From: Patrick Bellasi <patrick.bellasi@arm.com>
To: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
linux-api@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>,
Peter Zijlstra <peterz@infradead.org>, Tejun Heo <tj@kernel.org>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
Vincent Guittot <vincent.guittot@linaro.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
Paul Turner <pjt@google.com>,
Quentin Perret <quentin.perret@arm.com>,
Dietmar Eggemann <dietmar.eggemann@arm.com>,
Morten Rasmussen <morten.rasmussen@arm.com>,
Juri Lelli <juri.lelli@redhat.com>, Todd Kjos <tkjos@google.com>,
Joel Fernandes <joelaf@google.com>,
Steve Muckle <smuckle@google.com>,
Suren Baghdasaryan <surenb@google.com>
Subject: [PATCH v6 15/16] sched/core: uclamp: Use TG's clamps to restrict TASK's clamps
Date: Tue, 15 Jan 2019 10:15:12 +0000 [thread overview]
Message-ID: <20190115101513.2822-16-patrick.bellasi@arm.com> (raw)
In-Reply-To: <20190115101513.2822-1-patrick.bellasi@arm.com>
When a task specific clamp value is configured via sched_setattr(2),
this value is accounted in the corresponding clamp bucket every time the
task is {en,de}qeued. However, when cgroups are also in use, the task
specific clamp values could be restricted by the task_group (TG)
clamp values.
Update uclamp_cpu_inc() to aggregate task and TG clamp values. Every
time a task is enqueued, it's accounted in the clamp_bucket defining the
smaller clamp between the task specific value and its TG effective
value. This allows to:
1. ensure cgroup clamps are always used to restrict task specific
requests, i.e. boosted only up to the effective granted value or
clamped at least to a certain value
2. implement a "nice-like" policy, where tasks are still allowed to
request less then what enforced by their current TG
This mimics what already happens for a task's CPU affinity mask when the
task is also in a cpuset, i.e. cgroup attributes are always used to
restrict per-task attributes.
Do this by exploiting the concept of "effective" clamp, which is already
used by a TG to track parent enforced restrictions.
Apply task group clamp restrictions only to tasks belonging to a child
group. While, for tasks in the root group or in an autogroup, only
system defaults are enforced.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
---
Changes in v6:
Others:
- wholesale s/group/bucket/
---
include/linux/sched.h | 10 ++++++++++
kernel/sched/core.c | 42 +++++++++++++++++++++++++++++++++++++++++-
2 files changed, 51 insertions(+), 1 deletion(-)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 3f02128fe6b2..bb4e3b1085f9 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -602,6 +602,7 @@ struct sched_dl_entity {
* @bucket_id: the bucket index used by the fast-path
* @mapped: the bucket index is valid
* @active: the se is currently refcounted in a CPU's clamp bucket
+ * @user_defined: calmp value explicitly required from user-space
*
* A utilization clamp bucket maps a:
* clamp value (value), i.e.
@@ -619,12 +620,21 @@ struct sched_dl_entity {
* The active bit is set whenever a task has got an effective clamp bucket
* and value assigned, and it allows to know a task is actually refcounting a
* CPU's clamp bucket.
+ *
+ * The user_defined bit is set whenever a task has got a task-specific clamp
+ * value requested from userspace, i.e. the system defaults apply to this
+ * task just as a restriction. This allows to relax TG's clamps when a less
+ * restrictive task specific value has been defined, thus allowing to
+ * implement a "nice" semantic when both task bucket and task specific values
+ * are used. For example, a task running on a 20% boosted TG can still drop
+ * its own boosting to 0%.
*/
struct uclamp_se {
unsigned int value : bits_per(SCHED_CAPACITY_SCALE);
unsigned int bucket_id : bits_per(UCLAMP_BUCKETS);
unsigned int mapped : 1;
unsigned int active : 1;
+ unsigned int user_defined : 1;
/*
* Clamp bucket and value actually used by a scheduling entity,
* i.e. a (RUNNABLE) task or a task group.
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 734b769db2ca..c8d1fc9880ff 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -845,10 +845,23 @@ static inline void uclamp_cpu_update(struct rq *rq, unsigned int clamp_id,
WRITE_ONCE(rq->uclamp[clamp_id].value, max_value);
}
+static inline bool uclamp_apply_defaults(struct task_struct *p)
+{
+ if (!IS_ENABLED(CONFIG_UCLAMP_TASK_GROUP))
+ return true;
+ if (task_group_is_autogroup(task_group(p)))
+ return true;
+ if (task_group(p) == &root_task_group)
+ return true;
+ return false;
+}
+
/*
* The effective clamp bucket index of a task depends on, by increasing
* priority:
* - the task specific clamp value, explicitly requested from userspace
+ * - the task group effective clamp value, for tasks not in the root group or
+ * in an autogroup
* - the system default clamp value, defined by the sysadmin
*
* As a side effect, update the task's effective value:
@@ -865,6 +878,29 @@ uclamp_effective_get(struct task_struct *p, unsigned int clamp_id,
*clamp_value = p->uclamp[clamp_id].value;
*bucket_id = p->uclamp[clamp_id].bucket_id;
+ if (!uclamp_apply_defaults(p)) {
+#ifdef CONFIG_UCLAMP_TASK_GROUP
+ unsigned int clamp_max, bucket_max;
+ struct uclamp_se *tg_clamp;
+
+ tg_clamp = &task_group(p)->uclamp[clamp_id];
+ clamp_max = tg_clamp->effective.value;
+ bucket_max = tg_clamp->effective.bucket_id;
+
+ if (!p->uclamp[clamp_id].user_defined ||
+ *clamp_value > clamp_max) {
+ *clamp_value = clamp_max;
+ *bucket_id = bucket_max;
+ }
+#endif
+ /*
+ * If we have task groups and we are running in a child group,
+ * system default does not apply anymore since we assume task
+ * group clamps are properly configured.
+ */
+ return;
+ }
+
/* RT tasks have different default values */
default_clamp = task_has_rt_policy(p)
? uclamp_default_perf
@@ -1223,10 +1259,12 @@ static int __setscheduler_uclamp(struct task_struct *p,
mutex_lock(&uclamp_mutex);
if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP_MIN) {
+ p->uclamp[UCLAMP_MIN].user_defined = true;
uclamp_bucket_inc(p, &p->uclamp[UCLAMP_MIN],
UCLAMP_MIN, lower_bound);
}
if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP_MAX) {
+ p->uclamp[UCLAMP_MAX].user_defined = true;
uclamp_bucket_inc(p, &p->uclamp[UCLAMP_MAX],
UCLAMP_MAX, upper_bound);
}
@@ -1259,8 +1297,10 @@ static void uclamp_fork(struct task_struct *p, bool reset)
for (clamp_id = 0; clamp_id < UCLAMP_CNT; ++clamp_id) {
unsigned int clamp_value = p->uclamp[clamp_id].value;
- if (unlikely(reset))
+ if (unlikely(reset)) {
clamp_value = uclamp_none(clamp_id);
+ p->uclamp[clamp_id].user_defined = false;
+ }
p->uclamp[clamp_id].mapped = false;
p->uclamp[clamp_id].active = false;
--
2.19.2
next prev parent reply other threads:[~2019-01-15 10:16 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-15 10:14 [PATCH v6 00/16] Add utilization clamping support Patrick Bellasi
2019-01-15 10:14 ` [PATCH v6 01/16] sched/core: Allow sched_setattr() to use the current policy Patrick Bellasi
2019-01-25 13:56 ` Alessio Balsini
2019-01-15 10:14 ` [PATCH v6 02/16] sched/core: uclamp: Extend sched_setattr() to support utilization clamping Patrick Bellasi
2019-01-15 10:15 ` [PATCH v6 03/16] sched/core: uclamp: Map TASK's clamp values into CPU's clamp buckets Patrick Bellasi
2019-01-21 10:15 ` Peter Zijlstra
2019-01-21 12:27 ` Patrick Bellasi
2019-01-21 12:51 ` Peter Zijlstra
2019-01-21 15:05 ` Peter Zijlstra
2019-01-21 15:34 ` Patrick Bellasi
2019-01-15 10:15 ` [PATCH v6 04/16] sched/core: uclamp: Add CPU's clamp buckets refcounting Patrick Bellasi
2019-01-21 14:59 ` Peter Zijlstra
2019-01-21 15:23 ` Patrick Bellasi
2019-01-21 16:12 ` Peter Zijlstra
2019-01-21 16:33 ` Patrick Bellasi
2019-01-22 9:45 ` Peter Zijlstra
2019-01-22 10:31 ` Patrick Bellasi
2019-01-21 15:17 ` Peter Zijlstra
2019-01-21 15:54 ` Patrick Bellasi
2019-01-22 10:03 ` Peter Zijlstra
2019-01-22 10:53 ` Patrick Bellasi
2019-01-15 10:15 ` [PATCH v6 05/16] sched/core: uclamp: Update CPU's refcount on clamp changes Patrick Bellasi
2019-01-21 15:33 ` Peter Zijlstra
2019-01-21 15:44 ` Patrick Bellasi
2019-01-22 9:37 ` Peter Zijlstra
2019-01-22 10:43 ` Patrick Bellasi
2019-01-22 13:28 ` Peter Zijlstra
2019-01-22 14:01 ` Patrick Bellasi
2019-01-22 14:57 ` Peter Zijlstra
2019-01-22 15:33 ` Patrick Bellasi
2019-01-23 9:16 ` Peter Zijlstra
2019-01-23 14:14 ` Patrick Bellasi
2019-01-23 18:59 ` Peter Zijlstra
2019-01-24 11:21 ` Patrick Bellasi
2019-01-24 12:38 ` Peter Zijlstra
2019-01-15 10:15 ` [PATCH v6 06/16] sched/core: uclamp: Enforce last task UCLAMP_MAX Patrick Bellasi
2019-01-15 10:15 ` [PATCH v6 07/16] sched/core: uclamp: Add system default clamps Patrick Bellasi
2019-01-22 13:56 ` Peter Zijlstra
2019-01-22 14:43 ` Patrick Bellasi
2019-01-22 15:13 ` Peter Zijlstra
2019-01-22 15:41 ` Patrick Bellasi
2019-01-23 9:22 ` Peter Zijlstra
2019-01-23 14:19 ` Patrick Bellasi
2019-01-23 19:10 ` Peter Zijlstra
2019-01-15 10:15 ` [PATCH v6 08/16] sched/cpufreq: uclamp: Add utilization clamping for FAIR tasks Patrick Bellasi
2019-01-22 10:37 ` Rafael J. Wysocki
2019-01-22 11:02 ` Patrick Bellasi
2019-01-22 11:04 ` Rafael J. Wysocki
2019-01-22 11:27 ` Patrick Bellasi
2019-01-22 15:21 ` Peter Zijlstra
2019-01-22 15:45 ` Patrick Bellasi
2019-01-22 17:13 ` Peter Zijlstra
2019-01-22 18:18 ` Patrick Bellasi
2019-01-23 9:52 ` Peter Zijlstra
2019-01-23 14:24 ` Patrick Bellasi
2019-01-15 10:15 ` [PATCH v6 09/16] sched/cpufreq: uclamp: Add utilization clamping for RT tasks Patrick Bellasi
2019-01-22 12:30 ` Quentin Perret
2019-01-22 12:37 ` Patrick Bellasi
2019-01-23 10:28 ` Peter Zijlstra
2019-01-23 14:33 ` Patrick Bellasi
2019-01-23 10:49 ` Peter Zijlstra
2019-01-23 14:40 ` Patrick Bellasi
2019-01-23 20:11 ` Peter Zijlstra
2019-01-24 12:30 ` Patrick Bellasi
2019-01-24 12:38 ` Patrick Bellasi
2019-01-24 15:12 ` Peter Zijlstra
2019-01-24 16:00 ` Patrick Bellasi
2019-01-24 15:31 ` Peter Zijlstra
2019-01-24 16:14 ` Patrick Bellasi
2019-01-24 15:33 ` Peter Zijlstra
2019-01-24 15:15 ` Peter Zijlstra
2019-01-24 16:05 ` Patrick Bellasi
2019-01-15 10:15 ` [PATCH v6 10/16] sched/core: Add uclamp_util_with() Patrick Bellasi
2019-01-23 13:33 ` Peter Zijlstra
2019-01-23 14:51 ` Patrick Bellasi
2019-01-23 19:22 ` Peter Zijlstra
2019-01-15 10:15 ` [PATCH v6 11/16] sched/fair: Add uclamp support to energy_compute() Patrick Bellasi
2019-01-22 12:13 ` Quentin Perret
2019-01-22 12:45 ` Patrick Bellasi
2019-01-22 13:29 ` Quentin Perret
2019-01-22 14:26 ` Patrick Bellasi
2019-01-22 14:39 ` Quentin Perret
2019-01-22 15:01 ` Patrick Bellasi
2019-01-22 15:14 ` Quentin Perret
2019-01-15 10:15 ` [PATCH v6 12/16] sched/core: uclamp: Extend CPU's cgroup controller Patrick Bellasi
2019-01-15 10:15 ` [PATCH v6 13/16] sched/core: uclamp: Propagate parent clamps Patrick Bellasi
2019-01-15 10:15 ` [PATCH v6 14/16] sched/core: uclamp: Map TG's clamp values into CPU's clamp buckets Patrick Bellasi
2019-01-15 10:15 ` Patrick Bellasi [this message]
2019-01-15 10:15 ` [PATCH v6 16/16] sched/core: uclamp: Update CPU's refcount on TG's clamp changes Patrick Bellasi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190115101513.2822-16-patrick.bellasi@arm.com \
--to=patrick.bellasi@arm.com \
--cc=dietmar.eggemann@arm.com \
--cc=joelaf@google.com \
--cc=juri.lelli@redhat.com \
--cc=linux-api@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=morten.rasmussen@arm.com \
--cc=peterz@infradead.org \
--cc=pjt@google.com \
--cc=quentin.perret@arm.com \
--cc=rafael.j.wysocki@intel.com \
--cc=smuckle@google.com \
--cc=surenb@google.com \
--cc=tj@kernel.org \
--cc=tkjos@google.com \
--cc=vincent.guittot@linaro.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).