linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg KH <gregkh@linuxfoundation.org>
To: Tejas Joglekar <Tejas.Joglekar@synopsys.com>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	John Youn <John.Youn@synopsys.com>
Subject: Re: [RESENDING RFC PATCH 1/4] dt-bindings: usb: Add snps,consolidate-sgl & consolidate-sgl
Date: Fri, 27 Mar 2020 11:24:09 +0100	[thread overview]
Message-ID: <20200327102409.GB1700570@kroah.com> (raw)
In-Reply-To: <11a058bc-a947-a763-680f-a11fd454925a@synopsys.com>

On Fri, Mar 27, 2020 at 10:11:59AM +0000, Tejas Joglekar wrote:
> Hi,
> On 3/27/2020 3:24 PM, Greg KH wrote:
> > On Fri, Mar 27, 2020 at 03:11:56PM +0530, Tejas Joglekar wrote:
> >> This commit adds the documentation for consolidate-sgl, and
> >> snps,consolidate-sgl property. These when set enables the quirk for
> >> XHCI driver for consolidation of sg list into a temporary buffer when small
> >> buffer sizes are scattered over the sg list not making up to MPS or total
> >> transfer size within TRB cache size with Synopsys xHC.
> >>
> >> Signed-off-by: Tejas Joglekar <joglekar@synopsys.com>
> >> ---
> >>  Documentation/devicetree/bindings/usb/dwc3.txt     | 3 +++
> >>  Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++
> >>  2 files changed, 6 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
> >> index 9946ff9ba735..292d1f7969e4 100644
> >> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
> >> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
> >> @@ -104,6 +104,9 @@ Optional properties:
> >>  			this and tx-thr-num-pkt-prd to a valid, non-zero value
> >>  			1-16 (DWC_usb31 programming guide section 1.2.3) to
> >>  			enable periodic ESS TX threshold.
> >> + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use
> >> +			SG buffers of at least MPS size by consolidating smaller SG
> >> +			buffers list into a single buffer.
> >>  
> >>   - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
> >>   - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0
> >> diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
> >> index 3f378951d624..a90d853557ee 100644
> >> --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
> >> +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
> >> @@ -43,6 +43,9 @@ Optional properties:
> >>    - quirk-broken-port-ped: set if the controller has broken port disable mechanism
> >>    - imod-interval-ns: default interrupt moderation interval is 5000ns
> >>    - phys : see usb-hcd.yaml in the current directory
> >> +  - consolidate-sgl: indicate if you need to consolidate sg list into a
> >> +    temporary buffer when small SG buffer sizes does not make upto MPS
> >> +    size or total transfer size across the TRB cache size.
> > 
> > Shouldn't this refer to the fact that the hardware is broken?  Otherwise
> > why would anyone know if they should, or should not, enable this option?
> >
> We have not seen issue with Linux environment for now. But with other OS with
> SG list with very small buffer sizes the xHC controller hang was seen. So 
> currently introducing the binding as optional one. One could enable this 
> option when xHC halt happens due to small SG list sizes.  

What I mean is this should be something like,
"quirk-broken-sg-list-handler" or something like that.  Otherwise how
does anyone know if this really is needed or not.  Reading this would
seem like everyone would like to do this, as consolidating links
sounds like a good optimization, when instead this really cause more
memory allocations, making this possibly worse performance.

thanks,

greg k-h

  reply	other threads:[~2020-03-27 10:24 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-27  8:52 [RESENDING RFC PATCH 0/4] Add logic to consolidate TRBs for Synopsys xHC Tejas Joglekar
2020-03-27  8:34 ` [RFC PATCH 1/4] dt-bindings: usb: Add snps,consolidate-sgl & consolidate-sgl Tejas Joglekar
2020-03-27  9:41   ` [RESENDING RFC " Tejas Joglekar
2020-03-27  9:54   ` Greg KH
2020-03-27 10:11     ` Tejas Joglekar
2020-03-27 10:24       ` Greg KH [this message]
2020-03-27 10:28         ` Tejas Joglekar
2020-04-05  1:45   ` Rob Herring
2020-04-14 10:09     ` Tejas Joglekar
2020-04-16  8:22       ` Felipe Balbi
2020-04-16 16:37         ` Tejas Joglekar
2020-04-17 11:44           ` Mathias Nyman
2020-03-27  8:35 ` [RFC PATCH 2/4] usb: xhci: Set quirk for XHCI_CONSOLIDATE_SG_LIST Tejas Joglekar
2020-03-27  9:42   ` [RESENDING RFC " Tejas Joglekar
2020-03-27  8:35 ` [RFC PATCH 3/4] usb: dwc3: Add device property consolidate-sgl Tejas Joglekar
2020-03-27  9:42   ` [RESENDING RFC " Tejas Joglekar
2020-03-27  8:53 ` [RESENDING RFC PATCH 4/4] usb: xhci: Use temporary buffer to consolidate SG Tejas Joglekar
2020-03-27  9:27   ` Greg KH
2020-03-27 10:05     ` Tejas Joglekar
2020-03-27 10:22       ` Greg KH
2020-03-27 11:25         ` Mathias Nyman
2020-03-27 15:38           ` Raul Rangel
2020-03-27  9:28 ` [RESENDING RFC PATCH 0/4] Add logic to consolidate TRBs for Synopsys xHC Greg KH
2020-03-27  9:43   ` Tejas Joglekar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200327102409.GB1700570@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=John.Youn@synopsys.com \
    --cc=Tejas.Joglekar@synopsys.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).