linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pascal PAILLET-LME <p.paillet@st.com>
To: "dmitry.torokhov@gmail.com" <dmitry.torokhov@gmail.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"lee.jones@linaro.org" <lee.jones@linaro.org>,
	"lgirdwood@gmail.com" <lgirdwood@gmail.com>,
	"broonie@kernel.org" <broonie@kernel.org>,
	"wim@linux-watchdog.org" <wim@linux-watchdog.org>,
	"linux@roeck-us.net" <linux@roeck-us.net>,
	"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-watchdog@vger.kernel.org" <linux-watchdog@vger.kernel.org>,
	"benjamin.gaignard@linaro.org" <benjamin.gaignard@linaro.org>,
	"eballetbo@gmail.com" <eballetbo@gmail.com>
Cc: Pascal PAILLET-LME <p.paillet@st.com>
Subject: [PATCH v3 6/8] input: stpmic1: add stpmic1 onkey driver
Date: Mon, 8 Oct 2018 16:29:41 +0000	[thread overview]
Message-ID: <1539016176-4072-7-git-send-email-p.paillet@st.com> (raw)
In-Reply-To: <1539016176-4072-1-git-send-email-p.paillet@st.com>

From: pascal paillet <p.paillet@st.com>

The stpmic1 pmic is able to manage an onkey button. This driver exposes
the stpmic1 onkey as an input device. It can also be configured to
shut-down the power supplies on a long key-press with an adjustable
duration.

Signed-off-by: pascal paillet <p.paillet@st.com>
---
changes in v3:
* Rename struct stpmic1_dev by struct stpmic1.
* Replace of_property_ by device_property.
* Remove log in IRQ handler.
* Add email address in MODULE_AUTHOR.

 drivers/input/misc/Kconfig         |  11 ++
 drivers/input/misc/Makefile        |   2 +
 drivers/input/misc/stpmic1_onkey.c | 248 +++++++++++++++++++++++++++++++++++++
 3 files changed, 261 insertions(+)
 create mode 100644 drivers/input/misc/stpmic1_onkey.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index ca59a2b..279fb02 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -851,4 +851,15 @@ config INPUT_SC27XX_VIBRA
 	  To compile this driver as a module, choose M here. The module will
 	  be called sc27xx_vibra.
 
+config INPUT_STPMIC1_ONKEY
+	tristate "STPMIC1 PMIC Onkey support"
+	depends on MFD_STPMIC1
+	help
+	  Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey
+	  can be used to wakeup from low power modes and force a shut-down on
+	  long press.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stpmic1_onkey.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 9d0f9d1..1b44202 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
 obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY)	+= soc_button_array.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
+obj-$(CONFIG_INPUT_STPMIC1_ONKEY)  	+= stpmic1_onkey.o
 obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON)	+= tps65218-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
@@ -81,3 +82,4 @@ obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
 obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
 obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR)	+= ideapad_slidebar.o
+
diff --git a/drivers/input/misc/stpmic1_onkey.c b/drivers/input/misc/stpmic1_onkey.c
new file mode 100644
index 0000000..871a087
--- /dev/null
+++ b/drivers/input/misc/stpmic1_onkey.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2018
+// Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stpmic1.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+/**
+ * struct stpmic1_onkey - OnKey data
+ * @pmic:		pointer to STPMIC1 PMIC device
+ * @input_dev:		pointer to input device
+ * @irq_falling:	irq that we are hooked on to
+ * @irq_rising:		irq that we are hooked on to
+ */
+struct stpmic1_onkey {
+	struct stpmic1 *pmic;
+	struct input_dev *input_dev;
+	int irq_falling;
+	int irq_rising;
+};
+
+/**
+ * struct pmic_onkey_config - configuration of pmic PONKEYn
+ * @cc_flag_clear:		value to clear CC flag in case of PowerOff
+ * trigger by longkey press
+ * @onkey_pullup_val:		value of PONKEY PullUp (active or inactive)
+ * @power_off_time_sec:		value for long press h/w shutdown event
+ */
+struct pmic_onkey_config {
+	bool cc_flag_clear;
+	u8 onkey_pullup_val;
+	u8 power_off_time_sec;
+};
+
+static irqreturn_t onkey_falling_irq(int irq, void *ponkey)
+{
+	struct stpmic1_onkey *onkey = ponkey;
+	struct input_dev *input_dev = onkey->input_dev;
+
+	input_report_key(input_dev, KEY_POWER, 1);
+	pm_wakeup_event(input_dev->dev.parent, 0);
+	input_sync(input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t onkey_rising_irq(int irq, void *ponkey)
+{
+	struct stpmic1_onkey *onkey = ponkey;
+	struct input_dev *input_dev = onkey->input_dev;
+
+	input_report_key(input_dev, KEY_POWER, 0);
+	pm_wakeup_event(input_dev->dev.parent, 0);
+	input_sync(input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int stpmic1_onkey_dt_params(struct platform_device *pdev,
+				   struct stpmic1_onkey *onkey,
+				   struct pmic_onkey_config *config)
+{
+	struct device *dev = &pdev->dev;
+	u32 val;
+
+	onkey->irq_falling = platform_get_irq_byname(pdev, "onkey-falling");
+	if (onkey->irq_falling < 0) {
+		dev_err(dev, "failed: request IRQ onkey-falling %d\n",
+			onkey->irq_falling);
+		return onkey->irq_falling;
+	}
+
+	onkey->irq_rising = platform_get_irq_byname(pdev, "onkey-rising");
+	if (onkey->irq_rising < 0) {
+		dev_err(dev, "failed: request IRQ onkey-rising %d\n",
+			onkey->irq_rising);
+		return onkey->irq_rising;
+	}
+
+	if (!device_property_read_u32(dev, "power-off-time-sec", &val)) {
+		if ((val > 0) && (val <= 16)) {
+			config->power_off_time_sec = val;
+		} else {
+			dev_err(dev, "power-off-time-sec out of range\n");
+			return -EINVAL;
+		}
+	}
+
+	if (device_property_present(dev, "st,onkey-clear-cc-flag"))
+		config->cc_flag_clear = true;
+
+	if (device_property_present(dev, "st,onkey-pu-inactive"))
+		config->onkey_pullup_val = PONKEY_PU_ACTIVE;
+
+	dev_dbg(dev, "onkey-switch-off duration=%d seconds\n",
+		config->power_off_time_sec);
+
+	return 0;
+}
+
+static int stpmic1_onkey_probe(struct platform_device *pdev)
+{
+	struct stpmic1 *pmic = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct input_dev *input_dev;
+	struct stpmic1_onkey *onkey;
+	struct pmic_onkey_config config;
+	unsigned int val = 0;
+	int error;
+
+	onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
+	if (!onkey)
+		return -ENOMEM;
+
+	memset(&config, 0, sizeof(struct pmic_onkey_config));
+	error = stpmic1_onkey_dt_params(pdev, onkey, &config);
+	if (error)
+		return error;
+
+	input_dev = devm_input_allocate_device(dev);
+	if (!input_dev) {
+		dev_err(dev, "Can't allocate Pwr Onkey Input Device\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "pmic_onkey";
+	input_dev->phys = "pmic_onkey/input0";
+
+	input_set_capability(input_dev, EV_KEY, KEY_POWER);
+
+	/* Setup Power Onkey Hardware parameters (long key press)*/
+	if (config.power_off_time_sec > 0) {
+		val |= PONKEY_PWR_OFF;
+		val |= ((16 - config.power_off_time_sec) &
+			PONKEY_TURNOFF_TIMER_MASK);
+	}
+	if (config.cc_flag_clear)
+		val |= PONKEY_CC_FLAG_CLEAR;
+	error = regmap_update_bits(pmic->regmap, PKEY_TURNOFF_CR,
+				   PONKEY_TURNOFF_MASK, val);
+	if (error) {
+		dev_err(dev, "LONG_PRESS_KEY_UPDATE failed: %d\n", error);
+		return error;
+	}
+
+	error = regmap_update_bits(pmic->regmap, PADS_PULL_CR,
+				   PONKEY_PU_ACTIVE,
+				   config.onkey_pullup_val);
+	if (error) {
+		dev_err(dev, "ONKEY Pads configuration failed: %d\n", error);
+		return error;
+	}
+
+	onkey->pmic = pmic;
+	onkey->input_dev = input_dev;
+
+	/* interrupt is nested in a thread */
+	error = devm_request_threaded_irq(dev, onkey->irq_falling, NULL,
+					  onkey_falling_irq, IRQF_ONESHOT,
+					  dev_name(dev), onkey);
+	if (error) {
+		dev_err(dev, "Can't get IRQ Onkey Falling: %d\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(dev, onkey->irq_rising, NULL,
+					  onkey_rising_irq, IRQF_ONESHOT,
+					  dev_name(dev), onkey);
+	if (error) {
+		dev_err(dev, "Can't get IRQ Onkey Rising: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(dev, "Can't register power button: %d\n", error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, onkey);
+	device_init_wakeup(dev, true);
+
+	return 0;
+}
+
+static int stpmic1_onkey_remove(struct platform_device *pdev)
+{
+	struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
+
+	input_unregister_device(onkey->input_dev);
+	return 0;
+}
+
+static int __maybe_unused stpmic1_onkey_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(dev)) {
+		enable_irq_wake(onkey->irq_falling);
+		enable_irq_wake(onkey->irq_rising);
+	}
+	return 0;
+}
+
+static int __maybe_unused stpmic1_onkey_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(dev)) {
+		disable_irq_wake(onkey->irq_falling);
+		disable_irq_wake(onkey->irq_rising);
+	}
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stpmic1_onkey_pm,
+			 stpmic1_onkey_suspend,
+			 stpmic1_onkey_resume);
+
+static const struct of_device_id of_stpmic1_onkey_match[] = {
+	{ .compatible = "st,stpmic1-onkey" },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, of_stpmic1_onkey_match);
+
+static struct platform_driver stpmic1_onkey_driver = {
+	.probe	= stpmic1_onkey_probe,
+	.remove	= stpmic1_onkey_remove,
+	.driver	= {
+		.name	= "stpmic1_onkey",
+		.of_match_table = of_match_ptr(of_stpmic1_onkey_match),
+		.pm	= &stpmic1_onkey_pm,
+	},
+};
+module_platform_driver(stpmic1_onkey_driver);
+
+MODULE_DESCRIPTION("Onkey driver for STPMIC1");
+MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

  parent reply	other threads:[~2018-10-08 16:29 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-08 16:29 [PATCH v3 0/8] Introduce STPMIC1 PMIC Driver Pascal PAILLET-LME
2018-10-08 16:29 ` [PATCH v3 1/8] dt-bindings: mfd: document stpmic1 Pascal PAILLET-LME
2018-10-12 15:28   ` Rob Herring
2018-10-08 16:29 ` [PATCH v3 2/8] mfd: stpmic1: add stpmic1 driver Pascal PAILLET-LME
2018-10-08 16:29 ` [PATCH v3 3/8] dt-bindings: regulator: document stpmic1 pmic regulators Pascal PAILLET-LME
2018-10-12 15:32   ` Rob Herring
2018-10-08 16:29 ` [PATCH v3 4/8] regulator: stpmic1: add stpmic1 regulator driver Pascal PAILLET-LME
2018-10-08 16:29 ` [PATCH v3 5/8] dt-bindings: input: document stpmic1 pmic onkey Pascal PAILLET-LME
2018-10-09 13:52   ` Pascal PAILLET-LME
2018-10-12 15:33   ` Rob Herring
2018-10-08 16:29 ` [PATCH v3 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog Pascal PAILLET-LME
2018-10-08 16:29 ` Pascal PAILLET-LME [this message]
2018-10-15 22:32   ` [PATCH v3 6/8] input: stpmic1: add stpmic1 onkey driver dmitry.torokhov
2018-10-08 16:29 ` [PATCH v3 8/8] watchdog: stpmic1: add stpmic1 watchdog driver Pascal PAILLET-LME
2018-10-08 16:35   ` Randy Dunlap
2018-10-09  0:47   ` kbuild test robot
2018-10-09 21:44     ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1539016176-4072-7-git-send-email-p.paillet@st.com \
    --to=p.paillet@st.com \
    --cc=benjamin.gaignard@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=eballetbo@gmail.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).