Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/8] xhci fixes for usb-linus
@ 2019-10-04 11:59 Mathias Nyman
  2019-10-04 11:59 ` [PATCH 1/8] xhci: Fix false warning message about wrong bounce buffer write length Mathias Nyman
                   ` (7 more replies)
  0 siblings, 8 replies; 16+ messages in thread
From: Mathias Nyman @ 2019-10-04 11:59 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb, Mathias Nyman

Hi Greg

A set of xhci fixes for usb-linus, for exaple fix a NULL pointer
dereference, remove a false warning, resolve a couple link power management
related bandwidth issues, and correctly detect USB 3.1 capability on hosts
based on early xHCI 1.1 specs.

-Mathias

Bill Kuzeja (1):
  xhci: Prevent deadlock when xhci adapter breaks during init

Jan Schmidt (1):
  xhci: Check all endpoints for LPM timeout

Kai-Heng Feng (1):
  xhci: Increase STS_SAVE timeout in xhci_suspend()

Mathias Nyman (4):
  xhci: Fix false warning message about wrong bounce buffer write length
  xhci: Prevent device initiated U1/U2 link pm if exit latency is too
    long
  xhci: Fix USB 3.1 capability detection on early xHCI 1.1 spec based
    hosts
  xhci: Fix NULL pointer dereference in xhci_clear_tt_buffer_complete()

Rick Tseng (1):
  usb: xhci: wait for CNR controller not ready bit in xhci resume

 drivers/usb/host/xhci-ring.c |  4 +--
 drivers/usb/host/xhci.c      | 78 +++++++++++++++++++++++++++++++++++---------
 2 files changed, 65 insertions(+), 17 deletions(-)

-- 
2.7.4


^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, back to index

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-04 11:59 [PATCH 0/8] xhci fixes for usb-linus Mathias Nyman
2019-10-04 11:59 ` [PATCH 1/8] xhci: Fix false warning message about wrong bounce buffer write length Mathias Nyman
2019-10-04 11:59 ` [PATCH 2/8] xhci: Prevent device initiated U1/U2 link pm if exit latency is too long Mathias Nyman
2019-10-04 11:59 ` [PATCH 3/8] xhci: Check all endpoints for LPM timeout Mathias Nyman
2019-10-04 11:59 ` [PATCH 4/8] xhci: Fix USB 3.1 capability detection on early xHCI 1.1 spec based hosts Mathias Nyman
2019-10-04 11:59 ` [PATCH 5/8] usb: xhci: wait for CNR controller not ready bit in xhci resume Mathias Nyman
2019-10-04 11:59 ` [PATCH 6/8] xhci: Prevent deadlock when xhci adapter breaks during init Mathias Nyman
2019-10-04 11:59 ` [PATCH 7/8] xhci: Increase STS_SAVE timeout in xhci_suspend() Mathias Nyman
     [not found]   ` <20191006120750.5334F2087E@mail.kernel.org>
2019-10-07 18:51     ` Kai-Heng Feng
2019-10-04 11:59 ` [PATCH 8/8] xhci: Fix NULL pointer dereference in xhci_clear_tt_buffer_complete() Mathias Nyman
2019-10-07 14:02   ` Johan Hovold
2019-10-08  8:15     ` Mathias Nyman
2019-10-11 12:47       ` Mathias Nyman
2019-10-11 12:58         ` [RFT PATCH] xhci: Fix use-after-free regression in xhci clear hub TT implementation Mathias Nyman
2019-10-14 10:16           ` Johan Hovold
2019-10-14 13:18             ` Mathias Nyman

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git