Linux-Renesas-SoC Archive on lore.kernel.org
 help / color / Atom feed
From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Benoit Parrot <bparrot@ti.com>,
	linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: [PATCH v2 00/30] v4l: add support for multiplexed streams
Date: Fri,  2 Nov 2018 00:31:14 +0100
Message-ID: <20181101233144.31507-1-niklas.soderlund+renesas@ragnatech.se> (raw)

Hi all,

This series adds support for multiplexed streams within a media device
link. The use-case addressed in this series covers CSI-2 Virtual
Channels on the Renesas R-Car Gen3 platforms. The v4l2 changes have been
a joint effort between Sakari and Laurent and floating around for some
time [1].

I have added driver support for the devices used on the Renesas Gen3
platforms, a ADV7482 connected to the R-Car CSI-2 receiver. With these
changes I can control which of the analog inputs of the ADV7482 the
video source is captured from and on which CSI-2 virtual channel the
video is transmitted on to the R-Car CSI-2 receiver.

The series adds two new subdev IOCTLs [GS]_ROUTING which allows
user-space to get and set routes inside a subdevice. I have added RFC
support for these to v4l-utils [2] which can be used to test this
series, example:

    Check the internal routing of the adv748x csi-2 transmitter:
    v4l2-ctl -d /dev/v4l-subdev24 --get-routing
    0/0 -> 1/0 [ENABLED]
    0/0 -> 1/1 []
    0/0 -> 1/2 []
    0/0 -> 1/3 []


    Select that video should be outputed on VC 2 and check the result:
    $ v4l2-ctl -d /dev/v4l-subdev24 --set-routing '0/0 -> 1/2 [1]'

    $ v4l2-ctl -d /dev/v4l-subdev24 --get-routing
    0/0 -> 1/0 []
    0/0 -> 1/1 []
    0/0 -> 1/2 [ENABLED]
    0/0 -> 1/3 []

This series is tested on R-Car M3-N and for your testing needs this
series is available at

    git://git.ragnatech.se/linux v4l2/mux

* Changes since v1
- Rebased on latest media-tree.
- Incorporated changes to patch 'v4l: subdev: compat: Implement handling 
  for VIDIOC_SUBDEV_[GS]_ROUTING' by Sakari.
- Added review tags.

Thanks.

1. git://linuxtv.org/sailus/media_tree.git vc
2. git://git.ragnatech.se/v4l-utils routing

Laurent Pinchart (4):
  media: entity: Add has_route entity operation
  media: entity: Add media_has_route() function
  media: entity: Use routing information during graph traversal
  v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations

Niklas Söderlund (7):
  adv748x: csi2: add translation from pixelcode to CSI-2 datatype
  adv748x: csi2: only allow formats on sink pads
  adv748x: csi2: describe the multiplexed stream
  adv748x: csi2: add internal routing configuration
  adv748x: afe: add routing support
  rcar-csi2: use frame description information to configure CSI-2 bus
  rcar-csi2: expose the subdevice internal routing

Sakari Ailus (19):
  media: entity: Use pad as a starting point for graph walk
  media: entity: Use pads instead of entities in the media graph walk
    stack
  media: entity: Walk the graph based on pads
  v4l: mc: Start walk from a specific pad in use count calculation
  media: entity: Move the pipeline from entity to pads
  media: entity: Use pad as the starting point for a pipeline
  media: entity: Swap pads if route is checked from source to sink
  media: entity: Skip link validation for pads to which there is no
    route to
  media: entity: Add an iterator helper for connected pads
  media: entity: Add only connected pads to the pipeline
  media: entity: Add debug information in graph walk route check
  media: entity: Look for indirect routes
  v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING
  v4l: subdev: Take routing information into account in link validation
  v4l: subdev: Improve link format validation debug messages
  v4l: mc: Add an S_ROUTING helper function for power state changes
  v4l: Add bus type to frame descriptors
  v4l: Add CSI-2 bus configuration to frame descriptors
  v4l: Add stream to frame descriptor

 Documentation/media/kapi/mc-core.rst          |  15 +-
 drivers/media/i2c/adv748x/adv748x-afe.c       |  65 ++++
 drivers/media/i2c/adv748x/adv748x-csi2.c      | 124 +++++++-
 drivers/media/i2c/adv748x/adv748x.h           |   1 +
 drivers/media/media-entity.c                  | 252 ++++++++++------
 drivers/media/pci/intel/ipu3/ipu3-cio2.c      |   6 +-
 .../media/platform/exynos4-is/fimc-capture.c  |   8 +-
 .../platform/exynos4-is/fimc-isp-video.c      |   8 +-
 drivers/media/platform/exynos4-is/fimc-isp.c  |   2 +-
 drivers/media/platform/exynos4-is/fimc-lite.c |  10 +-
 drivers/media/platform/exynos4-is/media-dev.c |  20 +-
 drivers/media/platform/omap3isp/isp.c         |   2 +-
 drivers/media/platform/omap3isp/ispvideo.c    |  25 +-
 drivers/media/platform/omap3isp/ispvideo.h    |   2 +-
 .../media/platform/qcom/camss/camss-video.c   |   6 +-
 drivers/media/platform/rcar-vin/rcar-csi2.c   | 188 +++++++++---
 drivers/media/platform/rcar-vin/rcar-dma.c    |   8 +-
 .../media/platform/s3c-camif/camif-capture.c  |   6 +-
 drivers/media/platform/vimc/vimc-capture.c    |   6 +-
 drivers/media/platform/vsp1/vsp1_video.c      |  18 +-
 drivers/media/platform/xilinx/xilinx-dma.c    |  20 +-
 drivers/media/platform/xilinx/xilinx-dma.h    |   2 +-
 drivers/media/usb/au0828/au0828-core.c        |   4 +-
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |  77 +++++
 drivers/media/v4l2-core/v4l2-ioctl.c          |  20 +-
 drivers/media/v4l2-core/v4l2-mc.c             |  76 +++--
 drivers/media/v4l2-core/v4l2-subdev.c         | 285 ++++++++++++++++--
 .../staging/media/davinci_vpfe/vpfe_video.c   |  47 +--
 drivers/staging/media/imx/imx-media-utils.c   |   8 +-
 drivers/staging/media/omap4iss/iss.c          |   2 +-
 drivers/staging/media/omap4iss/iss_video.c    |  38 +--
 drivers/staging/media/omap4iss/iss_video.h    |   2 +-
 include/media/media-entity.h                  | 122 +++++---
 include/media/v4l2-mc.h                       |  22 ++
 include/media/v4l2-subdev.h                   |  34 +++
 include/uapi/linux/v4l2-subdev.h              |  40 +++
 36 files changed, 1241 insertions(+), 330 deletions(-)

-- 
2.19.1

             reply index

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-01 23:31 Niklas Söderlund [this message]
2018-11-01 23:31 ` [PATCH v2 01/30] media: entity: Use pad as a starting point for graph walk Niklas Söderlund
2019-01-15 21:43   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 02/30] media: entity: Use pads instead of entities in the media graph walk stack Niklas Söderlund
2019-01-15 22:03   ` Laurent Pinchart
2019-01-15 22:13     ` Sakari Ailus
2019-01-15 22:07   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 03/30] media: entity: Walk the graph based on pads Niklas Söderlund
2019-01-15 22:21   ` Laurent Pinchart
     [not found]     ` <20190115223406.mxgzl36cp54gb7nv@kekkonen.localdomain>
2019-01-15 23:28       ` Laurent Pinchart
2019-01-22 14:50         ` Sakari Ailus
2019-02-14 15:15   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 04/30] v4l: mc: Start walk from a specific pad in use count calculation Niklas Söderlund
2019-01-15 22:24   ` Laurent Pinchart
2019-01-15 22:36     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 05/30] media: entity: Move the pipeline from entity to pads Niklas Söderlund
2019-01-15 22:38   ` Laurent Pinchart
2019-01-15 22:48     ` Sakari Ailus
2019-02-14 15:53   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 06/30] media: entity: Use pad as the starting point for a pipeline Niklas Söderlund
2019-01-15 22:54   ` Laurent Pinchart
2019-01-22 15:31     ` Sakari Ailus
2019-01-22 15:37       ` Laurent Pinchart
2019-01-22 16:16         ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 07/30] media: entity: Add has_route entity operation Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 08/30] media: entity: Add media_has_route() function Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 09/30] media: entity: Swap pads if route is checked from source to sink Niklas Söderlund
2019-01-15 22:57   ` Laurent Pinchart
2019-01-22 15:15     ` Sakari Ailus
2019-01-22 15:20       ` Laurent Pinchart
2019-02-18  9:21         ` Jacopo Mondi
2019-02-22 12:18           ` Laurent Pinchart
2019-03-04 12:35             ` Jacopo Mondi
2019-03-05 20:04               ` Laurent Pinchart
2019-03-06  8:29                 ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 10/30] media: entity: Use routing information during graph traversal Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 11/30] media: entity: Skip link validation for pads to which there is no route to Niklas Söderlund
2019-01-15 23:13   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 12/30] media: entity: Add an iterator helper for connected pads Niklas Söderlund
2019-01-15 23:24   ` Laurent Pinchart
2019-01-22 15:36     ` Sakari Ailus
2019-01-22 15:38       ` Laurent Pinchart
2019-01-22 16:21         ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 13/30] media: entity: Add only connected pads to the pipeline Niklas Söderlund
2019-01-15 23:33   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 14/30] media: entity: Add debug information in graph walk route check Niklas Söderlund
2019-01-15 23:35   ` Laurent Pinchart
2019-01-22 15:38     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 15/30] media: entity: Look for indirect routes Niklas Söderlund
2019-01-15 23:41   ` Laurent Pinchart
2019-01-22 15:56     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 16/30] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations Niklas Söderlund
2019-01-15 23:51   ` Laurent Pinchart
2019-01-22 16:14     ` Sakari Ailus
2019-01-22 17:00       ` Laurent Pinchart
2019-02-21 14:59     ` Jacopo Mondi
2019-02-21 23:49       ` Sakari Ailus
2019-02-22  8:46         ` Jacopo Mondi
2019-02-21 14:39   ` Jacopo Mondi
2019-02-21 22:31     ` Sakari Ailus
2019-02-22  8:40       ` Jacopo Mondi
2019-02-22 11:04         ` Sakari Ailus
2019-02-22 11:17           ` Jacopo Mondi
2019-02-22 11:29             ` Sakari Ailus
2019-02-22 13:37               ` Ian Arkver
2019-02-22 13:50               ` Geert Uytterhoeven
2018-11-01 23:31 ` [PATCH v2 17/30] v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING Niklas Söderlund
2019-01-08 10:04   ` Geert Uytterhoeven
2019-01-15 23:53   ` Laurent Pinchart
2019-01-22 15:57     ` Sakari Ailus
2019-02-18 11:21     ` Jacopo Mondi
2019-02-21 23:50       ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 18/30] v4l: subdev: Take routing information into account in link validation Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 19/30] v4l: subdev: Improve link format validation debug messages Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 20/30] v4l: mc: Add an S_ROUTING helper function for power state changes Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 21/30] v4l: Add bus type to frame descriptors Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 22/30] v4l: Add CSI-2 bus configuration " Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 23/30] v4l: Add stream to frame descriptor Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 24/30] adv748x: csi2: add translation from pixelcode to CSI-2 datatype Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 25/30] adv748x: csi2: only allow formats on sink pads Niklas Söderlund
2019-02-21 14:18   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 26/30] adv748x: csi2: describe the multiplexed stream Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 27/30] adv748x: csi2: add internal routing configuration Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 28/30] adv748x: afe: add routing support Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 29/30] rcar-csi2: use frame description information to configure CSI-2 bus Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 30/30] rcar-csi2: expose the subdevice internal routing Niklas Söderlund
2018-11-14 13:10   ` Nikita Yushchenko
2018-11-14 19:45     ` Niklas Söderlund
2018-12-03 22:16 ` [PATCH v2 00/30] v4l: add support for multiplexed streams Sakari Ailus
2018-12-05 22:09   ` Niklas Söderlund

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181101233144.31507-1-niklas.soderlund+renesas@ragnatech.se \
    --to=niklas.soderlund+renesas@ragnatech.se \
    --cc=bparrot@ti.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Renesas-SoC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-renesas-soc/0 linux-renesas-soc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-renesas-soc linux-renesas-soc/ https://lore.kernel.org/linux-renesas-soc \
		linux-renesas-soc@vger.kernel.org linux-renesas-soc@archiver.kernel.org
	public-inbox-index linux-renesas-soc


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-renesas-soc


AGPL code for this site: git clone https://public-inbox.org/ public-inbox