Linux-Security-Module Archive on lore.kernel.org
 help / Atom feed
From: Alison Schofield <alison.schofield@intel.com>
To: dhowells@redhat.com, tglx@linutronix.de
Cc: jmorris@namei.org, mingo@redhat.com, hpa@zytor.com, bp@alien8.de,
	luto@kernel.org, peterz@infradead.org,
	kirill.shutemov@linux.intel.com, dave.hansen@intel.com,
	kai.huang@intel.com, jun.nakajima@intel.com,
	dan.j.williams@intel.com, jarkko.sakkinen@intel.com,
	keyrings@vger.kernel.org, linux-security-module@vger.kernel.org,
	linux-mm@kvack.org, x86@kernel.org
Subject: [RFC v2 05/13] x86/mm: Set KeyIDs in encrypted VMAs
Date: Mon,  3 Dec 2018 23:39:52 -0800
Message-ID: <f0ff967e2015a9dffceef22ac52ecd736a1ddb7e.1543903910.git.alison.schofield@intel.com> (raw)
In-Reply-To: <cover.1543903910.git.alison.schofield@intel.com>

MKTME architecture requires the KeyID to be placed in PTE bits 51:46.
To create an encrypted VMA, place the KeyID in the upper bits of
vm_page_prot that matches the position of those PTE bits.

When the VMA is assigned a KeyID it is always considered a KeyID
change. The VMA is either going from not encrypted to encrypted,
or from encrypted with any KeyID to encrypted with any other KeyID.
To make the change safely, remove the user pages held by the VMA
and unlink the VMA's anonymous chain.

Change-Id: I676056525c49c8803898315a10b196ef5a5c5415
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
---
 arch/x86/include/asm/mktme.h |  4 ++++
 arch/x86/mm/mktme.c          | 26 ++++++++++++++++++++++++++
 include/linux/mm.h           |  6 ++++++
 3 files changed, 36 insertions(+)

diff --git a/arch/x86/include/asm/mktme.h b/arch/x86/include/asm/mktme.h
index dbb49909d665..de3e529f3ab0 100644
--- a/arch/x86/include/asm/mktme.h
+++ b/arch/x86/include/asm/mktme.h
@@ -24,6 +24,10 @@ extern int mktme_map_keyid_from_key(void *key);
 extern void *mktme_map_key_from_keyid(int keyid);
 extern int mktme_map_get_free_keyid(void);
 
+/* Set the encryption keyid bits in a VMA */
+extern void mprotect_set_encrypt(struct vm_area_struct *vma, int newkeyid,
+				unsigned long start, unsigned long end);
+
 DECLARE_STATIC_KEY_FALSE(mktme_enabled_key);
 static inline bool mktme_enabled(void)
 {
diff --git a/arch/x86/mm/mktme.c b/arch/x86/mm/mktme.c
index 34224d4e3f45..e3fdf7b48173 100644
--- a/arch/x86/mm/mktme.c
+++ b/arch/x86/mm/mktme.c
@@ -1,5 +1,6 @@
 #include <linux/mm.h>
 #include <linux/highmem.h>
+#include <linux/rmap.h>
 #include <asm/mktme.h>
 #include <asm/set_memory.h>
 
@@ -131,6 +132,31 @@ int mktme_map_get_free_keyid(void)
 	return 0;
 }
 
+/* Set the encryption keyid bits in a VMA */
+void mprotect_set_encrypt(struct vm_area_struct *vma, int newkeyid,
+			  unsigned long start, unsigned long end)
+{
+	int oldkeyid = vma_keyid(vma);
+	pgprotval_t newprot;
+
+	/* Unmap pages with old KeyID if there's any. */
+	zap_page_range(vma, start, end - start);
+
+	if (oldkeyid == newkeyid)
+		return;
+
+	newprot = pgprot_val(vma->vm_page_prot);
+	newprot &= ~mktme_keyid_mask;
+	newprot |= (unsigned long)newkeyid << mktme_keyid_shift;
+	vma->vm_page_prot = __pgprot(newprot);
+
+	/*
+	 * The VMA doesn't have any inherited pages.
+	 * Start anon VMA tree from scratch.
+	 */
+	unlink_anon_vmas(vma);
+}
+
 /* Prepare page to be used for encryption. Called from page allocator. */
 void __prep_encrypted_page(struct page *page, int order, int keyid, bool zero)
 {
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 1309761bb6d0..e2d87e92ca74 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -2806,5 +2806,11 @@ void __init setup_nr_node_ids(void);
 static inline void setup_nr_node_ids(void) {}
 #endif
 
+#ifndef CONFIG_X86_INTEL_MKTME
+static inline void mprotect_set_encrypt(struct vm_area_struct *vma,
+					int newkeyid,
+					unsigned long start,
+					unsigned long end) {}
+#endif /* CONFIG_X86_INTEL_MKTME */
 #endif /* __KERNEL__ */
 #endif /* _LINUX_MM_H */
-- 
2.14.1


  parent reply index

Thread overview: 91+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-04  7:39 [RFC v2 00/13] Multi-Key Total Memory Encryption API (MKTME) Alison Schofield
2018-12-04  7:39 ` [RFC v2 01/13] x86/mktme: Document the MKTME APIs Alison Schofield
2018-12-05 18:11   ` Andy Lutomirski
2018-12-05 19:22     ` Alison Schofield
2018-12-05 23:35       ` Andy Lutomirski
2018-12-06  8:04   ` Sakkinen, Jarkko
2018-12-04  7:39 ` [RFC v2 02/13] mm: Generalize the mprotect implementation to support extensions Alison Schofield
2018-12-06  8:08   ` Sakkinen, Jarkko
2018-12-04  7:39 ` [RFC v2 03/13] syscall/x86: Wire up a new system call for memory encryption keys Alison Schofield
2018-12-04  7:39 ` [RFC v2 04/13] x86/mm: Add helper functions for MKTME " Alison Schofield
2018-12-04  9:14   ` Peter Zijlstra
2018-12-05  5:49     ` Alison Schofield
2018-12-04 15:35   ` Andy Lutomirski
2018-12-05  5:52     ` Alison Schofield
2018-12-06  8:31   ` Sakkinen, Jarkko
2018-12-04  7:39 ` Alison Schofield [this message]
2018-12-06  8:37   ` [RFC v2 05/13] x86/mm: Set KeyIDs in encrypted VMAs Sakkinen, Jarkko
2018-12-04  7:39 ` [RFC v2 06/13] mm: Add the encrypt_mprotect() system call Alison Schofield
2018-12-06  8:38   ` Sakkinen, Jarkko
2018-12-04  7:39 ` [RFC v2 07/13] x86/mm: Add helpers for reference counting encrypted VMAs Alison Schofield
2018-12-04  8:58   ` Peter Zijlstra
2018-12-05  5:28     ` Alison Schofield
2018-12-04  7:39 ` [RFC v2 08/13] mm: Use reference counting for " Alison Schofield
2018-12-04  7:39 ` [RFC v2 09/13] mm: Restrict memory encryption to anonymous VMA's Alison Schofield
2018-12-04  9:10   ` Peter Zijlstra
2018-12-05  5:30     ` Alison Schofield
2018-12-05  9:07       ` Peter Zijlstra
2018-12-04  7:39 ` [RFC v2 10/13] keys/mktme: Add the MKTME Key Service type for memory encryption Alison Schofield
2018-12-06  8:51   ` Sakkinen, Jarkko
2018-12-06  8:54     ` Sakkinen, Jarkko
2018-12-06 15:11     ` Dave Hansen
2018-12-06 22:56       ` Sakkinen, Jarkko
2018-12-04  7:39 ` [RFC v2 11/13] keys/mktme: Program memory encryption keys on a system wide basis Alison Schofield
2018-12-04  9:21   ` Peter Zijlstra
2018-12-04  9:50     ` Kirill A. Shutemov
2018-12-05  5:44       ` Alison Schofield
2018-12-05  5:43     ` Alison Schofield
2018-12-05  9:10       ` Peter Zijlstra
2018-12-05 17:26         ` Alison Schofield
2018-12-04  7:39 ` [RFC v2 12/13] keys/mktme: Save MKTME data if kernel cmdline parameter allows Alison Schofield
2018-12-04  9:22   ` Peter Zijlstra
2018-12-07  2:14   ` Huang, Kai
2018-12-07  3:42     ` Alison Schofield
2018-12-07  6:39     ` Jarkko Sakkinen
2018-12-07  6:45       ` Jarkko Sakkinen
2018-12-07 11:47     ` Kirill A. Shutemov
2018-12-04  7:40 ` [RFC v2 13/13] keys/mktme: Support CPU Hotplug for MKTME keys Alison Schofield
2018-12-04  9:28   ` Peter Zijlstra
2018-12-05  5:32     ` Alison Schofield
2018-12-04  9:31   ` Peter Zijlstra
2018-12-05  5:36     ` Alison Schofield
2018-12-04  9:25 ` [RFC v2 00/13] Multi-Key Total Memory Encryption API (MKTME) Peter Zijlstra
2018-12-04  9:46   ` Kirill A. Shutemov
2018-12-05 20:32     ` Sakkinen, Jarkko
2018-12-06 11:22       ` Kirill A. Shutemov
2018-12-06 14:59         ` Dave Hansen
2018-12-07 10:12           ` Huang, Kai
2018-12-06 21:23         ` Sakkinen, Jarkko
2018-12-07 11:54           ` Kirill A. Shutemov
2018-12-04 19:19 ` Andy Lutomirski
2018-12-04 20:00   ` Andy Lutomirski
2018-12-04 20:32     ` Dave Hansen
2018-12-05 22:19   ` Sakkinen, Jarkko
2018-12-07  2:05     ` Huang, Kai
2018-12-07  6:48       ` Jarkko Sakkinen
2018-12-07 11:57     ` Kirill A. Shutemov
2018-12-07 21:59       ` Sakkinen, Jarkko
2018-12-07 23:45         ` Sakkinen, Jarkko
2018-12-07 23:48           ` Andy Lutomirski
2018-12-08  1:33           ` Huang, Kai
2018-12-08  3:53             ` Sakkinen, Jarkko
2018-12-12 15:31           ` Sakkinen, Jarkko
2018-12-12 16:29             ` Andy Lutomirski
2018-12-12 16:43               ` Sakkinen, Jarkko
2018-12-12 23:27                 ` Huang, Kai
2018-12-13  5:49                   ` Sakkinen, Jarkko
2018-12-13  5:52                     ` Sakkinen, Jarkko
2018-12-12 23:24               ` Huang, Kai
2018-12-07 23:35       ` Eric Rannaud
2018-12-05 23:49   ` Dave Hansen
2018-12-06  1:09     ` Andy Lutomirski
2018-12-06  1:25       ` Dan Williams
2018-12-06 15:39       ` Dave Hansen
2018-12-06 19:10         ` Andy Lutomirski
2018-12-06 19:31           ` Dave Hansen
2018-12-07  1:55       ` Huang, Kai
2018-12-07  4:23         ` Dave Hansen
2018-12-07 23:53         ` Andy Lutomirski
2018-12-08  1:11           ` Dave Hansen
2018-12-08  2:07           ` Huang, Kai
2018-12-05 20:30 ` Sakkinen, Jarkko

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f0ff967e2015a9dffceef22ac52ecd736a1ddb7e.1543903910.git.alison.schofield@intel.com \
    --to=alison.schofield@intel.com \
    --cc=bp@alien8.de \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@intel.com \
    --cc=dhowells@redhat.com \
    --cc=hpa@zytor.com \
    --cc=jarkko.sakkinen@intel.com \
    --cc=jmorris@namei.org \
    --cc=jun.nakajima@intel.com \
    --cc=kai.huang@intel.com \
    --cc=keyrings@vger.kernel.org \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=linux-mm@kvack.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Security-Module Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-security-module/0 linux-security-module/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-security-module linux-security-module/ https://lore.kernel.org/linux-security-module \
		linux-security-module@vger.kernel.org linux-security-module@archiver.kernel.org
	public-inbox-index linux-security-module


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-security-module


AGPL code for this site: git clone https://public-inbox.org/ public-inbox