From: Biju Das <biju.das.jz@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH v2 11/11] arm64: dts: renesas: r9a07g044: Add I2C nodes
Date: Thu, 24 Jun 2021 14:02:39 +0100 [thread overview]
Message-ID: <20210624130240.17468-12-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20210624130240.17468-1-biju.das.jz@bp.renesas.com>
Add I2C{0,1,2,3} nodes to RZ/G2L (R9A07G044) SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2:
* Updated reset entries.
---
arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 80 ++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 01482d227506..63d9696bc769 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -89,6 +89,86 @@
status = "disabled";
};
+ i2c0: i2c@10058000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058000 0 0x400>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C0_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@10058400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058400 0 0x400>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C1_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@10058800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058800 0 0x400>;
+ interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C2_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@10058c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058c00 0 0x400>;
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C3_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
cpg: clock-controller@11010000 {
compatible = "renesas,r9a07g044-cpg";
reg = <0 0x11010000 0 0x10000>;
--
2.17.1
next prev parent reply other threads:[~2021-06-24 13:03 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-24 13:02 [PATCH v2 00/11] Update clock definitions Biju Das
2021-06-24 13:02 ` [PATCH v2 01/11] drivers: clk: renesas: renesas-rzg2l-cpg: Add multi clock PM support Biju Das
2021-06-24 13:02 ` [PATCH v2 02/11] drivers: clk: renesas: r9a07g044-cpg: Rename divider table Biju Das
2021-06-25 14:27 ` Geert Uytterhoeven
2021-06-25 14:52 ` Biju Das
2021-06-24 13:02 ` [PATCH v2 03/11] drivers: clk: renesas: r9a07g044-cpg: Fix P1 Clock Biju Das
2021-06-25 14:32 ` Geert Uytterhoeven
2021-06-24 13:02 ` [PATCH v2 04/11] drivers: clk: renesas: r9a07g044-cpg: Add P2 Clock support Biju Das
2021-06-25 14:33 ` Geert Uytterhoeven
2021-06-24 13:02 ` [PATCH v2 05/11] dt-bindings: clk: r9a07g044-cpg: Update clock/reset definitions Biju Das
2021-06-25 14:33 ` Geert Uytterhoeven
2021-06-24 13:02 ` [PATCH v2 06/11] drivers: clk: renesas: renesas-rzg2l-cpg: Separate reset from module clocks Biju Das
2021-06-25 14:42 ` Geert Uytterhoeven
2021-06-25 14:50 ` Biju Das
2021-06-24 13:02 ` [PATCH v2 07/11] drivers: clk: renesas: r9a07g044-cpg: Update {GIC,IA55,SCIF} clock/reset entries Biju Das
2021-06-25 15:05 ` Geert Uytterhoeven
2021-06-25 16:08 ` Biju Das
2021-06-25 17:42 ` Geert Uytterhoeven
2021-06-25 18:32 ` Biju Das
2021-06-24 13:02 ` [PATCH v2 08/11] arm64: dts: renesas: r9a07g044: Update SCIF0 clock/reset Biju Das
2021-06-25 15:05 ` Geert Uytterhoeven
2021-06-24 13:02 ` [PATCH v2 09/11] drivers: clk: renesas: r9a07g044-cpg: Add I2C clocks/resets Biju Das
2021-06-25 15:06 ` Geert Uytterhoeven
2021-06-24 13:02 ` [PATCH v2 10/11] drivers: clk: renesas: r9a07g044-cpg: Add DMAC clocks/resets Biju Das
2021-06-25 15:12 ` Geert Uytterhoeven
2021-06-24 13:02 ` Biju Das [this message]
2021-06-25 15:16 ` [PATCH v2 11/11] arm64: dts: renesas: r9a07g044: Add I2C nodes Geert Uytterhoeven
2021-06-25 17:01 ` Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210624130240.17468-12-biju.das.jz@bp.renesas.com \
--to=biju.das.jz@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).