: <digetx@gmail.com>, <mperttunen@nvidia.com>,
	<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <kthota@nvidia.com>,
	<mmaddireddy@nvidia.com>, <vidyas@nvidia.com>,
	<sagar.tv@gmail.com>
Subject: [PATCH V10 13/15] phy: tegra: Add PCIe PIPE2UPHY support
Date: Wed, 12 Jun 2019 15:23:37 +0530	[thread overview]
Message-ID: <20190612095339.20118-14-vidyas@nvidia.com> (raw)
In-Reply-To: <20190612095339.20118-1-vidyas@nvidia.com>

Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface
with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module.
For each PCIe lane of a controller, there is a P2U unit instantiated at
hardware level. This driver provides support for the programming required
for each P2U that is going to be used for a PCIe controller.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
---
Changes since [v9]:
* Used _relaxed() versions of readl() & writel()

Changes since [v8]:
* Made it dependent on ARCH_TEGRA_194_SOC directly instead of ARCH_TEGRA

Changes since [v7]:
* Changed P2U driver file name from pcie-p2u-tegra194.c to phy-tegra194-p2u.c

Changes since [v6]:
* None

Changes since [v5]:
* Addressed review comments from Thierry

Changes since [v4]:
* None

Changes since [v3]:
* Rebased on top of linux-next top of the tree

Changes since [v2]:
* Replaced spaces with tabs in Kconfig file
* Sorted header file inclusion alphabetically

Changes since [v1]:
* Added COMPILE_TEST in Kconfig
* Removed empty phy_ops implementations
* Modified code according to DT documentation file modifications

 drivers/phy/tegra/Kconfig            |   7 ++
 drivers/phy/tegra/Makefile           |   1 +
 drivers/phy/tegra/phy-tegra194-p2u.c | 120 +++++++++++++++++++++++++++
 3 files changed, 128 insertions(+)
 create mode 100644 drivers/phy/tegra/phy-tegra194-p2u.c

diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig
index e516967d695b..f9817c3ae85f 100644
--- a/drivers/phy/tegra/Kconfig
+++ b/drivers/phy/tegra/Kconfig
@@ -7,3 +7,10 @@ config PHY_TEGRA_XUSB
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called phy-tegra-xusb.
+
+config PHY_TEGRA194_P2U
+	tristate "NVIDIA Tegra194 PIPE2UPHY PHY driver"
+	depends on ARCH_TEGRA_194_SOC || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this to support the P2U (PIPE to UPHY) that is part of Tegra 19x SOCs.
diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
index 64ccaeacb631..320dd389f34d 100644
--- a/drivers/phy/tegra/Makefile
+++ b/drivers/phy/tegra/Makefile
@@ -6,3 +6,4 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
 phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
 phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
 phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o
+obj-$(CONFIG_PHY_TEGRA194_P2U) += phy-tegra194-p2u.o
diff --git a/drivers/phy/tegra/phy-tegra194-p2u.c b/drivers/phy/tegra/phy-tegra194-p2u.c
new file mode 100644
index 000000000000..df009abd2482
--- /dev/null
+++ b/drivers/phy/tegra/phy-tegra194-p2u.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * P2U (PIPE to UPHY) driver for Tegra T194 SoC
+ *
+ * Copyright (C) 2019 NVIDIA Corporation.
+ *
+ * Author: Vidya Sagar <vidyas@nvidia.com>
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+
+#define P2U_PERIODIC_EQ_CTRL_GEN3	0xc0
+#define P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN		BIT(0)
+#define P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN	BIT(1)
+#define P2U_PERIODIC_EQ_CTRL_GEN4	0xc4
+#define P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN	BIT(1)
+
+#define P2U_RX_DEBOUNCE_TIME				0xa4
+#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK	0xffff
+#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL		160
+
+struct tegra_p2u {
+	void __iomem *base;
+};
+
+static inline void p2u_writel(struct tegra_p2u *phy, const u32 value,
+			      const u32 reg)
+{
+	writel_relaxed(value, phy->base + reg);
+}
+
+static inline u32 p2u_readl(struct tegra_p2u *phy, const u32 reg)
+{
+	return readl_relaxed(phy->base + reg);
+}
+
+static int tegra_p2u_power_on(struct phy *x)
+{
+	struct tegra_p2u *phy = phy_get_drvdata(x);
+	u32 val;
+
+	val = p2u_readl(phy, P2U_PERIODIC_EQ_CTRL_GEN3);
+	val &= ~P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN;
+	val |= P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN;
+	p2u_writel(phy, val, P2U_PERIODIC_EQ_CTRL_GEN3);
+
+	val = p2u_readl(phy, P2U_PERIODIC_EQ_CTRL_GEN4);
+	val |= P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN;
+	p2u_writel(phy, val, P2U_PERIODIC_EQ_CTRL_GEN4);
+
+	val = p2u_readl(phy, P2U_RX_DEBOUNCE_TIME);
+	val &= ~P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK;
+	val |= P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL;
+	p2u_writel(phy, val, P2U_RX_DEBOUNCE_TIME);
+
+	return 0;
+}
+
+static const struct phy_ops ops = {
+	.power_on = tegra_p2u_power_on,
+	.owner = THIS_MODULE,
+};
+
+static int tegra_p2u_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct phy *generic_phy;
+	struct tegra_p2u *phy;
+	struct resource *res;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctl");
+	phy->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(phy->base))
+		return PTR_ERR_OR_ZERO(phy->base);
+
+	platform_set_drvdata(pdev, phy);
+
+	generic_phy = devm_phy_create(dev, NULL, &ops);
+	if (IS_ERR(generic_phy))
+		return PTR_ERR_OR_ZERO(generic_phy);
+
+	phy_set_drvdata(generic_phy, phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR_OR_ZERO(phy_provider);
+
+	return 0;
+}
+
+static const struct of_device_id tegra_p2u_id_table[] = {
+	{
+		.compatible = "nvidia,tegra194-p2u",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, tegra_p2u_id_table);
+
+static struct platform_driver tegra_p2u_driver = {
+	.probe = tegra_p2u_probe,
+	.driver = {
+		.name = "tegra194-p2u",
+		.of_match_table = tegra_p2u_id_table,
+	},
+};
+module_platform_driver(tegra_p2u_driver);
+
+MODULE_AUTHOR("Vidya Sagar <vidyas@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra194 PIPE2UPHY PHY driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


  parent reply	other threads:[~2019-06-12  9:56 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-12  9:53 [PATCH V10 00/15] Add Tegra194 PCIe support Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 01/15] PCI: Add #defines for some of PCIe spec r4.0 features Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 02/15] PCI: Disable MSI for Tegra194 root port Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 03/15] PCI: dwc: Perform dbi regs write lock towards the end Vidya Sagar
2019-06-18  6:34   ` Jingoo Han
2019-06-12  9:53 ` [PATCH V10 04/15] PCI: dwc: Move config space capability search API Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 05/15] PCI: dwc: Add ext " Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 06/15] dt-bindings: PCI: designware: Add binding for CDM register check Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 07/15] PCI: dwc: Add support to enable " Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 08/15] dt-bindings: Add PCIe supports-clkreq property Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 09/15] dt-bindings: PCI: tegra: Add device tree support for Tegra194 Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 10/15] dt-bindings: PHY: P2U: Add Tegra194 P2U block Vidya Sagar
2019-06-20  7:22   ` Kishon Vijay Abraham I
2019-06-12  9:53 ` [PATCH V10 11/15] arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT Vidya Sagar
2019-06-20 10:55   ` Thierry Reding
2019-06-24  7:32     ` Vidya Sagar
2019-06-25  7:33       ` Thierry Reding
2019-06-12  9:53 ` [PATCH V10 12/15] arm64: tegra: Enable PCIe slots in P2972-0000 board Vidya Sagar
2019-06-20 11:01   ` Thierry Reding
2019-06-12  9:53 ` Vidya Sagar [this message]
2019-06-20  7:24   ` [PATCH V10 13/15] phy: tegra: Add PCIe PIPE2UPHY support Kishon Vijay Abraham I
2019-06-20 23:23     ` Dmitry Osipenko
2019-06-22 17:56       ` Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 14/15] PCI: tegra: Add Tegra194 PCIe support Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 15/15] arm64: Add Tegra194 PCIe driver to defconfig Vidya Sagar
2019-06-20 11:03   ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190612095339.20118-14-vidyas@nvidia.com \
    --to=vidyas@nvidia.com \
    --cc=bhelgaas@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=digetx@gmail.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=kthota@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mmaddireddy@nvidia.com \
    --cc=mperttunen@nvidia.com \
    --cc=robh+dt@kernel.org \
    --cc=sagar.tv@gmail.com \
    --cc=thierry.reding@gmail.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).