[PATCH v3 5/8] dt-bindings: input: document stpmic1 pmic onkey

[Pascal PAILLET-LME <p.paillet@st.com>]

From: pascal paillet <p.paillet@st.com>

The stpmic1 pmic is able to manage an onkey button. It can be configured
to shut-down the power supplies on a long key-press with an adjustable
duration.

Signed-off-by: pascal paillet <p.paillet@st.com>
---
changes in v3:
* Replace st,onkey-long-press-seconds and st,onkey-pwroff-enabled by 
power-off-time-sec.

 .../devicetree/bindings/input/st,stpmic1-onkey.txt | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt

diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
new file mode 100644
index 0000000..8c58186
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
@@ -0,0 +1,30 @@
+STMicroelectronics STPMIC1 Onkey
+
+Required properties:
+
+- compatible = "st,stpmic1-onkey";
+- interrupt-parent: phandle to the parent interrupt controller
+- interrupts: interrupt line to use
+- interrupt-names = "onkey-falling", "onkey-rising"
+	onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic
+	onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic
+
+Optional properties:
+
+- st,onkey-clear-cc-flag: onkey is able power on after an
+  over-current shutdown event.
+- st,onkey-pu-inactive: onkey pull up is not active
+- power-off-time-sec: Duration in seconds which the key should be kept
+        pressed for device to power off automatically (from 1 to 16 seconds).
+        see See Documentation/devicetree/bindings/input/keys.txt
+
+Example:
+
+onkey {
+	compatible = "st,stpmic1-onkey";
+	interrupt-parent = <&pmic>;
+	interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+	interrupt-names = "onkey-falling", "onkey-rising";
+	st,onkey-pwroff-enabled;
+	st,onkey-long-press-seconds = <10>;
+};
-- 
1.9.1