From: Biju Das <biju.das.jz@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH v4 10/10] arm64: dts: renesas: r9a07g044: Add I2C nodes
Date: Sat, 26 Jun 2021 09:13:44 +0100 [thread overview]
Message-ID: <20210626081344.5783-11-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20210626081344.5783-1-biju.das.jz@bp.renesas.com>
Add I2C{0,1,2,3} nodes to RZ/G2L (R9A07G044) SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v3->v4:
* No change.
v2->v3:
* Added Geert's Rb tab
* Fixes extra space in interrupt property
v1->v2:
* Updated reset entries.
---
arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 80 ++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 01482d227506..9a7489dc70d1 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -89,6 +89,86 @@
status = "disabled";
};
+ i2c0: i2c@10058000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058000 0 0x400>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C0_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@10058400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058400 0 0x400>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C1_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@10058800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058800 0 0x400>;
+ interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C2_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@10058c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058c00 0 0x400>;
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C3_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
cpg: clock-controller@11010000 {
compatible = "renesas,r9a07g044-cpg";
reg = <0 0x11010000 0 0x10000>;
--
2.17.1
next prev parent reply other threads:[~2021-06-26 8:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-26 8:13 [PATCH v4 00/10] Update clock definitions Biju Das
2021-06-26 8:13 ` [PATCH v4 01/10] drivers: clk: renesas: renesas-rzg2l-cpg: Add multi clock PM support Biju Das
2021-06-26 8:13 ` [PATCH v4 02/10] drivers: clk: renesas: r9a07g044-cpg: Rename divider table Biju Das
2021-06-26 8:13 ` [PATCH v4 03/10] drivers: clk: renesas: r9a07g044-cpg: Fix P1 Clock Biju Das
2021-06-26 8:13 ` [PATCH v4 04/10] drivers: clk: renesas: r9a07g044-cpg: Add P2 Clock support Biju Das
2021-06-26 8:13 ` [PATCH v4 05/10] dt-bindings: clk: r9a07g044-cpg: Update clock/reset definitions Biju Das
2021-07-14 2:42 ` Rob Herring
2021-07-14 8:11 ` Geert Uytterhoeven
2021-06-26 8:13 ` [PATCH v4 06/10] drivers: clk: renesas: r9a07g044-cpg: Update {GIC,IA55,SCIF} clock/reset entries Biju Das
2021-06-28 12:00 ` Geert Uytterhoeven
2021-06-26 8:13 ` [PATCH v4 07/10] arm64: dts: renesas: r9a07g044: Update SCIF0 clock/reset Biju Das
2021-06-26 8:13 ` [PATCH v4 08/10] drivers: clk: renesas: r9a07g044-cpg: Add I2C clocks/resets Biju Das
2021-06-26 8:13 ` [PATCH v4 09/10] drivers: clk: renesas: r9a07g044-cpg: Add DMAC clocks/resets Biju Das
2021-06-26 8:13 ` Biju Das [this message]
2021-06-28 12:18 ` [PATCH v4 00/10] Update clock definitions Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210626081344.5783-11-biju.das.jz@bp.renesas.com \
--to=biju.das.jz@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).