From: Peter Rosin <peda@axentia.se>
To: Janusz Krzysztofik <jmkrzyszt@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>,
Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>,
Peter Korsgaard <peter.korsgaard@barco.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Dominik Brodowski <linux@dominikbrodowski.net>,
Kishon Vijay Abraham I <kishon@ti.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.com>,
linux-gpio@vger.kernel.org, linux-doc@vger.kernel.org,
linux-i2c@vger.kernel.org, linux-mmc@vger.kernel.org,
netdev@vger.kernel.org, linux-iio@vger.kernel.org,
devel@driverdev.osuosl.org, linux-serial@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [RFC RFT PATCH v4 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array
Date: Tue, 21 Aug 2018 08:49:24 +0200 [thread overview]
Message-ID: <0e79bdc3-ca20-6823-c86f-5e9da7dafbc9@axentia.se> (raw)
In-Reply-To: <20180820234341.5271-2-jmkrzyszt@gmail.com>
On 2018-08-21 01:43, Janusz Krzysztofik wrote:
> Most users of get/set array functions iterate consecutive bits of data,
> usually a single integer, while or processing array of results obtained
> from or building an array of values to be passed to those functions.
> Save time wasted on those iterations by changing the functions' API to
> accept bitmaps.
>
> All current users are updated as well.
>
> More benefits from the change are expected as soon as planned support
> for accepting/passing those bitmaps directly from/to respective GPIO
> chip callbacks if applicable is implemented.
>
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
> ---
> Documentation/driver-api/gpio/consumer.rst | 22 ++++----
> drivers/auxdisplay/hd44780.c | 52 +++++++++--------
> drivers/bus/ts-nbus.c | 19 ++-----
> drivers/gpio/gpio-max3191x.c | 17 +++---
> drivers/gpio/gpiolib.c | 86 +++++++++++++++--------------
> drivers/gpio/gpiolib.h | 4 +-
> drivers/i2c/muxes/i2c-mux-gpio.c | 3 +-
> drivers/mmc/core/pwrseq_simple.c | 13 ++---
> drivers/mux/gpio.c | 4 +-
> drivers/net/phy/mdio-mux-gpio.c | 3 +-
> drivers/pcmcia/soc_common.c | 11 ++--
> drivers/phy/motorola/phy-mapphone-mdm6600.c | 17 +++---
> drivers/staging/iio/adc/ad7606.c | 9 +--
> drivers/tty/serial/serial_mctrl_gpio.c | 7 ++-
> include/linux/gpio/consumer.h | 18 +++---
> 15 files changed, 138 insertions(+), 147 deletions(-)
>
*snip*
> diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
> index 401308e3d036..d675e0ca2fa4 100644
> --- a/drivers/i2c/muxes/i2c-mux-gpio.c
> +++ b/drivers/i2c/muxes/i2c-mux-gpio.c
> @@ -27,13 +27,14 @@ struct gpiomux {
>
> static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
> {
> + unsigned long value_bitmap[1] = { val, };
> int i;
>
> for (i = 0; i < mux->data.n_gpios; i++)
> mux->values[i] = (val >> i) & 1;
>
> gpiod_set_array_value_cansleep(mux->data.n_gpios,
> - mux->gpios, mux->values);
> + mux->gpios, value_bitmap);
> }
>
> static int i2c_mux_gpio_select(struct i2c_mux_core *muxc, u32 chan)
Please take the opportunity to completely get rid of the values member
in struct mux_gpio. It no longer serves any purpose.
*snip*
> diff --git a/drivers/mux/gpio.c b/drivers/mux/gpio.c
> index 6fdd9316db8b..cc2d5f50472a 100644
> --- a/drivers/mux/gpio.c
> +++ b/drivers/mux/gpio.c
> @@ -23,14 +23,14 @@ struct mux_gpio {
> static int mux_gpio_set(struct mux_control *mux, int state)
> {
> struct mux_gpio *mux_gpio = mux_chip_priv(mux->chip);
> + unsigned long value_bitmap[1] = { state, };
> int i;
>
> for (i = 0; i < mux_gpio->gpios->ndescs; i++)
> mux_gpio->val[i] = (state >> i) & 1;
>
> gpiod_set_array_value_cansleep(mux_gpio->gpios->ndescs,
> - mux_gpio->gpios->desc,
> - mux_gpio->val);
> + mux_gpio->gpios->desc, value_bitmap);
>
> return 0;
> }
Dito (but the member name is val).
*snip*
Cheers,
Peter
next prev parent reply other threads:[~2018-08-21 6:49 UTC|newest]
Thread overview: 206+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-18 23:57 [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors for data I/O Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 1/8] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-07-19 6:17 ` Boris Brezillon
2018-07-20 17:57 ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 2/8] mtd: rawnand: ams-delta: Write protect device during probe Janusz Krzysztofik
2018-07-19 6:22 ` Boris Brezillon
2018-07-20 18:02 ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 3/8] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik
2018-07-19 6:23 ` Boris Brezillon
2018-07-20 18:12 ` Janusz Krzysztofik
2018-07-20 19:29 ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 4/8] mtd: rawnand: ams-delta: Optimize pointer resolution on read/write Janusz Krzysztofik
2018-07-19 6:25 ` Boris Brezillon
2018-07-20 18:14 ` Janusz Krzysztofik
2018-07-20 19:29 ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 5/8] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik
2018-07-19 6:28 ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 6/8] gpio: omap: Add get/set_multiple() callbacks Janusz Krzysztofik
2018-07-29 20:29 ` Linus Walleij
2018-08-03 1:52 ` Grygorii Strashko
2018-08-03 16:47 ` Linus Walleij
2018-07-18 23:57 ` [RFC PATCH 7/8] mtd: rawnand: ams-delta: Check sanity of data GPIO resource Janusz Krzysztofik
2018-07-19 6:44 ` Boris Brezillon
2018-07-29 20:36 ` Linus Walleij
2018-07-29 21:16 ` Boris Brezillon
2018-07-29 20:33 ` Linus Walleij
2018-07-18 23:57 ` [RFC PATCH 8/8] mtd: rawnand: ams-delta: Use GPIO callbacks for data I/O Janusz Krzysztofik
2018-07-19 6:47 ` Boris Brezillon
2018-07-20 18:38 ` Janusz Krzysztofik
2018-07-20 19:48 ` Boris Brezillon
2018-07-19 6:15 ` [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors " Boris Brezillon
2018-07-20 17:55 ` Janusz Krzysztofik
2018-07-20 19:25 ` Boris Brezillon
2018-10-03 12:00 ` [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op() Janusz Krzysztofik
2018-10-03 12:30 ` Boris Brezillon
2018-10-03 13:55 ` Janusz Krzysztofik
2018-10-03 14:06 ` Boris Brezillon
2018-10-04 13:52 ` Janusz Krzysztofik
2018-10-04 13:59 ` Boris Brezillon
2018-10-04 14:11 ` Janusz Krzysztofik
2018-10-04 14:22 ` Boris Brezillon
2018-10-12 20:41 ` [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin Janusz Krzysztofik
2018-10-12 20:41 ` [PATCH v2 2/2] mtd: rawnand: ams-delta: Use ->exec_op() Janusz Krzysztofik
2018-10-13 6:05 ` Boris Brezillon
2018-10-13 5:55 ` [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin Boris Brezillon
2018-10-15 19:41 ` [PATCH v3 1/3] " Janusz Krzysztofik
2018-10-15 19:41 ` [PATCH v3 2/3] mtd: rawnand: ams-delta: Stop using legacy .IOADDR_R/W Janusz Krzysztofik
2018-10-15 19:41 ` [PATCH v3 3/3] mtd: rawnand: ams-delta: Convert the driver to ->exec_op() Janusz Krzysztofik
2018-11-11 20:53 ` [PATCH v3 1/3] mtd: rawnand: Provide helper for polling GPIO R/B pin Miquel Raynal
2018-08-06 22:29 ` [RFC PATCH v2] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-08-06 22:29 ` [RFC PATCH v2 01/12] mtd: rawnand: ams-delta: Assign mtd->dev.parent, not mtd->owner Janusz Krzysztofik
2018-08-06 23:54 ` Marek Vasut
2018-08-07 21:55 ` Janusz Krzysztofik
2018-08-07 16:57 ` Boris Brezillon
2018-08-06 22:29 ` [RFC PATCH v2 02/12] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-07 16:59 ` Boris Brezillon
2018-08-06 22:29 ` [RFC PATCH v2 03/12] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-08-07 16:59 ` Boris Brezillon
2018-08-10 10:10 ` Linus Walleij
2018-08-06 22:29 ` [RFC PATCH v2 04/12] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik
2018-08-07 17:00 ` Boris Brezillon
2018-08-10 10:11 ` Linus Walleij
2018-08-06 22:29 ` [RFC PATCH v2 05/12] mtd: rawnand: ams-delta: use GPIO API for data read/write Janusz Krzysztofik
2018-08-06 23:57 ` Marek Vasut
2018-08-07 17:06 ` Boris Brezillon
2018-08-07 17:11 ` Janusz Krzysztofik
2018-08-10 10:25 ` Linus Walleij
2018-08-06 22:29 ` [RFC PATCH v2 06/12] ARM: OMAP1: ams-delta: drop obsolete NAND resources Janusz Krzysztofik
2018-08-06 22:29 ` [RFC PATCH v2 07/12] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik
2018-08-07 18:57 ` Boris Brezillon
2018-08-08 16:55 ` Janusz Krzysztofik
2018-08-08 17:42 ` Miquel Raynal
2018-08-06 22:29 ` [RFC PATCH v2 08/12] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik
2018-08-07 17:02 ` Boris Brezillon
2018-08-07 17:15 ` Janusz Krzysztofik
2018-08-06 22:29 ` [RFC PATCH v2 09/12] gpiolib: Identify GPIO descriptor arrays with direct mapping Janusz Krzysztofik
2018-08-06 23:29 ` Linus Walleij
2018-08-07 16:50 ` Janusz Krzysztofik
2018-08-07 17:10 ` Boris Brezillon
2018-08-07 17:14 ` Boris Brezillon
2018-08-07 17:19 ` Janusz Krzysztofik
2018-08-06 22:29 ` [RFC PATCH v2 10/12] gpiolib: Introduce bitmap get/set array API extension Janusz Krzysztofik
2018-08-06 22:29 ` [RFC PATCH v2 11/12] mtd: rawnand: ams-delta: Use GPIO API bitmap extension Janusz Krzysztofik
2018-08-06 22:29 ` [RFC PATCH v2 12/12] gpiolib: Add fast processing path to bitmap API functions Janusz Krzysztofik
2018-08-06 23:43 ` Linus Walleij
2018-08-07 17:29 ` Janusz Krzysztofik
2018-08-07 17:47 ` Boris Brezillon
2018-08-10 10:55 ` Linus Walleij
2018-08-13 22:34 ` [PATCH v3 0/7] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-08-13 22:34 ` [PATCH v3 1/7] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-08-13 22:34 ` [PATCH v3 2/7] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-13 22:34 ` [PATCH v3 3/7] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-08-13 22:34 ` [PATCH v3 4/7] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik
2018-08-13 22:34 ` [PATCH v3 5/7] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-08-16 7:30 ` Boris Brezillon
2018-08-13 22:34 ` [PATCH v3 6/7] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik
2018-08-13 22:34 ` [PATCH v3 7/7] mtd: rawnand: ams-delta: use GPIO API for data I/O Janusz Krzysztofik
2018-08-16 7:39 ` Boris Brezillon
2018-08-20 21:39 ` [PATCH v4 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Janusz Krzysztofik
2018-08-20 21:39 ` [PATCH v4 1/3] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-08-20 21:39 ` [PATCH v4 2/3] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-20 21:39 ` [PATCH v4 3/3] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-08-24 12:57 ` Boris Brezillon
2018-09-05 6:47 ` [PATCH v4 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Miquel Raynal
2018-09-05 20:53 ` Janusz Krzysztofik
2018-09-07 16:45 ` Tony Lindgren
2018-09-19 8:46 ` Miquel Raynal
2018-09-19 22:52 ` [PATCH v5 " Janusz Krzysztofik
2018-09-19 22:52 ` [PATCH v5 1/3] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-09-19 22:52 ` [PATCH v5 2/3] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-09-19 22:52 ` [PATCH v5 3/3] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-09-23 11:35 ` [PATCH v5 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Miquel Raynal
2018-08-20 23:43 ` [RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-08-20 23:43 ` [RFC RFT PATCH v4 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-08-21 6:49 ` Peter Rosin [this message]
2018-08-21 6:52 ` Peter Rosin
2018-08-29 12:03 ` Miguel Ojeda
2018-08-29 18:01 ` Janusz Krzysztofik
2018-08-20 23:43 ` [RFC RFT PATCH v4 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-20 23:43 ` [RFC RFT PATCH v4 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-08-20 23:43 ` [RFC RFT PATCH v4 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-08-29 9:06 ` [RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing Linus Walleij
2018-08-29 18:16 ` Janusz Krzysztofik
2018-08-29 10:19 ` Ulf Hansson
2018-08-29 20:48 ` [PATH v5 " Janusz Krzysztofik
2018-08-29 20:48 ` [PATCH v5 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-08-30 4:30 ` Peter Rosin
2018-08-30 7:40 ` Geert Uytterhoeven
2018-08-30 11:10 ` Miguel Ojeda
2018-08-30 15:35 ` David Laight
2018-09-02 10:19 ` Janusz Krzysztofik
2018-08-31 9:14 ` Linus Walleij
2018-08-29 20:48 ` [PATCH v5 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-29 20:48 ` [PATCH v5 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-08-29 20:49 ` [PATCH v5 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-08-31 22:56 ` [PATH v6 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-08-31 22:56 ` [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-01 0:23 ` Peter Rosin
2018-09-04 15:28 ` kbuild test robot
2018-09-04 15:28 ` kbuild test robot
2018-08-31 22:56 ` [PATCH v6 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-31 22:56 ` [PATCH v6 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-04 15:27 ` kbuild test robot
2018-08-31 22:56 ` [PATCH v6 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-09-02 12:01 ` [PATCH v7 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-09-02 12:01 ` [PATCH v7 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-02 13:21 ` Lukas Wunner
2018-09-03 4:31 ` Matthew Wilcox
2018-09-03 14:24 ` Geert Uytterhoeven
2018-09-03 15:07 ` Geert Uytterhoeven
2018-09-04 15:29 ` kbuild test robot
2018-09-05 6:46 ` kbuild test robot
2018-09-02 12:01 ` [PATCH v7 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-09-02 12:01 ` [PATCH v7 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-03 14:21 ` Geert Uytterhoeven
2018-09-04 15:23 ` kbuild test robot
2018-09-05 7:11 ` kbuild test robot
2018-09-02 12:01 ` [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
[not found] ` <CGME20180920101151eucas1p221f5a1715b8556bb9d99bf08fe09ce6f@eucas1p2.samsung.com>
2018-09-20 10:11 ` Marek Szyprowski
2018-09-20 15:48 ` Janusz Krzysztofik
2018-09-20 16:21 ` Janusz Krzysztofik
2018-09-21 8:18 ` Marek Szyprowski
2018-09-21 10:51 ` Janusz Krzysztofik
2018-09-21 11:26 ` Janusz Krzysztofik
2018-09-21 14:14 ` Marek Szyprowski
2018-09-23 10:43 ` Janusz Krzysztofik
2018-09-23 23:53 ` [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path Janusz Krzysztofik
2018-09-23 23:53 ` [PATCH 1/2] gpiolib: Fix missing updates of bitmap index Janusz Krzysztofik
2018-09-24 8:11 ` Linus Walleij
2018-09-29 12:20 ` [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit() Janusz Krzysztofik
2018-10-01 6:46 ` Marek Szyprowski
2018-10-01 9:37 ` Linus Walleij
2018-09-23 23:53 ` [PATCH 2/2] gpiolib: Fix array members of same chip processed separately Janusz Krzysztofik
2018-09-24 8:13 ` Linus Walleij
2018-09-24 9:43 ` [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path Marek Szyprowski
2018-09-24 11:08 ` Janusz Krzysztofik
2018-09-24 11:38 ` Marek Szyprowski
2018-09-24 14:18 ` Janusz Krzysztofik
2018-09-25 19:24 ` [PATCH] mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap Janusz Krzysztofik
2018-09-26 7:50 ` Linus Walleij
2018-09-26 8:14 ` Marek Szyprowski
[not found] ` <7a4906d9-ffb1-f2af-07e7-d5815dcd0d8c@samsung.com>
2018-09-26 8:27 ` Marek Szyprowski
2018-10-12 19:09 ` [RFT PATCH] " Janusz Krzysztofik
2018-10-15 8:32 ` Marek Szyprowski
2018-10-15 10:29 ` Ulf Hansson
2018-10-15 14:27 ` Linus Walleij
2018-09-20 18:05 ` [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array Dan Carpenter
2018-09-20 15:49 ` Linus Walleij
2018-09-05 21:50 ` [PATCH v8 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-09-05 21:50 ` [PATCH v8 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-05 21:50 ` [PATCH v8 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-09-05 21:50 ` [PATCH v8 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-05 21:50 ` [PATCH v8 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-09-13 9:22 ` [PATCH v8 0/4] gpiolib: speed up GPIO array processing Linus Walleij
2018-09-19 18:08 ` Linus Walleij
2018-11-21 11:08 ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-11-21 11:08 ` [PATCH v4 1/4] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-11-23 17:02 ` Tony Lindgren
2018-11-21 11:08 ` [PATCH v4 2/4] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik
2018-11-21 11:08 ` [PATCH v4 3/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-11-21 14:53 ` Boris Brezillon
2018-11-21 11:08 ` [PATCH v4 4/4] ARM: OMAP1: ams-delta: Drop obsolete NAND resources Janusz Krzysztofik
2018-11-21 14:56 ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Boris Brezillon
2018-11-23 17:03 ` Tony Lindgren
2018-12-07 8:04 ` Miquel Raynal
2018-12-07 16:10 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0e79bdc3-ca20-6823-c86f-5e9da7dafbc9@axentia.se \
--to=peda@axentia.se \
--cc=Michael.Hennerich@analog.com \
--cc=andrew@lunn.ch \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=devel@driverdev.osuosl.org \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=jmkrzyszt@gmail.com \
--cc=jslaby@suse.com \
--cc=kishon@ti.com \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux@dominikbrodowski.net \
--cc=miguel.ojeda.sandonis@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peter.korsgaard@barco.com \
--cc=pmeerw@pmeerw.net \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).