From: "Luca Weiss" <luca.weiss@fairphone.com>
To: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>,
<linux@roeck-us.net>, <heikki.krogerus@linux.intel.com>,
<gregkh@linuxfoundation.org>, <andersson@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<linux-usb@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: <wcheng@codeaurora.org>, <caleb.connolly@linaro.org>,
<konrad.dybcio@linaro.org>, <subbaram@quicinc.com>,
<jackp@quicinc.com>, <robertom@qti.qualcomm.com>,
<lujianhua000@gmail.com>
Subject: Re: [PATCH v4 00/18] Add Qualcomm PMIC TPCM support
Date: Fri, 31 Mar 2023 10:48:46 +0200 [thread overview]
Message-ID: <CRKFT6BE3AW9.3OH8GRUPW2TLN@otso> (raw)
In-Reply-To: <9c541f81-8501-a142-1df8-6e71509c0d88@linaro.org>
Hi Bryan,
On Fri Mar 24, 2023 at 4:28 PM CET, Bryan O'Donoghue wrote:
> On 24/03/2023 15:10, Luca Weiss wrote:
> > When plugging in the device with TCPM on into my PC (peripheral mode)
> > then the USB device registers and unregisters every couple of seconds,
> > never stays stable on. No messages in dmesg when this happens. This only
> > happens with the USB-C plug in one direction, in the other it
> > works reliable.
>
> Sounds like we need to do some SoC specific debug on orientation
> switching in the PHY.
I also know that the phone has a AW35743 chip in the USB path,
controlled by DP_AUX_EN and DP_AUX_SEL gpios but I think this is only
for displayport, right?
>
> I wonder how many lanes dp_opts->lanes says for your part ?
Not sure.. Where is this configured?
But I also don't have DisplayPort over USB-C (video out) configured yet.
Related question: does video out work on sm8250+pm8150b for you?
>
> Also potentially not having "orientation-switch" in &usb_1_qmpphy{} but,
> I think we discussed that before.
Definitely have that in my device dts in that node.
When unplugged from my PC (USB-C->USB-A cable) I get
[ 1236.114620] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_vbus: 0x00000042 detect 0
When plugging in just
[ 1261.890238] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_vbus: 0x00000062 detect 1
The same exact message also when plugging the USB-C plug the other way
on the phone.
When testing with a USB-C->USB-C cable the behavior is similar. Only one
orientation on the phone is stable, the other one has the same unstable
behavior. The direction on the laptop doesn't matter, both directions
(when not changing the phone direction) is stable. Not sure if this
indicates where something is wrong, I don't know enough USB-C for this
;)
>
> So either
>
> - PHY orientation turn-around isn't working or
Since plugging in a USB stick works both ways, I assume at least some
part of it is working?
> - DTS orientation-switch isn't happening for you
Not sure what this means / how to check.
I'm attaching the USB-C->USB-C logs both ways, maybe they also show
something interesting?
Regards
Luca
==================================================================================
USB stable (device plug orientation 1):
==================================================================================
[ 1722.130836] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x000000cb cc1 0x00000001 Ra cc2 0x00000002 Rd attached 1 cc=cc1
[ 1722.331025] qcom-qmp-combo-phy 88e8000.phy: Toggling orientation current 0 requested 2
[ 1722.331152] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: pdphy_set_roles: data_role_host=1 power_role_src=1
[ 1722.331182] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: set_pd_rx: on
[ 1722.331224] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_vconn: orientation 0 control 0x00000003 state on cc cc2 vconn cc1
[ 1722.333742] qcom,pmic-tcpm pm7250b-tcpm: set_vbus set: 1 result 0
[ 1722.333824] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1722.340158] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1722.373839] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x00000042 cc1 0x00000000 Open cc2 0x00000000 Open attached 0 cc=cc1
[ 1722.373880] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x00000042 cc1 0x00000000 Open cc2 0x00000000 Open attached 0 cc=cc1
[ 1722.373905] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: set_pd_rx: off
[ 1722.379037] qcom,pmic-tcpm pm7250b-tcpm: set_vbus set: 0 result 0
[ 1722.379080] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_vconn: orientation 0 control 0x00000000 state off cc cc2 vconn cc1
[ 1722.379098] qcom-qmp-combo-phy 88e8000.phy: Toggling orientation current 2 requested 0
[ 1722.379171] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: pdphy_set_roles: data_role_host=1 power_role_src=1
[ 1722.379193] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: start_toggling: misc 0x00000042 attached 0 port_type 0 current cc 4 new 4
[ 1722.379234] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_vbus: 0x00000042 detect 0
[ 1722.383528] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1722.448649] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1722.448717] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 1722.449835] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000000010010
[ 1722.449871] xhci-hcd xhci-hcd.1.auto: irq 188, io mem 0x0a600000
[ 1722.449972] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1722.449982] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 1722.449992] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1722.450112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[ 1722.450121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1722.450127] usb usb1: Product: xHCI Host Controller
[ 1722.450132] usb usb1: Manufacturer: Linux 6.2.1-00102-gc2551b66fbe7-dirty xhci-hcd
[ 1722.450138] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 1722.450468] hub 1-0:1.0: USB hub found
[ 1722.450494] hub 1-0:1.0: 1 port detected
[ 1722.451703] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1722.451810] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[ 1722.451822] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1722.451831] usb usb2: Product: xHCI Host Controller
[ 1722.451839] usb usb2: Manufacturer: Linux 6.2.1-00102-gc2551b66fbe7-dirty xhci-hcd
[ 1722.451846] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 1722.452491] hub 2-0:1.0: USB hub found
[ 1722.452524] hub 2-0:1.0: 1 port detected
[ 1722.453143] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 1722.453153] usb usb2: USB disconnect, device number 1
[ 1722.454619] xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered
[ 1722.454640] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 1722.454653] usb usb1: USB disconnect, device number 1
[ 1722.457569] xhci-hcd xhci-hcd.1.auto: USB bus 1 deregistered
[ 1723.255900] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x000000cb cc1 0x00000001 Ra cc2 0x00000002 Rd attached 1 cc=cc1
[ 1723.255956] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x000000cb cc1 0x00000001 Ra cc2 0x00000002 Rd attached 1 cc=cc1
[ 1723.456104] qcom-qmp-combo-phy 88e8000.phy: Toggling orientation current 0 requested 2
[ 1723.456214] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: pdphy_set_roles: data_role_host=1 power_role_src=1
[ 1723.456238] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: set_pd_rx: on
[ 1723.456283] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_vconn: orientation 0 control 0x00000003 state on cc cc2 vconn cc1
[ 1723.458727] qcom,pmic-tcpm pm7250b-tcpm: set_vbus set: 1 result 0
[ 1723.458784] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.466539] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1723.503200] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.503241] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.507535] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1723.523733] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.523808] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.535554] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1723.543851] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.543892] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.551553] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1723.565097] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.571515] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.575554] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1723.576416] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1723.576482] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 1723.577757] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000000010010
[ 1723.577850] xhci-hcd xhci-hcd.1.auto: irq 188, io mem 0x0a600000
[ 1723.578172] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1723.578216] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 1723.578258] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1723.578680] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[ 1723.578723] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1723.578747] usb usb1: Product: xHCI Host Controller
[ 1723.578755] usb usb1: Manufacturer: Linux 6.2.1-00102-gc2551b66fbe7-dirty xhci-hcd
[ 1723.578760] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 1723.579187] hub 1-0:1.0: USB hub found
[ 1723.579211] hub 1-0:1.0: 1 port detected
[ 1723.579480] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1723.579548] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[ 1723.579555] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1723.579560] usb usb2: Product: xHCI Host Controller
[ 1723.579564] usb usb2: Manufacturer: Linux 6.2.1-00102-gc2551b66fbe7-dirty xhci-hcd
[ 1723.579569] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 1723.581083] qcom-qmp-combo-phy 88e8000.phy: Toggling orientation current 2 requested 2
[ 1723.581144] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: pdphy_set_roles: data_role_host=0 power_role_src=1
[ 1723.581192] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.581234] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.581661] hub 2-0:1.0: USB hub found
[ 1723.581690] hub 2-0:1.0: 1 port detected
[ 1723.582636] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 1723.582659] usb usb2: USB disconnect, device number 1
[ 1723.586362] xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered
[ 1723.586421] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 1723.586456] usb usb1: USB disconnect, device number 1
[ 1723.591097] xhci-hcd xhci-hcd.1.auto: USB bus 1 deregistered
[ 1723.591580] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1723.602619] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.602793] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.611512] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1723.623020] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.623062] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.631625] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1723.644262] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.650769] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc1
[ 1723.651546] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1723.662850] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_vconn: orientation 0 control 0x00000000 state off cc cc2 vconn cc1
- unplug -
[ 1867.223052] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x00000042 cc1 0x00000000 Open cc2 0x00000000 Open attached 0 cc=cc1
[ 1867.223277] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: set_pd_rx: off
[ 1867.226027] qcom,pmic-tcpm pm7250b-tcpm: set_vbus set: 0 result 0
[ 1867.226064] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_vconn: orientation 0 control 0x00000000 state off cc cc2 vconn cc1
[ 1867.226084] qcom-qmp-combo-phy 88e8000.phy: Toggling orientation current 2 requested 0
[ 1867.226145] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: pdphy_set_roles: data_role_host=0 power_role_src=1
[ 1867.226167] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: start_toggling: misc 0x00000042 attached 0 port_type 0 current cc 5 new 4
[ 1867.226212] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_vbus: 0x00000042 detect 0
[ 1867.236933] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
==================================================================================
USB unstable (device plug orientation 2):
==================================================================================
[ 1894.263324] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x000000c9 cc1 0x00000002 Rd cc2 0x00000001 Ra attached 1 cc=cc2
[ 1894.463482] qcom-qmp-combo-phy 88e8000.phy: Toggling orientation current 0 requested 1
[ 1894.463616] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: pdphy_set_roles: data_role_host=1 power_role_src=1
[ 1894.463646] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: set_pd_rx: on
[ 1894.463690] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_vconn: orientation 4 control 0x00000007 state on cc cc1 vconn cc2
[ 1894.466173] qcom,pmic-tcpm pm7250b-tcpm: set_vbus set: 1 result 0
[ 1894.466257] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1894.474797] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1894.505894] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x00000040 cc1 0x00000000 Open cc2 0x00000000 Open attached 0 cc=cc2
[ 1894.505935] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x00000040 cc1 0x00000000 Open cc2 0x00000000 Open attached 0 cc=cc2
[ 1894.505963] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: set_pd_rx: off
[ 1894.510880] qcom,pmic-tcpm pm7250b-tcpm: set_vbus set: 0 result 0
[ 1894.510920] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_vconn: orientation 4 control 0x00000000 state off cc cc1 vconn cc2
[ 1894.510940] qcom-qmp-combo-phy 88e8000.phy: Toggling orientation current 1 requested 0
[ 1894.511021] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: pdphy_set_roles: data_role_host=1 power_role_src=1
[ 1894.511043] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: start_toggling: misc 0x00000040 attached 0 port_type 0 current cc 4 new 4
[ 1894.511084] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_vbus: 0x00000000 detect 0
[ 1894.516552] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1894.581138] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1894.581171] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 1894.582287] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000000010010
[ 1894.582330] xhci-hcd xhci-hcd.1.auto: irq 188, io mem 0x0a600000
[ 1894.582464] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1894.582479] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 1894.582493] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1894.582649] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[ 1894.582661] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1894.582670] usb usb1: Product: xHCI Host Controller
[ 1894.582677] usb usb1: Manufacturer: Linux 6.2.1-00102-gc2551b66fbe7-dirty xhci-hcd
[ 1894.582685] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 1894.583211] hub 1-0:1.0: USB hub found
[ 1894.583255] hub 1-0:1.0: 1 port detected
[ 1894.583830] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1894.583960] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[ 1894.583975] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1894.583987] usb usb2: Product: xHCI Host Controller
[ 1894.583996] usb usb2: Manufacturer: Linux 6.2.1-00102-gc2551b66fbe7-dirty xhci-hcd
[ 1894.584006] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 1894.584742] hub 2-0:1.0: USB hub found
[ 1894.584782] hub 2-0:1.0: 1 port detected
[ 1894.585437] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 1894.585452] usb usb2: USB disconnect, device number 1
[ 1894.588024] xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered
[ 1894.588046] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 1894.588060] usb usb1: USB disconnect, device number 1
[ 1894.591836] xhci-hcd xhci-hcd.1.auto: USB bus 1 deregistered
[ 1895.388351] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x000000c9 cc1 0x00000002 Rd cc2 0x00000001 Ra attached 1 cc=cc2
[ 1895.388407] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x000000c9 cc1 0x00000002 Rd cc2 0x00000001 Ra attached 1 cc=cc2
[ 1895.588568] qcom-qmp-combo-phy 88e8000.phy: Toggling orientation current 0 requested 1
[ 1895.588643] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: pdphy_set_roles: data_role_host=1 power_role_src=1
[ 1895.588664] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: set_pd_rx: on
[ 1895.588705] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_vconn: orientation 4 control 0x00000007 state on cc cc1 vconn cc2
[ 1895.591193] qcom,pmic-tcpm pm7250b-tcpm: set_vbus set: 1 result 0
[ 1895.591250] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.598187] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1895.635829] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.635940] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.640601] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1895.657692] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.657766] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.664570] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1895.677799] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.677836] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.684618] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1895.698467] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.704570] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1895.705452] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1895.705514] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 1895.706625] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000000010010
[ 1895.706658] xhci-hcd xhci-hcd.1.auto: irq 188, io mem 0x0a600000
[ 1895.706747] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1895.706755] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 1895.706764] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1895.706824] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.707209] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[ 1895.707250] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1895.707280] usb usb1: Product: xHCI Host Controller
[ 1895.707305] usb usb1: Manufacturer: Linux 6.2.1-00102-gc2551b66fbe7-dirty xhci-hcd
[ 1895.707331] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 1895.708504] hub 1-0:1.0: USB hub found
[ 1895.708635] hub 1-0:1.0: 1 port detected
[ 1895.709607] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1895.709928] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[ 1895.709970] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1895.709999] usb usb2: Product: xHCI Host Controller
[ 1895.710023] usb usb2: Manufacturer: Linux 6.2.1-00102-gc2551b66fbe7-dirty xhci-hcd
[ 1895.710049] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 1895.711360] hub 2-0:1.0: USB hub found
[ 1895.711392] hub 2-0:1.0: 1 port detected
[ 1895.712739] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1895.714685] qcom-qmp-combo-phy 88e8000.phy: Toggling orientation current 1 requested 1
[ 1895.714749] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: pdphy_set_roles: data_role_host=0 power_role_src=1
[ 1895.714795] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.714837] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.715104] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 1895.715114] usb usb2: USB disconnect, device number 1
[ 1895.718866] xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered
[ 1895.718889] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 1895.718901] usb usb1: USB disconnect, device number 1
[ 1895.725858] xhci-hcd xhci-hcd.1.auto: USB bus 1 deregistered
[ 1895.726158] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1895.735069] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.735135] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.744571] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1895.756079] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.756119] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=1 Rp-1.5-180uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.764615] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1895.776343] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.782944] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_cc: currsrc=2 Rp-3.0-330uA mode EN_SRC_ONLY debounce 1 attached 1 cc=cc2
[ 1895.784556] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
[ 1895.795184] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_vconn: orientation 4 control 0x00000000 state off cc cc1 vconn cc2
- unplug -
[ 1907.264840] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x00000040 cc1 0x00000000 Open cc2 0x00000000 Open attached 0 cc=cc2
[ 1907.264888] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_cc: misc 0x00000040 cc1 0x00000000 Open cc2 0x00000000 Open attached 0 cc=cc2
[ 1907.265075] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: set_pd_rx: off
[ 1907.267897] qcom,pmic-tcpm pm7250b-tcpm: set_vbus set: 0 result 0
[ 1907.267932] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: set_vconn: orientation 4 control 0x00000000 state off cc cc1 vconn cc2
[ 1907.267951] qcom-qmp-combo-phy 88e8000.phy: Toggling orientation current 1 requested 0
[ 1907.268011] qcom,pmic-usb-pdphy c440000.spmi:pmic@2:pdphy@1700: pdphy_set_roles: data_role_host=0 power_role_src=1
[ 1907.268034] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: start_toggling: misc 0x00000040 attached 0 port_type 0 current cc 5 new 4
[ 1907.268081] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: get_vbus: 0x00000040 detect 0
[ 1907.272422] qcom,pmic-typec c440000.spmi:pmic@2:typec@1500: Debounce cc complete
next prev parent reply other threads:[~2023-03-31 8:48 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-18 12:18 [PATCH v4 00/18] Add Qualcomm PMIC TPCM support Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 01/18] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark reg as required Bryan O'Donoghue
2023-03-19 11:41 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 02/18] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark regulator-*-microamp required Bryan O'Donoghue
2023-03-19 11:42 ` Krzysztof Kozlowski
2023-03-19 11:53 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 03/18] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add orientation-switch as optional Bryan O'Donoghue
2023-03-19 11:42 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 04/18] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add port as an optional Bryan O'Donoghue
2023-03-19 11:45 ` Krzysztof Kozlowski
2023-03-21 20:49 ` Rob Herring
2023-03-22 14:01 ` Bryan O'Donoghue
2023-03-23 13:39 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 05/18] dt-bindings: usb: Add qcom,pmic-typec dt-binding header Bryan O'Donoghue
2023-03-19 11:50 ` Krzysztof Kozlowski
2023-03-19 14:50 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 06/18] dt-bindings: usb: Add Qualcomm PMIC Type-C controller YAML schema Bryan O'Donoghue
2023-03-19 11:53 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 07/18] dt-bindings: usb: Add qcom,pmic-pdphy dt-binding header Bryan O'Donoghue
2023-03-19 11:50 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 08/18] dt-bindings: usb: Add Qualcomm PMIC PDPHY controller YAML schema Bryan O'Donoghue
2023-03-19 11:55 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 09/18] dt-bindings: usb: Add Qualcomm PMIC TCPM " Bryan O'Donoghue
2023-03-19 11:58 ` Krzysztof Kozlowski
2023-03-19 14:59 ` Bryan O'Donoghue
2023-03-19 15:10 ` Krzysztof Kozlowski
2023-03-19 15:44 ` Bryan O'Donoghue
2023-03-19 17:50 ` Krzysztof Kozlowski
2023-03-19 21:31 ` Caleb Connolly
2023-03-19 22:34 ` Bryan O'Donoghue
2023-03-19 22:32 ` Bryan O'Donoghue
2023-03-19 15:50 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 10/18] dt-bindings: mfd: qcom,spmi-pmic: Add pdphy to SPMI device types Bryan O'Donoghue
2023-03-19 11:58 ` Krzysztof Kozlowski
2023-03-21 20:58 ` Rob Herring
2023-03-21 23:52 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 11/18] dt-bindings: mfd: qcom,spmi-pmic: Add typec " Bryan O'Donoghue
2023-03-19 11:59 ` Krzysztof Kozlowski
2023-03-18 12:18 ` [PATCH v4 12/18] usb: typec: qcom: Add Qualcomm PMIC TCPM support Bryan O'Donoghue
2023-03-23 14:36 ` Jianhua Lu
2023-03-23 17:31 ` Bryan O'Donoghue
2023-03-24 0:43 ` Jianhua Lu
2023-03-24 0:53 ` Bryan O'Donoghue
2023-03-24 1:13 ` Jianhua Lu
2023-03-24 2:37 ` Bryan O'Donoghue
2023-03-24 10:16 ` Jianhua Lu
2023-03-24 13:25 ` Bryan O'Donoghue
2023-03-24 15:09 ` Jianhua Lu
2023-03-24 16:03 ` Bryan O'Donoghue
2023-03-24 14:00 ` Heikki Krogerus
2023-03-24 14:22 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 13/18] phy: qcom-qmp: Register as a typec switch for orientation detection Bryan O'Donoghue
2023-03-18 16:42 ` kernel test robot
2023-03-20 11:15 ` Neil Armstrong
2023-03-20 11:19 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 14/18] arm64: dts: qcom: pm8150b: Add a TCPM description Bryan O'Donoghue
2023-03-18 13:13 ` Konrad Dybcio
2023-03-18 21:09 ` kernel test robot
2023-03-18 12:18 ` [PATCH v4 15/18] arm64: dts: qcom: qrb5165-rb5: Switch on Type-C VBUS boost Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 16/18] arm64: dts: qcom: qrb5165-rb5: Switch on basic TCPM Bryan O'Donoghue
2023-03-18 13:09 ` Konrad Dybcio
2023-03-18 12:18 ` [PATCH v4 17/18] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for usb_1 Bryan O'Donoghue
2023-03-18 13:10 ` Konrad Dybcio
2023-03-18 17:46 ` Bryan O'Donoghue
2023-03-18 12:18 ` [PATCH v4 18/18] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM orientation-switch for usb_1_qmpphy Bryan O'Donoghue
2023-03-18 13:11 ` Konrad Dybcio
2023-03-18 17:47 ` Bryan O'Donoghue
2023-03-24 15:10 ` [PATCH v4 00/18] Add Qualcomm PMIC TPCM support Luca Weiss
2023-03-24 15:28 ` Bryan O'Donoghue
2023-03-31 8:48 ` Luca Weiss [this message]
2023-03-31 13:52 ` Bryan O'Donoghue
2023-03-31 14:58 ` Luca Weiss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CRKFT6BE3AW9.3OH8GRUPW2TLN@otso \
--to=luca.weiss@fairphone.com \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=caleb.connolly@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=jackp@quicinc.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lujianhua000@gmail.com \
--cc=robertom@qti.qualcomm.com \
--cc=robh+dt@kernel.org \
--cc=subbaram@quicinc.com \
--cc=wcheng@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).