Linux-Watchdog Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
@ 2019-11-22  8:24 Christophe Roullier
  2019-11-22 10:28 ` [Linux-stm32] " Ahmad Fatoum
  2019-11-22 10:45 ` Guenter Roeck
  0 siblings, 2 replies; 5+ messages in thread
From: Christophe Roullier @ 2019-11-22  8:24 UTC (permalink / raw)
  To: wim, linux, mcoquelin.stm32, alexandre.torgue
  Cc: linux-watchdog, christophe.roullier, linux-kernel, linux-stm32,
	linux-arm-kernel

If the watchdog hardware is already enabled during the boot process,
when the Linux watchdog driver loads, it should start/reset the watchdog
and tell the watchdog framework. As a result, ping can be generated from
the watchdog framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set),
until the userspace watchdog daemon takes over control

Fixes:4332d113c66a ("watchdog: Add STM32 IWDG driver")

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
---
Changes since v1:
According to Guenter
I follow the guidance from intel-mid_wdt.c
and I added test to check if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set
because we need to be flexible (depends on customer config, but watchdog
not always start by bootloader (Uboot, ..))
I've tested some config and it is working as expected:
Watchdog enable in Uboot + HANDLE_BOOT_ENABLE is not set + daemon watchdog in userland ON ==> No reset IWDG2
Watchdog enable in Uboot + HANDLE_BOOT_ENABLE is not set ==> Reset IWDG2
Watchdog enable in Uboot + HANDLE_BOOT_ENABLE=y ==> No reset IWDG2
Watchdog enable in Uboot + HANDLE_BOOT_ENABLE=y + daemon watchdog in userland ON puis OFF ==> Reset IWDG2
Watchdog disable in Uboot + HANDLE_BOOT_ENABLE is not set ==> No reset IWDG2
Watchdog disable in Uboot + HANDLE_BOOT_ENABLE=y ==> No reset IWDG2
Watchdog disable in Uboot + HANDLE_BOOT_ENABLE=y + daemon watchdog in userland ON ==> No reset IWDG2
Watchdog disable in Uboot + HANDLE_BOOT_ENABLE=y + daemon watchdog in userland ON puis OFF ==> Reset IWDG2

Thanks,
Christophe

 drivers/watchdog/stm32_iwdg.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c
index a3a329011a06..7f454a6e17ba 100644
--- a/drivers/watchdog/stm32_iwdg.c
+++ b/drivers/watchdog/stm32_iwdg.c
@@ -50,6 +50,9 @@
 #define TIMEOUT_US	100000
 #define SLEEP_US	1000
 
+static bool handle_boot_enabled =
+	IS_ENABLED(CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED);
+
 struct stm32_iwdg_data {
 	bool has_pclk;
 	u32 max_prescaler;
@@ -262,6 +265,24 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
 	watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT);
 	watchdog_init_timeout(wdd, 0, dev);
 
+	/*
+	 * In case of CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set
+	 * (Means U-Boot/bootloaders leaves the watchdog running)
+	 * When we get here we should make a decision to prevent
+	 * any side effects before user space daemon will take care of it.
+	 * The best option, taking into consideration that there is no
+	 * way to read values back from hardware, is to enforce watchdog
+	 * being run with deterministic values.
+	 */
+	if (handle_boot_enabled) {
+		ret = stm32_iwdg_start(wdd);
+		if (ret)
+			return ret;
+
+		/* Make sure the watchdog is serviced */
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+	}
+
 	ret = devm_watchdog_register_device(dev, wdd);
 	if (ret)
 		return ret;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-22  8:24 [PATCH v2 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe Christophe Roullier
2019-11-22 10:28 ` [Linux-stm32] " Ahmad Fatoum
2019-11-22 13:15   ` Christophe ROULLIER
2019-11-22 13:31     ` Ahmad Fatoum
2019-11-22 10:45 ` Guenter Roeck

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org
	public-inbox-index linux-watchdog

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git