linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Benoit Parrot <bparrot@ti.com>,
	linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Subject: [PATCH v2 01/30] media: entity: Use pad as a starting point for graph walk
Date: Fri,  2 Nov 2018 00:31:15 +0100	[thread overview]
Message-ID: <20181101233144.31507-2-niklas.soderlund+renesas@ragnatech.se> (raw)
In-Reply-To: <20181101233144.31507-1-niklas.soderlund+renesas@ragnatech.se>

From: Sakari Ailus <sakari.ailus@linux.intel.com>

With the upcoming use of the recently added has_route() media entity op, all
the pads in an entity will no longer be considered interconnected. This has
an effect where the media graph is traversed: the starting pad does make a
difference.

Prepare for this change by using pad instead of the entity as an argument
for the graph walk operations. The actual graph traversal algorithm change
is in further patches.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 Documentation/media/kapi/mc-core.rst            |  2 +-
 drivers/media/media-entity.c                    | 17 ++++++++---------
 drivers/media/platform/exynos4-is/media-dev.c   |  4 ++--
 drivers/media/platform/omap3isp/ispvideo.c      |  2 +-
 drivers/media/platform/vsp1/vsp1_video.c        |  2 +-
 drivers/media/platform/xilinx/xilinx-dma.c      |  2 +-
 drivers/media/v4l2-core/v4l2-mc.c               |  6 +++---
 drivers/staging/media/davinci_vpfe/vpfe_video.c |  6 +++---
 drivers/staging/media/omap4iss/iss_video.c      |  4 ++--
 include/media/media-entity.h                    | 10 ++++------
 10 files changed, 26 insertions(+), 29 deletions(-)

diff --git a/Documentation/media/kapi/mc-core.rst b/Documentation/media/kapi/mc-core.rst
index 0c05503eaf1fa6c7..27aefb9a778b2ad6 100644
--- a/Documentation/media/kapi/mc-core.rst
+++ b/Documentation/media/kapi/mc-core.rst
@@ -165,7 +165,7 @@ Drivers initiate a graph traversal by calling
 :c:func:`media_graph_walk_start()`
 
 The graph structure, provided by the caller, is initialized to start graph
-traversal at the given entity.
+traversal at the given pad in an entity.
 
 Drivers can then retrieve the next entity by calling
 :c:func:`media_graph_walk_next()`
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 0b1cb3559140a1fe..2bbc07de71aa5e6d 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -300,17 +300,16 @@ void media_graph_walk_cleanup(struct media_graph *graph)
 }
 EXPORT_SYMBOL_GPL(media_graph_walk_cleanup);
 
-void media_graph_walk_start(struct media_graph *graph,
-			    struct media_entity *entity)
+void media_graph_walk_start(struct media_graph *graph, struct media_pad *pad)
 {
 	media_entity_enum_zero(&graph->ent_enum);
-	media_entity_enum_set(&graph->ent_enum, entity);
+	media_entity_enum_set(&graph->ent_enum, pad->entity);
 
 	graph->top = 0;
 	graph->stack[graph->top].entity = NULL;
-	stack_push(graph, entity);
-	dev_dbg(entity->graph_obj.mdev->dev,
-		"begin graph walk at '%s'\n", entity->name);
+	stack_push(graph, pad->entity);
+	dev_dbg(pad->graph_obj.mdev->dev,
+		"begin graph walk at '%s':%u\n", pad->entity->name, pad->index);
 }
 EXPORT_SYMBOL_GPL(media_graph_walk_start);
 
@@ -428,7 +427,7 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
 			goto error_graph_walk_start;
 	}
 
-	media_graph_walk_start(&pipe->graph, entity);
+	media_graph_walk_start(&pipe->graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(graph))) {
 		DECLARE_BITMAP(active, MEDIA_ENTITY_MAX_PADS);
@@ -509,7 +508,7 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
 	 * Link validation on graph failed. We revert what we did and
 	 * return the error.
 	 */
-	media_graph_walk_start(graph, entity_err);
+	media_graph_walk_start(graph, entity_err->pads);
 
 	while ((entity_err = media_graph_walk_next(graph))) {
 		/* Sanity check for negative stream_count */
@@ -560,7 +559,7 @@ void __media_pipeline_stop(struct media_entity *entity)
 	if (WARN_ON(!pipe))
 		return;
 
-	media_graph_walk_start(graph, entity);
+	media_graph_walk_start(graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(graph))) {
 		/* Sanity check for negative stream_count */
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 870501b0f351addb..51d2a571c06db6a3 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -1144,7 +1144,7 @@ static int __fimc_md_modify_pipelines(struct media_entity *entity, bool enable,
 	 * through active links. This is needed as we cannot power on/off the
 	 * subdevs in random order.
 	 */
-	media_graph_walk_start(graph, entity);
+	media_graph_walk_start(graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(graph))) {
 		if (!is_media_entity_v4l2_video_device(entity))
@@ -1159,7 +1159,7 @@ static int __fimc_md_modify_pipelines(struct media_entity *entity, bool enable,
 	return 0;
 
 err:
-	media_graph_walk_start(graph, entity_err);
+	media_graph_walk_start(graph, entity_err->pads);
 
 	while ((entity_err = media_graph_walk_next(graph))) {
 		if (!is_media_entity_v4l2_video_device(entity_err))
diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c
index 5658f6a326f77f66..50ad35bc644eae29 100644
--- a/drivers/media/platform/omap3isp/ispvideo.c
+++ b/drivers/media/platform/omap3isp/ispvideo.c
@@ -238,7 +238,7 @@ static int isp_video_get_graph_data(struct isp_video *video,
 		return ret;
 	}
 
-	media_graph_walk_start(&graph, entity);
+	media_graph_walk_start(&graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(&graph))) {
 		struct isp_video *__video;
diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c
index 771dfe1f7c20e526..e35b2e2340b82f00 100644
--- a/drivers/media/platform/vsp1/vsp1_video.c
+++ b/drivers/media/platform/vsp1/vsp1_video.c
@@ -580,7 +580,7 @@ static int vsp1_video_pipeline_build(struct vsp1_pipeline *pipe,
 	if (ret)
 		return ret;
 
-	media_graph_walk_start(&graph, entity);
+	media_graph_walk_start(&graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(&graph))) {
 		struct v4l2_subdev *subdev;
diff --git a/drivers/media/platform/xilinx/xilinx-dma.c b/drivers/media/platform/xilinx/xilinx-dma.c
index 4ae9d38c94332fa4..566c2d0fb97dc162 100644
--- a/drivers/media/platform/xilinx/xilinx-dma.c
+++ b/drivers/media/platform/xilinx/xilinx-dma.c
@@ -193,7 +193,7 @@ static int xvip_pipeline_validate(struct xvip_pipeline *pipe,
 		return ret;
 	}
 
-	media_graph_walk_start(&graph, entity);
+	media_graph_walk_start(&graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(&graph))) {
 		struct xvip_dma *dma;
diff --git a/drivers/media/v4l2-core/v4l2-mc.c b/drivers/media/v4l2-core/v4l2-mc.c
index 014a2a97cadd8706..9ed480fe5b6e4762 100644
--- a/drivers/media/v4l2-core/v4l2-mc.c
+++ b/drivers/media/v4l2-core/v4l2-mc.c
@@ -341,7 +341,7 @@ static int pipeline_pm_use_count(struct media_entity *entity,
 {
 	int use = 0;
 
-	media_graph_walk_start(graph, entity);
+	media_graph_walk_start(graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(graph))) {
 		if (is_media_entity_v4l2_video_device(entity))
@@ -404,7 +404,7 @@ static int pipeline_pm_power(struct media_entity *entity, int change,
 	if (!change)
 		return 0;
 
-	media_graph_walk_start(graph, entity);
+	media_graph_walk_start(graph, entity->pads);
 
 	while (!ret && (entity = media_graph_walk_next(graph)))
 		if (is_media_entity_v4l2_subdev(entity))
@@ -413,7 +413,7 @@ static int pipeline_pm_power(struct media_entity *entity, int change,
 	if (!ret)
 		return ret;
 
-	media_graph_walk_start(graph, first);
+	media_graph_walk_start(graph, first->pads);
 
 	while ((first = media_graph_walk_next(graph))
 	       && first != entity)
diff --git a/drivers/staging/media/davinci_vpfe/vpfe_video.c b/drivers/staging/media/davinci_vpfe/vpfe_video.c
index 5e42490331b7620f..912d93fc7a483cd4 100644
--- a/drivers/staging/media/davinci_vpfe/vpfe_video.c
+++ b/drivers/staging/media/davinci_vpfe/vpfe_video.c
@@ -150,7 +150,7 @@ static int vpfe_prepare_pipeline(struct vpfe_video_device *video)
 		mutex_unlock(&mdev->graph_mutex);
 		return -ENOMEM;
 	}
-	media_graph_walk_start(&graph, entity);
+	media_graph_walk_start(&graph, entity->pads);
 	while ((entity = media_graph_walk_next(&graph))) {
 		if (entity == &video->video_dev.entity)
 			continue;
@@ -303,7 +303,7 @@ static int vpfe_pipeline_enable(struct vpfe_pipeline *pipe)
 	ret = media_graph_walk_init(&pipe->graph, mdev);
 	if (ret)
 		goto out;
-	media_graph_walk_start(&pipe->graph, entity);
+	media_graph_walk_start(&pipe->graph, entity->pads);
 	while ((entity = media_graph_walk_next(&pipe->graph))) {
 
 		if (!is_media_entity_v4l2_subdev(entity))
@@ -345,7 +345,7 @@ static int vpfe_pipeline_disable(struct vpfe_pipeline *pipe)
 
 	mdev = entity->graph_obj.mdev;
 	mutex_lock(&mdev->graph_mutex);
-	media_graph_walk_start(&pipe->graph, entity);
+	media_graph_walk_start(&pipe->graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(&pipe->graph))) {
 
diff --git a/drivers/staging/media/omap4iss/iss_video.c b/drivers/staging/media/omap4iss/iss_video.c
index c1322aeaf01eb951..6f72c02c8054f496 100644
--- a/drivers/staging/media/omap4iss/iss_video.c
+++ b/drivers/staging/media/omap4iss/iss_video.c
@@ -217,7 +217,7 @@ iss_video_far_end(struct iss_video *video)
 		return NULL;
 	}
 
-	media_graph_walk_start(&graph, entity);
+	media_graph_walk_start(&graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(&graph))) {
 		if (entity == &video->video.entity)
@@ -897,7 +897,7 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	if (ret < 0)
 		goto err_media_pipeline_start;
 
-	media_graph_walk_start(&graph, entity);
+	media_graph_walk_start(&graph, entity->pads);
 	while ((entity = media_graph_walk_next(&graph)))
 		media_entity_enum_set(&pipe->ent_enum, entity);
 
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index e5f6960d92f6cdd4..07ab141e739ef5ff 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -928,22 +928,20 @@ void media_graph_walk_cleanup(struct media_graph *graph);
 void media_entity_put(struct media_entity *entity);
 
 /**
- * media_graph_walk_start - Start walking the media graph at a
- *	given entity
+ * media_graph_walk_start - Start walking the media graph at a given pad
  *
  * @graph: Media graph structure that will be used to walk the graph
- * @entity: Starting entity
+ * @pad: Starting pad
  *
  * Before using this function, media_graph_walk_init() must be
  * used to allocate resources used for walking the graph. This
  * function initializes the graph traversal structure to walk the
- * entities graph starting at the given entity. The traversal
+ * entities graph starting at the given pad. The traversal
  * structure must not be modified by the caller during graph
  * traversal. After the graph walk, the resources must be released
  * using media_graph_walk_cleanup().
  */
-void media_graph_walk_start(struct media_graph *graph,
-			    struct media_entity *entity);
+void media_graph_walk_start(struct media_graph *graph, struct media_pad *pad);
 
 /**
  * media_graph_walk_next - Get the next entity in the graph
-- 
2.19.1

  reply	other threads:[~2018-11-02  8:37 UTC|newest]

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-01 23:31 [PATCH v2 00/30] v4l: add support for multiplexed streams Niklas Söderlund
2018-11-01 23:31 ` Niklas Söderlund [this message]
2019-01-15 21:43   ` [PATCH v2 01/30] media: entity: Use pad as a starting point for graph walk Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 02/30] media: entity: Use pads instead of entities in the media graph walk stack Niklas Söderlund
2019-01-15 22:03   ` Laurent Pinchart
2019-01-15 22:13     ` Sakari Ailus
2019-01-15 22:07   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 03/30] media: entity: Walk the graph based on pads Niklas Söderlund
2019-01-15 22:21   ` Laurent Pinchart
     [not found]     ` <20190115223406.mxgzl36cp54gb7nv@kekkonen.localdomain>
2019-01-15 23:28       ` Laurent Pinchart
2019-01-22 14:50         ` Sakari Ailus
2019-02-14 15:15   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 04/30] v4l: mc: Start walk from a specific pad in use count calculation Niklas Söderlund
2019-01-15 22:24   ` Laurent Pinchart
2019-01-15 22:36     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 05/30] media: entity: Move the pipeline from entity to pads Niklas Söderlund
2019-01-15 22:38   ` Laurent Pinchart
2019-01-15 22:48     ` Sakari Ailus
2019-02-14 15:53   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 06/30] media: entity: Use pad as the starting point for a pipeline Niklas Söderlund
2019-01-15 22:54   ` Laurent Pinchart
2019-01-22 15:31     ` Sakari Ailus
2019-01-22 15:37       ` Laurent Pinchart
2019-01-22 16:16         ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 07/30] media: entity: Add has_route entity operation Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 08/30] media: entity: Add media_has_route() function Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 09/30] media: entity: Swap pads if route is checked from source to sink Niklas Söderlund
2019-01-15 22:57   ` Laurent Pinchart
2019-01-22 15:15     ` Sakari Ailus
2019-01-22 15:20       ` Laurent Pinchart
2019-02-18  9:21         ` Jacopo Mondi
2019-02-22 12:18           ` Laurent Pinchart
2019-03-04 12:35             ` Jacopo Mondi
2019-03-05 20:04               ` Laurent Pinchart
2019-03-06  8:29                 ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 10/30] media: entity: Use routing information during graph traversal Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 11/30] media: entity: Skip link validation for pads to which there is no route to Niklas Söderlund
2019-01-15 23:13   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 12/30] media: entity: Add an iterator helper for connected pads Niklas Söderlund
2019-01-15 23:24   ` Laurent Pinchart
2019-01-22 15:36     ` Sakari Ailus
2019-01-22 15:38       ` Laurent Pinchart
2019-01-22 16:21         ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 13/30] media: entity: Add only connected pads to the pipeline Niklas Söderlund
2019-01-15 23:33   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 14/30] media: entity: Add debug information in graph walk route check Niklas Söderlund
2019-01-15 23:35   ` Laurent Pinchart
2019-01-22 15:38     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 15/30] media: entity: Look for indirect routes Niklas Söderlund
2019-01-15 23:41   ` Laurent Pinchart
2019-01-22 15:56     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 16/30] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations Niklas Söderlund
2019-01-15 23:51   ` Laurent Pinchart
2019-01-22 16:14     ` Sakari Ailus
2019-01-22 17:00       ` Laurent Pinchart
2019-02-21 14:59     ` Jacopo Mondi
2019-02-21 23:49       ` Sakari Ailus
2019-02-22  8:46         ` Jacopo Mondi
2019-02-21 14:39   ` Jacopo Mondi
2019-02-21 22:31     ` Sakari Ailus
2019-02-22  8:40       ` Jacopo Mondi
2019-02-22 11:04         ` Sakari Ailus
2019-02-22 11:17           ` Jacopo Mondi
2019-02-22 11:29             ` Sakari Ailus
2019-02-22 13:37               ` Ian Arkver
2019-02-22 13:50               ` Geert Uytterhoeven
2018-11-01 23:31 ` [PATCH v2 17/30] v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING Niklas Söderlund
2019-01-08 10:04   ` Geert Uytterhoeven
2019-01-15 23:53   ` Laurent Pinchart
2019-01-22 15:57     ` Sakari Ailus
2019-02-18 11:21     ` Jacopo Mondi
2019-02-21 23:50       ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 18/30] v4l: subdev: Take routing information into account in link validation Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 19/30] v4l: subdev: Improve link format validation debug messages Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 20/30] v4l: mc: Add an S_ROUTING helper function for power state changes Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 21/30] v4l: Add bus type to frame descriptors Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 22/30] v4l: Add CSI-2 bus configuration " Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 23/30] v4l: Add stream to frame descriptor Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 24/30] adv748x: csi2: add translation from pixelcode to CSI-2 datatype Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 25/30] adv748x: csi2: only allow formats on sink pads Niklas Söderlund
2019-02-21 14:18   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 26/30] adv748x: csi2: describe the multiplexed stream Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 27/30] adv748x: csi2: add internal routing configuration Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 28/30] adv748x: afe: add routing support Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 29/30] rcar-csi2: use frame description information to configure CSI-2 bus Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 30/30] rcar-csi2: expose the subdevice internal routing Niklas Söderlund
2018-11-14 13:10   ` Nikita Yushchenko
2018-11-14 19:45     ` Niklas Söderlund
2018-12-03 22:16 ` [PATCH v2 00/30] v4l: add support for multiplexed streams Sakari Ailus
2018-12-05 22:09   ` Niklas Söderlund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181101233144.31507-2-niklas.soderlund+renesas@ragnatech.se \
    --to=niklas.soderlund+renesas@ragnatech.se \
    --cc=bparrot@ti.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).