LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: andy.gross@linaro.org, robh@kernel.org, viresh.kumar@linaro.org,
	sboyd@kernel.org, ulf.hansson@linaro.org,
	collinsd@codeaurora.org, mka@chromium.org
Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, henryc.chen@mediatek.com,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v11 4/9] soc: qcom: rpmpd: Add a Power domain driver to model corners
Date: Thu, 10 Jan 2019 09:32:04 +0530
Message-ID: <20190110040209.6028-5-rnayak@codeaurora.org> (raw)
In-Reply-To: <20190110040209.6028-1-rnayak@codeaurora.org>

The Power domains for corners just pass the performance state set by the
consumers to the RPM (Remote Power manager) which then takes care
of setting the appropriate voltage on the corresponding rails to
meet the performance needs.

We add all power domain data needed on msm8996 here. This driver can easily
be extended by adding data for other qualcomm SoCs as well.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/soc/qcom/Kconfig  |   9 ++
 drivers/soc/qcom/Makefile |   1 +
 drivers/soc/qcom/rpmpd.c  | 282 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 292 insertions(+)
 create mode 100644 drivers/soc/qcom/rpmpd.c

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index fcbf8a2e4080..df5cd9fa0d5e 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -98,6 +98,15 @@ config QCOM_RPMH
 	  of hardware components aggregate requests for these resources and
 	  help apply the aggregated state on the resource.
 
+config QCOM_RPMPD
+	bool "Qualcomm RPM Power domain driver"
+	depends on MFD_QCOM_RPM && QCOM_SMD_RPM
+	help
+	  QCOM RPM Power domain driver to support power-domains with
+	  performance states. The driver communicates a performance state
+	  value to RPM which then translates it into corresponding voltage
+	  for the voltage rail.
+
 config QCOM_SMEM
 	tristate "Qualcomm Shared Memory Manager (SMEM)"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index f25b54cd6cf8..f1b25fdcf2ad 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
 obj-$(CONFIG_QCOM_APR) += apr.o
 obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
 obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
+obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
new file mode 100644
index 000000000000..7715ba7c9157
--- /dev/null
+++ b/drivers/soc/qcom/rpmpd.c
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/pm_domain.h>
+#include <linux/mfd/qcom_rpm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/smd-rpm.h>
+
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+#define domain_to_rpmpd(domain) container_of(domain, struct rpmpd, pd)
+
+/* Resource types */
+#define RPMPD_SMPA 0x61706d73
+#define RPMPD_LDOA 0x616f646c
+
+/* Operation Keys */
+#define KEY_CORNER		0x6e726f63 /* corn */
+#define KEY_ENABLE		0x6e657773 /* swen */
+#define KEY_FLOOR_CORNER	0x636676   /* vfc */
+
+#define DEFINE_RPMPD_CORNER_SMPA(_platform, _name, _active, r_id)		\
+	static struct rpmpd _platform##_##_active;			\
+	static struct rpmpd _platform##_##_name = {			\
+		.pd = {	.name = #_name,	},				\
+		.peer = &_platform##_##_active,				\
+		.res_type = RPMPD_SMPA,					\
+		.res_id = r_id,						\
+		.key = KEY_CORNER,					\
+	};								\
+	static struct rpmpd _platform##_##_active = {			\
+		.pd = { .name = #_active, },				\
+		.peer = &_platform##_##_name,				\
+		.active_only = true,					\
+		.res_type = RPMPD_SMPA,					\
+		.res_id = r_id,						\
+		.key = KEY_CORNER,					\
+	}
+
+#define DEFINE_RPMPD_CORNER_LDOA(_platform, _name, r_id)			\
+	static struct rpmpd _platform##_##_name = {			\
+		.pd = { .name = #_name, },				\
+		.res_type = RPMPD_LDOA,					\
+		.res_id = r_id,						\
+		.key = KEY_CORNER,					\
+	}
+
+#define DEFINE_RPMPD_VFC(_platform, _name, r_id, r_type)		\
+	static struct rpmpd _platform##_##_name = {			\
+		.pd = { .name = #_name, },				\
+		.res_type = r_type,					\
+		.res_id = r_id,						\
+		.key = KEY_FLOOR_CORNER,				\
+	}
+
+#define DEFINE_RPMPD_VFC_SMPA(_platform, _name, r_id)			\
+	DEFINE_RPMPD_VFC(_platform, _name, r_id, RPMPD_SMPA)
+
+#define DEFINE_RPMPD_VFC_LDOA(_platform, _name, r_id)			\
+	DEFINE_RPMPD_VFC(_platform, _name, r_id, RPMPD_LDOA)
+
+struct rpmpd_req {
+	__le32 key;
+	__le32 nbytes;
+	__le32 value;
+};
+
+struct rpmpd {
+	struct generic_pm_domain pd;
+	struct rpmpd *peer;
+	const bool active_only;
+	unsigned int corner;
+	bool enabled;
+	const char *res_name;
+	const int res_type;
+	const int res_id;
+	struct qcom_smd_rpm *rpm;
+	__le32 key;
+};
+
+struct rpmpd_desc {
+	struct rpmpd **rpmpds;
+	size_t num_pds;
+};
+
+static DEFINE_MUTEX(rpmpd_lock);
+
+/* msm8996 RPM Power domains */
+DEFINE_RPMPD_CORNER_SMPA(msm8996, vddcx, vddcx_ao, 1);
+DEFINE_RPMPD_CORNER_SMPA(msm8996, vddmx, vddmx_ao, 2);
+DEFINE_RPMPD_CORNER_LDOA(msm8996, vddsscx, 26);
+
+DEFINE_RPMPD_VFC_SMPA(msm8996, vddcx_vfc, 1);
+DEFINE_RPMPD_VFC_LDOA(msm8996, vddsscx_vfc, 26);
+
+static struct rpmpd *msm8996_rpmpds[] = {
+	[MSM8996_VDDCX] =	&msm8996_vddcx,
+	[MSM8996_VDDCX_AO] =	&msm8996_vddcx_ao,
+	[MSM8996_VDDCX_VFC] =	&msm8996_vddcx_vfc,
+	[MSM8996_VDDMX] =	&msm8996_vddmx,
+	[MSM8996_VDDMX_AO] =	&msm8996_vddmx_ao,
+	[MSM8996_VDDSSCX] =	&msm8996_vddsscx,
+	[MSM8996_VDDSSCX_VFC] =	&msm8996_vddsscx_vfc,
+};
+
+static const struct rpmpd_desc msm8996_desc = {
+	.rpmpds = msm8996_rpmpds,
+	.num_pds = ARRAY_SIZE(msm8996_rpmpds),
+};
+
+static const struct of_device_id rpmpd_match_table[] = {
+	{ .compatible = "qcom,msm8996-rpmpd", .data = &msm8996_desc },
+	{ }
+};
+
+static int rpmpd_send_enable(struct rpmpd *pd, bool enable)
+{
+	struct rpmpd_req req = {
+		.key = KEY_ENABLE,
+		.nbytes = cpu_to_le32(sizeof(u32)),
+		.value = cpu_to_le32(enable),
+	};
+
+	return qcom_rpm_smd_write(pd->rpm, QCOM_RPM_ACTIVE_STATE, pd->res_type,
+				  pd->res_id, &req, sizeof(req));
+}
+
+static int rpmpd_send_corner(struct rpmpd *pd, int state, unsigned int corner)
+{
+	struct rpmpd_req req = {
+		.key = pd->key,
+		.nbytes = cpu_to_le32(sizeof(u32)),
+		.value = cpu_to_le32(corner),
+	};
+
+	return qcom_rpm_smd_write(pd->rpm, state, pd->res_type, pd->res_id,
+				  &req, sizeof(req));
+};
+
+static void to_active_sleep(struct rpmpd *pd, unsigned int corner,
+			    unsigned int *active, unsigned int *sleep)
+{
+	*active = corner;
+
+	if (pd->active_only)
+		*sleep = 0;
+	else
+		*sleep = *active;
+}
+
+static int rpmpd_aggregate_corner(struct rpmpd *pd)
+{
+	int ret;
+	struct rpmpd *peer = pd->peer;
+	unsigned int active_corner, sleep_corner;
+	unsigned int this_active_corner = 0, this_sleep_corner = 0;
+	unsigned int peer_active_corner = 0, peer_sleep_corner = 0;
+
+	to_active_sleep(pd, pd->corner, &this_active_corner, &this_sleep_corner);
+
+	if (peer && peer->enabled)
+		to_active_sleep(peer, peer->corner, &peer_active_corner,
+				&peer_sleep_corner);
+
+	active_corner = max(this_active_corner, peer_active_corner);
+
+	ret = rpmpd_send_corner(pd, QCOM_RPM_ACTIVE_STATE, active_corner);
+	if (ret)
+		return ret;
+
+	sleep_corner = max(this_sleep_corner, peer_sleep_corner);
+
+	return rpmpd_send_corner(pd, QCOM_RPM_SLEEP_STATE, sleep_corner);
+}
+
+static int rpmpd_power_on(struct generic_pm_domain *domain)
+{
+	int ret;
+	struct rpmpd *pd = domain_to_rpmpd(domain);
+
+	mutex_lock(&rpmpd_lock);
+
+	ret = rpmpd_send_enable(pd, true);
+	if (ret)
+		goto out;
+
+	pd->enabled = true;
+
+	if (pd->corner)
+		ret = rpmpd_aggregate_corner(pd);
+
+out:
+	mutex_unlock(&rpmpd_lock);
+
+	return ret;
+}
+
+static int rpmpd_power_off(struct generic_pm_domain *domain)
+{
+	int ret;
+	struct rpmpd *pd = domain_to_rpmpd(domain);
+
+	mutex_lock(&rpmpd_lock);
+
+	ret = rpmpd_send_enable(pd, false);
+	if (!ret)
+		pd->enabled = false;
+
+	mutex_unlock(&rpmpd_lock);
+
+	return ret;
+}
+
+static int rpmpd_probe(struct platform_device *pdev)
+{
+	int i;
+	size_t num;
+	struct genpd_onecell_data *data;
+	struct qcom_smd_rpm *rpm;
+	struct rpmpd **rpmpds;
+	const struct rpmpd_desc *desc;
+
+	rpm = dev_get_drvdata(pdev->dev.parent);
+	if (!rpm) {
+		dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
+		return -ENODEV;
+	}
+
+	desc = of_device_get_match_data(&pdev->dev);
+	if (!desc)
+		return -EINVAL;
+
+	rpmpds = desc->rpmpds;
+	num = desc->num_pds;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->domains = devm_kcalloc(&pdev->dev, num, sizeof(*data->domains),
+				     GFP_KERNEL);
+	data->num_domains = num;
+
+	for (i = 0; i < num; i++) {
+		if (!rpmpds[i]) {
+			dev_warn(&pdev->dev, "rpmpds[] with empty entry at index=%d\n",
+				 i);
+			continue;
+		}
+
+		rpmpds[i]->rpm = rpm;
+		rpmpds[i]->pd.power_off = rpmpd_power_off;
+		rpmpds[i]->pd.power_on = rpmpd_power_on;
+		pm_genpd_init(&rpmpds[i]->pd, NULL, true);
+
+		data->domains[i] = &rpmpds[i]->pd;
+	}
+
+	return of_genpd_add_provider_onecell(pdev->dev.of_node, data);
+}
+
+static struct platform_driver rpmpd_driver = {
+	.driver = {
+		.name = "qcom-rpmpd",
+		.of_match_table = rpmpd_match_table,
+		.suppress_bind_attrs = true,
+	},
+	.probe = rpmpd_probe,
+};
+
+static int __init rpmpd_init(void)
+{
+	return platform_driver_register(&rpmpd_driver);
+}
+core_initcall(rpmpd_init);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


  parent reply index

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-10  4:02 [PATCH v11 0/9] Add power domain driver for corners on msm8996/sdm845 Rajendra Nayak
2019-01-10  4:02 ` [PATCH v11 1/9] dt-bindings: opp: Introduce opp-level bindings Rajendra Nayak
2019-01-10  6:26   ` Viresh Kumar
2019-01-11 19:06   ` Stephen Boyd
2019-01-11 22:16   ` Doug Anderson
2019-01-15 19:59   ` Rob Herring
2019-01-10  4:02 ` [PATCH v11 2/9] OPP: Add support for parsing the 'opp-level' property Rajendra Nayak
2019-01-10  6:29   ` Viresh Kumar
2019-01-11 19:06   ` Stephen Boyd
2019-01-10  4:02 ` [PATCH v11 3/9] dt-bindings: power: Add qcom rpm power domain driver bindings Rajendra Nayak
2019-01-10  4:02 ` Rajendra Nayak [this message]
2019-01-17 17:42   ` [PATCH v11 4/9] soc: qcom: rpmpd: Add a Power domain driver to model corners Guenter Roeck
2019-01-18  4:54     ` Rajendra Nayak
2019-01-10  4:02 ` [PATCH v11 5/9] soc: qcom: rpmpd: Add support for get/set performance state Rajendra Nayak
2019-01-10  4:02 ` [PATCH v11 6/9] arm64: dts: msm8996: Add rpmpd device node Rajendra Nayak
2019-01-10  4:02 ` [PATCH v11 7/9] soc: qcom: rpmhpd: Add RPMh power domain driver Rajendra Nayak
2019-01-10  4:02 ` [PATCH v11 8/9] arm64: dts: sdm845: Add rpmh powercontroller node Rajendra Nayak
2019-01-10  4:02 ` [PATCH v11 9/9] soc: qcom: rpmhpd: Mark mx as a parent for cx Rajendra Nayak
2019-01-10  6:33 ` [PATCH v11 0/9] Add power domain driver for corners on msm8996/sdm845 Viresh Kumar
2019-01-16  5:52   ` Bjorn Andersson
2019-01-16 15:18     ` Ulf Hansson
2019-01-17  4:24     ` Viresh Kumar
2019-01-17 15:03 ` Marc Gonzalez
2019-01-18  3:54   ` Rajendra Nayak
2019-01-18 10:17     ` Marc Gonzalez
2019-01-21  9:20       ` Rajendra Nayak

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190110040209.6028-5-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=collinsd@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=henryc.chen@mediatek.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox