* 2.6.10-rc2-mm1 @ 2004-11-16 9:42 Andrew Morton 2004-11-16 16:48 ` 2.6.10-rc2-mm1 - SELinux atomic_dec_and_test() bug James Morris ` (5 more replies) 0 siblings, 6 replies; 23+ messages in thread From: Andrew Morton @ 2004-11-16 9:42 UTC (permalink / raw) To: linux-kernel http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.10-rc2-mm1.gz will appear soon at ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc2/2.6.10-rc2-mm1/ - Various little fixes and features. Nothing major here. Changes since 2.6.10-rc1-mm5: linus.patch bk-acpi.patch bk-agpgart.patch bk-alsa.patch bk-cifs.patch bk-driver-core.patch bk-drm.patch bk-ia64.patch bk-ide-dev.patch bk-input.patch bk-dtor-input.patch bk-libata.patch bk-netdev.patch bk-ntfs.patch bk-scsi.patch bk-watchdog.patch Latest versions of external trees -compat-syscalls-naming-standardisation.patch -compat-syscalls-naming-standardisation-fix.patch -make-sysrq-f-call-oom_kill.patch -remove-contention-on-profile_lock.patch -fix-o_sync-speedup-for-generic_file_write_nolock.patch -mm-restore-atomic-buffer.patch -netpoll-fix-null-ifa_list-pointer-dereference.patch -e1000-stop-working-after-resume.patch -fix-for-8023ad-shutdown-issue.patch -ixgb-fix-ixgb_intr-looping-checks.patch -ppc32-add-setup_indirect_pci_nomap-routine.patch -added-mpc8555-8541-security-block-infrastructure.patch -ppc32-fix-rheap-warning.patch -ppc32-updated-reporting-of-cpu-rev-freq-for-e500-cpus.patch -ppc32-add-performance-counters-to-cpu_spec.patch -ppc32-remove-config_serial_console_baud.patch -update-ppc-list-addresses-in-maintainers.patch -ppc32-remove-__setup_cpu_8xx.patch -ppc32-remove-zero-initializations-in-cpu_specs.patch -ppc64-iseries-combine-some-mf-code.patch -ppc64-iseries-remove-trailing-white-space.patch -ppc64-iseries-remove-some-studly-caps.patch -ppc64-iseries-more-mf-cleanup.patch -ppc64-iseries-remove-more-studly-caps-from-mf-code.patch -ppc64-iseries-last-of-the-cleanups-fo-the-mf-code.patch -ppc64-bump-max_hwifs-in-ide-code.patch -ppc64-fix-for-cpu-hotplug-numa.patch -ppc64-small-of-fixes.patch -fix-page-size-assumption-in-fork.patch -ext3-compiler-warning-fix.patch -make-proc-kcore-conditional-on-config_mmu.patch -add-cpu_relax-in-spin-loops-clean-up-barrier-for-269.patch -optimize-stack-pointer-access-reduce-register-usage.patch -x86_64-ia32_aout-build-fix.patch -cris-architecture-update-configuration-and-build.patch -cris-architecture-update-update-simple-drivers.patch -cris-architecture-update-ethernet-driver.patch -cris-architecture-update-ide-driver.patch -cris-architecture-update-add-usb-host-driver.patch -cris-architecture-update-core-kernel-updates.patch -cris-architecture-update-console-setup-handling.patch -cris-architecture-update-move-drivers.patch -cris-architecture-update-update-makefiles.patch -cris-architecture-update-update-maintainers.patch -uml-use-sys_getpid-bypassing-glibc-fixes-uml-on-gentoo.patch -ext3-umount-hang.patch -sparc32-fix-for-hypersparc-dma-errors.patch -bad-naming-of-structures-and-functions-in-ext3-reservation-code.patch -statfs-compat-functions-can-return-eoverflow-on-nfs.patch -sysfs-fix-dropping-existing-dir.patch -force-feedback-support-for-uinput-cleanup.patch -drm_memory-warning-fix.patch -radix_tree_delete-fix.patch -v4l-yet-another-video-buf-interface-update.patch -v4l-add-video-buf-dvbc.patch -v4l-bttv-update.patch -v4l-bttv-update-fix.patch -v4l-bttv-update-fix2.patch -v4l-saa7134-update.patch -v4l-cx88-update.patch -v4l-saa7146-update.patch -v4l-tuner-modparam.patch -v4l-ir-common-modparam.patch -v4l-v4l1-compat-modparam.patch -v4l-msp3400-fix.patch -media-video-bw-qcamc-remove-an-unused-function.patch -dio-handle-eof.patch -o_direct-fix-again.patch -fbdev-fix-io-access-in-rivafb-part-2.patch -fbdev-fix-mode-handling-in-rivafb-if-with-no-edid.patch -fbdev-use-soft_cursor-in-i810fb.patch -fbdev-set-color-depth-to-8-if-in-pseudocolor-in-vesafb.patch -fbcon-split-set_con2fb_map.patch -fbdev-introduce-fb_blank_-constants.patch -fbdev-convert-drivers-to-use-the-new-fb_blank_-constants.patch -fbdev-fix-broken-fb_blank-implementation.patch -fbdev-add-vram-option-to-intelfb.patch -fbdev-fix-for-using-16-pixel-wide-font-in-fb-console.patch -fbdev-support-for-bigger-than-16x32-fonts-in-softcursor.patch -fbdev-support-for-bigger-than-16x32-fonts-in-rivafb-cursor.patch -fbcon-disable-fbcon-cursor-if-vt-softcursor-is-enabled.patch -fbdev-allow-mode-change-even-if-edid-block-is-not-found.patch -fbdev-fix-cursor-in-doublescan-mode-in-atyfb.patch -fbdev-fix-typo-in-atyfb.patch -fbdev-change-the-find_mode-behavior.patch -md-fix-problem-with-md-linear-for-devices-larger-than-2-terabytes.patch -md-fix-raid6-problem.patch -md-delete-unplug-timer-before-shutting-down-md-array.patch -md-delete-unplug-timer-before-shutting-down-md-array-cleanup.patch -blk_sync_queue-updates.patch -blk_sync_queue-updates-update.patch -md-faulty-personality.patch -remove-duplicate-safe_for_readread_buffer-entry-in-scsi_ioctlc.patch -md-documentation-mdtxt-update.patch -convert-module_parm-to-module_param-family.patch -more-module_parm-conversions.patch -kill-lockd_symsc.patch -aic-warning-fix.patch -lib-parser-fix-%%-parsing.patch -make-cdev_get-static-unexport.patch -unexport-task_nice.patch -limit-CONFIG_LEGACY_PTY_COUNT.patch Merged +4level-ia64-support-fix.patch +4level-architecture-changes-for-s390-fix.patch +uml-pml4-support.patch 4-level-pagetable fixes +numa-policies-for-file-mappings-mpol_mf_move.patch +numa-policies-for-file-mappings-mpol_mf_move-cachefs.patch NUMA memory allocation policy for file-backed mappings +fix-for-mpol-mm-corruption-on-tmpfs.patch tmpfs-vs-NUMA memory policy fix +mm-overcommit-updates.patch Various adjustments to the memory overcommit logic +ppc64-iseries-fix-viodasd-remove.patch +ppc64-iseries-purr-emulation-fix.patch ppc64 fixes +vm-routine-fixes-CONFIG_SHMEM-fix.patch Fix for the FRV preparatory work +intel-thermal-monitor-for-x86_64.patch temperature monitor driver +s390-network-driver.patch S/390 net driver updates (still under discussion) +kmap_atomic-takes-char-fix.patch +kunmap-fallout-more-fixes.patch Fix the kmap_atomic debugging changes +4-4gb-incorrect-bound-check-in-do_getname.patch do_getname() range checking fix +handle-quoted-module-parameters.patch yet another module parameter parsing fix +CONFIG_SOUND_VIA82CXXX_PROCFS.patch Fiddle with the /proc code in this audio driver (will drop this patch) +allow-admin-to-enable-only-some-of-the-magic-sysrq-functions.patch Allow the admin to disable particular sysrq features +gen_init_cpio-symlink-pipe-socket-support.patch +gen_init_cpio-slink_pipe_sock_2.patch Early userspace feature work +move-irq_enter-and-irq_exit-to-common-code.patch +remove-unused-irq_cpustat-fields.patch Code cleanups and consolidation +allow-nfs-exports-of-efs-filesystems.patch Permit EFS mounts to be exported over NFS +selinux-scalability-add-spin_trylock_irq-and.patch +selinux-scalability-convert-avc-to-rcu.patch +selinux-scalability-avc-statistics-and-tuning.patch SELinux SMP scalability fixes +oprofile-arch-independent-code-for-stack-trace-rename-timer_init.patch +oprofile-i386-support-for-stack-trace-sampling-tidy.patch tweaks to the oprofile call-graph patches -pcmcia-17-device-model-integration.patch -pcmcia-module_refcount-oops-fix.patch -pcmcia-18a-client_t-and-pcmcia_device-integration.patch -pcmcia-18b-error-on-leftover-devices.patch -pcmcia-19-netdevice-integration.patch +pcmcia-b17-device-model-integration.patch +pcmcia-b18a-client_t-and-pcmcia_device-integration.patch +pcmcia-b18b-error-on-leftover-devices.patch +pcmcia-b19-netdevice-integration.patch Updated pcmcia device model patch series +knfsd-nfsd_translate_wouldblocks.patch +knfsd-svcrpc-fqdn-length-fix.patch +knfsd-svcrpc-auth_null-fixes.patch +knfsd-svcrpc-share-code-duplicated-between-auth_unix-and-auth_null.patch +knfsd-nfsd4-fix-open_downgrade-decode-error.patch +knfsd-rpcsec_gss-comparing-pointer-to-0-instead-of-null.patch +knfsd-nfsd4-fix-fileid-in-readdir-responses.patch +knfsd-nfsd4-use-the-fsid-export-option-when-returning-the-fsid-attribute.patch +knfsd-nfsd4-encode_dirent-cleanup.patch +knfsd-nfsd4-encode_dirent-superfluous-assignment.patch +knfsd-nfsd4-encode_dirent-superfluous-local-variables.patch +knfsd-nfsd4-encode_dirent-more-readdir-attribute-encoding-to-new-function.patch +knfsd-nfsd4-encode_dirent-simplify-nfs4_encode_dirent_fattr.patch +knfsd-nfsd4-encode_dirent-move-rdattr_error-code-to-new-function.patch +knfsd-nfsd4-encode_dirent-simplify-error-handling.patch +knfsd-nfsd4-encode_dirent-simplify-control-flow.patch +knfsd-nfsd4-encode_dirent-fix-dropit-return.patch +knfsd-nfsd4-encode_dirent-trivial-cleanup.patch KNFSD update -kgdb-ga-fixes.patch Folded into kgdb-ga.patch -fix-cpm2-uart-driver-device-number-brain-damage.patch Dropped +perfctr-x86-core-updates.patch +perfctr-x86-driver-updates.patch +perfctr-x86-driver-cleanup.patch +perfctr-x86_64-core-updates.patch +perfctr-ppc32-driver-update.patch +perfctr-virtual-updates.patch +perfctr-virtual-cleanup.patch perfctr updates -add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix.patch -add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix-fix.patch Folded into add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch +x86-rename-apic_mode_exint.patch +x86-local-apic-fix.patch Fixes and cleanups to the kexec APIC handling code +reiser4-crypto-update.patch +reiser4-max_cbk_iteration-fix.patch +reiser4-reduce-stack-usage.patch +reiser4-fix-deadlock.patch +reiser4-dont-use-shrink_dcache_anon.patch -resier4-export-shrink_dcache_anon.patch -reiser4-disable-repacker.patch reiser4 updates and fixes -add-acpi-based-floppy-controller-enumeration-fix.patch -update-acpi-floppy-enumeration.patch -floppy-acpi-enumeration-update.patch Folded into add-acpi-based-floppy-controller-enumeration.patch -serial-8250-receive-lockup-fix.patch No longer needed -mpsc-driver-patch-fix.patch Folded into mpsc-driver-patch.patch +md-fix-problem-with-unsigned-variable-going-negative-in-linearc.patch +md-improve-hash-code-in-linearc.patch RAID fixes -thinkpad-fnfx-key-driver.patch Dropped - we can do this with a native ACPI driver now -make-acpi_bus_register_driver-consistent-with-pci_register_driver-again-warning-fix.patch Folded into make-acpi_bus_register_driver-consistent-with-pci_register_driver-again.patch -cputime-introduce-cputime-fix.patch Folded into cputime-introduce-cputime.patch +mm-check_rlimit-oops-on-p-signal.patch Fix the fix tot he cputime patches +cputime-microsecond-based-cputime-for-s390.patch Implement high-resolution cputime on S/390 +lock-initializer-cleanup-common-headers.patch +lock-initializer-cleanup-character-devices.patch +lock-initializer-cleanup-core.patch More cleanups to the way in whcih we initialise spinlocks +eth1394-module_parm-conversion.patch +tvaudio-and-tvmixer-module_param-conversion.patch +isapnp-module_param-conversion.patch +parport-module_param-conversion.patch +sr-module_param-conversion.patch +media-video-module_param-conversion.patch +btaudio-module_param-conversion.patch s/MODULE_PARM/module_param/ in various places number of patches in -mm: 422 number of changesets in external trees: 508 number of patches in -mm only: 407 total patches: 915 All 420 patches: linus.patch 4level-core-patch.patch 4level core patch 4level-bogus-bug_on.patch 4level: remove bogus BUG_ON() 4level-fix-vmalloc-overflow.patch 4level: fix vmalloc overflow 4level-core-tweaks.patch 4level core tweaks 4level-highpte-fix.patch 4level highpte fix 4level-architecture-changes-for-alpha.patch 4level: Architecture changes for alpha 4level-architecture-changes-for-arm.patch 4level: Architecture changes for arm 4level-fixes-arm.patch 4level fixes (ARM) 4level-architecture-changes-for-cris.patch 4level: Architecture changes for cris 4level-convert-drm-to-4levels.patch 4level: convert DRM to 4levels. 4level-add-asm-generic-support-for-emulating.patch 4level: Add asm-generic support for emulating 2/3level tables. 4level-make-3level-fallback-more-type-safe.patch 4level: make 3level fallback more type safe 4level-ia64-support.patch 4level: ia64 support 4level-ia64-support-fix.patch 4level-ia64-support fix 4level-architecture-changes-for-i386.patch 4level: Architecture changes for i386 4level-architecture-changes-for-i386-fix.patch 4level build fix 4level-architecture-changes-for-m32r.patch 4level: Architecture changes for m32r 4level-architecture-changes-for-ppc.patch 4level: Architecture changes for ppc 4level-architecture-changes-for-ppc64.patch 4level: Architecture changes for ppc64 4level-architecture-changes-for-s390.patch 4level: Architecture changes for s390 4level-architecture-changes-for-s390-fix.patch 4level-architecture-changes-for-s390 fix 4level-architecture-changes-for-sh.patch 4level: Architecture changes for sh 4level-architecture-changes-for-sh64.patch 4level: Architecture changes for sh64 4level-architecture-changes-for-sparc.patch 4level: Architecture changes for sparc 4level-architecture-changes-for-sparc64.patch 4level: Architecture changes for sparc64 4level-architecture-changes-for-x86_64.patch 4level: Architecture changes for x86_64 uml-pml4-support.patch uml: pml4 support bk-acpi.patch acpi-report-errors-in-fanc.patch ACPI: report errors in fan.c bk-agpgart.patch bk-alsa.patch bk-cifs.patch bk-driver-core.patch bk-drm.patch bk-ia64.patch fix-duplicate-config-for-ia64_mca_recovery.patch Fix duplicate config for IA64_MCA_RECOVERY bk-ide-dev.patch bk-input.patch bk-dtor-input.patch bk-libata.patch bk-netdev.patch bk-ntfs.patch bk-scsi.patch megaraid-22041-driver.patch megaraid 2.20.4.1 Driver bk-watchdog.patch mm.patch add -mmN to EXTRAVERSION fix-smm-failures-on-e750x-systems.patch fix SMM failures on E750x systems mm-keep-count-of-free-areas.patch mm: keep count of free areas mm-higher-order-watermarks.patch mm: higher order watermarks mm-higher-order-watermarks-fix.patch higher order watermarks fix mm-teach-kswapd-about-higher-order-areas.patch mm: teach kswapd about higher order areas numa-policies-for-file-mappings-mpol_mf_move.patch NUMA policies for file mappings + MPOL_MF_MOVE make-tree_lock-an-rwlock.patch make mapping->tree_lock an rwlock fix-for-mpol-mm-corruption-on-tmpfs.patch fix for mpol mm corruption on tmpfs mm-overcommit-updates.patch mm: overcommit updates must-fix.patch must fix lists update must fix list update mustfix update must-fix update mustfix lists arcnet-fixes.patch arcnet fixes x25-when-receiving-a-call-check-listening-sockets-for-matching-call-user-data.patch X.25: When receiving a call, check listening sockets for matching call user data. x25-remove-unused-header-files.patch X.25: Remove unused header files xircom_tulip_cb-build-fix.patch xircom_tulip_cb.c build fix ppc64-iseries-fix-viodasd-remove.patch ppc64 iSeries: fix viodasd remove ppc64-iseries-purr-emulation-fix.patch ppc64 iSeries: PURR emulation fix ppc64-reloc_hide.patch remove-unnecessary-inclusions-of-asm-aouth.patch Remove unnecessary inclusions of asm/a.out.h termio-userspace-access-error-handling.patch Termio userspace access error handling ide_arch_obsolete_init-fix.patch IDE_ARCH_OBSOLETE_INIT fix out-of-line-implementation-of-find_next_bit.patch out-of-line implementation of find_next_bit() gp-rel-data-support.patch GP-REL data support vm-routine-fixes.patch VM routine fixes vm-routine-fixes-CONFIG_SHMEM-fix.patch vm-routine-fixes CONFIG_SHMEM fix frv-fujitsu-fr-v-cpu-arch-maintainer-record.patch FRV: Fujitsu FR-V CPU arch maintainer record frv-fujitsu-fr-v-arch-documentation.patch FRV: Fujitsu FR-V arch documentation frv-fujitsu-fr-v-cpu-arch-implementation-part-1.patch FRV: Fujitsu FR-V CPU arch implementation part 1 frv-fujitsu-fr-v-cpu-arch-implementation-part-2.patch FRV: Fujitsu FR-V CPU arch implementation part 2 frv-fujitsu-fr-v-cpu-arch-implementation-part-3.patch FRV: Fujitsu FR-V CPU arch implementation part 3 frv-fujitsu-fr-v-cpu-arch-implementation-part-4.patch FRV: Fujitsu FR-V CPU arch implementation part 4 frv-fujitsu-fr-v-cpu-arch-implementation-part-5.patch FRV: Fujitsu FR-V CPU arch implementation part 5 frv-fujitsu-fr-v-cpu-arch-implementation-part-6.patch FRV: Fujitsu FR-V CPU arch implementation part 6 frv-fujitsu-fr-v-cpu-arch-implementation-part-7.patch FRV: Fujitsu FR-V CPU arch implementation part 7 frv-fujitsu-fr-v-cpu-arch-implementation-part-8.patch FRV: Fujitsu FR-V CPU arch implementation part 8 frv-fujitsu-fr-v-cpu-arch-implementation-part-9.patch FRV: Fujitsu FR-V CPU arch implementation part 9 frv-first-batch-of-fujitsu-fr-v-arch-include-files.patch FRV: First batch of Fujitsu FR-V arch include files frv-more-fujitsu-fr-v-arch-include-files.patch FRV: More Fujitsu FR-V arch include files frv-yet-more-fujitsu-fr-v-arch-include-files.patch FRV: Yet more Fujitsu FR-V arch include files frv-remaining-fujitsu-fr-v-arch-include-files.patch FRV: Remaining Fujitsu FR-V arch include files frv-make-calibrate_delay-optional.patch FRV: Make calibrate_delay() optional frv-better-mmap-support-in-uclinux.patch FRV: Better mmap support in uClinux frv-procfs-changes-for-nommu-changes.patch FRV: procfs changes for nommu changes frv-change-setup_arg_pages-to-take-stack-pointer.patch FRV: change setup_arg_pages() to take stack pointer frv-change-setup_arg_pages-to-take-stack-pointer-fixes.patch Fix usage of setup_arg_pages() in IA64, MIPS, S390 and Sparc64 frv-add-fdpic-elf-binary-format-driver.patch FRV: Add FDPIC ELF binary format driver superhyway-bus-support.patch SuperHyway bus support intel-thermal-monitor-for-x86_64.patch Intel thermal monitor for x86_64 s390-network-driver.patch s390: network driver enhanced-i-o-accounting-data-patch.patch enhanced I/O accounting data patch enhanced-memory-accounting-data-collection.patch enhanced Memory accounting data collection enhanced-memory-accounting-data-collection-tidy.patch enhanced-memory-accounting-data-collection-tidy wacom-tablet-driver.patch wacom tablet driver force-feedback-support-for-uinput.patch Force feedback support for uinput kmap_atomic-takes-char.patch kmap_atomic takes char* kmap_atomic-takes-char-fix.patch kmap_atomic-takes-char-fix kmap_atomic-fallout.patch kmap_atomic fallout kunmap-fallout-more-fixes.patch kunmap-fallout-more-fixes 4-4gb-incorrect-bound-check-in-do_getname.patch 4/4GB: Incorrect bound check in do_getname() handle-quoted-module-parameters.patch handle quoted module parameters CONFIG_SOUND_VIA82CXXX_PROCFS.patch Add CONFIG_SOUND_VIA82CXXX_PROCFS make-sysrq-f-call-oom_kill.patch make sysrq-F call oom_kill() allow-admin-to-enable-only-some-of-the-magic-sysrq-functions.patch Allow admin to enable only some of the Magic-Sysrq functions gen_init_cpio-symlink-pipe-socket-support.patch gen_init_cpio symlink, pipe and socket support gen_init_cpio-slink_pipe_sock_2.patch gen_init_cpio-slink_pipe_sock_2 move-irq_enter-and-irq_exit-to-common-code.patch move irq_enter and irq_exit to common code remove-unused-irq_cpustat-fields.patch remove unused irq_cpustat fields allow-nfs-exports-of-efs-filesystems.patch allow NFS exports of EFS filesystems selinux-scalability-add-spin_trylock_irq-and.patch SELinux scalability: add spin_trylock_irq and spin_trylock_irqsave selinux-scalability-convert-avc-to-rcu.patch SELinux scalability: convert AVC to RCU selinux-scalability-avc-statistics-and-tuning.patch SELinux scalability: AVC statistics and tuning oprofile-add-check_user_page_readable.patch oprofile: add check_user_page_readable() oprofile-arch-independent-code-for-stack-trace.patch oprofile: arch-independent code for stack trace sampling oprofile-arch-independent-code-for-stack-trace-rename-timer_init.patch oprofile-arch-independent-code-for-stack-trace: rename timer_init oprofile-i386-support-for-stack-trace-sampling.patch oprofile: i386 support for stack trace sampling oprofile-i386-support-for-stack-trace-sampling-fix.patch oprofile-i386-support-for-stack-trace-sampling x86_64 fix oprofile-i386-support-for-stack-trace-sampling-tidy.patch oprofile-i386-support-for-stack-trace-sampling tidy oprofile-ia64-support-for-oprofile-stack-trace.patch oprofile: ia64 support for oprofile stack trace sampling oprofile-update-alpha-for-api-changes.patch oprofile: update alpha for api changes oprofile-update-arm-for-api-changes.patch oprofile: update arm for api changes oprofile-update-ppc-for-api-changes.patch oprofile: update ppc for api changes oprofile-update-parisc-for-api-changes.patch oprofile: update parisc for api changes oprofile-update-s390-for-api-changes.patch oprofile: update s390 for api changes oprofile-update-sh-for-api-changes.patch oprofile: update sh for api changes oprofile-update-sparc64-for-api-changes.patch oprofile: update sparc64 for api changes pcmcia-b17-device-model-integration.patch pcmcia-b18a-client_t-and-pcmcia_device-integration.patch pcmcia-b18b-error-on-leftover-devices.patch pcmcia-b19-netdevice-integration.patch knfsd-nfsd_translate_wouldblocks.patch knfsd: nfsd_translate_wouldblocks knfsd-svcrpc-fqdn-length-fix.patch knfsd: svcrpc: fqdn length fix knfsd-svcrpc-auth_null-fixes.patch knfsd: svcrpc: auth_null fixes knfsd-svcrpc-share-code-duplicated-between-auth_unix-and-auth_null.patch knfsd: svcrpc: share code duplicated between auth_unix and auth_null knfsd-nfsd4-fix-open_downgrade-decode-error.patch knfsd: nfsd4: fix open_downgrade decode error. knfsd-rpcsec_gss-comparing-pointer-to-0-instead-of-null.patch knfsd: rpcsec_gss: comparing pointer to 0 instead of NULL knfsd-nfsd4-fix-fileid-in-readdir-responses.patch knfsd: nfsd4: fix fileid in readdir responses knfsd-nfsd4-use-the-fsid-export-option-when-returning-the-fsid-attribute.patch knfsd: nfsd4: use the fsid export option when returning the fsid attribute knfsd-nfsd4-encode_dirent-cleanup.patch knfsd: nfsd4 encode_dirent cleanup knfsd-nfsd4-encode_dirent-superfluous-assignment.patch knfsd: nfsd4: encode_dirent: superfluous assignment knfsd-nfsd4-encode_dirent-superfluous-local-variables.patch knfsd: nfsd4: encode_dirent: superfluous local variables knfsd-nfsd4-encode_dirent-more-readdir-attribute-encoding-to-new-function.patch knfsd: nfsd4: encode_dirent: more readdir attribute encoding to new function knfsd-nfsd4-encode_dirent-simplify-nfs4_encode_dirent_fattr.patch knfsd: nfsd4: encode_dirent: simplify nfs4_encode_dirent_fattr knfsd-nfsd4-encode_dirent-move-rdattr_error-code-to-new-function.patch knfsd: nfsd4: encode_dirent: move rdattr_error code to new function knfsd-nfsd4-encode_dirent-simplify-error-handling.patch knfsd: nfsd4: encode_dirent: simplify error handling knfsd-nfsd4-encode_dirent-simplify-control-flow.patch knfsd: nfsd4: encode_dirent: simplify control flow knfsd-nfsd4-encode_dirent-fix-dropit-return.patch knfsd: nfsd4: encode_dirent: fix dropit return knfsd-nfsd4-encode_dirent-trivial-cleanup.patch knfsd: nfsd4: encode_dirent: trivial cleanup kgdb-ga.patch kgdb stub for ia32 (George Anzinger's one) kgdbL warning fix kgdb buffer overflow fix kgdbL warning fix kgdb: CONFIG_DEBUG_INFO fix x86_64 fixes correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2) kgdb: fix for recent gcc kgdb warning fixes THREAD_SIZE fixes for kgdb Fix stack overflow test for non-8k stacks kgdb-ga.patch fix for i386 single-step into sysenter fix TRAP_BAD_SYSCALL_EXITS on i386 add TRAP_BAD_SYSCALL_EXITS config for i386 kgdb-is-incompatible-with-kprobes kgdb-ga-build-fix kgdb-ga-fixes kgdboe-netpoll.patch kgdb-over-ethernet via netpoll kgdboe: fix configuration of MAC address kgdb-x86_64-support.patch kgdb-x86_64-support.patch for 2.6.2-rc1-mm3 kgdb-x86_64-warning-fixes kgdb-x86_64-fix kgdb-x86_64-serial-fix kprobes exception notifier fix kgdb-ia64-support.patch IA64 kgdb support ia64 kgdb repair and cleanup ia64 kgdb fix kgdb: ia64 fixes invalidate_inodes-speedup.patch invalidate_inodes speedup more invalidate_inodes speedup fixes dev-mem-restriction-patch.patch /dev/mem restriction patch dev-mem-restriction-patch-allow-reads.patch dev-mem-restriction-patch: allow reads jbd-remove-livelock-avoidance.patch JBD: remove livelock avoidance code in journal_dirty_data() journal_add_journal_head-debug.patch journal_add_journal_head-debug list_del-debug.patch list_del debug check unplug-can-sleep.patch unplug functions can sleep firestream-warnings.patch firestream warnings perfctr-core.patch perfctr: core perfctr-i386.patch perfctr: i386 perfctr-x86-core-updates.patch perfctr x86 core updates perfctr-x86-driver-updates.patch perfctr x86 driver updates perfctr-x86-driver-cleanup.patch perfctr: x86 driver cleanup perfctr-prescott-fix.patch Prescott fix for perfctr perfctr-x86_64.patch perfctr: x86_64 perfctr-x86_64-core-updates.patch perfctr x86_64 core updates perfctr-ppc.patch perfctr: PowerPC perfctr-ppc32-driver-update.patch perfctr: ppc32 driver update perfctr-ppc32-mmcr0-handling-fixes.patch perfctr ppc32 MMCR0 handling fixes perfctr-virtualised-counters.patch perfctr: virtualised counters perfctr-remap_page_range-fix.patch virtual-perfctr-illegal-sleep.patch virtual perfctr illegal sleep make-perfctr_virtual-default-in-kconfig-match-recommendation.patch Make PERFCTR_VIRTUAL default in Kconfig match recommendation in help text perfctr-ifdef-cleanup.patch perfctr ifdef cleanup perfctr-update-2-6-kconfig-related-updates.patch perfctr: Kconfig-related updates perfctr-virtual-updates.patch perfctr virtual updates perfctr-virtual-cleanup.patch perfctr: virtual cleanup perfctr-ppc32-preliminary-interrupt-support.patch perfctr ppc32 preliminary interrupt support perfctr-update-5-6-reduce-stack-usage.patch perfctr: reduce stack usage perfctr-interrupt-support-kconfig-fix.patch perfctr interrupt_support Kconfig fix perfctr-low-level-documentation.patch perfctr low-level documentation perfctr-inheritance-1-3-driver-updates.patch perfctr inheritance: driver updates perfctr-inheritance-2-3-kernel-updates.patch perfctr inheritance: kernel updates perfctr-inheritance-3-3-documentation-updates.patch perfctr inheritance: documentation updates perfctr-inheritance-locking-fix.patch perfctr inheritance locking fix perfctr-api-changes-first-step.patch perfctr API changes: first step perfctr-x86-64-ia32-emulation-fix.patch perfctr x86-64 ia32 emulation fix perfctr-ppc32-update.patch perfctr ppc32 update sched-more-agressive-wake_idle.patch sched: more agressive wake_idle() sched-can_migrate-exception-for-idle-cpus.patch sched: can_migrate exception for idle cpus sched-newidle-fix.patch sched: newidle fix sched-active_load_balance-fixlet.patch sched: active_load_balance() fixlet sched-reset-cache_hot_time.patch sched: reset cache_hot_time schedc-whitespace-mangler.patch sched.c whitespace mangler sched-alter_kthread_prio.patch sched: alter_kthread_prio sched-adjust_timeslice_granularity.patch sched: adjust_timeslice_granularity sched-add_requeue_task.patch sched: add_requeue_task requeue_granularity.patch sched: requeue_granularity sched-remove_interactive_credit.patch sched: remove_interactive_credit sched-use-cached-current-value.patch sched: use cached current value dont-hide-thread_group_leader-from-grep.patch don't hide thread_group_leader() from grep add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch Add do_proc_doulonglongvec_minmax to sysctl functions add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix add-do_proc_doulonglongvec_minmax-to-sysctl-functions fix 2 add-sysctl-interface-to-sched_domain-parameters.patch Add sysctl interface to sched_domain parameters preempt-smp.patch improve preemption on SMP preempt-smp-_raw_read_trylock-bias-fix.patch preempt-smp _raw_read_trylock bias fix preempt-cleanup.patch preempt cleanup preempt-cleanup-fix.patch preempt-cleanup-fix add-lock_need_resched.patch add lock_need_resched() sched-add-cond_resched_softirq.patch sched: add cond_resched_softirq() sched-ext3-fix-scheduling-latencies-in-ext3.patch sched: ext3: fix scheduling latencies in ext3 break-latency-in-invalidate_list.patch break latency in invalidate_list() sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent.patch sched: vfs: fix scheduling latencies in prune_dcache() and select_parent() sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent-fix.patch sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent fix sched-net-fix-scheduling-latencies-in-netstat.patch sched: net: fix scheduling latencies in netstat sched-net-fix-scheduling-latencies-in-__release_sock.patch sched: net: fix scheduling latencies in __release_sock sched-mm-fix-scheduling-latencies-in-unmap_vmas.patch sched: mm: fix scheduling latencies in unmap_vmas() sched-mm-fix-scheduling-latencies-in-get_user_pages.patch sched: mm: fix scheduling latencies in get_user_pages() sched-mm-fix-scheduling-latencies-in-filemap_sync.patch sched: mm: fix scheduling latencies in filemap_sync() fix-keventd-execution-dependency.patch fix keventd execution dependency sched-fix-scheduling-latencies-in-mttrc.patch sched: fix scheduling latencies in mttr.c sched-fix-scheduling-latencies-in-vgaconc.patch sched: fix scheduling latencies in vgacon.c sched-fix-scheduling-latencies-for-preempt-kernels.patch sched: fix scheduling latencies for !PREEMPT kernels idle-thread-preemption-fix.patch idle thread preemption fix oprofile-smp_processor_id-fixes.patch oprofile smp_processor_id() fixes fix-smp_processor_id-warning-in-numa_node_id.patch Fix smp_processor_id() warning in numa_node_id() vmtrunc-truncate_count-not-atomic.patch vmtrunc: truncate_count not atomic vmtrunc-restore-unmap_vmas-zap_bytes.patch vmtrunc: restore unmap_vmas zap_bytes vmtrunc-unmap_mapping_range_tree.patch vmtrunc: unmap_mapping_range_tree vmtrunc-unmap_mapping-dropping-i_mmap_lock.patch vmtrunc: unmap_mapping dropping i_mmap_lock vmtrunc-vm_truncate_count-race-caution.patch vmtrunc: vm_truncate_count race caution vmtrunc-bug-if-page_mapped.patch vmtrunc: bug if page_mapped vmtrunc-restart_addr-in-truncate_count.patch vmtrunc: restart_addr in truncate_count remove-the-bkl-by-turning-it-into-a-semaphore.patch remove the BKL by turning it into a semaphore cpu_down-warning-fix.patch cpu_down() warning fix linux-2.6.8.1-49-rpc_workqueue.patch nfs: RPC: Convert rpciod into a work queue for greater flexibility linux-2.6.8.1-50-rpc_queue_lock.patch nfs: RPC: Remove the rpc_queue_lock global spinlock allow-modular-ide-pnp.patch allow modular ide-pnp allow-x86_64-to-reenable-interrupts-on-contention.patch Allow x86_64 to reenable interrupts on contention i386-cpu-hotplug-updated-for-mm.patch i386 CPU hotplug updated for -mm serialize-access-to-ide-devices.patch serialize access to ide devices disable-atykb-warning.patch disable atykb "too many keys pressed" warning export-file_ra_state_init-again.patch Export file_ra_state_init() again cachefs-filesystem.patch CacheFS filesystem numa-policies-for-file-mappings-mpol_mf_move-cachefs.patch numa-policies-for-file-mappings-mpol_mf_move for cachefs cachefs-release-search-records-lest-they-return-to-haunt-us.patch CacheFS: release search records lest they return to haunt us fix-64-bit-problems-in-cachefs.patch Fix 64-bit problems in cachefs cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch cachefs: fixed typos that cause wrong pointer to be kunmapped cachefs-return-the-right-error-upon-invalid-mount.patch CacheFS: return the right error upon invalid mount fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch Fix CacheFS barrier handling and other kernel discrepancies remove-error-from-linux-cachefsh.patch Remove #error from linux/cachefs.h cachefs-warning-fix-2.patch cachefs warning fix 2 cachefs-linkage-fix-2.patch cachefs linkage fix cachefs-build-fix.patch cachefs build fix cachefs-documentation.patch CacheFS documentation add-page-becoming-writable-notification.patch Add page becoming writable notification provide-a-filesystem-specific-syncable-page-bit.patch Provide a filesystem-specific sync'able page bit provide-a-filesystem-specific-syncable-page-bit-fix.patch provide-a-filesystem-specific-syncable-page-bit-fix provide-a-filesystem-specific-syncable-page-bit-fix-2.patch provide-a-filesystem-specific-syncable-page-bit-fix-2 make-afs-use-cachefs.patch Make AFS use CacheFS afs-cachefs-dependency-fix.patch afs-cachefs-dependency-fix split-general-cache-manager-from-cachefs.patch Split general cache manager from CacheFS turn-cachefs-into-a-cache-backend.patch Turn CacheFS into a cache backend rework-the-cachefs-documentation-to-reflect-fs-cache-split.patch Rework the CacheFS documentation to reflect FS-Cache split update-afs-client-to-reflect-cachefs-split.patch Update AFS client to reflect CacheFS split assign_irq_vector-section-fix.patch assign_irq_vector __init section fix kexec-i8259-shutdowni386.patch kexec: i8259-shutdown.i386 kexec-i8259-shutdown-x86_64.patch kexec: x86_64 i8259 shutdown kexec-apic-virtwire-on-shutdowni386patch.patch kexec: apic-virtwire-on-shutdown.i386.patch kexec-apic-virtwire-on-shutdownx86_64.patch kexec: apic-virtwire-on-shutdown.x86_64 kexec-ioapic-virtwire-on-shutdowni386.patch kexec: ioapic-virtwire-on-shutdown.i386 kexec-ioapic-virtwire-on-shutdownx86_64.patch kexec: ioapic-virtwire-on-shutdown.x86_64 kexec-e820-64bit.patch kexec: e820-64bit kexec-kexec-generic.patch kexec: kexec-generic kexec-ide-spindown-fix.patch kexec-ide-spindown-fix kexec-ifdef-cleanup.patch kexec ifdef cleanup kexec-machine_shutdownx86_64.patch kexec: machine_shutdown.x86_64 kexec-kexecx86_64.patch kexec: kexec.x86_64 kexec-kexecx86_64-4level-fix.patch kexec-kexecx86_64-4level-fix kexec-machine_shutdowni386.patch kexec: machine_shutdown.i386 kexec-kexeci386.patch kexec: kexec.i386 kexec-use_mm.patch kexec: use_mm kexec-loading-kernel-from-non-default-offset.patch kexec: loading kernel from non-default offset kexec-loading-kernel-from-non-default-offset-fix.patch kdump: fix bss compile error kexec-enabling-co-existence-of-normal-kexec-kernel-and-panic-kernel.patch kexec: nabling co-existence of normal kexec kernel and panic kernel crashdump-documentation.patch crashdump: documentation crashdump-memory-preserving-reboot-using-kexec.patch crashdump: memory preserving reboot using kexec crashdump-routines-for-copying-dump-pages.patch crashdump: routines for copying dump pages crashdump-routines-for-copying-dump-pages-kmap-fiddle.patch crashdump-routines-for-copying-dump-pages-kmap-fiddle crashdump-kmap-build-fix.patch crashdump kmap build fix crashdump-register-snapshotting-before-kexec-boot.patch crashdump: register snapshotting before kexec boot crashdump-elf-format-dump-file-access.patch crashdump: ELF format dump file access crashdump-linear-raw-format-dump-file-access.patch crashdump: linear/raw format dump file access crashdump-minor-bug-fixes-to-kexec-crashdump-code.patch crashdump: minor bug fixes to kexec crashdump code crashdump-cleanups-to-the-kexec-based-crashdump-code.patch crashdump: cleanups to the kexec based crashdump code x86-rename-apic_mode_exint.patch x86: rename APIC_MODE_EXINT x86-local-apic-fix.patch x86: local apic fix new-bitmap-list-format-for-cpusets.patch new bitmap list format (for cpusets) cpusets-big-numa-cpu-and-memory-placement.patch cpusets - big numa cpu and memory placement cpusets-fix-cpuset_get_dentry.patch cpusets : fix cpuset_get_dentry() cpusets-fix-race-in-cpuset_add_file.patch cpusets: fix race in cpuset_add_file() cpusets-remove-more-casts.patch cpusets: remove more casts cpusets-make-config_cpusets-the-default-in-sn2_defconfig.patch cpusets: make CONFIG_CPUSETS the default in sn2_defconfig cpusets-document-proc-status-allowed-fields.patch cpusets: document proc status allowed fields cpusets-dont-export-proc_cpuset_operations.patch Cpusets - Dont export proc_cpuset_operations cpusets-display-allowed-masks-in-proc-status.patch cpusets: display allowed masks in proc status cpusets-simplify-cpus_allowed-setting-in-attach.patch cpusets: simplify cpus_allowed setting in attach cpusets-remove-useless-validation-check.patch cpusets: remove useless validation check cpusets-config_cpusets-depends-on-smp.patch Cpusets: CONFIG_CPUSETS depends on SMP cpusets-tasks-file-simplify-format-fixes.patch Cpusets tasks file: simplify format, fixes cpusets-simplify-memory-generation.patch Cpusets: simplify memory generation cpusets-interoperate-with-hotplug-online-maps.patch cpusets: interoperate with hotplug online maps cpusets-alternative-fix-for-possible-race-in.patch cpusets: alternative fix for possible race in cpuset_tasks_read() cpusets-remove-casts.patch cpusets: remove void* typecasts reiser4-sb_sync_inodes.patch reiser4: vfs: add super_operations.sync_inodes() reiser4-allow-drop_inode-implementation.patch reiser4: export vfs inode.c symbols reiser4-truncate_inode_pages_range.patch reiser4: vfs: add truncate_inode_pages_range() reiser4-export-remove_from_page_cache.patch reiser4: export pagecache add/remove functions to modules reiser4-export-page_cache_readahead.patch reiser4: export page_cache_readahead to modules reiser4-reget-page-mapping.patch reiser4: vfs: re-check page->mapping after calling try_to_release_page() reiser4-rcu-barrier.patch reiser4: add rcu_barrier() synchronization point reiser4-export-inode_lock.patch reiser4: export inode_lock to modules reiser4-export-pagevec-funcs.patch reiser4: export pagevec functions to modules reiser4-export-radix_tree_preload.patch reiser4: export radix_tree_preload() to modules reiser4-radix-tree-tag.patch reiser4: add new radix tree tag reiser4-radix_tree_lookup_slot.patch reiser4: add radix_tree_lookup_slot() reiser4-aliased-dir.patch reiser4: vfs: handle aliased directories reiser4-kobject-umount-race.patch reiser4: introduce filesystem kobjects reiser4-kobject-umount-race-cleanup.patch reiser4-kobject-umount-race-cleanup reiser4-perthread-pages.patch reiser4: per-thread page pools reiser4-unstatic-kswapd.patch reiser4: make kswapd() unstatic for debug reiser4-include-reiser4.patch reiser4: add to build system reiser4-doc.patch reiser4: documentation reiser4-only.patch reiser4: main fs reiser4-crypto-update.patch reiser4-crypto-update reiser4-max_cbk_iteration-fix.patch reiser4-max_cbk_iteration-fix reiser4-reduce-stack-usage.patch reiser4-reduce-stack-usage reiser4-fix-deadlock.patch reiser4-fix-deadlock reiser4-dont-use-shrink_dcache_anon.patch reiser4-dont-use-shrink_dcache_anon reiser4-kmap-atomic-fixes.patch reiser4 kmap_atomic fixes add-acpi-based-floppy-controller-enumeration.patch Add ACPI-based floppy controller enumeration. possible-dcache-bug-debugging-patch.patch Possible dcache BUG: debugging patch 3c59x-pm-fix.patch 3c59x: enable power management unconditionally 3c59x-missing-pci_disable_device.patch 3c59x: missing pci_disable_device 3c59x-use-netdev_priv.patch 3c59x: use netdev_priv 3c59x-make-use-of-generic_mii_ioctl.patch 3c59x: Make use of generic_mii_ioctl 3c59x-vortex-select-mii.patch 3c59x: VORTEX select MII 3c59x-reload-eeprom-values-at-rmmod-for-needy-cards.patch 3c59x: reload EEPROM values at rmmod for needy cards 3c59x-remove-eeprom_reset-for-3c905b.patch 3c59x: remove EEPROM_RESET for 3c905B 3c59x-support-more-ethtool_ops.patch 3c59x: support more ethtool_ops serial-add-support-for-non-standard-xtals-to-16c950-driver.patch serial: add support for non-standard XTALs to 16c950 driver add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch Add support for Possio GCC AKA PCMCIA Siemens MC45 new-serial-flow-control.patch new serial flow control early-uart-console-support.patch early uart console support mpsc-driver-patch.patch serial: MPSC driver vm-pageout-throttling.patch vm: pageout throttling revert-allow-oem-written-modules-to-make-calls-to-ia64-oem-sal-functions.patch revert "allow OEM written modules to make calls to ia64 OEM SAL functions" md-fix-problem-with-unsigned-variable-going-negative-in-linearc.patch md: Fix problem with unsigned variable going "negative" in linear.c md-improve-hash-code-in-linearc.patch md: improve 'hash' code in linear.c md-add-interface-for-userspace-monitoring-of-events.patch md: add interface for userspace monitoring of events. fix-for-spurious-interrupts-on-e100-resume-2.patch Fix for spurious interrupts on e100 resume 2 make-acpi_bus_register_driver-consistent-with-pci_register_driver-again.patch make acpi_bus_register_driver() consistent with pci_register_driver() enforce-a-gap-between-heap-and-stack.patch Enforce a gap between heap and stack remove-lock_section-from-x86_64-spin_lock-asm.patch remove LOCK_SECTION from x86_64 spin_lock asm kfree_skb-dump_stack.patch kfree_skb-dump_stack for-mm-only-remove-remap_page_range-completely.patch vm: for -mm only: remove remap_page_range() completely cancel_rearming_delayed_work.patch cancel_rearming_delayed_work() make-cancel_rearming_delayed_workqueue-static.patch make cancel_rearming_delayed_workqueue static ipvs-deadlock-fix.patch ipvs deadlock fix minimal-ide-disk-updates.patch Minimal ide-disk updates no-buddy-bitmap-patch-revist-intro-and-includes.patch no buddy bitmap patch revist: intro and includes no-buddy-bitmap-patch-revisit-for-mm-page_allocc.patch no buddy bitmap patch revisit: for mm/page_alloc.c no-buddy-bitmap-patch-revisit-for-mm-page_allocc-fix.patch no-buddy-bitmap-patch-revisit-for-mm-page_allocc fix no-buddy-bitmap-patch-revist-for-ia64.patch no buddy bitmap patch revist: for ia64 no-buddy-bitmap-patch-revist-for-ia64-fix.patch no-buddy-bitmap-patch-revist-for-ia64 fix use-find_trylock_page-in-free_swap_and_cache-instead-of-hand-coding.patch use find_trylock_page in free_swap_and_cache instead of hand coding figure-out-who-is-inserting-bogus-modules.patch Figure out who is inserting bogus modules use-mmiowb-in-qla1280c.patch use mmiowb in qla1280.c readpage-vs-invalidate-fix.patch readpage-vs-invalidate fix invalidate_inode_pages-mmap-coherency-fix.patch invalidate_inode_pages2() mmap coherency fix yenta_socketc-fix-missing-pci_disable_dev.patch yenta_socket.c: Fix missing pci_disable_dev yenta-dont-enable-read-prefetch-on-older-o2-bridges.patch yenta: don't enable read prefetch on older o2 bridges. cputime-introduce-cputime.patch cputime: introduce cputime cputime-fix-do_setitimer.patch cputime: fix do_setitimer. cputime-missing-pieces.patch cputime: missing pieces. mm-check_rlimit-oops-on-p-signal.patch check_rlimit oops on p->signal cputime-microsecond-based-cputime-for-s390.patch cputime: microsecond based cputime for s390 detect-atomic-counter-underflows.patch detect atomic counter underflows lock-initializer-unifying-batch-2-alpha.patch Lock initializer unifying: ALPHA lock-initializer-unifying-batch-2-ia64.patch Lock initializer unifying: IA64 lock-initializer-unifying-batch-2-m32r.patch Lock initializer unifying: M32R lock-initializer-unifying-batch-2-mips.patch Lock initializer unifying: MIPS lock-initializer-unifying-batch-2-misc-drivers.patch Lock initializer unifying: Misc drivers lock-initializer-unifying-batch-2-block-devices.patch Lock initializer unifying: Block devices lock-initializer-unifying-batch-2-drm.patch Lock initializer unifying: DRM lock-initializer-unifying-batch-2-character-devices.patch Lock initializer unifying: character devices lock-initializer-unifying-batch-2-rio.patch Lock initializer unifying: RIO lock-initializer-unifying-batch-2-firewire.patch Lock initializer unifying: Firewire lock-initializer-unifying-batch-2-isdn.patch Lock initializer unifying: ISDN lock-initializer-unifying-batch-2-raid.patch Lock initializer unifying: Raid lock-initializer-unifying-batch-2-media-drivers.patch Lock initializer unifying: media drivers lock-initializer-unifying-batch-2-scsi.patch Lock initializer unifying: SCSI lock-initializer-unifying-batch-2-drivers-serial.patch Lock initializer unifying: drivers/serial lock-initializer-unifying-batch-2-filesystems.patch Lock initializer unifying: Filesystems lock-initializer-unifying-batch-2-video.patch Lock initializer unifying: Video lock-initializer-unifying-batch-2-sound.patch Lock initializer unifying: sound lock-initializer-cleanup-common-headers.patch Lock initializer cleanup (common headers) lock-initializer-cleanup-character-devices.patch Lock initializer cleanup (character devices) lock-initializer-cleanup-core.patch Lock initializer cleanup (Core) eth1394-module_parm-conversion.patch eth1394 MODULE_PARM conversion tvaudio-and-tvmixer-module_param-conversion.patch tvaudio and tvmixer module_param conversion isapnp-module_param-conversion.patch isapnp module_param conversion parport-module_param-conversion.patch parport module_param conversion sr-module_param-conversion.patch sr module_param conversion media-video-module_param-conversion.patch media/video module_param conversion btaudio-module_param-conversion.patch btaudio module_param conversion ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 - SELinux atomic_dec_and_test() bug 2004-11-16 9:42 2.6.10-rc2-mm1 Andrew Morton @ 2004-11-16 16:48 ` James Morris 2004-11-16 21:30 ` 2.6.10-rc2-mm1 Lee Revell ` (4 subsequent siblings) 5 siblings, 0 replies; 23+ messages in thread From: James Morris @ 2004-11-16 16:48 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel, Stephen Smalley, Kaigai Kohei Atomic underflow debugging in this kernel exposed a bug in the AVC RCU code, fix below. The effect of this bug would be delayed node reclamation. Signed-off-by: James Morris <jmorris@redhat.com> --- diff -purN -X dontdiff linux-2.6.10-rc2-mm1.o/security/selinux/avc.c linux-2.6.10-rc2-mm1.w/security/selinux/avc.c --- linux-2.6.10-rc2-mm1.o/security/selinux/avc.c 2004-11-16 10:57:16.000000000 -0500 +++ linux-2.6.10-rc2-mm1.w/security/selinux/avc.c 2004-11-16 11:27:19.000000000 -0500 @@ -269,7 +269,7 @@ static inline int avc_reclaim_node(void) continue; list_for_each_entry(node, &avc_cache.slots[hvalue], list) { - if (!atomic_dec_and_test(&node->ae.used)) { + if (atomic_dec_and_test(&node->ae.used)) { /* Recently Unused */ avc_node_delete(node); avc_cache_stats_incr(reclaims); ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-16 9:42 2.6.10-rc2-mm1 Andrew Morton 2004-11-16 16:48 ` 2.6.10-rc2-mm1 - SELinux atomic_dec_and_test() bug James Morris @ 2004-11-16 21:30 ` Lee Revell 2004-11-17 2:22 ` 2.6.10-rc2-mm1 Andrew Morton 2004-11-16 21:38 ` 2.6.10-rc2-mm1 Lee Revell ` (3 subsequent siblings) 5 siblings, 1 reply; 23+ messages in thread From: Lee Revell @ 2004-11-16 21:30 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel On Tue, 2004-11-16 at 01:42 -0800, Andrew Morton wrote: > http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.10-rc2-mm1.gz > Why was the VIA DRM removed? It was in 2.6.9-mm1 but seems to be gone now. Lee ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-16 21:30 ` 2.6.10-rc2-mm1 Lee Revell @ 2004-11-17 2:22 ` Andrew Morton 2004-11-17 2:28 ` 2.6.10-rc2-mm1 Lee Revell 2004-11-17 3:21 ` 2.6.10-rc2-mm1 Dave Airlie 0 siblings, 2 replies; 23+ messages in thread From: Andrew Morton @ 2004-11-17 2:22 UTC (permalink / raw) To: Lee Revell; +Cc: linux-kernel Lee Revell <rlrevell@joe-job.com> wrote: > > On Tue, 2004-11-16 at 01:42 -0800, Andrew Morton wrote: > > http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.10-rc2-mm1.gz > > > > Why was the VIA DRM removed? It was in 2.6.9-mm1 but seems to be gone > now. Actually I haven't been updating that for a while, because of ghastly conflicts upstream. Then it disappeared altogether due to administrative error. I'll see if I can resurrect it. ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-17 2:22 ` 2.6.10-rc2-mm1 Andrew Morton @ 2004-11-17 2:28 ` Lee Revell 2004-11-17 3:21 ` 2.6.10-rc2-mm1 Dave Airlie 1 sibling, 0 replies; 23+ messages in thread From: Lee Revell @ 2004-11-17 2:28 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel On Tue, 2004-11-16 at 18:22 -0800, Andrew Morton wrote: > Lee Revell <rlrevell@joe-job.com> wrote: > > > > On Tue, 2004-11-16 at 01:42 -0800, Andrew Morton wrote: > > > http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.10-rc2-mm1.gz > > > > > > > Why was the VIA DRM removed? It was in 2.6.9-mm1 but seems to be gone > > now. > > Actually I haven't been updating that for a while, because of ghastly > conflicts upstream. Then it disappeared altogether due to administrative > error. > > I'll see if I can resurrect it. OK thanks. Not many people use the 3D but there are now Xine and mplayer plugins that use the DRI for hardware accelerated playback on this chip. Lee ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-17 2:22 ` 2.6.10-rc2-mm1 Andrew Morton 2004-11-17 2:28 ` 2.6.10-rc2-mm1 Lee Revell @ 2004-11-17 3:21 ` Dave Airlie 2004-11-17 3:23 ` 2.6.10-rc2-mm1 Lee Revell 1 sibling, 1 reply; 23+ messages in thread From: Dave Airlie @ 2004-11-17 3:21 UTC (permalink / raw) To: Andrew Morton; +Cc: Lee Revell, linux-kernel (sorry Andrew for the DUP- I'm still learning how to drive gmail :-) > > Why was the VIA DRM removed? It was in 2.6.9-mm1 but seems to be gone > > now. > I asked Andrew to kill it, I wasn't happy with it security wise still, resurrecting it could be messy as the tree isn't converted over to the core/library split, I'll probably pick it back up once Linus merges the current diffs after 2.6.10 is released... VIA DRM still only is useful for 2D HwMC stuff for non-root users, having to make a user run 3d apps as root is probably worse than having an in-secure DRM, so I'm still waiting for the VIA/unichrome people to see what they can do with it... Dave. ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-17 3:21 ` 2.6.10-rc2-mm1 Dave Airlie @ 2004-11-17 3:23 ` Lee Revell 2004-11-17 22:08 ` 2.6.10-rc2-mm1 Dave Airlie 0 siblings, 1 reply; 23+ messages in thread From: Lee Revell @ 2004-11-17 3:23 UTC (permalink / raw) To: Dave Airlie; +Cc: Andrew Morton, linux-kernel On Wed, 2004-11-17 at 14:21 +1100, Dave Airlie wrote: > VIA DRM still only is > useful for 2D HwMC stuff for non-root users, having to make a user run > 3d apps as root is probably worse than having an in-secure DRM, so I'm > still waiting for the VIA/unichrome people to see what they can do > with it... See my previous mail; FWIW almost no one uses the DRM for 3D on this card. Many people do use the 2D HwMC stuff though. Maybe this is not a big deal... Lee ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-17 3:23 ` 2.6.10-rc2-mm1 Lee Revell @ 2004-11-17 22:08 ` Dave Airlie 0 siblings, 0 replies; 23+ messages in thread From: Dave Airlie @ 2004-11-17 22:08 UTC (permalink / raw) To: Lee Revell; +Cc: Andrew Morton, linux-kernel > > See my previous mail; FWIW almost no one uses the DRM for 3D on this > card. Many people do use the 2D HwMC stuff though. Maybe this is not a > big deal... > I might merge up a DRM with the 3D part disabled, so the 2D stuff works after 2.6.10 comes out, Alan wanted me to merge up all the outstanding drms that have security issues and disable them for non-root but someone pointed out the issues with making people run untrusted things as root to be able to use them at all... Dave. ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-16 9:42 2.6.10-rc2-mm1 Andrew Morton 2004-11-16 16:48 ` 2.6.10-rc2-mm1 - SELinux atomic_dec_and_test() bug James Morris 2004-11-16 21:30 ` 2.6.10-rc2-mm1 Lee Revell @ 2004-11-16 21:38 ` Lee Revell 2004-11-17 11:04 ` 2.6.10-rc2-mm1 (8139too interrupt) Ralf Gerbig ` (2 subsequent siblings) 5 siblings, 0 replies; 23+ messages in thread From: Lee Revell @ 2004-11-16 21:38 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel, Jack O'Quin On Tue, 2004-11-16 at 01:42 -0800, Andrew Morton wrote: > http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.10-rc2-mm1.gz > I would like to request that the realtime LSM be included in the next -mm release. Here is the current patch: http://lkml.org/lkml/diff/2004/11/9/288/1 Here is Jack's announcement: http://lkml.org/lkml/2004/11/9/288 No objections were raised to the patch in its current form. This applies cleanly against 2.6.10-rc2-mm1. The short version of what it does is "enables selected non-root users to run RT apps (ie use SCHED_FIFO and mlock)". Lee ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 (8139too interrupt) 2004-11-16 9:42 2.6.10-rc2-mm1 Andrew Morton ` (2 preceding siblings ...) 2004-11-16 21:38 ` 2.6.10-rc2-mm1 Lee Revell @ 2004-11-17 11:04 ` Ralf Gerbig 2004-11-17 19:06 ` Andrew Morton 2004-11-17 11:32 ` 2.6.10-rc2-mm1 William Lee Irwin III 2004-11-17 20:53 ` 2.6.10-rc2-mm1 Grzegorz Piotr Jaskiewicz 5 siblings, 1 reply; 23+ messages in thread From: Ralf Gerbig @ 2004-11-17 11:04 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel Hi Andrew, just found this: 0000:01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:01:0b.0 Class 0200: 10ec:8139 (rev 10) 19: 12248 IO-APIC-level ide2, ide3, eth1 irq 19: nobody cared! [__report_bad_irq+42/144] __report_bad_irq+0x2a/0x90 [<c01388ea>] __report_bad_irq+0x2a/0x90 [handle_IRQ_event+57/112] handle_IRQ_event+0x39/0x70 [<c01381a9>] handle_IRQ_event+0x39/0x70 [note_interrupt+149/192] note_interrupt+0x95/0xc0 [<c0138a05>] note_interrupt+0x95/0xc0 [__do_IRQ+357/384] __do_IRQ+0x165/0x180 [<c0138345>] __do_IRQ+0x165/0x180 [do_IRQ+71/112] do_IRQ+0x47/0x70 [<c0105907>] do_IRQ+0x47/0x70 ======================= [common_interrupt+26/32] common_interrupt+0x1a/0x20 [<c0103c52>] common_interrupt+0x1a/0x20 [default_idle+0/48] default_idle+0x0/0x30 [<c0101030>] default_idle+0x0/0x30 [default_idle+35/48] default_idle+0x23/0x30 [<c0101053>] default_idle+0x23/0x30 [cpu_idle+54/112] cpu_idle+0x36/0x70 [<c01010d6>] cpu_idle+0x36/0x70 [start_kernel+346/384] start_kernel+0x15a/0x180 [<c042180a>] start_kernel+0x15a/0x180 [unknown_bootoption+0/480] unknown_bootoption+0x0/0x1e0 [<c0421380>] unknown_bootoption+0x0/0x1e0 handlers: [ide_intr+0/496] (ide_intr+0x0/0x1f0) [<c0269c80>] (ide_intr+0x0/0x1f0) [ide_intr+0/496] (ide_intr+0x0/0x1f0) [<c0269c80>] (ide_intr+0x0/0x1f0) [pg0+541642080/1068946432] (rtl8139_interrupt+0x0/0x1d0 [8139too]) [<e091dd60>] (rtl8139_interrupt+0x0/0x1d0 [8139too]) Disabling IRQ #19 NETDEV WATCHDOG: eth1: transmit timed out eth1: Transmit timeout, status 0c 0005 c07f media 18. eth1: Tx queue start entry 63 dirty entry 59. eth1: Tx descriptor 0 is 0008a03c. eth1: Tx descriptor 1 is 0008a06a. eth1: Tx descriptor 2 is 0008a03c. eth1: Tx descriptor 3 is 0008a03c. (queue head) eth1: link up, 10Mbps, full-duplex, lpa 0x4061 and the interface is dead. Rmmod/insmod does not help. rc1-mm5 works. Ralf -- P: Linus Torvalds patch-2.2.4 -S: Buried alive in diapers +S: Buried alive in reporters ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 (8139too interrupt) 2004-11-17 11:04 ` 2.6.10-rc2-mm1 (8139too interrupt) Ralf Gerbig @ 2004-11-17 19:06 ` Andrew Morton 2004-11-17 22:18 ` Ralf Gerbig 0 siblings, 1 reply; 23+ messages in thread From: Andrew Morton @ 2004-11-17 19:06 UTC (permalink / raw) To: Ralf Gerbig; +Cc: linux-kernel Ralf Gerbig <rge@quengel.org> wrote: > > ... > [ide_intr+0/496] (ide_intr+0x0/0x1f0) > [<c0269c80>] (ide_intr+0x0/0x1f0) > [ide_intr+0/496] (ide_intr+0x0/0x1f0) > [<c0269c80>] (ide_intr+0x0/0x1f0) > [pg0+541642080/1068946432] (rtl8139_interrupt+0x0/0x1d0 [8139too]) > [<e091dd60>] (rtl8139_interrupt+0x0/0x1d0 [8139too]) > Disabling IRQ #19 > > NETDEV WATCHDOG: eth1: transmit timed out > eth1: Transmit timeout, status 0c 0005 c07f media 18. > eth1: Tx queue start entry 63 dirty entry 59. > eth1: Tx descriptor 0 is 0008a03c. > eth1: Tx descriptor 1 is 0008a06a. > eth1: Tx descriptor 2 is 0008a03c. > eth1: Tx descriptor 3 is 0008a03c. (queue head) > eth1: link up, 10Mbps, full-duplex, lpa 0x4061 > > and the interface is dead. Rmmod/insmod does not help. Does this happen immediately, or does it take a bit of load first? We should be looking for changes in 8139too, changes in IDE or changes in interrupt setup. Usually it is the latter. It would be helpful if you could gather the boot-time dmesg output from rc1-mm5 and rc2-mm1 and do a `diff -u', see what changed. Thanks. ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 (8139too interrupt) 2004-11-17 19:06 ` Andrew Morton @ 2004-11-17 22:18 ` Ralf Gerbig 2004-11-18 20:46 ` Ralf Gerbig 0 siblings, 1 reply; 23+ messages in thread From: Ralf Gerbig @ 2004-11-17 22:18 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel Hi Andrew, * Andrew Morton writes: > Ralf Gerbig <rge@quengel.org> wrote: >> >> ... >> [ide_intr+0/496] (ide_intr+0x0/0x1f0) >> [<c0269c80>] (ide_intr+0x0/0x1f0) >> [ide_intr+0/496] (ide_intr+0x0/0x1f0) >> [<c0269c80>] (ide_intr+0x0/0x1f0) >> [pg0+541642080/1068946432] (rtl8139_interrupt+0x0/0x1d0 [8139too]) >> [<e091dd60>] (rtl8139_interrupt+0x0/0x1d0 [8139too]) >> Disabling IRQ #19 >> >> NETDEV WATCHDOG: eth1: transmit timed out >> eth1: Transmit timeout, status 0c 0005 c07f media 18. >> eth1: Tx queue start entry 63 dirty entry 59. >> eth1: Tx descriptor 0 is 0008a03c. >> eth1: Tx descriptor 1 is 0008a06a. >> eth1: Tx descriptor 2 is 0008a03c. >> eth1: Tx descriptor 3 is 0008a03c. (queue head) >> eth1: link up, 10Mbps, full-duplex, lpa 0x4061 >> >> and the interface is dead. Rmmod/insmod does not help. > Does this happen immediately, or does it take a bit of load first? dunno exactly, the log shows the trace right at boot and again after about 6h. Logged in the next morning and found no new messages on lkml, looked at the log, did the ifdown -- rmmod -- modprobe -- ifup, still no joy, rebooted -- the pppd connection came up but went down while changing to runlevel 5. > We should be looking for changes in 8139too, changes in IDE or changes in > interrupt setup. Usually it is the latter. It would be helpful if you > could gather the boot-time dmesg output from rc1-mm5 and rc2-mm1 and do a > `diff -u', see what changed. --- /var/log/boot.msg 2004-11-17 11:37:57.000000000 +0100 +++ /var/log/boot.omsg 2004-11-17 11:36:08.000000000 +0100 @@ -1,10 +1,10 @@ -Inspecting /boot/System.map-2.6.10-rc1-mm5 -Loaded 27073 symbols from /boot/System.map-2.6.10-rc1-mm5. +Inspecting /boot/System.map-2.6.10-rc2-mm1 +Loaded 26846 symbols from /boot/System.map-2.6.10-rc2-mm1. Symbols match kernel version 2.6.10. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. -<4>Linux version 2.6.10-rc1-mm5 (rge@gerlin1) (gcc version 3.3.3 (SuSE Linux)) #1 Thu Nov 11 20:18:40 CET 2004 +<4>Linux version 2.6.10-rc2-mm1 (rge@gerlin1) (gcc version 3.3.3 (SuSE Linux)) #1 Tue Nov 16 21:48:13 CET 2004 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009e800 (usable) <4> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) @@ -34,23 +34,24 @@ <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) +<4>ACPI: BIOS IRQ0 pin2 override ignored. <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) -<7>ACPI: IRQ0 used by override. -<7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <6>Using ACPI (MADT) for SMP configuration information <4>Built 1 zonelists +<7>mapped APIC to ffffd000 (fee00000) +<7>mapped IOAPIC to ffffc000 (fec00000) <6>Initializing CPU#0 -<4>Kernel command line: root=/dev/hda2 console=ttyS1,38400 console=tty0 3 -<4>CPU 0 irqstacks, hard=c045c000 soft=c045b000 +<4>Kernel command line: root=/dev/hda2 3 +<4>CPU 0 irqstacks, hard=c0453000 soft=c0452000 <4>PID hash table entries: 2048 (order: 11, 32768 bytes) -<4>Detected 2088.590 MHz processor. +<4>Detected 2088.645 MHz processor. <6>Using pmtmr for high-res timesource <4>Console: colour VGA+ 80x25 <4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) -<6>Memory: 515032k/524224k available (2178k kernel code, 8632k reserved, 1063k data, 168k init, 0k highmem) +<6>Memory: 515072k/524224k available (2143k kernel code, 8592k reserved, 1055k data, 176k init, 0k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <7>Calibrating delay loop... 4136.96 BogoMIPS (lpj=2068480) <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) @@ -68,14 +69,10 @@ <4> tbxface-0117 [02] acpi_load_tables : ACPI Tables successfully acquired <4>Parsing all Control Methods:................................................................................................................................................................................................................................................................................... <4>Table [DSDT](id F004) - 806 Objects with 77 Devices 275 Methods 36 Regions -<4>ACPI Namespace successfully loaded at root c0488120 +<4>ACPI Namespace successfully loaded at root c047f120 <4>evxfevnt-0093 [03] acpi_enable : Transition to ACPI mode successful <4>ENABLING IO-APIC IRQs -<6>..TIMER: vector=0x31 pin1=2 pin2=-1 -<3>..MP-BIOS bug: 8254 timer not connected to IO-APIC -<6>...trying to set up timer (IRQ0) through the 8259A ... failed. -<6>...trying to set up timer as Virtual Wire IRQ... failed. -<6>...trying to set up timer as ExtINT IRQ... works. +<6>..TIMER: vector=0x31 pin1=0 pin2=-1 <6>NET: Registered protocol family 16 <6>PCI: PCI BIOS revision 2.10 entry at 0xfb4c0, last bus=2 <6>PCI: Using configuration type 1 @@ -160,7 +157,6 @@ <4>vesafb: probe of vesafb0 failed with error -6 <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found -<6>[drm] Initialized drm 1.0.0 20040925 <6>ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1 <6>ACPI: PS/2 Mouse Controller [PS2M] at irq 12 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 @@ -223,8 +219,8 @@ <6>hdg: 40020624 sectors (20490 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(100) <7>hdg: cache flushes not supported <6> hdg: hdg1 hdg2 hdg3 hdg4 -<7>libata version 1.02 loaded. -<7>sata_sil version 0.54 +<7>libata version 1.10 loaded. +<7>sata_sil version 0.8 <4>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 <6>ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 16 (level, high) -> IRQ 16 <6>ata1: SATA max UDMA/100 cmd 0xE0802080 ctl 0xE080208A bmdma 0xE0802000 irq 16 @@ -255,7 +251,7 @@ <4>HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 <6>EXT3-fs: mounted filesystem with ordered data mode. <4>VFS: Mounted root (ext3 filesystem) readonly. -<6>Freeing unused kernel memory: 168k freed +<6>Freeing unused kernel memory: 176k freed <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda2, internal journal <5>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) @@ -281,7 +277,7 @@ Kernel logging (ksyslog) stopped. Kernel log daemon terminating. -Boot logging started on /dev/tty1(/dev/console) at Wed Nov 17 11:37:12 2004 +Boot logging started on /dev/tty1(/dev/console) at Wed Nov 17 11:32:45 2004 --------------------------------------- --- log-rc1-mm5 2004-11-17 22:55:19.088281605 +0100 +++ log-rc2-mm1 2004-11-17 22:55:31.521176195 +0100 @@ -1,34 +1,32 @@ syslogd 1.4.1: restart. -pppd[3551]: Plugin rp-pppoe.so loaded. -pppd[3551]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2 -pppd[3551]: pppd 2.4.2 started by root, uid 0 -pppd[3551]: PPP session is 1892 -pppd[3551]: Using interface ppp0 -pppd[3551]: Connect: ppp0 <--> eth1 -pppd[3551]: Couldn't increase MTU to 1500 -pppd[3551]: Couldn't increase MRU to 1500 -pppd[3551]: Couldn't increase MRU to 1500 -pppd[3551]: Couldn't increase MTU to 1500 -pppd[3551]: Couldn't increase MRU to 1500 -pppd[3551]: Couldn't increase MRU to 1500 -pppd[3551]: PAP authentication succeeded -pppd[3551]: peer from calling number <me> authorized -pppd[3551]: local IP address <mine> -pppd[3551]: remote IP address <the other> -pppd[3551]: Script /etc/ppp/ip-up finished (pid 3705), status = 0x0 -/sbin/hotplug[4730]: /etc/hotplug/ieee1394.agent: line 22: VENDOR_ID: Bad invocation: $VENDOR_ID is not set +pppd[3535]: Plugin rp-pppoe.so loaded. +pppd[3535]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2 +pppd[3535]: pppd 2.4.2 started by root, uid 0 +pppd[3535]: PPP session is 6975 +pppd[3535]: Using interface ppp0 +pppd[3535]: Connect: ppp0 <--> eth1 +pppd[3535]: Couldn't increase MTU to 1500 +pppd[3535]: Couldn't increase MRU to 1500 +pppd[3535]: Couldn't increase MRU to 1500 +pppd[3535]: Couldn't increase MTU to 1500 +pppd[3535]: Couldn't increase MRU to 1500 +pppd[3535]: Couldn't increase MRU to 1500 +pppd[3535]: PAP authentication succeeded +pppd[3535]: peer from calling number <me> authorized +pppd[3535]: local IP address <mine> +pppd[3535]: remote IP address <the other> +pppd[3535]: Script /etc/ppp/ip-up finished (pid 3708), status = 0x0 +/etc/hotplug/usb.agent[4083]: need a device for this command +/etc/hotplug/usb.agent[4224]: need a device for this command +/etc/hotplug/usb.agent[4277]: need a device for this command +/etc/hotplug/usb.agent[4473]: need a device for this command +/etc/hotplug/usb.agent[4462]: need a device for this command +/sbin/hotplug[4643]: /etc/hotplug/ieee1394.agent: line 22: VENDOR_ID: Bad invocation: $VENDOR_ID is not set +/sbin/hotplug[4770]: /etc/hotplug/ieee1394.agent: line 22: VENDOR_ID: Bad invocation: $VENDOR_ID is not set +/sbin/hotplug[4789]: /etc/hotplug/ieee1394.agent: line 22: VENDOR_ID: Bad invocation: $VENDOR_ID is not set kernel: klogd 1.4.1, log source = /proc/kmsg started. -kernel: Inspecting /boot/System.map-2.6.10-rc1-mm5 -kernel: Loaded 27073 symbols from /boot/System.map-2.6.10-rc1-mm5. +kernel: Inspecting /boot/System.map-2.6.10-rc2-mm1 +kernel: Loaded 26846 symbols from /boot/System.map-2.6.10-rc2-mm1. kernel: Symbols match kernel version 2.6.10. kernel: No module symbols loaded - kernel modules not enabled. kernel: ip_tables: (C) 2000-2002 Netfilter core team @@ -59,105 +57,102 @@ kernel: eth0: no link during initialization. kernel: 8139too Fast Ethernet driver 0.9.27 kernel: ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 19 (level, high) -> IRQ 19 -kernel: eth1: RealTek RTL8139 at 0xe08ee000, 00:04:61:4a:11:a5, IRQ 19 +kernel: eth1: RealTek RTL8139 at 0xe08ea000, 00:04:61:4a:11:a5, IRQ 19 kernel: eth1: Identified 8139 chip type 'RTL-8101' kernel: eth1: link up, 10Mbps, full-duplex, lpa 0x4061 kernel: PPP generic driver version 2.4.2 kernel: NET: Registered protocol family 24 +kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 +kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 21 (level, high) -> IRQ 21 +kernel: ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller +kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64 +kernel: ehci_hcd 0000:00:02.2: irq 21, pci mem 0xdd004000 kernel: Linux agpgart interface v0.100 (c) Dave Jones +kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 +kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2 +kernel: ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 +kernel: ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) +kernel: hub 1-0:1.0: USB hub found +kernel: hub 1-0:1.0: 6 ports detected kernel: agpgart: Detected NVIDIA nForce2 chipset kernel: agpgart: Maximum main memory to use for agp memory: 439M kernel: agpgart: AGP aperture is 128M @ 0xc0000000 -kernel: ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) -kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 -kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 21 (level, high) -> IRQ 21 +kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 +kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 20 (level, high) -> IRQ 20 kernel: ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64 -kernel: ohci_hcd 0000:00:02.0: irq 21, pci mem 0xdd002000 -kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 -kernel: hub 1-0:1.0: USB hub found -kernel: hub 1-0:1.0: 3 ports detected -kernel: ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 -kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 20 (level, high) -> IRQ 20 -kernel: ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2) -kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64 -kernel: ohci_hcd 0000:00:02.1: irq 20, pci mem 0xdd003000 -kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 -kernel: usb 1-3: new low speed USB device using ohci_hcd and address 2 +kernel: ohci_hcd 0000:00:02.0: irq 20, pci mem 0xdd002000 +kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 kernel: hub 2-0:1.0: USB hub found kernel: hub 2-0:1.0: 3 ports detected -kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 -kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040 -kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 -kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 22 (level, high) -> IRQ 22 -kernel: ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller -kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64 -kernel: ehci_hcd 0000:00:02.2: irq 22, pci mem 0xdd004000 -kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 -kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2 -kernel: ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 +kernel: ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 +kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 22 (level, high) -> IRQ 22 +kernel: ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2) +kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64 +kernel: ohci_hcd 0000:00:02.1: irq 22, pci mem 0xdd003000 +kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 kernel: hub 3-0:1.0: USB hub found -kernel: hub 3-0:1.0: 6 ports detected +kernel: hub 3-0:1.0: 3 ports detected +kernel: usb 2-3: new low speed USB device using ohci_hcd and address 2 kernel: ieee1394: Initialized config rom entry `ip1394' -kernel: usb 1-3: USB disconnect, address 2 +kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 +kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040 kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> kernel: ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 kernel: ACPI: PCI interrupt 0000:01:0d.0[A] -> GSI 17 (level, high) -> IRQ 17 kernel: ohci1394: fw-host0: Unexpected PCI resource length of 1000! -kernel: usb 1-3: new low speed USB device using ohci_hcd and address 3 kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[dc007000-dc0077ff] Max Packet=[2048] kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[000461000003e56a] -/sbin/hotplug[4955]: /etc/hotplug/ieee1394.agent: line 22: VENDOR_ID: Bad invocation: $VENDOR_ID is not set -/sbin/hotplug[4936]: /etc/hotplug/ieee1394.agent: line 22: VENDOR_ID: Bad invocation: $VENDOR_ID is not set -in.identd[5083]: started +in.identd[5088]: started kernel: NET: Registered protocol family 10 -kernel: Disabled Privacy Extensions on device c03bf8c0(lo) +kernel: Disabled Privacy Extensions on device c03b55a0(lo) kernel: IPv6 over IPv4 tunneling driver +kernel: Disabled Privacy Extensions on device dc330000(sit0) ip-up: fetchmail: no mailservers have been specified. -kernel: snd_intel8x0: Unknown parameter `#enable' -/sbin/hotplug[5611]: /sbin/hotplug: line 74: [: too many arguments -kernel: ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 -kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21 -kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64 -named[5664]: starting BIND 9.2.3 -t /var/lib/named -u named -named[5664]: using 1 CPU -sshd[5672]: Server listening on :: port 22. -/sbin/hotplug[5611]: /sbin/hotplug: line 74: [: too many arguments kernel: input: USB HID v1.10 Keyboard [Twinhan Tech Remote Control] on usb-0000:00:02.0-3 kernel: input: USB HID v1.10 Mouse [Twinhan Tech Remote Control] on usb-0000:00:02.0-3 kernel: usbcore: registered new driver usbhid kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver +kernel: snd_intel8x0: Unknown parameter `#enable' +kernel: ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 +kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21 +kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64 +sshd[5696]: Server listening on :: port 22. +/sbin/hotplug[5674]: /sbin/hotplug: line 74: [: too many arguments +named[5794]: starting BIND 9.2.3 -t /var/lib/named -u named +named[5794]: using 1 CPU +/sbin/hotplug[5674]: /sbin/hotplug: line 74: [: too many arguments +named[5794]: loading configuration from '/etc/named.conf' ip-up: postqueue: fatal: Cannot flush mail queue - mail system is down ifup: No configuration found for sit0 su: (to news) root on /dev/pts/2 su: pam_unix2: session started for user news, service su @@ -173,7 +168,6 @@ dhcpd: Wrote 0 deleted host decls to leases file. dhcpd: Wrote 0 new dynamic host decls to leases file. dhcpd: Wrote 0 leases to leases file. -kernel: parport_pc: Ignoring new-style parameters in presence of obsolete ones kernel: parport: PnPBIOS parport detected. kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] dhcpd: Listening on Socket/eth0/192.168.100.0/24 @@ -182,79 +176,162 @@ kernel: lp0: using parport0 (interrupt-driven). kernel: usbcore: registered new driver usbserial kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 [ ... ] +kernel: [drm] Initialized drm 1.0.0 20040925 kernel: [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc RV280 [Radeon 9200] kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high) -> IRQ 19 -kernel: [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held -kernel: [drm:drm_unlock] *ERROR* Process 10713 using kernel context 0 +kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. +kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode +kernel: agpgart: Putting AGP V3 device at 0000:02:00.0 into 4x mode +kernel: [drm] Loading R200 Microcode kernel: drivers/usb/input/hid-input.c: event field not found +kernel: irq 19: nobody cared! +kernel: [__report_bad_irq+42/144] __report_bad_irq+0x2a/0x90 +kernel: [<c01388ea>] __report_bad_irq+0x2a/0x90 +kernel: [handle_IRQ_event+57/112] handle_IRQ_event+0x39/0x70 +kernel: [<c01381a9>] handle_IRQ_event+0x39/0x70 +kernel: [note_interrupt+149/192] note_interrupt+0x95/0xc0 +kernel: [<c0138a05>] note_interrupt+0x95/0xc0 +kernel: [__do_IRQ+357/384] __do_IRQ+0x165/0x180 +kernel: [<c0138345>] __do_IRQ+0x165/0x180 +kernel: [do_IRQ+71/112] do_IRQ+0x47/0x70 +kernel: [<c0105907>] do_IRQ+0x47/0x70 +kernel: ======================= +kernel: [common_interrupt+26/32] common_interrupt+0x1a/0x20 +kernel: [<c0103c52>] common_interrupt+0x1a/0x20 +kernel: [default_idle+0/48] default_idle+0x0/0x30 +kernel: [<c0101030>] default_idle+0x0/0x30 +kernel: [default_idle+35/48] default_idle+0x23/0x30 +kernel: [<c0101053>] default_idle+0x23/0x30 +kernel: [cpu_idle+54/112] cpu_idle+0x36/0x70 +kernel: [<c01010d6>] cpu_idle+0x36/0x70 +kernel: [start_kernel+346/384] start_kernel+0x15a/0x180 +kernel: [<c042180a>] start_kernel+0x15a/0x180 +kernel: [unknown_bootoption+0/480] unknown_bootoption+0x0/0x1e0 +kernel: [<c0421380>] unknown_bootoption+0x0/0x1e0 +kernel: handlers: +kernel: [ide_intr+0/496] (ide_intr+0x0/0x1f0) +kernel: [<c0269c80>] (ide_intr+0x0/0x1f0) +kernel: [ide_intr+0/496] (ide_intr+0x0/0x1f0) +kernel: [<c0269c80>] (ide_intr+0x0/0x1f0) +kernel: [pg0+541625696/1068946432] (rtl8139_interrupt+0x0/0x1d0 [8139too]) +kernel: [<e0919d60>] (rtl8139_interrupt+0x0/0x1d0 [8139too]) +kernel: Disabling IRQ #19 +kernel: NETDEV WATCHDOG: eth1: transmit timed out +kernel: eth1: Transmit timeout, status 0c 0005 c07f media 18. +kernel: eth1: Tx queue start entry 70 dirty entry 66. +kernel: eth1: Tx descriptor 0 is 0008a06a. +kernel: eth1: Tx descriptor 1 is 0008a03c. +kernel: eth1: Tx descriptor 2 is 0008a03c. (queue head) +kernel: eth1: Tx descriptor 3 is 0008a03c. +kernel: eth1: link up, 10Mbps, full-duplex, lpa 0x4061 +kernel: NETDEV WATCHDOG: eth1: transmit timed out +kernel: eth1: Transmit timeout, status 0d 0004 c07f media 18. +kernel: eth1: Tx queue start entry 4 dirty entry 0. +kernel: eth1: Tx descriptor 0 is 0008a062. (queue head) +kernel: eth1: Tx descriptor 1 is 0008a062. +kernel: eth1: Tx descriptor 2 is 0008a03c. +kernel: eth1: Tx descriptor 3 is 0008a03c. +kernel: eth1: link up, 10Mbps, full-duplex, lpa 0x4061 +pppd[3535]: No response to 5 echo-requests +pppd[3535]: Serial link appears to be disconnected. +pppd[3535]: Couldn't increase MTU to 1500 +pppd[3535]: Couldn't increase MRU to 1500 +pppd[3535]: Script /etc/ppp/ip-down finished (pid 11312), status = 0x0 +pppd[3535]: Connection terminated. +pppd[3535]: Connect time 2.1 minutes. +pppd[3535]: Sent 3160 bytes, received 8797 bytes. +kernel: NETDEV WATCHDOG: eth1: transmit timed out +kernel: eth1: Transmit timeout, status 0c 0005 c07f media 18. +kernel: eth1: Tx queue start entry 4 dirty entry 0. +kernel: eth1: Tx descriptor 0 is 0008a03c. (queue head) +kernel: eth1: Tx descriptor 1 is 0008a03c. +kernel: eth1: Tx descriptor 2 is 0008a03c. +kernel: eth1: Tx descriptor 3 is 0008a03c. +kernel: eth1: link up, 10Mbps, full-duplex, lpa 0x4061 +pppd[3535]: Timeout waiting for PADO packets +pppd[3535]: Unable to complete PPPoE Discovery +kernel: NETDEV WATCHDOG: eth1: transmit timed out +kernel: eth1: Transmit timeout, status 0c 0005 c07f media 18. +kernel: eth1: Tx queue start entry 4 dirty entry 0. +kernel: eth1: Tx descriptor 0 is 0008a03c. (queue head) +kernel: eth1: Tx descriptor 1 is 0008a03c. +kernel: eth1: Tx descriptor 2 is 0008a03c. +kernel: eth1: Tx descriptor 3 is 0008a03c. +kernel: eth1: link up, 10Mbps, full-duplex, lpa 0x4061 +pppd[3535]: Timeout waiting for PADO packets +pppd[3535]: Unable to complete PPPoE Discovery +pppd[3535]: Timeout waiting for PADO packets +pppd[3535]: Unable to complete PPPoE Discovery Ralf -- P: Linus Torvalds patch-2.2.4 -S: Buried alive in diapers +S: Buried alive in reporters ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 (8139too interrupt) 2004-11-17 22:18 ` Ralf Gerbig @ 2004-11-18 20:46 ` Ralf Gerbig 2004-11-19 7:48 ` Dave Airlie 0 siblings, 1 reply; 23+ messages in thread From: Ralf Gerbig @ 2004-11-18 20:46 UTC (permalink / raw) To: Andrew Morton, Dave Jones; +Cc: linux-kernel [ cc'd Dave ] * Ralf Gerbig writes: > Hi Andrew, * Andrew Morton writes: >> Ralf Gerbig <rge@quengel.org> wrote: >>> >>> ... >>> [ide_intr+0/496] (ide_intr+0x0/0x1f0) >>> [<c0269c80>] (ide_intr+0x0/0x1f0) >>> [ide_intr+0/496] (ide_intr+0x0/0x1f0) >>> [<c0269c80>] (ide_intr+0x0/0x1f0) >>> [pg0+541642080/1068946432] (rtl8139_interrupt+0x0/0x1d0 [8139too]) >>> [<e091dd60>] (rtl8139_interrupt+0x0/0x1d0 [8139too]) >>> Disabling IRQ #19 >>> >>> NETDEV WATCHDOG: eth1: transmit timed out >>> eth1: Transmit timeout, status 0c 0005 c07f media 18. >>> eth1: Tx queue start entry 63 dirty entry 59. >>> eth1: Tx descriptor 0 is 0008a03c. >>> eth1: Tx descriptor 1 is 0008a06a. >>> eth1: Tx descriptor 2 is 0008a03c. >>> eth1: Tx descriptor 3 is 0008a03c. (queue head) >>> eth1: link up, 10Mbps, full-duplex, lpa 0x4061 >>> >>> and the interface is dead. Rmmod/insmod does not help. >> Does this happen immediately, or does it take a bit of load first? > dunno exactly, the log shows the trace right at boot and again after > about 6h. > Logged in the next morning and found no new messages on lkml, looked > at the log, did the ifdown -- rmmod -- modprobe -- ifup, still no joy, > rebooted -- the pppd connection came up but went down while changing > to runlevel 5. investigating further, radeon.ko nukes the NIC / INT changing to runlevel 5 gets: [2.6.10-rc2-mm2] device class 'drm': registering [drm] Initialized drm 1.0.0 20040925 [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc RV280 [Radeon 9200] ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high) -> IRQ 19 CLASS: registering class device: ID = 'card0' class_hotplug - name = card0 agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:02:00.0 into 4x mode [drm] Loading R200 Microcode drivers/usb/input/hid-input.c: event field not found irq 19: nobody cared! [ ...see below ] 0: 75841 IO-APIC-edge timer 1: 94 IO-APIC-edge i8042 3: 11 IO-APIC-edge serial 7: 0 IO-APIC-edge parport0 9: 0 IO-APIC-level acpi 12: 127 IO-APIC-edge i8042 14: 3453 IO-APIC-edge ide0 15: 1 IO-APIC-edge ide1 16: 46 IO-APIC-level libata, fcpcipnp 17: 2 IO-APIC-level ohci1394 19: 20000 IO-APIC-level ide2, ide3, eth1 20: 383 IO-APIC-level ohci_hcd 21: 0 IO-APIC-level ohci_hcd, NVidia nForce2 22: 5178 IO-APIC-level eth0, ehci_hcd NMI: 0 LOC: 75736 ERR: 0 MIS: 0 when booting without radeon, eth1 works, with radeon neither eth1 nor drm are working. [2.6.9-mm1] ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high) -> IRQ 19 [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc RV280 [Radeon 9200] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:02:00.0 into 4x mode [drm] Loading R200 Microcode CPU0 0: 235520 XT-PIC timer 1: 399 IO-APIC-edge i8042 3: 11 IO-APIC-edge serial 7: 503 IO-APIC-edge parport0 9: 0 IO-APIC-level acpi 12: 1587 IO-APIC-edge i8042 14: 6930 IO-APIC-edge ide0 15: 1 IO-APIC-edge ide1 16: 1279 IO-APIC-level libata, fcpcipnp 17: 2 IO-APIC-level ohci1394 19: 10838 IO-APIC-level ide2, ide3, eth1, radeon@PCI:2:0:0 20: 1629 IO-APIC-level ohci_hcd 21: 0 IO-APIC-level ohci_hcd 22: 21399 IO-APIC-level eth0, ehci_hcd NMI: 0 LOC: 235288 ERR: 0 MIS: 0 on 2.6.9-mm1 eth1 _and_ drm are working according to glxlinfo. from 2.6.10-rc1-mm5 on (did not try anything between 2.6.9-mm1 and 2.6.10-rc1-mm5) drm no workie. System: SuSE 9.1, EPOX 8RDA+, Athlon XP2800 0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) 0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) 0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) 0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) 0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) 0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) 0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4) 0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) 0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) 0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) 0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) 0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) 0000:01:07.0 Unknown mass storage controller: Promise Technology, Inc. 20268 (rev 02) 0000:01:08.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN (rev 01) 0000:01:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 0000:01:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 0000:01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:01:0c.0 RAID bus controller: CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller (rev 02) 0000:01:0d.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 61) 0000:02:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV280 [Radeon 9200] (rev 01) 0000:02:00.1 Display controller: ATI Technologies Inc: Unknown device 5941 (rev 01) [fullquote for Dave ] >> We should be looking for changes in 8139too, changes in IDE or changes in >> interrupt setup. Usually it is the latter. It would be helpful if you >> could gather the boot-time dmesg output from rc1-mm5 and rc2-mm1 and do a >> `diff -u', see what changed. > --- /var/log/boot.msg 2004-11-17 11:37:57.000000000 +0100 > +++ /var/log/boot.omsg 2004-11-17 11:36:08.000000000 +0100 > @@ -1,10 +1,10 @@ > -Inspecting /boot/System.map-2.6.10-rc1-mm5 > -Loaded 27073 symbols from /boot/System.map-2.6.10-rc1-mm5. > +Inspecting /boot/System.map-2.6.10-rc2-mm1 > +Loaded 26846 symbols from /boot/System.map-2.6.10-rc2-mm1. > Symbols match kernel version 2.6.10. > No module symbols loaded - kernel modules not enabled. > klogd 1.4.1, log source = ksyslog started. > -<4>Linux version 2.6.10-rc1-mm5 (rge@gerlin1) (gcc version 3.3.3 (SuSE Linux)) #1 Thu Nov 11 20:18:40 CET 2004 > +<4>Linux version 2.6.10-rc2-mm1 (rge@gerlin1) (gcc version 3.3.3 (SuSE Linux)) #1 Tue Nov 16 21:48:13 CET 2004 > <6>BIOS-provided physical RAM map: > <4> BIOS-e820: 0000000000000000 - 000000000009e800 (usable) > <4> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) > @@ -34,23 +34,24 @@ > <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > <4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 > <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > +<4>ACPI: BIOS IRQ0 pin2 override ignored. > <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > -<7>ACPI: IRQ0 used by override. > -<7>ACPI: IRQ2 used by override. > <7>ACPI: IRQ9 used by override. > <4>Enabling APIC mode: Flat. Using 1 I/O APICs > <6>Using ACPI (MADT) for SMP configuration information > <4>Built 1 zonelists > +<7>mapped APIC to ffffd000 (fee00000) > +<7>mapped IOAPIC to ffffc000 (fec00000) > <6>Initializing CPU#0 > -<4>Kernel command line: root=/dev/hda2 console=ttyS1,38400 console=tty0 3 > -<4>CPU 0 irqstacks, hard=c045c000 soft=c045b000 > +<4>Kernel command line: root=/dev/hda2 3 > +<4>CPU 0 irqstacks, hard=c0453000 soft=c0452000 > <4>PID hash table entries: 2048 (order: 11, 32768 bytes) > -<4>Detected 2088.590 MHz processor. > +<4>Detected 2088.645 MHz processor. > <6>Using pmtmr for high-res timesource > <4>Console: colour VGA+ 80x25 > <4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > <4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > -<6>Memory: 515032k/524224k available (2178k kernel code, 8632k reserved, 1063k data, 168k init, 0k highmem) > +<6>Memory: 515072k/524224k available (2143k kernel code, 8592k reserved, 1055k data, 176k init, 0k highmem) > <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. > <7>Calibrating delay loop... 4136.96 BogoMIPS (lpj=2068480) > <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > @@ -68,14 +69,10 @@ > <4> tbxface-0117 [02] acpi_load_tables : ACPI Tables successfully acquired > <4>Parsing all Control Methods:................................................................................................................................................................................................................................................................................... > <4>Table [DSDT](id F004) - 806 Objects with 77 Devices 275 Methods 36 Regions > -<4>ACPI Namespace successfully loaded at root c0488120 > +<4>ACPI Namespace successfully loaded at root c047f120 > <4>evxfevnt-0093 [03] acpi_enable : Transition to ACPI mode successful > <4>ENABLING IO-APIC IRQs > -<6>..TIMER: vector=0x31 pin1=2 pin2=-1 > -<3>..MP-BIOS bug: 8254 timer not connected to IO-APIC > -<6>...trying to set up timer (IRQ0) through the 8259A ... failed. > -<6>...trying to set up timer as Virtual Wire IRQ... failed. > -<6>...trying to set up timer as ExtINT IRQ... works. > +<6>..TIMER: vector=0x31 pin1=0 pin2=-1 > <6>NET: Registered protocol family 16 > <6>PCI: PCI BIOS revision 2.10 entry at 0xfb4c0, last bus=2 > <6>PCI: Using configuration type 1 > @@ -160,7 +157,6 @@ > <4>vesafb: probe of vesafb0 failed with error -6 > <6>isapnp: Scanning for PnP cards... > <6>isapnp: No Plug & Play device found > -<6>[drm] Initialized drm 1.0.0 20040925 > <6>ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1 > <6>ACPI: PS/2 Mouse Controller [PS2M] at irq 12 > <6>serio: i8042 AUX port at 0x60,0x64 irq 12 > @@ -223,8 +219,8 @@ > <6>hdg: 40020624 sectors (20490 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(100) > <7>hdg: cache flushes not supported > <6> hdg: hdg1 hdg2 hdg3 hdg4 > -<7>libata version 1.02 loaded. > -<7>sata_sil version 0.54 > +<7>libata version 1.10 loaded. > +<7>sata_sil version 0.8 > <4>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > <6>ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 16 (level, high) -> IRQ 16 > <6>ata1: SATA max UDMA/100 cmd 0xE0802080 ctl 0xE080208A bmdma 0xE0802000 irq 16 > @@ -255,7 +251,7 @@ > <4>HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 > <6>EXT3-fs: mounted filesystem with ordered data mode. > <4>VFS: Mounted root (ext3 filesystem) readonly. > -<6>Freeing unused kernel memory: 168k freed > +<6>Freeing unused kernel memory: 176k freed > <6>kjournald starting. Commit interval 5 seconds > <6>EXT3 FS on hda2, internal journal > <5>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) > @@ -281,7 +277,7 @@ > Kernel logging (ksyslog) stopped. > Kernel log daemon terminating. > -Boot logging started on /dev/tty1(/dev/console) at Wed Nov 17 11:37:12 2004 > +Boot logging started on /dev/tty1(/dev/console) at Wed Nov 17 11:32:45 2004 > --------------------------------------- > --- log-rc1-mm5 2004-11-17 22:55:19.088281605 +0100 > +++ log-rc2-mm1 2004-11-17 22:55:31.521176195 +0100 > @@ -1,34 +1,32 @@ > syslogd 1.4.1: restart. > -pppd[3551]: Plugin rp-pppoe.so loaded. > -pppd[3551]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2 > -pppd[3551]: pppd 2.4.2 started by root, uid 0 > -pppd[3551]: PPP session is 1892 > -pppd[3551]: Using interface ppp0 > -pppd[3551]: Connect: ppp0 <--> eth1 > -pppd[3551]: Couldn't increase MTU to 1500 > -pppd[3551]: Couldn't increase MRU to 1500 > -pppd[3551]: Couldn't increase MRU to 1500 > -pppd[3551]: Couldn't increase MTU to 1500 > -pppd[3551]: Couldn't increase MRU to 1500 > -pppd[3551]: Couldn't increase MRU to 1500 > -pppd[3551]: PAP authentication succeeded > -pppd[3551]: peer from calling number <me> authorized > -pppd[3551]: local IP address <mine> > -pppd[3551]: remote IP address <the other> > -pppd[3551]: Script /etc/ppp/ip-up finished (pid 3705), status = 0x0 > -/sbin/hotplug[4730]: /etc/hotplug/ieee1394.agent: line 22: VENDOR_ID: Bad invocation: $VENDOR_ID is not set > +pppd[3535]: Plugin rp-pppoe.so loaded. > +pppd[3535]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2 > +pppd[3535]: pppd 2.4.2 started by root, uid 0 > +pppd[3535]: PPP session is 6975 > +pppd[3535]: Using interface ppp0 > +pppd[3535]: Connect: ppp0 <--> eth1 > +pppd[3535]: Couldn't increase MTU to 1500 > +pppd[3535]: Couldn't increase MRU to 1500 > +pppd[3535]: Couldn't increase MRU to 1500 > +pppd[3535]: Couldn't increase MTU to 1500 > +pppd[3535]: Couldn't increase MRU to 1500 > +pppd[3535]: Couldn't increase MRU to 1500 > +pppd[3535]: PAP authentication succeeded > +pppd[3535]: peer from calling number <me> authorized > +pppd[3535]: local IP address <mine> > +pppd[3535]: remote IP address <the other> > +pppd[3535]: Script /etc/ppp/ip-up finished (pid 3708), status = 0x0 > +/etc/hotplug/usb.agent[4083]: need a device for this command > +/etc/hotplug/usb.agent[4224]: need a device for this command > +/etc/hotplug/usb.agent[4277]: need a device for this command > +/etc/hotplug/usb.agent[4473]: need a device for this command > +/etc/hotplug/usb.agent[4462]: need a device for this command > +/sbin/hotplug[4643]: /etc/hotplug/ieee1394.agent: line 22: VENDOR_ID: Bad invocation: $VENDOR_ID is not set > +/sbin/hotplug[4770]: /etc/hotplug/ieee1394.agent: line 22: VENDOR_ID: Bad invocation: $VENDOR_ID is not set > +/sbin/hotplug[4789]: /etc/hotplug/ieee1394.agent: line 22: VENDOR_ID: Bad invocation: $VENDOR_ID is not set > kernel: klogd 1.4.1, log source = /proc/kmsg started. > -kernel: Inspecting /boot/System.map-2.6.10-rc1-mm5 > -kernel: Loaded 27073 symbols from /boot/System.map-2.6.10-rc1-mm5. > +kernel: Inspecting /boot/System.map-2.6.10-rc2-mm1 > +kernel: Loaded 26846 symbols from /boot/System.map-2.6.10-rc2-mm1. > kernel: Symbols match kernel version 2.6.10. > kernel: No module symbols loaded - kernel modules not enabled. > kernel: ip_tables: (C) 2000-2002 Netfilter core team > @@ -59,105 +57,102 @@ > kernel: eth0: no link during initialization. > kernel: 8139too Fast Ethernet driver 0.9.27 > kernel: ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 19 (level, high) -> IRQ 19 > -kernel: eth1: RealTek RTL8139 at 0xe08ee000, 00:04:61:4a:11:a5, IRQ 19 > +kernel: eth1: RealTek RTL8139 at 0xe08ea000, 00:04:61:4a:11:a5, IRQ 19 > kernel: eth1: Identified 8139 chip type 'RTL-8101' > kernel: eth1: link up, 10Mbps, full-duplex, lpa 0x4061 > kernel: PPP generic driver version 2.4.2 > kernel: NET: Registered protocol family 24 > +kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 > +kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 21 (level, high) -> IRQ 21 > +kernel: ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller > +kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64 > +kernel: ehci_hcd 0000:00:02.2: irq 21, pci mem 0xdd004000 > kernel: Linux agpgart interface v0.100 (c) Dave Jones > +kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 > +kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2 > +kernel: ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 > +kernel: ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) > +kernel: hub 1-0:1.0: USB hub found > +kernel: hub 1-0:1.0: 6 ports detected > kernel: agpgart: Detected NVIDIA nForce2 chipset > kernel: agpgart: Maximum main memory to use for agp memory: 439M > kernel: agpgart: AGP aperture is 128M @ 0xc0000000 > -kernel: ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) > -kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 > -kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 21 (level, high) -> IRQ 21 > +kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 > +kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 20 (level, high) -> IRQ 20 > kernel: ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller > kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64 > -kernel: ohci_hcd 0000:00:02.0: irq 21, pci mem 0xdd002000 > -kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 > -kernel: hub 1-0:1.0: USB hub found > -kernel: hub 1-0:1.0: 3 ports detected > -kernel: ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 > -kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 20 (level, high) -> IRQ 20 > -kernel: ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2) > -kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64 > -kernel: ohci_hcd 0000:00:02.1: irq 20, pci mem 0xdd003000 > -kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 > -kernel: usb 1-3: new low speed USB device using ohci_hcd and address 2 > +kernel: ohci_hcd 0000:00:02.0: irq 20, pci mem 0xdd002000 > +kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 > kernel: hub 2-0:1.0: USB hub found > kernel: hub 2-0:1.0: 3 ports detected > -kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 > -kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040 > -kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 > -kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 22 (level, high) -> IRQ 22 > -kernel: ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller > -kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64 > -kernel: ehci_hcd 0000:00:02.2: irq 22, pci mem 0xdd004000 > -kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 > -kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2 > -kernel: ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 > +kernel: ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 > +kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 22 (level, high) -> IRQ 22 > +kernel: ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2) > +kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64 > +kernel: ohci_hcd 0000:00:02.1: irq 22, pci mem 0xdd003000 > +kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 > kernel: hub 3-0:1.0: USB hub found > -kernel: hub 3-0:1.0: 6 ports detected > +kernel: hub 3-0:1.0: 3 ports detected > +kernel: usb 2-3: new low speed USB device using ohci_hcd and address 2 > kernel: ieee1394: Initialized config rom entry `ip1394' > -kernel: usb 1-3: USB disconnect, address 2 > +kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 > +kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040 > kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> > kernel: ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 > kernel: ACPI: PCI interrupt 0000:01:0d.0[A] -> GSI 17 (level, high) -> IRQ 17 > kernel: ohci1394: fw-host0: Unexpected PCI resource length of 1000! > -kernel: usb 1-3: new low speed USB device using ohci_hcd and address 3 > kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[dc007000-dc0077ff] Max Packet=[2048] > kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[000461000003e56a] > -/sbin/hotplug[4955]: /etc/hotplug/ieee1394.agent: line 22: VENDOR_ID: Bad invocation: $VENDOR_ID is not set > -/sbin/hotplug[4936]: /etc/hotplug/ieee1394.agent: line 22: VENDOR_ID: Bad invocation: $VENDOR_ID is not set > -in.identd[5083]: started > +in.identd[5088]: started > kernel: NET: Registered protocol family 10 > -kernel: Disabled Privacy Extensions on device c03bf8c0(lo) > +kernel: Disabled Privacy Extensions on device c03b55a0(lo) > kernel: IPv6 over IPv4 tunneling driver > +kernel: Disabled Privacy Extensions on device dc330000(sit0) > ip-up: fetchmail: no mailservers have been specified. > -kernel: snd_intel8x0: Unknown parameter `#enable' > -/sbin/hotplug[5611]: /sbin/hotplug: line 74: [: too many arguments > -kernel: ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 > -kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21 > -kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64 > -named[5664]: starting BIND 9.2.3 -t /var/lib/named -u named > -named[5664]: using 1 CPU > -sshd[5672]: Server listening on :: port 22. > -/sbin/hotplug[5611]: /sbin/hotplug: line 74: [: too many arguments > kernel: input: USB HID v1.10 Keyboard [Twinhan Tech Remote Control] on usb-0000:00:02.0-3 > kernel: input: USB HID v1.10 Mouse [Twinhan Tech Remote Control] on usb-0000:00:02.0-3 > kernel: usbcore: registered new driver usbhid > kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver > +kernel: snd_intel8x0: Unknown parameter `#enable' > +kernel: ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 > +kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21 > +kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64 > +sshd[5696]: Server listening on :: port 22. > +/sbin/hotplug[5674]: /sbin/hotplug: line 74: [: too many arguments > +named[5794]: starting BIND 9.2.3 -t /var/lib/named -u named > +named[5794]: using 1 CPU > +/sbin/hotplug[5674]: /sbin/hotplug: line 74: [: too many arguments > +named[5794]: loading configuration from '/etc/named.conf' > ip-up: postqueue: fatal: Cannot flush mail queue - mail system is down > ifup: No configuration found for sit0 > su: (to news) root on /dev/pts/2 > su: pam_unix2: session started for user news, service su > @@ -173,7 +168,6 @@ > dhcpd: Wrote 0 deleted host decls to leases file. > dhcpd: Wrote 0 new dynamic host decls to leases file. > dhcpd: Wrote 0 leases to leases file. > -kernel: parport_pc: Ignoring new-style parameters in presence of obsolete ones > kernel: parport: PnPBIOS parport detected. > kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > dhcpd: Listening on Socket/eth0/192.168.100.0/24 > @@ -182,79 +176,162 @@ > kernel: lp0: using parport0 (interrupt-driven). > kernel: usbcore: registered new driver usbserial > kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 > [ ... ] > +kernel: [drm] Initialized drm 1.0.0 20040925 > kernel: [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc RV280 [Radeon 9200] > kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high) -> IRQ 19 > -kernel: [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held > -kernel: [drm:drm_unlock] *ERROR* Process 10713 using kernel context 0 > +kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. > +kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode > +kernel: agpgart: Putting AGP V3 device at 0000:02:00.0 into 4x mode > +kernel: [drm] Loading R200 Microcode > kernel: drivers/usb/input/hid-input.c: event field not found > +kernel: irq 19: nobody cared! > +kernel: [__report_bad_irq+42/144] __report_bad_irq+0x2a/0x90 > +kernel: [<c01388ea>] __report_bad_irq+0x2a/0x90 > +kernel: [handle_IRQ_event+57/112] handle_IRQ_event+0x39/0x70 > +kernel: [<c01381a9>] handle_IRQ_event+0x39/0x70 > +kernel: [note_interrupt+149/192] note_interrupt+0x95/0xc0 > +kernel: [<c0138a05>] note_interrupt+0x95/0xc0 > +kernel: [__do_IRQ+357/384] __do_IRQ+0x165/0x180 > +kernel: [<c0138345>] __do_IRQ+0x165/0x180 > +kernel: [do_IRQ+71/112] do_IRQ+0x47/0x70 > +kernel: [<c0105907>] do_IRQ+0x47/0x70 > +kernel: ======================= > +kernel: [common_interrupt+26/32] common_interrupt+0x1a/0x20 > +kernel: [<c0103c52>] common_interrupt+0x1a/0x20 > +kernel: [default_idle+0/48] default_idle+0x0/0x30 > +kernel: [<c0101030>] default_idle+0x0/0x30 > +kernel: [default_idle+35/48] default_idle+0x23/0x30 > +kernel: [<c0101053>] default_idle+0x23/0x30 > +kernel: [cpu_idle+54/112] cpu_idle+0x36/0x70 > +kernel: [<c01010d6>] cpu_idle+0x36/0x70 > +kernel: [start_kernel+346/384] start_kernel+0x15a/0x180 > +kernel: [<c042180a>] start_kernel+0x15a/0x180 > +kernel: [unknown_bootoption+0/480] unknown_bootoption+0x0/0x1e0 > +kernel: [<c0421380>] unknown_bootoption+0x0/0x1e0 > +kernel: handlers: > +kernel: [ide_intr+0/496] (ide_intr+0x0/0x1f0) > +kernel: [<c0269c80>] (ide_intr+0x0/0x1f0) > +kernel: [ide_intr+0/496] (ide_intr+0x0/0x1f0) > +kernel: [<c0269c80>] (ide_intr+0x0/0x1f0) > +kernel: [pg0+541625696/1068946432] (rtl8139_interrupt+0x0/0x1d0 [8139too]) > +kernel: [<e0919d60>] (rtl8139_interrupt+0x0/0x1d0 [8139too]) > +kernel: Disabling IRQ #19 > +kernel: NETDEV WATCHDOG: eth1: transmit timed out > +kernel: eth1: Transmit timeout, status 0c 0005 c07f media 18. > +kernel: eth1: Tx queue start entry 70 dirty entry 66. > +kernel: eth1: Tx descriptor 0 is 0008a06a. > +kernel: eth1: Tx descriptor 1 is 0008a03c. > +kernel: eth1: Tx descriptor 2 is 0008a03c. (queue head) > +kernel: eth1: Tx descriptor 3 is 0008a03c. > +kernel: eth1: link up, 10Mbps, full-duplex, lpa 0x4061 > +kernel: NETDEV WATCHDOG: eth1: transmit timed out > +kernel: eth1: Transmit timeout, status 0d 0004 c07f media 18. > +kernel: eth1: Tx queue start entry 4 dirty entry 0. > +kernel: eth1: Tx descriptor 0 is 0008a062. (queue head) > +kernel: eth1: Tx descriptor 1 is 0008a062. > +kernel: eth1: Tx descriptor 2 is 0008a03c. > +kernel: eth1: Tx descriptor 3 is 0008a03c. > +kernel: eth1: link up, 10Mbps, full-duplex, lpa 0x4061 > +pppd[3535]: No response to 5 echo-requests > +pppd[3535]: Serial link appears to be disconnected. > +pppd[3535]: Couldn't increase MTU to 1500 > +pppd[3535]: Couldn't increase MRU to 1500 > +pppd[3535]: Script /etc/ppp/ip-down finished (pid 11312), status = 0x0 > +pppd[3535]: Connection terminated. > +pppd[3535]: Connect time 2.1 minutes. > +pppd[3535]: Sent 3160 bytes, received 8797 bytes. > +kernel: NETDEV WATCHDOG: eth1: transmit timed out > +kernel: eth1: Transmit timeout, status 0c 0005 c07f media 18. > +kernel: eth1: Tx queue start entry 4 dirty entry 0. > +kernel: eth1: Tx descriptor 0 is 0008a03c. (queue head) > +kernel: eth1: Tx descriptor 1 is 0008a03c. > +kernel: eth1: Tx descriptor 2 is 0008a03c. > +kernel: eth1: Tx descriptor 3 is 0008a03c. > +kernel: eth1: link up, 10Mbps, full-duplex, lpa 0x4061 > +pppd[3535]: Timeout waiting for PADO packets > +pppd[3535]: Unable to complete PPPoE Discovery > +kernel: NETDEV WATCHDOG: eth1: transmit timed out > +kernel: eth1: Transmit timeout, status 0c 0005 c07f media 18. > +kernel: eth1: Tx queue start entry 4 dirty entry 0. > +kernel: eth1: Tx descriptor 0 is 0008a03c. (queue head) > +kernel: eth1: Tx descriptor 1 is 0008a03c. > +kernel: eth1: Tx descriptor 2 is 0008a03c. > +kernel: eth1: Tx descriptor 3 is 0008a03c. > +kernel: eth1: link up, 10Mbps, full-duplex, lpa 0x4061 > +pppd[3535]: Timeout waiting for PADO packets > +pppd[3535]: Unable to complete PPPoE Discovery > +pppd[3535]: Timeout waiting for PADO packets > +pppd[3535]: Unable to complete PPPoE Discovery > Ralf -- P: Linus Torvalds patch-2.2.4 -S: Buried alive in diapers +S: Buried alive in reporters ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 (8139too interrupt) 2004-11-18 20:46 ` Ralf Gerbig @ 2004-11-19 7:48 ` Dave Airlie 2004-11-19 8:12 ` Dave Airlie 0 siblings, 1 reply; 23+ messages in thread From: Dave Airlie @ 2004-11-19 7:48 UTC (permalink / raw) To: Ralf Gerbig; +Cc: Andrew Morton, Dave Jones, linux-kernel > > investigating further, radeon.ko nukes the NIC / INT > hmm I can't see what could be majorly different between 2.6.9-mm1 and 2.6.10-rc2-mm2 with the DRM apart from core/personality split and that shouldn't affect the IRQ code I've just reviewed it another time but can see nothing in this area, Can you try on 2.6.10-rc2-mm2 from runlevel 3 modprobe drm echo 1 > /sys/module/drm/parameters/debug modprobe radeon and get the dmesg it should be a lot more verbose.. does the IRQ die at this point? if not start X running and send me the X startup log from /var/log and the dmesg.. Thanks, Dave. ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 (8139too interrupt) 2004-11-19 7:48 ` Dave Airlie @ 2004-11-19 8:12 ` Dave Airlie 2004-11-23 7:55 ` Dave Airlie 0 siblings, 1 reply; 23+ messages in thread From: Dave Airlie @ 2004-11-19 8:12 UTC (permalink / raw) To: Ralf Gerbig; +Cc: Andrew Morton, Dave Jones, linux-kernel > > > > investigating further, radeon.ko nukes the NIC / INT > > > btw I'm running 2.6.10-rc1 on my machine with a shared radeon IRQ no problems, 11: 2542086 XT-PIC uhci_hcd, uhci_hcd, eth0, radeon@pci:0000:01:00.0 I'll see if I can get time to grab Andrews tree over the weekend and build it locally.... Dave. ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 (8139too interrupt) 2004-11-19 8:12 ` Dave Airlie @ 2004-11-23 7:55 ` Dave Airlie 0 siblings, 0 replies; 23+ messages in thread From: Dave Airlie @ 2004-11-23 7:55 UTC (permalink / raw) To: Ralf Gerbig; +Cc: Andrew Morton, Dave Jones, linux-kernel > I'll see if I can get time to grab Andrews tree over the weekend and > build it locally.... Just for anyone following this thread the fix is on the way into the drm-2.6 tree for Andrews next release, the pci_enable_device for the drm was in the wrong place in the new split tree, moving it up a couple of lines to where it should be, fixes this issue.. Dave. ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-16 9:42 2.6.10-rc2-mm1 Andrew Morton ` (3 preceding siblings ...) 2004-11-17 11:04 ` 2.6.10-rc2-mm1 (8139too interrupt) Ralf Gerbig @ 2004-11-17 11:32 ` William Lee Irwin III 2004-11-17 12:34 ` 2.6.10-rc2-mm1 William Lee Irwin III 2004-11-17 20:53 ` 2.6.10-rc2-mm1 Grzegorz Piotr Jaskiewicz 5 siblings, 1 reply; 23+ messages in thread From: William Lee Irwin III @ 2004-11-17 11:32 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel On Tue, Nov 16, 2004 at 01:42:13AM -0800, Andrew Morton wrote: > http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.10-rc2-mm1.gz > will appear soon at > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc2/2.6.10-rc2-mm1/ > - Various little fixes and features. Nothing major here. Dies at boot on sparc64 repeatedly printk'ing some PROMLIB message. Hunting for the offending patch... -- wli ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-17 11:32 ` 2.6.10-rc2-mm1 William Lee Irwin III @ 2004-11-17 12:34 ` William Lee Irwin III 2004-11-17 12:56 ` 2.6.10-rc2-mm1 William Lee Irwin III 0 siblings, 1 reply; 23+ messages in thread From: William Lee Irwin III @ 2004-11-17 12:34 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel On Wed, Nov 17, 2004 at 03:32:25AM -0800, William Lee Irwin III wrote: > Dies at boot on sparc64 repeatedly printk'ing some PROMLIB message. > Hunting for the offending patch... Also present in virgin 2.6.10-rc2. Now applying benh's sunzilog.c fix and seeing if it helps. -- wli ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-17 12:34 ` 2.6.10-rc2-mm1 William Lee Irwin III @ 2004-11-17 12:56 ` William Lee Irwin III 2004-11-18 10:22 ` 2.6.10-rc2-mm1 William Lee Irwin III 0 siblings, 1 reply; 23+ messages in thread From: William Lee Irwin III @ 2004-11-17 12:56 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel On Wed, Nov 17, 2004 at 03:32:25AM -0800, William Lee Irwin III wrote: >> Dies at boot on sparc64 repeatedly printk'ing some PROMLIB message. >> Hunting for the offending patch... On Wed, Nov 17, 2004 at 04:34:01AM -0800, William Lee Irwin III wrote: > Also present in virgin 2.6.10-rc2. Now applying benh's sunzilog.c fix > and seeing if it helps. It does not appear to have helped. So bk snapshot searching it is. =( -- wli ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-17 12:56 ` 2.6.10-rc2-mm1 William Lee Irwin III @ 2004-11-18 10:22 ` William Lee Irwin III 2004-11-18 10:31 ` 2.6.10-rc2-mm1 Andrew Morton 0 siblings, 1 reply; 23+ messages in thread From: William Lee Irwin III @ 2004-11-18 10:22 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel On Wed, Nov 17, 2004 at 04:56:24AM -0800, William Lee Irwin III wrote: > It does not appear to have helped. So bk snapshot searching it is. =( sparc64 broke between 2.6.9 and 2.6.10-rc1. Are there any split-up diffs of what went on between 2.6.9 and 2.6.10-rc1? -- wli ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-18 10:22 ` 2.6.10-rc2-mm1 William Lee Irwin III @ 2004-11-18 10:31 ` Andrew Morton 2004-11-19 7:57 ` 2.6.10-rc2-mm1 William Lee Irwin III 0 siblings, 1 reply; 23+ messages in thread From: Andrew Morton @ 2004-11-18 10:31 UTC (permalink / raw) To: William Lee Irwin III; +Cc: linux-kernel William Lee Irwin III <wli@holomorphy.com> wrote: > > On Wed, Nov 17, 2004 at 04:56:24AM -0800, William Lee Irwin III wrote: > > It does not appear to have helped. So bk snapshot searching it is. =( > > sparc64 broke between 2.6.9 and 2.6.10-rc1. Are there any split-up > diffs of what went on between 2.6.9 and 2.6.10-rc1? > That'll be hard to do, because 2.6.9->2.6.10-rc1 was one of those brief periods of frenetic patchbombing. You could try 2.6.9-rc4-mm1 and if the bug is there, try 2.6.9-rc4-mm1's linus.patch and if the bug is not there, iterate though 2.6.9-rc4-mm1's patches. If the bug isn't in 2.6.9-rc4-mm1 I guess you're down to a binary search with `bk clone'. It might be a bit easier with bkcvs actually. ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-18 10:31 ` 2.6.10-rc2-mm1 Andrew Morton @ 2004-11-19 7:57 ` William Lee Irwin III 0 siblings, 0 replies; 23+ messages in thread From: William Lee Irwin III @ 2004-11-19 7:57 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel William Lee Irwin III <wli@holomorphy.com> wrote: >> sparc64 broke between 2.6.9 and 2.6.10-rc1. Are there any split-up >> diffs of what went on between 2.6.9 and 2.6.10-rc1? On Thu, Nov 18, 2004 at 02:31:23AM -0800, Andrew Morton wrote: > That'll be hard to do, because 2.6.9->2.6.10-rc1 was one of those brief > periods of frenetic patchbombing. > You could try 2.6.9-rc4-mm1 and if the bug is there, try 2.6.9-rc4-mm1's > linus.patch and if the bug is not there, iterate though 2.6.9-rc4-mm1's > patches. > If the bug isn't in 2.6.9-rc4-mm1 I guess you're down to a binary search > with `bk clone'. It might be a bit easier with bkcvs actually. I got it narrowed down to the exact patch and bad interaction, then davem spotted the right thing to do instantly, so this one's closed. -- wli ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.10-rc2-mm1 2004-11-16 9:42 2.6.10-rc2-mm1 Andrew Morton ` (4 preceding siblings ...) 2004-11-17 11:32 ` 2.6.10-rc2-mm1 William Lee Irwin III @ 2004-11-17 20:53 ` Grzegorz Piotr Jaskiewicz 5 siblings, 0 replies; 23+ messages in thread From: Grzegorz Piotr Jaskiewicz @ 2004-11-17 20:53 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel it OOpses here: <1>Unable to handle kernel NULL pointer dereference at virtual address 0000003c printing eip: c021bab5 *pde = 00000000 Oops: 0000 [#9] Modules linked in: af_packet ipv6 binfmt_misc apm pcmcia ohci_hcd ehci_hcd i2c_pi ix4 usblp uhci_hcd usbcore snd_cs46xx snd_rawmidi snd_seq_device snd_ac97_codec 3c59x mii yenta_socket pcmcia_core in tel_agp agpgart parport_pc parport 8250_pnp 8250 serial_core irtty_sir sir_dev irda evdev snd_pcm_oss snd_pcm snd_tim er snd_page_alloc snd_mixer_oss snd nvram rtc CPU: 0 EIP: 0060:[get_nonexclusive_access+21/64] Not tainted VLI EFLAGS: 00210286 (2.6.10-rc2-mm1) EIP is at get_nonexclusive_access+0x15/0x40 eax: 00000000 ebx: da77a710 ecx: da085ea0 edx: da77a6b8 esi: da77a6e0 edi: da77a6b8 ebp: da085e50 esp: da085e50 ds: 007b es: 007b ss: 0068 Process kreadconfig (pid: 3964, threadinfo=da084000 task=db094aa0) Stack: da085e74 c021a79a da77a6b8 0000000f 00000000 dec1c000 c021a760 d9d857bc 00000000 da085eb0 c014613c da55bddc b75ef000 da085ea0 da085eb0 da085e9c c01d7fbe da085eb0 00000004 da77a7b0 00000001 da08db74 df799280 b75ef000 Call Trace: [show_stack+127/160] show_stack+0x7f/0xa0 [show_registers+342/464] show_registers+0x156/0x1d0 [die+200/336] die+0xc8/0x150 [do_page_fault+1186/1754] do_page_fault+0x4a2/0x6da [error_code+43/48] error_code+0x2b/0x30 [unix_file_filemap_nopage+58/128] unix_file_filemap_nopage+0x3a/0x80 [do_no_page+156/656] do_no_page+0x9c/0x290 [handle_mm_fault+278/384] handle_mm_fault+0x116/0x180 [do_page_fault+576/1754] do_page_fault+0x240/0x6da [error_code+43/48] error_code+0x2b/0x30 Code: 00 0f c1 10 0f 85 f4 10 00 00 5d c3 8d 76 00 8d bc 27 00 00 00 00 55 b8 00 e0 ff ff 89 e5 21 e0 8b 00 8b 55 08 8b 80 b8 04 00 00 <8b> 40 3c 8b 48 08 85 c9 75 0c 89 d0 ff 00 0f 88 d3 10 00 00 5d and more, when KDE starts. My account is on reiser4 fs, if that matters. -- GJ -rwxr-xr-x 1 root 5.89824e37 Oct 22 1990 /usr/bin/emacs ^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2004-11-23 7:55 UTC | newest] Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2004-11-16 9:42 2.6.10-rc2-mm1 Andrew Morton 2004-11-16 16:48 ` 2.6.10-rc2-mm1 - SELinux atomic_dec_and_test() bug James Morris 2004-11-16 21:30 ` 2.6.10-rc2-mm1 Lee Revell 2004-11-17 2:22 ` 2.6.10-rc2-mm1 Andrew Morton 2004-11-17 2:28 ` 2.6.10-rc2-mm1 Lee Revell 2004-11-17 3:21 ` 2.6.10-rc2-mm1 Dave Airlie 2004-11-17 3:23 ` 2.6.10-rc2-mm1 Lee Revell 2004-11-17 22:08 ` 2.6.10-rc2-mm1 Dave Airlie 2004-11-16 21:38 ` 2.6.10-rc2-mm1 Lee Revell 2004-11-17 11:04 ` 2.6.10-rc2-mm1 (8139too interrupt) Ralf Gerbig 2004-11-17 19:06 ` Andrew Morton 2004-11-17 22:18 ` Ralf Gerbig 2004-11-18 20:46 ` Ralf Gerbig 2004-11-19 7:48 ` Dave Airlie 2004-11-19 8:12 ` Dave Airlie 2004-11-23 7:55 ` Dave Airlie 2004-11-17 11:32 ` 2.6.10-rc2-mm1 William Lee Irwin III 2004-11-17 12:34 ` 2.6.10-rc2-mm1 William Lee Irwin III 2004-11-17 12:56 ` 2.6.10-rc2-mm1 William Lee Irwin III 2004-11-18 10:22 ` 2.6.10-rc2-mm1 William Lee Irwin III 2004-11-18 10:31 ` 2.6.10-rc2-mm1 Andrew Morton 2004-11-19 7:57 ` 2.6.10-rc2-mm1 William Lee Irwin III 2004-11-17 20:53 ` 2.6.10-rc2-mm1 Grzegorz Piotr Jaskiewicz
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).