[PATCH v2 0/4] dt-bindings: phy: add r8a77961 support

[PATCH v2 0/4] dt-bindings: phy: add r8a77961 support

[Yoshihiro Shimoda]

This patch adds USBPHY 2.0/3.0 devices support for r8a77961
(R-Car M3-W+).

Changes from v1:
 - Rebase these patches on top of my patches of convert bindings to
   json-schema.
 - Add Reviewed-by.
 https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261195

Yoshihiro Shimoda (4):
  dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
  dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
  dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
  dt-bindings: phy: renesas: usb3-phy: add r8a77961 support

 .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |  70 --------------
 .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt |  52 -----------
 .../devicetree/bindings/phy/renesas,usb2-phy.yaml  | 104 +++++++++++++++++++++
 .../devicetree/bindings/phy/renesas,usb3-phy.yaml  |  79 ++++++++++++++++
 4 files changed, 183 insertions(+), 122 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
 delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
 create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml

-- 
2.7.4

[PATCH v2 1/4] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema

[Yoshihiro Shimoda]

Convert Renesas R-Car generation 3 USB 2.0 PHY bindings documentation
to json-schema.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |  70 --------------
 .../devicetree/bindings/phy/renesas,usb2-phy.yaml  | 103 +++++++++++++++++++++
 2 files changed, 103 insertions(+), 70 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
 create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
deleted file mode 100644
index 7734b21..00000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Renesas R-Car generation 3 USB 2.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3, RZ/G1C, RZ/G2 and RZ/A2 USB 2.0 PHY contain.
-
-Required properties:
-- compatible: "renesas,usb2-phy-r7s9210" if the device is a part of an R7S9210
-	      SoC.
-	      "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470
-	      SoC.
-	      "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
-	      SoC.
-	      "renesas,usb2-phy-r8a774b1" if the device is a part of an R8A774B1
-	      SoC.
-	      "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
-	      SoC.
-	      "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
-	      SoC.
-	      "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
-	      SoC.
-	      "renesas,usb2-phy-r8a77965" if the device is a part of an
-	      R8A77965 SoC.
-	      "renesas,usb2-phy-r8a77990" if the device is a part of an
-	      R8A77990 SoC.
-	      "renesas,usb2-phy-r8a77995" if the device is a part of an
-	      R8A77995 SoC.
-	      "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3, RZ/G2 or
-	      RZ/A2 compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the partial USB 2.0 Host register block.
-- clocks: clock phandle and specifier pair(s).
-- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and
-	      using <0> is deprecated).
-
-The phandle's argument in the PHY specifier is the INT_STATUS bit of controller:
-- 1 = USBH_INTA (OHCI)
-- 2 = USBH_INTB (EHCI)
-- 3 = UCOM_INT (OTG and BC)
-
-Optional properties:
-To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
-combined, the device tree node should set interrupt properties to use the
-channel as USB OTG:
-- interrupts: interrupt specifier for the PHY.
-- vbus-supply: Phandle to a regulator that provides power to the VBUS. This
-	       regulator will be managed during the PHY power on/off sequence.
-- renesas,no-otg-pins: boolean, specify when a board does not provide proper
-		       otg pins.
-- dr_mode: string, indicates the working mode for the PHY. Can be "host",
-           "peripheral", or "otg". Should be set if otg controller is not used.
-
-
-Example (R-Car H3):
-
-	usb-phy@ee080200 {
-		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
-		reg = <0 0xee080200 0 0x700>;
-		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 703>;
-	};
-
-	usb-phy@ee0a0200 {
-		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
-		reg = <0 0xee0a0200 0 0x700>;
-		clocks = <&cpg CPG_MOD 702>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
new file mode 100644
index 00000000..c0e1af6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 2.0 PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,usb2-phy-r8a77470 # RZ/G1C
+
+      - items:
+          - enum:
+              - renesas,usb2-phy-r7s9210  # RZ/A2
+              - renesas,usb2-phy-r8a774a1 # RZ/G2M
+              - renesas,usb2-phy-r8a774b1 # RZ/G2N
+              - renesas,usb2-phy-r8a774c0 # RZ/G2E
+              - renesas,usb2-phy-r8a7795  # R-Car H3
+              - renesas,usb2-phy-r8a7796  # R-Car M3-W
+              - renesas,usb2-phy-r8a77965 # R-Car M3-N
+              - renesas,usb2-phy-r8a77990 # R-Car E3
+              - renesas,usb2-phy-r8a77995 # R-Car D3
+          - const: renesas,rcar-gen3-usb2-phy
+
+  reg:
+    # base address and length of the registers block for the PHY.
+    maxItems: 1
+
+  clocks:
+    # clock phandle and specifier pair(s).
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    # for RZ/A2
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: fck
+      - const: usb_x1
+
+  '#phy-cells':
+    enum: [0, 1]  # and 0 is deprecated.
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: reset of USB 2.0 host side
+      - description: reset of USB 2.0 peripheral side
+
+  vbus-supply:
+    description: |
+      Phandle to a regulator that provides power to the VBUS. This regulator
+      will be managed during the PHY power on/off sequence.
+
+  renesas,no-otg-pins:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      specify when a board does not provide proper otg pins.
+
+  dr_mode: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb-phy@ee080200 {
+        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
+        reg = <0 0xee080200 0 0x700>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 703>;
+        #phy-cells = <1>;
+    };
+
+    usb-phy@ee0a0200 {
+        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
+        reg = <0 0xee0a0200 0 0x700>;
+        clocks = <&cpg CPG_MOD 702>;
+        #phy-cells = <1>;
+    };
-- 
2.7.4

Re: [PATCH v2 1/4] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema

[Geert Uytterhoeven]

Hi Shimoda-san,

On Thu, Mar 26, 2020 at 6:30 AM Yoshihiro Shimoda
<yoshihiro.shimoda.uh@renesas.com> wrote:
> Convert Renesas R-Car generation 3 USB 2.0 PHY bindings documentation
> to json-schema.
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Thanks for your patch!

> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> @@ -0,0 +1,103 @@
> +# SPDX-License-Identifier: GPL-2.0-only

I think Rob would prefer to see

    # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> +  reg:
> +    # base address and length of the registers block for the PHY.

The comment is not needed.

> +    maxItems: 1
> +
> +  clocks:
> +    # clock phandle and specifier pair(s).

Likewise.

> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    # for RZ/A2

if:
  properties:
    compatible:
      items:
        enum:
          - renesas,usb2-phy-r7s9210

> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - const: fck
> +      - const: usb_x1

> +examples:
> +  - |
> +    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/r8a7795-sysc.h>
> +
> +    usb-phy@ee080200 {
> +        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
> +        reg = <0 0xee080200 0 0x700>;

Examples are built with #{address,size}-cells = <1>, so

    reg = <0xee080200 0x700>;

> +        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&cpg CPG_MOD 703>;
> +        #phy-cells = <1>;
> +    };
> +
> +    usb-phy@ee0a0200 {
> +        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
> +        reg = <0 0xee0a0200 0 0x700>;

reg = <0xee0a0200 0x700>;

> +        clocks = <&cpg CPG_MOD 702>;
> +        #phy-cells = <1>;
> +    };

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

RE: [PATCH v2 1/4] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema

[Yoshihiro Shimoda]

Hi Geert-san,

Thank you for your review!

> From: Geert Uytterhoeven, Sent: Thursday, March 26, 2020 6:00 PM
<snip>
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > @@ -0,0 +1,103 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> 
> I think Rob would prefer to see
> 
>     # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

I'll fix it.

> > +  reg:
> > +    # base address and length of the registers block for the PHY.
> 
> The comment is not needed.

OK. I'll remove it.

> > +    maxItems: 1
> > +
> > +  clocks:
> > +    # clock phandle and specifier pair(s).
> 
> Likewise.

I got it.

> > +    minItems: 1
> > +    maxItems: 2
> > +
> > +  clock-names:
> > +    # for RZ/A2
> 
> if:
>   properties:
>     compatible:
>       items:
>         enum:
>           - renesas,usb2-phy-r7s9210

Thank you for the proposal. I'll fix it.

> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      - const: fck
> > +      - const: usb_x1
> 
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/power/r8a7795-sysc.h>
> > +
> > +    usb-phy@ee080200 {
> > +        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
> > +        reg = <0 0xee080200 0 0x700>;
> 
> Examples are built with #{address,size}-cells = <1>, so
> 
>     reg = <0xee080200 0x700>;

I got it. I'll fix it.

> > +        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> > +        clocks = <&cpg CPG_MOD 703>;
> > +        #phy-cells = <1>;
> > +    };
> > +
> > +    usb-phy@ee0a0200 {
> > +        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
> > +        reg = <0 0xee0a0200 0 0x700>;
> 
> reg = <0xee0a0200 0x700>;

Yes, I'll fix it.

Best regards,
Yoshihiro Shimoda

[PATCH v2 2/4] dt-bindings: phy: renesas: usb2-phy: add r8a77961 support

[Yoshihiro Shimoda]

This patch adds support for r8a77961 (R-Car M3-W+).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
index c0e1af6..41eb766 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -23,6 +23,7 @@ properties:
               - renesas,usb2-phy-r8a774c0 # RZ/G2E
               - renesas,usb2-phy-r8a7795  # R-Car H3
               - renesas,usb2-phy-r8a7796  # R-Car M3-W
+              - renesas,usb2-phy-r8a77961 # R-Car M3-W+
               - renesas,usb2-phy-r8a77965 # R-Car M3-N
               - renesas,usb2-phy-r8a77990 # R-Car E3
               - renesas,usb2-phy-r8a77995 # R-Car D3
-- 
2.7.4

[PATCH v2 3/4] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema

[Yoshihiro Shimoda]

Convert Renesas R-Car generation 3 USB 3.0 PHY bindings documentation
to json-schema.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 52 ---------------
 .../devicetree/bindings/phy/renesas,usb3-phy.yaml  | 78 ++++++++++++++++++++++
 2 files changed, 78 insertions(+), 52 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
 create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
deleted file mode 100644
index 0fe433b..00000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Renesas R-Car generation 3 USB 3.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3 and RZ/G2 USB 3.0 PHY contain.
-If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
-instead of USB3_CLK. However, if you don't want to these features, you don't
-need this driver.
-
-Required properties:
-- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
-	      SoC.
-	      "renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1
-	      SoC.
-	      "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
-	      SoC.
-	      "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
-	      SoC.
-	      "renesas,r8a77965-usb3-phy" if the device is a part of an
-	      R8A77965 SoC.
-	      "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
-	      compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the USB 3.0 PHY register block.
-- clocks: A list of phandles and clock-specifier pairs.
-- clock-names: Name of the clocks.
-  - The funcional clock must be "usb3-if".
-  - The usb3's external clock must be "usb3s_clk".
-  - The usb2's external clock must be "usb_extal". If you want to use the ssc,
-    the clock-frequency must not be 0.
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
-
-Optional properties:
-- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using
-		     the following values as u32:
-			- 0 (or the property doesn't exist): disable the ssc
-			- 4980: enable the ssc as -4980 ppm
-			- 4492: enable the ssc as -4492 ppm
-			- 4003: enable the ssc as -4003 ppm
-
-Example (R-Car H3):
-
-	usb-phy@e65ee000 {
-		compatible = "renesas,r8a7795-usb3-phy",
-			     "renesas,rcar-gen3-usb3-phy";
-		reg = <0 0xe65ee000 0 0x90>;
-		clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
-		clock-names = "usb3-if", "usb3s_clk", "usb_extal";
-	};
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
new file mode 100644
index 00000000..dcd1cd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 3.0 PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-usb3-phy # RZ/G2M
+          - renesas,r8a774b1-usb3-phy # RZ/G2N
+          - renesas,r8a7795-usb3-phy  # R-Car H3
+          - renesas,r8a7796-usb3-phy  # R-Car M3-W
+          - renesas,r8a77965-usb3-phy # R-Car M3-N
+      - const: renesas,rcar-gen3-usb3-phy
+
+  reg:
+    # base address and length of the registers block for the PHY.
+    maxItems: 1
+
+  clocks:
+    # A list of phandles and clock-specifier pairs.
+    maxItems: 3
+
+  clock-names:
+    # If you want to use the ssc, the clock-frequency of usb_extal
+    # must not be 0.
+    maxItems: 3
+    items:
+      - const: usb3-if # The funcional clock
+      - const: usb3s_clk # The usb3's external clock
+      - const: usb_extal # The usb2's external clock
+
+  '#phy-cells':
+    # see phy-bindings.txt in the same directory
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,ssc-range:
+    description: |
+      Enable/disable spread spectrum clock (ssc). 0 or the property doesn't
+      exist means disabliing the ssc.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 0, 4003, 4492, 4980 ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb-phy@e65ee000 {
+        compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy";
+        reg = <0 0xe65ee000 0 0x90>;
+        clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
+        clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+        #phy-cells = <0>;
+    };
-- 
2.7.4

Re: [PATCH v2 3/4] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema

[Geert Uytterhoeven]

Hi Shimoda-san,

On Thu, Mar 26, 2020 at 6:29 AM Yoshihiro Shimoda
<yoshihiro.shimoda.uh@renesas.com> wrote:
> Convert Renesas R-Car generation 3 USB 3.0 PHY bindings documentation
> to json-schema.
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Thanks for your patch!

> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: GPL-2.0-only

In think Rob would prefer

    # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas R-Car generation 3 USB 3.0 PHY
> +
> +maintainers:
> +  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - renesas,r8a774a1-usb3-phy # RZ/G2M
> +          - renesas,r8a774b1-usb3-phy # RZ/G2N
> +          - renesas,r8a7795-usb3-phy  # R-Car H3
> +          - renesas,r8a7796-usb3-phy  # R-Car M3-W
> +          - renesas,r8a77965-usb3-phy # R-Car M3-N
> +      - const: renesas,rcar-gen3-usb3-phy
> +
> +  reg:
> +    # base address and length of the registers block for the PHY.

I think this comment can be removed.

> +    maxItems: 1
> +
> +  clocks:
> +    # A list of phandles and clock-specifier pairs.

Likewise.

"minItems: 2"?

> +    maxItems: 3
> +
> +  clock-names:
> +    # If you want to use the ssc, the clock-frequency of usb_extal
> +    # must not be 0.

"minItems: 2"?

> +    maxItems: 3
> +    items:
> +      - const: usb3-if # The funcional clock
> +      - const: usb3s_clk # The usb3's external clock
> +      - const: usb_extal # The usb2's external clock
> +
> +  '#phy-cells':
> +    # see phy-bindings.txt in the same directory
> +    const: 0
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  renesas,ssc-range:
> +    description: |
> +      Enable/disable spread spectrum clock (ssc). 0 or the property doesn't
> +      exist means disabliing the ssc.

disabling

The actual value will be -<value> ppm.

> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - enum: [ 0, 4003, 4492, 4980 ]
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - '#phy-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> +    #include <dt-bindings/power/r8a7795-sysc.h>
> +
> +    usb-phy@e65ee000 {
> +        compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy";
> +        reg = <0 0xe65ee000 0 0x90>;

Examples use the default #{address,size}-cells of <1>, so

    reg = <0xe65ee000 0x90>;

> +        clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
> +        clock-names = "usb3-if", "usb3s_clk", "usb_extal";
> +        #phy-cells = <0>;
> +    };

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

RE: [PATCH v2 3/4] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema

[Yoshihiro Shimoda]

Hi Geert-san,

Thank you for your review!
> From: Geert Uytterhoeven, Sent: Thursday, March 26, 2020 5:53 PM
<snip>
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
> > @@ -0,0 +1,78 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> 
> In think Rob would prefer
> 
>     # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

I got it.

> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas R-Car generation 3 USB 3.0 PHY
> > +
> > +maintainers:
> > +  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - renesas,r8a774a1-usb3-phy # RZ/G2M
> > +          - renesas,r8a774b1-usb3-phy # RZ/G2N
> > +          - renesas,r8a7795-usb3-phy  # R-Car H3
> > +          - renesas,r8a7796-usb3-phy  # R-Car M3-W
> > +          - renesas,r8a77965-usb3-phy # R-Car M3-N
> > +      - const: renesas,rcar-gen3-usb3-phy
> > +
> > +  reg:
> > +    # base address and length of the registers block for the PHY.
> 
> I think this comment can be removed.

I think so. So, I'll remove it.

> > +    maxItems: 1
> > +
> > +  clocks:
> > +    # A list of phandles and clock-specifier pairs.
> 
> Likewise.

Yes, I'll remove it.

> "minItems: 2"?

Thank you for pointed it out. Yes, this should have "minItems: 2".

> > +    maxItems: 3
> > +
> > +  clock-names:
> > +    # If you want to use the ssc, the clock-frequency of usb_extal
> > +    # must not be 0.
> 
> "minItems: 2"?

Yes, I'll add it.

> > +    maxItems: 3
> > +    items:
> > +      - const: usb3-if # The funcional clock
> > +      - const: usb3s_clk # The usb3's external clock
> > +      - const: usb_extal # The usb2's external clock
> > +
> > +  '#phy-cells':
> > +    # see phy-bindings.txt in the same directory
> > +    const: 0
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  renesas,ssc-range:
> > +    description: |
> > +      Enable/disable spread spectrum clock (ssc). 0 or the property doesn't
> > +      exist means disabliing the ssc.
> 
> disabling

Oops, I'll fix it.

> The actual value will be -<value> ppm.

Yes, that's right. So, I'll add this sentence.

> > +    allOf:
> > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > +      - enum: [ 0, 4003, 4492, 4980 ]
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - '#phy-cells'
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> > +    #include <dt-bindings/power/r8a7795-sysc.h>
> > +
> > +    usb-phy@e65ee000 {
> > +        compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy";
> > +        reg = <0 0xe65ee000 0 0x90>;
> 
> Examples use the default #{address,size}-cells of <1>, so
> 
>     reg = <0xe65ee000 0x90>;

Oh, I didn't know. I'll fix it.

Best regards,
Yoshihiro Shimoda

[PATCH v2 4/4] dt-bindings: phy: renesas: usb3-phy: add r8a77961 support

[Yoshihiro Shimoda]

This patch adds support for r8a77961 (R-Car M3-W+).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
index dcd1cd5..d5defac 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@@ -17,6 +17,7 @@ properties:
           - renesas,r8a774b1-usb3-phy # RZ/G2N
           - renesas,r8a7795-usb3-phy  # R-Car H3
           - renesas,r8a7796-usb3-phy  # R-Car M3-W
+          - renesas,r8a77961-usb3-phy # R-Car M3-W+
           - renesas,r8a77965-usb3-phy # R-Car M3-N
       - const: renesas,rcar-gen3-usb3-phy
 
-- 
2.7.4