linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: linux-cxl@vger.kernel.org
Cc: nvdimm@lists.linux.dev, linux-pci@vger.kernel.org,
	patches@lists.linux.dev, hch@lst.de,
	Dan Williams <dan.j.williams@intel.com>,
	Ben Widawsky <bwidawsk@kernel.org>
Subject: [PATCH 38/46] cxl/region: Enable the assignment of endpoint decoders to regions
Date: Thu, 23 Jun 2022 21:19:42 -0700	[thread overview]
Message-ID: <20220624041950.559155-13-dan.j.williams@intel.com> (raw)
In-Reply-To: <165603869943.551046.3498980330327696732.stgit@dwillia2-xfh>

The region provisioning process involves allocating DPA to a set of
endpoint decoders, and HPA plus the region geometry to a region device.
Then the decoder is assigned to the region. At this point several
validation steps can be performed to validate that the decoder is
suitable to participate in the region.

Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 Documentation/ABI/testing/sysfs-bus-cxl |  19 ++
 drivers/cxl/core/core.h                 |   6 +
 drivers/cxl/core/hdm.c                  |  13 +-
 drivers/cxl/core/port.c                 |  12 +-
 drivers/cxl/core/region.c               | 286 +++++++++++++++++++++++-
 drivers/cxl/cxl.h                       |  11 +
 6 files changed, 342 insertions(+), 5 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
index 3658facc9944..f1b74a71927d 100644
--- a/Documentation/ABI/testing/sysfs-bus-cxl
+++ b/Documentation/ABI/testing/sysfs-bus-cxl
@@ -319,3 +319,22 @@ Description:
 		size attribute, the resulting physical address space determined
 		by the driver is reflected here. It is therefore not useful to
 		read this before writing a value to the size attribute.
+
+
+What:		/sys/bus/cxl/devices/regionZ/target[0..N]
+Date:		May, 2022
+KernelVersion:	v5.20
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) Write an endpoint decoder object name to 'targetX' where X
+		is the intended position of the endpoint device in the region
+		interleave and N is the 'interleave_ways' setting for the
+		region. ENXIO is returned if the write results in an impossible
+		to map decode scenario, like the endpoint is unreachable at that
+		position relative to the root decoder interleave. EBUSY is
+		returned if the position in the region is already occupied, or
+		if the region is not in a state to accept interleave
+		configuration changes. EINVAL is returned if the object name is
+		not an endpoint decoder. Once all positions have been
+		successfully written a final validation for decode conflicts is
+		performed before activating the region.
diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h
index ebe6197fb9b8..36b6bd8dac2b 100644
--- a/drivers/cxl/core/core.h
+++ b/drivers/cxl/core/core.h
@@ -12,12 +12,17 @@ extern struct attribute_group cxl_base_attribute_group;
 #ifdef CONFIG_CXL_REGION
 extern struct device_attribute dev_attr_create_pmem_region;
 extern struct device_attribute dev_attr_delete_region;
+extern struct device_attribute dev_attr_region;
+void cxl_decoder_kill_region(struct cxl_endpoint_decoder *cxled);
 /*
  * Note must be used at the end of an attribute list, since it
  * terminates the list in the CONFIG_CXL_REGION=n case.
  */
 #define CXL_REGION_ATTR(x) (&dev_attr_##x.attr)
 #else
+static inline void cxl_decoder_kill_region(struct cxl_endpoint_decoder *cxled)
+{
+}
 #define CXL_REGION_ATTR(x) NULL
 #endif
 
@@ -35,6 +40,7 @@ int cxl_dpa_alloc(struct cxl_endpoint_decoder *cxled, unsigned long long size);
 int cxl_dpa_free(struct cxl_endpoint_decoder *cxled);
 resource_size_t cxl_dpa_size(struct cxl_endpoint_decoder *cxled);
 resource_size_t cxl_dpa_resource(struct cxl_endpoint_decoder *cxled);
+extern struct rw_semaphore cxl_dpa_rwsem;
 
 int cxl_memdev_init(void);
 void cxl_memdev_exit(void);
diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
index 7b58f6911523..2ee62dde8b23 100644
--- a/drivers/cxl/core/hdm.c
+++ b/drivers/cxl/core/hdm.c
@@ -8,7 +8,7 @@
 #include "cxlmem.h"
 #include "core.h"
 
-static DECLARE_RWSEM(cxl_dpa_rwsem);
+DECLARE_RWSEM(cxl_dpa_rwsem);
 
 /**
  * DOC: cxl core hdm
@@ -308,6 +308,11 @@ int cxl_dpa_free(struct cxl_endpoint_decoder *cxled)
 		rc = 0;
 		goto out;
 	}
+	if (cxled->cxld.region) {
+		dev_dbg(dev, "decoder assigned to: %s\n",
+			dev_name(&cxled->cxld.region->dev));
+		goto out;
+	}
 	if (cxled->cxld.flags & CXL_DECODER_F_ENABLE) {
 		dev_dbg(dev, "decoder enabled\n");
 		goto out;
@@ -378,6 +383,12 @@ int cxl_dpa_alloc(struct cxl_endpoint_decoder *cxled, unsigned long long size)
 	int rc = -EBUSY;
 
 	down_write(&cxl_dpa_rwsem);
+	if (cxled->cxld.region) {
+		dev_dbg(dev, "decoder attached to %s\n",
+			dev_name(&cxled->cxld.region->dev));
+		goto out;
+	}
+
 	if (cxled->cxld.flags & CXL_DECODER_F_ENABLE) {
 		dev_dbg(dev, "decoder enabled\n");
 		goto out;
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index c9207ebc3f32..562a6453249b 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -288,6 +288,7 @@ static struct attribute *cxl_decoder_base_attrs[] = {
 	&dev_attr_locked.attr,
 	&dev_attr_interleave_granularity.attr,
 	&dev_attr_interleave_ways.attr,
+	CXL_REGION_ATTR(region),
 	NULL,
 };
 
@@ -1483,8 +1484,10 @@ static struct cxl_decoder *cxl_decoder_alloc(struct cxl_port *port,
 
 		alloc = kzalloc(sizeof(*cxled), GFP_KERNEL);
 		cxled = alloc;
-		if (cxled)
+		if (cxled) {
 			cxld = &cxled->cxld;
+			cxled->pos = -1;
+		}
 	}
 	if (!alloc)
 		return ERR_PTR(-ENOMEM);
@@ -1690,6 +1693,13 @@ EXPORT_SYMBOL_NS_GPL(cxl_decoder_add, CXL);
 
 static void cxld_unregister(void *dev)
 {
+	struct cxl_endpoint_decoder *cxled;
+
+	if (is_endpoint_decoder(dev)) {
+		cxled = to_cxl_endpoint_decoder(dev);
+		cxl_decoder_kill_region(cxled);
+	}
+
 	device_unregister(dev);
 }
 
diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
index a604c24ff918..4830365f3857 100644
--- a/drivers/cxl/core/region.c
+++ b/drivers/cxl/core/region.c
@@ -24,6 +24,7 @@
  * but is only visible for persistent regions.
  * 1. Interleave granularity
  * 2. Interleave size
+ * 3. Decoder targets
  */
 
 /*
@@ -138,6 +139,8 @@ static ssize_t interleave_ways_show(struct device *dev,
 	return rc;
 }
 
+static const struct attribute_group *get_cxl_region_target_group(void);
+
 static ssize_t interleave_ways_store(struct device *dev,
 				     struct device_attribute *attr,
 				     const char *buf, size_t len)
@@ -146,7 +149,7 @@ static ssize_t interleave_ways_store(struct device *dev,
 	struct cxl_decoder *cxld = &cxlrd->cxlsd.cxld;
 	struct cxl_region *cxlr = to_cxl_region(dev);
 	struct cxl_region_params *p = &cxlr->params;
-	int rc, val;
+	int rc, val, save;
 	u8 iw;
 
 	rc = kstrtoint(buf, 0, &val);
@@ -175,9 +178,13 @@ static ssize_t interleave_ways_store(struct device *dev,
 		goto out;
 	}
 
+	save = p->interleave_ways;
 	p->interleave_ways = val;
+	rc = sysfs_update_group(&cxlr->dev.kobj, get_cxl_region_target_group());
+	if (rc)
+		p->interleave_ways = save;
 out:
-	up_read(&cxl_region_rwsem);
+	up_write(&cxl_region_rwsem);
 	if (rc)
 		return rc;
 	return len;
@@ -234,7 +241,7 @@ static ssize_t interleave_granularity_store(struct device *dev,
 
 	p->interleave_granularity = val;
 out:
-	up_read(&cxl_region_rwsem);
+	up_write(&cxl_region_rwsem);
 	if (rc)
 		return rc;
 	return len;
@@ -393,9 +400,262 @@ static const struct attribute_group cxl_region_group = {
 	.is_visible = cxl_region_visible,
 };
 
+static size_t show_targetN(struct cxl_region *cxlr, char *buf, int pos)
+{
+	struct cxl_region_params *p = &cxlr->params;
+	struct cxl_endpoint_decoder *cxled;
+	int rc;
+
+	rc = down_read_interruptible(&cxl_region_rwsem);
+	if (rc)
+		return rc;
+
+	if (pos >= p->interleave_ways) {
+		dev_dbg(&cxlr->dev, "position %d out of range %d\n", pos,
+			p->interleave_ways);
+		rc = -ENXIO;
+		goto out;
+	}
+
+	cxled = p->targets[pos];
+	if (!cxled)
+		rc = sysfs_emit(buf, "\n");
+	else
+		rc = sysfs_emit(buf, "%s\n", dev_name(&cxled->cxld.dev));
+out:
+	up_read(&cxl_region_rwsem);
+
+	return rc;
+}
+
+/*
+ * - Check that the given endpoint is attached to a host-bridge identified
+ *   in the root interleave.
+ */
+static int cxl_region_attach(struct cxl_region *cxlr,
+			     struct cxl_endpoint_decoder *cxled, int pos)
+{
+	struct cxl_region_params *p = &cxlr->params;
+
+	if (cxled->mode == CXL_DECODER_DEAD) {
+		dev_dbg(&cxlr->dev, "%s dead\n", dev_name(&cxled->cxld.dev));
+		return -ENODEV;
+	}
+
+	if (pos >= p->interleave_ways) {
+		dev_dbg(&cxlr->dev, "position %d out of range %d\n", pos,
+			p->interleave_ways);
+		return -ENXIO;
+	}
+
+	if (p->targets[pos] == cxled)
+		return 0;
+
+	if (p->targets[pos]) {
+		struct cxl_endpoint_decoder *cxled_target = p->targets[pos];
+		struct cxl_memdev *cxlmd_target = cxled_to_memdev(cxled_target);
+
+		dev_dbg(&cxlr->dev, "position %d already assigned to %s:%s\n",
+			pos, dev_name(&cxlmd_target->dev),
+			dev_name(&cxled_target->cxld.dev));
+		return -EBUSY;
+	}
+
+	p->targets[pos] = cxled;
+	cxled->pos = pos;
+	p->nr_targets++;
+
+	return 0;
+}
+
+static void cxl_region_detach(struct cxl_endpoint_decoder *cxled)
+{
+	struct cxl_region *cxlr = cxled->cxld.region;
+	struct cxl_region_params *p;
+
+	lockdep_assert_held_write(&cxl_region_rwsem);
+
+	if (!cxlr)
+		return;
+
+	p = &cxlr->params;
+	get_device(&cxlr->dev);
+
+	if (cxled->pos < 0 || cxled->pos >= p->interleave_ways ||
+	    p->targets[cxled->pos] != cxled) {
+		struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
+
+		dev_WARN_ONCE(&cxlr->dev, 1, "expected %s:%s at position %d\n",
+			      dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev),
+			      cxled->pos);
+		goto out;
+	}
+
+	p->targets[cxled->pos] = NULL;
+	p->nr_targets--;
+
+	/* notify the region driver that one of its targets has deparated */
+	up_write(&cxl_region_rwsem);
+	device_release_driver(&cxlr->dev);
+	down_write(&cxl_region_rwsem);
+out:
+	put_device(&cxlr->dev);
+}
+
+void cxl_decoder_kill_region(struct cxl_endpoint_decoder *cxled)
+{
+	down_write(&cxl_region_rwsem);
+	cxled->mode = CXL_DECODER_DEAD;
+	cxl_region_detach(cxled);
+	up_write(&cxl_region_rwsem);
+}
+
+static int attach_target(struct cxl_region *cxlr, const char *decoder, int pos)
+{
+	struct device *dev;
+	int rc;
+
+	dev = bus_find_device_by_name(&cxl_bus_type, NULL, decoder);
+	if (!dev)
+		return -ENODEV;
+
+	if (!is_endpoint_decoder(dev)) {
+		put_device(dev);
+		return -EINVAL;
+	}
+
+	rc = down_write_killable(&cxl_region_rwsem);
+	if (rc)
+		goto out;
+	down_read(&cxl_dpa_rwsem);
+	rc = cxl_region_attach(cxlr, to_cxl_endpoint_decoder(dev), pos);
+	up_read(&cxl_dpa_rwsem);
+	up_write(&cxl_region_rwsem);
+out:
+	put_device(dev);
+	return rc;
+}
+
+static int detach_target(struct cxl_region *cxlr, int pos)
+{
+	struct cxl_region_params *p = &cxlr->params;
+	int rc;
+
+	rc = down_write_killable(&cxl_region_rwsem);
+	if (rc)
+		return rc;
+
+	if (pos >= p->interleave_ways) {
+		dev_dbg(&cxlr->dev, "position %d out of range %d\n", pos,
+			p->interleave_ways);
+		rc = -ENXIO;
+		goto out;
+	}
+
+	if (!p->targets[pos]) {
+		rc = 0;
+		goto out;
+	}
+
+	cxl_region_detach(p->targets[pos]);
+	rc = 0;
+out:
+	up_write(&cxl_region_rwsem);
+	return rc;
+}
+
+static size_t store_targetN(struct cxl_region *cxlr, const char *buf, int pos,
+			    size_t len)
+{
+	int rc;
+
+	if (sysfs_streq(buf, "\n"))
+		rc = detach_target(cxlr, pos);
+	else
+		rc = attach_target(cxlr, buf, pos);
+
+	if (rc < 0)
+		return rc;
+	return len;
+}
+
+#define TARGET_ATTR_RW(n)                                              \
+static ssize_t target##n##_show(                                       \
+	struct device *dev, struct device_attribute *attr, char *buf)  \
+{                                                                      \
+	return show_targetN(to_cxl_region(dev), buf, (n));             \
+}                                                                      \
+static ssize_t target##n##_store(struct device *dev,                   \
+				 struct device_attribute *attr,        \
+				 const char *buf, size_t len)          \
+{                                                                      \
+	return store_targetN(to_cxl_region(dev), buf, (n), len);       \
+}                                                                      \
+static DEVICE_ATTR_RW(target##n)
+
+TARGET_ATTR_RW(0);
+TARGET_ATTR_RW(1);
+TARGET_ATTR_RW(2);
+TARGET_ATTR_RW(3);
+TARGET_ATTR_RW(4);
+TARGET_ATTR_RW(5);
+TARGET_ATTR_RW(6);
+TARGET_ATTR_RW(7);
+TARGET_ATTR_RW(8);
+TARGET_ATTR_RW(9);
+TARGET_ATTR_RW(10);
+TARGET_ATTR_RW(11);
+TARGET_ATTR_RW(12);
+TARGET_ATTR_RW(13);
+TARGET_ATTR_RW(14);
+TARGET_ATTR_RW(15);
+
+static struct attribute *target_attrs[] = {
+	&dev_attr_target0.attr,
+	&dev_attr_target1.attr,
+	&dev_attr_target2.attr,
+	&dev_attr_target3.attr,
+	&dev_attr_target4.attr,
+	&dev_attr_target5.attr,
+	&dev_attr_target6.attr,
+	&dev_attr_target7.attr,
+	&dev_attr_target8.attr,
+	&dev_attr_target9.attr,
+	&dev_attr_target10.attr,
+	&dev_attr_target11.attr,
+	&dev_attr_target12.attr,
+	&dev_attr_target13.attr,
+	&dev_attr_target14.attr,
+	&dev_attr_target15.attr,
+	NULL,
+};
+
+static umode_t cxl_region_target_visible(struct kobject *kobj,
+					 struct attribute *a, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct cxl_region *cxlr = to_cxl_region(dev);
+	struct cxl_region_params *p = &cxlr->params;
+
+	if (n < p->interleave_ways)
+		return a->mode;
+	return 0;
+}
+
+static const struct attribute_group cxl_region_target_group = {
+	.attrs = target_attrs,
+	.is_visible = cxl_region_target_visible,
+};
+
+static const struct attribute_group *get_cxl_region_target_group(void)
+{
+	return &cxl_region_target_group;
+}
+
 static const struct attribute_group *region_groups[] = {
 	&cxl_base_attribute_group,
 	&cxl_region_group,
+	&cxl_region_target_group,
 	NULL,
 };
 
@@ -554,6 +814,26 @@ static ssize_t create_pmem_region_store(struct device *dev,
 }
 DEVICE_ATTR_RW(create_pmem_region);
 
+static ssize_t region_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct cxl_decoder *cxld = to_cxl_decoder(dev);
+	ssize_t rc;
+
+	rc = down_read_interruptible(&cxl_region_rwsem);
+	if (rc)
+		return rc;
+
+	if (cxld->region)
+		rc = sysfs_emit(buf, "%s\n", dev_name(&cxld->region->dev));
+	else
+		rc = sysfs_emit(buf, "\n");
+	up_read(&cxl_region_rwsem);
+
+	return rc;
+}
+DEVICE_ATTR_RO(region);
+
 static struct cxl_region *cxl_find_region_by_name(struct cxl_decoder *cxld,
 						  const char *name)
 {
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 25960c1e4ebd..9340deccad4f 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -255,6 +255,7 @@ enum cxl_decoder_type {
  * @interleave_ways: number of cxl_dports in this decode
  * @interleave_granularity: data stride per dport
  * @target_type: accelerator vs expander (type2 vs type3) selector
+ * @region: currently assigned region for this decoder
  * @flags: memory type capabilities and locking
 */
 struct cxl_decoder {
@@ -264,14 +265,20 @@ struct cxl_decoder {
 	int interleave_ways;
 	int interleave_granularity;
 	enum cxl_decoder_type target_type;
+	struct cxl_region *region;
 	unsigned long flags;
 };
 
+/*
+ * CXL_DECODER_DEAD prevents endpoints from being reattached to regions
+ * while cxld_unregister() is running
+ */
 enum cxl_decoder_mode {
 	CXL_DECODER_NONE,
 	CXL_DECODER_RAM,
 	CXL_DECODER_PMEM,
 	CXL_DECODER_MIXED,
+	CXL_DECODER_DEAD,
 };
 
 /**
@@ -280,12 +287,14 @@ enum cxl_decoder_mode {
  * @dpa_res: actively claimed DPA span of this decoder
  * @skip: offset into @dpa_res where @cxld.hpa_range maps
  * @mode: which memory type / access-mode-partition this decoder targets
+ * @pos: interleave position in @cxld.region
  */
 struct cxl_endpoint_decoder {
 	struct cxl_decoder cxld;
 	struct resource *dpa_res;
 	resource_size_t skip;
 	enum cxl_decoder_mode mode;
+	int pos;
 };
 
 /**
@@ -344,6 +353,8 @@ struct cxl_region_params {
 	int interleave_ways;
 	int interleave_granularity;
 	struct resource *res;
+	struct cxl_endpoint_decoder *targets[CXL_DECODER_MAX_INTERLEAVE];
+	int nr_targets;
 };
 
 /**
-- 
2.36.1


  parent reply	other threads:[~2022-06-24  4:20 UTC|newest]

Thread overview: 157+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-24  2:45 [PATCH 00/46] CXL PMEM Region Provisioning Dan Williams
2022-06-24  2:45 ` [PATCH 01/46] tools/testing/cxl: Fix cxl_hdm_decode_init() calling convention Dan Williams
2022-06-28 10:37   ` Jonathan Cameron
     [not found]   ` <CGME20220629174147uscas1p211384ae262e099484440ef285be26c75@uscas1p2.samsung.com>
2022-06-29 17:41     ` Adam Manzanares
2022-07-09 20:06       ` Dan Williams
2022-07-12 22:11         ` Adam Manzanares
2022-06-24  2:45 ` [PATCH 02/46] cxl/port: Keep port->uport valid for the entire life of a port Dan Williams
2022-06-24  3:37   ` Alison Schofield
2022-06-28 11:47   ` Jonathan Cameron
2022-06-28 14:27     ` Dan Williams
     [not found]   ` <CGME20220629174622uscas1p2236a084ce25771a3ab57c6f006632f35@uscas1p2.samsung.com>
2022-06-29 17:46     ` Adam Manzanares
2022-06-24  2:45 ` [PATCH 03/46] cxl/hdm: Use local hdm variable Dan Williams
2022-06-24  3:38   ` Alison Schofield
2022-06-28 15:16   ` Jonathan Cameron
     [not found]   ` <CGME20220629200312uscas1p292303b9325dcbfe59293f002dc9e6b03@uscas1p2.samsung.com>
2022-06-29 20:03     ` Adam Manzanares
2022-06-24  2:45 ` [PATCH 04/46] cxl/core: Rename ->decoder_range ->hpa_range Dan Williams
2022-06-24  3:39   ` Alison Schofield
2022-06-28 15:17   ` Jonathan Cameron
     [not found]   ` <CGME20220629200652uscas1p2c1da644ea63a5de69e14e046379779b1@uscas1p2.samsung.com>
2022-06-29 20:06     ` Adam Manzanares
2022-06-24  2:45 ` [PATCH 05/46] cxl/core: Drop ->platform_res attribute for root decoders Dan Williams
2022-06-28 15:24   ` Jonathan Cameron
2022-07-09 23:33     ` Dan Williams
     [not found]   ` <CGME20220629202117uscas1p2892fb68ae60c4754e2f7d26882a92ae5@uscas1p2.samsung.com>
2022-06-29 20:21     ` Adam Manzanares
2022-07-09 23:38       ` Dan Williams
2022-06-24  2:45 ` [PATCH 06/46] cxl/core: Drop is_cxl_decoder() Dan Williams
2022-06-24  3:48   ` Alison Schofield
2022-06-28 15:25   ` Jonathan Cameron
     [not found]   ` <CGME20220629203448uscas1p264a7f79a1ed7f9257eefcb3064c7d943@uscas1p2.samsung.com>
2022-06-29 20:34     ` Adam Manzanares
2022-06-24  2:45 ` [PATCH 07/46] cxl: Introduce cxl_to_{ways,granularity} Dan Williams
2022-06-28 15:36   ` Jonathan Cameron
2022-07-09 23:52     ` Dan Williams
2022-06-24  2:45 ` [PATCH 08/46] cxl/core: Define a 'struct cxl_switch_decoder' Dan Williams
2022-06-28 16:12   ` Jonathan Cameron
2022-06-30 10:56     ` Jonathan Cameron
2022-07-10  0:49       ` Dan Williams
2022-07-10  0:33     ` Dan Williams
2022-06-24  2:46 ` [PATCH 09/46] cxl/acpi: Track CXL resources in iomem_resource Dan Williams
2022-06-28 16:43   ` Jonathan Cameron
2022-07-10  2:12     ` Dan Williams
2022-07-19 14:24       ` Jonathan Cameron
2022-06-24  2:46 ` [PATCH 10/46] cxl/core: Define a 'struct cxl_root_decoder' for tracking CXL window resources Dan Williams
2022-06-28 16:49   ` Jonathan Cameron
2022-07-10  2:20     ` Dan Williams
2022-06-28 16:53   ` Jonathan Cameron
2022-06-24  2:46 ` [PATCH 11/46] cxl/core: Define a 'struct cxl_endpoint_decoder' for tracking DPA resources Dan Williams
2022-06-28 16:55   ` Jonathan Cameron
2022-07-10  2:40     ` Dan Williams
2022-06-24  2:46 ` [PATCH 12/46] cxl/mem: Convert partition-info to resources Dan Williams
2022-06-28 17:02   ` Jonathan Cameron
2022-06-24  2:46 ` [PATCH 13/46] cxl/hdm: Require all decoders to be enumerated Dan Williams
2022-06-28 17:04   ` Jonathan Cameron
2022-06-24  2:46 ` [PATCH 14/46] cxl/hdm: Enumerate allocated DPA Dan Williams
2022-06-29 14:43   ` Jonathan Cameron
2022-07-10  3:03     ` Dan Williams
2022-07-19 14:25       ` Jonathan Cameron
2022-06-24  2:46 ` [PATCH 15/46] cxl/Documentation: List attribute permissions Dan Williams
2022-06-28  3:16   ` Alison Schofield
2022-06-29 14:59   ` Jonathan Cameron
2022-06-24  2:46 ` [PATCH 16/46] cxl/hdm: Add 'mode' attribute to decoder objects Dan Williams
2022-06-29 15:28   ` Jonathan Cameron
2022-07-10  3:45     ` Dan Williams
2022-06-24  2:47 ` [PATCH 17/46] cxl/hdm: Track next decoder to allocate Dan Williams
2022-06-29 15:31   ` Jonathan Cameron
2022-07-10  3:55     ` Dan Williams
2022-07-19 14:27       ` Jonathan Cameron
2022-07-10 16:34     ` Dan Williams
2022-06-24  2:47 ` [PATCH 18/46] cxl/hdm: Add support for allocating DPA to an endpoint decoder Dan Williams
2022-06-29 15:56   ` Jonathan Cameron
2022-07-10 16:53     ` Dan Williams
2022-06-24  2:47 ` [PATCH 19/46] cxl/debug: Move debugfs init to cxl_core_init() Dan Williams
2022-06-29 15:58   ` Jonathan Cameron
2022-06-24  2:47 ` [PATCH 20/46] cxl/mem: Add a debugfs version of 'iomem' for DPA, 'dpamem' Dan Williams
2022-06-29 16:08   ` Jonathan Cameron
2022-07-10 17:09     ` Dan Williams
2022-06-24  2:47 ` [PATCH 21/46] tools/testing/cxl: Move cxl_test resources to the top of memory Dan Williams
2022-06-29 16:11   ` Jonathan Cameron
2022-07-10 17:19     ` Dan Williams
2022-06-24  2:47 ` [PATCH 22/46] tools/testing/cxl: Expand CFMWS windows Dan Williams
2022-06-29 16:14   ` Jonathan Cameron
2022-06-24  2:47 ` [PATCH 23/46] tools/testing/cxl: Add partition support Dan Williams
2022-06-29 16:20   ` Jonathan Cameron
2022-06-24  2:48 ` [PATCH 24/46] tools/testing/cxl: Fix decoder default state Dan Williams
2022-06-29 16:22   ` Jonathan Cameron
2022-07-10 17:33     ` Dan Williams
2022-06-24  2:48 ` [PATCH 25/46] cxl/port: Record dport in endpoint references Dan Williams
2022-06-29 16:49   ` Jonathan Cameron
2022-07-10 18:40     ` Dan Williams
2022-06-24  4:19 ` [PATCH 26/46] cxl/port: Record parent dport when adding ports Dan Williams
2022-06-29 17:02   ` Jonathan Cameron
2022-06-24  4:19 ` [PATCH 27/46] cxl/port: Move 'cxl_ep' references to an xarray per port Dan Williams
2022-06-29 17:19   ` Jonathan Cameron
2022-06-24  4:19 ` [PATCH 28/46] cxl/port: Move dport tracking to an xarray Dan Williams
2022-06-30  9:18   ` Jonathan Cameron
2022-07-10 19:06     ` Dan Williams
2022-06-24  4:19 ` [PATCH 29/46] cxl/port: Cache CXL host bridge data Dan Williams
2022-06-30  9:21   ` Jonathan Cameron
2022-07-10 19:09     ` Dan Williams
2022-06-24  4:19 ` [PATCH 30/46] cxl/hdm: Add sysfs attributes for interleave ways + granularity Dan Williams
2022-06-30  9:26   ` Jonathan Cameron
2022-07-10 20:40     ` Dan Williams
2022-07-19 14:32       ` Jonathan Cameron
2022-06-24  4:19 ` [PATCH 31/46] cxl/hdm: Initialize decoder type for memory expander devices Dan Williams
2022-06-30  9:33   ` Jonathan Cameron
2022-06-24  4:19 ` [PATCH 32/46] cxl/mem: Enumerate port targets before adding endpoints Dan Williams
2022-06-30  9:48   ` Jonathan Cameron
2022-07-10 21:01     ` Dan Williams
2022-06-24  4:19 ` [PATCH 33/46] resource: Introduce alloc_free_mem_region() Dan Williams
2022-06-30 10:35   ` Jonathan Cameron
2022-07-10 21:58     ` Dan Williams
2022-06-24  4:19 ` [PATCH 34/46] cxl/region: Add region creation support Dan Williams
2022-06-30 13:17   ` Jonathan Cameron
2022-07-11  0:08     ` Dan Williams
2022-07-19 14:42       ` Jonathan Cameron
2022-06-24  4:19 ` [PATCH 35/46] cxl/region: Add a 'uuid' attribute Dan Williams
2022-06-28 10:29   ` Jonathan Cameron
2022-06-28 14:24     ` Dan Williams
2022-06-24  4:19 ` [PATCH 36/46] cxl/region: Add interleave ways attribute Dan Williams
2022-06-30 13:44   ` Jonathan Cameron
2022-07-11  0:32     ` Dan Williams
2022-07-19 14:47       ` Jonathan Cameron
2022-07-19 22:15         ` Dan Williams
2022-07-20  9:59           ` Jonathan Cameron
2022-06-30 13:45   ` Jonathan Cameron
2022-06-24  4:19 ` [PATCH 37/46] cxl/region: Allocate host physical address (HPA) capacity to new regions Dan Williams
2022-06-30 13:56   ` Jonathan Cameron
2022-07-11  0:47     ` Dan Williams
2022-06-24  4:19 ` Dan Williams [this message]
2022-06-30 14:31   ` [PATCH 38/46] cxl/region: Enable the assignment of endpoint decoders to regions Jonathan Cameron
2022-07-11  1:12     ` Dan Williams
2022-06-24  4:19 ` [PATCH 39/46] cxl/acpi: Add a host-bridge index lookup mechanism Dan Williams
2022-06-30 15:48   ` Jonathan Cameron
2022-06-24  4:19 ` [PATCH 40/46] cxl/region: Attach endpoint decoders Dan Williams
2022-06-24 18:25   ` Jonathan Cameron
2022-06-24 18:49     ` Dan Williams
2022-06-24 20:51     ` Dan Williams
2022-06-24 23:21       ` Dan Williams
2022-06-30 16:34   ` Jonathan Cameron
2022-07-11  2:02     ` Dan Williams
2022-06-24  4:19 ` [PATCH 41/46] cxl/region: Program target lists Dan Williams
2022-06-24  4:19 ` [PATCH 42/46] cxl/hdm: Commit decoder state to hardware Dan Williams
2022-06-30 17:05   ` Jonathan Cameron
2022-07-11  3:02     ` Dan Williams
2022-06-24  4:19 ` [PATCH 43/46] cxl/region: Add region driver boiler plate Dan Williams
2022-06-30 17:09   ` Jonathan Cameron
2022-06-24  4:19 ` [PATCH 44/46] cxl/pmem: Delete unused nvdimm attribute Dan Williams
2022-06-30 17:10   ` Jonathan Cameron
2022-06-24  4:19 ` [PATCH 45/46] cxl/pmem: Fix offline_nvdimm_bus() to offline by bridge Dan Williams
2022-06-30 17:14   ` Jonathan Cameron
2022-07-11 19:49     ` Dan Williams
2022-06-24  4:19 ` [PATCH 46/46] cxl/region: Introduce cxl_pmem_region objects Dan Williams
2022-06-30 17:34   ` Jonathan Cameron
2022-07-11 20:05     ` Dan Williams
2022-06-24 15:13 ` [PATCH 00/46] CXL PMEM Region Provisioning Jonathan Cameron
2022-06-24 15:32   ` Dan Williams
2022-06-28  3:12 ` Alison Schofield
2022-06-28  3:34   ` Dan Williams
2022-07-02  2:26 ` Alison Schofield

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220624041950.559155-13-dan.j.williams@intel.com \
    --to=dan.j.williams@intel.com \
    --cc=bwidawsk@kernel.org \
    --cc=hch@lst.de \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=nvdimm@lists.linux.dev \
    --cc=patches@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).