From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: linux@roeck-us.net, heikki.krogerus@linux.intel.com,
gregkh@linuxfoundation.org, andersson@kernel.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org
Cc: wcheng@codeaurora.org, caleb.connolly@linaro.org,
bryan.odonoghue@linaro.org, konrad.dybcio@linaro.org,
subbaram@quicinc.com, jackp@quicinc.com,
robertom@qti.qualcomm.com
Subject: [PATCH v4 06/18] dt-bindings: usb: Add Qualcomm PMIC Type-C controller YAML schema
Date: Sat, 18 Mar 2023 12:18:16 +0000 [thread overview]
Message-ID: <20230318121828.739424-7-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20230318121828.739424-1-bryan.odonoghue@linaro.org>
Add a YAML binding for the Type-C silicon interface inside Qualcomm's
pm8150b hardware block.
The Type-C driver operates with a pdphy driver inside of a high level
single TCPM device.
Based on original work by Wesley.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../bindings/usb/qcom,pmic-typec.yaml | 88 +++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
new file mode 100644
index 0000000000000..d87bbab88d8be
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm PMIC based USB type C Detection Driver
+
+maintainers:
+ - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+ Qualcomm PMIC Type C Detect
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8150b-typec
+
+ reg:
+ maxItems: 1
+ description: Type C base address
+
+ interrupts:
+ items:
+ - description: Bitmask of CC attach, VBUS error, tCCDebounce done and more
+ - description: VCONN Powered Detection
+ - description: CC state change
+ - description: VCONN over-current condition
+ - description: VBUS state change
+ - description: Attach Deteach notification
+ - description: Legacy cable detect
+ - description: Try.Src Try.Snk state change
+
+ interrupt-names:
+ items:
+ - const: or-rid-detect-change
+ - const: vpd-detect
+ - const: cc-state-change
+ - const: vconn-oc
+ - const: vbus-change
+ - const: attach-detach
+ - const: legacy-cable-detect
+ - const: try-snk-src-detect
+
+ vdd-vbus-supply:
+ description: VBUS power supply.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - vdd-vbus-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/usb/typec/qcom,pmic-typec.h>
+ pm8150b {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8150b_typec: typec@1500 {
+ compatible = "qcom,pm8150b-typec";
+ reg = <0x1500>;
+ interrupts = <0x2 0x15 PMIC_TYPEC_OR_RID_IRQ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 PMIC_TYPEC_VPD_IRQ IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 PMIC_TYPEC_CC_STATE_IRQ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 PMIC_TYPEC_VCONN_OC_IRQ IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 PMIC_TYPEC_VBUS_IRQ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 PMIC_TYPEC_ATTACH_DETACH_IRQ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 PMIC_TYPEC_LEGACY_CABLE_IRQ IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 PMIC_TYPEC_TRY_SNK_SRC_IRQ IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "or-rid-detect-change",
+ "vpd-detect",
+ "cc-state-change",
+ "vconn-oc",
+ "vbus-change",
+ "attach-detach",
+ "legacy-cable-detect",
+ "try-snk-src-detect";
+ vdd-vbus-supply = <&pm8150b_vbus>;
+ };
+ };
+...
--
2.39.2
next prev parent reply other threads:[~2023-03-18 12:18 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-18 12:18 [PATCH v4 00/18] Add Qualcomm PMIC TPCM support Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 01/18] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark reg as required Bryan O'Donoghue
2023-03-19 11:41 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 02/18] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark regulator-*-microamp required Bryan O'Donoghue
2023-03-19 11:42 ` Krzysztof Kozlowski
2023-03-19 11:53 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 03/18] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add orientation-switch as optional Bryan O'Donoghue
2023-03-19 11:42 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 04/18] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add port as an optional Bryan O'Donoghue
2023-03-19 11:45 ` Krzysztof Kozlowski
2023-03-21 20:49 ` Rob Herring
2023-03-22 14:01 ` Bryan O'Donoghue
2023-03-23 13:39 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 05/18] dt-bindings: usb: Add qcom,pmic-typec dt-binding header Bryan O'Donoghue
2023-03-19 11:50 ` Krzysztof Kozlowski
2023-03-19 14:50 ` Bryan O'Donoghue
2023-03-18 12:18 ` Bryan O'Donoghue [this message]
2023-03-19 11:53 ` [PATCH v4 06/18] dt-bindings: usb: Add Qualcomm PMIC Type-C controller YAML schema Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 07/18] dt-bindings: usb: Add qcom,pmic-pdphy dt-binding header Bryan O'Donoghue
2023-03-19 11:50 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 08/18] dt-bindings: usb: Add Qualcomm PMIC PDPHY controller YAML schema Bryan O'Donoghue
2023-03-19 11:55 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 09/18] dt-bindings: usb: Add Qualcomm PMIC TCPM " Bryan O'Donoghue
2023-03-19 11:58 ` Krzysztof Kozlowski
2023-03-19 14:59 ` Bryan O'Donoghue
2023-03-19 15:10 ` Krzysztof Kozlowski
2023-03-19 15:44 ` Bryan O'Donoghue
2023-03-19 17:50 ` Krzysztof Kozlowski
2023-03-19 21:31 ` Caleb Connolly
2023-03-19 22:34 ` Bryan O'Donoghue
2023-03-19 22:32 ` Bryan O'Donoghue
2023-03-19 15:50 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 10/18] dt-bindings: mfd: qcom,spmi-pmic: Add pdphy to SPMI device types Bryan O'Donoghue
2023-03-19 11:58 ` Krzysztof Kozlowski
2023-03-21 20:58 ` Rob Herring
2023-03-21 23:52 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 11/18] dt-bindings: mfd: qcom,spmi-pmic: Add typec " Bryan O'Donoghue
2023-03-19 11:59 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 12/18] usb: typec: qcom: Add Qualcomm PMIC TCPM support Bryan O'Donoghue
2023-03-23 14:36 ` Jianhua Lu
2023-03-23 17:31 ` Bryan O'Donoghue
2023-03-24 0:43 ` Jianhua Lu
2023-03-24 0:53 ` Bryan O'Donoghue
2023-03-24 1:13 ` Jianhua Lu
2023-03-24 2:37 ` Bryan O'Donoghue
2023-03-24 10:16 ` Jianhua Lu
2023-03-24 13:25 ` Bryan O'Donoghue
2023-03-24 15:09 ` Jianhua Lu
2023-03-24 16:03 ` Bryan O'Donoghue
2023-03-24 14:00 ` Heikki Krogerus
2023-03-24 14:22 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 13/18] phy: qcom-qmp: Register as a typec switch for orientation detection Bryan O'Donoghue
2023-03-18 16:42 ` kernel test robot
2023-03-20 11:15 ` Neil Armstrong
2023-03-20 11:19 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 14/18] arm64: dts: qcom: pm8150b: Add a TCPM description Bryan O'Donoghue
2023-03-18 13:13 ` Konrad Dybcio
2023-03-18 21:09 ` kernel test robot
2023-03-18 12:18 ` [PATCH v4 15/18] arm64: dts: qcom: qrb5165-rb5: Switch on Type-C VBUS boost Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 16/18] arm64: dts: qcom: qrb5165-rb5: Switch on basic TCPM Bryan O'Donoghue
2023-03-18 13:09 ` Konrad Dybcio
2023-03-18 12:18 ` [PATCH v4 17/18] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for usb_1 Bryan O'Donoghue
2023-03-18 13:10 ` Konrad Dybcio
2023-03-18 17:46 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 18/18] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM orientation-switch for usb_1_qmpphy Bryan O'Donoghue
2023-03-18 13:11 ` Konrad Dybcio
2023-03-18 17:47 ` Bryan O'Donoghue
2023-03-24 15:10 ` [PATCH v4 00/18] Add Qualcomm PMIC TPCM support Luca Weiss
2023-03-24 15:28 ` Bryan O'Donoghue
2023-03-31 8:48 ` Luca Weiss
2023-03-31 13:52 ` Bryan O'Donoghue
2023-03-31 14:58 ` Luca Weiss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230318121828.739424-7-bryan.odonoghue@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=andersson@kernel.org \
--cc=caleb.connolly@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=jackp@quicinc.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robertom@qti.qualcomm.com \
--cc=robh+dt@kernel.org \
--cc=subbaram@quicinc.com \
--cc=wcheng@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).